app/test-flow-perf/main.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2020 Mellanox Technologies, Ltd
   3  *
   4  * This file contain the application main file
   5  * This application provides the user the ability to test the
   6  * insertion rate for specific rte_flow rule under stress state ~4M rule/
   7  *
   8  * Then it will also provide packet per second measurement after installing
   9  * all rules, the user may send traffic to test the PPS that match the rules
  10  * after all rules are installed, to check performance or functionality after
  11  * the stress.
  12  *
  13  * The flows insertion will go for all ports first, then it will print the
  14  * results, after that the application will go into forwarding packets mode
  15  * it will start receiving traffic if any and then forwarding it back and
  16  * gives packet per second measurement.
  17  */
  18
  19 #include <stdio.h>
  20 #include <stdlib.h>
  21 #include <string.h>
  22 #include <stdint.h>
  23 #include <inttypes.h>
  24 #include <stdarg.h>
  25 #include <errno.h>
  26 #include <getopt.h>
  27 #include <stdbool.h>
  28 #include <sys/time.h>
  29 #include <signal.h>
  30 #include <unistd.h>
  31
  32 #include <rte_malloc.h>
  33 #include <rte_mempool.h>
  34 #include <rte_mbuf.h>
  35 #include <rte_ethdev.h>
  36 #include <rte_flow.h>
  37
  38 #include "config.h"
  39 #include "flow_gen.h"
  40
  41 #define MAX_ITERATIONS             100
  42 #define DEFAULT_RULES_COUNT    4000000
  43 #define DEFAULT_RULES_BATCH     100000
  44 #define DEFAULT_GROUP                0
  45
  46 struct rte_flow *flow;
  47 static uint8_t flow_group;
  48
  49 static uint64_t encap_data;
  50 static uint64_t decap_data;
  51
  52 static uint64_t flow_items[MAX_ITEMS_NUM];
  53 static uint64_t flow_actions[MAX_ACTIONS_NUM];
  54 static uint64_t flow_attrs[MAX_ATTRS_NUM];
  55 static uint8_t items_idx, actions_idx, attrs_idx;
  56
  57 static uint64_t ports_mask;
  58 static volatile bool force_quit;
  59 static bool dump_iterations;
  60 static bool delete_flag;
  61 static bool dump_socket_mem_flag;
  62 static bool enable_fwd;
  63
  64 static struct rte_mempool *mbuf_mp;
  65 static uint32_t nb_lcores;
  66 static uint32_t rules_count;
  67 static uint32_t rules_batch;
  68 static uint32_t hairpin_queues_num; /* total hairpin q number - default: 0 */
  69 static uint32_t nb_lcores;
  70
  71 #define MAX_PKT_BURST    32
  72 #define LCORE_MODE_PKT    1
  73 #define LCORE_MODE_STATS  2
  74 #define MAX_STREAMS      64
  75 #define MAX_LCORES       64
  76
  77 struct stream {
  78         int tx_port;
  79         int tx_queue;
  80         int rx_port;
  81         int rx_queue;
  82 };
  83
  84 struct lcore_info {
  85         int mode;
  86         int streams_nb;
  87         struct stream streams[MAX_STREAMS];
  88         /* stats */
  89         uint64_t tx_pkts;
  90         uint64_t tx_drops;
  91         uint64_t rx_pkts;
  92         struct rte_mbuf *pkts[MAX_PKT_BURST];
  93 } __rte_cache_aligned;
  94
  95 static struct lcore_info lcore_infos[MAX_LCORES];
  96
  97 static void
  98 usage(char *progname)
  99 {
 100         printf("\nusage: %s\n", progname);
 101         printf("\nControl configurations:\n");
 102         printf("  --rules-count=N: to set the number of needed"
 103                 " rules to insert, default is %d\n", DEFAULT_RULES_COUNT);
 104         printf("  --rules-batch=N: set number of batched rules,"
 105                 " default is %d\n", DEFAULT_RULES_BATCH);
 106         printf("  --dump-iterations: To print rates for each"
 107                 " iteration\n");
 108         printf("  --deletion-rate: Enable deletion rate"
 109                 " calculations\n");
 110         printf("  --dump-socket-mem: To dump all socket memory\n");
 111         printf("  --enable-fwd: To enable packets forwarding"
 112                 " after insertion\n");
 113         printf("  --portmask=N: hexadecimal bitmask of ports used\n");
 114
 115         printf("To set flow attributes:\n");
 116         printf("  --ingress: set ingress attribute in flows\n");
 117         printf("  --egress: set egress attribute in flows\n");
 118         printf("  --transfer: set transfer attribute in flows\n");
 119         printf("  --group=N: set group for all flows,"
 120                 " default is %d\n", DEFAULT_GROUP);
 121
 122         printf("To set flow items:\n");
 123         printf("  --ether: add ether layer in flow items\n");
 124         printf("  --vlan: add vlan layer in flow items\n");
 125         printf("  --ipv4: add ipv4 layer in flow items\n");
 126         printf("  --ipv6: add ipv6 layer in flow items\n");
 127         printf("  --tcp: add tcp layer in flow items\n");
 128         printf("  --udp: add udp layer in flow items\n");
 129         printf("  --vxlan: add vxlan layer in flow items\n");
 130         printf("  --vxlan-gpe: add vxlan-gpe layer in flow items\n");
 131         printf("  --gre: add gre layer in flow items\n");
 132         printf("  --geneve: add geneve layer in flow items\n");
 133         printf("  --gtp: add gtp layer in flow items\n");
 134         printf("  --meta: add meta layer in flow items\n");
 135         printf("  --tag: add tag layer in flow items\n");
 136         printf("  --icmpv4: add icmpv4 layer in flow items\n");
 137         printf("  --icmpv6: add icmpv6 layer in flow items\n");
 138
 139         printf("To set flow actions:\n");
 140         printf("  --port-id: add port-id action in flow actions\n");
 141         printf("  --rss: add rss action in flow actions\n");
 142         printf("  --queue: add queue action in flow actions\n");
 143         printf("  --jump: add jump action in flow actions\n");
 144         printf("  --mark: add mark action in flow actions\n");
 145         printf("  --count: add count action in flow actions\n");
 146         printf("  --set-meta: add set meta action in flow actions\n");
 147         printf("  --set-tag: add set tag action in flow actions\n");
 148         printf("  --drop: add drop action in flow actions\n");
 149         printf("  --hairpin-queue=N: add hairpin-queue action in flow actions\n");
 150         printf("  --hairpin-rss=N: add hairpin-rss action in flow actions\n");
 151         printf("  --set-src-mac: add set src mac action to flow actions\n"
 152                 "Src mac to be set is random each flow\n");
 153         printf("  --set-dst-mac: add set dst mac action to flow actions\n"
 154                  "Dst mac to be set is random each flow\n");
 155         printf("  --set-src-ipv4: add set src ipv4 action to flow actions\n"
 156                 "Src ipv4 to be set is random each flow\n");
 157         printf("  --set-dst-ipv4 add set dst ipv4 action to flow actions\n"
 158                 "Dst ipv4 to be set is random each flow\n");
 159         printf("  --set-src-ipv6: add set src ipv6 action to flow actions\n"
 160                 "Src ipv6 to be set is random each flow\n");
 161         printf("  --set-dst-ipv6: add set dst ipv6 action to flow actions\n"
 162                 "Dst ipv6 to be set is random each flow\n");
 163         printf("  --set-src-tp: add set src tp action to flow actions\n"
 164                 "Src tp to be set is random each flow\n");
 165         printf("  --set-dst-tp: add set dst tp action to flow actions\n"
 166                 "Dst tp to be set is random each flow\n");
 167         printf("  --inc-tcp-ack: add inc tcp ack action to flow actions\n"
 168                 "tcp ack will be increments by 1\n");
 169         printf("  --dec-tcp-ack: add dec tcp ack action to flow actions\n"
 170                 "tcp ack will be decrements by 1\n");
 171         printf("  --inc-tcp-seq: add inc tcp seq action to flow actions\n"
 172                 "tcp seq will be increments by 1\n");
 173         printf("  --dec-tcp-seq: add dec tcp seq action to flow actions\n"
 174                 "tcp seq will be decrements by 1\n");
 175         printf("  --set-ttl: add set ttl action to flow actions\n"
 176                 "L3 ttl to be set is random each flow\n");
 177         printf("  --dec-ttl: add dec ttl action to flow actions\n"
 178                 "L3 ttl will be decrements by 1\n");
 179         printf("  --set-ipv4-dscp: add set ipv4 dscp action to flow actions\n"
 180                 "ipv4 dscp value to be set is random each flow\n");
 181         printf("  --set-ipv6-dscp: add set ipv6 dscp action to flow actions\n"
 182                 "ipv6 dscp value to be set is random each flow\n");
 183         printf("  --flag: add flag action to flow actions\n");
 184         printf("  --raw-encap=<data>: add raw encap action to flow actions\n"
 185                 "Data is the data needed to be encaped\n"
 186                 "Example: raw-encap=ether,ipv4,udp,vxlan\n");
 187         printf("  --raw-decap=<data>: add raw decap action to flow actions\n"
 188                 "Data is the data needed to be decaped\n"
 189                 "Example: raw-decap=ether,ipv4,udp,vxlan\n");
 190         printf("  --vxlan-encap: add vxlan-encap action to flow actions\n"
