drivers/baseband/acc100/rte_acc100_pmd.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2020 Intel Corporation
   3  */
   4
   5 #include <unistd.h>
   6
   7 #include <rte_common.h>
   8 #include <rte_log.h>
   9 #include <rte_dev.h>
  10 #include <rte_malloc.h>
  11 #include <rte_mempool.h>
  12 #include <rte_byteorder.h>
  13 #include <rte_errno.h>
  14 #include <rte_branch_prediction.h>
  15 #include <rte_hexdump.h>
  16 #include <rte_pci.h>
  17 #include <rte_bus_pci.h>
  18 #ifdef RTE_BBDEV_OFFLOAD_COST
  19 #include <rte_cycles.h>
  20 #endif
  21
  22 #include <rte_bbdev.h>
  23 #include <rte_bbdev_pmd.h>
  24 #include "rte_acc100_pmd.h"
  25
  26 #ifdef RTE_LIBRTE_BBDEV_DEBUG
  27 RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, DEBUG);
  28 #else
  29 RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, NOTICE);
  30 #endif
  31
  32 /* Write to MMIO register address */
  33 static inline void
  34 mmio_write(void *addr, uint32_t value)
  35 {
  36         *((volatile uint32_t *)(addr)) = rte_cpu_to_le_32(value);
  37 }
  38
  39 /* Write a register of a ACC100 device */
  40 static inline void
  41 acc100_reg_write(struct acc100_device *d, uint32_t offset, uint32_t value)
  42 {
  43         void *reg_addr = RTE_PTR_ADD(d->mmio_base, offset);
  44         mmio_write(reg_addr, value);
  45         usleep(ACC100_LONG_WAIT);
  46 }
  47
  48 /* Read a register of a ACC100 device */
  49 static inline uint32_t
  50 acc100_reg_read(struct acc100_device *d, uint32_t offset)
  51 {
  52
  53         void *reg_addr = RTE_PTR_ADD(d->mmio_base, offset);
  54         uint32_t ret = *((volatile uint32_t *)(reg_addr));
  55         return rte_le_to_cpu_32(ret);
  56 }
  57
  58 /* Basic Implementation of Log2 for exact 2^N */
  59 static inline uint32_t
  60 log2_basic(uint32_t value)
  61 {
  62         return (value == 0) ? 0 : rte_bsf32(value);
  63 }
  64
  65 /* Calculate memory alignment offset assuming alignment is 2^N */
  66 static inline uint32_t
  67 calc_mem_alignment_offset(void *unaligned_virt_mem, uint32_t alignment)
  68 {
  69         rte_iova_t unaligned_phy_mem = rte_malloc_virt2iova(unaligned_virt_mem);
  70         return (uint32_t)(alignment -
  71                         (unaligned_phy_mem & (alignment-1)));
  72 }
  73
  74 /* Calculate the offset of the enqueue register */
  75 static inline uint32_t
  76 queue_offset(bool pf_device, uint8_t vf_id, uint8_t qgrp_id, uint16_t aq_id)
  77 {
  78         if (pf_device)
  79                 return ((vf_id << 12) + (qgrp_id << 7) + (aq_id << 3) +
  80                                 HWPfQmgrIngressAq);
  81         else
  82                 return ((qgrp_id << 7) + (aq_id << 3) +
  83                                 HWVfQmgrIngressAq);
  84 }
  85
  86 enum {UL_4G = 0, UL_5G, DL_4G, DL_5G, NUM_ACC};
  87
  88 /* Return the accelerator enum for a Queue Group Index */
  89 static inline int
  90 accFromQgid(int qg_idx, const struct rte_acc100_conf *acc100_conf)
  91 {
  92         int accQg[ACC100_NUM_QGRPS];
  93         int NumQGroupsPerFn[NUM_ACC];
  94         int acc, qgIdx, qgIndex = 0;
  95         for (qgIdx = 0; qgIdx < ACC100_NUM_QGRPS; qgIdx++)
  96                 accQg[qgIdx] = 0;
  97         NumQGroupsPerFn[UL_4G] = acc100_conf->q_ul_4g.num_qgroups;
  98         NumQGroupsPerFn[UL_5G] = acc100_conf->q_ul_5g.num_qgroups;
  99         NumQGroupsPerFn[DL_4G] = acc100_conf->q_dl_4g.num_qgroups;
 100         NumQGroupsPerFn[DL_5G] = acc100_conf->q_dl_5g.num_qgroups;
 101         for (acc = UL_4G;  acc < NUM_ACC; acc++)
 102                 for (qgIdx = 0; qgIdx < NumQGroupsPerFn[acc]; qgIdx++)
 103                         accQg[qgIndex++] = acc;
 104         acc = accQg[qg_idx];
 105         return acc;
 106 }
 107
 108 /* Return the queue topology for a Queue Group Index */
 109 static inline void
 110 qtopFromAcc(struct rte_acc100_queue_topology **qtop, int acc_enum,
 111                 struct rte_acc100_conf *acc100_conf)
 112 {
 113         struct rte_acc100_queue_topology *p_qtop;
 114         p_qtop = NULL;
 115         switch (acc_enum) {
 116         case UL_4G:
 117                 p_qtop = &(acc100_conf->q_ul_4g);
 118                 break;
 119         case UL_5G:
 120                 p_qtop = &(acc100_conf->q_ul_5g);
 121                 break;
 122         case DL_4G:
 123                 p_qtop = &(acc100_conf->q_dl_4g);
 124                 break;
 125         case DL_5G:
 126                 p_qtop = &(acc100_conf->q_dl_5g);
 127                 break;
 128         default:
 129                 /* NOTREACHED */
 130                 rte_bbdev_log(ERR, "Unexpected error evaluating qtopFromAcc");
 131                 break;
 132         }
 133         *qtop = p_qtop;
 134 }
 135
 136 /* Return the AQ depth for a Queue Group Index */
 137 static inline int
 138 aqDepth(int qg_idx, struct rte_acc100_conf *acc100_conf)
 139 {
 140         struct rte_acc100_queue_topology *q_top = NULL;
 141         int acc_enum = accFromQgid(qg_idx, acc100_conf);
 142         qtopFromAcc(&q_top, acc_enum, acc100_conf);
 143         if (unlikely(q_top == NULL))
 144                 return 0;
 145         return q_top->aq_depth_log2;
 146 }
 147
 148 /* Return the AQ depth for a Queue Group Index */
 149 static inline int
 150 aqNum(int qg_idx, struct rte_acc100_conf *acc100_conf)
 151 {
 152         struct rte_acc100_queue_topology *q_top = NULL;
 153         int acc_enum = accFromQgid(qg_idx, acc100_conf);
 154         qtopFromAcc(&q_top, acc_enum, acc100_conf);
 155         if (unlikely(q_top == NULL))
 156                 return 0;
 157         return q_top->num_aqs_per_groups;
 158 }
 159
 160 static void
 161 initQTop(struct rte_acc100_conf *acc100_conf)
 162 {
 163         acc100_conf->q_ul_4g.num_aqs_per_groups = 0;
 164         acc100_conf->q_ul_4g.num_qgroups = 0;
 165         acc100_conf->q_ul_4g.first_qgroup_index = -1;
 166         acc100_conf->q_ul_5g.num_aqs_per_groups = 0;
 167         acc100_conf->q_ul_5g.num_qgroups = 0;
 168         acc100_conf->q_ul_5g.first_qgroup_index = -1;
 169         acc100_conf->q_dl_4g.num_aqs_per_groups = 0;
 170         acc100_conf->q_dl_4g.num_qgroups = 0;
 171         acc100_conf->q_dl_4g.first_qgroup_index = -1;
 172         acc100_conf->q_dl_5g.num_aqs_per_groups = 0;
 173         acc100_conf->q_dl_5g.num_qgroups = 0;
 174         acc100_conf->q_dl_5g.first_qgroup_index = -1;
 175 }
 176
 177 static inline void
 178 updateQtop(uint8_t acc, uint8_t qg, struct rte_acc100_conf *acc100_conf,
 179                 struct acc100_device *d) {
 180         uint32_t reg;
 181         struct rte_acc100_queue_topology *q_top = NULL;
 182         qtopFromAcc(&q_top, acc, acc100_conf);
 183         if (unlikely(q_top == NULL))
 184                 return;
 185         uint16_t aq;
 186         q_top->num_qgroups++;
 187         if (q_top->first_qgroup_index == -1) {
 188                 q_top->first_qgroup_index = qg;
 189                 /* Can be optimized to assume all are enabled by default */
 190                 reg = acc100_reg_read(d, queue_offset(d->pf_device,
 191                                 0, qg, ACC100_NUM_AQS - 1));
 192                 if (reg & ACC100_QUEUE_ENABLE) {
 193                         q_top->num_aqs_per_groups = ACC100_NUM_AQS;
 194                         return;
 195                 }
 196                 q_top->num_aqs_per_groups = 0;
 197                 for (aq = 0; aq < ACC100_NUM_AQS; aq++) {
 198                         reg = acc100_reg_read(d, queue_offset(d->pf_device,
 199                                         0, qg, aq));
 200                         if (reg & ACC100_QUEUE_ENABLE)
 201                                 q_top->num_aqs_per_groups++;
 202                 }
 203         }
 204 }
 205
 206 /* Fetch configuration enabled for the PF/VF using MMIO Read (slow) */
 207 static inline void
 208 fetch_acc100_config(struct rte_bbdev *dev)
 209 {
 210         struct acc100_device *d = dev->data->dev_private;
 211         struct rte_acc100_conf *acc100_conf = &d->acc100_conf;
 212         const struct acc100_registry_addr *reg_addr;
 213         uint8_t acc, qg;
 214         uint32_t reg, reg_aq, reg_len0, reg_len1;
 215         uint32_t reg_mode;
 216
 217         /* No need to retrieve the configuration is already done */
 218         if (d->configured)
 219                 return;
 220
 221         /* Choose correct registry addresses for the device type */
 222         if (d->pf_device)
 223                 reg_addr = &pf_reg_addr;
 224         else
 225                 reg_addr = &vf_reg_addr;
 226
 227         d->ddr_size = (1 + acc100_reg_read(d, reg_addr->ddr_range)) << 10;
 228
 229         /* Single VF Bundle by VF */
 230         acc100_conf->num_vf_bundles = 1;
 231         initQTop(acc100_conf);
 232
 233         struct rte_acc100_queue_topology *q_top = NULL;
 234         int qman_func_id[ACC100_NUM_ACCS] = {ACC100_ACCMAP_0, ACC100_ACCMAP_1,
 235                         ACC100_ACCMAP_2, ACC100_ACCMAP_3, ACC100_ACCMAP_4};
 236         reg = acc100_reg_read(d, reg_addr->qman_group_func);
 237         for (qg = 0; qg < ACC100_NUM_QGRPS_PER_WORD; qg++) {
 238                 reg_aq = acc100_reg_read(d,
 239                                 queue_offset(d->pf_device, 0, qg, 0));
 240                 if (reg_aq & ACC100_QUEUE_ENABLE) {
 241                         uint32_t idx = (reg >> (qg * 4)) & 0x7;
 242                         if (idx < ACC100_NUM_ACCS) {
 243                                 acc = qman_func_id[idx];
 244                                 updateQtop(acc, qg, acc100_conf, d);
 245                         }
 246                 }
 247         }
 248
 249         /* Check the depth of the AQs*/
 250         reg_len0 = acc100_reg_read(d, reg_addr->depth_log0_offset);
 251         reg_len1 = acc100_reg_read(d, reg_addr->depth_log1_offset);
 252         for (acc = 0; acc < NUM_ACC; acc++) {
 253                 qtopFromAcc(&q_top, acc, acc100_conf);
 254                 if (q_top->first_qgroup_index < ACC100_NUM_QGRPS_PER_WORD)
 255                         q_top->aq_depth_log2 = (reg_len0 >>
 256                                         (q_top->first_qgroup_index * 4))
 257                                         & 0xF;
 258                 else
 259                         q_top->aq_depth_log2 = (reg_len1 >>
 260                                         ((q_top->first_qgroup_index -
 261                                         ACC100_NUM_QGRPS_PER_WORD) * 4))
 262                                         & 0xF;
 263         }
 264
 265         /* Read PF mode */
 266         if (d->pf_device) {
 267                 reg_mode = acc100_reg_read(d, HWPfHiPfMode);
 268                 acc100_conf->pf_mode_en = (reg_mode == ACC100_PF_VAL) ? 1 : 0;
 269         }
 270
 271         rte_bbdev_log_debug(
 272                         "%s Config LLR SIGN IN/OUT %s %s QG %u %u %u %u AQ %u %u %u %u Len %u %u %u %u\n",
 273                         (d->pf_device) ? "PF" : "VF",
 274                         (acc100_conf->input_pos_llr_1_bit) ? "POS" : "NEG",
 275                         (acc100_conf->output_pos_llr_1_bit) ? "POS" : "NEG",
 276                         acc100_conf->q_ul_4g.num_qgroups,
 277                         acc100_conf->q_dl_4g.num_qgroups,
 278                         acc100_conf->q_ul_5g.num_qgroups,
 279                         acc100_conf->q_dl_5g.num_qgroups,
 280                         acc100_conf->q_ul_4g.num_aqs_per_groups,
 281                         acc100_conf->q_dl_4g.num_aqs_per_groups,
 282                         acc100_conf->q_ul_5g.num_aqs_per_groups,
 283                         acc100_conf->q_dl_5g.num_aqs_per_groups,
 284                         acc100_conf->q_ul_4g.aq_depth_log2,
 285                         acc100_conf->q_dl_4g.aq_depth_log2,
 286                         acc100_conf->q_ul_5g.aq_depth_log2,
 287                         acc100_conf->q_dl_5g.aq_depth_log2);
 288 }
 289
 290 static void
 291 free_base_addresses(void **base_addrs, int size)
 292 {
 293         int i;
 294         for (i = 0; i < size; i++)
 295                 rte_free(base_addrs[i]);
 296 }
 297
 298 static inline uint32_t
 299 get_desc_len(void)
 300 {
 301         return sizeof(union acc100_dma_desc);
 302 }
 303
 304 /* Allocate the 2 * 64MB block for the sw rings */
 305 static int
 306 alloc_2x64mb_sw_rings_mem(struct rte_bbdev *dev, struct acc100_device *d,
 307                 int socket)
 308 {
 309         uint32_t sw_ring_size = ACC100_SIZE_64MBYTE;
 310         d->sw_rings_base = rte_zmalloc_socket(dev->device->driver->name,
 311                         2 * sw_ring_size, RTE_CACHE_LINE_SIZE, socket);
 312         if (d->sw_rings_base == NULL) {
 313                 rte_bbdev_log(ERR, "Failed to allocate memory for %s:%u",
 314                                 dev->device->driver->name,
 315                                 dev->data->dev_id);
 316                 return -ENOMEM;
 317         }
 318         uint32_t next_64mb_align_offset = calc_mem_alignment_offset(
 319                         d->sw_rings_base, ACC100_SIZE_64MBYTE);
 320         d->sw_rings = RTE_PTR_ADD(d->sw_rings_base, next_64mb_align_offset);
 321         d->sw_rings_iova = rte_malloc_virt2iova(d->sw_rings_base) +
 322                         next_64mb_align_offset;
 323         d->sw_ring_size = ACC100_MAX_QUEUE_DEPTH * get_desc_len();
 324         d->sw_ring_max_depth = ACC100_MAX_QUEUE_DEPTH;
 325
 326         return 0;
 327 }
 328
 329 /* Attempt to allocate minimised memory space for sw rings */
 330 static void
 331 alloc_sw_rings_min_mem(struct rte_bbdev *dev, struct acc100_device *d,
 332                 uint16_t num_queues, int socket)
 333 {
 334         rte_iova_t sw_rings_base_iova, next_64mb_align_addr_iova;
 335         uint32_t next_64mb_align_offset;
 336         rte_iova_t sw_ring_iova_end_addr;
 337         void *base_addrs[ACC100_SW_RING_MEM_ALLOC_ATTEMPTS];
 338         void *sw_rings_base;
 339         int i = 0;
 340         uint32_t q_sw_ring_size = ACC100_MAX_QUEUE_DEPTH * get_desc_len();
 341         uint32_t dev_sw_ring_size = q_sw_ring_size * num_queues;
 342
 343         /* Find an aligned block of memory to store sw rings */
 344         while (i < ACC100_SW_RING_MEM_ALLOC_ATTEMPTS) {
 345                 /*
 346                  * sw_ring allocated memory is guaranteed to be aligned to
 347                  * q_sw_ring_size at the condition that the requested size is
 348                  * less than the page size
 349                  */
 350                 sw_rings_base = rte_zmalloc_socket(
 351                                 dev->device->driver->name,
 352                                 dev_sw_ring_size, q_sw_ring_size, socket);
 353
 354                 if (sw_rings_base == NULL) {
 355                         rte_bbdev_log(ERR,
 356                                         "Failed to allocate memory for %s:%u",
 357                                         dev->device->driver->name,
 358                                         dev->data->dev_id);
 359                         break;
 360                 }
 361
 362                 sw_rings_base_iova = rte_malloc_virt2iova(sw_rings_base);
 363                 next_64mb_align_offset = calc_mem_alignment_offset(
 364                                 sw_rings_base, ACC100_SIZE_64MBYTE);
 365                 next_64mb_align_addr_iova = sw_rings_base_iova +
 366                                 next_64mb_align_offset;
 367                 sw_ring_iova_end_addr = sw_rings_base_iova + dev_sw_ring_size;
 368
 369                 /* Check if the end of the sw ring memory block is before the
 370                  * start of next 64MB aligned mem address
 371                  */
 372                 if (sw_ring_iova_end_addr < next_64mb_align_addr_iova) {
 373                         d->sw_rings_iova = sw_rings_base_iova;
 374                         d->sw_rings = sw_rings_base;
 375                         d->sw_rings_base = sw_rings_base;
 376                         d->sw_ring_size = q_sw_ring_size;
 377                         d->sw_ring_max_depth = ACC100_MAX_QUEUE_DEPTH;
 378                         break;
 379                 }
 380                 /* Store the address of the unaligned mem block */
 381                 base_addrs[i] = sw_rings_base;
 382                 i++;
 383         }
 384
 385         /* Free all unaligned blocks of mem allocated in the loop */
 386         free_base_addresses(base_addrs, i);
 387 }
 388
 389 /*
 390  * Find queue_id of a device queue based on details from the Info Ring.
 391  * If a queue isn't found UINT16_MAX is returned.
 392  */
 393 static inline uint16_t
 394 get_queue_id_from_ring_info(struct rte_bbdev_data *data,
 395                 const union acc100_info_ring_data ring_data)
 396 {
 397         uint16_t queue_id;
 398
 399         for (queue_id = 0; queue_id < data->num_queues; ++queue_id) {
 400                 struct acc100_queue *acc100_q =
 401                                 data->queues[queue_id].queue_private;
 402                 if (acc100_q != NULL && acc100_q->aq_id == ring_data.aq_id &&
 403                                 acc100_q->qgrp_id == ring_data.qg_id &&
 404                                 acc100_q->vf_id == ring_data.vf_id)
 405                         return queue_id;
 406         }
 407
 408         return UINT16_MAX;
 409 }
 410
 411 /* Checks PF Info Ring to find the interrupt cause and handles it accordingly */
 412 static inline void
 413 acc100_check_ir(struct acc100_device *acc100_dev)
 414 {
 415         volatile union acc100_info_ring_data *ring_data;
 416         uint16_t info_ring_head = acc100_dev->info_ring_head;
 417         if (acc100_dev->info_ring == NULL)
 418                 return;
 419
 420         ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head &
 421                         ACC100_INFO_RING_MASK);
 422
 423         while (ring_data->valid) {
 424                 if ((ring_data->int_nb < ACC100_PF_INT_DMA_DL_DESC_IRQ) || (
 425                                 ring_data->int_nb >
 426                                 ACC100_PF_INT_DMA_DL5G_DESC_IRQ))
 427                         rte_bbdev_log(WARNING, "InfoRing: ITR:%d Info:0x%x",
 428                                 ring_data->int_nb, ring_data->detailed_info);
 429                 /* Initialize Info Ring entry and move forward */
 430                 ring_data->val = 0;
 431                 info_ring_head++;
 432                 ring_data = acc100_dev->info_ring +
 433                                 (info_ring_head & ACC100_INFO_RING_MASK);
 434         }
 435 }
 436
 437 /* Checks PF Info Ring to find the interrupt cause and handles it accordingly */
 438 static inline void
 439 acc100_pf_interrupt_handler(struct rte_bbdev *dev)
 440 {
 441         struct acc100_device *acc100_dev = dev->data->dev_private;
 442         volatile union acc100_info_ring_data *ring_data;
 443         struct acc100_deq_intr_details deq_intr_det;
 444
 445         ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head &
 446                         ACC100_INFO_RING_MASK);
 447
 448         while (ring_data->valid) {
 449
 450                 rte_bbdev_log_debug(
 451                                 "ACC100 PF Interrupt received, Info Ring data: 0x%x",
 452                                 ring_data->val);
 453
 454                 switch (ring_data->int_nb) {
 455                 case ACC100_PF_INT_DMA_DL_DESC_IRQ:
 456                 case ACC100_PF_INT_DMA_UL_DESC_IRQ:
 457                 case ACC100_PF_INT_DMA_UL5G_DESC_IRQ:
 458                 case ACC100_PF_INT_DMA_DL5G_DESC_IRQ:
 459                         deq_intr_det.queue_id = get_queue_id_from_ring_info(
 460                                         dev->data, *ring_data);
 461                         if (deq_intr_det.queue_id == UINT16_MAX) {
 462                                 rte_bbdev_log(ERR,
 463                                                 "Couldn't find queue: aq_id: %u, qg_id: %u, vf_id: %u",
 464                                                 ring_data->aq_id,
 465                                                 ring_data->qg_id,
 466                                                 ring_data->vf_id);
 467                                 return;
 468                         }
 469                         rte_bbdev_pmd_callback_process(dev,
 470                                         RTE_BBDEV_EVENT_DEQUEUE, &deq_intr_det);
 471                         break;
 472                 default:
 473                         rte_bbdev_pmd_callback_process(dev,
 474                                         RTE_BBDEV_EVENT_ERROR, NULL);
 475                         break;
 476                 }
 477
 478                 /* Initialize Info Ring entry and move forward */
 479                 ring_data->val = 0;
 480                 ++acc100_dev->info_ring_head;
 481                 ring_data = acc100_dev->info_ring +
 482                                 (acc100_dev->info_ring_head &
 483                                 ACC100_INFO_RING_MASK);
 484         }
 485 }
 486
 487 /* Checks VF Info Ring to find the interrupt cause and handles it accordingly */
 488 static inline void
 489 acc100_vf_interrupt_handler(struct rte_bbdev *dev)
 490 {
 491         struct acc100_device *acc100_dev = dev->data->dev_private;
 492         volatile union acc100_info_ring_data *ring_data;
 493         struct acc100_deq_intr_details deq_intr_det;
 494
 495         ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head &
 496                         ACC100_INFO_RING_MASK);
 497
 498         while (ring_data->valid) {
 499
 500                 rte_bbdev_log_debug(
 501                                 "ACC100 VF Interrupt received, Info Ring data: 0x%x",
 502                                 ring_data->val);
 503
 504                 switch (ring_data->int_nb) {
 505                 case ACC100_VF_INT_DMA_DL_DESC_IRQ:
 506                 case ACC100_VF_INT_DMA_UL_DESC_IRQ:
 507                 case ACC100_VF_INT_DMA_UL5G_DESC_IRQ:
 508                 case ACC100_VF_INT_DMA_DL5G_DESC_IRQ:
 509                         /* VFs are not aware of their vf_id - it's set to 0 in
 510                          * queue structures.
