1 .. SPDX-License-Identifier: BSD-3-Clause
2 Copyright(c) 2017 Intel Corporation.
7 This section explains the supported features that are listed in the
10 As a guide to implementers it also shows the structs where the features are
11 defined and the APIs that can be use to get/set the values.
13 Following tags used for feature details, these are from driver point of view:
15 ``[uses]`` : Driver uses some kind of input from the application.
17 ``[implements]`` : Driver implements a functionality.
19 ``[provides]`` : Driver provides some kind of data to the application. It is possible
20 to provide data by implementing some function, but "provides" is used
21 for cases where provided data can't be represented simply by a function.
23 ``[related]`` : Related API with that feature.
26 .. _nic_features_speed_capabilities:
31 Supports getting the speed capabilities that the current device is capable of.
33 * **[provides] rte_eth_dev_info**: ``speed_capa:ETH_LINK_SPEED_*``.
34 * **[related] API**: ``rte_eth_dev_info_get()``.
37 .. _nic_features_link_status:
42 Supports getting the link speed, duplex mode and link state (up/down).
44 * **[implements] eth_dev_ops**: ``link_update``.
45 * **[implements] rte_eth_dev_data**: ``dev_link``.
46 * **[related] API**: ``rte_eth_link_get()``, ``rte_eth_link_get_nowait()``.
49 .. _nic_features_link_status_event:
54 Supports Link Status Change interrupts.
56 * **[uses] user config**: ``dev_conf.intr_conf.lsc``.
57 * **[uses] rte_eth_dev_data**: ``dev_flags:RTE_ETH_DEV_INTR_LSC``.
58 * **[uses] rte_eth_event_type**: ``RTE_ETH_EVENT_INTR_LSC``.
59 * **[implements] rte_eth_dev_data**: ``dev_link``.
60 * **[provides] rte_pci_driver.drv_flags**: ``RTE_PCI_DRV_INTR_LSC``.
61 * **[related] API**: ``rte_eth_link_get()``, ``rte_eth_link_get_nowait()``.
64 .. _nic_features_removal_event:
69 Supports device removal interrupts.
71 * **[uses] user config**: ``dev_conf.intr_conf.rmv``.
72 * **[uses] rte_eth_dev_data**: ``dev_flags:RTE_ETH_DEV_INTR_RMV``.
73 * **[uses] rte_eth_event_type**: ``RTE_ETH_EVENT_INTR_RMV``.
74 * **[provides] rte_pci_driver.drv_flags**: ``RTE_PCI_DRV_INTR_RMV``.
77 .. _nic_features_queue_status_event:
82 Supports queue enable/disable events.
84 * **[uses] rte_eth_event_type**: ``RTE_ETH_EVENT_QUEUE_STATE``.
87 .. _nic_features_rx_interrupt:
92 Supports Rx interrupts.
94 * **[uses] user config**: ``dev_conf.intr_conf.rxq``.
95 * **[implements] eth_dev_ops**: ``rx_queue_intr_enable``, ``rx_queue_intr_disable``.
96 * **[related] API**: ``rte_eth_dev_rx_intr_enable()``, ``rte_eth_dev_rx_intr_disable()``.
99 .. _nic_features_lock-free_tx_queue:
104 If a PMD advertises DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can
105 invoke rte_eth_tx_burst() concurrently on the same Tx queue without SW lock.
107 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MT_LOCKFREE``.
108 * **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MT_LOCKFREE``.
109 * **[related] API**: ``rte_eth_tx_burst()``.
112 .. _nic_features_fast_mbuf_free:
117 Supports optimization for fast release of mbufs following successful Tx.
118 Requires that per queue, all mbufs come from the same mempool and has refcnt = 1.
120 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
121 * **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MBUF_FAST_FREE``.
124 .. _nic_features_free_tx_mbuf_on_demand:
126 Free Tx mbuf on demand
127 ----------------------
129 Supports freeing consumed buffers on a Tx ring.
131 * **[implements] eth_dev_ops**: ``tx_done_cleanup``.
