1 .. SPDX-License-Identifier: BSD-3-Clause
2 Copyright(c) 2019-2020 Xilinx, Inc.
3 Copyright(c) 2016-2019 Solarflare Communications Inc.
5 This software was jointly developed between OKTET Labs (under contract
6 for Solarflare) and Solarflare Communications, Inc.
8 Solarflare libefx-based Poll Mode Driver
9 ========================================
11 The SFC EFX PMD (**librte_net_sfc_efx**) provides poll mode driver support
12 for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters,
13 **Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters and
14 **Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters.
15 SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
17 More information can be found at `Solarflare Communications website
18 <http://solarflare.com>`_.
24 SFC EFX PMD has support for:
26 - Multiple transmit and receive queues
28 - Link state information including link status change interrupt
30 - IPv4/IPv6 TCP/UDP transmit checksum offload
32 - Inner IPv4/IPv6 TCP/UDP transmit checksum offload
34 - Port hardware statistics
36 - Extended statistics (see Solarflare Server Adapter User's Guide for
37 the statistics description)
43 - Jumbo frames up to 9K
49 - TCP segmentation offload (TSO) including VXLAN and GENEVE encapsulated
51 - Multicast MAC filter
53 - IPv4/IPv6 TCP/UDP receive checksum offload
55 - Inner IPv4/IPv6 TCP/UDP receive checksum offload
57 - Received packet type information
59 - Receive side scaling (RSS)
63 - Scattered Rx DMA for packet that are larger that a single Rx descriptor
65 - Receive queue interrupts
67 - Deferred receive and transmit queue start
69 - Transmit VLAN insertion (if running firmware variant supports it)
78 Non-supported Features
79 ----------------------
81 The features not yet supported include:
83 - Priority-based flow control
85 - Configurable RX CRC stripping (always stripped)
87 - Header split on receive
99 Due to requirements on receive buffer alignment and usage of the receive
100 buffer for the auxiliary packet information provided by the NIC up to
101 extra 269 (14 bytes prefix plus up to 255 bytes for end padding) bytes may be
102 required in the receive buffer.
103 It should be taken into account when mbuf pool for receive is created.
106 Equal stride super-buffer mode
107 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
109 When the receive queue uses equal stride super-buffer DMA mode, one HW Rx
110 descriptor carries many Rx buffers which contiguously follow each other
111 with some stride (equal to total size of rte_mbuf as mempool object).
112 Each Rx buffer is an independent rte_mbuf.
113 However dedicated mempool manager must be used when mempool for the Rx
114 queue is created. The manager must support dequeue of the contiguous
115 block of objects and provide mempool info API to get the block size.
117 Another limitation of a equal stride super-buffer mode, imposed by the
118 firmware, is that it allows for a single RSS context.
124 NVGRE, VXLAN and GENEVE tunnels are supported on SFN8xxx and X2xxx family
125 adapters with full-feature firmware variant running.
126 **sfboot** should be used to configure NIC to run full-feature firmware variant.
127 See Solarflare Server Adapter User's Guide for details.
129 SFN8xxx and X2xxx family adapters provide either inner or outer packet classes.
130 If adapter firmware advertises support for tunnels then the PMD
131 configures the hardware to report inner classes, and outer classes are
132 not reported in received packets.
133 However, for VXLAN and GENEVE tunnels the PMD does report UDP as the
134 outer layer 4 packet type.
136 SFN8xxx and X2xxx family adapters report GENEVE packets as VXLAN.
137 If UDP ports are configured for only one tunnel type then it is safe to
138 treat VXLAN packet type indication as the corresponding UDP tunnel type.
144 Supported attributes:
149 Supported pattern items (***non-transfer*** rules):
153 - ETH (exact match of source/destination addresses, individual/group match
154 of destination address, EtherType in the outer frame and exact match of
155 destination addresses, individual/group match of destination address in
158 - VLAN (exact match of VID, double-tagging is supported)
160 - IPV4 (exact match of source/destination addresses,
161 IP transport protocol)
163 - IPV6 (exact match of source/destination addresses,
164 IP transport protocol)
166 - TCP (exact match of source/destination ports)
168 - UDP (exact match of source/destination ports)
170 - VXLAN (exact match of VXLAN network identifier)
172 - GENEVE (exact match of virtual network identifier, only Ethernet (0x6558)
173 protocol type is supported)
175 - NVGRE (exact match of virtual subnet ID)
177 Supported actions (***non-transfer*** rules):
187 - FLAG (supported only with ef10_essb Rx datapath)
189 - MARK (supported only with ef10_essb Rx datapath)
191 Supported pattern items (***transfer*** rules):
193 - PHY_PORT (cannot repeat; conflicts with other traffic source items)
