1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2001-2021 Intel Corporation
9 * This header file describes the Virtual Function (VF) - Physical Function
10 * (PF) communication protocol used by the drivers for all devices starting
11 * from our 40G product line
13 * Admin queue buffer usage:
14 * desc->opcode is always aqc_opc_send_msg_to_pf
15 * flags, retval, datalen, and data addr are all used normally.
16 * The Firmware copies the cookie fields when sending messages between the
17 * PF and VF, but uses all other fields internally. Due to this limitation,
18 * we must send all messages as "indirect", i.e. using an external buffer.
20 * All the VSI indexes are relative to the VF. Each VF can have maximum of
21 * three VSIs. All the queue indexes are relative to the VSI. Each VF can
22 * have a maximum of sixteen queues for all of its VSIs.
24 * The PF is required to return a status code in v_retval for all messages
25 * except RESET_VF, which does not require any response. The returned value
26 * is of virtchnl_status_code type, defined in the shared type.h.
28 * In general, VF driver initialization should roughly follow the order of
29 * these opcodes. The VF driver must first validate the API version of the
30 * PF driver, then request a reset, then get resources, then configure
31 * queues and interrupts. After these operations are complete, the VF
32 * driver may start its queues, optionally add MAC and VLAN filters, and
36 /* START GENERIC DEFINES
37 * Need to ensure the following enums and defines hold the same meaning and
38 * value in current and future projects
41 #include "virtchnl_inline_ipsec.h"
44 enum virtchnl_status_code {
45 VIRTCHNL_STATUS_SUCCESS = 0,
46 VIRTCHNL_STATUS_ERR_PARAM = -5,
47 VIRTCHNL_STATUS_ERR_NO_MEMORY = -18,
48 VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38,
49 VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39,
50 VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40,
51 VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR = -53,
52 VIRTCHNL_STATUS_ERR_NOT_SUPPORTED = -64,
55 /* Backward compatibility */
56 #define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM
57 #define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED
59 #define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0
60 #define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1
61 #define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
62 #define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3
63 #define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4
64 #define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5
65 #define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6
66 #define VIRTCHNL_LINK_SPEED_5GB_SHIFT 0x7
68 enum virtchnl_link_speed {
69 VIRTCHNL_LINK_SPEED_UNKNOWN = 0,
70 VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT),
71 VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT),
72 VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT),
73 VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
74 VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
75 VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
76 VIRTCHNL_LINK_SPEED_2_5GB = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT),
77 VIRTCHNL_LINK_SPEED_5GB = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT),
80 /* for hsplit_0 field of Rx HMC context */
81 /* deprecated with IAVF 1.0 */
82 enum virtchnl_rx_hsplit {
83 VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0,
84 VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1,
85 VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2,
86 VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4,
87 VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8,
90 enum virtchnl_bw_limit_type {
91 VIRTCHNL_BW_SHAPER = 0,
94 #define VIRTCHNL_ETH_LENGTH_OF_ADDRESS 6
95 /* END GENERIC DEFINES */
97 /* Opcodes for VF-PF communication. These are placed in the v_opcode field
98 * of the virtchnl_msg structure.
101 /* The PF sends status change events to VFs using
102 * the VIRTCHNL_OP_EVENT opcode.
103 * VFs send requests to the PF using the other ops.
104 * Use of "advanced opcode" features must be negotiated as part of capabilities
105 * exchange and are not considered part of base mode feature set.
107 VIRTCHNL_OP_UNKNOWN = 0,
108 VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
109 VIRTCHNL_OP_RESET_VF = 2,
110 VIRTCHNL_OP_GET_VF_RESOURCES = 3,
111 VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
112 VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
113 VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
114 VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
115 VIRTCHNL_OP_ENABLE_QUEUES = 8,
116 VIRTCHNL_OP_DISABLE_QUEUES = 9,
117 VIRTCHNL_OP_ADD_ETH_ADDR = 10,
118 VIRTCHNL_OP_DEL_ETH_ADDR = 11,
119 VIRTCHNL_OP_ADD_VLAN = 12,
120 VIRTCHNL_OP_DEL_VLAN = 13,
121 VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
122 VIRTCHNL_OP_GET_STATS = 15,
123 VIRTCHNL_OP_RSVD = 16,
124 VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
125 /* opcode 19 is reserved */
126 /* opcodes 20, 21, and 22 are reserved */
127 VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
128 VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
129 VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
130 VIRTCHNL_OP_SET_RSS_HENA = 26,
131 VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27,
132 VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28,
133 VIRTCHNL_OP_REQUEST_QUEUES = 29,
134 VIRTCHNL_OP_ENABLE_CHANNELS = 30,
135 VIRTCHNL_OP_DISABLE_CHANNELS = 31,
136 VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
137 VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
138 VIRTCHNL_OP_INLINE_IPSEC_CRYPTO = 34,
139 /* opcodes 35 and 36 are reserved */
140 VIRTCHNL_OP_DCF_CONFIG_BW = 37,
141 VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
142 VIRTCHNL_OP_DCF_CMD_DESC = 39,
143 VIRTCHNL_OP_DCF_CMD_BUFF = 40,
144 VIRTCHNL_OP_DCF_DISABLE = 41,
145 VIRTCHNL_OP_DCF_GET_VSI_MAP = 42,
146 VIRTCHNL_OP_DCF_GET_PKG_INFO = 43,
147 VIRTCHNL_OP_GET_SUPPORTED_RXDIDS = 44,
148 VIRTCHNL_OP_ADD_RSS_CFG = 45,
149 VIRTCHNL_OP_DEL_RSS_CFG = 46,
150 VIRTCHNL_OP_ADD_FDIR_FILTER = 47,
151 VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
152 VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
153 VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
154 VIRTCHNL_OP_ADD_VLAN_V2 = 52,
155 VIRTCHNL_OP_DEL_VLAN_V2 = 53,
156 VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
157 VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
158 VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56,
159 VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57,
160 VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2 = 58,
161 VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2 = 59,
162 VIRTCHNL_OP_1588_PTP_GET_CAPS = 60,
163 VIRTCHNL_OP_1588_PTP_GET_TIME = 61,
164 VIRTCHNL_OP_GET_QOS_CAPS = 66,
165 VIRTCHNL_OP_CONFIG_QUEUE_TC_MAP = 67,
166 VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
167 VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
168 VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
169 VIRTCHNL_OP_CONFIG_QUEUE_BW = 112,
170 VIRTCHNL_OP_CONFIG_QUANTA = 113,
174 static inline const char *virtchnl_op_str(enum virtchnl_ops v_opcode)
177 case VIRTCHNL_OP_UNKNOWN:
178 return "VIRTCHNL_OP_UNKNOWN";
179 case VIRTCHNL_OP_VERSION:
180 return "VIRTCHNL_OP_VERSION";
181 case VIRTCHNL_OP_RESET_VF:
182 return "VIRTCHNL_OP_RESET_VF";
183 case VIRTCHNL_OP_GET_VF_RESOURCES:
184 return "VIRTCHNL_OP_GET_VF_RESOURCES";
185 case VIRTCHNL_OP_CONFIG_TX_QUEUE:
186 return "VIRTCHNL_OP_CONFIG_TX_QUEUE";
187 case VIRTCHNL_OP_CONFIG_RX_QUEUE:
188 return "VIRTCHNL_OP_CONFIG_RX_QUEUE";
189 case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
190 return "VIRTCHNL_OP_CONFIG_VSI_QUEUES";
191 case VIRTCHNL_OP_CONFIG_IRQ_MAP:
192 return "VIRTCHNL_OP_CONFIG_IRQ_MAP";
193 case VIRTCHNL_OP_ENABLE_QUEUES:
194 return "VIRTCHNL_OP_ENABLE_QUEUES";
195 case VIRTCHNL_OP_DISABLE_QUEUES:
196 return "VIRTCHNL_OP_DISABLE_QUEUES";
197 case VIRTCHNL_OP_ADD_ETH_ADDR:
198 return "VIRTCHNL_OP_ADD_ETH_ADDR";
199 case VIRTCHNL_OP_DEL_ETH_ADDR:
200 return "VIRTCHNL_OP_DEL_ETH_ADDR";
201 case VIRTCHNL_OP_ADD_VLAN:
202 return "VIRTCHNL_OP_ADD_VLAN";
203 case VIRTCHNL_OP_DEL_VLAN:
204 return "VIRTCHNL_OP_DEL_VLAN";
205 case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
206 return "VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE";
207 case VIRTCHNL_OP_GET_STATS:
208 return "VIRTCHNL_OP_GET_STATS";
209 case VIRTCHNL_OP_RSVD:
210 return "VIRTCHNL_OP_RSVD";
211 case VIRTCHNL_OP_EVENT:
212 return "VIRTCHNL_OP_EVENT";
213 case VIRTCHNL_OP_CONFIG_RSS_KEY:
214 return "VIRTCHNL_OP_CONFIG_RSS_KEY";
215 case VIRTCHNL_OP_CONFIG_RSS_LUT:
216 return "VIRTCHNL_OP_CONFIG_RSS_LUT";
217 case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
218 return "VIRTCHNL_OP_GET_RSS_HENA_CAPS";
219 case VIRTCHNL_OP_SET_RSS_HENA:
220 return "VIRTCHNL_OP_SET_RSS_HENA";
221 case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
222 return "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING";
223 case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
224 return "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING";
225 case VIRTCHNL_OP_REQUEST_QUEUES:
226 return "VIRTCHNL_OP_REQUEST_QUEUES";
227 case VIRTCHNL_OP_ENABLE_CHANNELS:
228 return "VIRTCHNL_OP_ENABLE_CHANNELS";
229 case VIRTCHNL_OP_DISABLE_CHANNELS:
230 return "VIRTCHNL_OP_DISABLE_CHANNELS";
231 case VIRTCHNL_OP_ADD_CLOUD_FILTER:
232 return "VIRTCHNL_OP_ADD_CLOUD_FILTER";
233 case VIRTCHNL_OP_DEL_CLOUD_FILTER:
234 return "VIRTCHNL_OP_DEL_CLOUD_FILTER";
235 case VIRTCHNL_OP_INLINE_IPSEC_CRYPTO:
236 return "VIRTCHNL_OP_INLINE_IPSEC_CRYPTO";
237 case VIRTCHNL_OP_DCF_CMD_DESC:
238 return "VIRTCHNL_OP_DCF_CMD_DESC";
239 case VIRTCHNL_OP_DCF_CMD_BUFF:
240 return "VIRTCHNL_OP_DCF_CMD_BUFF";
241 case VIRTCHNL_OP_DCF_DISABLE:
242 return "VIRTCHNL_OP_DCF_DISABLE";
243 case VIRTCHNL_OP_DCF_GET_VSI_MAP:
244 return "VIRTCHNL_OP_DCF_GET_VSI_MAP";
245 case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
246 return "VIRTCHNL_OP_GET_SUPPORTED_RXDIDS";
247 case VIRTCHNL_OP_ADD_RSS_CFG:
248 return "VIRTCHNL_OP_ADD_RSS_CFG";
249 case VIRTCHNL_OP_DEL_RSS_CFG:
250 return "VIRTCHNL_OP_DEL_RSS_CFG";
251 case VIRTCHNL_OP_ADD_FDIR_FILTER:
252 return "VIRTCHNL_OP_ADD_FDIR_FILTER";
253 case VIRTCHNL_OP_DEL_FDIR_FILTER:
254 return "VIRTCHNL_OP_DEL_FDIR_FILTER";
255 case VIRTCHNL_OP_GET_MAX_RSS_QREGION:
256 return "VIRTCHNL_OP_GET_MAX_RSS_QREGION";
257 case VIRTCHNL_OP_ENABLE_QUEUES_V2:
258 return "VIRTCHNL_OP_ENABLE_QUEUES_V2";
259 case VIRTCHNL_OP_DISABLE_QUEUES_V2:
260 return "VIRTCHNL_OP_DISABLE_QUEUES_V2";
261 case VIRTCHNL_OP_MAP_QUEUE_VECTOR:
262 return "VIRTCHNL_OP_MAP_QUEUE_VECTOR";
263 case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
264 return "VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS";
265 case VIRTCHNL_OP_ADD_VLAN_V2:
266 return "VIRTCHNL_OP_ADD_VLAN_V2";
267 case VIRTCHNL_OP_DEL_VLAN_V2:
268 return "VIRTCHNL_OP_DEL_VLAN_V2";
269 case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
270 return "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2";
271 case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
272 return "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2";
273 case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
274 return "VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2";
275 case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
276 return "VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2";
277 case VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2:
278 return "VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2";
279 case VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2:
280 return "VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2";
281 case VIRTCHNL_OP_1588_PTP_GET_CAPS:
282 return "VIRTCHNL_OP_1588_PTP_GET_CAPS";
283 case VIRTCHNL_OP_1588_PTP_GET_TIME:
284 return "VIRTCHNL_OP_1588_PTP_GET_TIME";
285 case VIRTCHNL_OP_MAX:
286 return "VIRTCHNL_OP_MAX";
288 return "Unsupported (update virtchnl.h)";
292 /* These macros are used to generate compilation errors if a structure/union
293 * is not exactly the correct length. It gives a divide by zero error if the
294 * structure/union is not of the correct size, otherwise it creates an enum
295 * that is never used.
