4 .. **Read this first.**
6 The text in the sections below explains how to update the release notes.
8 Use proper spelling, capitalization and punctuation in all sections.
10 Variable and config names should be quoted as fixed width text:
13 Build the docs and view the output file to ensure the changes are correct::
17 xdg-open build/doc/html/guides/rel_notes/release_17_11.html
23 .. This section should contain new features added in this release. Sample
26 * **Add a title in the past tense with a full stop.**
28 Add a short 1-2 sentence description in the past tense. The description
29 should be enough to allow someone scanning the release notes to
30 understand the new feature.
32 If the feature adds a lot of sub-features you can use a bullet list like
35 * Added feature foo to do something.
36 * Enhanced feature bar to do something else.
38 Refer to the previous release notes for examples.
40 This section is a comment. do not overwrite or remove it.
41 Also, make sure to start the actual text at the margin.
42 =========================================================
44 * **Extended port_id range from uint8_t to uint16_t.**
46 Increased the ``port_id`` range from 8 bits to 16 bits in order to support
47 more than 256 ports in DPDK. All ethdev APIs which have ``port_id`` as
48 parameter have been changed.
50 * **Modified the return type of rte_eth_stats_reset.**
52 Changed return type of ``rte_eth_stats_reset`` from ``void`` to ``int`` so
53 that the caller can determine whether a device supports the operation or not
54 and if the operation was carried out.
56 * **Added a new driver for Marvell Armada 7k/8k devices.**
58 Added the new ``mrvl`` net driver for Marvell Armada 7k/8k devices. See the
59 :doc:`../nics/mvpp2` NIC guide for more details on this new driver.
61 * **Updated mlx4 driver.**
63 Updated the mlx4 driver including the following changes:
65 * Isolated mode (rte_flow) can now be enabled anytime, not only during
66 initial device configuration.
67 * Flow rules now support up to 4096 priority levels usable at will by
69 * Enhanced error message to help debugging invalid/unsupported flow rules.
70 * Flow rules matching all multicast and promiscuous traffic are now allowed.
71 * No more software restrictions on flow rules with the RSS action, their
72 configuration is much more flexible.
73 * Significantly reduced memory footprint for Rx and Tx queue objects.
74 * While supported, UDP RSS is temporarily disabled due to a remaining issue
75 with its support in the Linux kernel.
76 * The new RSS implementation does not automatically spread traffic according
77 to the inner packet of VXLAN frames anymore, only the outer one (like
79 * Partial (Tx only) support for secondary processes was broken and had to be
81 * Refactored driver to get rid of dependency on the components provided by
82 Mellanox OFED and instead rely on the current and public rdma-core
83 package and Linux version from now on.
84 * Removed compile-time limitation on number of device instances the PMD
87 * **Updated mlx5 driver.**
89 Updated the mlx5 driver including the following changes:
91 * Enabled the PMD to run on top of upstream Linux kernel and rdma-core
92 libs, removing the dependency on specific Mellanox OFED libraries.
93 * Improved PMD latency performance.
94 * Improved PMD memory footprint.
95 * Added support for vectorized Rx/Tx burst for ARMv8.
96 * Added support for secondary process.
97 * Added support for flow counters.
98 * Added support for Rx hardware timestamp offload.
99 * Added support for device removal event.
101 * **Added SoftNIC PMD.**
103 Added a new SoftNIC PMD. This virtual device provides applications with
104 software fallback support for traffic management.
106 * **Added support for NXP DPAA Devices.**
108 Added support for NXP's DPAA devices - LS104x series. This includes:
111 * DPAA Mempool driver for supporting offloaded packet memory pool
112 * DPAA PMD for DPAA devices
114 See the :doc:`../nics/dpaa` document for more details of this new driver.
116 * **Updated support for Cavium OCTEONTX Device.**
118 Updated support for Cavium's OCTEONTX device (CN83xx). This includes:
120 * OCTEONTX Mempool driver for supporting offloaded packet memory pool
121 * OCTEONTX Ethdev PMD
122 * OCTEONTX Eventdev-Ethdev Rx adapter
124 See the :doc:`../nics/octeontx` document for more details of this new driver.
126 * **Added PF support to the Netronome NFP PMD.**
128 Added PF support to the Netronome NFP PMD. Previously the NFP PMD only
129 supported VFs. PF support is just as a basic DPDK port and has no VF
132 PF support comes with firmware upload support which allows the PMD to
133 independently work from kernel netdev NFP drivers.
