1 // SPDX-License-Identifier: BSD-3-Clause
2 /* Copyright 2018 Mellanox Technologies, Ltd */
7 #include <rte_malloc.h>
8 #include <rte_eal_paging.h>
11 #include "mlx5_devx_cmds.h"
12 #include "mlx5_common_utils.h"
13 #include "mlx5_malloc.h"
17 * Perform read access to the registers. Reads data from register
18 * and writes ones to the specified buffer.
21 * Context returned from mlx5 open_device() glue function.
23 * Register identifier according to the PRM.
25 * Register access auxiliary parameter according to the PRM.
27 * Pointer to the buffer to store read data.
29 * Buffer size in double words.
32 * 0 on success, a negative value otherwise.
35 mlx5_devx_cmd_register_read(void *ctx, uint16_t reg_id, uint32_t arg,
36 uint32_t *data, uint32_t dw_cnt)
38 uint32_t in[MLX5_ST_SZ_DW(access_register_in)] = {0};
39 uint32_t out[MLX5_ST_SZ_DW(access_register_out) +
40 MLX5_ACCESS_REGISTER_DATA_DWORD_MAX] = {0};
43 MLX5_ASSERT(data && dw_cnt);
44 MLX5_ASSERT(dw_cnt <= MLX5_ACCESS_REGISTER_DATA_DWORD_MAX);
45 if (dw_cnt > MLX5_ACCESS_REGISTER_DATA_DWORD_MAX) {
46 DRV_LOG(ERR, "Not enough buffer for register read data");
49 MLX5_SET(access_register_in, in, opcode,
50 MLX5_CMD_OP_ACCESS_REGISTER_USER);
51 MLX5_SET(access_register_in, in, op_mod,
52 MLX5_ACCESS_REGISTER_IN_OP_MOD_READ);
53 MLX5_SET(access_register_in, in, register_id, reg_id);
54 MLX5_SET(access_register_in, in, argument, arg);
55 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out,
56 MLX5_ST_SZ_DW(access_register_out) *
57 sizeof(uint32_t) + dw_cnt);
60 status = MLX5_GET(access_register_out, out, status);
62 int syndrome = MLX5_GET(access_register_out, out, syndrome);
64 DRV_LOG(DEBUG, "Failed to access NIC register 0x%X, "
65 "status %x, syndrome = %x",
66 reg_id, status, syndrome);
69 memcpy(data, &out[MLX5_ST_SZ_DW(access_register_out)],
70 dw_cnt * sizeof(uint32_t));
73 rc = (rc > 0) ? -rc : rc;
78 * Allocate flow counters via devx interface.
81 * Context returned from mlx5 open_device() glue function.
83 * Pointer to counters properties structure to be filled by the routine.
85 * Bulk counter numbers in 128 counters units.
88 * Pointer to counter object on success, a negative value otherwise and
91 struct mlx5_devx_obj *
92 mlx5_devx_cmd_flow_counter_alloc(void *ctx, uint32_t bulk_n_128)
94 struct mlx5_devx_obj *dcs = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*dcs),
96 uint32_t in[MLX5_ST_SZ_DW(alloc_flow_counter_in)] = {0};
97 uint32_t out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {0};
103 MLX5_SET(alloc_flow_counter_in, in, opcode,
104 MLX5_CMD_OP_ALLOC_FLOW_COUNTER);
105 MLX5_SET(alloc_flow_counter_in, in, flow_counter_bulk, bulk_n_128);
106 dcs->obj = mlx5_glue->devx_obj_create(ctx, in,
107 sizeof(in), out, sizeof(out));
109 DRV_LOG(ERR, "Can't allocate counters - error %d", errno);
114 dcs->id = MLX5_GET(alloc_flow_counter_out, out, flow_counter_id);
119 * Query flow counters values.
122 * devx object that was obtained from mlx5_devx_cmd_fc_alloc.
124 * Whether hardware should clear the counters after the query or not.
125 * @param[in] n_counters
126 * 0 in case of 1 counter to read, otherwise the counter number to read.
128 * The number of packets that matched the flow.
130 * The number of bytes that matched the flow.
132 * The mkey key for batch query.
134 * The address in the mkey range for batch query.
136 * The completion object for asynchronous batch query.
138 * The ID to be returned in the asynchronous batch query response.
141 * 0 on success, a negative value otherwise.
144 mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs,
145 int clear, uint32_t n_counters,
146 uint64_t *pkts, uint64_t *bytes,
147 uint32_t mkey, void *addr,
151 int out_len = MLX5_ST_SZ_BYTES(query_flow_counter_out) +
152 MLX5_ST_SZ_BYTES(traffic_counter);
153 uint32_t out[out_len];
154 uint32_t in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0};
158 MLX5_SET(query_flow_counter_in, in, opcode,
159 MLX5_CMD_OP_QUERY_FLOW_COUNTER);
160 MLX5_SET(query_flow_counter_in, in, op_mod, 0);
161 MLX5_SET(query_flow_counter_in, in, flow_counter_id, dcs->id);
162 MLX5_SET(query_flow_counter_in, in, clear, !!clear);
165 MLX5_SET(query_flow_counter_in, in, num_of_counters,
167 MLX5_SET(query_flow_counter_in, in, dump_to_memory, 1);
168 MLX5_SET(query_flow_counter_in, in, mkey, mkey);
169 MLX5_SET64(query_flow_counter_in, in, address,
170 (uint64_t)(uintptr_t)addr);
173 rc = mlx5_glue->devx_obj_query(dcs->obj, in, sizeof(in), out,
176 rc = mlx5_glue->devx_obj_query_async(dcs->obj, in, sizeof(in),
180 DRV_LOG(ERR, "Failed to query devx counters with rc %d", rc);
185 stats = MLX5_ADDR_OF(query_flow_counter_out,
186 out, flow_statistics);
187 *pkts = MLX5_GET64(traffic_counter, stats, packets);
188 *bytes = MLX5_GET64(traffic_counter, stats, octets);
197 * Context returned from mlx5 open_device() glue function.
199 * Attributes of the requested mkey.
202 * Pointer to Devx mkey on success, a negative value otherwise and rte_errno
205 struct mlx5_devx_obj *
206 mlx5_devx_cmd_mkey_create(void *ctx,
207 struct mlx5_devx_mkey_attr *attr)
209 struct mlx5_klm *klm_array = attr->klm_array;
210 int klm_num = attr->klm_num;
211 int in_size_dw = MLX5_ST_SZ_DW(create_mkey_in) +
212 (klm_num ? RTE_ALIGN(klm_num, 4) : 0) * MLX5_ST_SZ_DW(klm);
213 uint32_t in[in_size_dw];
214 uint32_t out[MLX5_ST_SZ_DW(create_mkey_out)] = {0};
216 struct mlx5_devx_obj *mkey = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*mkey),
219 uint32_t translation_size;
225 memset(in, 0, in_size_dw * 4);
226 pgsize = rte_mem_page_size();
227 if (pgsize == (size_t)-1) {
229 DRV_LOG(ERR, "Failed to get page size");
233 MLX5_SET(create_mkey_in, in, opcode, MLX5_CMD_OP_CREATE_MKEY);
234 mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
237 uint8_t *klm = (uint8_t *)MLX5_ADDR_OF(create_mkey_in, in,
239 translation_size = RTE_ALIGN(klm_num, 4);
240 for (i = 0; i < klm_num; i++) {
241 MLX5_SET(klm, klm, byte_count, klm_array[i].byte_count);
242 MLX5_SET(klm, klm, mkey, klm_array[i].mkey);
243 MLX5_SET64(klm, klm, address, klm_array[i].address);
244 klm += MLX5_ST_SZ_BYTES(klm);
246 for (; i < (int)translation_size; i++) {
247 MLX5_SET(klm, klm, mkey, 0x0);
248 MLX5_SET64(klm, klm, address, 0x0);
249 klm += MLX5_ST_SZ_BYTES(klm);
251 MLX5_SET(mkc, mkc, access_mode_1_0, attr->log_entity_size ?
252 MLX5_MKC_ACCESS_MODE_KLM_FBS :
253 MLX5_MKC_ACCESS_MODE_KLM);
254 MLX5_SET(mkc, mkc, log_page_size, attr->log_entity_size);
256 translation_size = (RTE_ALIGN(attr->size, pgsize) * 8) / 16;
257 MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
258 MLX5_SET(mkc, mkc, log_page_size, rte_log2_u32(pgsize));
260 MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
262 MLX5_SET(create_mkey_in, in, mkey_umem_id, attr->umem_id);
263 MLX5_SET(create_mkey_in, in, pg_access, attr->pg_access);
264 MLX5_SET(mkc, mkc, lw, 0x1);
265 MLX5_SET(mkc, mkc, lr, 0x1);
266 MLX5_SET(mkc, mkc, qpn, 0xffffff);
267 MLX5_SET(mkc, mkc, pd, attr->pd);
268 MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF);
269 MLX5_SET(mkc, mkc, translations_octword_size, translation_size);
270 MLX5_SET(mkc, mkc, relaxed_ordering_write,
271 attr->relaxed_ordering_write);
272 MLX5_SET(mkc, mkc, relaxed_ordering_read, attr->relaxed_ordering_read);
273 MLX5_SET64(mkc, mkc, start_addr, attr->addr);
274 MLX5_SET64(mkc, mkc, len, attr->size);
275 mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4, out,
278 DRV_LOG(ERR, "Can't create %sdirect mkey - error %d\n",
279 klm_num ? "an in" : "a ", errno);
284 mkey->id = MLX5_GET(create_mkey_out, out, mkey_index);
285 mkey->id = (mkey->id << 8) | (attr->umem_id & 0xFF);
290 * Get status of devx command response.
291 * Mainly used for asynchronous commands.
294 * The out response buffer.
297 * 0 on success, non-zero value otherwise.