297 #define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \
298 { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
299 #define VIRTCHNL_CHECK_UNION_LEN(n, X) enum virtchnl_static_asset_enum_##X \
300 { virtchnl_static_assert_##X = (n)/((sizeof(union X) == (n)) ? 1 : 0) }
302 /* Virtual channel message descriptor. This overlays the admin queue
303 * descriptor. All other data is passed in external buffers.
306 struct virtchnl_msg {
307 u8 pad[8]; /* AQ flags/opcode/len/retval fields */
309 /* avoid confusion with desc->opcode */
310 enum virtchnl_ops v_opcode;
312 /* ditto for desc->retval */
313 enum virtchnl_status_code v_retval;
314 u32 vfid; /* used by PF when sending to VF */
317 VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg);
319 /* Message descriptions and data structures. */
321 /* VIRTCHNL_OP_VERSION
322 * VF posts its version number to the PF. PF responds with its version number
323 * in the same format, along with a return code.
324 * Reply from PF has its major/minor versions also in param0 and param1.
325 * If there is a major version mismatch, then the VF cannot operate.
326 * If there is a minor version mismatch, then the VF can operate but should
327 * add a warning to the system log.
329 * This enum element MUST always be specified as == 1, regardless of other
330 * changes in the API. The PF must always respond to this message without
331 * error regardless of version mismatch.
333 #define VIRTCHNL_VERSION_MAJOR 1
334 #define VIRTCHNL_VERSION_MINOR 1
335 #define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
337 struct virtchnl_version_info {
342 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
344 #define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))
345 #define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
347 /* VIRTCHNL_OP_RESET_VF
348 * VF sends this request to PF with no parameters
349 * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
350 * until reset completion is indicated. The admin queue must be reinitialized
351 * after this operation.
353 * When reset is complete, PF must ensure that all queues in all VSIs associated
354 * with the VF are stopped, all queue configurations in the HMC are set to 0,
355 * and all MAC and VLAN filters (except the default MAC address) on all VSIs
359 /* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV
360 * vsi_type should always be 6 for backward compatibility. Add other fields
363 enum virtchnl_vsi_type {
364 VIRTCHNL_VSI_TYPE_INVALID = 0,
365 VIRTCHNL_VSI_SRIOV = 6,
368 /* VIRTCHNL_OP_GET_VF_RESOURCES
369 * Version 1.0 VF sends this request to PF with no parameters
370 * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
371 * PF responds with an indirect message containing
372 * virtchnl_vf_resource and one or more
373 * virtchnl_vsi_resource structures.
376 struct virtchnl_vsi_resource {
380 /* see enum virtchnl_vsi_type */
383 u8 default_mac_addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
386 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
388 /* VF capability flags
389 * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
390 * TX/RX Checksum offloading and TSO for non-tunnelled packets.
392 #define VIRTCHNL_VF_OFFLOAD_L2 BIT(0)
393 #define VIRTCHNL_VF_OFFLOAD_IWARP BIT(1)
394 #define VIRTCHNL_VF_OFFLOAD_RSVD BIT(2)
395 #define VIRTCHNL_VF_OFFLOAD_RSS_AQ BIT(3)
396 #define VIRTCHNL_VF_OFFLOAD_RSS_REG BIT(4)
397 #define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR BIT(5)
398 #define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES BIT(6)
399 /* used to negotiate communicating link speeds in Mbps */
400 #define VIRTCHNL_VF_CAP_ADV_LINK_SPEED BIT(7)
401 #define VIRTCHNL_VF_OFFLOAD_INLINE_IPSEC_CRYPTO BIT(8)
402 #define VIRTCHNL_VF_LARGE_NUM_QPAIRS BIT(9)
403 #define VIRTCHNL_VF_OFFLOAD_CRC BIT(10)
404 #define VIRTCHNL_VF_OFFLOAD_VLAN_V2 BIT(15)
405 #define VIRTCHNL_VF_OFFLOAD_VLAN BIT(16)
406 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING BIT(17)
407 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 BIT(18)
408 #define VIRTCHNL_VF_OFFLOAD_RSS_PF BIT(19)
409 #define VIRTCHNL_VF_OFFLOAD_ENCAP BIT(20)
410 #define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM BIT(21)
411 #define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM BIT(22)
412 #define VIRTCHNL_VF_OFFLOAD_ADQ BIT(23)
413 #define VIRTCHNL_VF_OFFLOAD_ADQ_V2 BIT(24)
414 #define VIRTCHNL_VF_OFFLOAD_USO BIT(25)
415 #define VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC BIT(26)
416 #define VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF BIT(27)
417 #define VIRTCHNL_VF_OFFLOAD_FDIR_PF BIT(28)
418 #define VIRTCHNL_VF_OFFLOAD_QOS BIT(29)
419 #define VIRTCHNL_VF_CAP_DCF BIT(30)
420 #define VIRTCHNL_VF_CAP_PTP BIT(31)
422 #define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
423 VIRTCHNL_VF_OFFLOAD_VLAN | \
424 VIRTCHNL_VF_OFFLOAD_RSS_PF)
426 struct virtchnl_vf_resource {
436 struct virtchnl_vsi_resource vsi_res[1];
439 VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource);
441 /* VIRTCHNL_OP_CONFIG_TX_QUEUE
442 * VF sends this message to set up parameters for one TX queue.
443 * External data buffer contains one instance of virtchnl_txq_info.
444 * PF configures requested queue and returns a status code.
447 /* Tx queue config info */
448 struct virtchnl_txq_info {
451 u16 ring_len; /* number of descriptors, multiple of 8 */
452 u16 headwb_enabled; /* deprecated with AVF 1.0 */
454 u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
457 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
459 /* RX descriptor IDs (range from 0 to 63) */
460 enum virtchnl_rx_desc_ids {
461 VIRTCHNL_RXDID_0_16B_BASE = 0,
462 /* 32B_BASE and FLEX_SPLITQ share desc ids as default descriptors
463 * because they can be differentiated based on queue model; e.g. single
464 * queue model can only use 32B_BASE and split queue model can only use
465 * FLEX_SPLITQ. Having these as 1 allows them to be used as default
466 * descriptors without negotiation.
468 VIRTCHNL_RXDID_1_32B_BASE = 1,
469 VIRTCHNL_RXDID_1_FLEX_SPLITQ = 1,
470 VIRTCHNL_RXDID_2_FLEX_SQ_NIC = 2,
471 VIRTCHNL_RXDID_3_FLEX_SQ_SW = 3,
472 VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB = 4,
473 VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL = 5,
474 VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2 = 6,
475 VIRTCHNL_RXDID_7_HW_RSVD = 7,
476 /* 9 through 15 are reserved */
477 VIRTCHNL_RXDID_16_COMMS_GENERIC = 16,
478 VIRTCHNL_RXDID_17_COMMS_AUX_VLAN = 17,
479 VIRTCHNL_RXDID_18_COMMS_AUX_IPV4 = 18,
480 VIRTCHNL_RXDID_19_COMMS_AUX_IPV6 = 19,
481 VIRTCHNL_RXDID_20_COMMS_AUX_FLOW = 20,
482 VIRTCHNL_RXDID_21_COMMS_AUX_TCP = 21,
483 /* 22 through 63 are reserved */
486 /* RX descriptor ID bitmasks */
487 enum virtchnl_rx_desc_id_bitmasks {
488 VIRTCHNL_RXDID_0_16B_BASE_M = BIT(VIRTCHNL_RXDID_0_16B_BASE),
489 VIRTCHNL_RXDID_1_32B_BASE_M = BIT(VIRTCHNL_RXDID_1_32B_BASE),
490 VIRTCHNL_RXDID_1_FLEX_SPLITQ_M = BIT(VIRTCHNL_RXDID_1_FLEX_SPLITQ),
491 VIRTCHNL_RXDID_2_FLEX_SQ_NIC_M = BIT(VIRTCHNL_RXDID_2_FLEX_SQ_NIC),
492 VIRTCHNL_RXDID_3_FLEX_SQ_SW_M = BIT(VIRTCHNL_RXDID_3_FLEX_SQ_SW),
493 VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB_M = BIT(VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB),
494 VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL_M = BIT(VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL),
495 VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2_M = BIT(VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2),
496 VIRTCHNL_RXDID_7_HW_RSVD_M = BIT(VIRTCHNL_RXDID_7_HW_RSVD),
497 /* 9 through 15 are reserved */
498 VIRTCHNL_RXDID_16_COMMS_GENERIC_M = BIT(VIRTCHNL_RXDID_16_COMMS_GENERIC),
499 VIRTCHNL_RXDID_17_COMMS_AUX_VLAN_M = BIT(VIRTCHNL_RXDID_17_COMMS_AUX_VLAN),
500 VIRTCHNL_RXDID_18_COMMS_AUX_IPV4_M = BIT(VIRTCHNL_RXDID_18_COMMS_AUX_IPV4),
501 VIRTCHNL_RXDID_19_COMMS_AUX_IPV6_M = BIT(VIRTCHNL_RXDID_19_COMMS_AUX_IPV6),
502 VIRTCHNL_RXDID_20_COMMS_AUX_FLOW_M = BIT(VIRTCHNL_RXDID_20_COMMS_AUX_FLOW),
503 VIRTCHNL_RXDID_21_COMMS_AUX_TCP_M = BIT(VIRTCHNL_RXDID_21_COMMS_AUX_TCP),
504 /* 22 through 63 are reserved */
507 /* virtchnl_rxq_info_flags
509 * Definition of bits in the flags field of the virtchnl_rxq_info structure.