135 NFP 4000 devices are also now supported along with previous 6000 devices.
137 * **Updated bnxt PMD.**
139 Major enhancements include:
141 * Support for Flow API
142 * Support for Tx and Rx descriptor status functions
144 * **Added bus agnostic functions to cryptodev for PMD initialization**
146 Added new PMD assist, bus independent, functions
147 ``rte_cryptodev_pmd_parse_input_args()``, ``rte_cryptodev_pmd_create()`` and
148 ``rte_cryptodev_pmd_destroy()`` for drivers to manage creation and
149 destruction of new device instances.
151 * **Updated QAT crypto PMD.**
153 Added several performance enhancements:
155 * Removed atomics from the internal queue pair structure.
156 * Added coalesce writes to HEAD CSR on response processing.
157 * Added coalesce writes to TAIL CSR on request processing.
159 In addition support was added for the AES CCM algorithm.
161 * **Updated the AESNI MB PMD.**
163 The AESNI MB PMD has been updated with additional support for:
165 * The DES CBC algorithm.
166 * The DES DOCSIS BPI algorithm.
168 This change requires version 0.47 of the IPSec Multi-buffer library. For
169 more details see the :doc:`../cryptodevs/aesni_mb` documentation.
171 * **Updated the OpenSSL PMD.**
173 The OpenSSL PMD has been updated with additional support for:
175 * The DES CBC algorithm.
176 * The AES CCM algorithm.
178 * **Added NXP DPAA SEC crypto PMD.**
180 A new ``dpaa_sec`` hardware based crypto PMD for NXP DPAA devices has been
181 added. See the :doc:`../cryptodevs/dpaa_sec` document for more details.
183 * **Added MRVL crypto PMD.**
185 A new crypto PMD has been added, which provides several ciphering and hashing
186 algorithms. All cryptography operations use the MUSDK library crypto API.
187 See the :doc:`../cryptodevs/mrvl` document for more details.
189 * **Add new benchmarking mode to dpdk-test-crypto-perf application.**
191 Added a new "PMD cyclecount" benchmark mode to the ``dpdk-test-crypto-perf``
192 application to display a detailed breakdown of CPU cycles used by hardware
195 * **Added the Security Offload Library.**
197 Added an experimental library - ``rte_security``. This provide security APIs
198 for protocols like IPSec using inline ipsec offload to ethernet devices or
199 full protocol offload with lookaside crypto devices.
201 See the :doc:`../prog_guide/rte_security` section of the DPDK Programmers
202 Guide document for more information.
204 * **Updated the DPAA2_SEC crypto driver to support rte_security.**
206 Updated the ``dpaa2_sec`` crypto PMD to support ``rte_security`` lookaside
207 protocol offload for IPSec.
209 * **Updated the IXGBE ethernet driver to support rte_security.**
211 Updated ixgbe ethernet PMD to support ``rte_security`` inline IPSec offload.
213 * **Updated i40e driver to support GTP-C/GTP-U.**
215 Updated i40e PMD to support GTP-C/GTP-U with GTP-C/GTP-U supporting
216 profiles which can be programmed by dynamic device personalization (DDP)
219 * **Added the i40e ethernet driver to support queue region feature.**
221 This feature enable queue regions configuration for RSS in PF,
222 so that different traffic classes or different packet
223 classification types can be separated into different queues in
224 different queue regions.
226 * **Updated ipsec-secgw application to support rte_security.**
228 Updated the ``ipsec-secgw`` sample application to support ``rte_security``
229 actions for ipsec inline and full protocol offload using lookaside crypto
232 * **Added IOMMU support to libvhost-user**
234 Implemented device IOTLB in the Vhost-user backend, and enabled Virtio's
235 IOMMU feature. The feature is disabled by default, and can be enabled by
236 setting ``RTE_VHOST_USER_IOMMU_SUPPORT`` flag at vhost device registration
239 * **Added the Event Ethernet Adapter Library.**
241 Added the Event Ethernet Adapter library. This library provides APIs for
242 eventdev applications to configure the ethdev for eventdev packet flow.
