3 # Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
35 # RTE_EXEC_ENV values are the directories in mk/exec-env/
40 # define the architecture we compile for.
41 # RTE_ARCH values are the directories in mk/arch/
46 # machine can define specific variables or action for a specific board
47 # RTE_MACHINE values are the directories in mk/machine/
52 # The compiler we use.
53 # RTE_TOOLCHAIN values are the directories in mk/toolchain/
58 # Use intrinsics or assembly code for key routines
60 CONFIG_RTE_FORCE_INTRINSICS=n
63 # Machine forces strict alignment constraints.
65 CONFIG_RTE_ARCH_STRICT_ALIGN=n
68 # Compile to share library
70 CONFIG_RTE_BUILD_SHARED_LIB=n
73 # Use newest code breaking previous ABI
78 # Machine's cache line size
80 CONFIG_RTE_CACHE_LINE_SIZE=64
83 # Compile Environment Abstraction Layer
85 CONFIG_RTE_LIBRTE_EAL=y
86 CONFIG_RTE_MAX_LCORE=128
87 CONFIG_RTE_MAX_NUMA_NODES=8
88 CONFIG_RTE_MAX_MEMSEG=256
89 CONFIG_RTE_MAX_MEMZONE=2560
90 CONFIG_RTE_MAX_TAILQ=32
91 CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
92 CONFIG_RTE_LOG_HISTORY=256
93 CONFIG_RTE_LIBEAL_USE_HPET=n
94 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
95 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
96 CONFIG_RTE_EAL_IGB_UIO=n
98 CONFIG_RTE_MALLOC_DEBUG=n
100 # Default driver path (or "" to disable)
101 CONFIG_RTE_EAL_PMD_PATH=""
104 # Compile Environment Abstraction Layer to support Vmware TSC map
106 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
109 # Compile the argument parser library
111 CONFIG_RTE_LIBRTE_KVARGS=y
114 # Compile generic ethernet library
116 CONFIG_RTE_LIBRTE_ETHER=y
117 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
118 CONFIG_RTE_MAX_ETHPORTS=32
119 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
120 CONFIG_RTE_LIBRTE_IEEE1588=n
121 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
122 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
125 # Support NIC bypass logic
127 CONFIG_RTE_NIC_BYPASS=n
130 # Compile burst-oriented Amazon ENA PMD driver
132 CONFIG_RTE_LIBRTE_ENA_PMD=y
133 CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
134 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
135 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
136 CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
137 CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
140 # Compile burst-oriented IGB & EM PMD drivers
142 CONFIG_RTE_LIBRTE_EM_PMD=y
143 CONFIG_RTE_LIBRTE_IGB_PMD=y
144 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
145 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
146 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
147 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
148 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
149 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
152 # Compile burst-oriented IXGBE PMD driver
154 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
155 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
156 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
157 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
158 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
159 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
160 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
161 CONFIG_RTE_IXGBE_INC_VECTOR=y
162 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
165 # Compile burst-oriented I40E PMD driver
167 CONFIG_RTE_LIBRTE_I40E_PMD=y
168 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
169 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
170 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
171 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
172 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
173 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
174 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
175 CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
176 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
177 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
178 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
179 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
180 # interval up to 8160 us, aligned to 2 (or default value)
181 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
184 # Compile burst-oriented FM10K PMD
186 CONFIG_RTE_LIBRTE_FM10K_PMD=y
187 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
188 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
189 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
190 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
191 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
192 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
193 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
196 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
198 CONFIG_RTE_LIBRTE_MLX4_PMD=n
199 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
200 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
201 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
202 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
203 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
206 # Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
208 CONFIG_RTE_LIBRTE_MLX5_PMD=n
209 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
210 CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
211 CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
212 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
215 # Compile burst-oriented Broadcom PMD driver
217 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
218 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
219 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
220 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
221 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
222 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
223 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
226 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
228 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
229 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
230 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
231 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
232 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
233 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
236 # Compile burst-oriented Cisco ENIC PMD driver
238 CONFIG_RTE_LIBRTE_ENIC_PMD=y
239 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
242 # Compile burst-oriented Netronome NFP PMD driver
244 CONFIG_RTE_LIBRTE_NFP_PMD=n
245 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
248 # Compile software PMD backed by SZEDATA2 device
250 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
252 # Defines firmware type address space.
