4 * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 #include <sys/types.h>
46 #include <sys/queue.h>
53 #include <rte_common.h>
54 #include <rte_byteorder.h>
56 #include <rte_debug.h>
57 #include <rte_cycles.h>
58 #include <rte_memory.h>
59 #include <rte_memzone.h>
60 #include <rte_launch.h>
62 #include <rte_per_lcore.h>
63 #include <rte_lcore.h>
64 #include <rte_atomic.h>
65 #include <rte_branch_prediction.h>
66 #include <rte_mempool.h>
67 #include <rte_interrupts.h>
69 #include <rte_ether.h>
70 #include <rte_ethdev.h>
71 #include <rte_string_fns.h>
72 #ifdef RTE_LIBRTE_CMDLINE
73 #include <cmdline_parse.h>
74 #include <cmdline_parse_etheraddr.h>
76 #ifdef RTE_LIBRTE_PMD_BOND
77 #include <rte_eth_bond.h>
87 #ifdef RTE_LIBRTE_CMDLINE
90 "[--help|-h] | [--auto-start|-a] | ["
91 "--coremask=COREMASK --portmask=PORTMASK --numa "
92 "--mbuf-size= | --total-num-mbufs= | "
93 "--nb-cores= | --nb-ports= | "
94 #ifdef RTE_LIBRTE_CMDLINE
95 "--eth-peers-configfile= | "
96 "--eth-peer=X,M:M:M:M:M:M | "
98 "--pkt-filter-mode= |"
99 "--rss-ip | --rss-udp | "
100 "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
101 "--txpt= | --txht= | --txwt= | --txfreet= | "
102 "--txrst= | --txqflags= ]\n",
104 #ifdef RTE_LIBRTE_CMDLINE
105 printf(" --interactive: run in interactive mode.\n");
107 printf(" --auto-start: start forwarding on init "
108 "[always when non-interactive].\n");
109 printf(" --help: display this message and quit.\n");
110 printf(" --nb-cores=N: set the number of forwarding cores "
111 "(1 <= N <= %d).\n", nb_lcores);
112 printf(" --nb-ports=N: set the number of forwarding ports "
113 "(1 <= N <= %d).\n", nb_ports);
114 printf(" --coremask=COREMASK: hexadecimal bitmask of cores running "
115 "the packet forwarding test. The master lcore is reserved for "
116 "command line parsing only, and cannot be masked on for "
117 "packet forwarding.\n");
118 printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
119 "by the packet forwarding test.\n");
120 printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
121 "RX memory buffers (mbufs).\n");
122 printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
123 "specify the socket on which the memory pool "
124 "used by the port will be allocated.\n");
125 printf(" --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
126 "specify the socket on which the TX/RX rings for "
127 "the port will be allocated "
128 "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
129 printf(" --socket-num=N: set socket from which all memory is allocated "
131 printf(" --mbuf-size=N: set the data size of mbuf to N bytes.\n");
132 printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
134 printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
135 #ifdef RTE_LIBRTE_CMDLINE
136 printf(" --eth-peers-configfile=name: config file with ethernet addresses "
138 printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
139 "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
141 printf(" --pkt-filter-mode=N: set Flow Director mode "
142 "(N: none (default mode) or signature or perfect).\n");
143 printf(" --pkt-filter-report-hash=N: set Flow Director report mode "
144 "(N: none or match (default) or always).\n");
145 printf(" --pkt-filter-size=N: set Flow Director mode "
146 "(N: 64K (default mode) or 128K or 256K).\n");
147 printf(" --pkt-filter-drop-queue=N: set drop-queue. "
148 "In perfect mode, when you add a rule with queue = -1 "
149 "the packet will be enqueued into the rx drop-queue. "
150 "If the drop-queue doesn't exist, the packet is dropped. "
151 "By default drop-queue=127.\n");
152 #ifdef RTE_LIBRTE_LATENCY_STATS
153 printf(" --latencystats=N: enable latency and jitter statistcs "
154 "monitoring on forwarding lcore id N.\n");
156 printf(" --disable-crc-strip: disable CRC stripping by hardware.\n");
157 printf(" --enable-lro: enable large receive offload.\n");
158 printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n");
159 printf(" --disable-hw-vlan: disable hardware vlan.\n");
160 printf(" --disable-hw-vlan-filter: disable hardware vlan filter.\n");
161 printf(" --disable-hw-vlan-strip: disable hardware vlan strip.\n");
