app/test-crypto-perf/cperf_test_latency.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2016-2017 Intel Corporation
   3  */
   4
   5 #include <rte_malloc.h>
   6 #include <rte_cycles.h>
   7 #include <rte_crypto.h>
   8 #include <rte_cryptodev.h>
   9
  10 #include "cperf_test_latency.h"
  11 #include "cperf_ops.h"
  12 #include "cperf_test_common.h"
  13
  14 struct cperf_op_result {
  15         uint64_t tsc_start;
  16         uint64_t tsc_end;
  17         enum rte_crypto_op_status status;
  18 };
  19
  20 struct cperf_latency_ctx {
  21         uint8_t dev_id;
  22         uint16_t qp_id;
  23         uint8_t lcore_id;
  24
  25         struct rte_mempool *pool;
  26
  27         struct rte_cryptodev_sym_session *sess;
  28
  29         cperf_populate_ops_t populate_ops;
  30
  31         uint32_t src_buf_offset;
  32         uint32_t dst_buf_offset;
  33
  34         const struct cperf_options *options;
  35         const struct cperf_test_vector *test_vector;
  36         struct cperf_op_result *res;
  37 };
  38
  39 struct priv_op_data {
  40         struct cperf_op_result *result;
  41 };
  42
  43 static void
  44 cperf_latency_test_free(struct cperf_latency_ctx *ctx)
  45 {
  46         if (ctx) {
  47                 if (ctx->sess) {
  48                         rte_cryptodev_sym_session_clear(ctx->dev_id, ctx->sess);
  49                         rte_cryptodev_sym_session_free(ctx->sess);
  50                 }
  51
  52                 rte_mempool_free(ctx->pool);
  53
  54                 rte_free(ctx->res);
  55                 rte_free(ctx);
  56         }
  57 }
  58
  59 void *
  60 cperf_latency_test_constructor(struct rte_mempool *sess_mp,
  61                 struct rte_mempool *sess_priv_mp,
  62                 uint8_t dev_id, uint16_t qp_id,
  63                 const struct cperf_options *options,
  64                 const struct cperf_test_vector *test_vector,
  65                 const struct cperf_op_fns *op_fns)
  66 {
  67         struct cperf_latency_ctx *ctx = NULL;
  68         size_t extra_op_priv_size = sizeof(struct priv_op_data);
  69
  70         ctx = rte_malloc(NULL, sizeof(struct cperf_latency_ctx), 0);
  71         if (ctx == NULL)
  72                 goto err;
  73
  74         ctx->dev_id = dev_id;
  75         ctx->qp_id = qp_id;
  76
  77         ctx->populate_ops = op_fns->populate_ops;
  78         ctx->options = options;
  79         ctx->test_vector = test_vector;
  80
  81         /* IV goes at the end of the crypto operation */
  82         uint16_t iv_offset = sizeof(struct rte_crypto_op) +
  83                 sizeof(struct rte_crypto_sym_op) +
  84                 sizeof(struct cperf_op_result *);
  85
  86         ctx->sess = op_fns->sess_create(sess_mp, sess_priv_mp, dev_id, options,
  87                         test_vector, iv_offset);
  88         if (ctx->sess == NULL)
  89                 goto err;
  90
  91         if (cperf_alloc_common_memory(options, test_vector, dev_id, qp_id,
  92                         extra_op_priv_size,
  93                         &ctx->src_buf_offset, &ctx->dst_buf_offset,
  94                         &ctx->pool) < 0)
  95                 goto err;
  96
  97         ctx->res = rte_malloc(NULL, sizeof(struct cperf_op_result) *
  98                         ctx->options->total_ops, 0);
  99
 100         if (ctx->res == NULL)
 101                 goto err;
 102
 103         return ctx;
 104 err:
 105         cperf_latency_test_free(ctx);
 106
 107         return NULL;
 108 }
 109
 110 static inline void
 111 store_timestamp(struct rte_crypto_op *op, uint64_t timestamp)
 112 {
 113         struct priv_op_data *priv_data;
 114
 115         priv_data = (struct priv_op_data *) (op->sym + 1);
 116         priv_data->result->status = op->status;
 117         priv_data->result->tsc_end = timestamp;
 118 }
 119
 120 int
 121 cperf_latency_test_runner(void *arg)
 122 {
 123         struct cperf_latency_ctx *ctx = arg;
 124         uint16_t test_burst_size;
 125         uint8_t burst_size_idx = 0;
 126         uint32_t imix_idx = 0;
 127
 128         static uint16_t display_once;
 129
 130         if (ctx == NULL)
 131                 return 0;
 132
 133         struct rte_crypto_op *ops[ctx->options->max_burst_size];
