net/pcap: support physical interface MAC address
[dpdk.git] / doc / guides / rel_notes / release_18_11.rst
1 ..  SPDX-License-Identifier: BSD-3-Clause
2     Copyright 2018 The DPDK contributors
3
4 DPDK Release 18.11
5 ==================
6
7 .. **Read this first.**
8
9    The text in the sections below explains how to update the release notes.
10
11    Use proper spelling, capitalization and punctuation in all sections.
12
13    Variable and config names should be quoted as fixed width text:
14    ``LIKE_THIS``.
15
16    Build the docs and view the output file to ensure the changes are correct::
17
18       make doc-guides-html
19
20       xdg-open build/doc/html/guides/rel_notes/release_18_11.html
21
22
23 New Features
24 ------------
25
26 .. This section should contain new features added in this release.
27    Sample format:
28
29    * **Add a title in the past tense with a full stop.**
30
31      Add a short 1-2 sentence description in the past tense.
32      The description should be enough to allow someone scanning
33      the release notes to understand the new feature.
34
35      If the feature adds a lot of sub-features you can use a bullet list
36      like this:
37
38      * Added feature foo to do something.
39      * Enhanced feature bar to do something else.
40
41      Refer to the previous release notes for examples.
42
43      Suggested order in release notes items:
44      * Core libs (EAL, mempool, ring, mbuf, buses)
45      * Device abstraction libs and PMDs
46        - ethdev (lib, PMDs)
47        - cryptodev (lib, PMDs)
48        - eventdev (lib, PMDs)
49        - etc
50      * Other libs
51      * Apps, Examples, Tools (if significative)
52
53      This section is a comment. Do not overwrite or remove it.
54      Also, make sure to start the actual text at the margin.
55      =========================================================
56
57 * **Added support for using externally allocated memory in DPDK.**
58
59   DPDK has gained support for creating new ``rte_malloc`` heaps referencing
60   memory that was created outside of DPDK's own page allocator, and using that
61   memory natively with any other DPDK library or data structure.
62
63 * **Add support to offload more flow match and actions for CXGBE PMD**
64
65   Flow API support has been enhanced for CXGBE Poll Mode Driver to offload:
66
67   * Match items: destination MAC address.
68   * Action items: push/pop/rewrite vlan header.
69
70 * **Added a devarg to use the latest supported vector path in i40e.**
71   A new devarg ``use-latest-supported-vec`` was introduced to allow users to
72   choose the latest vector path that the platform supported. For example, users
73   can use AVX2 vector path on BDW/HSW to get better performance.
74
75 * **Added support for SR-IOV in netvsc PMD.**
76
77   The ``netvsc`` poll mode driver now supports the Accelerated Networking
78   SR-IOV option in Hyper-V and Azure. This is an alternative to the previous
79   vdev_netvsc, tap, and failsafe drivers combination.
80
81 * **Added a new net driver for Marvell Armada 3k device.**
82
83   Added the new ``mvneta`` net driver for Marvell Armada 3k device. See the
84   :doc:`../nics/mvneta` NIC guide for more details on this new driver.
85
86 * **Added NXP ENETC PMD.**
87
88   Added the new enetc driver for NXP enetc platform. See the
89   "ENETC Poll Mode Driver" document for more details on this new driver.
90
91 * **Updated Solarflare network PMD.**
92
93   Updated the sfc_efx driver including the following changes:
94
95   * Added support for Rx scatter in EF10 datapath implementation.
96   * Added support for Rx descriptor status API in EF10 datapath implementation.
97   * Added support for TSO in EF10 datapath implementation.
98   * Added support for Tx descriptor status API in EF10 (ef10 and ef10_simple)
99     datapaths implementation.
100
101 * **Updated failsafe driver.**
102
103   Updated the failsafe driver including the following changes:
104
105   * Support for Rx and Tx queues start and stop.
106   * Support for Rx and Tx queues deferred start.
107   * Support for runtime Rx and Tx queues setup.
108   * Support multicast MAC address set.
109
110 * **Added a devarg to use PCAP interface physical MAC address.**
111   A new devarg ``phy_mac`` was introduced to allow users to use physical
112   MAC address of the selected PCAP interface.
113
114 * **Added Event Ethernet Tx Adapter.**
115
116   Added event ethernet Tx adapter library that  provides configuration and
117   data path APIs for the ethernet transmit stage of an event driven packet
118   processing application. These APIs abstract the implementation of the
119   transmit stage and allow the application to use eventdev PMD support or
120   a common implementation.