300 mlx5_devx_get_out_command_status(void *out)
306 status = MLX5_GET(query_flow_counter_out, out, status);
308 int syndrome = MLX5_GET(query_flow_counter_out, out, syndrome);
310 DRV_LOG(ERR, "Bad DevX status %x, syndrome = %x", status,
317 * Destroy any object allocated by a Devx API.
320 * Pointer to a general object.
323 * 0 on success, a negative value otherwise.
326 mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj)
332 ret = mlx5_glue->devx_obj_destroy(obj->obj);
338 * Query NIC vport context.
339 * Fills minimal inline attribute.
342 * ibv contexts returned from mlx5dv_open_device.
346 * Attributes device values.
349 * 0 on success, a negative value otherwise.
352 mlx5_devx_cmd_query_nic_vport_context(void *ctx,
354 struct mlx5_hca_attr *attr)
356 uint32_t in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0};
357 uint32_t out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {0};
359 int status, syndrome, rc;
361 /* Query NIC vport context to determine inline mode. */
362 MLX5_SET(query_nic_vport_context_in, in, opcode,
363 MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
364 MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);
366 MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);
367 rc = mlx5_glue->devx_general_cmd(ctx,
372 status = MLX5_GET(query_nic_vport_context_out, out, status);
373 syndrome = MLX5_GET(query_nic_vport_context_out, out, syndrome);
375 DRV_LOG(DEBUG, "Failed to query NIC vport context, "
376 "status %x, syndrome = %x", status, syndrome);
379 vctx = MLX5_ADDR_OF(query_nic_vport_context_out, out,
381 attr->vport_inline_mode = MLX5_GET(nic_vport_context, vctx,
382 min_wqe_inline_mode);
385 rc = (rc > 0) ? -rc : rc;
390 * Query NIC vDPA attributes.
393 * Context returned from mlx5 open_device() glue function.
394 * @param[out] vdpa_attr
395 * vDPA Attributes structure to fill.
398 mlx5_devx_cmd_query_hca_vdpa_attr(void *ctx,
399 struct mlx5_hca_vdpa_attr *vdpa_attr)
401 uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
402 uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
403 void *hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
404 int status, syndrome, rc;
406 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
407 MLX5_SET(query_hca_cap_in, in, op_mod,
408 MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION |
409 MLX5_HCA_CAP_OPMOD_GET_CUR);
410 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
411 status = MLX5_GET(query_hca_cap_out, out, status);
412 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
414 RTE_LOG(DEBUG, PMD, "Failed to query devx VDPA capabilities,"
415 " status %x, syndrome = %x", status, syndrome);
416 vdpa_attr->valid = 0;
418 vdpa_attr->valid = 1;
419 vdpa_attr->desc_tunnel_offload_type =
420 MLX5_GET(virtio_emulation_cap, hcattr,
421 desc_tunnel_offload_type);
422 vdpa_attr->eth_frame_offload_type =
423 MLX5_GET(virtio_emulation_cap, hcattr,
424 eth_frame_offload_type);
425 vdpa_attr->virtio_version_1_0 =
426 MLX5_GET(virtio_emulation_cap, hcattr,
428 vdpa_attr->tso_ipv4 = MLX5_GET(virtio_emulation_cap, hcattr,
430 vdpa_attr->tso_ipv6 = MLX5_GET(virtio_emulation_cap, hcattr,
432 vdpa_attr->tx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
434 vdpa_attr->rx_csum = MLX5_GET(virtio_emulation_cap, hcattr,
436 vdpa_attr->event_mode = MLX5_GET(virtio_emulation_cap, hcattr,
438 vdpa_attr->virtio_queue_type =
439 MLX5_GET(virtio_emulation_cap, hcattr,
441 vdpa_attr->log_doorbell_stride =
442 MLX5_GET(virtio_emulation_cap, hcattr,
443 log_doorbell_stride);
444 vdpa_attr->log_doorbell_bar_size =
445 MLX5_GET(virtio_emulation_cap, hcattr,
446 log_doorbell_bar_size);
447 vdpa_attr->doorbell_bar_offset =
448 MLX5_GET64(virtio_emulation_cap, hcattr,
449 doorbell_bar_offset);
450 vdpa_attr->max_num_virtio_queues =
451 MLX5_GET(virtio_emulation_cap, hcattr,
452 max_num_virtio_queues);
453 vdpa_attr->umems[0].a = MLX5_GET(virtio_emulation_cap, hcattr,
454 umem_1_buffer_param_a);
455 vdpa_attr->umems[0].b = MLX5_GET(virtio_emulation_cap, hcattr,
456 umem_1_buffer_param_b);
457 vdpa_attr->umems[1].a = MLX5_GET(virtio_emulation_cap, hcattr,
458 umem_2_buffer_param_a);
459 vdpa_attr->umems[1].b = MLX5_GET(virtio_emulation_cap, hcattr,
460 umem_2_buffer_param_b);
461 vdpa_attr->umems[2].a = MLX5_GET(virtio_emulation_cap, hcattr,
462 umem_3_buffer_param_a);
463 vdpa_attr->umems[2].b = MLX5_GET(virtio_emulation_cap, hcattr,
464 umem_3_buffer_param_b);
469 mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj,
470 uint32_t ids[], uint32_t num)
472 uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
473 uint32_t out[MLX5_ST_SZ_DW(create_flex_parser_out)] = {0};
474 void *hdr = MLX5_ADDR_OF(create_flex_parser_out, in, hdr);
475 void *flex = MLX5_ADDR_OF(create_flex_parser_out, out, flex);
476 void *sample = MLX5_ADDR_OF(parse_graph_flex, flex, sample_table);
481 if (num > MLX5_GRAPH_NODE_SAMPLE_NUM) {
483 DRV_LOG(ERR, "Too many sample IDs to be fetched.");
486 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
487 MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
488 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
489 MLX5_GENERAL_OBJ_TYPE_FLEX_PARSE_GRAPH);
490 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, flex_obj->id);
491 ret = mlx5_glue->devx_obj_query(flex_obj->obj, in, sizeof(in),
495 DRV_LOG(ERR, "Failed to query sample IDs with object %p.",
499 for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) {
500 void *s_off = (void *)((char *)sample + i *
501 MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample));
504 en = MLX5_GET(parse_graph_flow_match_sample, s_off,
505 flow_match_sample_en);
508 ids[idx++] = MLX5_GET(parse_graph_flow_match_sample, s_off,
509 flow_match_sample_field_id);
513 DRV_LOG(ERR, "Number of sample IDs are not as expected.");
520 struct mlx5_devx_obj *
521 mlx5_devx_cmd_create_flex_parser(void *ctx,
522 struct mlx5_devx_graph_node_attr *data)
524 uint32_t in[MLX5_ST_SZ_DW(create_flex_parser_in)] = {0};
525 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
526 void *hdr = MLX5_ADDR_OF(create_flex_parser_in, in, hdr);
527 void *flex = MLX5_ADDR_OF(create_flex_parser_in, in, flex);
528 void *sample = MLX5_ADDR_OF(parse_graph_flex, flex, sample_table);
529 void *in_arc = MLX5_ADDR_OF(parse_graph_flex, flex, input_arc);
530 void *out_arc = MLX5_ADDR_OF(parse_graph_flex, flex, output_arc);
531 struct mlx5_devx_obj *parse_flex_obj = mlx5_malloc
532 (MLX5_MEM_ZERO, sizeof(*parse_flex_obj), 0, SOCKET_ID_ANY);
535 if (!parse_flex_obj) {
536 DRV_LOG(ERR, "Failed to allocate flex parser data.");
540 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
541 MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
542 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
543 MLX5_GENERAL_OBJ_TYPE_FLEX_PARSE_GRAPH);
544 MLX5_SET(parse_graph_flex, flex, header_length_mode,
545 data->header_length_mode);
546 MLX5_SET(parse_graph_flex, flex, header_length_base_value,
547 data->header_length_base_value);
548 MLX5_SET(parse_graph_flex, flex, header_length_field_offset,
549 data->header_length_field_offset);
550 MLX5_SET(parse_graph_flex, flex, header_length_field_shift,
551 data->header_length_field_shift);
552 MLX5_SET(parse_graph_flex, flex, header_length_field_mask,
553 data->header_length_field_mask);
554 for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) {
555 struct mlx5_devx_match_sample_attr *s = &data->sample[i];
556 void *s_off = (void *)((char *)sample + i *
557 MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample));
559 if (!s->flow_match_sample_en)
561 MLX5_SET(parse_graph_flow_match_sample, s_off,
562 flow_match_sample_en, !!s->flow_match_sample_en);
563 MLX5_SET(parse_graph_flow_match_sample, s_off,
564 flow_match_sample_field_offset,
565 s->flow_match_sample_field_offset);
566 MLX5_SET(parse_graph_flow_match_sample, s_off,
567 flow_match_sample_offset_mode,
568 s->flow_match_sample_offset_mode);
569 MLX5_SET(parse_graph_flow_match_sample, s_off,
570 flow_match_sample_field_offset_mask,
571 s->flow_match_sample_field_offset_mask);
572 MLX5_SET(parse_graph_flow_match_sample, s_off,
573 flow_match_sample_field_offset_shift,
574 s->flow_match_sample_field_offset_shift);
575 MLX5_SET(parse_graph_flow_match_sample, s_off,
576 flow_match_sample_field_base_offset,
577 s->flow_match_sample_field_base_offset);
578 MLX5_SET(parse_graph_flow_match_sample, s_off,
579 flow_match_sample_tunnel_mode,
580 s->flow_match_sample_tunnel_mode);
582 for (i = 0; i < MLX5_GRAPH_NODE_ARC_NUM; i++) {
583 struct mlx5_devx_graph_arc_attr *ia = &data->in[i];
584 struct mlx5_devx_graph_arc_attr *oa = &data->out[i];
585 void *in_off = (void *)((char *)in_arc + i *
586 MLX5_ST_SZ_BYTES(parse_graph_arc));
587 void *out_off = (void *)((char *)out_arc + i *
588 MLX5_ST_SZ_BYTES(parse_graph_arc));
590 if (ia->arc_parse_graph_node != 0) {
591 MLX5_SET(parse_graph_arc, in_off,
592 compare_condition_value,
593 ia->compare_condition_value);
594 MLX5_SET(parse_graph_arc, in_off, start_inner_tunnel,
595 ia->start_inner_tunnel);
596 MLX5_SET(parse_graph_arc, in_off, arc_parse_graph_node,
597 ia->arc_parse_graph_node);
598 MLX5_SET(parse_graph_arc, in_off,
599 parse_graph_node_handle,
600 ia->parse_graph_node_handle);
602 if (oa->arc_parse_graph_node != 0) {
603 MLX5_SET(parse_graph_arc, out_off,
604 compare_condition_value,
605 oa->compare_condition_value);
606 MLX5_SET(parse_graph_arc, out_off, start_inner_tunnel,
607 oa->start_inner_tunnel);
608 MLX5_SET(parse_graph_arc, out_off, arc_parse_graph_node,
609 oa->arc_parse_graph_node);
610 MLX5_SET(parse_graph_arc, out_off,
611 parse_graph_node_handle,
612 oa->parse_graph_node_handle);
615 parse_flex_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
617 if (!parse_flex_obj->obj) {
619 DRV_LOG(ERR, "Failed to create FLEX PARSE GRAPH object "
621 mlx5_free(parse_flex_obj);
624 parse_flex_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
625 return parse_flex_obj;
629 * Query HCA attributes.
