app/test-flow-perf/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2020 Mellanox Technologies, Ltd
   3  *
   4  * This file contain the application main file
   5  * This application provides the user the ability to test the
   6  * insertion rate for specific rte_flow rule under stress state ~4M rule/
   7  *
   8  * Then it will also provide packet per second measurement after installing
   9  * all rules, the user may send traffic to test the PPS that match the rules
  10  * after all rules are installed, to check performance or functionality after
  11  * the stress.
  12  *
  13  * The flows insertion will go for all ports first, then it will print the
  14  * results, after that the application will go into forwarding packets mode
  15  * it will start receiving traffic if any and then forwarding it back and
  16  * gives packet per second measurement.
  17  */
  18
  19 #include <stdio.h>
  20 #include <stdlib.h>
  21 #include <string.h>
  22 #include <stdint.h>
  23 #include <inttypes.h>
  24 #include <stdarg.h>
  25 #include <errno.h>
  26 #include <getopt.h>
  27 #include <stdbool.h>
  28 #include <sys/time.h>
  29 #include <signal.h>
  30 #include <unistd.h>
  31
  32 #include <rte_malloc.h>
  33 #include <rte_mempool.h>
  34 #include <rte_mbuf.h>
  35 #include <rte_ethdev.h>
  36 #include <rte_flow.h>
  37 #include <rte_mtr.h>
  38
  39 #include "config.h"
  40 #include "flow_gen.h"
  41
  42 #define MAX_BATCHES_COUNT          100
  43 #define DEFAULT_RULES_COUNT    4000000
  44 #define DEFAULT_RULES_BATCH     100000
  45 #define DEFAULT_GROUP                0
  46
  47 struct rte_flow *flow;
  48 static uint8_t flow_group;
  49
  50 static uint64_t encap_data;
  51 static uint64_t decap_data;
  52
  53 static uint64_t flow_items[MAX_ITEMS_NUM];
  54 static uint64_t flow_actions[MAX_ACTIONS_NUM];
  55 static uint64_t flow_attrs[MAX_ATTRS_NUM];
  56 static uint8_t items_idx, actions_idx, attrs_idx;
  57
  58 static uint64_t ports_mask;
  59 static volatile bool force_quit;
  60 static bool dump_iterations;
  61 static bool delete_flag;
  62 static bool dump_socket_mem_flag;
  63 static bool enable_fwd;
  64 static bool unique_data;
  65
  66 static struct rte_mempool *mbuf_mp;
  67 static uint32_t nb_lcores;
  68 static uint32_t rules_count;
  69 static uint32_t rules_batch;
  70 static uint32_t hairpin_queues_num; /* total hairpin q number - default: 0 */
  71 static uint32_t nb_lcores;
  72
  73 #define MAX_PKT_BURST    32
  74 #define LCORE_MODE_PKT    1
  75 #define LCORE_MODE_STATS  2
  76 #define MAX_STREAMS      64
  77 #define METER_CREATE      1
  78 #define METER_DELETE      2
  79
  80 struct stream {
  81         int tx_port;
  82         int tx_queue;
  83         int rx_port;
  84         int rx_queue;
  85 };
  86
  87 struct lcore_info {
  88         int mode;
  89         int streams_nb;
  90         struct stream streams[MAX_STREAMS];
  91         /* stats */
  92         uint64_t tx_pkts;
  93         uint64_t tx_drops;
  94         uint64_t rx_pkts;
  95         struct rte_mbuf *pkts[MAX_PKT_BURST];
  96 } __rte_cache_aligned;
  97
  98 static struct lcore_info lcore_infos[RTE_MAX_LCORE];
  99
 100 struct used_cpu_time {
 101         double insertion[MAX_PORTS][RTE_MAX_LCORE];
 102         double deletion[MAX_PORTS][RTE_MAX_LCORE];
 103 };
 104
 105 struct multi_cores_pool {
 106         uint32_t cores_count;
 107         uint32_t rules_count;
 108         struct used_cpu_time meters_record;
 109         struct used_cpu_time flows_record;
 110         int64_t last_alloc[RTE_MAX_LCORE];
 111         int64_t current_alloc[RTE_MAX_LCORE];
 112 } __rte_cache_aligned;
 113
 114 static struct multi_cores_pool mc_pool = {
 115         .cores_count = 1,
 116 };
 117
 118 static void
 119 usage(char *progname)
 120 {
 121         printf("\nusage: %s\n", progname);
 122         printf("\nControl configurations:\n");
 123         printf("  --rules-count=N: to set the number of needed"
 124                 " rules to insert, default is %d\n", DEFAULT_RULES_COUNT);
 125         printf("  --rules-batch=N: set number of batched rules,"
 126                 " default is %d\n", DEFAULT_RULES_BATCH);
 127         printf("  --dump-iterations: To print rates for each"
 128                 " iteration\n");
 129         printf("  --deletion-rate: Enable deletion rate"
 130                 " calculations\n");
 131         printf("  --dump-socket-mem: To dump all socket memory\n");
 132         printf("  --enable-fwd: To enable packets forwarding"
 133                 " after insertion\n");
 134         printf("  --portmask=N: hexadecimal bitmask of ports used\n");
 135         printf("  --unique-data: flag to set using unique data for all"
 136                 " actions that support data, such as header modify and encap actions\n");
 137
 138         printf("To set flow attributes:\n");
 139         printf("  --ingress: set ingress attribute in flows\n");
 140         printf("  --egress: set egress attribute in flows\n");
 141         printf("  --transfer: set transfer attribute in flows\n");
 142         printf("  --group=N: set group for all flows,"
 143                 " default is %d\n", DEFAULT_GROUP);
 144         printf("  --cores=N: to set the number of needed "
 145                 "cores to insert rte_flow rules, default is 1\n");
 146
 147         printf("To set flow items:\n");
 148         printf("  --ether: add ether layer in flow items\n");
 149         printf("  --vlan: add vlan layer in flow items\n");
 150         printf("  --ipv4: add ipv4 layer in flow items\n");
 151         printf("  --ipv6: add ipv6 layer in flow items\n");
 152         printf("  --tcp: add tcp layer in flow items\n");
 153         printf("  --udp: add udp layer in flow items\n");
 154         printf("  --vxlan: add vxlan layer in flow items\n");
 155         printf("  --vxlan-gpe: add vxlan-gpe layer in flow items\n");
 156         printf("  --gre: add gre layer in flow items\n");
 157         printf("  --geneve: add geneve layer in flow items\n");
 158         printf("  --gtp: add gtp layer in flow items\n");
 159         printf("  --meta: add meta layer in flow items\n");
 160         printf("  --tag: add tag layer in flow items\n");
 161         printf("  --icmpv4: add icmpv4 layer in flow items\n");
 162         printf("  --icmpv6: add icmpv6 layer in flow items\n");
 163
 164         printf("To set flow actions:\n");
 165         printf("  --port-id: add port-id action in flow actions\n");
 166         printf("  --rss: add rss action in flow actions\n");
 167         printf("  --queue: add queue action in flow actions\n");
 168         printf("  --jump: add jump action in flow actions\n");
 169         printf("  --mark: add mark action in flow actions\n");
 170         printf("  --count: add count action in flow actions\n");
 171         printf("  --set-meta: add set meta action in flow actions\n");
 172         printf("  --set-tag: add set tag action in flow actions\n");
 173         printf("  --drop: add drop action in flow actions\n");
 174         printf("  --hairpin-queue=N: add hairpin-queue action in flow actions\n");
 175         printf("  --hairpin-rss=N: add hairpin-rss action in flow actions\n");
 176         printf("  --set-src-mac: add set src mac action to flow actions\n"
 177                 "Src mac to be set is random each flow\n");
 178         printf("  --set-dst-mac: add set dst mac action to flow actions\n"
 179                  "Dst mac to be set is random each flow\n");
 180         printf("  --set-src-ipv4: add set src ipv4 action to flow actions\n"
 181                 "Src ipv4 to be set is random each flow\n");
 182         printf("  --set-dst-ipv4 add set dst ipv4 action to flow actions\n"
 183                 "Dst ipv4 to be set is random each flow\n");
 184         printf("  --set-src-ipv6: add set src ipv6 action to flow actions\n"
 185                 "Src ipv6 to be set is random each flow\n");
 186         printf("  --set-dst-ipv6: add set dst ipv6 action to flow actions\n"
 187                 "Dst ipv6 to be set is random each flow\n");
 188         printf("  --set-src-tp: add set src tp action to flow actions\n"
 189                 "Src tp to be set is random each flow\n");
 190         printf("  --set-dst-tp: add set dst tp action to flow actions\n"
 191                 "Dst tp to be set is random each flow\n");
 192         printf("  --inc-tcp-ack: add inc tcp ack action to flow actions\n"
 193                 "tcp ack will be increments by 1\n");
 194         printf("  --dec-tcp-ack: add dec tcp ack action to flow actions\n"
 195                 "tcp ack will be decrements by 1\n");
 196         printf("  --inc-tcp-seq: add inc tcp seq action to flow actions\n"
 197                 "tcp seq will be increments by 1\n");
 198         printf("  --dec-tcp-seq: add dec tcp seq action to flow actions\n"
 199                 "tcp seq will be decrements by 1\n");
 200         printf("  --set-ttl: add set ttl action to flow actions\n"
 201                 "L3 ttl to be set is random each flow\n");
 202         printf("  --dec-ttl: add dec ttl action to flow actions\n"
 203                 "L3 ttl will be decrements by 1\n");
 204         printf("  --set-ipv4-dscp: add set ipv4 dscp action to flow actions\n"
 205                 "ipv4 dscp value to be set is random each flow\n");
 206         printf("  --set-ipv6-dscp: add set ipv6 dscp action to flow actions\n"
 207                 "ipv6 dscp value to be set is random each flow\n");
 208         printf("  --flag: add flag action to flow actions\n");
 209         printf("  --meter: add meter action to flow actions\n");
 210         printf("  --raw-encap=<data>: add raw encap action to flow actions\n"
 211                 "Data is the data needed to be encaped\n"
 212                 "Example: raw-encap=ether,ipv4,udp,vxlan\n");
 213         printf("  --raw-decap=<data>: add raw decap action to flow actions\n"
 214                 "Data is the data needed to be decaped\n"
 215                 "Example: raw-decap=ether,ipv4,udp,vxlan\n");
 216         printf("  --vxlan-encap: add vxlan-encap action to flow actions\n"
 217                 "Encapped data is fixed with pattern: ether,ipv4,udp,vxlan\n"
 218                 "With fixed values\n");
 219         printf("  --vxlan-decap: add vxlan_decap action to flow actions\n");
 220 }
 221
 222 static void
 223 args_parse(int argc, char **argv)
 224 {
 225         uint64_t pm;
 226         char **argvopt;
 227         char *token;
 228         char *end;
 229         int n, opt;
 230         int opt_idx;
 231         size_t i;
 232
 233         static const struct option_dict {
 234                 const char *str;
 235                 const uint64_t mask;
 236                 uint64_t *map;
 237                 uint8_t *map_idx;
 238
 239         } flow_options[] = {
 240                 {
 241                         .str = "ether",
 242                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ETH),
 243                         .map = &flow_items[0],
 244                         .map_idx = &items_idx
 245                 },
 246                 {
 247                         .str = "ipv4",
 248                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_IPV4),
 249                         .map = &flow_items[0],
 250                         .map_idx = &items_idx
 251                 },
 252                 {
 253                         .str = "ipv6",
 254                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_IPV6),
 255                         .map = &flow_items[0],
 256                         .map_idx = &items_idx
 257                 },
 258                 {
 259                         .str = "vlan",
 260                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VLAN),
 261                         .map = &flow_items[0],
