3 # Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
36 # CONFIG_RTE_EXEC_ENV can be linuxapp, bsdapp
38 CONFIG_RTE_EXEC_ENV="linuxapp"
39 CONFIG_RTE_EXEC_ENV_LINUXAPP=y
42 ## machine can define specific variables or action for a specific board
43 ## RTE_MACHINE can be:
44 ## default nothing specific
45 ## native current machine
46 ## atm Intel® Atom™ microarchitecture
47 ## nhm Intel® microarchitecture code name Nehalem
48 ## wsm Intel® microarchitecture code name Westmere
49 ## snb Intel® microarchitecture code name Sandy Bridge
50 ## ivb Intel® microarchitecture code name Ivy Bridge
52 ## Note: if your compiler does not support the relevant -march options,
53 ## it will be compiled with whatever latest processor the compiler supports!
55 #CONFIG_RTE_MACHINE="native"
58 ## define the architecture we compile for.
59 ## CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
61 #CONFIG_RTE_ARCH="x86_64"
62 #CONFIG_RTE_ARCH_X86_64=y
65 ## The compiler we use.
66 ## Can be gcc, icc or clang.
68 #CONFIG_RTE_TOOLCHAIN="gcc"
69 #CONFIG_RTE_TOOLCHAIN_GCC=y
72 # Use intrinsics or assembly code for key routines
74 CONFIG_RTE_FORCE_INTRINSICS=n
77 # Machine forces strict alignment constraints.
79 CONFIG_RTE_ARCH_STRICT_ALIGN=n
82 # Compile to share library
84 CONFIG_RTE_BUILD_SHARED_LIB=n
87 # Combine to one single library
89 CONFIG_RTE_BUILD_COMBINE_LIBS=n
92 # Use newest code breaking previous ABI
97 # Compile Environment Abstraction Layer
99 CONFIG_RTE_LIBRTE_EAL=y
100 CONFIG_RTE_MAX_LCORE=128
101 CONFIG_RTE_MAX_NUMA_NODES=8
102 CONFIG_RTE_MAX_MEMSEG=256
103 CONFIG_RTE_MAX_MEMZONE=2560
104 CONFIG_RTE_MAX_TAILQ=32
105 CONFIG_RTE_LOG_LEVEL=8
106 CONFIG_RTE_LOG_HISTORY=256
107 CONFIG_RTE_LIBEAL_USE_HPET=n
108 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
109 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
110 CONFIG_RTE_EAL_IGB_UIO=y
111 CONFIG_RTE_EAL_VFIO=y
112 CONFIG_RTE_MALLOC_DEBUG=n
114 # Default driver path (or "" to disable)
115 CONFIG_RTE_EAL_PMD_PATH=""
118 # Special configurations in PCI Config Space for high performance
120 CONFIG_RTE_PCI_CONFIG=n
121 CONFIG_RTE_PCI_EXTENDED_TAG=""
122 CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
125 # Compile Environment Abstraction Layer for linux
127 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
130 # Compile Environment Abstraction Layer to support Vmware TSC map
132 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
135 # Compile the argument parser library
137 CONFIG_RTE_LIBRTE_KVARGS=y
140 # Compile generic ethernet library
142 CONFIG_RTE_LIBRTE_ETHER=y
143 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
144 CONFIG_RTE_MAX_ETHPORTS=32
145 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
146 CONFIG_RTE_LIBRTE_IEEE1588=n
147 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
148 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
151 # Support NIC bypass logic
153 CONFIG_RTE_NIC_BYPASS=n
156 # Compile burst-oriented IGB & EM PMD drivers
158 CONFIG_RTE_LIBRTE_EM_PMD=y
159 CONFIG_RTE_LIBRTE_IGB_PMD=y
160 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
161 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
162 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
163 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
164 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
165 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
168 # Compile burst-oriented IXGBE PMD driver
170 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
171 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
172 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
173 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
174 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
175 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
176 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
177 CONFIG_RTE_IXGBE_INC_VECTOR=y
178 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
181 # Compile burst-oriented I40E PMD driver
183 CONFIG_RTE_LIBRTE_I40E_PMD=y
184 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
185 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
186 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
187 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
188 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
189 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
190 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
191 CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
192 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
193 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
194 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
195 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
196 # interval up to 8160 us, aligned to 2 (or default value)
197 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
200 # Compile burst-oriented FM10K PMD
202 CONFIG_RTE_LIBRTE_FM10K_PMD=y
203 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
204 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
205 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
206 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
207 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
208 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
209 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
212 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
214 CONFIG_RTE_LIBRTE_MLX4_PMD=n
215 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
216 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
217 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
218 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
219 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
222 # Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
224 CONFIG_RTE_LIBRTE_MLX5_PMD=n
225 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
226 CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
227 CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
228 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
231 # Compile burst-oriented Broadcom PMD driver
233 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
234 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
235 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
236 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
237 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
238 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
241 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
243 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
244 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
245 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
246 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
247 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
248 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
251 # Compile burst-oriented Cisco ENIC PMD driver
253 CONFIG_RTE_LIBRTE_ENIC_PMD=y
254 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
257 # Compile burst-oriented Netronome NFP PMD driver
259 CONFIG_RTE_LIBRTE_NFP_PMD=n
260 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
263 # Compile software PMD backed by SZEDATA2 device
265 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
268 # Compile burst-oriented VIRTIO PMD driver
270 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
271 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
272 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
273 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
274 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
275 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
278 # Compile burst-oriented VMXNET3 PMD driver
280 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
281 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
282 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
283 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
284 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
285 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
288 # Compile example software rings based PMD
290 CONFIG_RTE_LIBRTE_PMD_RING=y
291 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
292 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
295 # Compile software PMD backed by PCAP files
297 CONFIG_RTE_LIBRTE_PMD_PCAP=n
300 # Compile link bonding PMD library
302 CONFIG_RTE_LIBRTE_PMD_BOND=y
303 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
304 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
307 # Compile software PMD backed by AF_PACKET sockets (Linux only)
309 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
314 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
319 CONFIG_RTE_LIBRTE_PMD_NULL=y
322 # Do prefetch of packet data within PMD driver receive function
324 CONFIG_RTE_PMD_PACKET_PREFETCH=y
327 # Compile generic crypto device library
328 # EXPERIMENTAL: API may change without prior notice
330 CONFIG_RTE_LIBRTE_CRYPTODEV=y
331 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
332 CONFIG_RTE_CRYPTO_MAX_DEVS=64
333 CONFIG_RTE_CRYPTODEV_NAME_LEN=64
336 # Compile PMD for QuickAssist based devices
338 CONFIG_RTE_LIBRTE_PMD_QAT=n
339 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
340 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
341 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
342 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
344 # Number of sessions to create in the session memory pool
345 # on a single QuickAssist device.
347 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
350 # Compile PMD for AESNI backed device
352 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
353 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
354 CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
355 CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
358 # Compile librte_ring
360 CONFIG_RTE_LIBRTE_RING=y
361 CONFIG_RTE_LIBRTE_RING_DEBUG=n
362 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
363 CONFIG_RTE_RING_PAUSE_REP_COUNT=0
366 # Compile librte_mempool
368 CONFIG_RTE_LIBRTE_MEMPOOL=y
369 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
370 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
373 # Compile librte_mbuf
375 CONFIG_RTE_LIBRTE_MBUF=y
376 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
377 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
378 CONFIG_RTE_PKTMBUF_HEADROOM=128
381 # Compile librte_mbuf_offload
383 CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
384 CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
387 # Compile librte_timer
389 CONFIG_RTE_LIBRTE_TIMER=y
390 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
393 # Compile librte_cfgfile
395 CONFIG_RTE_LIBRTE_CFGFILE=y
398 # Compile librte_cmdline
400 CONFIG_RTE_LIBRTE_CMDLINE=y
401 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
404 # Compile librte_hash
406 CONFIG_RTE_LIBRTE_HASH=y
407 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
410 # Compile librte_jobstats
412 CONFIG_RTE_LIBRTE_JOBSTATS=y
417 CONFIG_RTE_LIBRTE_LPM=y
418 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
423 CONFIG_RTE_LIBRTE_ACL=y
424 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
427 # Compile librte_power
429 CONFIG_RTE_LIBRTE_POWER=y
430 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
431 CONFIG_RTE_MAX_LCORE_FREQS=64
436 CONFIG_RTE_LIBRTE_NET=y
439 # Compile librte_ip_frag
441 CONFIG_RTE_LIBRTE_IP_FRAG=y
442 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
443 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
444 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
447 # Compile librte_meter
449 CONFIG_RTE_LIBRTE_METER=y
452 # Compile librte_sched
454 CONFIG_RTE_LIBRTE_SCHED=y
455 CONFIG_RTE_SCHED_DEBUG=n
456 CONFIG_RTE_SCHED_RED=n
457 CONFIG_RTE_SCHED_COLLECT_STATS=n
458 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
459 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
460 CONFIG_RTE_SCHED_VECTOR=n
463 # Compile the distributor library
465 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
468 # Compile the reorder library
470 CONFIG_RTE_LIBRTE_REORDER=y
473 # Compile librte_port
475 CONFIG_RTE_LIBRTE_PORT=y
476 CONFIG_RTE_PORT_STATS_COLLECT=n
479 # Compile librte_table
481 CONFIG_RTE_LIBRTE_TABLE=y
482 CONFIG_RTE_TABLE_STATS_COLLECT=n
485 # Compile librte_pipeline
487 CONFIG_RTE_LIBRTE_PIPELINE=y
488 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
493 CONFIG_RTE_LIBRTE_KNI=y
494 CONFIG_RTE_KNI_KMOD=y
495 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
496 CONFIG_RTE_KNI_KO_DEBUG=n
497 CONFIG_RTE_KNI_VHOST=n
498 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
499 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
500 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
501 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
504 # Compile vhost library
505 # fuse-devel is needed to run vhost-cuse.
506 # fuse-devel enables user space char driver development
507 # vhost-user is turned on by default.
509 CONFIG_RTE_LIBRTE_VHOST=y
510 CONFIG_RTE_LIBRTE_VHOST_USER=y
511 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
512 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
515 #Compile Xen domain0 support
517 CONFIG_RTE_LIBRTE_XEN_DOM0=n
520 # Enable warning directives
522 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
525 # Compile the test application
527 CONFIG_RTE_APP_TEST=y
530 # Compile the PMD test application
532 CONFIG_RTE_TEST_PMD=y
533 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
534 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n