1 .. SPDX-License-Identifier: BSD-3-Clause
2 Copyright 2019 The DPDK contributors
4 .. include:: <isonum.txt>
9 .. **Read this first.**
11 The text in the sections below explains how to update the release notes.
13 Use proper spelling, capitalization and punctuation in all sections.
15 Variable and config names should be quoted as fixed width text:
18 Build the docs and view the output file to ensure the changes are correct::
22 xdg-open build/doc/html/guides/rel_notes/release_19_11.html
28 .. This section should contain new features added in this release.
31 * **Add a title in the past tense with a full stop.**
33 Add a short 1-2 sentence description in the past tense.
34 The description should be enough to allow someone scanning
35 the release notes to understand the new feature.
37 If the feature adds a lot of sub-features you can use a bullet list
40 * Added feature foo to do something.
41 * Enhanced feature bar to do something else.
43 Refer to the previous release notes for examples.
45 Suggested order in release notes items:
46 * Core libs (EAL, mempool, ring, mbuf, buses)
47 * Device abstraction libs and PMDs
49 - cryptodev (lib, PMDs)
50 - eventdev (lib, PMDs)
53 * Apps, Examples, Tools (if significant)
55 This section is a comment. Do not overwrite or remove it.
56 Also, make sure to start the actual text at the margin.
57 =========================================================
59 * **FreeBSD now supports `--base-virtaddr` EAL option.**
61 FreeBSD version now also supports setting base virtual address for mapping
62 pages and resources into its address space.
64 * **Added Lock-free Stack for aarch64.**
66 The lock-free stack implementation is enabled for aarch64 platforms.
68 * **Changed mempool allocation behaviour.**
70 Objects are no longer across pages by default.
71 It may consume more memory when using small memory pages.
73 * **Added support of dynamic fields and flags in mbuf.**
75 This new feature adds the ability to dynamically register some room
76 for a field or a flag in the mbuf structure. This is typically used
77 for specific offload features, where adding a static field or flag
78 in the mbuf is not justified.
80 * **Added hairpin queue.**
82 On supported NICs, we can now setup haipin queue which will offload packets
83 from the wire, backto the wire.
85 * **Added flow tag in rte_flow.**
87 SET_TAG action and TAG item have been added to support transient flow tag.
89 * **Extended metadata support in rte_flow.**
91 Flow metadata is extended to both Rx and Tx.
93 * Tx metadata can also be set by SET_META action of rte_flow.
94 * Rx metadata is delivered to host via a dynamic field of ``rte_mbuf`` with
97 * **Updated the enic driver.**
99 * Added support for Geneve with options offload.
100 * Added flow API implementation based on VIC Flow Manager API.
102 * **Added Hisilicon hns3 PMD.**
104 Added the new ``hns3`` net driver for the inbuilt Hisilicon Network
105 Subsystem 3(HNS3) network engine found in the Hisilicon Kunpeng 920 SoC.
106 See the :doc:`../nics/hns3` guide for more details on this new driver.
108 * **Added NXP PFE PMD.**
110 Added the new PFE driver for the NXP LS1012A platform. See the
111 :doc:`../nics/pfe` NIC driver guide for more details on this new driver.
113 * **Updated iavf PMD.**
115 Enable AVX2 data path for iavf PMD.
117 * **Updated the Intel e1000 driver.**
119 Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag.
121 * **Updated the Intel ixgbe driver.**
123 Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag.
125 * **Updated the Intel i40e driver.**
127 Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag.
129 * **Updated the Intel fm10k driver.**
131 Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag.
133 * **Added RX/TX packet burst mode get API.**
135 Added two new functions ``rte_eth_rx_burst_mode_get`` and
136 ``rte_eth_tx_burst_mode_get`` that allow an application
137 to retrieve the mode information about RX/TX packet burst
138 such as Scalar or Vector, and Vector technology like AVX2.
140 * **Updated the Intel ice driver.**
142 Updated the Intel ice driver with new features and improvements, including:
144 * Added support for device-specific DDP package loading.
145 * Added support for handling Receive Flex Descriptor.
146 * Added support for protocol extraction on per Rx queue.
147 * Added support for Flow Director filter based on generic filter framework.
148 * Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag.
149 * Generic filter enhancement
150 - Supported pipeline mode.
