log: introduce logtype register macro

[dpdk.git] / drivers / net / bnx2x / ecore_reg.h

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright (c) 2007-2013 Broadcom Corporation.
 *
 * Eric Davis        <edavis@broadcom.com>
 * David Christensen <davidch@broadcom.com>
 * Gary Zambrano     <zambrano@broadcom.com>
 *
 * Copyright (c) 2014-2018 Cavium Inc.
 * All rights reserved.
 * www.cavium.com
 */

#ifndef ECORE_REG_H
#define ECORE_REG_H

#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR                        (0x1 << 0)
#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS                (0x1 << 2)
#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU               (0x1 << 5)
#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT                (0x1 << 3)
#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR                       (0x1 << 4)
#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND                 (0x1 << 1)
/* [R 1] ATC initalization done */
#define ATC_REG_ATC_INIT_DONE                                    0x1100bc
/* [RW 6] Interrupt mask register #0 read/write */
#define ATC_REG_ATC_INT_MASK                                     0x1101c8
/* [R 6] Interrupt register #0 read */
#define ATC_REG_ATC_INT_STS                                      0x1101bc
/* [RC 6] Interrupt register #0 read clear */
#define ATC_REG_ATC_INT_STS_CLR                                  0x1101c0
/* [RW 5] Parity mask register #0 read/write */
#define ATC_REG_ATC_PRTY_MASK                                    0x1101d8
/* [R 5] Parity register #0 read */
#define ATC_REG_ATC_PRTY_STS                                     0x1101cc
/* [RC 5] Parity register #0 read clear */
#define ATC_REG_ATC_PRTY_STS_CLR                                 0x1101d0
/* [RW 19] Interrupt mask register #0 read/write */
#define BRB1_REG_BRB1_INT_MASK                                   0x60128
/* [R 19] Interrupt register #0 read */
#define BRB1_REG_BRB1_INT_STS                                    0x6011c
/* [RC 19] Interrupt register #0 read clear */
#define BRB1_REG_BRB1_INT_STS_CLR                                0x60120
/* [RW 4] Parity mask register #0 read/write */
#define BRB1_REG_BRB1_PRTY_MASK                                  0x60138
/* [R 4] Parity register #0 read */
#define BRB1_REG_BRB1_PRTY_STS                                   0x6012c
/* [RC 4] Parity register #0 read clear */
#define BRB1_REG_BRB1_PRTY_STS_CLR                               0x60130
/* [RW 11] The number of blocks guarantied for the MAC port. The register is
 * applicable only when per_class_guaranty_mode is reset.
 */
#define BRB1_REG_MAC_GUARANTIED_0                                0x601e8
#define BRB1_REG_MAC_GUARANTIED_1                                0x60240
/* [R 24] The number of full blocks. */
#define BRB1_REG_NUM_OF_FULL_BLOCKS                              0x60090
/* [RW 10] Write client 0: De-assert pause threshold. Not Functional */
#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0                          0x60078
/* [RW 10] Write client 0: Assert pause threshold. Not Functional */
#define BRB1_REG_PAUSE_LOW_THRESHOLD_0                           0x60068
/* [R 24] The number of full blocks occpied by port. */
#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0                           0x60094
/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
#define CCM_REG_CAM_OCCUP                                        0xd0188
/* [RW 11] Interrupt mask register #0 read/write */
#define CCM_REG_CCM_INT_MASK                                     0xd01e4
/* [R 11] Interrupt register #0 read */
#define CCM_REG_CCM_INT_STS                                      0xd01d8
/* [RC 11] Interrupt register #0 read clear */
#define CCM_REG_CCM_INT_STS_CLR                                  0xd01dc
/* [RW 27] Parity mask register #0 read/write */
#define CCM_REG_CCM_PRTY_MASK                                    0xd01f4
/* [R 27] Parity register #0 read */
#define CCM_REG_CCM_PRTY_STS                                     0xd01e8
/* [RC 27] Parity register #0 read clear */
#define CCM_REG_CCM_PRTY_STS_CLR                                 0xd01ec
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 1 at start-up.
 */
#define CCM_REG_CFC_INIT_CRD                                     0xd0204
/* [RW 6] QM output initial credit. Max credit available - 32. Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 32 at start-up.
 */
#define CCM_REG_CQM_INIT_CRD                                     0xd020c
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the SDM interface is detected.
 */
#define CCM_REG_CSDM_LENGTH_MIS                                  0xd0170
/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define CCM_REG_FIC0_INIT_CRD                                    0xd0210
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define CCM_REG_FIC1_INIT_CRD                                    0xd0214
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the pbf interface is detected.
 */
#define CCM_REG_PBF_LENGTH_MIS                                   0xd0180
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the STORM interface is detected.
 */
#define CCM_REG_STORM_LENGTH_MIS                                 0xd016c
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the tsem interface is detected.
 */
#define CCM_REG_TSEM_LENGTH_MIS                                  0xd0174
/* [RC 1] Set when message length mismatch (relative to last indication) at
 * the usem interface is detected.
 */
#define CCM_REG_USEM_LENGTH_MIS                                  0xd017c
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the xsem interface is detected.
 */
#define CCM_REG_XSEM_LENGTH_MIS                                  0xd0178
/* [RW 19] Indirect access to the descriptor table of the XX protection
 * mechanism. The fields are: [5:0] - message length; [12:6] - message
 * pointer; 18:13] - next pointer.