 511                          */
 512                         ring_data->vf_id = 0;
 513                         deq_intr_det.queue_id = get_queue_id_from_ring_info(
 514                                         dev->data, *ring_data);
 515                         if (deq_intr_det.queue_id == UINT16_MAX) {
 516                                 rte_bbdev_log(ERR,
 517                                                 "Couldn't find queue: aq_id: %u, qg_id: %u",
 518                                                 ring_data->aq_id,
 519                                                 ring_data->qg_id);
 520                                 return;
 521                         }
 522                         rte_bbdev_pmd_callback_process(dev,
 523                                         RTE_BBDEV_EVENT_DEQUEUE, &deq_intr_det);
 524                         break;
 525                 default:
 526                         rte_bbdev_pmd_callback_process(dev,
 527                                         RTE_BBDEV_EVENT_ERROR, NULL);
 528                         break;
 529                 }
 530
 531                 /* Initialize Info Ring entry and move forward */
 532                 ring_data->valid = 0;
 533                 ++acc100_dev->info_ring_head;
 534                 ring_data = acc100_dev->info_ring + (acc100_dev->info_ring_head
 535                                 & ACC100_INFO_RING_MASK);
 536         }
 537 }
 538
 539 /* Interrupt handler triggered by ACC100 dev for handling specific interrupt */
 540 static void
 541 acc100_dev_interrupt_handler(void *cb_arg)
 542 {
 543         struct rte_bbdev *dev = cb_arg;
 544         struct acc100_device *acc100_dev = dev->data->dev_private;
 545
 546         /* Read info ring */
 547         if (acc100_dev->pf_device)
 548                 acc100_pf_interrupt_handler(dev);
 549         else
 550                 acc100_vf_interrupt_handler(dev);
 551 }
 552
 553 /* Allocate and setup inforing */
 554 static int
 555 allocate_info_ring(struct rte_bbdev *dev)
 556 {
 557         struct acc100_device *d = dev->data->dev_private;
 558         const struct acc100_registry_addr *reg_addr;
 559         rte_iova_t info_ring_iova;
 560         uint32_t phys_low, phys_high;
 561
 562         if (d->info_ring != NULL)
 563                 return 0; /* Already configured */
 564
 565         /* Choose correct registry addresses for the device type */
 566         if (d->pf_device)
 567                 reg_addr = &pf_reg_addr;
 568         else
 569                 reg_addr = &vf_reg_addr;
 570         /* Allocate InfoRing */
 571         d->info_ring = rte_zmalloc_socket("Info Ring",
 572                         ACC100_INFO_RING_NUM_ENTRIES *
 573                         sizeof(*d->info_ring), RTE_CACHE_LINE_SIZE,
 574                         dev->data->socket_id);
 575         if (d->info_ring == NULL) {
 576                 rte_bbdev_log(ERR,
 577                                 "Failed to allocate Info Ring for %s:%u",
 578                                 dev->device->driver->name,
 579                                 dev->data->dev_id);
 580                 return -ENOMEM;
 581         }
 582         info_ring_iova = rte_malloc_virt2iova(d->info_ring);
 583
 584         /* Setup Info Ring */
 585         phys_high = (uint32_t)(info_ring_iova >> 32);
 586         phys_low  = (uint32_t)(info_ring_iova);
 587         acc100_reg_write(d, reg_addr->info_ring_hi, phys_high);
 588         acc100_reg_write(d, reg_addr->info_ring_lo, phys_low);
 589         acc100_reg_write(d, reg_addr->info_ring_en, ACC100_REG_IRQ_EN_ALL);
 590         d->info_ring_head = (acc100_reg_read(d, reg_addr->info_ring_ptr) &
 591                         0xFFF) / sizeof(union acc100_info_ring_data);
 592         return 0;
 593 }
 594
 595
 596 /* Allocate 64MB memory used for all software rings */
 597 static int
 598 acc100_setup_queues(struct rte_bbdev *dev, uint16_t num_queues, int socket_id)
 599 {
 600         uint32_t phys_low, phys_high, value;
 601         struct acc100_device *d = dev->data->dev_private;
 602         const struct acc100_registry_addr *reg_addr;
 603         int ret;
 604
 605         if (d->pf_device && !d->acc100_conf.pf_mode_en) {
 606                 rte_bbdev_log(NOTICE,
 607                                 "%s has PF mode disabled. This PF can't be used.",
 608                                 dev->data->name);
 609                 return -ENODEV;
 610         }
 611
 612         alloc_sw_rings_min_mem(dev, d, num_queues, socket_id);
 613
 614         /* If minimal memory space approach failed, then allocate
 615          * the 2 * 64MB block for the sw rings
 616          */
 617         if (d->sw_rings == NULL)
 618                 alloc_2x64mb_sw_rings_mem(dev, d, socket_id);
 619
 620         if (d->sw_rings == NULL) {
 621                 rte_bbdev_log(NOTICE,
 622                                 "Failure allocating sw_rings memory");
 623                 return -ENODEV;
 624         }
 625
 626         /* Configure ACC100 with the base address for DMA descriptor rings
 627          * Same descriptor rings used for UL and DL DMA Engines
 628          * Note : Assuming only VF0 bundle is used for PF mode
 629          */
 630         phys_high = (uint32_t)(d->sw_rings_iova >> 32);
 631         phys_low  = (uint32_t)(d->sw_rings_iova & ~(ACC100_SIZE_64MBYTE-1));
 632
 633         /* Choose correct registry addresses for the device type */
 634         if (d->pf_device)
 635                 reg_addr = &pf_reg_addr;
 636         else
 637                 reg_addr = &vf_reg_addr;
 638
 639         /* Read the populated cfg from ACC100 registers */
 640         fetch_acc100_config(dev);
 641
 642         /* Release AXI from PF */
 643         if (d->pf_device)
 644                 acc100_reg_write(d, HWPfDmaAxiControl, 1);
 645
 646         acc100_reg_write(d, reg_addr->dma_ring_ul5g_hi, phys_high);
 647         acc100_reg_write(d, reg_addr->dma_ring_ul5g_lo, phys_low);
 648         acc100_reg_write(d, reg_addr->dma_ring_dl5g_hi, phys_high);
 649         acc100_reg_write(d, reg_addr->dma_ring_dl5g_lo, phys_low);
 650         acc100_reg_write(d, reg_addr->dma_ring_ul4g_hi, phys_high);
 651         acc100_reg_write(d, reg_addr->dma_ring_ul4g_lo, phys_low);
 652         acc100_reg_write(d, reg_addr->dma_ring_dl4g_hi, phys_high);
 653         acc100_reg_write(d, reg_addr->dma_ring_dl4g_lo, phys_low);
 654
 655         /*
 656          * Configure Ring Size to the max queue ring size
 657          * (used for wrapping purpose)
 658          */
 659         value = log2_basic(d->sw_ring_size / 64);
 660         acc100_reg_write(d, reg_addr->ring_size, value);
 661
 662         /* Configure tail pointer for use when SDONE enabled */
 663         d->tail_ptrs = rte_zmalloc_socket(
 664                         dev->device->driver->name,
 665                         ACC100_NUM_QGRPS * ACC100_NUM_AQS * sizeof(uint32_t),
 666                         RTE_CACHE_LINE_SIZE, socket_id);
 667         if (d->tail_ptrs == NULL) {
 668                 rte_bbdev_log(ERR, "Failed to allocate tail ptr for %s:%u",
 669                                 dev->device->driver->name,
 670                                 dev->data->dev_id);
 671                 rte_free(d->sw_rings);
 672                 return -ENOMEM;
 673         }
 674         d->tail_ptr_iova = rte_malloc_virt2iova(d->tail_ptrs);
 675
 676         phys_high = (uint32_t)(d->tail_ptr_iova >> 32);
 677         phys_low  = (uint32_t)(d->tail_ptr_iova);
 678         acc100_reg_write(d, reg_addr->tail_ptrs_ul5g_hi, phys_high);
 679         acc100_reg_write(d, reg_addr->tail_ptrs_ul5g_lo, phys_low);
 680         acc100_reg_write(d, reg_addr->tail_ptrs_dl5g_hi, phys_high);
 681         acc100_reg_write(d, reg_addr->tail_ptrs_dl5g_lo, phys_low);
 682         acc100_reg_write(d, reg_addr->tail_ptrs_ul4g_hi, phys_high);
 683         acc100_reg_write(d, reg_addr->tail_ptrs_ul4g_lo, phys_low);
 684         acc100_reg_write(d, reg_addr->tail_ptrs_dl4g_hi, phys_high);
 685         acc100_reg_write(d, reg_addr->tail_ptrs_dl4g_lo, phys_low);
 686
 687         ret = allocate_info_ring(dev);
 688         if (ret < 0) {
 689                 rte_bbdev_log(ERR, "Failed to allocate info_ring for %s:%u",
 690                                 dev->device->driver->name,
 691                                 dev->data->dev_id);
 692                 /* Continue */
 693         }
 694
 695         d->harq_layout = rte_zmalloc_socket("HARQ Layout",
 696                         ACC100_HARQ_LAYOUT * sizeof(*d->harq_layout),
 697                         RTE_CACHE_LINE_SIZE, dev->data->socket_id);
 698         if (d->harq_layout == NULL) {
 699                 rte_bbdev_log(ERR, "Failed to allocate harq_layout for %s:%u",
 700                                 dev->device->driver->name,
 701                                 dev->data->dev_id);
 702                 rte_free(d->sw_rings);
 703                 return -ENOMEM;
 704         }
 705
 706         /* Mark as configured properly */
 707         d->configured = true;
 708
 709         rte_bbdev_log_debug(
 710                         "ACC100 (%s) configured  sw_rings = %p, sw_rings_iova = %#"
 711                         PRIx64, dev->data->name, d->sw_rings, d->sw_rings_iova);
 712
 713         return 0;
 714 }
 715
 716 static int
 717 acc100_intr_enable(struct rte_bbdev *dev)
 718 {
 719         int ret;
 720         struct acc100_device *d = dev->data->dev_private;
 721
 722         /* Only MSI are currently supported */
 723         if (dev->intr_handle->type == RTE_INTR_HANDLE_VFIO_MSI ||
 724                         dev->intr_handle->type == RTE_INTR_HANDLE_UIO) {
 725
 726                 ret = allocate_info_ring(dev);
 727                 if (ret < 0) {
 728                         rte_bbdev_log(ERR,
 729                                         "Couldn't allocate info ring for device: %s",
 730                                         dev->data->name);
 731                         return ret;
 732                 }
 733
 734                 ret = rte_intr_enable(dev->intr_handle);
 735                 if (ret < 0) {
 736                         rte_bbdev_log(ERR,
 737                                         "Couldn't enable interrupts for device: %s",
 738                                         dev->data->name);
 739                         rte_free(d->info_ring);
 740                         return ret;
 741                 }
 742                 ret = rte_intr_callback_register(dev->intr_handle,
 743                                 acc100_dev_interrupt_handler, dev);
 744                 if (ret < 0) {
 745                         rte_bbdev_log(ERR,
 746                                         "Couldn't register interrupt callback for device: %s",
 747                                         dev->data->name);
 748                         rte_free(d->info_ring);
 749                         return ret;
 750                 }
 751
 752                 return 0;
 753         }
 754
 755         rte_bbdev_log(ERR, "ACC100 (%s) supports only VFIO MSI interrupts",
 756                         dev->data->name);
 757         return -ENOTSUP;
 758 }
 759
 760 /* Free memory used for software rings */
 761 static int
 762 acc100_dev_close(struct rte_bbdev *dev)
 763 {
 764         struct acc100_device *d = dev->data->dev_private;
 765         acc100_check_ir(d);
 766         if (d->sw_rings_base != NULL) {
 767                 rte_free(d->tail_ptrs);
 768                 rte_free(d->info_ring);
 769                 rte_free(d->sw_rings_base);
 770                 d->sw_rings_base = NULL;
 771         }
 772         /* Ensure all in flight HW transactions are completed */
 773         usleep(ACC100_LONG_WAIT);
 774         return 0;
 775 }
 776
 777 /**
 778  * Report a ACC100 queue index which is free
 779  * Return 0 to 16k for a valid queue_idx or -1 when no queue is available
 780  * Note : Only supporting VF0 Bundle for PF mode
 781  */
 782 static int
 783 acc100_find_free_queue_idx(struct rte_bbdev *dev,
 784                 const struct rte_bbdev_queue_conf *conf)
 785 {
 786         struct acc100_device *d = dev->data->dev_private;
 787         int op_2_acc[5] = {0, UL_4G, DL_4G, UL_5G, DL_5G};
 788         int acc = op_2_acc[conf->op_type];
 789         struct rte_acc100_queue_topology *qtop = NULL;
 790
 791         qtopFromAcc(&qtop, acc, &(d->acc100_conf));
 792         if (qtop == NULL)
 793                 return -1;
 794         /* Identify matching QGroup Index which are sorted in priority order */
 795         uint16_t group_idx = qtop->first_qgroup_index;
 796         group_idx += conf->priority;
 797         if (group_idx >= ACC100_NUM_QGRPS ||
 798                         conf->priority >= qtop->num_qgroups) {
 799                 rte_bbdev_log(INFO, "Invalid Priority on %s, priority %u",
 800                                 dev->data->name, conf->priority);
 801                 return -1;
 802         }
 803         /* Find a free AQ_idx  */
 804         uint16_t aq_idx;
 805         for (aq_idx = 0; aq_idx < qtop->num_aqs_per_groups; aq_idx++) {
 806                 if (((d->q_assigned_bit_map[group_idx] >> aq_idx) & 0x1) == 0) {
 807                         /* Mark the Queue as assigned */
 808                         d->q_assigned_bit_map[group_idx] |= (1 << aq_idx);
 809                         /* Report the AQ Index */
 810                         return (group_idx << ACC100_GRP_ID_SHIFT) + aq_idx;
 811                 }
 812         }
 813         rte_bbdev_log(INFO, "Failed to find free queue on %s, priority %u",
 814                         dev->data->name, conf->priority);
 815         return -1;
 816 }
 817
 818 /* Setup ACC100 queue */
 819 static int
 820 acc100_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
 821                 const struct rte_bbdev_queue_conf *conf)
 822 {
 823         struct acc100_device *d = dev->data->dev_private;
 824         struct acc100_queue *q;
 825         int16_t q_idx;
 826
 827         /* Allocate the queue data structure. */
 828         q = rte_zmalloc_socket(dev->device->driver->name, sizeof(*q),
 829                         RTE_CACHE_LINE_SIZE, conf->socket);
 830         if (q == NULL) {
 831                 rte_bbdev_log(ERR, "Failed to allocate queue memory");
 832                 return -ENOMEM;
 833         }
 834         if (d == NULL) {
 835                 rte_bbdev_log(ERR, "Undefined device");
 836                 return -ENODEV;
 837         }
 838
 839         q->d = d;
 840         q->ring_addr = RTE_PTR_ADD(d->sw_rings, (d->sw_ring_size * queue_id));
 841         q->ring_addr_iova = d->sw_rings_iova + (d->sw_ring_size * queue_id);
 842
 843         /* Prepare the Ring with default descriptor format */
 844         union acc100_dma_desc *desc = NULL;
 845         unsigned int desc_idx, b_idx;
 846         int fcw_len = (conf->op_type == RTE_BBDEV_OP_LDPC_ENC ?
 847                 ACC100_FCW_LE_BLEN : (conf->op_type == RTE_BBDEV_OP_TURBO_DEC ?
 848                 ACC100_FCW_TD_BLEN : ACC100_FCW_LD_BLEN));
 849
 850         for (desc_idx = 0; desc_idx < d->sw_ring_max_depth; desc_idx++) {
 851                 desc = q->ring_addr + desc_idx;
 852                 desc->req.word0 = ACC100_DMA_DESC_TYPE;
 853                 desc->req.word1 = 0; /**< Timestamp */
 854                 desc->req.word2 = 0;
 855                 desc->req.word3 = 0;
 856                 uint64_t fcw_offset = (desc_idx << 8) + ACC100_DESC_FCW_OFFSET;
 857                 desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
 858                 desc->req.data_ptrs[0].blen = fcw_len;
 859                 desc->req.data_ptrs[0].blkid = ACC100_DMA_BLKID_FCW;
 860                 desc->req.data_ptrs[0].last = 0;
 861                 desc->req.data_ptrs[0].dma_ext = 0;
 862                 for (b_idx = 1; b_idx < ACC100_DMA_MAX_NUM_POINTERS - 1;
 863                                 b_idx++) {
 864                         desc->req.data_ptrs[b_idx].blkid = ACC100_DMA_BLKID_IN;
 865                         desc->req.data_ptrs[b_idx].last = 1;
 866                         desc->req.data_ptrs[b_idx].dma_ext = 0;
 867                         b_idx++;
 868                         desc->req.data_ptrs[b_idx].blkid =
 869                                         ACC100_DMA_BLKID_OUT_ENC;
 870                         desc->req.data_ptrs[b_idx].last = 1;
 871                         desc->req.data_ptrs[b_idx].dma_ext = 0;
 872                 }
 873                 /* Preset some fields of LDPC FCW */
 874                 desc->req.fcw_ld.FCWversion = ACC100_FCW_VER;
 875                 desc->req.fcw_ld.gain_i = 1;
 876                 desc->req.fcw_ld.gain_h = 1;
 877         }
 878
 879         q->lb_in = rte_zmalloc_socket(dev->device->driver->name,
 880                         RTE_CACHE_LINE_SIZE,
 881                         RTE_CACHE_LINE_SIZE, conf->socket);
 882         if (q->lb_in == NULL) {
 883                 rte_bbdev_log(ERR, "Failed to allocate lb_in memory");
 884                 rte_free(q);
 885                 return -ENOMEM;
 886         }
 887         q->lb_in_addr_iova = rte_malloc_virt2iova(q->lb_in);
 888         q->lb_out = rte_zmalloc_socket(dev->device->driver->name,
 889                         RTE_CACHE_LINE_SIZE,
 890                         RTE_CACHE_LINE_SIZE, conf->socket);
 891         if (q->lb_out == NULL) {
 892                 rte_bbdev_log(ERR, "Failed to allocate lb_out memory");
 893                 rte_free(q->lb_in);
 894                 rte_free(q);
 895                 return -ENOMEM;
 896         }
 897         q->lb_out_addr_iova = rte_malloc_virt2iova(q->lb_out);
 898
 899         /*
 900          * Software queue ring wraps synchronously with the HW when it reaches
 901          * the boundary of the maximum allocated queue size, no matter what the
 902          * sw queue size is. This wrapping is guarded by setting the wrap_mask
 903          * to represent the maximum queue size as allocated at the time when
 904          * the device has been setup (in configure()).
 905          *
 906          * The queue depth is set to the queue size value (conf->queue_size).
 907          * This limits the occupancy of the queue at any point of time, so that
 908          * the queue does not get swamped with enqueue requests.
 909          */
 910         q->sw_ring_depth = conf->queue_size;
 911         q->sw_ring_wrap_mask = d->sw_ring_max_depth - 1;
 912
 913         q->op_type = conf->op_type;
 914
 915         q_idx = acc100_find_free_queue_idx(dev, conf);
 916         if (q_idx == -1) {
 917                 rte_free(q->lb_in);
 918                 rte_free(q->lb_out);
 919                 rte_free(q);
 920                 return -1;
 921         }
 922
 923         q->qgrp_id = (q_idx >> ACC100_GRP_ID_SHIFT) & 0xF;
 924         q->vf_id = (q_idx >> ACC100_VF_ID_SHIFT)  & 0x3F;
 925         q->aq_id = q_idx & 0xF;
 926         q->aq_depth = (conf->op_type ==  RTE_BBDEV_OP_TURBO_DEC) ?
 927                         (1 << d->acc100_conf.q_ul_4g.aq_depth_log2) :
 928                         (1 << d->acc100_conf.q_dl_4g.aq_depth_log2);
 929
 930         q->mmio_reg_enqueue = RTE_PTR_ADD(d->mmio_base,
 931                         queue_offset(d->pf_device,
 932                                         q->vf_id, q->qgrp_id, q->aq_id));
 933
 934         rte_bbdev_log_debug(
 935                         "Setup dev%u q%u: qgrp_id=%u, vf_id=%u, aq_id=%u, aq_depth=%u, mmio_reg_enqueue=%p",
 936                         dev->data->dev_id, queue_id, q->qgrp_id, q->vf_id,
 937                         q->aq_id, q->aq_depth, q->mmio_reg_enqueue);
 938
 939         dev->data->queues[queue_id].queue_private = q;
 940         return 0;
 941 }
 942
 943 /* Release ACC100 queue */
 944 static int
 945 acc100_queue_release(struct rte_bbdev *dev, uint16_t q_id)
 946 {
 947         struct acc100_device *d = dev->data->dev_private;
 948         struct acc100_queue *q = dev->data->queues[q_id].queue_private;
 949
 950         if (q != NULL) {
 951                 /* Mark the Queue as un-assigned */
 952                 d->q_assigned_bit_map[q->qgrp_id] &= (0xFFFFFFFF -
 953                                 (1 << q->aq_id));
 954                 rte_free(q->lb_in);
 955                 rte_free(q->lb_out);
 956                 rte_free(q);
 957                 dev->data->queues[q_id].queue_private = NULL;
 958         }
 959
 960         return 0;
 961 }
 962
 963 /* Get ACC100 device info */
 964 static void
 965 acc100_dev_info_get(struct rte_bbdev *dev,
 966                 struct rte_bbdev_driver_info *dev_info)
 967 {
 968         struct acc100_device *d = dev->data->dev_private;
 969
 970         static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
 971                 {
 972                         .type = RTE_BBDEV_OP_TURBO_DEC,
 973                         .cap.turbo_dec = {
 974                                 .capability_flags =
 975                                         RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE |
 976                                         RTE_BBDEV_TURBO_CRC_TYPE_24B |
 977                                         RTE_BBDEV_TURBO_HALF_ITERATION_EVEN |
 978                                         RTE_BBDEV_TURBO_EARLY_TERMINATION |
 979                                         RTE_BBDEV_TURBO_DEC_INTERRUPTS |
 980                                         RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN |
 981                                         RTE_BBDEV_TURBO_MAP_DEC |
 982                                         RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP |
 983                                         RTE_BBDEV_TURBO_DEC_SCATTER_GATHER,
 984                                 .max_llr_modulus = INT8_MAX,
 985                                 .num_buffers_src =
 986                                                 RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
 987                                 .num_buffers_hard_out =
 988                                                 RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
 989                                 .num_buffers_soft_out =
 990                                                 RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
 991                         }
 992                 },
 993                 {
 994                         .type = RTE_BBDEV_OP_TURBO_ENC,
 995                         .cap.turbo_enc = {
 996                                 .capability_flags =
 997                                         RTE_BBDEV_TURBO_CRC_24B_ATTACH |
 998                                         RTE_BBDEV_TURBO_RV_INDEX_BYPASS |
 999                                         RTE_BBDEV_TURBO_RATE_MATCH |
1000                                         RTE_BBDEV_TURBO_ENC_INTERRUPTS |
1001                                         RTE_BBDEV_TURBO_ENC_SCATTER_GATHER,
1002                                 .num_buffers_src =
1003                                                 RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
1004                                 .num_buffers_dst =
1005                                                 RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
1006                         }
1007                 },
1008                 {
1009                         .type   = RTE_BBDEV_OP_LDPC_ENC,
1010                         .cap.ldpc_enc = {
1011                                 .capability_flags =
1012                                         RTE_BBDEV_LDPC_RATE_MATCH |
1013                                         RTE_BBDEV_LDPC_CRC_24B_ATTACH |
1014                                         RTE_BBDEV_LDPC_INTERLEAVER_BYPASS |
1015                                         RTE_BBDEV_LDPC_ENC_INTERRUPTS,
1016                                 .num_buffers_src =
1017                                                 RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
1018                                 .num_buffers_dst =
1019                                                 RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
1020                         }
1021                 },
1022                 {
1023                         .type   = RTE_BBDEV_OP_LDPC_DEC,
1024                         .cap.ldpc_dec = {
1025                         .capability_flags =
1026                                 RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK |
1027                                 RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP |
1028                                 RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE |
1029                                 RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE |
1030 #ifdef ACC100_EXT_MEM
1031                                 RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK |
1032                                 RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE |
1033                                 RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE |
1034 #endif
1035                                 RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE |
1036                                 RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS |
1037                                 RTE_BBDEV_LDPC_DECODE_BYPASS |
1038                                 RTE_BBDEV_LDPC_DEC_SCATTER_GATHER |
1039                                 RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION |
1040                                 RTE_BBDEV_LDPC_LLR_COMPRESSION |
1041                                 RTE_BBDEV_LDPC_DEC_INTERRUPTS,
1042                         .llr_size = 8,
1043                         .llr_decimals = 1,
1044                         .num_buffers_src =
1045                                         RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
1046                         .num_buffers_hard_out =
1047                                         RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
1048                         .num_buffers_soft_out = 0,
1049                         }
1050                 },
1051                 RTE_BBDEV_END_OF_CAPABILITIES_LIST()
1052         };
1053
1054         static struct rte_bbdev_queue_conf default_queue_conf;
1055         default_queue_conf.socket = dev->data->socket_id;
1056         default_queue_conf.queue_size = ACC100_MAX_QUEUE_DEPTH;
1057
1058         dev_info->driver_name = dev->device->driver->name;
1059
1060         /* Read and save the populated config from ACC100 registers */
1061         fetch_acc100_config(dev);
1062
1063         /* This isn't ideal because it reports the maximum number of queues but
1064          * does not provide info on how many can be uplink/downlink or different
1065          * priorities
1066          */
1067         dev_info->max_num_queues =
1068                         d->acc100_conf.q_dl_5g.num_aqs_per_groups *
1069                         d->acc100_conf.q_dl_5g.num_qgroups +
1070                         d->acc100_conf.q_ul_5g.num_aqs_per_groups *
1071                         d->acc100_conf.q_ul_5g.num_qgroups +
1072                         d->acc100_conf.q_dl_4g.num_aqs_per_groups *
1073                         d->acc100_conf.q_dl_4g.num_qgroups +
1074                         d->acc100_conf.q_ul_4g.num_aqs_per_groups *
1075                         d->acc100_conf.q_ul_4g.num_qgroups;
1076         dev_info->queue_size_lim = ACC100_MAX_QUEUE_DEPTH;
1077         dev_info->hardware_accelerated = true;
1078         dev_info->max_dl_queue_priority =
1079                         d->acc100_conf.q_dl_4g.num_qgroups - 1;
1080         dev_info->max_ul_queue_priority =
1081                         d->acc100_conf.q_ul_4g.num_qgroups - 1;
1082         dev_info->default_queue_conf = default_queue_conf;
1083         dev_info->cpu_flag_reqs = NULL;
1084         dev_info->min_alignment = 64;
1085         dev_info->capabilities = bbdev_capabilities;
1086 #ifdef ACC100_EXT_MEM
1087         dev_info->harq_buffer_size = d->ddr_size;
1088 #else
1089         dev_info->harq_buffer_size = 0;
1090 #endif
1091         acc100_check_ir(d);
1092 }
1093
1094 static int
1095 acc100_queue_intr_enable(struct rte_bbdev *dev, uint16_t queue_id)
1096 {
1097         struct acc100_queue *q = dev->data->queues[queue_id].queue_private;
1098
1099         if (dev->intr_handle->type != RTE_INTR_HANDLE_VFIO_MSI &&
1100                         dev->intr_handle->type != RTE_INTR_HANDLE_UIO)
1101                 return -ENOTSUP;
1102
1103         q->irq_enable = 1;
1104         return 0;
1105 }
1106
1107 static int
1108 acc100_queue_intr_disable(struct rte_bbdev *dev, uint16_t queue_id)
1109 {
1110         struct acc100_queue *q = dev->data->queues[queue_id].queue_private;
1111
1112         if (dev->intr_handle->type != RTE_INTR_HANDLE_VFIO_MSI &&
1113                         dev->intr_handle->type != RTE_INTR_HANDLE_UIO)
1114                 return -ENOTSUP;
1115
1116         q->irq_enable = 0;
1117         return 0;
1118 }
1119
1120 static const struct rte_bbdev_ops acc100_bbdev_ops = {
1121         .setup_queues = acc100_setup_queues,
1122         .intr_enable = acc100_intr_enable,
1123         .close = acc100_dev_close,
1124         .info_get = acc100_dev_info_get,
1125         .queue_setup = acc100_queue_setup,
1126         .queue_release = acc100_queue_release,
1127         .queue_intr_enable = acc100_queue_intr_enable,
1128         .queue_intr_disable = acc100_queue_intr_disable
1129 };
1130
1131 /* ACC100 PCI PF address map */
1132 static struct rte_pci_id pci_id_acc100_pf_map[] = {
1133         {
1134                 RTE_PCI_DEVICE(RTE_ACC100_VENDOR_ID, RTE_ACC100_PF_DEVICE_ID)
1135         },
1136         {.device_id = 0},
1137 };
1138
1139 /* ACC100 PCI VF address map */
1140 static struct rte_pci_id pci_id_acc100_vf_map[] = {
1141         {
1142                 RTE_PCI_DEVICE(RTE_ACC100_VENDOR_ID, RTE_ACC100_VF_DEVICE_ID)
1143         },
1144         {.device_id = 0},
1145 };
1146
1147 /* Read flag value 0/1 from bitmap */
1148 static inline bool
1149 check_bit(uint32_t bitmap, uint32_t bitmask)
1150 {
1151         return bitmap & bitmask;
1152 }
1153
1154 static inline char *
1155 mbuf_append(struct rte_mbuf *m_head, struct rte_mbuf *m, uint16_t len)
1156 {
1157         if (unlikely(len > rte_pktmbuf_tailroom(m)))
1158                 return NULL;
1159
1160         char *tail = (char *)m->buf_addr + m->data_off + m->data_len;
1161         m->data_len = (uint16_t)(m->data_len + len);
1162         m_head->pkt_len  = (m_head->pkt_len + len);
1163         return tail;
1164 }
1165
1166 /* Fill in a frame control word for turbo encoding. */
1167 static inline void
1168 acc100_fcw_te_fill(const struct rte_bbdev_enc_op *op, struct acc100_fcw_te *fcw)
1169 {
1170         fcw->code_block_mode = op->turbo_enc.code_block_mode;
1171         if (fcw->code_block_mode == 0) { /* For TB mode */
1172                 fcw->k_neg = op->turbo_enc.tb_params.k_neg;
1173                 fcw->k_pos = op->turbo_enc.tb_params.k_pos;
1174                 fcw->c_neg = op->turbo_enc.tb_params.c_neg;
1175                 fcw->c = op->turbo_enc.tb_params.c;
1176                 fcw->ncb_neg = op->turbo_enc.tb_params.ncb_neg;
1177                 fcw->ncb_pos = op->turbo_enc.tb_params.ncb_pos;
1178
1179                 if (check_bit(op->turbo_enc.op_flags,
1180                                 RTE_BBDEV_TURBO_RATE_MATCH)) {
1181                         fcw->bypass_rm = 0;
1182                         fcw->cab = op->turbo_enc.tb_params.cab;
1183                         fcw->ea = op->turbo_enc.tb_params.ea;
1184                         fcw->eb = op->turbo_enc.tb_params.eb;
1185                 } else {
1186                         /* E is set to the encoding output size when RM is
1187                          * bypassed.
