app/test-pmd/parameters.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2010-2017 Intel Corporation
   3  */
   4
   5 #include <errno.h>
   6 #include <getopt.h>
   7 #include <stdarg.h>
   8 #include <stdio.h>
   9 #include <stdlib.h>
  10 #include <signal.h>
  11 #include <string.h>
  12 #include <time.h>
  13 #include <fcntl.h>
  14 #include <sys/types.h>
  15
  16 #include <sys/queue.h>
  17 #include <sys/stat.h>
  18
  19 #include <stdint.h>
  20 #include <unistd.h>
  21 #include <inttypes.h>
  22 #include <arpa/inet.h>
  23
  24 #include <rte_common.h>
  25 #include <rte_byteorder.h>
  26 #include <rte_log.h>
  27 #include <rte_debug.h>
  28 #include <rte_cycles.h>
  29 #include <rte_memory.h>
  30 #include <rte_launch.h>
  31 #include <rte_eal.h>
  32 #include <rte_per_lcore.h>
  33 #include <rte_lcore.h>
  34 #include <rte_atomic.h>
  35 #include <rte_branch_prediction.h>
  36 #include <rte_mempool.h>
  37 #include <rte_interrupts.h>
  38 #include <rte_pci.h>
  39 #include <rte_ether.h>
  40 #include <rte_ethdev.h>
  41 #include <rte_string_fns.h>
  42 #ifdef RTE_NET_BOND
  43 #include <rte_eth_bond.h>
  44 #endif
  45 #include <rte_flow.h>
  46
  47 #include "testpmd.h"
  48
  49 static void
  50 usage(char* progname)
  51 {
  52         printf("\nUsage: %s [EAL options] -- [testpmd options]\n\n",
  53                progname);
  54 #ifdef RTE_LIB_CMDLINE
  55         printf("  --interactive: run in interactive mode.\n");
  56         printf("  --cmdline-file: execute cli commands before startup.\n");
  57 #endif
  58         printf("  --auto-start: start forwarding on init "
  59                "[always when non-interactive].\n");
  60         printf("  --help: display this message and quit.\n");
  61         printf("  --tx-first: start forwarding sending a burst first "
  62                "(only if interactive is disabled).\n");
  63         printf("  --stats-period=PERIOD: statistics will be shown "
  64                "every PERIOD seconds (only if interactive is disabled).\n");
  65         printf("  --nb-cores=N: set the number of forwarding cores "
  66                "(1 <= N <= %d).\n", nb_lcores);
  67         printf("  --nb-ports=N: set the number of forwarding ports "
  68                "(1 <= N <= %d).\n", nb_ports);
  69         printf("  --coremask=COREMASK: hexadecimal bitmask of cores running "
  70                "the packet forwarding test. The main lcore is reserved for "
  71                "command line parsing only, and cannot be masked on for "
  72                "packet forwarding.\n");
  73         printf("  --portmask=PORTMASK: hexadecimal bitmask of ports used "
  74                "by the packet forwarding test.\n");
  75         printf("  --portlist=PORTLIST: list of forwarding ports\n");
  76         printf("  --numa: enable NUMA-aware allocation of RX/TX rings and of "
  77                "RX memory buffers (mbufs).\n");
  78         printf("  --no-numa: disable NUMA-aware allocation.\n");
  79         printf("  --port-numa-config=(port,socket)[,(port,socket)]: "
  80                "specify the socket on which the memory pool "
  81                "used by the port will be allocated.\n");
  82         printf("  --ring-numa-config=(port,flag,socket)[,(port,flag,socket)]: "
  83                "specify the socket on which the TX/RX rings for "
  84                "the port will be allocated "
  85                "(flag: 1 for RX; 2 for TX; 3 for RX and TX).\n");
  86         printf("  --socket-num=N: set socket from which all memory is allocated "
  87                "in NUMA mode.\n");
  88         printf("  --mbuf-size=N,[N1[,..Nn]: set the data size of mbuf to "
  89                "N bytes. If multiple numbers are specified the extra pools "
  90                "will be created to receive with packet split features\n");
  91         printf("  --total-num-mbufs=N: set the number of mbufs to be allocated "
  92                "in mbuf pools.\n");
  93         printf("  --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
  94         printf("  --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
  95                "size to N bytes.\n");
  96 #ifdef RTE_LIB_CMDLINE
  97         printf("  --eth-peers-configfile=name: config file with ethernet addresses "
  98                "of peer ports.\n");
  99         printf("  --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
 100                "port (0 <= X < %d).\n", RTE_MAX_ETHPORTS);
 101 #endif
 102         printf("  --pkt-filter-mode=N: set Flow Director mode "
 103                "(N: none (default mode) or signature or perfect).\n");
 104         printf("  --pkt-filter-report-hash=N: set Flow Director report mode "
 105                "(N: none  or match (default) or always).\n");
 106         printf("  --pkt-filter-size=N: set Flow Director mode "
 107                "(N: 64K (default mode) or 128K or 256K).\n");
 108         printf("  --pkt-filter-drop-queue=N: set drop-queue. "
 109                "In perfect mode, when you add a rule with queue = -1 "
 110                "the packet will be enqueued into the rx drop-queue. "
 111                "If the drop-queue doesn't exist, the packet is dropped. "
 112                "By default drop-queue=127.\n");
 113 #ifdef RTE_LIB_LATENCYSTATS
 114         printf("  --latencystats=N: enable latency and jitter statistcs "
 115                "monitoring on forwarding lcore id N.\n");
 116 #endif
 117         printf("  --disable-crc-strip: disable CRC stripping by hardware.\n");
 118         printf("  --enable-scatter: enable scattered Rx.\n");
 119         printf("  --enable-lro: enable large receive offload.\n");
 120         printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 121         printf("  --enable-rx-timestamp: enable rx hardware timestamp offload.\n");
 122         printf("  --enable-hw-vlan: enable hardware vlan.\n");
 123         printf("  --enable-hw-vlan-filter: enable hardware vlan filter.\n");
 124         printf("  --enable-hw-vlan-strip: enable hardware vlan strip.\n");
 125         printf("  --enable-hw-vlan-extend: enable hardware vlan extend.\n");
 126         printf("  --enable-hw-qinq-strip: enable hardware qinq strip.\n");
 127         printf("  --enable-drop-en: enable per queue packet drop.\n");
 128         printf("  --disable-rss: disable rss.\n");
 129         printf("  --port-topology=<paired|chained|loop>: set port topology (paired "
 130                "is default).\n");
 131         printf("  --forward-mode=N: set forwarding mode (N: %s).\n",
 132                list_pkt_forwarding_modes());
 133         printf("  --forward-mode=5tswap: set forwarding mode to "
 134                         "swap L2,L3,L4 for MAC, IPv4/IPv6 and TCP/UDP only.\n");
 135         printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
 136         printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
 137         printf("  --rss-level-inner: set RSS hash level to innermost\n");
 138         printf("  --rss-level-outer: set RSS hash level to outermost\n");
 139         printf("  --rxq=N: set the number of RX queues per port to N.\n");
 140         printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
 141         printf("  --txq=N: set the number of TX queues per port to N.\n");
 142         printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
 143         printf("  --hairpinq=N: set the number of hairpin queues per port to "
 144                "N.\n");
 145         printf("  --burst=N: set the number of packets per burst to N.\n");
 146         printf("  --flowgen-clones=N: set the number of single packet clones to send in flowgen mode. Should be less than burst value.\n");
 147         printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
 148         printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
 149         printf("  --rxht=N: set the host threshold register of RX rings to N.\n");
 150         printf("  --rxfreet=N: set the free threshold of RX descriptors to N "
 151                "(0 <= N < value of rxd).\n");
 152         printf("  --rxwt=N: set the write-back threshold register of RX rings to N.\n");
 153         printf("  --txpt=N: set the prefetch threshold register of TX rings to N.\n");
 154         printf("  --txht=N: set the nhost threshold register of TX rings to N.\n");
 155         printf("  --txwt=N: set the write-back threshold register of TX rings to N.\n");
 156         printf("  --txfreet=N: set the transmit free threshold of TX rings to N "
 157                "(0 <= N <= value of txd).\n");
 158         printf("  --txrst=N: set the transmit RS bit threshold of TX rings to N "
 159                "(0 <= N <= value of txd).\n");
 160         printf("  --no-flush-rx: Don't flush RX streams before forwarding."
