1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2010-2017 Intel Corporation
14 #include <sys/types.h>
16 #include <sys/queue.h>
23 #include <rte_common.h>
24 #include <rte_byteorder.h>
26 #include <rte_debug.h>
27 #include <rte_cycles.h>
28 #include <rte_memory.h>
29 #include <rte_launch.h>
31 #include <rte_per_lcore.h>
32 #include <rte_lcore.h>
33 #include <rte_atomic.h>
34 #include <rte_branch_prediction.h>
35 #include <rte_mempool.h>
36 #include <rte_interrupts.h>
38 #include <rte_ether.h>
39 #include <rte_ethdev.h>
40 #include <rte_string_fns.h>
41 #ifdef RTE_LIBRTE_CMDLINE
42 #include <cmdline_parse.h>
43 #include <cmdline_parse_etheraddr.h>
45 #ifdef RTE_LIBRTE_PMD_BOND
46 #include <rte_eth_bond.h>
56 #ifdef RTE_LIBRTE_CMDLINE
58 "[--cmdline-file=FILENAME] "
60 "[--help|-h] | [--auto-start|-a] | ["
61 "--tx-first | --stats-period=PERIOD | "
62 "--coremask=COREMASK --portmask=PORTMASK --numa "
63 "--mbuf-size= | --total-num-mbufs= | "
64 "--nb-cores= | --nb-ports= | "
65 #ifdef RTE_LIBRTE_CMDLINE
66 "--eth-peers-configfile= | "
67 "--eth-peer=X,M:M:M:M:M:M | "
69 "--pkt-filter-mode= |"
70 "--rss-ip | --rss-udp | "
71 "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
72 "--txpt= | --txht= | --txwt= | --txfreet= | "
73 "--txrst= | --tx-offloads= | --vxlan-gpe-port= ]\n",
75 #ifdef RTE_LIBRTE_CMDLINE
76 printf(" --interactive: run in interactive mode.\n");
77 printf(" --cmdline-file: execute cli commands before startup.\n");
79 printf(" --auto-start: start forwarding on init "
80 "[always when non-interactive].\n");
81 printf(" --help: display this message and quit.\n");
82 printf(" --tx-first: start forwarding sending a burst first "
83 "(only if interactive is disabled).\n");
84 printf(" --stats-period=PERIOD: statistics will be shown "
85 "every PERIOD seconds (only if interactive is disabled).\n");
86 printf(" --nb-cores=N: set the number of forwarding cores "
87 "(1 <= N <= %d).\n", nb_lcores);
88 printf(" --nb-ports=N: set the number of forwarding ports "
89 "(1 <= N <= %d).\n", nb_ports);
90 printf(" --coremask=COREMASK: hexadecimal bitmask of cores running "
91 "the packet forwarding test. The master lcore is reserved for "
92 "command line parsing only, and cannot be masked on for "
93 "packet forwarding.\n");
94 printf(" --portmask=PORTMASK: hexadecimal bitmask of ports used "
95 "by the packet forwarding test.\n");
96 printf(" --numa: enable NUMA-aware allocation of RX/TX rings and of "
97 "RX memory buffers (mbufs).\n");
98 printf(" --port-numa-config=(port,socket)[,(port,socket)]: "
99 "specify the socket on which the memory pool "
100 "used by the port will be allocated.\n");
101 printf(" --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
102 "specify the socket on which the TX/RX rings for "
103 "the port will be allocated "
104 "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
105 printf(" --socket-num=N: set socket from which all memory is allocated "
107 printf(" --mbuf-size=N: set the data size of mbuf to N bytes.\n");
108 printf(" --total-num-mbufs=N: set the number of mbufs to be allocated "
110 printf(" --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
111 #ifdef RTE_LIBRTE_CMDLINE
112 printf(" --eth-peers-configfile=name: config file with ethernet addresses "
114 printf(" --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
115 "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
117 printf(" --pkt-filter-mode=N: set Flow Director mode "
118 "(N: none (default mode) or signature or perfect).\n");
119 printf(" --pkt-filter-report-hash=N: set Flow Director report mode "
120 "(N: none or match (default) or always).\n");
121 printf(" --pkt-filter-size=N: set Flow Director mode "
122 "(N: 64K (default mode) or 128K or 256K).\n");
123 printf(" --pkt-filter-drop-queue=N: set drop-queue. "
124 "In perfect mode, when you add a rule with queue = -1 "
125 "the packet will be enqueued into the rx drop-queue. "
126 "If the drop-queue doesn't exist, the packet is dropped. "
127 "By default drop-queue=127.\n");
128 #ifdef RTE_LIBRTE_LATENCY_STATS
129 printf(" --latencystats=N: enable latency and jitter statistcs "
130 "monitoring on forwarding lcore id N.\n");
132 printf(" --disable-crc-strip: disable CRC stripping by hardware.\n");
133 printf(" --enable-lro: enable large receive offload.\n");