630 * Using those attributes we can check on run time if the device
631 * is having the required capabilities.
634 * Context returned from mlx5 open_device() glue function.
636 * Attributes device values.
639 * 0 on success, a negative value otherwise.
642 mlx5_devx_cmd_query_hca_attr(void *ctx,
643 struct mlx5_hca_attr *attr)
645 uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
646 uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
648 int status, syndrome, rc, i;
650 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
651 MLX5_SET(query_hca_cap_in, in, op_mod,
652 MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE |
653 MLX5_HCA_CAP_OPMOD_GET_CUR);
655 rc = mlx5_glue->devx_general_cmd(ctx,
656 in, sizeof(in), out, sizeof(out));
659 status = MLX5_GET(query_hca_cap_out, out, status);
660 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
662 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
663 "status %x, syndrome = %x", status, syndrome);
666 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
667 attr->flow_counter_bulk_alloc_bitmap =
668 MLX5_GET(cmd_hca_cap, hcattr, flow_counter_bulk_alloc);
669 attr->flow_counters_dump = MLX5_GET(cmd_hca_cap, hcattr,
671 attr->log_max_rqt_size = MLX5_GET(cmd_hca_cap, hcattr,
673 attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr, eswitch_manager);
674 attr->hairpin = MLX5_GET(cmd_hca_cap, hcattr, hairpin);
675 attr->log_max_hairpin_queues = MLX5_GET(cmd_hca_cap, hcattr,
676 log_max_hairpin_queues);
677 attr->log_max_hairpin_wq_data_sz = MLX5_GET(cmd_hca_cap, hcattr,
678 log_max_hairpin_wq_data_sz);
679 attr->log_max_hairpin_num_packets = MLX5_GET
680 (cmd_hca_cap, hcattr, log_min_hairpin_wq_data_sz);
681 attr->vhca_id = MLX5_GET(cmd_hca_cap, hcattr, vhca_id);
682 attr->relaxed_ordering_write = MLX5_GET(cmd_hca_cap, hcattr,
683 relaxed_ordering_write);
684 attr->relaxed_ordering_read = MLX5_GET(cmd_hca_cap, hcattr,
685 relaxed_ordering_read);
686 attr->access_register_user = MLX5_GET(cmd_hca_cap, hcattr,
687 access_register_user);
688 attr->eth_net_offloads = MLX5_GET(cmd_hca_cap, hcattr,
690 attr->eth_virt = MLX5_GET(cmd_hca_cap, hcattr, eth_virt);
691 attr->flex_parser_protocols = MLX5_GET(cmd_hca_cap, hcattr,
692 flex_parser_protocols);
693 attr->qos.sup = MLX5_GET(cmd_hca_cap, hcattr, qos);
694 attr->vdpa.valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
696 MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q);
697 attr->vdpa.queue_counters_valid = !!(MLX5_GET64(cmd_hca_cap, hcattr,
699 MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_Q_COUNTERS);
700 attr->parse_graph_flex_node = !!(MLX5_GET64(cmd_hca_cap, hcattr,
702 MLX5_GENERAL_OBJ_TYPES_CAP_PARSE_GRAPH_FLEX_NODE);
703 attr->wqe_index_ignore = MLX5_GET(cmd_hca_cap, hcattr,
704 wqe_index_ignore_cap);
705 attr->cross_channel = MLX5_GET(cmd_hca_cap, hcattr, cd);
706 attr->non_wire_sq = MLX5_GET(cmd_hca_cap, hcattr, non_wire_sq);
707 attr->log_max_static_sq_wq = MLX5_GET(cmd_hca_cap, hcattr,
708 log_max_static_sq_wq);
709 attr->num_lag_ports = MLX5_GET(cmd_hca_cap, hcattr, num_lag_ports);
710 attr->dev_freq_khz = MLX5_GET(cmd_hca_cap, hcattr,
711 device_frequency_khz);
712 attr->scatter_fcs_w_decap_disable =
713 MLX5_GET(cmd_hca_cap, hcattr, scatter_fcs_w_decap_disable);
714 attr->regex = MLX5_GET(cmd_hca_cap, hcattr, regexp);
715 attr->regexp_num_of_engines = MLX5_GET(cmd_hca_cap, hcattr,
716 regexp_num_of_engines);
717 attr->flow_hit_aso = !!(MLX5_GET64(cmd_hca_cap, hcattr,
719 MLX5_GENERAL_OBJ_TYPES_CAP_FLOW_HIT_ASO);
720 attr->log_max_cq = MLX5_GET(cmd_hca_cap, hcattr, log_max_cq);
721 attr->log_max_qp = MLX5_GET(cmd_hca_cap, hcattr, log_max_qp);
722 attr->log_max_cq_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_cq_sz);
723 attr->log_max_qp_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_qp_sz);
724 attr->log_max_mrw_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_mrw_sz);
725 attr->log_max_pd = MLX5_GET(cmd_hca_cap, hcattr, log_max_pd);
726 attr->log_max_srq = MLX5_GET(cmd_hca_cap, hcattr, log_max_srq);
727 attr->log_max_srq_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_srq_sz);
729 MLX5_SET(query_hca_cap_in, in, op_mod,
730 MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
731 MLX5_HCA_CAP_OPMOD_GET_CUR);
732 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in),
737 DRV_LOG(DEBUG, "Failed to query devx QOS capabilities,"
738 " status %x, syndrome = %x", status, syndrome);
741 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
742 attr->qos.srtcm_sup =
743 MLX5_GET(qos_cap, hcattr, flow_meter_srtcm);
744 attr->qos.log_max_flow_meter =
745 MLX5_GET(qos_cap, hcattr, log_max_flow_meter);
746 attr->qos.flow_meter_reg_c_ids =
747 MLX5_GET(qos_cap, hcattr, flow_meter_reg_id);
748 attr->qos.flow_meter_reg_share =
749 MLX5_GET(qos_cap, hcattr, flow_meter_reg_share);
750 attr->qos.packet_pacing =
751 MLX5_GET(qos_cap, hcattr, packet_pacing);
752 attr->qos.wqe_rate_pp =
753 MLX5_GET(qos_cap, hcattr, wqe_rate_pp);
755 if (attr->vdpa.valid)
756 mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa);
757 if (!attr->eth_net_offloads)
760 /* Query Flow Sampler Capability From FLow Table Properties Layout. */
761 memset(in, 0, sizeof(in));
762 memset(out, 0, sizeof(out));
763 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
764 MLX5_SET(query_hca_cap_in, in, op_mod,
765 MLX5_GET_HCA_CAP_OP_MOD_NIC_FLOW_TABLE |
766 MLX5_HCA_CAP_OPMOD_GET_CUR);
768 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
771 status = MLX5_GET(query_hca_cap_out, out, status);
772 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
774 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
775 "status %x, syndrome = %x", status, syndrome);
776 attr->log_max_ft_sampler_num = 0;
779 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
780 attr->log_max_ft_sampler_num =
781 MLX5_GET(flow_table_nic_cap,
782 hcattr, flow_table_properties.log_max_ft_sampler_num);
784 /* Query HCA offloads for Ethernet protocol. */
785 memset(in, 0, sizeof(in));
786 memset(out, 0, sizeof(out));
787 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
788 MLX5_SET(query_hca_cap_in, in, op_mod,
789 MLX5_GET_HCA_CAP_OP_MOD_ETHERNET_OFFLOAD_CAPS |
790 MLX5_HCA_CAP_OPMOD_GET_CUR);
792 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out));
794 attr->eth_net_offloads = 0;
797 status = MLX5_GET(query_hca_cap_out, out, status);
798 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
800 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
801 "status %x, syndrome = %x", status, syndrome);
802 attr->eth_net_offloads = 0;
805 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
806 attr->wqe_vlan_insert = MLX5_GET(per_protocol_networking_offload_caps,
807 hcattr, wqe_vlan_insert);
808 attr->lro_cap = MLX5_GET(per_protocol_networking_offload_caps, hcattr,
810 attr->tunnel_lro_gre = MLX5_GET(per_protocol_networking_offload_caps,
811 hcattr, tunnel_lro_gre);
812 attr->tunnel_lro_vxlan = MLX5_GET(per_protocol_networking_offload_caps,
813 hcattr, tunnel_lro_vxlan);
814 attr->lro_max_msg_sz_mode = MLX5_GET
815 (per_protocol_networking_offload_caps,
816 hcattr, lro_max_msg_sz_mode);
817 for (i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) {
818 attr->lro_timer_supported_periods[i] =
819 MLX5_GET(per_protocol_networking_offload_caps, hcattr,
820 lro_timer_supported_periods[i]);
822 attr->lro_min_mss_size = MLX5_GET(per_protocol_networking_offload_caps,
823 hcattr, lro_min_mss_size);
824 attr->tunnel_stateless_geneve_rx =
825 MLX5_GET(per_protocol_networking_offload_caps,
826 hcattr, tunnel_stateless_geneve_rx);
827 attr->geneve_max_opt_len =
828 MLX5_GET(per_protocol_networking_offload_caps,
829 hcattr, max_geneve_opt_len);
830 attr->wqe_inline_mode = MLX5_GET(per_protocol_networking_offload_caps,
831 hcattr, wqe_inline_mode);
832 attr->tunnel_stateless_gtp = MLX5_GET
833 (per_protocol_networking_offload_caps,
834 hcattr, tunnel_stateless_gtp);
835 attr->rss_ind_tbl_cap = MLX5_GET
836 (per_protocol_networking_offload_caps,
837 hcattr, rss_ind_tbl_cap);
838 if (attr->wqe_inline_mode != MLX5_CAP_INLINE_MODE_VPORT_CONTEXT)
840 if (attr->eth_virt) {
841 rc = mlx5_devx_cmd_query_nic_vport_context(ctx, 0, attr);
849 rc = (rc > 0) ? -rc : rc;
854 * Query TIS transport domain from QP verbs object using DevX API.