 */
#define CCM_REG_XX_DESCR_TABLE                                   0xd0300
#define CCM_REG_XX_DESCR_TABLE_SIZE                              24
/* [R 7] Used to read the value of XX protection Free counter. */
#define CCM_REG_XX_FREE                                          0xd0184
#define CDU_REG_CDU_GLOBAL_PARAMS                                0x101020
/* [RW 7] Interrupt mask register #0 read/write */
#define CDU_REG_CDU_INT_MASK                                     0x10103c
/* [R 7] Interrupt register #0 read */
#define CDU_REG_CDU_INT_STS                                      0x101030
/* [RC 7] Interrupt register #0 read clear */
#define CDU_REG_CDU_INT_STS_CLR                                  0x101034
/* [RW 5] Parity mask register #0 read/write */
#define CDU_REG_CDU_PRTY_MASK                                    0x10104c
/* [R 5] Parity register #0 read */
#define CDU_REG_CDU_PRTY_STS                                     0x101040
/* [RC 5] Parity register #0 read clear */
#define CDU_REG_CDU_PRTY_STS_CLR                                 0x101044
/* [RW 32] logging of error data in case of a CDU load error:
 * {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
 * ype_error; ctual_active; ctual_compressed_context};
 */
#define CDU_REG_ERROR_DATA                                       0x101014
/* [RW 13] activity counter ram access */
#define CFC_REG_ACTIVITY_COUNTER                                 0x104400
#define CFC_REG_ACTIVITY_COUNTER_SIZE                            256
/* [R 1] indication the initializing the activity counter by the hardware
 * was done.
 */
#define CFC_REG_AC_INIT_DONE                                     0x104078
/* [R 1] indication the initializing the cams by the hardware was done. */
#define CFC_REG_CAM_INIT_DONE                                    0x10407c
/* [RW 2] Interrupt mask register #0 read/write */
#define CFC_REG_CFC_INT_MASK                                     0x104108
/* [R 2] Interrupt register #0 read */
#define CFC_REG_CFC_INT_STS                                      0x1040fc
/* [RC 2] Interrupt register #0 read clear */
#define CFC_REG_CFC_INT_STS_CLR                                  0x104100
/* [RW 6] Parity mask register #0 read/write */
#define CFC_REG_CFC_PRTY_MASK                                    0x104118
/* [R 6] Parity register #0 read */
#define CFC_REG_CFC_PRTY_STS                                     0x10410c
/* [RC 6] Parity register #0 read clear */
#define CFC_REG_CFC_PRTY_STS_CLR                                 0x104110
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
#define CFC_REG_CID_CAM                                          0x104800
#define CFC_REG_DEBUG0                                           0x104050
/* [R 16] CFC error vector. when the CFC detects an internal error it will
 * set one of these bits. the bit description can be found in CFC
 * specifications
 */
#define CFC_REG_ERROR_VECTOR                                     0x10403c
/* [WB 97] LCID info ram access = {96-vpf; 5:93-pfid; 2:89-type;
 * 8:85-action; 4-paddrv; 3:20-paddr; 9:4-rstates; -lsf; :0-lstate}
 */
#define CFC_REG_INFO_RAM                                         0x105000
#define CFC_REG_INFO_RAM_SIZE                                    1024
#define CFC_REG_INIT_REG                                         0x10404c
/* [RW 22] Link List ram access; data = {prev_pfid; rev_lcid; ext_pfid;
 * ext_lcid}
 */
#define CFC_REG_LINK_LIST                                        0x104c00
#define CFC_REG_LINK_LIST_SIZE                                   256
/* [R 1] indication the initializing the link list by the hardware was done. */
#define CFC_REG_LL_INIT_DONE                                     0x104074
/* [R 9] Number of allocated LCIDs which are at empty state */
#define CFC_REG_NUM_LCIDS_ALLOC                                  0x104020
/* [R 9] Number of Arriving LCIDs in Link List Block */
#define CFC_REG_NUM_LCIDS_ARRIVING                               0x104004
#define CFC_REG_NUM_LCIDS_INSIDE_PF                              0x104120
/* [R 9] Number of Leaving LCIDs in Link List Block */
#define CFC_REG_NUM_LCIDS_LEAVING                                0x104018
#define CFC_REG_STRONG_ENABLE_PF                                 0x104128
#define CFC_REG_WEAK_ENABLE_PF                                   0x104124
/* [RW 32] Interrupt mask register #0 read/write */
#define CSDM_REG_CSDM_INT_MASK_0                                 0xc229c
#define CSDM_REG_CSDM_INT_MASK_1                                 0xc22ac
/* [R 32] Interrupt register #0 read */
#define CSDM_REG_CSDM_INT_STS_0                                  0xc2290
#define CSDM_REG_CSDM_INT_STS_1                                  0xc22a0
/* [RC 32] Interrupt register #0 read clear */
#define CSDM_REG_CSDM_INT_STS_CLR_0                              0xc2294
#define CSDM_REG_CSDM_INT_STS_CLR_1                              0xc22a4
/* [RW 11] Parity mask register #0 read/write */
#define CSDM_REG_CSDM_PRTY_MASK                                  0xc22bc
/* [R 11] Parity register #0 read */
#define CSDM_REG_CSDM_PRTY_STS                                   0xc22b0
/* [RC 11] Parity register #0 read clear */
#define CSDM_REG_CSDM_PRTY_STS_CLR                               0xc22b4
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0xc2548
/* [R 1] parser fifo empty in sdm_sync block */
#define CSDM_REG_SYNC_PARSER_EMPTY                               0xc2550
/* [R 1] parser serial fifo empty in sdm_sync block */
#define CSDM_REG_SYNC_SYNC_EMPTY                                 0xc2558
/* [RW 32] Interrupt mask register #0 read/write */
#define CSEM_REG_CSEM_INT_MASK_0                                 0x200110
#define CSEM_REG_CSEM_INT_MASK_1                                 0x200120
/* [R 32] Interrupt register #0 read */
#define CSEM_REG_CSEM_INT_STS_0                                  0x200104
#define CSEM_REG_CSEM_INT_STS_1                                  0x200114
/* [RC 32] Interrupt register #0 read clear */
#define CSEM_REG_CSEM_INT_STS_CLR_0                              0x200108
#define CSEM_REG_CSEM_INT_STS_CLR_1                              0x200118
/* [RW 32] Parity mask register #0 read/write */
#define CSEM_REG_CSEM_PRTY_MASK_0                                0x200130
#define CSEM_REG_CSEM_PRTY_MASK_1                                0x200140
/* [R 32] Parity register #0 read */
#define CSEM_REG_CSEM_PRTY_STS_0                                 0x200124
#define CSEM_REG_CSEM_PRTY_STS_1                                 0x200134
/* [RC 32] Parity register #0 read clear */
#define CSEM_REG_CSEM_PRTY_STS_CLR_0                             0x200128
#define CSEM_REG_CSEM_PRTY_STS_CLR_1                             0x200138
/* [RW 32] This address space contains all registers and memories that are
 * placed in SEM_FAST block. The SEM_FAST registers are described in
 * appendix B. In order to access the SEM_FAST registers the base address
 * CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each
 * SEM_FAST register offset.