134 printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n");
135 printf(" --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
136 printf(" --enable-hw-vlan: enable hardware vlan.\n");
137 printf(" --enable-hw-vlan-filter: enable hardware vlan filter.\n");
138 printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
139 printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
140 printf(" --enable-drop-en: enable per queue packet drop.\n");
141 printf(" --disable-rss: disable rss.\n");
142 printf(" --port-topology=N: set port topology (N: paired (default) or "
144 printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
145 list_pkt_forwarding_modes());
146 printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
147 printf(" --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
148 printf(" --rxq=N: set the number of RX queues per port to N.\n");
149 printf(" --rxd=N: set the number of descriptors in RX rings to N.\n");
150 printf(" --txq=N: set the number of TX queues per port to N.\n");
151 printf(" --txd=N: set the number of descriptors in TX rings to N.\n");
152 printf(" --burst=N: set the number of packets per burst to N.\n");
153 printf(" --mbcache=N: set the cache of mbuf memory pool to N.\n");
154 printf(" --rxpt=N: set prefetch threshold register of RX rings to N.\n");
155 printf(" --rxht=N: set the host threshold register of RX rings to N.\n");
156 printf(" --rxfreet=N: set the free threshold of RX descriptors to N "
157 "(0 <= N < value of rxd).\n");
158 printf(" --rxwt=N: set the write-back threshold register of RX rings to N.\n");
159 printf(" --txpt=N: set the prefetch threshold register of TX rings to N.\n");
160 printf(" --txht=N: set the nhost threshold register of TX rings to N.\n");
161 printf(" --txwt=N: set the write-back threshold register of TX rings to N.\n");
162 printf(" --txfreet=N: set the transmit free threshold of TX rings to N "
163 "(0 <= N <= value of txd).\n");
164 printf(" --txrst=N: set the transmit RS bit threshold of TX rings to N "
165 "(0 <= N <= value of txd).\n");
166 printf(" --tx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
167 "tx queues statistics counters mapping "
168 "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
169 printf(" --rx-queue-stats-mapping=(port,queue,mapping)[,(port,queue,mapping]: "
170 "rx queues statistics counters mapping "
171 "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
172 printf(" --no-flush-rx: Don't flush RX streams before forwarding."
173 " Used mainly with PCAP drivers.\n");
174 printf(" --txpkts=X[,Y]*: set TX segment sizes"
175 " or total packet length.\n");
176 printf(" --disable-link-check: disable check on link status when "
177 "starting/stopping ports.\n");
178 printf(" --no-lsc-interrupt: disable link status change interrupt.\n");
179 printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
180 printf(" --bitrate-stats=N: set the logical core N to perform "
181 "bit-rate calculation.\n");
182 printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
183 "enable print of designated event or all of them.\n");
184 printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
185 "disable print of designated event or all of them.\n");
186 printf(" --flow-isolate-all: "
187 "requests flow API isolated mode on all ports at initialization time.\n");
188 printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
189 printf(" --hot-plug: enable hot plug for device.\n");
190 printf(" --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
191 printf(" --mlockall: lock all memory\n");
192 printf(" --no-mlockall: do not lock all memory\n");
195 #ifdef RTE_LIBRTE_CMDLINE
197 init_peer_eth_addrs(char *config_filename)
203 config_file = fopen(config_filename, "r");
204 if (config_file == NULL) {
205 perror("Failed to open eth config file\n");
209 for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
211 if (fgets(buf, sizeof(buf), config_file) == NULL)
214 if (cmdline_parse_etheraddr(NULL, buf, &peer_eth_addrs[i],
215 sizeof(peer_eth_addrs[i])) < 0) {
216 printf("Bad MAC address format on line %d\n", i+1);
222 nb_peer_eth_addrs = (portid_t) i;
228 * Parse the coremask given as argument (hexadecimal string) and set
229 * the global configuration of forwarding cores.