 262                         .map_idx = &items_idx
 263                 },
 264                 {
 265                         .str = "tcp",
 266                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_TCP),
 267                         .map = &flow_items[0],
 268                         .map_idx = &items_idx
 269                 },
 270                 {
 271                         .str = "udp",
 272                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_UDP),
 273                         .map = &flow_items[0],
 274                         .map_idx = &items_idx
 275                 },
 276                 {
 277                         .str = "vxlan",
 278                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VXLAN),
 279                         .map = &flow_items[0],
 280                         .map_idx = &items_idx
 281                 },
 282                 {
 283                         .str = "vxlan-gpe",
 284                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VXLAN_GPE),
 285                         .map = &flow_items[0],
 286                         .map_idx = &items_idx
 287                 },
 288                 {
 289                         .str = "gre",
 290                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GRE),
 291                         .map = &flow_items[0],
 292                         .map_idx = &items_idx
 293                 },
 294                 {
 295                         .str = "geneve",
 296                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GENEVE),
 297                         .map = &flow_items[0],
 298                         .map_idx = &items_idx
 299                 },
 300                 {
 301                         .str = "gtp",
 302                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GTP),
 303                         .map = &flow_items[0],
 304                         .map_idx = &items_idx
 305                 },
 306                 {
 307                         .str = "meta",
 308                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_META),
 309                         .map = &flow_items[0],
 310                         .map_idx = &items_idx
 311                 },
 312                 {
 313                         .str = "tag",
 314                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_TAG),
 315                         .map = &flow_items[0],
 316                         .map_idx = &items_idx
 317                 },
 318                 {
 319                         .str = "icmpv4",
 320                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ICMP),
 321                         .map = &flow_items[0],
 322                         .map_idx = &items_idx
 323                 },
 324                 {
 325                         .str = "icmpv6",
 326                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ICMP6),
 327                         .map = &flow_items[0],
 328                         .map_idx = &items_idx
 329                 },
 330                 {
 331                         .str = "ingress",
 332                         .mask = INGRESS,
 333                         .map = &flow_attrs[0],
 334                         .map_idx = &attrs_idx
 335                 },
 336                 {
 337                         .str = "egress",
 338                         .mask = EGRESS,
 339                         .map = &flow_attrs[0],
 340                         .map_idx = &attrs_idx
 341                 },
 342                 {
 343                         .str = "transfer",
 344                         .mask = TRANSFER,
 345                         .map = &flow_attrs[0],
 346                         .map_idx = &attrs_idx
 347                 },
 348                 {
 349                         .str = "port-id",
 350                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_PORT_ID),
 351                         .map = &flow_actions[0],
 352                         .map_idx = &actions_idx
 353                 },
 354                 {
 355                         .str = "rss",
 356                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_RSS),
 357                         .map = &flow_actions[0],
 358                         .map_idx = &actions_idx
 359                 },
 360                 {
 361                         .str = "queue",
 362                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_QUEUE),
 363                         .map = &flow_actions[0],
 364                         .map_idx = &actions_idx
 365                 },
 366                 {
 367                         .str = "jump",
 368                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_JUMP),
 369                         .map = &flow_actions[0],
 370                         .map_idx = &actions_idx
 371                 },
 372                 {
 373                         .str = "mark",
 374                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_MARK),
 375                         .map = &flow_actions[0],
 376                         .map_idx = &actions_idx
 377                 },
 378                 {
 379                         .str = "count",
 380                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_COUNT),
 381                         .map = &flow_actions[0],
 382                         .map_idx = &actions_idx
 383                 },
 384                 {
 385                         .str = "set-meta",
 386                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_SET_META),
 387                         .map = &flow_actions[0],
 388                         .map_idx = &actions_idx
 389                 },
 390                 {
 391                         .str = "set-tag",
 392                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_SET_TAG),
 393                         .map = &flow_actions[0],
 394                         .map_idx = &actions_idx
 395                 },
 396                 {
 397                         .str = "drop",
 398                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_DROP),
 399                         .map = &flow_actions[0],
 400                         .map_idx = &actions_idx
 401                 },
 402                 {
 403                         .str = "set-src-mac",
 404                         .mask = FLOW_ACTION_MASK(
 405                                 RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
 406                         ),
 407                         .map = &flow_actions[0],
 408                         .map_idx = &actions_idx
 409                 },
 410                 {
 411                         .str = "set-dst-mac",
 412                         .mask = FLOW_ACTION_MASK(
 413                                 RTE_FLOW_ACTION_TYPE_SET_MAC_DST
 414                         ),
 415                         .map = &flow_actions[0],
 416                         .map_idx = &actions_idx
 417                 },
 418                 {
 419                         .str = "set-src-ipv4",
 420                         .mask = FLOW_ACTION_MASK(
 421                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
 422                         ),
 423                         .map = &flow_actions[0],
 424                         .map_idx = &actions_idx
 425                 },
 426                 {
 427                         .str = "set-dst-ipv4",
 428                         .mask = FLOW_ACTION_MASK(
 429                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
 430                         ),
 431                         .map = &flow_actions[0],
 432                         .map_idx = &actions_idx
 433                 },
 434                 {
 435                         .str = "set-src-ipv6",
 436                         .mask = FLOW_ACTION_MASK(
 437                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
 438                         ),
 439                         .map = &flow_actions[0],
 440                         .map_idx = &actions_idx
 441                 },
 442                 {
 443                         .str = "set-dst-ipv6",
 444                         .mask = FLOW_ACTION_MASK(
 445                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
 446                         ),
 447                         .map = &flow_actions[0],
 448                         .map_idx = &actions_idx
 449                 },
 450                 {
 451                         .str = "set-src-tp",
 452                         .mask = FLOW_ACTION_MASK(
 453                                 RTE_FLOW_ACTION_TYPE_SET_TP_SRC
 454                         ),
 455                         .map = &flow_actions[0],
 456                         .map_idx = &actions_idx
 457                 },
 458                 {
 459                         .str = "set-dst-tp",
 460                         .mask = FLOW_ACTION_MASK(
 461                                 RTE_FLOW_ACTION_TYPE_SET_TP_DST
 462                         ),
 463                         .map = &flow_actions[0],
 464                         .map_idx = &actions_idx
 465                 },
 466                 {
 467                         .str = "inc-tcp-ack",
 468                         .mask = FLOW_ACTION_MASK(
 469                                 RTE_FLOW_ACTION_TYPE_INC_TCP_ACK
 470                         ),
 471                         .map = &flow_actions[0],
 472                         .map_idx = &actions_idx
 473                 },
 474                 {
 475                         .str = "dec-tcp-ack",
 476                         .mask = FLOW_ACTION_MASK(
 477                                 RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK
 478                         ),
 479                         .map = &flow_actions[0],
 480                         .map_idx = &actions_idx
 481                 },
 482                 {
 483                         .str = "inc-tcp-seq",
 484                         .mask = FLOW_ACTION_MASK(
 485                                 RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ
 486                         ),
 487                         .map = &flow_actions[0],
 488                         .map_idx = &actions_idx
 489                 },
 490                 {
 491                         .str = "dec-tcp-seq",
 492                         .mask = FLOW_ACTION_MASK(
 493                                 RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ
 494                         ),
 495                         .map = &flow_actions[0],
 496                         .map_idx = &actions_idx
 497                 },
 498                 {
 499                         .str = "set-ttl",
 500                         .mask = FLOW_ACTION_MASK(
 501                                 RTE_FLOW_ACTION_TYPE_SET_TTL
 502                         ),
 503                         .map = &flow_actions[0],
 504                         .map_idx = &actions_idx
 505                 },
 506                 {
 507                         .str = "dec-ttl",
 508                         .mask = FLOW_ACTION_MASK(
 509                                 RTE_FLOW_ACTION_TYPE_DEC_TTL
 510                         ),
 511                         .map = &flow_actions[0],
 512                         .map_idx = &actions_idx
 513                 },
 514                 {
 515                         .str = "set-ipv4-dscp",
 516                         .mask = FLOW_ACTION_MASK(
 517                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
 518                         ),
 519                         .map = &flow_actions[0],
 520                         .map_idx = &actions_idx
 521                 },
 522                 {