132 * **[related] API**: ``rte_eth_tx_done_cleanup()``.
135 .. _nic_features_queue_start_stop:
140 Supports starting/stopping a specific Rx/Tx queue of a port.
142 * **[implements] eth_dev_ops**: ``rx_queue_start``, ``rx_queue_stop``, ``tx_queue_start``,
144 * **[related] API**: ``rte_eth_dev_rx_queue_start()``, ``rte_eth_dev_rx_queue_stop()``,
145 ``rte_eth_dev_tx_queue_start()``, ``rte_eth_dev_tx_queue_stop()``.
148 .. _nic_features_mtu_update:
153 Supports updating port MTU.
155 * **[implements] eth_dev_ops**: ``mtu_set``.
156 * **[implements] rte_eth_dev_data**: ``mtu``.
157 * **[provides] rte_eth_dev_info**: ``max_rx_pktlen``.
158 * **[related] API**: ``rte_eth_dev_set_mtu()``, ``rte_eth_dev_get_mtu()``.
161 .. _nic_features_jumbo_frame:
166 Supports Rx jumbo frames.
168 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_JUMBO_FRAME``.
169 ``dev_conf.rxmode.max_rx_pkt_len``.
170 * **[related] rte_eth_dev_info**: ``max_rx_pktlen``.
171 * **[related] API**: ``rte_eth_dev_set_mtu()``.
174 .. _nic_features_scattered_rx:
179 Supports receiving segmented mbufs.
181 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SCATTER``.
182 * **[implements] datapath**: ``Scattered Rx function``.
183 * **[implements] rte_eth_dev_data**: ``scattered_rx``.
184 * **[provides] eth_dev_ops**: ``rxq_info_get:scattered_rx``.
185 * **[related] eth_dev_ops**: ``rx_pkt_burst``.
188 .. _nic_features_buffer_split:
193 Scatters the packets being received on specified boundaries to segmented mbufs.
195 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT``.
196 * **[uses] rte_eth_rxconf**: ``rx_conf.rx_seg, rx_conf.rx_nseg``.
197 * **[implements] datapath**: ``Buffer Split functionality``.
198 * **[provides] rte_eth_dev_info**: ``rx_offload_capa:RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT``.
199 * **[related] API**: ``rte_eth_rx_queue_setup()``.
202 .. _nic_features_lro:
207 Supports Large Receive Offload.
209 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TCP_LRO``.
210 ``dev_conf.rxmode.max_lro_pkt_size``.
211 * **[implements] datapath**: ``LRO functionality``.
212 * **[implements] rte_eth_dev_data**: ``lro``.
213 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_LRO``, ``mbuf.tso_segsz``.
214 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_TCP_LRO``.
215 * **[provides] rte_eth_dev_info**: ``max_lro_pkt_size``.
218 .. _nic_features_tso:
223 Supports TCP Segmentation Offloading.
225 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_TCP_TSO``.
226 * **[uses] rte_eth_desc_lim**: ``nb_seg_max``, ``nb_mtu_seg_max``.
227 * **[uses] mbuf**: ``mbuf.ol_flags:`` ``PKT_TX_TCP_SEG``, ``PKT_TX_IPV4``, ``PKT_TX_IPV6``, ``PKT_TX_IP_CKSUM``.
228 * **[uses] mbuf**: ``mbuf.tso_segsz``, ``mbuf.l2_len``, ``mbuf.l3_len``, ``mbuf.l4_len``.
229 * **[implements] datapath**: ``TSO functionality``.
230 * **[provides] rte_eth_dev_info**: ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_TCP_TSO,DEV_TX_OFFLOAD_UDP_TSO``.
233 .. _nic_features_promiscuous_mode:
238 Supports enabling/disabling promiscuous mode for a port.
240 * **[implements] eth_dev_ops**: ``promiscuous_enable``, ``promiscuous_disable``.
241 * **[implements] rte_eth_dev_data**: ``promiscuous``.
242 * **[related] API**: ``rte_eth_promiscuous_enable()``, ``rte_eth_promiscuous_disable()``,
243 ``rte_eth_promiscuous_get()``.