 191                 "Encapped data is fixed with pattern: ether,ipv4,udp,vxlan\n"
 192                 "With fixed values\n");
 193         printf("  --vxlan-decap: add vxlan_decap action to flow actions\n");
 194 }
 195
 196 static void
 197 args_parse(int argc, char **argv)
 198 {
 199         uint64_t pm;
 200         char **argvopt;
 201         char *token;
 202         char *end;
 203         int n, opt;
 204         int opt_idx;
 205         size_t i;
 206
 207         static const struct option_dict {
 208                 const char *str;
 209                 const uint64_t mask;
 210                 uint64_t *map;
 211                 uint8_t *map_idx;
 212
 213         } flow_options[] = {
 214                 {
 215                         .str = "ether",
 216                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ETH),
 217                         .map = &flow_items[0],
 218                         .map_idx = &items_idx
 219                 },
 220                 {
 221                         .str = "ipv4",
 222                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_IPV4),
 223                         .map = &flow_items[0],
 224                         .map_idx = &items_idx
 225                 },
 226                 {
 227                         .str = "ipv6",
 228                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_IPV6),
 229                         .map = &flow_items[0],
 230                         .map_idx = &items_idx
 231                 },
 232                 {
 233                         .str = "vlan",
 234                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VLAN),
 235                         .map = &flow_items[0],
 236                         .map_idx = &items_idx
 237                 },
 238                 {
 239                         .str = "tcp",
 240                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_TCP),
 241                         .map = &flow_items[0],
 242                         .map_idx = &items_idx
 243                 },
 244                 {
 245                         .str = "udp",
 246                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_UDP),
 247                         .map = &flow_items[0],
 248                         .map_idx = &items_idx
 249                 },
 250                 {
 251                         .str = "vxlan",
 252                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VXLAN),
 253                         .map = &flow_items[0],
 254                         .map_idx = &items_idx
 255                 },
 256                 {
 257                         .str = "vxlan-gpe",
 258                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_VXLAN_GPE),
 259                         .map = &flow_items[0],
 260                         .map_idx = &items_idx
 261                 },
 262                 {
 263                         .str = "gre",
 264                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GRE),
 265                         .map = &flow_items[0],
 266                         .map_idx = &items_idx
 267                 },
 268                 {
 269                         .str = "geneve",
 270                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GENEVE),
 271                         .map = &flow_items[0],
 272                         .map_idx = &items_idx
 273                 },
 274                 {
 275                         .str = "gtp",
 276                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_GTP),
 277                         .map = &flow_items[0],
 278                         .map_idx = &items_idx
 279                 },
 280                 {
 281                         .str = "meta",
 282                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_META),
 283                         .map = &flow_items[0],
 284                         .map_idx = &items_idx
 285                 },
 286                 {
 287                         .str = "tag",
 288                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_TAG),
 289                         .map = &flow_items[0],
 290                         .map_idx = &items_idx
 291                 },
 292                 {
 293                         .str = "icmpv4",
 294                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ICMP),
 295                         .map = &flow_items[0],
 296                         .map_idx = &items_idx
 297                 },
 298                 {
 299                         .str = "icmpv6",
 300                         .mask = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ICMP6),
 301                         .map = &flow_items[0],
 302                         .map_idx = &items_idx
 303                 },
 304                 {
 305                         .str = "ingress",
 306                         .mask = INGRESS,
 307                         .map = &flow_attrs[0],
 308                         .map_idx = &attrs_idx
 309                 },
 310                 {
 311                         .str = "egress",
 312                         .mask = EGRESS,
 313                         .map = &flow_attrs[0],
 314                         .map_idx = &attrs_idx
 315                 },
 316                 {
 317                         .str = "transfer",
 318                         .mask = TRANSFER,
 319                         .map = &flow_attrs[0],
 320                         .map_idx = &attrs_idx
 321                 },
 322                 {
 323                         .str = "port-id",
 324                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_PORT_ID),
 325                         .map = &flow_actions[0],
 326                         .map_idx = &actions_idx
 327                 },
 328                 {
 329                         .str = "rss",
 330                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_RSS),
 331                         .map = &flow_actions[0],
 332                         .map_idx = &actions_idx
 333                 },
 334                 {
 335                         .str = "queue",
 336                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_QUEUE),
 337                         .map = &flow_actions[0],
 338                         .map_idx = &actions_idx
 339                 },
 340                 {
 341                         .str = "jump",
 342                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_JUMP),
 343                         .map = &flow_actions[0],
 344                         .map_idx = &actions_idx
 345                 },
 346                 {
 347                         .str = "mark",
 348                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_MARK),
 349                         .map = &flow_actions[0],
 350                         .map_idx = &actions_idx
 351                 },
 352                 {
 353                         .str = "count",
 354                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_COUNT),
 355                         .map = &flow_actions[0],
 356                         .map_idx = &actions_idx
 357                 },
 358                 {
 359                         .str = "set-meta",
 360                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_SET_META),
 361                         .map = &flow_actions[0],
 362                         .map_idx = &actions_idx
 363                 },
 364                 {
 365                         .str = "set-tag",
 366                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_SET_TAG),
 367                         .map = &flow_actions[0],
 368                         .map_idx = &actions_idx
 369                 },
 370                 {
 371                         .str = "drop",
 372                         .mask = FLOW_ACTION_MASK(RTE_FLOW_ACTION_TYPE_DROP),
 373                         .map = &flow_actions[0],
 374                         .map_idx = &actions_idx
 375                 },
 376                 {
 377                         .str = "set-src-mac",
 378                         .mask = FLOW_ACTION_MASK(
 379                                 RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
 380                         ),
 381                         .map = &flow_actions[0],
 382                         .map_idx = &actions_idx
 383                 },
 384                 {
 385                         .str = "set-dst-mac",
 386                         .mask = FLOW_ACTION_MASK(
 387                                 RTE_FLOW_ACTION_TYPE_SET_MAC_DST
 388                         ),
 389                         .map = &flow_actions[0],
 390                         .map_idx = &actions_idx
 391                 },
 392                 {
 393                         .str = "set-src-ipv4",
 394                         .mask = FLOW_ACTION_MASK(
 395                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
 396                         ),
 397                         .map = &flow_actions[0],
 398                         .map_idx = &actions_idx