1188                          */
1189                         fcw->bypass_rm = 1;
1190                         fcw->cab = fcw->c_neg;
1191                         fcw->ea = 3 * fcw->k_neg + 12;
1192                         fcw->eb = 3 * fcw->k_pos + 12;
1193                 }
1194         } else { /* For CB mode */
1195                 fcw->k_pos = op->turbo_enc.cb_params.k;
1196                 fcw->ncb_pos = op->turbo_enc.cb_params.ncb;
1197
1198                 if (check_bit(op->turbo_enc.op_flags,
1199                                 RTE_BBDEV_TURBO_RATE_MATCH)) {
1200                         fcw->bypass_rm = 0;
1201                         fcw->eb = op->turbo_enc.cb_params.e;
1202                 } else {
1203                         /* E is set to the encoding output size when RM is
1204                          * bypassed.
1205                          */
1206                         fcw->bypass_rm = 1;
1207                         fcw->eb = 3 * fcw->k_pos + 12;
1208                 }
1209         }
1210
1211         fcw->bypass_rv_idx1 = check_bit(op->turbo_enc.op_flags,
1212                         RTE_BBDEV_TURBO_RV_INDEX_BYPASS);
1213         fcw->code_block_crc = check_bit(op->turbo_enc.op_flags,
1214                         RTE_BBDEV_TURBO_CRC_24B_ATTACH);
1215         fcw->rv_idx1 = op->turbo_enc.rv_index;
1216 }
1217
1218 /* Compute value of k0.
1219  * Based on 3GPP 38.212 Table 5.4.2.1-2
1220  * Starting position of different redundancy versions, k0
1221  */
1222 static inline uint16_t
1223 get_k0(uint16_t n_cb, uint16_t z_c, uint8_t bg, uint8_t rv_index)
1224 {
1225         if (rv_index == 0)
1226                 return 0;
1227         uint16_t n = (bg == 1 ? ACC100_N_ZC_1 : ACC100_N_ZC_2) * z_c;
1228         if (n_cb == n) {
1229                 if (rv_index == 1)
1230                         return (bg == 1 ? ACC100_K0_1_1 : ACC100_K0_1_2) * z_c;
1231                 else if (rv_index == 2)
1232                         return (bg == 1 ? ACC100_K0_2_1 : ACC100_K0_2_2) * z_c;
1233                 else
1234                         return (bg == 1 ? ACC100_K0_3_1 : ACC100_K0_3_2) * z_c;
1235         }
1236         /* LBRM case - includes a division by N */
1237         if (rv_index == 1)
1238                 return (((bg == 1 ? ACC100_K0_1_1 : ACC100_K0_1_2) * n_cb)
1239                                 / n) * z_c;
1240         else if (rv_index == 2)
1241                 return (((bg == 1 ? ACC100_K0_2_1 : ACC100_K0_2_2) * n_cb)
1242                                 / n) * z_c;
1243         else
1244                 return (((bg == 1 ? ACC100_K0_3_1 : ACC100_K0_3_2) * n_cb)
1245                                 / n) * z_c;
1246 }
1247
1248 /* Fill in a frame control word for LDPC encoding. */
1249 static inline void
1250 acc100_fcw_le_fill(const struct rte_bbdev_enc_op *op,
1251                 struct acc100_fcw_le *fcw, int num_cb)
1252 {
1253         fcw->qm = op->ldpc_enc.q_m;
1254         fcw->nfiller = op->ldpc_enc.n_filler;
1255         fcw->BG = (op->ldpc_enc.basegraph - 1);
1256         fcw->Zc = op->ldpc_enc.z_c;
1257         fcw->ncb = op->ldpc_enc.n_cb;
1258         fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_enc.basegraph,
1259                         op->ldpc_enc.rv_index);
1260         fcw->rm_e = op->ldpc_enc.cb_params.e;
1261         fcw->crc_select = check_bit(op->ldpc_enc.op_flags,
1262                         RTE_BBDEV_LDPC_CRC_24B_ATTACH);
1263         fcw->bypass_intlv = check_bit(op->ldpc_enc.op_flags,
1264                         RTE_BBDEV_LDPC_INTERLEAVER_BYPASS);
1265         fcw->mcb_count = num_cb;
1266 }
1267
1268 /* Fill in a frame control word for turbo decoding. */
1269 static inline void
1270 acc100_fcw_td_fill(const struct rte_bbdev_dec_op *op, struct acc100_fcw_td *fcw)
1271 {
1272         /* Note : Early termination is always enabled for 4GUL */
1273         fcw->fcw_ver = 1;
1274         if (op->turbo_dec.code_block_mode == 0)
1275                 fcw->k_pos = op->turbo_dec.tb_params.k_pos;
1276         else
1277                 fcw->k_pos = op->turbo_dec.cb_params.k;
1278         fcw->turbo_crc_type = check_bit(op->turbo_dec.op_flags,
1279                         RTE_BBDEV_TURBO_CRC_TYPE_24B);
1280         fcw->bypass_sb_deint = 0;
1281         fcw->raw_decoder_input_on = 0;
1282         fcw->max_iter = op->turbo_dec.iter_max;
1283         fcw->half_iter_on = !check_bit(op->turbo_dec.op_flags,
1284                         RTE_BBDEV_TURBO_HALF_ITERATION_EVEN);
1285 }
1286
1287 /* Fill in a frame control word for LDPC decoding. */
1288 static inline void
1289 acc100_fcw_ld_fill(const struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
1290                 union acc100_harq_layout_data *harq_layout)
1291 {
1292         uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset;
1293         uint16_t harq_index;
1294         uint32_t l;
1295         bool harq_prun = false;
1296
1297         fcw->qm = op->ldpc_dec.q_m;
1298         fcw->nfiller = op->ldpc_dec.n_filler;
1299         fcw->BG = (op->ldpc_dec.basegraph - 1);
1300         fcw->Zc = op->ldpc_dec.z_c;
1301         fcw->ncb = op->ldpc_dec.n_cb;
1302         fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_dec.basegraph,
1303                         op->ldpc_dec.rv_index);
1304         if (op->ldpc_dec.code_block_mode == 1)
1305                 fcw->rm_e = op->ldpc_dec.cb_params.e;
1306         else
1307                 fcw->rm_e = (op->ldpc_dec.tb_params.r <
1308                                 op->ldpc_dec.tb_params.cab) ?
1309                                                 op->ldpc_dec.tb_params.ea :
1310                                                 op->ldpc_dec.tb_params.eb;
1311
1312         fcw->hcin_en = check_bit(op->ldpc_dec.op_flags,
1313                         RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE);
1314         fcw->hcout_en = check_bit(op->ldpc_dec.op_flags,
1315                         RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE);
1316         fcw->crc_select = check_bit(op->ldpc_dec.op_flags,
1317                         RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK);
1318         fcw->bypass_dec = check_bit(op->ldpc_dec.op_flags,
1319                         RTE_BBDEV_LDPC_DECODE_BYPASS);
1320         fcw->bypass_intlv = check_bit(op->ldpc_dec.op_flags,
1321                         RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS);
1322         if (op->ldpc_dec.q_m == 1) {
1323                 fcw->bypass_intlv = 1;
1324                 fcw->qm = 2;
1325         }
1326         fcw->hcin_decomp_mode = check_bit(op->ldpc_dec.op_flags,
1327                         RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
1328         fcw->hcout_comp_mode = check_bit(op->ldpc_dec.op_flags,
1329                         RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
1330         fcw->llr_pack_mode = check_bit(op->ldpc_dec.op_flags,
1331                         RTE_BBDEV_LDPC_LLR_COMPRESSION);
1332         harq_index = op->ldpc_dec.harq_combined_output.offset /
1333                         ACC100_HARQ_OFFSET;
1334 #ifdef ACC100_EXT_MEM
1335         /* Limit cases when HARQ pruning is valid */
1336         harq_prun = ((op->ldpc_dec.harq_combined_output.offset %
1337                         ACC100_HARQ_OFFSET) == 0) &&
1338                         (op->ldpc_dec.harq_combined_output.offset <= UINT16_MAX
1339                         * ACC100_HARQ_OFFSET);
1340 #endif
1341         if (fcw->hcin_en > 0) {
1342                 harq_in_length = op->ldpc_dec.harq_combined_input.length;
1343                 if (fcw->hcin_decomp_mode > 0)
1344                         harq_in_length = harq_in_length * 8 / 6;
1345                 harq_in_length = RTE_ALIGN(harq_in_length, 64);
1346                 if ((harq_layout[harq_index].offset > 0) & harq_prun) {
1347                         rte_bbdev_log_debug("HARQ IN offset unexpected for now\n");
1348                         fcw->hcin_size0 = harq_layout[harq_index].size0;
1349                         fcw->hcin_offset = harq_layout[harq_index].offset;
1350                         fcw->hcin_size1 = harq_in_length -
1351                                         harq_layout[harq_index].offset;
1352                 } else {
1353                         fcw->hcin_size0 = harq_in_length;
1354                         fcw->hcin_offset = 0;
1355                         fcw->hcin_size1 = 0;
1356                 }
1357         } else {
1358                 fcw->hcin_size0 = 0;
1359                 fcw->hcin_offset = 0;
1360                 fcw->hcin_size1 = 0;
1361         }
1362
1363         fcw->itmax = op->ldpc_dec.iter_max;
1364         fcw->itstop = check_bit(op->ldpc_dec.op_flags,
1365                         RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE);
1366         fcw->synd_precoder = fcw->itstop;
1367         /*
1368          * These are all implicitly set
1369          * fcw->synd_post = 0;
1370          * fcw->so_en = 0;
1371          * fcw->so_bypass_rm = 0;
1372          * fcw->so_bypass_intlv = 0;
1373          * fcw->dec_convllr = 0;
1374          * fcw->hcout_convllr = 0;
1375          * fcw->hcout_size1 = 0;
1376          * fcw->so_it = 0;
1377          * fcw->hcout_offset = 0;
1378          * fcw->negstop_th = 0;
1379          * fcw->negstop_it = 0;
1380          * fcw->negstop_en = 0;
1381          * fcw->gain_i = 1;
1382          * fcw->gain_h = 1;
1383          */
1384         if (fcw->hcout_en > 0) {
1385                 parity_offset = (op->ldpc_dec.basegraph == 1 ? 20 : 8)
1386                         * op->ldpc_dec.z_c - op->ldpc_dec.n_filler;
1387                 k0_p = (fcw->k0 > parity_offset) ?
1388                                 fcw->k0 - op->ldpc_dec.n_filler : fcw->k0;
1389                 ncb_p = fcw->ncb - op->ldpc_dec.n_filler;
1390                 l = k0_p + fcw->rm_e;
1391                 harq_out_length = (uint16_t) fcw->hcin_size0;
1392                 harq_out_length = RTE_MIN(RTE_MAX(harq_out_length, l), ncb_p);
1393                 harq_out_length = (harq_out_length + 0x3F) & 0xFFC0;
1394                 if ((k0_p > fcw->hcin_size0 + ACC100_HARQ_OFFSET_THRESHOLD) &&
1395                                 harq_prun) {
1396                         fcw->hcout_size0 = (uint16_t) fcw->hcin_size0;
1397                         fcw->hcout_offset = k0_p & 0xFFC0;
1398                         fcw->hcout_size1 = harq_out_length - fcw->hcout_offset;
1399                 } else {
1400                         fcw->hcout_size0 = harq_out_length;
1401                         fcw->hcout_size1 = 0;
1402                         fcw->hcout_offset = 0;
1403                 }
1404                 harq_layout[harq_index].offset = fcw->hcout_offset;
1405                 harq_layout[harq_index].size0 = fcw->hcout_size0;
1406         } else {
1407                 fcw->hcout_size0 = 0;
1408                 fcw->hcout_size1 = 0;
1409                 fcw->hcout_offset = 0;
1410         }
1411 }
1412
1413 /**
1414  * Fills descriptor with data pointers of one block type.
1415  *
1416  * @param desc
1417  *   Pointer to DMA descriptor.
1418  * @param input
1419  *   Pointer to pointer to input data which will be encoded. It can be changed
1420  *   and points to next segment in scatter-gather case.
1421  * @param offset
1422  *   Input offset in rte_mbuf structure. It is used for calculating the point
1423  *   where data is starting.
1424  * @param cb_len
1425  *   Length of currently processed Code Block
1426  * @param seg_total_left
1427  *   It indicates how many bytes still left in segment (mbuf) for further
1428  *   processing.
1429  * @param op_flags
1430  *   Store information about device capabilities
1431  * @param next_triplet
1432  *   Index for ACC100 DMA Descriptor triplet
1433  *
1434  * @return
1435  *   Returns index of next triplet on success, other value if lengths of
1436  *   pkt and processed cb do not match.
1437  *
1438  */
1439 static inline int
1440 acc100_dma_fill_blk_type_in(struct acc100_dma_req_desc *desc,
1441                 struct rte_mbuf **input, uint32_t *offset, uint32_t cb_len,
1442                 uint32_t *seg_total_left, int next_triplet)
1443 {
1444         uint32_t part_len;
1445         struct rte_mbuf *m = *input;
1446
1447         part_len = (*seg_total_left < cb_len) ? *seg_total_left : cb_len;
1448         cb_len -= part_len;
1449         *seg_total_left -= part_len;
1450
1451         desc->data_ptrs[next_triplet].address =
1452                         rte_pktmbuf_iova_offset(m, *offset);
1453         desc->data_ptrs[next_triplet].blen = part_len;
1454         desc->data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_IN;
1455         desc->data_ptrs[next_triplet].last = 0;
1456         desc->data_ptrs[next_triplet].dma_ext = 0;
1457         *offset += part_len;
1458         next_triplet++;
1459
1460         while (cb_len > 0) {
1461                 if (next_triplet < ACC100_DMA_MAX_NUM_POINTERS &&
1462                                 m->next != NULL) {
1463
1464                         m = m->next;
1465                         *seg_total_left = rte_pktmbuf_data_len(m);
1466                         part_len = (*seg_total_left < cb_len) ?
1467                                         *seg_total_left :
1468                                         cb_len;
1469                         desc->data_ptrs[next_triplet].address =
1470                                         rte_pktmbuf_iova_offset(m, 0);
1471                         desc->data_ptrs[next_triplet].blen = part_len;
1472                         desc->data_ptrs[next_triplet].blkid =
1473                                         ACC100_DMA_BLKID_IN;
1474                         desc->data_ptrs[next_triplet].last = 0;
1475                         desc->data_ptrs[next_triplet].dma_ext = 0;
1476                         cb_len -= part_len;
1477                         *seg_total_left -= part_len;
1478                         /* Initializing offset for next segment (mbuf) */
1479                         *offset = part_len;
1480                         next_triplet++;
1481                 } else {
1482                         rte_bbdev_log(ERR,
1483                                 "Some data still left for processing: "
1484                                 "data_left: %u, next_triplet: %u, next_mbuf: %p",
1485                                 cb_len, next_triplet, m->next);
1486                         return -EINVAL;
1487                 }
1488         }
1489         /* Storing new mbuf as it could be changed in scatter-gather case*/
1490         *input = m;
1491
1492         return next_triplet;
1493 }
1494
1495 /* Fills descriptor with data pointers of one block type.
1496  * Returns index of next triplet on success, other value if lengths of
1497  * output data and processed mbuf do not match.
1498  */
1499 static inline int
1500 acc100_dma_fill_blk_type_out(struct acc100_dma_req_desc *desc,
1501                 struct rte_mbuf *output, uint32_t out_offset,
1502                 uint32_t output_len, int next_triplet, int blk_id)
1503 {
1504         desc->data_ptrs[next_triplet].address =
1505                         rte_pktmbuf_iova_offset(output, out_offset);
1506         desc->data_ptrs[next_triplet].blen = output_len;
1507         desc->data_ptrs[next_triplet].blkid = blk_id;
1508         desc->data_ptrs[next_triplet].last = 0;
1509         desc->data_ptrs[next_triplet].dma_ext = 0;
1510         next_triplet++;
1511
1512         return next_triplet;
1513 }
1514
1515 static inline void
1516 acc100_header_init(struct acc100_dma_req_desc *desc)
1517 {
1518         desc->word0 = ACC100_DMA_DESC_TYPE;
1519         desc->word1 = 0; /**< Timestamp could be disabled */
1520         desc->word2 = 0;
1521         desc->word3 = 0;
1522         desc->numCBs = 1;
1523 }
1524
1525 #ifdef RTE_LIBRTE_BBDEV_DEBUG
1526 /* Check if any input data is unexpectedly left for processing */
1527 static inline int
1528 check_mbuf_total_left(uint32_t mbuf_total_left)
1529 {
1530         if (mbuf_total_left == 0)
1531                 return 0;
1532         rte_bbdev_log(ERR,
1533                 "Some date still left for processing: mbuf_total_left = %u",
1534                 mbuf_total_left);
1535         return -EINVAL;
1536 }
1537 #endif
1538
1539 static inline int
1540 acc100_dma_desc_te_fill(struct rte_bbdev_enc_op *op,
1541                 struct acc100_dma_req_desc *desc, struct rte_mbuf **input,
1542                 struct rte_mbuf *output, uint32_t *in_offset,
1543                 uint32_t *out_offset, uint32_t *out_length,
1544                 uint32_t *mbuf_total_left, uint32_t *seg_total_left, uint8_t r)
1545 {
1546         int next_triplet = 1; /* FCW already done */
1547         uint32_t e, ea, eb, length;
1548         uint16_t k, k_neg, k_pos;
1549         uint8_t cab, c_neg;
1550
1551         desc->word0 = ACC100_DMA_DESC_TYPE;
1552         desc->word1 = 0; /**< Timestamp could be disabled */
1553         desc->word2 = 0;
1554         desc->word3 = 0;
1555         desc->numCBs = 1;
1556
1557         if (op->turbo_enc.code_block_mode == 0) {
1558                 ea = op->turbo_enc.tb_params.ea;
1559                 eb = op->turbo_enc.tb_params.eb;
1560                 cab = op->turbo_enc.tb_params.cab;
1561                 k_neg = op->turbo_enc.tb_params.k_neg;
1562                 k_pos = op->turbo_enc.tb_params.k_pos;
1563                 c_neg = op->turbo_enc.tb_params.c_neg;
1564                 e = (r < cab) ? ea : eb;
1565                 k = (r < c_neg) ? k_neg : k_pos;
1566         } else {
1567                 e = op->turbo_enc.cb_params.e;
1568                 k = op->turbo_enc.cb_params.k;
1569         }
1570
1571         if (check_bit(op->turbo_enc.op_flags, RTE_BBDEV_TURBO_CRC_24B_ATTACH))
1572                 length = (k - 24) >> 3;
1573         else
1574                 length = k >> 3;
1575
1576         if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < length))) {
1577                 rte_bbdev_log(ERR,
1578                                 "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
1579                                 *mbuf_total_left, length);
1580                 return -1;
1581         }
1582
1583         next_triplet = acc100_dma_fill_blk_type_in(desc, input, in_offset,
1584                         length, seg_total_left, next_triplet);
1585         if (unlikely(next_triplet < 0)) {
1586                 rte_bbdev_log(ERR,
1587                                 "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1588                                 op);
1589                 return -1;
1590         }
1591         desc->data_ptrs[next_triplet - 1].last = 1;
1592         desc->m2dlen = next_triplet;
1593         *mbuf_total_left -= length;
1594
1595         /* Set output length */
1596         if (check_bit(op->turbo_enc.op_flags, RTE_BBDEV_TURBO_RATE_MATCH))
1597                 /* Integer round up division by 8 */
1598                 *out_length = (e + 7) >> 3;
1599         else
1600                 *out_length = (k >> 3) * 3 + 2;
1601
1602         next_triplet = acc100_dma_fill_blk_type_out(desc, output, *out_offset,
1603                         *out_length, next_triplet, ACC100_DMA_BLKID_OUT_ENC);
1604         if (unlikely(next_triplet < 0)) {
1605                 rte_bbdev_log(ERR,
1606                                 "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1607                                 op);
1608                 return -1;
1609         }
1610         op->turbo_enc.output.length += *out_length;
1611         *out_offset += *out_length;
1612         desc->data_ptrs[next_triplet - 1].last = 1;
1613         desc->d2mlen = next_triplet - desc->m2dlen;
1614
1615         desc->op_addr = op;
1616
1617         return 0;
1618 }
1619
1620 static inline int
1621 acc100_dma_desc_le_fill(struct rte_bbdev_enc_op *op,
1622                 struct acc100_dma_req_desc *desc, struct rte_mbuf **input,
1623                 struct rte_mbuf *output, uint32_t *in_offset,
1624                 uint32_t *out_offset, uint32_t *out_length,
1625                 uint32_t *mbuf_total_left, uint32_t *seg_total_left)
1626 {
1627         int next_triplet = 1; /* FCW already done */
1628         uint16_t K, in_length_in_bits, in_length_in_bytes;
1629         struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc;
1630
1631         acc100_header_init(desc);
1632
1633         K = (enc->basegraph == 1 ? 22 : 10) * enc->z_c;
1634         in_length_in_bits = K - enc->n_filler;
1635         if ((enc->op_flags & RTE_BBDEV_LDPC_CRC_24A_ATTACH) ||
1636                         (enc->op_flags & RTE_BBDEV_LDPC_CRC_24B_ATTACH))
1637                 in_length_in_bits -= 24;
1638         in_length_in_bytes = in_length_in_bits >> 3;
1639
1640         if (unlikely((*mbuf_total_left == 0) ||
1641                         (*mbuf_total_left < in_length_in_bytes))) {
1642                 rte_bbdev_log(ERR,
1643                                 "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
1644                                 *mbuf_total_left, in_length_in_bytes);
1645                 return -1;
1646         }
1647
1648         next_triplet = acc100_dma_fill_blk_type_in(desc, input, in_offset,
1649                         in_length_in_bytes,
1650                         seg_total_left, next_triplet);
1651         if (unlikely(next_triplet < 0)) {
1652                 rte_bbdev_log(ERR,
1653                                 "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1654                                 op);
1655                 return -1;
1656         }
1657         desc->data_ptrs[next_triplet - 1].last = 1;
1658         desc->m2dlen = next_triplet;
1659         *mbuf_total_left -= in_length_in_bytes;
1660
1661         /* Set output length */
1662         /* Integer round up division by 8 */
1663         *out_length = (enc->cb_params.e + 7) >> 3;
1664
1665         next_triplet = acc100_dma_fill_blk_type_out(desc, output, *out_offset,
1666                         *out_length, next_triplet, ACC100_DMA_BLKID_OUT_ENC);
1667         op->ldpc_enc.output.length += *out_length;
1668         *out_offset += *out_length;
1669         desc->data_ptrs[next_triplet - 1].last = 1;
1670         desc->data_ptrs[next_triplet - 1].dma_ext = 0;
1671         desc->d2mlen = next_triplet - desc->m2dlen;
1672
1673         desc->op_addr = op;
1674
1675         return 0;
1676 }
1677
1678 static inline int
1679 acc100_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
1680                 struct acc100_dma_req_desc *desc, struct rte_mbuf **input,
1681                 struct rte_mbuf *h_output, struct rte_mbuf *s_output,
1682                 uint32_t *in_offset, uint32_t *h_out_offset,
1683                 uint32_t *s_out_offset, uint32_t *h_out_length,
1684                 uint32_t *s_out_length, uint32_t *mbuf_total_left,
1685                 uint32_t *seg_total_left, uint8_t r)
1686 {
1687         int next_triplet = 1; /* FCW already done */
1688         uint16_t k;
1689         uint16_t crc24_overlap = 0;
1690         uint32_t e, kw;
1691
1692         desc->word0 = ACC100_DMA_DESC_TYPE;
1693         desc->word1 = 0; /**< Timestamp could be disabled */
1694         desc->word2 = 0;
1695         desc->word3 = 0;
1696         desc->numCBs = 1;
1697
1698         if (op->turbo_dec.code_block_mode == 0) {
1699                 k = (r < op->turbo_dec.tb_params.c_neg)
1700                         ? op->turbo_dec.tb_params.k_neg
1701                         : op->turbo_dec.tb_params.k_pos;
1702                 e = (r < op->turbo_dec.tb_params.cab)
1703                         ? op->turbo_dec.tb_params.ea
1704                         : op->turbo_dec.tb_params.eb;
1705         } else {
1706                 k = op->turbo_dec.cb_params.k;
1707                 e = op->turbo_dec.cb_params.e;
1708         }
1709
1710         if ((op->turbo_dec.code_block_mode == 0)
1711                 && !check_bit(op->turbo_dec.op_flags,
1712                 RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP))
1713                 crc24_overlap = 24;
1714
1715         /* Calculates circular buffer size.
