3 # Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
36 # CONFIG_RTE_EXEC_ENV can be linuxapp, bsdapp
38 CONFIG_RTE_EXEC_ENV="bsdapp"
39 CONFIG_RTE_EXEC_ENV_BSDAPP=y
42 ## machine can define specific variables or action for a specific board
43 ## RTE_MACHINE can be:
44 ## default nothing specific
45 ## native current machine
46 ## atm Intel® Atom™ microarchitecture
47 ## nhm Intel® microarchitecture code name Nehalem
48 ## wsm Intel® microarchitecture code name Westmere
49 ## snb Intel® microarchitecture code name Sandy Bridge
50 ## ivb Intel® microarchitecture code name Ivy Bridge
52 ## Note: if your compiler does not support the relevant -march options,
53 ## it will be compiled with whatever latest processor the compiler supports!
55 #CONFIG_RTE_MACHINE="native"
58 ## define the architecture we compile for.
59 ## CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
61 #CONFIG_RTE_ARCH="x86_64"
62 #CONFIG_RTE_ARCH_X86_64=y
65 ## The compiler we use.
66 ## Can be gcc, icc or clang.
68 #CONFIG_RTE_TOOLCHAIN="gcc"
69 #CONFIG_RTE_TOOLCHAIN_GCC=y
72 # Use intrinsics or assembly code for key routines
74 CONFIG_RTE_FORCE_INTRINSICS=n
77 # Compile to share library
79 CONFIG_RTE_BUILD_SHARED_LIB=n
82 # Combine to one single library
84 CONFIG_RTE_BUILD_COMBINE_LIBS=n
85 CONFIG_RTE_LIBNAME=intel_dpdk
88 # Compile Environment Abstraction Layer
90 CONFIG_RTE_LIBRTE_EAL=y
91 CONFIG_RTE_MAX_LCORE=128
92 CONFIG_RTE_MAX_NUMA_NODES=8
93 CONFIG_RTE_MAX_MEMSEG=256
94 CONFIG_RTE_MAX_MEMZONE=2560
95 CONFIG_RTE_MAX_TAILQ=32
96 CONFIG_RTE_LOG_LEVEL=8
97 CONFIG_RTE_LOG_HISTORY=256
98 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
99 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
102 # FreeBSD contiguous memory driver settings
104 CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
105 CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
106 CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
109 # Compile Environment Abstraction Layer for BSD
111 CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
114 # Compile Environment Abstraction Layer for linux
116 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=n
119 # Compile Environment Abstraction Layer to support hotplug
120 # So far, Hotplug functions only support linux
122 CONFIG_RTE_LIBRTE_EAL_HOTPLUG=n
125 # Compile Environment Abstraction Layer to support Vmware TSC map
127 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
130 # Compile the argument parser library
132 CONFIG_RTE_LIBRTE_KVARGS=y
135 # Compile generic ethernet library
137 CONFIG_RTE_LIBRTE_ETHER=y
138 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
139 CONFIG_RTE_MAX_ETHPORTS=32
140 CONFIG_RTE_MAX_QUEUES_PER_PORT=256
141 CONFIG_RTE_LIBRTE_IEEE1588=n
142 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
143 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
146 # Support NIC bypass logic
148 CONFIG_RTE_NIC_BYPASS=n
151 # Compile burst-oriented IGB & EM PMD drivers
153 CONFIG_RTE_LIBRTE_EM_PMD=y
154 CONFIG_RTE_LIBRTE_IGB_PMD=y
155 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
156 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
157 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
158 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
159 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
160 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
163 # Compile burst-oriented IXGBE PMD driver
165 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
166 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
167 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
168 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
169 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
170 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
171 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
172 CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
173 CONFIG_RTE_IXGBE_INC_VECTOR=n
174 CONFIG_RTE_IXGBE_RX_OLFLAGS_DISABLE=n
177 # Compile burst-oriented I40E PMD driver
179 CONFIG_RTE_LIBRTE_I40E_PMD=y
180 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
181 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
182 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
183 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
184 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
185 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=n
186 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
187 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
188 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
189 # interval up to 8160 us, aligned to 2 (or default value)
190 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
193 # Compile burst-oriented FM10K PMD
195 CONFIG_RTE_LIBRTE_FM10K_PMD=y
196 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
197 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
198 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
199 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
200 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