 399                 },
 400                 {
 401                         .str = "set-dst-ipv4",
 402                         .mask = FLOW_ACTION_MASK(
 403                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
 404                         ),
 405                         .map = &flow_actions[0],
 406                         .map_idx = &actions_idx
 407                 },
 408                 {
 409                         .str = "set-src-ipv6",
 410                         .mask = FLOW_ACTION_MASK(
 411                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
 412                         ),
 413                         .map = &flow_actions[0],
 414                         .map_idx = &actions_idx
 415                 },
 416                 {
 417                         .str = "set-dst-ipv6",
 418                         .mask = FLOW_ACTION_MASK(
 419                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
 420                         ),
 421                         .map = &flow_actions[0],
 422                         .map_idx = &actions_idx
 423                 },
 424                 {
 425                         .str = "set-src-tp",
 426                         .mask = FLOW_ACTION_MASK(
 427                                 RTE_FLOW_ACTION_TYPE_SET_TP_SRC
 428                         ),
 429                         .map = &flow_actions[0],
 430                         .map_idx = &actions_idx
 431                 },
 432                 {
 433                         .str = "set-dst-tp",
 434                         .mask = FLOW_ACTION_MASK(
 435                                 RTE_FLOW_ACTION_TYPE_SET_TP_DST
 436                         ),
 437                         .map = &flow_actions[0],
 438                         .map_idx = &actions_idx
 439                 },
 440                 {
 441                         .str = "inc-tcp-ack",
 442                         .mask = FLOW_ACTION_MASK(
 443                                 RTE_FLOW_ACTION_TYPE_INC_TCP_ACK
 444                         ),
 445                         .map = &flow_actions[0],
 446                         .map_idx = &actions_idx
 447                 },
 448                 {
 449                         .str = "dec-tcp-ack",
 450                         .mask = FLOW_ACTION_MASK(
 451                                 RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK
 452                         ),
 453                         .map = &flow_actions[0],
 454                         .map_idx = &actions_idx
 455                 },
 456                 {
 457                         .str = "inc-tcp-seq",
 458                         .mask = FLOW_ACTION_MASK(
 459                                 RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ
 460                         ),
 461                         .map = &flow_actions[0],
 462                         .map_idx = &actions_idx
 463                 },
 464                 {
 465                         .str = "dec-tcp-seq",
 466                         .mask = FLOW_ACTION_MASK(
 467                                 RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ
 468                         ),
 469                         .map = &flow_actions[0],
 470                         .map_idx = &actions_idx
 471                 },
 472                 {
 473                         .str = "set-ttl",
 474                         .mask = FLOW_ACTION_MASK(
 475                                 RTE_FLOW_ACTION_TYPE_SET_TTL
 476                         ),
 477                         .map = &flow_actions[0],
 478                         .map_idx = &actions_idx
 479                 },
 480                 {
 481                         .str = "dec-ttl",
 482                         .mask = FLOW_ACTION_MASK(
 483                                 RTE_FLOW_ACTION_TYPE_DEC_TTL
 484                         ),
 485                         .map = &flow_actions[0],
 486                         .map_idx = &actions_idx
 487                 },
 488                 {
 489                         .str = "set-ipv4-dscp",
 490                         .mask = FLOW_ACTION_MASK(
 491                                 RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
 492                         ),
 493                         .map = &flow_actions[0],
 494                         .map_idx = &actions_idx
 495                 },
 496                 {
 497                         .str = "set-ipv6-dscp",
 498                         .mask = FLOW_ACTION_MASK(
 499                                 RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
 500                         ),
 501                         .map = &flow_actions[0],
 502                         .map_idx = &actions_idx
 503                 },
 504                 {
 505                         .str = "flag",
 506                         .mask = FLOW_ACTION_MASK(
 507                                 RTE_FLOW_ACTION_TYPE_FLAG
 508                         ),
 509                         .map = &flow_actions[0],
 510                         .map_idx = &actions_idx
 511                 },
 512                 {
 513                         .str = "vxlan-encap",
 514                         .mask = FLOW_ACTION_MASK(
 515                                 RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP
 516                         ),
 517                         .map = &flow_actions[0],
 518                         .map_idx = &actions_idx
 519                 },
 520                 {
 521                         .str = "vxlan-decap",
 522                         .mask = FLOW_ACTION_MASK(
 523                                 RTE_FLOW_ACTION_TYPE_VXLAN_DECAP
 524                         ),
 525                         .map = &flow_actions[0],
 526                         .map_idx = &actions_idx
 527                 },
 528         };
 529
 530         static const struct option lgopts[] = {
 531                 /* Control */
 532                 { "help",                       0, 0, 0 },
 533                 { "rules-count",                1, 0, 0 },
 534                 { "rules-batch",                1, 0, 0 },
 535                 { "dump-iterations",            0, 0, 0 },
 536                 { "deletion-rate",              0, 0, 0 },
 537                 { "dump-socket-mem",            0, 0, 0 },
 538                 { "enable-fwd",                 0, 0, 0 },
 539                 { "portmask",                   1, 0, 0 },
 540                 /* Attributes */
 541                 { "ingress",                    0, 0, 0 },
 542                 { "egress",                     0, 0, 0 },
 543                 { "transfer",                   0, 0, 0 },
 544                 { "group",                      1, 0, 0 },
 545                 /* Items */
 546                 { "ether",                      0, 0, 0 },
 547                 { "vlan",                       0, 0, 0 },
 548                 { "ipv4",                       0, 0, 0 },
 549                 { "ipv6",                       0, 0, 0 },
 550                 { "tcp",                        0, 0, 0 },
 551                 { "udp",                        0, 0, 0 },
 552                 { "vxlan",                      0, 0, 0 },
 553                 { "vxlan-gpe",                  0, 0, 0 },
 554                 { "gre",                        0, 0, 0 },
 555                 { "geneve",                     0, 0, 0 },
 556                 { "gtp",                        0, 0, 0 },
 557                 { "meta",                       0, 0, 0 },
 558                 { "tag",                        0, 0, 0 },
 559                 { "icmpv4",                     0, 0, 0 },
 560                 { "icmpv6",                     0, 0, 0 },
 561                 /* Actions */
 562                 { "port-id",                    0, 0, 0 },
 563                 { "rss",                        0, 0, 0 },
 564                 { "queue",                      0, 0, 0 },
 565                 { "jump",                       0, 0, 0 },
 566                 { "mark",                       0, 0, 0 },
 567                 { "count",                      0, 0, 0 },
 568                 { "set-meta",                   0, 0, 0 },
 569                 { "set-tag",                    0, 0, 0 },
 570                 { "drop",                       0, 0, 0 },
 571                 { "hairpin-queue",              1, 0, 0 },
 572                 { "hairpin-rss",                1, 0, 0 },
 573                 { "set-src-mac",                0, 0, 0 },
 574                 { "set-dst-mac",                0, 0, 0 },
 575                 { "set-src-ipv4",               0, 0, 0 },
 576                 { "set-dst-ipv4",               0, 0, 0 },
 577                 { "set-src-ipv6",               0, 0, 0 },
 578                 { "set-dst-ipv6",               0, 0, 0 },
 579                 { "set-src-tp",                 0, 0, 0 },
 580                 { "set-dst-tp",                 0, 0, 0 },
 581                 { "inc-tcp-ack",                0, 0, 0 },