511 enum virtchnl_rxq_info_flags {
512 /* If the VIRTCHNL_PTP_RX_TSTAMP bit of the flag field is set, this is
513 * a request to enable Rx timestamp. Other flag bits are currently
514 * reserved and they may be extended in the future.
516 VIRTCHNL_PTP_RX_TSTAMP = BIT(0),
519 /* VIRTCHNL_OP_CONFIG_RX_QUEUE
520 * VF sends this message to set up parameters for one RX queue.
521 * External data buffer contains one instance of virtchnl_rxq_info.
522 * PF configures requested queue and returns a status code. The
523 * crc_disable flag disables CRC stripping on the VF. Setting
524 * the crc_disable flag to 1 will disable CRC stripping for each
525 * queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC
526 * offload must have been set prior to sending this info or the PF
527 * will ignore the request. This flag should be set the same for
528 * all of the queues for a VF.
531 /* Rx queue config info */
532 struct virtchnl_rxq_info {
535 u32 ring_len; /* number of descriptors, multiple of 32 */
537 u16 splithdr_enabled; /* deprecated with AVF 1.0 */
541 /* see enum virtchnl_rx_desc_ids;
542 * only used when VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is supported. Note
543 * that when the offload is not supported, the descriptor format aligns
544 * with VIRTCHNL_RXDID_1_32B_BASE.
547 u8 flags; /* see virtchnl_rxq_info_flags */
551 /* see enum virtchnl_rx_hsplit; deprecated with AVF 1.0 */
556 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
558 /* VIRTCHNL_OP_CONFIG_VSI_QUEUES
559 * VF sends this message to set parameters for active TX and RX queues
560 * associated with the specified VSI.
561 * PF configures queues and returns status.
562 * If the number of queues specified is greater than the number of queues
563 * associated with the VSI, an error is returned and no queues are configured.
564 * NOTE: The VF is not required to configure all queues in a single request.
565 * It may send multiple messages. PF drivers must correctly handle all VF
568 struct virtchnl_queue_pair_info {
569 /* NOTE: vsi_id and queue_id should be identical for both queues. */
570 struct virtchnl_txq_info txq;
571 struct virtchnl_rxq_info rxq;
574 VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
576 struct virtchnl_vsi_queue_config_info {
580 struct virtchnl_queue_pair_info qpair[1];
583 VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info);
585 /* VIRTCHNL_OP_REQUEST_QUEUES
586 * VF sends this message to request the PF to allocate additional queues to
587 * this VF. Each VF gets a guaranteed number of queues on init but asking for
588 * additional queues must be negotiated. This is a best effort request as it
589 * is possible the PF does not have enough queues left to support the request.
590 * If the PF cannot support the number requested it will respond with the
591 * maximum number it is able to support. If the request is successful, PF will
592 * then reset the VF to institute required changes.
595 /* VF resource request */
596 struct virtchnl_vf_res_request {
600 /* VIRTCHNL_OP_CONFIG_IRQ_MAP
601 * VF uses this message to map vectors to queues.
602 * The rxq_map and txq_map fields are bitmaps used to indicate which queues
603 * are to be associated with the specified vector.
604 * The "other" causes are always mapped to vector 0. The VF may not request
605 * that vector 0 be used for traffic.
606 * PF configures interrupt mapping and returns status.
607 * NOTE: due to hardware requirements, all active queues (both TX and RX)
608 * should be mapped to interrupts, even if the driver intends to operate
609 * only in polling mode. In this case the interrupt may be disabled, but
610 * the ITR timer will still run to trigger writebacks.
612 struct virtchnl_vector_map {
621 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
623 struct virtchnl_irq_map_info {
625 struct virtchnl_vector_map vecmap[1];
628 VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info);
630 /* VIRTCHNL_OP_ENABLE_QUEUES
631 * VIRTCHNL_OP_DISABLE_QUEUES
632 * VF sends these message to enable or disable TX/RX queue pairs.
633 * The queues fields are bitmaps indicating which queues to act upon.
634 * (Currently, we only support 16 queues per VF, but we make the field
635 * u32 to allow for expansion.)
636 * PF performs requested action and returns status.
637 * NOTE: The VF is not required to enable/disable all queues in a single
638 * request. It may send multiple messages.
639 * PF drivers must correctly handle all VF requests.
641 struct virtchnl_queue_select {
648 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
650 /* VIRTCHNL_OP_GET_MAX_RSS_QREGION
652 * if VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
653 * then this op must be supported.
655 * VF sends this message in order to query the max RSS queue region
656 * size supported by PF, when VIRTCHNL_VF_LARGE_NUM_QPAIRS is enabled.
657 * This information should be used when configuring the RSS LUT and/or
658 * configuring queue region based filters.
660 * The maximum RSS queue region is 2^qregion_width. So, a qregion_width
661 * of 6 would inform the VF that the PF supports a maximum RSS queue region
664 * A queue region represents a range of queues that can be used to configure
665 * a RSS LUT. For example, if a VF is given 64 queues, but only a max queue
666 * region size of 16 (i.e. 2^qregion_width = 16) then it will only be able
667 * to configure the RSS LUT with queue indices from 0 to 15. However, other
668 * filters can be used to direct packets to queues >15 via specifying a queue
669 * base/offset and queue region width.
671 struct virtchnl_max_rss_qregion {
677 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_max_rss_qregion);
679 /* VIRTCHNL_OP_ADD_ETH_ADDR
680 * VF sends this message in order to add one or more unicast or multicast
681 * address filters for the specified VSI.
682 * PF adds the filters and returns status.
685 /* VIRTCHNL_OP_DEL_ETH_ADDR
686 * VF sends this message in order to remove one or more unicast or multicast
687 * filters for the specified VSI.
688 * PF removes the filters and returns status.
691 /* VIRTCHNL_ETHER_ADDR_LEGACY
692 * Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad
693 * bytes. Moving forward all VF drivers should not set type to
694 * VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy
695 * behavior. The control plane function (i.e. PF) can use a best effort method
696 * of tracking the primary/device unicast in this case, but there is no
697 * guarantee and functionality depends on the implementation of the PF.
700 /* VIRTCHNL_ETHER_ADDR_PRIMARY
701 * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the
702 * primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and
703 * VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane
704 * function (i.e. PF) to accurately track and use this MAC address for
705 * displaying on the host and for VM/function reset.
708 /* VIRTCHNL_ETHER_ADDR_EXTRA
709 * All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra
710 * unicast and/or multicast filters that are being added/deleted via
711 * VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively.
713 struct virtchnl_ether_addr {
714 u8 addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
716 #define VIRTCHNL_ETHER_ADDR_LEGACY 0
717 #define VIRTCHNL_ETHER_ADDR_PRIMARY 1
718 #define VIRTCHNL_ETHER_ADDR_EXTRA 2
719 #define VIRTCHNL_ETHER_ADDR_TYPE_MASK 3 /* first two bits of type are valid */
723 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
725 struct virtchnl_ether_addr_list {
728 struct virtchnl_ether_addr list[1];
731 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list);
733 /* VIRTCHNL_OP_ADD_VLAN
734 * VF sends this message to add one or more VLAN tag filters for receives.
735 * PF adds the filters and returns status.
736 * If a port VLAN is configured by the PF, this operation will return an
740 /* VIRTCHNL_OP_DEL_VLAN
741 * VF sends this message to remove one or more VLAN tag filters for receives.
742 * PF removes the filters and returns status.
743 * If a port VLAN is configured by the PF, this operation will return an
747 struct virtchnl_vlan_filter_list {
753 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
755 /* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
756 * structures and opcodes.
758 * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
759 * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
761 * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
762 * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
763 * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
765 * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
766 * by the PF concurrently. For example, if the PF can support
767 * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
768 * would OR the following bits:
770 * VIRTHCNL_VLAN_ETHERTYPE_8100 |
771 * VIRTCHNL_VLAN_ETHERTYPE_88A8 |
772 * VIRTCHNL_VLAN_ETHERTYPE_AND;
774 * The VF would interpret this as VLAN filtering can be supported on both 0x8100
775 * and 0x88A8 VLAN ethertypes.
777 * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
778 * by the PF concurrently. For example if the PF can support
779 * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
780 * offload it would OR the following bits:
782 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
783 * VIRTCHNL_VLAN_ETHERTYPE_88A8 |
784 * VIRTCHNL_VLAN_ETHERTYPE_XOR;
786 * The VF would interpret this as VLAN stripping can be supported on either
787 * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
788 * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
789 * the previously set value.
791 * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or
792 * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors.
794 * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware
795 * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor.
797 * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware
798 * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor.
800 * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
801 * VLAN filtering if the underlying PF supports it.
803 * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
804 * certain VLAN capability can be toggled. For example if the underlying PF/CP
805 * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
806 * set this bit along with the supported ethertypes.
808 enum virtchnl_vlan_support {
809 VIRTCHNL_VLAN_UNSUPPORTED = 0,
810 VIRTCHNL_VLAN_ETHERTYPE_8100 = 0x00000001,
811 VIRTCHNL_VLAN_ETHERTYPE_88A8 = 0x00000002,
812 VIRTCHNL_VLAN_ETHERTYPE_9100 = 0x00000004,
813 VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 = 0x00000100,
814 VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 = 0x00000200,
815 VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 = 0x00000400,
816 VIRTCHNL_VLAN_PRIO = 0x01000000,
817 VIRTCHNL_VLAN_FILTER_MASK = 0x10000000,
818 VIRTCHNL_VLAN_ETHERTYPE_AND = 0x20000000,
819 VIRTCHNL_VLAN_ETHERTYPE_XOR = 0x40000000,
820 VIRTCHNL_VLAN_TOGGLE = 0x80000000
823 /* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
824 * for filtering, insertion, and stripping capabilities.
826 * If only outer capabilities are supported (for filtering, insertion, and/or
827 * stripping) then this refers to the outer most or single VLAN from the VF's
830 * If only inner capabilities are supported (for filtering, insertion, and/or
831 * stripping) then this refers to the outer most or single VLAN from the VF's
832 * perspective. Functionally this is the same as if only outer capabilities are
833 * supported. The VF driver is just forced to use the inner fields when
834 * adding/deleting filters and enabling/disabling offloads (if supported).
836 * If both outer and inner capabilities are supported (for filtering, insertion,
837 * and/or stripping) then outer refers to the outer most or single VLAN and
838 * inner refers to the second VLAN, if it exists, in the packet.
840 * There is no support for tunneled VLAN offloads, so outer or inner are never
841 * referring to a tunneled packet from the VF's perspective.
843 struct virtchnl_vlan_supported_caps {
848 /* The PF populates these fields based on the supported VLAN filtering. If a
849 * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
850 * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
851 * the unsupported fields.
853 * Also, a VF is only allowed to toggle its VLAN filtering setting if the
854 * VIRTCHNL_VLAN_TOGGLE bit is set.