857 * Pointer to verbs QP returned by ibv_create_qp .
859 * TIS number of TIS to query.
861 * Pointer to TIS transport domain variable, to be set by the routine.
864 * 0 on success, a negative value otherwise.
867 mlx5_devx_cmd_qp_query_tis_td(void *qp, uint32_t tis_num,
870 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
871 uint32_t in[MLX5_ST_SZ_DW(query_tis_in)] = {0};
872 uint32_t out[MLX5_ST_SZ_DW(query_tis_out)] = {0};
876 MLX5_SET(query_tis_in, in, opcode, MLX5_CMD_OP_QUERY_TIS);
877 MLX5_SET(query_tis_in, in, tisn, tis_num);
878 rc = mlx5_glue->devx_qp_query(qp, in, sizeof(in), out, sizeof(out));
880 DRV_LOG(ERR, "Failed to query QP using DevX");
883 tis_ctx = MLX5_ADDR_OF(query_tis_out, out, tis_context);
884 *tis_td = MLX5_GET(tisc, tis_ctx, transport_domain);
895 * Fill WQ data for DevX API command.
896 * Utility function for use when creating DevX objects containing a WQ.
899 * Pointer to WQ context to fill with data.
900 * @param [in] wq_attr
901 * Pointer to WQ attributes structure to fill in WQ context.
904 devx_cmd_fill_wq_data(void *wq_ctx, struct mlx5_devx_wq_attr *wq_attr)
906 MLX5_SET(wq, wq_ctx, wq_type, wq_attr->wq_type);
907 MLX5_SET(wq, wq_ctx, wq_signature, wq_attr->wq_signature);
908 MLX5_SET(wq, wq_ctx, end_padding_mode, wq_attr->end_padding_mode);
909 MLX5_SET(wq, wq_ctx, cd_slave, wq_attr->cd_slave);
910 MLX5_SET(wq, wq_ctx, hds_skip_first_sge, wq_attr->hds_skip_first_sge);
911 MLX5_SET(wq, wq_ctx, log2_hds_buf_size, wq_attr->log2_hds_buf_size);
912 MLX5_SET(wq, wq_ctx, page_offset, wq_attr->page_offset);
913 MLX5_SET(wq, wq_ctx, lwm, wq_attr->lwm);
914 MLX5_SET(wq, wq_ctx, pd, wq_attr->pd);
915 MLX5_SET(wq, wq_ctx, uar_page, wq_attr->uar_page);
916 MLX5_SET64(wq, wq_ctx, dbr_addr, wq_attr->dbr_addr);
917 MLX5_SET(wq, wq_ctx, hw_counter, wq_attr->hw_counter);
918 MLX5_SET(wq, wq_ctx, sw_counter, wq_attr->sw_counter);
919 MLX5_SET(wq, wq_ctx, log_wq_stride, wq_attr->log_wq_stride);
920 if (wq_attr->log_wq_pg_sz > MLX5_ADAPTER_PAGE_SHIFT)
921 MLX5_SET(wq, wq_ctx, log_wq_pg_sz,
922 wq_attr->log_wq_pg_sz - MLX5_ADAPTER_PAGE_SHIFT);
923 MLX5_SET(wq, wq_ctx, log_wq_sz, wq_attr->log_wq_sz);
924 MLX5_SET(wq, wq_ctx, dbr_umem_valid, wq_attr->dbr_umem_valid);
925 MLX5_SET(wq, wq_ctx, wq_umem_valid, wq_attr->wq_umem_valid);
926 MLX5_SET(wq, wq_ctx, log_hairpin_num_packets,
927 wq_attr->log_hairpin_num_packets);
928 MLX5_SET(wq, wq_ctx, log_hairpin_data_sz, wq_attr->log_hairpin_data_sz);
929 MLX5_SET(wq, wq_ctx, single_wqe_log_num_of_strides,
930 wq_attr->single_wqe_log_num_of_strides);
931 MLX5_SET(wq, wq_ctx, two_byte_shift_en, wq_attr->two_byte_shift_en);
932 MLX5_SET(wq, wq_ctx, single_stride_log_num_of_bytes,
933 wq_attr->single_stride_log_num_of_bytes);
934 MLX5_SET(wq, wq_ctx, dbr_umem_id, wq_attr->dbr_umem_id);
935 MLX5_SET(wq, wq_ctx, wq_umem_id, wq_attr->wq_umem_id);
936 MLX5_SET64(wq, wq_ctx, wq_umem_offset, wq_attr->wq_umem_offset);
940 * Create RQ using DevX API.
943 * Context returned from mlx5 open_device() glue function.
944 * @param [in] rq_attr
945 * Pointer to create RQ attributes structure.
947 * CPU socket ID for allocations.
950 * The DevX object created, NULL otherwise and rte_errno is set.
952 struct mlx5_devx_obj *
953 mlx5_devx_cmd_create_rq(void *ctx,
954 struct mlx5_devx_create_rq_attr *rq_attr,
957 uint32_t in[MLX5_ST_SZ_DW(create_rq_in)] = {0};
958 uint32_t out[MLX5_ST_SZ_DW(create_rq_out)] = {0};
959 void *rq_ctx, *wq_ctx;
960 struct mlx5_devx_wq_attr *wq_attr;
961 struct mlx5_devx_obj *rq = NULL;
963 rq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rq), 0, socket);
965 DRV_LOG(ERR, "Failed to allocate RQ data");
969 MLX5_SET(create_rq_in, in, opcode, MLX5_CMD_OP_CREATE_RQ);
970 rq_ctx = MLX5_ADDR_OF(create_rq_in, in, ctx);
971 MLX5_SET(rqc, rq_ctx, rlky, rq_attr->rlky);
972 MLX5_SET(rqc, rq_ctx, delay_drop_en, rq_attr->delay_drop_en);
973 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
974 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
975 MLX5_SET(rqc, rq_ctx, mem_rq_type, rq_attr->mem_rq_type);
976 MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
977 MLX5_SET(rqc, rq_ctx, flush_in_error_en, rq_attr->flush_in_error_en);
978 MLX5_SET(rqc, rq_ctx, hairpin, rq_attr->hairpin);
979 MLX5_SET(rqc, rq_ctx, user_index, rq_attr->user_index);
980 MLX5_SET(rqc, rq_ctx, cqn, rq_attr->cqn);
981 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
982 MLX5_SET(rqc, rq_ctx, rmpn, rq_attr->rmpn);
983 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
984 wq_attr = &rq_attr->wq_attr;
985 devx_cmd_fill_wq_data(wq_ctx, wq_attr);
986 rq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
989 DRV_LOG(ERR, "Failed to create RQ using DevX");
994 rq->id = MLX5_GET(create_rq_out, out, rqn);
999 * Modify RQ using DevX API.
1002 * Pointer to RQ object structure.
1003 * @param [in] rq_attr
1004 * Pointer to modify RQ attributes structure.
1007 * 0 on success, a negative errno value otherwise and rte_errno is set.
1010 mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq,
1011 struct mlx5_devx_modify_rq_attr *rq_attr)
1013 uint32_t in[MLX5_ST_SZ_DW(modify_rq_in)] = {0};
1014 uint32_t out[MLX5_ST_SZ_DW(modify_rq_out)] = {0};
1015 void *rq_ctx, *wq_ctx;
1018 MLX5_SET(modify_rq_in, in, opcode, MLX5_CMD_OP_MODIFY_RQ);
1019 MLX5_SET(modify_rq_in, in, rq_state, rq_attr->rq_state);
1020 MLX5_SET(modify_rq_in, in, rqn, rq->id);
1021 MLX5_SET64(modify_rq_in, in, modify_bitmask, rq_attr->modify_bitmask);
1022 rq_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx);
1023 MLX5_SET(rqc, rq_ctx, state, rq_attr->state);
1024 if (rq_attr->modify_bitmask &
1025 MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_SCATTER_FCS)
1026 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs);
1027 if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD)
1028 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd);
1029 if (rq_attr->modify_bitmask &
1030 MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID)
1031 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id);
1032 MLX5_SET(rqc, rq_ctx, hairpin_peer_sq, rq_attr->hairpin_peer_sq);
1033 MLX5_SET(rqc, rq_ctx, hairpin_peer_vhca, rq_attr->hairpin_peer_vhca);
1034 if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_WQ_LWM) {
1035 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq);
1036 MLX5_SET(wq, wq_ctx, lwm, rq_attr->lwm);
1038 ret = mlx5_glue->devx_obj_modify(rq->obj, in, sizeof(in),
1041 DRV_LOG(ERR, "Failed to modify RQ using DevX");
1049 * Create TIR using DevX API.