162 printf(" --disable-hw-vlan-extend: disable hardware vlan extend.\n");
163 printf(" --enable-drop-en: enable per queue packet drop.\n");
164 printf(" --disable-rss: disable rss.\n");
165 printf(" --port-topology=N: set port topology (N: paired (default) or "
167 printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
168 list_pkt_forwarding_modes());
169 printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
170 printf(" --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
171 printf(" --rxq=N: set the number of RX queues per port to N.\n");
172 printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
173 printf(" --txq=N: set the number of TX queues per port to N.\n");
174 printf(" --txd=N: set the number of descriptors in TX rings to N.\n");
175 printf(" --burst=N: set the number of packets per burst to N.\n");
176 printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
177 printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
178 printf(" --rxht=N: set the host threshold register of RX rings to N.\n");
179 printf(" --rxfreet=N: set the free threshold of RX descriptors to N "
180 "(0 <= N < value of rxd).\n");
181 printf(" --rxwt=N: set the write-back threshold register of RX rings to N.\n");
182 printf(" --txpt=N: set the prefetch threshold register of TX rings to N.\n");
183 printf(" --txht=N: set the nhost threshold register of TX rings to N.\n");
184 printf(" --txwt=N: set the write-back threshold register of TX rings to N.\n");
185 printf(" --txfreet=N: set the transmit free threshold of TX rings to N "
186 "(0 <= N <= value of txd).\n");
187 printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N "
188 "(0 <= N <= value of txd).\n");
189 printf(" --txqflags=0xXXXXXXXX: hexadecimal bitmask of TX queue flags "
190 "(0 <= N <= 0x7FFFFFFF).\n");
191 printf(" --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
192 "tx queues statistics counters mapping "
193 "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
194 printf(" --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
195 "rx queues statistics counters mapping "
196 "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
197 printf(" --no-flush-rx: Don't flush RX streams before forwarding."
198 " Used mainly with PCAP drivers.\n");
199 printf(" --txpkts=X[,Y]*: set TX segment sizes"
200 " or total packet length.\n");
201 printf(" --disable-link-check: disable check on link status when "
202 "starting/stopping ports.\n");
205 #ifdef RTE_LIBRTE_CMDLINE
207 init_peer_eth_addrs(char *config_filename)
213 config_file = fopen(config_filename, "r");
214 if (config_file == NULL) {
215 perror("Failed to open eth config file\n");
219 for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
221 if (fgets(buf, sizeof(buf), config_file) == NULL)
224 if (cmdline_parse_etheraddr(NULL, buf, &peer_eth_addrs[i],
225 sizeof(peer_eth_addrs[i])) < 0) {
226 printf("Bad MAC address format on line %d\n", i+1);
232 nb_peer_eth_addrs = (portid_t) i;
238 * Parse the coremask given as argument (hexadecimal string) and set
239 * the global configuration of forwarding cores.
242 parse_fwd_coremask(const char *coremask)
245 unsigned long long int cm;
247 /* parse hexadecimal string */
249 cm = strtoull(coremask, &end, 16);
250 if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
251 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
252 else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
253 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
257 * Parse the coremask given as argument (hexadecimal string) and set
258 * the global configuration of forwarding cores.
261 parse_fwd_portmask(const char *portmask)
264 unsigned long long int pm;
266 /* parse hexadecimal string */
268 pm = strtoull(portmask, &end, 16);
269 if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
270 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
272 set_fwd_ports_mask((uint64_t) pm);
277 parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
280 const char *p, *p0 = q_arg;
288 unsigned long int_fld[_NUM_FLD];
289 char *str_fld[_NUM_FLD];