 161                " Used mainly with PCAP drivers.\n");
 162         printf("  --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
 163         printf("  --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
 164         printf("  --txpkts=X[,Y]*: set TX segment sizes"
 165                 " or total packet length.\n");
 166         printf("  --txonly-multi-flow: generate multiple flows in txonly mode\n");
 167         printf("  --tx-ip=src,dst: IP addresses in Tx-only mode\n");
 168         printf("  --tx-udp=src[,dst]: UDP ports in Tx-only mode\n");
 169         printf("  --eth-link-speed: force link speed.\n");
 170         printf("  --disable-link-check: disable check on link status when "
 171                "starting/stopping ports.\n");
 172         printf("  --disable-device-start: do not automatically start port\n");
 173         printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
 174         printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
 175         printf("  --bitrate-stats=N: set the logical core N to perform "
 176                 "bit-rate calculation.\n");
 177         printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 178                "enable print of designated event or all of them.\n");
 179         printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 180                "disable print of designated event or all of them.\n");
 181         printf("  --flow-isolate-all: "
 182                "requests flow API isolated mode on all ports at initialization time.\n");
 183         printf("  --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX queue offloads\n");
 184         printf("  --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
 185         printf("  --hot-plug: enable hot plug for device.\n");
 186         printf("  --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
 187         printf("  --geneve-parsed-port=N: UPD port to parse GENEVE tunnel protocol\n");
 188         printf("  --mlockall: lock all memory\n");
 189         printf("  --no-mlockall: do not lock all memory\n");
 190         printf("  --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
 191                "    native: use regular DPDK memory to create and populate mempool\n"
 192                "    anon: use regular DPDK memory to create and anonymous memory to populate mempool\n"
 193                "    xmem: use anonymous memory to create and populate mempool\n"
 194                "    xmemhuge: use anonymous hugepage memory to create and populate mempool\n");
 195         printf("  --noisy-tx-sw-buffer-size=N: size of FIFO buffer\n");
 196         printf("  --noisy-tx-sw-buffer-flushtime=N: flush FIFO after N ms\n");
 197         printf("  --noisy-lkup-memory=N: allocate N MB of VNF memory\n");
 198         printf("  --noisy-lkup-num-writes=N: do N random writes per packet\n");
 199         printf("  --noisy-lkup-num-reads=N: do N random reads per packet\n");
 200         printf("  --noisy-lkup-num-reads-writes=N: do N random reads and writes per packet\n");
 201         printf("  --no-iova-contig: mempool memory can be IOVA non contiguous. "
 202                "valid only with --mp-alloc=anon\n");
 203         printf("  --rx-mq-mode=0xX: hexadecimal bitmask of RX mq mode can be "
 204                "enabled\n");
 205         printf("  --record-core-cycles: enable measurement of CPU cycles.\n");
 206         printf("  --record-burst-stats: enable display of RX and TX bursts.\n");
 207         printf("  --hairpin-mode=0xXX: bitmask set the hairpin port mode.\n"
 208                "    0x10 - explicit Tx rule, 0x02 - hairpin ports paired\n"
 209                "    0x01 - hairpin ports loop, 0x00 - hairpin port self\n");
 210 }
 211
 212 #ifdef RTE_LIB_CMDLINE
 213 static int
 214 init_peer_eth_addrs(char *config_filename)
 215 {
 216         FILE *config_file;
 217         portid_t i;
 218         char buf[50];
 219
 220         config_file = fopen(config_filename, "r");
 221         if (config_file == NULL) {
 222                 perror("Failed to open eth config file\n");
 223                 return -1;
 224         }
 225
 226         for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
 227
 228                 if (fgets(buf, sizeof(buf), config_file) == NULL)
 229                         break;
 230
 231                 if (rte_ether_unformat_addr(buf, &peer_eth_addrs[i]) < 0) {
 232                         printf("Bad MAC address format on line %d\n", i+1);
 233                         fclose(config_file);
 234                         return -1;
 235                 }
 236         }
 237         fclose(config_file);
 238         nb_peer_eth_addrs = (portid_t) i;
 239         return 0;
 240 }
 241 #endif
 242
 243 /*
 244  * Parse the coremask given as argument (hexadecimal string) and set
 245  * the global configuration of forwarding cores.
 246  */
 247 static void
 248 parse_fwd_coremask(const char *coremask)
 249 {
 250         char *end;
 251         unsigned long long int cm;
 252
 253         /* parse hexadecimal string */
 254         end = NULL;
 255         cm = strtoull(coremask, &end, 16);
 256         if ((coremask[0] == '\0') || (end == NULL) || (*end != '\0'))
 257                 rte_exit(EXIT_FAILURE, "Invalid fwd core mask\n");
 258         else if (set_fwd_lcores_mask((uint64_t) cm) < 0)
 259                 rte_exit(EXIT_FAILURE, "coremask is not valid\n");
 260 }
 261
 262 /*
 263  * Parse the coremask given as argument (hexadecimal string) and set
 264  * the global configuration of forwarding cores.
 265  */
 266 static void
 267 parse_fwd_portmask(const char *portmask)
 268 {
 269         char *end;
 270         unsigned long long int pm;
 271
 272         /* parse hexadecimal string */
 273         end = NULL;
 274         pm = strtoull(portmask, &end, 16);
 275         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
 276                 rte_exit(EXIT_FAILURE, "Invalid fwd port mask\n");
 277         else
 278                 set_fwd_ports_mask((uint64_t) pm);
 279 }
 280
 281 static void
 282 print_invalid_socket_id_error(void)
 283 {
 284         unsigned int i = 0;
 285
 286         printf("Invalid socket id, options are: ");
 287         for (i = 0; i < num_sockets; i++) {
 288                 printf("%u%s", socket_ids[i],
 289                       (i == num_sockets - 1) ? "\n" : ",");
 290         }
 291 }
 292
 293 static int
 294 parse_portnuma_config(const char *q_arg)
 295 {
 296         char s[256];
 297         const char *p, *p0 = q_arg;
 298         char *end;
 299         uint8_t i, socket_id;
 300         portid_t port_id;
 301         unsigned size;
 302         enum fieldnames {
 303                 FLD_PORT = 0,
 304                 FLD_SOCKET,
 305                 _NUM_FLD
 306         };
 307         unsigned long int_fld[_NUM_FLD];
 308         char *str_fld[_NUM_FLD];
 309
 310         /* reset from value set at definition */
 311         while ((p = strchr(p0,'(')) != NULL) {
 312                 ++p;
 313                 if((p0 = strchr(p,')')) == NULL)
 314                         return -1;
 315
 316                 size = p0 - p;
 317                 if(size >= sizeof(s))
 318                         return -1;
 319
 320                 snprintf(s, sizeof(s), "%.*s", size, p);
 321                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 322                         return -1;
 323                 for (i = 0; i < _NUM_FLD; i++) {
 324                         errno = 0;
 325                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 326                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 327                                 return -1;
 328                 }
 329                 port_id = (portid_t)int_fld[FLD_PORT];
 330                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
 331                         port_id == (portid_t)RTE_PORT_ALL) {
 332                         print_valid_ports();
 333                         return -1;
 334                 }
 335                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
 336                 if (new_socket_id(socket_id)) {
 337                         if (num_sockets >= RTE_MAX_NUMA_NODES) {
 338                                 print_invalid_socket_id_error();
 339                                 return -1;
 340                         }
 341                         socket_ids[num_sockets++] = socket_id;
 342                 }
 343                 port_numa[port_id] = socket_id;
 344         }
 345
 346         return 0;
 347 }
 348
 349 static int
 350 parse_ringnuma_config(const char *q_arg)
 351 {
 352         char s[256];
 353         const char *p, *p0 = q_arg;
 354         char *end;
 355         uint8_t i, ring_flag, socket_id;
 356         portid_t port_id;
 357         unsigned size;
 358         enum fieldnames {
 359                 FLD_PORT = 0,
 360                 FLD_FLAG,
 361                 FLD_SOCKET,
 362                 _NUM_FLD
 363         };
 364         unsigned long int_fld[_NUM_FLD];
 365         char *str_fld[_NUM_FLD];
 366         #define RX_RING_ONLY 0x1
 367         #define TX_RING_ONLY 0x2
 368         #define RXTX_RING    0x3
 369
 370         /* reset from value set at definition */
 371         while ((p = strchr(p0,'(')) != NULL) {
 372                 ++p;
 373                 if((p0 = strchr(p,')')) == NULL)
 374                         return -1;
 375
 376                 size = p0 - p;
 377                 if(size >= sizeof(s))
 378                         return -1;
 379
 380                 snprintf(s, sizeof(s), "%.*s", size, p);
 381                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
 382                         return -1;
 383                 for (i = 0; i < _NUM_FLD; i++) {
 384                         errno = 0;
 385                         int_fld[i] = strtoul(str_fld[i], &end, 0);
 386                         if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
 387                                 return -1;
 388                 }