1052 * Context returned from mlx5 open_device() glue function.
1053 * @param [in] tir_attr
1054 * Pointer to TIR attributes structure.
1057 * The DevX object created, NULL otherwise and rte_errno is set.
1059 struct mlx5_devx_obj *
1060 mlx5_devx_cmd_create_tir(void *ctx,
1061 struct mlx5_devx_tir_attr *tir_attr)
1063 uint32_t in[MLX5_ST_SZ_DW(create_tir_in)] = {0};
1064 uint32_t out[MLX5_ST_SZ_DW(create_tir_out)] = {0};
1065 void *tir_ctx, *outer, *inner, *rss_key;
1066 struct mlx5_devx_obj *tir = NULL;
1068 tir = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*tir), 0, SOCKET_ID_ANY);
1070 DRV_LOG(ERR, "Failed to allocate TIR data");
1074 MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR);
1075 tir_ctx = MLX5_ADDR_OF(create_tir_in, in, ctx);
1076 MLX5_SET(tirc, tir_ctx, disp_type, tir_attr->disp_type);
1077 MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs,
1078 tir_attr->lro_timeout_period_usecs);
1079 MLX5_SET(tirc, tir_ctx, lro_enable_mask, tir_attr->lro_enable_mask);
1080 MLX5_SET(tirc, tir_ctx, lro_max_msg_sz, tir_attr->lro_max_msg_sz);
1081 MLX5_SET(tirc, tir_ctx, inline_rqn, tir_attr->inline_rqn);
1082 MLX5_SET(tirc, tir_ctx, rx_hash_symmetric, tir_attr->rx_hash_symmetric);
1083 MLX5_SET(tirc, tir_ctx, tunneled_offload_en,
1084 tir_attr->tunneled_offload_en);
1085 MLX5_SET(tirc, tir_ctx, indirect_table, tir_attr->indirect_table);
1086 MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn);
1087 MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block);
1088 MLX5_SET(tirc, tir_ctx, transport_domain, tir_attr->transport_domain);
1089 rss_key = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_toeplitz_key);
1090 memcpy(rss_key, tir_attr->rx_hash_toeplitz_key, MLX5_RSS_HASH_KEY_LEN);
1091 outer = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_outer);
1092 MLX5_SET(rx_hash_field_select, outer, l3_prot_type,
1093 tir_attr->rx_hash_field_selector_outer.l3_prot_type);
1094 MLX5_SET(rx_hash_field_select, outer, l4_prot_type,
1095 tir_attr->rx_hash_field_selector_outer.l4_prot_type);
1096 MLX5_SET(rx_hash_field_select, outer, selected_fields,
1097 tir_attr->rx_hash_field_selector_outer.selected_fields);
1098 inner = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_inner);
1099 MLX5_SET(rx_hash_field_select, inner, l3_prot_type,
1100 tir_attr->rx_hash_field_selector_inner.l3_prot_type);
1101 MLX5_SET(rx_hash_field_select, inner, l4_prot_type,
1102 tir_attr->rx_hash_field_selector_inner.l4_prot_type);
1103 MLX5_SET(rx_hash_field_select, inner, selected_fields,
1104 tir_attr->rx_hash_field_selector_inner.selected_fields);
1105 tir->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1108 DRV_LOG(ERR, "Failed to create TIR using DevX");
1113 tir->id = MLX5_GET(create_tir_out, out, tirn);
1118 * Modify TIR using DevX API.
1121 * Pointer to TIR DevX object structure.
1122 * @param [in] modify_tir_attr
1123 * Pointer to TIR modification attributes structure.
1126 * 0 on success, a negative errno value otherwise and rte_errno is set.
1129 mlx5_devx_cmd_modify_tir(struct mlx5_devx_obj *tir,
1130 struct mlx5_devx_modify_tir_attr *modify_tir_attr)
1132 struct mlx5_devx_tir_attr *tir_attr = &modify_tir_attr->tir;
1133 uint32_t in[MLX5_ST_SZ_DW(modify_tir_in)] = {0};
1134 uint32_t out[MLX5_ST_SZ_DW(modify_tir_out)] = {0};
1138 MLX5_SET(modify_tir_in, in, opcode, MLX5_CMD_OP_MODIFY_TIR);
1139 MLX5_SET(modify_tir_in, in, tirn, modify_tir_attr->tirn);
1140 MLX5_SET64(modify_tir_in, in, modify_bitmask,
1141 modify_tir_attr->modify_bitmask);
1142 tir_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx);
1143 if (modify_tir_attr->modify_bitmask &
1144 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_LRO) {
1145 MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs,
1146 tir_attr->lro_timeout_period_usecs);
1147 MLX5_SET(tirc, tir_ctx, lro_enable_mask,
1148 tir_attr->lro_enable_mask);
1149 MLX5_SET(tirc, tir_ctx, lro_max_msg_sz,
1150 tir_attr->lro_max_msg_sz);
1152 if (modify_tir_attr->modify_bitmask &
1153 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_INDIRECT_TABLE)
1154 MLX5_SET(tirc, tir_ctx, indirect_table,
1155 tir_attr->indirect_table);
1156 if (modify_tir_attr->modify_bitmask &
1157 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_HASH) {
1159 void *outer, *inner;
1161 MLX5_SET(tirc, tir_ctx, rx_hash_symmetric,
1162 tir_attr->rx_hash_symmetric);
1163 MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn);
1164 for (i = 0; i < 10; i++) {
1165 MLX5_SET(tirc, tir_ctx, rx_hash_toeplitz_key[i],
1166 tir_attr->rx_hash_toeplitz_key[i]);
1168 outer = MLX5_ADDR_OF(tirc, tir_ctx,
1169 rx_hash_field_selector_outer);
1170 MLX5_SET(rx_hash_field_select, outer, l3_prot_type,
1171 tir_attr->rx_hash_field_selector_outer.l3_prot_type);
1172 MLX5_SET(rx_hash_field_select, outer, l4_prot_type,
1173 tir_attr->rx_hash_field_selector_outer.l4_prot_type);
1175 (rx_hash_field_select, outer, selected_fields,
1176 tir_attr->rx_hash_field_selector_outer.selected_fields);
1177 inner = MLX5_ADDR_OF(tirc, tir_ctx,
1178 rx_hash_field_selector_inner);
1179 MLX5_SET(rx_hash_field_select, inner, l3_prot_type,
1180 tir_attr->rx_hash_field_selector_inner.l3_prot_type);
1181 MLX5_SET(rx_hash_field_select, inner, l4_prot_type,
1182 tir_attr->rx_hash_field_selector_inner.l4_prot_type);
1184 (rx_hash_field_select, inner, selected_fields,
1185 tir_attr->rx_hash_field_selector_inner.selected_fields);
1187 if (modify_tir_attr->modify_bitmask &
1188 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_SELF_LB_EN) {
1189 MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block);
1191 ret = mlx5_glue->devx_obj_modify(tir->obj, in, sizeof(in),
1194 DRV_LOG(ERR, "Failed to modify TIR using DevX");
1202 * Create RQT using DevX API.
1205 * Context returned from mlx5 open_device() glue function.
1206 * @param [in] rqt_attr
1207 * Pointer to RQT attributes structure.
1210 * The DevX object created, NULL otherwise and rte_errno is set.
1212 struct mlx5_devx_obj *
1213 mlx5_devx_cmd_create_rqt(void *ctx,
1214 struct mlx5_devx_rqt_attr *rqt_attr)
1216 uint32_t *in = NULL;
1217 uint32_t inlen = MLX5_ST_SZ_BYTES(create_rqt_in) +
1218 rqt_attr->rqt_actual_size * sizeof(uint32_t);
1219 uint32_t out[MLX5_ST_SZ_DW(create_rqt_out)] = {0};
1221 struct mlx5_devx_obj *rqt = NULL;
1224 in = mlx5_malloc(MLX5_MEM_ZERO, inlen, 0, SOCKET_ID_ANY);
1226 DRV_LOG(ERR, "Failed to allocate RQT IN data");
1230 rqt = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rqt), 0, SOCKET_ID_ANY);
1232 DRV_LOG(ERR, "Failed to allocate RQT data");
1237 MLX5_SET(create_rqt_in, in, opcode, MLX5_CMD_OP_CREATE_RQT);
1238 rqt_ctx = MLX5_ADDR_OF(create_rqt_in, in, rqt_context);
1239 MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
1240 MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
1241 MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
1242 for (i = 0; i < rqt_attr->rqt_actual_size; i++)
1243 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
1244 rqt->obj = mlx5_glue->devx_obj_create(ctx, in, inlen, out, sizeof(out));
1247 DRV_LOG(ERR, "Failed to create RQT using DevX");
1252 rqt->id = MLX5_GET(create_rqt_out, out, rqtn);
1257 * Modify RQT using DevX API.
1260 * Pointer to RQT DevX object structure.
1261 * @param [in] rqt_attr
1262 * Pointer to RQT attributes structure.
1265 * 0 on success, a negative errno value otherwise and rte_errno is set.
1268 mlx5_devx_cmd_modify_rqt(struct mlx5_devx_obj *rqt,
1269 struct mlx5_devx_rqt_attr *rqt_attr)
1271 uint32_t inlen = MLX5_ST_SZ_BYTES(modify_rqt_in) +
1272 rqt_attr->rqt_actual_size * sizeof(uint32_t);
1273 uint32_t out[MLX5_ST_SZ_DW(modify_rqt_out)] = {0};
1274 uint32_t *in = mlx5_malloc(MLX5_MEM_ZERO, inlen, 0, SOCKET_ID_ANY);
1280 DRV_LOG(ERR, "Failed to allocate RQT modify IN data.");
1284 MLX5_SET(modify_rqt_in, in, opcode, MLX5_CMD_OP_MODIFY_RQT);
1285 MLX5_SET(modify_rqt_in, in, rqtn, rqt->id);
1286 MLX5_SET64(modify_rqt_in, in, modify_bitmask, 0x1);
1287 rqt_ctx = MLX5_ADDR_OF(modify_rqt_in, in, rqt_context);
1288 MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type);
1289 MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size);
1290 MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size);
1291 for (i = 0; i < rqt_attr->rqt_actual_size; i++)
1292 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]);
1293 ret = mlx5_glue->devx_obj_modify(rqt->obj, in, inlen, out, sizeof(out));
1296 DRV_LOG(ERR, "Failed to modify RQT using DevX.");
1304 * Create SQ using DevX API.