 523                         .str = "set-ipv6-dscp",
 524                         .mask = FLOW_ACTION_MASK(
 525                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
 526                         ),
 527                         .map = &flow_actions[0],
 528                         .map_idx = &actions_idx
 529                 },
 530                 {
 531                         .str = "flag",
 532                         .mask = FLOW_ACTION_MASK(
 533                                 RTE_FLOW_ACTION_TYPE_FLAG
 534                         ),
 535                         .map = &flow_actions[0],
 536                         .map_idx = &actions_idx
 537                 },
 538                 {
 539                         .str = "meter",
 540                         .mask = FLOW_ACTION_MASK(
 541                                 RTE_FLOW_ACTION_TYPE_METER
 542                         ),
 543                         .map = &flow_actions[0],
 544                         .map_idx = &actions_idx
 545                 },
 546                 {
 547                         .str = "vxlan-encap",
 548                         .mask = FLOW_ACTION_MASK(
 549                                 RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP
 550                         ),
 551                         .map = &flow_actions[0],
 552                         .map_idx = &actions_idx
 553                 },
 554                 {
 555                         .str = "vxlan-decap",
 556                         .mask = FLOW_ACTION_MASK(
 557                                 RTE_FLOW_ACTION_TYPE_VXLAN_DECAP
 558                         ),
 559                         .map = &flow_actions[0],
 560                         .map_idx = &actions_idx
 561                 },
 562         };
 563
 564         static const struct option lgopts[] = {
 565                 /* Control */
 566                 { "help",                       0, 0, 0 },
 567                 { "rules-count",                1, 0, 0 },
 568                 { "rules-batch",                1, 0, 0 },
 569                 { "dump-iterations",            0, 0, 0 },
 570                 { "deletion-rate",              0, 0, 0 },
 571                 { "dump-socket-mem",            0, 0, 0 },
 572                 { "enable-fwd",                 0, 0, 0 },
 573                 { "unique-data",                0, 0, 0 },
 574                 { "portmask",                   1, 0, 0 },
 575                 { "cores",                      1, 0, 0 },
 576                 /* Attributes */
 577                 { "ingress",                    0, 0, 0 },
 578                 { "egress",                     0, 0, 0 },
 579                 { "transfer",                   0, 0, 0 },
 580                 { "group",                      1, 0, 0 },
 581                 /* Items */
 582                 { "ether",                      0, 0, 0 },
 583                 { "vlan",                       0, 0, 0 },
 584                 { "ipv4",                       0, 0, 0 },
 585                 { "ipv6",                       0, 0, 0 },
 586                 { "tcp",                        0, 0, 0 },
 587                 { "udp",                        0, 0, 0 },
 588                 { "vxlan",                      0, 0, 0 },
 589                 { "vxlan-gpe",                  0, 0, 0 },
 590                 { "gre",                        0, 0, 0 },
 591                 { "geneve",                     0, 0, 0 },
 592                 { "gtp",                        0, 0, 0 },
 593                 { "meta",                       0, 0, 0 },
 594                 { "tag",                        0, 0, 0 },
 595                 { "icmpv4",                     0, 0, 0 },
 596                 { "icmpv6",                     0, 0, 0 },
 597                 /* Actions */
 598                 { "port-id",                    0, 0, 0 },
 599                 { "rss",                        0, 0, 0 },
 600                 { "queue",                      0, 0, 0 },
 601                 { "jump",                       0, 0, 0 },
 602                 { "mark",                       0, 0, 0 },
 603                 { "count",                      0, 0, 0 },
 604                 { "set-meta",                   0, 0, 0 },
 605                 { "set-tag",                    0, 0, 0 },
 606                 { "drop",                       0, 0, 0 },
 607                 { "hairpin-queue",              1, 0, 0 },
 608                 { "hairpin-rss",                1, 0, 0 },
 609                 { "set-src-mac",                0, 0, 0 },
 610                 { "set-dst-mac",                0, 0, 0 },
 611                 { "set-src-ipv4",               0, 0, 0 },
 612                 { "set-dst-ipv4",               0, 0, 0 },
 613                 { "set-src-ipv6",               0, 0, 0 },
 614                 { "set-dst-ipv6",               0, 0, 0 },
 615                 { "set-src-tp",                 0, 0, 0 },
 616                 { "set-dst-tp",                 0, 0, 0 },
 617                 { "inc-tcp-ack",                0, 0, 0 },
 618                 { "dec-tcp-ack",                0, 0, 0 },
 619                 { "inc-tcp-seq",                0, 0, 0 },
 620                 { "dec-tcp-seq",                0, 0, 0 },
 621                 { "set-ttl",                    0, 0, 0 },
 622                 { "dec-ttl",                    0, 0, 0 },
 623                 { "set-ipv4-dscp",              0, 0, 0 },
 624                 { "set-ipv6-dscp",              0, 0, 0 },
 625                 { "flag",                       0, 0, 0 },
 626                 { "meter",                      0, 0, 0 },
 627                 { "raw-encap",                  1, 0, 0 },
 628                 { "raw-decap",                  1, 0, 0 },
 629                 { "vxlan-encap",                0, 0, 0 },
 630                 { "vxlan-decap",                0, 0, 0 },
 631         };
 632
 633         RTE_ETH_FOREACH_DEV(i)
 634                 ports_mask |= 1 << i;
 635
 636         hairpin_queues_num = 0;
 637         argvopt = argv;
 638
 639         printf(":: Flow -> ");
 640         while ((opt = getopt_long(argc, argvopt, "",
 641                                 lgopts, &opt_idx)) != EOF) {
 642                 switch (opt) {
 643                 case 0:
 644                         if (strcmp(lgopts[opt_idx].name, "help") == 0) {
 645                                 usage(argv[0]);
 646                                 exit(EXIT_SUCCESS);
 647                         }
 648
 649                         if (strcmp(lgopts[opt_idx].name, "group") == 0) {
 650                                 n = atoi(optarg);
 651                                 if (n >= 0)
 652                                         flow_group = n;
 653                                 else
 654                                         rte_exit(EXIT_FAILURE,
 655                                                 "flow group should be >= 0\n");
 656                                 printf("group %d / ", flow_group);
 657                         }
 658
 659                         for (i = 0; i < RTE_DIM(flow_options); i++)
 660                                 if (strcmp(lgopts[opt_idx].name,
 661                                                 flow_options[i].str) == 0) {
 662                                         flow_options[i].map[
 663                                         (*flow_options[i].map_idx)++] =
 664                                                 flow_options[i].mask;
 665                                         printf("%s / ", flow_options[i].str);
 666                                 }
 667
 668                         if (strcmp(lgopts[opt_idx].name,
 669                                         "hairpin-rss") == 0) {
 670                                 n = atoi(optarg);
 671                                 if (n > 0)
 672                                         hairpin_queues_num = n;
 673                                 else
 674                                         rte_exit(EXIT_FAILURE,
 675                                                 "Hairpin queues should be > 0\n");
 676
 677                                 flow_actions[actions_idx++] =
 678                                         HAIRPIN_RSS_ACTION;
 679                                 printf("hairpin-rss / ");
 680                         }
 681                         if (strcmp(lgopts[opt_idx].name,
 682                                         "hairpin-queue") == 0) {
 683                                 n = atoi(optarg);
 684                                 if (n > 0)
 685                                         hairpin_queues_num = n;
 686                                 else
 687                                         rte_exit(EXIT_FAILURE,
 688                                                 "Hairpin queues should be > 0\n");
 689
 690                                 flow_actions[actions_idx++] =
 691                                         HAIRPIN_QUEUE_ACTION;
 692                                 printf("hairpin-queue / ");
 693                         }
 694
 695                         if (strcmp(lgopts[opt_idx].name, "raw-encap") == 0) {
 696                                 printf("raw-encap ");
 697                                 flow_actions[actions_idx++] =
 698                                         FLOW_ITEM_MASK(
 699                                                 RTE_FLOW_ACTION_TYPE_RAW_ENCAP
 700                                         );
 701
 702                                 token = strtok(optarg, ",");
 703                                 while (token != NULL) {
 704                                         for (i = 0; i < RTE_DIM(flow_options); i++) {
 705                                                 if (strcmp(flow_options[i].str, token) == 0) {
 706                                                         printf("%s,", token);
 707                                                         encap_data |= flow_options[i].mask;
 708                                                         break;
 709                                                 }
 710                                                 /* Reached last item with no match */
 711                                                 if (i == (RTE_DIM(flow_options) - 1))
 712                                                         rte_exit(EXIT_FAILURE,
 713                                                                 "Invalid encap item: %s\n", token);
 714                                         }
 715                                         token = strtok(NULL, ",");
 716                                 }
 717                                 printf(" / ");
 718                         }
 719                         if (strcmp(lgopts[opt_idx].name, "raw-decap") == 0) {
 720                                 printf("raw-decap ");
 721                                 flow_actions[actions_idx++] =
 722                                         FLOW_ITEM_MASK(
 723                                                 RTE_FLOW_ACTION_TYPE_RAW_DECAP
 724                                         );
 725
 726                                 token = strtok(optarg, ",");
 727                                 while (token != NULL) {
 728                                         for (i = 0; i < RTE_DIM(flow_options); i++) {
 729                                                 if (strcmp(flow_options[i].str, token) == 0) {
 730                                                         printf("%s,", token);
 731                                                         decap_data |= flow_options[i].mask;
 732                                                         break;
 733                                                 }
 734                                                 /* Reached last item with no match */