293 /* reset from value set at definition */
294 is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
296 while ((p = strchr(p0,'(')) != NULL) {
298 if((p0 = strchr(p,')')) == NULL)
302 if(size >= sizeof(s))
305 snprintf(s, sizeof(s), "%.*s", size, p);
306 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
308 for (i = 0; i < _NUM_FLD; i++){
310 int_fld[i] = strtoul(str_fld[i], &end, 0);
311 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
314 /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
315 if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
316 printf("Stats counter not in the correct range 0..%d\n",
317 RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
322 if ((nb_tx_queue_stats_mappings >=
323 MAX_TX_QUEUE_STATS_MAPPINGS)) {
324 printf("exceeded max number of TX queue "
325 "statistics mappings: %hu\n",
326 nb_tx_queue_stats_mappings);
329 tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
330 (uint8_t)int_fld[FLD_PORT];
331 tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
332 (uint8_t)int_fld[FLD_QUEUE];
333 tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
334 (uint8_t)int_fld[FLD_STATS_COUNTER];
335 ++nb_tx_queue_stats_mappings;
338 if ((nb_rx_queue_stats_mappings >=
339 MAX_RX_QUEUE_STATS_MAPPINGS)) {
340 printf("exceeded max number of RX queue "
341 "statistics mappings: %hu\n",
342 nb_rx_queue_stats_mappings);
345 rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
346 (uint8_t)int_fld[FLD_PORT];
347 rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
348 (uint8_t)int_fld[FLD_QUEUE];
349 rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
350 (uint8_t)int_fld[FLD_STATS_COUNTER];
351 ++nb_rx_queue_stats_mappings;
355 /* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
356 /* than to the default array (that was set at its definition) */
357 is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
358 (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
363 parse_portnuma_config(const char *q_arg)
366 const char *p, *p0 = q_arg;
368 uint8_t i,port_id,socket_id;
375 unsigned long int_fld[_NUM_FLD];
376 char *str_fld[_NUM_FLD];
379 /* reset from value set at definition */
380 while ((p = strchr(p0,'(')) != NULL) {
382 if((p0 = strchr(p,')')) == NULL)
386 if(size >= sizeof(s))
389 snprintf(s, sizeof(s), "%.*s", size, p);
390 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
392 for (i = 0; i < _NUM_FLD; i++) {
394 int_fld[i] = strtoul(str_fld[i], &end, 0);
395 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
398 port_id = (uint8_t)int_fld[FLD_PORT];
399 if (port_id_is_invalid(port_id, ENABLED_WARN)) {
400 printf("Valid port range is [0");
401 RTE_ETH_FOREACH_DEV(pid)
406 socket_id = (uint8_t)int_fld[FLD_SOCKET];
407 if(socket_id >= max_socket) {
408 printf("Invalid socket id, range is [0, %d]\n",
412 port_numa[port_id] = socket_id;
419 parse_ringnuma_config(const char *q_arg)
422 const char *p, *p0 = q_arg;
424 uint8_t i,port_id,ring_flag,socket_id;
432 unsigned long int_fld[_NUM_FLD];
433 char *str_fld[_NUM_FLD];
435 #define RX_RING_ONLY 0x1
436 #define TX_RING_ONLY 0x2
437 #define RXTX_RING 0x3
439 /* reset from value set at definition */
440 while ((p = strchr(p0,'(')) != NULL) {
442 if((p0 = strchr(p,')')) == NULL)
446 if(size >= sizeof(s))
449 snprintf(s, sizeof(s), "%.*s", size, p);
450 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
452 for (i = 0; i < _NUM_FLD; i++) {
454 int_fld[i] = strtoul(str_fld[i], &end, 0);
455 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
458 port_id = (uint8_t)int_fld[FLD_PORT];
459 if (port_id_is_invalid(port_id, ENABLED_WARN)) {
460 printf("Valid port range is [0");
461 RTE_ETH_FOREACH_DEV(pid)
466 socket_id = (uint8_t)int_fld[FLD_SOCKET];
467 if (socket_id >= max_socket) {
468 printf("Invalid socket id, range is [0, %d]\n",
472 ring_flag = (uint8_t)int_fld[FLD_FLAG];
473 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
474 printf("Invalid ring-flag=%d config for port =%d\n",
479 switch (ring_flag & RXTX_RING) {
481 rxring_numa[port_id] = socket_id;
484 txring_numa[port_id] = socket_id;
487 rxring_numa[port_id] = socket_id;
488 txring_numa[port_id] = socket_id;