151 - Supported new packet type like PPPoE for switch filter.
152 * Supported input set change and symmetric hash by rte_flow RSS action.
153 * Added support for GTP Tx checksum offload.
154 * Added new device IDs to support E810_XXV devices.
156 * **Added cryptodev asymmetric session-less operation.**
158 Added session-less option to cryptodev asymmetric structure. It works the same
159 way as symmetric crypto, corresponding xform is used directly by the crypto op.
161 * **Updated the Huawei hinic driver.**
163 Updated the Huawei hinic driver with new features and improvements, including:
165 * Enabled SR-IOV - Partially supported at this point, VFIO only.
166 * Supported VLAN filter and VLAN offload.
167 * Supported Unicast MAC filter and Multicast MAC filter.
168 * Supported Flow API for LACP, VRRP, BGP and so on.
169 * Supported FW version get.
171 * **Updated Mellanox mlx5 driver.**
173 Updated Mellanox mlx5 driver with new features and improvements, including:
175 * Added support for VLAN pop flow offload command.
176 * Added support for VLAN push flow offload command.
177 * Added support for VLAN set PCP offload command.
178 * Added support for VLAN set VID offload command.
179 * Added support for matching on packets withe Geneve tunnel header.
180 * Added hairpin support.
182 * **Updated the AF_XDP PMD.**
184 Updated the AF_XDP PMD. The new features include:
186 * Enabled zero copy between application mempools and UMEM by enabling the
187 XDP_UMEM_UNALIGNED_CHUNKS UMEM flag.
189 * **Added Marvell NITROX symmetric crypto PMD.**
191 Added a symmetric crypto PMD for Marvell NITROX V security processor.
192 See the :doc:`../cryptodevs/nitrox` guide for more details on this new
194 * **Added asymmetric support to Marvell OCTEON TX crypto PMD.**
196 Added support for asymmetric operations in Marvell OCTEON TX cypto PMD.
197 Supports RSA and modexp operations.
199 * **Added Marvell OCTEON TX2 crypto PMD**
201 Added a new PMD driver for h/w crypto offload block on ``OCTEON TX2`` SoC.
203 See :doc:`../cryptodevs/octeontx2` for more details
205 * **Updated NXP crypto PMDs for PDCP support.**
207 PDCP support is added to DPAA_SEC and DPAA2_SEC PMDs using rte_security APIs.
208 Support is added for all sequence number sizes for control and user plane.
209 Test application is updated for unit testing.
211 * **Enabled Single Pass GCM acceleration on QAT GEN3.**
213 Added support for Single Pass GCM, available on QAT GEN3 only (Intel
214 QuickAssist Technology C4xxx). It is automatically chosen instead of the
215 classic 2-pass mode when running on QAT GEN3, significantly improving
216 the performance of AES GCM operations.
218 * **Updated the Intel QuickAssist Technology (QAT) asymmetric crypto PMD.**
220 * Added support for asymmetric session-less operations.
221 * Added support for RSA algorithm with pair (n, d) private key representation.
222 * Added support for RSA algorithm with quintuple private key representation.
224 * **Updated the Intel QuickAssist Technology (QAT) compression PMD.**
226 Added stateful decompression support in the Intel QuickAssist Technology PMD.
227 Please note that stateful compression is not supported.
229 * **Added external buffers support for dpdk-test-compress-perf tool.**
231 Added a command line option to dpdk-test-compress-perf tool to allocate
232 and use memory zones as external buffers instead of keeping the data directly
235 * **Updated the IPSec library.**
237 * Added SA Database API to ``librte_ipsec``. A new test-sad application is also
238 introduced to evaluate and perform custom functional and performance tests
239 for IPsec SAD implementation.
241 * Support fragmented packets in inline crypto processing mode with fallback
242 ``lookaside-none`` session. Corresponding changes are also added in IPsec
243 Security Gateway application.
245 * **Introduced FIFO for NTB PMD.**
247 Introduced FIFO for NTB (Non-transparent Bridge) PMD to support
248 packet based processing.
250 * **Added eBPF JIT support for arm64.**
252 Added eBPF JIT support for arm64 architecture to improve the eBPF program
255 * **Added RIB and FIB (Routing/Forwarding Information Base) libraries.**
257 RIB and FIB can replace the LPM (Longest Prefix Match) library
258 with better control plane (RIB) performance.