1307 * Context returned from mlx5 open_device() glue function.
1308 * @param [in] sq_attr
1309 * Pointer to SQ attributes structure.
1310 * @param [in] socket
1311 * CPU socket ID for allocations.
1314 * The DevX object created, NULL otherwise and rte_errno is set.
1316 struct mlx5_devx_obj *
1317 mlx5_devx_cmd_create_sq(void *ctx,
1318 struct mlx5_devx_create_sq_attr *sq_attr)
1320 uint32_t in[MLX5_ST_SZ_DW(create_sq_in)] = {0};
1321 uint32_t out[MLX5_ST_SZ_DW(create_sq_out)] = {0};
1324 struct mlx5_devx_wq_attr *wq_attr;
1325 struct mlx5_devx_obj *sq = NULL;
1327 sq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sq), 0, SOCKET_ID_ANY);
1329 DRV_LOG(ERR, "Failed to allocate SQ data");
1333 MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ);
1334 sq_ctx = MLX5_ADDR_OF(create_sq_in, in, ctx);
1335 MLX5_SET(sqc, sq_ctx, rlky, sq_attr->rlky);
1336 MLX5_SET(sqc, sq_ctx, cd_master, sq_attr->cd_master);
1337 MLX5_SET(sqc, sq_ctx, fre, sq_attr->fre);
1338 MLX5_SET(sqc, sq_ctx, flush_in_error_en, sq_attr->flush_in_error_en);
1339 MLX5_SET(sqc, sq_ctx, allow_multi_pkt_send_wqe,
1340 sq_attr->allow_multi_pkt_send_wqe);
1341 MLX5_SET(sqc, sq_ctx, min_wqe_inline_mode,
1342 sq_attr->min_wqe_inline_mode);
1343 MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
1344 MLX5_SET(sqc, sq_ctx, reg_umr, sq_attr->reg_umr);
1345 MLX5_SET(sqc, sq_ctx, allow_swp, sq_attr->allow_swp);
1346 MLX5_SET(sqc, sq_ctx, hairpin, sq_attr->hairpin);
1347 MLX5_SET(sqc, sq_ctx, non_wire, sq_attr->non_wire);
1348 MLX5_SET(sqc, sq_ctx, static_sq_wq, sq_attr->static_sq_wq);
1349 MLX5_SET(sqc, sq_ctx, user_index, sq_attr->user_index);
1350 MLX5_SET(sqc, sq_ctx, cqn, sq_attr->cqn);
1351 MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index,
1352 sq_attr->packet_pacing_rate_limit_index);
1353 MLX5_SET(sqc, sq_ctx, tis_lst_sz, sq_attr->tis_lst_sz);
1354 MLX5_SET(sqc, sq_ctx, tis_num_0, sq_attr->tis_num);
1355 wq_ctx = MLX5_ADDR_OF(sqc, sq_ctx, wq);
1356 wq_attr = &sq_attr->wq_attr;
1357 devx_cmd_fill_wq_data(wq_ctx, wq_attr);
1358 sq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1361 DRV_LOG(ERR, "Failed to create SQ using DevX");
1366 sq->id = MLX5_GET(create_sq_out, out, sqn);
1371 * Modify SQ using DevX API.
1374 * Pointer to SQ object structure.
1375 * @param [in] sq_attr
1376 * Pointer to SQ attributes structure.
1379 * 0 on success, a negative errno value otherwise and rte_errno is set.
1382 mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq,
1383 struct mlx5_devx_modify_sq_attr *sq_attr)
1385 uint32_t in[MLX5_ST_SZ_DW(modify_sq_in)] = {0};
1386 uint32_t out[MLX5_ST_SZ_DW(modify_sq_out)] = {0};
1390 MLX5_SET(modify_sq_in, in, opcode, MLX5_CMD_OP_MODIFY_SQ);
1391 MLX5_SET(modify_sq_in, in, sq_state, sq_attr->sq_state);
1392 MLX5_SET(modify_sq_in, in, sqn, sq->id);
1393 sq_ctx = MLX5_ADDR_OF(modify_sq_in, in, ctx);
1394 MLX5_SET(sqc, sq_ctx, state, sq_attr->state);
1395 MLX5_SET(sqc, sq_ctx, hairpin_peer_rq, sq_attr->hairpin_peer_rq);
1396 MLX5_SET(sqc, sq_ctx, hairpin_peer_vhca, sq_attr->hairpin_peer_vhca);
1397 ret = mlx5_glue->devx_obj_modify(sq->obj, in, sizeof(in),
1400 DRV_LOG(ERR, "Failed to modify SQ using DevX");
1408 * Create TIS using DevX API.
1411 * Context returned from mlx5 open_device() glue function.
1412 * @param [in] tis_attr
1413 * Pointer to TIS attributes structure.
1416 * The DevX object created, NULL otherwise and rte_errno is set.
1418 struct mlx5_devx_obj *
1419 mlx5_devx_cmd_create_tis(void *ctx,
1420 struct mlx5_devx_tis_attr *tis_attr)
1422 uint32_t in[MLX5_ST_SZ_DW(create_tis_in)] = {0};
1423 uint32_t out[MLX5_ST_SZ_DW(create_tis_out)] = {0};
1424 struct mlx5_devx_obj *tis = NULL;
1427 tis = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*tis), 0, SOCKET_ID_ANY);
1429 DRV_LOG(ERR, "Failed to allocate TIS object");
1433 MLX5_SET(create_tis_in, in, opcode, MLX5_CMD_OP_CREATE_TIS);
1434 tis_ctx = MLX5_ADDR_OF(create_tis_in, in, ctx);
1435 MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity,
1436 tis_attr->strict_lag_tx_port_affinity);
1437 MLX5_SET(tisc, tis_ctx, lag_tx_port_affinity,
1438 tis_attr->lag_tx_port_affinity);
1439 MLX5_SET(tisc, tis_ctx, prio, tis_attr->prio);
1440 MLX5_SET(tisc, tis_ctx, transport_domain,
1441 tis_attr->transport_domain);
1442 tis->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1445 DRV_LOG(ERR, "Failed to create TIS using DevX");
1450 tis->id = MLX5_GET(create_tis_out, out, tisn);
1455 * Create transport domain using DevX API.
1458 * Context returned from mlx5 open_device() glue function.
1460 * The DevX object created, NULL otherwise and rte_errno is set.
1462 struct mlx5_devx_obj *
1463 mlx5_devx_cmd_create_td(void *ctx)
1465 uint32_t in[MLX5_ST_SZ_DW(alloc_transport_domain_in)] = {0};
1466 uint32_t out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {0};
1467 struct mlx5_devx_obj *td = NULL;
1469 td = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*td), 0, SOCKET_ID_ANY);
1471 DRV_LOG(ERR, "Failed to allocate TD object");
1475 MLX5_SET(alloc_transport_domain_in, in, opcode,
1476 MLX5_CMD_OP_ALLOC_TRANSPORT_DOMAIN);
1477 td->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
1480 DRV_LOG(ERR, "Failed to create TIS using DevX");
1485 td->id = MLX5_GET(alloc_transport_domain_out, out,
1491 * Dump all flows to file.
1493 * @param[in] fdb_domain
1495 * @param[in] rx_domain
1497 * @param[in] tx_domain
1500 * Pointer to file stream.
1503 * 0 on success, a nagative value otherwise.
1506 mlx5_devx_cmd_flow_dump(void *fdb_domain __rte_unused,
1507 void *rx_domain __rte_unused,
1508 void *tx_domain __rte_unused, FILE *file __rte_unused)
1512 #ifdef HAVE_MLX5_DR_FLOW_DUMP
1514 ret = mlx5_glue->dr_dump_domain(file, fdb_domain);
1518 MLX5_ASSERT(rx_domain);
1519 ret = mlx5_glue->dr_dump_domain(file, rx_domain);
1522 MLX5_ASSERT(tx_domain);
1523 ret = mlx5_glue->dr_dump_domain(file, tx_domain);
1531 * Create CQ using DevX API.
1534 * Context returned from mlx5 open_device() glue function.
1536 * Pointer to CQ attributes structure.
1539 * The DevX object created, NULL otherwise and rte_errno is set.