244 * **Updated DPAA2 Event PMD for the Event Ethernet Adapter.**
246 Added support for the eventdev ethernet adapter for DPAA2.
248 * **Added Membership library (rte_member).**
250 Added a new data structure library called the Membership Library.
252 The Membership Library is an extension and generalization of a traditional
253 filter (for example Bloom Filter) structure that has multiple usages in a
254 wide variety of workloads and applications. In general, the Membership
255 Library is a data structure that provides a "set-summary" and responds to
256 set-membership queries whether a certain member belongs to a set(s).
258 The library provides APIs for DPDK applications to insert a new member,
259 delete an existing member, and query the existence of a member in a given
260 set, or a group of sets. For the case of a group of sets the library will
261 return not only whether the element has been inserted in one of the sets but
262 also which set it belongs to.
264 See the :doc:`../prog_guide/member_lib` documentation in the Programmers
265 Guide, for more information.
267 * **Added the Generic Segmentation Offload Library.**
269 Added the Generic Segmentation Offload (GSO) library to enable
270 applications to split large packets (e.g. MTU is 64KB) into small
271 ones (e.g. MTU is 1500B). Supported packet types are:
274 * VxLAN packets, which must have an outer IPv4 header, and contain
275 an inner TCP/IPv4 packet.
276 * GRE packets, which must contain an outer IPv4 header, and inner
279 The GSO library doesn't check if the input packets have correct
280 checksums, and doesn't update checksums for output packets.
281 Additionally, the GSO library doesn't process IP fragmented packets.
283 * **Added the Flow Classification Library.**
285 Added an experimental Flow Classification library to provide APIs for DPDK
286 applications to classify an input packet by matching it against a set of
287 flow rules. It uses the ``librte_table`` API to manage the flow rules.
293 .. This section should contain bug fixes added to the relevant
294 sections. Sample format:
296 * **code/section Fixed issue in the past tense with a full stop.**
298 Add a short 1-2 sentence description of the resolved issue in the past
301 The title should contain the code/lib section like a commit message.
303 Add the entries in alphabetic order in the relevant sections below.
305 This section is a comment. do not overwrite or remove it.
306 Also, make sure to start the actual text at the margin.
307 =========================================================
310 * **Service core fails to call service callback due to atomic lock**
312 In a specific configuration of multi-thread unsafe services and service
313 cores, a service core previously did not correctly release the atomic lock
314 on the service. This would result in the cores polling the service, but it
315 looked like another thread was executing the service callback. The logic for
316 atomic locking of the services has been fixed and refactored for readability.
322 .. This section should contain API changes. Sample format:
324 * Add a short 1-2 sentence description of the API change. Use fixed width
325 quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past
328 This section is a comment. do not overwrite or remove it.
329 Also, make sure to start the actual text at the margin.
330 =========================================================
332 * **Ethdev device name length increased.**
334 The size of internal device name has been increased to 64 characters
335 to allow for storing longer bus specific names.
337 * **Removed the Ethdev RTE_ETH_DEV_DETACHABLE flag.**
339 Removed the Ethdev ``RTE_ETH_DEV_DETACHABLE`` flag. This flag is not
340 required anymore, with the new hotplug implementation. It has been removed
341 from the ether library. Its semantics are now expressed at the bus and PMD
344 * **Service cores API updated for usability**
346 The service cores API has been changed, removing pointers from the API where
347 possible, and instead using integer IDs to identify each service. This
348 simplifies application code, aids debugging, and provides better
349 encapsulation. A summary of the main changes made is as follows:
351 * Services identified by ID not by ``rte_service_spec`` pointer
352 * Reduced API surface by using ``set`` functions instead of enable/disable
353 * Reworked ``rte_service_register`` to provide the service ID to registrar
354 * Reworked start and stop APIs into ``rte_service_runstate_set``
355 * Added API to set runstate of service implementation to indicate readiness
357 * **The following changes have been made in the mempool library**
359 * Moved ``flags`` datatype from ``int`` to ``unsigned int`` for
361 * Removed ``__rte_unused int flag`` param from ``rte_mempool_generic_put``
362 and ``rte_mempool_generic_get`` API.
363 * Added ``flags`` param in ``rte_mempool_xmem_size`` and
364 ``rte_mempool_xmem_usage``.
365 * ``rte_mem_phy2mch`` was used in Xen dom0 to obtain the physical address;
366 remove this API as Xen dom0 support was removed.