491 printf("Invalid ring-flag=%d config for port=%d\n",
501 launch_args_parse(int argc, char** argv)
508 static struct option lgopts[] = {
510 #ifdef RTE_LIBRTE_CMDLINE
511 { "interactive", 0, 0, 0 },
512 { "auto-start", 0, 0, 0 },
513 { "eth-peers-configfile", 1, 0, 0 },
514 { "eth-peer", 1, 0, 0 },
516 { "ports", 1, 0, 0 },
517 { "nb-cores", 1, 0, 0 },
518 { "nb-ports", 1, 0, 0 },
519 { "coremask", 1, 0, 0 },
520 { "portmask", 1, 0, 0 },
522 { "mp-anon", 0, 0, 0 },
523 { "port-numa-config", 1, 0, 0 },
524 { "ring-numa-config", 1, 0, 0 },
525 { "socket-num", 1, 0, 0 },
526 { "mbuf-size", 1, 0, 0 },
527 { "total-num-mbufs", 1, 0, 0 },
528 { "max-pkt-len", 1, 0, 0 },
529 { "pkt-filter-mode", 1, 0, 0 },
530 { "pkt-filter-report-hash", 1, 0, 0 },
531 { "pkt-filter-size", 1, 0, 0 },
532 { "pkt-filter-drop-queue", 1, 0, 0 },
533 #ifdef RTE_LIBRTE_LATENCY_STATS
534 { "latencystats", 1, 0, 0 },
536 { "disable-crc-strip", 0, 0, 0 },
537 { "enable-lro", 0, 0, 0 },
538 { "enable-rx-cksum", 0, 0, 0 },
539 { "enable-scatter", 0, 0, 0 },
540 { "disable-hw-vlan", 0, 0, 0 },
541 { "disable-hw-vlan-filter", 0, 0, 0 },
542 { "disable-hw-vlan-strip", 0, 0, 0 },
543 { "disable-hw-vlan-extend", 0, 0, 0 },
544 { "enable-drop-en", 0, 0, 0 },
545 { "disable-rss", 0, 0, 0 },
546 { "port-topology", 1, 0, 0 },
547 { "forward-mode", 1, 0, 0 },
548 { "rss-ip", 0, 0, 0 },
549 { "rss-udp", 0, 0, 0 },
554 { "burst", 1, 0, 0 },
555 { "mbcache", 1, 0, 0 },
559 { "txfreet", 1, 0, 0 },
560 { "txrst", 1, 0, 0 },
561 { "txqflags", 1, 0, 0 },
565 { "rxfreet", 1, 0, 0 },
566 { "tx-queue-stats-mapping", 1, 0, 0 },
567 { "rx-queue-stats-mapping", 1, 0, 0 },
568 { "no-flush-rx", 0, 0, 0 },
569 { "txpkts", 1, 0, 0 },
570 { "disable-link-check", 0, 0, 0 },
576 #ifdef RTE_LIBRTE_CMDLINE
577 #define SHORTOPTS "i"
581 while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
582 lgopts, &opt_idx)) != EOF) {
584 #ifdef RTE_LIBRTE_CMDLINE
586 printf("Interactive-mode selected\n");
591 printf("Auto-start selected\n");
595 case 0: /*long options */
596 if (!strcmp(lgopts[opt_idx].name, "help")) {
598 rte_exit(EXIT_SUCCESS, "Displayed help\n");
600 #ifdef RTE_LIBRTE_CMDLINE
601 if (!strcmp(lgopts[opt_idx].name, "interactive")) {
602 printf("Interactive-mode selected\n");
605 if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
606 printf("Auto-start selected\n");
609 if (!strcmp(lgopts[opt_idx].name,
610 "eth-peers-configfile")) {
611 if (init_peer_eth_addrs(optarg) != 0)
612 rte_exit(EXIT_FAILURE,
613 "Cannot open logfile\n");
615 if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
617 uint8_t c, peer_addr[6];
620 n = strtoul(optarg, &port_end, 10);
621 if (errno != 0 || port_end == optarg || *port_end++ != ',')
622 rte_exit(EXIT_FAILURE,
623 "Invalid eth-peer: %s", optarg);
624 if (n >= RTE_MAX_ETHPORTS)
625 rte_exit(EXIT_FAILURE,
626 "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
627 n, RTE_MAX_ETHPORTS);
629 if (cmdline_parse_etheraddr(NULL, port_end,
630 &peer_addr, sizeof(peer_addr)) < 0)
631 rte_exit(EXIT_FAILURE,
632 "Invalid ethernet address: %s\n",
634 for (c = 0; c < 6; c++)
635 peer_eth_addrs[n].addr_bytes[c] =
640 if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
642 if (n > 0 && n <= nb_ports)
643 nb_fwd_ports = (uint8_t) n;
645 rte_exit(EXIT_FAILURE,
646 "Invalid port %d\n", n);
648 if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
650 if (n > 0 && n <= nb_lcores)
651 nb_fwd_lcores = (uint8_t) n;
653 rte_exit(EXIT_FAILURE,
654 "nb-cores should be > 0 and <= %d\n",
657 if (!strcmp(lgopts[opt_idx].name, "coremask"))
658 parse_fwd_coremask(optarg);
659 if (!strcmp(lgopts[opt_idx].name, "portmask"))
660 parse_fwd_portmask(optarg);
661 if (!strcmp(lgopts[opt_idx].name, "numa")) {
663 memset(port_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
664 memset(rxring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
665 memset(txring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
667 if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
670 if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
671 if (parse_portnuma_config(optarg))