1541 struct mlx5_devx_obj *
1542 mlx5_devx_cmd_create_cq(void *ctx, struct mlx5_devx_cq_attr *attr)
1544 uint32_t in[MLX5_ST_SZ_DW(create_cq_in)] = {0};
1545 uint32_t out[MLX5_ST_SZ_DW(create_cq_out)] = {0};
1546 struct mlx5_devx_obj *cq_obj = mlx5_malloc(MLX5_MEM_ZERO,
1549 void *cqctx = MLX5_ADDR_OF(create_cq_in, in, cq_context);
1552 DRV_LOG(ERR, "Failed to allocate CQ object memory.");
1556 MLX5_SET(create_cq_in, in, opcode, MLX5_CMD_OP_CREATE_CQ);
1557 if (attr->db_umem_valid) {
1558 MLX5_SET(cqc, cqctx, dbr_umem_valid, attr->db_umem_valid);
1559 MLX5_SET(cqc, cqctx, dbr_umem_id, attr->db_umem_id);
1560 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_umem_offset);
1562 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_addr);
1564 MLX5_SET(cqc, cqctx, cqe_sz, (RTE_CACHE_LINE_SIZE == 128) ?
1565 MLX5_CQE_SIZE_128B : MLX5_CQE_SIZE_64B);
1566 MLX5_SET(cqc, cqctx, cc, attr->use_first_only);
1567 MLX5_SET(cqc, cqctx, oi, attr->overrun_ignore);
1568 MLX5_SET(cqc, cqctx, log_cq_size, attr->log_cq_size);
1569 if (attr->log_page_size > MLX5_ADAPTER_PAGE_SHIFT)
1570 MLX5_SET(cqc, cqctx, log_page_size,
1571 attr->log_page_size - MLX5_ADAPTER_PAGE_SHIFT);
1572 MLX5_SET(cqc, cqctx, c_eqn, attr->eqn);
1573 MLX5_SET(cqc, cqctx, uar_page, attr->uar_page_id);
1574 MLX5_SET(cqc, cqctx, cqe_comp_en, !!attr->cqe_comp_en);
1575 MLX5_SET(cqc, cqctx, mini_cqe_res_format, attr->mini_cqe_res_format);
1576 MLX5_SET(cqc, cqctx, mini_cqe_res_format_ext,
1577 attr->mini_cqe_res_format_ext);
1578 if (attr->q_umem_valid) {
1579 MLX5_SET(create_cq_in, in, cq_umem_valid, attr->q_umem_valid);
1580 MLX5_SET(create_cq_in, in, cq_umem_id, attr->q_umem_id);
1581 MLX5_SET64(create_cq_in, in, cq_umem_offset,
1582 attr->q_umem_offset);
1584 cq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1588 DRV_LOG(ERR, "Failed to create CQ using DevX errno=%d.", errno);
1592 cq_obj->id = MLX5_GET(create_cq_out, out, cqn);
1597 * Create VIRTQ using DevX API.
1600 * Context returned from mlx5 open_device() glue function.
1602 * Pointer to VIRTQ attributes structure.
1605 * The DevX object created, NULL otherwise and rte_errno is set.
1607 struct mlx5_devx_obj *
1608 mlx5_devx_cmd_create_virtq(void *ctx,
1609 struct mlx5_devx_virtq_attr *attr)
1611 uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1612 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1613 struct mlx5_devx_obj *virtq_obj = mlx5_malloc(MLX5_MEM_ZERO,
1616 void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1617 void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1618 void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1621 DRV_LOG(ERR, "Failed to allocate virtq data.");
1625 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1626 MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
1627 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1628 MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1629 MLX5_SET16(virtio_net_q, virtq, hw_available_index,
1630 attr->hw_available_index);
1631 MLX5_SET16(virtio_net_q, virtq, hw_used_index, attr->hw_used_index);
1632 MLX5_SET16(virtio_net_q, virtq, tso_ipv4, attr->tso_ipv4);
1633 MLX5_SET16(virtio_net_q, virtq, tso_ipv6, attr->tso_ipv6);
1634 MLX5_SET16(virtio_net_q, virtq, tx_csum, attr->tx_csum);
1635 MLX5_SET16(virtio_net_q, virtq, rx_csum, attr->rx_csum);
1636 MLX5_SET16(virtio_q, virtctx, virtio_version_1_0,
1637 attr->virtio_version_1_0);
1638 MLX5_SET16(virtio_q, virtctx, event_mode, attr->event_mode);
1639 MLX5_SET(virtio_q, virtctx, event_qpn_or_msix, attr->qp_id);
1640 MLX5_SET64(virtio_q, virtctx, desc_addr, attr->desc_addr);
1641 MLX5_SET64(virtio_q, virtctx, used_addr, attr->used_addr);
1642 MLX5_SET64(virtio_q, virtctx, available_addr, attr->available_addr);
1643 MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1644 MLX5_SET16(virtio_q, virtctx, queue_size, attr->q_size);
1645 MLX5_SET(virtio_q, virtctx, virtio_q_mkey, attr->mkey);
1646 MLX5_SET(virtio_q, virtctx, umem_1_id, attr->umems[0].id);
1647 MLX5_SET(virtio_q, virtctx, umem_1_size, attr->umems[0].size);
1648 MLX5_SET64(virtio_q, virtctx, umem_1_offset, attr->umems[0].offset);
1649 MLX5_SET(virtio_q, virtctx, umem_2_id, attr->umems[1].id);
1650 MLX5_SET(virtio_q, virtctx, umem_2_size, attr->umems[1].size);
1651 MLX5_SET64(virtio_q, virtctx, umem_2_offset, attr->umems[1].offset);
1652 MLX5_SET(virtio_q, virtctx, umem_3_id, attr->umems[2].id);
1653 MLX5_SET(virtio_q, virtctx, umem_3_size, attr->umems[2].size);
1654 MLX5_SET64(virtio_q, virtctx, umem_3_offset, attr->umems[2].offset);
1655 MLX5_SET(virtio_q, virtctx, counter_set_id, attr->counters_obj_id);
1656 MLX5_SET(virtio_q, virtctx, pd, attr->pd);
1657 MLX5_SET(virtio_q, virtctx, queue_period_mode, attr->hw_latency_mode);
1658 MLX5_SET(virtio_q, virtctx, queue_period_us, attr->hw_max_latency_us);
1659 MLX5_SET(virtio_q, virtctx, queue_max_count, attr->hw_max_pending_comp);
1660 MLX5_SET(virtio_net_q, virtq, tisn_or_qpn, attr->tis_id);
1661 virtq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1663 if (!virtq_obj->obj) {
1665 DRV_LOG(ERR, "Failed to create VIRTQ Obj using DevX.");
1666 mlx5_free(virtq_obj);
1669 virtq_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
1674 * Modify VIRTQ using DevX API.
1676 * @param[in] virtq_obj
1677 * Pointer to virtq object structure.
1679 * Pointer to modify virtq attributes structure.
1682 * 0 on success, a negative errno value otherwise and rte_errno is set.
1685 mlx5_devx_cmd_modify_virtq(struct mlx5_devx_obj *virtq_obj,
1686 struct mlx5_devx_virtq_attr *attr)
1688 uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0};
1689 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1690 void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq);
1691 void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr);
1692 void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context);
1695 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1696 MLX5_CMD_OP_MODIFY_GENERAL_OBJECT);
1697 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1698 MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1699 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1700 MLX5_SET64(virtio_net_q, virtq, modify_field_select, attr->type);
1701 MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index);
1702 switch (attr->type) {
1703 case MLX5_VIRTQ_MODIFY_TYPE_STATE:
1704 MLX5_SET16(virtio_net_q, virtq, state, attr->state);
1706 case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS:
1707 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_mkey,
1708 attr->dirty_bitmap_mkey);
1709 MLX5_SET64(virtio_net_q, virtq, dirty_bitmap_addr,
1710 attr->dirty_bitmap_addr);
1711 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_size,
1712 attr->dirty_bitmap_size);
1714 case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_DUMP_ENABLE:
1715 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_dump_enable,
1716 attr->dirty_bitmap_dump_enable);
1722 ret = mlx5_glue->devx_obj_modify(virtq_obj->obj, in, sizeof(in),
1725 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1733 * Query VIRTQ using DevX API.
1735 * @param[in] virtq_obj
1736 * Pointer to virtq object structure.
1737 * @param [in/out] attr
1738 * Pointer to virtq attributes structure.
1741 * 0 on success, a negative errno value otherwise and rte_errno is set.
1744 mlx5_devx_cmd_query_virtq(struct mlx5_devx_obj *virtq_obj,
1745 struct mlx5_devx_virtq_attr *attr)
1747 uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
1748 uint32_t out[MLX5_ST_SZ_DW(query_virtq_out)] = {0};
1749 void *hdr = MLX5_ADDR_OF(query_virtq_out, in, hdr);
1750 void *virtq = MLX5_ADDR_OF(query_virtq_out, out, virtq);
1753 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1754 MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
1755 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1756 MLX5_GENERAL_OBJ_TYPE_VIRTQ);
1757 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id);
1758 ret = mlx5_glue->devx_obj_query(virtq_obj->obj, in, sizeof(in),
1761 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX.");
1765 attr->hw_available_index = MLX5_GET16(virtio_net_q, virtq,
1766 hw_available_index);
1767 attr->hw_used_index = MLX5_GET16(virtio_net_q, virtq, hw_used_index);
1768 attr->state = MLX5_GET16(virtio_net_q, virtq, state);
1769 attr->error_type = MLX5_GET16(virtio_net_q, virtq,
1770 virtio_q_context.error_type);
1775 * Create QP using DevX API.
1778 * Context returned from mlx5 open_device() glue function.
1780 * Pointer to QP attributes structure.
1783 * The DevX object created, NULL otherwise and rte_errno is set.