232 parse_fwd_coremask(const char *coremask)
235 unsigned long long int cm;
237 /* parse hexadecimal string */
239 cm = strtoull(coremask, &end, 16);
240 if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
241 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
242 else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
243 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
247 * Parse the coremask given as argument (hexadecimal string) and set
248 * the global configuration of forwarding cores.
251 parse_fwd_portmask(const char *portmask)
254 unsigned long long int pm;
256 /* parse hexadecimal string */
258 pm = strtoull(portmask, &end, 16);
259 if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
260 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
262 set_fwd_ports_mask((uint64_t) pm);
267 parse_queue_stats_mapping_config(const char *q_arg, int is_rx)
270 const char *p, *p0 = q_arg;
278 unsigned long int_fld[_NUM_FLD];
279 char *str_fld[_NUM_FLD];
283 /* reset from value set at definition */
284 is_rx ? (nb_rx_queue_stats_mappings = 0) : (nb_tx_queue_stats_mappings = 0);
286 while ((p = strchr(p0,'(')) != NULL) {
288 if((p0 = strchr(p,')')) == NULL)
292 if(size >= sizeof(s))
295 snprintf(s, sizeof(s), "%.*s", size, p);
296 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
298 for (i = 0; i < _NUM_FLD; i++){
300 int_fld[i] = strtoul(str_fld[i], &end, 0);
301 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
304 /* Check mapping field is in correct range (0..RTE_ETHDEV_QUEUE_STAT_CNTRS-1) */
305 if (int_fld[FLD_STATS_COUNTER] >= RTE_ETHDEV_QUEUE_STAT_CNTRS) {
306 printf("Stats counter not in the correct range 0..%d\n",
307 RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
312 if ((nb_tx_queue_stats_mappings >=
313 MAX_TX_QUEUE_STATS_MAPPINGS)) {
314 printf("exceeded max number of TX queue "
315 "statistics mappings: %hu\n",
316 nb_tx_queue_stats_mappings);
319 tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].port_id =
320 (uint8_t)int_fld[FLD_PORT];
321 tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].queue_id =
322 (uint8_t)int_fld[FLD_QUEUE];
323 tx_queue_stats_mappings_array[nb_tx_queue_stats_mappings].stats_counter_id =
324 (uint8_t)int_fld[FLD_STATS_COUNTER];
325 ++nb_tx_queue_stats_mappings;
328 if ((nb_rx_queue_stats_mappings >=
329 MAX_RX_QUEUE_STATS_MAPPINGS)) {
330 printf("exceeded max number of RX queue "
331 "statistics mappings: %hu\n",
332 nb_rx_queue_stats_mappings);
335 rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].port_id =
336 (uint8_t)int_fld[FLD_PORT];
337 rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].queue_id =
338 (uint8_t)int_fld[FLD_QUEUE];
339 rx_queue_stats_mappings_array[nb_rx_queue_stats_mappings].stats_counter_id =
340 (uint8_t)int_fld[FLD_STATS_COUNTER];
341 ++nb_rx_queue_stats_mappings;
345 /* Reassign the rx/tx_queue_stats_mappings pointer to point to this newly populated array rather */
346 /* than to the default array (that was set at its definition) */
347 is_rx ? (rx_queue_stats_mappings = rx_queue_stats_mappings_array) :
348 (tx_queue_stats_mappings = tx_queue_stats_mappings_array);
353 print_invalid_socket_id_error(void)
357 printf("Invalid socket id, options are: ");
358 for (i = 0; i < num_sockets; i++) {
359 printf("%u%s", socket_ids[i],
360 (i == num_sockets - 1) ? "\n" : ",");
365 parse_portnuma_config(const char *q_arg)
368 const char *p, *p0 = q_arg;
370 uint8_t i, socket_id;
378 unsigned long int_fld[_NUM_FLD];
379 char *str_fld[_NUM_FLD];
382 /* reset from value set at definition */