 582                 { "dec-tcp-ack",                0, 0, 0 },
 583                 { "inc-tcp-seq",                0, 0, 0 },
 584                 { "dec-tcp-seq",                0, 0, 0 },
 585                 { "set-ttl",                    0, 0, 0 },
 586                 { "dec-ttl",                    0, 0, 0 },
 587                 { "set-ipv4-dscp",              0, 0, 0 },
 588                 { "set-ipv6-dscp",              0, 0, 0 },
 589                 { "flag",                       0, 0, 0 },
 590                 { "raw-encap",                  1, 0, 0 },
 591                 { "raw-decap",                  1, 0, 0 },
 592                 { "vxlan-encap",                0, 0, 0 },
 593                 { "vxlan-decap",                0, 0, 0 },
 594         };
 595
 596         RTE_ETH_FOREACH_DEV(i)
 597                 ports_mask |= 1 << i;
 598
 599         hairpin_queues_num = 0;
 600         argvopt = argv;
 601
 602         printf(":: Flow -> ");
 603         while ((opt = getopt_long(argc, argvopt, "",
 604                                 lgopts, &opt_idx)) != EOF) {
 605                 switch (opt) {
 606                 case 0:
 607                         if (strcmp(lgopts[opt_idx].name, "help") == 0) {
 608                                 usage(argv[0]);
 609                                 rte_exit(EXIT_SUCCESS, "Displayed help\n");
 610                         }
 611
 612                         if (strcmp(lgopts[opt_idx].name, "group") == 0) {
 613                                 n = atoi(optarg);
 614                                 if (n >= 0)
 615                                         flow_group = n;
 616                                 else
 617                                         rte_exit(EXIT_SUCCESS,
 618                                                 "flow group should be >= 0\n");
 619                                 printf("group %d / ", flow_group);
 620                         }
 621
 622                         for (i = 0; i < RTE_DIM(flow_options); i++)
 623                                 if (strcmp(lgopts[opt_idx].name,
 624                                                 flow_options[i].str) == 0) {
 625                                         flow_options[i].map[
 626                                         (*flow_options[i].map_idx)++] =
 627                                                 flow_options[i].mask;
 628                                         printf("%s / ", flow_options[i].str);
 629                                 }
 630
 631                         if (strcmp(lgopts[opt_idx].name,
 632                                         "hairpin-rss") == 0) {
 633                                 n = atoi(optarg);
 634                                 if (n > 0)
 635                                         hairpin_queues_num = n;
 636                                 else
 637                                         rte_exit(EXIT_SUCCESS,
 638                                                 "Hairpin queues should be > 0\n");
 639
 640                                 flow_actions[actions_idx++] =
 641                                         HAIRPIN_RSS_ACTION;
 642                                 printf("hairpin-rss / ");
 643                         }
 644                         if (strcmp(lgopts[opt_idx].name,
 645                                         "hairpin-queue") == 0) {
 646                                 n = atoi(optarg);
 647                                 if (n > 0)
 648                                         hairpin_queues_num = n;
 649                                 else
 650                                         rte_exit(EXIT_SUCCESS,
 651                                                 "Hairpin queues should be > 0\n");
 652
 653                                 flow_actions[actions_idx++] =
 654                                         HAIRPIN_QUEUE_ACTION;
 655                                 printf("hairpin-queue / ");
 656                         }
 657
 658                         if (strcmp(lgopts[opt_idx].name, "raw-encap") == 0) {
 659                                 printf("raw-encap ");
 660                                 flow_actions[actions_idx++] =
 661                                         FLOW_ITEM_MASK(
 662                                                 RTE_FLOW_ACTION_TYPE_RAW_ENCAP
 663                                         );
 664
 665                                 token = strtok(optarg, ",");
 666                                 while (token != NULL) {
 667                                         for (i = 0; i < RTE_DIM(flow_options); i++) {
 668                                                 if (strcmp(flow_options[i].str, token) == 0) {
 669                                                         printf("%s,", token);
 670                                                         encap_data |= flow_options[i].mask;
 671                                                         break;
 672                                                 }
 673                                                 /* Reached last item with no match */
 674                                                 if (i == (RTE_DIM(flow_options) - 1)) {
 675                                                         fprintf(stderr, "Invalid encap item: %s\n", token);
 676                                                         usage(argv[0]);
 677                                                         rte_exit(EXIT_SUCCESS, "Invalid encap item\n");
 678                                                 }
 679                                         }
 680                                         token = strtok(NULL, ",");
 681                                 }
 682                                 printf(" / ");
 683                         }
 684                         if (strcmp(lgopts[opt_idx].name, "raw-decap") == 0) {
 685                                 printf("raw-decap ");
 686                                 flow_actions[actions_idx++] =
 687                                         FLOW_ITEM_MASK(
 688                                                 RTE_FLOW_ACTION_TYPE_RAW_DECAP
 689                                         );
 690
 691                                 token = strtok(optarg, ",");
 692                                 while (token != NULL) {
 693                                         for (i = 0; i < RTE_DIM(flow_options); i++) {
 694                                                 if (strcmp(flow_options[i].str, token) == 0) {
 695                                                         printf("%s,", token);
 696                                                         encap_data |= flow_options[i].mask;
 697                                                         break;
 698                                                 }
 699                                                 /* Reached last item with no match */
 700                                                 if (i == (RTE_DIM(flow_options) - 1)) {
 701                                                         fprintf(stderr, "Invalid decap item: %s\n", token);
 702                                                         usage(argv[0]);
 703                                                         rte_exit(EXIT_SUCCESS, "Invalid decap item\n");
 704                                                 }
 705                                         }
 706                                         token = strtok(NULL, ",");
 707                                 }
 708                                 printf(" / ");
 709                         }
 710                         /* Control */
 711                         if (strcmp(lgopts[opt_idx].name,
 712                                         "rules-batch") == 0) {
 713                                 n = atoi(optarg);
 714                                 if (n >= DEFAULT_RULES_BATCH)
 715                                         rules_batch = n;
 716                                 else {
 717                                         printf("\n\nrules_batch should be >= %d\n",
 718                                                 DEFAULT_RULES_BATCH);
 719                                         rte_exit(EXIT_SUCCESS, " ");
 720                                 }
 721                         }
 722                         if (strcmp(lgopts[opt_idx].name,
 723                                         "rules-count") == 0) {
 724                                 n = atoi(optarg);
 725                                 if (n >= (int) rules_batch)
 726                                         rules_count = n;
 727                                 else {
 728                                         printf("\n\nrules_count should be >= %d\n",
 729                                                 rules_batch);
 730                                 }
 731                         }
 732                         if (strcmp(lgopts[opt_idx].name,
 733                                         "dump-iterations") == 0)
 734                                 dump_iterations = true;
 735                         if (strcmp(lgopts[opt_idx].name,
