3 # Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
35 # RTE_EXEC_ENV values are the directories in mk/exec-env/
37 CONFIG_RTE_EXEC_ENV="linuxapp"
38 CONFIG_RTE_EXEC_ENV_LINUXAPP=y
41 ## machine can define specific variables or action for a specific board
42 ## RTE_MACHINE values are the directories in mk/machine/
44 #CONFIG_RTE_MACHINE="native"
47 ## define the architecture we compile for.
48 ## RTE_ARCH values are the directories in mk/arch/
50 #CONFIG_RTE_ARCH="x86_64"
51 #CONFIG_RTE_ARCH_X86_64=y
52 #CONFIG_RTE_ARCH_X86=y
55 ## The compiler we use.
56 ## RTE_TOOLCHAIN values are the directories in mk/toolchain/
58 #CONFIG_RTE_TOOLCHAIN="gcc"
59 #CONFIG_RTE_TOOLCHAIN_GCC=y
62 # Use intrinsics or assembly code for key routines
64 CONFIG_RTE_FORCE_INTRINSICS=n
67 # Machine forces strict alignment constraints.
69 CONFIG_RTE_ARCH_STRICT_ALIGN=n
72 # Compile to share library
74 CONFIG_RTE_BUILD_SHARED_LIB=n
77 # Combine to one single library
79 CONFIG_RTE_BUILD_COMBINE_LIBS=n
82 # Use newest code breaking previous ABI
87 # Compile Environment Abstraction Layer
89 CONFIG_RTE_LIBRTE_EAL=y
90 CONFIG_RTE_MAX_LCORE=128
91 CONFIG_RTE_MAX_NUMA_NODES=8
92 CONFIG_RTE_MAX_MEMSEG=256
93 CONFIG_RTE_MAX_MEMZONE=2560
94 CONFIG_RTE_MAX_TAILQ=32
95 CONFIG_RTE_LOG_LEVEL=8
96 CONFIG_RTE_LOG_HISTORY=256
97 CONFIG_RTE_LIBEAL_USE_HPET=n
98 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
99 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
100 CONFIG_RTE_EAL_IGB_UIO=y
101 CONFIG_RTE_EAL_VFIO=y
102 CONFIG_RTE_MALLOC_DEBUG=n
104 # Default driver path (or "" to disable)
105 CONFIG_RTE_EAL_PMD_PATH=""
108 # Special configurations in PCI Config Space for high performance
110 CONFIG_RTE_PCI_CONFIG=n
111 CONFIG_RTE_PCI_EXTENDED_TAG=""
112 CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
115 # Compile Environment Abstraction Layer for linux
117 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
120 # Compile Environment Abstraction Layer to support Vmware TSC map
122 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
125 # Compile the argument parser library
127 CONFIG_RTE_LIBRTE_KVARGS=y
130 # Compile generic ethernet library
132 CONFIG_RTE_LIBRTE_ETHER=y
133 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
134 CONFIG_RTE_MAX_ETHPORTS=32
135 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
136 CONFIG_RTE_LIBRTE_IEEE1588=n
137 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
138 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
141 # Support NIC bypass logic
143 CONFIG_RTE_NIC_BYPASS=n
146 # Compile burst-oriented IGB & EM PMD drivers
148 CONFIG_RTE_LIBRTE_EM_PMD=y
149 CONFIG_RTE_LIBRTE_IGB_PMD=y
150 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
151 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
152 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
153 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
154 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
155 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
158 # Compile burst-oriented IXGBE PMD driver
160 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
161 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
162 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
163 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
164 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
165 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
166 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
167 CONFIG_RTE_IXGBE_INC_VECTOR=y
168 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
171 # Compile burst-oriented I40E PMD driver
173 CONFIG_RTE_LIBRTE_I40E_PMD=y
174 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
175 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
176 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
177 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
178 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
179 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
180 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
181 CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
182 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
183 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
184 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
185 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
186 # interval up to 8160 us, aligned to 2 (or default value)
187 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
190 # Compile burst-oriented FM10K PMD
192 CONFIG_RTE_LIBRTE_FM10K_PMD=y
193 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
194 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
195 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
196 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
197 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
198 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
199 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
202 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
204 CONFIG_RTE_LIBRTE_MLX4_PMD=n
205 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
206 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
207 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
208 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
209 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
212 # Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
214 CONFIG_RTE_LIBRTE_MLX5_PMD=n
215 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
216 CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
217 CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
218 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
221 # Compile burst-oriented Broadcom PMD driver
223 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
224 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
225 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
226 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
227 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
228 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
229 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
232 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
234 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
235 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
236 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
237 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
238 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
239 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
242 # Compile burst-oriented Cisco ENIC PMD driver
244 CONFIG_RTE_LIBRTE_ENIC_PMD=y
245 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
248 # Compile burst-oriented Netronome NFP PMD driver
250 CONFIG_RTE_LIBRTE_NFP_PMD=n
251 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
254 # Compile software PMD backed by SZEDATA2 device
256 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
259 # Compile burst-oriented VIRTIO PMD driver
261 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
262 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
263 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
264 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
265 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
266 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
269 # Compile burst-oriented VMXNET3 PMD driver
271 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
272 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
273 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
274 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
275 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
276 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
279 # Compile example software rings based PMD
281 CONFIG_RTE_LIBRTE_PMD_RING=y
282 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
283 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
286 # Compile software PMD backed by PCAP files
288 CONFIG_RTE_LIBRTE_PMD_PCAP=n
291 # Compile link bonding PMD library
293 CONFIG_RTE_LIBRTE_PMD_BOND=y
294 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
295 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
298 # Compile software PMD backed by AF_PACKET sockets (Linux only)
300 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
305 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
310 CONFIG_RTE_LIBRTE_PMD_NULL=y
313 # Do prefetch of packet data within PMD driver receive function
315 CONFIG_RTE_PMD_PACKET_PREFETCH=y
318 # Compile generic crypto device library
319 # EXPERIMENTAL: API may change without prior notice
321 CONFIG_RTE_LIBRTE_CRYPTODEV=y
322 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
323 CONFIG_RTE_CRYPTO_MAX_DEVS=64
324 CONFIG_RTE_CRYPTODEV_NAME_LEN=64
327 # Compile PMD for QuickAssist based devices
329 CONFIG_RTE_LIBRTE_PMD_QAT=n
330 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
331 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
332 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
333 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
335 # Number of sessions to create in the session memory pool
336 # on a single QuickAssist device.
