1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2010-2017 Intel Corporation
13 #include <sys/types.h>
17 #include <sys/queue.h>
24 #include <rte_common.h>
25 #include <rte_errno.h>
26 #include <rte_byteorder.h>
28 #include <rte_debug.h>
29 #include <rte_cycles.h>
30 #include <rte_malloc_heap.h>
31 #include <rte_memory.h>
32 #include <rte_memcpy.h>
33 #include <rte_launch.h>
35 #include <rte_alarm.h>
36 #include <rte_per_lcore.h>
37 #include <rte_lcore.h>
38 #include <rte_atomic.h>
39 #include <rte_branch_prediction.h>
40 #include <rte_mempool.h>
41 #include <rte_malloc.h>
43 #include <rte_mbuf_pool_ops.h>
44 #include <rte_interrupts.h>
46 #include <rte_ether.h>
47 #include <rte_ethdev.h>
49 #include <rte_string_fns.h>
50 #ifdef RTE_LIBRTE_IXGBE_PMD
51 #include <rte_pmd_ixgbe.h>
53 #ifdef RTE_LIBRTE_PDUMP
54 #include <rte_pdump.h>
57 #include <rte_metrics.h>
58 #ifdef RTE_LIBRTE_BITRATE
59 #include <rte_bitrate.h>
61 #ifdef RTE_LIBRTE_LATENCY_STATS
62 #include <rte_latencystats.h>
68 /* FreeBSD may not have MAP_HUGETLB (in fact, it probably doesn't) */
69 #define HUGE_FLAG (0x40000)
71 #define HUGE_FLAG MAP_HUGETLB
74 #ifndef MAP_HUGE_SHIFT
75 /* older kernels (or FreeBSD) will not have this define */
76 #define HUGE_SHIFT (26)
78 #define HUGE_SHIFT MAP_HUGE_SHIFT
81 #define EXTMEM_HEAP_NAME "extmem"
83 uint16_t verbose_level = 0; /**< Silent by default. */
84 int testpmd_logtype; /**< Log type for testpmd logs */
86 /* use master core for command line ? */
87 uint8_t interactive = 0;
88 uint8_t auto_start = 0;
90 char cmdline_filename[PATH_MAX] = {0};
93 * NUMA support configuration.
94 * When set, the NUMA support attempts to dispatch the allocation of the
95 * RX and TX memory rings, and of the DMA memory buffers (mbufs) for the
96 * probed ports among the CPU sockets 0 and 1.
97 * Otherwise, all memory is allocated from CPU socket 0.
99 uint8_t numa_support = 1; /**< numa enabled by default */
102 * In UMA mode,all memory is allocated from socket 0 if --socket-num is
105 uint8_t socket_num = UMA_NO_CONFIG;
108 * Select mempool allocation type:
109 * - native: use regular DPDK memory
110 * - anon: use regular DPDK memory to create mempool, but populate using
111 * anonymous memory (may not be IOVA-contiguous)
112 * - xmem: use externally allocated hugepage memory
114 uint8_t mp_alloc_type = MP_ALLOC_NATIVE;
117 * Store specified sockets on which memory pool to be used by ports
120 uint8_t port_numa[RTE_MAX_ETHPORTS];
123 * Store specified sockets on which RX ring to be used by ports
126 uint8_t rxring_numa[RTE_MAX_ETHPORTS];
129 * Store specified sockets on which TX ring to be used by ports
132 uint8_t txring_numa[RTE_MAX_ETHPORTS];
135 * Record the Ethernet address of peer target ports to which packets are
137 * Must be instantiated with the ethernet addresses of peer traffic generator
140 struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
141 portid_t nb_peer_eth_addrs = 0;
144 * Probed Target Environment.
146 struct rte_port *ports; /**< For all probed ethernet ports. */
147 portid_t nb_ports; /**< Number of probed ethernet ports. */
148 struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */
149 lcoreid_t nb_lcores; /**< Number of probed logical cores. */
151 portid_t ports_ids[RTE_MAX_ETHPORTS]; /**< Store all port ids. */
154 * Test Forwarding Configuration.
155 * nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
156 * nb_fwd_ports <= nb_cfg_ports <= nb_ports
158 lcoreid_t nb_cfg_lcores; /**< Number of configured logical cores. */
159 lcoreid_t nb_fwd_lcores; /**< Number of forwarding logical cores. */
160 portid_t nb_cfg_ports; /**< Number of configured ports. */
161 portid_t nb_fwd_ports; /**< Number of forwarding ports. */
163 unsigned int fwd_lcores_cpuids[RTE_MAX_LCORE]; /**< CPU ids configuration. */
164 portid_t fwd_ports_ids[RTE_MAX_ETHPORTS]; /**< Port ids configuration. */
166 struct fwd_stream **fwd_streams; /**< For each RX queue of each port. */
167 streamid_t nb_fwd_streams; /**< Is equal to (nb_ports * nb_rxq). */
170 * Forwarding engines.
172 struct fwd_engine * fwd_engines[] = {
182 #if defined RTE_LIBRTE_PMD_SOFTNIC
185 #ifdef RTE_LIBRTE_IEEE1588
186 &ieee1588_fwd_engine,
191 struct fwd_config cur_fwd_config;
192 struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */
193 uint32_t retry_enabled;
194 uint32_t burst_tx_delay_time = BURST_TX_WAIT_US;
195 uint32_t burst_tx_retry_num = BURST_TX_RETRIES;
197 uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
198 uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if
199 * specified on command-line. */
200 uint16_t stats_period; /**< Period to show statistics (disabled by default) */
203 * In container, it cannot terminate the process which running with 'stats-period'
204 * option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
209 * Configuration of packet segments used by the "txonly" processing engine.
211 uint16_t tx_pkt_length = TXONLY_DEF_PACKET_LEN; /**< TXONLY packet length. */
212 uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT] = {
213 TXONLY_DEF_PACKET_LEN,
215 uint8_t tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */
217 enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
218 /**< Split policy for packets to TX. */
220 uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
221 uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
223 /* current configuration is in DCB or not,0 means it is not in DCB mode */
224 uint8_t dcb_config = 0;
226 /* Whether the dcb is in testing status */
227 uint8_t dcb_test = 0;
230 * Configurable number of RX/TX queues.
232 queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
233 queueid_t nb_txq = 1; /**< Number of TX queues per port. */
236 * Configurable number of RX/TX ring descriptors.
237 * Defaults are supplied by drivers via ethdev.
239 #define RTE_TEST_RX_DESC_DEFAULT 0
240 #define RTE_TEST_TX_DESC_DEFAULT 0
241 uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
242 uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
244 #define RTE_PMD_PARAM_UNSET -1
246 * Configurable values of RX and TX ring threshold registers.
249 int8_t rx_pthresh = RTE_PMD_PARAM_UNSET;
250 int8_t rx_hthresh = RTE_PMD_PARAM_UNSET;
251 int8_t rx_wthresh = RTE_PMD_PARAM_UNSET;
253 int8_t tx_pthresh = RTE_PMD_PARAM_UNSET;
254 int8_t tx_hthresh = RTE_PMD_PARAM_UNSET;
255 int8_t tx_wthresh = RTE_PMD_PARAM_UNSET;
258 * Configurable value of RX free threshold.
260 int16_t rx_free_thresh = RTE_PMD_PARAM_UNSET;
263 * Configurable value of RX drop enable.
265 int8_t rx_drop_en = RTE_PMD_PARAM_UNSET;
268 * Configurable value of TX free threshold.
270 int16_t tx_free_thresh = RTE_PMD_PARAM_UNSET;
273 * Configurable value of TX RS bit threshold.
275 int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
278 * Configurable value of buffered packets before sending.
280 uint16_t noisy_tx_sw_bufsz;
283 * Configurable value of packet buffer timeout.
285 uint16_t noisy_tx_sw_buf_flush_time;
288 * Configurable value for size of VNF internal memory area
289 * used for simulating noisy neighbour behaviour
291 uint64_t noisy_lkup_mem_sz;
294 * Configurable value of number of random writes done in
295 * VNF simulation memory area.
297 uint64_t noisy_lkup_num_writes;
300 * Configurable value of number of random reads done in
301 * VNF simulation memory area.
303 uint64_t noisy_lkup_num_reads;
306 * Configurable value of number of random reads/writes done in
307 * VNF simulation memory area.
309 uint64_t noisy_lkup_num_reads_writes;
312 * Receive Side Scaling (RSS) configuration.
314 uint64_t rss_hf = ETH_RSS_IP; /* RSS IP by default. */
317 * Port topology configuration
319 uint16_t port_topology = PORT_TOPOLOGY_PAIRED; /* Ports are paired by default */
322 * Avoids to flush all the RX streams before starts forwarding.
324 uint8_t no_flush_rx = 0; /* flush by default */
327 * Flow API isolated mode.
329 uint8_t flow_isolate_all;
332 * Avoids to check link status when starting/stopping a port.
334 uint8_t no_link_check = 0; /* check by default */
337 * Enable link status change notification
339 uint8_t lsc_interrupt = 1; /* enabled by default */
342 * Enable device removal notification.
344 uint8_t rmv_interrupt = 1; /* enabled by default */
346 uint8_t hot_plug = 0; /**< hotplug disabled by default. */
348 /* After attach, port setup is called on event or by iterator */
349 bool setup_on_probe_event = true;
351 /* Pretty printing of ethdev events */
352 static const char * const eth_event_desc[] = {
353 [RTE_ETH_EVENT_UNKNOWN] = "unknown",
354 [RTE_ETH_EVENT_INTR_LSC] = "link state change",
355 [RTE_ETH_EVENT_QUEUE_STATE] = "queue state",
356 [RTE_ETH_EVENT_INTR_RESET] = "reset",
357 [RTE_ETH_EVENT_VF_MBOX] = "VF mbox",
358 [RTE_ETH_EVENT_IPSEC] = "IPsec",
359 [RTE_ETH_EVENT_MACSEC] = "MACsec",
360 [RTE_ETH_EVENT_INTR_RMV] = "device removal",
361 [RTE_ETH_EVENT_NEW] = "device probed",
362 [RTE_ETH_EVENT_DESTROY] = "device released",
363 [RTE_ETH_EVENT_MAX] = NULL,
367 * Display or mask ether events
368 * Default to all events except VF_MBOX
370 uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
371 (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
372 (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
373 (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
374 (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
375 (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
376 (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
378 * Decide if all memory are locked for performance.
383 * NIC bypass mode configuration options.
386 #if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
387 /* The NIC bypass watchdog timeout. */
388 uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
392 #ifdef RTE_LIBRTE_LATENCY_STATS
395 * Set when latency stats is enabled in the commandline
397 uint8_t latencystats_enabled;
400 * Lcore ID to serive latency statistics.
402 lcoreid_t latencystats_lcore_id = -1;
407 * Ethernet device configuration.
409 struct rte_eth_rxmode rx_mode = {
410 .max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
413 struct rte_eth_txmode tx_mode = {
414 .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
417 struct rte_fdir_conf fdir_conf = {
418 .mode = RTE_FDIR_MODE_NONE,
419 .pballoc = RTE_FDIR_PBALLOC_64K,
420 .status = RTE_FDIR_REPORT_STATUS,
422 .vlan_tci_mask = 0xFFEF,
424 .src_ip = 0xFFFFFFFF,
425 .dst_ip = 0xFFFFFFFF,
428 .src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
429 .dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
431 .src_port_mask = 0xFFFF,
432 .dst_port_mask = 0xFFFF,
433 .mac_addr_byte_mask = 0xFF,
434 .tunnel_type_mask = 1,
435 .tunnel_id_mask = 0xFFFFFFFF,
440 volatile int test_done = 1; /* stop packet forwarding when set to 1. */
442 struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
443 struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
445 struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array;
446 struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array;
448 uint16_t nb_tx_queue_stats_mappings = 0;
449 uint16_t nb_rx_queue_stats_mappings = 0;
452 * Display zero values by default for xstats
454 uint8_t xstats_hide_zero;
456 unsigned int num_sockets = 0;
457 unsigned int socket_ids[RTE_MAX_NUMA_NODES];
459 #ifdef RTE_LIBRTE_BITRATE
460 /* Bitrate statistics */
461 struct rte_stats_bitrates *bitrate_data;
462 lcoreid_t bitrate_lcore_id;
463 uint8_t bitrate_enabled;
466 struct gro_status gro_ports[RTE_MAX_ETHPORTS];
467 uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
469 struct vxlan_encap_conf vxlan_encap_conf = {
472 .vni = "\x00\x00\x00",
474 .udp_dst = RTE_BE16(4789),
475 .ipv4_src = IPv4(127, 0, 0, 1),
476 .ipv4_dst = IPv4(255, 255, 255, 255),
477 .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
478 "\x00\x00\x00\x00\x00\x00\x00\x01",
479 .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
480 "\x00\x00\x00\x00\x00\x00\x11\x11",
482 .eth_src = "\x00\x00\x00\x00\x00\x00",
483 .eth_dst = "\xff\xff\xff\xff\xff\xff",
486 struct nvgre_encap_conf nvgre_encap_conf = {
489 .tni = "\x00\x00\x00",
490 .ipv4_src = IPv4(127, 0, 0, 1),
491 .ipv4_dst = IPv4(255, 255, 255, 255),
492 .ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
493 "\x00\x00\x00\x00\x00\x00\x00\x01",
494 .ipv6_dst = "\x00\x00\x00\x00\x00\x00\x00\x00"
495 "\x00\x00\x00\x00\x00\x00\x11\x11",
497 .eth_src = "\x00\x00\x00\x00\x00\x00",
498 .eth_dst = "\xff\xff\xff\xff\xff\xff",
501 /* Forward function declarations */
502 static void setup_attached_port(portid_t pi);
503 static void map_port_queue_stats_mapping_registers(portid_t pi,
504 struct rte_port *port);
505 static void check_all_ports_link_status(uint32_t port_mask);
506 static int eth_event_callback(portid_t port_id,
507 enum rte_eth_event_type type,
508 void *param, void *ret_param);
509 static void dev_event_callback(const char *device_name,
510 enum rte_dev_event_type type,
514 * Check if all the ports are started.
515 * If yes, return positive value. If not, return zero.
517 static int all_ports_started(void);
519 struct gso_status gso_ports[RTE_MAX_ETHPORTS];
520 uint16_t gso_max_segment_size = ETHER_MAX_LEN - ETHER_CRC_LEN;
523 * Helper function to check if socket is already discovered.
524 * If yes, return positive value. If not, return zero.
527 new_socket_id(unsigned int socket_id)
531 for (i = 0; i < num_sockets; i++) {
532 if (socket_ids[i] == socket_id)
539 * Setup default configuration.
542 set_default_fwd_lcores_config(void)
546 unsigned int sock_num;
549 for (i = 0; i < RTE_MAX_LCORE; i++) {
550 if (!rte_lcore_is_enabled(i))
552 sock_num = rte_lcore_to_socket_id(i);
553 if (new_socket_id(sock_num)) {
554 if (num_sockets >= RTE_MAX_NUMA_NODES) {
555 rte_exit(EXIT_FAILURE,
556 "Total sockets greater than %u\n",
559 socket_ids[num_sockets++] = sock_num;
561 if (i == rte_get_master_lcore())
563 fwd_lcores_cpuids[nb_lc++] = i;
565 nb_lcores = (lcoreid_t) nb_lc;
566 nb_cfg_lcores = nb_lcores;
571 set_def_peer_eth_addrs(void)
575 for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
576 peer_eth_addrs[i].addr_bytes[0] = ETHER_LOCAL_ADMIN_ADDR;
577 peer_eth_addrs[i].addr_bytes[5] = i;
582 set_default_fwd_ports_config(void)
587 RTE_ETH_FOREACH_DEV(pt_id) {
588 fwd_ports_ids[i++] = pt_id;
590 /* Update sockets info according to the attached device */
591 int socket_id = rte_eth_dev_socket_id(pt_id);
592 if (socket_id >= 0 && new_socket_id(socket_id)) {
593 if (num_sockets >= RTE_MAX_NUMA_NODES) {
594 rte_exit(EXIT_FAILURE,
595 "Total sockets greater than %u\n",
598 socket_ids[num_sockets++] = socket_id;
602 nb_cfg_ports = nb_ports;
603 nb_fwd_ports = nb_ports;
607 set_def_fwd_config(void)
609 set_default_fwd_lcores_config();
610 set_def_peer_eth_addrs();
611 set_default_fwd_ports_config();
614 /* extremely pessimistic estimation of memory required to create a mempool */
616 calc_mem_size(uint32_t nb_mbufs, uint32_t mbuf_sz, size_t pgsz, size_t *out)
618 unsigned int n_pages, mbuf_per_pg, leftover;
619 uint64_t total_mem, mbuf_mem, obj_sz;
621 /* there is no good way to predict how much space the mempool will
622 * occupy because it will allocate chunks on the fly, and some of those
623 * will come from default DPDK memory while some will come from our
624 * external memory, so just assume 128MB will be enough for everyone.
626 uint64_t hdr_mem = 128 << 20;
628 /* account for possible non-contiguousness */
629 obj_sz = rte_mempool_calc_obj_size(mbuf_sz, 0, NULL);
631 TESTPMD_LOG(ERR, "Object size is bigger than page size\n");
635 mbuf_per_pg = pgsz / obj_sz;
636 leftover = (nb_mbufs % mbuf_per_pg) > 0;
637 n_pages = (nb_mbufs / mbuf_per_pg) + leftover;
639 mbuf_mem = n_pages * pgsz;
641 total_mem = RTE_ALIGN(hdr_mem + mbuf_mem, pgsz);
643 if (total_mem > SIZE_MAX) {
644 TESTPMD_LOG(ERR, "Memory size too big\n");
647 *out = (size_t)total_mem;
653 pagesz_flags(uint64_t page_sz)
655 /* as per mmap() manpage, all page sizes are log2 of page size
656 * shifted by MAP_HUGE_SHIFT
658 int log2 = rte_log2_u64(page_sz);
660 return (log2 << HUGE_SHIFT);
664 alloc_mem(size_t memsz, size_t pgsz, bool huge)
669 /* allocate anonymous hugepages */
670 flags = MAP_ANONYMOUS | MAP_PRIVATE;
672 flags |= HUGE_FLAG | pagesz_flags(pgsz);
674 addr = mmap(NULL, memsz, PROT_READ | PROT_WRITE, flags, -1, 0);
675 if (addr == MAP_FAILED)
681 struct extmem_param {
685 rte_iova_t *iova_table;
686 unsigned int iova_table_len;
690 create_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, struct extmem_param *param,
693 uint64_t pgsizes[] = {RTE_PGSIZE_2M, RTE_PGSIZE_1G, /* x86_64, ARM */
694 RTE_PGSIZE_16M, RTE_PGSIZE_16G}; /* POWER */
695 unsigned int cur_page, n_pages, pgsz_idx;
696 size_t mem_sz, cur_pgsz;
697 rte_iova_t *iovas = NULL;
701 for (pgsz_idx = 0; pgsz_idx < RTE_DIM(pgsizes); pgsz_idx++) {
702 /* skip anything that is too big */
703 if (pgsizes[pgsz_idx] > SIZE_MAX)
706 cur_pgsz = pgsizes[pgsz_idx];
708 /* if we were told not to allocate hugepages, override */
710 cur_pgsz = sysconf(_SC_PAGESIZE);
712 ret = calc_mem_size(nb_mbufs, mbuf_sz, cur_pgsz, &mem_sz);
714 TESTPMD_LOG(ERR, "Cannot calculate memory size\n");
718 /* allocate our memory */
719 addr = alloc_mem(mem_sz, cur_pgsz, huge);
721 /* if we couldn't allocate memory with a specified page size,
722 * that doesn't mean we can't do it with other page sizes, so
728 /* store IOVA addresses for every page in this memory area */
729 n_pages = mem_sz / cur_pgsz;
731 iovas = malloc(sizeof(*iovas) * n_pages);
734 TESTPMD_LOG(ERR, "Cannot allocate memory for iova addresses\n");
737 /* lock memory if it's not huge pages */
741 /* populate IOVA addresses */
742 for (cur_page = 0; cur_page < n_pages; cur_page++) {
747 offset = cur_pgsz * cur_page;
748 cur = RTE_PTR_ADD(addr, offset);
750 /* touch the page before getting its IOVA */
751 *(volatile char *)cur = 0;
753 iova = rte_mem_virt2iova(cur);
755 iovas[cur_page] = iova;
760 /* if we couldn't allocate anything */
766 param->pgsz = cur_pgsz;
767 param->iova_table = iovas;
768 param->iova_table_len = n_pages;
775 munmap(addr, mem_sz);
781 setup_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, bool huge)
783 struct extmem_param param;
786 memset(¶m, 0, sizeof(param));
788 /* check if our heap exists */
789 socket_id = rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME);
791 /* create our heap */
792 ret = rte_malloc_heap_create(EXTMEM_HEAP_NAME);
794 TESTPMD_LOG(ERR, "Cannot create heap\n");
799 ret = create_extmem(nb_mbufs, mbuf_sz, ¶m, huge);
801 TESTPMD_LOG(ERR, "Cannot create memory area\n");
805 /* we now have a valid memory area, so add it to heap */
806 ret = rte_malloc_heap_memory_add(EXTMEM_HEAP_NAME,
807 param.addr, param.len, param.iova_table,
808 param.iova_table_len, param.pgsz);
810 /* when using VFIO, memory is automatically mapped for DMA by EAL */
812 /* not needed any more */
813 free(param.iova_table);
816 TESTPMD_LOG(ERR, "Cannot add memory to heap\n");
817 munmap(param.addr, param.len);
823 TESTPMD_LOG(DEBUG, "Allocated %zuMB of external memory\n",
830 * Configuration initialisation done once at init time.
833 mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
834 unsigned int socket_id)
836 char pool_name[RTE_MEMPOOL_NAMESIZE];
837 struct rte_mempool *rte_mp = NULL;
840 mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
841 mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
844 "create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
845 pool_name, nb_mbuf, mbuf_seg_size, socket_id);
847 switch (mp_alloc_type) {
848 case MP_ALLOC_NATIVE:
850 /* wrapper to rte_mempool_create() */
851 TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
852 rte_mbuf_best_mempool_ops());
853 rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
854 mb_mempool_cache, 0, mbuf_seg_size, socket_id);
859 rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
860 mb_size, (unsigned int) mb_mempool_cache,
861 sizeof(struct rte_pktmbuf_pool_private),
866 if (rte_mempool_populate_anon(rte_mp) == 0) {
867 rte_mempool_free(rte_mp);
871 rte_pktmbuf_pool_init(rte_mp, NULL);
872 rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
876 case MP_ALLOC_XMEM_HUGE:
879 bool huge = mp_alloc_type == MP_ALLOC_XMEM_HUGE;
881 if (setup_extmem(nb_mbuf, mbuf_seg_size, huge) < 0)
882 rte_exit(EXIT_FAILURE, "Could not create external memory\n");
885 rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME);
887 rte_exit(EXIT_FAILURE, "Could not get external memory socket ID\n");
889 TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
890 rte_mbuf_best_mempool_ops());
891 rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
892 mb_mempool_cache, 0, mbuf_seg_size,
898 rte_exit(EXIT_FAILURE, "Invalid mempool creation mode\n");
903 if (rte_mp == NULL) {
904 rte_exit(EXIT_FAILURE,
905 "Creation of mbuf pool for socket %u failed: %s\n",
906 socket_id, rte_strerror(rte_errno));
907 } else if (verbose_level > 0) {
908 rte_mempool_dump(stdout, rte_mp);
913 * Check given socket id is valid or not with NUMA mode,
914 * if valid, return 0, else return -1
917 check_socket_id(const unsigned int socket_id)
919 static int warning_once = 0;
921 if (new_socket_id(socket_id)) {
922 if (!warning_once && numa_support)
923 printf("Warning: NUMA should be configured manually by"
924 " using --port-numa-config and"
925 " --ring-numa-config parameters along with"
934 * Get the allowed maximum number of RX queues.
935 * *pid return the port id which has minimal value of
936 * max_rx_queues in all ports.
939 get_allowed_max_nb_rxq(portid_t *pid)
941 queueid_t allowed_max_rxq = MAX_QUEUE_ID;
943 struct rte_eth_dev_info dev_info;
945 RTE_ETH_FOREACH_DEV(pi) {
946 rte_eth_dev_info_get(pi, &dev_info);
947 if (dev_info.max_rx_queues < allowed_max_rxq) {
948 allowed_max_rxq = dev_info.max_rx_queues;
952 return allowed_max_rxq;
956 * Check input rxq is valid or not.
957 * If input rxq is not greater than any of maximum number
958 * of RX queues of all ports, it is valid.
959 * if valid, return 0, else return -1
962 check_nb_rxq(queueid_t rxq)
964 queueid_t allowed_max_rxq;
967 allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
968 if (rxq > allowed_max_rxq) {
969 printf("Fail: input rxq (%u) can't be greater "
970 "than max_rx_queues (%u) of port %u\n",
980 * Get the allowed maximum number of TX queues.
981 * *pid return the port id which has minimal value of
982 * max_tx_queues in all ports.
985 get_allowed_max_nb_txq(portid_t *pid)
987 queueid_t allowed_max_txq = MAX_QUEUE_ID;
989 struct rte_eth_dev_info dev_info;
991 RTE_ETH_FOREACH_DEV(pi) {
992 rte_eth_dev_info_get(pi, &dev_info);
993 if (dev_info.max_tx_queues < allowed_max_txq) {
994 allowed_max_txq = dev_info.max_tx_queues;
998 return allowed_max_txq;
1002 * Check input txq is valid or not.
1003 * If input txq is not greater than any of maximum number
1004 * of TX queues of all ports, it is valid.
1005 * if valid, return 0, else return -1
1008 check_nb_txq(queueid_t txq)
1010 queueid_t allowed_max_txq;
1013 allowed_max_txq = get_allowed_max_nb_txq(&pid);
1014 if (txq > allowed_max_txq) {
1015 printf("Fail: input txq (%u) can't be greater "
1016 "than max_tx_queues (%u) of port %u\n",
1029 struct rte_port *port;
1030 struct rte_mempool *mbp;
1031 unsigned int nb_mbuf_per_pool;
1033 uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
1034 struct rte_gro_param gro_param;
1038 memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
1040 /* Configuration of logical cores. */
1041 fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
1042 sizeof(struct fwd_lcore *) * nb_lcores,
1043 RTE_CACHE_LINE_SIZE);
1044 if (fwd_lcores == NULL) {
1045 rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_lcore *)) "
1046 "failed\n", nb_lcores);
1048 for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
1049 fwd_lcores[lc_id] = rte_zmalloc("testpmd: struct fwd_lcore",
1050 sizeof(struct fwd_lcore),
1051 RTE_CACHE_LINE_SIZE);
1052 if (fwd_lcores[lc_id] == NULL) {
1053 rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_lcore) "
1056 fwd_lcores[lc_id]->cpuid_idx = lc_id;
1059 RTE_ETH_FOREACH_DEV(pid) {
1061 /* Apply default TxRx configuration for all ports */
1062 port->dev_conf.txmode = tx_mode;
1063 port->dev_conf.rxmode = rx_mode;
1064 rte_eth_dev_info_get(pid, &port->dev_info);
1066 if (!(port->dev_info.tx_offload_capa &
1067 DEV_TX_OFFLOAD_MBUF_FAST_FREE))
1068 port->dev_conf.txmode.offloads &=
1069 ~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
1070 if (!(port->dev_info.tx_offload_capa &
1071 DEV_TX_OFFLOAD_MATCH_METADATA))
1072 port->dev_conf.txmode.offloads &=
1073 ~DEV_TX_OFFLOAD_MATCH_METADATA;
1075 if (port_numa[pid] != NUMA_NO_CONFIG)
1076 port_per_socket[port_numa[pid]]++;
1078 uint32_t socket_id = rte_eth_dev_socket_id(pid);
1081 * if socket_id is invalid,
1082 * set to the first available socket.
1084 if (check_socket_id(socket_id) < 0)
1085 socket_id = socket_ids[0];
1086 port_per_socket[socket_id]++;
1090 /* Apply Rx offloads configuration */
1091 for (k = 0; k < port->dev_info.max_rx_queues; k++)
1092 port->rx_conf[k].offloads =
1093 port->dev_conf.rxmode.offloads;
1094 /* Apply Tx offloads configuration */
1095 for (k = 0; k < port->dev_info.max_tx_queues; k++)
1096 port->tx_conf[k].offloads =
1097 port->dev_conf.txmode.offloads;
1099 /* set flag to initialize port/queue */
1100 port->need_reconfig = 1;
1101 port->need_reconfig_queues = 1;
1102 port->tx_metadata = 0;
1106 * Create pools of mbuf.
1107 * If NUMA support is disabled, create a single pool of mbuf in
1108 * socket 0 memory by default.
1109 * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
1111 * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
1112 * nb_txd can be configured at run time.
1114 if (param_total_num_mbufs)
1115 nb_mbuf_per_pool = param_total_num_mbufs;
1117 nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
1118 (nb_lcores * mb_mempool_cache) +
1119 RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
1120 nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
1126 for (i = 0; i < num_sockets; i++)
1127 mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
1130 if (socket_num == UMA_NO_CONFIG)
1131 mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
1133 mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
1139 gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
1140 DEV_TX_OFFLOAD_GRE_TNL_TSO | DEV_TX_OFFLOAD_UDP_TSO;
1142 * Records which Mbuf pool to use by each logical core, if needed.
1144 for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
1145 mbp = mbuf_pool_find(
1146 rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]));
1149 mbp = mbuf_pool_find(0);
1150 fwd_lcores[lc_id]->mbp = mbp;
1151 /* initialize GSO context */
1152 fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
1153 fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp;
1154 fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types;
1155 fwd_lcores[lc_id]->gso_ctx.gso_size = ETHER_MAX_LEN -
1157 fwd_lcores[lc_id]->gso_ctx.flag = 0;
1160 /* Configuration of packet forwarding streams. */
1161 if (init_fwd_streams() < 0)
1162 rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
1166 /* create a gro context for each lcore */
1167 gro_param.gro_types = RTE_GRO_TCP_IPV4;
1168 gro_param.max_flow_num = GRO_MAX_FLUSH_CYCLES;
1169 gro_param.max_item_per_flow = MAX_PKT_BURST;
1170 for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
1171 gro_param.socket_id = rte_lcore_to_socket_id(
1172 fwd_lcores_cpuids[lc_id]);
1173 fwd_lcores[lc_id]->gro_ctx = rte_gro_ctx_create(&gro_param);
1174 if (fwd_lcores[lc_id]->gro_ctx == NULL) {
1175 rte_exit(EXIT_FAILURE,
1176 "rte_gro_ctx_create() failed\n");
1180 #if defined RTE_LIBRTE_PMD_SOFTNIC
1181 if (strcmp(cur_fwd_eng->fwd_mode_name, "softnic") == 0) {
1182 RTE_ETH_FOREACH_DEV(pid) {
1184 const char *driver = port->dev_info.driver_name;
1186 if (strcmp(driver, "net_softnic") == 0)
1187 port->softport.fwd_lcore_arg = fwd_lcores;
1196 reconfig(portid_t new_port_id, unsigned socket_id)
1198 struct rte_port *port;
1200 /* Reconfiguration of Ethernet ports. */
1201 port = &ports[new_port_id];
1202 rte_eth_dev_info_get(new_port_id, &port->dev_info);
1204 /* set flag to initialize port/queue */
1205 port->need_reconfig = 1;
1206 port->need_reconfig_queues = 1;
1207 port->socket_id = socket_id;
1214 init_fwd_streams(void)
1217 struct rte_port *port;
1218 streamid_t sm_id, nb_fwd_streams_new;
1221 /* set socket id according to numa or not */
1222 RTE_ETH_FOREACH_DEV(pid) {
1224 if (nb_rxq > port->dev_info.max_rx_queues) {
1225 printf("Fail: nb_rxq(%d) is greater than "
1226 "max_rx_queues(%d)\n", nb_rxq,
1227 port->dev_info.max_rx_queues);
1230 if (nb_txq > port->dev_info.max_tx_queues) {
1231 printf("Fail: nb_txq(%d) is greater than "
1232 "max_tx_queues(%d)\n", nb_txq,
1233 port->dev_info.max_tx_queues);
1237 if (port_numa[pid] != NUMA_NO_CONFIG)
1238 port->socket_id = port_numa[pid];
1240 port->socket_id = rte_eth_dev_socket_id(pid);
1243 * if socket_id is invalid,
1244 * set to the first available socket.
1246 if (check_socket_id(port->socket_id) < 0)
1247 port->socket_id = socket_ids[0];
1251 if (socket_num == UMA_NO_CONFIG)
1252 port->socket_id = 0;
1254 port->socket_id = socket_num;
1258 q = RTE_MAX(nb_rxq, nb_txq);
1260 printf("Fail: Cannot allocate fwd streams as number of queues is 0\n");
1263 nb_fwd_streams_new = (streamid_t)(nb_ports * q);
1264 if (nb_fwd_streams_new == nb_fwd_streams)
1267 if (fwd_streams != NULL) {
1268 for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
1269 if (fwd_streams[sm_id] == NULL)
1271 rte_free(fwd_streams[sm_id]);
1272 fwd_streams[sm_id] = NULL;
1274 rte_free(fwd_streams);
1279 nb_fwd_streams = nb_fwd_streams_new;
1280 if (nb_fwd_streams) {
1281 fwd_streams = rte_zmalloc("testpmd: fwd_streams",
1282 sizeof(struct fwd_stream *) * nb_fwd_streams,
1283 RTE_CACHE_LINE_SIZE);
1284 if (fwd_streams == NULL)
1285 rte_exit(EXIT_FAILURE, "rte_zmalloc(%d"
1286 " (struct fwd_stream *)) failed\n",
1289 for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
1290 fwd_streams[sm_id] = rte_zmalloc("testpmd:"
1291 " struct fwd_stream", sizeof(struct fwd_stream),
1292 RTE_CACHE_LINE_SIZE);
1293 if (fwd_streams[sm_id] == NULL)
1294 rte_exit(EXIT_FAILURE, "rte_zmalloc"
1295 "(struct fwd_stream) failed\n");
1302 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
1304 pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
1306 unsigned int total_burst;
1307 unsigned int nb_burst;
1308 unsigned int burst_stats[3];
1309 uint16_t pktnb_stats[3];
1311 int burst_percent[3];
1314 * First compute the total number of packet bursts and the
1315 * two highest numbers of bursts of the same number of packets.
1318 burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;
1319 pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;
1320 for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
1321 nb_burst = pbs->pkt_burst_spread[nb_pkt];
1324 total_burst += nb_burst;
1325 if (nb_burst > burst_stats[0]) {
1326 burst_stats[1] = burst_stats[0];
1327 pktnb_stats[1] = pktnb_stats[0];
1328 burst_stats[0] = nb_burst;
1329 pktnb_stats[0] = nb_pkt;
1330 } else if (nb_burst > burst_stats[1]) {
1331 burst_stats[1] = nb_burst;
1332 pktnb_stats[1] = nb_pkt;
1335 if (total_burst == 0)
1337 burst_percent[0] = (burst_stats[0] * 100) / total_burst;
1338 printf(" %s-bursts : %u [%d%% of %d pkts", rx_tx, total_burst,
1339 burst_percent[0], (int) pktnb_stats[0]);
1340 if (burst_stats[0] == total_burst) {
1344 if (burst_stats[0] + burst_stats[1] == total_burst) {
1345 printf(" + %d%% of %d pkts]\n",
1346 100 - burst_percent[0], pktnb_stats[1]);
1349 burst_percent[1] = (burst_stats[1] * 100) / total_burst;
1350 burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]);
1351 if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) {
1352 printf(" + %d%% of others]\n", 100 - burst_percent[0]);
1355 printf(" + %d%% of %d pkts + %d%% of others]\n",
1356 burst_percent[1], (int) pktnb_stats[1], burst_percent[2]);
1358 #endif /* RTE_TEST_PMD_RECORD_BURST_STATS */
1361 fwd_port_stats_display(portid_t port_id, struct rte_eth_stats *stats)
1363 struct rte_port *port;
1366 static const char *fwd_stats_border = "----------------------";
1368 port = &ports[port_id];
1369 printf("\n %s Forward statistics for port %-2d %s\n",
1370 fwd_stats_border, port_id, fwd_stats_border);
1372 if ((!port->rx_queue_stats_mapping_enabled) && (!port->tx_queue_stats_mapping_enabled)) {
1373 printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
1375 stats->ipackets, stats->imissed,
1376 (uint64_t) (stats->ipackets + stats->imissed));
1378 if (cur_fwd_eng == &csum_fwd_engine)
1379 printf(" Bad-ipcsum: %-14"PRIu64" Bad-l4csum: %-14"PRIu64"Bad-outer-l4csum: %-14"PRIu64"\n",
1380 port->rx_bad_ip_csum, port->rx_bad_l4_csum,
1381 port->rx_bad_outer_l4_csum);
1382 if ((stats->ierrors + stats->rx_nombuf) > 0) {
1383 printf(" RX-error: %-"PRIu64"\n", stats->ierrors);
1384 printf(" RX-nombufs: %-14"PRIu64"\n", stats->rx_nombuf);
1387 printf(" TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
1389 stats->opackets, port->tx_dropped,
1390 (uint64_t) (stats->opackets + port->tx_dropped));
1393 printf(" RX-packets: %14"PRIu64" RX-dropped:%14"PRIu64" RX-total:"
1395 stats->ipackets, stats->imissed,
1396 (uint64_t) (stats->ipackets + stats->imissed));
1398 if (cur_fwd_eng == &csum_fwd_engine)
1399 printf(" Bad-ipcsum:%14"PRIu64" Bad-l4csum:%14"PRIu64" Bad-outer-l4csum: %-14"PRIu64"\n",
1400 port->rx_bad_ip_csum, port->rx_bad_l4_csum,
1401 port->rx_bad_outer_l4_csum);
1402 if ((stats->ierrors + stats->rx_nombuf) > 0) {
1403 printf(" RX-error:%"PRIu64"\n", stats->ierrors);
1404 printf(" RX-nombufs: %14"PRIu64"\n",
1408 printf(" TX-packets: %14"PRIu64" TX-dropped:%14"PRIu64" TX-total:"
1410 stats->opackets, port->tx_dropped,
1411 (uint64_t) (stats->opackets + port->tx_dropped));
1414 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
1415 if (port->rx_stream)
1416 pkt_burst_stats_display("RX",
1417 &port->rx_stream->rx_burst_stats);
1418 if (port->tx_stream)
1419 pkt_burst_stats_display("TX",
1420 &port->tx_stream->tx_burst_stats);
1423 if (port->rx_queue_stats_mapping_enabled) {
1425 for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
1426 printf(" Stats reg %2d RX-packets:%14"PRIu64
1427 " RX-errors:%14"PRIu64
1428 " RX-bytes:%14"PRIu64"\n",
1429 i, stats->q_ipackets[i], stats->q_errors[i], stats->q_ibytes[i]);
1433 if (port->tx_queue_stats_mapping_enabled) {
1434 for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
1435 printf(" Stats reg %2d TX-packets:%14"PRIu64
1436 " TX-bytes:%14"PRIu64"\n",
1437 i, stats->q_opackets[i], stats->q_obytes[i]);
1441 printf(" %s--------------------------------%s\n",
1442 fwd_stats_border, fwd_stats_border);
1446 fwd_stream_stats_display(streamid_t stream_id)
1448 struct fwd_stream *fs;
1449 static const char *fwd_top_stats_border = "-------";
1451 fs = fwd_streams[stream_id];
1452 if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
1453 (fs->fwd_dropped == 0))
1455 printf("\n %s Forward Stats for RX Port=%2d/Queue=%2d -> "
1456 "TX Port=%2d/Queue=%2d %s\n",
1457 fwd_top_stats_border, fs->rx_port, fs->rx_queue,
1458 fs->tx_port, fs->tx_queue, fwd_top_stats_border);
1459 printf(" RX-packets: %-14u TX-packets: %-14u TX-dropped: %-14u",
1460 fs->rx_packets, fs->tx_packets, fs->fwd_dropped);
1462 /* if checksum mode */
1463 if (cur_fwd_eng == &csum_fwd_engine) {
1464 printf(" RX- bad IP checksum: %-14u Rx- bad L4 checksum: "
1465 "%-14u Rx- bad outer L4 checksum: %-14u\n",
1466 fs->rx_bad_ip_csum, fs->rx_bad_l4_csum,
1467 fs->rx_bad_outer_l4_csum);
1470 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
1471 pkt_burst_stats_display("RX", &fs->rx_burst_stats);
1472 pkt_burst_stats_display("TX", &fs->tx_burst_stats);
1477 flush_fwd_rx_queues(void)
1479 struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
1486 uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
1487 uint64_t timer_period;
1489 /* convert to number of cycles */
1490 timer_period = rte_get_timer_hz(); /* 1 second timeout */
1492 for (j = 0; j < 2; j++) {
1493 for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
1494 for (rxq = 0; rxq < nb_rxq; rxq++) {
1495 port_id = fwd_ports_ids[rxp];
1497 * testpmd can stuck in the below do while loop
1498 * if rte_eth_rx_burst() always returns nonzero
1499 * packets. So timer is added to exit this loop
1500 * after 1sec timer expiry.
1502 prev_tsc = rte_rdtsc();
1504 nb_rx = rte_eth_rx_burst(port_id, rxq,
1505 pkts_burst, MAX_PKT_BURST);
1506 for (i = 0; i < nb_rx; i++)
1507 rte_pktmbuf_free(pkts_burst[i]);
1509 cur_tsc = rte_rdtsc();
1510 diff_tsc = cur_tsc - prev_tsc;
1511 timer_tsc += diff_tsc;
1512 } while ((nb_rx > 0) &&
1513 (timer_tsc < timer_period));
1517 rte_delay_ms(10); /* wait 10 milli-seconds before retrying */
1522 run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
1524 struct fwd_stream **fsm;
1527 #ifdef RTE_LIBRTE_BITRATE
1528 uint64_t tics_per_1sec;
1529 uint64_t tics_datum;
1530 uint64_t tics_current;
1531 uint16_t i, cnt_ports;
1533 cnt_ports = nb_ports;
1534 tics_datum = rte_rdtsc();
1535 tics_per_1sec = rte_get_timer_hz();
1537 fsm = &fwd_streams[fc->stream_idx];
1538 nb_fs = fc->stream_nb;
1540 for (sm_id = 0; sm_id < nb_fs; sm_id++)
1541 (*pkt_fwd)(fsm[sm_id]);
1542 #ifdef RTE_LIBRTE_BITRATE
1543 if (bitrate_enabled != 0 &&
1544 bitrate_lcore_id == rte_lcore_id()) {
1545 tics_current = rte_rdtsc();
1546 if (tics_current - tics_datum >= tics_per_1sec) {
1547 /* Periodic bitrate calculation */
1548 for (i = 0; i < cnt_ports; i++)
1549 rte_stats_bitrate_calc(bitrate_data,
1551 tics_datum = tics_current;
1555 #ifdef RTE_LIBRTE_LATENCY_STATS
1556 if (latencystats_enabled != 0 &&
1557 latencystats_lcore_id == rte_lcore_id())
1558 rte_latencystats_update();
1561 } while (! fc->stopped);
1565 start_pkt_forward_on_core(void *fwd_arg)
1567 run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg,
1568 cur_fwd_config.fwd_eng->packet_fwd);
1573 * Run the TXONLY packet forwarding engine to send a single burst of packets.
1574 * Used to start communication flows in network loopback test configurations.
1577 run_one_txonly_burst_on_core(void *fwd_arg)
1579 struct fwd_lcore *fwd_lc;
1580 struct fwd_lcore tmp_lcore;
1582 fwd_lc = (struct fwd_lcore *) fwd_arg;
1583 tmp_lcore = *fwd_lc;
1584 tmp_lcore.stopped = 1;
1585 run_pkt_fwd_on_lcore(&tmp_lcore, tx_only_engine.packet_fwd);
1590 * Launch packet forwarding:
1591 * - Setup per-port forwarding context.
1592 * - launch logical cores with their forwarding configuration.
1595 launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore)
1597 port_fwd_begin_t port_fwd_begin;
1602 port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin;
1603 if (port_fwd_begin != NULL) {
1604 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
1605 (*port_fwd_begin)(fwd_ports_ids[i]);
1607 for (i = 0; i < cur_fwd_config.nb_fwd_lcores; i++) {
1608 lc_id = fwd_lcores_cpuids[i];
1609 if ((interactive == 0) || (lc_id != rte_lcore_id())) {
1610 fwd_lcores[i]->stopped = 0;
1611 diag = rte_eal_remote_launch(pkt_fwd_on_lcore,
1612 fwd_lcores[i], lc_id);
1614 printf("launch lcore %u failed - diag=%d\n",
1621 * Launch packet forwarding configuration.
1624 start_packet_forwarding(int with_tx_first)
1626 port_fwd_begin_t port_fwd_begin;
1627 port_fwd_end_t port_fwd_end;
1628 struct rte_port *port;
1633 if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq)
1634 rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n");
1636 if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 && !nb_txq)
1637 rte_exit(EXIT_FAILURE, "txq are 0, cannot use txonly fwd mode\n");
1639 if ((strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") != 0 &&
1640 strcmp(cur_fwd_eng->fwd_mode_name, "txonly") != 0) &&
1641 (!nb_rxq || !nb_txq))
1642 rte_exit(EXIT_FAILURE,
1643 "Either rxq or txq are 0, cannot use %s fwd mode\n",
1644 cur_fwd_eng->fwd_mode_name);
1646 if (all_ports_started() == 0) {
1647 printf("Not all ports were started\n");
1650 if (test_done == 0) {
1651 printf("Packet forwarding already started\n");
1657 for (i = 0; i < nb_fwd_ports; i++) {
1658 pt_id = fwd_ports_ids[i];
1659 port = &ports[pt_id];
1660 if (!port->dcb_flag) {
1661 printf("In DCB mode, all forwarding ports must "
1662 "be configured in this mode.\n");
1666 if (nb_fwd_lcores == 1) {
1667 printf("In DCB mode,the nb forwarding cores "
1668 "should be larger than 1.\n");
1677 flush_fwd_rx_queues();
1679 pkt_fwd_config_display(&cur_fwd_config);
1680 rxtx_config_display();
1682 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
1683 pt_id = fwd_ports_ids[i];
1684 port = &ports[pt_id];
1685 rte_eth_stats_get(pt_id, &port->stats);
1686 port->tx_dropped = 0;
1688 map_port_queue_stats_mapping_registers(pt_id, port);
1690 for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
1691 fwd_streams[sm_id]->rx_packets = 0;
1692 fwd_streams[sm_id]->tx_packets = 0;
1693 fwd_streams[sm_id]->fwd_dropped = 0;
1694 fwd_streams[sm_id]->rx_bad_ip_csum = 0;
1695 fwd_streams[sm_id]->rx_bad_l4_csum = 0;
1696 fwd_streams[sm_id]->rx_bad_outer_l4_csum = 0;
1698 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
1699 memset(&fwd_streams[sm_id]->rx_burst_stats, 0,
1700 sizeof(fwd_streams[sm_id]->rx_burst_stats));
1701 memset(&fwd_streams[sm_id]->tx_burst_stats, 0,
1702 sizeof(fwd_streams[sm_id]->tx_burst_stats));
1704 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1705 fwd_streams[sm_id]->core_cycles = 0;
1708 if (with_tx_first) {
1709 port_fwd_begin = tx_only_engine.port_fwd_begin;
1710 if (port_fwd_begin != NULL) {
1711 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
1712 (*port_fwd_begin)(fwd_ports_ids[i]);
1714 while (with_tx_first--) {
1715 launch_packet_forwarding(
1716 run_one_txonly_burst_on_core);
1717 rte_eal_mp_wait_lcore();
1719 port_fwd_end = tx_only_engine.port_fwd_end;
1720 if (port_fwd_end != NULL) {
1721 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
1722 (*port_fwd_end)(fwd_ports_ids[i]);
1725 launch_packet_forwarding(start_pkt_forward_on_core);
1729 stop_packet_forwarding(void)
1731 struct rte_eth_stats stats;
1732 struct rte_port *port;
1733 port_fwd_end_t port_fwd_end;
1738 uint64_t total_recv;
1739 uint64_t total_xmit;
1740 uint64_t total_rx_dropped;
1741 uint64_t total_tx_dropped;
1742 uint64_t total_rx_nombuf;
1743 uint64_t tx_dropped;
1744 uint64_t rx_bad_ip_csum;
1745 uint64_t rx_bad_l4_csum;
1746 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1747 uint64_t fwd_cycles;
1750 static const char *acc_stats_border = "+++++++++++++++";
1753 printf("Packet forwarding not started\n");
1756 printf("Telling cores to stop...");
1757 for (lc_id = 0; lc_id < cur_fwd_config.nb_fwd_lcores; lc_id++)
1758 fwd_lcores[lc_id]->stopped = 1;
1759 printf("\nWaiting for lcores to finish...\n");
1760 rte_eal_mp_wait_lcore();
1761 port_fwd_end = cur_fwd_config.fwd_eng->port_fwd_end;
1762 if (port_fwd_end != NULL) {
1763 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
1764 pt_id = fwd_ports_ids[i];
1765 (*port_fwd_end)(pt_id);
1768 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1771 for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
1772 if (cur_fwd_config.nb_fwd_streams >
1773 cur_fwd_config.nb_fwd_ports) {
1774 fwd_stream_stats_display(sm_id);
1775 ports[fwd_streams[sm_id]->tx_port].tx_stream = NULL;
1776 ports[fwd_streams[sm_id]->rx_port].rx_stream = NULL;
1778 ports[fwd_streams[sm_id]->tx_port].tx_stream =
1780 ports[fwd_streams[sm_id]->rx_port].rx_stream =
1783 tx_dropped = ports[fwd_streams[sm_id]->tx_port].tx_dropped;
1784 tx_dropped = (uint64_t) (tx_dropped +
1785 fwd_streams[sm_id]->fwd_dropped);
1786 ports[fwd_streams[sm_id]->tx_port].tx_dropped = tx_dropped;
1789 ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum;
1790 rx_bad_ip_csum = (uint64_t) (rx_bad_ip_csum +
1791 fwd_streams[sm_id]->rx_bad_ip_csum);
1792 ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum =
1796 ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum;
1797 rx_bad_l4_csum = (uint64_t) (rx_bad_l4_csum +
1798 fwd_streams[sm_id]->rx_bad_l4_csum);
1799 ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum =
1802 ports[fwd_streams[sm_id]->rx_port].rx_bad_outer_l4_csum +=
1803 fwd_streams[sm_id]->rx_bad_outer_l4_csum;
1805 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1806 fwd_cycles = (uint64_t) (fwd_cycles +
1807 fwd_streams[sm_id]->core_cycles);
1812 total_rx_dropped = 0;
1813 total_tx_dropped = 0;
1814 total_rx_nombuf = 0;
1815 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
1816 pt_id = fwd_ports_ids[i];
1818 port = &ports[pt_id];
1819 rte_eth_stats_get(pt_id, &stats);
1820 stats.ipackets -= port->stats.ipackets;
1821 port->stats.ipackets = 0;
1822 stats.opackets -= port->stats.opackets;
1823 port->stats.opackets = 0;
1824 stats.ibytes -= port->stats.ibytes;
1825 port->stats.ibytes = 0;
1826 stats.obytes -= port->stats.obytes;
1827 port->stats.obytes = 0;
1828 stats.imissed -= port->stats.imissed;
1829 port->stats.imissed = 0;
1830 stats.oerrors -= port->stats.oerrors;
1831 port->stats.oerrors = 0;
1832 stats.rx_nombuf -= port->stats.rx_nombuf;
1833 port->stats.rx_nombuf = 0;
1835 total_recv += stats.ipackets;
1836 total_xmit += stats.opackets;
1837 total_rx_dropped += stats.imissed;
1838 total_tx_dropped += port->tx_dropped;
1839 total_rx_nombuf += stats.rx_nombuf;
1841 fwd_port_stats_display(pt_id, &stats);
1844 printf("\n %s Accumulated forward statistics for all ports"
1846 acc_stats_border, acc_stats_border);
1847 printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
1849 " TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
1851 total_recv, total_rx_dropped, total_recv + total_rx_dropped,
1852 total_xmit, total_tx_dropped, total_xmit + total_tx_dropped);
1853 if (total_rx_nombuf > 0)
1854 printf(" RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf);
1855 printf(" %s++++++++++++++++++++++++++++++++++++++++++++++"
1857 acc_stats_border, acc_stats_border);
1858 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1860 printf("\n CPU cycles/packet=%u (total cycles="
1861 "%"PRIu64" / total RX packets=%"PRIu64")\n",
1862 (unsigned int)(fwd_cycles / total_recv),
1863 fwd_cycles, total_recv);
1865 printf("\nDone.\n");
1870 dev_set_link_up(portid_t pid)
1872 if (rte_eth_dev_set_link_up(pid) < 0)
1873 printf("\nSet link up fail.\n");
1877 dev_set_link_down(portid_t pid)
1879 if (rte_eth_dev_set_link_down(pid) < 0)
1880 printf("\nSet link down fail.\n");
1884 all_ports_started(void)
1887 struct rte_port *port;
1889 RTE_ETH_FOREACH_DEV(pi) {
1891 /* Check if there is a port which is not started */
1892 if ((port->port_status != RTE_PORT_STARTED) &&
1893 (port->slave_flag == 0))
1897 /* No port is not started */
1902 port_is_stopped(portid_t port_id)
1904 struct rte_port *port = &ports[port_id];
1906 if ((port->port_status != RTE_PORT_STOPPED) &&
1907 (port->slave_flag == 0))
1913 all_ports_stopped(void)
1917 RTE_ETH_FOREACH_DEV(pi) {
1918 if (!port_is_stopped(pi))
1926 port_is_started(portid_t port_id)
1928 if (port_id_is_invalid(port_id, ENABLED_WARN))
1931 if (ports[port_id].port_status != RTE_PORT_STARTED)
1938 start_port(portid_t pid)
1940 int diag, need_check_link_status = -1;
1943 struct rte_port *port;
1944 struct ether_addr mac_addr;
1946 if (port_id_is_invalid(pid, ENABLED_WARN))
1951 RTE_ETH_FOREACH_DEV(pi) {
1952 if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
1955 need_check_link_status = 0;
1957 if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
1958 RTE_PORT_HANDLING) == 0) {
1959 printf("Port %d is now not stopped\n", pi);
1963 if (port->need_reconfig > 0) {
1964 port->need_reconfig = 0;
1966 if (flow_isolate_all) {
1967 int ret = port_flow_isolate(pi, 1);
1969 printf("Failed to apply isolated"
1970 " mode on port %d\n", pi);
1974 configure_rxtx_dump_callbacks(0);
1975 printf("Configuring Port %d (socket %u)\n", pi,
1977 /* configure port */
1978 diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
1981 if (rte_atomic16_cmpset(&(port->port_status),
1982 RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
1983 printf("Port %d can not be set back "
1984 "to stopped\n", pi);
1985 printf("Fail to configure port %d\n", pi);
1986 /* try to reconfigure port next time */
1987 port->need_reconfig = 1;
1991 if (port->need_reconfig_queues > 0) {
1992 port->need_reconfig_queues = 0;
1993 /* setup tx queues */
1994 for (qi = 0; qi < nb_txq; qi++) {
1995 if ((numa_support) &&
1996 (txring_numa[pi] != NUMA_NO_CONFIG))
1997 diag = rte_eth_tx_queue_setup(pi, qi,
1998 port->nb_tx_desc[qi],
2000 &(port->tx_conf[qi]));
2002 diag = rte_eth_tx_queue_setup(pi, qi,
2003 port->nb_tx_desc[qi],
2005 &(port->tx_conf[qi]));
2010 /* Fail to setup tx queue, return */
2011 if (rte_atomic16_cmpset(&(port->port_status),
2013 RTE_PORT_STOPPED) == 0)
2014 printf("Port %d can not be set back "
2015 "to stopped\n", pi);
2016 printf("Fail to configure port %d tx queues\n",
2018 /* try to reconfigure queues next time */
2019 port->need_reconfig_queues = 1;
2022 for (qi = 0; qi < nb_rxq; qi++) {
2023 /* setup rx queues */
2024 if ((numa_support) &&
2025 (rxring_numa[pi] != NUMA_NO_CONFIG)) {
2026 struct rte_mempool * mp =
2027 mbuf_pool_find(rxring_numa[pi]);
2029 printf("Failed to setup RX queue:"
2030 "No mempool allocation"
2031 " on the socket %d\n",
2036 diag = rte_eth_rx_queue_setup(pi, qi,
2037 port->nb_rx_desc[qi],
2039 &(port->rx_conf[qi]),
2042 struct rte_mempool *mp =
2043 mbuf_pool_find(port->socket_id);
2045 printf("Failed to setup RX queue:"
2046 "No mempool allocation"
2047 " on the socket %d\n",
2051 diag = rte_eth_rx_queue_setup(pi, qi,
2052 port->nb_rx_desc[qi],
2054 &(port->rx_conf[qi]),
2060 /* Fail to setup rx queue, return */
2061 if (rte_atomic16_cmpset(&(port->port_status),
2063 RTE_PORT_STOPPED) == 0)
2064 printf("Port %d can not be set back "
2065 "to stopped\n", pi);
2066 printf("Fail to configure port %d rx queues\n",
2068 /* try to reconfigure queues next time */
2069 port->need_reconfig_queues = 1;
2073 configure_rxtx_dump_callbacks(verbose_level);
2075 if (rte_eth_dev_start(pi) < 0) {
2076 printf("Fail to start port %d\n", pi);
2078 /* Fail to setup rx queue, return */
2079 if (rte_atomic16_cmpset(&(port->port_status),
2080 RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
2081 printf("Port %d can not be set back to "
2086 if (rte_atomic16_cmpset(&(port->port_status),
2087 RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
2088 printf("Port %d can not be set into started\n", pi);
2090 rte_eth_macaddr_get(pi, &mac_addr);
2091 printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
2092 mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
2093 mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
2094 mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
2096 /* at least one port started, need checking link status */
2097 need_check_link_status = 1;
2100 if (need_check_link_status == 1 && !no_link_check)
2101 check_all_ports_link_status(RTE_PORT_ALL);
2102 else if (need_check_link_status == 0)
2103 printf("Please stop the ports first\n");
2110 stop_port(portid_t pid)
2113 struct rte_port *port;
2114 int need_check_link_status = 0;
2121 if (port_id_is_invalid(pid, ENABLED_WARN))
2124 printf("Stopping ports...\n");
2126 RTE_ETH_FOREACH_DEV(pi) {
2127 if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
2130 if (port_is_forwarding(pi) != 0 && test_done == 0) {
2131 printf("Please remove port %d from forwarding configuration.\n", pi);
2135 if (port_is_bonding_slave(pi)) {
2136 printf("Please remove port %d from bonded device.\n", pi);
2141 if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
2142 RTE_PORT_HANDLING) == 0)
2145 rte_eth_dev_stop(pi);
2147 if (rte_atomic16_cmpset(&(port->port_status),
2148 RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
2149 printf("Port %d can not be set into stopped\n", pi);
2150 need_check_link_status = 1;
2152 if (need_check_link_status && !no_link_check)
2153 check_all_ports_link_status(RTE_PORT_ALL);
2159 remove_invalid_ports_in(portid_t *array, portid_t *total)
2162 portid_t new_total = 0;
2164 for (i = 0; i < *total; i++)
2165 if (!port_id_is_invalid(array[i], DISABLED_WARN)) {
2166 array[new_total] = array[i];
2173 remove_invalid_ports(void)
2175 remove_invalid_ports_in(ports_ids, &nb_ports);
2176 remove_invalid_ports_in(fwd_ports_ids, &nb_fwd_ports);
2177 nb_cfg_ports = nb_fwd_ports;
2181 close_port(portid_t pid)
2184 struct rte_port *port;
2186 if (port_id_is_invalid(pid, ENABLED_WARN))
2189 printf("Closing ports...\n");
2191 RTE_ETH_FOREACH_DEV(pi) {
2192 if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
2195 if (port_is_forwarding(pi) != 0 && test_done == 0) {
2196 printf("Please remove port %d from forwarding configuration.\n", pi);
2200 if (port_is_bonding_slave(pi)) {
2201 printf("Please remove port %d from bonded device.\n", pi);
2206 if (rte_atomic16_cmpset(&(port->port_status),
2207 RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
2208 printf("Port %d is already closed\n", pi);
2212 if (rte_atomic16_cmpset(&(port->port_status),
2213 RTE_PORT_STOPPED, RTE_PORT_HANDLING) == 0) {
2214 printf("Port %d is now not stopped\n", pi);
2218 if (port->flow_list)
2219 port_flow_flush(pi);
2220 rte_eth_dev_close(pi);
2222 remove_invalid_ports();
2224 if (rte_atomic16_cmpset(&(port->port_status),
2225 RTE_PORT_HANDLING, RTE_PORT_CLOSED) == 0)
2226 printf("Port %d cannot be set to closed\n", pi);
2233 reset_port(portid_t pid)
2237 struct rte_port *port;
2239 if (port_id_is_invalid(pid, ENABLED_WARN))
2242 printf("Resetting ports...\n");
2244 RTE_ETH_FOREACH_DEV(pi) {
2245 if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
2248 if (port_is_forwarding(pi) != 0 && test_done == 0) {
2249 printf("Please remove port %d from forwarding "
2250 "configuration.\n", pi);
2254 if (port_is_bonding_slave(pi)) {
2255 printf("Please remove port %d from bonded device.\n",
2260 diag = rte_eth_dev_reset(pi);
2263 port->need_reconfig = 1;
2264 port->need_reconfig_queues = 1;
2266 printf("Failed to reset port %d. diag=%d\n", pi, diag);
2274 attach_port(char *identifier)
2277 struct rte_dev_iterator iterator;
2279 printf("Attaching a new port...\n");
2281 if (identifier == NULL) {
2282 printf("Invalid parameters are specified\n");
2286 if (rte_dev_probe(identifier) != 0) {
2287 TESTPMD_LOG(ERR, "Failed to attach port %s\n", identifier);
2291 /* first attach mode: event */
2292 if (setup_on_probe_event) {
2293 /* new ports are detected on RTE_ETH_EVENT_NEW event */
2294 for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++)
2295 if (ports[pi].port_status == RTE_PORT_HANDLING &&
2296 ports[pi].need_setup != 0)
2297 setup_attached_port(pi);
2301 /* second attach mode: iterator */
2302 RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) {
2303 /* setup ports matching the devargs used for probing */
2304 if (port_is_forwarding(pi))
2305 continue; /* port was already attached before */
2306 setup_attached_port(pi);
2311 setup_attached_port(portid_t pi)
2313 unsigned int socket_id;
2315 socket_id = (unsigned)rte_eth_dev_socket_id(pi);
2316 /* if socket_id is invalid, set to the first available socket. */
2317 if (check_socket_id(socket_id) < 0)
2318 socket_id = socket_ids[0];
2319 reconfig(pi, socket_id);
2320 rte_eth_promiscuous_enable(pi);
2322 ports_ids[nb_ports++] = pi;
2323 fwd_ports_ids[nb_fwd_ports++] = pi;
2324 nb_cfg_ports = nb_fwd_ports;
2325 ports[pi].need_setup = 0;
2326 ports[pi].port_status = RTE_PORT_STOPPED;
2328 printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
2333 detach_port_device(portid_t port_id)
2335 struct rte_device *dev;
2338 printf("Removing a device...\n");
2340 dev = rte_eth_devices[port_id].device;
2342 printf("Device already removed\n");
2346 if (ports[port_id].port_status != RTE_PORT_CLOSED) {
2347 if (ports[port_id].port_status != RTE_PORT_STOPPED) {
2348 printf("Port not stopped\n");
2351 printf("Port was not closed\n");
2352 if (ports[port_id].flow_list)
2353 port_flow_flush(port_id);
2356 if (rte_dev_remove(dev) != 0) {
2357 TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name);
2361 for (sibling = 0; sibling < RTE_MAX_ETHPORTS; sibling++) {
2362 if (rte_eth_devices[sibling].device != dev)
2364 /* reset mapping between old ports and removed device */
2365 rte_eth_devices[sibling].device = NULL;
2366 if (ports[sibling].port_status != RTE_PORT_CLOSED) {
2367 /* sibling ports are forced to be closed */
2368 ports[sibling].port_status = RTE_PORT_CLOSED;
2369 printf("Port %u is closed\n", sibling);
2373 remove_invalid_ports();
2375 printf("Device of port %u is detached\n", port_id);
2376 printf("Now total ports is %d\n", nb_ports);
2384 struct rte_device *device;
2389 stop_packet_forwarding();
2391 if (ports != NULL) {
2393 RTE_ETH_FOREACH_DEV(pt_id) {
2394 printf("\nShutting down port %d...\n", pt_id);
2400 * This is a workaround to fix a virtio-user issue that
2401 * requires to call clean-up routine to remove existing
2403 * This workaround valid only for testpmd, needs a fix
2404 * valid for all applications.
2405 * TODO: Implement proper resource cleanup
2407 device = rte_eth_devices[pt_id].device;
2408 if (device && !strcmp(device->driver->name, "net_virtio_user"))
2409 detach_port_device(pt_id);
2414 ret = rte_dev_event_monitor_stop();
2417 "fail to stop device event monitor.");
2421 ret = rte_dev_event_callback_unregister(NULL,
2422 dev_event_callback, NULL);
2425 "fail to unregister device event callback.\n");
2429 ret = rte_dev_hotplug_handle_disable();
2432 "fail to disable hotplug handling.\n");
2437 printf("\nBye...\n");
2440 typedef void (*cmd_func_t)(void);
2441 struct pmd_test_command {
2442 const char *cmd_name;
2443 cmd_func_t cmd_func;
2446 #define PMD_TEST_CMD_NB (sizeof(pmd_test_menu) / sizeof(pmd_test_menu[0]))
2448 /* Check the link status of all ports in up to 9s, and print them finally */
2450 check_all_ports_link_status(uint32_t port_mask)
2452 #define CHECK_INTERVAL 100 /* 100ms */
2453 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
2455 uint8_t count, all_ports_up, print_flag = 0;
2456 struct rte_eth_link link;
2458 printf("Checking link statuses...\n");
2460 for (count = 0; count <= MAX_CHECK_TIME; count++) {
2462 RTE_ETH_FOREACH_DEV(portid) {
2463 if ((port_mask & (1 << portid)) == 0)
2465 memset(&link, 0, sizeof(link));
2466 rte_eth_link_get_nowait(portid, &link);
2467 /* print link status if flag set */
2468 if (print_flag == 1) {
2469 if (link.link_status)
2471 "Port%d Link Up. speed %u Mbps- %s\n",
2472 portid, link.link_speed,
2473 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
2474 ("full-duplex") : ("half-duplex\n"));
2476 printf("Port %d Link Down\n", portid);
2479 /* clear all_ports_up flag if any link down */
2480 if (link.link_status == ETH_LINK_DOWN) {
2485 /* after finally printing all link status, get out */
2486 if (print_flag == 1)
2489 if (all_ports_up == 0) {
2491 rte_delay_ms(CHECK_INTERVAL);
2494 /* set the print_flag if all ports up or timeout */
2495 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
2505 * This callback is for remove a port for a device. It has limitation because
2506 * it is not for multiple port removal for a device.
2507 * TODO: the device detach invoke will plan to be removed from user side to
2508 * eal. And convert all PMDs to free port resources on ether device closing.
2511 rmv_port_callback(void *arg)
2513 int need_to_start = 0;
2514 int org_no_link_check = no_link_check;
2515 portid_t port_id = (intptr_t)arg;
2517 RTE_ETH_VALID_PORTID_OR_RET(port_id);
2519 if (!test_done && port_is_forwarding(port_id)) {
2521 stop_packet_forwarding();
2525 no_link_check = org_no_link_check;
2526 close_port(port_id);
2527 detach_port_device(port_id);
2529 start_packet_forwarding(0);
2532 /* This function is used by the interrupt thread */
2534 eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
2537 RTE_SET_USED(param);
2538 RTE_SET_USED(ret_param);
2540 if (type >= RTE_ETH_EVENT_MAX) {
2541 fprintf(stderr, "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
2542 port_id, __func__, type);
2544 } else if (event_print_mask & (UINT32_C(1) << type)) {
2545 printf("\nPort %" PRIu16 ": %s event\n", port_id,
2546 eth_event_desc[type]);
2551 case RTE_ETH_EVENT_NEW:
2552 ports[port_id].need_setup = 1;
2553 ports[port_id].port_status = RTE_PORT_HANDLING;
2555 case RTE_ETH_EVENT_INTR_RMV:
2556 if (port_id_is_invalid(port_id, DISABLED_WARN))
2558 if (rte_eal_alarm_set(100000,
2559 rmv_port_callback, (void *)(intptr_t)port_id))
2560 fprintf(stderr, "Could not set up deferred device removal\n");
2569 register_eth_event_callback(void)
2572 enum rte_eth_event_type event;
2574 for (event = RTE_ETH_EVENT_UNKNOWN;
2575 event < RTE_ETH_EVENT_MAX; event++) {
2576 ret = rte_eth_dev_callback_register(RTE_ETH_ALL,
2581 TESTPMD_LOG(ERR, "Failed to register callback for "
2582 "%s event\n", eth_event_desc[event]);
2590 /* This function is used by the interrupt thread */
2592 dev_event_callback(const char *device_name, enum rte_dev_event_type type,
2593 __rte_unused void *arg)
2598 if (type >= RTE_DEV_EVENT_MAX) {
2599 fprintf(stderr, "%s called upon invalid event %d\n",
2605 case RTE_DEV_EVENT_REMOVE:
2606 RTE_LOG(DEBUG, EAL, "The device: %s has been removed!\n",
2608 ret = rte_eth_dev_get_port_by_name(device_name, &port_id);
2610 RTE_LOG(ERR, EAL, "can not get port by device %s!\n",
2615 * Because the user's callback is invoked in eal interrupt
2616 * callback, the interrupt callback need to be finished before
2617 * it can be unregistered when detaching device. So finish
2618 * callback soon and use a deferred removal to detach device
2619 * is need. It is a workaround, once the device detaching be
2620 * moved into the eal in the future, the deferred removal could
2623 if (rte_eal_alarm_set(100000,
2624 rmv_port_callback, (void *)(intptr_t)port_id))
2626 "Could not set up deferred device removal\n");
2628 case RTE_DEV_EVENT_ADD:
2629 RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
2631 /* TODO: After finish kernel driver binding,
2632 * begin to attach port.
2641 set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
2645 uint8_t mapping_found = 0;
2647 for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
2648 if ((tx_queue_stats_mappings[i].port_id == port_id) &&
2649 (tx_queue_stats_mappings[i].queue_id < nb_txq )) {
2650 diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
2651 tx_queue_stats_mappings[i].queue_id,
2652 tx_queue_stats_mappings[i].stats_counter_id);
2659 port->tx_queue_stats_mapping_enabled = 1;
2664 set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
2668 uint8_t mapping_found = 0;
2670 for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
2671 if ((rx_queue_stats_mappings[i].port_id == port_id) &&
2672 (rx_queue_stats_mappings[i].queue_id < nb_rxq )) {
2673 diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
2674 rx_queue_stats_mappings[i].queue_id,
2675 rx_queue_stats_mappings[i].stats_counter_id);
2682 port->rx_queue_stats_mapping_enabled = 1;
2687 map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
2691 diag = set_tx_queue_stats_mapping_registers(pi, port);
2693 if (diag == -ENOTSUP) {
2694 port->tx_queue_stats_mapping_enabled = 0;
2695 printf("TX queue stats mapping not supported port id=%d\n", pi);
2698 rte_exit(EXIT_FAILURE,
2699 "set_tx_queue_stats_mapping_registers "
2700 "failed for port id=%d diag=%d\n",
2704 diag = set_rx_queue_stats_mapping_registers(pi, port);
2706 if (diag == -ENOTSUP) {
2707 port->rx_queue_stats_mapping_enabled = 0;
2708 printf("RX queue stats mapping not supported port id=%d\n", pi);
2711 rte_exit(EXIT_FAILURE,
2712 "set_rx_queue_stats_mapping_registers "
2713 "failed for port id=%d diag=%d\n",
2719 rxtx_port_config(struct rte_port *port)
2723 for (qid = 0; qid < nb_rxq; qid++) {
2724 port->rx_conf[qid] = port->dev_info.default_rxconf;
2726 /* Check if any Rx parameters have been passed */
2727 if (rx_pthresh != RTE_PMD_PARAM_UNSET)
2728 port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh;
2730 if (rx_hthresh != RTE_PMD_PARAM_UNSET)
2731 port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh;
2733 if (rx_wthresh != RTE_PMD_PARAM_UNSET)
2734 port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh;
2736 if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
2737 port->rx_conf[qid].rx_free_thresh = rx_free_thresh;
2739 if (rx_drop_en != RTE_PMD_PARAM_UNSET)
2740 port->rx_conf[qid].rx_drop_en = rx_drop_en;
2742 port->nb_rx_desc[qid] = nb_rxd;
2745 for (qid = 0; qid < nb_txq; qid++) {
2746 port->tx_conf[qid] = port->dev_info.default_txconf;
2748 /* Check if any Tx parameters have been passed */
2749 if (tx_pthresh != RTE_PMD_PARAM_UNSET)
2750 port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh;
2752 if (tx_hthresh != RTE_PMD_PARAM_UNSET)
2753 port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh;
2755 if (tx_wthresh != RTE_PMD_PARAM_UNSET)
2756 port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh;
2758 if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
2759 port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh;
2761 if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
2762 port->tx_conf[qid].tx_free_thresh = tx_free_thresh;
2764 port->nb_tx_desc[qid] = nb_txd;
2769 init_port_config(void)
2772 struct rte_port *port;
2774 RTE_ETH_FOREACH_DEV(pid) {
2776 port->dev_conf.fdir_conf = fdir_conf;
2777 rte_eth_dev_info_get(pid, &port->dev_info);
2779 port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
2780 port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
2781 rss_hf & port->dev_info.flow_type_rss_offloads;
2783 port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
2784 port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
2787 if (port->dcb_flag == 0) {
2788 if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
2789 port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
2791 port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
2794 rxtx_port_config(port);
2796 rte_eth_macaddr_get(pid, &port->eth_addr);
2798 map_port_queue_stats_mapping_registers(pid, port);
2799 #if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
2800 rte_pmd_ixgbe_bypass_init(pid);
2803 if (lsc_interrupt &&
2804 (rte_eth_devices[pid].data->dev_flags &
2805 RTE_ETH_DEV_INTR_LSC))
2806 port->dev_conf.intr_conf.lsc = 1;
2807 if (rmv_interrupt &&
2808 (rte_eth_devices[pid].data->dev_flags &
2809 RTE_ETH_DEV_INTR_RMV))
2810 port->dev_conf.intr_conf.rmv = 1;
2814 void set_port_slave_flag(portid_t slave_pid)
2816 struct rte_port *port;
2818 port = &ports[slave_pid];
2819 port->slave_flag = 1;
2822 void clear_port_slave_flag(portid_t slave_pid)
2824 struct rte_port *port;
2826 port = &ports[slave_pid];
2827 port->slave_flag = 0;
2830 uint8_t port_is_bonding_slave(portid_t slave_pid)
2832 struct rte_port *port;
2834 port = &ports[slave_pid];
2835 if ((rte_eth_devices[slave_pid].data->dev_flags &
2836 RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
2841 const uint16_t vlan_tags[] = {
2842 0, 1, 2, 3, 4, 5, 6, 7,
2843 8, 9, 10, 11, 12, 13, 14, 15,
2844 16, 17, 18, 19, 20, 21, 22, 23,
2845 24, 25, 26, 27, 28, 29, 30, 31
2849 get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf,
2850 enum dcb_mode_enable dcb_mode,
2851 enum rte_eth_nb_tcs num_tcs,
2856 struct rte_eth_rss_conf rss_conf;
2859 * Builds up the correct configuration for dcb+vt based on the vlan tags array
2860 * given above, and the number of traffic classes available for use.