383 while ((p = strchr(p0,'(')) != NULL) {
385 if((p0 = strchr(p,')')) == NULL)
389 if(size >= sizeof(s))
392 snprintf(s, sizeof(s), "%.*s", size, p);
393 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
395 for (i = 0; i < _NUM_FLD; i++) {
397 int_fld[i] = strtoul(str_fld[i], &end, 0);
398 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
401 port_id = (portid_t)int_fld[FLD_PORT];
402 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
403 port_id == (portid_t)RTE_PORT_ALL) {
404 printf("Valid port range is [0");
405 RTE_ETH_FOREACH_DEV(pid)
410 socket_id = (uint8_t)int_fld[FLD_SOCKET];
411 if (new_socket_id(socket_id)) {
412 print_invalid_socket_id_error();
415 port_numa[port_id] = socket_id;
422 parse_ringnuma_config(const char *q_arg)
425 const char *p, *p0 = q_arg;
427 uint8_t i, ring_flag, socket_id;
436 unsigned long int_fld[_NUM_FLD];
437 char *str_fld[_NUM_FLD];
439 #define RX_RING_ONLY 0x1
440 #define TX_RING_ONLY 0x2
441 #define RXTX_RING 0x3
443 /* reset from value set at definition */
444 while ((p = strchr(p0,'(')) != NULL) {
446 if((p0 = strchr(p,')')) == NULL)
450 if(size >= sizeof(s))
453 snprintf(s, sizeof(s), "%.*s", size, p);
454 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
456 for (i = 0; i < _NUM_FLD; i++) {
458 int_fld[i] = strtoul(str_fld[i], &end, 0);
459 if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
462 port_id = (portid_t)int_fld[FLD_PORT];
463 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
464 port_id == (portid_t)RTE_PORT_ALL) {
465 printf("Valid port range is [0");
466 RTE_ETH_FOREACH_DEV(pid)
471 socket_id = (uint8_t)int_fld[FLD_SOCKET];
472 if (new_socket_id(socket_id)) {
473 print_invalid_socket_id_error();
476 ring_flag = (uint8_t)int_fld[FLD_FLAG];
477 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
478 printf("Invalid ring-flag=%d config for port =%d\n",
483 switch (ring_flag & RXTX_RING) {
485 rxring_numa[port_id] = socket_id;
488 txring_numa[port_id] = socket_id;
491 rxring_numa[port_id] = socket_id;
492 txring_numa[port_id] = socket_id;
495 printf("Invalid ring-flag=%d config for port=%d\n",
505 parse_event_printing_config(const char *optarg, int enable)
509 if (!strcmp(optarg, "unknown"))
510 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
511 else if (!strcmp(optarg, "intr_lsc"))
512 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
513 else if (!strcmp(optarg, "queue_state"))
514 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
515 else if (!strcmp(optarg, "intr_reset"))
516 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
517 else if (!strcmp(optarg, "vf_mbox"))
518 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
519 else if (!strcmp(optarg, "ipsec"))
520 mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
521 else if (!strcmp(optarg, "macsec"))
522 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
523 else if (!strcmp(optarg, "intr_rmv"))
524 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
525 else if (!strcmp(optarg, "dev_probed"))
526 mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
527 else if (!strcmp(optarg, "dev_released"))
528 mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
529 else if (!strcmp(optarg, "all"))
532 fprintf(stderr, "Invalid event: %s\n", optarg);
536 event_print_mask |= mask;
538 event_print_mask &= ~mask;
543 launch_args_parse(int argc, char** argv)
550 /* Default offloads for all ports. */
551 uint64_t rx_offloads = rx_mode.offloads;
552 uint64_t tx_offloads = tx_mode.offloads;
553 struct rte_eth_dev_info dev_info;
554 uint16_t rec_nb_pkts;
