2 Copyright (c) 2016 Solarflare Communications Inc.
5 This software was jointly developed between OKTET Labs (under contract
6 for Solarflare) and Solarflare Communications, Inc.
8 Redistribution and use in source and binary forms, with or without
9 modification, are permitted provided that the following conditions are met:
11 1. Redistributions of source code must retain the above copyright notice,
12 this list of conditions and the following disclaimer.
13 2. Redistributions in binary form must reproduce the above copyright notice,
14 this list of conditions and the following disclaimer in the documentation
15 and/or other materials provided with the distribution.
17 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
18 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
19 THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
20 PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
21 CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22 EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23 PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24 OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25 WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26 OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
27 EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 Solarflare libefx-based Poll Mode Driver
30 ========================================
32 The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
33 for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters.
34 SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
36 More information can be found at `Solarflare Communications website
37 <http://solarflare.com>`_.
43 SFC EFX PMD has support for:
45 - Multiple transmit and receive queues
47 - Link state information including link status change interrupt
49 - IPv4/IPv6 TCP/UDP transmit checksum offload
51 - Port hardware statistics
53 - Extended statistics (see Solarflare Server Adapter User's Guide for
54 the statistics description)
60 - Jumbo frames up to 9K
67 Non-supported Features
68 ----------------------
70 The features not yet supported include:
72 - Receive queue interupts
74 - Priority-based flow control
78 - Configurable RX CRC stripping (always stripped)
80 - Header split on receive
94 Due to requirements on receive buffer alignment and usage of the receive
95 buffer for the auxiliary packet information provided by the NIC up to
96 extra 269 (14 bytes prefix plus up to 255 bytes for end padding) bytes may be
97 required in the receive buffer.
98 It should be taken into account when mbuf pool for receive is created.
104 - Solarflare Flareon [Ultra] Server Adapters:
106 - Solarflare SFN8522 Dual Port SFP+ Server Adapter
108 - Solarflare SFN8542 Dual Port QSFP+ Server Adapter
110 - Solarflare SFN7002F Dual Port SFP+ Server Adapter
112 - Solarflare SFN7004F Quad Port SFP+ Server Adapter
114 - Solarflare SFN7042Q Dual Port QSFP+ Server Adapter
116 - Solarflare SFN7122F Dual Port SFP+ Server Adapter
118 - Solarflare SFN7124F Quad Port SFP+ Server Adapter
120 - Solarflare SFN7142Q Dual Port QSFP+ Server Adapter
122 - Solarflare SFN7322F Precision Time Synchronization Server Adapter
128 - Requires firmware version:
130 - SFN7xxx: **4.7.1.1001** or higher
132 - SFN8xxx: **6.0.2.1004** or higher
134 Visit `Solarflare Support Downloads <https://support.solarflare.com>`_ to get
135 Solarflare Utilities (either Linux or FreeBSD) with the latest firmware.
136 Follow instructions from Solarflare Server Adapter User's Guide to
137 update firmware and configure the adapter.
140 Pre-Installation Configuration
141 ------------------------------
147 The following options can be modified in the ``.config`` file.
148 Please note that enabling debugging options may affect system performance.
150 - ``CONFIG_RTE_LIBRTE_SFC_EFX_PMD`` (default **y**)
152 Enable compilation of Solarflare libefx-based poll-mode driver.
154 - ``CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG`` (default **n**)
156 Enable compilation of the extra run-time consistency checks.
159 Per-Device Parameters
160 ~~~~~~~~~~~~~~~~~~~~~
162 The following per-device parameters can be passed via EAL PCI device
163 whitelist option like "-w 02:00.0,arg1=value1,...".
165 Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
166 boolean parameters value.
168 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
170 Choose hardware tunning to be optimized for either throughput or
172 **auto** allows NIC firmware to make a choice based on
173 installed licences and firmware variant configured using **sfboot**.
175 - ``debug_init`` [bool] (default **n**)
177 Enable extra logging during device intialization and startup.
179 - ``mcdi_logging`` [bool] (default **n**)
181 Enable extra logging of the communication with the NIC's management CPU.
182 The logging is done using RTE_LOG() with INFO level and PMD type.
183 The format is consumed by the Solarflare netlogdecode cross-platform tool.