4 .. **Read this first.**
6 The text in the sections below explains how to update the release notes.
8 Use proper spelling, capitalization and punctuation in all sections.
10 Variable and config names should be quoted as fixed width text:
13 Build the docs and view the output file to ensure the changes are correct::
17 xdg-open build/doc/html/guides/rel_notes/release_18_05.html
23 .. This section should contain new features added in this release. Sample
26 * **Add a title in the past tense with a full stop.**
28 Add a short 1-2 sentence description in the past tense. The description
29 should be enough to allow someone scanning the release notes to
30 understand the new feature.
32 If the feature adds a lot of sub-features you can use a bullet list like
35 * Added feature foo to do something.
36 * Enhanced feature bar to do something else.
38 Refer to the previous release notes for examples.
40 This section is a comment. Do not overwrite or remove it.
41 Also, make sure to start the actual text at the margin.
42 =========================================================
44 * **Added PMD-recommended Tx and Rx parameters**
46 Applications can now query drivers for device-tuned values of
47 ring sizes, burst sizes, and number of queues.
49 * **Added RSS hash and key update to CXGBE PMD.**
51 Support to update RSS hash and key has been added to CXGBE PMD.
53 * **Added CXGBE VF PMD.**
55 CXGBE VF Poll Mode Driver has been added to run DPDK over Chelsio
56 T5/T6 NIC VF instances.
58 * **Updated Solarflare network PMD.**
60 Updated the sfc_efx driver including the following changes:
62 * Added support for Solarflare XtremeScale X2xxx family adapters.
63 * Added support for NVGRE, VXLAN and GENEVE filters in flow API.
64 * Added support for DROP action in flow API.
66 * **Added Ethernet poll mode driver for AMD XGBE devices.**
68 Added the new ``axgbe`` ethernet poll mode driver for AMD XGBE devices.
69 See the :doc:`../nics/axgbe` nic driver guide for more details on this
72 * **Updated szedata2 PMD.**
74 Added support for new NFB-200G2QL card.
76 * **Added support for Broadcom NetXtreme-S (BCM58800) family of controllers (aka Stingray)**
78 The BCM58800 devices feature a NetXtreme E-Series advanced network controller, a high-performance
79 ARM CPU block, PCI Express (PCIe) Gen3 interfaces, key accelerators for compute offload and a high-
80 speed memory subsystem including L3 cache and DDR4 interfaces, all interconnected by a coherent
81 Network-on-chip (NOC) fabric.
83 The ARM CPU subsystem features eight ARMv8 Cortex-A72 CPUs at 3.0 GHz, arranged in a multi-cluster
86 * **Added support for virtio-user server mode.**
87 In a container environment if the vhost-user backend restarts, there's no way
88 for it to reconnect to virtio-user. To address this, support for server mode
89 is added. In this mode the socket file is created by virtio-user, which the
90 backend connects to. This means that if the backend restarts, it can reconnect
91 to virtio-user and continue communications.
93 * **Added crypto workload support to vhost library.**
95 New APIs are introduced in vhost library to enable virtio crypto support
96 including session creation/deletion handling and translating virtio-crypto
97 request into DPDK crypto operations. A sample application is also introduced.
99 * **Added AMD CCP Crypto PMD.**
101 Added the new ``ccp`` crypto driver for AMD CCP devices. See the
102 :doc:`../cryptodevs/ccp` crypto driver guide for more details on
105 * **Updated AESNI MB PMD.**
107 The AESNI MB PMD has been updated with additional support for:
109 * AES-CMAC (128-bit key).
111 * **Added the Event Timer Adapter Library.**
113 The Event Timer Adapter Library extends the event-based model by introducing
114 APIs that allow applications to arm/cancel event timers that generate
115 timer expiry events. This new type of event is scheduled by an event device
116 along with existing types of events.
118 * **Added device event monitor framework.**
120 Added a general device event monitor framework at EAL, for device dynamic management.
121 Such as device hotplug awareness and actions adopted accordingly. The list of new APIs:
123 * ``rte_dev_event_monitor_start`` and ``rte_dev_event_monitor_stop`` are for
124 the event monitor enable and disable.
125 * ``rte_dev_event_callback_register`` and ``rte_dev_event_callback_unregister``
126 are for the user's callbacks register and unregister.
128 Linux uevent is supported as backend of this device event notification framework.
134 .. This section should contain API changes. Sample format:
136 * Add a short 1-2 sentence description of the API change. Use fixed width
137 quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past
140 This section is a comment. Do not overwrite or remove it.
141 Also, make sure to start the actual text at the margin.
142 =========================================================
144 * mbuf: The control mbuf API has been removed in v18.05. The impacted
145 functions and macros are:
147 - ``rte_ctrlmbuf_init()``
148 - ``rte_ctrlmbuf_alloc()``
149 - ``rte_ctrlmbuf_free()``
150 - ``rte_ctrlmbuf_data()``
151 - ``rte_ctrlmbuf_len()``
152 - ``rte_is_ctrlmbuf()``
155 The packet mbuf API should be used as a replacement.
157 * meter: updated to accommodate configuration profiles.