368 * **Added IOVA aliases related to physical address handling.**
370 Some data types, structure members and functions related to physical address
371 handling are deprecated and have new aliases with IOVA wording. For example:
373 * ``phys_addr_t`` can be often replaced by ``rte_iova_t`` of same size.
374 * ``RTE_BAD_PHYS_ADDR`` is often replaced by ``RTE_BAD_IOVA`` of same value.
375 * ``rte_memseg.phys_addr`` is aliased with ``rte_memseg.iova_addr``.
376 * ``rte_mem_virt2phy()`` can often be replaced by ``rte_mem_virt2iova``.
377 * ``rte_malloc_virt2phy`` is aliased with ``rte_malloc_virt2iova``.
378 * ``rte_memzone.phys_addr`` is aliased with ``rte_memzone.iova``.
379 * ``rte_mempool_objhdr.physaddr`` is aliased with
380 ``rte_mempool_objhdr.iova``.
381 * ``rte_mempool_memhdr.phys_addr`` is aliased with
382 ``rte_mempool_memhdr.iova``.
383 * ``rte_mempool_virt2phy()`` can be replaced by ``rte_mempool_virt2iova()``.
384 * ``rte_mempool_populate_phys*()`` are aliased with
385 ``rte_mempool_populate_iova*()``
386 * ``rte_mbuf.buf_physaddr`` is aliased with ``rte_mbuf.buf_iova``.
387 * ``rte_mbuf_data_dma_addr*()`` are aliased with ``rte_mbuf_data_iova*()``.
388 * ``rte_pktmbuf_mtophys*`` are aliased with ``rte_pktmbuf_iova*()``.
390 * **PCI bus API moved outside of the EAL**
392 The PCI bus previously implemented within the EAL has been moved.
393 A first part has been added as an RTE library providing PCI helpers to
394 parse device locations or other such utilities.
395 A second part consisting of the actual bus driver has been moved to its
396 proper subdirectory, without changing its functionalities.
398 As such, several PCI-related functions are not exposed by the EAL anymore:
402 * ``rte_pci_ioport_map``
403 * ``rte_pci_ioport_read``
404 * ``rte_pci_ioport_unmap``
405 * ``rte_pci_ioport_write``
406 * ``rte_pci_map_device``
408 * ``rte_pci_probe_one``
409 * ``rte_pci_read_config``
410 * ``rte_pci_register``
412 * ``rte_pci_unmap_device``
413 * ``rte_pci_unregister``
414 * ``rte_pci_write_config``
416 These functions are made available either as part of ``librte_pci`` or
419 * **Moved vdev bus APIs outside of the EAL**
421 Moved the following APIs from ``librte_eal`` to ``librte_bus_vdev``:
424 * ``rte_vdev_register``
425 * ``rte_vdev_uninit``
426 * ``rte_vdev_unregister``
428 * **Add return value to stats_get dev op API**
430 The ``stats_get`` dev op API return value has been changed to be int.
431 In this way PMDs can return an error value in case of failure at stats
432 getting process time.
434 * **Modified the rte_cryptodev_allocate_driver function.**
436 Modified the ``rte_cryptodev_allocate_driver()`` function in the cryptodev
437 library. An extra parameter ``struct cryptodev_driver *crypto_drv`` has been
440 * **Removed virtual device bus specific functions from librte_cryptodev.**
442 The functions ``rte_cryptodev_vdev_parse_init_params()`` and
443 ``rte_cryptodev_vdev_pmd_init()`` have been removed from librte_cryptodev
444 and have been replaced by non bus specific functions
445 ``rte_cryptodev_pmd_parse_input_args()`` and ``rte_cryptodev_pmd_create()``.
447 The ``rte_cryptodev_create_vdev()`` function was removed to avoid the
448 dependency on vdev in librte_cryptodev; instead, users can call
449 ``rte_vdev_init()`` directly.
451 * **Removed PCI device bus specific functions from librte_cryptodev.**
453 The functions ``rte_cryptodev_pci_generic_probe()`` and
454 ``rte_cryptodev_pci_generic_remove()`` have been removed from librte_cryptodev
455 and have been replaced by non bus specific functions
456 ``rte_cryptodev_pmd_create()`` and ``rte_cryptodev_pmd_destroy()``.
458 * **Removed deprecated functions to manage log level or type.**
460 The functions ``rte_set_log_level()``, ``rte_get_log_level()``,
461 ``rte_set_log_type()`` and ``rte_get_log_type()`` have been removed.