 */
#define CSEM_REG_FAST_MEMORY                                     0x220000
/* [RW 15] Interrupt table Read and write access to it is not possible in
 * the middle of the work
 */
#define CSEM_REG_INT_TABLE                                       0x200400
/* [WB 128] Debug only. Passive buffer memory */
#define CSEM_REG_PASSIVE_BUFFER                                  0x202000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define CSEM_REG_PRAM                                            0x240000
/* [R 20] Valid sleeping threads indication have bit per thread */
#define CSEM_REG_SLEEP_THREADS_VALID                             0x20026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define CSEM_REG_SLOW_EXT_STORE_EMPTY                            0x2002a0
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
 */
#define CSEM_REG_VFPF_ERR_NUM                                    0x200380
/* [RW 2] Interrupt mask register #0 read/write */
#define DBG_REG_DBG_INT_MASK                                     0xc098
/* [R 2] Interrupt register #0 read */
#define DBG_REG_DBG_INT_STS                                      0xc08c
/* [RC 2] Interrupt register #0 read clear */
#define DBG_REG_DBG_INT_STS_CLR                                  0xc090
/* [RW 1] Parity mask register #0 read/write */
#define DBG_REG_DBG_PRTY_MASK                                    0xc0a8
/* [R 1] Parity register #0 read */
#define DBG_REG_DBG_PRTY_STS                                     0xc09c
/* [RC 1] Parity register #0 read clear */
#define DBG_REG_DBG_PRTY_STS_CLR                                 0xc0a0
/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
 * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID = 0;
 * 4.Completion function=0; 5.Error handling = 0
 */
#define DMAE_REG_BACKWARD_COMP_EN                                0x10207c
/* [RW 32] Commands memory. The address to command X; row Y is to calculated
 * as 14 * X+Y.
 */
#define DMAE_REG_CMD_MEM                                         0x102400
#define DMAE_REG_CMD_MEM_SIZE                                    224
/* [RW 2] Interrupt mask register #0 read/write */
#define DMAE_REG_DMAE_INT_MASK                                   0x102054
/* [R 2] Interrupt register #0 read */
#define DMAE_REG_DMAE_INT_STS                                    0x102048
/* [RC 2] Interrupt register #0 read clear */
#define DMAE_REG_DMAE_INT_STS_CLR                                0x10204c
/* [RW 4] Parity mask register #0 read/write */
#define DMAE_REG_DMAE_PRTY_MASK                                  0x102064
/* [R 4] Parity register #0 read */
#define DMAE_REG_DMAE_PRTY_STS                                   0x102058
/* [RC 4] Parity register #0 read clear */
#define DMAE_REG_DMAE_PRTY_STS_CLR                               0x10205c
/* [RW 1] Command 0 go. */
#define DMAE_REG_GO_C0                                           0x102080
/* [RW 1] Command 1 go. */
#define DMAE_REG_GO_C1                                           0x102084
/* [RW 1] Command 10 go. */
#define DMAE_REG_GO_C10                                          0x102088
/* [RW 1] Command 11 go. */
#define DMAE_REG_GO_C11                                          0x10208c
/* [RW 1] Command 12 go. */
#define DMAE_REG_GO_C12                                          0x102090
/* [RW 1] Command 13 go. */
#define DMAE_REG_GO_C13                                          0x102094
/* [RW 1] Command 14 go. */
#define DMAE_REG_GO_C14                                          0x102098
/* [RW 1] Command 15 go. */
#define DMAE_REG_GO_C15                                          0x10209c
/* [RW 1] Command 2 go. */
#define DMAE_REG_GO_C2                                           0x1020a0
/* [RW 1] Command 3 go. */
#define DMAE_REG_GO_C3                                           0x1020a4
/* [RW 1] Command 4 go. */
#define DMAE_REG_GO_C4                                           0x1020a8
/* [RW 1] Command 5 go. */
#define DMAE_REG_GO_C5                                           0x1020ac
/* [RW 1] Command 6 go. */
#define DMAE_REG_GO_C6                                           0x1020b0
/* [RW 1] Command 7 go. */
#define DMAE_REG_GO_C7                                           0x1020b4
/* [RW 1] Command 8 go. */
#define DMAE_REG_GO_C8                                           0x1020b8
/* [RW 1] Command 9 go. */
#define DMAE_REG_GO_C9                                           0x1020bc
/* [RW 32] Doorbell address for RBC doorbells (function 0). */
#define DORQ_REG_DB_ADDR0                                        0x17008c
/* [RW 6] Interrupt mask register #0 read/write */
#define DORQ_REG_DORQ_INT_MASK                                   0x170180
/* [R 6] Interrupt register #0 read */
#define DORQ_REG_DORQ_INT_STS                                    0x170174
/* [RC 6] Interrupt register #0 read clear */
#define DORQ_REG_DORQ_INT_STS_CLR                                0x170178
/* [RW 2] Parity mask register #0 read/write */
#define DORQ_REG_DORQ_PRTY_MASK                                  0x170190
/* [R 2] Parity register #0 read */
#define DORQ_REG_DORQ_PRTY_STS                                   0x170184
/* [RC 2] Parity register #0 read clear */
#define DORQ_REG_DORQ_PRTY_STS_CLR                               0x170188
/* [R 13] Current value of the DQ FIFO fill level according to following
 * pointer. The range is 0 - 256 FIFO rows; where each row stands for the
 * doorbell.