 735                                                 if (i == (RTE_DIM(flow_options) - 1))
 736                                                         rte_exit(EXIT_FAILURE,
 737                                                                 "Invalid decap item %s\n", token);
 738                                         }
 739                                         token = strtok(NULL, ",");
 740                                 }
 741                                 printf(" / ");
 742                         }
 743                         /* Control */
 744                         if (strcmp(lgopts[opt_idx].name,
 745                                         "rules-batch") == 0) {
 746                                 n = atoi(optarg);
 747                                 if (n >= DEFAULT_RULES_BATCH)
 748                                         rules_batch = n;
 749                                 else {
 750                                         rte_exit(EXIT_FAILURE,
 751                                                 "rules_batch should be >= %d\n",
 752                                                 DEFAULT_RULES_BATCH);
 753                                 }
 754                         }
 755                         if (strcmp(lgopts[opt_idx].name,
 756                                         "rules-count") == 0) {
 757                                 n = atoi(optarg);
 758                                 if (n >= (int) rules_batch)
 759                                         rules_count = n;
 760                                 else {
 761                                         rte_exit(EXIT_FAILURE,
 762                                                 "rules_count should be >= %d\n",
 763                                                 rules_batch);
 764                                 }
 765                         }
 766                         if (strcmp(lgopts[opt_idx].name,
 767                                         "dump-iterations") == 0)
 768                                 dump_iterations = true;
 769                         if (strcmp(lgopts[opt_idx].name,
 770                                         "unique-data") == 0)
 771                                 unique_data = true;
 772                         if (strcmp(lgopts[opt_idx].name,
 773                                         "deletion-rate") == 0)
 774                                 delete_flag = true;
 775                         if (strcmp(lgopts[opt_idx].name,
 776                                         "dump-socket-mem") == 0)
 777                                 dump_socket_mem_flag = true;
 778                         if (strcmp(lgopts[opt_idx].name,
 779                                         "enable-fwd") == 0)
 780                                 enable_fwd = true;
 781                         if (strcmp(lgopts[opt_idx].name,
 782                                         "portmask") == 0) {
 783                                 /* parse hexadecimal string */
 784                                 end = NULL;
 785                                 pm = strtoull(optarg, &end, 16);
 786                                 if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
 787                                         rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
 788                                 ports_mask = pm;
 789                         }
 790                         if (strcmp(lgopts[opt_idx].name, "cores") == 0) {
 791                                 n = atoi(optarg);
 792                                 if ((int) rte_lcore_count() <= n) {
 793                                         rte_exit(EXIT_FAILURE,
 794                                                 "Error: you need %d cores to run on multi-cores\n"
 795                                                 "Existing cores are: %d\n", n, rte_lcore_count());
 796                                 }
 797                                 if (n <= RTE_MAX_LCORE && n > 0)
 798                                         mc_pool.cores_count = n;
 799                                 else {
 800                                         rte_exit(EXIT_FAILURE,
 801                                                 "Error: cores count must be > 0 and < %d\n",
 802                                                 RTE_MAX_LCORE);
 803                                 }
 804                         }
 805                         break;
 806                 default:
 807                         usage(argv[0]);
 808                         rte_exit(EXIT_FAILURE, "Invalid option: %s\n",
 809                                         argv[optind]);
 810                         break;
 811                 }
 812         }
 813         printf("end_flow\n");
 814 }
 815
 816 /* Dump the socket memory statistics on console */
 817 static size_t
 818 dump_socket_mem(FILE *f)
 819 {
 820         struct rte_malloc_socket_stats socket_stats;
 821         unsigned int i = 0;
 822         size_t total = 0;
 823         size_t alloc = 0;
 824         size_t free = 0;
 825         unsigned int n_alloc = 0;
 826         unsigned int n_free = 0;
 827         bool active_nodes = false;
 828
 829
 830         for (i = 0; i < RTE_MAX_NUMA_NODES; i++) {
 831                 if (rte_malloc_get_socket_stats(i, &socket_stats) ||
 832                     !socket_stats.heap_totalsz_bytes)
 833                         continue;
 834                 active_nodes = true;
 835                 total += socket_stats.heap_totalsz_bytes;
 836                 alloc += socket_stats.heap_allocsz_bytes;
 837                 free += socket_stats.heap_freesz_bytes;
 838                 n_alloc += socket_stats.alloc_count;
 839                 n_free += socket_stats.free_count;
 840                 if (dump_socket_mem_flag) {
 841                         fprintf(f, "::::::::::::::::::::::::::::::::::::::::");
 842                         fprintf(f,
 843                                 "\nSocket %u:\nsize(M) total: %.6lf\nalloc:"
 844                                 " %.6lf(%.3lf%%)\nfree: %.6lf"
 845                                 "\nmax: %.6lf"
 846                                 "\ncount alloc: %u\nfree: %u\n",
 847                                 i,
 848                                 socket_stats.heap_totalsz_bytes / 1.0e6,
 849                                 socket_stats.heap_allocsz_bytes / 1.0e6,
 850                                 (double)socket_stats.heap_allocsz_bytes * 100 /
 851                                 (double)socket_stats.heap_totalsz_bytes,
 852                                 socket_stats.heap_freesz_bytes / 1.0e6,
 853                                 socket_stats.greatest_free_size / 1.0e6,
 854                                 socket_stats.alloc_count,
 855                                 socket_stats.free_count);
 856                                 fprintf(f, "::::::::::::::::::::::::::::::::::::::::");
 857                 }
 858         }
 859         if (dump_socket_mem_flag && active_nodes) {
 860                 fprintf(f,
 861                         "\nTotal: size(M)\ntotal: %.6lf"
 862                         "\nalloc: %.6lf(%.3lf%%)\nfree: %.6lf"
 863                         "\ncount alloc: %u\nfree: %u\n",
 864                         total / 1.0e6, alloc / 1.0e6,
 865                         (double)alloc * 100 / (double)total, free / 1.0e6,
 866                         n_alloc, n_free);
 867                 fprintf(f, "::::::::::::::::::::::::::::::::::::::::\n");
 868         }
 869         return alloc;
 870 }
 871
 872 static void
 873 print_flow_error(struct rte_flow_error error)
 874 {
 875         printf("Flow can't be created %d message: %s\n",
 876                 error.type,
 877                 error.message ? error.message : "(no stated reason)");
 878 }
 879
 880 static inline void
 881 print_rules_batches(double *cpu_time_per_batch)
 882 {
 883         uint8_t idx;
 884         double delta;
 885         double rate;
 886
 887         for (idx = 0; idx < MAX_BATCHES_COUNT; idx++) {
 888                 if (!cpu_time_per_batch[idx])
 889                         break;
 890                 delta = (double)(rules_batch / cpu_time_per_batch[idx]);
 891                 rate = delta / 1000; /* Save rate in K unit. */
 892                 printf(":: Rules batch #%d: %d rules "
 893                         "in %f sec[ Rate = %f K Rule/Sec ]\n",
 894                         idx, rules_batch,
 895                         cpu_time_per_batch[idx], rate);
 896         }
 897 }
 898
 899
 900 static inline int
 901 has_meter(void)
 902 {
 903         int i;
 904
 905         for (i = 0; i < MAX_ACTIONS_NUM; i++) {
 906                 if (flow_actions[i] == 0)
 907                         break;
 908                 if (flow_actions[i]
 909                                 & FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_METER))
 910                         return 1;
 911         }
 912         return 0;
 913 }
 914
 915 static void
 916 create_meter_rule(int port_id, uint32_t counter)
 917 {
 918         int ret;
 919         struct rte_mtr_params params;
 920         uint32_t default_prof_id = 100;
 921         struct rte_mtr_error error;
 922
 923         memset(&params, 0, sizeof(struct rte_mtr_params));
 924         params.meter_enable = 1;
 925         params.stats_mask = 0xffff;
 926         params.use_prev_mtr_color = 0;
 927         params.dscp_table = NULL;
 928
 929         /*create meter*/
 930         params.meter_profile_id = default_prof_id;
 931         params.action[RTE_COLOR_GREEN] =
 932                 MTR_POLICER_ACTION_COLOR_GREEN;
 933         params.action[RTE_COLOR_YELLOW] =
 934                 MTR_POLICER_ACTION_COLOR_YELLOW;
 935         params.action[RTE_COLOR_RED] =
 936                 MTR_POLICER_ACTION_DROP;
 937
 938         ret = rte_mtr_create(port_id, counter, &params, 1, &error);
 939         if (ret != 0) {
 940                 printf("Port %u create meter idx(%d) error(%d) message: %s\n",
 941                         port_id, counter, error.type,
 942                         error.message ? error.message : "(no stated reason)");
 943                 rte_exit(EXIT_FAILURE, "Error in creating meter\n");
 944         }
 945 }
 946
 947 static void
 948 destroy_meter_rule(int port_id, uint32_t counter)
 949 {
 950         struct rte_mtr_error error;
 951
 952         if (rte_mtr_destroy(port_id, counter, &error)) {
 953                 printf("Port %u destroy meter(%d) error(%d) message: %s\n",
 954                         port_id, counter, error.type,
 955                         error.message ? error.message : "(no stated reason)");
 956                 rte_exit(EXIT_FAILURE, "Error in deleting meter rule\n");
 957         }
 958 }
 959
 960 static void
 961 meters_handler(int port_id, uint8_t core_id, uint8_t ops)
 962 {
 963         uint64_t start_batch;
 964         double cpu_time_used, insertion_rate;
 965         int rules_count_per_core, rules_batch_idx;
 966         uint32_t counter, start_counter = 0, end_counter;
 967         double cpu_time_per_batch[MAX_BATCHES_COUNT] = { 0 };
 968
 969         rules_count_per_core = rules_count / mc_pool.cores_count;
 970
 971         if (core_id)
 972                 start_counter = core_id * rules_count_per_core;
 973         end_counter = (core_id + 1) * rules_count_per_core;
 974
 975         cpu_time_used = 0;
 976         start_batch = rte_get_timer_cycles();
 977         for (counter = start_counter; counter < end_counter; counter++) {
 978                 if (ops == METER_CREATE)
 979                         create_meter_rule(port_id, counter);
 980                 else
 981                         destroy_meter_rule(port_id, counter);
 982                 /*
 983                  * Save the insertion rate for rules batch.
