3 # Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
35 # RTE_EXEC_ENV values are the directories in mk/exec-env/
40 # define the architecture we compile for.
41 # RTE_ARCH values are the directories in mk/arch/
46 # machine can define specific variables or action for a specific board
47 # RTE_MACHINE values are the directories in mk/machine/
52 # The compiler we use.
53 # RTE_TOOLCHAIN values are the directories in mk/toolchain/
58 # Use intrinsics or assembly code for key routines
60 CONFIG_RTE_FORCE_INTRINSICS=n
63 # Machine forces strict alignment constraints.
65 CONFIG_RTE_ARCH_STRICT_ALIGN=n
68 # Compile to share library
70 CONFIG_RTE_BUILD_SHARED_LIB=n
73 # Use newest code breaking previous ABI
78 # Major ABI to overwrite library specific LIBABIVER
83 # Machine's cache line size
85 CONFIG_RTE_CACHE_LINE_SIZE=64
88 # Compile Environment Abstraction Layer
90 CONFIG_RTE_LIBRTE_EAL=y
91 CONFIG_RTE_MAX_LCORE=128
92 CONFIG_RTE_MAX_NUMA_NODES=8
93 CONFIG_RTE_MAX_MEMSEG=256
94 CONFIG_RTE_MAX_MEMZONE=2560
95 CONFIG_RTE_MAX_TAILQ=32
96 CONFIG_RTE_ENABLE_ASSERT=n
97 CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
98 CONFIG_RTE_LOG_HISTORY=256
99 CONFIG_RTE_BACKTRACE=y
100 CONFIG_RTE_LIBEAL_USE_HPET=n
101 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
102 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
103 CONFIG_RTE_EAL_IGB_UIO=n
104 CONFIG_RTE_EAL_VFIO=n
105 CONFIG_RTE_MAX_VFIO_GROUPS=64
106 CONFIG_RTE_MALLOC_DEBUG=n
107 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
110 # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
111 # AVX512 is marked as experimental for now, will enable it after enough
112 # field test and possible optimization.
114 CONFIG_RTE_ENABLE_AVX=y
115 CONFIG_RTE_ENABLE_AVX512=n
117 # Default driver path (or "" to disable)
118 CONFIG_RTE_EAL_PMD_PATH=""
121 # Compile Environment Abstraction Layer to support Vmware TSC map
123 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
126 # Compile the PCI library
128 CONFIG_RTE_LIBRTE_PCI=y
131 # Compile the argument parser library
133 CONFIG_RTE_LIBRTE_KVARGS=y
136 # Compile generic ethernet library
138 CONFIG_RTE_LIBRTE_ETHER=y
139 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
140 CONFIG_RTE_MAX_ETHPORTS=32
141 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
142 CONFIG_RTE_LIBRTE_IEEE1588=n
143 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
144 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
145 CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
148 # Turn off Tx preparation stage
150 # Warning: rte_eth_tx_prepare() can be safely disabled only if using a
151 # driver which do not implement any Tx preparation.
153 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
156 # Compile PCI bus driver
158 CONFIG_RTE_LIBRTE_PCI_BUS=y
161 # Compile the vdev bus
163 CONFIG_RTE_LIBRTE_VDEV_BUS=y
168 CONFIG_RTE_LIBRTE_ARK_PMD=y
169 CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
170 CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
171 CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
172 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
173 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
176 # Compile burst-oriented Broadcom PMD driver
178 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
179 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
180 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
181 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
182 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
185 # Compile burst-oriented Broadcom BNXT PMD driver
187 CONFIG_RTE_LIBRTE_BNXT_PMD=y
190 # Compile burst-oriented Chelsio Terminator (CXGBE) PMD
192 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
193 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
194 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
195 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
196 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
197 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
198 CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
201 CONFIG_RTE_LIBRTE_DPAA_BUS=n
202 CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
203 CONFIG_RTE_LIBRTE_DPAA_PMD=n
206 # Compile NXP DPAA2 FSL-MC Bus
208 CONFIG_RTE_LIBRTE_FSLMC_BUS=n
211 # Compile Support Libraries for NXP DPAA2
213 CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
214 CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
217 # Compile burst-oriented NXP DPAA2 PMD driver
219 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
220 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
221 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
222 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
223 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
224 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
227 # Compile burst-oriented Amazon ENA PMD driver
229 CONFIG_RTE_LIBRTE_ENA_PMD=y
230 CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
231 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
232 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
233 CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
236 # Compile burst-oriented Cisco ENIC PMD driver
238 CONFIG_RTE_LIBRTE_ENIC_PMD=y
241 # Compile burst-oriented IGB & EM PMD drivers
243 CONFIG_RTE_LIBRTE_EM_PMD=y
244 CONFIG_RTE_LIBRTE_IGB_PMD=y
245 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
246 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
247 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
248 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
251 # Compile burst-oriented IXGBE PMD driver
253 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
254 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
255 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
256 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
257 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
258 CONFIG_RTE_IXGBE_INC_VECTOR=y
259 CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
262 # Compile burst-oriented I40E PMD driver
264 CONFIG_RTE_LIBRTE_I40E_PMD=y
265 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
266 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
267 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
268 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
269 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
270 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
271 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
272 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
273 # interval up to 8160 us, aligned to 2 (or default value)
274 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
277 # Compile burst-oriented FM10K PMD
279 CONFIG_RTE_LIBRTE_FM10K_PMD=y
280 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
281 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
282 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
283 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
284 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
287 # Compile burst-oriented AVF PMD driver
289 CONFIG_RTE_LIBRTE_AVF_PMD=y
290 CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
291 CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
292 CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
293 CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
294 CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
297 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
299 CONFIG_RTE_LIBRTE_MLX4_PMD=n
300 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
301 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
304 # Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
306 CONFIG_RTE_LIBRTE_MLX5_PMD=n
307 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
308 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
311 # Compile burst-oriented Netronome NFP PMD driver
313 CONFIG_RTE_LIBRTE_NFP_PMD=n
314 CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
315 CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
317 # QLogic 10G/25G/40G/50G/100G PMD
319 CONFIG_RTE_LIBRTE_QEDE_PMD=y
320 CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
321 CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
322 #Provides abs path/name of the firmware file.
323 #Empty string denotes driver will use default firmware
324 CONFIG_RTE_LIBRTE_QEDE_FW=""
327 # Compile burst-oriented Solarflare libefx-based PMD
329 CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
330 CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
333 # Compile software PMD backed by SZEDATA2 device
335 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
337 # Defines firmware type address space.
338 # See documentation for supported values.
339 # Other values raise compile time error.
340 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
343 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
345 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
346 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
347 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
350 # Compile burst-oriented Cavium LiquidIO PMD driver
352 CONFIG_RTE_LIBRTE_LIO_PMD=y
353 CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
354 CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
355 CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
356 CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
359 # Compile burst-oriented Cavium OCTEONTX network PMD driver
361 CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
364 # Compile WRS accelerated virtual port (AVP) guest PMD driver
366 CONFIG_RTE_LIBRTE_AVP_PMD=n
367 CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
368 CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
369 CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
372 # Compile burst-oriented VIRTIO PMD driver
374 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
375 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
376 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
377 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
380 # Compile virtio device emulation inside virtio PMD driver
382 CONFIG_RTE_VIRTIO_USER=n
385 # Compile burst-oriented VMXNET3 PMD driver
387 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
388 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
389 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
390 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
393 # Compile software PMD backed by AF_PACKET sockets (Linux only)
395 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
398 # Compile link bonding PMD library
400 CONFIG_RTE_LIBRTE_PMD_BOND=y
401 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
402 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
405 # Compile fail-safe PMD
407 CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
410 # Compile Marvell PMD driver
412 CONFIG_RTE_LIBRTE_MRVL_PMD=n
415 # Compile virtual device driver for NetVSC on Hyper-V/Azure
417 CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
422 CONFIG_RTE_LIBRTE_PMD_NULL=y
425 # Compile software PMD backed by PCAP files
427 CONFIG_RTE_LIBRTE_PMD_PCAP=n
430 # Compile example software rings based PMD
432 CONFIG_RTE_LIBRTE_PMD_RING=y
433 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
434 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
437 # Compile SOFTNIC PMD
439 CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
442 # Compile the TAP PMD
443 # It is enabled by default for Linux only.
