3 # Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
36 # CONFIG_RTE_EXEC_ENV can be linuxapp, baremetal, bsdapp
38 CONFIG_RTE_EXEC_ENV="bsdapp"
39 CONFIG_RTE_EXEC_ENV_BSDAPP=y
42 # machine can define specific variables or action for a specific board
44 # default nothing specific
45 # native current machine
46 # atm Intel® Atom™ microarchitecture
47 # nhm Intel® microarchitecture code name Nehalem
48 # wsm Intel® microarchitecture code name Westmere
49 # snb Intel® microarchitecture code name Sandy Bridge
50 # ivb Intel® microarchitecture code name Ivy Bridge
52 # Note: if your compiler does not support the relevant -march options,
53 # it will be compiled with whatever latest processor the compiler supports!
55 CONFIG_RTE_MACHINE="native"
58 # define the architecture we compile for.
59 # CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
61 CONFIG_RTE_ARCH="x86_64"
62 CONFIG_RTE_ARCH_X86_64=y
65 # The compiler we use.
68 CONFIG_RTE_TOOLCHAIN="gcc"
69 CONFIG_RTE_TOOLCHAIN_GCC=y
72 # Use intrinsics or assembly code for key routines
74 CONFIG_RTE_FORCE_INTRINSICS=n
77 # Compile to share library
79 CONFIG_RTE_LIBNAME=intel_dpdk
80 CONFIG_RTE_BUILD_SHARED_LIB=n
83 # Combine to one single library
85 CONFIG_RTE_BUILD_COMBINE_LIBS=n
88 # Compile Environment Abstraction Layer
90 CONFIG_RTE_LIBRTE_EAL=y
91 CONFIG_RTE_MAX_LCORE=64
92 CONFIG_RTE_MAX_NUMA_NODES=8
93 CONFIG_RTE_MAX_MEMSEG=256
94 CONFIG_RTE_MAX_MEMZONE=2560
95 CONFIG_RTE_MAX_TAILQ=32
96 CONFIG_RTE_LOG_LEVEL=8
97 CONFIG_RTE_LOG_HISTORY=256
98 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
99 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
102 # FreeBSD contiguous memory driver settings
104 CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
105 CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
106 CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
109 # Compile Environment Abstraction Layer for BSD
111 CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
114 # Compile Environment Abstraction Layer for linux
116 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=n
119 # Compile Environment Abstraction Layer for Bare metal
121 CONFIG_RTE_LIBRTE_EAL_BAREMETAL=n
124 # Compile Environment Abstraction Layer to support Vmware TSC map
126 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
129 # Compile generic ethernet library
131 CONFIG_RTE_LIBRTE_ETHER=y
132 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
133 CONFIG_RTE_MAX_ETHPORTS=32
134 CONFIG_RTE_LIBRTE_IEEE1588=n
135 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
138 # Compile burst-oriented IGB & EM PMD drivers
140 CONFIG_RTE_LIBRTE_EM_PMD=y
141 CONFIG_RTE_LIBRTE_IGB_PMD=y
142 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
143 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
144 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
145 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
146 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
147 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
150 # Compile burst-oriented IXGBE PMD driver
152 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
153 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
154 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
155 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
156 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
157 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
158 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
159 CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
160 CONFIG_RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP=n
163 # Compile burst-oriented VIRTIO PMD driver
165 CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
166 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
167 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
168 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
169 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
170 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
173 # Compile example software rings based PMD
175 CONFIG_RTE_LIBRTE_PMD_RING=y
176 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
177 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
180 # Compile software PMD backed by PCAP files
182 CONFIG_RTE_LIBRTE_PMD_PCAP=y
185 # Do prefetch of packet data within PMD driver receive function
187 CONFIG_RTE_PMD_PACKET_PREFETCH=y
190 # Compile librte_ring
192 CONFIG_RTE_LIBRTE_RING=y
193 CONFIG_RTE_LIBRTE_RING_DEBUG=n
194 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
197 # Compile librte_mempool
199 CONFIG_RTE_LIBRTE_MEMPOOL=y
200 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
201 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
204 # Compile librte_mbuf
206 CONFIG_RTE_LIBRTE_MBUF=y
207 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
208 CONFIG_RTE_MBUF_SCATTER_GATHER=y
209 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
210 CONFIG_RTE_PKTMBUF_HEADROOM=128
213 # Compile librte_timer
215 CONFIG_RTE_LIBRTE_TIMER=y
216 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
219 # Compile librte_malloc
221 CONFIG_RTE_LIBRTE_MALLOC=y
222 CONFIG_RTE_LIBRTE_MALLOC_DEBUG=n
223 CONFIG_RTE_MALLOC_MEMZONE_SIZE=11M
226 # Compile librte_cmdline
228 CONFIG_RTE_LIBRTE_CMDLINE=y
229 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
232 # Compile librte_hash
234 CONFIG_RTE_LIBRTE_HASH=y
235 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
240 CONFIG_RTE_LIBRTE_LPM=y
241 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
244 # Compile librte_power
246 CONFIG_RTE_LIBRTE_POWER=n
247 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
248 CONFIG_RTE_MAX_LCORE_FREQS=64
253 CONFIG_RTE_LIBRTE_NET=y
256 # Compile librte_meter
258 CONFIG_RTE_LIBRTE_METER=y
261 # Compile librte_sched
263 CONFIG_RTE_LIBRTE_SCHED=y
264 CONFIG_RTE_SCHED_RED=n
265 CONFIG_RTE_SCHED_COLLECT_STATS=n
266 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
267 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
270 # Compile the test application
273 CONFIG_RTE_LIBRTE_KNI=n
274 CONFIG_RTE_LIBRTE_KNI_DEBUG=n
275 CONFIG_RTE_KNI_KO_DEBUG=n
276 CONFIG_RTE_KNI_VHOST=n
277 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
278 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
279 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
280 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
283 # Enable warning directives
285 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
288 # Compile the test application
290 CONFIG_RTE_APP_TEST=y
293 # Compile the PMD test application
295 CONFIG_RTE_TEST_PMD=y
296 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
297 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n