1716          * According to 3gpp 36.212 section 5.1.4.2
1717          *   Kw = 3 * Kpi,
1718          * where:
1719          *   Kpi = nCol * nRow
1720          * where nCol is 32 and nRow can be calculated from:
1721          *   D =< nCol * nRow
1722          * where D is the size of each output from turbo encoder block (k + 4).
1723          */
1724         kw = RTE_ALIGN_CEIL(k + 4, 32) * 3;
1725
1726         if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < kw))) {
1727                 rte_bbdev_log(ERR,
1728                                 "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
1729                                 *mbuf_total_left, kw);
1730                 return -1;
1731         }
1732
1733         next_triplet = acc100_dma_fill_blk_type_in(desc, input, in_offset, kw,
1734                         seg_total_left, next_triplet);
1735         if (unlikely(next_triplet < 0)) {
1736                 rte_bbdev_log(ERR,
1737                                 "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1738                                 op);
1739                 return -1;
1740         }
1741         desc->data_ptrs[next_triplet - 1].last = 1;
1742         desc->m2dlen = next_triplet;
1743         *mbuf_total_left -= kw;
1744
1745         next_triplet = acc100_dma_fill_blk_type_out(
1746                         desc, h_output, *h_out_offset,
1747                         k >> 3, next_triplet, ACC100_DMA_BLKID_OUT_HARD);
1748         if (unlikely(next_triplet < 0)) {
1749                 rte_bbdev_log(ERR,
1750                                 "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1751                                 op);
1752                 return -1;
1753         }
1754
1755         *h_out_length = ((k - crc24_overlap) >> 3);
1756         op->turbo_dec.hard_output.length += *h_out_length;
1757         *h_out_offset += *h_out_length;
1758
1759         /* Soft output */
1760         if (check_bit(op->turbo_dec.op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT)) {
1761                 if (check_bit(op->turbo_dec.op_flags,
1762                                 RTE_BBDEV_TURBO_EQUALIZER))
1763                         *s_out_length = e;
1764                 else
1765                         *s_out_length = (k * 3) + 12;
1766
1767                 next_triplet = acc100_dma_fill_blk_type_out(desc, s_output,
1768                                 *s_out_offset, *s_out_length, next_triplet,
1769                                 ACC100_DMA_BLKID_OUT_SOFT);
1770                 if (unlikely(next_triplet < 0)) {
1771                         rte_bbdev_log(ERR,
1772                                         "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1773                                         op);
1774                         return -1;
1775                 }
1776
1777                 op->turbo_dec.soft_output.length += *s_out_length;
1778                 *s_out_offset += *s_out_length;
1779         }
1780
1781         desc->data_ptrs[next_triplet - 1].last = 1;
1782         desc->d2mlen = next_triplet - desc->m2dlen;
1783
1784         desc->op_addr = op;
1785
1786         return 0;
1787 }
1788
1789 static inline int
1790 acc100_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
1791                 struct acc100_dma_req_desc *desc,
1792                 struct rte_mbuf **input, struct rte_mbuf *h_output,
1793                 uint32_t *in_offset, uint32_t *h_out_offset,
1794                 uint32_t *h_out_length, uint32_t *mbuf_total_left,
1795                 uint32_t *seg_total_left,
1796                 struct acc100_fcw_ld *fcw)
1797 {
1798         struct rte_bbdev_op_ldpc_dec *dec = &op->ldpc_dec;
1799         int next_triplet = 1; /* FCW already done */
1800         uint32_t input_length;
1801         uint16_t output_length, crc24_overlap = 0;
1802         uint16_t sys_cols, K, h_p_size, h_np_size;
1803         bool h_comp = check_bit(dec->op_flags,
1804                         RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
1805
1806         acc100_header_init(desc);
1807
1808         if (check_bit(op->ldpc_dec.op_flags,
1809                         RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP))
1810                 crc24_overlap = 24;
1811
1812         /* Compute some LDPC BG lengths */
1813         input_length = dec->cb_params.e;
1814         if (check_bit(op->ldpc_dec.op_flags,
1815                         RTE_BBDEV_LDPC_LLR_COMPRESSION))
1816                 input_length = (input_length * 3 + 3) / 4;
1817         sys_cols = (dec->basegraph == 1) ? 22 : 10;
1818         K = sys_cols * dec->z_c;
1819         output_length = K - dec->n_filler - crc24_overlap;
1820
1821         if (unlikely((*mbuf_total_left == 0) ||
1822                         (*mbuf_total_left < input_length))) {
1823                 rte_bbdev_log(ERR,
1824                                 "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
1825                                 *mbuf_total_left, input_length);
1826                 return -1;
1827         }
1828
1829         next_triplet = acc100_dma_fill_blk_type_in(desc, input,
1830                         in_offset, input_length,
1831                         seg_total_left, next_triplet);
1832
1833         if (unlikely(next_triplet < 0)) {
1834                 rte_bbdev_log(ERR,
1835                                 "Mismatch between data to process and mbuf data length in bbdev_op: %p",
1836                                 op);
1837                 return -1;
1838         }
1839
1840         if (check_bit(op->ldpc_dec.op_flags,
1841                                 RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) {
1842                 h_p_size = fcw->hcin_size0 + fcw->hcin_size1;
1843                 if (h_comp)
1844                         h_p_size = (h_p_size * 3 + 3) / 4;
1845                 desc->data_ptrs[next_triplet].address =
1846                                 dec->harq_combined_input.offset;
1847                 desc->data_ptrs[next_triplet].blen = h_p_size;
1848                 desc->data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_IN_HARQ;
1849                 desc->data_ptrs[next_triplet].dma_ext = 1;
1850 #ifndef ACC100_EXT_MEM
1851                 acc100_dma_fill_blk_type_out(
1852                                 desc,
1853                                 op->ldpc_dec.harq_combined_input.data,
1854                                 op->ldpc_dec.harq_combined_input.offset,
1855                                 h_p_size,
1856                                 next_triplet,
1857                                 ACC100_DMA_BLKID_IN_HARQ);
1858 #endif
1859                 next_triplet++;
1860         }
1861
1862         desc->data_ptrs[next_triplet - 1].last = 1;
1863         desc->m2dlen = next_triplet;
1864         *mbuf_total_left -= input_length;
1865
1866         next_triplet = acc100_dma_fill_blk_type_out(desc, h_output,
1867                         *h_out_offset, output_length >> 3, next_triplet,
1868                         ACC100_DMA_BLKID_OUT_HARD);
1869
1870         if (check_bit(op->ldpc_dec.op_flags,
1871                                 RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
1872                 /* Pruned size of the HARQ */
1873                 h_p_size = fcw->hcout_size0 + fcw->hcout_size1;
1874                 /* Non-Pruned size of the HARQ */
1875                 h_np_size = fcw->hcout_offset > 0 ?
1876                                 fcw->hcout_offset + fcw->hcout_size1 :
1877                                 h_p_size;
1878                 if (h_comp) {
1879                         h_np_size = (h_np_size * 3 + 3) / 4;
1880                         h_p_size = (h_p_size * 3 + 3) / 4;
1881                 }
1882                 dec->harq_combined_output.length = h_np_size;
1883                 desc->data_ptrs[next_triplet].address =
1884                                 dec->harq_combined_output.offset;
1885                 desc->data_ptrs[next_triplet].blen = h_p_size;
1886                 desc->data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_OUT_HARQ;
1887                 desc->data_ptrs[next_triplet].dma_ext = 1;
1888 #ifndef ACC100_EXT_MEM
1889                 acc100_dma_fill_blk_type_out(
1890                                 desc,
1891                                 dec->harq_combined_output.data,
1892                                 dec->harq_combined_output.offset,
1893                                 h_p_size,
1894                                 next_triplet,
1895                                 ACC100_DMA_BLKID_OUT_HARQ);
1896 #endif
1897                 next_triplet++;
1898         }
1899
1900         *h_out_length = output_length >> 3;
1901         dec->hard_output.length += *h_out_length;
1902         *h_out_offset += *h_out_length;
1903         desc->data_ptrs[next_triplet - 1].last = 1;
1904         desc->d2mlen = next_triplet - desc->m2dlen;
1905
1906         desc->op_addr = op;
1907
1908         return 0;
1909 }
1910
1911 static inline void
1912 acc100_dma_desc_ld_update(struct rte_bbdev_dec_op *op,
1913                 struct acc100_dma_req_desc *desc,
1914                 struct rte_mbuf *input, struct rte_mbuf *h_output,
1915                 uint32_t *in_offset, uint32_t *h_out_offset,
1916                 uint32_t *h_out_length,
1917                 union acc100_harq_layout_data *harq_layout)
1918 {
1919         int next_triplet = 1; /* FCW already done */
1920         desc->data_ptrs[next_triplet].address =
1921                         rte_pktmbuf_iova_offset(input, *in_offset);
1922         next_triplet++;
1923
1924         if (check_bit(op->ldpc_dec.op_flags,
1925                                 RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) {
1926                 struct rte_bbdev_op_data hi = op->ldpc_dec.harq_combined_input;
1927                 desc->data_ptrs[next_triplet].address = hi.offset;
1928 #ifndef ACC100_EXT_MEM
1929                 desc->data_ptrs[next_triplet].address =
1930                                 rte_pktmbuf_iova_offset(hi.data, hi.offset);
1931 #endif
1932                 next_triplet++;
1933         }
1934
1935         desc->data_ptrs[next_triplet].address =
1936                         rte_pktmbuf_iova_offset(h_output, *h_out_offset);
1937         *h_out_length = desc->data_ptrs[next_triplet].blen;
1938         next_triplet++;
1939
1940         if (check_bit(op->ldpc_dec.op_flags,
1941                                 RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
1942                 desc->data_ptrs[next_triplet].address =
1943                                 op->ldpc_dec.harq_combined_output.offset;
1944                 /* Adjust based on previous operation */
1945                 struct rte_bbdev_dec_op *prev_op = desc->op_addr;
1946                 op->ldpc_dec.harq_combined_output.length =
1947                                 prev_op->ldpc_dec.harq_combined_output.length;
1948                 int16_t hq_idx = op->ldpc_dec.harq_combined_output.offset /
1949                                 ACC100_HARQ_OFFSET;
1950                 int16_t prev_hq_idx =
1951                                 prev_op->ldpc_dec.harq_combined_output.offset
1952                                 / ACC100_HARQ_OFFSET;
1953                 harq_layout[hq_idx].val = harq_layout[prev_hq_idx].val;
1954 #ifndef ACC100_EXT_MEM
1955                 struct rte_bbdev_op_data ho =
1956                                 op->ldpc_dec.harq_combined_output;
1957                 desc->data_ptrs[next_triplet].address =
1958                                 rte_pktmbuf_iova_offset(ho.data, ho.offset);
1959 #endif
1960                 next_triplet++;
1961         }
1962
1963         op->ldpc_dec.hard_output.length += *h_out_length;
1964         desc->op_addr = op;
1965 }
1966
1967
1968 /* Enqueue a number of operations to HW and update software rings */
1969 static inline void
1970 acc100_dma_enqueue(struct acc100_queue *q, uint16_t n,
1971                 struct rte_bbdev_stats *queue_stats)
1972 {
1973         union acc100_enqueue_reg_fmt enq_req;
1974 #ifdef RTE_BBDEV_OFFLOAD_COST
1975         uint64_t start_time = 0;
1976         queue_stats->acc_offload_cycles = 0;
1977 #else
1978         RTE_SET_USED(queue_stats);
1979 #endif
1980
1981         enq_req.val = 0;
1982         /* Setting offset, 100b for 256 DMA Desc */
1983         enq_req.addr_offset = ACC100_DESC_OFFSET;
1984
1985         /* Split ops into batches */
1986         do {
1987                 union acc100_dma_desc *desc;
1988                 uint16_t enq_batch_size;
1989                 uint64_t offset;
1990                 rte_iova_t req_elem_addr;
1991
1992                 enq_batch_size = RTE_MIN(n, MAX_ENQ_BATCH_SIZE);
1993
1994                 /* Set flag on last descriptor in a batch */
1995                 desc = q->ring_addr + ((q->sw_ring_head + enq_batch_size - 1) &
1996                                 q->sw_ring_wrap_mask);
1997                 desc->req.last_desc_in_batch = 1;
1998
1999                 /* Calculate the 1st descriptor's address */
2000                 offset = ((q->sw_ring_head & q->sw_ring_wrap_mask) *
2001                                 sizeof(union acc100_dma_desc));
2002                 req_elem_addr = q->ring_addr_iova + offset;
2003
2004                 /* Fill enqueue struct */
2005                 enq_req.num_elem = enq_batch_size;
2006                 /* low 6 bits are not needed */
2007                 enq_req.req_elem_addr = (uint32_t)(req_elem_addr >> 6);
2008
2009 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2010                 rte_memdump(stderr, "Req sdone", desc, sizeof(*desc));
2011 #endif
2012                 rte_bbdev_log_debug(
2013                                 "Enqueue %u reqs (phys %#"PRIx64") to reg %p",
2014                                 enq_batch_size,
2015                                 req_elem_addr,
2016                                 (void *)q->mmio_reg_enqueue);
2017
2018                 rte_wmb();
2019
2020 #ifdef RTE_BBDEV_OFFLOAD_COST
2021                 /* Start time measurement for enqueue function offload. */
2022                 start_time = rte_rdtsc_precise();
2023 #endif
2024                 rte_bbdev_log(DEBUG, "Debug : MMIO Enqueue");
2025                 mmio_write(q->mmio_reg_enqueue, enq_req.val);
2026
2027 #ifdef RTE_BBDEV_OFFLOAD_COST
2028                 queue_stats->acc_offload_cycles +=
2029                                 rte_rdtsc_precise() - start_time;
2030 #endif
2031
2032                 q->aq_enqueued++;
2033                 q->sw_ring_head += enq_batch_size;
2034                 n -= enq_batch_size;
2035
2036         } while (n);
2037
2038
2039 }
2040
2041 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2042 /* Validates turbo encoder parameters */
2043 static inline int
2044 validate_enc_op(struct rte_bbdev_enc_op *op)
2045 {
2046         struct rte_bbdev_op_turbo_enc *turbo_enc = &op->turbo_enc;
2047         struct rte_bbdev_op_enc_turbo_cb_params *cb = NULL;
2048         struct rte_bbdev_op_enc_turbo_tb_params *tb = NULL;
2049         uint16_t kw, kw_neg, kw_pos;
2050
2051         if (op->mempool == NULL) {
2052                 rte_bbdev_log(ERR, "Invalid mempool pointer");
2053                 return -1;
2054         }
2055         if (turbo_enc->input.data == NULL) {
2056                 rte_bbdev_log(ERR, "Invalid input pointer");
2057                 return -1;
2058         }
2059         if (turbo_enc->output.data == NULL) {
2060                 rte_bbdev_log(ERR, "Invalid output pointer");
2061                 return -1;
2062         }
2063         if (turbo_enc->rv_index > 3) {
2064                 rte_bbdev_log(ERR,
2065                                 "rv_index (%u) is out of range 0 <= value <= 3",
2066                                 turbo_enc->rv_index);
2067                 return -1;
2068         }
2069         if (turbo_enc->code_block_mode != 0 &&
2070                         turbo_enc->code_block_mode != 1) {
2071                 rte_bbdev_log(ERR,
2072                                 "code_block_mode (%u) is out of range 0 <= value <= 1",
2073                                 turbo_enc->code_block_mode);
2074                 return -1;
2075         }
2076
2077         if (turbo_enc->code_block_mode == 0) {
2078                 tb = &turbo_enc->tb_params;
2079                 if ((tb->k_neg < RTE_BBDEV_TURBO_MIN_CB_SIZE
2080                                 || tb->k_neg > RTE_BBDEV_TURBO_MAX_CB_SIZE)
2081                                 && tb->c_neg > 0) {
2082                         rte_bbdev_log(ERR,
2083                                         "k_neg (%u) is out of range %u <= value <= %u",
2084                                         tb->k_neg, RTE_BBDEV_TURBO_MIN_CB_SIZE,
2085                                         RTE_BBDEV_TURBO_MAX_CB_SIZE);
2086                         return -1;
2087                 }
2088                 if (tb->k_pos < RTE_BBDEV_TURBO_MIN_CB_SIZE
2089                                 || tb->k_pos > RTE_BBDEV_TURBO_MAX_CB_SIZE) {
2090                         rte_bbdev_log(ERR,
2091                                         "k_pos (%u) is out of range %u <= value <= %u",
2092                                         tb->k_pos, RTE_BBDEV_TURBO_MIN_CB_SIZE,
2093                                         RTE_BBDEV_TURBO_MAX_CB_SIZE);
2094                         return -1;
2095                 }
2096                 if (tb->c_neg > (RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - 1))
2097                         rte_bbdev_log(ERR,
2098                                         "c_neg (%u) is out of range 0 <= value <= %u",
2099                                         tb->c_neg,
2100                                         RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - 1);
2101                 if (tb->c < 1 || tb->c > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS) {
2102                         rte_bbdev_log(ERR,
2103                                         "c (%u) is out of range 1 <= value <= %u",
2104                                         tb->c, RTE_BBDEV_TURBO_MAX_CODE_BLOCKS);
2105                         return -1;
2106                 }
2107                 if (tb->cab > tb->c) {
2108                         rte_bbdev_log(ERR,
2109                                         "cab (%u) is greater than c (%u)",
2110                                         tb->cab, tb->c);
2111                         return -1;
2112                 }
2113                 if ((tb->ea < RTE_BBDEV_TURBO_MIN_CB_SIZE || (tb->ea % 2))
2114                                 && tb->r < tb->cab) {
2115                         rte_bbdev_log(ERR,
2116                                         "ea (%u) is less than %u or it is not even",
2117                                         tb->ea, RTE_BBDEV_TURBO_MIN_CB_SIZE);
2118                         return -1;
2119                 }
2120                 if ((tb->eb < RTE_BBDEV_TURBO_MIN_CB_SIZE || (tb->eb % 2))
2121                                 && tb->c > tb->cab) {
2122                         rte_bbdev_log(ERR,
2123                                         "eb (%u) is less than %u or it is not even",
2124                                         tb->eb, RTE_BBDEV_TURBO_MIN_CB_SIZE);
2125                         return -1;
2126                 }
2127
2128                 kw_neg = 3 * RTE_ALIGN_CEIL(tb->k_neg + 4,
2129                                         RTE_BBDEV_TURBO_C_SUBBLOCK);
2130                 if (tb->ncb_neg < tb->k_neg || tb->ncb_neg > kw_neg) {
2131                         rte_bbdev_log(ERR,
2132                                         "ncb_neg (%u) is out of range (%u) k_neg <= value <= (%u) kw_neg",
2133                                         tb->ncb_neg, tb->k_neg, kw_neg);
2134                         return -1;
2135                 }
2136
2137                 kw_pos = 3 * RTE_ALIGN_CEIL(tb->k_pos + 4,
2138                                         RTE_BBDEV_TURBO_C_SUBBLOCK);
2139                 if (tb->ncb_pos < tb->k_pos || tb->ncb_pos > kw_pos) {
2140                         rte_bbdev_log(ERR,
2141                                         "ncb_pos (%u) is out of range (%u) k_pos <= value <= (%u) kw_pos",
2142                                         tb->ncb_pos, tb->k_pos, kw_pos);
2143                         return -1;
2144                 }
2145                 if (tb->r > (tb->c - 1)) {
2146                         rte_bbdev_log(ERR,
2147                                         "r (%u) is greater than c - 1 (%u)",
2148                                         tb->r, tb->c - 1);
2149                         return -1;
2150                 }
2151         } else {
2152                 cb = &turbo_enc->cb_params;
2153                 if (cb->k < RTE_BBDEV_TURBO_MIN_CB_SIZE
2154                                 || cb->k > RTE_BBDEV_TURBO_MAX_CB_SIZE) {
2155                         rte_bbdev_log(ERR,
2156                                         "k (%u) is out of range %u <= value <= %u",
2157                                         cb->k, RTE_BBDEV_TURBO_MIN_CB_SIZE,
2158                                         RTE_BBDEV_TURBO_MAX_CB_SIZE);
2159                         return -1;
2160                 }
2161
2162                 if (cb->e < RTE_BBDEV_TURBO_MIN_CB_SIZE || (cb->e % 2)) {
2163                         rte_bbdev_log(ERR,
2164                                         "e (%u) is less than %u or it is not even",
2165                                         cb->e, RTE_BBDEV_TURBO_MIN_CB_SIZE);
2166                         return -1;
2167                 }
2168
2169                 kw = RTE_ALIGN_CEIL(cb->k + 4, RTE_BBDEV_TURBO_C_SUBBLOCK) * 3;
2170                 if (cb->ncb < cb->k || cb->ncb > kw) {
2171                         rte_bbdev_log(ERR,
2172                                         "ncb (%u) is out of range (%u) k <= value <= (%u) kw",
2173                                         cb->ncb, cb->k, kw);
2174                         return -1;
2175                 }
2176         }
2177
2178         return 0;
2179 }
2180 /* Validates LDPC encoder parameters */
2181 static inline int
2182 validate_ldpc_enc_op(struct rte_bbdev_enc_op *op)
2183 {
2184         struct rte_bbdev_op_ldpc_enc *ldpc_enc = &op->ldpc_enc;
2185
2186         if (op->mempool == NULL) {
2187                 rte_bbdev_log(ERR, "Invalid mempool pointer");
2188                 return -1;
2189         }
2190         if (ldpc_enc->input.data == NULL) {
2191                 rte_bbdev_log(ERR, "Invalid input pointer");
2192                 return -1;
2193         }
2194         if (ldpc_enc->output.data == NULL) {
2195                 rte_bbdev_log(ERR, "Invalid output pointer");
2196                 return -1;
2197         }
2198         if (ldpc_enc->input.length >
2199                         RTE_BBDEV_LDPC_MAX_CB_SIZE >> 3) {
2200                 rte_bbdev_log(ERR, "CB size (%u) is too big, max: %d",
2201                                 ldpc_enc->input.length,
2202                                 RTE_BBDEV_LDPC_MAX_CB_SIZE);
2203                 return -1;
2204         }
2205         if ((ldpc_enc->basegraph > 2) || (ldpc_enc->basegraph == 0)) {
2206                 rte_bbdev_log(ERR,
2207                                 "BG (%u) is out of range 1 <= value <= 2",
2208                                 ldpc_enc->basegraph);
2209                 return -1;
2210         }
2211         if (ldpc_enc->rv_index > 3) {
2212                 rte_bbdev_log(ERR,
2213                                 "rv_index (%u) is out of range 0 <= value <= 3",
2214                                 ldpc_enc->rv_index);
2215                 return -1;
2216         }
2217         if (ldpc_enc->code_block_mode > 1) {
2218                 rte_bbdev_log(ERR,
2219                                 "code_block_mode (%u) is out of range 0 <= value <= 1",
2220                                 ldpc_enc->code_block_mode);
2221                 return -1;
2222         }
2223         int K = (ldpc_enc->basegraph == 1 ? 22 : 10) * ldpc_enc->z_c;
2224         if (ldpc_enc->n_filler >= K) {
2225                 rte_bbdev_log(ERR,
2226                                 "K and F are not compatible %u %u",
2227                                 K, ldpc_enc->n_filler);
2228                 return -1;
2229         }
2230         return 0;
2231 }
2232
2233 /* Validates LDPC decoder parameters */
2234 static inline int
2235 validate_ldpc_dec_op(struct rte_bbdev_dec_op *op)
2236 {