 */
#define DORQ_REG_DQ_FILL_LVLF                                    0x1700a4
/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
 * equal to full threshold; reset on full clear.
 */
#define DORQ_REG_DQ_FULL_ST                                      0x1700c0
#define DORQ_REG_MAX_RVFID_SIZE                                  0x1701ec
#define DORQ_REG_MODE_ACT                                        0x170008
/* [RW 5] The normal mode CID extraction offset. */
#define DORQ_REG_NORM_CID_OFST                                   0x17002c
#define DORQ_REG_PF_USAGE_CNT                                    0x1701d0
/* [R 4] Current value of response A counter credit. Initial credit is
 * configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
 * register.
 */
#define DORQ_REG_RSPA_CRD_CNT                                    0x1700ac
/* [R 4] Current value of response B counter credit. Initial credit is
 * configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
 * register.
 */
#define DORQ_REG_RSPB_CRD_CNT                                    0x1700b0
#define DORQ_REG_VF_NORM_CID_BASE                                0x1701a0
#define DORQ_REG_VF_NORM_CID_OFST                                0x1701f4
#define DORQ_REG_VF_NORM_CID_WND_SIZE                            0x1701a4
#define DORQ_REG_VF_NORM_VF_BASE                                 0x1701a8
/* [RW 10] VF type validation mask value */
#define DORQ_REG_VF_TYPE_MASK_0                                  0x170218
/* [RW 17] VF type validation Min MCID value */
#define DORQ_REG_VF_TYPE_MAX_MCID_0                              0x1702d8
/* [RW 17] VF type validation Max MCID value */
#define DORQ_REG_VF_TYPE_MIN_MCID_0                              0x170298
/* [RW 10] VF type validation comp value */
#define DORQ_REG_VF_TYPE_VALUE_0                                 0x170258
#define DORQ_REG_VF_USAGE_CNT                                    0x170320
#define DORQ_REG_VF_USAGE_CT_LIMIT                               0x170340
#define HC_CONFIG_0_REG_ATTN_BIT_EN_0                            (0x1 << 4)
#define HC_CONFIG_0_REG_BLOCK_DISABLE_0                          (0x1 << 0)
#define HC_CONFIG_0_REG_INT_LINE_EN_0                            (0x1 << 3)
#define HC_CONFIG_0_REG_MSI_ATTN_EN_0                            (0x1 << 7)
#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0                        (0x1 << 2)
#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0                          (0x1 << 1)
#define HC_CONFIG_1_REG_BLOCK_DISABLE_1                          (0x1 << 0)
#define HC_REG_AGG_INT_0                                         0x108050
#define HC_REG_ATTN_MSG0_ADDR_L                                  0x108018
#define HC_REG_ATTN_MSG1_ADDR_L                                  0x108020
#define HC_REG_COMMAND_REG                                       0x108180
#define HC_REG_CONFIG_0                                          0x108000
#define HC_REG_CONFIG_1                                          0x108004
/* [RW 7] Interrupt mask register #0 read/write */
#define HC_REG_HC_INT_MASK                                       0x108090
/* [R 7] Interrupt register #0 read */
#define HC_REG_HC_INT_STS                                        0x108084
/* [RC 7] Interrupt register #0 read clear */
#define HC_REG_HC_INT_STS_CLR                                    0x108088
/* [RW 3] Parity mask register #0 read/write */
#define HC_REG_HC_PRTY_MASK                                      0x1080a0
/* [R 3] Parity register #0 read */
#define HC_REG_HC_PRTY_STS                                       0x108094
/* [RC 3] Parity register #0 read clear */
#define HC_REG_HC_PRTY_STS_CLR                                   0x108098
#define HC_REG_INT_MASK                                          0x108108
#define HC_REG_LEADING_EDGE_0                                    0x108040
#define HC_REG_MAIN_MEMORY                                       0x108800
#define HC_REG_MAIN_MEMORY_SIZE                                  152
#define HC_REG_TRAILING_EDGE_0                                   0x108044
#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN             (0x1 << 1)
#define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE                 (0x1 << 0)
#define IGU_REG_ATTENTION_ACK_BITS                               0x130108
/* [R 4] Debug: attn_fsm */
#define IGU_REG_ATTN_FSM                                         0x130054
#define IGU_REG_ATTN_MSG_ADDR_H                                  0x13011c
#define IGU_REG_ATTN_MSG_ADDR_L                                  0x130120
/* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
 * 1-pending). [2:0] = PFID. Pending means attention message was sent; but
 * write done didn't receive.