 389                 port_id = (portid_t)int_fld[FLD_PORT];
 390                 if (port_id_is_invalid(port_id, ENABLED_WARN) ||
 391                         port_id == (portid_t)RTE_PORT_ALL) {
 392                         print_valid_ports();
 393                         return -1;
 394                 }
 395                 socket_id = (uint8_t)int_fld[FLD_SOCKET];
 396                 if (new_socket_id(socket_id)) {
 397                         if (num_sockets >= RTE_MAX_NUMA_NODES) {
 398                                 print_invalid_socket_id_error();
 399                                 return -1;
 400                         }
 401                         socket_ids[num_sockets++] = socket_id;
 402                 }
 403                 ring_flag = (uint8_t)int_fld[FLD_FLAG];
 404                 if ((ring_flag < RX_RING_ONLY) || (ring_flag > RXTX_RING)) {
 405                         printf("Invalid ring-flag=%d config for port =%d\n",
 406                                 ring_flag,port_id);
 407                         return -1;
 408                 }
 409
 410                 switch (ring_flag & RXTX_RING) {
 411                 case RX_RING_ONLY:
 412                         rxring_numa[port_id] = socket_id;
 413                         break;
 414                 case TX_RING_ONLY:
 415                         txring_numa[port_id] = socket_id;
 416                         break;
 417                 case RXTX_RING:
 418                         rxring_numa[port_id] = socket_id;
 419                         txring_numa[port_id] = socket_id;
 420                         break;
 421                 default:
 422                         printf("Invalid ring-flag=%d config for port=%d\n",
 423                                 ring_flag,port_id);
 424                         break;
 425                 }
 426         }
 427
 428         return 0;
 429 }
 430
 431 static int
 432 parse_event_printing_config(const char *optarg, int enable)
 433 {
 434         uint32_t mask = 0;
 435
 436         if (!strcmp(optarg, "unknown"))
 437                 mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
 438         else if (!strcmp(optarg, "intr_lsc"))
 439                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
 440         else if (!strcmp(optarg, "queue_state"))
 441                 mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
 442         else if (!strcmp(optarg, "intr_reset"))
 443                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
 444         else if (!strcmp(optarg, "vf_mbox"))
 445                 mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
 446         else if (!strcmp(optarg, "ipsec"))
 447                 mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
 448         else if (!strcmp(optarg, "macsec"))
 449                 mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
 450         else if (!strcmp(optarg, "intr_rmv"))
 451                 mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
 452         else if (!strcmp(optarg, "dev_probed"))
 453                 mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
 454         else if (!strcmp(optarg, "dev_released"))
 455                 mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
 456         else if (!strcmp(optarg, "flow_aged"))
 457                 mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
 458         else if (!strcmp(optarg, "all"))
 459                 mask = ~UINT32_C(0);
 460         else {
 461                 fprintf(stderr, "Invalid event: %s\n", optarg);
 462                 return -1;
 463         }
 464         if (enable)
 465                 event_print_mask |= mask;
 466         else
 467                 event_print_mask &= ~mask;
 468         return 0;
 469 }
 470
 471 static int
 472 parse_link_speed(int n)
 473 {
 474         uint32_t speed = ETH_LINK_SPEED_FIXED;
 475
 476         switch (n) {
 477         case 1000:
 478                 speed |= ETH_LINK_SPEED_1G;
 479                 break;
 480         case 10000:
 481                 speed |= ETH_LINK_SPEED_10G;
 482                 break;
 483         case 25000:
 484                 speed |= ETH_LINK_SPEED_25G;
 485                 break;
 486         case 40000:
 487                 speed |= ETH_LINK_SPEED_40G;
 488                 break;
 489         case 50000:
 490                 speed |= ETH_LINK_SPEED_50G;
 491                 break;
 492         case 100000:
 493                 speed |= ETH_LINK_SPEED_100G;
 494                 break;
 495         case 200000:
 496                 speed |= ETH_LINK_SPEED_200G;
 497                 break;
 498         case 100:
 499         case 10:
 500         default:
 501                 printf("Unsupported fixed speed\n");
 502                 return 0;
 503         }
 504
 505         return speed;
 506 }
 507
 508 void
 509 launch_args_parse(int argc, char** argv)
 510 {
 511         int n, opt;
 512         char **argvopt;
 513         int opt_idx;
 514         portid_t pid;
 515         enum { TX, RX };
 516         /* Default offloads for all ports. */
 517         uint64_t rx_offloads = rx_mode.offloads;
 518         uint64_t tx_offloads = tx_mode.offloads;
 519         struct rte_eth_dev_info dev_info;
 520         uint16_t rec_nb_pkts;
 521         int ret;
 522
 523         static struct option lgopts[] = {
 524                 { "help",                       0, 0, 0 },
 525 #ifdef RTE_LIB_CMDLINE
 526                 { "interactive",                0, 0, 0 },
 527                 { "cmdline-file",               1, 0, 0 },
 528                 { "auto-start",                 0, 0, 0 },
 529                 { "eth-peers-configfile",       1, 0, 0 },
 530                 { "eth-peer",                   1, 0, 0 },
 531 #endif
 532                 { "tx-first",                   0, 0, 0 },
 533                 { "stats-period",               1, 0, 0 },
 534                 { "nb-cores",                   1, 0, 0 },
 535                 { "nb-ports",                   1, 0, 0 },
 536                 { "coremask",                   1, 0, 0 },
 537                 { "portmask",                   1, 0, 0 },
 538                 { "portlist",                   1, 0, 0 },
 539                 { "numa",                       0, 0, 0 },
 540                 { "no-numa",                    0, 0, 0 },
 541                 { "mp-anon",                    0, 0, 0 }, /* deprecated */
 542                 { "port-numa-config",           1, 0, 0 },
 543                 { "ring-numa-config",           1, 0, 0 },
 544                 { "socket-num",                 1, 0, 0 },
 545                 { "mbuf-size",                  1, 0, 0 },
 546                 { "total-num-mbufs",            1, 0, 0 },
 547                 { "max-pkt-len",                1, 0, 0 },
 548                 { "max-lro-pkt-size",           1, 0, 0 },
 549                 { "pkt-filter-mode",            1, 0, 0 },
 550                 { "pkt-filter-report-hash",     1, 0, 0 },
 551                 { "pkt-filter-size",            1, 0, 0 },
 552                 { "pkt-filter-drop-queue",      1, 0, 0 },
 553 #ifdef RTE_LIB_LATENCYSTATS
 554                 { "latencystats",               1, 0, 0 },
 555 #endif
 556 #ifdef RTE_LIB_BITRATESTATS
 557                 { "bitrate-stats",              1, 0, 0 },
 558 #endif
 559                 { "disable-crc-strip",          0, 0, 0 },
 560                 { "enable-lro",                 0, 0, 0 },
 561                 { "enable-rx-cksum",            0, 0, 0 },
 562                 { "enable-rx-timestamp",        0, 0, 0 },
 563                 { "enable-scatter",             0, 0, 0 },
 564                 { "enable-hw-vlan",             0, 0, 0 },
 565                 { "enable-hw-vlan-filter",      0, 0, 0 },
 566                 { "enable-hw-vlan-strip",       0, 0, 0 },
 567                 { "enable-hw-vlan-extend",      0, 0, 0 },
 568                 { "enable-hw-qinq-strip",       0, 0, 0 },
 569                 { "enable-drop-en",            0, 0, 0 },
 570                 { "disable-rss",                0, 0, 0 },
 571                 { "port-topology",              1, 0, 0 },
 572                 { "forward-mode",               1, 0, 0 },
 573                 { "rss-ip",                     0, 0, 0 },
 574                 { "rss-udp",                    0, 0, 0 },
 575                 { "rss-level-outer",            0, 0, 0 },
 576                 { "rss-level-inner",            0, 0, 0 },
 577                 { "rxq",                        1, 0, 0 },
 578                 { "txq",                        1, 0, 0 },
 579                 { "rxd",                        1, 0, 0 },
 580                 { "txd",                        1, 0, 0 },
 581                 { "hairpinq",                   1, 0, 0 },
 582                 { "hairpin-mode",               1, 0, 0 },
 583                 { "burst",                      1, 0, 0 },
 584                 { "flowgen-clones",             1, 0, 0 },
 585                 { "mbcache",                    1, 0, 0 },
 586                 { "txpt",                       1, 0, 0 },
 587                 { "txht",                       1, 0, 0 },
 588                 { "txwt",                       1, 0, 0 },
 589                 { "txfreet",                    1, 0, 0 },
 590                 { "txrst",                      1, 0, 0 },
 591                 { "rxpt",                       1, 0, 0 },
 592                 { "rxht",                       1, 0, 0 },
 593                 { "rxwt",                       1, 0, 0 },
 594                 { "rxfreet",                    1, 0, 0 },
 595                 { "no-flush-rx",        0, 0, 0 },
 596                 { "flow-isolate-all",           0, 0, 0 },
 597                 { "rxoffs",                     1, 0, 0 },
 598                 { "rxpkts",                     1, 0, 0 },
 599                 { "txpkts",                     1, 0, 0 },
 600                 { "txonly-multi-flow",          0, 0, 0 },