445 CONFIG_RTE_LIBRTE_PMD_TAP=n
448 # Do prefetch of packet data within PMD driver receive function
450 CONFIG_RTE_PMD_PACKET_PREFETCH=y
452 # Compile generic wireless base band device library
453 # EXPERIMENTAL: API may change without prior notice
455 CONFIG_RTE_LIBRTE_BBDEV=y
456 CONFIG_RTE_BBDEV_MAX_DEVS=128
459 # Compile PMD for NULL bbdev device
461 CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
464 # Compile PMD for turbo software bbdev device
466 CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
469 # Compile generic crypto device library
471 CONFIG_RTE_LIBRTE_CRYPTODEV=y
472 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
473 CONFIG_RTE_CRYPTO_MAX_DEVS=64
476 # Compile PMD for ARMv8 Crypto device
478 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
479 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
482 # Compile NXP DPAA2 crypto sec driver for CAAM HW
484 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
485 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
486 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
487 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
490 # NXP DPAA caam - crypto driver
492 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
493 CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
494 CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
495 CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
498 # Compile PMD for QuickAssist based devices
500 CONFIG_RTE_LIBRTE_PMD_QAT=n
501 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
502 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
503 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
504 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
506 # Number of sessions to create in the session memory pool
507 # on a single QuickAssist device.
509 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
512 # Compile PMD for AESNI backed device
514 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
515 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
518 # Compile PMD for Software backed device
520 CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
521 CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
524 # Compile PMD for AESNI GCM device
526 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
527 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
530 # Compile PMD for SNOW 3G device
532 CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
533 CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
536 # Compile PMD for KASUMI device
538 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
539 CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
542 # Compile PMD for ZUC device
544 CONFIG_RTE_LIBRTE_PMD_ZUC=n
545 CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
548 # Compile PMD for Crypto Scheduler device
550 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
551 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
554 # Compile PMD for NULL Crypto device
556 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
559 # Compile PMD for Marvell Crypto device
561 CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
562 CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
565 # Compile generic security library
567 CONFIG_RTE_LIBRTE_SECURITY=y
570 # Compile generic event device library
572 CONFIG_RTE_LIBRTE_EVENTDEV=y
573 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
574 CONFIG_RTE_EVENT_MAX_DEVS=16
575 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
578 # Compile PMD for skeleton event device
580 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
581 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
584 # Compile PMD for software event device
586 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
587 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
590 # Compile PMD for octeontx sso event device
592 CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
595 # Compile PMD for OPDL event device
597 CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
600 # Compile PMD for NXP DPAA event device
602 CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
605 # Compile PMD for NXP DPAA2 event device
607 CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
610 # Compile librte_ring
612 CONFIG_RTE_LIBRTE_RING=y
613 CONFIG_RTE_RING_USE_C11_MEM_MODEL=n
616 # Compile librte_mempool
618 CONFIG_RTE_LIBRTE_MEMPOOL=y
619 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
620 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
623 # Compile Mempool drivers
625 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
626 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
629 # Compile PMD for octeontx fpa mempool device
631 CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
634 # Compile librte_mbuf
636 CONFIG_RTE_LIBRTE_MBUF=y
637 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
638 CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
639 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
640 CONFIG_RTE_PKTMBUF_HEADROOM=128
643 # Compile librte_timer
645 CONFIG_RTE_LIBRTE_TIMER=y
646 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
649 # Compile librte_cfgfile
651 CONFIG_RTE_LIBRTE_CFGFILE=y
654 # Compile librte_cmdline
656 CONFIG_RTE_LIBRTE_CMDLINE=y
657 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
660 # Compile librte_hash
662 CONFIG_RTE_LIBRTE_HASH=y
663 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
668 CONFIG_RTE_LIBRTE_EFD=y
671 # Compile librte_member
673 CONFIG_RTE_LIBRTE_MEMBER=y
676 # Compile librte_jobstats
678 CONFIG_RTE_LIBRTE_JOBSTATS=y
681 # Compile the device metrics library
683 CONFIG_RTE_LIBRTE_METRICS=y
686 # Compile the bitrate statistics library
688 CONFIG_RTE_LIBRTE_BITRATE=y
691 # Compile the latency statistics library
693 CONFIG_RTE_LIBRTE_LATENCY_STATS=y
698 CONFIG_RTE_LIBRTE_LPM=y
699 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
704 CONFIG_RTE_LIBRTE_ACL=y
705 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
708 # Compile librte_power
710 CONFIG_RTE_LIBRTE_POWER=n
711 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
712 CONFIG_RTE_MAX_LCORE_FREQS=64
717 CONFIG_RTE_LIBRTE_NET=y
720 # Compile librte_ip_frag
722 CONFIG_RTE_LIBRTE_IP_FRAG=y
723 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
724 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
725 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
728 # Compile GRO library
730 CONFIG_RTE_LIBRTE_GRO=y
733 # Compile GSO library
735 CONFIG_RTE_LIBRTE_GSO=y
738 # Compile librte_meter
740 CONFIG_RTE_LIBRTE_METER=y
743 # Compile librte_classify
745 CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
748 # Compile librte_sched
750 CONFIG_RTE_LIBRTE_SCHED=y
751 CONFIG_RTE_SCHED_DEBUG=n
752 CONFIG_RTE_SCHED_RED=n
753 CONFIG_RTE_SCHED_COLLECT_STATS=n
754 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
755 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
756 CONFIG_RTE_SCHED_VECTOR=n
759 # Compile the distributor library
761 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
764 # Compile the reorder library
766 CONFIG_RTE_LIBRTE_REORDER=y
769 # Compile librte_port
771 CONFIG_RTE_LIBRTE_PORT=y
772 CONFIG_RTE_PORT_STATS_COLLECT=n
773 CONFIG_RTE_PORT_PCAP=n
776 # Compile librte_table
778 CONFIG_RTE_LIBRTE_TABLE=y
779 CONFIG_RTE_TABLE_STATS_COLLECT=n
782 # Compile librte_pipeline
784 CONFIG_RTE_LIBRTE_PIPELINE=y
785 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
790 CONFIG_RTE_LIBRTE_KNI=n
791 CONFIG_RTE_LIBRTE_PMD_KNI=n
792 CONFIG_RTE_KNI_KMOD=n
793 CONFIG_RTE_KNI_KMOD_ETHTOOL=n
794 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
797 # Compile the pdump library
799 CONFIG_RTE_LIBRTE_PDUMP=y
802 # Compile vhost user library
804 CONFIG_RTE_LIBRTE_VHOST=n
805 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
806 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
810 # To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
812 CONFIG_RTE_LIBRTE_PMD_VHOST=n
815 # Compile the test application
817 CONFIG_RTE_APP_TEST=y
818 CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
821 # Compile the procinfo application
823 CONFIG_RTE_PROC_INFO=n
826 # Compile the PMD test application
828 CONFIG_RTE_TEST_PMD=y
829 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
830 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
833 # Compile the bbdev test application
835 CONFIG_RTE_TEST_BBDEV=y
838 # Compile the crypto performance application
840 CONFIG_RTE_APP_CRYPTO_PERF=y
843 # Compile the eventdev application
845 CONFIG_RTE_APP_EVENTDEV=y