197 Supported actions (***transfer*** rules):
201 Validating flow rules depends on the firmware variant.
203 The :ref:`flow_isolated_mode` is supported.
205 Ethernet destination individual/group match
206 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
208 Ethernet item supports I/G matching, if only the corresponding bit is set
209 in the mask of destination address. If destination address in the spec is
210 multicast, it matches all multicast (and broadcast) packets, otherwise it
211 matches unicast packets that are not filtered by other flow rules.
213 Exceptions to flow rules
214 ~~~~~~~~~~~~~~~~~~~~~~~~
216 There is a list of exceptional flow rule patterns which will not be
217 accepted by the PMD. A pattern will be rejected if at least one of the
220 - Filtering by IPv4 or IPv6 EtherType without pattern items of internet
223 - The last item is IPV4 or IPV6, and it's empty.
225 - Filtering by TCP or UDP IP transport protocol without pattern items of
226 transport layer and above.
228 - The last item is TCP or UDP, and it's empty.
236 - Alveo SN1022 SmartNIC
238 - Solarflare XtremeScale Adapters:
240 - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
242 - Solarflare X2541 Single Port QSFP28 10/25G/100G Adapter
244 - Solarflare X2542 Dual Port QSFP28 10/25G/100G Adapter
246 - Solarflare Flareon [Ultra] Server Adapters:
248 - Solarflare SFN8522 Dual Port SFP+ Server Adapter
250 - Solarflare SFN8522M Dual Port SFP+ Server Adapter
252 - Solarflare SFN8042 Dual Port QSFP+ Server Adapter
254 - Solarflare SFN8542 Dual Port QSFP+ Server Adapter
256 - Solarflare SFN8722 Dual Port SFP+ OCP Server Adapter
258 - Solarflare SFN7002F Dual Port SFP+ Server Adapter
260 - Solarflare SFN7004F Quad Port SFP+ Server Adapter
262 - Solarflare SFN7042Q Dual Port QSFP+ Server Adapter
264 - Solarflare SFN7122F Dual Port SFP+ Server Adapter
266 - Solarflare SFN7124F Quad Port SFP+ Server Adapter
268 - Solarflare SFN7142Q Dual Port QSFP+ Server Adapter
270 - Solarflare SFN7322F Precision Time Synchronization Server Adapter
276 - Requires firmware version:
278 - SFN7xxx: **4.7.1.1001** or higher
280 - SFN8xxx: **6.0.2.1004** or higher
282 Visit `Solarflare Support Downloads <https://support.solarflare.com>`_ to get
283 Solarflare Utilities (either Linux or FreeBSD) with the latest firmware.
284 Follow instructions from Solarflare Server Adapter User's Guide to
285 update firmware and configure the adapter.
288 Pre-Installation Configuration
289 ------------------------------
295 The following build-time options may be enabled on build time using
296 ``-Dc_args=`` meson argument (e.g. ``-Dc_args=-DRTE_LIBRTE_SFC_EFX_DEBUG``).
298 Please note that enabling debugging options may affect system performance.
300 - ``RTE_LIBRTE_SFC_EFX_DEBUG`` (undefined by default)
302 Enable compilation of the extra run-time consistency checks.
305 Per-Device Parameters
306 ~~~~~~~~~~~~~~~~~~~~~
308 The following per-device parameters can be passed via EAL PCI device
309 whitelist option like "-w 02:00.0,arg1=value1,...".
311 Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
312 boolean parameters value.
314 - ``rx_datapath`` [auto|efx|ef10|ef10_essb] (default **auto**)
316 Choose receive datapath implementation.
317 **auto** allows the driver itself to make a choice based on firmware
318 features available and required by the datapath implementation.
319 **efx** chooses libefx-based datapath which supports Rx scatter.
320 Supported for SFN7xxx, SFN8xxx and X2xxx family adapters only.
321 **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
322 more efficient than libefx-based and provides richer packet type
324 **ef10_essb** chooses SFNX2xxx equal stride super-buffer datapath
325 which may be used on DPDK firmware variant only
326 (see notes about its limitations above).