121
122 * **Added Distributed Software Eventdev PMD.**
123
124   Added the new Distributed Software Event Device (DSW), which is a
125   pure-software eventdev driver distributing the work of scheduling
126   among all eventdev ports and the lcores using them. DSW, compared to
127   the SW eventdev PMD, sacrifices load balancing performance to
128   gain better event scheduling throughput and scalability.
129
130 * **Added ability to switch queue deferred start flag on testpmd app.**
131
132   Added a console command to testpmd app, giving ability to switch
133   ``rx_deferred_start`` or ``tx_deferred_start`` flag of the specified queue of
134   the specified port. The port must be stopped before the command call in order
135   to reconfigure queues.
136
137 * **Add a new sample for vDPA**
138
139   The vdpa sample application creates vhost-user sockets by using the
140   vDPA backend. vDPA stands for vhost Data Path Acceleration which utilizes
141   virtio ring compatible devices to serve virtio driver directly to enable
142   datapath acceleration. As vDPA driver can help to set up vhost datapath,
143   this application doesn't need to launch dedicated worker threads for vhost
144   enqueue/dequeue operations.
145
146
147 API Changes
148 -----------
149
150 .. This section should contain API changes. Sample format:
151
152    * Add a short 1-2 sentence description of the API change.
153      Use fixed width quotes for ``function_names`` or ``struct_names``.
154      Use the past tense.
155
156    This section is a comment. Do not overwrite or remove it.
157    Also, make sure to start the actual text at the margin.
158    =========================================================
159
160 * eal: ``rte_memseg_list`` structure now has an additional flag indicating
161   whether the memseg list is externally allocated. This will have implications
162   for any users of memseg-walk-related functions, as they will now have to skip
163   externally allocated segments in most cases if the intent is to only iterate
164   over internal DPDK memory.
165   ``socket_id`` parameter across the entire DPDK has gained additional meaning,
166   as some socket ID's will now be representing externally allocated memory. No
167   changes will be required for existing code as backwards compatibility will be
168   kept, and those who do not use this feature will not see these extra socket
169   ID's. Any new API's must not check socket ID parameters themselves, and must
170   instead leave it to the memory subsystem to decide whether socket ID is a
171   valid one.
172
173 * eal: The following devargs functions, which were deprecated in 18.05,
174   were removed in 18.11:
175   ``rte_eal_parse_devargs_str()``, ``rte_eal_devargs_add()``,
176   ``rte_eal_devargs_type_count()``, and ``rte_eal_devargs_dump()``.
177
178 * eal: The parameters of the function ``rte_devargs_remove()`` have changed
179   from bus and device names to ``struct rte_devargs``.
180
181 * mbuf: The ``__rte_mbuf_raw_free()`` and ``__rte_pktmbuf_prefree_seg()``
182   functions were deprecated since 17.05 and are replaced by
183   ``rte_mbuf_raw_free()`` and ``rte_pktmbuf_prefree_seg()``.
184
185 * A new device flag, RTE_ETH_DEV_NOLIVE_MAC_ADDR, changes the order of
186   actions inside rte_eth_dev_start regarding MAC set. Some NICs do not
187   support MAC changes once the port has started and with this new device
188   flag the MAC can be properly configured in any case. This is particularly
189   important for bonding.
190
191 * The default behaviour of CRC strip offload changed. Without any specific Rx
192   offload flag, default behavior by PMD is now to strip CRC.
193   DEV_RX_OFFLOAD_CRC_STRIP offload flag has been removed.
194   To request keeping CRC, application should set ``DEV_RX_OFFLOAD_KEEP_CRC`` Rx
195   offload.
196
197 * eventdev: Type of 2nd parameter to ``rte_event_eth_rx_adapter_caps_get()``
198   has been changed from uint8_t to uint16_t.
199
200
201 ABI Changes
202 -----------
203
204 .. This section should contain ABI changes. Sample format:
205
206    * Add a short 1-2 sentence description of the ABI change
207      that was announced in the previous releases and made in this release.
208      Use fixed width quotes for ``function_names`` or ``struct_names``.
209      Use the past tense.
210
211    This section is a comment. Do not overwrite or remove it.
212    Also, make sure to start the actual text at the margin.
213    =========================================================
214
215 * eal: added ``legacy_mem`` and ``single_file_segments`` values to
216        ``rte_config`` structure on account of improving DPDK usability when
217        using either ``--legacy-mem`` or ``--single-file-segments`` flags.