259 The data plane (FIB) can be extended with new algorithms.
261 * **Updated testpmd.**
263 * Added a console command to testpmd app, ``show port (port_id) ptypes`` which
264 gives ability to print port supported ptypes in different protocol layers.
266 * **Added new example l2fwd-event application.**
268 Added an example application `l2fwd-event` that adds event device support to
269 traditional l2fwd example. It demonstrates usage of poll and event mode IO
270 mechanism under a single application.
272 * **Added build support for Link Time Optimization.**
274 LTO is an optimization technique used by the compiler to perform whole
275 program analysis and optimization at link time. In order to do that
276 compilers store their internal representation of the source code that
277 the linker uses at the final stage of compilation process.
279 See :doc:`../prog_guide/lto` for more information:
285 .. This section should contain removed items in this release. Sample format:
287 * Add a short 1-2 sentence description of the removed item
290 This section is a comment. Do not overwrite or remove it.
291 Also, make sure to start the actual text at the margin.
292 =========================================================
294 * Removed duplicated set of commands for Rx offload configuration from testpmd::
296 port config all crc-strip|scatter|rx-cksum|rx-timestamp|
297 hw-vlan|hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off
299 The testpmd commands set that can be used instead
300 in order to enable or disable Rx offloading on all Rx queues of a port is::
302 port config <port_id> rx_offload crc_strip|scatter|
303 ipv4_cksum|udp_cksum|tcp_cksum|timestamp|
304 vlan_strip|vlan_filter|vlan_extend on|off
306 * Removed AF_XDP pmd_zero copy vdev argument. Support is now auto-detected.
308 * The following sample applications have been removed in this release:
311 * L3 Forwarding in a Virtualization Environment
313 * Netmap Compatibility
314 * Quota and Watermark
317 * Removed arm64-dpaa2-* build config. arm64-dpaa-* can now build for both
318 dpaa and dpaa2 platforms.
324 .. This section should contain API changes. Sample format:
326 * sample: Add a short 1-2 sentence description of the API change
327 which was announced in the previous releases and made in this release.
328 Start with a scope label like "ethdev:".
329 Use fixed width quotes for ``function_names`` or ``struct_names``.
332 This section is a comment. Do not overwrite or remove it.
333 Also, make sure to start the actual text at the margin.
334 =========================================================
336 * eal: made the ``lcore_config`` struct and global symbol private.
338 * eal: removed the ``rte_cpu_check_supported`` function, replaced by
339 ``rte_cpu_is_supported`` since dpdk v17.08.
341 * eal: removed the ``rte_malloc_virt2phy`` function, replaced by
342 ``rte_malloc_virt2iova`` since v17.11.
344 * eal: made the ``rte_config`` struct and ``rte_eal_get_configuration``
347 * mem: hid the internal ``malloc_heap`` structure and the
348 ``rte_malloc_heap.h`` header.
350 * vfio: removed ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` that have
351 been marked as deprecated in release 19.05.
352 ``rte_vfio_container_dma_map`` and ``rte_vfio_container_dma_unmap`` can
353 be used as substitutes.
355 * pci: removed the following functions deprecated since dpdk v17.11:
357 - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
358 - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
359 - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
361 * The network structure ``esp_tail`` has been prefixed by ``rte_``.
363 * The network definitions of PPPoE ethertypes have been prefixed by ``RTE_``.
365 * The network structure for MPLS has been prefixed by ``rte_``.
367 * ethdev: changed ``rte_eth_dev_infos_get`` return value from ``void`` to
368 ``int`` to provide a way to report various error conditions.
370 * ethdev: changed ``rte_eth_promiscuous_enable`` and
371 ``rte_eth_promiscuous_disable`` return value from ``void`` to ``int`` to
372 provide a way to report various error conditions.
374 * ethdev: changed ``rte_eth_allmulticast_enable`` and
375 ``rte_eth_allmulticast_disable`` return value from ``void`` to ``int`` to
376 provide a way to report various error conditions.
378 * ethdev: changed ``rte_eth_dev_xstats_reset`` return value from ``void`` to
379 ``int`` to provide a way to report various error conditions.