327 **ef100** chooses EF100 native datapath which is the only supported
328 Rx datapath for EF100 architecture based NICs.
330 - ``tx_datapath`` [auto|efx|ef10|ef10_simple|ef100] (default **auto**)
332 Choose transmit datapath implementation.
333 **auto** allows the driver itself to make a choice based on firmware
334 features available and required by the datapath implementation.
335 **efx** chooses libefx-based datapath which supports VLAN insertion
336 (full-feature firmware variant only), TSO and multi-segment mbufs.
337 Mbuf segments may come from different mempools, and mbuf reference
338 counters are treated responsibly.
339 Supported for SFN7xxx, SFN8xxx and X2xxx family adapters only.
340 **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
341 more efficient than libefx-based but has no VLAN insertion support yet.
342 Mbuf segments may come from different mempools, and mbuf reference
343 counters are treated responsibly.
344 **ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
345 is even more faster then **ef10** but does not support multi-segment
346 mbufs, disallows multiple mempools and neglects mbuf reference counters.
347 **ef100** chooses EF100 native datapath which supports multi-segment
348 mbufs, VLAN insertion, inner/outer IPv4 and TCP/UDP checksum and TCP
349 segmentation offloads including VXLAN and GENEVE IPv4/IPv6 tunnels.
351 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
353 Choose hardware tuning to be optimized for either throughput or
355 **auto** allows NIC firmware to make a choice based on
356 installed licenses and firmware variant configured using **sfboot**.
358 - ``stats_update_period_ms`` [long] (default **1000**)
360 Adjust period in milliseconds to update port hardware statistics.
361 The accepted range is 0 to 65535. The value of **0** may be used
362 to disable periodic statistics update. One should note that it's
363 only possible to set an arbitrary value on SFN8xxx and X2xxx provided that
364 firmware version is 6.2.1.1033 or higher, otherwise any positive
365 value will select a fixed update period of **1000** milliseconds
367 - ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
368 capture-packed-stream|dpdk] (default **dont-care**)
370 Choose the preferred firmware variant to use.
371 The parameter is supported for SFN7xxX, SFN8xxx and X2xxx families only.
372 In order for the selected option to have an effect, the **sfboot** utility
373 must be configured with the **auto** firmware-variant option.
374 The preferred firmware variant applies to all ports on the NIC.
375 **dont-care** ensures that the driver can attach to an unprivileged function.
376 The datapath firmware type to use is controlled by the **sfboot**
378 **full-feature** chooses full featured firmware.
379 **ultra-low-latency** chooses firmware with fewer features but lower latency.
380 **capture-packed-stream** chooses firmware for SolarCapture packed stream
382 **dpdk** chooses DPDK firmware with equal stride super-buffer Rx mode
383 for higher Rx packet rate and packet marks support and firmware subvariant
384 without checksumming on transmit for higher Tx packet rate if
385 checksumming is not required.
387 - ``rxd_wait_timeout_ns`` [long] (default **200 us**)
389 Adjust timeout in nanoseconds to head-of-line block to wait for
391 The accepted range is 0 to 400 ms.
392 Flow control should be enabled to make it work.
393 The value of **0** disables it and packets are dropped immediately.
394 When a packet is dropped because of no Rx descriptors,
395 ``rx_nodesc_drop_cnt`` counter grows.
396 The feature is supported only by the DPDK firmware variant when equal
397 stride super-buffer Rx mode is used.
400 Dynamic Logging Parameters
401 ~~~~~~~~~~~~~~~~~~~~~~~~~~
403 One may leverage EAL option "--log-level" to change default levels
404 for the log types supported by the driver. The option is used with
405 an argument typically consisting of two parts separated by a colon.
407 Level value is the last part which takes a symbolic name (or integer).
408 Log type is the former part which may shell match syntax.
409 Depending on the choice of the expression, the given log level may
410 be used either for some specific log type or for a subset of types.
412 SFC EFX PMD provides the following log types available for control:
414 - ``pmd.net.sfc.driver`` (default level is **notice**)
416 Affects driver-wide messages unrelated to any particular devices.
418 - ``pmd.net.sfc.main`` (default level is **notice**)
420 Matches a subset of per-port log types registered during runtime.
421 A full name for a particular type may be obtained by appending a
422 dot and a PCI device identifier (``XXXX:XX:XX.X``) to the prefix.
424 - ``pmd.net.sfc.mcdi`` (default level is **notice**)
426 Extra logging of the communication with the NIC's management CPU.
427 The format of the log is consumed by the Solarflare netlogdecode
428 cross-platform tool. May be managed per-port, as explained above.