2237         struct rte_bbdev_op_ldpc_dec *ldpc_dec = &op->ldpc_dec;
2238
2239         if (op->mempool == NULL) {
2240                 rte_bbdev_log(ERR, "Invalid mempool pointer");
2241                 return -1;
2242         }
2243         if ((ldpc_dec->basegraph > 2) || (ldpc_dec->basegraph == 0)) {
2244                 rte_bbdev_log(ERR,
2245                                 "BG (%u) is out of range 1 <= value <= 2",
2246                                 ldpc_dec->basegraph);
2247                 return -1;
2248         }
2249         if (ldpc_dec->iter_max == 0) {
2250                 rte_bbdev_log(ERR,
2251                                 "iter_max (%u) is equal to 0",
2252                                 ldpc_dec->iter_max);
2253                 return -1;
2254         }
2255         if (ldpc_dec->rv_index > 3) {
2256                 rte_bbdev_log(ERR,
2257                                 "rv_index (%u) is out of range 0 <= value <= 3",
2258                                 ldpc_dec->rv_index);
2259                 return -1;
2260         }
2261         if (ldpc_dec->code_block_mode > 1) {
2262                 rte_bbdev_log(ERR,
2263                                 "code_block_mode (%u) is out of range 0 <= value <= 1",
2264                                 ldpc_dec->code_block_mode);
2265                 return -1;
2266         }
2267         int K = (ldpc_dec->basegraph == 1 ? 22 : 10) * ldpc_dec->z_c;
2268         if (ldpc_dec->n_filler >= K) {
2269                 rte_bbdev_log(ERR,
2270                                 "K and F are not compatible %u %u",
2271                                 K, ldpc_dec->n_filler);
2272                 return -1;
2273         }
2274         return 0;
2275 }
2276 #endif
2277
2278 /* Enqueue one encode operations for ACC100 device in CB mode */
2279 static inline int
2280 enqueue_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
2281                 uint16_t total_enqueued_cbs)
2282 {
2283         union acc100_dma_desc *desc = NULL;
2284         int ret;
2285         uint32_t in_offset, out_offset, out_length, mbuf_total_left,
2286                 seg_total_left;
2287         struct rte_mbuf *input, *output_head, *output;
2288
2289 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2290         /* Validate op structure */
2291         if (validate_enc_op(op) == -1) {
2292                 rte_bbdev_log(ERR, "Turbo encoder validation failed");
2293                 return -EINVAL;
2294         }
2295 #endif
2296
2297         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2298                         & q->sw_ring_wrap_mask);
2299         desc = q->ring_addr + desc_idx;
2300         acc100_fcw_te_fill(op, &desc->req.fcw_te);
2301
2302         input = op->turbo_enc.input.data;
2303         output_head = output = op->turbo_enc.output.data;
2304         in_offset = op->turbo_enc.input.offset;
2305         out_offset = op->turbo_enc.output.offset;
2306         out_length = 0;
2307         mbuf_total_left = op->turbo_enc.input.length;
2308         seg_total_left = rte_pktmbuf_data_len(op->turbo_enc.input.data)
2309                         - in_offset;
2310
2311         ret = acc100_dma_desc_te_fill(op, &desc->req, &input, output,
2312                         &in_offset, &out_offset, &out_length, &mbuf_total_left,
2313                         &seg_total_left, 0);
2314
2315         if (unlikely(ret < 0))
2316                 return ret;
2317
2318         mbuf_append(output_head, output, out_length);
2319
2320 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2321         rte_memdump(stderr, "FCW", &desc->req.fcw_te,
2322                         sizeof(desc->req.fcw_te) - 8);
2323         rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
2324         if (check_mbuf_total_left(mbuf_total_left) != 0)
2325                 return -EINVAL;
2326 #endif
2327         /* One CB (one op) was successfully prepared to enqueue */
2328         return 1;
2329 }
2330
2331 /* Enqueue one encode operations for ACC100 device in CB mode */
2332 static inline int
2333 enqueue_ldpc_enc_n_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ops,
2334                 uint16_t total_enqueued_cbs, int16_t num)
2335 {
2336         union acc100_dma_desc *desc = NULL;
2337         uint32_t out_length;
2338         struct rte_mbuf *output_head, *output;
2339         int i, next_triplet;
2340         uint16_t  in_length_in_bytes;
2341         struct rte_bbdev_op_ldpc_enc *enc = &ops[0]->ldpc_enc;
2342
2343 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2344         /* Validate op structure */
2345         if (validate_ldpc_enc_op(ops[0]) == -1) {
2346                 rte_bbdev_log(ERR, "LDPC encoder validation failed");
2347                 return -EINVAL;
2348         }
2349 #endif
2350
2351         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2352                         & q->sw_ring_wrap_mask);
2353         desc = q->ring_addr + desc_idx;
2354         acc100_fcw_le_fill(ops[0], &desc->req.fcw_le, num);
2355
2356         /** This could be done at polling */
2357         acc100_header_init(&desc->req);
2358         desc->req.numCBs = num;
2359
2360         in_length_in_bytes = ops[0]->ldpc_enc.input.data->data_len;
2361         out_length = (enc->cb_params.e + 7) >> 3;
2362         desc->req.m2dlen = 1 + num;
2363         desc->req.d2mlen = num;
2364         next_triplet = 1;
2365
2366         for (i = 0; i < num; i++) {
2367                 desc->req.data_ptrs[next_triplet].address =
2368                         rte_pktmbuf_iova_offset(ops[i]->ldpc_enc.input.data, 0);
2369                 desc->req.data_ptrs[next_triplet].blen = in_length_in_bytes;
2370                 next_triplet++;
2371                 desc->req.data_ptrs[next_triplet].address =
2372                                 rte_pktmbuf_iova_offset(
2373                                 ops[i]->ldpc_enc.output.data, 0);
2374                 desc->req.data_ptrs[next_triplet].blen = out_length;
2375                 next_triplet++;
2376                 ops[i]->ldpc_enc.output.length = out_length;
2377                 output_head = output = ops[i]->ldpc_enc.output.data;
2378                 mbuf_append(output_head, output, out_length);
2379                 output->data_len = out_length;
2380         }
2381
2382         desc->req.op_addr = ops[0];
2383
2384 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2385         rte_memdump(stderr, "FCW", &desc->req.fcw_le,
2386                         sizeof(desc->req.fcw_le) - 8);
2387         rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
2388 #endif
2389
2390         /* One CB (one op) was successfully prepared to enqueue */
2391         return num;
2392 }
2393
2394 /* Enqueue one encode operations for ACC100 device in CB mode */
2395 static inline int
2396 enqueue_ldpc_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
2397                 uint16_t total_enqueued_cbs)
2398 {
2399         union acc100_dma_desc *desc = NULL;
2400         int ret;
2401         uint32_t in_offset, out_offset, out_length, mbuf_total_left,
2402                 seg_total_left;
2403         struct rte_mbuf *input, *output_head, *output;
2404
2405 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2406         /* Validate op structure */
2407         if (validate_ldpc_enc_op(op) == -1) {
2408                 rte_bbdev_log(ERR, "LDPC encoder validation failed");
2409                 return -EINVAL;
2410         }
2411 #endif
2412
2413         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2414                         & q->sw_ring_wrap_mask);
2415         desc = q->ring_addr + desc_idx;
2416         acc100_fcw_le_fill(op, &desc->req.fcw_le, 1);
2417
2418         input = op->ldpc_enc.input.data;
2419         output_head = output = op->ldpc_enc.output.data;
2420         in_offset = op->ldpc_enc.input.offset;
2421         out_offset = op->ldpc_enc.output.offset;
2422         out_length = 0;
2423         mbuf_total_left = op->ldpc_enc.input.length;
2424         seg_total_left = rte_pktmbuf_data_len(op->ldpc_enc.input.data)
2425                         - in_offset;
2426
2427         ret = acc100_dma_desc_le_fill(op, &desc->req, &input, output,
2428                         &in_offset, &out_offset, &out_length, &mbuf_total_left,
2429                         &seg_total_left);
2430
2431         if (unlikely(ret < 0))
2432                 return ret;
2433
2434         mbuf_append(output_head, output, out_length);
2435
2436 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2437         rte_memdump(stderr, "FCW", &desc->req.fcw_le,
2438                         sizeof(desc->req.fcw_le) - 8);
2439         rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
2440
2441         if (check_mbuf_total_left(mbuf_total_left) != 0)
2442                 return -EINVAL;
2443 #endif
2444         /* One CB (one op) was successfully prepared to enqueue */
2445         return 1;
2446 }
2447
2448
2449 /* Enqueue one encode operations for ACC100 device in TB mode. */
2450 static inline int
2451 enqueue_enc_one_op_tb(struct acc100_queue *q, struct rte_bbdev_enc_op *op,
2452                 uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
2453 {
2454         union acc100_dma_desc *desc = NULL;
2455         int ret;
2456         uint8_t r, c;
2457         uint32_t in_offset, out_offset, out_length, mbuf_total_left,
2458                 seg_total_left;
2459         struct rte_mbuf *input, *output_head, *output;
2460         uint16_t current_enqueued_cbs = 0;
2461
2462 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2463         /* Validate op structure */
2464         if (validate_enc_op(op) == -1) {
2465                 rte_bbdev_log(ERR, "Turbo encoder validation failed");
2466                 return -EINVAL;
2467         }
2468 #endif
2469
2470         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2471                         & q->sw_ring_wrap_mask);
2472         desc = q->ring_addr + desc_idx;
2473         uint64_t fcw_offset = (desc_idx << 8) + ACC100_DESC_FCW_OFFSET;
2474         acc100_fcw_te_fill(op, &desc->req.fcw_te);
2475
2476         input = op->turbo_enc.input.data;
2477         output_head = output = op->turbo_enc.output.data;
2478         in_offset = op->turbo_enc.input.offset;
2479         out_offset = op->turbo_enc.output.offset;
2480         out_length = 0;
2481         mbuf_total_left = op->turbo_enc.input.length;
2482
2483         c = op->turbo_enc.tb_params.c;
2484         r = op->turbo_enc.tb_params.r;
2485
2486         while (mbuf_total_left > 0 && r < c) {
2487                 seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
2488                 /* Set up DMA descriptor */
2489                 desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
2490                                 & q->sw_ring_wrap_mask);
2491                 desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
2492                 desc->req.data_ptrs[0].blen = ACC100_FCW_TE_BLEN;
2493
2494                 ret = acc100_dma_desc_te_fill(op, &desc->req, &input, output,
2495                                 &in_offset, &out_offset, &out_length,
2496                                 &mbuf_total_left, &seg_total_left, r);
2497                 if (unlikely(ret < 0))
2498                         return ret;
2499                 mbuf_append(output_head, output, out_length);
2500
2501                 /* Set total number of CBs in TB */
2502                 desc->req.cbs_in_tb = cbs_in_tb;
2503 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2504                 rte_memdump(stderr, "FCW", &desc->req.fcw_te,
2505                                 sizeof(desc->req.fcw_te) - 8);
2506                 rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
2507 #endif
2508
2509                 if (seg_total_left == 0) {
2510                         /* Go to the next mbuf */
2511                         input = input->next;
2512                         in_offset = 0;
2513                         output = output->next;
2514                         out_offset = 0;
2515                 }
2516
2517                 total_enqueued_cbs++;
2518                 current_enqueued_cbs++;
2519                 r++;
2520         }
2521
2522         if (unlikely(desc == NULL))
2523                 return current_enqueued_cbs;
2524
2525 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2526         if (check_mbuf_total_left(mbuf_total_left) != 0)
2527                 return -EINVAL;
2528 #endif
2529
2530         /* Set SDone on last CB descriptor for TB mode. */
2531         desc->req.sdone_enable = 1;
2532         desc->req.irq_enable = q->irq_enable;
2533
2534         return current_enqueued_cbs;
2535 }
2536
2537 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2538 /* Validates turbo decoder parameters */
2539 static inline int
2540 validate_dec_op(struct rte_bbdev_dec_op *op)
2541 {
2542         struct rte_bbdev_op_turbo_dec *turbo_dec = &op->turbo_dec;
2543         struct rte_bbdev_op_dec_turbo_cb_params *cb = NULL;
2544         struct rte_bbdev_op_dec_turbo_tb_params *tb = NULL;
2545
2546         if (op->mempool == NULL) {
2547                 rte_bbdev_log(ERR, "Invalid mempool pointer");
2548                 return -1;
2549         }
2550         if (turbo_dec->input.data == NULL) {
2551                 rte_bbdev_log(ERR, "Invalid input pointer");
2552                 return -1;
2553         }
2554         if (turbo_dec->hard_output.data == NULL) {
2555                 rte_bbdev_log(ERR, "Invalid hard_output pointer");
2556                 return -1;
2557         }
2558         if (check_bit(turbo_dec->op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT) &&
2559                         turbo_dec->soft_output.data == NULL) {
2560                 rte_bbdev_log(ERR, "Invalid soft_output pointer");
2561                 return -1;
2562         }
2563         if (turbo_dec->rv_index > 3) {
2564                 rte_bbdev_log(ERR,
2565                                 "rv_index (%u) is out of range 0 <= value <= 3",
2566                                 turbo_dec->rv_index);
2567                 return -1;
2568         }
2569         if (turbo_dec->iter_min < 1) {
2570                 rte_bbdev_log(ERR,
2571                                 "iter_min (%u) is less than 1",
2572                                 turbo_dec->iter_min);
2573                 return -1;
2574         }
2575         if (turbo_dec->iter_max <= 2) {
2576                 rte_bbdev_log(ERR,
2577                                 "iter_max (%u) is less than or equal to 2",
2578                                 turbo_dec->iter_max);
2579                 return -1;
2580         }
2581         if (turbo_dec->iter_min > turbo_dec->iter_max) {
2582                 rte_bbdev_log(ERR,
2583                                 "iter_min (%u) is greater than iter_max (%u)",
2584                                 turbo_dec->iter_min, turbo_dec->iter_max);
2585                 return -1;
2586         }
2587         if (turbo_dec->code_block_mode != 0 &&
2588                         turbo_dec->code_block_mode != 1) {
2589                 rte_bbdev_log(ERR,
2590                                 "code_block_mode (%u) is out of range 0 <= value <= 1",
2591                                 turbo_dec->code_block_mode);
2592                 return -1;
2593         }
2594
2595         if (turbo_dec->code_block_mode == 0) {
2596                 tb = &turbo_dec->tb_params;
2597                 if ((tb->k_neg < RTE_BBDEV_TURBO_MIN_CB_SIZE
2598                                 || tb->k_neg > RTE_BBDEV_TURBO_MAX_CB_SIZE)
2599                                 && tb->c_neg > 0) {
2600                         rte_bbdev_log(ERR,
2601                                         "k_neg (%u) is out of range %u <= value <= %u",
2602                                         tb->k_neg, RTE_BBDEV_TURBO_MIN_CB_SIZE,
2603                                         RTE_BBDEV_TURBO_MAX_CB_SIZE);
2604                         return -1;
2605                 }
2606                 if ((tb->k_pos < RTE_BBDEV_TURBO_MIN_CB_SIZE
2607                                 || tb->k_pos > RTE_BBDEV_TURBO_MAX_CB_SIZE)
2608                                 && tb->c > tb->c_neg) {
2609                         rte_bbdev_log(ERR,
2610                                         "k_pos (%u) is out of range %u <= value <= %u",
2611                                         tb->k_pos, RTE_BBDEV_TURBO_MIN_CB_SIZE,
2612                                         RTE_BBDEV_TURBO_MAX_CB_SIZE);
2613                         return -1;
2614                 }
2615                 if (tb->c_neg > (RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - 1))
2616                         rte_bbdev_log(ERR,
2617                                         "c_neg (%u) is out of range 0 <= value <= %u",
2618                                         tb->c_neg,
2619                                         RTE_BBDEV_TURBO_MAX_CODE_BLOCKS - 1);
2620                 if (tb->c < 1 || tb->c > RTE_BBDEV_TURBO_MAX_CODE_BLOCKS) {
2621                         rte_bbdev_log(ERR,
2622                                         "c (%u) is out of range 1 <= value <= %u",
2623                                         tb->c, RTE_BBDEV_TURBO_MAX_CODE_BLOCKS);
2624                         return -1;
2625                 }
2626                 if (tb->cab > tb->c) {
2627                         rte_bbdev_log(ERR,
2628                                         "cab (%u) is greater than c (%u)",
2629                                         tb->cab, tb->c);
2630                         return -1;
2631                 }
2632                 if (check_bit(turbo_dec->op_flags, RTE_BBDEV_TURBO_EQUALIZER) &&
2633                                 (tb->ea < RTE_BBDEV_TURBO_MIN_CB_SIZE
2634                                                 || (tb->ea % 2))
2635                                 && tb->cab > 0) {
2636                         rte_bbdev_log(ERR,
2637                                         "ea (%u) is less than %u or it is not even",
2638                                         tb->ea, RTE_BBDEV_TURBO_MIN_CB_SIZE);
2639                         return -1;
2640                 }
2641                 if (check_bit(turbo_dec->op_flags, RTE_BBDEV_TURBO_EQUALIZER) &&
2642                                 (tb->eb < RTE_BBDEV_TURBO_MIN_CB_SIZE
2643                                                 || (tb->eb % 2))
2644                                 && tb->c > tb->cab) {
2645                         rte_bbdev_log(ERR,
2646                                         "eb (%u) is less than %u or it is not even",
2647                                         tb->eb, RTE_BBDEV_TURBO_MIN_CB_SIZE);
2648                 }
2649         } else {
2650                 cb = &turbo_dec->cb_params;
2651                 if (cb->k < RTE_BBDEV_TURBO_MIN_CB_SIZE
2652                                 || cb->k > RTE_BBDEV_TURBO_MAX_CB_SIZE) {
2653                         rte_bbdev_log(ERR,
2654                                         "k (%u) is out of range %u <= value <= %u",
2655                                         cb->k, RTE_BBDEV_TURBO_MIN_CB_SIZE,
2656                                         RTE_BBDEV_TURBO_MAX_CB_SIZE);
2657                         return -1;
2658                 }
2659                 if (check_bit(turbo_dec->op_flags, RTE_BBDEV_TURBO_EQUALIZER) &&
2660                                 (cb->e < RTE_BBDEV_TURBO_MIN_CB_SIZE ||
2661                                 (cb->e % 2))) {
2662                         rte_bbdev_log(ERR,
2663                                         "e (%u) is less than %u or it is not even",
2664                                         cb->e, RTE_BBDEV_TURBO_MIN_CB_SIZE);
2665                         return -1;
2666                 }
2667         }
2668
2669         return 0;
2670 }
2671 #endif
2672
2673 /** Enqueue one decode operations for ACC100 device in CB mode */
2674 static inline int
2675 enqueue_dec_one_op_cb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
2676                 uint16_t total_enqueued_cbs)
2677 {
2678         union acc100_dma_desc *desc = NULL;
2679         int ret;
2680         uint32_t in_offset, h_out_offset, s_out_offset, s_out_length,
2681                 h_out_length, mbuf_total_left, seg_total_left;
2682         struct rte_mbuf *input, *h_output_head, *h_output,
2683                 *s_output_head, *s_output;
2684
2685 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2686         /* Validate op structure */
2687         if (validate_dec_op(op) == -1) {
2688                 rte_bbdev_log(ERR, "Turbo decoder validation failed");
2689                 return -EINVAL;
2690         }
2691 #endif
2692
2693         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2694                         & q->sw_ring_wrap_mask);
2695         desc = q->ring_addr + desc_idx;
2696         acc100_fcw_td_fill(op, &desc->req.fcw_td);
2697
2698         input = op->turbo_dec.input.data;
2699         h_output_head = h_output = op->turbo_dec.hard_output.data;
2700         s_output_head = s_output = op->turbo_dec.soft_output.data;
2701         in_offset = op->turbo_dec.input.offset;
2702         h_out_offset = op->turbo_dec.hard_output.offset;
2703         s_out_offset = op->turbo_dec.soft_output.offset;
2704         h_out_length = s_out_length = 0;
2705         mbuf_total_left = op->turbo_dec.input.length;
2706         seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
2707
2708 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2709         if (unlikely(input == NULL)) {
2710                 rte_bbdev_log(ERR, "Invalid mbuf pointer");
2711                 return -EFAULT;
2712         }
2713 #endif
2714
2715         /* Set up DMA descriptor */
2716         desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
2717                         & q->sw_ring_wrap_mask);
2718
2719         ret = acc100_dma_desc_td_fill(op, &desc->req, &input, h_output,
2720                         s_output, &in_offset, &h_out_offset, &s_out_offset,
2721                         &h_out_length, &s_out_length, &mbuf_total_left,
2722                         &seg_total_left, 0);
2723
2724         if (unlikely(ret < 0))
2725                 return ret;
2726
2727         /* Hard output */
2728         mbuf_append(h_output_head, h_output, h_out_length);
2729
2730         /* Soft output */
2731         if (check_bit(op->turbo_dec.op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT))
2732                 mbuf_append(s_output_head, s_output, s_out_length);
2733
2734 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2735         rte_memdump(stderr, "FCW", &desc->req.fcw_td,
2736                         sizeof(desc->req.fcw_td) - 8);
2737         rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
2738         if (check_mbuf_total_left(mbuf_total_left) != 0)
2739                 return -EINVAL;
2740 #endif
2741
2742         /* One CB (one op) was successfully prepared to enqueue */
2743         return 1;
2744 }
2745
2746 static inline int
2747 harq_loopback(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
2748                 uint16_t total_enqueued_cbs) {
2749         struct acc100_fcw_ld *fcw;
2750         union acc100_dma_desc *desc;
2751         int next_triplet = 1;
2752         struct rte_mbuf *hq_output_head, *hq_output;
2753         uint16_t harq_dma_length_in, harq_dma_length_out;
2754         uint16_t harq_in_length = op->ldpc_dec.harq_combined_input.length;
2755         if (harq_in_length == 0) {
2756                 rte_bbdev_log(ERR, "Loopback of invalid null size\n");
2757                 return -EINVAL;
2758         }
2759
2760         int h_comp = check_bit(op->ldpc_dec.op_flags,
2761                         RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION
2762                         ) ? 1 : 0;
2763         if (h_comp == 1) {
2764                 harq_in_length = harq_in_length * 8 / 6;
2765                 harq_in_length = RTE_ALIGN(harq_in_length, 64);
2766                 harq_dma_length_in = harq_in_length * 6 / 8;
2767         } else {
2768                 harq_in_length = RTE_ALIGN(harq_in_length, 64);
2769                 harq_dma_length_in = harq_in_length;
2770         }
2771         harq_dma_length_out = harq_dma_length_in;
2772
2773         bool ddr_mem_in = check_bit(op->ldpc_dec.op_flags,
2774                         RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE);
2775         union acc100_harq_layout_data *harq_layout = q->d->harq_layout;
2776         uint16_t harq_index = (ddr_mem_in ?