159 The meter API is changed to support meter configuration profiles. The
160 configuration profile represents the set of configuration parameters
161 for a given meter object, such as the rates and sizes for the token
162 buckets. These configuration parameters were previously the part of meter
163 object internal data strcuture. The separation of the configuration
164 parameters from meter object data structure results in reducing its
165 memory footprint which helps in better cache utilization when large number
166 of meter objects are used.
168 * ethdev: The function ``rte_eth_dev_count``, often mis-used to iterate
169 over ports, is deprecated and replaced by ``rte_eth_dev_count_avail``.
170 There is also a new function ``rte_eth_dev_count_total`` to get the
171 total number of allocated ports, available or not.
172 The hotplug-proof applications should use ``RTE_ETH_FOREACH_DEV`` or
173 ``RTE_ETH_FOREACH_DEV_OWNED_BY`` as port iterators.
175 * ethdev, in struct ``struct rte_eth_dev_info``, field ``rte_pci_device *pci_dev``
176 replaced with field ``struct rte_device *device``.
178 * **Changes to semantics of rte_eth_dev_configure() parameters.**
180 If both the ``nb_rx_q`` and ``nb_tx_q`` parameters are zero,
181 ``rte_eth_dev_configure`` will now use PMD-recommended queue sizes, or if
182 recommendations are not provided by the PMD the function will use ethdev
183 fall-back values. Previously setting both of the parameters to zero would
184 have resulted in ``-EINVAL`` being returned.
186 * **Changes to semantics of rte_eth_rx_queue_setup() parameters.**
188 If the ``nb_rx_desc`` parameter is zero, ``rte_eth_rx_queue_setup`` will
189 now use the PMD-recommended Rx ring size, or in the case where the PMD
190 does not provide a recommendation, will use an ethdev-provided
191 fall-back value. Previously, setting ``nb_rx_desc`` to zero would have
192 resulted in an error.
194 * **Changes to semantics of rte_eth_tx_queue_setup() parameters.**
196 If the ``nb_tx_desc`` parameter is zero, ``rte_eth_tx_queue_setup`` will
197 now use the PMD-recommended Tx ring size, or in the case where the PMD
198 does not provide a recoomendation, will use an ethdev-provided
199 fall-back value. Previously, setting ``nb_tx_desc`` to zero would have
200 resulted in an error.
206 .. This section should contain ABI changes. Sample format:
208 * Add a short 1-2 sentence description of the ABI change that was announced
209 in the previous releases and made in this release. Use fixed width quotes
210 for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
212 This section is a comment. Do not overwrite or remove it.
213 Also, make sure to start the actual text at the margin.
214 =========================================================
216 * ring: the alignment constraints on the ring structure has been relaxed
217 to one cache line instead of two, and an empty cache line padding is
218 added between the producer and consumer structures. The size of the
219 structure and the offset of the fields remains the same on platforms
220 with 64B cache line, but change on other platforms.
222 * **Additional fields in rte_eth_dev_info.**
224 The ``rte_eth_dev_info`` structure has had two extra entries appended to the
225 end of it: ``default_rxportconf`` and ``default_txportconf``. Each of these
226 in turn are ``rte_eth_dev_portconf`` structures containing three fields of
227 type ``uint16_t``: ``burst_size``, ``ring_size``, and ``nb_queues``. These
228 are parameter values recommended for use by the PMD.
234 .. This section should contain removed items in this release. Sample format:
236 * Add a short 1-2 sentence description of the removed item in the past
239 This section is a comment. Do not overwrite or remove it.
240 Also, make sure to start the actual text at the margin.
241 =========================================================
247 .. This section should contain new known issues in this release. Sample format:
249 * **Add title in present tense with full stop.**
251 Add a short 1-2 sentence description of the known issue in the present
252 tense. Add information on any known workarounds.
254 This section is a comment. Do not overwrite or remove it.
255 Also, make sure to start the actual text at the margin.
256 =========================================================
258 * **pdump is not compatible with old applications.**
260 As we changed to use generic multi-process communication for pdump negotiation
261 instead of previous dedicated unix socket way, pdump applications, including
262 dpdk-pdump example and any other applications using librte_pdump, cannot work
263 with older version DPDK primary applications.
266 Shared Library Versions
267 -----------------------
269 .. Update any library version updated in this release and prepend with a ``+``
273 + librte_cfgfile.so.2
276 This section is a comment. Do not overwrite or remove it.
277 =========================================================
280 The libraries prepended with a plus sign were incremented in this version.
286 librte_bitratestats.so.2
288 librte_bus_fslmc.so.1
293 + librte_common_octeontx.so.1
294 librte_cryptodev.so.4
295 librte_distributor.so.1
299 librte_flow_classify.so.1
307 librte_latencystats.so.1
320 librte_pmd_ixgbe.so.2
322 librte_pmd_softnic.so.1
323 librte_pmd_vhost.so.2
339 .. This section should contain a list of platforms that were tested with this
344 * <vendor> platform with <vendor> <type of devices> combinations
349 * Other relevant details...
351 This section is a comment. Do not overwrite or remove it.
352 Also, make sure to start the actual text at the margin.
353 =========================================================