1 /* SPDX-License-Identifier: BSD-3-Clause
3 * Copyright 2016,2018-2019 NXP
13 #include <rte_malloc.h>
14 #include <rte_devargs.h>
15 #include <rte_memcpy.h>
16 #include <rte_ethdev_driver.h>
18 #include <rte_fslmc.h>
19 #include <fslmc_vfio.h>
20 #include "fslmc_logs.h"
22 #include <dpaax_iova_table.h>
24 int dpaa2_logtype_bus;
26 #define VFIO_IOMMU_GROUP_PATH "/sys/kernel/iommu_groups"
27 #define FSLMC_BUS_NAME fslmc
29 struct rte_fslmc_bus rte_fslmc_bus;
30 uint8_t dpaa2_virt_mode;
33 rte_fslmc_get_device_count(enum rte_dpaa2_dev_type device_type)
35 if (device_type >= DPAA2_DEVTYPE_MAX)
37 return rte_fslmc_bus.device_count[device_type];
40 RTE_DEFINE_PER_LCORE(struct dpaa2_portal_dqrr, dpaa2_held_bufs);
43 cleanup_fslmc_device_list(void)
45 struct rte_dpaa2_device *dev;
46 struct rte_dpaa2_device *t_dev;
48 TAILQ_FOREACH_SAFE(dev, &rte_fslmc_bus.device_list, next, t_dev) {
49 TAILQ_REMOVE(&rte_fslmc_bus.device_list, dev, next);
56 compare_dpaa2_devname(struct rte_dpaa2_device *dev1,
57 struct rte_dpaa2_device *dev2)
61 if (dev1->dev_type > dev2->dev_type) {
63 } else if (dev1->dev_type < dev2->dev_type) {
66 /* Check the ID as types match */
67 if (dev1->object_id > dev2->object_id)
69 else if (dev1->object_id < dev2->object_id)
72 comp = 0; /* Duplicate device name */
79 insert_in_device_list(struct rte_dpaa2_device *newdev)
81 int comp, inserted = 0;
82 struct rte_dpaa2_device *dev = NULL;
83 struct rte_dpaa2_device *tdev = NULL;
85 TAILQ_FOREACH_SAFE(dev, &rte_fslmc_bus.device_list, next, tdev) {
86 comp = compare_dpaa2_devname(newdev, dev);
88 TAILQ_INSERT_BEFORE(dev, newdev, next);
95 TAILQ_INSERT_TAIL(&rte_fslmc_bus.device_list, newdev, next);
98 static struct rte_devargs *
99 fslmc_devargs_lookup(struct rte_dpaa2_device *dev)
101 struct rte_devargs *devargs;
104 RTE_EAL_DEVARGS_FOREACH("fslmc", devargs) {
105 devargs->bus->parse(devargs->name, &dev_name);
106 if (strcmp(dev_name, dev->device.name) == 0) {
107 DPAA2_BUS_INFO("**Devargs matched %s", dev_name);
115 dump_device_list(void)
117 struct rte_dpaa2_device *dev;
118 uint32_t global_log_level;
121 /* Only if the log level has been set to Debugging, print list */
122 global_log_level = rte_log_get_global_level();
123 local_log_level = rte_log_get_level(dpaa2_logtype_bus);
124 if (global_log_level == RTE_LOG_DEBUG ||
125 local_log_level == RTE_LOG_DEBUG) {
126 DPAA2_BUS_LOG(DEBUG, "List of devices scanned on bus:");
127 TAILQ_FOREACH(dev, &rte_fslmc_bus.device_list, next) {
128 DPAA2_BUS_LOG(DEBUG, "\t\t%s", dev->device.name);
134 scan_one_fslmc_device(char *dev_name)
136 char *dup_dev_name, *t_ptr;
137 struct rte_dpaa2_device *dev = NULL;
143 /* Ignore the Container name itself */
144 if (!strncmp("dprc", dev_name, 4))
147 /* Creating a temporary copy to perform cut-parse over string */
148 dup_dev_name = strdup(dev_name);
150 DPAA2_BUS_ERR("Unable to allocate device name memory");
154 /* For all other devices, we allocate rte_dpaa2_device.