 736                                         "deletion-rate") == 0)
 737                                 delete_flag = true;
 738                         if (strcmp(lgopts[opt_idx].name,
 739                                         "dump-socket-mem") == 0)
 740                                 dump_socket_mem_flag = true;
 741                         if (strcmp(lgopts[opt_idx].name,
 742                                         "enable-fwd") == 0)
 743                                 enable_fwd = true;
 744                         if (strcmp(lgopts[opt_idx].name,
 745                                         "portmask") == 0) {
 746                                 /* parse hexadecimal string */
 747                                 end = NULL;
 748                                 pm = strtoull(optarg, &end, 16);
 749                                 if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
 750                                         rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
 751                                 ports_mask = pm;
 752                         }
 753                         break;
 754                 default:
 755                         fprintf(stderr, "Invalid option: %s\n", argv[optind]);
 756                         usage(argv[0]);
 757                         rte_exit(EXIT_SUCCESS, "Invalid option\n");
 758                         break;
 759                 }
 760         }
 761         printf("end_flow\n");
 762 }
 763
 764 /* Dump the socket memory statistics on console */
 765 static size_t
 766 dump_socket_mem(FILE *f)
 767 {
 768         struct rte_malloc_socket_stats socket_stats;
 769         unsigned int i = 0;
 770         size_t total = 0;
 771         size_t alloc = 0;
 772         size_t free = 0;
 773         unsigned int n_alloc = 0;
 774         unsigned int n_free = 0;
 775         bool active_nodes = false;
 776
 777
 778         for (i = 0; i < RTE_MAX_NUMA_NODES; i++) {
 779                 if (rte_malloc_get_socket_stats(i, &socket_stats) ||
 780                     !socket_stats.heap_totalsz_bytes)
 781                         continue;
 782                 active_nodes = true;
 783                 total += socket_stats.heap_totalsz_bytes;
 784                 alloc += socket_stats.heap_allocsz_bytes;
 785                 free += socket_stats.heap_freesz_bytes;
 786                 n_alloc += socket_stats.alloc_count;
 787                 n_free += socket_stats.free_count;
 788                 if (dump_socket_mem_flag) {
 789                         fprintf(f, "::::::::::::::::::::::::::::::::::::::::");
 790                         fprintf(f,
 791                                 "\nSocket %u:\nsize(M) total: %.6lf\nalloc:"
 792                                 " %.6lf(%.3lf%%)\nfree: %.6lf"
 793                                 "\nmax: %.6lf"
 794                                 "\ncount alloc: %u\nfree: %u\n",
 795                                 i,
 796                                 socket_stats.heap_totalsz_bytes / 1.0e6,
 797                                 socket_stats.heap_allocsz_bytes / 1.0e6,
 798                                 (double)socket_stats.heap_allocsz_bytes * 100 /
 799                                 (double)socket_stats.heap_totalsz_bytes,
 800                                 socket_stats.heap_freesz_bytes / 1.0e6,
 801                                 socket_stats.greatest_free_size / 1.0e6,
 802                                 socket_stats.alloc_count,
 803                                 socket_stats.free_count);
 804                                 fprintf(f, "::::::::::::::::::::::::::::::::::::::::");
 805                 }
 806         }
 807         if (dump_socket_mem_flag && active_nodes) {
 808                 fprintf(f,
 809                         "\nTotal: size(M)\ntotal: %.6lf"
 810                         "\nalloc: %.6lf(%.3lf%%)\nfree: %.6lf"
 811                         "\ncount alloc: %u\nfree: %u\n",
 812                         total / 1.0e6, alloc / 1.0e6,
 813                         (double)alloc * 100 / (double)total, free / 1.0e6,
 814                         n_alloc, n_free);
 815                 fprintf(f, "::::::::::::::::::::::::::::::::::::::::\n");
 816         }
 817         return alloc;
 818 }
 819
 820 static void
 821 print_flow_error(struct rte_flow_error error)
 822 {
 823         printf("Flow can't be created %d message: %s\n",
 824                 error.type,
 825                 error.message ? error.message : "(no stated reason)");
 826 }
 827
 828 static inline void
 829 destroy_flows(int port_id, struct rte_flow **flow_list)
 830 {
 831         struct rte_flow_error error;
 832         clock_t start_iter, end_iter;
 833         double cpu_time_used = 0;
 834         double flows_rate;
 835         double cpu_time_per_iter[MAX_ITERATIONS];
 836         double delta;
 837         uint32_t i;
 838         int iter_id;
 839
 840         for (i = 0; i < MAX_ITERATIONS; i++)
 841                 cpu_time_per_iter[i] = -1;
 842
 843         if (rules_batch > rules_count)
 844                 rules_batch = rules_count;
 845
 846         /* Deletion Rate */
 847         printf("Flows Deletion on port = %d\n", port_id);
 848         start_iter = clock();
 849         for (i = 0; i < rules_count; i++) {
 850                 if (flow_list[i] == 0)
 851                         break;
 852
 853                 memset(&error, 0x33, sizeof(error));
 854                 if (rte_flow_destroy(port_id, flow_list[i], &error)) {
 855                         print_flow_error(error);
 856                         rte_exit(EXIT_FAILURE, "Error in deleting flow");
 857                 }
 858
 859                 if (i && !((i + 1) % rules_batch)) {
 860                         /* Save the deletion rate of each iter */
 861                         end_iter = clock();
 862                         delta = (double) (end_iter - start_iter);
 863                         iter_id = ((i + 1) / rules_batch) - 1;
 864                         cpu_time_per_iter[iter_id] =
 865                                 delta / CLOCKS_PER_SEC;
 866                         cpu_time_used += cpu_time_per_iter[iter_id];
 867                         start_iter = clock();
 868                 }
 869         }
 870
 871         /* Deletion rate per iteration */
 872         if (dump_iterations)
 873                 for (i = 0; i < MAX_ITERATIONS; i++) {
 874                         if (cpu_time_per_iter[i] == -1)
 875                                 continue;
 876                         delta = (double)(rules_batch /
 877                                 cpu_time_per_iter[i]);
 878                         flows_rate = delta / 1000;
 879                         printf(":: Iteration #%d: %d flows "
 880                                 "in %f sec[ Rate = %f K/Sec ]\n",
 881                                 i, rules_batch,
 882                                 cpu_time_per_iter[i], flows_rate);
 883                 }
 884
 885         /* Deletion rate for all flows */
 886         flows_rate = ((double) (rules_count / cpu_time_used) / 1000);
 887         printf("\n:: Total flow deletion rate -> %f K/Sec\n",
 888                 flows_rate);
 889         printf(":: The time for deleting %d in flows %f seconds\n",
 890                 rules_count, cpu_time_used);
 891 }
 892
 893 static inline void
 894 flows_handler(void)
 895 {
 896         struct rte_flow **flow_list;
 897         struct rte_flow_error error;
 898         clock_t start_iter, end_iter;
 899         double cpu_time_used;
 900         double flows_rate;
 901         double cpu_time_per_iter[MAX_ITERATIONS];
 902         double delta;
 903         uint16_t nr_ports;
 904         uint32_t i;
 905         int port_id;
 906         int iter_id;
 907         uint32_t flow_index;
 908         uint64_t global_items[MAX_ITEMS_NUM] = { 0 };
 909         uint64_t global_actions[MAX_ACTIONS_NUM] = { 0 };
 910
 911         global_items[0] = FLOW_ITEM_MASK(RTE_FLOW_ITEM_TYPE_ETH);
 912         global_actions[0] = FLOW_ITEM_MASK(RTE_FLOW_ACTION_TYPE_JUMP);
 913
 914         nr_ports = rte_eth_dev_count_avail();
 915
 916         for (i = 0; i < MAX_ITERATIONS; i++)
 917                 cpu_time_per_iter[i] = -1;
 918
 919         if (rules_batch > rules_count)
 920                 rules_batch = rules_count;
 921
 922         printf(":: Flows Count per port: %d\n", rules_count);
 923
 924         flow_list = rte_zmalloc("flow_list",
 925                 (sizeof(struct rte_flow *) * rules_count) + 1, 0);
 926         if (flow_list == NULL)
 927                 rte_exit(EXIT_FAILURE, "No Memory available!");
 928
 929         for (port_id = 0; port_id < nr_ports; port_id++) {
 930                 /* If port outside portmask */
 931                 if (!((ports_mask >> port_id) & 0x1))
 932                         continue;
 933                 cpu_time_used = 0;
 934                 flow_index = 0;
 935                 if (flow_group > 0) {
 936                         /*
 937                          * Create global rule to jump into flow_group,
 938                          * this way the app will avoid the default rules.