 984                  * Check if the insertion reached the rules
 985                  * patch counter, then save the insertion rate
 986                  * for this batch.
 987                  */
 988                 if (!((counter + 1) % rules_batch)) {
 989                         rules_batch_idx = ((counter + 1) / rules_batch) - 1;
 990                         cpu_time_per_batch[rules_batch_idx] =
 991                                 ((double)(rte_get_timer_cycles() - start_batch))
 992                                 / rte_get_timer_hz();
 993                         cpu_time_used += cpu_time_per_batch[rules_batch_idx];
 994                         start_batch = rte_get_timer_cycles();
 995                 }
 996         }
 997
 998         /* Print insertion rates for all batches */
 999         if (dump_iterations)
1000                 print_rules_batches(cpu_time_per_batch);
1001
1002         insertion_rate =
1003                 ((double) (rules_count_per_core / cpu_time_used) / 1000);
1004
1005         /* Insertion rate for all rules in one core */
1006         printf(":: Port %d :: Core %d Meter %s :: start @[%d] - end @[%d],"
1007                 " use:%.02fs, rate:%.02fk Rule/Sec\n",
1008                 port_id, core_id, ops == METER_CREATE ? "create" : "delete",
1009                 start_counter, end_counter - 1,
1010                 cpu_time_used, insertion_rate);
1011
1012         if (ops == METER_CREATE)
1013                 mc_pool.meters_record.insertion[port_id][core_id]
1014                         = cpu_time_used;
1015         else
1016                 mc_pool.meters_record.deletion[port_id][core_id]
1017                         = cpu_time_used;
1018 }
1019
1020 static void
1021 destroy_meter_profile(void)
1022 {
1023         struct rte_mtr_error error;
1024         uint16_t nr_ports;
1025         int port_id;
1026
1027         nr_ports = rte_eth_dev_count_avail();
1028         for (port_id = 0; port_id < nr_ports; port_id++) {
1029                 /* If port outside portmask */
1030                 if (!((ports_mask >> port_id) & 0x1))
1031                         continue;
1032
1033                 if (rte_mtr_meter_profile_delete
1034                         (port_id, DEFAULT_METER_PROF_ID, &error)) {
1035                         printf("Port %u del profile error(%d) message: %s\n",
1036                                 port_id, error.type,
1037                                 error.message ? error.message : "(no stated reason)");
1038                         rte_exit(EXIT_FAILURE, "Error: Destroy meter profile Failed!\n");
1039                 }
1040         }
1041 }
1042
1043 static void
1044 create_meter_profile(void)
1045 {
1046         uint16_t nr_ports;
1047         int ret, port_id;
1048         struct rte_mtr_meter_profile mp;
1049         struct rte_mtr_error error;
1050
1051         /*
1052          *currently , only create one meter file for one port
1053          *1 meter profile -> N meter rules -> N rte flows
1054          */
1055         memset(&mp, 0, sizeof(struct rte_mtr_meter_profile));
1056         nr_ports = rte_eth_dev_count_avail();
1057         for (port_id = 0; port_id < nr_ports; port_id++) {
1058                 /* If port outside portmask */
1059                 if (!((ports_mask >> port_id) & 0x1))
1060                         continue;
1061
1062                 mp.alg = RTE_MTR_SRTCM_RFC2697;
1063                 mp.srtcm_rfc2697.cir = METER_CIR;
1064                 mp.srtcm_rfc2697.cbs = METER_CIR / 8;
1065                 mp.srtcm_rfc2697.ebs = 0;
1066
1067                 ret = rte_mtr_meter_profile_add
1068                         (port_id, DEFAULT_METER_PROF_ID, &mp, &error);
1069                 if (ret != 0) {
1070                         printf("Port %u create Profile error(%d) message: %s\n",
1071                                 port_id, error.type,
1072                                 error.message ? error.message : "(no stated reason)");
1073                         rte_exit(EXIT_FAILURE, "Error: Creation meter profile Failed!\n");
1074                 }
1075         }
1076 }
1077
1078 static inline void
1079 destroy_flows(int port_id, uint8_t core_id, struct rte_flow **flows_list)
1080 {
1081         struct rte_flow_error error;
1082         clock_t start_batch, end_batch;
1083         double cpu_time_used = 0;
1084         double deletion_rate;
1085         double cpu_time_per_batch[MAX_BATCHES_COUNT] = { 0 };
1086         double delta;
1087         uint32_t i;
1088         int rules_batch_idx;
1089         int rules_count_per_core;
1090
1091         rules_count_per_core = rules_count / mc_pool.cores_count;
1092         /* If group > 0 , should add 1 flow which created in group 0 */
1093         if (flow_group > 0 && core_id == 0)
1094                 rules_count_per_core++;
1095
1096         start_batch = rte_get_timer_cycles();
1097         for (i = 0; i < (uint32_t) rules_count_per_core; i++) {
1098                 if (flows_list[i] == 0)
1099                         break;
1100
1101                 memset(&error, 0x33, sizeof(error));
1102                 if (rte_flow_destroy(port_id, flows_list[i], &error)) {
1103                         print_flow_error(error);
1104                         rte_exit(EXIT_FAILURE, "Error in deleting flow\n");
1105                 }
1106
1107                 /*
1108                  * Save the deletion rate for rules batch.
1109                  * Check if the deletion reached the rules
1110                  * patch counter, then save the deletion rate
1111                  * for this batch.
1112                  */
1113                 if (!((i + 1) % rules_batch)) {
1114                         end_batch = rte_get_timer_cycles();
1115                         delta = (double) (end_batch - start_batch);
1116                         rules_batch_idx = ((i + 1) / rules_batch) - 1;
1117                         cpu_time_per_batch[rules_batch_idx] = delta / rte_get_timer_hz();
1118                         cpu_time_used += cpu_time_per_batch[rules_batch_idx];
1119                         start_batch = rte_get_timer_cycles();
1120                 }
1121         }
1122
1123         /* Print deletion rates for all batches */
1124         if (dump_iterations)
1125                 print_rules_batches(cpu_time_per_batch);
1126
1127         /* Deletion rate for all rules */
1128         deletion_rate = ((double) (rules_count_per_core / cpu_time_used) / 1000);
1129         printf(":: Port %d :: Core %d :: Rules deletion rate -> %f K Rule/Sec\n",
1130                 port_id, core_id, deletion_rate);
1131         printf(":: Port %d :: Core %d :: The time for deleting %d rules is %f seconds\n",
1132                 port_id, core_id, rules_count_per_core, cpu_time_used);
1133
1134         mc_pool.flows_record.deletion[port_id][core_id] = cpu_time_used;
1135 }
1136
1137 static struct rte_flow **
1138 insert_flows(int port_id, uint8_t core_id)
1139 {
1140         struct rte_flow **flows_list;
1141         struct rte_flow_error error;
1142         clock_t start_batch, end_batch;
1143         double first_flow_latency;
1144         double cpu_time_used;
1145         double insertion_rate;
1146         double cpu_time_per_batch[MAX_BATCHES_COUNT] = { 0 };
1147         double delta;
1148         uint32_t flow_index;
1149         uint32_t counter, start_counter = 0, end_counter;
1150         uint64_t global_items[MAX_ITEMS_NUM] = { 0 };
1151         uint64_t global_actions[MAX_ACTIONS_NUM] = { 0 };
1152         int rules_batch_idx;
1153         int rules_count_per_core;
1154
1155         rules_count_per_core = rules_count / mc_pool.cores_count;
1156
1157         /* Set boundaries of rules for each core. */
1158         if (core_id)
1159                 start_counter = core_id * rules_count_per_core;
1160         end_counter = (core_id + 1) * rules_count_per_core;
1161
1162         global_items[0] = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ETH);
1163         global_actions[0] = FLOW_ITEM_MASK(RTE_FLOW_ACTION_TYPE_JUMP);
1164
1165         flows_list = rte_zmalloc("flows_list",
1166                 (sizeof(struct rte_flow *) * rules_count_per_core) + 1, 0);
1167         if (flows_list == NULL)
1168                 rte_exit(EXIT_FAILURE, "No Memory available!\n");
1169
1170         cpu_time_used = 0;
1171         flow_index = 0;
1172         if (flow_group > 0 && core_id == 0) {
1173                 /*
1174                  * Create global rule to jump into flow_group,
1175                  * this way the app will avoid the default rules.
1176                  *
1177                  * This rule will be created only once.
1178                  *
1179                  * Global rule:
1180                  * group 0 eth / end actions jump group <flow_group>
1181                  */
1182                 flow = generate_flow(port_id, 0, flow_attrs,
1183                         global_items, global_actions,
1184                         flow_group, 0, 0, 0, 0, core_id, unique_data, &error);
1185
1186                 if (flow == NULL) {
1187                         print_flow_error(error);
1188                         rte_exit(EXIT_FAILURE, "Error in creating flow\n");
1189                 }
1190                 flows_list[flow_index++] = flow;
1191         }
1192
1193         start_batch = rte_get_timer_cycles();
1194         for (counter = start_counter; counter < end_counter; counter++) {
1195                 flow = generate_flow(port_id, flow_group,
1196                         flow_attrs, flow_items, flow_actions,
1197                         JUMP_ACTION_TABLE, counter,
1198                         hairpin_queues_num,
1199                         encap_data, decap_data,
1200                         core_id, unique_data, &error);
1201
1202                 if (!counter) {
1203                         first_flow_latency = (double) (rte_get_timer_cycles() - start_batch);
1204                         first_flow_latency /= rte_get_timer_hz();
1205                         /* In millisecond */
1206                         first_flow_latency *= 1000;
1207                         printf(":: First Flow Latency :: Port %d :: First flow "
1208                                 "installed in %f milliseconds\n",
1209                                 port_id, first_flow_latency);
1210                 }
1211
1212                 if (force_quit)
1213                         counter = end_counter;
1214
1215                 if (!flow) {
1216                         print_flow_error(error);
1217                         rte_exit(EXIT_FAILURE, "Error in creating flow\n");
1218                 }
1219
1220                 flows_list[flow_index++] = flow;
1221
1222                 /*
1223                  * Save the insertion rate for rules batch.