2777                         op->ldpc_dec.harq_combined_input.offset :
2778                         op->ldpc_dec.harq_combined_output.offset)
2779                         / ACC100_HARQ_OFFSET;
2780
2781         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2782                         & q->sw_ring_wrap_mask);
2783         desc = q->ring_addr + desc_idx;
2784         fcw = &desc->req.fcw_ld;
2785         /* Set the FCW from loopback into DDR */
2786         memset(fcw, 0, sizeof(struct acc100_fcw_ld));
2787         fcw->FCWversion = ACC100_FCW_VER;
2788         fcw->qm = 2;
2789         fcw->Zc = 384;
2790         if (harq_in_length < 16 * ACC100_N_ZC_1)
2791                 fcw->Zc = 16;
2792         fcw->ncb = fcw->Zc * ACC100_N_ZC_1;
2793         fcw->rm_e = 2;
2794         fcw->hcin_en = 1;
2795         fcw->hcout_en = 1;
2796
2797         rte_bbdev_log(DEBUG, "Loopback IN %d Index %d offset %d length %d %d\n",
2798                         ddr_mem_in, harq_index,
2799                         harq_layout[harq_index].offset, harq_in_length,
2800                         harq_dma_length_in);
2801
2802         if (ddr_mem_in && (harq_layout[harq_index].offset > 0)) {
2803                 fcw->hcin_size0 = harq_layout[harq_index].size0;
2804                 fcw->hcin_offset = harq_layout[harq_index].offset;
2805                 fcw->hcin_size1 = harq_in_length - fcw->hcin_offset;
2806                 harq_dma_length_in = (fcw->hcin_size0 + fcw->hcin_size1);
2807                 if (h_comp == 1)
2808                         harq_dma_length_in = harq_dma_length_in * 6 / 8;
2809         } else {
2810                 fcw->hcin_size0 = harq_in_length;
2811         }
2812         harq_layout[harq_index].val = 0;
2813         rte_bbdev_log(DEBUG, "Loopback FCW Config %d %d %d\n",
2814                         fcw->hcin_size0, fcw->hcin_offset, fcw->hcin_size1);
2815         fcw->hcout_size0 = harq_in_length;
2816         fcw->hcin_decomp_mode = h_comp;
2817         fcw->hcout_comp_mode = h_comp;
2818         fcw->gain_i = 1;
2819         fcw->gain_h = 1;
2820
2821         /* Set the prefix of descriptor. This could be done at polling */
2822         acc100_header_init(&desc->req);
2823
2824         /* Null LLR input for Decoder */
2825         desc->req.data_ptrs[next_triplet].address =
2826                         q->lb_in_addr_iova;
2827         desc->req.data_ptrs[next_triplet].blen = 2;
2828         desc->req.data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_IN;
2829         desc->req.data_ptrs[next_triplet].last = 0;
2830         desc->req.data_ptrs[next_triplet].dma_ext = 0;
2831         next_triplet++;
2832
2833         /* HARQ Combine input from either Memory interface */
2834         if (!ddr_mem_in) {
2835                 next_triplet = acc100_dma_fill_blk_type_out(&desc->req,
2836                                 op->ldpc_dec.harq_combined_input.data,
2837                                 op->ldpc_dec.harq_combined_input.offset,
2838                                 harq_dma_length_in,
2839                                 next_triplet,
2840                                 ACC100_DMA_BLKID_IN_HARQ);
2841         } else {
2842                 desc->req.data_ptrs[next_triplet].address =
2843                                 op->ldpc_dec.harq_combined_input.offset;
2844                 desc->req.data_ptrs[next_triplet].blen =
2845                                 harq_dma_length_in;
2846                 desc->req.data_ptrs[next_triplet].blkid =
2847                                 ACC100_DMA_BLKID_IN_HARQ;
2848                 desc->req.data_ptrs[next_triplet].dma_ext = 1;
2849                 next_triplet++;
2850         }
2851         desc->req.data_ptrs[next_triplet - 1].last = 1;
2852         desc->req.m2dlen = next_triplet;
2853
2854         /* Dropped decoder hard output */
2855         desc->req.data_ptrs[next_triplet].address =
2856                         q->lb_out_addr_iova;
2857         desc->req.data_ptrs[next_triplet].blen = ACC100_BYTES_IN_WORD;
2858         desc->req.data_ptrs[next_triplet].blkid = ACC100_DMA_BLKID_OUT_HARD;
2859         desc->req.data_ptrs[next_triplet].last = 0;
2860         desc->req.data_ptrs[next_triplet].dma_ext = 0;
2861         next_triplet++;
2862
2863         /* HARQ Combine output to either Memory interface */
2864         if (check_bit(op->ldpc_dec.op_flags,
2865                         RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE
2866                         )) {
2867                 desc->req.data_ptrs[next_triplet].address =
2868                                 op->ldpc_dec.harq_combined_output.offset;
2869                 desc->req.data_ptrs[next_triplet].blen =
2870                                 harq_dma_length_out;
2871                 desc->req.data_ptrs[next_triplet].blkid =
2872                                 ACC100_DMA_BLKID_OUT_HARQ;
2873                 desc->req.data_ptrs[next_triplet].dma_ext = 1;
2874                 next_triplet++;
2875         } else {
2876                 hq_output_head = op->ldpc_dec.harq_combined_output.data;
2877                 hq_output = op->ldpc_dec.harq_combined_output.data;
2878                 next_triplet = acc100_dma_fill_blk_type_out(
2879                                 &desc->req,
2880                                 op->ldpc_dec.harq_combined_output.data,
2881                                 op->ldpc_dec.harq_combined_output.offset,
2882                                 harq_dma_length_out,
2883                                 next_triplet,
2884                                 ACC100_DMA_BLKID_OUT_HARQ);
2885                 /* HARQ output */
2886                 mbuf_append(hq_output_head, hq_output, harq_dma_length_out);
2887                 op->ldpc_dec.harq_combined_output.length =
2888                                 harq_dma_length_out;
2889         }
2890         desc->req.data_ptrs[next_triplet - 1].last = 1;
2891         desc->req.d2mlen = next_triplet - desc->req.m2dlen;
2892         desc->req.op_addr = op;
2893
2894         /* One CB (one op) was successfully prepared to enqueue */
2895         return 1;
2896 }
2897
2898 /** Enqueue one decode operations for ACC100 device in CB mode */
2899 static inline int
2900 enqueue_ldpc_dec_one_op_cb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
2901                 uint16_t total_enqueued_cbs, bool same_op)
2902 {
2903         int ret;
2904         if (unlikely(check_bit(op->ldpc_dec.op_flags,
2905                         RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK))) {
2906                 ret = harq_loopback(q, op, total_enqueued_cbs);
2907                 return ret;
2908         }
2909
2910 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2911         /* Validate op structure */
2912         if (validate_ldpc_dec_op(op) == -1) {
2913                 rte_bbdev_log(ERR, "LDPC decoder validation failed");
2914                 return -EINVAL;
2915         }
2916 #endif
2917         union acc100_dma_desc *desc;
2918         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
2919                         & q->sw_ring_wrap_mask);
2920         desc = q->ring_addr + desc_idx;
2921         struct rte_mbuf *input, *h_output_head, *h_output;
2922         uint32_t in_offset, h_out_offset, mbuf_total_left, h_out_length = 0;
2923         input = op->ldpc_dec.input.data;
2924         h_output_head = h_output = op->ldpc_dec.hard_output.data;
2925         in_offset = op->ldpc_dec.input.offset;
2926         h_out_offset = op->ldpc_dec.hard_output.offset;
2927         mbuf_total_left = op->ldpc_dec.input.length;
2928 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2929         if (unlikely(input == NULL)) {
2930                 rte_bbdev_log(ERR, "Invalid mbuf pointer");
2931                 return -EFAULT;
2932         }
2933 #endif
2934         union acc100_harq_layout_data *harq_layout = q->d->harq_layout;
2935
2936         if (same_op) {
2937                 union acc100_dma_desc *prev_desc;
2938                 desc_idx = ((q->sw_ring_head + total_enqueued_cbs - 1)
2939                                 & q->sw_ring_wrap_mask);
2940                 prev_desc = q->ring_addr + desc_idx;
2941                 uint8_t *prev_ptr = (uint8_t *) prev_desc;
2942                 uint8_t *new_ptr = (uint8_t *) desc;
2943                 /* Copy first 4 words and BDESCs */
2944                 rte_memcpy(new_ptr, prev_ptr, ACC100_5GUL_SIZE_0);
2945                 rte_memcpy(new_ptr + ACC100_5GUL_OFFSET_0,
2946                                 prev_ptr + ACC100_5GUL_OFFSET_0,
2947                                 ACC100_5GUL_SIZE_1);
2948                 desc->req.op_addr = prev_desc->req.op_addr;
2949                 /* Copy FCW */
2950                 rte_memcpy(new_ptr + ACC100_DESC_FCW_OFFSET,
2951                                 prev_ptr + ACC100_DESC_FCW_OFFSET,
2952                                 ACC100_FCW_LD_BLEN);
2953                 acc100_dma_desc_ld_update(op, &desc->req, input, h_output,
2954                                 &in_offset, &h_out_offset,
2955                                 &h_out_length, harq_layout);
2956         } else {
2957                 struct acc100_fcw_ld *fcw;
2958                 uint32_t seg_total_left;
2959                 fcw = &desc->req.fcw_ld;
2960                 acc100_fcw_ld_fill(op, fcw, harq_layout);
2961
2962                 /* Special handling when overusing mbuf */
2963                 if (fcw->rm_e < ACC100_MAX_E_MBUF)
2964                         seg_total_left = rte_pktmbuf_data_len(input)
2965                                         - in_offset;
2966                 else
2967                         seg_total_left = fcw->rm_e;
2968
2969                 ret = acc100_dma_desc_ld_fill(op, &desc->req, &input, h_output,
2970                                 &in_offset, &h_out_offset,
2971                                 &h_out_length, &mbuf_total_left,
2972                                 &seg_total_left, fcw);
2973                 if (unlikely(ret < 0))
2974                         return ret;
2975         }
2976
2977         /* Hard output */
2978         mbuf_append(h_output_head, h_output, h_out_length);
2979 #ifndef ACC100_EXT_MEM
2980         if (op->ldpc_dec.harq_combined_output.length > 0) {
2981                 /* Push the HARQ output into host memory */
2982                 struct rte_mbuf *hq_output_head, *hq_output;
2983                 hq_output_head = op->ldpc_dec.harq_combined_output.data;
2984                 hq_output = op->ldpc_dec.harq_combined_output.data;
2985                 mbuf_append(hq_output_head, hq_output,
2986                                 op->ldpc_dec.harq_combined_output.length);
2987         }
2988 #endif
2989
2990 #ifdef RTE_LIBRTE_BBDEV_DEBUG
2991         rte_memdump(stderr, "FCW", &desc->req.fcw_ld,
2992                         sizeof(desc->req.fcw_ld) - 8);
2993         rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
2994 #endif
2995
2996         /* One CB (one op) was successfully prepared to enqueue */
2997         return 1;
2998 }
2999
3000
3001 /* Enqueue one decode operations for ACC100 device in TB mode */
3002 static inline int
3003 enqueue_ldpc_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
3004                 uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
3005 {
3006         union acc100_dma_desc *desc = NULL;
3007         int ret;
3008         uint8_t r, c;
3009         uint32_t in_offset, h_out_offset,
3010                 h_out_length, mbuf_total_left, seg_total_left;
3011         struct rte_mbuf *input, *h_output_head, *h_output;
3012         uint16_t current_enqueued_cbs = 0;
3013
3014 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3015         /* Validate op structure */
3016         if (validate_ldpc_dec_op(op) == -1) {
3017                 rte_bbdev_log(ERR, "LDPC decoder validation failed");
3018                 return -EINVAL;
3019         }
3020 #endif
3021
3022         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
3023                         & q->sw_ring_wrap_mask);
3024         desc = q->ring_addr + desc_idx;
3025         uint64_t fcw_offset = (desc_idx << 8) + ACC100_DESC_FCW_OFFSET;
3026         union acc100_harq_layout_data *harq_layout = q->d->harq_layout;
3027         acc100_fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout);
3028
3029         input = op->ldpc_dec.input.data;
3030         h_output_head = h_output = op->ldpc_dec.hard_output.data;
3031         in_offset = op->ldpc_dec.input.offset;
3032         h_out_offset = op->ldpc_dec.hard_output.offset;
3033         h_out_length = 0;
3034         mbuf_total_left = op->ldpc_dec.input.length;
3035         c = op->ldpc_dec.tb_params.c;
3036         r = op->ldpc_dec.tb_params.r;
3037
3038         while (mbuf_total_left > 0 && r < c) {
3039
3040                 seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
3041
3042                 /* Set up DMA descriptor */
3043                 desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
3044                                 & q->sw_ring_wrap_mask);
3045                 desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
3046                 desc->req.data_ptrs[0].blen = ACC100_FCW_LD_BLEN;
3047                 ret = acc100_dma_desc_ld_fill(op, &desc->req, &input,
3048                                 h_output, &in_offset, &h_out_offset,
3049                                 &h_out_length,
3050                                 &mbuf_total_left, &seg_total_left,
3051                                 &desc->req.fcw_ld);
3052
3053                 if (unlikely(ret < 0))
3054                         return ret;
3055
3056                 /* Hard output */
3057                 mbuf_append(h_output_head, h_output, h_out_length);
3058
3059                 /* Set total number of CBs in TB */
3060                 desc->req.cbs_in_tb = cbs_in_tb;
3061 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3062                 rte_memdump(stderr, "FCW", &desc->req.fcw_td,
3063                                 sizeof(desc->req.fcw_td) - 8);
3064                 rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
3065 #endif
3066
3067                 if (seg_total_left == 0) {
3068                         /* Go to the next mbuf */
3069                         input = input->next;
3070                         in_offset = 0;
3071                         h_output = h_output->next;
3072                         h_out_offset = 0;
3073                 }
3074                 total_enqueued_cbs++;
3075                 current_enqueued_cbs++;
3076                 r++;
3077         }
3078
3079         if (unlikely(desc == NULL))
3080                 return current_enqueued_cbs;
3081
3082 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3083         if (check_mbuf_total_left(mbuf_total_left) != 0)
3084                 return -EINVAL;
3085 #endif
3086         /* Set SDone on last CB descriptor for TB mode */
3087         desc->req.sdone_enable = 1;
3088         desc->req.irq_enable = q->irq_enable;
3089
3090         return current_enqueued_cbs;
3091 }
3092
3093 /* Enqueue one decode operations for ACC100 device in TB mode */
3094 static inline int
3095 enqueue_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op *op,
3096                 uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
3097 {
3098         union acc100_dma_desc *desc = NULL;
3099         int ret;
3100         uint8_t r, c;
3101         uint32_t in_offset, h_out_offset, s_out_offset, s_out_length,
3102                 h_out_length, mbuf_total_left, seg_total_left;
3103         struct rte_mbuf *input, *h_output_head, *h_output,
3104                 *s_output_head, *s_output;
3105         uint16_t current_enqueued_cbs = 0;
3106
3107 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3108         /* Validate op structure */
3109         if (validate_dec_op(op) == -1) {
3110                 rte_bbdev_log(ERR, "Turbo decoder validation failed");
3111                 return -EINVAL;
3112         }
3113 #endif
3114
3115         uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
3116                         & q->sw_ring_wrap_mask);
3117         desc = q->ring_addr + desc_idx;
3118         uint64_t fcw_offset = (desc_idx << 8) + ACC100_DESC_FCW_OFFSET;
3119         acc100_fcw_td_fill(op, &desc->req.fcw_td);
3120
3121         input = op->turbo_dec.input.data;
3122         h_output_head = h_output = op->turbo_dec.hard_output.data;
3123         s_output_head = s_output = op->turbo_dec.soft_output.data;
3124         in_offset = op->turbo_dec.input.offset;
3125         h_out_offset = op->turbo_dec.hard_output.offset;
3126         s_out_offset = op->turbo_dec.soft_output.offset;
3127         h_out_length = s_out_length = 0;
3128         mbuf_total_left = op->turbo_dec.input.length;
3129         c = op->turbo_dec.tb_params.c;
3130         r = op->turbo_dec.tb_params.r;
3131
3132         while (mbuf_total_left > 0 && r < c) {
3133
3134                 seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
3135
3136                 /* Set up DMA descriptor */
3137                 desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
3138                                 & q->sw_ring_wrap_mask);
3139                 desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
3140                 desc->req.data_ptrs[0].blen = ACC100_FCW_TD_BLEN;
3141                 ret = acc100_dma_desc_td_fill(op, &desc->req, &input,
3142                                 h_output, s_output, &in_offset, &h_out_offset,
3143                                 &s_out_offset, &h_out_length, &s_out_length,
3144                                 &mbuf_total_left, &seg_total_left, r);
3145
3146                 if (unlikely(ret < 0))
3147                         return ret;
3148
3149                 /* Hard output */
3150                 mbuf_append(h_output_head, h_output, h_out_length);
3151
3152                 /* Soft output */
3153                 if (check_bit(op->turbo_dec.op_flags,
3154                                 RTE_BBDEV_TURBO_SOFT_OUTPUT))
3155                         mbuf_append(s_output_head, s_output, s_out_length);
3156
3157                 /* Set total number of CBs in TB */
3158                 desc->req.cbs_in_tb = cbs_in_tb;
3159 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3160                 rte_memdump(stderr, "FCW", &desc->req.fcw_td,
3161                                 sizeof(desc->req.fcw_td) - 8);
3162                 rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
3163 #endif
3164
3165                 if (seg_total_left == 0) {
3166                         /* Go to the next mbuf */
3167                         input = input->next;
3168                         in_offset = 0;
3169                         h_output = h_output->next;
3170                         h_out_offset = 0;
3171
3172                         if (check_bit(op->turbo_dec.op_flags,
3173                                         RTE_BBDEV_TURBO_SOFT_OUTPUT)) {
3174                                 s_output = s_output->next;
3175                                 s_out_offset = 0;
3176                         }
3177                 }
3178
3179                 total_enqueued_cbs++;
3180                 current_enqueued_cbs++;
3181                 r++;
3182         }
3183
3184         if (unlikely(desc == NULL))
3185                 return current_enqueued_cbs;
3186
3187 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3188         if (check_mbuf_total_left(mbuf_total_left) != 0)
3189                 return -EINVAL;
3190 #endif
3191         /* Set SDone on last CB descriptor for TB mode */
3192         desc->req.sdone_enable = 1;
3193         desc->req.irq_enable = q->irq_enable;
3194
3195         return current_enqueued_cbs;
3196 }
3197
3198 /* Calculates number of CBs in processed encoder TB based on 'r' and input
3199  * length.
3200  */
3201 static inline uint8_t
3202 get_num_cbs_in_tb_enc(struct rte_bbdev_op_turbo_enc *turbo_enc)
3203 {
3204         uint8_t c, c_neg, r, crc24_bits = 0;
3205         uint16_t k, k_neg, k_pos;
3206         uint8_t cbs_in_tb = 0;
3207         int32_t length;
3208
3209         length = turbo_enc->input.length;
3210         r = turbo_enc->tb_params.r;
3211         c = turbo_enc->tb_params.c;
3212         c_neg = turbo_enc->tb_params.c_neg;
3213         k_neg = turbo_enc->tb_params.k_neg;
3214         k_pos = turbo_enc->tb_params.k_pos;
3215         crc24_bits = 0;
3216         if (check_bit(turbo_enc->op_flags, RTE_BBDEV_TURBO_CRC_24B_ATTACH))
3217                 crc24_bits = 24;
3218         while (length > 0 && r < c) {
3219                 k = (r < c_neg) ? k_neg : k_pos;
3220                 length -= (k - crc24_bits) >> 3;
3221                 r++;
3222                 cbs_in_tb++;
3223         }
3224
3225         return cbs_in_tb;
3226 }
3227
3228 /* Calculates number of CBs in processed decoder TB based on 'r' and input
3229  * length.
3230  */
3231 static inline uint16_t
3232 get_num_cbs_in_tb_dec(struct rte_bbdev_op_turbo_dec *turbo_dec)
3233 {
3234         uint8_t c, c_neg, r = 0;
3235         uint16_t kw, k, k_neg, k_pos, cbs_in_tb = 0;
3236         int32_t length;
3237
3238         length = turbo_dec->input.length;
3239         r = turbo_dec->tb_params.r;
3240         c = turbo_dec->tb_params.c;
3241         c_neg = turbo_dec->tb_params.c_neg;
3242         k_neg = turbo_dec->tb_params.k_neg;
3243         k_pos = turbo_dec->tb_params.k_pos;
3244         while (length > 0 && r < c) {
3245                 k = (r < c_neg) ? k_neg : k_pos;
3246                 kw = RTE_ALIGN_CEIL(k + 4, 32) * 3;
3247                 length -= kw;
3248                 r++;
3249                 cbs_in_tb++;
3250         }
3251
3252         return cbs_in_tb;
3253 }
3254
3255 /* Calculates number of CBs in processed decoder TB based on 'r' and input
3256  * length.
3257  */
3258 static inline uint16_t
3259 get_num_cbs_in_tb_ldpc_dec(struct rte_bbdev_op_ldpc_dec *ldpc_dec)
3260 {
3261         uint16_t r, cbs_in_tb = 0;
3262         int32_t length = ldpc_dec->input.length;
3263         r = ldpc_dec->tb_params.r;
3264         while (length > 0 && r < ldpc_dec->tb_params.c) {
3265                 length -=  (r < ldpc_dec->tb_params.cab) ?
3266                                 ldpc_dec->tb_params.ea :
3267                                 ldpc_dec->tb_params.eb;
3268                 r++;
3269                 cbs_in_tb++;
3270         }
3271         return cbs_in_tb;
3272 }
3273
3274 /* Enqueue encode operations for ACC100 device in CB mode. */
3275 static uint16_t
3276 acc100_enqueue_enc_cb(struct rte_bbdev_queue_data *q_data,
3277                 struct rte_bbdev_enc_op **ops, uint16_t num)
3278 {
3279         struct acc100_queue *q = q_data->queue_private;
3280         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3281         uint16_t i;
3282         union acc100_dma_desc *desc;
3283         int ret;
3284
3285         for (i = 0; i < num; ++i) {
3286                 /* Check if there are available space for further processing */
3287                 if (unlikely(avail - 1 < 0))
3288                         break;
3289                 avail -= 1;
3290
3291                 ret = enqueue_enc_one_op_cb(q, ops[i], i);
3292                 if (ret < 0)
3293                         break;
3294         }
3295
3296         if (unlikely(i == 0))
3297                 return 0; /* Nothing to enqueue */
3298
3299         /* Set SDone in last CB in enqueued ops for CB mode*/
3300         desc = q->ring_addr + ((q->sw_ring_head + i - 1)
3301                         & q->sw_ring_wrap_mask);
3302         desc->req.sdone_enable = 1;
3303         desc->req.irq_enable = q->irq_enable;
3304
3305         acc100_dma_enqueue(q, i, &q_data->queue_stats);
3306
3307         /* Update stats */
3308         q_data->queue_stats.enqueued_count += i;
3309         q_data->queue_stats.enqueue_err_count += num - i;
3310         return i;
3311 }
3312
3313 /* Check we can mux encode operations with common FCW */
3314 static inline bool
3315 check_mux(struct rte_bbdev_enc_op **ops, uint16_t num) {
3316         uint16_t i;
3317         if (num <= 1)
3318                 return false;
3319         for (i = 1; i < num; ++i) {
3320                 /* Only mux compatible code blocks */
3321                 if (memcmp((uint8_t *)(&ops[i]->ldpc_enc) + ACC100_ENC_OFFSET,
3322                                 (uint8_t *)(&ops[0]->ldpc_enc) +
3323                                 ACC100_ENC_OFFSET,
3324                                 ACC100_CMP_ENC_SIZE) != 0)
3325                         return false;
3326         }
3327         return true;
3328 }
3329
3330 /** Enqueue encode operations for ACC100 device in CB mode. */
3331 static inline uint16_t
3332 acc100_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data *q_data,
3333                 struct rte_bbdev_enc_op **ops, uint16_t num)
3334 {
3335         struct acc100_queue *q = q_data->queue_private;
3336         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3337         uint16_t i = 0;
3338         union acc100_dma_desc *desc;
3339         int ret, desc_idx = 0;
3340         int16_t enq, left = num;
3341
3342         while (left > 0) {
3343                 if (unlikely(avail < 1))
3344                         break;
3345                 avail--;
3346                 enq = RTE_MIN(left, ACC100_MUX_5GDL_DESC);
3347                 if (check_mux(&ops[i], enq)) {
3348                         ret = enqueue_ldpc_enc_n_op_cb(q, &ops[i],
3349                                         desc_idx, enq);
3350                         if (ret < 0)
3351                                 break;
3352                         i += enq;
3353                 } else {
3354                         ret = enqueue_ldpc_enc_one_op_cb(q, ops[i], desc_idx);
3355                         if (ret < 0)
3356                                 break;
3357                         i++;
3358                 }
3359                 desc_idx++;
3360                 left = num - i;
3361         }
3362
3363         if (unlikely(i == 0))
3364                 return 0; /* Nothing to enqueue */
3365
3366         /* Set SDone in last CB in enqueued ops for CB mode*/
3367         desc = q->ring_addr + ((q->sw_ring_head + desc_idx - 1)
3368                         & q->sw_ring_wrap_mask);
3369         desc->req.sdone_enable = 1;
3370         desc->req.irq_enable = q->irq_enable;
3371
3372         acc100_dma_enqueue(q, desc_idx, &q_data->queue_stats);
3373
3374         /* Update stats */
3375         q_data->queue_stats.enqueued_count += i;
3376         q_data->queue_stats.enqueue_err_count += num - i;
3377
3378         return i;
3379 }
3380
3381 /* Enqueue encode operations for ACC100 device in TB mode. */
3382 static uint16_t
3383 acc100_enqueue_enc_tb(struct rte_bbdev_queue_data *q_data,
3384                 struct rte_bbdev_enc_op **ops, uint16_t num)
3385 {
3386         struct acc100_queue *q = q_data->queue_private;
3387         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3388         uint16_t i, enqueued_cbs = 0;
3389         uint8_t cbs_in_tb;
3390         int ret;
3391
3392         for (i = 0; i < num; ++i) {
3393                 cbs_in_tb = get_num_cbs_in_tb_enc(&ops[i]->turbo_enc);
3394                 /* Check if there are available space for further processing */
3395                 if (unlikely(avail - cbs_in_tb < 0))
3396                         break;
3397                 avail -= cbs_in_tb;
3398
3399                 ret = enqueue_enc_one_op_tb(q, ops[i], enqueued_cbs, cbs_in_tb);
3400                 if (ret < 0)
3401                         break;
3402                 enqueued_cbs += ret;
3403         }
3404         if (unlikely(enqueued_cbs == 0))
3405                 return 0; /* Nothing to enqueue */
3406
3407         acc100_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats);
3408
3409         /* Update stats */
3410         q_data->queue_stats.enqueued_count += i;
3411         q_data->queue_stats.enqueue_err_count += num - i;
3412
3413         return i;
3414 }
3415
3416 /* Enqueue encode operations for ACC100 device. */
3417 static uint16_t
3418 acc100_enqueue_enc(struct rte_bbdev_queue_data *q_data,
3419                 struct rte_bbdev_enc_op **ops, uint16_t num)
3420 {
3421         if (unlikely(num == 0))
3422                 return 0;
3423         if (ops[0]->turbo_enc.code_block_mode == 0)
3424                 return acc100_enqueue_enc_tb(q_data, ops, num);
3425         else
3426                 return acc100_enqueue_enc_cb(q_data, ops, num);
3427 }
3428
3429 /* Enqueue encode operations for ACC100 device. */
3430 static uint16_t
3431 acc100_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
3432                 struct rte_bbdev_enc_op **ops, uint16_t num)
3433 {
3434         if (unlikely(num == 0))
3435                 return 0;
3436         if (ops[0]->ldpc_enc.code_block_mode == 0)
3437                 return acc100_enqueue_enc_tb(q_data, ops, num);
3438         else
3439                 return acc100_enqueue_ldpc_enc_cb(q_data, ops, num);
3440 }
3441
3442
3443 /* Enqueue decode operations for ACC100 device in CB mode */
3444 static uint16_t
3445 acc100_enqueue_dec_cb(struct rte_bbdev_queue_data *q_data,
3446                 struct rte_bbdev_dec_op **ops, uint16_t num)
3447 {
3448         struct acc100_queue *q = q_data->queue_private;
3449         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3450         uint16_t i;
3451         union acc100_dma_desc *desc;
3452         int ret;
3453
3454         for (i = 0; i < num; ++i) {
3455                 /* Check if there are available space for further processing */
3456                 if (unlikely(avail - 1 < 0))
3457                         break;
3458                 avail -= 1;
3459
3460                 ret = enqueue_dec_one_op_cb(q, ops[i], i);
3461                 if (ret < 0)
3462                         break;
3463         }
3464
3465         if (unlikely(i == 0))
3466                 return 0; /* Nothing to enqueue */
3467
3468         /* Set SDone in last CB in enqueued ops for CB mode*/
3469         desc = q->ring_addr + ((q->sw_ring_head + i - 1)
3470                         & q->sw_ring_wrap_mask);
3471         desc->req.sdone_enable = 1;
3472         desc->req.irq_enable = q->irq_enable;
3473
3474         acc100_dma_enqueue(q, i, &q_data->queue_stats);
3475
3476         /* Update stats */
3477         q_data->queue_stats.enqueued_count += i;
3478         q_data->queue_stats.enqueue_err_count += num - i;
3479
3480         return i;
3481 }
3482
3483 /* Check we can mux encode operations with common FCW */
3484 static inline bool
3485 cmp_ldpc_dec_op(struct rte_bbdev_dec_op **ops) {
3486         /* Only mux compatible code blocks */
3487         if (memcmp((uint8_t *)(&ops[0]->ldpc_dec) + ACC100_DEC_OFFSET,
3488                         (uint8_t *)(&ops[1]->ldpc_dec) +
3489                         ACC100_DEC_OFFSET, ACC100_CMP_DEC_SIZE) != 0) {
3490                 return false;
3491         } else
3492                 return true;
3493 }
3494
3495