 939                          *
 940                          * Global rule:
 941                          * group 0 eth / end actions jump group <flow_group>
 942                          *
 943                          */
 944                         flow = generate_flow(port_id, 0, flow_attrs,
 945                                 global_items, global_actions,
 946                                 flow_group, 0, 0, 0, 0, &error);
 947
 948                         if (flow == NULL) {
 949                                 print_flow_error(error);
 950                                 rte_exit(EXIT_FAILURE, "error in creating flow");
 951                         }
 952                         flow_list[flow_index++] = flow;
 953                 }
 954
 955                 /* Insertion Rate */
 956                 printf("Flows insertion on port = %d\n", port_id);
 957                 start_iter = clock();
 958                 for (i = 0; i < rules_count; i++) {
 959                         flow = generate_flow(port_id, flow_group,
 960                                 flow_attrs, flow_items, flow_actions,
 961                                 JUMP_ACTION_TABLE, i,
 962                                 hairpin_queues_num,
 963                                 encap_data, decap_data,
 964                                 &error);
 965
 966                         if (force_quit)
 967                                 i = rules_count;
 968
 969                         if (!flow) {
 970                                 print_flow_error(error);
 971                                 rte_exit(EXIT_FAILURE, "error in creating flow");
 972                         }
 973
 974                         flow_list[flow_index++] = flow;
 975
 976                         if (i && !((i + 1) % rules_batch)) {
 977                                 /* Save the insertion rate of each iter */
 978                                 end_iter = clock();
 979                                 delta = (double) (end_iter - start_iter);
 980                                 iter_id = ((i + 1) / rules_batch) - 1;
 981                                 cpu_time_per_iter[iter_id] =
 982                                         delta / CLOCKS_PER_SEC;
 983                                 cpu_time_used += cpu_time_per_iter[iter_id];
 984                                 start_iter = clock();
 985                         }
 986                 }
 987
 988                 /* Iteration rate per iteration */
 989                 if (dump_iterations)
 990                         for (i = 0; i < MAX_ITERATIONS; i++) {
 991                                 if (cpu_time_per_iter[i] == -1)
 992                                         continue;
 993                                 delta = (double)(rules_batch /
 994                                         cpu_time_per_iter[i]);
 995                                 flows_rate = delta / 1000;
 996                                 printf(":: Iteration #%d: %d flows "
 997                                         "in %f sec[ Rate = %f K/Sec ]\n",
 998                                         i, rules_batch,
 999                                         cpu_time_per_iter[i], flows_rate);
1000                         }
1001
1002                 /* Insertion rate for all flows */
1003                 flows_rate = ((double) (rules_count / cpu_time_used) / 1000);
1004                 printf("\n:: Total flow insertion rate -> %f K/Sec\n",
1005                                                 flows_rate);
1006                 printf(":: The time for creating %d in flows %f seconds\n",
1007                                                 rules_count, cpu_time_used);
1008
1009                 if (delete_flag)
1010                         destroy_flows(port_id, flow_list);
1011         }
1012 }
1013
1014 static void
1015 signal_handler(int signum)
1016 {
1017         if (signum == SIGINT || signum == SIGTERM) {
1018                 printf("\n\nSignal %d received, preparing to exit...\n",
1019                                         signum);
1020                 printf("Error: Stats are wrong due to sudden signal!\n\n");
1021                 force_quit = true;
1022         }
1023 }
1024
1025 static inline uint16_t
1026 do_rx(struct lcore_info *li, uint16_t rx_port, uint16_t rx_queue)
1027 {
1028         uint16_t cnt = 0;
1029         cnt = rte_eth_rx_burst(rx_port, rx_queue, li->pkts, MAX_PKT_BURST);
1030         li->rx_pkts += cnt;
1031         return cnt;
1032 }
1033
1034 static inline void
1035 do_tx(struct lcore_info *li, uint16_t cnt, uint16_t tx_port,
1036                         uint16_t tx_queue)
1037 {
1038         uint16_t nr_tx = 0;
1039         uint16_t i;
1040
1041         nr_tx = rte_eth_tx_burst(tx_port, tx_queue, li->pkts, cnt);
1042         li->tx_pkts  += nr_tx;
1043         li->tx_drops += cnt - nr_tx;
1044
1045         for (i = nr_tx; i < cnt; i++)
1046                 rte_pktmbuf_free(li->pkts[i]);
1047 }
1048
1049 /*
1050  * Method to convert numbers into pretty numbers that easy
1051  * to read. The design here is to add comma after each three
1052  * digits and set all of this inside buffer.
1053  *
1054  * For example if n = 1799321, the output will be
1055  * 1,799,321 after this method which is easier to read.
1056  */
1057 static char *
1058 pretty_number(uint64_t n, char *buf)
1059 {
1060         char p[6][4];
1061         int i = 0;
1062         int off = 0;
1063
1064         while (n > 1000) {
1065                 sprintf(p[i], "%03d", (int)(n % 1000));
1066                 n /= 1000;
1067                 i += 1;
1068         }
1069
1070         sprintf(p[i++], "%d", (int)n);
1071
1072         while (i--)
1073                 off += sprintf(buf + off, "%s,", p[i]);
1074         buf[strlen(buf) - 1] = '\0';
1075
1076         return buf;
1077 }
1078
1079 static void
1080 packet_per_second_stats(void)
1081 {
1082         struct lcore_info *old;
1083         struct lcore_info *li, *oli;
1084         int nr_lines = 0;
1085         int i;
1086
1087         old = rte_zmalloc("old",
1088                 sizeof(struct lcore_info) * MAX_LCORES, 0);
1089         if (old == NULL)
1090                 rte_exit(EXIT_FAILURE, "No Memory available!");
1091
1092         memcpy(old, lcore_infos,
1093                 sizeof(struct lcore_info) * MAX_LCORES);
1094
1095         while (!force_quit) {
1096                 uint64_t total_tx_pkts = 0;
1097                 uint64_t total_rx_pkts = 0;
1098                 uint64_t total_tx_drops = 0;
1099                 uint64_t tx_delta, rx_delta, drops_delta;
1100                 char buf[3][32];
1101                 int nr_valid_core = 0;
1102
1103                 sleep(1);
1104
1105                 if (nr_lines) {
1106                         char go_up_nr_lines[16];
1107
1108                         sprintf(go_up_nr_lines, "%c[%dA\r", 27, nr_lines);
1109                         printf("%s\r", go_up_nr_lines);
1110                 }
1111
1112                 printf("\n%6s %16s %16s %16s\n", "core", "tx", "tx drops", "rx");
1113                 printf("%6s %16s %16s %16s\n", "------", "----------------",
1114                         "----------------", "----------------");
1115                 nr_lines = 3;
1116                 for (i = 0; i < MAX_LCORES; i++) {
1117                         li  = &lcore_infos[i];
1118                         oli = &old[i];
1119                         if (li->mode != LCORE_MODE_PKT)
1120                                 continue;
1121
1122                         tx_delta    = li->tx_pkts  - oli->tx_pkts;
1123                         rx_delta    = li->rx_pkts  - oli->rx_pkts;
1124                         drops_delta = li->tx_drops - oli->tx_drops;
1125                         printf("%6d %16s %16s %16s\n", i,
1126                                 pretty_number(tx_delta,    buf[0]),
1127                                 pretty_number(drops_delta, buf[1]),
1128                                 pretty_number(rx_delta,    buf[2]));
1129
1130                         total_tx_pkts  += tx_delta;
1131                         total_rx_pkts  += rx_delta;
1132                         total_tx_drops += drops_delta;
1133
1134                         nr_valid_core++;
1135                         nr_lines += 1;
1136                 }
1137
1138                 if (nr_valid_core > 1) {
1139                         printf("%6s %16s %16s %16s\n", "total",
1140                                 pretty_number(total_tx_pkts,  buf[0]),
1141                                 pretty_number(total_tx_drops, buf[1]),
1142                                 pretty_number(total_rx_pkts,  buf[2]));
1143                         nr_lines += 1;
1144                 }
1145
1146                 memcpy(old, lcore_infos,
1147                         sizeof(struct lcore_info) * MAX_LCORES);
1148         }
1149 }
1150
1151 static int
1152 start_forwarding(void *data __rte_unused)
1153 {
1154         int lcore = rte_lcore_id();
1155         int stream_id;
1156         uint16_t cnt;
1157         struct lcore_info *li = &lcore_infos[lcore];
1158
1159         if (!li->mode)
1160                 return 0;
1161
1162         if (li->mode == LCORE_MODE_STATS) {
1163                 printf(":: started stats on lcore %u\n", lcore);
1164                 packet_per_second_stats();
1165                 return 0;
1166         }
1167
1168         while (!force_quit)
1169                 for (stream_id = 0; stream_id < MAX_STREAMS; stream_id++) {
1170                         if (li->streams[stream_id].rx_port == -1)
1171                                 continue;
1172
1173                         cnt = do_rx(li,
1174                                         li->streams[stream_id].rx_port,
1175                                         li->streams[stream_id].rx_queue);
1176                         if (cnt)
1177                                 do_tx(li, cnt,
1178                                         li->streams[stream_id].tx_port,
1179                                         li->streams[stream_id].tx_queue);
1180                 }
1181         return 0;
1182 }
1183
1184 static void
1185 init_lcore_info(void)
1186 {
1187         int i, j;
1188         unsigned int lcore;
1189         uint16_t nr_port;
1190         uint16_t queue;
1191         int port;
1192         int stream_id = 0;
1193         int streams_per_core;
1194         int unassigned_streams;
1195         int nb_fwd_streams;
1196         nr_port = rte_eth_dev_count_avail();
1197
1198         /* First logical core is reserved for stats printing */
1199         lcore = rte_get_next_lcore(-1, 0, 0);
1200         lcore_infos[lcore].mode = LCORE_MODE_STATS;
1201
1202         /*
1203          * Initialize all cores
1204          * All cores at first must have -1 value in all streams
1205          * This means that this stream is not used, or not set
1206          * yet.
1207          */
1208         for (i = 0; i < MAX_LCORES; i++)
1209                 for (j = 0; j < MAX_STREAMS; j++) {
1210                         lcore_infos[i].streams[j].tx_port = -1;
1211                         lcore_infos[i].streams[j].rx_port = -1;
1212                         lcore_infos[i].streams[j].tx_queue = -1;
1213                         lcore_infos[i].streams[j].rx_queue = -1;
1214                         lcore_infos[i].streams_nb = 0;
1215                 }
1216
1217         /*
1218          * Calculate the total streams count.
1219          * Also distribute those streams count between the available
1220          * logical cores except first core, since it's reserved for
1221          * stats prints.
1222          */
1223         nb_fwd_streams = nr_port * RXQ_NUM;
1224         if ((int)(nb_lcores - 1) >= nb_fwd_streams)
1225                 for (i = 0; i < (int)(nb_lcores - 1); i++) {
1226                         lcore = rte_get_next_lcore(lcore, 0, 0);
1227                         lcore_infos[lcore].streams_nb = 1;
1228                 }
1229         else {
1230                 streams_per_core = nb_fwd_streams / (nb_lcores - 1);
1231                 unassigned_streams = nb_fwd_streams % (nb_lcores - 1);
1232                 for (i = 0; i < (int)(nb_lcores - 1); i++) {
1233                         lcore = rte_get_next_lcore(lcore, 0, 0);
1234                         lcore_infos[lcore].streams_nb = streams_per_core;
1235                         if (unassigned_streams) {
1236                                 lcore_infos[lcore].streams_nb++;
1237                                 unassigned_streams--;
1238                         }
1239                 }
1240         }
1241
1242         /*
1243          * Set the streams for the cores according to each logical
1244          * core stream count.
1245          * The streams is built on the design of what received should
1246          * forward as well, this means that if you received packets on
1247          * port 0 queue 0 then the same queue should forward the
1248          * packets, using the same logical core.
1249          */
1250         lcore = rte_get_next_lcore(-1, 0, 0);
1251         for (port = 0; port < nr_port; port++) {
1252                 /* Create FWD stream */
1253                 for (queue = 0; queue < RXQ_NUM; queue++) {
1254                         if (!lcore_infos[lcore].streams_nb ||
1255                                 !(stream_id % lcore_infos[lcore].streams_nb)) {
1256                                 lcore = rte_get_next_lcore(lcore, 0, 0);
1257                                 lcore_infos[lcore].mode = LCORE_MODE_PKT;
1258                                 stream_id = 0;
1259                         }
1260                         lcore_infos[lcore].streams[stream_id].rx_queue = queue;
1261                         lcore_infos[lcore].streams[stream_id].tx_queue = queue;
1262                         lcore_infos[lcore].streams[stream_id].rx_port = port;
1263                         lcore_infos[lcore].streams[stream_id].tx_port = port;
1264                         stream_id++;
1265                 }
1266         }
1267
1268         /* Print all streams */
1269         printf(":: Stream -> core id[N]: (rx_port, rx_queue)->(tx_port, tx_queue)\n");
1270         for (i = 0; i < MAX_LCORES; i++)
1271                 for (j = 0; j < MAX_STREAMS; j++) {
1272                         /* No streams for this core */
1273                         if (lcore_infos[i].streams[j].tx_port == -1)