 */
#define IGU_REG_ATTN_WRITE_DONE_PENDING                          0x130030
#define IGU_REG_BLOCK_CONFIGURATION                              0x130000
#define IGU_REG_COMMAND_REG_32LSB_DATA                           0x130124
#define IGU_REG_COMMAND_REG_CTRL                                 0x13012c
/* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit
 * is clear. The bits in this registers are set and clear via the producer
 * command. Data valid only in addresses 0-4. all the rest are zero.
 */
#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP                         0x130200
/* [R 5] Debug: ctrl_fsm */
#define IGU_REG_CTRL_FSM                                         0x130064
/* [R 1] data available for error memory. If this bit is clear do not red
 * from error_handling_memory.
 */
#define IGU_REG_ERROR_HANDLING_DATA_VALID                        0x130130
/* [RW 11] Interrupt mask register #0 read/write */
#define IGU_REG_IGU_INT_MASK                                     0x130098
/* [R 11] Interrupt register #0 read */
#define IGU_REG_IGU_INT_STS                                      0x13008c
/* [RC 11] Interrupt register #0 read clear */
#define IGU_REG_IGU_INT_STS_CLR                                  0x130090
/* [RW 11] Parity mask register #0 read/write */
#define IGU_REG_IGU_PRTY_MASK                                    0x1300a8
/* [R 11] Parity register #0 read */
#define IGU_REG_IGU_PRTY_STS                                     0x13009c
/* [RC 11] Parity register #0 read clear */
#define IGU_REG_IGU_PRTY_STS_CLR                                 0x1300a0
/* [R 4] Debug: int_handle_fsm */
#define IGU_REG_INT_HANDLE_FSM                                   0x130050
#define IGU_REG_LEADING_EDGE_LATCH                               0x130134
/* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid.
 * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF
 * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number);
 */
#define IGU_REG_MAPPING_MEMORY                                   0x131000
#define IGU_REG_MAPPING_MEMORY_SIZE                              136
#define IGU_REG_PBA_STATUS_LSB                                   0x130138
#define IGU_REG_PBA_STATUS_MSB                                   0x13013c
#define IGU_REG_PCI_PF_MSIX_EN                                   0x130144
#define IGU_REG_PCI_PF_MSIX_FUNC_MASK                            0x130148
#define IGU_REG_PCI_PF_MSI_EN                                    0x130140
/* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no
 * pending; 1 = pending. Pendings means interrupt was asserted; and write
 * done was not received. Data valid only in addresses 0-4. all the rest are
 * zero.
 */
#define IGU_REG_PENDING_BITS_STATUS                              0x130300
#define IGU_REG_PF_CONFIGURATION                                 0x130154
/* [RW 20] producers only. E2 mode: address 0-135 match to the mapping
 * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default
 * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod;
 * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode
 * - In backward compatible mode; for non default SB; each even line in the
 * memory holds the U producer and each odd line hold the C producer. The
 * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The
 * last 20 producers are for the DSB for each PF. each PF has five segments
 * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
 * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods;
 */
#define IGU_REG_PROD_CONS_MEMORY                                 0x132000
/* [R 3] Debug: pxp_arb_fsm */
#define IGU_REG_PXP_ARB_FSM                                      0x130068
/* [RW 6] Write one for each bit will reset the appropriate memory. When the
 * memory reset finished the appropriate bit will be clear. Bit 0 - mapping
 * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3
 * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics;
 */
#define IGU_REG_RESET_MEMORIES                                   0x130158
/* [R 4] Debug: sb_ctrl_fsm */
#define IGU_REG_SB_CTRL_FSM                                      0x13004c
#define IGU_REG_SB_INT_BEFORE_MASK_LSB                           0x13015c
#define IGU_REG_SB_INT_BEFORE_MASK_MSB                           0x130160
#define IGU_REG_SB_MASK_LSB                                      0x130164
#define IGU_REG_SB_MASK_MSB                                      0x130168
/* [RW 16] Number of command that were dropped without causing an interrupt
 * due to: read access for WO BAR address; or write access for RO BAR
 * address or any access for reserved address or PCI function error is set
 * and address is not MSIX; PBA or cleanup
 */
#define IGU_REG_SILENT_DROP                                      0x13016c
/* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 -
 * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per
 * PF; 68-71 number of ATTN messages per PF
 */
#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT                       0x130800
#define IGU_REG_TRAILING_EDGE_LATCH                              0x130104
#define IGU_REG_VF_CONFIGURATION                                 0x130170
/* [WB_R 32] Each bit represent write done pending bits status for that SB
 * (MSI/MSIX message was sent and write done was not received yet). 0 =
 * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero.
 */
#define IGU_REG_WRITE_DONE_PENDING                               0x130480
#define MCP_A_REG_MCPR_SCRATCH                                   0x3a0000
#define MCP_REG_MCPR_ACCESS_LOCK                                 0x8009c
#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER                         0x8501c
#define MCP_REG_MCPR_GP_INPUTS                                   0x800c0
#define MCP_REG_MCPR_GP_OENABLE                                  0x800c8
#define MCP_REG_MCPR_GP_OUTPUTS                                  0x800c4
#define MCP_REG_MCPR_IMC_COMMAND                                 0x85900
#define MCP_REG_MCPR_IMC_DATAREG0                                0x85920
#define MCP_REG_MCPR_IMC_SLAVE_CONTROL                           0x85904
#define MCP_REG_MCPR_NVM_ACCESS_ENABLE                           0x86424
#define MCP_REG_MCPR_NVM_ADDR                                    0x8640c
#define MCP_REG_MCPR_NVM_CFG4                                    0x8642c
#define MCP_REG_MCPR_NVM_COMMAND                                 0x86400
#define MCP_REG_MCPR_NVM_READ                                    0x86410
#define MCP_REG_MCPR_NVM_SW_ARB                                  0x86420
#define MCP_REG_MCPR_NVM_WRITE                                   0x86408
#define MCP_REG_MCPR_SCRATCH                                     0xa0000
#define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK             (0x1 << 1)
#define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK             (0x1 << 0)
/* [R 32] read first 32 bit after inversion of function 0. mapped as
 * follows: [0] NIG attention for function0; [1] NIG attention for
 * function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
 * [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
 * GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
 * glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
 * [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
 * MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
 * Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
 * interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
 * error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
 * interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30]
 * PBClient Parity error; [31] PBClient Hw interrupt;
 */
#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0                       0xa42c
#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1                       0xa430
/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
 * NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
 * mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
 * [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
 * PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
 * function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
 * Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
 * mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
 * BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
 * Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
 * interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
 * Parity error; [29] TSEMI Hw interrupt; [30] PBClient Parity error; [31]
 * PBClient Hw interrupt;
 */
#define MISC_REG_AEU_AFTER_INVERT_1_MCP                          0xa434
/* [R 32] read second 32 bit after inversion of function 0. mapped as
 * follows: [0] PBF Parity error; [1] PBF Hw interrupt; [2] QM Parity error;
 * [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
 * [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
 * XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
 * DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
 * error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
 * PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
 * [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
 * [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
 * [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
 * [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt;
 */
#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0                       0xa438
#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1                       0xa43c
/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
 * PBF Parity error; [1] PBF Hw interrupt; [2] QM Parity error; [3] QM Hw
 * interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
 * Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
 * interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
 * DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
 * error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
 * PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
 * [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
 * [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
 * [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
 * [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt;
 */
#define MISC_REG_AEU_AFTER_INVERT_2_MCP                          0xa440
/* [R 32] read third 32 bit after inversion of function 0. mapped as
 * follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
 * error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
 * PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
 * interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
 * error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
 * Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
 * pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
 * MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
 * SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
 * timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
 * func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
 * attn1;
 */
#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0                       0xa444
#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1                       0xa448
/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
 * CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
 * Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
 * Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
 * error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
 * interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
 * MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
 * Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
 * timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
 * func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
 * func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
 * timers attn_4 func1; [30] General attn0; [31] General attn1;
 */
#define MISC_REG_AEU_AFTER_INVERT_3_MCP                          0xa44c
/* [R 32] read fourth 32 bit after inversion of function 0. mapped as
 * follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
 * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
 * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
 * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
 * [14] General attn16; [15] General attn17; [16] General attn18; [17]
 * General attn19; [18] General attn20; [19] General attn21; [20] Main power
 * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
 * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
 * Latched timeout attention; [27] GRC Latched reserved access attention;
 * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
 * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
 */
#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0                       0xa450
#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1                       0xa454
/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
 * General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
 * [4] General attn6; [5] General attn7; [6] General attn8; [7] General
 * attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
 * General attn13; [12] General attn14; [13] General attn15; [14] General
 * attn16; [15] General attn17; [16] General attn18; [17] General attn19;
 * [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
 * RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
 * RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
 * attention; [27] GRC Latched reserved access attention; [28] MCP Latched
 * rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
 * ump_tx_parity; [31] MCP Latched scpad_parity;
 */
#define MISC_REG_AEU_AFTER_INVERT_4_MCP                          0xa458
/* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as
 * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
 * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
 * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
 * parity; [31-10] Reserved;
 */
#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0                       0xa700
/* [W 14] write to this register results with the clear of the latched
 * signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
 * d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
 * latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
 * GRC Latched reserved access attention; one in d7 clears Latched
 * rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
 * Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
 * ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
 * pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
 * from this register return zero
 */
#define MISC_REG_AEU_CLR_LATCH_SIGNAL                            0xa45c
/* [RW 32] first 32b for enabling the output for function 0 output0. mapped
 * as follows: [0] NIG attention for function0; [1] NIG attention for
 * function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
 * 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
 * GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
 * function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
 * Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
 * SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
 * indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
 * [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
 * SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
 * TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
 * TSEMI Hw interrupt; [30] PBClient Parity error; [31] PBClient Hw
 * interrupt;
 */
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0                        0xa06c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1                        0xa07c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2                        0xa08c
/* [RW 32] first 32b for enabling the output for function 1 output0. mapped
 * as follows: [0] NIG attention for function0; [1] NIG attention for
 * function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
 * 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
 * GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
 * function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
 * Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
 * SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
 * indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
 * [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
 * SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
 * TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
 * TSEMI Hw interrupt; [30] PBClient Parity error; [31] PBClient Hw
 * interrupt;
 */
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0                        0xa10c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1                        0xa11c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2                        0xa12c
/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
 * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
 * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
 * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
 * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
 * [14] General attn16; [15] General attn17; [16] General attn18; [17]
 * General attn19; [18] General attn20; [19] General attn21; [20] Main power
 * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
 * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
 * Latched timeout attention; [27] GRC Latched reserved access attention;
 * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
 * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
 */
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0                        0xa078
/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
 * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
 * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
 * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
 * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
 * [14] General attn16; [15] General attn17; [16] General attn18; [17]
 * General attn19; [18] General attn20; [19] General attn21; [20] Main power
 * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
 * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
 * Latched timeout attention; [27] GRC Latched reserved access attention;
 * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
 * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
 */
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0                        0xa118
/* [RW 32] fourth 32b for enabling the output for close the gate nig. Mapped
 * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
 * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
 * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
 * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
 * [14] General attn16; [15] General attn17; [16] General attn18; [17]
 * General attn19; [18] General attn20; [19] General attn21; [20] Main power
 * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
 * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
 * Latched timeout attention; [27] GRC Latched reserved access attention;
 * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
 * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
 */
#define MISC_REG_AEU_ENABLE4_NIG_0                               0xa0f8
#define MISC_REG_AEU_ENABLE4_NIG_1                               0xa198
/* [RW 32] fourth 32b for enabling the output for close the gate pxp. Mapped
 * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
 * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
 * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
 * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
 * [14] General attn16; [15] General attn17; [16] General attn18; [17]
 * General attn19; [18] General attn20; [19] General attn21; [20] Main power
 * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
 * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
 * Latched timeout attention; [27] GRC Latched reserved access attention;
 * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
 * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
 */
#define MISC_REG_AEU_ENABLE4_PXP_0                               0xa108
#define MISC_REG_AEU_ENABLE4_PXP_1                               0xa1a8
/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
 * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
 * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
 * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
 * parity; [31-10] Reserved;
 */
#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0                        0xa688
/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
 * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
 * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
 * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
 * parity; [31-10] Reserved;
 */
#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0                        0xa6b0
/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
 * 128 bit vector
 */
#define MISC_REG_AEU_GENERAL_ATTN_0                              0xa000
#define MISC_REG_AEU_GENERAL_ATTN_1                              0xa004
#define MISC_REG_AEU_GENERAL_ATTN_10                             0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11                             0xa02c
#define MISC_REG_AEU_GENERAL_ATTN_12                             0xa030
#define MISC_REG_AEU_GENERAL_ATTN_2                              0xa008
#define MISC_REG_AEU_GENERAL_ATTN_3                              0xa00c
#define MISC_REG_AEU_GENERAL_ATTN_4                              0xa010
#define MISC_REG_AEU_GENERAL_ATTN_5                              0xa014
#define MISC_REG_AEU_GENERAL_ATTN_6                              0xa018
#define MISC_REG_AEU_GENERAL_ATTN_7                              0xa01c
#define MISC_REG_AEU_GENERAL_ATTN_8                              0xa020
#define MISC_REG_AEU_GENERAL_ATTN_9                              0xa024
#define MISC_REG_AEU_GENERAL_MASK                                0xa61c
/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
 * [9:8] = reserved. 0 = mask; 1 = unmask
 */
#define MISC_REG_AEU_MASK_ATTN_FUNC_0                            0xa060
#define MISC_REG_AEU_MASK_ATTN_FUNC_1                            0xa064
/* [RW 1] If set a system kill occurred. Reset on POR reset. */
#define MISC_REG_AEU_SYS_KILL_OCCURRED                           0xa610
/* [RW 32] Represent the status of the input vector to the AEU when a system
 * kill occurred. The register is reset in por reset. Mapped as follows: [0]
 * NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
 * mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
 * [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
 * PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
 * function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
 * Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
 * mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
 * BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
 * Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
 * interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
 * Parity error; [29] TSEMI Hw interrupt; [30] PBClient Parity error; [31]
 * PBClient Hw interrupt. Reset on POR reset.
 */
#define MISC_REG_AEU_SYS_KILL_STATUS_0                           0xa600
#define MISC_REG_AEU_SYS_KILL_STATUS_1                           0xa604
#define MISC_REG_AEU_SYS_KILL_STATUS_2                           0xa608
#define MISC_REG_AEU_SYS_KILL_STATUS_3                           0xa60c
/* [R 32] This field indicates the type of the device. '0' - 2 Ports; '1' -
 * 1 Port. Global register.
 */
#define MISC_REG_BOND_ID                                         0xa400
/* [R 16] These bits indicate the part number for the chip. Global register. */
#define MISC_REG_CHIP_NUM                                        0xa408
/* [R 4] These bits indicate the base revision of the chip. This value
 * starts at 0x0 for the A0 tape-out and increments by one for each
 * all-layer tape-out. Global register.
 */
#define MISC_REG_CHIP_REV                                        0xa40c
/* [R 14] otp_misc_do[100:0] spare bits collection: 13:11-
 * otp_misc_do[100:98]; 10:7 - otp_misc_do[87:84]; 6:3 - otp_misc_do[75:72];
 * 2:1 - otp_misc_do[51:50]; 0 - otp_misc_do[1].
 */
#define MISC_REG_CHIP_TYPE                                       0xac60
#define MISC_REG_CHIP_TYPE_57811_MASK                            (1 << 1)
#define MISC_REG_CPMU_LP_DR_ENABLE                               0xa858
/* [RW 1] FW EEE LPI Enable. When 1 indicates that EEE LPI mode is enabled
 * by FW. When 0 indicates that the EEE LPI mode is disabled by FW. Clk
 * 25MHz. Reset on hard reset.
 */
#define MISC_REG_CPMU_LP_FW_ENABLE_P0                            0xa84c
/* [RW 32] EEE LPI Idle Threshold. The threshold value for the idle EEE LPI
 * counter. Timer tick is 1 us. Clock 25MHz. Reset on hard reset.
 */
#define MISC_REG_CPMU_LP_IDLE_THR_P0                             0xa8a0
/* [RW 18] LPI entry events mask. [0] - Vmain SM Mask. When 1 indicates that
 * the Vmain SM end state is disabled. When 0 indicates that the Vmain SM
 * end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates that
 * the FW command that all Queues are empty is disabled. When 0 indicates
 * that the FW command that all Queues are empty is enabled. [2] - FW Early
 * Exit Mask / Reserved (Entry mask). When 1 indicates that the FW Early
 * Exit command is disabled. When 0 indicates that the FW Early Exit command
 * is enabled. This bit applicable only in the EXIT Events Mask registers.
 * [3] - PBF Request Mask. When 1 indicates that the PBF Request indication
 * is disabled. When 0 indicates that the PBF Request indication is enabled.
 * [4] - Tx Request Mask. When =1 indicates that the Tx other Than PBF
 * Request indication is disabled. When 0 indicates that the Tx Other Than
 * PBF Request indication is enabled. [5] - Rx EEE LPI Status Mask. When 1
 * indicates that the RX EEE LPI Status indication is disabled. When 0
 * indicates that the RX EEE LPI Status indication is enabled. In the EXIT
 * Events Masks registers; this bit masks the falling edge detect of the LPI
 * Status (Rx LPI is on - off). [6] - Tx Pause Mask. When 1 indicates that
 * the Tx Pause indication is disabled. When 0 indicates that the Tx Pause
 * indication is enabled. [7] - BRB1 Empty Mask. When 1 indicates that the
 * BRB1 EMPTY indication is disabled. When 0 indicates that the BRB1 EMPTY
 * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM
 * IDLE indication is disabled. When 0 indicates that the QM IDLE indication
 * is enabled. (One bit for both VOQ0 and VOQ1). [9] - QM LB Idle Mask. When
 * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0
 * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1
 * Status Mask. When 1 indicates that the L1 Status indication from the PCIE
 * CORE is disabled. When 0 indicates that the RX EEE LPI Status indication
 * from the PCIE CORE is enabled. In the EXIT Events Masks registers; this
 * bit masks the falling edge detect of the L1 status (L1 is on - off). [11]
 * - P0 E0 EEE EEE LPI REQ Mask. When =1 indicates that the P0 E0 EEE EEE
 * LPI REQ indication is disabled. When =0 indicates that the P0 E0 EEE LPI
 * REQ indication is enabled. [12] - P1 E0 EEE LPI REQ Mask. When =1
 * indicates that the P0 EEE LPI REQ indication is disabled. When =0
 * indicates that the P0 EEE LPI REQ indication is enabled. [13] - P0 E1 EEE
 * LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication is
 * disabled. When =0 indicates that the P0 EEE LPI REQ indication is
 * enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE
 * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
 * indication is enabled. [15] - L1 REQ Mask. When =1 indicates that the L1
 * REQ indication is disabled. When =0 indicates that the L1 indication is
 * enabled. [16] - Rx EEE LPI Status Edge Detect Mask. When =1 indicates
 * that the RX EEE LPI Status Falling Edge Detect indication is disabled (Rx
 * EEE LPI is on - off). When =0 indicates that the RX EEE LPI Status
 * Falling Edge Detec indication is enabled (Rx EEE LPI is on - off). This
 * bit is applicable only in the EXIT Events Masks registers. [17] - L1
 * Status Edge Detect Mask. When =1 indicates that the L1 Status Falling
 * Edge Detect indication from the PCIE CORE is disabled (L1 is on - off).
 * When =0 indicates that the L1 Status Falling Edge Detect indication from
 * the PCIE CORE is enabled (L1 is on - off). This bit is applicable only in
 * the EXIT Events Masks registers. Clock 25MHz. Reset on hard reset.
 */
#define MISC_REG_CPMU_LP_MASK_ENT_P0                             0xa880
/* [RW 18] EEE LPI exit events mask. [0] - Vmain SM Mask. When 1 indicates
 * that the Vmain SM end state is disabled. When 0 indicates that the Vmain
 * SM end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates
 * that the FW command that all Queues are empty is disabled. When 0
 * indicates that the FW command that all Queues are empty is enabled. [2] -
 * FW Early Exit Mask / Reserved (Entry mask). When 1 indicates that the FW
 * Early Exit command is disabled. When 0 indicates that the FW Early Exit
 * command is enabled. This bit applicable only in the EXIT Events Mask
 * registers. [3] - PBF Request Mask. When 1 indicates that the PBF Request
 * indication is disabled. When 0 indicates that the PBF Request indication
 * is enabled. [4] - Tx Request Mask. When =1 indicates that the Tx other
 * Than PBF Request indication is disabled. When 0 indicates that the Tx
 * Other Than PBF Request indication is enabled. [5] - Rx EEE LPI Status
 * Mask. When 1 indicates that the RX EEE LPI Status indication is disabled.
 * When 0 indicates that the RX LPI Status indication is enabled. In the
 * EXIT Events Masks registers; this bit masks the falling edge detect of
 * the EEE LPI Status (Rx EEE LPI is on - off). [6] - