doc: remove references to the old build system
[dpdk.git] / drivers / common / iavf / virtchnl.h
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2001-2021 Intel Corporation
3  */
4
5 #ifndef _VIRTCHNL_H_
6 #define _VIRTCHNL_H_
7
8 /* Description:
9  * This header file describes the Virtual Function (VF) - Physical Function
10  * (PF) communication protocol used by the drivers for all devices starting
11  * from our 40G product line
12  *
13  * Admin queue buffer usage:
14  * desc->opcode is always aqc_opc_send_msg_to_pf
15  * flags, retval, datalen, and data addr are all used normally.
16  * The Firmware copies the cookie fields when sending messages between the
17  * PF and VF, but uses all other fields internally. Due to this limitation,
18  * we must send all messages as "indirect", i.e. using an external buffer.
19  *
20  * All the VSI indexes are relative to the VF. Each VF can have maximum of
21  * three VSIs. All the queue indexes are relative to the VSI.  Each VF can
22  * have a maximum of sixteen queues for all of its VSIs.
23  *
24  * The PF is required to return a status code in v_retval for all messages
25  * except RESET_VF, which does not require any response. The returned value
26  * is of virtchnl_status_code type, defined in the shared type.h.
27  *
28  * In general, VF driver initialization should roughly follow the order of
29  * these opcodes. The VF driver must first validate the API version of the
30  * PF driver, then request a reset, then get resources, then configure
31  * queues and interrupts. After these operations are complete, the VF
32  * driver may start its queues, optionally add MAC and VLAN filters, and
33  * process traffic.
34  */
35
36 /* START GENERIC DEFINES
37  * Need to ensure the following enums and defines hold the same meaning and
38  * value in current and future projects
39  */
40
41 /* Error Codes */
42 enum virtchnl_status_code {
43         VIRTCHNL_STATUS_SUCCESS                         = 0,
44         VIRTCHNL_STATUS_ERR_PARAM                       = -5,
45         VIRTCHNL_STATUS_ERR_NO_MEMORY                   = -18,
46         VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH             = -38,
47         VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR             = -39,
48         VIRTCHNL_STATUS_ERR_INVALID_VF_ID               = -40,
49         VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR           = -53,
50         VIRTCHNL_STATUS_ERR_NOT_SUPPORTED               = -64,
51 };
52
53 /* Backward compatibility */
54 #define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM
55 #define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED
56
57 #define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT         0x0
58 #define VIRTCHNL_LINK_SPEED_100MB_SHIFT         0x1
59 #define VIRTCHNL_LINK_SPEED_1000MB_SHIFT        0x2
60 #define VIRTCHNL_LINK_SPEED_10GB_SHIFT          0x3
61 #define VIRTCHNL_LINK_SPEED_40GB_SHIFT          0x4
62 #define VIRTCHNL_LINK_SPEED_20GB_SHIFT          0x5
63 #define VIRTCHNL_LINK_SPEED_25GB_SHIFT          0x6
64 #define VIRTCHNL_LINK_SPEED_5GB_SHIFT           0x7
65
66 enum virtchnl_link_speed {
67         VIRTCHNL_LINK_SPEED_UNKNOWN     = 0,
68         VIRTCHNL_LINK_SPEED_100MB       = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT),
69         VIRTCHNL_LINK_SPEED_1GB         = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT),
70         VIRTCHNL_LINK_SPEED_10GB        = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT),
71         VIRTCHNL_LINK_SPEED_40GB        = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
72         VIRTCHNL_LINK_SPEED_20GB        = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
73         VIRTCHNL_LINK_SPEED_25GB        = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
74         VIRTCHNL_LINK_SPEED_2_5GB       = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT),
75         VIRTCHNL_LINK_SPEED_5GB         = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT),
76 };
77
78 /* for hsplit_0 field of Rx HMC context */
79 /* deprecated with IAVF 1.0 */
80 enum virtchnl_rx_hsplit {
81         VIRTCHNL_RX_HSPLIT_NO_SPLIT      = 0,
82         VIRTCHNL_RX_HSPLIT_SPLIT_L2      = 1,
83         VIRTCHNL_RX_HSPLIT_SPLIT_IP      = 2,
84         VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4,
85         VIRTCHNL_RX_HSPLIT_SPLIT_SCTP    = 8,
86 };
87
88 enum virtchnl_bw_limit_type {
89         VIRTCHNL_BW_SHAPER = 0,
90 };
91
92 #define VIRTCHNL_ETH_LENGTH_OF_ADDRESS  6
93 /* END GENERIC DEFINES */
94
95 /* Opcodes for VF-PF communication. These are placed in the v_opcode field
96  * of the virtchnl_msg structure.
97  */
98 enum virtchnl_ops {
99 /* The PF sends status change events to VFs using
100  * the VIRTCHNL_OP_EVENT opcode.
101  * VFs send requests to the PF using the other ops.
102  * Use of "advanced opcode" features must be negotiated as part of capabilities
103  * exchange and are not considered part of base mode feature set.
104  */
105         VIRTCHNL_OP_UNKNOWN = 0,
106         VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
107         VIRTCHNL_OP_RESET_VF = 2,
108         VIRTCHNL_OP_GET_VF_RESOURCES = 3,
109         VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
110         VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
111         VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
112         VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
113         VIRTCHNL_OP_ENABLE_QUEUES = 8,
114         VIRTCHNL_OP_DISABLE_QUEUES = 9,
115         VIRTCHNL_OP_ADD_ETH_ADDR = 10,
116         VIRTCHNL_OP_DEL_ETH_ADDR = 11,
117         VIRTCHNL_OP_ADD_VLAN = 12,
118         VIRTCHNL_OP_DEL_VLAN = 13,
119         VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
120         VIRTCHNL_OP_GET_STATS = 15,
121         VIRTCHNL_OP_RSVD = 16,
122         VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
123         /* opcode 19 is reserved */
124         /* opcodes 20, 21, and 22 are reserved */
125         VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
126         VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
127         VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
128         VIRTCHNL_OP_SET_RSS_HENA = 26,
129         VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27,
130         VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28,
131         VIRTCHNL_OP_REQUEST_QUEUES = 29,
132         VIRTCHNL_OP_ENABLE_CHANNELS = 30,
133         VIRTCHNL_OP_DISABLE_CHANNELS = 31,
134         VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
135         VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
136         /* opcodes 34, 35, 36, and 37 are reserved */
137         VIRTCHNL_OP_DCF_CONFIG_BW = 37,
138         VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
139         VIRTCHNL_OP_DCF_CMD_DESC = 39,
140         VIRTCHNL_OP_DCF_CMD_BUFF = 40,
141         VIRTCHNL_OP_DCF_DISABLE = 41,
142         VIRTCHNL_OP_DCF_GET_VSI_MAP = 42,
143         VIRTCHNL_OP_DCF_GET_PKG_INFO = 43,
144         VIRTCHNL_OP_GET_SUPPORTED_RXDIDS = 44,
145         VIRTCHNL_OP_ADD_RSS_CFG = 45,
146         VIRTCHNL_OP_DEL_RSS_CFG = 46,
147         VIRTCHNL_OP_ADD_FDIR_FILTER = 47,
148         VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
149         VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
150         VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
151         VIRTCHNL_OP_ADD_VLAN_V2 = 52,
152         VIRTCHNL_OP_DEL_VLAN_V2 = 53,
153         VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
154         VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
155         VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56,
156         VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57,
157         VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2 = 58,
158         VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2 = 59,
159         VIRTCHNL_OP_GET_QOS_CAPS = 66,
160         VIRTCHNL_OP_CONFIG_QUEUE_TC_MAP = 67,
161         VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
162         VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
163         VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
164         VIRTCHNL_OP_MAX,
165 };
166
167 static inline const char *virtchnl_op_str(enum virtchnl_ops v_opcode)
168 {
169         switch (v_opcode) {
170         case VIRTCHNL_OP_UNKNOWN:
171                 return "VIRTCHNL_OP_UNKNOWN";
172         case VIRTCHNL_OP_VERSION:
173                 return "VIRTCHNL_OP_VERSION";
174         case VIRTCHNL_OP_RESET_VF:
175                 return "VIRTCHNL_OP_RESET_VF";
176         case VIRTCHNL_OP_GET_VF_RESOURCES:
177                 return "VIRTCHNL_OP_GET_VF_RESOURCES";
178         case VIRTCHNL_OP_CONFIG_TX_QUEUE:
179                 return "VIRTCHNL_OP_CONFIG_TX_QUEUE";
180         case VIRTCHNL_OP_CONFIG_RX_QUEUE:
181                 return "VIRTCHNL_OP_CONFIG_RX_QUEUE";
182         case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
183                 return "VIRTCHNL_OP_CONFIG_VSI_QUEUES";
184         case VIRTCHNL_OP_CONFIG_IRQ_MAP:
185                 return "VIRTCHNL_OP_CONFIG_IRQ_MAP";
186         case VIRTCHNL_OP_ENABLE_QUEUES:
187                 return "VIRTCHNL_OP_ENABLE_QUEUES";
188         case VIRTCHNL_OP_DISABLE_QUEUES:
189                 return "VIRTCHNL_OP_DISABLE_QUEUES";
190         case VIRTCHNL_OP_ADD_ETH_ADDR:
191                 return "VIRTCHNL_OP_ADD_ETH_ADDR";
192         case VIRTCHNL_OP_DEL_ETH_ADDR:
193                 return "VIRTCHNL_OP_DEL_ETH_ADDR";
194         case VIRTCHNL_OP_ADD_VLAN:
195                 return "VIRTCHNL_OP_ADD_VLAN";
196         case VIRTCHNL_OP_DEL_VLAN:
197                 return "VIRTCHNL_OP_DEL_VLAN";
198         case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
199                 return "VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE";
200         case VIRTCHNL_OP_GET_STATS:
201                 return "VIRTCHNL_OP_GET_STATS";
202         case VIRTCHNL_OP_RSVD:
203                 return "VIRTCHNL_OP_RSVD";
204         case VIRTCHNL_OP_EVENT:
205                 return "VIRTCHNL_OP_EVENT";
206         case VIRTCHNL_OP_CONFIG_RSS_KEY:
207                 return "VIRTCHNL_OP_CONFIG_RSS_KEY";
208         case VIRTCHNL_OP_CONFIG_RSS_LUT:
209                 return "VIRTCHNL_OP_CONFIG_RSS_LUT";
210         case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
211                 return "VIRTCHNL_OP_GET_RSS_HENA_CAPS";
212         case VIRTCHNL_OP_SET_RSS_HENA:
213                 return "VIRTCHNL_OP_SET_RSS_HENA";
214         case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
215                 return "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING";
216         case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
217                 return "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING";
218         case VIRTCHNL_OP_REQUEST_QUEUES:
219                 return "VIRTCHNL_OP_REQUEST_QUEUES";
220         case VIRTCHNL_OP_ENABLE_CHANNELS:
221                 return "VIRTCHNL_OP_ENABLE_CHANNELS";
222         case VIRTCHNL_OP_DISABLE_CHANNELS:
223                 return "VIRTCHNL_OP_DISABLE_CHANNELS";
224         case VIRTCHNL_OP_ADD_CLOUD_FILTER:
225                 return "VIRTCHNL_OP_ADD_CLOUD_FILTER";
226         case VIRTCHNL_OP_DEL_CLOUD_FILTER:
227                 return "VIRTCHNL_OP_DEL_CLOUD_FILTER";
228         case VIRTCHNL_OP_DCF_CMD_DESC:
229                 return "VIRTCHNL_OP_DCF_CMD_DESC";
230         case VIRTCHNL_OP_DCF_CMD_BUFF:
231                 return "VIRTCHHNL_OP_DCF_CMD_BUFF";
232         case VIRTCHNL_OP_DCF_DISABLE:
233                 return "VIRTCHNL_OP_DCF_DISABLE";
234         case VIRTCHNL_OP_DCF_GET_VSI_MAP:
235                 return "VIRTCHNL_OP_DCF_GET_VSI_MAP";
236         case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
237                 return "VIRTCHNL_OP_GET_SUPPORTED_RXDIDS";
238         case VIRTCHNL_OP_ADD_RSS_CFG:
239                 return "VIRTCHNL_OP_ADD_RSS_CFG";
240         case VIRTCHNL_OP_DEL_RSS_CFG:
241                 return "VIRTCHNL_OP_DEL_RSS_CFG";
242         case VIRTCHNL_OP_ADD_FDIR_FILTER:
243                 return "VIRTCHNL_OP_ADD_FDIR_FILTER";
244         case VIRTCHNL_OP_DEL_FDIR_FILTER:
245                 return "VIRTCHNL_OP_DEL_FDIR_FILTER";
246         case VIRTCHNL_OP_GET_MAX_RSS_QREGION:
247                 return "VIRTCHNL_OP_GET_MAX_RSS_QREGION";
248         case VIRTCHNL_OP_ENABLE_QUEUES_V2:
249                 return "VIRTCHNL_OP_ENABLE_QUEUES_V2";
250         case VIRTCHNL_OP_DISABLE_QUEUES_V2:
251                 return "VIRTCHNL_OP_DISABLE_QUEUES_V2";
252         case VIRTCHNL_OP_MAP_QUEUE_VECTOR:
253                 return "VIRTCHNL_OP_MAP_QUEUE_VECTOR";
254         case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
255                 return "VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS";
256         case VIRTCHNL_OP_ADD_VLAN_V2:
257                 return "VIRTCHNL_OP_ADD_VLAN_V2";
258         case VIRTCHNL_OP_DEL_VLAN_V2:
259                 return "VIRTCHNL_OP_DEL_VLAN_V2";
260         case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
261                 return "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2";
262         case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
263                 return "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2";
264         case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
265                 return "VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2";
266         case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
267                 return "VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2";
268         case VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2:
269                 return "VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2";
270         case VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2:
271                 return "VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2";
272         case VIRTCHNL_OP_MAX:
273                 return "VIRTCHNL_OP_MAX";
274         default:
275                 return "Unsupported (update virtchnl.h)";
276         }
277 }
278
279 /* These macros are used to generate compilation errors if a structure/union
280  * is not exactly the correct length. It gives a divide by zero error if the
281  * structure/union is not of the correct size, otherwise it creates an enum
282  * that is never used.
283  */
284 #define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \
285         { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
286 #define VIRTCHNL_CHECK_UNION_LEN(n, X) enum virtchnl_static_asset_enum_##X \
287         { virtchnl_static_assert_##X = (n)/((sizeof(union X) == (n)) ? 1 : 0) }
288
289 /* Virtual channel message descriptor. This overlays the admin queue
290  * descriptor. All other data is passed in external buffers.
291  */
292
293 struct virtchnl_msg {
294         u8 pad[8];                       /* AQ flags/opcode/len/retval fields */
295
296         /* avoid confusion with desc->opcode */
297         enum virtchnl_ops v_opcode;
298
299         /* ditto for desc->retval */
300         enum virtchnl_status_code v_retval;
301         u32 vfid;                        /* used by PF when sending to VF */
302 };
303
304 VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg);
305
306 /* Message descriptions and data structures. */
307
308 /* VIRTCHNL_OP_VERSION
309  * VF posts its version number to the PF. PF responds with its version number
310  * in the same format, along with a return code.
311  * Reply from PF has its major/minor versions also in param0 and param1.
312  * If there is a major version mismatch, then the VF cannot operate.
313  * If there is a minor version mismatch, then the VF can operate but should
314  * add a warning to the system log.
315  *
316  * This enum element MUST always be specified as == 1, regardless of other
317  * changes in the API. The PF must always respond to this message without
318  * error regardless of version mismatch.
319  */
320 #define VIRTCHNL_VERSION_MAJOR          1
321 #define VIRTCHNL_VERSION_MINOR          1
322 #define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS       0
323
324 struct virtchnl_version_info {
325         u32 major;
326         u32 minor;
327 };
328
329 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
330
331 #define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))
332 #define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
333
334 /* VIRTCHNL_OP_RESET_VF
335  * VF sends this request to PF with no parameters
336  * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
337  * until reset completion is indicated. The admin queue must be reinitialized
338  * after this operation.
339  *
340  * When reset is complete, PF must ensure that all queues in all VSIs associated
341  * with the VF are stopped, all queue configurations in the HMC are set to 0,
342  * and all MAC and VLAN filters (except the default MAC address) on all VSIs
343  * are cleared.
344  */
345
346 /* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV
347  * vsi_type should always be 6 for backward compatibility. Add other fields
348  * as needed.
349  */
350 enum virtchnl_vsi_type {
351         VIRTCHNL_VSI_TYPE_INVALID = 0,
352         VIRTCHNL_VSI_SRIOV = 6,
353 };
354
355 /* VIRTCHNL_OP_GET_VF_RESOURCES
356  * Version 1.0 VF sends this request to PF with no parameters
357  * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
358  * PF responds with an indirect message containing
359  * virtchnl_vf_resource and one or more
360  * virtchnl_vsi_resource structures.
361  */
362
363 struct virtchnl_vsi_resource {
364         u16 vsi_id;
365         u16 num_queue_pairs;
366
367         /* see enum virtchnl_vsi_type */
368         s32 vsi_type;
369         u16 qset_handle;
370         u8 default_mac_addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
371 };
372
373 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
374
375 /* VF capability flags
376  * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
377  * TX/RX Checksum offloading and TSO for non-tunnelled packets.
378  */
379 #define VIRTCHNL_VF_OFFLOAD_L2                  BIT(0)
380 #define VIRTCHNL_VF_OFFLOAD_IWARP               BIT(1)
381 #define VIRTCHNL_VF_OFFLOAD_RSVD                BIT(2)
382 #define VIRTCHNL_VF_OFFLOAD_RSS_AQ              BIT(3)
383 #define VIRTCHNL_VF_OFFLOAD_RSS_REG             BIT(4)
384 #define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR           BIT(5)
385 #define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES          BIT(6)
386 /* used to negotiate communicating link speeds in Mbps */
387 #define VIRTCHNL_VF_CAP_ADV_LINK_SPEED          BIT(7)
388         /* BIT(8) is reserved */
389 #define VIRTCHNL_VF_LARGE_NUM_QPAIRS            BIT(9)
390 #define VIRTCHNL_VF_OFFLOAD_CRC                 BIT(10)
391 #define VIRTCHNL_VF_OFFLOAD_VLAN_V2             BIT(15)
392 #define VIRTCHNL_VF_OFFLOAD_VLAN                BIT(16)
393 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING          BIT(17)
394 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2       BIT(18)
395 #define VIRTCHNL_VF_OFFLOAD_RSS_PF              BIT(19)
396 #define VIRTCHNL_VF_OFFLOAD_ENCAP               BIT(20)
397 #define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM          BIT(21)
398 #define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM       BIT(22)
399 #define VIRTCHNL_VF_OFFLOAD_ADQ                 BIT(23)
400 #define VIRTCHNL_VF_OFFLOAD_ADQ_V2              BIT(24)
401 #define VIRTCHNL_VF_OFFLOAD_USO                 BIT(25)
402 #define VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC        BIT(26)
403 #define VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF          BIT(27)
404 #define VIRTCHNL_VF_OFFLOAD_FDIR_PF             BIT(28)
405 #define VIRTCHNL_VF_OFFLOAD_QOS         BIT(29)
406 #define VIRTCHNL_VF_CAP_DCF                     BIT(30)
407         /* BIT(31) is reserved */
408
409 #define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
410                                VIRTCHNL_VF_OFFLOAD_VLAN | \
411                                VIRTCHNL_VF_OFFLOAD_RSS_PF)
412
413 struct virtchnl_vf_resource {
414         u16 num_vsis;
415         u16 num_queue_pairs;
416         u16 max_vectors;
417         u16 max_mtu;
418
419         u32 vf_cap_flags;
420         u32 rss_key_size;
421         u32 rss_lut_size;
422
423         struct virtchnl_vsi_resource vsi_res[1];
424 };
425
426 VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource);
427
428 /* VIRTCHNL_OP_CONFIG_TX_QUEUE
429  * VF sends this message to set up parameters for one TX queue.
430  * External data buffer contains one instance of virtchnl_txq_info.
431  * PF configures requested queue and returns a status code.
432  */
433
434 /* Tx queue config info */
435 struct virtchnl_txq_info {
436         u16 vsi_id;
437         u16 queue_id;
438         u16 ring_len;           /* number of descriptors, multiple of 8 */
439         u16 headwb_enabled; /* deprecated with AVF 1.0 */
440         u64 dma_ring_addr;
441         u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
442 };
443
444 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
445
446 /* RX descriptor IDs (range from 0 to 63) */
447 enum virtchnl_rx_desc_ids {
448         VIRTCHNL_RXDID_0_16B_BASE               = 0,
449         /* 32B_BASE and FLEX_SPLITQ share desc ids as default descriptors
450          * because they can be differentiated based on queue model; e.g. single
451          * queue model can only use 32B_BASE and split queue model can only use
452          * FLEX_SPLITQ.  Having these as 1 allows them to be used as default
453          * descriptors without negotiation.
454          */
455         VIRTCHNL_RXDID_1_32B_BASE               = 1,
456         VIRTCHNL_RXDID_1_FLEX_SPLITQ            = 1,
457         VIRTCHNL_RXDID_2_FLEX_SQ_NIC            = 2,
458         VIRTCHNL_RXDID_3_FLEX_SQ_SW             = 3,
459         VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB        = 4,
460         VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL        = 5,
461         VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2          = 6,
462         VIRTCHNL_RXDID_7_HW_RSVD                = 7,
463         /* 9 through 15 are reserved */
464         VIRTCHNL_RXDID_16_COMMS_GENERIC         = 16,
465         VIRTCHNL_RXDID_17_COMMS_AUX_VLAN        = 17,
466         VIRTCHNL_RXDID_18_COMMS_AUX_IPV4        = 18,
467         VIRTCHNL_RXDID_19_COMMS_AUX_IPV6        = 19,
468         VIRTCHNL_RXDID_20_COMMS_AUX_FLOW        = 20,
469         VIRTCHNL_RXDID_21_COMMS_AUX_TCP         = 21,
470         /* 22 through 63 are reserved */
471 };
472
473 /* RX descriptor ID bitmasks */
474 enum virtchnl_rx_desc_id_bitmasks {
475         VIRTCHNL_RXDID_0_16B_BASE_M             = BIT(VIRTCHNL_RXDID_0_16B_BASE),
476         VIRTCHNL_RXDID_1_32B_BASE_M             = BIT(VIRTCHNL_RXDID_1_32B_BASE),
477         VIRTCHNL_RXDID_1_FLEX_SPLITQ_M          = BIT(VIRTCHNL_RXDID_1_FLEX_SPLITQ),
478         VIRTCHNL_RXDID_2_FLEX_SQ_NIC_M          = BIT(VIRTCHNL_RXDID_2_FLEX_SQ_NIC),
479         VIRTCHNL_RXDID_3_FLEX_SQ_SW_M           = BIT(VIRTCHNL_RXDID_3_FLEX_SQ_SW),
480         VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB_M      = BIT(VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB),
481         VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL_M      = BIT(VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL),
482         VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2_M        = BIT(VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2),
483         VIRTCHNL_RXDID_7_HW_RSVD_M              = BIT(VIRTCHNL_RXDID_7_HW_RSVD),
484         /* 9 through 15 are reserved */
485         VIRTCHNL_RXDID_16_COMMS_GENERIC_M       = BIT(VIRTCHNL_RXDID_16_COMMS_GENERIC),
486         VIRTCHNL_RXDID_17_COMMS_AUX_VLAN_M      = BIT(VIRTCHNL_RXDID_17_COMMS_AUX_VLAN),
487         VIRTCHNL_RXDID_18_COMMS_AUX_IPV4_M      = BIT(VIRTCHNL_RXDID_18_COMMS_AUX_IPV4),
488         VIRTCHNL_RXDID_19_COMMS_AUX_IPV6_M      = BIT(VIRTCHNL_RXDID_19_COMMS_AUX_IPV6),
489         VIRTCHNL_RXDID_20_COMMS_AUX_FLOW_M      = BIT(VIRTCHNL_RXDID_20_COMMS_AUX_FLOW),
490         VIRTCHNL_RXDID_21_COMMS_AUX_TCP_M       = BIT(VIRTCHNL_RXDID_21_COMMS_AUX_TCP),
491         /* 22 through 63 are reserved */
492 };
493
494 /* VIRTCHNL_OP_CONFIG_RX_QUEUE
495  * VF sends this message to set up parameters for one RX queue.
496  * External data buffer contains one instance of virtchnl_rxq_info.
497  * PF configures requested queue and returns a status code. The
498  * crc_disable flag disables CRC stripping on the VF. Setting
499  * the crc_disable flag to 1 will disable CRC stripping for each
500  * queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC
501  * offload must have been set prior to sending this info or the PF
502  * will ignore the request. This flag should be set the same for
503  * all of the queues for a VF.
504  */
505
506 /* Rx queue config info */
507 struct virtchnl_rxq_info {
508         u16 vsi_id;
509         u16 queue_id;
510         u32 ring_len;           /* number of descriptors, multiple of 32 */
511         u16 hdr_size;
512         u16 splithdr_enabled; /* deprecated with AVF 1.0 */
513         u32 databuffer_size;
514         u32 max_pkt_size;
515         u8 crc_disable;
516         /* see enum virtchnl_rx_desc_ids;
517          * only used when VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is supported. Note
518          * that when the offload is not supported, the descriptor format aligns
519          * with VIRTCHNL_RXDID_1_32B_BASE.
520          */
521         u8 rxdid;
522         u8 pad1[2];
523         u64 dma_ring_addr;
524
525         /* see enum virtchnl_rx_hsplit; deprecated with AVF 1.0 */
526         s32 rx_split_pos;
527         u32 pad2;
528 };
529
530 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
531
532 /* VIRTCHNL_OP_CONFIG_VSI_QUEUES
533  * VF sends this message to set parameters for active TX and RX queues
534  * associated with the specified VSI.
535  * PF configures queues and returns status.
536  * If the number of queues specified is greater than the number of queues
537  * associated with the VSI, an error is returned and no queues are configured.
538  * NOTE: The VF is not required to configure all queues in a single request.
539  * It may send multiple messages. PF drivers must correctly handle all VF
540  * requests.
541  */
542 struct virtchnl_queue_pair_info {
543         /* NOTE: vsi_id and queue_id should be identical for both queues. */
544         struct virtchnl_txq_info txq;
545         struct virtchnl_rxq_info rxq;
546 };
547
548 VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
549
550 struct virtchnl_vsi_queue_config_info {
551         u16 vsi_id;
552         u16 num_queue_pairs;
553         u32 pad;
554         struct virtchnl_queue_pair_info qpair[1];
555 };
556
557 VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info);
558
559 /* VIRTCHNL_OP_REQUEST_QUEUES
560  * VF sends this message to request the PF to allocate additional queues to
561  * this VF.  Each VF gets a guaranteed number of queues on init but asking for
562  * additional queues must be negotiated.  This is a best effort request as it
563  * is possible the PF does not have enough queues left to support the request.
564  * If the PF cannot support the number requested it will respond with the
565  * maximum number it is able to support.  If the request is successful, PF will
566  * then reset the VF to institute required changes.
567  */
568
569 /* VF resource request */
570 struct virtchnl_vf_res_request {
571         u16 num_queue_pairs;
572 };
573
574 /* VIRTCHNL_OP_CONFIG_IRQ_MAP
575  * VF uses this message to map vectors to queues.
576  * The rxq_map and txq_map fields are bitmaps used to indicate which queues
577  * are to be associated with the specified vector.
578  * The "other" causes are always mapped to vector 0. The VF may not request
579  * that vector 0 be used for traffic.
580  * PF configures interrupt mapping and returns status.
581  * NOTE: due to hardware requirements, all active queues (both TX and RX)
582  * should be mapped to interrupts, even if the driver intends to operate
583  * only in polling mode. In this case the interrupt may be disabled, but
584  * the ITR timer will still run to trigger writebacks.
585  */
586 struct virtchnl_vector_map {
587         u16 vsi_id;
588         u16 vector_id;
589         u16 rxq_map;
590         u16 txq_map;
591         u16 rxitr_idx;
592         u16 txitr_idx;
593 };
594
595 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
596
597 struct virtchnl_irq_map_info {
598         u16 num_vectors;
599         struct virtchnl_vector_map vecmap[1];
600 };
601
602 VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info);
603
604 /* VIRTCHNL_OP_ENABLE_QUEUES
605  * VIRTCHNL_OP_DISABLE_QUEUES
606  * VF sends these message to enable or disable TX/RX queue pairs.
607  * The queues fields are bitmaps indicating which queues to act upon.
608  * (Currently, we only support 16 queues per VF, but we make the field
609  * u32 to allow for expansion.)
610  * PF performs requested action and returns status.
611  * NOTE: The VF is not required to enable/disable all queues in a single
612  * request. It may send multiple messages.
613  * PF drivers must correctly handle all VF requests.
614  */
615 struct virtchnl_queue_select {
616         u16 vsi_id;
617         u16 pad;
618         u32 rx_queues;
619         u32 tx_queues;
620 };
621
622 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
623
624 /* VIRTCHNL_OP_GET_MAX_RSS_QREGION
625  *
626  * if VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
627  * then this op must be supported.
628  *
629  * VF sends this message in order to query the max RSS queue region
630  * size supported by PF, when VIRTCHNL_VF_LARGE_NUM_QPAIRS is enabled.
631  * This information should be used when configuring the RSS LUT and/or
632  * configuring queue region based filters.
633  *
634  * The maximum RSS queue region is 2^qregion_width. So, a qregion_width
635  * of 6 would inform the VF that the PF supports a maximum RSS queue region
636  * of 64.
637  *
638  * A queue region represents a range of queues that can be used to configure
639  * a RSS LUT. For example, if a VF is given 64 queues, but only a max queue
640  * region size of 16 (i.e. 2^qregion_width = 16) then it will only be able
641  * to configure the RSS LUT with queue indices from 0 to 15. However, other
642  * filters can be used to direct packets to queues >15 via specifying a queue
643  * base/offset and queue region width.
644  */
645 struct virtchnl_max_rss_qregion {
646         u16 vport_id;
647         u16 qregion_width;
648         u8 pad[4];
649 };
650
651 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_max_rss_qregion);
652
653 /* VIRTCHNL_OP_ADD_ETH_ADDR
654  * VF sends this message in order to add one or more unicast or multicast
655  * address filters for the specified VSI.
656  * PF adds the filters and returns status.
657  */
658
659 /* VIRTCHNL_OP_DEL_ETH_ADDR
660  * VF sends this message in order to remove one or more unicast or multicast
661  * filters for the specified VSI.
662  * PF removes the filters and returns status.
663  */
664
665 /* VIRTCHNL_ETHER_ADDR_LEGACY
666  * Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad
667  * bytes. Moving forward all VF drivers should not set type to
668  * VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy
669  * behavior. The control plane function (i.e. PF) can use a best effort method
670  * of tracking the primary/device unicast in this case, but there is no
671  * guarantee and functionality depends on the implementation of the PF.
672  */
673
674 /* VIRTCHNL_ETHER_ADDR_PRIMARY
675  * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the
676  * primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and
677  * VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane
678  * function (i.e. PF) to accurately track and use this MAC address for
679  * displaying on the host and for VM/function reset.
680  */
681
682 /* VIRTCHNL_ETHER_ADDR_EXTRA
683  * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra
684  * unicast and/or multicast filters that are being added/deleted via
685  * VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively.
686  */
687 struct virtchnl_ether_addr {
688         u8 addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
689         u8 type;
690 #define VIRTCHNL_ETHER_ADDR_LEGACY      0
691 #define VIRTCHNL_ETHER_ADDR_PRIMARY     1
692 #define VIRTCHNL_ETHER_ADDR_EXTRA       2
693 #define VIRTCHNL_ETHER_ADDR_TYPE_MASK   3 /* first two bits of type are valid */
694         u8 pad;
695 };
696
697 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
698
699 struct virtchnl_ether_addr_list {
700         u16 vsi_id;
701         u16 num_elements;
702         struct virtchnl_ether_addr list[1];
703 };
704
705 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list);
706
707 /* VIRTCHNL_OP_ADD_VLAN
708  * VF sends this message to add one or more VLAN tag filters for receives.
709  * PF adds the filters and returns status.
710  * If a port VLAN is configured by the PF, this operation will return an
711  * error to the VF.
712  */
713
714 /* VIRTCHNL_OP_DEL_VLAN
715  * VF sends this message to remove one or more VLAN tag filters for receives.
716  * PF removes the filters and returns status.
717  * If a port VLAN is configured by the PF, this operation will return an
718  * error to the VF.
719  */
720
721 struct virtchnl_vlan_filter_list {
722         u16 vsi_id;
723         u16 num_elements;
724         u16 vlan_id[1];
725 };
726
727 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
728
729 /* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
730  * structures and opcodes.
731  *
732  * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
733  * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
734  *
735  * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
736  * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
737  * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
738  *
739  * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
740  * by the PF concurrently. For example, if the PF can support
741  * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
742  * would OR the following bits:
743  *
744  *      VIRTHCNL_VLAN_ETHERTYPE_8100 |
745  *      VIRTCHNL_VLAN_ETHERTYPE_88A8 |
746  *      VIRTCHNL_VLAN_ETHERTYPE_AND;
747  *
748  * The VF would interpret this as VLAN filtering can be supported on both 0x8100
749  * and 0x88A8 VLAN ethertypes.
750  *
751  * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
752  * by the PF concurrently. For example if the PF can support
753  * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
754  * offload it would OR the following bits:
755  *
756  *      VIRTCHNL_VLAN_ETHERTYPE_8100 |
757  *      VIRTCHNL_VLAN_ETHERTYPE_88A8 |
758  *      VIRTCHNL_VLAN_ETHERTYPE_XOR;
759  *
760  * The VF would interpret this as VLAN stripping can be supported on either
761  * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
762  * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
763  * the previously set value.
764  *
765  * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or
766  * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors.
767  *
768  * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware
769  * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor.
770  *
771  * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware
772  * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor.
773  *
774  * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
775  * VLAN filtering if the underlying PF supports it.
776  *
777  * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
778  * certain VLAN capability can be toggled. For example if the underlying PF/CP
779  * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
780  * set this bit along with the supported ethertypes.
781  */
782 enum virtchnl_vlan_support {
783         VIRTCHNL_VLAN_UNSUPPORTED =             0,
784         VIRTCHNL_VLAN_ETHERTYPE_8100 =          0x00000001,
785         VIRTCHNL_VLAN_ETHERTYPE_88A8 =          0x00000002,
786         VIRTCHNL_VLAN_ETHERTYPE_9100 =          0x00000004,
787         VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 =     0x00000100,
788         VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 =     0x00000200,
789         VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 =   0x00000400,
790         VIRTCHNL_VLAN_PRIO =                    0x01000000,
791         VIRTCHNL_VLAN_FILTER_MASK =             0x10000000,
792         VIRTCHNL_VLAN_ETHERTYPE_AND =           0x20000000,
793         VIRTCHNL_VLAN_ETHERTYPE_XOR =           0x40000000,
794         VIRTCHNL_VLAN_TOGGLE =                  0x80000000
795 };
796
797 /* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
798  * for filtering, insertion, and stripping capabilities.
799  *
800  * If only outer capabilities are supported (for filtering, insertion, and/or
801  * stripping) then this refers to the outer most or single VLAN from the VF's
802  * perspective.
803  *
804  * If only inner capabilities are supported (for filtering, insertion, and/or
805  * stripping) then this refers to the outer most or single VLAN from the VF's
806  * perspective. Functionally this is the same as if only outer capabilities are
807  * supported. The VF driver is just forced to use the inner fields when
808  * adding/deleting filters and enabling/disabling offloads (if supported).
809  *
810  * If both outer and inner capabilities are supported (for filtering, insertion,
811  * and/or stripping) then outer refers to the outer most or single VLAN and
812  * inner refers to the second VLAN, if it exists, in the packet.
813  *
814  * There is no support for tunneled VLAN offloads, so outer or inner are never
815  * referring to a tunneled packet from the VF's perspective.
816  */
817 struct virtchnl_vlan_supported_caps {
818         u32 outer;
819         u32 inner;
820 };
821
822 /* The PF populates these fields based on the supported VLAN filtering. If a
823  * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
824  * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
825  * the unsupported fields.
826  *
827  * Also, a VF is only allowed to toggle its VLAN filtering setting if the
828  * VIRTCHNL_VLAN_TOGGLE bit is set.
829  *
830  * The ethertype(s) specified in the ethertype_init field are the ethertypes
831  * enabled for VLAN filtering. VLAN filtering in this case refers to the outer
832  * most VLAN from the VF's perspective. If both inner and outer filtering are
833  * allowed then ethertype_init only refers to the outer most VLAN as only
834  * VLAN ethertype supported for inner VLAN filtering is
835  * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled
836  * when both inner and outer filtering are allowed.
837  *
838  * The max_filters field tells the VF how many VLAN filters it's allowed to have
839  * at any one time. If it exceeds this amount and tries to add another filter,
840  * then the request will be rejected by the PF. To prevent failures, the VF
841  * should keep track of how many VLAN filters it has added and not attempt to
842  * add more than max_filters.
843  */
844 struct virtchnl_vlan_filtering_caps {
845         struct virtchnl_vlan_supported_caps filtering_support;
846         u32 ethertype_init;
847         u16 max_filters;
848         u8 pad[2];
849 };
850
851 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps);
852
853 /* This enum is used for the virtchnl_vlan_offload_caps structure to specify
854  * if the PF supports a different ethertype for stripping and insertion.
855  *
856  * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
857  * for stripping affect the ethertype(s) specified for insertion and visa versa
858  * as well. If the VF tries to configure VLAN stripping via
859  * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
860  * that will be the ethertype for both stripping and insertion.
861  *
862  * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
863  * stripping do not affect the ethertype(s) specified for insertion and visa
864  * versa.
865  */
866 enum virtchnl_vlan_ethertype_match {
867         VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
868         VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
869 };
870
871 /* The PF populates these fields based on the supported VLAN offloads. If a
872  * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
873  * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
874  * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
875  *
876  * Also, a VF is only allowed to toggle its VLAN offload setting if the
877  * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set.
878  *
879  * The VF driver needs to be aware of how the tags are stripped by hardware and
880  * inserted by the VF driver based on the level of offload support. The PF will
881  * populate these fields based on where the VLAN tags are expected to be
882  * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to
883  * interpret these fields. See the definition of the
884  * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support
885  * enumeration.
886  */
887 struct virtchnl_vlan_offload_caps {
888         struct virtchnl_vlan_supported_caps stripping_support;
889         struct virtchnl_vlan_supported_caps insertion_support;
890         u32 ethertype_init;
891         u8 ethertype_match;
892         u8 pad[3];
893 };
894
895 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps);
896
897 /* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
898  * VF sends this message to determine its VLAN capabilities.
899  *
900  * PF will mark which capabilities it supports based on hardware support and
901  * current configuration. For example, if a port VLAN is configured the PF will
902  * not allow outer VLAN filtering, stripping, or insertion to be configured so
903  * it will block these features from the VF.
904  *
905  * The VF will need to cross reference its capabilities with the PFs
906  * capabilities in the response message from the PF to determine the VLAN
907  * support.
908  */
909 struct virtchnl_vlan_caps {
910         struct virtchnl_vlan_filtering_caps filtering;
911         struct virtchnl_vlan_offload_caps offloads;
912 };
913
914 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps);
915
916 struct virtchnl_vlan {
917         u16 tci;        /* tci[15:13] = PCP and tci[11:0] = VID */
918         u16 tci_mask;   /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in
919                          * filtering caps
920                          */
921         u16 tpid;       /* 0x8100, 0x88a8, etc. and only type(s) set in
922                          * filtering caps. Note that tpid here does not refer to
923                          * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the
924                          * actual 2-byte VLAN TPID
925                          */
926         u8 pad[2];
927 };
928
929 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
930
931 struct virtchnl_vlan_filter {
932         struct virtchnl_vlan inner;
933         struct virtchnl_vlan outer;
934         u8 pad[16];
935 };
936
937 VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
938
939 /* VIRTCHNL_OP_ADD_VLAN_V2
940  * VIRTCHNL_OP_DEL_VLAN_V2
941  *
942  * VF sends these messages to add/del one or more VLAN tag filters for Rx
943  * traffic.
944  *
945  * The PF attempts to add the filters and returns status.
946  *
947  * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
948  * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
949  */
950 struct virtchnl_vlan_filter_list_v2 {
951         u16 vport_id;
952         u16 num_elements;
953         u8 pad[4];
954         struct virtchnl_vlan_filter filters[1];
955 };
956
957 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
958
959 /* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
960  * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
961  * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2
962  * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2
963  *
964  * VF sends this message to enable or disable VLAN stripping or insertion. It
965  * also needs to specify an ethertype. The VF knows which VLAN ethertypes are
966  * allowed and whether or not it's allowed to enable/disable the specific
967  * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
968  * parse the virtchnl_vlan_caps.offloads fields to determine which offload
969  * messages are allowed.
970  *
971  * For example, if the PF populates the virtchnl_vlan_caps.offloads in the
972  * following manner the VF will be allowed to enable and/or disable 0x8100 inner
973  * VLAN insertion and/or stripping via the opcodes listed above. Inner in this
974  * case means the outer most or single VLAN from the VF's perspective. This is
975  * because no outer offloads are supported. See the comments above the
976  * virtchnl_vlan_supported_caps structure for more details.
977  *
978  * virtchnl_vlan_caps.offloads.stripping_support.inner =
979  *                      VIRTCHNL_VLAN_TOGGLE |
980  *                      VIRTCHNL_VLAN_ETHERTYPE_8100;
981  *
982  * virtchnl_vlan_caps.offloads.insertion_support.inner =
983  *                      VIRTCHNL_VLAN_TOGGLE |
984  *                      VIRTCHNL_VLAN_ETHERTYPE_8100;
985  *
986  * In order to enable inner (again note that in this case inner is the outer
987  * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100
988  * VLANs, the VF would populate the virtchnl_vlan_setting structure in the
989  * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
990  *
991  * virtchnl_vlan_setting.inner_ethertype_setting =
992  *                      VIRTCHNL_VLAN_ETHERTYPE_8100;
993  *
994  * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
995  * initialization.
996  *
997  * The reason that VLAN TPID(s) are not being used for the
998  * outer_ethertype_setting and inner_ethertype_setting fields is because it's
999  * possible a device could support VLAN insertion and/or stripping offload on
1000  * multiple ethertypes concurrently, so this method allows a VF to request
1001  * multiple ethertypes in one message using the virtchnl_vlan_support
1002  * enumeration.
1003  *
1004  * For example, if the PF populates the virtchnl_vlan_caps.offloads in the
1005  * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer
1006  * VLAN insertion and stripping simultaneously. The
1007  * virtchnl_vlan_caps.offloads.ethertype_match field will also have to be
1008  * populated based on what the PF can support.
1009  *
1010  * virtchnl_vlan_caps.offloads.stripping_support.outer =
1011  *                      VIRTCHNL_VLAN_TOGGLE |
1012  *                      VIRTCHNL_VLAN_ETHERTYPE_8100 |
1013  *                      VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1014  *                      VIRTCHNL_VLAN_ETHERTYPE_AND;
1015  *
1016  * virtchnl_vlan_caps.offloads.insertion_support.outer =
1017  *                      VIRTCHNL_VLAN_TOGGLE |
1018  *                      VIRTCHNL_VLAN_ETHERTYPE_8100 |
1019  *                      VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1020  *                      VIRTCHNL_VLAN_ETHERTYPE_AND;
1021  *
1022  * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF
1023  * would populate the virthcnl_vlan_offload_structure in the following manner
1024  * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
1025  *
1026  * virtchnl_vlan_setting.outer_ethertype_setting =
1027  *                      VIRTHCNL_VLAN_ETHERTYPE_8100 |
1028  *                      VIRTHCNL_VLAN_ETHERTYPE_88A8;
1029  *
1030  * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
1031  * initialization.
1032  *
1033  * There is also the case where a PF and the underlying hardware can support
1034  * VLAN offloads on multiple ethertypes, but not concurrently. For example, if
1035  * the PF populates the virtchnl_vlan_caps.offloads in the following manner the
1036  * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN
1037  * offloads. The ethertypes must match for stripping and insertion.
1038  *
1039  * virtchnl_vlan_caps.offloads.stripping_support.outer =
1040  *                      VIRTCHNL_VLAN_TOGGLE |
1041  *                      VIRTCHNL_VLAN_ETHERTYPE_8100 |
1042  *                      VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1043  *                      VIRTCHNL_VLAN_ETHERTYPE_XOR;
1044  *
1045  * virtchnl_vlan_caps.offloads.insertion_support.outer =
1046  *                      VIRTCHNL_VLAN_TOGGLE |
1047  *                      VIRTCHNL_VLAN_ETHERTYPE_8100 |
1048  *                      VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1049  *                      VIRTCHNL_VLAN_ETHERTYPE_XOR;
1050  *
1051  * virtchnl_vlan_caps.offloads.ethertype_match =
1052  *                      VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION;
1053  *
1054  * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would
1055  * populate the virtchnl_vlan_setting structure in the following manner and send
1056  * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the
1057  * ethertype for VLAN insertion if it's enabled. So, for completeness, a
1058  * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent.
1059  *
1060  * virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8;
1061  *
1062  * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
1063  * initialization.
1064  *
1065  * VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2
1066  * VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2
1067  *
1068  * VF sends this message to enable or disable VLAN filtering. It also needs to
1069  * specify an ethertype. The VF knows which VLAN ethertypes are allowed and
1070  * whether or not it's allowed to enable/disable filtering via the
1071  * VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
1072  * parse the virtchnl_vlan_caps.filtering fields to determine which, if any,
1073  * filtering messages are allowed.
1074  *
1075  * For example, if the PF populates the virtchnl_vlan_caps.filtering in the
1076  * following manner the VF will be allowed to enable/disable 0x8100 and 0x88a8
1077  * outer VLAN filtering together. Note, that the VIRTCHNL_VLAN_ETHERTYPE_AND
1078  * means that all filtering ethertypes will to be enabled and disabled together
1079  * regardless of the request from the VF. This means that the underlying
1080  * hardware only supports VLAN filtering for all VLAN the specified ethertypes
1081  * or none of them.
1082  *
1083  * virtchnl_vlan_caps.filtering.filtering_support.outer =
1084  *                      VIRTCHNL_VLAN_TOGGLE |
1085  *                      VIRTCHNL_VLAN_ETHERTYPE_8100 |
1086  *                      VIRTHCNL_VLAN_ETHERTYPE_88A8 |
1087  *                      VIRTCHNL_VLAN_ETHERTYPE_9100 |
1088  *                      VIRTCHNL_VLAN_ETHERTYPE_AND;
1089  *
1090  * In order to enable outer VLAN filtering for 0x88a8 and 0x8100 VLANs (0x9100
1091  * VLANs aren't supported by the VF driver), the VF would populate the
1092  * virtchnl_vlan_setting structure in the following manner and send the
1093  * VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2. The same message format would be used
1094  * to disable outer VLAN filtering for 0x88a8 and 0x8100 VLANs, but the
1095  * VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2 opcode is used.
1096  *
1097  * virtchnl_vlan_setting.outer_ethertype_setting =
1098  *                      VIRTCHNL_VLAN_ETHERTYPE_8100 |
1099  *                      VIRTCHNL_VLAN_ETHERTYPE_88A8;
1100  *
1101  */
1102 struct virtchnl_vlan_setting {
1103         u32 outer_ethertype_setting;
1104         u32 inner_ethertype_setting;
1105         u16 vport_id;
1106         u8 pad[6];
1107 };
1108
1109 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting);
1110
1111 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
1112  * VF sends VSI id and flags.
1113  * PF returns status code in retval.
1114  * Note: we assume that broadcast accept mode is always enabled.
1115  */
1116 struct virtchnl_promisc_info {
1117         u16 vsi_id;
1118         u16 flags;
1119 };
1120
1121 VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
1122
1123 #define FLAG_VF_UNICAST_PROMISC 0x00000001
1124 #define FLAG_VF_MULTICAST_PROMISC       0x00000002
1125
1126 /* VIRTCHNL_OP_GET_STATS
1127  * VF sends this message to request stats for the selected VSI. VF uses
1128  * the virtchnl_queue_select struct to specify the VSI. The queue_id
1129  * field is ignored by the PF.
1130  *
1131  * PF replies with struct virtchnl_eth_stats in an external buffer.
1132  */
1133
1134 struct virtchnl_eth_stats {
1135         u64 rx_bytes;                   /* received bytes */
1136         u64 rx_unicast;                 /* received unicast pkts */
1137         u64 rx_multicast;               /* received multicast pkts */
1138         u64 rx_broadcast;               /* received broadcast pkts */
1139         u64 rx_discards;
1140         u64 rx_unknown_protocol;
1141         u64 tx_bytes;                   /* transmitted bytes */
1142         u64 tx_unicast;                 /* transmitted unicast pkts */
1143         u64 tx_multicast;               /* transmitted multicast pkts */
1144         u64 tx_broadcast;               /* transmitted broadcast pkts */
1145         u64 tx_discards;
1146         u64 tx_errors;
1147 };
1148
1149 /* VIRTCHNL_OP_CONFIG_RSS_KEY
1150  * VIRTCHNL_OP_CONFIG_RSS_LUT
1151  * VF sends these messages to configure RSS. Only supported if both PF
1152  * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during
1153  * configuration negotiation. If this is the case, then the RSS fields in
1154  * the VF resource struct are valid.
1155  * Both the key and LUT are initialized to 0 by the PF, meaning that
1156  * RSS is effectively disabled until set up by the VF.
1157  */
1158 struct virtchnl_rss_key {
1159         u16 vsi_id;
1160         u16 key_len;
1161         u8 key[1];         /* RSS hash key, packed bytes */
1162 };
1163
1164 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key);
1165
1166 struct virtchnl_rss_lut {
1167         u16 vsi_id;
1168         u16 lut_entries;
1169         u8 lut[1];        /* RSS lookup table */
1170 };
1171
1172 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut);
1173
1174 /* VIRTCHNL_OP_GET_RSS_HENA_CAPS
1175  * VIRTCHNL_OP_SET_RSS_HENA
1176  * VF sends these messages to get and set the hash filter enable bits for RSS.
1177  * By default, the PF sets these to all possible traffic types that the
1178  * hardware supports. The VF can query this value if it wants to change the
1179  * traffic types that are hashed by the hardware.
1180  */
1181 struct virtchnl_rss_hena {
1182         u64 hena;
1183 };
1184
1185 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena);
1186
1187 /* Type of RSS algorithm */
1188 enum virtchnl_rss_algorithm {
1189         VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC    = 0,
1190         VIRTCHNL_RSS_ALG_XOR_ASYMMETRIC         = 1,
1191         VIRTCHNL_RSS_ALG_TOEPLITZ_SYMMETRIC     = 2,
1192         VIRTCHNL_RSS_ALG_XOR_SYMMETRIC          = 3,
1193 };
1194
1195 /* This is used by PF driver to enforce how many channels can be supported.
1196  * When ADQ_V2 capability is negotiated, it will allow 16 channels otherwise
1197  * PF driver will allow only max 4 channels
1198  */
1199 #define VIRTCHNL_MAX_ADQ_CHANNELS 4
1200 #define VIRTCHNL_MAX_ADQ_V2_CHANNELS 16
1201
1202 /* VIRTCHNL_OP_ENABLE_CHANNELS
1203  * VIRTCHNL_OP_DISABLE_CHANNELS
1204  * VF sends these messages to enable or disable channels based on
1205  * the user specified queue count and queue offset for each traffic class.
1206  * This struct encompasses all the information that the PF needs from
1207  * VF to create a channel.
1208  */
1209 struct virtchnl_channel_info {
1210         u16 count; /* number of queues in a channel */
1211         u16 offset; /* queues in a channel start from 'offset' */
1212         u32 pad;
1213         u64 max_tx_rate;
1214 };
1215
1216 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_channel_info);
1217
1218 struct virtchnl_tc_info {
1219         u32     num_tc;
1220         u32     pad;
1221         struct  virtchnl_channel_info list[1];
1222 };
1223
1224 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_tc_info);
1225
1226 /* VIRTCHNL_ADD_CLOUD_FILTER
1227  * VIRTCHNL_DEL_CLOUD_FILTER
1228  * VF sends these messages to add or delete a cloud filter based on the
1229  * user specified match and action filters. These structures encompass
1230  * all the information that the PF needs from the VF to add/delete a
1231  * cloud filter.
1232  */
1233
1234 struct virtchnl_l4_spec {
1235         u8      src_mac[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
1236         u8      dst_mac[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
1237         /* vlan_prio is part of this 16 bit field even from OS perspective
1238          * vlan_id:12 is actual vlan_id, then vlanid:bit14..12 is vlan_prio
1239          * in future, when decided to offload vlan_prio, pass that information
1240          * as part of the "vlan_id" field, Bit14..12
1241          */
1242         __be16  vlan_id;
1243         __be16  pad; /* reserved for future use */
1244         __be32  src_ip[4];
1245         __be32  dst_ip[4];
1246         __be16  src_port;
1247         __be16  dst_port;
1248 };
1249
1250 VIRTCHNL_CHECK_STRUCT_LEN(52, virtchnl_l4_spec);
1251
1252 union virtchnl_flow_spec {
1253         struct  virtchnl_l4_spec tcp_spec;
1254         u8      buffer[128]; /* reserved for future use */
1255 };
1256
1257 VIRTCHNL_CHECK_UNION_LEN(128, virtchnl_flow_spec);
1258
1259 enum virtchnl_action {
1260         /* action types */
1261         VIRTCHNL_ACTION_DROP = 0,
1262         VIRTCHNL_ACTION_TC_REDIRECT,
1263         VIRTCHNL_ACTION_PASSTHRU,
1264         VIRTCHNL_ACTION_QUEUE,
1265         VIRTCHNL_ACTION_Q_REGION,
1266         VIRTCHNL_ACTION_MARK,
1267         VIRTCHNL_ACTION_COUNT,
1268 };
1269
1270 enum virtchnl_flow_type {
1271         /* flow types */
1272         VIRTCHNL_TCP_V4_FLOW = 0,
1273         VIRTCHNL_TCP_V6_FLOW,
1274         VIRTCHNL_UDP_V4_FLOW,
1275         VIRTCHNL_UDP_V6_FLOW,
1276 };
1277
1278 struct virtchnl_filter {
1279         union   virtchnl_flow_spec data;
1280         union   virtchnl_flow_spec mask;
1281
1282         /* see enum virtchnl_flow_type */
1283         s32     flow_type;
1284
1285         /* see enum virtchnl_action */
1286         s32     action;
1287         u32     action_meta;
1288         u8      field_flags;
1289 };
1290
1291 VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
1292
1293 struct virtchnl_shaper_bw {
1294         /* Unit is Kbps */
1295         u32 committed;
1296         u32 peak;
1297 };
1298
1299 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_shaper_bw);
1300
1301 /* VIRTCHNL_OP_DCF_GET_VSI_MAP
1302  * VF sends this message to get VSI mapping table.
1303  * PF responds with an indirect message containing VF's
1304  * HW VSI IDs.
1305  * The index of vf_vsi array is the logical VF ID, the
1306  * value of vf_vsi array is the VF's HW VSI ID with its
1307  * valid configuration.
1308  */
1309 struct virtchnl_dcf_vsi_map {
1310         u16 pf_vsi;     /* PF's HW VSI ID */
1311         u16 num_vfs;    /* The actual number of VFs allocated */
1312 #define VIRTCHNL_DCF_VF_VSI_ID_S        0
1313 #define VIRTCHNL_DCF_VF_VSI_ID_M        (0xFFF << VIRTCHNL_DCF_VF_VSI_ID_S)
1314 #define VIRTCHNL_DCF_VF_VSI_VALID       BIT(15)
1315         u16 vf_vsi[1];
1316 };
1317
1318 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_dcf_vsi_map);
1319
1320 #define PKG_NAME_SIZE   32
1321 #define DSN_SIZE        8
1322
1323 struct pkg_version {
1324         u8 major;
1325         u8 minor;
1326         u8 update;
1327         u8 draft;
1328 };
1329
1330 VIRTCHNL_CHECK_STRUCT_LEN(4, pkg_version);
1331
1332 struct virtchnl_pkg_info {
1333         struct pkg_version pkg_ver;
1334         u32 track_id;
1335         char pkg_name[PKG_NAME_SIZE];
1336         u8 dsn[DSN_SIZE];
1337 };
1338
1339 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
1340
1341 /* VIRTCHNL_OP_DCF_VLAN_OFFLOAD
1342  * DCF negotiates the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability firstly to get
1343  * the double VLAN configuration, then DCF sends this message to configure the
1344  * outer or inner VLAN offloads (insertion and strip) for the target VF.
1345  */
1346 struct virtchnl_dcf_vlan_offload {
1347         u16 vf_id;
1348         u16 tpid;
1349         u16 vlan_flags;
1350 #define VIRTCHNL_DCF_VLAN_TYPE_S                0
1351 #define VIRTCHNL_DCF_VLAN_TYPE_M                \
1352                         (0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
1353 #define VIRTCHNL_DCF_VLAN_TYPE_INNER            0x0
1354 #define VIRTCHNL_DCF_VLAN_TYPE_OUTER            0x1
1355 #define VIRTCHNL_DCF_VLAN_INSERT_MODE_S         1
1356 #define VIRTCHNL_DCF_VLAN_INSERT_MODE_M \
1357                         (0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
1358 #define VIRTCHNL_DCF_VLAN_INSERT_DISABLE        0x1
1359 #define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED     0x2
1360 #define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC    0x3
1361 #define VIRTCHNL_DCF_VLAN_STRIP_MODE_S          4
1362 #define VIRTCHNL_DCF_VLAN_STRIP_MODE_M          \
1363                         (0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
1364 #define VIRTCHNL_DCF_VLAN_STRIP_DISABLE         0x1
1365 #define VIRTCHNL_DCF_VLAN_STRIP_ONLY            0x2
1366 #define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC    0x3
1367         u16 vlan_id;
1368         u16 pad[4];
1369 };
1370
1371 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_dcf_vlan_offload);
1372
1373 struct virtchnl_dcf_bw_cfg {
1374         u8 tc_num;
1375 #define VIRTCHNL_DCF_BW_CIR             BIT(0)
1376 #define VIRTCHNL_DCF_BW_PIR             BIT(1)
1377         u8 bw_type;
1378         u8 pad[2];
1379         enum virtchnl_bw_limit_type type;
1380         union {
1381                 struct virtchnl_shaper_bw shaper;
1382                 u8 pad2[32];
1383         };
1384 };
1385
1386 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_dcf_bw_cfg);
1387
1388 /* VIRTCHNL_OP_DCF_CONFIG_BW
1389  * VF send this message to set the bandwidth configuration of each
1390  * TC with a specific vf id. The flag node_type is to indicate that
1391  * this message is to configure VSI node or TC node bandwidth.
1392  */
1393 struct virtchnl_dcf_bw_cfg_list {
1394         u16 vf_id;
1395         u8 num_elem;
1396 #define VIRTCHNL_DCF_TARGET_TC_BW       0
1397 #define VIRTCHNL_DCF_TARGET_VF_BW       1
1398         u8 node_type;
1399         struct virtchnl_dcf_bw_cfg cfg[1];
1400 };
1401
1402 VIRTCHNL_CHECK_STRUCT_LEN(44, virtchnl_dcf_bw_cfg_list);
1403
1404 struct virtchnl_supported_rxdids {
1405         /* see enum virtchnl_rx_desc_id_bitmasks */
1406         u64 supported_rxdids;
1407 };
1408
1409 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_supported_rxdids);
1410
1411 /* VIRTCHNL_OP_EVENT
1412  * PF sends this message to inform the VF driver of events that may affect it.
1413  * No direct response is expected from the VF, though it may generate other
1414  * messages in response to this one.
1415  */
1416 enum virtchnl_event_codes {
1417         VIRTCHNL_EVENT_UNKNOWN = 0,
1418         VIRTCHNL_EVENT_LINK_CHANGE,
1419         VIRTCHNL_EVENT_RESET_IMPENDING,
1420         VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
1421         VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE,
1422 };
1423
1424 #define PF_EVENT_SEVERITY_INFO          0
1425 #define PF_EVENT_SEVERITY_ATTENTION     1
1426 #define PF_EVENT_SEVERITY_ACTION_REQUIRED       2
1427 #define PF_EVENT_SEVERITY_CERTAIN_DOOM  255
1428
1429 struct virtchnl_pf_event {
1430         /* see enum virtchnl_event_codes */
1431         s32 event;
1432         union {
1433                 /* If the PF driver does not support the new speed reporting
1434                  * capabilities then use link_event else use link_event_adv to
1435                  * get the speed and link information. The ability to understand
1436                  * new speeds is indicated by setting the capability flag
1437                  * VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter
1438                  * in virtchnl_vf_resource struct and can be used to determine
1439                  * which link event struct to use below.
1440                  */
1441                 struct {
1442                         enum virtchnl_link_speed link_speed;
1443                         u8 link_status;
1444                 } link_event;
1445                 struct {
1446                         /* link_speed provided in Mbps */
1447                         u32 link_speed;
1448                         u8 link_status;
1449                 } link_event_adv;
1450                 struct {
1451                         u16 vf_id;
1452                         u16 vsi_id;
1453                 } vf_vsi_map;
1454         } event_data;
1455
1456         int severity;
1457 };
1458
1459 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
1460
1461
1462 /* VF reset states - these are written into the RSTAT register:
1463  * VFGEN_RSTAT on the VF
1464  * When the PF initiates a reset, it writes 0
1465  * When the reset is complete, it writes 1
1466  * When the PF detects that the VF has recovered, it writes 2
1467  * VF checks this register periodically to determine if a reset has occurred,
1468  * then polls it to know when the reset is complete.
1469  * If either the PF or VF reads the register while the hardware
1470  * is in a reset state, it will return DEADBEEF, which, when masked
1471  * will result in 3.
1472  */
1473 enum virtchnl_vfr_states {
1474         VIRTCHNL_VFR_INPROGRESS = 0,
1475         VIRTCHNL_VFR_COMPLETED,
1476         VIRTCHNL_VFR_VFACTIVE,
1477 };
1478
1479 #define VIRTCHNL_MAX_NUM_PROTO_HDRS     32
1480 #define PROTO_HDR_SHIFT                 5
1481 #define PROTO_HDR_FIELD_START(proto_hdr_type) \
1482                                         (proto_hdr_type << PROTO_HDR_SHIFT)
1483 #define PROTO_HDR_FIELD_MASK ((1UL << PROTO_HDR_SHIFT) - 1)
1484
1485 /* VF use these macros to configure each protocol header.
1486  * Specify which protocol headers and protocol header fields base on
1487  * virtchnl_proto_hdr_type and virtchnl_proto_hdr_field.
1488  * @param hdr: a struct of virtchnl_proto_hdr
1489  * @param hdr_type: ETH/IPV4/TCP, etc
1490  * @param field: SRC/DST/TEID/SPI, etc
1491  */
1492 #define VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, field) \
1493         ((hdr)->field_selector |= BIT((field) & PROTO_HDR_FIELD_MASK))
1494 #define VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, field) \
1495         ((hdr)->field_selector &= ~BIT((field) & PROTO_HDR_FIELD_MASK))
1496 #define VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val) \
1497         ((hdr)->field_selector & BIT((val) & PROTO_HDR_FIELD_MASK))
1498 #define VIRTCHNL_GET_PROTO_HDR_FIELD(hdr)       ((hdr)->field_selector)
1499
1500 #define VIRTCHNL_ADD_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \
1501         (VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, \
1502                 VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
1503 #define VIRTCHNL_DEL_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \
1504         (VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, \
1505                 VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
1506
1507 #define VIRTCHNL_SET_PROTO_HDR_TYPE(hdr, hdr_type) \
1508         ((hdr)->type = VIRTCHNL_PROTO_HDR_ ## hdr_type)
1509 #define VIRTCHNL_GET_PROTO_HDR_TYPE(hdr) \
1510         (((hdr)->type) >> PROTO_HDR_SHIFT)
1511 #define VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) \
1512         ((hdr)->type == ((val) >> PROTO_HDR_SHIFT))
1513 #define VIRTCHNL_TEST_PROTO_HDR(hdr, val) \
1514         (VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) && \
1515          VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val))
1516
1517 /* Protocol header type within a packet segment. A segment consists of one or
1518  * more protocol headers that make up a logical group of protocol headers. Each
1519  * logical group of protocol headers encapsulates or is encapsulated using/by
1520  * tunneling or encapsulation protocols for network virtualization.
1521  */
1522 enum virtchnl_proto_hdr_type {
1523         VIRTCHNL_PROTO_HDR_NONE,
1524         VIRTCHNL_PROTO_HDR_ETH,
1525         VIRTCHNL_PROTO_HDR_S_VLAN,
1526         VIRTCHNL_PROTO_HDR_C_VLAN,
1527         VIRTCHNL_PROTO_HDR_IPV4,
1528         VIRTCHNL_PROTO_HDR_IPV6,
1529         VIRTCHNL_PROTO_HDR_TCP,
1530         VIRTCHNL_PROTO_HDR_UDP,
1531         VIRTCHNL_PROTO_HDR_SCTP,
1532         VIRTCHNL_PROTO_HDR_GTPU_IP,
1533         VIRTCHNL_PROTO_HDR_GTPU_EH,
1534         VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN,
1535         VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP,
1536         VIRTCHNL_PROTO_HDR_PPPOE,
1537         VIRTCHNL_PROTO_HDR_L2TPV3,
1538         VIRTCHNL_PROTO_HDR_ESP,
1539         VIRTCHNL_PROTO_HDR_AH,
1540         VIRTCHNL_PROTO_HDR_PFCP,
1541         VIRTCHNL_PROTO_HDR_GTPC,
1542         VIRTCHNL_PROTO_HDR_ECPRI,
1543         VIRTCHNL_PROTO_HDR_L2TPV2,
1544         VIRTCHNL_PROTO_HDR_PPP,
1545         /* IPv4 and IPv6 Fragment header types are only associated to
1546          * VIRTCHNL_PROTO_HDR_IPV4 and VIRTCHNL_PROTO_HDR_IPV6 respectively,
1547          * cannot be used independently.
1548          */
1549         VIRTCHNL_PROTO_HDR_IPV4_FRAG,
1550         VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG,
1551         VIRTCHNL_PROTO_HDR_GRE,
1552 };
1553
1554 /* Protocol header field within a protocol header. */
1555 enum virtchnl_proto_hdr_field {
1556         /* ETHER */
1557         VIRTCHNL_PROTO_HDR_ETH_SRC =
1558                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ETH),
1559         VIRTCHNL_PROTO_HDR_ETH_DST,
1560         VIRTCHNL_PROTO_HDR_ETH_ETHERTYPE,
1561         /* S-VLAN */
1562         VIRTCHNL_PROTO_HDR_S_VLAN_ID =
1563                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_S_VLAN),
1564         /* C-VLAN */
1565         VIRTCHNL_PROTO_HDR_C_VLAN_ID =
1566                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_C_VLAN),
1567         /* IPV4 */
1568         VIRTCHNL_PROTO_HDR_IPV4_SRC =
1569                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4),
1570         VIRTCHNL_PROTO_HDR_IPV4_DST,
1571         VIRTCHNL_PROTO_HDR_IPV4_DSCP,
1572         VIRTCHNL_PROTO_HDR_IPV4_TTL,
1573         VIRTCHNL_PROTO_HDR_IPV4_PROT,
1574         /* IPV6 */
1575         VIRTCHNL_PROTO_HDR_IPV6_SRC =
1576                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6),
1577         VIRTCHNL_PROTO_HDR_IPV6_DST,
1578         VIRTCHNL_PROTO_HDR_IPV6_TC,
1579         VIRTCHNL_PROTO_HDR_IPV6_HOP_LIMIT,
1580         VIRTCHNL_PROTO_HDR_IPV6_PROT,
1581         /* IPV6 Prefix */
1582         VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_SRC,
1583         VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_DST,
1584         VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_SRC,
1585         VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_DST,
1586         VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_SRC,
1587         VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_DST,
1588         VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_SRC,
1589         VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_DST,
1590         VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_SRC,
1591         VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_DST,
1592         VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_SRC,
1593         VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_DST,
1594         /* TCP */
1595         VIRTCHNL_PROTO_HDR_TCP_SRC_PORT =
1596                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_TCP),
1597         VIRTCHNL_PROTO_HDR_TCP_DST_PORT,
1598         VIRTCHNL_PROTO_HDR_TCP_CHKSUM,
1599         /* UDP */
1600         VIRTCHNL_PROTO_HDR_UDP_SRC_PORT =
1601                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_UDP),
1602         VIRTCHNL_PROTO_HDR_UDP_DST_PORT,
1603         VIRTCHNL_PROTO_HDR_UDP_CHKSUM,
1604         /* SCTP */
1605         VIRTCHNL_PROTO_HDR_SCTP_SRC_PORT =
1606                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_SCTP),
1607         VIRTCHNL_PROTO_HDR_SCTP_DST_PORT,
1608         VIRTCHNL_PROTO_HDR_SCTP_CHKSUM,
1609         /* GTPU_IP */
1610         VIRTCHNL_PROTO_HDR_GTPU_IP_TEID =
1611                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_IP),
1612         /* GTPU_EH */
1613         VIRTCHNL_PROTO_HDR_GTPU_EH_PDU =
1614                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH),
1615         VIRTCHNL_PROTO_HDR_GTPU_EH_QFI,
1616         /* PPPOE */
1617         VIRTCHNL_PROTO_HDR_PPPOE_SESS_ID =
1618                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PPPOE),
1619         /* L2TPV3 */
1620         VIRTCHNL_PROTO_HDR_L2TPV3_SESS_ID =
1621                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV3),
1622         /* ESP */
1623         VIRTCHNL_PROTO_HDR_ESP_SPI =
1624                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ESP),
1625         /* AH */
1626         VIRTCHNL_PROTO_HDR_AH_SPI =
1627                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_AH),
1628         /* PFCP */
1629         VIRTCHNL_PROTO_HDR_PFCP_S_FIELD =
1630                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PFCP),
1631         VIRTCHNL_PROTO_HDR_PFCP_SEID,
1632         /* GTPC */
1633         VIRTCHNL_PROTO_HDR_GTPC_TEID =
1634                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPC),
1635         /* ECPRI */
1636         VIRTCHNL_PROTO_HDR_ECPRI_MSG_TYPE =
1637                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ECPRI),
1638         VIRTCHNL_PROTO_HDR_ECPRI_PC_RTC_ID,
1639         /* IPv4 Dummy Fragment */
1640         VIRTCHNL_PROTO_HDR_IPV4_FRAG_PKID =
1641                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4_FRAG),
1642         /* IPv6 Extension Fragment */
1643         VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG_PKID =
1644                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG),
1645         /* GTPU_DWN/UP */
1646         VIRTCHNL_PROTO_HDR_GTPU_DWN_QFI =
1647                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN),
1648         VIRTCHNL_PROTO_HDR_GTPU_UP_QFI =
1649                 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP),
1650 };
1651
1652 struct virtchnl_proto_hdr {
1653         /* see enum virtchnl_proto_hdr_type */
1654         s32 type;
1655         u32 field_selector; /* a bit mask to select field for header type */
1656         u8 buffer[64];
1657         /**
1658          * binary buffer in network order for specific header type.
1659          * For example, if type = VIRTCHNL_PROTO_HDR_IPV4, a IPv4
1660          * header is expected to be copied into the buffer.
1661          */
1662 };
1663
1664 VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr);
1665
1666 struct virtchnl_proto_hdrs {
1667         u8 tunnel_level;
1668         /**
1669          * specify where protocol header start from.
1670          * 0 - from the outer layer
1671          * 1 - from the first inner layer
1672          * 2 - from the second inner layer
1673          * ....
1674          **/
1675         int count; /* the proto layers must < VIRTCHNL_MAX_NUM_PROTO_HDRS */
1676         struct virtchnl_proto_hdr proto_hdr[VIRTCHNL_MAX_NUM_PROTO_HDRS];
1677 };
1678
1679 VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
1680
1681 struct virtchnl_rss_cfg {
1682         struct virtchnl_proto_hdrs proto_hdrs;     /* protocol headers */
1683
1684         /* see enum virtchnl_rss_algorithm; rss algorithm type */
1685         s32 rss_algorithm;
1686         u8 reserved[128];                          /* reserve for future */
1687 };
1688
1689 VIRTCHNL_CHECK_STRUCT_LEN(2444, virtchnl_rss_cfg);
1690
1691 /* action configuration for FDIR */
1692 struct virtchnl_filter_action {
1693         /* see enum virtchnl_action type */
1694         s32 type;
1695         union {
1696                 /* used for queue and qgroup action */
1697                 struct {
1698                         u16 index;
1699                         u8 region;
1700                 } queue;
1701                 /* used for count action */
1702                 struct {
1703                         /* share counter ID with other flow rules */
1704                         u8 shared;
1705                         u32 id; /* counter ID */
1706                 } count;
1707                 /* used for mark action */
1708                 u32 mark_id;
1709                 u8 reserve[32];
1710         } act_conf;
1711 };
1712
1713 VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_filter_action);
1714
1715 #define VIRTCHNL_MAX_NUM_ACTIONS  8
1716
1717 struct virtchnl_filter_action_set {
1718         /* action number must be less then VIRTCHNL_MAX_NUM_ACTIONS */
1719         int count;
1720         struct virtchnl_filter_action actions[VIRTCHNL_MAX_NUM_ACTIONS];
1721 };
1722
1723 VIRTCHNL_CHECK_STRUCT_LEN(292, virtchnl_filter_action_set);
1724
1725 /* pattern and action for FDIR rule */
1726 struct virtchnl_fdir_rule {
1727         struct virtchnl_proto_hdrs proto_hdrs;
1728         struct virtchnl_filter_action_set action_set;
1729 };
1730
1731 VIRTCHNL_CHECK_STRUCT_LEN(2604, virtchnl_fdir_rule);
1732
1733 /* Status returned to VF after VF requests FDIR commands
1734  * VIRTCHNL_FDIR_SUCCESS
1735  * VF FDIR related request is successfully done by PF
1736  * The request can be OP_ADD/DEL/QUERY_FDIR_FILTER.
