3 # Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
35 # RTE_EXEC_ENV values are the directories in mk/exec-env/
40 # define the architecture we compile for.
41 # RTE_ARCH values are the directories in mk/arch/
46 # machine can define specific variables or action for a specific board
47 # RTE_MACHINE values are the directories in mk/machine/
52 # The compiler we use.
53 # RTE_TOOLCHAIN values are the directories in mk/toolchain/
58 # Use intrinsics or assembly code for key routines
60 CONFIG_RTE_FORCE_INTRINSICS=n
63 # Machine forces strict alignment constraints.
65 CONFIG_RTE_ARCH_STRICT_ALIGN=n
68 # Compile to share library
70 CONFIG_RTE_BUILD_SHARED_LIB=n
73 # Use newest code breaking previous ABI
78 # Major ABI to overwrite library specific LIBABIVER
83 # Machine's cache line size
85 CONFIG_RTE_CACHE_LINE_SIZE=64
88 # Compile Environment Abstraction Layer
90 CONFIG_RTE_LIBRTE_EAL=y
91 CONFIG_RTE_MAX_LCORE=128
92 CONFIG_RTE_MAX_NUMA_NODES=8
93 CONFIG_RTE_MAX_MEMSEG=256
94 CONFIG_RTE_MAX_MEMZONE=2560
95 CONFIG_RTE_MAX_TAILQ=32
96 CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
97 CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
98 CONFIG_RTE_LOG_HISTORY=256
99 CONFIG_RTE_LIBEAL_USE_HPET=n
100 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
101 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
102 CONFIG_RTE_EAL_IGB_UIO=n
103 CONFIG_RTE_EAL_VFIO=n
104 CONFIG_RTE_MALLOC_DEBUG=n
106 # Default driver path (or "" to disable)
107 CONFIG_RTE_EAL_PMD_PATH=""
110 # Compile Environment Abstraction Layer to support Vmware TSC map
112 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
115 # Compile the argument parser library
117 CONFIG_RTE_LIBRTE_KVARGS=y
120 # Compile generic ethernet library
122 CONFIG_RTE_LIBRTE_ETHER=y
123 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
124 CONFIG_RTE_MAX_ETHPORTS=32
125 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
126 CONFIG_RTE_LIBRTE_IEEE1588=n
127 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
128 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
131 # Turn off Tx preparation stage
133 # Warning: rte_ethdev_tx_prepare() can be safely disabled only if using a
134 # driver which do not implement any Tx preparation.
136 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
139 # Support NIC bypass logic
141 CONFIG_RTE_NIC_BYPASS=n
144 # Compile burst-oriented Amazon ENA PMD driver
146 CONFIG_RTE_LIBRTE_ENA_PMD=y
147 CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
148 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
149 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
150 CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
151 CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
154 # Compile burst-oriented IGB & EM PMD drivers
156 CONFIG_RTE_LIBRTE_EM_PMD=y
157 CONFIG_RTE_LIBRTE_IGB_PMD=y
158 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
159 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
160 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
161 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
162 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
163 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
166 # Compile burst-oriented IXGBE PMD driver
168 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
169 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
170 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
171 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
172 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
173 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
174 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
175 CONFIG_RTE_IXGBE_INC_VECTOR=y
176 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
179 # Compile burst-oriented I40E PMD driver
181 CONFIG_RTE_LIBRTE_I40E_PMD=y
182 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
183 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
184 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
185 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
186 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
187 CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
188 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
189 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
190 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
191 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
192 # interval up to 8160 us, aligned to 2 (or default value)
193 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
196 # Compile burst-oriented FM10K PMD
198 CONFIG_RTE_LIBRTE_FM10K_PMD=y
199 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
200 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
201 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
202 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
203 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
204 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
205 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
208 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
210 CONFIG_RTE_LIBRTE_MLX4_PMD=n
211 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
212 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
213 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
214 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
215 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
218 # Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
220 CONFIG_RTE_LIBRTE_MLX5_PMD=n
221 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
222 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
225 # Compile burst-oriented Broadcom PMD driver
227 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
228 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
229 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
230 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
231 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
232 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
233 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
236 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
238 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
239 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
240 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
241 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
242 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
243 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
246 # Compile burst-oriented Cisco ENIC PMD driver
248 CONFIG_RTE_LIBRTE_ENIC_PMD=y
249 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
252 # Compile burst-oriented Netronome NFP PMD driver
254 CONFIG_RTE_LIBRTE_NFP_PMD=n
255 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
258 # Compile burst-oriented Broadcom BNXT PMD driver
260 CONFIG_RTE_LIBRTE_BNXT_PMD=y
263 # Compile burst-oriented Solarflare libefx-based PMD
265 CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
266 CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
269 # Compile software PMD backed by SZEDATA2 device
271 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
273 # Defines firmware type address space.