 601                 { "eth-link-speed",             1, 0, 0 },
 602                 { "disable-link-check",         0, 0, 0 },
 603                 { "disable-device-start",       0, 0, 0 },
 604                 { "no-lsc-interrupt",           0, 0, 0 },
 605                 { "no-rmv-interrupt",           0, 0, 0 },
 606                 { "print-event",                1, 0, 0 },
 607                 { "mask-event",                 1, 0, 0 },
 608                 { "tx-offloads",                1, 0, 0 },
 609                 { "rx-offloads",                1, 0, 0 },
 610                 { "hot-plug",                   0, 0, 0 },
 611                 { "vxlan-gpe-port",             1, 0, 0 },
 612                 { "geneve-parsed-port",         1, 0, 0 },
 613                 { "mlockall",                   0, 0, 0 },
 614                 { "no-mlockall",                0, 0, 0 },
 615                 { "mp-alloc",                   1, 0, 0 },
 616                 { "tx-ip",                      1, 0, 0 },
 617                 { "tx-udp",                     1, 0, 0 },
 618                 { "noisy-tx-sw-buffer-size",    1, 0, 0 },
 619                 { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 },
 620                 { "noisy-lkup-memory",          1, 0, 0 },
 621                 { "noisy-lkup-num-writes",      1, 0, 0 },
 622                 { "noisy-lkup-num-reads",       1, 0, 0 },
 623                 { "noisy-lkup-num-reads-writes", 1, 0, 0 },
 624                 { "no-iova-contig",             0, 0, 0 },
 625                 { "rx-mq-mode",                 1, 0, 0 },
 626                 { "record-core-cycles",         0, 0, 0 },
 627                 { "record-burst-stats",         0, 0, 0 },
 628                 { 0, 0, 0, 0 },
 629         };
 630
 631         argvopt = argv;
 632
 633 #ifdef RTE_LIB_CMDLINE
 634 #define SHORTOPTS "i"
 635 #else
 636 #define SHORTOPTS ""
 637 #endif
 638         while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
 639                                  lgopts, &opt_idx)) != EOF) {
 640                 switch (opt) {
 641 #ifdef RTE_LIB_CMDLINE
 642                 case 'i':
 643                         printf("Interactive-mode selected\n");
 644                         interactive = 1;
 645                         break;
 646 #endif
 647                 case 'a':
 648                         printf("Auto-start selected\n");
 649                         auto_start = 1;
 650                         break;
 651
 652                 case 0: /*long options */
 653                         if (!strcmp(lgopts[opt_idx].name, "help")) {
 654                                 usage(argv[0]);
 655                                 exit(EXIT_SUCCESS);
 656                         }
 657 #ifdef RTE_LIB_CMDLINE
 658                         if (!strcmp(lgopts[opt_idx].name, "interactive")) {
 659                                 printf("Interactive-mode selected\n");
 660                                 interactive = 1;
 661                         }
 662                         if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
 663                                 printf("CLI commands to be read from %s\n",
 664                                        optarg);
 665                                 strlcpy(cmdline_filename, optarg,
 666                                         sizeof(cmdline_filename));
 667                         }
 668                         if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
 669                                 printf("Auto-start selected\n");
 670                                 auto_start = 1;
 671                         }
 672                         if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
 673                                 printf("Ports to start sending a burst of "
 674                                                 "packets first\n");
 675                                 tx_first = 1;
 676                         }
 677                         if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
 678                                 char *end = NULL;
 679                                 unsigned int n;
 680
 681                                 n = strtoul(optarg, &end, 10);
 682                                 if ((optarg[0] == '\0') || (end == NULL) ||
 683                                                 (*end != '\0'))
 684                                         break;
 685
 686                                 stats_period = n;
 687                                 break;
 688                         }
 689                         if (!strcmp(lgopts[opt_idx].name,
 690                                     "eth-peers-configfile")) {
 691                                 if (init_peer_eth_addrs(optarg) != 0)
 692                                         rte_exit(EXIT_FAILURE,
 693                                                  "Cannot open logfile\n");
 694                         }
 695                         if (!strcmp(lgopts[opt_idx].name, "eth-peer")) {
 696                                 char *port_end;
 697
 698                                 errno = 0;
 699                                 n = strtoul(optarg, &port_end, 10);
 700                                 if (errno != 0 || port_end == optarg || *port_end++ != ',')
 701                                         rte_exit(EXIT_FAILURE,
 702                                                  "Invalid eth-peer: %s", optarg);
 703                                 if (n >= RTE_MAX_ETHPORTS)
 704                                         rte_exit(EXIT_FAILURE,
 705                                                  "eth-peer: port %d >= RTE_MAX_ETHPORTS(%d)\n",
 706                                                  n, RTE_MAX_ETHPORTS);
 707
 708                                 if (rte_ether_unformat_addr(port_end,
 709                                                 &peer_eth_addrs[n]) < 0)
 710                                         rte_exit(EXIT_FAILURE,
 711                                                  "Invalid ethernet address: %s\n",
 712                                                  port_end);
 713                                 nb_peer_eth_addrs++;
 714                         }
 715 #endif
 716                         if (!strcmp(lgopts[opt_idx].name, "tx-ip")) {
 717                                 struct in_addr in;
 718                                 char *end;
 719
 720                                 end = strchr(optarg, ',');
 721                                 if (end == optarg || !end)
 722                                         rte_exit(EXIT_FAILURE,
 723                                                  "Invalid tx-ip: %s", optarg);
 724
 725                                 *end++ = 0;
 726                                 if (inet_aton(optarg, &in) == 0)
 727                                         rte_exit(EXIT_FAILURE,
 728                                                  "Invalid source IP address: %s\n",
 729                                                  optarg);
 730                                 tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr);
 731
 732                                 if (inet_aton(end, &in) == 0)
 733                                         rte_exit(EXIT_FAILURE,
 734                                                  "Invalid destination IP address: %s\n",
 735                                                  optarg);
 736                                 tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr);
 737                         }
 738                         if (!strcmp(lgopts[opt_idx].name, "tx-udp")) {
 739                                 char *end = NULL;
 740
 741                                 errno = 0;
 742                                 n = strtoul(optarg, &end, 10);
 743                                 if (errno != 0 || end == optarg ||
 744                                     n > UINT16_MAX ||
 745                                     !(*end == '\0' || *end == ','))
 746                                         rte_exit(EXIT_FAILURE,
 747                                                  "Invalid UDP port: %s\n",
 748                                                  optarg);
 749                                 tx_udp_src_port = n;
 750                                 if (*end == ',') {
 751                                         char *dst = end + 1;
 752
 753                                         n = strtoul(dst, &end, 10);
 754                                         if (errno != 0 || end == dst ||
 755                                             n > UINT16_MAX || *end)
 756                                                 rte_exit(EXIT_FAILURE,
 757                                                          "Invalid destination UDP port: %s\n",
 758                                                          dst);
 759                                         tx_udp_dst_port = n;
 760                                 } else {
 761                                         tx_udp_dst_port = n;
 762                                 }
 763
 764                         }
 765                         if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
 766                                 n = atoi(optarg);
 767                                 if (n > 0 && n <= nb_ports)
 768                                         nb_fwd_ports = n;
 769                                 else
 770                                         rte_exit(EXIT_FAILURE,
 771                                                  "Invalid port %d\n", n);
 772                         }
 773                         if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
 774                                 n = atoi(optarg);
 775                                 if (n > 0 && n <= nb_lcores)
 776                                         nb_fwd_lcores = (uint8_t) n;
 777                                 else
 778                                         rte_exit(EXIT_FAILURE,
 779                                                  "nb-cores should be > 0 and <= %d\n",