 134         struct rte_crypto_op *ops_processed[ctx->options->max_burst_size];
 135         uint64_t i;
 136         struct priv_op_data *priv_data;
 137
 138         uint32_t lcore = rte_lcore_id();
 139
 140 #ifdef CPERF_LINEARIZATION_ENABLE
 141         struct rte_cryptodev_info dev_info;
 142         int linearize = 0;
 143
 144         /* Check if source mbufs require coalescing */
 145         if (ctx->options->segment_sz < ctx->options->max_buffer_size) {
 146                 rte_cryptodev_info_get(ctx->dev_id, &dev_info);
 147                 if ((dev_info.feature_flags &
 148                                 RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER) == 0)
 149                         linearize = 1;
 150         }
 151 #endif /* CPERF_LINEARIZATION_ENABLE */
 152
 153         ctx->lcore_id = lcore;
 154
 155         /* Warm up the host CPU before starting the test */
 156         for (i = 0; i < ctx->options->total_ops; i++)
 157                 rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
 158
 159         /* Get first size from range or list */
 160         if (ctx->options->inc_burst_size != 0)
 161                 test_burst_size = ctx->options->min_burst_size;
 162         else
 163                 test_burst_size = ctx->options->burst_size_list[0];
 164
 165         uint16_t iv_offset = sizeof(struct rte_crypto_op) +
 166                 sizeof(struct rte_crypto_sym_op) +
 167                 sizeof(struct cperf_op_result *);
 168
 169         while (test_burst_size <= ctx->options->max_burst_size) {
 170                 uint64_t ops_enqd = 0, ops_deqd = 0;
 171                 uint64_t b_idx = 0;
 172
 173                 uint64_t tsc_val, tsc_end, tsc_start;
 174                 uint64_t tsc_max = 0, tsc_min = ~0UL, tsc_tot = 0, tsc_idx = 0;
 175                 uint64_t enqd_max = 0, enqd_min = ~0UL, enqd_tot = 0;
 176                 uint64_t deqd_max = 0, deqd_min = ~0UL, deqd_tot = 0;
 177
 178                 while (enqd_tot < ctx->options->total_ops) {
 179
 180                         uint16_t burst_size = ((enqd_tot + test_burst_size)
 181                                         <= ctx->options->total_ops) ?
 182                                                         test_burst_size :
 183                                                         ctx->options->total_ops -
 184                                                         enqd_tot;
 185
 186                         /* Allocate objects containing crypto operations and mbufs */
 187                         if (rte_mempool_get_bulk(ctx->pool, (void **)ops,
 188                                                 burst_size) != 0) {
 189                                 RTE_LOG(ERR, USER1,
 190                                         "Failed to allocate more crypto operations "
 191                                         "from the crypto operation pool.\n"
 192                                         "Consider increasing the pool size "
 193                                         "with --pool-sz\n");
 194                                 return -1;
 195                         }
 196
 197                         /* Setup crypto op, attach mbuf etc */
 198                         (ctx->populate_ops)(ops, ctx->src_buf_offset,
 199                                         ctx->dst_buf_offset,
 200                                         burst_size, ctx->sess, ctx->options,
 201                                         ctx->test_vector, iv_offset,
 202                                         &imix_idx, &tsc_start);
 203
 204                         /* Populate the mbuf with the test vector */
 205                         for (i = 0; i < burst_size; i++)
 206                                 cperf_mbuf_set(ops[i]->sym->m_src,
 207                                                 ctx->options,
 208                                                 ctx->test_vector);
 209
 210                         tsc_start = rte_rdtsc_precise();
 211
 212 #ifdef CPERF_LINEARIZATION_ENABLE
 213                         if (linearize) {
 214                                 /* PMD doesn't support scatter-gather and source buffer
 215                                  * is segmented.