246 .. _nic_features_allmulticast_mode:
251 Supports enabling/disabling receiving multicast frames.
253 * **[implements] eth_dev_ops**: ``allmulticast_enable``, ``allmulticast_disable``.
254 * **[implements] rte_eth_dev_data**: ``all_multicast``.
255 * **[related] API**: ``rte_eth_allmulticast_enable()``,
256 ``rte_eth_allmulticast_disable()``, ``rte_eth_allmulticast_get()``.
259 .. _nic_features_unicast_mac_filter:
264 Supports adding MAC addresses to enable incoming filtering of packets.
266 * **[implements] eth_dev_ops**: ``mac_addr_set``, ``mac_addr_add``, ``mac_addr_remove``.
267 * **[implements] rte_eth_dev_data**: ``mac_addrs``.
268 * **[related] API**: ``rte_eth_dev_default_mac_addr_set()``,
269 ``rte_eth_dev_mac_addr_add()``, ``rte_eth_dev_mac_addr_remove()``,
270 ``rte_eth_macaddr_get()``.
273 .. _nic_features_multicast_mac_filter:
278 Supports setting multicast addresses to filter.
280 * **[implements] eth_dev_ops**: ``set_mc_addr_list``.
281 * **[related] API**: ``rte_eth_dev_set_mc_addr_list()``.
284 .. _nic_features_rss_hash:
289 Supports RSS hashing on RX.
291 * **[uses] user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_RSS_FLAG``.
292 * **[uses] user config**: ``dev_conf.rx_adv_conf.rss_conf``.
293 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_RSS_HASH``.
294 * **[provides] rte_eth_dev_info**: ``flow_type_rss_offloads``.
295 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_RSS_HASH``, ``mbuf.rss``.
298 .. _nic_features_inner_rss:
303 Supports RX RSS hashing on Inner headers.
305 * **[uses] rte_flow_action_rss**: ``level``.
306 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_RSS_HASH``.
307 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_RSS_HASH``, ``mbuf.rss``.
310 .. _nic_features_rss_key_update:
315 Supports configuration of Receive Side Scaling (RSS) hash computation. Updating
316 Receive Side Scaling (RSS) hash key.
318 * **[implements] eth_dev_ops**: ``rss_hash_update``, ``rss_hash_conf_get``.
319 * **[provides] rte_eth_dev_info**: ``hash_key_size``.
320 * **[related] API**: ``rte_eth_dev_rss_hash_update()``,
321 ``rte_eth_dev_rss_hash_conf_get()``.
324 .. _nic_features_rss_reta_update:
329 Supports updating Redirection Table of the Receive Side Scaling (RSS).
331 * **[implements] eth_dev_ops**: ``reta_update``, ``reta_query``.
332 * **[provides] rte_eth_dev_info**: ``reta_size``.
333 * **[related] API**: ``rte_eth_dev_rss_reta_update()``, ``rte_eth_dev_rss_reta_query()``.
336 .. _nic_features_vmdq:
341 Supports Virtual Machine Device Queues (VMDq).
343 * **[uses] user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_VMDQ_FLAG``.
344 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_dcb_conf``.
345 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_rx_conf``.
346 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_dcb_tx_conf``.
347 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_tx_conf``.
350 .. _nic_features_sriov:
355 Driver supports creating Virtual Functions.
357 * **[implements] rte_eth_dev_data**: ``sriov``.
359 .. _nic_features_dcb:
364 Supports Data Center Bridging (DCB).
366 * **[uses] user config**: ``dev_conf.rxmode.mq_mode`` = ``ETH_MQ_RX_DCB_FLAG``.
367 * **[uses] user config**: ``dev_conf.rx_adv_conf.vmdq_dcb_conf``.
368 * **[uses] user config**: ``dev_conf.rx_adv_conf.dcb_rx_conf``.
369 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_dcb_tx_conf``.
370 * **[uses] user config**: ``dev_conf.tx_adv_conf.vmdq_tx_conf``.