 780                                                  nb_lcores);
 781                         }
 782                         if (!strcmp(lgopts[opt_idx].name, "coremask"))
 783                                 parse_fwd_coremask(optarg);
 784                         if (!strcmp(lgopts[opt_idx].name, "portmask"))
 785                                 parse_fwd_portmask(optarg);
 786                         if (!strcmp(lgopts[opt_idx].name, "portlist"))
 787                                 parse_fwd_portlist(optarg);
 788                         if (!strcmp(lgopts[opt_idx].name, "no-numa"))
 789                                 numa_support = 0;
 790                         if (!strcmp(lgopts[opt_idx].name, "numa"))
 791                                 numa_support = 1;
 792                         if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
 793                                 mp_alloc_type = MP_ALLOC_ANON;
 794                         }
 795                         if (!strcmp(lgopts[opt_idx].name, "mp-alloc")) {
 796                                 if (!strcmp(optarg, "native"))
 797                                         mp_alloc_type = MP_ALLOC_NATIVE;
 798                                 else if (!strcmp(optarg, "anon"))
 799                                         mp_alloc_type = MP_ALLOC_ANON;
 800                                 else if (!strcmp(optarg, "xmem"))
 801                                         mp_alloc_type = MP_ALLOC_XMEM;
 802                                 else if (!strcmp(optarg, "xmemhuge"))
 803                                         mp_alloc_type = MP_ALLOC_XMEM_HUGE;
 804                                 else if (!strcmp(optarg, "xbuf"))
 805                                         mp_alloc_type = MP_ALLOC_XBUF;
 806                                 else
 807                                         rte_exit(EXIT_FAILURE,
 808                                                 "mp-alloc %s invalid - must be: "
 809                                                 "native, anon, xmem or xmemhuge\n",
 810                                                  optarg);
 811                         }
 812                         if (!strcmp(lgopts[opt_idx].name, "port-numa-config")) {
 813                                 if (parse_portnuma_config(optarg))
 814                                         rte_exit(EXIT_FAILURE,
 815                                            "invalid port-numa configuration\n");
 816                         }
 817                         if (!strcmp(lgopts[opt_idx].name, "ring-numa-config"))
 818                                 if (parse_ringnuma_config(optarg))
 819                                         rte_exit(EXIT_FAILURE,
 820                                            "invalid ring-numa configuration\n");
 821                         if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
 822                                 n = atoi(optarg);
 823                                 if (!new_socket_id((uint8_t)n)) {
 824                                         socket_num = (uint8_t)n;
 825                                 } else {
 826                                         print_invalid_socket_id_error();
 827                                         rte_exit(EXIT_FAILURE,
 828                                                 "Invalid socket id");
 829                                 }
 830                         }
 831                         if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
 832                                 unsigned int mb_sz[MAX_SEGS_BUFFER_SPLIT];
 833                                 unsigned int nb_segs, i;
 834
 835                                 nb_segs = parse_item_list(optarg, "mbuf-size",
 836                                         MAX_SEGS_BUFFER_SPLIT, mb_sz, 0);
 837                                 if (nb_segs <= 0)
 838                                         rte_exit(EXIT_FAILURE,
 839                                                  "bad mbuf-size\n");
 840                                 for (i = 0; i < nb_segs; i++) {
 841                                         if (mb_sz[i] <= 0 || mb_sz[i] > 0xFFFF)
 842                                                 rte_exit(EXIT_FAILURE,
 843                                                          "mbuf-size should be "
 844                                                          "> 0 and < 65536\n");
 845                                         mbuf_data_size[i] = (uint16_t) mb_sz[i];
 846                                 }
 847                                 mbuf_data_size_n = nb_segs;
 848                         }
 849                         if (!strcmp(lgopts[opt_idx].name, "total-num-mbufs")) {
 850                                 n = atoi(optarg);
 851                                 if (n > 1024)
 852                                         param_total_num_mbufs = (unsigned)n;
 853                                 else
 854                                         rte_exit(EXIT_FAILURE,
 855                                                  "total-num-mbufs should be > 1024\n");
 856                         }
 857                         if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
 858                                 n = atoi(optarg);
 859                                 if (n >= RTE_ETHER_MIN_LEN)
 860                                         rx_mode.max_rx_pkt_len = (uint32_t) n;
 861                                 else
 862                                         rte_exit(EXIT_FAILURE,
 863                                                  "Invalid max-pkt-len=%d - should be > %d\n",
 864                                                  n, RTE_ETHER_MIN_LEN);
 865                         }
 866                         if (!strcmp(lgopts[opt_idx].name, "max-lro-pkt-size")) {
 867                                 n = atoi(optarg);
 868                                 rx_mode.max_lro_pkt_size = (uint32_t) n;
 869                         }
 870                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-mode")) {
 871                                 if (!strcmp(optarg, "signature"))
 872                                         fdir_conf.mode =
 873                                                 RTE_FDIR_MODE_SIGNATURE;
 874                                 else if (!strcmp(optarg, "perfect"))
 875                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT;
 876                                 else if (!strcmp(optarg, "perfect-mac-vlan"))
 877                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_MAC_VLAN;
 878                                 else if (!strcmp(optarg, "perfect-tunnel"))
 879                                         fdir_conf.mode = RTE_FDIR_MODE_PERFECT_TUNNEL;
 880                                 else if (!strcmp(optarg, "none"))
 881                                         fdir_conf.mode = RTE_FDIR_MODE_NONE;
 882                                 else
 883                                         rte_exit(EXIT_FAILURE,
 884                                                  "pkt-mode-invalid %s invalid - must be: "
 885                                                  "none, signature, perfect, perfect-mac-vlan"
 886                                                  " or perfect-tunnel\n",
 887                                                  optarg);
 888                         }
 889                         if (!strcmp(lgopts[opt_idx].name,
 890                                     "pkt-filter-report-hash")) {
 891                                 if (!strcmp(optarg, "none"))
 892                                         fdir_conf.status =
 893                                                 RTE_FDIR_NO_REPORT_STATUS;
 894                                 else if (!strcmp(optarg, "match"))
 895                                         fdir_conf.status =
 896                                                 RTE_FDIR_REPORT_STATUS;
 897                                 else if (!strcmp(optarg, "always"))
 898                                         fdir_conf.status =
 899                                                 RTE_FDIR_REPORT_STATUS_ALWAYS;
 900                                 else
 901                                         rte_exit(EXIT_FAILURE,
 902                                                  "pkt-filter-report-hash %s invalid "
 903                                                  "- must be: none or match or always\n",
 904                                                  optarg);
 905                         }
 906                         if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
 907                                 if (!strcmp(optarg, "64K"))
 908                                         fdir_conf.pballoc =
 909                                                 RTE_FDIR_PBALLOC_64K;
 910                                 else if (!strcmp(optarg, "128K"))
 911                                         fdir_conf.pballoc =
 912                                                 RTE_FDIR_PBALLOC_128K;
 913                                 else if (!strcmp(optarg, "256K"))
 914                                         fdir_conf.pballoc =
 915                                                 RTE_FDIR_PBALLOC_256K;
 916                                 else
 917                                         rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
 918                                                  " must be: 64K or 128K or 256K\n",
 919                                                  optarg);
 920                         }
 921                         if (!strcmp(lgopts[opt_idx].name,
 922                                     "pkt-filter-drop-queue")) {
 923                                 n = atoi(optarg);
 924                                 if (n >= 0)
 925                                         fdir_conf.drop_queue = (uint8_t) n;
 926                                 else
 927                                         rte_exit(EXIT_FAILURE,
 928                                                  "drop queue %d invalid - must"
 929                                                  "be >= 0 \n", n);
 930                         }
 931 #ifdef RTE_LIB_LATENCYSTATS
 932                         if (!strcmp(lgopts[opt_idx].name,
 933                                     "latencystats")) {
 934                                 n = atoi(optarg);
 935                                 if (n >= 0) {
 936                                         latencystats_lcore_id = (lcoreid_t) n;
 937                                         latencystats_enabled = 1;
 938                                 } else
 939                                         rte_exit(EXIT_FAILURE,
 940                                                  "invalid lcore id %d for latencystats"
 941                                                  " must be >= 0\n", n);
 942                         }
 943 #endif
 944 #ifdef RTE_LIB_BITRATESTATS
 945                         if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
 946                                 n = atoi(optarg);
 947                                 if (n >= 0) {
 948                                         bitrate_lcore_id = (lcoreid_t) n;
 949                                         bitrate_enabled = 1;
 950                                 } else
 951                                         rte_exit(EXIT_FAILURE,
 952                                                  "invalid lcore id %d for bitrate stats"
 953                                                  " must be >= 0\n", n);
 954                         }
 955 #endif
 956                         if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
 957                                 rx_offloads |= DEV_RX_OFFLOAD_KEEP_CRC;
 958                         if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
 959                                 rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
 960                         if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
 961                                 rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
 962                         if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
 963                                 rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
 964                         if (!strcmp(lgopts[opt_idx].name,
 965                                         "enable-rx-timestamp"))
 966                                 rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
 967                         if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan"))
 968                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN;
 969
 970                         if (!strcmp(lgopts[opt_idx].name,
 971                                         "enable-hw-vlan-filter"))
 972                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
 973
 974                         if (!strcmp(lgopts[opt_idx].name,
 975                                         "enable-hw-vlan-strip"))
 976                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
 977
 978                         if (!strcmp(lgopts[opt_idx].name,
 979                                         "enable-hw-vlan-extend"))
 980                                 rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
 981
 982                         if (!strcmp(lgopts[opt_idx].name,
 983                                         "enable-hw-qinq-strip"))
 984                                 rx_offloads |= DEV_RX_OFFLOAD_QINQ_STRIP;
 985
 986                         if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
 987                                 rx_drop_en = 1;
 988
 989                         if (!strcmp(lgopts[opt_idx].name, "disable-rss"))
 990                                 rss_hf = 0;
 991                         if (!strcmp(lgopts[opt_idx].name, "port-topology")) {
 992                                 if (!strcmp(optarg, "paired"))
 993                                         port_topology = PORT_TOPOLOGY_PAIRED;
 994                                 else if (!strcmp(optarg, "chained"))
 995                                         port_topology = PORT_TOPOLOGY_CHAINED;
 996                                 else if (!strcmp(optarg, "loop"))
 997                                         port_topology = PORT_TOPOLOGY_LOOP;
 998                                 else
 999                                         rte_exit(EXIT_FAILURE, "port-topology %s invalid -"
1000                                                  " must be: paired, chained or loop\n",
1001                                                  optarg);
1002                         }
1003                         if (!strcmp(lgopts[opt_idx].name, "forward-mode"))
1004                                 set_pkt_forwarding_mode(optarg);
1005                         if (!strcmp(lgopts[opt_idx].name, "rss-ip"))
1006                                 rss_hf = ETH_RSS_IP;
1007                         if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
1008                                 rss_hf = ETH_RSS_UDP;
1009                         if (!strcmp(lgopts[opt_idx].name, "rss-level-inner"))
1010                                 rss_hf |= ETH_RSS_LEVEL_INNERMOST;
1011                         if (!strcmp(lgopts[opt_idx].name, "rss-level-outer"))
1012                                 rss_hf |= ETH_RSS_LEVEL_OUTERMOST;
1013                         if (!strcmp(lgopts[opt_idx].name, "rxq")) {
1014                                 n = atoi(optarg);
1015                                 if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
1016                                         nb_rxq = (queueid_t) n;
1017                                 else
1018                                         rte_exit(EXIT_FAILURE, "rxq %d invalid - must be"
1019                                                   " >= 0 && <= %u\n", n,
1020                                                   get_allowed_max_nb_rxq(&pid));
1021                         }
1022                         if (!strcmp(lgopts[opt_idx].name, "txq")) {
1023                                 n = atoi(optarg);
1024                                 if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
1025                                         nb_txq = (queueid_t) n;
1026                                 else
1027                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1028                                                   " >= 0 && <= %u\n", n,
1029                                                   get_allowed_max_nb_txq(&pid));
1030                         }
1031                         if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
1032                                 n = atoi(optarg);
1033                                 if (n >= 0 &&
1034                                     check_nb_hairpinq((queueid_t)n) == 0)
1035                                         nb_hairpinq = (queueid_t) n;
1036                                 else
1037                                         rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
1038                                                   " >= 0 && <= %u\n", n,
1039                                                   get_allowed_max_nb_hairpinq
1040                                                   (&pid));
1041                                 if ((n + nb_txq) < 0 ||
1042                                     check_nb_txq((queueid_t)(n + nb_txq)) != 0)
1043                                         rte_exit(EXIT_FAILURE, "txq + hairpinq "
1044                                                  "%d invalid - must be"
1045                                                   " >= 0 && <= %u\n",
1046                                                   n + nb_txq,
1047                                                   get_allowed_max_nb_txq(&pid));
1048                                 if ((n + nb_rxq) < 0 ||
1049                                     check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
1050                                         rte_exit(EXIT_FAILURE, "rxq + hairpinq "
1051                                                  "%d invalid - must be"
1052                                                   " >= 0 && <= %u\n",
1053                                                   n + nb_rxq,
1054                                                   get_allowed_max_nb_rxq(&pid));
1055                         }
1056                         if (!nb_rxq && !nb_txq) {
1057                                 rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
1058                                                 "be non-zero\n");
1059                         }
1060                         if (!strcmp(lgopts[opt_idx].name, "hairpin-mode")) {
1061                                 char *end = NULL;
1062                                 unsigned int n;
1063
1064                                 errno = 0;
1065                                 n = strtoul(optarg, &end, 0);
1066                                 if (errno != 0 || end == optarg)
1067                                         rte_exit(EXIT_FAILURE, "hairpin mode invalid\n");
1068                                 else
1069                                         hairpin_mode = (uint16_t)n;
1070                         }
1071                         if (!strcmp(lgopts[opt_idx].name, "burst")) {
1072                                 n = atoi(optarg);
1073                                 if (n == 0) {
1074                                         /* A burst size of zero means that the
1075                                          * PMD should be queried for
1076                                          * recommended Rx burst size. Since
1077                                          * testpmd uses a single size for all
1078                                          * ports, port 0 is queried for the
1079                                          * value, on the assumption that all
1080                                          * ports are of the same NIC model.
1081                                          */
1082                                         ret = eth_dev_info_get_print_err(
1083                                                                 0,
1084                                                                 &dev_info);
1085                                         if (ret != 0)
1086                                                 return;
1087
1088                                         rec_nb_pkts = dev_info
1089                                                 .default_rxportconf.burst_size;
1090
1091                                         if (rec_nb_pkts == 0)
1092                                                 rte_exit(EXIT_FAILURE,
1093                                                         "PMD does not recommend a burst size. "
1094                                                         "Provided value must be between "
1095                                                         "1 and %d\n", MAX_PKT_BURST);
1096                                         else if (rec_nb_pkts > MAX_PKT_BURST)
1097                                                 rte_exit(EXIT_FAILURE,
1098                                                         "PMD recommended burst size of %d"
1099                                                         " exceeds maximum value of %d\n",
1100                                                         rec_nb_pkts, MAX_PKT_BURST);
1101                                         printf("Using PMD-provided burst value of %d\n",
1102                                                 rec_nb_pkts);
1103                                         nb_pkt_per_burst = rec_nb_pkts;
1104                                 } else if (n > MAX_PKT_BURST)
1105                                         rte_exit(EXIT_FAILURE,
1106                                                 "burst must be between1 and %d\n",
1107                                                 MAX_PKT_BURST);
1108                                 else
1109                                         nb_pkt_per_burst = (uint16_t) n;
1110                         }
1111                         if (!strcmp(lgopts[opt_idx].name, "flowgen-clones")) {
1112                                 n = atoi(optarg);
1113                                 if (n >= 0)
1114                                         nb_pkt_flowgen_clones = (uint16_t) n;
1115                                 else
1116                                         rte_exit(EXIT_FAILURE,
1117                                                  "clones must be >= 0 and <= current burst\n");
1118                         }
1119                         if (!strcmp(lgopts[opt_idx].name, "mbcache")) {
1120                                 n = atoi(optarg);
1121                                 if ((n >= 0) &&
1122                                     (n <= RTE_MEMPOOL_CACHE_MAX_SIZE))
1123                                         mb_mempool_cache = (uint16_t) n;
1124                                 else
1125                                         rte_exit(EXIT_FAILURE,
1126                                                  "mbcache must be >= 0 and <= %d\n",
1127                                                  RTE_MEMPOOL_CACHE_MAX_SIZE);
1128                         }
1129                         if (!strcmp(lgopts[opt_idx].name, "txfreet")) {
1130                                 n = atoi(optarg);
1131                                 if (n >= 0)
1132                                         tx_free_thresh = (int16_t)n;
1133                                 else
1134                                         rte_exit(EXIT_FAILURE, "txfreet must be >= 0\n");
1135                         }
1136                         if (!strcmp(lgopts[opt_idx].name, "txrst")) {
1137                                 n = atoi(optarg);
1138                                 if (n >= 0)
1139                                         tx_rs_thresh = (int16_t)n;
1140                                 else
1141                                         rte_exit(EXIT_FAILURE, "txrst must be >= 0\n");
1142                         }
1143                         if (!strcmp(lgopts[opt_idx].name, "rxd")) {
1144                                 n = atoi(optarg);
1145                                 if (n > 0) {
1146                                         if (rx_free_thresh >= n)
1147                                                 rte_exit(EXIT_FAILURE,
1148                                                          "rxd must be > "
1149                                                          "rx_free_thresh(%d)\n",
1150                                                          (int)rx_free_thresh);
1151                                         else
1152                                                 nb_rxd = (uint16_t) n;
1153                                 } else
1154                                         rte_exit(EXIT_FAILURE,
1155                                                  "rxd(%d) invalid - must be > 0\n",
1156                                                  n);
1157                         }
1158                         if (!strcmp(lgopts[opt_idx].name, "txd")) {
1159                                 n = atoi(optarg);
1160                                 if (n > 0)
1161                                         nb_txd = (uint16_t) n;
1162                                 else
1163                                         rte_exit(EXIT_FAILURE, "txd must be in > 0\n");
1164                         }
1165                         if (!strcmp(lgopts[opt_idx].name, "txpt")) {
1166                                 n = atoi(optarg);
1167                                 if (n >= 0)
1168                                         tx_pthresh = (int8_t)n;
1169                                 else
1170                                         rte_exit(EXIT_FAILURE, "txpt must be >= 0\n");
1171                         }
1172                         if (!strcmp(lgopts[opt_idx].name, "txht")) {
1173                                 n = atoi(optarg);
1174                                 if (n >= 0)
1175                                         tx_hthresh = (int8_t)n;
1176                                 else
1177                                         rte_exit(EXIT_FAILURE, "txht must be >= 0\n");
1178                         }
1179                         if (!strcmp(lgopts[opt_idx].name, "txwt")) {
1180                                 n = atoi(optarg);
1181                                 if (n >= 0)
1182                                         tx_wthresh = (int8_t)n;
1183                                 else
1184                                         rte_exit(EXIT_FAILURE, "txwt must be >= 0\n");
1185                         }
1186                         if (!strcmp(lgopts[opt_idx].name, "rxpt")) {
1187                                 n = atoi(optarg);
1188                                 if (n >= 0)
1189                                         rx_pthresh = (int8_t)n;
1190                                 else
1191                                         rte_exit(EXIT_FAILURE, "rxpt must be >= 0\n");
1192                         }
1193                         if (!strcmp(lgopts[opt_idx].name, "rxht")) {
1194                                 n = atoi(optarg);
1195                                 if (n >= 0)
1196                                         rx_hthresh = (int8_t)n;
1197                                 else
1198                                         rte_exit(EXIT_FAILURE, "rxht must be >= 0\n");
1199                         }
1200                         if (!strcmp(lgopts[opt_idx].name, "rxwt")) {
1201                                 n = atoi(optarg);
1202                                 if (n >= 0)
1203                                         rx_wthresh = (int8_t)n;
1204                                 else
1205                                         rte_exit(EXIT_FAILURE, "rxwt must be >= 0\n");
1206                         }
1207                         if (!strcmp(lgopts[opt_idx].name, "rxfreet")) {
1208                                 n = atoi(optarg);
1209                                 if (n >= 0)
1210                                         rx_free_thresh = (int16_t)n;
1211                                 else
1212                                         rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
1213                         }
1214                         if (!strcmp(lgopts[opt_idx].name, "rxoffs")) {
1215                                 unsigned int seg_off[MAX_SEGS_BUFFER_SPLIT];
1216                                 unsigned int nb_offs;
1217
1218                                 nb_offs = parse_item_list
1219                                                 (optarg, "rxpkt offsets",
1220                                                  MAX_SEGS_BUFFER_SPLIT,
1221                                                  seg_off, 0);
1222                                 if (nb_offs > 0)
1223                                         set_rx_pkt_offsets(seg_off, nb_offs);
1224                                 else
1225                                         rte_exit(EXIT_FAILURE, "bad rxoffs\n");
1226                         }
1227                         if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
1228                                 unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
1229                                 unsigned int nb_segs;
1230
1231                                 nb_segs = parse_item_list
1232                                                 (optarg, "rxpkt segments",
1233                                                  MAX_SEGS_BUFFER_SPLIT,
1234                                                  seg_len, 0);
1235                                 if (nb_segs > 0)
1236                                         set_rx_pkt_segments(seg_len, nb_segs);
1237                                 else
1238                                         rte_exit(EXIT_FAILURE, "bad rxpkts\n");
1239                         }
1240                         if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
1241                                 unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
1242                                 unsigned int nb_segs;
1243
1244                                 nb_segs = parse_item_list(optarg, "txpkt segments",
1245                                                 RTE_MAX_SEGS_PER_PKT, seg_lengths, 0);
1246                                 if (nb_segs > 0)
