1 .. SPDX-License-Identifier: BSD-3-Clause
2 Copyright 2018 The DPDK contributors
7 .. **Read this first.**
9 The text in the sections below explains how to update the release notes.
11 Use proper spelling, capitalization and punctuation in all sections.
13 Variable and config names should be quoted as fixed width text:
16 Build the docs and view the output file to ensure the changes are correct::
20 xdg-open build/doc/html/guides/rel_notes/release_18_11.html
26 .. This section should contain new features added in this release.
29 * **Add a title in the past tense with a full stop.**
31 Add a short 1-2 sentence description in the past tense.
32 The description should be enough to allow someone scanning
33 the release notes to understand the new feature.
35 If the feature adds a lot of sub-features you can use a bullet list
38 * Added feature foo to do something.
39 * Enhanced feature bar to do something else.
41 Refer to the previous release notes for examples.
43 Suggested order in release notes items:
44 * Core libs (EAL, mempool, ring, mbuf, buses)
45 * Device abstraction libs and PMDs
47 - cryptodev (lib, PMDs)
48 - eventdev (lib, PMDs)
51 * Apps, Examples, Tools (if significative)
53 This section is a comment. Do not overwrite or remove it.
54 Also, make sure to start the actual text at the margin.
55 =========================================================
57 * **Add support to offload more flow match and actions for CXGBE PMD**
59 Flow API support has been enhanced for CXGBE Poll Mode Driver to offload:
61 * Match items: destination MAC address.
62 * Action items: push/pop/rewrite vlan header.
64 * **Added a devarg to use the latest supported vector path in i40e.**
65 A new devarg ``use-latest-supported-vec`` was introduced to allow users to
66 choose the latest vector path that the platform supported. For example, users
67 can use AVX2 vector path on BDW/HSW to get better performance.
69 * **Added support for SR-IOV in netvsc PMD.**
71 The ``netvsc`` poll mode driver now supports the Accelerated Networking
72 SR-IOV option in Hyper-V and Azure. This is an alternative to the previous
73 vdev_netvsc, tap, and failsafe drivers combination.
75 * **Updated failsafe driver.**
77 Updated the failsafe driver including the following changes:
79 * Support for Rx and Tx queues start and stop.
80 * Support for Rx and Tx queues deferred start.
81 * Support for runtime Rx and Tx queues setup.
82 * Support multicast MAC address set.
84 * **Added Event Ethernet Tx Adapter.**
86 Added event ethernet Tx adapter library that provides configuration and
87 data path APIs for the ethernet transmit stage of an event driven packet
88 processing application. These APIs abstract the implementation of the
89 transmit stage and allow the application to use eventdev PMD support or
90 a common implementation.
92 * **Added Distributed Software Eventdev PMD.**
94 Added the new Distributed Software Event Device (DSW), which is a
95 pure-software eventdev driver distributing the work of scheduling
96 among all eventdev ports and the lcores using them. DSW, compared to
97 the SW eventdev PMD, sacrifices load balancing performance to
98 gain better event scheduling throughput and scalability.
100 * **Added ability to switch queue deferred start flag on testpmd app.**
102 Added a console command to testpmd app, giving ability to switch
103 ``rx_deferred_start`` or ``tx_deferred_start`` flag of the specified queue of
104 the specified port. The port must be stopped before the command call in order
105 to reconfigure queues.
111 .. This section should contain API changes. Sample format:
113 * Add a short 1-2 sentence description of the API change.
114 Use fixed width quotes for ``function_names`` or ``struct_names``.
117 This section is a comment. Do not overwrite or remove it.
118 Also, make sure to start the actual text at the margin.
119 =========================================================
121 * eal: ``rte_memseg_list`` structure now has an additional flag indicating
122 whether the memseg list is externally allocated. This will have implications
123 for any users of memseg-walk-related functions, as they will now have to skip
124 externally allocated segments in most cases if the intent is to only iterate
125 over internal DPDK memory.