371 * **[implements] eth_dev_ops**: ``get_dcb_info``.
372 * **[related] API**: ``rte_eth_dev_get_dcb_info()``.
375 .. _nic_features_vlan_filter:
380 Supports filtering of a VLAN Tag identifier.
382 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_FILTER``.
383 * **[implements] eth_dev_ops**: ``vlan_filter_set``.
384 * **[related] API**: ``rte_eth_dev_vlan_filter()``.
387 .. _nic_features_flow_control:
392 Supports configuring link flow control.
394 * **[implements] eth_dev_ops**: ``flow_ctrl_get``, ``flow_ctrl_set``,
395 ``priority_flow_ctrl_set``.
396 * **[related] API**: ``rte_eth_dev_flow_ctrl_get()``, ``rte_eth_dev_flow_ctrl_set()``,
397 ``rte_eth_dev_priority_flow_ctrl_set()``.
400 .. _nic_features_rate_limitation:
405 Supports Tx rate limitation for a queue.
407 * **[implements] eth_dev_ops**: ``set_queue_rate_limit``.
408 * **[related] API**: ``rte_eth_set_queue_rate_limit()``.
411 .. _nic_features_inline_crypto_doc:
416 Supports inline crypto processing defined by rte_security library to perform crypto
417 operations of security protocol while packet is received in NIC. NIC is not aware
418 of protocol operations. See Security library and PMD documentation for more details.
420 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SECURITY``,
421 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_SECURITY``.
422 * **[uses] mbuf**: ``mbuf.l2_len``.
423 * **[implements] rte_security_ops**: ``session_create``, ``session_update``,
424 ``session_stats_get``, ``session_destroy``, ``set_pkt_metadata``, ``capabilities_get``.
425 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_SECURITY``,
426 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_SECURITY``.
427 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD``,
428 ``mbuf.ol_flags:PKT_TX_SEC_OFFLOAD``, ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD_FAILED``.
429 * **[provides] rte_security_ops, capabilities_get**: ``action: RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO``
432 .. _nic_features_inline_protocol_doc:
437 Supports inline protocol processing defined by rte_security library to perform
438 protocol processing for the security protocol (e.g. IPsec, MACSEC) while the
439 packet is received at NIC. The NIC is capable of understanding the security
440 protocol operations. See security library and PMD documentation for more details.
442 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_SECURITY``,
443 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_SECURITY``.
444 * **[uses] mbuf**: ``mbuf.l2_len``.
445 * **[implements] rte_security_ops**: ``session_create``, ``session_update``,
446 ``session_stats_get``, ``session_destroy``, ``set_pkt_metadata``, ``get_userdata``,
447 ``capabilities_get``.
448 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_SECURITY``,
449 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_SECURITY``.
450 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD``,
451 ``mbuf.ol_flags:PKT_TX_SEC_OFFLOAD``, ``mbuf.ol_flags:PKT_RX_SEC_OFFLOAD_FAILED``.
452 * **[provides] rte_security_ops, capabilities_get**: ``action: RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL``
455 .. _nic_features_crc_offload:
460 Supports CRC stripping by hardware.
461 A PMD assumed to support CRC stripping by default. PMD should advertise if it supports keeping CRC.
463 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_KEEP_CRC``.
466 .. _nic_features_vlan_offload:
471 Supports VLAN offload to hardware.
473 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_STRIP,DEV_RX_OFFLOAD_VLAN_FILTER,DEV_RX_OFFLOAD_VLAN_EXTEND``.
474 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_VLAN_INSERT``.
475 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_VLAN``, ``mbuf.vlan_tci``.
476 * **[implements] eth_dev_ops**: ``vlan_offload_set``.
477 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN`` ``mbuf.vlan_tci``.
478 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_VLAN_STRIP``,
479 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_VLAN_INSERT``.
480 * **[related] API**: ``rte_eth_dev_set_vlan_offload()``,
481 ``rte_eth_dev_get_vlan_offload()``.
484 .. _nic_features_qinq_offload:
489 Supports QinQ (queue in queue) offload.
491 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_QINQ_STRIP``.
