3 # Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
36 # CONFIG_RTE_EXEC_ENV can be linuxapp, bsdapp
38 CONFIG_RTE_EXEC_ENV="linuxapp"
39 CONFIG_RTE_EXEC_ENV_LINUXAPP=y
42 ## machine can define specific variables or action for a specific board
43 ## RTE_MACHINE can be:
44 ## default nothing specific
45 ## native current machine
46 ## atm Intel® Atom™ microarchitecture
47 ## nhm Intel® microarchitecture code name Nehalem
48 ## wsm Intel® microarchitecture code name Westmere
49 ## snb Intel® microarchitecture code name Sandy Bridge
50 ## ivb Intel® microarchitecture code name Ivy Bridge
52 ## Note: if your compiler does not support the relevant -march options,
53 ## it will be compiled with whatever latest processor the compiler supports!
55 #CONFIG_RTE_MACHINE="native"
58 ## define the architecture we compile for.
59 ## CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
61 #CONFIG_RTE_ARCH="x86_64"
62 #CONFIG_RTE_ARCH_X86_64=y
65 ## The compiler we use.
66 ## Can be gcc, icc or clang.
68 #CONFIG_RTE_TOOLCHAIN="gcc"
69 #CONFIG_RTE_TOOLCHAIN_GCC=y
72 # Use intrinsics or assembly code for key routines
74 CONFIG_RTE_FORCE_INTRINSICS=n
77 # Machine forces strict alignment constraints.
79 CONFIG_RTE_ARCH_STRICT_ALIGN=n
82 # Compile to share library
84 CONFIG_RTE_BUILD_SHARED_LIB=n
87 # Combine to one single library
89 CONFIG_RTE_BUILD_COMBINE_LIBS=n
92 # Use newest code breaking previous ABI
97 # Compile Environment Abstraction Layer
99 CONFIG_RTE_LIBRTE_EAL=y
100 CONFIG_RTE_MAX_LCORE=128
101 CONFIG_RTE_MAX_NUMA_NODES=8
102 CONFIG_RTE_MAX_MEMSEG=256
103 CONFIG_RTE_MAX_MEMZONE=2560
104 CONFIG_RTE_MAX_TAILQ=32
105 CONFIG_RTE_LOG_LEVEL=8
106 CONFIG_RTE_LOG_HISTORY=256
107 CONFIG_RTE_LIBEAL_USE_HPET=n
108 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
109 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
110 CONFIG_RTE_EAL_IGB_UIO=y
111 CONFIG_RTE_EAL_VFIO=y
112 CONFIG_RTE_MALLOC_DEBUG=n
115 # Special configurations in PCI Config Space for high performance
117 CONFIG_RTE_PCI_CONFIG=n
118 CONFIG_RTE_PCI_EXTENDED_TAG=""
119 CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
122 # Compile Environment Abstraction Layer for linux
124 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
127 # Compile Environment Abstraction Layer to support Vmware TSC map
129 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
132 # Compile the argument parser library
134 CONFIG_RTE_LIBRTE_KVARGS=y
137 # Compile generic ethernet library
139 CONFIG_RTE_LIBRTE_ETHER=y
140 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
141 CONFIG_RTE_MAX_ETHPORTS=32
142 CONFIG_RTE_MAX_QUEUES_PER_PORT=256
143 CONFIG_RTE_LIBRTE_IEEE1588=n
144 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
145 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
148 # Support NIC bypass logic
150 CONFIG_RTE_NIC_BYPASS=n
153 # Compile burst-oriented IGB & EM PMD drivers
155 CONFIG_RTE_LIBRTE_EM_PMD=y
156 CONFIG_RTE_LIBRTE_IGB_PMD=y
157 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
158 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
159 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
160 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
161 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
162 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
165 # Compile burst-oriented IXGBE PMD driver
167 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
168 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
169 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
170 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
171 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
172 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
173 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
174 CONFIG_RTE_IXGBE_INC_VECTOR=y
175 CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
178 # Compile burst-oriented I40E PMD driver
180 CONFIG_RTE_LIBRTE_I40E_PMD=y
181 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
182 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
183 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
184 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
185 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
186 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
187 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
188 CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
189 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
190 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
191 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
192 # interval up to 8160 us, aligned to 2 (or default value)
193 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
196 # Compile burst-oriented FM10K PMD
198 CONFIG_RTE_LIBRTE_FM10K_PMD=y
199 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
200 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
201 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
202 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
203 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
204 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
207 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
209 CONFIG_RTE_LIBRTE_MLX4_PMD=n
210 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
211 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
212 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
213 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
214 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
217 # Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
219 CONFIG_RTE_LIBRTE_MLX5_PMD=n
220 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
221 CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
222 CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
223 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
226 # Compile burst-oriented Broadcom PMD driver
228 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