218
219 * eal: EAL library ABI version was changed due to previously announced work on
220        supporting external memory in DPDK:
221          - structure ``rte_memseg_list`` now has a new field indicating length
222            of memory addressed by the segment list
223          - structure ``rte_memseg_list`` now has a new flag indicating whether
224            the memseg list refers to external memory
225          - structure ``rte_malloc_heap`` now has a new field indicating socket
226            ID the malloc heap belongs to
227          - structure ``rte_mem_config`` has had its ``malloc_heaps`` array
228            resized from ``RTE_MAX_NUMA_NODES`` to ``RTE_MAX_HEAPS`` value
229          - structure ``rte_malloc_heap`` now has a ``heap_name`` member
230          - structure ``rte_eal_memconfig`` has been extended to contain next
231            socket ID for externally allocated segments
232
233 * eal: The structure ``rte_device`` got a new field to reference a ``rte_bus``.
234   It is changing the size of the ``struct rte_device`` and the inherited
235   device structures of all buses.
236
237
238 Removed Items
239 -------------
240
241 .. This section should contain removed items in this release. Sample format:
242
243    * Add a short 1-2 sentence description of the removed item
244      in the past tense.
245
246    This section is a comment. Do not overwrite or remove it.
247    Also, make sure to start the actual text at the margin.
248    =========================================================
249
250
251 Shared Library Versions
252 -----------------------
253
254 .. Update any library version updated in this release
255    and prepend with a ``+`` sign, like this:
256
257      librte_acl.so.2
258    + librte_cfgfile.so.2
259      librte_cmdline.so.2
260
261    This section is a comment. Do not overwrite or remove it.
262    =========================================================
263
264 The libraries prepended with a plus sign were incremented in this version.
265
266 .. code-block:: diff
267
268      librte_acl.so.2
269      librte_bbdev.so.1
270      librte_bitratestats.so.2
271      librte_bpf.so.1
272    + librte_bus_dpaa.so.2
273    + librte_bus_fslmc.so.2
274    + librte_bus_ifpga.so.2
275    + librte_bus_pci.so.2
276    + librte_bus_vdev.so.2
277    + librte_bus_vmbus.so.2
278      librte_cfgfile.so.2
279      librte_cmdline.so.2
280      librte_common_octeontx.so.1
281      librte_compressdev.so.1
282      librte_cryptodev.so.5
283      librte_distributor.so.1
284    + librte_eal.so.9
285      librte_ethdev.so.10
286    + librte_eventdev.so.6
287      librte_flow_classify.so.1
288      librte_gro.so.1
289      librte_gso.so.1
290      librte_hash.so.2
291      librte_ip_frag.so.1
292      librte_jobstats.so.1
293      librte_kni.so.2
294      librte_kvargs.so.1
295      librte_latencystats.so.1
296      librte_lpm.so.2
297      librte_mbuf.so.4
298      librte_mempool.so.5
299      librte_meter.so.2
300      librte_metrics.so.1
301      librte_net.so.1
302      librte_pci.so.1
303      librte_pdump.so.2
304      librte_pipeline.so.3
305      librte_pmd_bnxt.so.2
306      librte_pmd_bond.so.2
307      librte_pmd_i40e.so.2
308      librte_pmd_ixgbe.so.2
309      librte_pmd_dpaa2_cmdif.so.1
310      librte_pmd_dpaa2_qdma.so.1
311      librte_pmd_ring.so.2
312      librte_pmd_softnic.so.1
313      librte_pmd_vhost.so.2
314    + librte_pmd_netvsc.so.1
315      librte_port.so.3
316      librte_power.so.1
317      librte_rawdev.so.1
318      librte_reorder.so.1
319      librte_ring.so.2
320      librte_sched.so.1
321      librte_security.so.1
322      librte_table.so.3
323      librte_timer.so.1
324      librte_vhost.so.3
325
326
327 Known Issues
328 ------------
329
330 .. This section should contain new known issues in this release. Sample format:
331
332    * **Add title in present tense with full stop.**
333
334      Add a short 1-2 sentence description of the known issue
335      in the present tense. Add information on any known workarounds.
336
337    This section is a comment. Do not overwrite or remove it.
338    Also, make sure to start the actual text at the margin.
339    =========================================================
340
341 * When using SR-IOV (VF) support with netvsc PMD and the Mellanox mlx5 bifurcated
342   driver; the Linux netvsc device must be brought up before the netvsc device is
343   unbound and passed to the DPDK.
344
345
346 Tested Platforms
347 ----------------
348
349 .. This section should contain a list of platforms that were tested
350    with this release.
351
352    The format is:
353
354    * <vendor> platform with <vendor> <type of devices> combinations
355
356      * List of CPU
357      * List of OS
358      * List of devices
359      * Other relevant details...
360
361    This section is a comment. Do not overwrite or remove it.
362    Also, make sure to start the actual text at the margin.
363    =========================================================