3 # Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
35 # RTE_EXEC_ENV values are the directories in mk/exec-env/
40 # define the architecture we compile for.
41 # RTE_ARCH values are the directories in mk/arch/
46 # machine can define specific variables or action for a specific board
47 # RTE_MACHINE values are the directories in mk/machine/
52 # The compiler we use.
53 # RTE_TOOLCHAIN values are the directories in mk/toolchain/
58 # Use intrinsics or assembly code for key routines
60 CONFIG_RTE_FORCE_INTRINSICS=n
63 # Machine forces strict alignment constraints.
65 CONFIG_RTE_ARCH_STRICT_ALIGN=n
68 # Compile to share library
70 CONFIG_RTE_BUILD_SHARED_LIB=n
73 # Use newest code breaking previous ABI
78 # Major ABI to overwrite library specific LIBABIVER
83 # Machine's cache line size
85 CONFIG_RTE_CACHE_LINE_SIZE=64
88 # Compile Environment Abstraction Layer
90 CONFIG_RTE_LIBRTE_EAL=y
91 CONFIG_RTE_MAX_LCORE=128
92 CONFIG_RTE_MAX_NUMA_NODES=8
93 CONFIG_RTE_MAX_MEMSEG=256
94 CONFIG_RTE_MAX_MEMZONE=2560
95 CONFIG_RTE_MAX_TAILQ=32
96 CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
97 CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
98 CONFIG_RTE_LOG_HISTORY=256
99 CONFIG_RTE_LIBEAL_USE_HPET=n
100 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
101 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
102 CONFIG_RTE_EAL_IGB_UIO=n
103 CONFIG_RTE_EAL_VFIO=n
104 CONFIG_RTE_MALLOC_DEBUG=n
106 # Default driver path (or "" to disable)
107 CONFIG_RTE_EAL_PMD_PATH=""
110 # Compile Environment Abstraction Layer to support Vmware TSC map
112 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
115 # Compile the argument parser library
117 CONFIG_RTE_LIBRTE_KVARGS=y
120 # Compile generic ethernet library
122 CONFIG_RTE_LIBRTE_ETHER=y
123 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
124 CONFIG_RTE_MAX_ETHPORTS=32
125 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
126 CONFIG_RTE_LIBRTE_IEEE1588=n
127 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
128 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
131 # Turn off Tx preparation stage
133 # Warning: rte_ethdev_tx_prepare() can be safely disabled only if using a
134 # driver which do not implement any Tx preparation.
136 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
139 # Support NIC bypass logic
141 CONFIG_RTE_NIC_BYPASS=n
144 # Compile burst-oriented Amazon ENA PMD driver
146 CONFIG_RTE_LIBRTE_ENA_PMD=y
147 CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
148 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
149 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
150 CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
151 CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
154 # Compile burst-oriented IGB & EM PMD drivers
156 CONFIG_RTE_LIBRTE_EM_PMD=y
157 CONFIG_RTE_LIBRTE_IGB_PMD=y
158 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
159 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
160 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
161 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
162 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
163 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
166 # Compile burst-oriented IXGBE PMD driver
168 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
169 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
170 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
171 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
172 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
173 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
174 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
175 CONFIG_RTE_IXGBE_INC_VECTOR=y
176 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
179 # Compile burst-oriented I40E PMD driver
181 CONFIG_RTE_LIBRTE_I40E_PMD=y
182 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
183 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
184 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
185 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
186 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
187 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
188 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
189 CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
190 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
191 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
192 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
193 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
194 # interval up to 8160 us, aligned to 2 (or default value)
195 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
198 # Compile burst-oriented FM10K PMD
200 CONFIG_RTE_LIBRTE_FM10K_PMD=y
201 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
202 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
203 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
204 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
205 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
206 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
207 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
210 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
212 CONFIG_RTE_LIBRTE_MLX4_PMD=n
213 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
214 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
215 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
216 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
217 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
220 # Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
222 CONFIG_RTE_LIBRTE_MLX5_PMD=n
223 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
224 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
227 # Compile burst-oriented Broadcom PMD driver
229 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
230 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
231 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
232 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
233 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
234 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
235 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
238 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
240 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
241 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
242 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
243 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
244 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
245 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
248 # Compile burst-oriented Cisco ENIC PMD driver
250 CONFIG_RTE_LIBRTE_ENIC_PMD=y
251 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
254 # Compile burst-oriented Netronome NFP PMD driver
256 CONFIG_RTE_LIBRTE_NFP_PMD=n
257 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
260 # Compile burst-oriented Broadcom BNXT PMD driver
262 CONFIG_RTE_LIBRTE_BNXT_PMD=y
265 # Compile burst-oriented Solarflare libefx-based PMD
267 CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
268 CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
271 # Compile software PMD backed by SZEDATA2 device
273 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
275 # Defines firmware type address space.
276 # RTE_LIBRTE_PMD_SZEDATA2_AS can be:
281 # Other values raise compile time error
282 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
285 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
287 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
288 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n
289 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
290 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
291 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n
292 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
295 # Compile burst-oriented Cavium LiquidIO PMD driver
297 CONFIG_RTE_LIBRTE_LIO_PMD=y
298 CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER=n
299 CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT=n
300 CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
301 CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
302 CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
303 CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
306 # Compile burst-oriented VIRTIO PMD driver
308 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
309 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
310 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
311 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
312 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
313 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
316 # Compile virtio device emulation inside virtio PMD driver
318 CONFIG_RTE_VIRTIO_USER=n
321 # Compile burst-oriented VMXNET3 PMD driver
323 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
324 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
325 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
326 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
327 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
328 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
331 # Compile example software rings based PMD
333 CONFIG_RTE_LIBRTE_PMD_RING=y
334 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
335 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
338 # Compile software PMD backed by PCAP files
340 CONFIG_RTE_LIBRTE_PMD_PCAP=n
343 # Compile link bonding PMD library
345 CONFIG_RTE_LIBRTE_PMD_BOND=y
346 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
347 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
349 # QLogic 10G/25G/40G/50G/100G PMD
351 CONFIG_RTE_LIBRTE_QEDE_PMD=y
352 CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n
353 CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
354 CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
355 CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
356 CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
357 #Provides abs path/name of the firmware file.
358 #Empty string denotes driver will use default firmware
359 CONFIG_RTE_LIBRTE_QEDE_FW=""
362 # Compile software PMD backed by AF_PACKET sockets (Linux only)
364 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
367 # Compile the TAP PMD
368 # It is enabled by default for Linux only.
370 CONFIG_RTE_LIBRTE_PMD_TAP=n
375 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
380 CONFIG_RTE_LIBRTE_PMD_NULL=y
383 # Do prefetch of packet data within PMD driver receive function
385 CONFIG_RTE_PMD_PACKET_PREFETCH=y
388 # Compile generic crypto device library
390 CONFIG_RTE_LIBRTE_CRYPTODEV=y
391 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
392 CONFIG_RTE_CRYPTO_MAX_DEVS=64
393 CONFIG_RTE_CRYPTODEV_NAME_LEN=64
396 # Compile PMD for ARMv8 Crypto device
398 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
399 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
402 # Compile PMD for QuickAssist based devices
404 CONFIG_RTE_LIBRTE_PMD_QAT=n
405 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
406 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
407 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
408 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
410 # Number of sessions to create in the session memory pool
411 # on a single QuickAssist device.