556 static struct option lgopts[] = {
558 #ifdef RTE_LIBRTE_CMDLINE
559 { "interactive", 0, 0, 0 },
560 { "cmdline-file", 1, 0, 0 },
561 { "auto-start", 0, 0, 0 },
562 { "eth-peers-configfile", 1, 0, 0 },
563 { "eth-peer", 1, 0, 0 },
565 { "tx-first", 0, 0, 0 },
566 { "stats-period", 1, 0, 0 },
567 { "ports", 1, 0, 0 },
568 { "nb-cores", 1, 0, 0 },
569 { "nb-ports", 1, 0, 0 },
570 { "coremask", 1, 0, 0 },
571 { "portmask", 1, 0, 0 },
573 { "no-numa", 0, 0, 0 },
574 { "mp-anon", 0, 0, 0 },
575 { "port-numa-config", 1, 0, 0 },
576 { "ring-numa-config", 1, 0, 0 },
577 { "socket-num", 1, 0, 0 },
578 { "mbuf-size", 1, 0, 0 },
579 { "total-num-mbufs", 1, 0, 0 },
580 { "max-pkt-len", 1, 0, 0 },
581 { "pkt-filter-mode", 1, 0, 0 },
582 { "pkt-filter-report-hash", 1, 0, 0 },
583 { "pkt-filter-size", 1, 0, 0 },
584 { "pkt-filter-drop-queue", 1, 0, 0 },
585 #ifdef RTE_LIBRTE_LATENCY_STATS
586 { "latencystats", 1, 0, 0 },
588 #ifdef RTE_LIBRTE_BITRATE
589 { "bitrate-stats", 1, 0, 0 },
591 { "disable-crc-strip", 0, 0, 0 },
592 { "enable-lro", 0, 0, 0 },
593 { "enable-rx-cksum", 0, 0, 0 },
594 { "enable-rx-timestamp", 0, 0, 0 },
595 { "enable-scatter", 0, 0, 0 },
596 { "enable-hw-vlan", 0, 0, 0 },
597 { "enable-hw-vlan-filter", 0, 0, 0 },
598 { "enable-hw-vlan-strip", 0, 0, 0 },
599 { "enable-hw-vlan-extend", 0, 0, 0 },
600 { "enable-drop-en", 0, 0, 0 },
601 { "disable-rss", 0, 0, 0 },
602 { "port-topology", 1, 0, 0 },
603 { "forward-mode", 1, 0, 0 },
604 { "rss-ip", 0, 0, 0 },
605 { "rss-udp", 0, 0, 0 },
610 { "burst", 1, 0, 0 },
611 { "mbcache", 1, 0, 0 },
615 { "txfreet", 1, 0, 0 },
616 { "txrst", 1, 0, 0 },
620 { "rxfreet", 1, 0, 0 },
621 { "tx-queue-stats-mapping", 1, 0, 0 },
622 { "rx-queue-stats-mapping", 1, 0, 0 },
623 { "no-flush-rx", 0, 0, 0 },
624 { "flow-isolate-all", 0, 0, 0 },
625 { "txpkts", 1, 0, 0 },
626 { "disable-link-check", 0, 0, 0 },
627 { "no-lsc-interrupt", 0, 0, 0 },
628 { "no-rmv-interrupt", 0, 0, 0 },
629 { "print-event", 1, 0, 0 },
630 { "mask-event", 1, 0, 0 },
631 { "tx-offloads", 1, 0, 0 },
632 { "hot-plug", 0, 0, 0 },
633 { "vxlan-gpe-port", 1, 0, 0 },
634 { "mlockall", 0, 0, 0 },
635 { "no-mlockall", 0, 0, 0 },
641 #ifdef RTE_LIBRTE_CMDLINE
642 #define SHORTOPTS "i"
646 while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
647 lgopts, &opt_idx)) != EOF) {
649 #ifdef RTE_LIBRTE_CMDLINE
651 printf("Interactive-mode selected\n");
656 printf("Auto-start selected\n");
660 case 0: /*long options */
661 if (!strcmp(lgopts[opt_idx].name, "help")) {
663 rte_exit(EXIT_SUCCESS, "Displayed help\n");
665 #ifdef RTE_LIBRTE_CMDLINE
666 if (!strcmp(lgopts[opt_idx].name, "interactive")) {
667 printf("Interactive-mode selected\n");
670 if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
671 printf("CLI commands to be read from %s\n",
673 strlcpy(cmdline_filename, optarg,
674 sizeof(cmdline_filename));
676 if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
677 printf("Auto-start selected\n");
680 if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
681 printf("Ports to start sending a burst of "
685 if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
689 n = strtoul(optarg, &end, 10);
690 if ((optarg[0] == '\0') || (end == NULL) ||
697 if (!strcmp(lgopts[opt_idx].name,
698 "eth-peers-configfile")) {
699 if (init_peer_eth_addrs(optarg) != 0)
700 rte_exit(EXIT_FAILURE,
701 "Cannot open logfile\n");
703 if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
705 uint8_t c, peer_addr[6];
708 n = strtoul(optarg, &port_end, 10);
709 if (errno != 0 || port_end == optarg || *port_end++ != ',')