2862 if (dcb_mode == DCB_VT_ENABLED) {
2863 struct rte_eth_vmdq_dcb_conf *vmdq_rx_conf =
2864 ð_conf->rx_adv_conf.vmdq_dcb_conf;
2865 struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf =
2866 ð_conf->tx_adv_conf.vmdq_dcb_tx_conf;
2868 /* VMDQ+DCB RX and TX configurations */
2869 vmdq_rx_conf->enable_default_pool = 0;
2870 vmdq_rx_conf->default_pool = 0;
2871 vmdq_rx_conf->nb_queue_pools =
2872 (num_tcs == ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
2873 vmdq_tx_conf->nb_queue_pools =
2874 (num_tcs == ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
2876 vmdq_rx_conf->nb_pool_maps = vmdq_rx_conf->nb_queue_pools;
2877 for (i = 0; i < vmdq_rx_conf->nb_pool_maps; i++) {
2878 vmdq_rx_conf->pool_map[i].vlan_id = vlan_tags[i];
2879 vmdq_rx_conf->pool_map[i].pools =
2880 1 << (i % vmdq_rx_conf->nb_queue_pools);
2882 for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
2883 vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
2884 vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
2887 /* set DCB mode of RX and TX of multiple queues */
2888 eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB;
2889 eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
2891 struct rte_eth_dcb_rx_conf *rx_conf =
2892 ð_conf->rx_adv_conf.dcb_rx_conf;
2893 struct rte_eth_dcb_tx_conf *tx_conf =
2894 ð_conf->tx_adv_conf.dcb_tx_conf;
2896 rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf);
2900 rx_conf->nb_tcs = num_tcs;
2901 tx_conf->nb_tcs = num_tcs;
2903 for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
2904 rx_conf->dcb_tc[i] = i % num_tcs;
2905 tx_conf->dcb_tc[i] = i % num_tcs;
2908 eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
2909 eth_conf->rx_adv_conf.rss_conf = rss_conf;
2910 eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
2914 eth_conf->dcb_capability_en =
2915 ETH_DCB_PG_SUPPORT | ETH_DCB_PFC_SUPPORT;
2917 eth_conf->dcb_capability_en = ETH_DCB_PG_SUPPORT;
2923 init_port_dcb_config(portid_t pid,
2924 enum dcb_mode_enable dcb_mode,
2925 enum rte_eth_nb_tcs num_tcs,
2928 struct rte_eth_conf port_conf;
2929 struct rte_port *rte_port;
2933 rte_port = &ports[pid];
2935 memset(&port_conf, 0, sizeof(struct rte_eth_conf));
2936 /* Enter DCB configuration status */
2939 port_conf.rxmode = rte_port->dev_conf.rxmode;
2940 port_conf.txmode = rte_port->dev_conf.txmode;
2942 /*set configuration of DCB in vt mode and DCB in non-vt mode*/
2943 retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en);
2946 port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
2948 /* re-configure the device . */
2949 rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf);
2951 rte_eth_dev_info_get(pid, &rte_port->dev_info);
2953 /* If dev_info.vmdq_pool_base is greater than 0,
2954 * the queue id of vmdq pools is started after pf queues.
2956 if (dcb_mode == DCB_VT_ENABLED &&
2957 rte_port->dev_info.vmdq_pool_base > 0) {
2958 printf("VMDQ_DCB multi-queue mode is nonsensical"
2959 " for port %d.", pid);
2963 /* Assume the ports in testpmd have the same dcb capability
2964 * and has the same number of rxq and txq in dcb mode
2966 if (dcb_mode == DCB_VT_ENABLED) {
2967 if (rte_port->dev_info.max_vfs > 0) {
2968 nb_rxq = rte_port->dev_info.nb_rx_queues;
2969 nb_txq = rte_port->dev_info.nb_tx_queues;
2971 nb_rxq = rte_port->dev_info.max_rx_queues;
2972 nb_txq = rte_port->dev_info.max_tx_queues;
2975 /*if vt is disabled, use all pf queues */
2976 if (rte_port->dev_info.vmdq_pool_base == 0) {
2977 nb_rxq = rte_port->dev_info.max_rx_queues;
2978 nb_txq = rte_port->dev_info.max_tx_queues;
2980 nb_rxq = (queueid_t)num_tcs;
2981 nb_txq = (queueid_t)num_tcs;
2985 rx_free_thresh = 64;
2987 memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));
2989 rxtx_port_config(rte_port);
2991 rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
2992 for (i = 0; i < RTE_DIM(vlan_tags); i++)
2993 rx_vft_set(pid, vlan_tags[i], 1);
2995 rte_eth_macaddr_get(pid, &rte_port->eth_addr);
2996 map_port_queue_stats_mapping_registers(pid, rte_port);
2998 rte_port->dcb_flag = 1;
3006 /* Configuration of Ethernet ports. */
3007 ports = rte_zmalloc("testpmd: ports",
3008 sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
3009 RTE_CACHE_LINE_SIZE);
3010 if (ports == NULL) {
3011 rte_exit(EXIT_FAILURE,
3012 "rte_zmalloc(%d struct rte_port) failed\n",
3016 /* Initialize ports NUMA structures */
3017 memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
3018 memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
3019 memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
3033 const char clr[] = { 27, '[', '2', 'J', '\0' };
3034 const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
3036 /* Clear screen and move to top left */
3037 printf("%s%s", clr, top_left);
3039 printf("\nPort statistics ====================================");
3040 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
3041 nic_stats_display(fwd_ports_ids[i]);
3045 signal_handler(int signum)
3047 if (signum == SIGINT || signum == SIGTERM) {
3048 printf("\nSignal %d received, preparing to exit...\n",
3050 #ifdef RTE_LIBRTE_PDUMP
3051 /* uninitialize packet capture framework */
3054 #ifdef RTE_LIBRTE_LATENCY_STATS
3055 rte_latencystats_uninit();
3058 /* Set flag to indicate the force termination. */
3060 /* exit with the expected status */
3061 signal(signum, SIG_DFL);
3062 kill(getpid(), signum);
3067 main(int argc, char** argv)
3074 signal(SIGINT, signal_handler);
3075 signal(SIGTERM, signal_handler);
3077 diag = rte_eal_init(argc, argv);
3079 rte_panic("Cannot init EAL\n");
3081 testpmd_logtype = rte_log_register("testpmd");
3082 if (testpmd_logtype < 0)
3083 rte_panic("Cannot register log type");
3084 rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
3086 ret = register_eth_event_callback();
3088 rte_panic("Cannot register for ethdev events");
3090 #ifdef RTE_LIBRTE_PDUMP
3091 /* initialize packet capture framework */
3096 RTE_ETH_FOREACH_DEV(port_id) {
3097 ports_ids[count] = port_id;
3100 nb_ports = (portid_t) count;
3102 TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
3104 /* allocate port structures, and init them */
3107 set_def_fwd_config();
3109 rte_panic("Empty set of forwarding logical cores - check the "
3110 "core mask supplied in the command parameters\n");
3112 /* Bitrate/latency stats disabled by default */
3113 #ifdef RTE_LIBRTE_BITRATE
3114 bitrate_enabled = 0;
3116 #ifdef RTE_LIBRTE_LATENCY_STATS
3117 latencystats_enabled = 0;
3120 /* on FreeBSD, mlockall() is disabled by default */
3121 #ifdef RTE_EXEC_ENV_BSDAPP
3130 launch_args_parse(argc, argv);
3132 if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
3133 TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
3137 if (tx_first && interactive)
3138 rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
3139 "interactive mode.\n");
3141 if (tx_first && lsc_interrupt) {
3142 printf("Warning: lsc_interrupt needs to be off when "
3143 " using tx_first. Disabling.\n");
3147 if (!nb_rxq && !nb_txq)
3148 printf("Warning: Either rx or tx queues should be non-zero\n");
3150 if (nb_rxq > 1 && nb_rxq > nb_txq)
3151 printf("Warning: nb_rxq=%d enables RSS configuration, "
3152 "but nb_txq=%d will prevent to fully test it.\n",
3158 ret = rte_dev_hotplug_handle_enable();
3161 "fail to enable hotplug handling.");
3165 ret = rte_dev_event_monitor_start();
3168 "fail to start device event monitoring.");
3172 ret = rte_dev_event_callback_register(NULL,
3173 dev_event_callback, NULL);
3176 "fail to register device event callback\n");
3181 if (start_port(RTE_PORT_ALL) != 0)
3182 rte_exit(EXIT_FAILURE, "Start ports failed\n");
3184 /* set all ports to promiscuous mode by default */
3185 RTE_ETH_FOREACH_DEV(port_id)
3186 rte_eth_promiscuous_enable(port_id);
3188 /* Init metrics library */
3189 rte_metrics_init(rte_socket_id());
3191 #ifdef RTE_LIBRTE_LATENCY_STATS
3192 if (latencystats_enabled != 0) {
3193 int ret = rte_latencystats_init(1, NULL);
3195 printf("Warning: latencystats init()"
3196 " returned error %d\n", ret);
3197 printf("Latencystats running on lcore %d\n",
3198 latencystats_lcore_id);
3202 /* Setup bitrate stats */
3203 #ifdef RTE_LIBRTE_BITRATE
3204 if (bitrate_enabled != 0) {
3205 bitrate_data = rte_stats_bitrate_create();
3206 if (bitrate_data == NULL)
3207 rte_exit(EXIT_FAILURE,
3208 "Could not allocate bitrate data.\n");
3209 rte_stats_bitrate_reg(bitrate_data);
3213 #ifdef RTE_LIBRTE_CMDLINE
3214 if (strlen(cmdline_filename) != 0)
3215 cmdline_read_from_file(cmdline_filename);
3217 if (interactive == 1) {
3219 printf("Start automatic packet forwarding\n");
3220 start_packet_forwarding(0);
3232 printf("No commandline core given, start packet forwarding\n");
3233 start_packet_forwarding(tx_first);
3234 if (stats_period != 0) {
3235 uint64_t prev_time = 0, cur_time, diff_time = 0;
3236 uint64_t timer_period;
3238 /* Convert to number of cycles */
3239 timer_period = stats_period * rte_get_timer_hz();
3241 while (f_quit == 0) {
3242 cur_time = rte_get_timer_cycles();
3243 diff_time += cur_time - prev_time;
3245 if (diff_time >= timer_period) {
3247 /* Reset the timer */
3250 /* Sleep to avoid unnecessary checks */
3251 prev_time = cur_time;
3256 printf("Press enter to exit\n");
3257 rc = read(0, &c, 1);