1785 struct mlx5_devx_obj *
1786 mlx5_devx_cmd_create_qp(void *ctx,
1787 struct mlx5_devx_qp_attr *attr)
1789 uint32_t in[MLX5_ST_SZ_DW(create_qp_in)] = {0};
1790 uint32_t out[MLX5_ST_SZ_DW(create_qp_out)] = {0};
1791 struct mlx5_devx_obj *qp_obj = mlx5_malloc(MLX5_MEM_ZERO,
1794 void *qpc = MLX5_ADDR_OF(create_qp_in, in, qpc);
1797 DRV_LOG(ERR, "Failed to allocate QP data.");
1801 MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP);
1802 MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC);
1803 MLX5_SET(qpc, qpc, pd, attr->pd);
1804 if (attr->uar_index) {
1805 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1806 MLX5_SET(qpc, qpc, uar_page, attr->uar_index);
1807 if (attr->log_page_size > MLX5_ADAPTER_PAGE_SHIFT)
1808 MLX5_SET(qpc, qpc, log_page_size,
1809 attr->log_page_size - MLX5_ADAPTER_PAGE_SHIFT);
1810 if (attr->sq_size) {
1811 MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->sq_size));
1812 MLX5_SET(qpc, qpc, cqn_snd, attr->cqn);
1813 MLX5_SET(qpc, qpc, log_sq_size,
1814 rte_log2_u32(attr->sq_size));
1816 MLX5_SET(qpc, qpc, no_sq, 1);
1818 if (attr->rq_size) {
1819 MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->rq_size));
1820 MLX5_SET(qpc, qpc, cqn_rcv, attr->cqn);
1821 MLX5_SET(qpc, qpc, log_rq_stride, attr->log_rq_stride -
1822 MLX5_LOG_RQ_STRIDE_SHIFT);
1823 MLX5_SET(qpc, qpc, log_rq_size,
1824 rte_log2_u32(attr->rq_size));
1825 MLX5_SET(qpc, qpc, rq_type, MLX5_NON_ZERO_RQ);
1827 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1829 if (attr->dbr_umem_valid) {
1830 MLX5_SET(qpc, qpc, dbr_umem_valid,
1831 attr->dbr_umem_valid);
1832 MLX5_SET(qpc, qpc, dbr_umem_id, attr->dbr_umem_id);
1834 MLX5_SET64(qpc, qpc, dbr_addr, attr->dbr_address);
1835 MLX5_SET64(create_qp_in, in, wq_umem_offset,
1836 attr->wq_umem_offset);
1837 MLX5_SET(create_qp_in, in, wq_umem_id, attr->wq_umem_id);
1838 MLX5_SET(create_qp_in, in, wq_umem_valid, 1);
1840 /* Special QP to be managed by FW - no SQ\RQ\CQ\UAR\DB rec. */
1841 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ);
1842 MLX5_SET(qpc, qpc, no_sq, 1);
1844 qp_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1848 DRV_LOG(ERR, "Failed to create QP Obj using DevX.");
1852 qp_obj->id = MLX5_GET(create_qp_out, out, qpn);
1857 * Modify QP using DevX API.
1858 * Currently supports only force loop-back QP.
1861 * Pointer to QP object structure.
1862 * @param [in] qp_st_mod_op
1863 * The QP state modification operation.
1864 * @param [in] remote_qp_id
1865 * The remote QP ID for MLX5_CMD_OP_INIT2RTR_QP operation.
1868 * 0 on success, a negative errno value otherwise and rte_errno is set.
1871 mlx5_devx_cmd_modify_qp_state(struct mlx5_devx_obj *qp, uint32_t qp_st_mod_op,
1872 uint32_t remote_qp_id)
1875 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_in)];
1876 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_in)];
1877 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_in)];
1880 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_out)];
1881 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_out)];
1882 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_out)];
1887 unsigned int outlen;
1889 memset(&in, 0, sizeof(in));
1890 memset(&out, 0, sizeof(out));
1891 MLX5_SET(rst2init_qp_in, &in, opcode, qp_st_mod_op);
1892 switch (qp_st_mod_op) {
1893 case MLX5_CMD_OP_RST2INIT_QP:
1894 MLX5_SET(rst2init_qp_in, &in, qpn, qp->id);
1895 qpc = MLX5_ADDR_OF(rst2init_qp_in, &in, qpc);
1896 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1897 MLX5_SET(qpc, qpc, rre, 1);
1898 MLX5_SET(qpc, qpc, rwe, 1);
1899 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
1900 inlen = sizeof(in.rst2init);
1901 outlen = sizeof(out.rst2init);
1903 case MLX5_CMD_OP_INIT2RTR_QP:
1904 MLX5_SET(init2rtr_qp_in, &in, qpn, qp->id);
1905 qpc = MLX5_ADDR_OF(init2rtr_qp_in, &in, qpc);
1906 MLX5_SET(qpc, qpc, primary_address_path.fl, 1);
1907 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
1908 MLX5_SET(qpc, qpc, mtu, 1);
1909 MLX5_SET(qpc, qpc, log_msg_max, 30);
1910 MLX5_SET(qpc, qpc, remote_qpn, remote_qp_id);
1911 MLX5_SET(qpc, qpc, min_rnr_nak, 0);
1912 inlen = sizeof(in.init2rtr);
1913 outlen = sizeof(out.init2rtr);
1915 case MLX5_CMD_OP_RTR2RTS_QP:
1916 qpc = MLX5_ADDR_OF(rtr2rts_qp_in, &in, qpc);
1917 MLX5_SET(rtr2rts_qp_in, &in, qpn, qp->id);
1918 MLX5_SET(qpc, qpc, primary_address_path.ack_timeout, 14);
1919 MLX5_SET(qpc, qpc, log_ack_req_freq, 0);
1920 MLX5_SET(qpc, qpc, retry_count, 7);
1921 MLX5_SET(qpc, qpc, rnr_retry, 7);
1922 inlen = sizeof(in.rtr2rts);
1923 outlen = sizeof(out.rtr2rts);
1926 DRV_LOG(ERR, "Invalid or unsupported QP modify op %u.",
1931 ret = mlx5_glue->devx_obj_modify(qp->obj, &in, inlen, &out, outlen);
1933 DRV_LOG(ERR, "Failed to modify QP using DevX.");
1940 struct mlx5_devx_obj *
1941 mlx5_devx_cmd_create_virtio_q_counters(void *ctx)
1943 uint32_t in[MLX5_ST_SZ_DW(create_virtio_q_counters_in)] = {0};
1944 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
1945 struct mlx5_devx_obj *couners_obj = mlx5_malloc(MLX5_MEM_ZERO,
1946 sizeof(*couners_obj), 0,
1948 void *hdr = MLX5_ADDR_OF(create_virtio_q_counters_in, in, hdr);
1951 DRV_LOG(ERR, "Failed to allocate virtio queue counters data.");
1955 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1956 MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
1957 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1958 MLX5_GENERAL_OBJ_TYPE_VIRTIO_Q_COUNTERS);
1959 couners_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
1961 if (!couners_obj->obj) {
1963 DRV_LOG(ERR, "Failed to create virtio queue counters Obj using"
1965 mlx5_free(couners_obj);
1968 couners_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
1973 mlx5_devx_cmd_query_virtio_q_counters(struct mlx5_devx_obj *couners_obj,
1974 struct mlx5_devx_virtio_q_couners_attr *attr)
1976 uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
1977 uint32_t out[MLX5_ST_SZ_DW(query_virtio_q_counters_out)] = {0};
1978 void *hdr = MLX5_ADDR_OF(query_virtio_q_counters_out, in, hdr);
1979 void *virtio_q_counters = MLX5_ADDR_OF(query_virtio_q_counters_out, out,
1983 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode,
1984 MLX5_CMD_OP_QUERY_GENERAL_OBJECT);
1985 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type,
1986 MLX5_GENERAL_OBJ_TYPE_VIRTIO_Q_COUNTERS);
1987 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, couners_obj->id);
1988 ret = mlx5_glue->devx_obj_query(couners_obj->obj, in, sizeof(in), out,
1991 DRV_LOG(ERR, "Failed to query virtio q counters using DevX.");
1995 attr->received_desc = MLX5_GET64(virtio_q_counters, virtio_q_counters,
1997 attr->completed_desc = MLX5_GET64(virtio_q_counters, virtio_q_counters,
1999 attr->error_cqes = MLX5_GET(virtio_q_counters, virtio_q_counters,
2001 attr->bad_desc_errors = MLX5_GET(virtio_q_counters, virtio_q_counters,
2003 attr->exceed_max_chain = MLX5_GET(virtio_q_counters, virtio_q_counters,
2005 attr->invalid_buffer = MLX5_GET(virtio_q_counters, virtio_q_counters,
2011 * Create general object of type FLOW_HIT_ASO using DevX API.
2014 * Context returned from mlx5 open_device() glue function.
2016 * PD value to associate the FLOW_HIT_ASO object with.
2019 * The DevX object created, NULL otherwise and rte_errno is set.
2021 struct mlx5_devx_obj *
2022 mlx5_devx_cmd_create_flow_hit_aso_obj(void *ctx, uint32_t pd)
2024 uint32_t in[MLX5_ST_SZ_DW(create_flow_hit_aso_in)] = {0};
2025 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0};
2026 struct mlx5_devx_obj *flow_hit_aso_obj = NULL;
2029 flow_hit_aso_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*flow_hit_aso_obj),
2031 if (!flow_hit_aso_obj) {
2032 DRV_LOG(ERR, "Failed to allocate FLOW_HIT_ASO object data");
2036 ptr = MLX5_ADDR_OF(create_flow_hit_aso_in, in, hdr);
2037 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode,
2038 MLX5_CMD_OP_CREATE_GENERAL_OBJECT);
2039 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type,
2040 MLX5_GENERAL_OBJ_TYPE_FLOW_HIT_ASO);
2041 ptr = MLX5_ADDR_OF(create_flow_hit_aso_in, in, flow_hit_aso);
2042 MLX5_SET(flow_hit_aso, ptr, access_pd, pd);
2043 flow_hit_aso_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
2045 if (!flow_hit_aso_obj->obj) {
2047 DRV_LOG(ERR, "Failed to create FLOW_HIT_ASO obj using DevX.");
2048 mlx5_free(flow_hit_aso_obj);
2051 flow_hit_aso_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id);
2052 return flow_hit_aso_obj;
2056 * Create PD using DevX API.
2059 * Context returned from mlx5 open_device() glue function.
2062 * The DevX object created, NULL otherwise and rte_errno is set.
2064 struct mlx5_devx_obj *
2065 mlx5_devx_cmd_alloc_pd(void *ctx)
2067 struct mlx5_devx_obj *ppd =
2068 mlx5_malloc(MLX5_MEM_ZERO, sizeof(*ppd), 0, SOCKET_ID_ANY);
2069 u32 in[MLX5_ST_SZ_DW(alloc_pd_in)] = {0};
2070 u32 out[MLX5_ST_SZ_DW(alloc_pd_out)] = {0};
2073 DRV_LOG(ERR, "Failed to allocate PD data.");
2077 MLX5_SET(alloc_pd_in, in, opcode, MLX5_CMD_OP_ALLOC_PD);
2078 ppd->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in),
2082 DRV_LOG(ERR, "Failed to allocate PD Obj using DevX.");
2086 ppd->id = MLX5_GET(alloc_pd_out, out, pd);