274 # RTE_LIBRTE_PMD_SZEDATA2_AS can be:
279 # Other values raise compile time error
280 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
283 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
285 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
286 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n
287 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
288 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
289 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n
290 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
293 # Compile burst-oriented Cavium LiquidIO PMD driver
295 CONFIG_RTE_LIBRTE_LIO_PMD=y
296 CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER=n
297 CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT=n
298 CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
299 CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
300 CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
301 CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
304 # Compile burst-oriented VIRTIO PMD driver
306 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
307 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
308 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
309 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
310 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
311 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
314 # Compile virtio device emulation inside virtio PMD driver
316 CONFIG_RTE_VIRTIO_USER=n
319 # Compile burst-oriented VMXNET3 PMD driver
321 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
322 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
323 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
324 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
325 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
326 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
329 # Compile example software rings based PMD
331 CONFIG_RTE_LIBRTE_PMD_RING=y
332 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
333 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
336 # Compile software PMD backed by PCAP files
338 CONFIG_RTE_LIBRTE_PMD_PCAP=n
341 # Compile link bonding PMD library
343 CONFIG_RTE_LIBRTE_PMD_BOND=y
344 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
345 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
347 # QLogic 10G/25G/40G/50G/100G PMD
349 CONFIG_RTE_LIBRTE_QEDE_PMD=y
350 CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n
351 CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
352 CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
353 CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
354 CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
355 #Provides abs path/name of the firmware file.
356 #Empty string denotes driver will use default firmware
357 CONFIG_RTE_LIBRTE_QEDE_FW=""
360 # Compile software PMD backed by AF_PACKET sockets (Linux only)
362 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
367 CONFIG_RTE_LIBRTE_ARK_PMD=y
368 CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
369 CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
370 CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
371 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
372 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
375 # Compile WRS accelerated virtual port (AVP) guest PMD driver
377 CONFIG_RTE_LIBRTE_AVP_PMD=n
378 CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
379 CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
380 CONFIG_RTE_LIBRTE_AVP_DEBUG_DRIVER=y
381 CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
384 # Compile the TAP PMD
385 # It is enabled by default for Linux only.
387 CONFIG_RTE_LIBRTE_PMD_TAP=n
392 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
397 CONFIG_RTE_LIBRTE_PMD_NULL=y
400 # Do prefetch of packet data within PMD driver receive function
402 CONFIG_RTE_PMD_PACKET_PREFETCH=y
405 # Compile generic crypto device library
407 CONFIG_RTE_LIBRTE_CRYPTODEV=y
408 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
409 CONFIG_RTE_CRYPTO_MAX_DEVS=64
410 CONFIG_RTE_CRYPTODEV_NAME_LEN=64
413 # Compile PMD for ARMv8 Crypto device
415 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
416 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
419 # Compile PMD for QuickAssist based devices
421 CONFIG_RTE_LIBRTE_PMD_QAT=n
422 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
423 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
424 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
425 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
427 # Number of sessions to create in the session memory pool
428 # on a single QuickAssist device.
430 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
433 # Compile PMD for AESNI backed device
435 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
436 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
439 # Compile PMD for Software backed device
441 CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
442 CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
445 # Compile PMD for AESNI GCM device
447 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
448 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
451 # Compile PMD for SNOW 3G device
453 CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
454 CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
457 # Compile PMD for KASUMI device
459 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
460 CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
463 # Compile PMD for ZUC device
465 CONFIG_RTE_LIBRTE_PMD_ZUC=n
466 CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
469 # Compile PMD for Crypto Scheduler device
471 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
472 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
475 # Compile PMD for NULL Crypto device
477 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
480 # Compile generic event device library
482 CONFIG_RTE_LIBRTE_EVENTDEV=y
483 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
484 CONFIG_RTE_EVENT_MAX_DEVS=16
485 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
488 # Compile PMD for skeleton event device
490 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
491 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
494 # Compile PMD for software event device
496 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
497 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
500 # Compile PMD for octeontx sso event device
502 CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
503 CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF_DEBUG=n
506 # Compile librte_ring
508 CONFIG_RTE_LIBRTE_RING=y
511 # Compile librte_mempool
513 CONFIG_RTE_LIBRTE_MEMPOOL=y
514 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
515 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
518 # Compile Mempool drivers
520 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
521 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
524 # Compile librte_mbuf
526 CONFIG_RTE_LIBRTE_MBUF=y
527 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
528 CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
529 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
530 CONFIG_RTE_PKTMBUF_HEADROOM=128
533 # Compile librte_timer
535 CONFIG_RTE_LIBRTE_TIMER=y
536 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
539 # Compile librte_cfgfile
541 CONFIG_RTE_LIBRTE_CFGFILE=y
544 # Compile librte_cmdline
546 CONFIG_RTE_LIBRTE_CMDLINE=y
547 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
550 # Compile librte_hash
552 CONFIG_RTE_LIBRTE_HASH=y
553 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
558 CONFIG_RTE_LIBRTE_EFD=y
561 # Compile librte_jobstats
563 CONFIG_RTE_LIBRTE_JOBSTATS=y
566 # Compile the device metrics library
568 CONFIG_RTE_LIBRTE_METRICS=y
571 # Compile the bitrate statistics library
573 CONFIG_RTE_LIBRTE_BITRATE=y
576 # Compile the latency statistics library
578 CONFIG_RTE_LIBRTE_LATENCY_STATS=y
583 CONFIG_RTE_LIBRTE_LPM=y
584 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
589 CONFIG_RTE_LIBRTE_ACL=y
590 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
593 # Compile librte_power
595 CONFIG_RTE_LIBRTE_POWER=n
596 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
597 CONFIG_RTE_MAX_LCORE_FREQS=64
602 CONFIG_RTE_LIBRTE_NET=y
605 # Compile librte_ip_frag
607 CONFIG_RTE_LIBRTE_IP_FRAG=y
608 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
609 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
610 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
613 # Compile librte_meter
615 CONFIG_RTE_LIBRTE_METER=y
618 # Compile librte_sched
620 CONFIG_RTE_LIBRTE_SCHED=y
621 CONFIG_RTE_SCHED_DEBUG=n
622 CONFIG_RTE_SCHED_RED=n
623 CONFIG_RTE_SCHED_COLLECT_STATS=n
624 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
625 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
626 CONFIG_RTE_SCHED_VECTOR=n
629 # Compile the distributor library
631 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
634 # Compile the reorder library
636 CONFIG_RTE_LIBRTE_REORDER=y
639 # Compile librte_port
641 CONFIG_RTE_LIBRTE_PORT=y
642 CONFIG_RTE_PORT_STATS_COLLECT=n
643 CONFIG_RTE_PORT_PCAP=n
646 # Compile librte_table
648 CONFIG_RTE_LIBRTE_TABLE=y
649 CONFIG_RTE_TABLE_STATS_COLLECT=n
652 # Compile librte_pipeline
654 CONFIG_RTE_LIBRTE_PIPELINE=y
655 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
660 CONFIG_RTE_LIBRTE_KNI=n
661 CONFIG_RTE_LIBRTE_PMD_KNI=n
662 CONFIG_RTE_KNI_KMOD=n
663 CONFIG_RTE_KNI_KMOD_ETHTOOL=n
664 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
667 # Compile the pdump library
669 CONFIG_RTE_LIBRTE_PDUMP=y
672 # Compile vhost user library
674 CONFIG_RTE_LIBRTE_VHOST=n
675 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
676 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
680 # To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
682 CONFIG_RTE_LIBRTE_PMD_VHOST=n
685 #Compile Xen domain0 support
687 CONFIG_RTE_LIBRTE_XEN_DOM0=n
690 # Compile the test application
692 CONFIG_RTE_APP_TEST=y
693 CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
696 # Compile the PMD test application
698 CONFIG_RTE_TEST_PMD=y
699 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
700 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
703 # Compile the crypto performance application
705 CONFIG_RTE_APP_CRYPTO_PERF=y