2 # SPDX-License-Identifier: BSD-3-Clause
3 # Copyright 2015 6WIND S.A.
8 # - ARMV8_CRYPTO_LIB_PATH
9 # - DPDK_BUILD_TEST_CONFIGS (defconfig1+option1+option2 defconfig2)
11 # - DPDK_DEP_BPF (y/[n])
13 # - DPDK_DEP_ELF (y/[n])
14 # - DPDK_DEP_ISAL (y/[n])
15 # - DPDK_DEP_JSON (y/[n])
17 # - DPDK_DEP_MLX (y/[n])
18 # - DPDK_DEP_NFB (y/[n])
19 # - DPDK_DEP_NUMA ([y]/n)
20 # - DPDK_DEP_PCAP (y/[n])
21 # - DPDK_DEP_SSL (y/[n])
22 # - DPDK_DEP_IPSEC_MB (y/[n])
23 # - DPDK_DEP_SZE (y/[n])
24 # - DPDK_DEP_ZLIB (y/[n])
25 # - DPDK_MAKE_JOBS (int)
26 # - DPDK_NOTIFY (notify-send)
29 # - LIBSSO_SNOW3G_PATH
30 # - LIBSSO_KASUMI_PATH
32 . $(dirname $(readlink -f $0))/load-devel-config
35 echo "usage: $(basename $0) [-h] [-jX] [-s] [config1 [config2] ...]]"
39 echo 'Test building several targets with different options'
46 -jX use X parallel jobs in "make"
47 -s short test only first config without tests|examples|doc
50 config: defconfig[[~][+]option1[[~][+]option2...]]
51 Example: x86_64-native-linux-gcc+debug~RXTX_CALLBACKS
52 The lowercase options are defined inside $(basename $0).
53 The uppercase options can be the end of a defconfig option
54 to enable if prefixed with '+' or to disable if prefixed with '~'.
55 Default is to automatically enable most of the options.
56 The external dependencies are setup with DPDK_DEP_* variables.
57 If no config on command line, DPDK_BUILD_TEST_CONFIGS is used.
61 [ -z $MAKE ] && command -v gmake > /dev/null && MAKE=gmake
62 [ -z $MAKE ] && command -v make > /dev/null && MAKE=make
63 [ -z $MAKE ] && echo "Cannot find make or gmake" && exit 1
69 while getopts hj:sv ARG ; do
74 h ) print_help ; exit 0 ;;
75 ? ) print_usage ; exit 1 ;;
78 shift $(($OPTIND - 1))
79 configs=${*:-$DPDK_BUILD_TEST_CONFIGS}
85 [ "$DPDK_NOTIFY" != notify-send ] || \
86 notify-send -u low --icon=dialog-information 'DPDK build' 'finished'
87 elif [ -z "$signal" ] ; then
88 [ -z "$dir" ] || echo "failed to build $dir" >&2
89 [ "$DPDK_NOTIFY" != notify-send ] || \
90 notify-send -u low --icon=dialog-error 'DPDK build' 'failed'
93 # catch manual interrupt to ignore notification
94 trap "signal=INT ; trap - INT ; kill -INT $$" INT
95 # notify result on exit
98 cd $(dirname $(readlink -f $0))/..
102 export PATH=$default_path
104 unset DPDK_DEP_ARCHIVE
106 unset DPDK_DEP_CFLAGS
110 unset DPDK_DEP_LDFLAGS
116 unset DPDK_DEP_IPSEC_MB
119 unset ARMV8_CRYPTO_LIB_PATH
122 unset LIBSSO_SNOW3G_PATH
123 unset LIBSSO_KASUMI_PATH
124 unset LIBSSO_ZUC_PATH
125 unset PQOS_INSTALL_PATH
128 config () # <directory> <target> <options>
131 if git rev-parse 2>&- && [ -n "$(git diff HEAD~ -- config)" ] ; then
132 echo 'Default config may have changed'
135 if [ ! -e $1/.config ] || $reconfig ; then
136 echo "================== Configure $1"
137 ${MAKE} T=$2 O=$1 config
139 echo 'Customize configuration'
140 # Built-in options (lowercase)
141 ! echo $3 | grep -q '+default' || \
142 sed -ri="" 's,(RTE_MACHINE=")native,\1default,' $1/.config
143 echo $3 | grep -q '+next' || \
144 sed -ri="" 's,(NEXT_ABI=)y,\1n,' $1/.config
145 ! echo $3 | grep -q '+shared' || \
146 sed -ri="" 's,(SHARED_LIB=)n,\1y,' $1/.config
147 ! echo $3 | grep -q '+debug' || ( \
148 sed -ri="" 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
149 sed -ri="" 's,(_DEBUG.*=)n,\1y,' $1/.config
150 sed -ri="" 's,(_STAT.*=)n,\1y,' $1/.config
151 sed -ri="" 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
153 # Automatic configuration
154 test "$DPDK_DEP_NUMA" != n || \
155 sed -ri="" 's,(NUMA.*=)y,\1n,' $1/.config
156 sed -ri="" 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
157 sed -ri="" 's,(BYPASS=)n,\1y,' $1/.config
158 test "$DPDK_DEP_ARCHIVE" != y || \