492 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_QINQ_INSERT``.
493 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_QINQ``, ``mbuf.vlan_tci_outer``.
494 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_QINQ_STRIPPED``, ``mbuf.ol_flags:PKT_RX_QINQ``,
495 ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN``
496 ``mbuf.vlan_tci``, ``mbuf.vlan_tci_outer``.
497 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_QINQ_STRIP``,
498 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_QINQ_INSERT``.
501 .. _nic_features_fec:
506 Supports Forward error correction. Forward error correction (FEC) is a bit error correction mode.
507 It adds error correction information to data packets at the transmit end, and uses the error correction
508 information to correct the bit errors generated during data packet transmission at the receive end. This
509 improves signal quality but also brings a delay to signals. This function can be enabled or disabled as required.
511 * **[implements] eth_dev_ops**: ``fec_get_capability``, ``fec_get``, ``fec_set``.
512 * **[provides] rte_eth_fec_capa**: ``speed:ETH_SPEED_NUM_*``, ``capa:RTE_ETH_FEC_MODE_TO_CAPA()``.
513 * **[related] API**: ``rte_eth_fec_get_capability()``, ``rte_eth_fec_get()``, ``rte_eth_fec_set()``.
516 .. _nic_features_l3_checksum_offload:
521 Supports L3 checksum offload.
523 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_IPV4_CKSUM``.
524 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_IPV4_CKSUM``.
525 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
526 ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``.
527 * **[uses] mbuf**: ``mbuf.l2_len``, ``mbuf.l3_len``.
528 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_IP_CKSUM_UNKNOWN`` |
529 ``PKT_RX_IP_CKSUM_BAD`` | ``PKT_RX_IP_CKSUM_GOOD`` |
530 ``PKT_RX_IP_CKSUM_NONE``.
531 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_IPV4_CKSUM``,
532 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_IPV4_CKSUM``.
535 .. _nic_features_l4_checksum_offload:
540 Supports L4 checksum offload.
542 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM,DEV_RX_OFFLOAD_SCTP_CKSUM``.
543 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
544 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
545 ``mbuf.ol_flags:PKT_TX_L4_NO_CKSUM`` | ``PKT_TX_TCP_CKSUM`` |
546 ``PKT_TX_SCTP_CKSUM`` | ``PKT_TX_UDP_CKSUM``.
547 * **[uses] mbuf**: ``mbuf.l2_len``, ``mbuf.l3_len``.
548 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_L4_CKSUM_UNKNOWN`` |
549 ``PKT_RX_L4_CKSUM_BAD`` | ``PKT_RX_L4_CKSUM_GOOD`` |
550 ``PKT_RX_L4_CKSUM_NONE``.
551 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_UDP_CKSUM,DEV_RX_OFFLOAD_TCP_CKSUM,DEV_RX_OFFLOAD_SCTP_CKSUM``,
552 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_UDP_CKSUM,DEV_TX_OFFLOAD_TCP_CKSUM,DEV_TX_OFFLOAD_SCTP_CKSUM``.
554 .. _nic_features_hw_timestamp:
561 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_TIMESTAMP``.
562 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_TIMESTAMP``.
563 * **[provides] mbuf**: ``mbuf.timestamp``.
564 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa: DEV_RX_OFFLOAD_TIMESTAMP``.
565 * **[related] eth_dev_ops**: ``read_clock``.
567 .. _nic_features_macsec_offload:
574 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_MACSEC_STRIP``.
575 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_MACSEC_INSERT``.
576 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_MACSEC``.
577 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_MACSEC_STRIP``,
578 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_MACSEC_INSERT``.
581 .. _nic_features_inner_l3_checksum:
586 Supports inner packet L3 checksum.
588 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``.
589 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
590 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_IP_CKSUM``,
591 ``mbuf.ol_flags:PKT_TX_IPV4`` | ``PKT_TX_IPV6``,
592 ``mbuf.ol_flags:PKT_TX_OUTER_IP_CKSUM``,
593 ``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
594 * **[uses] mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
595 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_OUTER_IP_CKSUM_BAD``.