253 # RTE_LIBRTE_PMD_SZEDATA2_AS can be:
258 # Other values raise compile time error
259 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
262 # Compile burst-oriented VIRTIO PMD driver
264 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
265 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
266 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
267 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
268 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
269 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
272 # Compile burst-oriented VMXNET3 PMD driver
274 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
275 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
276 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
277 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
278 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
279 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
282 # Compile example software rings based PMD
284 CONFIG_RTE_LIBRTE_PMD_RING=y
285 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
286 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
289 # Compile software PMD backed by PCAP files
291 CONFIG_RTE_LIBRTE_PMD_PCAP=n
294 # Compile link bonding PMD library
296 CONFIG_RTE_LIBRTE_PMD_BOND=y
297 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
298 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
301 # Compile software PMD backed by AF_PACKET sockets (Linux only)
303 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
308 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
313 CONFIG_RTE_LIBRTE_PMD_NULL=y
316 # Do prefetch of packet data within PMD driver receive function
318 CONFIG_RTE_PMD_PACKET_PREFETCH=y
321 # Compile generic crypto device library
323 CONFIG_RTE_LIBRTE_CRYPTODEV=y
324 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
325 CONFIG_RTE_CRYPTO_MAX_DEVS=64
326 CONFIG_RTE_CRYPTODEV_NAME_LEN=64
329 # Compile PMD for QuickAssist based devices
331 CONFIG_RTE_LIBRTE_PMD_QAT=n
332 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
333 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
334 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
335 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
337 # Number of sessions to create in the session memory pool
338 # on a single QuickAssist device.
340 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
343 # Compile PMD for AESNI backed device
345 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
346 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
349 # Compile PMD for AESNI GCM device
351 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
352 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
355 # Compile PMD for SNOW 3G device
357 CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
358 CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
361 # Compile PMD for NULL Crypto device
363 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
366 # Compile librte_ring
368 CONFIG_RTE_LIBRTE_RING=y
369 CONFIG_RTE_LIBRTE_RING_DEBUG=n
370 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
371 CONFIG_RTE_RING_PAUSE_REP_COUNT=0
374 # Compile librte_mempool
376 CONFIG_RTE_LIBRTE_MEMPOOL=y
377 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
378 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
381 # Compile librte_mbuf
383 CONFIG_RTE_LIBRTE_MBUF=y
384 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
385 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
386 CONFIG_RTE_PKTMBUF_HEADROOM=128
389 # Compile librte_timer
391 CONFIG_RTE_LIBRTE_TIMER=y
392 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
395 # Compile librte_cfgfile
397 CONFIG_RTE_LIBRTE_CFGFILE=y
400 # Compile librte_cmdline
402 CONFIG_RTE_LIBRTE_CMDLINE=y
403 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
406 # Compile librte_hash
408 CONFIG_RTE_LIBRTE_HASH=y
409 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
412 # Compile librte_jobstats
414 CONFIG_RTE_LIBRTE_JOBSTATS=y
419 CONFIG_RTE_LIBRTE_LPM=y
420 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
425 CONFIG_RTE_LIBRTE_ACL=y
426 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
429 # Compile librte_power
431 CONFIG_RTE_LIBRTE_POWER=n
432 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
433 CONFIG_RTE_MAX_LCORE_FREQS=64
438 CONFIG_RTE_LIBRTE_NET=y
441 # Compile librte_ip_frag
443 CONFIG_RTE_LIBRTE_IP_FRAG=y
444 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
445 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
446 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
449 # Compile librte_meter
451 CONFIG_RTE_LIBRTE_METER=y
454 # Compile librte_sched
456 CONFIG_RTE_LIBRTE_SCHED=y
457 CONFIG_RTE_SCHED_DEBUG=n
458 CONFIG_RTE_SCHED_RED=n
459 CONFIG_RTE_SCHED_COLLECT_STATS=n
460 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
461 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
462 CONFIG_RTE_SCHED_VECTOR=n
465 # Compile the distributor library
467 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
470 # Compile the reorder library
472 CONFIG_RTE_LIBRTE_REORDER=y
475 # Compile librte_port
477 CONFIG_RTE_LIBRTE_PORT=y
478 CONFIG_RTE_PORT_STATS_COLLECT=n
479 CONFIG_RTE_PORT_PCAP=n
482 # Compile librte_table
484 CONFIG_RTE_LIBRTE_TABLE=y
485 CONFIG_RTE_TABLE_STATS_COLLECT=n
488 # Compile librte_pipeline
490 CONFIG_RTE_LIBRTE_PIPELINE=y
491 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
496 CONFIG_RTE_LIBRTE_KNI=n
497 CONFIG_RTE_KNI_KMOD=n
498 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
499 CONFIG_RTE_KNI_KO_DEBUG=n
500 CONFIG_RTE_KNI_VHOST=n
501 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
502 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
503 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
504 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
507 # Compile vhost library
508 # fuse-devel is needed to run vhost-cuse.
509 # fuse-devel enables user space char driver development
510 # vhost-user is turned on by default.
512 CONFIG_RTE_LIBRTE_VHOST=n
513 CONFIG_RTE_LIBRTE_VHOST_USER=y
514 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
515 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
519 # To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
521 CONFIG_RTE_LIBRTE_PMD_VHOST=n
524 #Compile Xen domain0 support
526 CONFIG_RTE_LIBRTE_XEN_DOM0=n
529 # Enable warning directives
531 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
534 # Compile the test application
536 CONFIG_RTE_APP_TEST=y
539 # Compile the PMD test application
541 CONFIG_RTE_TEST_PMD=y
542 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
543 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n