net/sfc: support link status change interrupt
[dpdk.git] / doc / guides / nics / sfc_efx.rst
1 ..  BSD LICENSE
2     Copyright (c) 2016 Solarflare Communications Inc.
3     All rights reserved.
4
5     This software was jointly developed between OKTET Labs (under contract
6     for Solarflare) and Solarflare Communications, Inc.
7
8     Redistribution and use in source and binary forms, with or without
9     modification, are permitted provided that the following conditions are met:
10
11     1. Redistributions of source code must retain the above copyright notice,
12        this list of conditions and the following disclaimer.
13     2. Redistributions in binary form must reproduce the above copyright notice,
14        this list of conditions and the following disclaimer in the documentation
15        and/or other materials provided with the distribution.
16
17     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
18     AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
19     THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
20     PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
21     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22     EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24     OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25     WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
27     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28
29 Solarflare libefx-based Poll Mode Driver
30 ========================================
31
32 The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
33 for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters.
34 SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
35
36 More information can be found at `Solarflare Communications website
37 <http://solarflare.com>`_.
38
39
40 Features
41 --------
42
43 SFC EFX PMD has support for:
44
45 - Multiple transmit and receive queues
46
47 - Link state information including link status change interrupt
48
49 - IPv4/IPv6 TCP/UDP transmit checksum offload
50
51 - Port hardware statistics
52
53 - Extended statistics (see Solarflare Server Adapter User's Guide for
54   the statistics description)
55
56 - Basic flow control
57
58
59 Non-supported Features
60 ----------------------
61
62 The features not yet supported include:
63
64 - Receive queue interupts
65
66 - Priority-based flow control
67
68 - Loopback
69
70 - Configurable RX CRC stripping (always stripped)
71
72 - Header split on receive
73
74 - VLAN filtering
75
76 - VLAN stripping
77
78 - Scattered receive
79
80 - LRO
81
82
83 Limitations
84 -----------
85
86 Due to requirements on receive buffer alignment and usage of the receive
87 buffer for the auxiliary packet information provided by the NIC up to
88 extra 269 (14 bytes prefix plus up to 255 bytes for end padding) bytes may be
89 required in the receive buffer.
90 It should be taken into account when mbuf pool for receive is created.
91
92
93 Supported NICs
94 --------------
95
96 - Solarflare Flareon [Ultra] Server Adapters:
97
98    - Solarflare SFN8522 Dual Port SFP+ Server Adapter
99
100    - Solarflare SFN8542 Dual Port QSFP+ Server Adapter
101
102    - Solarflare SFN7002F Dual Port SFP+ Server Adapter
103
104    - Solarflare SFN7004F Quad Port SFP+ Server Adapter
105
106    - Solarflare SFN7042Q Dual Port QSFP+ Server Adapter
107
108    - Solarflare SFN7122F Dual Port SFP+ Server Adapter
109
110    - Solarflare SFN7124F Quad Port SFP+ Server Adapter
111
112    - Solarflare SFN7142Q Dual Port QSFP+ Server Adapter
113
114    - Solarflare SFN7322F Precision Time Synchronization Server Adapter
115
116
117 Prerequisites
118 -------------
119
120 - Requires firmware version:
121
122    - SFN7xxx: **4.7.1.1001** or higher
123
124    - SFN8xxx: **6.0.2.1004** or higher
125
126 Visit `Solarflare Support Downloads <https://support.solarflare.com>`_ to get
127 Solarflare Utilities (either Linux or FreeBSD) with the latest firmware.
128 Follow instructions from Solarflare Server Adapter User's Guide to
129 update firmware and configure the adapter.
130
131
132 Pre-Installation Configuration
133 ------------------------------
134
135
136 Config File Options
137 ~~~~~~~~~~~~~~~~~~~
138
139 The following options can be modified in the ``.config`` file.
140 Please note that enabling debugging options may affect system performance.
141
142 - ``CONFIG_RTE_LIBRTE_SFC_EFX_PMD`` (default **y**)
143
144   Enable compilation of Solarflare libefx-based poll-mode driver.
145
146 - ``CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG`` (default **n**)
147
148   Enable compilation of the extra run-time consistency checks.
149
150
151 Per-Device Parameters
152 ~~~~~~~~~~~~~~~~~~~~~
153
154 The following per-device parameters can be passed via EAL PCI device
155 whitelist option like "-w 02:00.0,arg1=value1,...".
156
157 Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
158 boolean parameters value.
159
160 - ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
161
162   Choose hardware tunning to be optimized for either throughput or
163   low-latency.
164   **auto** allows NIC firmware to make a choice based on
165   installed licences and firmware variant configured using **sfboot**.
166
167 - ``debug_init`` [bool] (default **n**)
168
169   Enable extra logging during device intialization and startup.
170
171 - ``mcdi_logging`` [bool] (default **n**)
172
173   Enable extra logging of the communication with the NIC's management CPU.
174   The logging is done using RTE_LOG() with INFO level and PMD type.
175   The format is consumed by the Solarflare netlogdecode cross-platform tool.