672 rte_exit(EXIT_FAILURE,
673 "invalid port-numa configuration\n");
675 if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
676 if (parse_ringnuma_config(optarg))
677 rte_exit(EXIT_FAILURE,
678 "invalid ring-numa configuration\n");
679 if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
681 if((uint8_t)n < max_socket)
682 socket_num = (uint8_t)n;
684 rte_exit(EXIT_FAILURE,
685 "The socket number should be < %d\n",
688 if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
690 if (n > 0 && n <= 0xFFFF)
691 mbuf_data_size = (uint16_t) n;
693 rte_exit(EXIT_FAILURE,
694 "mbuf-size should be > 0 and < 65536\n");
696 if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
699 param_total_num_mbufs = (unsigned)n;
701 rte_exit(EXIT_FAILURE,
702 "total-num-mbufs should be > 1024\n");
704 if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
706 if (n >= ETHER_MIN_LEN) {
707 rx_mode.max_rx_pkt_len = (uint32_t) n;
708 if (n > ETHER_MAX_LEN)
709 rx_mode.jumbo_frame = 1;
711 rte_exit(EXIT_FAILURE,
712 "Invalid max-pkt-len=%d - should be > %d\n",
715 if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
716 if (!strcmp(optarg, "signature"))
718 RTE_FDIR_MODE_SIGNATURE;
719 else if (!strcmp(optarg, "perfect"))
720 fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
721 else if (!strcmp(optarg, "perfect-mac-vlan"))
722 fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
723 else if (!strcmp(optarg, "perfect-tunnel"))
724 fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
725 else if (!strcmp(optarg, "none"))
726 fdir_conf.mode = RTE_FDIR_MODE_NONE;
728 rte_exit(EXIT_FAILURE,
729 "pkt-mode-invalid %s invalid - must be: "
730 "none, signature, perfect, perfect-mac-vlan"
731 " or perfect-tunnel\n",
734 if (!strcmp(lgopts[opt_idx].name,
735 "pkt-filter-report-hash")) {
736 if (!strcmp(optarg, "none"))
738 RTE_FDIR_NO_REPORT_STATUS;
739 else if (!strcmp(optarg, "match"))
741 RTE_FDIR_REPORT_STATUS;
742 else if (!strcmp(optarg, "always"))
744 RTE_FDIR_REPORT_STATUS_ALWAYS;
746 rte_exit(EXIT_FAILURE,
747 "pkt-filter-report-hash %s invalid "
748 "- must be: none or match or always\n",
751 if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
752 if (!strcmp(optarg, "64K"))
754 RTE_FDIR_PBALLOC_64K;
755 else if (!strcmp(optarg, "128K"))
757 RTE_FDIR_PBALLOC_128K;
758 else if (!strcmp(optarg, "256K"))
760 RTE_FDIR_PBALLOC_256K;
762 rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
763 " must be: 64K or 128K or 256K\n",
766 if (!strcmp(lgopts[opt_idx].name,
767 "pkt-filter-drop-queue")) {
770 fdir_conf.drop_queue = (uint8_t) n;
772 rte_exit(EXIT_FAILURE,
773 "drop queue %d invalid - must"
776 #ifdef RTE_LIBRTE_LATENCY_STATS
777 if (!strcmp(lgopts[opt_idx].name,
781 latencystats_lcore_id = (lcoreid_t) n;
782 latencystats_enabled = 1;
784 rte_exit(EXIT_FAILURE,
785 "invalid lcore id %d for latencystats"
786 " must be >= 0\n", n);
789 if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
790 rx_mode.hw_strip_crc = 0;
791 if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
792 rx_mode.enable_lro = 1;
793 if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
794 rx_mode.enable_scatter = 1;
795 if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
796 rx_mode.hw_ip_checksum = 1;
798 if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan")) {
799 rx_mode.hw_vlan_filter = 0;
800 rx_mode.hw_vlan_strip = 0;
801 rx_mode.hw_vlan_extend = 0;
804 if (!strcmp(lgopts[opt_idx].name,
805 "disable-hw-vlan-filter"))
806 rx_mode.hw_vlan_filter = 0;
808 if (!strcmp(lgopts[opt_idx].name,
809 "disable-hw-vlan-strip"))
810 rx_mode.hw_vlan_strip = 0;
812 if (!strcmp(lgopts[opt_idx].name,
813 "disable-hw-vlan-extend"))
814 rx_mode.hw_vlan_extend = 0;
816 if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
819 if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
821 if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
822 if (!strcmp(optarg, "paired"))
823 port_topology = PORT_TOPOLOGY_PAIRED;
824 else if (!strcmp(optarg, "chained"))
825 port_topology = PORT_TOPOLOGY_CHAINED;
826 else if (!strcmp(optarg, "loop"))
827 port_topology = PORT_TOPOLOGY_LOOP;