3496 /* Enqueue decode operations for ACC100 device in TB mode */
3497 static uint16_t
3498 acc100_enqueue_ldpc_dec_tb(struct rte_bbdev_queue_data *q_data,
3499                 struct rte_bbdev_dec_op **ops, uint16_t num)
3500 {
3501         struct acc100_queue *q = q_data->queue_private;
3502         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3503         uint16_t i, enqueued_cbs = 0;
3504         uint8_t cbs_in_tb;
3505         int ret;
3506
3507         for (i = 0; i < num; ++i) {
3508                 cbs_in_tb = get_num_cbs_in_tb_ldpc_dec(&ops[i]->ldpc_dec);
3509                 /* Check if there are available space for further processing */
3510                 if (unlikely(avail - cbs_in_tb < 0))
3511                         break;
3512                 avail -= cbs_in_tb;
3513
3514                 ret = enqueue_ldpc_dec_one_op_tb(q, ops[i],
3515                                 enqueued_cbs, cbs_in_tb);
3516                 if (ret < 0)
3517                         break;
3518                 enqueued_cbs += ret;
3519         }
3520
3521         acc100_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats);
3522
3523         /* Update stats */
3524         q_data->queue_stats.enqueued_count += i;
3525         q_data->queue_stats.enqueue_err_count += num - i;
3526         return i;
3527 }
3528
3529 /* Enqueue decode operations for ACC100 device in CB mode */
3530 static uint16_t
3531 acc100_enqueue_ldpc_dec_cb(struct rte_bbdev_queue_data *q_data,
3532                 struct rte_bbdev_dec_op **ops, uint16_t num)
3533 {
3534         struct acc100_queue *q = q_data->queue_private;
3535         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3536         uint16_t i;
3537         union acc100_dma_desc *desc;
3538         int ret;
3539         bool same_op = false;
3540         for (i = 0; i < num; ++i) {
3541                 /* Check if there are available space for further processing */
3542                 if (unlikely(avail < 1))
3543                         break;
3544                 avail -= 1;
3545
3546                 if (i > 0)
3547                         same_op = cmp_ldpc_dec_op(&ops[i-1]);
3548                 rte_bbdev_log(INFO, "Op %d %d %d %d %d %d %d %d %d %d %d %d\n",
3549                         i, ops[i]->ldpc_dec.op_flags, ops[i]->ldpc_dec.rv_index,
3550                         ops[i]->ldpc_dec.iter_max, ops[i]->ldpc_dec.iter_count,
3551                         ops[i]->ldpc_dec.basegraph, ops[i]->ldpc_dec.z_c,
3552                         ops[i]->ldpc_dec.n_cb, ops[i]->ldpc_dec.q_m,
3553                         ops[i]->ldpc_dec.n_filler, ops[i]->ldpc_dec.cb_params.e,
3554                         same_op);
3555                 ret = enqueue_ldpc_dec_one_op_cb(q, ops[i], i, same_op);
3556                 if (ret < 0)
3557                         break;
3558         }
3559
3560         if (unlikely(i == 0))
3561                 return 0; /* Nothing to enqueue */
3562
3563         /* Set SDone in last CB in enqueued ops for CB mode*/
3564         desc = q->ring_addr + ((q->sw_ring_head + i - 1)
3565                         & q->sw_ring_wrap_mask);
3566
3567         desc->req.sdone_enable = 1;
3568         desc->req.irq_enable = q->irq_enable;
3569
3570         acc100_dma_enqueue(q, i, &q_data->queue_stats);
3571
3572         /* Update stats */
3573         q_data->queue_stats.enqueued_count += i;
3574         q_data->queue_stats.enqueue_err_count += num - i;
3575         return i;
3576 }
3577
3578
3579 /* Enqueue decode operations for ACC100 device in TB mode */
3580 static uint16_t
3581 acc100_enqueue_dec_tb(struct rte_bbdev_queue_data *q_data,
3582                 struct rte_bbdev_dec_op **ops, uint16_t num)
3583 {
3584         struct acc100_queue *q = q_data->queue_private;
3585         int32_t avail = q->sw_ring_depth + q->sw_ring_tail - q->sw_ring_head;
3586         uint16_t i, enqueued_cbs = 0;
3587         uint8_t cbs_in_tb;
3588         int ret;
3589
3590         for (i = 0; i < num; ++i) {
3591                 cbs_in_tb = get_num_cbs_in_tb_dec(&ops[i]->turbo_dec);
3592                 /* Check if there are available space for further processing */
3593                 if (unlikely(avail - cbs_in_tb < 0))
3594                         break;
3595                 avail -= cbs_in_tb;
3596
3597                 ret = enqueue_dec_one_op_tb(q, ops[i], enqueued_cbs, cbs_in_tb);
3598                 if (ret < 0)
3599                         break;
3600                 enqueued_cbs += ret;
3601         }
3602
3603         acc100_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats);
3604
3605         /* Update stats */
3606         q_data->queue_stats.enqueued_count += i;
3607         q_data->queue_stats.enqueue_err_count += num - i;
3608
3609         return i;
3610 }
3611
3612 /* Enqueue decode operations for ACC100 device. */
3613 static uint16_t
3614 acc100_enqueue_dec(struct rte_bbdev_queue_data *q_data,
3615                 struct rte_bbdev_dec_op **ops, uint16_t num)
3616 {
3617         if (unlikely(num == 0))
3618                 return 0;
3619         if (ops[0]->turbo_dec.code_block_mode == 0)
3620                 return acc100_enqueue_dec_tb(q_data, ops, num);
3621         else
3622                 return acc100_enqueue_dec_cb(q_data, ops, num);
3623 }
3624
3625 /* Enqueue decode operations for ACC100 device. */
3626 static uint16_t
3627 acc100_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
3628                 struct rte_bbdev_dec_op **ops, uint16_t num)
3629 {
3630         struct acc100_queue *q = q_data->queue_private;
3631         int32_t aq_avail = q->aq_depth +
3632                         (q->aq_dequeued - q->aq_enqueued) / 128;
3633
3634         if (unlikely((aq_avail == 0) || (num == 0)))
3635                 return 0;
3636
3637         if (ops[0]->ldpc_dec.code_block_mode == 0)
3638                 return acc100_enqueue_ldpc_dec_tb(q_data, ops, num);
3639         else
3640                 return acc100_enqueue_ldpc_dec_cb(q_data, ops, num);
3641 }
3642
3643
3644 /* Dequeue one encode operations from ACC100 device in CB mode */
3645 static inline int
3646 dequeue_enc_one_op_cb(struct acc100_queue *q, struct rte_bbdev_enc_op **ref_op,
3647                 uint16_t total_dequeued_cbs, uint32_t *aq_dequeued)
3648 {
3649         union acc100_dma_desc *desc, atom_desc;
3650         union acc100_dma_rsp_desc rsp;
3651         struct rte_bbdev_enc_op *op;
3652         int i;
3653
3654         desc = q->ring_addr + ((q->sw_ring_tail + total_dequeued_cbs)
3655                         & q->sw_ring_wrap_mask);
3656         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3657                         __ATOMIC_RELAXED);
3658
3659         /* Check fdone bit */
3660         if (!(atom_desc.rsp.val & ACC100_FDONE))
3661                 return -1;
3662
3663         rsp.val = atom_desc.rsp.val;
3664         rte_bbdev_log_debug("Resp. desc %p: %x", desc, rsp.val);
3665
3666         /* Dequeue */
3667         op = desc->req.op_addr;
3668
3669         /* Clearing status, it will be set based on response */
3670         op->status = 0;
3671
3672         op->status |= ((rsp.input_err)
3673                         ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
3674         op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3675         op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3676
3677         if (desc->req.last_desc_in_batch) {
3678                 (*aq_dequeued)++;
3679                 desc->req.last_desc_in_batch = 0;
3680         }
3681         desc->rsp.val = ACC100_DMA_DESC_TYPE;
3682         desc->rsp.add_info_0 = 0; /*Reserved bits */
3683         desc->rsp.add_info_1 = 0; /*Reserved bits */
3684
3685         /* Flag that the muxing cause loss of opaque data */
3686         op->opaque_data = (void *)-1;
3687         for (i = 0 ; i < desc->req.numCBs; i++)
3688                 ref_op[i] = op;
3689
3690         /* One CB (op) was successfully dequeued */
3691         return desc->req.numCBs;
3692 }
3693
3694 /* Dequeue one encode operations from ACC100 device in TB mode */
3695 static inline int
3696 dequeue_enc_one_op_tb(struct acc100_queue *q, struct rte_bbdev_enc_op **ref_op,
3697                 uint16_t total_dequeued_cbs, uint32_t *aq_dequeued)
3698 {
3699         union acc100_dma_desc *desc, *last_desc, atom_desc;
3700         union acc100_dma_rsp_desc rsp;
3701         struct rte_bbdev_enc_op *op;
3702         uint8_t i = 0;
3703         uint16_t current_dequeued_cbs = 0, cbs_in_tb;
3704
3705         desc = q->ring_addr + ((q->sw_ring_tail + total_dequeued_cbs)
3706                         & q->sw_ring_wrap_mask);
3707         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3708                         __ATOMIC_RELAXED);
3709
3710         /* Check fdone bit */
3711         if (!(atom_desc.rsp.val & ACC100_FDONE))
3712                 return -1;
3713
3714         /* Get number of CBs in dequeued TB */
3715         cbs_in_tb = desc->req.cbs_in_tb;
3716         /* Get last CB */
3717         last_desc = q->ring_addr + ((q->sw_ring_tail
3718                         + total_dequeued_cbs + cbs_in_tb - 1)
3719                         & q->sw_ring_wrap_mask);
3720         /* Check if last CB in TB is ready to dequeue (and thus
3721          * the whole TB) - checking sdone bit. If not return.
3722          */
3723         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)last_desc,
3724                         __ATOMIC_RELAXED);
3725         if (!(atom_desc.rsp.val & ACC100_SDONE))
3726                 return -1;
3727
3728         /* Dequeue */
3729         op = desc->req.op_addr;
3730
3731         /* Clearing status, it will be set based on response */
3732         op->status = 0;
3733
3734         while (i < cbs_in_tb) {
3735                 desc = q->ring_addr + ((q->sw_ring_tail
3736                                 + total_dequeued_cbs)
3737                                 & q->sw_ring_wrap_mask);
3738                 atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3739                                 __ATOMIC_RELAXED);
3740                 rsp.val = atom_desc.rsp.val;
3741                 rte_bbdev_log_debug("Resp. desc %p: %x", desc,
3742                                 rsp.val);
3743
3744                 op->status |= ((rsp.input_err)
3745                                 ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
3746                 op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3747                 op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3748
3749                 if (desc->req.last_desc_in_batch) {
3750                         (*aq_dequeued)++;
3751                         desc->req.last_desc_in_batch = 0;
3752                 }
3753                 desc->rsp.val = ACC100_DMA_DESC_TYPE;
3754                 desc->rsp.add_info_0 = 0;
3755                 desc->rsp.add_info_1 = 0;
3756                 total_dequeued_cbs++;
3757                 current_dequeued_cbs++;
3758                 i++;
3759         }
3760
3761         *ref_op = op;
3762
3763         return current_dequeued_cbs;
3764 }
3765
3766 /* Dequeue one decode operation from ACC100 device in CB mode */
3767 static inline int
3768 dequeue_dec_one_op_cb(struct rte_bbdev_queue_data *q_data,
3769                 struct acc100_queue *q, struct rte_bbdev_dec_op **ref_op,
3770                 uint16_t dequeued_cbs, uint32_t *aq_dequeued)
3771 {
3772         union acc100_dma_desc *desc, atom_desc;
3773         union acc100_dma_rsp_desc rsp;
3774         struct rte_bbdev_dec_op *op;
3775
3776         desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
3777                         & q->sw_ring_wrap_mask);
3778         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3779                         __ATOMIC_RELAXED);
3780
3781         /* Check fdone bit */
3782         if (!(atom_desc.rsp.val & ACC100_FDONE))
3783                 return -1;
3784
3785         rsp.val = atom_desc.rsp.val;
3786         rte_bbdev_log_debug("Resp. desc %p: %x", desc, rsp.val);
3787
3788         /* Dequeue */
3789         op = desc->req.op_addr;
3790
3791         /* Clearing status, it will be set based on response */
3792         op->status = 0;
3793         op->status |= ((rsp.input_err)
3794                         ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
3795         op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3796         op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3797         if (op->status != 0) {
3798                 q_data->queue_stats.dequeue_err_count++;
3799                 acc100_check_ir(q->d);
3800         }
3801
3802         /* CRC invalid if error exists */
3803         if (!op->status)
3804                 op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR;
3805         op->turbo_dec.iter_count = (uint8_t) rsp.iter_cnt / 2;
3806         /* Check if this is the last desc in batch (Atomic Queue) */
3807         if (desc->req.last_desc_in_batch) {
3808                 (*aq_dequeued)++;
3809                 desc->req.last_desc_in_batch = 0;
3810         }
3811         desc->rsp.val = ACC100_DMA_DESC_TYPE;
3812         desc->rsp.add_info_0 = 0;
3813         desc->rsp.add_info_1 = 0;
3814         *ref_op = op;
3815
3816         /* One CB (op) was successfully dequeued */
3817         return 1;
3818 }
3819
3820 /* Dequeue one decode operations from ACC100 device in CB mode */
3821 static inline int
3822 dequeue_ldpc_dec_one_op_cb(struct rte_bbdev_queue_data *q_data,
3823                 struct acc100_queue *q, struct rte_bbdev_dec_op **ref_op,
3824                 uint16_t dequeued_cbs, uint32_t *aq_dequeued)
3825 {
3826         union acc100_dma_desc *desc, atom_desc;
3827         union acc100_dma_rsp_desc rsp;
3828         struct rte_bbdev_dec_op *op;
3829
3830         desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
3831                         & q->sw_ring_wrap_mask);
3832         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3833                         __ATOMIC_RELAXED);
3834
3835         /* Check fdone bit */
3836         if (!(atom_desc.rsp.val & ACC100_FDONE))
3837                 return -1;
3838
3839         rsp.val = atom_desc.rsp.val;
3840
3841         /* Dequeue */
3842         op = desc->req.op_addr;
3843
3844         /* Clearing status, it will be set based on response */
3845         op->status = 0;
3846         op->status |= rsp.input_err << RTE_BBDEV_DATA_ERROR;
3847         op->status |= rsp.dma_err << RTE_BBDEV_DRV_ERROR;
3848         op->status |= rsp.fcw_err << RTE_BBDEV_DRV_ERROR;
3849         if (op->status != 0)
3850                 q_data->queue_stats.dequeue_err_count++;
3851
3852         op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR;
3853         if (op->ldpc_dec.hard_output.length > 0 && !rsp.synd_ok)
3854                 op->status |= 1 << RTE_BBDEV_SYNDROME_ERROR;
3855         op->ldpc_dec.iter_count = (uint8_t) rsp.iter_cnt;
3856
3857         if (op->status & (1 << RTE_BBDEV_DRV_ERROR))
3858                 acc100_check_ir(q->d);
3859
3860         /* Check if this is the last desc in batch (Atomic Queue) */
3861         if (desc->req.last_desc_in_batch) {
3862                 (*aq_dequeued)++;
3863                 desc->req.last_desc_in_batch = 0;
3864         }
3865
3866         desc->rsp.val = ACC100_DMA_DESC_TYPE;
3867         desc->rsp.add_info_0 = 0;
3868         desc->rsp.add_info_1 = 0;
3869
3870         *ref_op = op;
3871
3872         /* One CB (op) was successfully dequeued */
3873         return 1;
3874 }
3875
3876 /* Dequeue one decode operations from ACC100 device in TB mode. */
3877 static inline int
3878 dequeue_dec_one_op_tb(struct acc100_queue *q, struct rte_bbdev_dec_op **ref_op,
3879                 uint16_t dequeued_cbs, uint32_t *aq_dequeued)
3880 {
3881         union acc100_dma_desc *desc, *last_desc, atom_desc;
3882         union acc100_dma_rsp_desc rsp;
3883         struct rte_bbdev_dec_op *op;
3884         uint8_t cbs_in_tb = 1, cb_idx = 0;
3885
3886         desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
3887                         & q->sw_ring_wrap_mask);
3888         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3889                         __ATOMIC_RELAXED);
3890
3891         /* Check fdone bit */
3892         if (!(atom_desc.rsp.val & ACC100_FDONE))
3893                 return -1;
3894
3895         /* Dequeue */
3896         op = desc->req.op_addr;
3897
3898         /* Get number of CBs in dequeued TB */
3899         cbs_in_tb = desc->req.cbs_in_tb;
3900         /* Get last CB */
3901         last_desc = q->ring_addr + ((q->sw_ring_tail
3902                         + dequeued_cbs + cbs_in_tb - 1)
3903                         & q->sw_ring_wrap_mask);
3904         /* Check if last CB in TB is ready to dequeue (and thus
3905          * the whole TB) - checking sdone bit. If not return.
3906          */
3907         atom_desc.atom_hdr = __atomic_load_n((uint64_t *)last_desc,
3908                         __ATOMIC_RELAXED);
3909         if (!(atom_desc.rsp.val & ACC100_SDONE))
3910                 return -1;
3911
3912         /* Clearing status, it will be set based on response */
3913         op->status = 0;
3914
3915         /* Read remaining CBs if exists */
3916         while (cb_idx < cbs_in_tb) {
3917                 desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
3918                                 & q->sw_ring_wrap_mask);
3919                 atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc,
3920                                 __ATOMIC_RELAXED);
3921                 rsp.val = atom_desc.rsp.val;
3922                 rte_bbdev_log_debug("Resp. desc %p: %x", desc,
3923                                 rsp.val);
3924
3925                 op->status |= ((rsp.input_err)
3926                                 ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
3927                 op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3928                 op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
3929
3930                 /* CRC invalid if error exists */
3931                 if (!op->status)
3932                         op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR;
3933                 op->turbo_dec.iter_count = RTE_MAX((uint8_t) rsp.iter_cnt,
3934                                 op->turbo_dec.iter_count);
3935
3936                 /* Check if this is the last desc in batch (Atomic Queue) */
3937                 if (desc->req.last_desc_in_batch) {
3938                         (*aq_dequeued)++;
3939                         desc->req.last_desc_in_batch = 0;
3940                 }
3941                 desc->rsp.val = ACC100_DMA_DESC_TYPE;
3942                 desc->rsp.add_info_0 = 0;
3943                 desc->rsp.add_info_1 = 0;
3944                 dequeued_cbs++;
3945                 cb_idx++;
3946         }
3947
3948         *ref_op = op;
3949
3950         return cb_idx;
3951 }
3952
3953 /* Dequeue encode operations from ACC100 device. */
3954 static uint16_t
3955 acc100_dequeue_enc(struct rte_bbdev_queue_data *q_data,
3956                 struct rte_bbdev_enc_op **ops, uint16_t num)
3957 {
3958         struct acc100_queue *q = q_data->queue_private;
3959         uint16_t dequeue_num;
3960         uint32_t avail = q->sw_ring_head - q->sw_ring_tail;
3961         uint32_t aq_dequeued = 0;
3962         uint16_t i, dequeued_cbs = 0;
3963         struct rte_bbdev_enc_op *op;
3964         int ret;
3965
3966 #ifdef RTE_LIBRTE_BBDEV_DEBUG
3967         if (unlikely(ops == NULL || q == NULL)) {
3968                 rte_bbdev_log_debug("Unexpected undefined pointer");
3969                 return 0;
3970         }
3971 #endif
3972
3973         dequeue_num = (avail < num) ? avail : num;
3974
3975         for (i = 0; i < dequeue_num; ++i) {
3976                 op = (q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
3977                         & q->sw_ring_wrap_mask))->req.op_addr;
3978                 if (op->turbo_enc.code_block_mode == 0)
3979                         ret = dequeue_enc_one_op_tb(q, &ops[i], dequeued_cbs,
3980                                         &aq_dequeued);
3981                 else
3982                         ret = dequeue_enc_one_op_cb(q, &ops[i], dequeued_cbs,
3983                                         &aq_dequeued);
3984
3985                 if (ret < 0)
3986                         break;
3987                 dequeued_cbs += ret;
3988         }
3989
3990         q->aq_dequeued += aq_dequeued;
3991         q->sw_ring_tail += dequeued_cbs;
3992
3993         /* Update enqueue stats */
3994         q_data->queue_stats.dequeued_count += i;
3995
3996         return i;
3997 }
3998
3999 /* Dequeue LDPC encode operations from ACC100 device. */
4000 static uint16_t
4001 acc100_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
4002                 struct rte_bbdev_enc_op **ops, uint16_t num)
4003 {
4004         struct acc100_queue *q = q_data->queue_private;
4005         uint32_t avail = q->sw_ring_head - q->sw_ring_tail;
4006         uint32_t aq_dequeued = 0;
4007         uint16_t dequeue_num, i, dequeued_cbs = 0, dequeued_descs = 0;
4008         int ret;
4009
4010 #ifdef RTE_LIBRTE_BBDEV_DEBUG
4011         if (unlikely(ops == 0 && q == NULL))
4012                 return 0;
4013 #endif
4014
4015         dequeue_num = RTE_MIN(avail, num);
4016
4017         for (i = 0; i < dequeue_num; i++) {
4018                 ret = dequeue_enc_one_op_cb(q, &ops[dequeued_cbs],
4019                                 dequeued_descs, &aq_dequeued);
4020                 if (ret < 0)
4021                         break;
4022                 dequeued_cbs += ret;
4023                 dequeued_descs++;
4024                 if (dequeued_cbs >= num)
4025                         break;
4026         }
4027
4028         q->aq_dequeued += aq_dequeued;
4029         q->sw_ring_tail += dequeued_descs;
4030
4031         /* Update enqueue stats */
4032         q_data->queue_stats.dequeued_count += dequeued_cbs;
4033
4034         return dequeued_cbs;
4035 }
4036
4037
4038 /* Dequeue decode operations from ACC100 device. */
4039 static uint16_t
4040 acc100_dequeue_dec(struct rte_bbdev_queue_data *q_data,
4041                 struct rte_bbdev_dec_op **ops, uint16_t num)
4042 {
4043         struct acc100_queue *q = q_data->queue_private;
4044         uint16_t dequeue_num;
4045         uint32_t avail = q->sw_ring_head - q->sw_ring_tail;
4046         uint32_t aq_dequeued = 0;
4047         uint16_t i;
4048         uint16_t dequeued_cbs = 0;
4049         struct rte_bbdev_dec_op *op;
4050         int ret;
4051
4052 #ifdef RTE_LIBRTE_BBDEV_DEBUG
4053         if (unlikely(ops == 0 && q == NULL))
4054                 return 0;
4055 #endif
4056
4057         dequeue_num = (avail < num) ? avail : num;
4058
4059         for (i = 0; i < dequeue_num; ++i) {
4060                 op = (q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
4061                         & q->sw_ring_wrap_mask))->req.op_addr;
4062                 if (op->turbo_dec.code_block_mode == 0)
4063                         ret = dequeue_dec_one_op_tb(q, &ops[i], dequeued_cbs,
4064                                         &aq_dequeued);
4065                 else
4066                         ret = dequeue_dec_one_op_cb(q_data, q, &ops[i],
4067                                         dequeued_cbs, &aq_dequeued);
4068
4069                 if (ret < 0)
4070                         break;
4071                 dequeued_cbs += ret;
4072         }
4073
4074         q->aq_dequeued += aq_dequeued;
4075         q->sw_ring_tail += dequeued_cbs;
4076
4077         /* Update enqueue stats */
4078         q_data->queue_stats.dequeued_count += i;
4079
4080         return i;
4081 }
4082
4083 /* Dequeue decode operations from ACC100 device. */
4084 static uint16_t
4085 acc100_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
4086                 struct rte_bbdev_dec_op **ops, uint16_t num)
4087 {
4088         struct acc100_queue *q = q_data->queue_private;
4089         uint16_t dequeue_num;
4090         uint32_t avail = q->sw_ring_head - q->sw_ring_tail;
4091         uint32_t aq_dequeued = 0;
4092         uint16_t i;
4093         uint16_t dequeued_cbs = 0;
4094         struct rte_bbdev_dec_op *op;
4095         int ret;
4096
4097 #ifdef RTE_LIBRTE_BBDEV_DEBUG
4098         if (unlikely(ops == 0 && q == NULL))
4099                 return 0;
4100 #endif
4101
4102         dequeue_num = RTE_MIN(avail, num);
4103
4104         for (i = 0; i < dequeue_num; ++i) {
4105                 op = (q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
4106                         & q->sw_ring_wrap_mask))->req.op_addr;
4107                 if (op->ldpc_dec.code_block_mode == 0)
4108                         ret = dequeue_dec_one_op_tb(q, &ops[i], dequeued_cbs,
4109                                         &aq_dequeued);
4110                 else
4111                         ret = dequeue_ldpc_dec_one_op_cb(
4112                                         q_data, q, &ops[i], dequeued_cbs,
4113                                         &aq_dequeued);
4114
4115                 if (ret < 0)
4116                         break;
4117                 dequeued_cbs += ret;
4118         }
4119
4120         q->aq_dequeued += aq_dequeued;
4121         q->sw_ring_tail += dequeued_cbs;
4122
4123         /* Update enqueue stats */
4124         q_data->queue_stats.dequeued_count += i;
4125
4126         return i;
4127 }
4128
4129 /* Initialization Function */
4130 static void
4131 acc100_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
4132 {
4133         struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
4134
4135         dev->dev_ops = &acc100_bbdev_ops;
4136         dev->enqueue_enc_ops = acc100_enqueue_enc;
4137         dev->enqueue_dec_ops = acc100_enqueue_dec;
4138         dev->dequeue_enc_ops = acc100_dequeue_enc;
4139         dev->dequeue_dec_ops = acc100_dequeue_dec;
4140         dev->enqueue_ldpc_enc_ops = acc100_enqueue_ldpc_enc;
4141         dev->enqueue_ldpc_dec_ops = acc100_enqueue_ldpc_dec;
4142         dev->dequeue_ldpc_enc_ops = acc100_dequeue_ldpc_enc;
4143         dev->dequeue_ldpc_dec_ops = acc100_dequeue_ldpc_dec;
4144
4145         ((struct acc100_device *) dev->data->dev_private)->pf_device =
4146                         !strcmp(drv->driver.name,
4147                                         RTE_STR(ACC100PF_DRIVER_NAME));
4148         ((struct acc100_device *) dev->data->dev_private)->mmio_base =
4149                         pci_dev->mem_resource[0].addr;
4150
4151         rte_bbdev_log_debug("Init device %s [%s] @ vaddr %p paddr %#"PRIx64"",
4152                         drv->driver.name, dev->data->name,
4153                         (void *)pci_dev->mem_resource[0].addr,
4154                         pci_dev->mem_resource[0].phys_addr);
4155 }
4156
4157 static int acc100_pci_probe(struct rte_pci_driver *pci_drv,
4158         struct rte_pci_device *pci_dev)
4159 {
4160         struct rte_bbdev *bbdev = NULL;
4161         char dev_name[RTE_BBDEV_NAME_MAX_LEN];
4162
4163         if (pci_dev == NULL) {
4164                 rte_bbdev_log(ERR, "NULL PCI device");
4165                 return -EINVAL;
4166         }
4167
4168         rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name));
4169
4170         /* Allocate memory to be used privately by drivers */
4171         bbdev = rte_bbdev_allocate(pci_dev->device.name);
4172         if (bbdev == NULL)
4173                 return -ENODEV;
4174
4175         /* allocate device private memory */
4176         bbdev->data->dev_private = rte_zmalloc_socket(dev_name,
4177                         sizeof(struct acc100_device), RTE_CACHE_LINE_SIZE,
4178                         pci_dev->device.numa_node);
4179
4180         if (bbdev->data->dev_private == NULL) {
4181                 rte_bbdev_log(CRIT,
4182                                 "Allocate of %zu bytes for device \"%s\" failed",
4183                                 sizeof(struct acc100_device), dev_name);
4184                                 rte_bbdev_release(bbdev);
4185                         return -ENOMEM;
4186         }
4187
4188         /* Fill HW specific part of device structure */
4189         bbdev->device = &pci_dev->device;
4190         bbdev->intr_handle = &pci_dev->intr_handle;
4191         bbdev->data->socket_id = pci_dev->device.numa_node;
4192
4193         /* Invoke ACC100 device initialization function */
4194         acc100_bbdev_init(bbdev, pci_drv);
4195
4196         rte_bbdev_log_debug("Initialised bbdev %s (id = %u)",
4197                         dev_name, bbdev->data->dev_id);
4198         return 0;
4199 }
4200
4201 static int acc100_pci_remove(struct rte_pci_device *pci_dev)
4202 {
4203         struct rte_bbdev *bbdev;
4204         int ret;
4205         uint8_t dev_id;
4206
4207         if (pci_dev == NULL)
4208                 return -EINVAL;
4209
4210         /* Find device */
4211         bbdev = rte_bbdev_get_named_dev(pci_dev->device.name);
4212         if (bbdev == NULL) {
4213                 rte_bbdev_log(CRIT,
4214                                 "Couldn't find HW dev \"%s\" to uninitialise it",
4215                                 pci_dev->device.name);
4216                 return -ENODEV;
4217         }
4218         dev_id = bbdev->data->dev_id;
4219
4220         /* free device private memory before close */
4221         rte_free(bbdev->data->dev_private);
4222
4223         /* Close device */
4224         ret = rte_bbdev_close(dev_id);
4225         if (ret < 0)
4226                 rte_bbdev_log(ERR,
4227                                 "Device %i failed to close during uninit: %i",
4228                                 dev_id, ret);
4229
4230         /* release bbdev from library */
4231         rte_bbdev_release(bbdev);
4232
4233         rte_bbdev_log_debug("Destroyed bbdev = %u", dev_id);
4234
4235         return 0;
4236 }
4237
4238 static struct rte_pci_driver acc100_pci_pf_driver = {
4239                 .probe = acc100_pci_probe,
4240                 .remove = acc100_pci_remove,
4241                 .id_table = pci_id_acc100_pf_map,
4242                 .drv_flags = RTE_PCI_DRV_NEED_MAPPING
4243 };
4244
4245 static struct rte_pci_driver acc100_pci_vf_driver = {
4246                 .probe = acc100_pci_probe,
4247                 .remove = acc100_pci_remove,
4248                 .id_table = pci_id_acc100_vf_map,
4249                 .drv_flags = RTE_PCI_DRV_NEED_MAPPING
4250 };
4251
4252 RTE_PMD_REGISTER_PCI(ACC100PF_DRIVER_NAME, acc100_pci_pf_driver);
4253 RTE_PMD_REGISTER_PCI_TABLE(ACC100PF_DRIVER_NAME, pci_id_acc100_pf_map);
4254 RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME, acc100_pci_vf_driver);
4255 RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME, pci_id_acc100_vf_map);
4256
4257 /*
4258  * Workaround implementation to fix the power on status of some 5GUL engines
4259  * This requires DMA permission if ported outside DPDK
4260  * It consists in resolving the state of these engines by running a
4261  * dummy operation and resetting the engines to ensure state are reliably
4262  * defined.