338 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
341 # Compile PMD for AESNI backed device
343 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
344 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
345 CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
346 CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
349 # Compile librte_ring
351 CONFIG_RTE_LIBRTE_RING=y
352 CONFIG_RTE_LIBRTE_RING_DEBUG=n
353 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
354 CONFIG_RTE_RING_PAUSE_REP_COUNT=0
357 # Compile librte_mempool
359 CONFIG_RTE_LIBRTE_MEMPOOL=y
360 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
361 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
364 # Compile librte_mbuf
366 CONFIG_RTE_LIBRTE_MBUF=y
367 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
368 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
369 CONFIG_RTE_PKTMBUF_HEADROOM=128
372 # Compile librte_mbuf_offload
373 # EXPERIMENTAL: API may change without prior notice
375 CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
376 CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
379 # Compile librte_timer
381 CONFIG_RTE_LIBRTE_TIMER=y
382 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
385 # Compile librte_cfgfile
387 CONFIG_RTE_LIBRTE_CFGFILE=y
390 # Compile librte_cmdline
392 CONFIG_RTE_LIBRTE_CMDLINE=y
393 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
396 # Compile librte_hash
398 CONFIG_RTE_LIBRTE_HASH=y
399 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
402 # Compile librte_jobstats
404 CONFIG_RTE_LIBRTE_JOBSTATS=y
409 CONFIG_RTE_LIBRTE_LPM=y
410 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
415 CONFIG_RTE_LIBRTE_ACL=y
416 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
419 # Compile librte_power
421 CONFIG_RTE_LIBRTE_POWER=y
422 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
423 CONFIG_RTE_MAX_LCORE_FREQS=64
428 CONFIG_RTE_LIBRTE_NET=y
431 # Compile librte_ip_frag
433 CONFIG_RTE_LIBRTE_IP_FRAG=y
434 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
435 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
436 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
439 # Compile librte_meter
441 CONFIG_RTE_LIBRTE_METER=y
444 # Compile librte_sched
446 CONFIG_RTE_LIBRTE_SCHED=y
447 CONFIG_RTE_SCHED_DEBUG=n
448 CONFIG_RTE_SCHED_RED=n
449 CONFIG_RTE_SCHED_COLLECT_STATS=n
450 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
451 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
452 CONFIG_RTE_SCHED_VECTOR=n
455 # Compile the distributor library
457 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
460 # Compile the reorder library
462 CONFIG_RTE_LIBRTE_REORDER=y
465 # Compile librte_port
467 CONFIG_RTE_LIBRTE_PORT=y
468 CONFIG_RTE_PORT_STATS_COLLECT=n
471 # Compile librte_table
473 CONFIG_RTE_LIBRTE_TABLE=y
474 CONFIG_RTE_TABLE_STATS_COLLECT=n
477 # Compile librte_pipeline
479 CONFIG_RTE_LIBRTE_PIPELINE=y
480 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
485 CONFIG_RTE_LIBRTE_KNI=y
486 CONFIG_RTE_KNI_KMOD=y
487 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
488 CONFIG_RTE_KNI_KO_DEBUG=n
489 CONFIG_RTE_KNI_VHOST=n
490 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
491 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
492 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
493 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
496 # Compile vhost library
497 # fuse-devel is needed to run vhost-cuse.
498 # fuse-devel enables user space char driver development
499 # vhost-user is turned on by default.
501 CONFIG_RTE_LIBRTE_VHOST=y
502 CONFIG_RTE_LIBRTE_VHOST_USER=y
503 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
504 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
507 #Compile Xen domain0 support
509 CONFIG_RTE_LIBRTE_XEN_DOM0=n
512 # Enable warning directives
514 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
517 # Compile the test application
519 CONFIG_RTE_APP_TEST=y
522 # Compile the PMD test application
524 CONFIG_RTE_TEST_PMD=y
525 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
526 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n