829 rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
830 " must be: paired or chained \n",
833 if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
834 set_pkt_forwarding_mode(optarg);
835 if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
837 if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
838 rss_hf = ETH_RSS_UDP;
839 if (!strcmp(lgopts[opt_idx].name, "rxq")) {
841 if (n >= 0 && n <= (int) MAX_QUEUE_ID)
842 nb_rxq = (queueid_t) n;
844 rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
845 " >= 0 && <= %d\n", n,
848 if (!strcmp(lgopts[opt_idx].name, "txq")) {
850 if (n >= 0 && n <= (int) MAX_QUEUE_ID)
851 nb_txq = (queueid_t) n;
853 rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
854 " >= 0 && <= %d\n", n,
857 if (!nb_rxq && !nb_txq) {
858 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
861 if (!strcmp(lgopts[opt_idx].name, "burst")) {
863 if ((n >= 1) && (n <= MAX_PKT_BURST))
864 nb_pkt_per_burst = (uint16_t) n;
866 rte_exit(EXIT_FAILURE,
867 "burst must >= 1 and <= %d]",
870 if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
873 (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
874 mb_mempool_cache = (uint16_t) n;
876 rte_exit(EXIT_FAILURE,
877 "mbcache must be >= 0 and <= %d\n",
878 RTE_MEMPOOL_CACHE_MAX_SIZE);
880 if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
883 tx_free_thresh = (int16_t)n;
885 rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
887 if (!strcmp(lgopts[opt_idx].name, "txrst")) {
890 tx_rs_thresh = (int16_t)n;
892 rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
894 if (!strcmp(lgopts[opt_idx].name, "txqflags")) {
896 n = strtoul(optarg, &end, 16);
898 txq_flags = (int32_t)n;
900 rte_exit(EXIT_FAILURE,
901 "txqflags must be >= 0\n");
903 if (!strcmp(lgopts[opt_idx].name, "rxd")) {
906 if (rx_free_thresh >= n)
907 rte_exit(EXIT_FAILURE,
909 "rx_free_thresh(%d)\n",
910 (int)rx_free_thresh);
912 nb_rxd = (uint16_t) n;
914 rte_exit(EXIT_FAILURE,
915 "rxd(%d) invalid - must be > 0\n",
918 if (!strcmp(lgopts[opt_idx].name, "txd")) {
921 nb_txd = (uint16_t) n;
923 rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
925 if (!strcmp(lgopts[opt_idx].name, "txpt")) {
928 tx_pthresh = (int8_t)n;
930 rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
932 if (!strcmp(lgopts[opt_idx].name, "txht")) {
935 tx_hthresh = (int8_t)n;
937 rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
939 if (!strcmp(lgopts[opt_idx].name, "txwt")) {
942 tx_wthresh = (int8_t)n;
944 rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
946 if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
949 rx_pthresh = (int8_t)n;
951 rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
953 if (!strcmp(lgopts[opt_idx].name, "rxht")) {
956 rx_hthresh = (int8_t)n;
958 rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
960 if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
963 rx_wthresh = (int8_t)n;
965 rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
967 if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
970 rx_free_thresh = (int16_t)n;
972 rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
974 if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
975 if (parse_queue_stats_mapping_config(optarg, TX)) {
976 rte_exit(EXIT_FAILURE,
977 "invalid TX queue statistics mapping config entered\n");
980 if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
981 if (parse_queue_stats_mapping_config(optarg, RX)) {
982 rte_exit(EXIT_FAILURE,
983 "invalid RX queue statistics mapping config entered\n");
986 if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
987 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
988 unsigned int nb_segs;
990 nb_segs = parse_item_list(optarg, "txpkt segments",
991 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
993 set_tx_pkt_segments(seg_lengths, nb_segs);
995 rte_exit(EXIT_FAILURE, "bad txpkts\n");
997 if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
999 if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1005 rte_exit(EXIT_SUCCESS, "Displayed help\n");
1009 rte_exit(EXIT_FAILURE,
1010 "Command line is incomplete or incorrect\n");