1247                                         set_tx_pkt_segments(seg_lengths, nb_segs);
1248                                 else
1249                                         rte_exit(EXIT_FAILURE, "bad txpkts\n");
1250                         }
1251                         if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
1252                                 txonly_multi_flow = 1;
1253                         if (!strcmp(lgopts[opt_idx].name, "no-flush-rx"))
1254                                 no_flush_rx = 1;
1255                         if (!strcmp(lgopts[opt_idx].name, "eth-link-speed")) {
1256                                 n = atoi(optarg);
1257                                 if (n >= 0 && parse_link_speed(n) > 0)
1258                                         eth_link_speed = parse_link_speed(n);
1259                         }
1260                         if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
1261                                 no_link_check = 1;
1262                         if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
1263                                 no_device_start = 1;
1264                         if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
1265                                 lsc_interrupt = 0;
1266                         if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
1267                                 rmv_interrupt = 0;
1268                         if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
1269                                 flow_isolate_all = 1;
1270                         if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
1271                                 char *end = NULL;
1272                                 n = strtoull(optarg, &end, 16);
1273                                 if (n >= 0)
1274                                         tx_offloads = (uint64_t)n;
1275                                 else
1276                                         rte_exit(EXIT_FAILURE,
1277                                                  "tx-offloads must be >= 0\n");
1278                         }
1279
1280                         if (!strcmp(lgopts[opt_idx].name, "rx-offloads")) {
1281                                 char *end = NULL;
1282                                 n = strtoull(optarg, &end, 16);
1283                                 if (n >= 0)
1284                                         rx_offloads = (uint64_t)n;
1285                                 else
1286                                         rte_exit(EXIT_FAILURE,
1287                                                  "rx-offloads must be >= 0\n");
1288                         }
1289
1290                         if (!strcmp(lgopts[opt_idx].name, "vxlan-gpe-port")) {
1291                                 n = atoi(optarg);
1292                                 if (n >= 0)
1293                                         vxlan_gpe_udp_port = (uint16_t)n;
1294                                 else
1295                                         rte_exit(EXIT_FAILURE,
1296                                                  "vxlan-gpe-port must be >= 0\n");
1297                         }
1298                         if (!strcmp(lgopts[opt_idx].name,
1299                                     "geneve-parsed-port")) {
1300                                 n = atoi(optarg);
1301                                 if (n >= 0)
1302                                         geneve_udp_port = (uint16_t)n;
1303                                 else
1304                                         rte_exit(EXIT_FAILURE,
1305                                                  "geneve-parsed-port must be >= 0\n");
1306                         }
1307                         if (!strcmp(lgopts[opt_idx].name, "print-event"))
1308                                 if (parse_event_printing_config(optarg, 1)) {
1309                                         rte_exit(EXIT_FAILURE,
1310                                                  "invalid print-event argument\n");
1311                                 }
1312                         if (!strcmp(lgopts[opt_idx].name, "mask-event"))
1313                                 if (parse_event_printing_config(optarg, 0)) {
1314                                         rte_exit(EXIT_FAILURE,
1315                                                  "invalid mask-event argument\n");
1316                                 }
1317                         if (!strcmp(lgopts[opt_idx].name, "hot-plug"))
1318                                 hot_plug = 1;
1319                         if (!strcmp(lgopts[opt_idx].name, "mlockall"))
1320                                 do_mlockall = 1;
1321                         if (!strcmp(lgopts[opt_idx].name, "no-mlockall"))
1322                                 do_mlockall = 0;
1323                         if (!strcmp(lgopts[opt_idx].name,
1324                                     "noisy-tx-sw-buffer-size")) {
1325                                 n = atoi(optarg);
1326                                 if (n >= 0)
1327                                         noisy_tx_sw_bufsz = n;
1328                                 else
1329                                         rte_exit(EXIT_FAILURE,
1330                                                 "noisy-tx-sw-buffer-size must be >= 0\n");
1331                         }
1332                         if (!strcmp(lgopts[opt_idx].name,
1333                                     "noisy-tx-sw-buffer-flushtime")) {
1334                                 n = atoi(optarg);
1335                                 if (n >= 0)
1336                                         noisy_tx_sw_buf_flush_time = n;
1337                                 else
1338                                         rte_exit(EXIT_FAILURE,
1339                                                  "noisy-tx-sw-buffer-flushtime must be >= 0\n");
1340                         }
1341                         if (!strcmp(lgopts[opt_idx].name,
1342                                     "noisy-lkup-memory")) {
1343                                 n = atoi(optarg);
1344                                 if (n >= 0)
1345                                         noisy_lkup_mem_sz = n;
1346                                 else
1347                                         rte_exit(EXIT_FAILURE,
1348                                                  "noisy-lkup-memory must be >= 0\n");
1349                         }
1350                         if (!strcmp(lgopts[opt_idx].name,
1351                                     "noisy-lkup-num-writes")) {
1352                                 n = atoi(optarg);
1353                                 if (n >= 0)
1354                                         noisy_lkup_num_writes = n;
1355                                 else
1356                                         rte_exit(EXIT_FAILURE,
1357                                                  "noisy-lkup-num-writes must be >= 0\n");
1358                         }
1359                         if (!strcmp(lgopts[opt_idx].name,
1360                                     "noisy-lkup-num-reads")) {
1361                                 n = atoi(optarg);
1362                                 if (n >= 0)
1363                                         noisy_lkup_num_reads = n;
1364                                 else
1365                                         rte_exit(EXIT_FAILURE,
1366                                                  "noisy-lkup-num-reads must be >= 0\n");
1367                         }
1368                         if (!strcmp(lgopts[opt_idx].name,
1369                                     "noisy-lkup-num-reads-writes")) {
1370                                 n = atoi(optarg);
1371                                 if (n >= 0)
1372                                         noisy_lkup_num_reads_writes = n;
1373                                 else
1374                                         rte_exit(EXIT_FAILURE,
1375                                                  "noisy-lkup-num-reads-writes must be >= 0\n");
1376                         }
1377                         if (!strcmp(lgopts[opt_idx].name, "no-iova-contig"))
1378                                 mempool_flags = MEMPOOL_F_NO_IOVA_CONTIG;
1379
1380                         if (!strcmp(lgopts[opt_idx].name, "rx-mq-mode")) {
1381                                 char *end = NULL;
1382                                 n = strtoul(optarg, &end, 16);
1383                                 if (n >= 0 && n <= ETH_MQ_RX_VMDQ_DCB_RSS)
1384                                         rx_mq_mode = (enum rte_eth_rx_mq_mode)n;
1385                                 else
1386                                         rte_exit(EXIT_FAILURE,
1387                                                  "rx-mq-mode must be >= 0 and <= %d\n",
1388                                                  ETH_MQ_RX_VMDQ_DCB_RSS);
1389                         }
1390                         if (!strcmp(lgopts[opt_idx].name, "record-core-cycles"))
1391                                 record_core_cycles = 1;
1392                         if (!strcmp(lgopts[opt_idx].name, "record-burst-stats"))
1393                                 record_burst_stats = 1;
1394                         break;
1395                 case 'h':
1396                         usage(argv[0]);
1397                         exit(EXIT_SUCCESS);
1398                         break;
1399                 default:
1400                         usage(argv[0]);
1401                         printf("Invalid option: %s\n", argv[optind]);
1402                         rte_exit(EXIT_FAILURE,
1403                                  "Command line is incomplete or incorrect\n");
1404                         break;
1405                 }
1406         }
1407
1408         if (optind != argc) {
1409                 usage(argv[0]);
1410                 printf("Invalid parameter: %s\n", argv[optind]);
1411                 rte_exit(EXIT_FAILURE, "Command line is incorrect\n");
1412         }
1413
1414         /* Set offload configuration from command line parameters. */
1415         rx_mode.offloads = rx_offloads;
1416         tx_mode.offloads = tx_offloads;
1417
1418         if (mempool_flags & MEMPOOL_F_NO_IOVA_CONTIG &&
1419             mp_alloc_type != MP_ALLOC_ANON) {
1420                 TESTPMD_LOG(WARNING, "cannot use no-iova-contig without "
1421                                   "mp-alloc=anon. mempool no-iova-contig is "
1422                                   "ignored\n");
1423                 mempool_flags = 0;
1424         }
1425 }