1224                  * Check if the insertion reached the rules
1225                  * patch counter, then save the insertion rate
1226                  * for this batch.
1227                  */
1228                 if (!((counter + 1) % rules_batch)) {
1229                         end_batch = rte_get_timer_cycles();
1230                         delta = (double) (end_batch - start_batch);
1231                         rules_batch_idx = ((counter + 1) / rules_batch) - 1;
1232                         cpu_time_per_batch[rules_batch_idx] = delta / rte_get_timer_hz();
1233                         cpu_time_used += cpu_time_per_batch[rules_batch_idx];
1234                         start_batch = rte_get_timer_cycles();
1235                 }
1236         }
1237
1238         /* Print insertion rates for all batches */
1239         if (dump_iterations)
1240                 print_rules_batches(cpu_time_per_batch);
1241
1242         printf(":: Port %d :: Core %d boundaries :: start @[%d] - end @[%d]\n",
1243                 port_id, core_id, start_counter, end_counter - 1);
1244
1245         /* Insertion rate for all rules in one core */
1246         insertion_rate = ((double) (rules_count_per_core / cpu_time_used) / 1000);
1247         printf(":: Port %d :: Core %d :: Rules insertion rate -> %f K Rule/Sec\n",
1248                 port_id, core_id, insertion_rate);
1249         printf(":: Port %d :: Core %d :: The time for creating %d in rules %f seconds\n",
1250                 port_id, core_id, rules_count_per_core, cpu_time_used);
1251
1252         mc_pool.flows_record.insertion[port_id][core_id] = cpu_time_used;
1253         return flows_list;
1254 }
1255
1256 static void
1257 flows_handler(uint8_t core_id)
1258 {
1259         struct rte_flow **flows_list;
1260         uint16_t nr_ports;
1261         int port_id;
1262
1263         nr_ports = rte_eth_dev_count_avail();
1264
1265         if (rules_batch > rules_count)
1266                 rules_batch = rules_count;
1267
1268         printf(":: Rules Count per port: %d\n\n", rules_count);
1269
1270         for (port_id = 0; port_id < nr_ports; port_id++) {
1271                 /* If port outside portmask */
1272                 if (!((ports_mask >> port_id) & 0x1))
1273                         continue;
1274
1275                 /* Insertion part. */
1276                 mc_pool.last_alloc[core_id] = (int64_t)dump_socket_mem(stdout);
1277                 if (has_meter())
1278                         meters_handler(port_id, core_id, METER_CREATE);
1279                 flows_list = insert_flows(port_id, core_id);
1280                 if (flows_list == NULL)
1281                         rte_exit(EXIT_FAILURE, "Error: Insertion Failed!\n");
1282                 mc_pool.current_alloc[core_id] = (int64_t)dump_socket_mem(stdout);
1283
1284                 /* Deletion part. */
1285                 if (delete_flag) {
1286                         destroy_flows(port_id, core_id, flows_list);
1287                         if (has_meter())
1288                                 meters_handler(port_id, core_id, METER_DELETE);
1289                 }
1290         }
1291 }
1292
1293 static void
1294 dump_used_cpu_time(const char *item,
1295                 uint16_t port, struct used_cpu_time *used_time)
1296 {
1297         uint32_t i;
1298         /* Latency: total count of rte rules divided
1299          * over max time used by thread between all
1300          * threads time.
1301          *
1302          * Throughput: total count of rte rules divided
1303          * over the average of the time cosumed by all
1304          * threads time.
1305          */
1306         double insertion_latency_time;
1307         double insertion_throughput_time;
1308         double deletion_latency_time;
1309         double deletion_throughput_time;
1310         double insertion_latency, insertion_throughput;
1311         double deletion_latency, deletion_throughput;
1312
1313         /* Save first insertion/deletion rates from first thread.
1314          * Start comparing with all threads, if any thread used
1315          * time more than current saved, replace it.
1316          *
1317          * Thus in the end we will have the max time used for
1318          * insertion/deletion by one thread.
1319          *
1320          * As for memory consumption, save the min of all threads
1321          * of last alloc, and save the max for all threads for
1322          * current alloc.
1323          */
1324
1325         insertion_latency_time = used_time->insertion[port][0];
1326         deletion_latency_time = used_time->deletion[port][0];
1327         insertion_throughput_time = used_time->insertion[port][0];
1328         deletion_throughput_time = used_time->deletion[port][0];
1329
1330         i = mc_pool.cores_count;
1331         while (i-- > 1) {
1332                 insertion_throughput_time += used_time->insertion[port][i];
1333                 deletion_throughput_time += used_time->deletion[port][i];
1334                 if (insertion_latency_time < used_time->insertion[port][i])
1335                         insertion_latency_time = used_time->insertion[port][i];
1336                 if (deletion_latency_time < used_time->deletion[port][i])
1337                         deletion_latency_time = used_time->deletion[port][i];
1338         }
1339
1340         insertion_latency = ((double) (mc_pool.rules_count
1341                                 / insertion_latency_time) / 1000);
1342         deletion_latency = ((double) (mc_pool.rules_count
1343                                 / deletion_latency_time) / 1000);
1344
1345         insertion_throughput_time /= mc_pool.cores_count;
1346         deletion_throughput_time /= mc_pool.cores_count;
1347         insertion_throughput = ((double) (mc_pool.rules_count
1348                                 / insertion_throughput_time) / 1000);
1349         deletion_throughput = ((double) (mc_pool.rules_count
1350                                 / deletion_throughput_time) / 1000);
1351
1352         /* Latency stats */
1353         printf("\n%s\n:: [Latency | Insertion] All Cores :: Port %d :: ",
1354                 item, port);
1355         printf("Total flows insertion rate -> %f K Rules/Sec\n",
1356                 insertion_latency);
1357         printf(":: [Latency | Insertion] All Cores :: Port %d :: ", port);
1358         printf("The time for creating %d rules is %f seconds\n",
1359                 mc_pool.rules_count, insertion_latency_time);
1360
1361         /* Throughput stats */
1362         printf(":: [Throughput | Insertion] All Cores :: Port %d :: ", port);
1363         printf("Total flows insertion rate -> %f K Rules/Sec\n",
1364                 insertion_throughput);
1365         printf(":: [Throughput | Insertion] All Cores :: Port %d :: ", port);
1366         printf("The average time for creating %d rules is %f seconds\n",
1367                 mc_pool.rules_count, insertion_throughput_time);
1368
1369         if (delete_flag) {
1370         /* Latency stats */
1371                 printf(":: [Latency | Deletion] All Cores :: Port %d :: Total "
1372                         "deletion rate -> %f K Rules/Sec\n",
1373                         port, deletion_latency);
1374                 printf(":: [Latency | Deletion] All Cores :: Port %d :: ",
1375                         port);
1376                 printf("The time for deleting %d rules is %f seconds\n",
1377                         mc_pool.rules_count, deletion_latency_time);
1378
1379                 /* Throughput stats */
1380                 printf(":: [Throughput | Deletion] All Cores :: Port %d :: Total "
1381                         "deletion rate -> %f K Rules/Sec\n",
1382                         port, deletion_throughput);
1383                 printf(":: [Throughput | Deletion] All Cores :: Port %d :: ",
1384                         port);
1385                 printf("The average time for deleting %d rules is %f seconds\n",
1386                         mc_pool.rules_count, deletion_throughput_time);
1387         }
1388 }
1389
1390 static void
1391 dump_used_mem(uint16_t port)
1392 {
1393         uint32_t i;
1394         int64_t last_alloc, current_alloc;
1395         int flow_size_in_bytes;
1396
1397         last_alloc = mc_pool.last_alloc[0];
1398         current_alloc = mc_pool.current_alloc[0];
1399
1400         i = mc_pool.cores_count;
1401         while (i-- > 1) {
1402                 if (last_alloc > mc_pool.last_alloc[i])
1403                         last_alloc = mc_pool.last_alloc[i];
1404                 if (current_alloc < mc_pool.current_alloc[i])
1405                         current_alloc = mc_pool.current_alloc[i];
1406         }
1407
1408         flow_size_in_bytes = (current_alloc - last_alloc) / mc_pool.rules_count;
1409         printf("\n:: Port %d :: rte_flow size in DPDK layer: %d Bytes\n",
1410                 port, flow_size_in_bytes);
1411 }
1412
1413 static int
1414 run_rte_flow_handler_cores(void *data __rte_unused)
1415 {
1416         uint16_t port;
1417         int lcore_counter = 0;
1418         int lcore_id = rte_lcore_id();
1419         int i;
1420
1421         RTE_LCORE_FOREACH(i) {
1422                 /*  If core not needed return. */
1423                 if (lcore_id == i) {
1424                         printf(":: lcore %d mapped with index %d\n", lcore_id, lcore_counter);
1425                         if (lcore_counter >= (int) mc_pool.cores_count)
1426                                 return 0;
1427                         break;
1428                 }
1429                 lcore_counter++;
1430         }
1431         lcore_id = lcore_counter;
1432
1433         if (lcore_id >= (int) mc_pool.cores_count)
1434                 return 0;
1435
1436         mc_pool.rules_count = rules_count;
1437
1438         flows_handler(lcore_id);
1439
1440         /* Only main core to print total results. */
1441         if (lcore_id != 0)
1442                 return 0;
1443
1444         /* Make sure all cores finished insertion/deletion process. */
1445         rte_eal_mp_wait_lcore();
1446
1447         RTE_ETH_FOREACH_DEV(port) {
1448                 /* If port outside portmask */
1449                 if (!((ports_mask >> port) & 0x1))
1450                         continue;
1451                 if (has_meter())
1452                         dump_used_cpu_time("Meters:",
1453                                 port, &mc_pool.meters_record);
1454                 dump_used_cpu_time("Flows:",
1455                         port, &mc_pool.flows_record);
1456                 dump_used_mem(port);
1457         }
1458
1459         return 0;
1460 }
1461
1462 static void
1463 signal_handler(int signum)
1464 {
1465         if (signum == SIGINT || signum == SIGTERM) {
1466                 printf("\n\nSignal %d received, preparing to exit...\n",
1467                                         signum);
1468                 printf("Error: Stats are wrong due to sudden signal!\n\n");
1469                 force_quit = true;
1470         }
1471 }
1472
1473 static inline uint16_t
1474 do_rx(struct lcore_info *li, uint16_t rx_port, uint16_t rx_queue)
1475 {
1476         uint16_t cnt = 0;
1477         cnt = rte_eth_rx_burst(rx_port, rx_queue, li->pkts, MAX_PKT_BURST);
1478         li->rx_pkts += cnt;
1479         return cnt;
1480 }
1481
1482 static inline void
1483 do_tx(struct lcore_info *li, uint16_t cnt, uint16_t tx_port,
1484                         uint16_t tx_queue)
1485 {
1486         uint16_t nr_tx = 0;
1487         uint16_t i;
1488
1489         nr_tx = rte_eth_tx_burst(tx_port, tx_queue, li->pkts, cnt);
1490         li->tx_pkts  += nr_tx;
1491         li->tx_drops += cnt - nr_tx;
1492
1493         for (i = nr_tx; i < cnt; i++)
1494                 rte_pktmbuf_free(li->pkts[i]);
1495 }
1496
1497 /*
1498  * Method to convert numbers into pretty numbers that easy
1499  * to read. The design here is to add comma after each three
1500  * digits and set all of this inside buffer.