 216                                  * We need to linearize it before enqueuing.
 217                                  */
 218                                 for (i = 0; i < burst_size; i++)
 219                                         rte_pktmbuf_linearize(ops[i]->sym->m_src);
 220                         }
 221 #endif /* CPERF_LINEARIZATION_ENABLE */
 222
 223                         /* Enqueue burst of ops on crypto device */
 224                         ops_enqd = rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id,
 225                                         ops, burst_size);
 226
 227                         /* Dequeue processed burst of ops from crypto device */
 228                         ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
 229                                         ops_processed, test_burst_size);
 230
 231                         tsc_end = rte_rdtsc_precise();
 232
 233                         /* Free memory for not enqueued operations */
 234                         if (ops_enqd != burst_size)
 235                                 rte_mempool_put_bulk(ctx->pool,
 236                                                 (void **)&ops[ops_enqd],
 237                                                 burst_size - ops_enqd);
 238
 239                         for (i = 0; i < ops_enqd; i++) {
 240                                 ctx->res[tsc_idx].tsc_start = tsc_start;
 241                                 /*
 242                                  * Private data structure starts after the end of the
 243                                  * rte_crypto_sym_op structure.
 244                                  */
 245                                 priv_data = (struct priv_op_data *) (ops[i]->sym + 1);
 246                                 priv_data->result = (void *)&ctx->res[tsc_idx];
 247                                 tsc_idx++;
 248                         }
 249
 250                         if (likely(ops_deqd))  {
 251                                 /* Free crypto ops so they can be reused. */
 252                                 for (i = 0; i < ops_deqd; i++)
 253                                         store_timestamp(ops_processed[i], tsc_end);
 254
 255                                 rte_mempool_put_bulk(ctx->pool,
 256                                                 (void **)ops_processed, ops_deqd);
 257
 258                                 deqd_tot += ops_deqd;
 259                                 deqd_max = RTE_MAX(ops_deqd, deqd_max);
 260                                 deqd_min = RTE_MIN(ops_deqd, deqd_min);
 261                         }
 262
 263                         enqd_tot += ops_enqd;
 264                         enqd_max = RTE_MAX(ops_enqd, enqd_max);
 265                         enqd_min = RTE_MIN(ops_enqd, enqd_min);
 266
 267                         b_idx++;
 268                 }
 269
 270                 /* Dequeue any operations still in the crypto device */
 271                 while (deqd_tot < ctx->options->total_ops) {
 272                         /* Sending 0 length burst to flush sw crypto device */
 273                         rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
 274
 275                         /* dequeue burst */
 276                         ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
 277                                         ops_processed, test_burst_size);
 278
 279                         tsc_end = rte_rdtsc_precise();
 280
 281                         if (ops_deqd != 0) {
 282                                 for (i = 0; i < ops_deqd; i++)
 283                                         store_timestamp(ops_processed[i], tsc_end);
 284
 285                                 rte_mempool_put_bulk(ctx->pool,
 286                                                 (void **)ops_processed, ops_deqd);
 287
 288                                 deqd_tot += ops_deqd;
 289                                 deqd_max = RTE_MAX(ops_deqd, deqd_max);
 290                                 deqd_min = RTE_MIN(ops_deqd, deqd_min);
 291                         }
 292                 }
 293
 294                 for (i = 0; i < tsc_idx; i++) {
 295                         tsc_val = ctx->res[i].tsc_end - ctx->res[i].tsc_start;
 296                         tsc_max = RTE_MAX(tsc_val, tsc_max);
 297                         tsc_min = RTE_MIN(tsc_val, tsc_min);