229 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
230 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
231 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
232 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
233 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
236 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
238 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
239 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
240 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
241 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
242 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
243 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
246 # Compile burst-oriented Cisco ENIC PMD driver
248 CONFIG_RTE_LIBRTE_ENIC_PMD=y
249 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
252 # Compile burst-oriented VIRTIO PMD driver
254 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
255 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
256 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
257 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
258 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
259 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
262 # Compile burst-oriented VMXNET3 PMD driver
264 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
265 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
266 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
267 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
268 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
269 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
272 # Compile example software rings based PMD
274 CONFIG_RTE_LIBRTE_PMD_RING=y
275 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
276 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
279 # Compile software PMD backed by PCAP files
281 CONFIG_RTE_LIBRTE_PMD_PCAP=n
284 # Compile link bonding PMD library
286 CONFIG_RTE_LIBRTE_PMD_BOND=y
287 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
288 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
291 # Compile software PMD backed by AF_PACKET sockets (Linux only)
293 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
298 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
303 CONFIG_RTE_LIBRTE_PMD_NULL=y
306 # Do prefetch of packet data within PMD driver receive function
308 CONFIG_RTE_PMD_PACKET_PREFETCH=y
311 # Compile librte_ring
313 CONFIG_RTE_LIBRTE_RING=y
314 CONFIG_RTE_LIBRTE_RING_DEBUG=n
315 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
316 CONFIG_RTE_RING_PAUSE_REP_COUNT=0
319 # Compile librte_mempool
321 CONFIG_RTE_LIBRTE_MEMPOOL=y
322 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
323 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
326 # Compile librte_mbuf
328 CONFIG_RTE_LIBRTE_MBUF=y
329 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
330 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
331 CONFIG_RTE_PKTMBUF_HEADROOM=128
334 # Compile librte_timer
336 CONFIG_RTE_LIBRTE_TIMER=y
337 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
340 # Compile librte_cfgfile
342 CONFIG_RTE_LIBRTE_CFGFILE=y
345 # Compile librte_cmdline
347 CONFIG_RTE_LIBRTE_CMDLINE=y
348 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
351 # Compile librte_hash
353 CONFIG_RTE_LIBRTE_HASH=y
354 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
357 # Compile librte_jobstats
359 CONFIG_RTE_LIBRTE_JOBSTATS=y
364 CONFIG_RTE_LIBRTE_LPM=y
365 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
370 CONFIG_RTE_LIBRTE_ACL=y
371 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
374 # Compile librte_power
376 CONFIG_RTE_LIBRTE_POWER=y
377 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
378 CONFIG_RTE_MAX_LCORE_FREQS=64
383 CONFIG_RTE_LIBRTE_NET=y
386 # Compile librte_ip_frag
388 CONFIG_RTE_LIBRTE_IP_FRAG=y
389 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
390 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
391 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
394 # Compile librte_meter
396 CONFIG_RTE_LIBRTE_METER=y
399 # Compile librte_sched
401 CONFIG_RTE_LIBRTE_SCHED=y
402 CONFIG_RTE_SCHED_RED=n
403 CONFIG_RTE_SCHED_COLLECT_STATS=n
404 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
405 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
408 # Compile the distributor library
410 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
413 # Compile the reorder library
415 CONFIG_RTE_LIBRTE_REORDER=y
418 # Compile librte_port
420 CONFIG_RTE_LIBRTE_PORT=y
421 CONFIG_RTE_PORT_STATS_COLLECT=n
424 # Compile librte_table
426 CONFIG_RTE_LIBRTE_TABLE=y
427 CONFIG_RTE_TABLE_STATS_COLLECT=n
430 # Compile librte_pipeline
432 CONFIG_RTE_LIBRTE_PIPELINE=y
433 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
438 CONFIG_RTE_LIBRTE_KNI=y
439 CONFIG_RTE_KNI_KMOD=y
440 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
441 CONFIG_RTE_KNI_KO_DEBUG=n
442 CONFIG_RTE_KNI_VHOST=n
443 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
444 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
445 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
446 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
449 # Compile vhost library
450 # fuse-devel is needed to run vhost-cuse.
451 # fuse-devel enables user space char driver development
452 # vhost-user is turned on by default.
454 CONFIG_RTE_LIBRTE_VHOST=y
455 CONFIG_RTE_LIBRTE_VHOST_USER=y
456 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
457 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
460 #Compile Xen domain0 support
462 CONFIG_RTE_LIBRTE_XEN_DOM0=n
465 # Enable warning directives
467 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
470 # Compile the test application
472 CONFIG_RTE_APP_TEST=y
475 # Compile the PMD test application
477 CONFIG_RTE_TEST_PMD=y
478 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
479 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n