1501  *
1502  * For example if n = 1799321, the output will be
1503  * 1,799,321 after this method which is easier to read.
1504  */
1505 static char *
1506 pretty_number(uint64_t n, char *buf)
1507 {
1508         char p[6][4];
1509         int i = 0;
1510         int off = 0;
1511
1512         while (n > 1000) {
1513                 sprintf(p[i], "%03d", (int)(n % 1000));
1514                 n /= 1000;
1515                 i += 1;
1516         }
1517
1518         sprintf(p[i++], "%d", (int)n);
1519
1520         while (i--)
1521                 off += sprintf(buf + off, "%s,", p[i]);
1522         buf[strlen(buf) - 1] = '\0';
1523
1524         return buf;
1525 }
1526
1527 static void
1528 packet_per_second_stats(void)
1529 {
1530         struct lcore_info *old;
1531         struct lcore_info *li, *oli;
1532         int nr_lines = 0;
1533         int i;
1534
1535         old = rte_zmalloc("old",
1536                 sizeof(struct lcore_info) * RTE_MAX_LCORE, 0);
1537         if (old == NULL)
1538                 rte_exit(EXIT_FAILURE, "No Memory available!\n");
1539
1540         memcpy(old, lcore_infos,
1541                 sizeof(struct lcore_info) * RTE_MAX_LCORE);
1542
1543         while (!force_quit) {
1544                 uint64_t total_tx_pkts = 0;
1545                 uint64_t total_rx_pkts = 0;
1546                 uint64_t total_tx_drops = 0;
1547                 uint64_t tx_delta, rx_delta, drops_delta;
1548                 char buf[3][32];
1549                 int nr_valid_core = 0;
1550
1551                 sleep(1);
1552
1553                 if (nr_lines) {
1554                         char go_up_nr_lines[16];
1555
1556                         sprintf(go_up_nr_lines, "%c[%dA\r", 27, nr_lines);
1557                         printf("%s\r", go_up_nr_lines);
1558                 }
1559
1560                 printf("\n%6s %16s %16s %16s\n", "core", "tx", "tx drops", "rx");
1561                 printf("%6s %16s %16s %16s\n", "------", "----------------",
1562                         "----------------", "----------------");
1563                 nr_lines = 3;
1564                 for (i = 0; i < RTE_MAX_LCORE; i++) {
1565                         li  = &lcore_infos[i];
1566                         oli = &old[i];
1567                         if (li->mode != LCORE_MODE_PKT)
1568                                 continue;
1569
1570                         tx_delta    = li->tx_pkts  - oli->tx_pkts;
1571                         rx_delta    = li->rx_pkts  - oli->rx_pkts;
1572                         drops_delta = li->tx_drops - oli->tx_drops;
1573                         printf("%6d %16s %16s %16s\n", i,
1574                                 pretty_number(tx_delta,    buf[0]),
1575                                 pretty_number(drops_delta, buf[1]),
1576                                 pretty_number(rx_delta,    buf[2]));
1577
1578                         total_tx_pkts  += tx_delta;
1579                         total_rx_pkts  += rx_delta;
1580                         total_tx_drops += drops_delta;
1581
1582                         nr_valid_core++;
1583                         nr_lines += 1;
1584                 }
1585
1586                 if (nr_valid_core > 1) {
1587                         printf("%6s %16s %16s %16s\n", "total",
1588                                 pretty_number(total_tx_pkts,  buf[0]),
1589                                 pretty_number(total_tx_drops, buf[1]),
1590                                 pretty_number(total_rx_pkts,  buf[2]));
1591                         nr_lines += 1;
1592                 }
1593
1594                 memcpy(old, lcore_infos,
1595                         sizeof(struct lcore_info) * RTE_MAX_LCORE);
1596         }
1597 }
1598
1599 static int
1600 start_forwarding(void *data __rte_unused)
1601 {
1602         int lcore = rte_lcore_id();
1603         int stream_id;
1604         uint16_t cnt;
1605         struct lcore_info *li = &lcore_infos[lcore];
1606
1607         if (!li->mode)
1608                 return 0;
1609
1610         if (li->mode == LCORE_MODE_STATS) {
1611                 printf(":: started stats on lcore %u\n", lcore);
1612                 packet_per_second_stats();
1613                 return 0;
1614         }
1615
1616         while (!force_quit)
1617                 for (stream_id = 0; stream_id < MAX_STREAMS; stream_id++) {
1618                         if (li->streams[stream_id].rx_port == -1)
1619                                 continue;
1620
1621                         cnt = do_rx(li,
1622                                         li->streams[stream_id].rx_port,
1623                                         li->streams[stream_id].rx_queue);
1624                         if (cnt)
1625                                 do_tx(li, cnt,
1626                                         li->streams[stream_id].tx_port,
1627                                         li->streams[stream_id].tx_queue);
1628                 }
1629         return 0;
1630 }
1631
1632 static void
1633 init_lcore_info(void)
1634 {
1635         int i, j;
1636         unsigned int lcore;
1637         uint16_t nr_port;
1638         uint16_t queue;
1639         int port;
1640         int stream_id = 0;
1641         int streams_per_core;
1642         int unassigned_streams;
1643         int nb_fwd_streams;
1644         nr_port = rte_eth_dev_count_avail();
1645
1646         /* First logical core is reserved for stats printing */
1647         lcore = rte_get_next_lcore(-1, 0, 0);
1648         lcore_infos[lcore].mode = LCORE_MODE_STATS;
1649
1650         /*
1651          * Initialize all cores
1652          * All cores at first must have -1 value in all streams
1653          * This means that this stream is not used, or not set
1654          * yet.
1655          */
1656         for (i = 0; i < RTE_MAX_LCORE; i++)
1657                 for (j = 0; j < MAX_STREAMS; j++) {
1658                         lcore_infos[i].streams[j].tx_port = -1;
1659                         lcore_infos[i].streams[j].rx_port = -1;
1660                         lcore_infos[i].streams[j].tx_queue = -1;
1661                         lcore_infos[i].streams[j].rx_queue = -1;
1662                         lcore_infos[i].streams_nb = 0;
1663                 }
1664
1665         /*
1666          * Calculate the total streams count.
1667          * Also distribute those streams count between the available
1668          * logical cores except first core, since it's reserved for
1669          * stats prints.
1670          */
1671         nb_fwd_streams = nr_port * RXQ_NUM;
1672         if ((int)(nb_lcores - 1) >= nb_fwd_streams)
1673                 for (i = 0; i < (int)(nb_lcores - 1); i++) {
1674                         lcore = rte_get_next_lcore(lcore, 0, 0);
1675                         lcore_infos[lcore].streams_nb = 1;
1676                 }
1677         else {
1678                 streams_per_core = nb_fwd_streams / (nb_lcores - 1);
1679                 unassigned_streams = nb_fwd_streams % (nb_lcores - 1);
1680                 for (i = 0; i < (int)(nb_lcores - 1); i++) {
1681                         lcore = rte_get_next_lcore(lcore, 0, 0);
1682                         lcore_infos[lcore].streams_nb = streams_per_core;
1683                         if (unassigned_streams) {
1684                                 lcore_infos[lcore].streams_nb++;
1685                                 unassigned_streams--;
1686                         }
1687                 }
1688         }
1689
1690         /*
1691          * Set the streams for the cores according to each logical
1692          * core stream count.
1693          * The streams is built on the design of what received should
1694          * forward as well, this means that if you received packets on
1695          * port 0 queue 0 then the same queue should forward the
1696          * packets, using the same logical core.