710 rte_exit(EXIT_FAILURE,
711 "Invalid eth-peer: %s", optarg);
712 if (n >= RTE_MAX_ETHPORTS)
713 rte_exit(EXIT_FAILURE,
714 "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
715 n, RTE_MAX_ETHPORTS);
717 if (cmdline_parse_etheraddr(NULL, port_end,
718 &peer_addr, sizeof(peer_addr)) < 0)
719 rte_exit(EXIT_FAILURE,
720 "Invalid ethernet address: %s\n",
722 for (c = 0; c < 6; c++)
723 peer_eth_addrs[n].addr_bytes[c] =
728 if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
730 if (n > 0 && n <= nb_ports)
733 rte_exit(EXIT_FAILURE,
734 "Invalid port %d\n", n);
736 if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
738 if (n > 0 && n <= nb_lcores)
739 nb_fwd_lcores = (uint8_t) n;
741 rte_exit(EXIT_FAILURE,
742 "nb-cores should be > 0 and <= %d\n",
745 if (!strcmp(lgopts[opt_idx].name, "coremask"))
746 parse_fwd_coremask(optarg);
747 if (!strcmp(lgopts[opt_idx].name, "portmask"))
748 parse_fwd_portmask(optarg);
749 if (!strcmp(lgopts[opt_idx].name, "no-numa"))
751 if (!strcmp(lgopts[opt_idx].name, "numa"))
753 if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
756 if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
757 if (parse_portnuma_config(optarg))
758 rte_exit(EXIT_FAILURE,
759 "invalid port-numa configuration\n");
761 if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
762 if (parse_ringnuma_config(optarg))
763 rte_exit(EXIT_FAILURE,
764 "invalid ring-numa configuration\n");
765 if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
767 if (!new_socket_id((uint8_t)n)) {
768 socket_num = (uint8_t)n;
770 print_invalid_socket_id_error();
771 rte_exit(EXIT_FAILURE,
772 "Invalid socket id");
775 if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
777 if (n > 0 && n <= 0xFFFF)
778 mbuf_data_size = (uint16_t) n;
780 rte_exit(EXIT_FAILURE,
781 "mbuf-size should be > 0 and < 65536\n");
783 if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
786 param_total_num_mbufs = (unsigned)n;
788 rte_exit(EXIT_FAILURE,
789 "total-num-mbufs should be > 1024\n");
791 if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
793 if (n >= ETHER_MIN_LEN) {
794 rx_mode.max_rx_pkt_len = (uint32_t) n;
795 if (n > ETHER_MAX_LEN)
797 DEV_RX_OFFLOAD_JUMBO_FRAME;
799 rte_exit(EXIT_FAILURE,
800 "Invalid max-pkt-len=%d - should be > %d\n",
803 if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
804 if (!strcmp(optarg, "signature"))
806 RTE_FDIR_MODE_SIGNATURE;
807 else if (!strcmp(optarg, "perfect"))
808 fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
809 else if (!strcmp(optarg, "perfect-mac-vlan"))
810 fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
811 else if (!strcmp(optarg, "perfect-tunnel"))
812 fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
813 else if (!strcmp(optarg, "none"))
814 fdir_conf.mode = RTE_FDIR_MODE_NONE;
816 rte_exit(EXIT_FAILURE,
817 "pkt-mode-invalid %s invalid - must be: "
818 "none, signature, perfect, perfect-mac-vlan"
819 " or perfect-tunnel\n",
822 if (!strcmp(lgopts[opt_idx].name,
823 "pkt-filter-report-hash")) {
824 if (!strcmp(optarg, "none"))
826 RTE_FDIR_NO_REPORT_STATUS;
827 else if (!strcmp(optarg, "match"))
829 RTE_FDIR_REPORT_STATUS;
830 else if (!strcmp(optarg, "always"))
832 RTE_FDIR_REPORT_STATUS_ALWAYS;
834 rte_exit(EXIT_FAILURE,
835 "pkt-filter-report-hash %s invalid "
836 "- must be: none or match or always\n",
839 if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
840 if (!strcmp(optarg, "64K"))
842 RTE_FDIR_PBALLOC_64K;
843 else if (!strcmp(optarg, "128K"))
845 RTE_FDIR_PBALLOC_128K;