413 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
416 # Compile PMD for AESNI backed device
418 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
419 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
422 # Compile PMD for Software backed device
424 CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
425 CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
428 # Compile PMD for AESNI GCM device
430 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
431 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
434 # Compile PMD for SNOW 3G device
436 CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
437 CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
440 # Compile PMD for KASUMI device
442 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
443 CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
446 # Compile PMD for ZUC device
448 CONFIG_RTE_LIBRTE_PMD_ZUC=n
449 CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
452 # Compile PMD for Crypto Scheduler device
454 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
455 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
458 # Compile PMD for NULL Crypto device
460 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
463 # Compile librte_ring
465 CONFIG_RTE_LIBRTE_RING=y
468 # Compile librte_mempool
470 CONFIG_RTE_LIBRTE_MEMPOOL=y
471 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
472 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
475 # Compile Mempool drivers
477 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
478 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
481 # Compile librte_mbuf
483 CONFIG_RTE_LIBRTE_MBUF=y
484 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
485 CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
486 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
487 CONFIG_RTE_PKTMBUF_HEADROOM=128
490 # Compile librte_timer
492 CONFIG_RTE_LIBRTE_TIMER=y
493 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
496 # Compile librte_cfgfile
498 CONFIG_RTE_LIBRTE_CFGFILE=y
501 # Compile librte_cmdline
503 CONFIG_RTE_LIBRTE_CMDLINE=y
504 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
507 # Compile librte_hash
509 CONFIG_RTE_LIBRTE_HASH=y
510 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
515 CONFIG_RTE_LIBRTE_EFD=y
518 # Compile librte_jobstats
520 CONFIG_RTE_LIBRTE_JOBSTATS=y
525 CONFIG_RTE_LIBRTE_LPM=y
526 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
531 CONFIG_RTE_LIBRTE_ACL=y
532 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
535 # Compile librte_power
537 CONFIG_RTE_LIBRTE_POWER=n
538 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
539 CONFIG_RTE_MAX_LCORE_FREQS=64
544 CONFIG_RTE_LIBRTE_NET=y
547 # Compile librte_ip_frag
549 CONFIG_RTE_LIBRTE_IP_FRAG=y
550 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
551 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
552 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
555 # Compile librte_meter
557 CONFIG_RTE_LIBRTE_METER=y
560 # Compile librte_sched
562 CONFIG_RTE_LIBRTE_SCHED=y
563 CONFIG_RTE_SCHED_DEBUG=n
564 CONFIG_RTE_SCHED_RED=n
565 CONFIG_RTE_SCHED_COLLECT_STATS=n
566 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
567 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
568 CONFIG_RTE_SCHED_VECTOR=n
571 # Compile the distributor library
573 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
576 # Compile the reorder library
578 CONFIG_RTE_LIBRTE_REORDER=y
581 # Compile librte_port
583 CONFIG_RTE_LIBRTE_PORT=y
584 CONFIG_RTE_PORT_STATS_COLLECT=n
585 CONFIG_RTE_PORT_PCAP=n
588 # Compile librte_table
590 CONFIG_RTE_LIBRTE_TABLE=y
591 CONFIG_RTE_TABLE_STATS_COLLECT=n
594 # Compile librte_pipeline
596 CONFIG_RTE_LIBRTE_PIPELINE=y
597 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
602 CONFIG_RTE_LIBRTE_KNI=n
603 CONFIG_RTE_LIBRTE_PMD_KNI=n
604 CONFIG_RTE_KNI_KMOD=n
605 CONFIG_RTE_KNI_KMOD_ETHTOOL=n
606 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
609 # Compile the pdump library
611 CONFIG_RTE_LIBRTE_PDUMP=y
614 # Compile vhost user library
616 CONFIG_RTE_LIBRTE_VHOST=n
617 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
618 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
622 # To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
624 CONFIG_RTE_LIBRTE_PMD_VHOST=n
627 #Compile Xen domain0 support
629 CONFIG_RTE_LIBRTE_XEN_DOM0=n
632 # Compile the test application
634 CONFIG_RTE_APP_TEST=y
635 CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
638 # Compile the PMD test application
640 CONFIG_RTE_TEST_PMD=y
641 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
642 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
645 # Compile the crypto performance application
647 CONFIG_RTE_APP_CRYPTO_PERF=y