1697          */
1698         lcore = rte_get_next_lcore(-1, 0, 0);
1699         for (port = 0; port < nr_port; port++) {
1700                 /* Create FWD stream */
1701                 for (queue = 0; queue < RXQ_NUM; queue++) {
1702                         if (!lcore_infos[lcore].streams_nb ||
1703                                 !(stream_id % lcore_infos[lcore].streams_nb)) {
1704                                 lcore = rte_get_next_lcore(lcore, 0, 0);
1705                                 lcore_infos[lcore].mode = LCORE_MODE_PKT;
1706                                 stream_id = 0;
1707                         }
1708                         lcore_infos[lcore].streams[stream_id].rx_queue = queue;
1709                         lcore_infos[lcore].streams[stream_id].tx_queue = queue;
1710                         lcore_infos[lcore].streams[stream_id].rx_port = port;
1711                         lcore_infos[lcore].streams[stream_id].tx_port = port;
1712                         stream_id++;
1713                 }
1714         }
1715
1716         /* Print all streams */
1717         printf(":: Stream -> core id[N]: (rx_port, rx_queue)->(tx_port, tx_queue)\n");
1718         for (i = 0; i < RTE_MAX_LCORE; i++)
1719                 for (j = 0; j < MAX_STREAMS; j++) {
1720                         /* No streams for this core */
1721                         if (lcore_infos[i].streams[j].tx_port == -1)
1722                                 break;
1723                         printf("Stream -> core id[%d]: (%d,%d)->(%d,%d)\n",
1724                                 i,
1725                                 lcore_infos[i].streams[j].rx_port,
1726                                 lcore_infos[i].streams[j].rx_queue,
1727                                 lcore_infos[i].streams[j].tx_port,
1728                                 lcore_infos[i].streams[j].tx_queue);
1729                 }
1730 }
1731
1732 static void
1733 init_port(void)
1734 {
1735         int ret;
1736         uint16_t std_queue;
1737         uint16_t hairpin_queue;
1738         uint16_t port_id;
1739         uint16_t nr_ports;
1740         uint16_t nr_queues;
1741         struct rte_eth_hairpin_conf hairpin_conf = {
1742                 .peer_count = 1,
1743         };
1744         struct rte_eth_conf port_conf = {
1745                 .rx_adv_conf = {
1746                         .rss_conf.rss_hf =
1747                                 GET_RSS_HF(),
1748                 }
1749         };
1750         struct rte_eth_txconf txq_conf;
1751         struct rte_eth_rxconf rxq_conf;
1752         struct rte_eth_dev_info dev_info;
1753
1754         nr_queues = RXQ_NUM;
1755         if (hairpin_queues_num != 0)
1756                 nr_queues = RXQ_NUM + hairpin_queues_num;
1757
1758         nr_ports = rte_eth_dev_count_avail();
1759         if (nr_ports == 0)
1760                 rte_exit(EXIT_FAILURE, "Error: no port detected\n");
1761
1762         mbuf_mp = rte_pktmbuf_pool_create("mbuf_pool",
1763                                         TOTAL_MBUF_NUM, MBUF_CACHE_SIZE,
1764                                         0, MBUF_SIZE,
1765                                         rte_socket_id());
1766         if (mbuf_mp == NULL)
1767                 rte_exit(EXIT_FAILURE, "Error: can't init mbuf pool\n");
1768
1769         for (port_id = 0; port_id < nr_ports; port_id++) {
1770                 ret = rte_eth_dev_info_get(port_id, &dev_info);
1771                 if (ret != 0)
1772                         rte_exit(EXIT_FAILURE,
1773                                 "Error during getting device"
1774                                 " (port %u) info: %s\n",
1775                                 port_id, strerror(-ret));
1776
1777                 port_conf.txmode.offloads &= dev_info.tx_offload_capa;
1778                 port_conf.rxmode.offloads &= dev_info.rx_offload_capa;
1779
1780                 printf(":: initializing port: %d\n", port_id);
1781
1782                 ret = rte_eth_dev_configure(port_id, nr_queues,
1783                                 nr_queues, &port_conf);
1784                 if (ret < 0)
1785                         rte_exit(EXIT_FAILURE,
1786                                 ":: cannot configure device: err=%d, port=%u\n",
1787                                 ret, port_id);
1788
1789                 rxq_conf = dev_info.default_rxconf;
1790                 for (std_queue = 0; std_queue < RXQ_NUM; std_queue++) {
1791                         ret = rte_eth_rx_queue_setup(port_id, std_queue, NR_RXD,
1792                                         rte_eth_dev_socket_id(port_id),
1793                                         &rxq_conf,
1794                                         mbuf_mp);
1795                         if (ret < 0)
1796                                 rte_exit(EXIT_FAILURE,
1797                                         ":: Rx queue setup failed: err=%d, port=%u\n",
1798                                         ret, port_id);
1799                 }
1800
1801                 txq_conf = dev_info.default_txconf;
1802                 for (std_queue = 0; std_queue < TXQ_NUM; std_queue++) {
1803                         ret = rte_eth_tx_queue_setup(port_id, std_queue, NR_TXD,
1804                                         rte_eth_dev_socket_id(port_id),
1805                                         &txq_conf);
1806                         if (ret < 0)
1807                                 rte_exit(EXIT_FAILURE,
1808                                         ":: Tx queue setup failed: err=%d, port=%u\n",
1809                                         ret, port_id);
1810                 }
1811
1812                 /* Catch all packets from traffic generator. */
1813                 ret = rte_eth_promiscuous_enable(port_id);
1814                 if (ret != 0)
1815                         rte_exit(EXIT_FAILURE,
1816                                 ":: promiscuous mode enable failed: err=%s, port=%u\n",
1817                                 rte_strerror(-ret), port_id);
1818
1819                 if (hairpin_queues_num != 0) {
1820                         /*
1821                          * Configure peer which represents hairpin Tx.
1822                          * Hairpin queue numbers start after standard queues
1823                          * (RXQ_NUM and TXQ_NUM).
1824                          */
1825                         for (hairpin_queue = RXQ_NUM, std_queue = 0;
1826                                         hairpin_queue < nr_queues;
1827                                         hairpin_queue++, std_queue++) {
1828                                 hairpin_conf.peers[0].port = port_id;
1829                                 hairpin_conf.peers[0].queue =
1830                                         std_queue + TXQ_NUM;
1831                                 ret = rte_eth_rx_hairpin_queue_setup(
1832                                                 port_id, hairpin_queue,
1833                                                 NR_RXD, &hairpin_conf);
1834                                 if (ret != 0)
1835                                         rte_exit(EXIT_FAILURE,
1836                                                 ":: Hairpin rx queue setup failed: err=%d, port=%u\n",
1837                                                 ret, port_id);
1838                         }
1839
1840                         for (hairpin_queue = TXQ_NUM, std_queue = 0;
1841                                         hairpin_queue < nr_queues;
1842                                         hairpin_queue++, std_queue++) {
1843                                 hairpin_conf.peers[0].port = port_id;
1844                                 hairpin_conf.peers[0].queue =
1845                                         std_queue + RXQ_NUM;
1846                                 ret = rte_eth_tx_hairpin_queue_setup(
1847                                                 port_id, hairpin_queue,
1848                                                 NR_TXD, &hairpin_conf);
1849                                 if (ret != 0)
1850                                         rte_exit(EXIT_FAILURE,
1851                                                 ":: Hairpin tx queue setup failed: err=%d, port=%u\n",
1852                                                 ret, port_id);
1853                         }
1854                 }
1855
1856                 ret = rte_eth_dev_start(port_id);
1857                 if (ret < 0)
1858                         rte_exit(EXIT_FAILURE,
1859                                 "rte_eth_dev_start:err=%d, port=%u\n",
1860                                 ret, port_id);
1861
1862                 printf(":: initializing port: %d done\n", port_id);
1863         }
1864 }
1865
1866 int
1867 main(int argc, char **argv)
1868 {
1869         int ret;
1870         uint16_t port;
1871         struct rte_flow_error error;
1872
1873         ret = rte_eal_init(argc, argv);
1874         if (ret < 0)
1875                 rte_exit(EXIT_FAILURE, "EAL init failed\n");
1876
1877         force_quit = false;
1878         dump_iterations = false;
1879         rules_count = DEFAULT_RULES_COUNT;
1880         rules_batch = DEFAULT_RULES_BATCH;
1881         delete_flag = false;
1882         dump_socket_mem_flag = false;
1883         flow_group = DEFAULT_GROUP;
1884         unique_data = false;
1885
1886         signal(SIGINT, signal_handler);
1887         signal(SIGTERM, signal_handler);
1888
1889         argc -= ret;
1890         argv += ret;
1891         if (argc > 1)
1892                 args_parse(argc, argv);
1893
1894         init_port();
1895
1896         nb_lcores = rte_lcore_count();
1897         if (nb_lcores <= 1)
1898                 rte_exit(EXIT_FAILURE, "This app needs at least two cores\n");
1899
1900         printf(":: Flows Count per port: %d\n\n", rules_count);
1901
1902         if (has_meter())
1903                 create_meter_profile();
1904         rte_eal_mp_remote_launch(run_rte_flow_handler_cores, NULL, CALL_MAIN);
1905
1906         if (enable_fwd) {
1907                 init_lcore_info();
1908                 rte_eal_mp_remote_launch(start_forwarding, NULL, CALL_MAIN);
1909         }
1910         if (has_meter() && delete_flag)
1911                 destroy_meter_profile();
1912
1913         RTE_ETH_FOREACH_DEV(port) {
1914                 rte_flow_flush(port, &error);
1915                 if (rte_eth_dev_stop(port) != 0)
1916                         printf("Failed to stop device on port %u\n", port);
1917                 rte_eth_dev_close(port);
1918         }
1919         printf("\nBye ...\n");
1920         return 0;
1921 }