 298                         tsc_tot += tsc_val;
 299                 }
 300
 301                 double time_tot, time_avg, time_max, time_min;
 302
 303                 const uint64_t tunit = 1000000; /* us */
 304                 const uint64_t tsc_hz = rte_get_tsc_hz();
 305
 306                 uint64_t enqd_avg = enqd_tot / b_idx;
 307                 uint64_t deqd_avg = deqd_tot / b_idx;
 308                 uint64_t tsc_avg = tsc_tot / tsc_idx;
 309
 310                 time_tot = tunit*(double)(tsc_tot) / tsc_hz;
 311                 time_avg = tunit*(double)(tsc_avg) / tsc_hz;
 312                 time_max = tunit*(double)(tsc_max) / tsc_hz;
 313                 time_min = tunit*(double)(tsc_min) / tsc_hz;
 314
 315                 uint16_t exp = 0;
 316                 if (ctx->options->csv) {
 317                         if (__atomic_compare_exchange_n(&display_once, &exp, 1, 0,
 318                                         __ATOMIC_RELAXED, __ATOMIC_RELAXED))
 319                                 printf("\n# lcore, Buffer Size, Burst Size, Pakt Seq #, "
 320                                                 "cycles, time (us)");
 321
 322                         for (i = 0; i < ctx->options->total_ops; i++) {
 323
 324                                 printf("\n%u,%u,%u,%"PRIu64",%"PRIu64",%.3f",
 325                                         ctx->lcore_id, ctx->options->test_buffer_size,
 326                                         test_burst_size, i + 1,
 327                                         ctx->res[i].tsc_end - ctx->res[i].tsc_start,
 328                                         tunit * (double) (ctx->res[i].tsc_end
 329                                                         - ctx->res[i].tsc_start)
 330                                                 / tsc_hz);
 331
 332                         }
 333                 } else {
 334                         printf("\n# Device %d on lcore %u\n", ctx->dev_id,
 335                                 ctx->lcore_id);
 336                         printf("\n# total operations: %u", ctx->options->total_ops);
 337                         printf("\n# Buffer size: %u", ctx->options->test_buffer_size);
 338                         printf("\n# Burst size: %u", test_burst_size);
 339                         printf("\n#     Number of bursts: %"PRIu64,
 340                                         b_idx);
 341
 342                         printf("\n#");
 343                         printf("\n#          \t       Total\t   Average\t   "
 344                                         "Maximum\t   Minimum");
 345                         printf("\n#  enqueued\t%12"PRIu64"\t%10"PRIu64"\t"
 346                                         "%10"PRIu64"\t%10"PRIu64, enqd_tot,
 347                                         enqd_avg, enqd_max, enqd_min);
 348                         printf("\n#  dequeued\t%12"PRIu64"\t%10"PRIu64"\t"
 349                                         "%10"PRIu64"\t%10"PRIu64, deqd_tot,
 350                                         deqd_avg, deqd_max, deqd_min);
 351                         printf("\n#    cycles\t%12"PRIu64"\t%10"PRIu64"\t"
 352                                         "%10"PRIu64"\t%10"PRIu64, tsc_tot,
 353                                         tsc_avg, tsc_max, tsc_min);
 354                         printf("\n# time [us]\t%12.0f\t%10.3f\t%10.3f\t%10.3f",
 355                                         time_tot, time_avg, time_max, time_min);
 356                         printf("\n\n");
 357
 358                 }
 359
 360                 /* Get next size from range or list */
 361                 if (ctx->options->inc_burst_size != 0)
 362                         test_burst_size += ctx->options->inc_burst_size;
 363                 else {
 364                         if (++burst_size_idx == ctx->options->burst_size_count)
 365                                 break;
 366                         test_burst_size =
 367                                 ctx->options->burst_size_list[burst_size_idx];
 368                 }
 369         }
 370
 371         return 0;
 372 }
 373
 374 void
 375 cperf_latency_test_destructor(void *arg)
 376 {
 377         struct cperf_latency_ctx *ctx = arg;
 378
 379         if (ctx == NULL)
 380                 return;
 381
 382         cperf_latency_test_free(ctx);
 383 }