463 They are respectively replaced by ``rte_log_set_global_level()``,
464 ``rte_log_get_global_level()``, ``rte_log_set_level()`` and
465 ``rte_log_get_level()``.
467 * **Removed mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT.**
469 The ``mbuf`` flags ``PKT_RX_VLAN_PKT`` and ``PKT_RX_QINQ_PKT`` have
470 been removed since their behavior was not properly described.
472 * **Added mbuf flags PKT_RX_VLAN and PKT_RX_QINQ.**
474 Two ``mbuf`` flags have been added to indicate that the VLAN
475 identifier has been saved in in the ``mbuf`` structure. For instance:
477 - If VLAN is not stripped and TCI is saved: ``PKT_RX_VLAN``
478 - If VLAN is stripped and TCI is saved: ``PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED``
480 * **Modified the vlan_offload_set_t function prototype in the ethdev library.**
482 Modified the ``vlan_offload_set_t`` function prototype in the ethdev
483 library. The return value has been changed from ``void`` to ``int`` so the
484 caller can determine whether the backing device supports the operation or if
485 the operation was successfully performed.
491 .. This section should contain ABI changes. Sample format:
493 * Add a short 1-2 sentence description of the ABI change that was announced
494 in the previous releases and made in this release. Use fixed width quotes
495 for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
497 This section is a comment. do not overwrite or remove it.
498 Also, make sure to start the actual text at the margin.
499 =========================================================
501 * **Extended port_id range.**
503 The size of the field ``port_id`` in the ``rte_eth_dev_data`` structure
504 has changed, as described in the `New Features` section above.
506 * **New parameter added to rte_eth_dev.**
508 A new parameter ``security_ctx`` has been added to ``rte_eth_dev`` to
509 support security operations like IPSec inline.
511 * **New parameter added to rte_cryptodev.**
513 A new parameter ``security_ctx`` has been added to ``rte_cryptodev`` to
514 support security operations like lookaside crypto.
520 .. This section should contain removed items in this release. Sample format:
522 * Add a short 1-2 sentence description of the removed item in the past
525 This section is a comment. do not overwrite or remove it.
526 Also, make sure to start the actual text at the margin.
527 =========================================================
529 * Xen dom0 in EAL has been removed, as well as the xenvirt PMD and vhost_xen.
531 * The crypto performance unit tests have been removed,
532 replaced by the ``dpdk-test-crypto-perf`` application.
535 Shared Library Versions
536 -----------------------
538 .. Update any library version updated in this release and prepend with a ``+``
542 + librte_cfgfile.so.2
545 This section is a comment. do not overwrite or remove it.
546 =========================================================
549 The libraries prepended with a plus sign were incremented in this version.
554 + librte_bitratestats.so.2
555 + librte_bus_dpaa.so.1
556 + librte_bus_fslmc.so.1
557 + librte_bus_pci.so.1
558 + librte_bus_vdev.so.1
561 + librte_cryptodev.so.4
562 librte_distributor.so.1
565 + librte_eventdev.so.3
566 + librte_flow_classify.so.1
574 librte_latencystats.so.1
577 + librte_mempool.so.3
584 + librte_pmd_bnxt.so.2
585 + librte_pmd_bond.so.2
586 + librte_pmd_i40e.so.2
587 + librte_pmd_ixgbe.so.2
589 + librte_pmd_softnic.so.1
590 + librte_pmd_vhost.so.2
596 + librte_security.so.1
605 .. This section should contain a list of platforms that were tested with this
610 * <vendor> platform with <vendor> <type of devices> combinations
615 * Other relevant details...