381 * ethdev: changed ``rte_eth_link_get`` and ``rte_eth_link_get_nowait``
382 return value from ``void`` to ``int`` to provide a way to report various
385 * ethdev: changed ``rte_eth_macaddr_get`` return value from ``void`` to
386 ``int`` to provide a way to report various error conditions.
388 * ethdev: changed ``rte_eth_dev_owner_delete`` return value from ``void`` to
389 ``int`` to provide a way to report various error conditions.
391 * ethdev: The deprecated function ``rte_eth_dev_count`` was removed.
392 The function ``rte_eth_dev_count_avail`` is a drop-in replacement.
393 If the intent is to iterate over ports, ``RTE_ETH_FOREACH_*`` macros
394 are better port iterators.
396 * ethdev: RTE_FLOW_ITEM_TYPE_META data endianness altered to host one.
397 Due to the new dynamic metadata field in mbuf is host-endian either, there
398 is the minor compatibility issue for applications in case of 32-bit values
401 * ethdev: the tx_metadata mbuf field is moved to dymanic one.
402 PKT_TX_METADATA flag is replaced with PKT_TX_DYNF_METADATA.
403 DEV_TX_OFFLOAD_MATCH_METADATA offload flag is removed, now metadata
404 support in PMD is engaged on dynamic field registration.
406 * event: The function ``rte_event_eth_tx_adapter_enqueue`` takes an additional
407 input as ``flags``. Flag ``RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST`` which
408 has been introduced in this release is used when used when all the packets
409 enqueued in the tx adapter are destined for the same Ethernet port & Tx queue.
411 * sched: The pipe nodes configuration parameters such as number of pipes,
412 pipe queue sizes, pipe profiles, etc., are moved from port level structure
413 to subport level. This allows different subports of the same port to
414 have different configuration for the pipe nodes.
420 .. This section should contain ABI changes. Sample format:
422 * sample: Add a short 1-2 sentence description of the ABI change
423 which was announced in the previous releases and made in this release.
424 Start with a scope label like "ethdev:".
425 Use fixed width quotes for ``function_names`` or ``struct_names``.
428 This section is a comment. Do not overwrite or remove it.
429 Also, make sure to start the actual text at the margin.
430 =========================================================
432 * net: The Ethernet address and other header definitions have changed
433 attributes. They have been modified to be aligned on 2-byte boundaries.
434 These changes should not impact normal usage because drivers naturally
435 align the Ethernet header on receive and all known encapsulations
436 preserve the alignment of the header.
438 * security: The field ``replay_win_sz`` has been moved from ipsec library
439 based ``rte_ipsec_sa_prm`` structure to security library based structure
440 ``rte_security_ipsec_xform``, which specify the Anti replay window size
441 to enable sequence replay attack handling.
443 * ipsec: The field ``replay_win_sz`` has been removed from the structure
444 ``rte_ipsec_sa_prm`` as it has been added to the security library.
447 Shared Library Versions
448 -----------------------
450 .. Update any library version updated in this release
451 and prepend with a ``+`` sign, like this:
457 This section is a comment. Do not overwrite or remove it.
458 =========================================================
460 The libraries prepended with a plus sign were incremented in this version.
466 librte_bitratestats.so.2
469 librte_bus_fslmc.so.2
470 librte_bus_ifpga.so.2
473 librte_bus_vmbus.so.2
476 librte_compressdev.so.1
477 librte_cryptodev.so.8
478 librte_distributor.so.1
481 + librte_ethdev.so.13
482 + librte_eventdev.so.8
484 librte_flow_classify.so.1
493 librte_latencystats.so.1
507 librte_pmd_ixgbe.so.2
508 librte_pmd_dpaa2_qdma.so.1
510 librte_pmd_softnic.so.1
511 librte_pmd_vhost.so.2
520 + librte_security.so.3
530 .. This section should contain new known issues in this release. Sample format:
532 * **Add title in present tense with full stop.**
534 Add a short 1-2 sentence description of the known issue
535 in the present tense. Add information on any known workarounds.
537 This section is a comment. Do not overwrite or remove it.
538 Also, make sure to start the actual text at the margin.
539 =========================================================
545 .. This section should contain a list of platforms that were tested
550 * <vendor> platform with <vendor> <type of devices> combinations
555 * Other relevant details...
557 This section is a comment. Do not overwrite or remove it.
558 Also, make sure to start the actual text at the margin.
559 =========================================================