596 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM``,
597 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM``.
600 .. _nic_features_inner_l4_checksum:
605 Supports inner packet L4 checksum.
607 * **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_OUTER_UDP_CKSUM``.
608 * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_OUTER_L4_CKSUM_UNKNOWN`` |
609 ``PKT_RX_OUTER_L4_CKSUM_BAD`` | ``PKT_RX_OUTER_L4_CKSUM_GOOD`` | ``PKT_RX_OUTER_L4_CKSUM_INVALID``.
610 * **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
611 * **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_OUTER_IPV4`` | ``PKT_TX_OUTER_IPV6``.
612 ``mbuf.ol_flags:PKT_TX_OUTER_UDP_CKSUM``.
613 * **[uses] mbuf**: ``mbuf.outer_l2_len``, ``mbuf.outer_l3_len``.
614 * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_OUTER_UDP_CKSUM``,
615 ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
618 .. _nic_features_packet_type_parsing:
623 Supports packet type parsing and returns a list of supported types.
624 Allows application to set ptypes it is interested in.
626 * **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``,
627 * **[related] API**: ``rte_eth_dev_get_supported_ptypes()``,
628 ``rte_eth_dev_set_ptypes()``, ``dev_ptypes_set``.
629 * **[provides] mbuf**: ``mbuf.packet_type``.
632 .. _nic_features_timesync:
637 Supports IEEE1588/802.1AS timestamping.
639 * **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
640 ``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
641 ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
642 * **[related] API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
643 ``rte_eth_timesync_read_rx_timestamp()``,
644 ``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
645 ``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
648 .. _nic_features_rx_descriptor_status:
653 Supports check the status of a Rx descriptor. When ``rx_descriptor_status`` is
654 used, status can be "Available", "Done" or "Unavailable".
656 * **[implements] rte_eth_dev**: ``rx_descriptor_status``.
657 * **[related] API**: ``rte_eth_rx_descriptor_status()``.
660 .. _nic_features_tx_descriptor_status:
665 Supports checking the status of a Tx descriptor. Status can be "Full", "Done"
668 * **[implements] rte_eth_dev**: ``tx_descriptor_status``.
669 * **[related] API**: ``rte_eth_tx_descriptor_status()``.
672 .. _nic_features_basic_stats:
677 Support basic statistics such as: ipackets, opackets, ibytes, obytes,
678 imissed, ierrors, oerrors, rx_nombuf.
680 And per queue stats: q_ipackets, q_opackets, q_ibytes, q_obytes, q_errors.
682 These apply to all drivers.
684 * **[implements] eth_dev_ops**: ``stats_get``, ``stats_reset``.
685 * **[related] API**: ``rte_eth_stats_get``, ``rte_eth_stats_reset()``.
688 .. _nic_features_extended_stats:
693 Supports Extended Statistics, changes from driver to driver.
695 * **[implements] eth_dev_ops**: ``xstats_get``, ``xstats_reset``, ``xstats_get_names``.
696 * **[implements] eth_dev_ops**: ``xstats_get_by_id``, ``xstats_get_names_by_id``.
697 * **[related] API**: ``rte_eth_xstats_get()``, ``rte_eth_xstats_reset()``,
698 ``rte_eth_xstats_get_names``, ``rte_eth_xstats_get_by_id()``,
699 ``rte_eth_xstats_get_names_by_id()``, ``rte_eth_xstats_get_id_by_name()``.
702 .. _nic_features_stats_per_queue:
707 Supports configuring per-queue stat counter mapping.
709 * **[implements] eth_dev_ops**: ``queue_stats_mapping_set``.
710 * **[related] API**: ``rte_eth_dev_set_rx_queue_stats_mapping()``,
711 ``rte_eth_dev_set_tx_queue_stats_mapping()``.
714 .. _nic_features_fw_version:
719 Supports getting device hardware firmware information.
721 * **[implements] eth_dev_ops**: ``fw_version_get``.
722 * **[related] API**: ``rte_eth_dev_fw_version_get()``.