159 sed -ri="" 's,(RESOURCE_TAR=)n,\1y,' $1/.config
160 test "$DPDK_DEP_BPF" != y || \
161 sed -ri="" 's,(PMD_AF_XDP=)n,\1y,' $1/.config
162 test "$DPDK_DEP_ISAL" != y || \
163 sed -ri="" 's,(PMD_ISAL=)n,\1y,' $1/.config
164 test "$DPDK_DEP_MLX" != y || \
165 sed -ri="" 's,(MLX._PMD=)n,\1y,' $1/.config
166 test "$DPDK_DEP_NFB" != y || \
167 sed -ri="" 's,(NFB_PMD=)n,\1y,' $1/.config
168 test "$DPDK_DEP_SZE" != y || \
169 sed -ri="" 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
170 test "$DPDK_DEP_ZLIB" != y || \
171 sed -ri="" 's,(BNX2X_PMD=)n,\1y,' $1/.config
172 test "$DPDK_DEP_ZLIB" != y || \
173 sed -ri="" 's,(PMD_ZLIB=)n,\1y,' $1/.config
174 test "$DPDK_DEP_ZLIB" != y || \
175 sed -ri="" 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
176 test "$DPDK_DEP_PCAP" != y || \
177 sed -ri="" 's,(PCAP=)n,\1y,' $1/.config
178 test -z "$ARMV8_CRYPTO_LIB_PATH" || \
179 sed -ri="" 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
180 test "$DPDK_DEP_IPSEC_MB" != y || \
181 sed -ri="" 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
182 test "$DPDK_DEP_IPSEC_MB" != y || \
183 sed -ri="" 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
184 test -z "$LIBSSO_SNOW3G_PATH" || \
185 sed -ri="" 's,(PMD_SNOW3G=)n,\1y,' $1/.config
186 test -z "$LIBSSO_KASUMI_PATH" || \
187 sed -ri="" 's,(PMD_KASUMI=)n,\1y,' $1/.config
188 test -z "$LIBSSO_ZUC_PATH" || \
189 sed -ri="" 's,(PMD_ZUC=)n,\1y,' $1/.config
190 test "$DPDK_DEP_SSL" != y || \
191 sed -ri="" 's,(PMD_CCP=)n,\1y,' $1/.config
192 test "$DPDK_DEP_SSL" != y || \
193 sed -ri="" 's,(PMD_OPENSSL=)n,\1y,' $1/.config
194 test "$DPDK_DEP_SSL" != y || \
195 sed -ri="" 's,(QAT_SYM=)n,\1y,' $1/.config
196 test -z "$FLEXRAN_SDK" || \
197 sed -ri="" 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
198 sed -ri="" 's,(SCHED_.*=)n,\1y,' $1/.config
199 test -z "$LIBMUSDK_PATH" || \
200 sed -ri="" 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
201 test -z "$LIBMUSDK_PATH" || \
202 sed -ri="" 's,(MVPP2_PMD=)n,\1y,' $1/.config
203 test -z "$LIBMUSDK_PATH" || \
204 sed -ri="" 's,(MVNETA_PMD=)n,\1y,' $1/.config
205 test "$DPDK_DEP_ELF" != y || \
206 sed -ri="" 's,(BPF_ELF=)n,\1y,' $1/.config
207 test "$DPDK_DEP_JSON" != y || \
208 sed -ri="" 's,(TELEMETRY=)n,\1y,' $1/.config
209 build_config_hook $1 $2 $3
211 # Explicit enabler/disabler (uppercase)
212 for option in $(echo $3 | sed 's,[~+], &,g') ; do
213 pattern=$(echo $option | cut -c2-)
214 if echo $option | grep -q '^~' ; then
215 sed -ri="" "s,($pattern=)y,\1n," $1/.config
216 elif echo $option | grep -q '^+' ; then
217 sed -ri="" "s,($pattern=)n,\1y," $1/.config
223 # default empty hook to override in devel config
224 build_config_hook () # <directory> <target> <options>
229 for conf in $configs ; do
230 target=$(echo $conf | sed 's,[~+].*,,')
231 # reload config with DPDK_TARGET set
234 . $(dirname $(readlink -f $0))/load-devel-config
236 options=$(echo $conf | sed 's,[^~+]*,,')
238 config $dir $target $options
240 echo "================== Build $dir"
241 ${MAKE} -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
242 EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
244 echo "================== Build examples for $dir"
245 export RTE_SDK=$(pwd)
246 export RTE_TARGET=$dir
247 ${MAKE} -j$J -sC examples \
248 EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
249 O=$(readlink -f $dir)/examples
251 echo "################## $dir done."
257 echo "================== Build doxygen HTML API"
258 ${MAKE} doc-api-html >/dev/null 2>.check/doc.txt
259 echo "================== Build sphinx HTML guides"
260 ${MAKE} doc-guides-html >/dev/null 2>>.check/doc.txt
261 echo "================== Check docs"
262 diff -u /dev/null .check/doc.txt