127 * mbuf: The ``__rte_mbuf_raw_free()`` and ``__rte_pktmbuf_prefree_seg()``
128 functions were deprecated since 17.05 and are replaced by
129 ``rte_mbuf_raw_free()`` and ``rte_pktmbuf_prefree_seg()``.
131 * A new device flag, RTE_ETH_DEV_NOLIVE_MAC_ADDR, changes the order of
132 actions inside rte_eth_dev_start regarding MAC set. Some NICs do not
133 support MAC changes once the port has started and with this new device
134 flag the MAC can be properly configured in any case. This is particularly
135 important for bonding.
137 * The default behaviour of CRC strip offload changed. Without any specific Rx
138 offload flag, default behavior by PMD is now to strip CRC.
139 DEV_RX_OFFLOAD_CRC_STRIP offload flag has been removed.
140 To request keeping CRC, application should set ``DEV_RX_OFFLOAD_KEEP_CRC`` Rx
143 * eventdev: Type of 2nd parameter to ``rte_event_eth_rx_adapter_caps_get()``
144 has been changed from uint8_t to uint16_t.
150 .. This section should contain ABI changes. Sample format:
152 * Add a short 1-2 sentence description of the ABI change
153 that was announced in the previous releases and made in this release.
154 Use fixed width quotes for ``function_names`` or ``struct_names``.
157 This section is a comment. Do not overwrite or remove it.
158 Also, make sure to start the actual text at the margin.
159 =========================================================
161 * eal: added ``legacy_mem`` and ``single_file_segments`` values to
162 ``rte_config`` structure on account of improving DPDK usability when
163 using either ``--legacy-mem`` or ``--single-file-segments`` flags.
165 * eal: EAL library ABI version was changed due to previously announced work on
166 supporting external memory in DPDK:
167 - structure ``rte_memseg_list`` now has a new field indicating length
168 of memory addressed by the segment list
169 - structure ``rte_memseg_list`` now has a new flag indicating whether
170 the memseg list refers to external memory
176 .. This section should contain removed items in this release. Sample format:
178 * Add a short 1-2 sentence description of the removed item
181 This section is a comment. Do not overwrite or remove it.
182 Also, make sure to start the actual text at the margin.
183 =========================================================
186 Shared Library Versions
187 -----------------------
189 .. Update any library version updated in this release
190 and prepend with a ``+`` sign, like this:
193 + librte_cfgfile.so.2
196 This section is a comment. Do not overwrite or remove it.
197 =========================================================
199 The libraries prepended with a plus sign were incremented in this version.
205 librte_bitratestats.so.2
208 librte_bus_fslmc.so.1
211 + librte_bus_vmbus.so.1
214 librte_common_octeontx.so.1
215 librte_compressdev.so.1
216 librte_cryptodev.so.5
217 librte_distributor.so.1
220 + librte_eventdev.so.6
221 librte_flow_classify.so.1
229 librte_latencystats.so.1
242 librte_pmd_ixgbe.so.2
243 librte_pmd_dpaa2_cmdif.so.1
244 librte_pmd_dpaa2_qdma.so.1
246 librte_pmd_softnic.so.1
247 librte_pmd_vhost.so.2
248 + librte_pmd_netvsc.so.1
264 .. This section should contain new known issues in this release. Sample format:
266 * **Add title in present tense with full stop.**
268 Add a short 1-2 sentence description of the known issue
269 in the present tense. Add information on any known workarounds.
271 This section is a comment. Do not overwrite or remove it.
272 Also, make sure to start the actual text at the margin.
273 =========================================================
275 * When using SR-IOV (VF) support with netvsc PMD and the Mellanox mlx5 bifurcated
276 driver; the Linux netvsc device must be brought up before the netvsc device is
277 unbound and passed to the DPDK.
283 .. This section should contain a list of platforms that were tested
288 * <vendor> platform with <vendor> <type of devices> combinations
293 * Other relevant details...
295 This section is a comment. Do not overwrite or remove it.
296 Also, make sure to start the actual text at the margin.
297 =========================================================