1737  *
1738  * VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE
1739  * OP_ADD_FDIR_FILTER request is failed due to no Hardware resource.
1740  *
1741  * VIRTCHNL_FDIR_FAILURE_RULE_EXIST
1742  * OP_ADD_FDIR_FILTER request is failed due to the rule is already existed.
1743  *
1744  * VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT
1745  * OP_ADD_FDIR_FILTER request is failed due to conflict with existing rule.
1746  *
1747  * VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST
1748  * OP_DEL_FDIR_FILTER request is failed due to this rule doesn't exist.
1749  *
1750  * VIRTCHNL_FDIR_FAILURE_RULE_INVALID
1751  * OP_ADD_FDIR_FILTER request is failed due to parameters validation
1752  * or HW doesn't support.
1753  *
1754  * VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT
1755  * OP_ADD/DEL_FDIR_FILTER request is failed due to timing out
1756  * for programming.
1757  *
1758  * VIRTCHNL_FDIR_FAILURE_QUERY_INVALID
1759  * OP_QUERY_FDIR_FILTER request is failed due to parameters validation,
1760  * for example, VF query counter of a rule who has no counter action.
1761  */
1762 enum virtchnl_fdir_prgm_status {
1763         VIRTCHNL_FDIR_SUCCESS = 0,
1764         VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE,
1765         VIRTCHNL_FDIR_FAILURE_RULE_EXIST,
1766         VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT,
1767         VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST,
1768         VIRTCHNL_FDIR_FAILURE_RULE_INVALID,
1769         VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT,
1770         VIRTCHNL_FDIR_FAILURE_QUERY_INVALID,
1771 };
1772
1773 /* VIRTCHNL_OP_ADD_FDIR_FILTER
1774  * VF sends this request to PF by filling out vsi_id,
1775  * validate_only and rule_cfg. PF will return flow_id
1776  * if the request is successfully done and return add_status to VF.
1777  */
1778 struct virtchnl_fdir_add {
1779         u16 vsi_id;  /* INPUT */
1780         /*
1781          * 1 for validating a fdir rule, 0 for creating a fdir rule.
1782          * Validate and create share one ops: VIRTCHNL_OP_ADD_FDIR_FILTER.
1783          */
1784         u16 validate_only; /* INPUT */
1785         u32 flow_id;       /* OUTPUT */
1786         struct virtchnl_fdir_rule rule_cfg; /* INPUT */
1787
1788         /* see enum virtchnl_fdir_prgm_status; OUTPUT */
1789         s32 status;
1790 };
1791
1792 VIRTCHNL_CHECK_STRUCT_LEN(2616, virtchnl_fdir_add);
1793
1794 /* VIRTCHNL_OP_DEL_FDIR_FILTER
1795  * VF sends this request to PF by filling out vsi_id
1796  * and flow_id. PF will return del_status to VF.
1797  */
1798 struct virtchnl_fdir_del {
1799         u16 vsi_id;  /* INPUT */
1800         u16 pad;
1801         u32 flow_id; /* INPUT */
1802
1803         /* see enum virtchnl_fdir_prgm_status; OUTPUT */
1804         s32 status;
1805 };
1806
1807 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_fdir_del);
1808
1809 /* VIRTCHNL_OP_GET_QOS_CAPS
1810  * VF sends this message to get its QoS Caps, such as
1811  * TC number, Arbiter and Bandwidth.
1812  */
1813 struct virtchnl_qos_cap_elem {
1814         u8 tc_num;
1815         u8 tc_prio;
1816 #define VIRTCHNL_ABITER_STRICT      0
1817 #define VIRTCHNL_ABITER_ETS         2
1818         u8 arbiter;
1819 #define VIRTCHNL_STRICT_WEIGHT      1
1820         u8 weight;
1821         enum virtchnl_bw_limit_type type;
1822         union {
1823                 struct virtchnl_shaper_bw shaper;
1824                 u8 pad2[32];
1825         };
1826 };
1827
1828 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_qos_cap_elem);
1829
1830 struct virtchnl_qos_cap_list {
1831         u16 vsi_id;
1832         u16 num_elem;
1833         struct virtchnl_qos_cap_elem cap[1];
1834 };
1835
1836 VIRTCHNL_CHECK_STRUCT_LEN(44, virtchnl_qos_cap_list);
1837
1838 /* VIRTCHNL_OP_CONFIG_QUEUE_TC_MAP
1839  * VF sends message virtchnl_queue_tc_mapping to set queue to tc
1840  * mapping for all the Tx and Rx queues with a specified VSI, and
1841  * would get response about bitmap of valid user priorities
1842  * associated with queues.
1843  */
1844 struct virtchnl_queue_tc_mapping {
1845         u16 vsi_id;
1846         u16 num_tc;
1847         u16 num_queue_pairs;
1848         u8 pad[2];
1849         union {
1850                 struct {
1851                         u16 start_queue_id;
1852                         u16 queue_count;
1853                 } req;
1854                 struct {
1855 #define VIRTCHNL_USER_PRIO_TYPE_UP      0
1856 #define VIRTCHNL_USER_PRIO_TYPE_DSCP    1
1857                         u16 prio_type;
1858                         u16 valid_prio_bitmap;
1859                 } resp;
1860         } tc[1];
1861 };
1862
1863 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_tc_mapping);
1864
1865
1866 /* TX and RX queue types are valid in legacy as well as split queue models.
1867  * With Split Queue model, 2 additional types are introduced - TX_COMPLETION
1868  * and RX_BUFFER. In split queue model, RX corresponds to the queue where HW
1869  * posts completions.
1870  */
1871 enum virtchnl_queue_type {
1872         VIRTCHNL_QUEUE_TYPE_TX                  = 0,
1873         VIRTCHNL_QUEUE_TYPE_RX                  = 1,
1874         VIRTCHNL_QUEUE_TYPE_TX_COMPLETION       = 2,
1875         VIRTCHNL_QUEUE_TYPE_RX_BUFFER           = 3,
1876         VIRTCHNL_QUEUE_TYPE_CONFIG_TX           = 4,
1877         VIRTCHNL_QUEUE_TYPE_CONFIG_RX           = 5
1878 };
1879
1880
1881 /* structure to specify a chunk of contiguous queues */
1882 struct virtchnl_queue_chunk {
1883         /* see enum virtchnl_queue_type */
1884         s32 type;
1885         u16 start_queue_id;
1886         u16 num_queues;
1887 };
1888
1889 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_queue_chunk);
1890
1891 /* structure to specify several chunks of contiguous queues */
1892 struct virtchnl_queue_chunks {
1893         u16 num_chunks;
1894         u16 rsvd;
1895         struct virtchnl_queue_chunk chunks[1];
1896 };
1897
1898 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_chunks);
1899
1900
1901 /* VIRTCHNL_OP_ENABLE_QUEUES_V2
1902  * VIRTCHNL_OP_DISABLE_QUEUES_V2
1903  * VIRTCHNL_OP_DEL_QUEUES
1904  *
1905  * If VIRTCHNL_CAP_EXT_FEATURES was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
1906  * then all of these ops are available.
1907  *
1908  * If VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
1909  * then VIRTCHNL_OP_ENABLE_QUEUES_V2 and VIRTCHNL_OP_DISABLE_QUEUES_V2 are
1910  * available.
1911  *
1912  * PF sends these messages to enable, disable or delete queues specified in
1913  * chunks. PF sends virtchnl_del_ena_dis_queues struct to specify the queues
1914  * to be enabled/disabled/deleted. Also applicable to single queue RX or
1915  * TX. CP performs requested action and returns status.
1916  */
1917 struct virtchnl_del_ena_dis_queues {
1918         u16 vport_id;
1919         u16 pad;
1920         struct virtchnl_queue_chunks chunks;
1921 };
1922
1923 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_del_ena_dis_queues);
1924
1925 /* Virtchannel interrupt throttling rate index */
1926 enum virtchnl_itr_idx {
1927         VIRTCHNL_ITR_IDX_0      = 0,
1928         VIRTCHNL_ITR_IDX_1      = 1,
1929         VIRTCHNL_ITR_IDX_NO_ITR = 3,
1930 };
1931
1932 /* Queue to vector mapping */
1933 struct virtchnl_queue_vector {
1934         u16 queue_id;
1935         u16 vector_id;
1936         u8 pad[4];
1937
1938         /* see enum virtchnl_itr_idx */
1939         s32 itr_idx;
1940
1941         /* see enum virtchnl_queue_type */
1942         s32 queue_type;
1943 };
1944
1945 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_queue_vector);
1946
1947 /* VIRTCHNL_OP_MAP_QUEUE_VECTOR
1948  * VIRTCHNL_OP_UNMAP_QUEUE_VECTOR
1949  *
1950  * If VIRTCHNL_CAP_EXT_FEATURES was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
1951  * then all of these ops are available.
1952  *
1953  * If VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
1954  * then only VIRTCHNL_OP_MAP_QUEUE_VECTOR is available.
1955  *
1956  * PF sends this message to map or unmap queues to vectors and ITR index
1957  * registers. External data buffer contains virtchnl_queue_vector_maps structure
1958  * that contains num_qv_maps of virtchnl_queue_vector structures.
1959  * CP maps the requested queue vector maps after validating the queue and vector
1960  * ids and returns a status code.
1961  */
1962 struct virtchnl_queue_vector_maps {
1963         u16 vport_id;
1964         u16 num_qv_maps;
1965         u8 pad[4];
1966         struct virtchnl_queue_vector qv_maps[1];
1967 };
1968
1969 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_queue_vector_maps);
1970
1971
1972 /* Since VF messages are limited by u16 size, precalculate the maximum possible
1973  * values of nested elements in virtchnl structures that virtual channel can
1974  * possibly handle in a single message.
1975  */
1976 enum virtchnl_vector_limits {
1977         VIRTCHNL_OP_CONFIG_VSI_QUEUES_MAX       =
1978                 ((u16)(~0) - sizeof(struct virtchnl_vsi_queue_config_info)) /
1979                 sizeof(struct virtchnl_queue_pair_info),
1980
1981         VIRTCHNL_OP_CONFIG_IRQ_MAP_MAX          =
1982                 ((u16)(~0) - sizeof(struct virtchnl_irq_map_info)) /
1983                 sizeof(struct virtchnl_vector_map),
1984
1985         VIRTCHNL_OP_ADD_DEL_ETH_ADDR_MAX        =
1986                 ((u16)(~0) - sizeof(struct virtchnl_ether_addr_list)) /
1987                 sizeof(struct virtchnl_ether_addr),
1988
1989         VIRTCHNL_OP_ADD_DEL_VLAN_MAX            =
1990                 ((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list)) /
1991                 sizeof(u16),
1992
1993
1994         VIRTCHNL_OP_ENABLE_CHANNELS_MAX         =
1995                 ((u16)(~0) - sizeof(struct virtchnl_tc_info)) /
1996                 sizeof(struct virtchnl_channel_info),
1997
1998         VIRTCHNL_OP_ENABLE_DISABLE_DEL_QUEUES_V2_MAX    =
1999                 ((u16)(~0) - sizeof(struct virtchnl_del_ena_dis_queues)) /
2000                 sizeof(struct virtchnl_queue_chunk),
2001
2002         VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX  =
2003                 ((u16)(~0) - sizeof(struct virtchnl_queue_vector_maps)) /
2004                 sizeof(struct virtchnl_queue_vector),
2005
2006         VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX         =
2007                 ((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list_v2)) /
2008                 sizeof(struct virtchnl_vlan_filter),
2009 };
2010
2011 /**
2012  * virtchnl_vc_validate_vf_msg
2013  * @ver: Virtchnl version info
2014  * @v_opcode: Opcode for the message
2015  * @msg: pointer to the msg buffer
2016  * @msglen: msg length
2017  *
2018  * validate msg format against struct for each opcode
2019  */
2020 static inline int
2021 virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
2022                             u8 *msg, u16 msglen)
2023 {
2024         bool err_msg_format = false;
2025         u32 valid_len = 0;
2026
2027         /* Validate message length. */
2028         switch (v_opcode) {
2029         case VIRTCHNL_OP_VERSION:
2030                 valid_len = sizeof(struct virtchnl_version_info);
2031                 break;
2032         case VIRTCHNL_OP_RESET_VF:
2033                 break;
2034         case VIRTCHNL_OP_GET_VF_RESOURCES:
2035                 if (VF_IS_V11(ver))
2036                         valid_len = sizeof(u32);
2037                 break;
2038         case VIRTCHNL_OP_CONFIG_TX_QUEUE:
2039                 valid_len = sizeof(struct virtchnl_txq_info);
2040                 break;
2041         case VIRTCHNL_OP_CONFIG_RX_QUEUE:
2042                 valid_len = sizeof(struct virtchnl_rxq_info);
2043                 break;
2044         case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
2045                 valid_len = sizeof(struct virtchnl_vsi_queue_config_info);
2046                 if (msglen >= valid_len) {
2047                         struct virtchnl_vsi_queue_config_info *vqc =
2048                             (struct virtchnl_vsi_queue_config_info *)msg;
2049
2050                         if (vqc->num_queue_pairs == 0 || vqc->num_queue_pairs >
2051                             VIRTCHNL_OP_CONFIG_VSI_QUEUES_MAX) {
2052                                 err_msg_format = true;
2053                                 break;
2054                         }
2055
2056                         valid_len += (vqc->num_queue_pairs *
2057                                       sizeof(struct
2058                                              virtchnl_queue_pair_info));
2059                 }
2060                 break;
2061         case VIRTCHNL_OP_CONFIG_IRQ_MAP:
2062                 valid_len = sizeof(struct virtchnl_irq_map_info);
2063                 if (msglen >= valid_len) {
2064                         struct virtchnl_irq_map_info *vimi =
2065                             (struct virtchnl_irq_map_info *)msg;
2066
2067                         if (vimi->num_vectors == 0 || vimi->num_vectors >
2068                             VIRTCHNL_OP_CONFIG_IRQ_MAP_MAX) {
2069                                 err_msg_format = true;
2070                                 break;
2071                         }
2072
2073                         valid_len += (vimi->num_vectors *
2074                                       sizeof(struct virtchnl_vector_map));
2075                 }
2076                 break;
2077         case VIRTCHNL_OP_ENABLE_QUEUES:
2078         case VIRTCHNL_OP_DISABLE_QUEUES:
2079                 valid_len = sizeof(struct virtchnl_queue_select);
2080                 break;
2081         case VIRTCHNL_OP_GET_MAX_RSS_QREGION:
2082                 break;
2083         case VIRTCHNL_OP_ADD_ETH_ADDR:
2084         case VIRTCHNL_OP_DEL_ETH_ADDR:
2085                 valid_len = sizeof(struct virtchnl_ether_addr_list);
2086                 if (msglen >= valid_len) {
2087                         struct virtchnl_ether_addr_list *veal =
2088                             (struct virtchnl_ether_addr_list *)msg;
2089
2090                         if (veal->num_elements == 0 || veal->num_elements >
2091                             VIRTCHNL_OP_ADD_DEL_ETH_ADDR_MAX) {
2092                                 err_msg_format = true;
2093                                 break;
2094                         }
2095
2096                         valid_len += veal->num_elements *
2097                             sizeof(struct virtchnl_ether_addr);
2098                 }
2099                 break;
2100         case VIRTCHNL_OP_ADD_VLAN:
2101         case VIRTCHNL_OP_DEL_VLAN:
2102                 valid_len = sizeof(struct virtchnl_vlan_filter_list);
2103                 if (msglen >= valid_len) {
2104                         struct virtchnl_vlan_filter_list *vfl =
2105                             (struct virtchnl_vlan_filter_list *)msg;
2106
2107                         if (vfl->num_elements == 0 || vfl->num_elements >
2108                             VIRTCHNL_OP_ADD_DEL_VLAN_MAX) {
2109                                 err_msg_format = true;
2110                                 break;
2111                         }
2112
2113                         valid_len += vfl->num_elements * sizeof(u16);
2114                 }
2115                 break;
2116         case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
2117                 valid_len = sizeof(struct virtchnl_promisc_info);
2118                 break;
2119         case VIRTCHNL_OP_GET_STATS:
2120                 valid_len = sizeof(struct virtchnl_queue_select);
2121                 break;
2122         case VIRTCHNL_OP_CONFIG_RSS_KEY:
2123                 valid_len = sizeof(struct virtchnl_rss_key);
2124                 if (msglen >= valid_len) {
2125                         struct virtchnl_rss_key *vrk =
2126                                 (struct virtchnl_rss_key *)msg;
2127
2128                         if (vrk->key_len == 0) {
2129                                 /* zero length is allowed as input */
2130                                 break;
2131                         }
2132
2133                         valid_len += vrk->key_len - 1;
2134                 }
2135                 break;
2136         case VIRTCHNL_OP_CONFIG_RSS_LUT:
2137                 valid_len = sizeof(struct virtchnl_rss_lut);
2138                 if (msglen >= valid_len) {
2139                         struct virtchnl_rss_lut *vrl =
2140                                 (struct virtchnl_rss_lut *)msg;
2141
2142                         if (vrl->lut_entries == 0) {
2143                                 /* zero entries is allowed as input */
2144                                 break;
2145                         }
2146
2147                         valid_len += vrl->lut_entries - 1;
2148                 }
2149                 break;
2150         case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
2151                 break;
2152         case VIRTCHNL_OP_SET_RSS_HENA:
2153                 valid_len = sizeof(struct virtchnl_rss_hena);
2154                 break;
2155         case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
2156         case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
2157                 break;
2158         case VIRTCHNL_OP_REQUEST_QUEUES:
2159                 valid_len = sizeof(struct virtchnl_vf_res_request);
2160                 break;
2161         case VIRTCHNL_OP_ENABLE_CHANNELS:
2162                 valid_len = sizeof(struct virtchnl_tc_info);
2163                 if (msglen >= valid_len) {
2164                         struct virtchnl_tc_info *vti =
2165                                 (struct virtchnl_tc_info *)msg;
2166
2167                         if (vti->num_tc == 0 || vti->num_tc >
2168                             VIRTCHNL_OP_ENABLE_CHANNELS_MAX) {
2169                                 err_msg_format = true;
2170                                 break;
2171                         }
2172
2173                         valid_len += (vti->num_tc - 1) *
2174                                      sizeof(struct virtchnl_channel_info);
2175                 }
2176                 break;
2177         case VIRTCHNL_OP_DISABLE_CHANNELS:
2178                 break;
2179         case VIRTCHNL_OP_ADD_CLOUD_FILTER:
2180         case VIRTCHNL_OP_DEL_CLOUD_FILTER:
2181                 valid_len = sizeof(struct virtchnl_filter);
2182                 break;
2183         case VIRTCHNL_OP_DCF_VLAN_OFFLOAD:
2184                 valid_len = sizeof(struct virtchnl_dcf_vlan_offload);
2185                 break;
2186         case VIRTCHNL_OP_DCF_CMD_DESC:
2187         case VIRTCHNL_OP_DCF_CMD_BUFF:
2188                 /* These two opcodes are specific to handle the AdminQ command,
2189                  * so the validation needs to be done in PF's context.
2190                  */
2191                 valid_len = msglen;
2192                 break;
2193         case VIRTCHNL_OP_DCF_DISABLE:
2194         case VIRTCHNL_OP_DCF_GET_VSI_MAP:
2195         case VIRTCHNL_OP_DCF_GET_PKG_INFO:
2196                 break;
2197         case VIRTCHNL_OP_DCF_CONFIG_BW:
2198                 valid_len = sizeof(struct virtchnl_dcf_bw_cfg_list);
2199                 if (msglen >= valid_len) {
2200                         struct virtchnl_dcf_bw_cfg_list *cfg_list =
2201                                 (struct virtchnl_dcf_bw_cfg_list *)msg;
2202                         if (cfg_list->num_elem == 0) {
2203                                 err_msg_format = true;
2204                                 break;
2205                         }
2206                         valid_len += (cfg_list->num_elem - 1) *
2207                                          sizeof(struct virtchnl_dcf_bw_cfg);
2208                 }
2209                 break;
2210         case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
2211                 break;
2212         case VIRTCHNL_OP_ADD_RSS_CFG:
2213         case VIRTCHNL_OP_DEL_RSS_CFG:
2214                 valid_len = sizeof(struct virtchnl_rss_cfg);
2215                 break;
2216         case VIRTCHNL_OP_ADD_FDIR_FILTER:
2217                 valid_len = sizeof(struct virtchnl_fdir_add);
2218                 break;
2219         case VIRTCHNL_OP_DEL_FDIR_FILTER:
2220                 valid_len = sizeof(struct virtchnl_fdir_del);
2221                 break;
2222         case VIRTCHNL_OP_GET_QOS_CAPS:
2223                 break;
2224         case VIRTCHNL_OP_CONFIG_QUEUE_TC_MAP:
2225                 valid_len = sizeof(struct virtchnl_queue_tc_mapping);
2226                 if (msglen >= valid_len) {
2227                         struct virtchnl_queue_tc_mapping *q_tc =
2228                                 (struct virtchnl_queue_tc_mapping *)msg;
2229                         if (q_tc->num_tc == 0) {
2230                                 err_msg_format = true;
2231                                 break;
2232                         }
2233                         valid_len += (q_tc->num_tc - 1) *
2234                                          sizeof(q_tc->tc[0]);
2235                 }
2236                 break;
2237         case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
2238                 break;
2239         case VIRTCHNL_OP_ADD_VLAN_V2:
2240         case VIRTCHNL_OP_DEL_VLAN_V2:
2241                 valid_len = sizeof(struct virtchnl_vlan_filter_list_v2);
2242                 if (msglen >= valid_len) {
2243                         struct virtchnl_vlan_filter_list_v2 *vfl =
2244                             (struct virtchnl_vlan_filter_list_v2 *)msg;
2245
2246                         if (vfl->num_elements == 0 || vfl->num_elements >
2247                             VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX) {
2248                                 err_msg_format = true;
2249                                 break;
2250                         }
2251
2252                         valid_len += (vfl->num_elements - 1) *
2253                                 sizeof(struct virtchnl_vlan_filter);
2254                 }
2255                 break;
2256         case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
2257         case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
2258         case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
2259         case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
2260         case VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2:
2261         case VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2:
2262                 valid_len = sizeof(struct virtchnl_vlan_setting);
2263                 break;
2264         case VIRTCHNL_OP_ENABLE_QUEUES_V2:
2265         case VIRTCHNL_OP_DISABLE_QUEUES_V2:
2266                 valid_len = sizeof(struct virtchnl_del_ena_dis_queues);
2267                 if (msglen >= valid_len) {
2268                         struct virtchnl_del_ena_dis_queues *qs =
2269                                 (struct virtchnl_del_ena_dis_queues *)msg;
2270                         if (qs->chunks.num_chunks == 0 ||
2271                             qs->chunks.num_chunks > VIRTCHNL_OP_ENABLE_DISABLE_DEL_QUEUES_V2_MAX) {
2272                                 err_msg_format = true;
2273                                 break;
2274                         }
2275                         valid_len += (qs->chunks.num_chunks - 1) *
2276                                       sizeof(struct virtchnl_queue_chunk);
2277                 }
2278                 break;
2279         case VIRTCHNL_OP_MAP_QUEUE_VECTOR:
2280                 valid_len = sizeof(struct virtchnl_queue_vector_maps);
2281                 if (msglen >= valid_len) {
2282                         struct virtchnl_queue_vector_maps *v_qp =
2283                                 (struct virtchnl_queue_vector_maps *)msg;
2284                         if (v_qp->num_qv_maps == 0 ||
2285                             v_qp->num_qv_maps > VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX) {
2286                                 err_msg_format = true;
2287                                 break;
2288                         }
2289                         valid_len += (v_qp->num_qv_maps - 1) *
2290                                       sizeof(struct virtchnl_queue_vector);
2291                 }
2292                 break;
2293         /* These are always errors coming from the VF. */
2294         case VIRTCHNL_OP_EVENT:
2295         case VIRTCHNL_OP_UNKNOWN:
2296         default:
2297                 return VIRTCHNL_STATUS_ERR_PARAM;
2298         }
2299         /* few more checks */
2300         if (err_msg_format || valid_len != msglen)
2301                 return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH;
2302
2303         return 0;
2304 }
2305 #endif /* _VIRTCHNL_H_ */