155 * For those devices where there is no driver, probe would release
156 * the memory associated with the rte_dpaa2_device after necessary
159 dev = calloc(1, sizeof(struct rte_dpaa2_device));
161 DPAA2_BUS_ERR("Unable to allocate device object");
166 dev->device.bus = &rte_fslmc_bus.bus;
168 /* Parse the device name and ID */
169 t_ptr = strtok(dup_dev_name, ".");
171 DPAA2_BUS_ERR("Invalid device found: (%s)", dup_dev_name);
175 if (!strncmp("dpni", t_ptr, 4))
176 dev->dev_type = DPAA2_ETH;
177 else if (!strncmp("dpseci", t_ptr, 6))
178 dev->dev_type = DPAA2_CRYPTO;
179 else if (!strncmp("dpcon", t_ptr, 5))
180 dev->dev_type = DPAA2_CON;
181 else if (!strncmp("dpbp", t_ptr, 4))
182 dev->dev_type = DPAA2_BPOOL;
183 else if (!strncmp("dpio", t_ptr, 4))
184 dev->dev_type = DPAA2_IO;
185 else if (!strncmp("dpci", t_ptr, 4))
186 dev->dev_type = DPAA2_CI;
187 else if (!strncmp("dpmcp", t_ptr, 5))
188 dev->dev_type = DPAA2_MPORTAL;
189 else if (!strncmp("dpdmai", t_ptr, 6))
190 dev->dev_type = DPAA2_QDMA;
191 else if (!strncmp("dpdmux", t_ptr, 6))
192 dev->dev_type = DPAA2_MUX;
193 else if (!strncmp("dprtc", t_ptr, 5))
194 dev->dev_type = DPAA2_DPRTC;
196 dev->dev_type = DPAA2_UNKNOWN;
198 t_ptr = strtok(NULL, ".");
200 DPAA2_BUS_ERR("Skipping invalid device (%s)", dup_dev_name);
205 sscanf(t_ptr, "%hu", &dev->object_id);
206 dev->device.name = strdup(dev_name);
207 if (!dev->device.name) {
208 DPAA2_BUS_ERR("Unable to clone device name. Out of memory");
212 dev->device.devargs = fslmc_devargs_lookup(dev);
214 /* Update the device found into the device_count table */
215 rte_fslmc_bus.device_count[dev->dev_type]++;
217 /* Add device in the fslmc device list */
218 insert_in_device_list(dev);
220 /* Don't need the duplicated device filesystem entry anymore */
234 rte_fslmc_parse(const char *name, void *addr)
239 uint8_t sep_exists = 0;
242 DPAA2_BUS_DEBUG("Parsing dev=(%s)", name);
244 /* There are multiple ways this can be called, with bus:dev, name=dev
245 * or just dev. In all cases, the 'addr' is actually a string.
247 sep = strchr(name, ':');
250 sep = strchr(name, '=');
258 /* Check if starting part if either of 'fslmc:' or 'name=', separator
262 /* If either of "fslmc" or "name" are starting part */
263 if (!strncmp(name, RTE_STR(FSLMC_BUS_NAME),
264 strlen(RTE_STR(FSLMC_BUS_NAME))) ||
265 (!strncmp(name, "name", strlen("name")))) {
268 DPAA2_BUS_DEBUG("Invalid device for matching (%s).",
277 /* Validate device name */
278 if (strncmp("dpni", sep, 4) &&
279 strncmp("dpseci", sep, 6) &&
280 strncmp("dpcon", sep, 5) &&
281 strncmp("dpbp", sep, 4) &&
282 strncmp("dpio", sep, 4) &&
283 strncmp("dpci", sep, 4) &&
284 strncmp("dpmcp", sep, 5) &&
285 strncmp("dpdmai", sep, 6) &&
286 strncmp("dpdmux", sep, 6)) {
287 DPAA2_BUS_DEBUG("Unknown or unsupported device (%s)", sep);
292 t_ptr = strchr(sep, '.');
293 if (!t_ptr || sscanf(t_ptr + 1, "%hu", &dev_id) != 1) {
294 DPAA2_BUS_ERR("Missing device id in device name (%s)", sep);
311 int device_count = 0;
312 char fslmc_dirpath[PATH_MAX];
314 struct dirent *entry;
315 static int process_once;
319 DPAA2_BUS_DEBUG("Fslmc bus already scanned. Not rescanning");
324 ret = fslmc_get_container_group(&groupid);
328 /* Scan devices on the group */
329 sprintf(fslmc_dirpath, "%s/%s", SYSFS_FSL_MC_DEVICES, fslmc_container);
330 dir = opendir(fslmc_dirpath);