4263  */
4264 static void
4265 poweron_cleanup(struct rte_bbdev *bbdev, struct acc100_device *d,
4266                 struct rte_acc100_conf *conf)
4267 {
4268         int i, template_idx, qg_idx;
4269         uint32_t address, status, value;
4270         printf("Need to clear power-on 5GUL status in internal memory\n");
4271         /* Reset LDPC Cores */
4272         for (i = 0; i < ACC100_ENGINES_MAX; i++)
4273                 acc100_reg_write(d, HWPfFecUl5gCntrlReg +
4274                                 ACC100_ENGINE_OFFSET * i, ACC100_RESET_HI);
4275         usleep(ACC100_LONG_WAIT);
4276         for (i = 0; i < ACC100_ENGINES_MAX; i++)
4277                 acc100_reg_write(d, HWPfFecUl5gCntrlReg +
4278                                 ACC100_ENGINE_OFFSET * i, ACC100_RESET_LO);
4279         usleep(ACC100_LONG_WAIT);
4280         /* Prepare dummy workload */
4281         alloc_2x64mb_sw_rings_mem(bbdev, d, 0);
4282         /* Set base addresses */
4283         uint32_t phys_high = (uint32_t)(d->sw_rings_iova >> 32);
4284         uint32_t phys_low  = (uint32_t)(d->sw_rings_iova &
4285                         ~(ACC100_SIZE_64MBYTE-1));
4286         acc100_reg_write(d, HWPfDmaFec5GulDescBaseHiRegVf, phys_high);
4287         acc100_reg_write(d, HWPfDmaFec5GulDescBaseLoRegVf, phys_low);
4288
4289         /* Descriptor for a dummy 5GUL code block processing*/
4290         union acc100_dma_desc *desc = NULL;
4291         desc = d->sw_rings;
4292         desc->req.data_ptrs[0].address = d->sw_rings_iova +
4293                         ACC100_DESC_FCW_OFFSET;
4294         desc->req.data_ptrs[0].blen = ACC100_FCW_LD_BLEN;
4295         desc->req.data_ptrs[0].blkid = ACC100_DMA_BLKID_FCW;
4296         desc->req.data_ptrs[0].last = 0;
4297         desc->req.data_ptrs[0].dma_ext = 0;
4298         desc->req.data_ptrs[1].address = d->sw_rings_iova + 512;
4299         desc->req.data_ptrs[1].blkid = ACC100_DMA_BLKID_IN;
4300         desc->req.data_ptrs[1].last = 1;
4301         desc->req.data_ptrs[1].dma_ext = 0;
4302         desc->req.data_ptrs[1].blen = 44;
4303         desc->req.data_ptrs[2].address = d->sw_rings_iova + 1024;
4304         desc->req.data_ptrs[2].blkid = ACC100_DMA_BLKID_OUT_ENC;
4305         desc->req.data_ptrs[2].last = 1;
4306         desc->req.data_ptrs[2].dma_ext = 0;
4307         desc->req.data_ptrs[2].blen = 5;
4308         /* Dummy FCW */
4309         desc->req.fcw_ld.FCWversion = ACC100_FCW_VER;
4310         desc->req.fcw_ld.qm = 1;
4311         desc->req.fcw_ld.nfiller = 30;
4312         desc->req.fcw_ld.BG = 2 - 1;
4313         desc->req.fcw_ld.Zc = 7;
4314         desc->req.fcw_ld.ncb = 350;
4315         desc->req.fcw_ld.rm_e = 4;
4316         desc->req.fcw_ld.itmax = 10;
4317         desc->req.fcw_ld.gain_i = 1;
4318         desc->req.fcw_ld.gain_h = 1;
4319
4320         int engines_to_restart[ACC100_SIG_UL_5G_LAST + 1] = {0};
4321         int num_failed_engine = 0;
4322         /* Detect engines in undefined state */
4323         for (template_idx = ACC100_SIG_UL_5G;
4324                         template_idx <= ACC100_SIG_UL_5G_LAST;
4325                         template_idx++) {
4326                 /* Check engine power-on status */
4327                 address = HwPfFecUl5gIbDebugReg +
4328                                 ACC100_ENGINE_OFFSET * template_idx;
4329                 status = (acc100_reg_read(d, address) >> 4) & 0xF;
4330                 if (status == 0) {
4331                         engines_to_restart[num_failed_engine] = template_idx;
4332                         num_failed_engine++;
4333                 }
4334         }
4335
4336         int numQqsAcc = conf->q_ul_5g.num_qgroups;
4337         int numQgs = conf->q_ul_5g.num_qgroups;
4338         value = 0;
4339         for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
4340                 value |= (1 << qg_idx);
4341         /* Force each engine which is in unspecified state */
4342         for (i = 0; i < num_failed_engine; i++) {
4343                 int failed_engine = engines_to_restart[i];
4344                 printf("Force engine %d\n", failed_engine);
4345                 for (template_idx = ACC100_SIG_UL_5G;
4346                                 template_idx <= ACC100_SIG_UL_5G_LAST;
4347                                 template_idx++) {
4348                         address = HWPfQmgrGrpTmplateReg4Indx
4349                                         + ACC100_BYTES_IN_WORD * template_idx;
4350                         if (template_idx == failed_engine)
4351                                 acc100_reg_write(d, address, value);
4352                         else
4353                                 acc100_reg_write(d, address, 0);
4354                 }
4355                 /* Reset descriptor header */
4356                 desc->req.word0 = ACC100_DMA_DESC_TYPE;
4357                 desc->req.word1 = 0;
4358                 desc->req.word2 = 0;
4359                 desc->req.word3 = 0;
4360                 desc->req.numCBs = 1;
4361                 desc->req.m2dlen = 2;
4362                 desc->req.d2mlen = 1;
4363                 /* Enqueue the code block for processing */
4364                 union acc100_enqueue_reg_fmt enq_req;
4365                 enq_req.val = 0;
4366                 enq_req.addr_offset = ACC100_DESC_OFFSET;
4367                 enq_req.num_elem = 1;
4368                 enq_req.req_elem_addr = 0;
4369                 rte_wmb();
4370                 acc100_reg_write(d, HWPfQmgrIngressAq + 0x100, enq_req.val);
4371                 usleep(ACC100_LONG_WAIT * 100);
4372                 if (desc->req.word0 != 2)
4373                         printf("DMA Response %#"PRIx32"\n", desc->req.word0);
4374         }
4375
4376         /* Reset LDPC Cores */
4377         for (i = 0; i < ACC100_ENGINES_MAX; i++)
4378                 acc100_reg_write(d, HWPfFecUl5gCntrlReg +
4379                                 ACC100_ENGINE_OFFSET * i,
4380                                 ACC100_RESET_HI);
4381         usleep(ACC100_LONG_WAIT);
4382         for (i = 0; i < ACC100_ENGINES_MAX; i++)
4383                 acc100_reg_write(d, HWPfFecUl5gCntrlReg +
4384                                 ACC100_ENGINE_OFFSET * i,
4385                                 ACC100_RESET_LO);
4386         usleep(ACC100_LONG_WAIT);
4387         acc100_reg_write(d, HWPfHi5GHardResetReg, ACC100_RESET_HARD);
4388         usleep(ACC100_LONG_WAIT);
4389         int numEngines = 0;
4390         /* Check engine power-on status again */
4391         for (template_idx = ACC100_SIG_UL_5G;
4392                         template_idx <= ACC100_SIG_UL_5G_LAST;
4393                         template_idx++) {
4394                 address = HwPfFecUl5gIbDebugReg +
4395                                 ACC100_ENGINE_OFFSET * template_idx;
4396                 status = (acc100_reg_read(d, address) >> 4) & 0xF;
4397                 address = HWPfQmgrGrpTmplateReg4Indx
4398                                 + ACC100_BYTES_IN_WORD * template_idx;
4399                 if (status == 1) {
4400                         acc100_reg_write(d, address, value);
4401                         numEngines++;
4402                 } else
4403                         acc100_reg_write(d, address, 0);
4404         }
4405         printf("Number of 5GUL engines %d\n", numEngines);
4406
4407         if (d->sw_rings_base != NULL)
4408                 rte_free(d->sw_rings_base);
4409         usleep(ACC100_LONG_WAIT);
4410 }
4411
4412 /* Initial configuration of a ACC100 device prior to running configure() */
4413 int
4414 rte_acc100_configure(const char *dev_name, struct rte_acc100_conf *conf)
4415 {
4416         rte_bbdev_log(INFO, "rte_acc100_configure");
4417         uint32_t value, address, status;
4418         int qg_idx, template_idx, vf_idx, acc, i;
4419         struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
4420
4421         /* Compile time checks */
4422         RTE_BUILD_BUG_ON(sizeof(struct acc100_dma_req_desc) != 256);
4423         RTE_BUILD_BUG_ON(sizeof(union acc100_dma_desc) != 256);
4424         RTE_BUILD_BUG_ON(sizeof(struct acc100_fcw_td) != 24);
4425         RTE_BUILD_BUG_ON(sizeof(struct acc100_fcw_te) != 32);
4426
4427         if (bbdev == NULL) {
4428                 rte_bbdev_log(ERR,
4429                 "Invalid dev_name (%s), or device is not yet initialised",
4430                 dev_name);
4431                 return -ENODEV;
4432         }
4433         struct acc100_device *d = bbdev->data->dev_private;
4434
4435         /* Store configuration */
4436         rte_memcpy(&d->acc100_conf, conf, sizeof(d->acc100_conf));
4437
4438         /* PCIe Bridge configuration */
4439         acc100_reg_write(d, HwPfPcieGpexBridgeControl, ACC100_CFG_PCI_BRIDGE);
4440         for (i = 1; i < ACC100_GPEX_AXIMAP_NUM; i++)
4441                 acc100_reg_write(d,
4442                                 HwPfPcieGpexAxiAddrMappingWindowPexBaseHigh
4443                                 + i * 16, 0);
4444
4445         /* Prevent blocking AXI read on BRESP for AXI Write */
4446         address = HwPfPcieGpexAxiPioControl;
4447         value = ACC100_CFG_PCI_AXI;
4448         acc100_reg_write(d, address, value);
4449
4450         /* 5GDL PLL phase shift */
4451         acc100_reg_write(d, HWPfChaDl5gPllPhshft0, 0x1);
4452
4453         /* Explicitly releasing AXI as this may be stopped after PF FLR/BME */
4454         address = HWPfDmaAxiControl;
4455         value = 1;
4456         acc100_reg_write(d, address, value);
4457
4458         /* DDR Configuration */
4459         address = HWPfDdrBcTim6;
4460         value = acc100_reg_read(d, address);
4461         value &= 0xFFFFFFFB; /* Bit 2 */
4462 #ifdef ACC100_DDR_ECC_ENABLE
4463         value |= 0x4;
4464 #endif
4465         acc100_reg_write(d, address, value);
4466         address = HWPfDdrPhyDqsCountNum;
4467 #ifdef ACC100_DDR_ECC_ENABLE
4468         value = 9;
4469 #else
4470         value = 8;
4471 #endif
4472         acc100_reg_write(d, address, value);
4473
4474         /* Set default descriptor signature */
4475         address = HWPfDmaDescriptorSignatuture;
4476         value = 0;
4477         acc100_reg_write(d, address, value);
4478
4479         /* Enable the Error Detection in DMA */
4480         value = ACC100_CFG_DMA_ERROR;
4481         address = HWPfDmaErrorDetectionEn;
4482         acc100_reg_write(d, address, value);
4483
4484         /* AXI Cache configuration */
4485         value = ACC100_CFG_AXI_CACHE;
4486         address = HWPfDmaAxcacheReg;
4487         acc100_reg_write(d, address, value);
4488
4489         /* Default DMA Configuration (Qmgr Enabled) */
4490         address = HWPfDmaConfig0Reg;
4491         value = 0;
4492         acc100_reg_write(d, address, value);
4493         address = HWPfDmaQmanen;
4494         value = 0;
4495         acc100_reg_write(d, address, value);
4496
4497         /* Default RLIM/ALEN configuration */
4498         address = HWPfDmaConfig1Reg;
4499         value = (1 << 31) + (23 << 8) + (1 << 6) + 7;
4500         acc100_reg_write(d, address, value);
4501
4502         /* Configure DMA Qmanager addresses */
4503         address = HWPfDmaQmgrAddrReg;
4504         value = HWPfQmgrEgressQueuesTemplate;
4505         acc100_reg_write(d, address, value);
4506
4507         /* ===== Qmgr Configuration ===== */
4508         /* Configuration of the AQueue Depth QMGR_GRP_0_DEPTH_LOG2 for UL */
4509         int totalQgs = conf->q_ul_4g.num_qgroups +
4510                         conf->q_ul_5g.num_qgroups +
4511                         conf->q_dl_4g.num_qgroups +
4512                         conf->q_dl_5g.num_qgroups;
4513         for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
4514                 address = HWPfQmgrDepthLog2Grp +
4515                 ACC100_BYTES_IN_WORD * qg_idx;
4516                 value = aqDepth(qg_idx, conf);
4517                 acc100_reg_write(d, address, value);
4518                 address = HWPfQmgrTholdGrp +
4519                 ACC100_BYTES_IN_WORD * qg_idx;
4520                 value = (1 << 16) + (1 << (aqDepth(qg_idx, conf) - 1));
4521                 acc100_reg_write(d, address, value);
4522         }
4523
4524         /* Template Priority in incremental order */
4525         for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
4526                         template_idx++) {
4527                 address = HWPfQmgrGrpTmplateReg0Indx +
4528                 ACC100_BYTES_IN_WORD * (template_idx % 8);
4529                 value = ACC100_TMPL_PRI_0;
4530                 acc100_reg_write(d, address, value);
4531                 address = HWPfQmgrGrpTmplateReg1Indx +
4532                 ACC100_BYTES_IN_WORD * (template_idx % 8);
4533                 value = ACC100_TMPL_PRI_1;
4534                 acc100_reg_write(d, address, value);
4535                 address = HWPfQmgrGrpTmplateReg2indx +
4536                 ACC100_BYTES_IN_WORD * (template_idx % 8);
4537                 value = ACC100_TMPL_PRI_2;
4538                 acc100_reg_write(d, address, value);
4539                 address = HWPfQmgrGrpTmplateReg3Indx +
4540                 ACC100_BYTES_IN_WORD * (template_idx % 8);
4541                 value = ACC100_TMPL_PRI_3;
4542                 acc100_reg_write(d, address, value);
4543         }
4544
4545         address = HWPfQmgrGrpPriority;
4546         value = ACC100_CFG_QMGR_HI_P;
4547         acc100_reg_write(d, address, value);
4548
4549         /* Template Configuration */
4550         for (template_idx = 0; template_idx < ACC100_NUM_TMPL;
4551                         template_idx++) {
4552                 value = 0;
4553                 address = HWPfQmgrGrpTmplateReg4Indx
4554                                 + ACC100_BYTES_IN_WORD * template_idx;
4555                 acc100_reg_write(d, address, value);
4556         }
4557         /* 4GUL */
4558         int numQgs = conf->q_ul_4g.num_qgroups;
4559         int numQqsAcc = 0;
4560         value = 0;
4561         for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
4562                 value |= (1 << qg_idx);
4563         for (template_idx = ACC100_SIG_UL_4G;
4564                         template_idx <= ACC100_SIG_UL_4G_LAST;
4565                         template_idx++) {
4566                 address = HWPfQmgrGrpTmplateReg4Indx
4567                                 + ACC100_BYTES_IN_WORD * template_idx;
4568                 acc100_reg_write(d, address, value);
4569         }
4570         /* 5GUL */
4571         numQqsAcc += numQgs;
4572         numQgs  = conf->q_ul_5g.num_qgroups;
4573         value = 0;
4574         int numEngines = 0;
4575         for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
4576                 value |= (1 << qg_idx);
4577         for (template_idx = ACC100_SIG_UL_5G;
4578                         template_idx <= ACC100_SIG_UL_5G_LAST;
4579                         template_idx++) {
4580                 /* Check engine power-on status */
4581                 address = HwPfFecUl5gIbDebugReg +
4582                                 ACC100_ENGINE_OFFSET * template_idx;
4583                 status = (acc100_reg_read(d, address) >> 4) & 0xF;
4584                 address = HWPfQmgrGrpTmplateReg4Indx
4585                                 + ACC100_BYTES_IN_WORD * template_idx;
4586                 if (status == 1) {
4587                         acc100_reg_write(d, address, value);
4588                         numEngines++;
4589                 } else
4590                         acc100_reg_write(d, address, 0);
4591 #if RTE_ACC100_SINGLE_FEC == 1
4592                 value = 0;
4593 #endif
4594         }
4595         printf("Number of 5GUL engines %d\n", numEngines);
4596         /* 4GDL */
4597         numQqsAcc += numQgs;
4598         numQgs  = conf->q_dl_4g.num_qgroups;
4599         value = 0;
4600         for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
4601                 value |= (1 << qg_idx);
4602         for (template_idx = ACC100_SIG_DL_4G;
4603                         template_idx <= ACC100_SIG_DL_4G_LAST;
4604                         template_idx++) {
4605                 address = HWPfQmgrGrpTmplateReg4Indx
4606                                 + ACC100_BYTES_IN_WORD * template_idx;
4607                 acc100_reg_write(d, address, value);
4608 #if RTE_ACC100_SINGLE_FEC == 1
4609                         value = 0;
4610 #endif
4611         }
4612         /* 5GDL */
4613         numQqsAcc += numQgs;
4614         numQgs  = conf->q_dl_5g.num_qgroups;
4615         value = 0;
4616         for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
4617                 value |= (1 << qg_idx);
4618         for (template_idx = ACC100_SIG_DL_5G;
4619                         template_idx <= ACC100_SIG_DL_5G_LAST;
4620                         template_idx++) {
4621                 address = HWPfQmgrGrpTmplateReg4Indx
4622                                 + ACC100_BYTES_IN_WORD * template_idx;
4623                 acc100_reg_write(d, address, value);
4624 #if RTE_ACC100_SINGLE_FEC == 1
4625                 value = 0;
4626 #endif
4627         }
4628
4629         /* Queue Group Function mapping */
4630         int qman_func_id[5] = {0, 2, 1, 3, 4};
4631         address = HWPfQmgrGrpFunction0;
4632         value = 0;
4633         for (qg_idx = 0; qg_idx < 8; qg_idx++) {
4634                 acc = accFromQgid(qg_idx, conf);
4635                 value |= qman_func_id[acc]<<(qg_idx * 4);
4636         }
4637         acc100_reg_write(d, address, value);
4638
4639         /* Configuration of the Arbitration QGroup depth to 1 */
4640         for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
4641                 address = HWPfQmgrArbQDepthGrp +
4642                 ACC100_BYTES_IN_WORD * qg_idx;
4643                 value = 0;
4644                 acc100_reg_write(d, address, value);
4645         }
4646
4647         /* Enabling AQueues through the Queue hierarchy*/
4648         for (vf_idx = 0; vf_idx < ACC100_NUM_VFS; vf_idx++) {
4649                 for (qg_idx = 0; qg_idx < ACC100_NUM_QGRPS; qg_idx++) {
4650                         value = 0;
4651                         if (vf_idx < conf->num_vf_bundles &&
4652                                         qg_idx < totalQgs)
4653                                 value = (1 << aqNum(qg_idx, conf)) - 1;
4654                         address = HWPfQmgrAqEnableVf
4655                                         + vf_idx * ACC100_BYTES_IN_WORD;
4656                         value += (qg_idx << 16);
4657                         acc100_reg_write(d, address, value);
4658                 }
4659         }
4660
4661         /* This pointer to ARAM (256kB) is shifted by 2 (4B per register) */
4662         uint32_t aram_address = 0;
4663         for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
4664                 for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
4665                         address = HWPfQmgrVfBaseAddr + vf_idx
4666                                         * ACC100_BYTES_IN_WORD + qg_idx
4667                                         * ACC100_BYTES_IN_WORD * 64;
4668                         value = aram_address;
4669                         acc100_reg_write(d, address, value);
4670                         /* Offset ARAM Address for next memory bank
4671                          * - increment of 4B
4672                          */
4673                         aram_address += aqNum(qg_idx, conf) *
4674                                         (1 << aqDepth(qg_idx, conf));
4675                 }
4676         }
4677
4678         if (aram_address > ACC100_WORDS_IN_ARAM_SIZE) {
4679                 rte_bbdev_log(ERR, "ARAM Configuration not fitting %d %d\n",
4680                                 aram_address, ACC100_WORDS_IN_ARAM_SIZE);
4681                 return -EINVAL;
4682         }
4683
4684         /* ==== HI Configuration ==== */
4685
4686         /* Prevent Block on Transmit Error */
4687         address = HWPfHiBlockTransmitOnErrorEn;
4688         value = 0;
4689         acc100_reg_write(d, address, value);
4690         /* Prevents to drop MSI */
4691         address = HWPfHiMsiDropEnableReg;
4692         value = 0;
4693         acc100_reg_write(d, address, value);
4694         /* Set the PF Mode register */
4695         address = HWPfHiPfMode;
4696         value = (conf->pf_mode_en) ? ACC100_PF_VAL : 0;
4697         acc100_reg_write(d, address, value);
4698         /* Enable Error Detection in HW */
4699         address = HWPfDmaErrorDetectionEn;
4700         value = 0x3D7;
4701         acc100_reg_write(d, address, value);
4702
4703         /* QoS overflow init */
4704         value = 1;
4705         address = HWPfQosmonAEvalOverflow0;
4706         acc100_reg_write(d, address, value);
4707         address = HWPfQosmonBEvalOverflow0;
4708         acc100_reg_write(d, address, value);
4709
4710         /* HARQ DDR Configuration */
4711         unsigned int ddrSizeInMb = 512; /* Fixed to 512 MB per VF for now */
4712         for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
4713                 address = HWPfDmaVfDdrBaseRw + vf_idx
4714                                 * 0x10;
4715                 value = ((vf_idx * (ddrSizeInMb / 64)) << 16) +
4716                                 (ddrSizeInMb - 1);
4717                 acc100_reg_write(d, address, value);
4718         }
4719         usleep(ACC100_LONG_WAIT);
4720
4721         /* Workaround in case some 5GUL engines are in an unexpected state */
4722         if (numEngines < (ACC100_SIG_UL_5G_LAST + 1))
4723                 poweron_cleanup(bbdev, d, conf);
4724
4725         rte_bbdev_log_debug("PF Tip configuration complete for %s", dev_name);
4726         return 0;
4727 }