846 else if (!strcmp(optarg, "256K"))
848 RTE_FDIR_PBALLOC_256K;
850 rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
851 " must be: 64K or 128K or 256K\n",
854 if (!strcmp(lgopts[opt_idx].name,
855 "pkt-filter-drop-queue")) {
858 fdir_conf.drop_queue = (uint8_t) n;
860 rte_exit(EXIT_FAILURE,
861 "drop queue %d invalid - must"
864 #ifdef RTE_LIBRTE_LATENCY_STATS
865 if (!strcmp(lgopts[opt_idx].name,
869 latencystats_lcore_id = (lcoreid_t) n;
870 latencystats_enabled = 1;
872 rte_exit(EXIT_FAILURE,
873 "invalid lcore id %d for latencystats"
874 " must be >= 0\n", n);
877 #ifdef RTE_LIBRTE_BITRATE
878 if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
881 bitrate_lcore_id = (lcoreid_t) n;
884 rte_exit(EXIT_FAILURE,
885 "invalid lcore id %d for bitrate stats"
886 " must be >= 0\n", n);
889 if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
890 rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
891 if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
892 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
893 if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
894 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
895 if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
896 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
897 if (!strcmp(lgopts[opt_idx].name,
898 "enable-rx-timestamp"))
899 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
900 if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
901 rx_offloads |= DEV_RX_OFFLOAD_VLAN;
903 if (!strcmp(lgopts[opt_idx].name,
904 "enable-hw-vlan-filter"))
905 rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
907 if (!strcmp(lgopts[opt_idx].name,
908 "enable-hw-vlan-strip"))
909 rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
911 if (!strcmp(lgopts[opt_idx].name,
912 "enable-hw-vlan-extend"))
913 rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
915 if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
918 if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
920 if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
921 if (!strcmp(optarg, "paired"))
922 port_topology = PORT_TOPOLOGY_PAIRED;
923 else if (!strcmp(optarg, "chained"))
924 port_topology = PORT_TOPOLOGY_CHAINED;
925 else if (!strcmp(optarg, "loop"))
926 port_topology = PORT_TOPOLOGY_LOOP;
928 rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
929 " must be: paired, chained or loop\n",
932 if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
933 set_pkt_forwarding_mode(optarg);
934 if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
936 if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
937 rss_hf = ETH_RSS_UDP;
938 if (!strcmp(lgopts[opt_idx].name, "rxq")) {
940 if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
941 nb_rxq = (queueid_t) n;
943 rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
944 " >= 0 && <= %u\n", n,
945 get_allowed_max_nb_rxq(&pid));
947 if (!strcmp(lgopts[opt_idx].name, "txq")) {
949 if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
950 nb_txq = (queueid_t) n;
952 rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
953 " >= 0 && <= %u\n", n,
954 get_allowed_max_nb_txq(&pid));
956 if (!nb_rxq && !nb_txq) {
957 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
960 if (!strcmp(lgopts[opt_idx].name, "burst")) {
963 /* A burst size of zero means that the
964 * PMD should be queried for
965 * recommended Rx burst size. Since
966 * testpmd uses a single size for all
967 * ports, port 0 is queried for the
968 * value, on the assumption that all
969 * ports are of the same NIC model.