617 This section is a comment. do not overwrite or remove it.
618 Also, make sure to start the actual text at the margin.
619 =========================================================
621 * Intel(R) platforms with Intel(R) NICs combinations
625 * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
626 * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
627 * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
628 * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
629 * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
630 * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
631 * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
632 * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
633 * Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
641 * Red Hat Enterprise Linux Server release 7.3
642 * SUSE Enterprise Linux 12
649 * Intel(R) 82599ES 10 Gigabit Ethernet Controller
651 * Firmware version: 0x61bf0001
652 * Device id (pf/vf): 8086:10fb / 8086:10ed
653 * Driver version: 5.2.3 (ixgbe)
655 * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
657 * Firmware version: 0x800003e7
658 * Device id (pf/vf): 8086:15ad / 8086:15a8
659 * Driver version: 4.4.6 (ixgbe)
661 * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
663 * Firmware version: 6.01 0x80003205
664 * Device id (pf/vf): 8086:1572 / 8086:154c
665 * Driver version: 2.1.26 (i40e)
667 * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
669 * Firmware version: 6.01 0x80003204
670 * Device id (pf/vf): 8086:1572 / 8086:154c
671 * Driver version: 2.1.26 (i40e)
673 * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
675 * Firmware version: 6.01 0x80003221
676 * Device id (pf/vf): 8086:158b
677 * Driver version: 2.1.26 (i40e)
679 * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
681 * Firmware version: 6.01 0x8000321c
682 * Device id (pf/vf): 8086:1583 / 8086:154c
683 * Driver version: 2.1.26 (i40e)
685 * Intel(R) Corporation I350 Gigabit Network Connection
687 * Firmware version: 1.63, 0x80000dda
688 * Device id (pf/vf): 8086:1521 / 8086:1520
689 * Driver version: 5.3.0-k (igb)
691 * Intel(R) platforms with Mellanox(R) NICs combinations
695 * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
696 * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
697 * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
698 * Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz
699 * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz
700 * Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
704 * Red Hat Enterprise Linux Server release 7.3 (Maipo)
705 * Red Hat Enterprise Linux Server release 7.2 (Maipo)
710 * MLNX_OFED: 4.2-1.0.0.0
714 * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
716 * Host interface: PCI Express 3.0 x8
717 * Device ID: 15b3:1007
718 * Firmware version: 2.42.5000
720 * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
722 * Host interface: PCI Express 3.0 x8
723 * Device ID: 15b3:1013
724 * Firmware version: 12.21.1000
726 * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
728 * Host interface: PCI Express 3.0 x8
729 * Device ID: 15b3:1013
730 * Firmware version: 12.21.1000
732 * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
734 * Host interface: PCI Express 3.0 x8
735 * Device ID: 15b3:1013
736 * Firmware version: 12.21.1000
738 * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
740 * Host interface: PCI Express 3.0 x8
741 * Device ID: 15b3:1013
742 * Firmware version: 12.21.1000
744 * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
746 * Host interface: PCI Express 3.0 x8
747 * Device ID: 15b3:1013
748 * Firmware version: 12.21.1000
750 * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
752 * Host interface: PCI Express 3.0 x16
753 * Device ID: 15b3:1013
754 * Firmware version: 12.21.1000
756 * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
758 * Host interface: PCI Express 3.0 x8
759 * Device ID: 15b3:1013
760 * Firmware version: 12.21.1000
762 * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
764 * Host interface: PCI Express 3.0 x8
765 * Device ID: 15b3:1013
766 * Firmware version: 12.21.1000
768 * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT
771 * Host interface: PCI Express 3.0 x16
772 * Device ID: 15b3:1013
773 * Firmware version: 12.21.1000
775 * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
777 * Host interface: PCI Express 3.0 x16
778 * Device ID: 15b3:1013
779 * Firmware version: 12.21.1000
781 * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
783 * Host interface: PCI Express 3.0 x16
784 * Device ID: 15b3:1013
785 * Firmware version: 12.21.1000
787 * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
789 * Host interface: PCI Express 3.0 x8
790 * Device ID: 15b3:1015
791 * Firmware version: 14.21.1000
793 * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
795 * Host interface: PCI Express 3.0 x8
796 * Device ID: 15b3:1015
797 * Firmware version: 14.21.1000
799 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
801 * Host interface: PCI Express 3.0 x16
802 * Device ID: 15b3:1017
803 * Firmware version: 16.21.1000
805 * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
807 * Host interface: PCI Express 4.0 x16
808 * Device ID: 15b3:1019
809 * Firmware version: 16.21.1000
811 * ARM platforms with Mellanox(R) NICs combinations
815 * Qualcomm ARM 1.1 2500MHz
821 * MLNX_OFED: 4.2-1.0.0.0
825 * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
827 * Host interface: PCI Express 3.0 x8
828 * Device ID: 15b3:1015
829 * Firmware version: 14.21.1000
831 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
833 * Host interface: PCI Express 3.0 x16
834 * Device ID: 15b3:1017
835 * Firmware version: 16.21.1000