332 DPAA2_BUS_ERR("Unable to open VFIO group directory");
336 while ((entry = readdir(dir)) != NULL) {
337 if (entry->d_name[0] == '.' || entry->d_type != DT_DIR)
340 ret = scan_one_fslmc_device(entry->d_name);
342 /* Error in parsing directory - exit gracefully */
343 goto scan_fail_cleanup;
350 DPAA2_BUS_INFO("FSLMC Bus scan completed");
351 /* If debugging is enabled, device list is dumped to log output */
359 /* Remove all devices in the list */
360 cleanup_fslmc_device_list();
362 DPAA2_BUS_DEBUG("FSLMC Bus Not Available. Skipping (%d)", ret);
363 /* Irrespective of failure, scan only return success */
368 rte_fslmc_match(struct rte_dpaa2_driver *dpaa2_drv,
369 struct rte_dpaa2_device *dpaa2_dev)
371 if (dpaa2_drv->drv_type == dpaa2_dev->dev_type)
378 rte_fslmc_probe(void)
383 struct rte_dpaa2_device *dev;
384 struct rte_dpaa2_driver *drv;
386 if (TAILQ_EMPTY(&rte_fslmc_bus.device_list))
389 ret = fslmc_vfio_setup_group();
391 DPAA2_BUS_ERR("Unable to setup VFIO %d", ret);
395 /* Map existing segments as well as, in case of hotpluggable memory,
396 * install callback handler.
398 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
399 ret = rte_fslmc_vfio_dmamap();
401 DPAA2_BUS_ERR("Unable to DMA map existing VAs: (%d)",
403 /* Not continuing ahead */
404 DPAA2_BUS_ERR("FSLMC VFIO Mapping failed");
409 ret = fslmc_vfio_process_group();
411 DPAA2_BUS_ERR("Unable to setup devices %d", ret);
415 probe_all = rte_fslmc_bus.bus.conf.scan_mode != RTE_BUS_SCAN_WHITELIST;
417 /* In case of PA, the FD addresses returned by qbman APIs are physical
418 * addresses, which need conversion into equivalent VA address for
419 * rte_mbuf. For that, a table (a serial array, in memory) is used to
420 * increase translation efficiency.
421 * This has to be done before probe as some device initialization
422 * (during) probe allocate memory (dpaa2_sec) which needs to be pinned
425 * Error is ignored as relevant logs are handled within dpaax and
426 * handling for unavailable dpaax table too is transparent to caller.
428 * And, the IOVA table is only applicable in case of PA mode.
430 if (rte_eal_iova_mode() == RTE_IOVA_PA)
431 dpaax_iova_table_populate();
433 TAILQ_FOREACH(dev, &rte_fslmc_bus.device_list, next) {
434 TAILQ_FOREACH(drv, &rte_fslmc_bus.driver_list, next) {
435 ret = rte_fslmc_match(drv, dev);
442 if (rte_dev_is_probed(&dev->device))
445 if (dev->device.devargs &&
446 dev->device.devargs->policy == RTE_DEV_BLACKLISTED) {
447 DPAA2_BUS_LOG(DEBUG, "%s Blacklisted, skipping",
453 (dev->device.devargs &&
454 dev->device.devargs->policy ==
455 RTE_DEV_WHITELISTED)) {
456 ret = drv->probe(drv, dev);
458 DPAA2_BUS_ERR("Unable to probe");
461 dev->device.driver = &drv->driver;
468 if (rte_eal_iova_mode() == RTE_IOVA_VA)
474 static struct rte_device *
475 rte_fslmc_find_device(const struct rte_device *start, rte_dev_cmp_t cmp,
478 const struct rte_dpaa2_device *dstart;
479 struct rte_dpaa2_device *dev;
481 DPAA2_BUS_DEBUG("Finding a device named %s\n", (const char *)data);
483 /* find_device is always called with an opaque object which should be
484 * passed along to the 'cmp' function iterating over all device obj
489 dstart = RTE_DEV_TO_FSLMC_CONST(start);
490 dev = TAILQ_NEXT(dstart, next);
492 dev = TAILQ_FIRST(&rte_fslmc_bus.device_list);
494 while (dev != NULL) {
495 if (cmp(&dev->device, data) == 0) {
496 DPAA2_BUS_DEBUG("Found device (%s)\n",
500 dev = TAILQ_NEXT(dev, next);
506 /*register a fslmc bus based dpaa2 driver */
508 rte_fslmc_driver_register(struct rte_dpaa2_driver *driver)
512 TAILQ_INSERT_TAIL(&rte_fslmc_bus.driver_list, driver, next);
513 /* Update Bus references */
514 driver->fslmc_bus = &rte_fslmc_bus;
517 /*un-register a fslmc bus based dpaa2 driver */
519 rte_fslmc_driver_unregister(struct rte_dpaa2_driver *driver)
521 struct rte_fslmc_bus *fslmc_bus;
523 fslmc_bus = driver->fslmc_bus;
525 /* Cleanup the PA->VA Translation table; From whereever this function
528 if (rte_eal_iova_mode() == RTE_IOVA_PA)
529 dpaax_iova_table_depopulate();
531 TAILQ_REMOVE(&fslmc_bus->driver_list, driver, next);
532 /* Update Bus references */
533 driver->fslmc_bus = NULL;
537 * All device has iova as va
540 fslmc_all_device_support_iova(void)
543 struct rte_dpaa2_device *dev;
544 struct rte_dpaa2_driver *drv;
546 TAILQ_FOREACH(dev, &rte_fslmc_bus.device_list, next) {
547 TAILQ_FOREACH(drv, &rte_fslmc_bus.driver_list, next) {
548 ret = rte_fslmc_match(drv, dev);
551 /* if the driver is not supporting IOVA */
552 if (!(drv->drv_flags & RTE_DPAA2_DRV_IOVA_AS_VA))
560 * Get iommu class of DPAA2 devices on the bus.
562 static enum rte_iova_mode
563 rte_dpaa2_get_iommu_class(void)
565 bool is_vfio_noiommu_enabled = 1;
568 if (TAILQ_EMPTY(&rte_fslmc_bus.device_list))
571 #ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
575 /* check if all devices on the bus support Virtual addressing or not */
576 has_iova_va = fslmc_all_device_support_iova();
579 is_vfio_noiommu_enabled = rte_vfio_noiommu_is_enabled() == true ?
583 if (has_iova_va && !is_vfio_noiommu_enabled)
590 fslmc_bus_plug(struct rte_device *dev __rte_unused)
592 /* No operation is performed while plugging the device */
597 fslmc_bus_unplug(struct rte_device *dev __rte_unused)
599 /* No operation is performed while unplugging the device */
604 fslmc_bus_dev_iterate(const void *start, const char *str,
605 const struct rte_dev_iterator *it __rte_unused)
607 const struct rte_dpaa2_device *dstart;
608 struct rte_dpaa2_device *dev;
609 char *dup, *dev_name = NULL;
611 /* Expectation is that device would be name=device_name */
612 if (strncmp(str, "name=", 5) != 0) {
613 DPAA2_BUS_DEBUG("Invalid device string (%s)\n", str);
617 /* Now that name=device_name format is available, split */
619 dev_name = dup + strlen("name=");
622 dstart = RTE_DEV_TO_FSLMC_CONST(start);
623 dev = TAILQ_NEXT(dstart, next);
625 dev = TAILQ_FIRST(&rte_fslmc_bus.device_list);
628 while (dev != NULL) {
629 if (strcmp(dev->device.name, dev_name) == 0) {
633 dev = TAILQ_NEXT(dev, next);
640 struct rte_fslmc_bus rte_fslmc_bus = {
642 .scan = rte_fslmc_scan,
643 .probe = rte_fslmc_probe,
644 .parse = rte_fslmc_parse,
645 .find_device = rte_fslmc_find_device,
646 .get_iommu_class = rte_dpaa2_get_iommu_class,
647 .plug = fslmc_bus_plug,
648 .unplug = fslmc_bus_unplug,
649 .dev_iterate = fslmc_bus_dev_iterate,
651 .device_list = TAILQ_HEAD_INITIALIZER(rte_fslmc_bus.device_list),
652 .driver_list = TAILQ_HEAD_INITIALIZER(rte_fslmc_bus.driver_list),
656 RTE_REGISTER_BUS(FSLMC_BUS_NAME, rte_fslmc_bus.bus);
658 RTE_INIT(fslmc_init_log)
661 dpaa2_logtype_bus = rte_log_register("bus.fslmc");
662 if (dpaa2_logtype_bus >= 0)
663 rte_log_set_level(dpaa2_logtype_bus, RTE_LOG_NOTICE);