971 rte_eth_dev_info_get(0, &dev_info);
972 rec_nb_pkts = dev_info
973 .default_rxportconf.burst_size;
975 if (rec_nb_pkts == 0)
976 rte_exit(EXIT_FAILURE,
977 "PMD does not recommend a burst size. "
978 "Provided value must be between "
979 "1 and %d\n", MAX_PKT_BURST);
980 else if (rec_nb_pkts > MAX_PKT_BURST)
981 rte_exit(EXIT_FAILURE,
982 "PMD recommended burst size of %d"
983 " exceeds maximum value of %d\n",
984 rec_nb_pkts, MAX_PKT_BURST);
985 printf("Using PMD-provided burst value of %d\n",
987 nb_pkt_per_burst = rec_nb_pkts;
988 } else if (n > MAX_PKT_BURST)
989 rte_exit(EXIT_FAILURE,
990 "burst must be between1 and %d\n",
993 nb_pkt_per_burst = (uint16_t) n;
995 if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
998 (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
999 mb_mempool_cache = (uint16_t) n;
1001 rte_exit(EXIT_FAILURE,
1002 "mbcache must be >= 0 and <= %d\n",
1003 RTE_MEMPOOL_CACHE_MAX_SIZE);
1005 if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
1008 tx_free_thresh = (int16_t)n;
1010 rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
1012 if (!strcmp(lgopts[opt_idx].name, "txrst")) {
1015 tx_rs_thresh = (int16_t)n;
1017 rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
1019 if (!strcmp(lgopts[opt_idx].name, "rxd")) {
1022 if (rx_free_thresh >= n)
1023 rte_exit(EXIT_FAILURE,
1025 "rx_free_thresh(%d)\n",
1026 (int)rx_free_thresh);
1028 nb_rxd = (uint16_t) n;
1030 rte_exit(EXIT_FAILURE,
1031 "rxd(%d) invalid - must be > 0\n",
1034 if (!strcmp(lgopts[opt_idx].name, "txd")) {
1037 nb_txd = (uint16_t) n;
1039 rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
1041 if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1044 tx_pthresh = (int8_t)n;
1046 rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1048 if (!strcmp(lgopts[opt_idx].name, "txht")) {
1051 tx_hthresh = (int8_t)n;
1053 rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1055 if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1058 tx_wthresh = (int8_t)n;
1060 rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1062 if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1065 rx_pthresh = (int8_t)n;
1067 rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1069 if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1072 rx_hthresh = (int8_t)n;
1074 rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1076 if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1079 rx_wthresh = (int8_t)n;
1081 rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1083 if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1086 rx_free_thresh = (int16_t)n;
1088 rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1090 if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
1091 if (parse_queue_stats_mapping_config(optarg, TX)) {
1092 rte_exit(EXIT_FAILURE,
1093 "invalid TX queue statistics mapping config entered\n");
1096 if (!strcmp(lgopts[opt_idx].name, "rx-queue-stats-mapping")) {
1097 if (parse_queue_stats_mapping_config(optarg, RX)) {
1098 rte_exit(EXIT_FAILURE,
1099 "invalid RX queue statistics mapping config entered\n");
1102 if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1103 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1104 unsigned int nb_segs;
1106 nb_segs = parse_item_list(optarg, "txpkt segments",
1107 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1109 set_tx_pkt_segments(seg_lengths, nb_segs);
1111 rte_exit(EXIT_FAILURE, "bad txpkts\n");
1113 if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1115 if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1117 if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1119 if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1121 if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1122 flow_isolate_all = 1;
1123 if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1125 n = strtoull(optarg, &end, 16);
1127 tx_offloads = (uint64_t)n;
1129 rte_exit(EXIT_FAILURE,
1130 "tx-offloads must be >= 0\n");
1132 if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
1135 vxlan_gpe_udp_port = (uint16_t)n;
1137 rte_exit(EXIT_FAILURE,
1138 "vxlan-gpe-port must be >= 0\n");
1140 if (!strcmp(lgopts[opt_idx].name, "print-event"))
1141 if (parse_event_printing_config(optarg, 1)) {
1142 rte_exit(EXIT_FAILURE,
1143 "invalid print-event argument\n");
1145 if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1146 if (parse_event_printing_config(optarg, 0)) {
1147 rte_exit(EXIT_FAILURE,
1148 "invalid mask-event argument\n");
1150 if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
1152 if (!strcmp(lgopts[opt_idx].name, "mlockall"))
1154 if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
1159 rte_exit(EXIT_SUCCESS, "Displayed help\n");
1163 rte_exit(EXIT_FAILURE,
1164 "Command line is incomplete or incorrect\n");
1169 /* Set offload configuration from command line parameters. */
1170 rx_mode.offloads = rx_offloads;
1171 tx_mode.offloads = tx_offloads;