856 * The ethertype(s) specified in the ethertype_init field are the ethertypes
857 * enabled for VLAN filtering. VLAN filtering in this case refers to the outer
858 * most VLAN from the VF's perspective. If both inner and outer filtering are
859 * allowed then ethertype_init only refers to the outer most VLAN as only
860 * VLAN ethertype supported for inner VLAN filtering is
861 * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled
862 * when both inner and outer filtering are allowed.
864 * The max_filters field tells the VF how many VLAN filters it's allowed to have
865 * at any one time. If it exceeds this amount and tries to add another filter,
866 * then the request will be rejected by the PF. To prevent failures, the VF
867 * should keep track of how many VLAN filters it has added and not attempt to
868 * add more than max_filters.
870 struct virtchnl_vlan_filtering_caps {
871 struct virtchnl_vlan_supported_caps filtering_support;
877 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps);
879 /* This enum is used for the virtchnl_vlan_offload_caps structure to specify
880 * if the PF supports a different ethertype for stripping and insertion.
882 * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
883 * for stripping affect the ethertype(s) specified for insertion and visa versa
884 * as well. If the VF tries to configure VLAN stripping via
885 * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
886 * that will be the ethertype for both stripping and insertion.
888 * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
889 * stripping do not affect the ethertype(s) specified for insertion and visa
892 enum virtchnl_vlan_ethertype_match {
893 VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
894 VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
897 /* The PF populates these fields based on the supported VLAN offloads. If a
898 * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
899 * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
900 * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
902 * Also, a VF is only allowed to toggle its VLAN offload setting if the
903 * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set.
905 * The VF driver needs to be aware of how the tags are stripped by hardware and
906 * inserted by the VF driver based on the level of offload support. The PF will
907 * populate these fields based on where the VLAN tags are expected to be
908 * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to
909 * interpret these fields. See the definition of the
910 * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support
913 struct virtchnl_vlan_offload_caps {
914 struct virtchnl_vlan_supported_caps stripping_support;
915 struct virtchnl_vlan_supported_caps insertion_support;
921 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps);
923 /* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
924 * VF sends this message to determine its VLAN capabilities.
926 * PF will mark which capabilities it supports based on hardware support and
927 * current configuration. For example, if a port VLAN is configured the PF will
928 * not allow outer VLAN filtering, stripping, or insertion to be configured so
929 * it will block these features from the VF.
931 * The VF will need to cross reference its capabilities with the PFs
932 * capabilities in the response message from the PF to determine the VLAN
935 struct virtchnl_vlan_caps {
936 struct virtchnl_vlan_filtering_caps filtering;
937 struct virtchnl_vlan_offload_caps offloads;
940 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps);
942 struct virtchnl_vlan {
943 u16 tci; /* tci[15:13] = PCP and tci[11:0] = VID */
944 u16 tci_mask; /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in
947 u16 tpid; /* 0x8100, 0x88a8, etc. and only type(s) set in
948 * filtering caps. Note that tpid here does not refer to
949 * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the
950 * actual 2-byte VLAN TPID
955 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
957 struct virtchnl_vlan_filter {
958 struct virtchnl_vlan inner;
959 struct virtchnl_vlan outer;
963 VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
965 /* VIRTCHNL_OP_ADD_VLAN_V2
966 * VIRTCHNL_OP_DEL_VLAN_V2
968 * VF sends these messages to add/del one or more VLAN tag filters for Rx
971 * The PF attempts to add the filters and returns status.
973 * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
974 * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
976 struct virtchnl_vlan_filter_list_v2 {
980 struct virtchnl_vlan_filter filters[1];
983 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
985 /* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
986 * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
987 * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2
988 * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2
990 * VF sends this message to enable or disable VLAN stripping or insertion. It
991 * also needs to specify an ethertype. The VF knows which VLAN ethertypes are
992 * allowed and whether or not it's allowed to enable/disable the specific
993 * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
994 * parse the virtchnl_vlan_caps.offloads fields to determine which offload
995 * messages are allowed.
997 * For example, if the PF populates the virtchnl_vlan_caps.offloads in the
998 * following manner the VF will be allowed to enable and/or disable 0x8100 inner
999 * VLAN insertion and/or stripping via the opcodes listed above. Inner in this
1000 * case means the outer most or single VLAN from the VF's perspective. This is
1001 * because no outer offloads are supported. See the comments above the
1002 * virtchnl_vlan_supported_caps structure for more details.
1004 * virtchnl_vlan_caps.offloads.stripping_support.inner =
1005 * VIRTCHNL_VLAN_TOGGLE |
1006 * VIRTCHNL_VLAN_ETHERTYPE_8100;
1008 * virtchnl_vlan_caps.offloads.insertion_support.inner =
1009 * VIRTCHNL_VLAN_TOGGLE |
1010 * VIRTCHNL_VLAN_ETHERTYPE_8100;
1012 * In order to enable inner (again note that in this case inner is the outer
1013 * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100
1014 * VLANs, the VF would populate the virtchnl_vlan_setting structure in the
1015 * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
1017 * virtchnl_vlan_setting.inner_ethertype_setting =
1018 * VIRTCHNL_VLAN_ETHERTYPE_8100;
1020 * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
1023 * The reason that VLAN TPID(s) are not being used for the
1024 * outer_ethertype_setting and inner_ethertype_setting fields is because it's
1025 * possible a device could support VLAN insertion and/or stripping offload on
1026 * multiple ethertypes concurrently, so this method allows a VF to request
1027 * multiple ethertypes in one message using the virtchnl_vlan_support
1030 * For example, if the PF populates the virtchnl_vlan_caps.offloads in the
1031 * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer
1032 * VLAN insertion and stripping simultaneously. The
1033 * virtchnl_vlan_caps.offloads.ethertype_match field will also have to be
1034 * populated based on what the PF can support.
1036 * virtchnl_vlan_caps.offloads.stripping_support.outer =
1037 * VIRTCHNL_VLAN_TOGGLE |
1038 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
1039 * VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1040 * VIRTCHNL_VLAN_ETHERTYPE_AND;
1042 * virtchnl_vlan_caps.offloads.insertion_support.outer =
1043 * VIRTCHNL_VLAN_TOGGLE |
1044 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
1045 * VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1046 * VIRTCHNL_VLAN_ETHERTYPE_AND;
1048 * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF
1049 * would populate the virthcnl_vlan_offload_structure in the following manner
1050 * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
1052 * virtchnl_vlan_setting.outer_ethertype_setting =
1053 * VIRTHCNL_VLAN_ETHERTYPE_8100 |
1054 * VIRTHCNL_VLAN_ETHERTYPE_88A8;
1056 * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
1059 * There is also the case where a PF and the underlying hardware can support
1060 * VLAN offloads on multiple ethertypes, but not concurrently. For example, if
1061 * the PF populates the virtchnl_vlan_caps.offloads in the following manner the
1062 * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN
1063 * offloads. The ethertypes must match for stripping and insertion.
1065 * virtchnl_vlan_caps.offloads.stripping_support.outer =
1066 * VIRTCHNL_VLAN_TOGGLE |
1067 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
1068 * VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1069 * VIRTCHNL_VLAN_ETHERTYPE_XOR;
1071 * virtchnl_vlan_caps.offloads.insertion_support.outer =
1072 * VIRTCHNL_VLAN_TOGGLE |
1073 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
1074 * VIRTCHNL_VLAN_ETHERTYPE_88A8 |
1075 * VIRTCHNL_VLAN_ETHERTYPE_XOR;
1077 * virtchnl_vlan_caps.offloads.ethertype_match =
1078 * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION;
1080 * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would
1081 * populate the virtchnl_vlan_setting structure in the following manner and send
1082 * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the
1083 * ethertype for VLAN insertion if it's enabled. So, for completeness, a
1084 * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent.
1086 * virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8;
1088 * virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
1091 * VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2
1092 * VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2
1094 * VF sends this message to enable or disable VLAN filtering. It also needs to
1095 * specify an ethertype. The VF knows which VLAN ethertypes are allowed and
1096 * whether or not it's allowed to enable/disable filtering via the
1097 * VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
1098 * parse the virtchnl_vlan_caps.filtering fields to determine which, if any,
1099 * filtering messages are allowed.
1101 * For example, if the PF populates the virtchnl_vlan_caps.filtering in the
1102 * following manner the VF will be allowed to enable/disable 0x8100 and 0x88a8
1103 * outer VLAN filtering together. Note, that the VIRTCHNL_VLAN_ETHERTYPE_AND
1104 * means that all filtering ethertypes will to be enabled and disabled together
1105 * regardless of the request from the VF. This means that the underlying
1106 * hardware only supports VLAN filtering for all VLAN the specified ethertypes
1109 * virtchnl_vlan_caps.filtering.filtering_support.outer =
1110 * VIRTCHNL_VLAN_TOGGLE |
1111 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
1112 * VIRTHCNL_VLAN_ETHERTYPE_88A8 |
1113 * VIRTCHNL_VLAN_ETHERTYPE_9100 |
1114 * VIRTCHNL_VLAN_ETHERTYPE_AND;
1116 * In order to enable outer VLAN filtering for 0x88a8 and 0x8100 VLANs (0x9100
1117 * VLANs aren't supported by the VF driver), the VF would populate the
1118 * virtchnl_vlan_setting structure in the following manner and send the
1119 * VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2. The same message format would be used
1120 * to disable outer VLAN filtering for 0x88a8 and 0x8100 VLANs, but the
1121 * VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2 opcode is used.
1123 * virtchnl_vlan_setting.outer_ethertype_setting =
1124 * VIRTCHNL_VLAN_ETHERTYPE_8100 |
1125 * VIRTCHNL_VLAN_ETHERTYPE_88A8;
1128 struct virtchnl_vlan_setting {
1129 u32 outer_ethertype_setting;
1130 u32 inner_ethertype_setting;
1135 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting);
1137 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
1138 * VF sends VSI id and flags.
1139 * PF returns status code in retval.
1140 * Note: we assume that broadcast accept mode is always enabled.
1142 struct virtchnl_promisc_info {
1147 VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
1149 #define FLAG_VF_UNICAST_PROMISC 0x00000001
1150 #define FLAG_VF_MULTICAST_PROMISC 0x00000002
1152 /* VIRTCHNL_OP_GET_STATS
1153 * VF sends this message to request stats for the selected VSI. VF uses
1154 * the virtchnl_queue_select struct to specify the VSI. The queue_id
1155 * field is ignored by the PF.
1157 * PF replies with struct virtchnl_eth_stats in an external buffer.
1160 struct virtchnl_eth_stats {
1161 u64 rx_bytes; /* received bytes */
1162 u64 rx_unicast; /* received unicast pkts */
1163 u64 rx_multicast; /* received multicast pkts */
1164 u64 rx_broadcast; /* received broadcast pkts */
1166 u64 rx_unknown_protocol;
1167 u64 tx_bytes; /* transmitted bytes */
1168 u64 tx_unicast; /* transmitted unicast pkts */
1169 u64 tx_multicast; /* transmitted multicast pkts */
1170 u64 tx_broadcast; /* transmitted broadcast pkts */
1175 /* VIRTCHNL_OP_CONFIG_RSS_KEY
1176 * VIRTCHNL_OP_CONFIG_RSS_LUT
1177 * VF sends these messages to configure RSS. Only supported if both PF
1178 * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during
1179 * configuration negotiation. If this is the case, then the RSS fields in
1180 * the VF resource struct are valid.
1181 * Both the key and LUT are initialized to 0 by the PF, meaning that
1182 * RSS is effectively disabled until set up by the VF.
1184 struct virtchnl_rss_key {
1187 u8 key[1]; /* RSS hash key, packed bytes */
1190 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key);
1192 struct virtchnl_rss_lut {
1195 u8 lut[1]; /* RSS lookup table */
1198 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut);
1200 /* VIRTCHNL_OP_GET_RSS_HENA_CAPS
1201 * VIRTCHNL_OP_SET_RSS_HENA
1202 * VF sends these messages to get and set the hash filter enable bits for RSS.
1203 * By default, the PF sets these to all possible traffic types that the
1204 * hardware supports. The VF can query this value if it wants to change the
1205 * traffic types that are hashed by the hardware.
1207 struct virtchnl_rss_hena {
1211 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena);
1213 /* Type of RSS algorithm */
1214 enum virtchnl_rss_algorithm {
1215 VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0,
1216 VIRTCHNL_RSS_ALG_XOR_ASYMMETRIC = 1,
1217 VIRTCHNL_RSS_ALG_TOEPLITZ_SYMMETRIC = 2,
1218 VIRTCHNL_RSS_ALG_XOR_SYMMETRIC = 3,
1221 /* This is used by PF driver to enforce how many channels can be supported.
1222 * When ADQ_V2 capability is negotiated, it will allow 16 channels otherwise
1223 * PF driver will allow only max 4 channels
1225 #define VIRTCHNL_MAX_ADQ_CHANNELS 4
1226 #define VIRTCHNL_MAX_ADQ_V2_CHANNELS 16
1228 /* VIRTCHNL_OP_ENABLE_CHANNELS
1229 * VIRTCHNL_OP_DISABLE_CHANNELS
1230 * VF sends these messages to enable or disable channels based on
1231 * the user specified queue count and queue offset for each traffic class.
1232 * This struct encompasses all the information that the PF needs from
1233 * VF to create a channel.
1235 struct virtchnl_channel_info {
1236 u16 count; /* number of queues in a channel */
1237 u16 offset; /* queues in a channel start from 'offset' */
1242 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_channel_info);
1244 struct virtchnl_tc_info {
1247 struct virtchnl_channel_info list[1];
1250 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_tc_info);
1252 /* VIRTCHNL_ADD_CLOUD_FILTER
1253 * VIRTCHNL_DEL_CLOUD_FILTER
1254 * VF sends these messages to add or delete a cloud filter based on the
1255 * user specified match and action filters. These structures encompass
1256 * all the information that the PF needs from the VF to add/delete a
1260 struct virtchnl_l4_spec {
1261 u8 src_mac[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
1262 u8 dst_mac[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
1263 /* vlan_prio is part of this 16 bit field even from OS perspective
1264 * vlan_id:12 is actual vlan_id, then vlanid:bit14..12 is vlan_prio
1265 * in future, when decided to offload vlan_prio, pass that information
1266 * as part of the "vlan_id" field, Bit14..12
1269 __be16 pad; /* reserved for future use */
1276 VIRTCHNL_CHECK_STRUCT_LEN(52, virtchnl_l4_spec);
1278 union virtchnl_flow_spec {
1279 struct virtchnl_l4_spec tcp_spec;
1280 u8 buffer[128]; /* reserved for future use */
1283 VIRTCHNL_CHECK_UNION_LEN(128, virtchnl_flow_spec);
1285 enum virtchnl_action {
1287 VIRTCHNL_ACTION_DROP = 0,
1288 VIRTCHNL_ACTION_TC_REDIRECT,
1289 VIRTCHNL_ACTION_PASSTHRU,
1290 VIRTCHNL_ACTION_QUEUE,
1291 VIRTCHNL_ACTION_Q_REGION,
1292 VIRTCHNL_ACTION_MARK,
1293 VIRTCHNL_ACTION_COUNT,
1296 enum virtchnl_flow_type {
1298 VIRTCHNL_TCP_V4_FLOW = 0,
1299 VIRTCHNL_TCP_V6_FLOW,
1300 VIRTCHNL_UDP_V4_FLOW,
1301 VIRTCHNL_UDP_V6_FLOW,
1304 struct virtchnl_filter {
1305 union virtchnl_flow_spec data;
1306 union virtchnl_flow_spec mask;
1308 /* see enum virtchnl_flow_type */
1311 /* see enum virtchnl_action */
1317 VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
1319 struct virtchnl_shaper_bw {
1325 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_shaper_bw);
1327 /* VIRTCHNL_OP_DCF_GET_VSI_MAP
1328 * VF sends this message to get VSI mapping table.
1329 * PF responds with an indirect message containing VF's
1331 * The index of vf_vsi array is the logical VF ID, the
1332 * value of vf_vsi array is the VF's HW VSI ID with its
1333 * valid configuration.
1335 struct virtchnl_dcf_vsi_map {
1336 u16 pf_vsi; /* PF's HW VSI ID */
1337 u16 num_vfs; /* The actual number of VFs allocated */
1338 #define VIRTCHNL_DCF_VF_VSI_ID_S 0
1339 #define VIRTCHNL_DCF_VF_VSI_ID_M (0xFFF << VIRTCHNL_DCF_VF_VSI_ID_S)
1340 #define VIRTCHNL_DCF_VF_VSI_VALID BIT(15)
1344 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_dcf_vsi_map);
1346 #define PKG_NAME_SIZE 32
1349 struct pkg_version {
1356 VIRTCHNL_CHECK_STRUCT_LEN(4, pkg_version);
1358 struct virtchnl_pkg_info {
1359 struct pkg_version pkg_ver;
1361 char pkg_name[PKG_NAME_SIZE];
1365 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
1367 /* VIRTCHNL_OP_DCF_VLAN_OFFLOAD
1368 * DCF negotiates the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability firstly to get
1369 * the double VLAN configuration, then DCF sends this message to configure the
1370 * outer or inner VLAN offloads (insertion and strip) for the target VF.
1372 struct virtchnl_dcf_vlan_offload {
1376 #define VIRTCHNL_DCF_VLAN_TYPE_S 0
1377 #define VIRTCHNL_DCF_VLAN_TYPE_M \
1378 (0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
1379 #define VIRTCHNL_DCF_VLAN_TYPE_INNER 0x0
1380 #define VIRTCHNL_DCF_VLAN_TYPE_OUTER 0x1
1381 #define VIRTCHNL_DCF_VLAN_INSERT_MODE_S 1
1382 #define VIRTCHNL_DCF_VLAN_INSERT_MODE_M \
1383 (0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
1384 #define VIRTCHNL_DCF_VLAN_INSERT_DISABLE 0x1
1385 #define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED 0x2
1386 #define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC 0x3
1387 #define VIRTCHNL_DCF_VLAN_STRIP_MODE_S 4
1388 #define VIRTCHNL_DCF_VLAN_STRIP_MODE_M \
1389 (0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
1390 #define VIRTCHNL_DCF_VLAN_STRIP_DISABLE 0x1
1391 #define VIRTCHNL_DCF_VLAN_STRIP_ONLY 0x2
1392 #define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC 0x3
1397 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_dcf_vlan_offload);
1399 struct virtchnl_dcf_bw_cfg {
1401 #define VIRTCHNL_DCF_BW_CIR BIT(0)
1402 #define VIRTCHNL_DCF_BW_PIR BIT(1)
1405 enum virtchnl_bw_limit_type type;
1407 struct virtchnl_shaper_bw shaper;
1412 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_dcf_bw_cfg);
1414 /* VIRTCHNL_OP_DCF_CONFIG_BW
1415 * VF send this message to set the bandwidth configuration of each
1416 * TC with a specific vf id. The flag node_type is to indicate that
1417 * this message is to configure VSI node or TC node bandwidth.
1419 struct virtchnl_dcf_bw_cfg_list {
1422 #define VIRTCHNL_DCF_TARGET_TC_BW 0
1423 #define VIRTCHNL_DCF_TARGET_VF_BW 1
1425 struct virtchnl_dcf_bw_cfg cfg[1];
1428 VIRTCHNL_CHECK_STRUCT_LEN(44, virtchnl_dcf_bw_cfg_list);
1430 struct virtchnl_supported_rxdids {
1431 /* see enum virtchnl_rx_desc_id_bitmasks */
1432 u64 supported_rxdids;
1435 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_supported_rxdids);
1437 /* VIRTCHNL_OP_EVENT
1438 * PF sends this message to inform the VF driver of events that may affect it.
1439 * No direct response is expected from the VF, though it may generate other
1440 * messages in response to this one.
1442 enum virtchnl_event_codes {
1443 VIRTCHNL_EVENT_UNKNOWN = 0,
1444 VIRTCHNL_EVENT_LINK_CHANGE,
1445 VIRTCHNL_EVENT_RESET_IMPENDING,
1446 VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
1447 VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE,
1450 #define PF_EVENT_SEVERITY_INFO 0
1451 #define PF_EVENT_SEVERITY_ATTENTION 1
1452 #define PF_EVENT_SEVERITY_ACTION_REQUIRED 2
1453 #define PF_EVENT_SEVERITY_CERTAIN_DOOM 255
1455 struct virtchnl_pf_event {
1456 /* see enum virtchnl_event_codes */
1459 /* If the PF driver does not support the new speed reporting
1460 * capabilities then use link_event else use link_event_adv to
1461 * get the speed and link information. The ability to understand
1462 * new speeds is indicated by setting the capability flag
1463 * VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter
1464 * in virtchnl_vf_resource struct and can be used to determine
1465 * which link event struct to use below.
1468 enum virtchnl_link_speed link_speed;
1472 /* link_speed provided in Mbps */
1485 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
1488 /* VF reset states - these are written into the RSTAT register:
1489 * VFGEN_RSTAT on the VF
1490 * When the PF initiates a reset, it writes 0
1491 * When the reset is complete, it writes 1
1492 * When the PF detects that the VF has recovered, it writes 2
1493 * VF checks this register periodically to determine if a reset has occurred,
1494 * then polls it to know when the reset is complete.
1495 * If either the PF or VF reads the register while the hardware
1496 * is in a reset state, it will return DEADBEEF, which, when masked
1499 enum virtchnl_vfr_states {
1500 VIRTCHNL_VFR_INPROGRESS = 0,
1501 VIRTCHNL_VFR_COMPLETED,
1502 VIRTCHNL_VFR_VFACTIVE,
1505 #define VIRTCHNL_MAX_NUM_PROTO_HDRS 32
1506 #define VIRTCHNL_MAX_SIZE_RAW_PACKET 1024
1507 #define PROTO_HDR_SHIFT 5
1508 #define PROTO_HDR_FIELD_START(proto_hdr_type) \
1509 (proto_hdr_type << PROTO_HDR_SHIFT)
1510 #define PROTO_HDR_FIELD_MASK ((1UL << PROTO_HDR_SHIFT) - 1)
1512 /* VF use these macros to configure each protocol header.
1513 * Specify which protocol headers and protocol header fields base on
1514 * virtchnl_proto_hdr_type and virtchnl_proto_hdr_field.
1515 * @param hdr: a struct of virtchnl_proto_hdr
1516 * @param hdr_type: ETH/IPV4/TCP, etc
1517 * @param field: SRC/DST/TEID/SPI, etc
1519 #define VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, field) \
1520 ((hdr)->field_selector |= BIT((field) & PROTO_HDR_FIELD_MASK))
1521 #define VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, field) \
1522 ((hdr)->field_selector &= ~BIT((field) & PROTO_HDR_FIELD_MASK))
1523 #define VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val) \
1524 ((hdr)->field_selector & BIT((val) & PROTO_HDR_FIELD_MASK))
1525 #define VIRTCHNL_GET_PROTO_HDR_FIELD(hdr) ((hdr)->field_selector)
1527 #define VIRTCHNL_ADD_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \
1528 (VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, \
1529 VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
1530 #define VIRTCHNL_DEL_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \
1531 (VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, \
1532 VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
1534 #define VIRTCHNL_SET_PROTO_HDR_TYPE(hdr, hdr_type) \
1535 ((hdr)->type = VIRTCHNL_PROTO_HDR_ ## hdr_type)
1536 #define VIRTCHNL_GET_PROTO_HDR_TYPE(hdr) \
1537 (((hdr)->type) >> PROTO_HDR_SHIFT)
1538 #define VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) \
1539 ((hdr)->type == ((val) >> PROTO_HDR_SHIFT))
1540 #define VIRTCHNL_TEST_PROTO_HDR(hdr, val) \
1541 (VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) && \
1542 VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val))
1544 /* Protocol header type within a packet segment. A segment consists of one or
1545 * more protocol headers that make up a logical group of protocol headers. Each
1546 * logical group of protocol headers encapsulates or is encapsulated using/by
1547 * tunneling or encapsulation protocols for network virtualization.
1549 enum virtchnl_proto_hdr_type {
1550 VIRTCHNL_PROTO_HDR_NONE,
1551 VIRTCHNL_PROTO_HDR_ETH,
1552 VIRTCHNL_PROTO_HDR_S_VLAN,
1553 VIRTCHNL_PROTO_HDR_C_VLAN,
1554 VIRTCHNL_PROTO_HDR_IPV4,
1555 VIRTCHNL_PROTO_HDR_IPV6,
1556 VIRTCHNL_PROTO_HDR_TCP,
1557 VIRTCHNL_PROTO_HDR_UDP,
1558 VIRTCHNL_PROTO_HDR_SCTP,
1559 VIRTCHNL_PROTO_HDR_GTPU_IP,
1560 VIRTCHNL_PROTO_HDR_GTPU_EH,
1561 VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN,
1562 VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP,
1563 VIRTCHNL_PROTO_HDR_PPPOE,
1564 VIRTCHNL_PROTO_HDR_L2TPV3,
1565 VIRTCHNL_PROTO_HDR_ESP,
1566 VIRTCHNL_PROTO_HDR_AH,
1567 VIRTCHNL_PROTO_HDR_PFCP,
1568 VIRTCHNL_PROTO_HDR_GTPC,
1569 VIRTCHNL_PROTO_HDR_ECPRI,
1570 VIRTCHNL_PROTO_HDR_L2TPV2,
1571 VIRTCHNL_PROTO_HDR_PPP,
1572 /* IPv4 and IPv6 Fragment header types are only associated to
1573 * VIRTCHNL_PROTO_HDR_IPV4 and VIRTCHNL_PROTO_HDR_IPV6 respectively,
1574 * cannot be used independently.
1576 VIRTCHNL_PROTO_HDR_IPV4_FRAG,
1577 VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG,
1578 VIRTCHNL_PROTO_HDR_GRE,
1581 /* Protocol header field within a protocol header. */
1582 enum virtchnl_proto_hdr_field {
1584 VIRTCHNL_PROTO_HDR_ETH_SRC =
1585 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ETH),
1586 VIRTCHNL_PROTO_HDR_ETH_DST,
1587 VIRTCHNL_PROTO_HDR_ETH_ETHERTYPE,
1589 VIRTCHNL_PROTO_HDR_S_VLAN_ID =
1590 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_S_VLAN),
1592 VIRTCHNL_PROTO_HDR_C_VLAN_ID =
1593 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_C_VLAN),
1595 VIRTCHNL_PROTO_HDR_IPV4_SRC =
1596 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4),
1597 VIRTCHNL_PROTO_HDR_IPV4_DST,
1598 VIRTCHNL_PROTO_HDR_IPV4_DSCP,
1599 VIRTCHNL_PROTO_HDR_IPV4_TTL,
1600 VIRTCHNL_PROTO_HDR_IPV4_PROT,
1601 VIRTCHNL_PROTO_HDR_IPV4_CHKSUM,
1603 VIRTCHNL_PROTO_HDR_IPV6_SRC =
1604 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6),
1605 VIRTCHNL_PROTO_HDR_IPV6_DST,
1606 VIRTCHNL_PROTO_HDR_IPV6_TC,
1607 VIRTCHNL_PROTO_HDR_IPV6_HOP_LIMIT,
1608 VIRTCHNL_PROTO_HDR_IPV6_PROT,
1610 VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_SRC,
1611 VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_DST,
1612 VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_SRC,
1613 VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_DST,
1614 VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_SRC,
1615 VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_DST,
1616 VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_SRC,
1617 VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_DST,
1618 VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_SRC,
1619 VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_DST,
1620 VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_SRC,
1621 VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_DST,
1623 VIRTCHNL_PROTO_HDR_TCP_SRC_PORT =
1624 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_TCP),
1625 VIRTCHNL_PROTO_HDR_TCP_DST_PORT,
1626 VIRTCHNL_PROTO_HDR_TCP_CHKSUM,
1628 VIRTCHNL_PROTO_HDR_UDP_SRC_PORT =
1629 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_UDP),
1630 VIRTCHNL_PROTO_HDR_UDP_DST_PORT,
1631 VIRTCHNL_PROTO_HDR_UDP_CHKSUM,
1633 VIRTCHNL_PROTO_HDR_SCTP_SRC_PORT =
1634 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_SCTP),
1635 VIRTCHNL_PROTO_HDR_SCTP_DST_PORT,
1636 VIRTCHNL_PROTO_HDR_SCTP_CHKSUM,
1638 VIRTCHNL_PROTO_HDR_GTPU_IP_TEID =
1639 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_IP),
1641 VIRTCHNL_PROTO_HDR_GTPU_EH_PDU =
1642 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH),
1643 VIRTCHNL_PROTO_HDR_GTPU_EH_QFI,
1645 VIRTCHNL_PROTO_HDR_PPPOE_SESS_ID =
1646 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PPPOE),
1648 VIRTCHNL_PROTO_HDR_L2TPV3_SESS_ID =
1649 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV3),
1651 VIRTCHNL_PROTO_HDR_ESP_SPI =
1652 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ESP),
1654 VIRTCHNL_PROTO_HDR_AH_SPI =
1655 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_AH),
1657 VIRTCHNL_PROTO_HDR_PFCP_S_FIELD =
1658 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PFCP),
1659 VIRTCHNL_PROTO_HDR_PFCP_SEID,
1661 VIRTCHNL_PROTO_HDR_GTPC_TEID =
1662 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPC),
1664 VIRTCHNL_PROTO_HDR_ECPRI_MSG_TYPE =
1665 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ECPRI),
1666 VIRTCHNL_PROTO_HDR_ECPRI_PC_RTC_ID,
1667 /* IPv4 Dummy Fragment */
1668 VIRTCHNL_PROTO_HDR_IPV4_FRAG_PKID =
1669 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4_FRAG),
1670 /* IPv6 Extension Fragment */
1671 VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG_PKID =
1672 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG),
1674 VIRTCHNL_PROTO_HDR_GTPU_DWN_QFI =
1675 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN),
1676 VIRTCHNL_PROTO_HDR_GTPU_UP_QFI =
1677 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP),
1679 VIRTCHNL_PROTO_HDR_L2TPV2_SESS_ID =
1680 PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV2),
1681 VIRTCHNL_PROTO_HDR_L2TPV2_LEN_SESS_ID,
1684 struct virtchnl_proto_hdr {
1685 /* see enum virtchnl_proto_hdr_type */
1687 u32 field_selector; /* a bit mask to select field for header type */
1690 * binary buffer in network order for specific header type.
1691 * For example, if type = VIRTCHNL_PROTO_HDR_IPV4, a IPv4
1692 * header is expected to be copied into the buffer.
1696 VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr);
1698 struct virtchnl_proto_hdrs {
1701 * specify where protocol header start from. must be 0 when sending a raw packet request.
1702 * 0 - from the outer layer
1703 * 1 - from the first inner layer
1704 * 2 - from the second inner layer
1709 * number of proto layers, must < VIRTCHNL_MAX_NUM_PROTO_HDRS
1710 * must be 0 for a raw packet request.
1713 struct virtchnl_proto_hdr proto_hdr[VIRTCHNL_MAX_NUM_PROTO_HDRS];
1716 u8 spec[VIRTCHNL_MAX_SIZE_RAW_PACKET];
1717 u8 mask[VIRTCHNL_MAX_SIZE_RAW_PACKET];
1722 VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
1724 struct virtchnl_rss_cfg {
1725 struct virtchnl_proto_hdrs proto_hdrs; /* protocol headers */
1727 /* see enum virtchnl_rss_algorithm; rss algorithm type */
1729 u8 reserved[128]; /* reserve for future */
1732 VIRTCHNL_CHECK_STRUCT_LEN(2444, virtchnl_rss_cfg);
1734 /* action configuration for FDIR */
1735 struct virtchnl_filter_action {
1736 /* see enum virtchnl_action type */
1739 /* used for queue and qgroup action */
1744 /* used for count action */
1746 /* share counter ID with other flow rules */
1748 u32 id; /* counter ID */
1750 /* used for mark action */
1756 VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_filter_action);
1758 #define VIRTCHNL_MAX_NUM_ACTIONS 8
1760 struct virtchnl_filter_action_set {
1761 /* action number must be less then VIRTCHNL_MAX_NUM_ACTIONS */
1763 struct virtchnl_filter_action actions[VIRTCHNL_MAX_NUM_ACTIONS];
1766 VIRTCHNL_CHECK_STRUCT_LEN(292, virtchnl_filter_action_set);
1768 /* pattern and action for FDIR rule */
1769 struct virtchnl_fdir_rule {
1770 struct virtchnl_proto_hdrs proto_hdrs;
1771 struct virtchnl_filter_action_set action_set;
1774 VIRTCHNL_CHECK_STRUCT_LEN(2604, virtchnl_fdir_rule);
1776 /* Status returned to VF after VF requests FDIR commands
1777 * VIRTCHNL_FDIR_SUCCESS
1778 * VF FDIR related request is successfully done by PF
1779 * The request can be OP_ADD/DEL/QUERY_FDIR_FILTER.
1781 * VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE
1782 * OP_ADD_FDIR_FILTER request is failed due to no Hardware resource.
1784 * VIRTCHNL_FDIR_FAILURE_RULE_EXIST
1785 * OP_ADD_FDIR_FILTER request is failed due to the rule is already existed.
1787 * VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT
1788 * OP_ADD_FDIR_FILTER request is failed due to conflict with existing rule.
1790 * VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST
1791 * OP_DEL_FDIR_FILTER request is failed due to this rule doesn't exist.
1793 * VIRTCHNL_FDIR_FAILURE_RULE_INVALID
1794 * OP_ADD_FDIR_FILTER request is failed due to parameters validation
1795 * or HW doesn't support.
1797 * VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT
1798 * OP_ADD/DEL_FDIR_FILTER request is failed due to timing out
1801 * VIRTCHNL_FDIR_FAILURE_QUERY_INVALID
1802 * OP_QUERY_FDIR_FILTER request is failed due to parameters validation,
1803 * for example, VF query counter of a rule who has no counter action.
1805 enum virtchnl_fdir_prgm_status {
1806 VIRTCHNL_FDIR_SUCCESS = 0,
1807 VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE,
1808 VIRTCHNL_FDIR_FAILURE_RULE_EXIST,
1809 VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT,
1810 VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST,
1811 VIRTCHNL_FDIR_FAILURE_RULE_INVALID,
1812 VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT,
1813 VIRTCHNL_FDIR_FAILURE_QUERY_INVALID,
1816 /* VIRTCHNL_OP_ADD_FDIR_FILTER
1817 * VF sends this request to PF by filling out vsi_id,
1818 * validate_only and rule_cfg. PF will return flow_id
1819 * if the request is successfully done and return add_status to VF.
1821 struct virtchnl_fdir_add {
1822 u16 vsi_id; /* INPUT */
1824 * 1 for validating a fdir rule, 0 for creating a fdir rule.
1825 * Validate and create share one ops: VIRTCHNL_OP_ADD_FDIR_FILTER.
1827 u16 validate_only; /* INPUT */
1828 u32 flow_id; /* OUTPUT */
1829 struct virtchnl_fdir_rule rule_cfg; /* INPUT */
1831 /* see enum virtchnl_fdir_prgm_status; OUTPUT */
1835 VIRTCHNL_CHECK_STRUCT_LEN(2616, virtchnl_fdir_add);
1837 /* VIRTCHNL_OP_DEL_FDIR_FILTER
1838 * VF sends this request to PF by filling out vsi_id
1839 * and flow_id. PF will return del_status to VF.
1841 struct virtchnl_fdir_del {
1842 u16 vsi_id; /* INPUT */
1844 u32 flow_id; /* INPUT */
1846 /* see enum virtchnl_fdir_prgm_status; OUTPUT */
1850 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_fdir_del);
1852 /* VIRTCHNL_OP_GET_QOS_CAPS
1853 * VF sends this message to get its QoS Caps, such as
1854 * TC number, Arbiter and Bandwidth.
1856 struct virtchnl_qos_cap_elem {
1859 #define VIRTCHNL_ABITER_STRICT 0
1860 #define VIRTCHNL_ABITER_ETS 2
1862 #define VIRTCHNL_STRICT_WEIGHT 1
1864 enum virtchnl_bw_limit_type type;
1866 struct virtchnl_shaper_bw shaper;
1871 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_qos_cap_elem);
1873 struct virtchnl_qos_cap_list {
1876 struct virtchnl_qos_cap_elem cap[1];
1879 VIRTCHNL_CHECK_STRUCT_LEN(44, virtchnl_qos_cap_list);
1881 /* VIRTCHNL_OP_CONFIG_QUEUE_TC_MAP
1882 * VF sends message virtchnl_queue_tc_mapping to set queue to tc
1883 * mapping for all the Tx and Rx queues with a specified VSI, and
1884 * would get response about bitmap of valid user priorities
1885 * associated with queues.
1887 struct virtchnl_queue_tc_mapping {
1890 u16 num_queue_pairs;
1898 #define VIRTCHNL_USER_PRIO_TYPE_UP 0
1899 #define VIRTCHNL_USER_PRIO_TYPE_DSCP 1
1901 u16 valid_prio_bitmap;
1906 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_tc_mapping);
1908 /* VIRTCHNL_OP_CONFIG_QUEUE_BW */
1909 struct virtchnl_queue_bw {
1913 struct virtchnl_shaper_bw shaper;
1916 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_bw);
1918 struct virtchnl_queues_bw_cfg {
1921 struct virtchnl_queue_bw cfg[1];
1924 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_queues_bw_cfg);
1926 /* TX and RX queue types are valid in legacy as well as split queue models.
1927 * With Split Queue model, 2 additional types are introduced - TX_COMPLETION
1928 * and RX_BUFFER. In split queue model, RX corresponds to the queue where HW
1929 * posts completions.
1931 enum virtchnl_queue_type {
1932 VIRTCHNL_QUEUE_TYPE_TX = 0,
1933 VIRTCHNL_QUEUE_TYPE_RX = 1,
1934 VIRTCHNL_QUEUE_TYPE_TX_COMPLETION = 2,
1935 VIRTCHNL_QUEUE_TYPE_RX_BUFFER = 3,
1936 VIRTCHNL_QUEUE_TYPE_CONFIG_TX = 4,
1937 VIRTCHNL_QUEUE_TYPE_CONFIG_RX = 5
1941 /* structure to specify a chunk of contiguous queues */
1942 struct virtchnl_queue_chunk {
1943 /* see enum virtchnl_queue_type */
1949 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_queue_chunk);
1951 /* structure to specify several chunks of contiguous queues */
1952 struct virtchnl_queue_chunks {
1955 struct virtchnl_queue_chunk chunks[1];
1958 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_chunks);
1961 /* VIRTCHNL_OP_ENABLE_QUEUES_V2
1962 * VIRTCHNL_OP_DISABLE_QUEUES_V2
1963 * VIRTCHNL_OP_DEL_QUEUES
1965 * If VIRTCHNL_CAP_EXT_FEATURES was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
1966 * then all of these ops are available.
1968 * If VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
1969 * then VIRTCHNL_OP_ENABLE_QUEUES_V2 and VIRTCHNL_OP_DISABLE_QUEUES_V2 are
1972 * PF sends these messages to enable, disable or delete queues specified in
1973 * chunks. PF sends virtchnl_del_ena_dis_queues struct to specify the queues
1974 * to be enabled/disabled/deleted. Also applicable to single queue RX or
1975 * TX. CP performs requested action and returns status.
1977 struct virtchnl_del_ena_dis_queues {
1980 struct virtchnl_queue_chunks chunks;
1983 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_del_ena_dis_queues);
1985 /* Virtchannel interrupt throttling rate index */
1986 enum virtchnl_itr_idx {
1987 VIRTCHNL_ITR_IDX_0 = 0,
1988 VIRTCHNL_ITR_IDX_1 = 1,
1989 VIRTCHNL_ITR_IDX_NO_ITR = 3,
1992 /* Queue to vector mapping */
1993 struct virtchnl_queue_vector {
1998 /* see enum virtchnl_itr_idx */
2001 /* see enum virtchnl_queue_type */
2005 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_queue_vector);
2007 /* VIRTCHNL_OP_MAP_QUEUE_VECTOR
2008 * VIRTCHNL_OP_UNMAP_QUEUE_VECTOR
2010 * If VIRTCHNL_CAP_EXT_FEATURES was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
2011 * then all of these ops are available.
2013 * If VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
2014 * then only VIRTCHNL_OP_MAP_QUEUE_VECTOR is available.
2016 * PF sends this message to map or unmap queues to vectors and ITR index
2017 * registers. External data buffer contains virtchnl_queue_vector_maps structure
2018 * that contains num_qv_maps of virtchnl_queue_vector structures.
2019 * CP maps the requested queue vector maps after validating the queue and vector
2020 * ids and returns a status code.
2022 struct virtchnl_queue_vector_maps {
2026 struct virtchnl_queue_vector qv_maps[1];
2029 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_queue_vector_maps);
2031 struct virtchnl_quanta_cfg {
2033 struct virtchnl_queue_chunk queue_select;
2036 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_quanta_cfg);
2038 #define VIRTCHNL_1588_PTP_CAP_RX_TSTAMP BIT(1)
2039 #define VIRTCHNL_1588_PTP_CAP_READ_PHC BIT(2)
2041 struct virtchnl_phc_regs {
2048 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_phc_regs);
2050 struct virtchnl_ptp_caps {
2051 struct virtchnl_phc_regs phc_regs;
2058 u8 tx_tstamp_format;
2062 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_ptp_caps);
2064 struct virtchnl_phc_time {
2069 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_phc_time);
2071 /* Since VF messages are limited by u16 size, precalculate the maximum possible
2072 * values of nested elements in virtchnl structures that virtual channel can
2073 * possibly handle in a single message.
2075 enum virtchnl_vector_limits {
2076 VIRTCHNL_OP_CONFIG_VSI_QUEUES_MAX =
2077 ((u16)(~0) - sizeof(struct virtchnl_vsi_queue_config_info)) /
2078 sizeof(struct virtchnl_queue_pair_info),
2080 VIRTCHNL_OP_CONFIG_IRQ_MAP_MAX =
2081 ((u16)(~0) - sizeof(struct virtchnl_irq_map_info)) /
2082 sizeof(struct virtchnl_vector_map),
2084 VIRTCHNL_OP_ADD_DEL_ETH_ADDR_MAX =
2085 ((u16)(~0) - sizeof(struct virtchnl_ether_addr_list)) /
2086 sizeof(struct virtchnl_ether_addr),
2088 VIRTCHNL_OP_ADD_DEL_VLAN_MAX =
2089 ((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list)) /
2093 VIRTCHNL_OP_ENABLE_CHANNELS_MAX =
2094 ((u16)(~0) - sizeof(struct virtchnl_tc_info)) /
2095 sizeof(struct virtchnl_channel_info),
2097 VIRTCHNL_OP_ENABLE_DISABLE_DEL_QUEUES_V2_MAX =
2098 ((u16)(~0) - sizeof(struct virtchnl_del_ena_dis_queues)) /
2099 sizeof(struct virtchnl_queue_chunk),
2101 VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX =
2102 ((u16)(~0) - sizeof(struct virtchnl_queue_vector_maps)) /
2103 sizeof(struct virtchnl_queue_vector),
2105 VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX =
2106 ((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list_v2)) /
2107 sizeof(struct virtchnl_vlan_filter),
2111 * virtchnl_vc_validate_vf_msg
2112 * @ver: Virtchnl version info
2113 * @v_opcode: Opcode for the message
2114 * @msg: pointer to the msg buffer
2115 * @msglen: msg length
2117 * validate msg format against struct for each opcode
2120 virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
2121 u8 *msg, u16 msglen)
2123 bool err_msg_format = false;
2126 /* Validate message length. */
2128 case VIRTCHNL_OP_VERSION:
2129 valid_len = sizeof(struct virtchnl_version_info);
2131 case VIRTCHNL_OP_RESET_VF:
2133 case VIRTCHNL_OP_GET_VF_RESOURCES:
2135 valid_len = sizeof(u32);
2137 case VIRTCHNL_OP_CONFIG_TX_QUEUE:
2138 valid_len = sizeof(struct virtchnl_txq_info);
2140 case VIRTCHNL_OP_CONFIG_RX_QUEUE:
2141 valid_len = sizeof(struct virtchnl_rxq_info);
2143 case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
2144 valid_len = sizeof(struct virtchnl_vsi_queue_config_info);
2145 if (msglen >= valid_len) {
2146 struct virtchnl_vsi_queue_config_info *vqc =
2147 (struct virtchnl_vsi_queue_config_info *)msg;
2149 if (vqc->num_queue_pairs == 0 || vqc->num_queue_pairs >
2150 VIRTCHNL_OP_CONFIG_VSI_QUEUES_MAX) {
2151 err_msg_format = true;
2155 valid_len += (vqc->num_queue_pairs *
2157 virtchnl_queue_pair_info));
2160 case VIRTCHNL_OP_CONFIG_IRQ_MAP:
2161 valid_len = sizeof(struct virtchnl_irq_map_info);
2162 if (msglen >= valid_len) {
2163 struct virtchnl_irq_map_info *vimi =
2164 (struct virtchnl_irq_map_info *)msg;
2166 if (vimi->num_vectors == 0 || vimi->num_vectors >
2167 VIRTCHNL_OP_CONFIG_IRQ_MAP_MAX) {
2168 err_msg_format = true;
2172 valid_len += (vimi->num_vectors *
2173 sizeof(struct virtchnl_vector_map));
2176 case VIRTCHNL_OP_ENABLE_QUEUES:
2177 case VIRTCHNL_OP_DISABLE_QUEUES:
2178 valid_len = sizeof(struct virtchnl_queue_select);
2180 case VIRTCHNL_OP_GET_MAX_RSS_QREGION:
2182 case VIRTCHNL_OP_ADD_ETH_ADDR:
2183 case VIRTCHNL_OP_DEL_ETH_ADDR:
2184 valid_len = sizeof(struct virtchnl_ether_addr_list);
2185 if (msglen >= valid_len) {
2186 struct virtchnl_ether_addr_list *veal =
2187 (struct virtchnl_ether_addr_list *)msg;
2189 if (veal->num_elements == 0 || veal->num_elements >
2190 VIRTCHNL_OP_ADD_DEL_ETH_ADDR_MAX) {
2191 err_msg_format = true;
2195 valid_len += veal->num_elements *
2196 sizeof(struct virtchnl_ether_addr);
2199 case VIRTCHNL_OP_ADD_VLAN:
2200 case VIRTCHNL_OP_DEL_VLAN:
2201 valid_len = sizeof(struct virtchnl_vlan_filter_list);
2202 if (msglen >= valid_len) {
2203 struct virtchnl_vlan_filter_list *vfl =
2204 (struct virtchnl_vlan_filter_list *)msg;
2206 if (vfl->num_elements == 0 || vfl->num_elements >
2207 VIRTCHNL_OP_ADD_DEL_VLAN_MAX) {
2208 err_msg_format = true;
2212 valid_len += vfl->num_elements * sizeof(u16);
2215 case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
2216 valid_len = sizeof(struct virtchnl_promisc_info);
2218 case VIRTCHNL_OP_GET_STATS:
2219 valid_len = sizeof(struct virtchnl_queue_select);
2221 case VIRTCHNL_OP_CONFIG_RSS_KEY:
2222 valid_len = sizeof(struct virtchnl_rss_key);
2223 if (msglen >= valid_len) {
2224 struct virtchnl_rss_key *vrk =
2225 (struct virtchnl_rss_key *)msg;
2227 if (vrk->key_len == 0) {
2228 /* zero length is allowed as input */
2232 valid_len += vrk->key_len - 1;
2235 case VIRTCHNL_OP_CONFIG_RSS_LUT:
2236 valid_len = sizeof(struct virtchnl_rss_lut);
2237 if (msglen >= valid_len) {
2238 struct virtchnl_rss_lut *vrl =
2239 (struct virtchnl_rss_lut *)msg;
2241 if (vrl->lut_entries == 0) {
2242 /* zero entries is allowed as input */
2246 valid_len += vrl->lut_entries - 1;
2249 case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
2251 case VIRTCHNL_OP_SET_RSS_HENA:
2252 valid_len = sizeof(struct virtchnl_rss_hena);
2254 case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
2255 case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
2257 case VIRTCHNL_OP_REQUEST_QUEUES:
2258 valid_len = sizeof(struct virtchnl_vf_res_request);
2260 case VIRTCHNL_OP_ENABLE_CHANNELS:
2261 valid_len = sizeof(struct virtchnl_tc_info);
2262 if (msglen >= valid_len) {
2263 struct virtchnl_tc_info *vti =
2264 (struct virtchnl_tc_info *)msg;
2266 if (vti->num_tc == 0 || vti->num_tc >
2267 VIRTCHNL_OP_ENABLE_CHANNELS_MAX) {
2268 err_msg_format = true;
2272 valid_len += (vti->num_tc - 1) *
2273 sizeof(struct virtchnl_channel_info);
2276 case VIRTCHNL_OP_DISABLE_CHANNELS:
2278 case VIRTCHNL_OP_ADD_CLOUD_FILTER:
2279 case VIRTCHNL_OP_DEL_CLOUD_FILTER:
2280 valid_len = sizeof(struct virtchnl_filter);
2282 case VIRTCHNL_OP_DCF_VLAN_OFFLOAD:
2283 valid_len = sizeof(struct virtchnl_dcf_vlan_offload);
2285 case VIRTCHNL_OP_DCF_CMD_DESC:
2286 case VIRTCHNL_OP_DCF_CMD_BUFF:
2287 /* These two opcodes are specific to handle the AdminQ command,
2288 * so the validation needs to be done in PF's context.
2292 case VIRTCHNL_OP_DCF_DISABLE:
2293 case VIRTCHNL_OP_DCF_GET_VSI_MAP:
2294 case VIRTCHNL_OP_DCF_GET_PKG_INFO:
2296 case VIRTCHNL_OP_DCF_CONFIG_BW:
2297 valid_len = sizeof(struct virtchnl_dcf_bw_cfg_list);
2298 if (msglen >= valid_len) {
2299 struct virtchnl_dcf_bw_cfg_list *cfg_list =
2300 (struct virtchnl_dcf_bw_cfg_list *)msg;
2301 if (cfg_list->num_elem == 0) {
2302 err_msg_format = true;
2305 valid_len += (cfg_list->num_elem - 1) *
2306 sizeof(struct virtchnl_dcf_bw_cfg);
2309 case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
2311 case VIRTCHNL_OP_ADD_RSS_CFG:
2312 case VIRTCHNL_OP_DEL_RSS_CFG:
2313 valid_len = sizeof(struct virtchnl_rss_cfg);
2315 case VIRTCHNL_OP_ADD_FDIR_FILTER:
2316 valid_len = sizeof(struct virtchnl_fdir_add);
2318 case VIRTCHNL_OP_DEL_FDIR_FILTER:
2319 valid_len = sizeof(struct virtchnl_fdir_del);
2321 case VIRTCHNL_OP_GET_QOS_CAPS:
2323 case VIRTCHNL_OP_CONFIG_QUEUE_TC_MAP:
2324 valid_len = sizeof(struct virtchnl_queue_tc_mapping);
2325 if (msglen >= valid_len) {
2326 struct virtchnl_queue_tc_mapping *q_tc =
2327 (struct virtchnl_queue_tc_mapping *)msg;
2328 if (q_tc->num_tc == 0) {
2329 err_msg_format = true;
2332 valid_len += (q_tc->num_tc - 1) *
2333 sizeof(q_tc->tc[0]);
2336 case VIRTCHNL_OP_CONFIG_QUEUE_BW:
2337 valid_len = sizeof(struct virtchnl_queues_bw_cfg);
2338 if (msglen >= valid_len) {
2339 struct virtchnl_queues_bw_cfg *q_bw =
2340 (struct virtchnl_queues_bw_cfg *)msg;
2341 if (q_bw->num_queues == 0) {
2342 err_msg_format = true;
2345 valid_len += (q_bw->num_queues - 1) *
2346 sizeof(q_bw->cfg[0]);
2349 case VIRTCHNL_OP_CONFIG_QUANTA:
2350 valid_len = sizeof(struct virtchnl_quanta_cfg);
2351 if (msglen >= valid_len) {
2352 struct virtchnl_quanta_cfg *q_quanta =
2353 (struct virtchnl_quanta_cfg *)msg;
2354 if (q_quanta->quanta_size == 0 ||
2355 q_quanta->queue_select.num_queues == 0) {
2356 err_msg_format = true;
2361 case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
2363 case VIRTCHNL_OP_ADD_VLAN_V2:
2364 case VIRTCHNL_OP_DEL_VLAN_V2:
2365 valid_len = sizeof(struct virtchnl_vlan_filter_list_v2);
2366 if (msglen >= valid_len) {
2367 struct virtchnl_vlan_filter_list_v2 *vfl =
2368 (struct virtchnl_vlan_filter_list_v2 *)msg;
2370 if (vfl->num_elements == 0 || vfl->num_elements >
2371 VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX) {
2372 err_msg_format = true;
2376 valid_len += (vfl->num_elements - 1) *
2377 sizeof(struct virtchnl_vlan_filter);
2380 case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
2381 case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
2382 case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
2383 case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
2384 case VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2:
2385 case VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2:
2386 valid_len = sizeof(struct virtchnl_vlan_setting);
2388 case VIRTCHNL_OP_1588_PTP_GET_CAPS:
2389 valid_len = sizeof(struct virtchnl_ptp_caps);
2391 case VIRTCHNL_OP_1588_PTP_GET_TIME:
2392 valid_len = sizeof(struct virtchnl_phc_time);
2394 case VIRTCHNL_OP_ENABLE_QUEUES_V2:
2395 case VIRTCHNL_OP_DISABLE_QUEUES_V2:
2396 valid_len = sizeof(struct virtchnl_del_ena_dis_queues);
2397 if (msglen >= valid_len) {
2398 struct virtchnl_del_ena_dis_queues *qs =
2399 (struct virtchnl_del_ena_dis_queues *)msg;
2400 if (qs->chunks.num_chunks == 0 ||
2401 qs->chunks.num_chunks > VIRTCHNL_OP_ENABLE_DISABLE_DEL_QUEUES_V2_MAX) {
2402 err_msg_format = true;
2405 valid_len += (qs->chunks.num_chunks - 1) *
2406 sizeof(struct virtchnl_queue_chunk);
2409 case VIRTCHNL_OP_MAP_QUEUE_VECTOR:
2410 valid_len = sizeof(struct virtchnl_queue_vector_maps);
2411 if (msglen >= valid_len) {
2412 struct virtchnl_queue_vector_maps *v_qp =
2413 (struct virtchnl_queue_vector_maps *)msg;
2414 if (v_qp->num_qv_maps == 0 ||
2415 v_qp->num_qv_maps > VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX) {
2416 err_msg_format = true;
2419 valid_len += (v_qp->num_qv_maps - 1) *
2420 sizeof(struct virtchnl_queue_vector);
2424 case VIRTCHNL_OP_INLINE_IPSEC_CRYPTO:
2426 struct inline_ipsec_msg *iim = (struct inline_ipsec_msg *)msg;
2428 virtchnl_inline_ipsec_val_msg_len(iim->ipsec_opcode);
2431 /* These are always errors coming from the VF. */
2432 case VIRTCHNL_OP_EVENT:
2433 case VIRTCHNL_OP_UNKNOWN:
2435 return VIRTCHNL_STATUS_ERR_PARAM;
2437 /* few more checks */
2438 if (err_msg_format || valid_len != msglen)
2439 return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH;
2443 #endif /* _VIRTCHNL_H_ */