725 .. _nic_features_eeprom_dump:
730 Supports getting/setting device eeprom data.
732 * **[implements] eth_dev_ops**: ``get_eeprom_length``, ``get_eeprom``, ``set_eeprom``.
733 * **[related] API**: ``rte_eth_dev_get_eeprom_length()``, ``rte_eth_dev_get_eeprom()``,
734 ``rte_eth_dev_set_eeprom()``.
737 .. _nic_features_module_eeprom_dump:
742 Supports getting information and data of plugin module eeprom.
744 * **[implements] eth_dev_ops**: ``get_module_info``, ``get_module_eeprom``.
745 * **[related] API**: ``rte_eth_dev_get_module_info()``, ``rte_eth_dev_get_module_eeprom()``.
748 .. _nic_features_register_dump:
753 Supports retrieving device registers and registering attributes (number of
754 registers and register size).
756 * **[implements] eth_dev_ops**: ``get_reg``.
757 * **[related] API**: ``rte_eth_dev_get_reg_info()``.
760 .. _nic_features_led:
765 Supports turning on/off a software controllable LED on a device.
767 * **[implements] eth_dev_ops**: ``dev_led_on``, ``dev_led_off``.
768 * **[related] API**: ``rte_eth_led_on()``, ``rte_eth_led_off()``.
771 .. _nic_features_multiprocess_aware:
776 Driver can be used for primary-secondary process model.
779 .. _nic_features_freebsd:
784 Supports running on FreeBSD.
787 .. _nic_features_linux:
792 Supports running on Linux.
795 .. _nic_features_windows:
800 Supports running on Windows.
803 .. _nic_features_armv7:
808 Support armv7 architecture.
811 .. _nic_features_armv8:
816 Support armv8a (64bit) architecture.
819 .. _nic_features_power8:
824 Support PowerPC architecture.
827 .. _nic_features_x86-32:
832 Support 32bits x86 architecture.
835 .. _nic_features_x86-64:
840 Support 64bits x86 architecture.
843 .. _nic_features_usage_doc:
848 Documentation describes usage.
850 See ``doc/guides/nics/*.rst``
853 .. _nic_features_design_doc:
858 Documentation describes design.
860 See ``doc/guides/nics/*.rst``.
863 .. _nic_features_perf_doc:
868 Documentation describes performance values.
870 See ``dpdk.org/doc/perf/*``.
872 .. _nic_features_runtime_rx_queue_setup:
874 Runtime Rx queue setup
875 ----------------------
877 Supports Rx queue setup after device started.
879 * **[provides] rte_eth_dev_info**: ``dev_capa:RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP``.
880 * **[related] API**: ``rte_eth_dev_info_get()``.
882 .. _nic_features_runtime_tx_queue_setup:
884 Runtime Tx queue setup
885 ----------------------
887 Supports Tx queue setup after device started.
889 * **[provides] rte_eth_dev_info**: ``dev_capa:RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP``.
890 * **[related] API**: ``rte_eth_dev_info_get()``.
892 .. _nic_features_burst_mode_info:
897 Supports to get Rx/Tx packet burst mode information.
899 * **[implements] eth_dev_ops**: ``rx_burst_mode_get``, ``tx_burst_mode_get``.
900 * **[related] API**: ``rte_eth_rx_burst_mode_get()``, ``rte_eth_tx_burst_mode_get()``.
902 .. _nic_features_get_monitor_addr:
904 PMD power management using monitor addresses
905 --------------------------------------------
907 Supports getting a monitoring condition to use together with Ethernet PMD power
908 management (see :doc:`../prog_guide/power_man` for more details).
910 * **[implements] eth_dev_ops**: ``get_monitor_addr``
912 .. _nic_features_other:
914 Other dev ops not represented by a Feature
915 ------------------------------------------
920 * ``vlan_strip_queue_set``
923 * ``uc_hash_table_set``
924 * ``uc_all_hash_table_set``
925 * ``udp_tunnel_port_add``
926 * ``udp_tunnel_port_del``