1274                                 break;
1275                         printf("Stream -> core id[%d]: (%d,%d)->(%d,%d)\n",
1276                                 i,
1277                                 lcore_infos[i].streams[j].rx_port,
1278                                 lcore_infos[i].streams[j].rx_queue,
1279                                 lcore_infos[i].streams[j].tx_port,
1280                                 lcore_infos[i].streams[j].tx_queue);
1281                 }
1282 }
1283
1284 static void
1285 init_port(void)
1286 {
1287         int ret;
1288         uint16_t std_queue;
1289         uint16_t hairpin_queue;
1290         uint16_t port_id;
1291         uint16_t nr_ports;
1292         uint16_t nr_queues;
1293         struct rte_eth_hairpin_conf hairpin_conf = {
1294                 .peer_count = 1,
1295         };
1296         struct rte_eth_conf port_conf = {
1297                 .rx_adv_conf = {
1298                         .rss_conf.rss_hf =
1299                                 GET_RSS_HF(),
1300                 }
1301         };
1302         struct rte_eth_txconf txq_conf;
1303         struct rte_eth_rxconf rxq_conf;
1304         struct rte_eth_dev_info dev_info;
1305
1306         nr_queues = RXQ_NUM;
1307         if (hairpin_queues_num != 0)
1308                 nr_queues = RXQ_NUM + hairpin_queues_num;
1309
1310         nr_ports = rte_eth_dev_count_avail();
1311         if (nr_ports == 0)
1312                 rte_exit(EXIT_FAILURE, "Error: no port detected\n");
1313
1314         mbuf_mp = rte_pktmbuf_pool_create("mbuf_pool",
1315                                         TOTAL_MBUF_NUM, MBUF_CACHE_SIZE,
1316                                         0, MBUF_SIZE,
1317                                         rte_socket_id());
1318         if (mbuf_mp == NULL)
1319                 rte_exit(EXIT_FAILURE, "Error: can't init mbuf pool\n");
1320
1321         for (port_id = 0; port_id < nr_ports; port_id++) {
1322                 ret = rte_eth_dev_info_get(port_id, &dev_info);
1323                 if (ret != 0)
1324                         rte_exit(EXIT_FAILURE,
1325                                 "Error during getting device"
1326                                 " (port %u) info: %s\n",
1327                                 port_id, strerror(-ret));
1328
1329                 port_conf.txmode.offloads &= dev_info.tx_offload_capa;
1330                 port_conf.rxmode.offloads &= dev_info.rx_offload_capa;
1331
1332                 printf(":: initializing port: %d\n", port_id);
1333
1334                 ret = rte_eth_dev_configure(port_id, nr_queues,
1335                                 nr_queues, &port_conf);
1336                 if (ret < 0)
1337                         rte_exit(EXIT_FAILURE,
1338                                 ":: cannot configure device: err=%d, port=%u\n",
1339                                 ret, port_id);
1340
1341                 rxq_conf = dev_info.default_rxconf;
1342                 for (std_queue = 0; std_queue < RXQ_NUM; std_queue++) {
1343                         ret = rte_eth_rx_queue_setup(port_id, std_queue, NR_RXD,
1344                                         rte_eth_dev_socket_id(port_id),
1345                                         &rxq_conf,
1346                                         mbuf_mp);
1347                         if (ret < 0)
1348                                 rte_exit(EXIT_FAILURE,
1349                                         ":: Rx queue setup failed: err=%d, port=%u\n",
1350                                         ret, port_id);
1351                 }
1352
1353                 txq_conf = dev_info.default_txconf;
1354                 for (std_queue = 0; std_queue < TXQ_NUM; std_queue++) {
1355                         ret = rte_eth_tx_queue_setup(port_id, std_queue, NR_TXD,
1356                                         rte_eth_dev_socket_id(port_id),
1357                                         &txq_conf);
1358                         if (ret < 0)
1359                                 rte_exit(EXIT_FAILURE,
1360                                         ":: Tx queue setup failed: err=%d, port=%u\n",
1361                                         ret, port_id);
1362                 }
1363
1364                 /* Catch all packets from traffic generator. */
1365                 ret = rte_eth_promiscuous_enable(port_id);
1366                 if (ret != 0)
1367                         rte_exit(EXIT_FAILURE,
1368                                 ":: promiscuous mode enable failed: err=%s, port=%u\n",
1369                                 rte_strerror(-ret), port_id);
1370
1371                 if (hairpin_queues_num != 0) {
1372                         /*
1373                          * Configure peer which represents hairpin Tx.
1374                          * Hairpin queue numbers start after standard queues
1375                          * (RXQ_NUM and TXQ_NUM).
1376                          */
1377                         for (hairpin_queue = RXQ_NUM, std_queue = 0;
1378                                         hairpin_queue < nr_queues;
1379                                         hairpin_queue++, std_queue++) {
1380                                 hairpin_conf.peers[0].port = port_id;
1381                                 hairpin_conf.peers[0].queue =
1382                                         std_queue + TXQ_NUM;
1383                                 ret = rte_eth_rx_hairpin_queue_setup(
1384                                                 port_id, hairpin_queue,
1385                                                 NR_RXD, &hairpin_conf);
1386                                 if (ret != 0)
1387                                         rte_exit(EXIT_FAILURE,
1388                                                 ":: Hairpin rx queue setup failed: err=%d, port=%u\n",
1389                                                 ret, port_id);
1390                         }
1391
1392                         for (hairpin_queue = TXQ_NUM, std_queue = 0;
1393                                         hairpin_queue < nr_queues;
1394                                         hairpin_queue++, std_queue++) {
1395                                 hairpin_conf.peers[0].port = port_id;
1396                                 hairpin_conf.peers[0].queue =
1397                                         std_queue + RXQ_NUM;
1398                                 ret = rte_eth_tx_hairpin_queue_setup(
1399                                                 port_id, hairpin_queue,
1400                                                 NR_TXD, &hairpin_conf);
1401                                 if (ret != 0)
1402                                         rte_exit(EXIT_FAILURE,
1403                                                 ":: Hairpin tx queue setup failed: err=%d, port=%u\n",
1404                                                 ret, port_id);
1405                         }
1406                 }
1407
1408                 ret = rte_eth_dev_start(port_id);
1409                 if (ret < 0)
1410                         rte_exit(EXIT_FAILURE,
1411                                 "rte_eth_dev_start:err=%d, port=%u\n",
1412                                 ret, port_id);
1413
1414                 printf(":: initializing port: %d done\n", port_id);
1415         }
1416 }
1417
1418 int
1419 main(int argc, char **argv)
1420 {
1421         int ret;
1422         uint16_t port;
1423         struct rte_flow_error error;
1424         int64_t alloc, last_alloc;
1425
1426         ret = rte_eal_init(argc, argv);
1427         if (ret < 0)
1428                 rte_exit(EXIT_FAILURE, "EAL init failed\n");
1429
1430         force_quit = false;
1431         dump_iterations = false;
1432         rules_count = DEFAULT_RULES_COUNT;
1433         rules_batch = DEFAULT_RULES_BATCH;
1434         delete_flag = false;
1435         dump_socket_mem_flag = false;
1436         flow_group = DEFAULT_GROUP;
1437
1438         signal(SIGINT, signal_handler);
1439         signal(SIGTERM, signal_handler);
1440
1441         argc -= ret;
1442         argv += ret;
1443         if (argc > 1)
1444                 args_parse(argc, argv);
1445
1446         init_port();
1447
1448         nb_lcores = rte_lcore_count();
1449         if (nb_lcores <= 1)
1450                 rte_exit(EXIT_FAILURE, "This app needs at least two cores\n");
1451
1452         last_alloc = (int64_t)dump_socket_mem(stdout);
1453         flows_handler();
1454         alloc = (int64_t)dump_socket_mem(stdout);
1455
1456         if (last_alloc)
1457                 fprintf(stdout, ":: Memory allocation change(M): %.6lf\n",
1458                 (alloc - last_alloc) / 1.0e6);
1459
1460         if (enable_fwd) {
1461                 init_lcore_info();
1462                 rte_eal_mp_remote_launch(start_forwarding, NULL, CALL_MAIN);
1463         }
1464
1465         RTE_ETH_FOREACH_DEV(port) {
1466                 rte_flow_flush(port, &error);
1467                 if (rte_eth_dev_stop(port) != 0)
1468                         printf("Failed to stop device on port %u\n", port);
1469                 rte_eth_dev_close(port);
1470         }
1471         return 0;
1472 }