201 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
204 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
206 CONFIG_RTE_LIBRTE_MLX4_PMD=n
207 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
208 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
209 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
210 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
211 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
214 # Compile burst-oriented Cisco ENIC PMD driver
216 CONFIG_RTE_LIBRTE_ENIC_PMD=y
217 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
220 # Compile burst-oriented VIRTIO PMD driver
222 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
223 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
224 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
225 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
226 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
227 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
230 # Compile burst-oriented VMXNET3 PMD driver
232 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
233 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
234 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
235 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
236 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
237 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
240 # Compile example software rings based PMD
242 CONFIG_RTE_LIBRTE_PMD_RING=y
243 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
244 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
247 # Compile software PMD backed by PCAP files
249 CONFIG_RTE_LIBRTE_PMD_PCAP=y
252 # Compile link bonding PMD library
254 CONFIG_RTE_LIBRTE_PMD_BOND=y
255 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
256 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
261 CONFIG_RTE_LIBRTE_PMD_NULL=y
264 # Do prefetch of packet data within PMD driver receive function
266 CONFIG_RTE_PMD_PACKET_PREFETCH=y
269 # Compile librte_ring
271 CONFIG_RTE_LIBRTE_RING=y
272 CONFIG_RTE_LIBRTE_RING_DEBUG=n
273 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
274 CONFIG_RTE_RING_PAUSE_REP_COUNT=0
277 # Compile librte_mempool
279 CONFIG_RTE_LIBRTE_MEMPOOL=y
280 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
281 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
284 # Compile librte_mbuf
286 CONFIG_RTE_LIBRTE_MBUF=y
287 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
288 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
289 CONFIG_RTE_PKTMBUF_HEADROOM=128
292 # Compile librte_timer
294 CONFIG_RTE_LIBRTE_TIMER=y
295 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
298 # Compile librte_malloc
300 CONFIG_RTE_LIBRTE_MALLOC=y
301 CONFIG_RTE_LIBRTE_MALLOC_DEBUG=n
302 CONFIG_RTE_MALLOC_MEMZONE_SIZE=11M
305 # Compile librte_cfgfile
307 CONFIG_RTE_LIBRTE_CFGFILE=y
310 # Compile librte_cmdline
312 CONFIG_RTE_LIBRTE_CMDLINE=y
313 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
316 # Compile librte_hash
318 CONFIG_RTE_LIBRTE_HASH=y
319 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
322 # Compile librte_jobstats
324 CONFIG_RTE_LIBRTE_JOBSTATS=y
329 CONFIG_RTE_LIBRTE_LPM=y
330 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
335 CONFIG_RTE_LIBRTE_ACL=y
336 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
339 # Compile librte_power
341 CONFIG_RTE_LIBRTE_POWER=n
342 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
343 CONFIG_RTE_MAX_LCORE_FREQS=64
348 CONFIG_RTE_LIBRTE_NET=y
351 # Compile librte_ip_frag
353 CONFIG_RTE_LIBRTE_IP_FRAG=y
354 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
355 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
356 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
359 # Compile librte_meter
361 CONFIG_RTE_LIBRTE_METER=y
364 # Compile librte_sched
366 CONFIG_RTE_LIBRTE_SCHED=y
367 CONFIG_RTE_SCHED_RED=n
368 CONFIG_RTE_SCHED_COLLECT_STATS=n
369 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
370 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
373 # Compile the distributor library
375 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
378 # Compile the reorder library
380 CONFIG_RTE_LIBRTE_REORDER=y
383 # Compile librte_port
385 CONFIG_RTE_LIBRTE_PORT=y
388 # Compile librte_table
390 CONFIG_RTE_LIBRTE_TABLE=y
393 # Compile librte_pipeline
395 CONFIG_RTE_LIBRTE_PIPELINE=y
400 CONFIG_RTE_LIBRTE_KNI=n
401 CONFIG_RTE_KNI_KO_DEBUG=n
402 CONFIG_RTE_KNI_VHOST=n
403 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
404 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
405 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
406 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
409 # Enable warning directives
411 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
414 # Compile the test application
416 CONFIG_RTE_APP_TEST=y
419 # Compile the PMD test application
421 CONFIG_RTE_TEST_PMD=y
422 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
423 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n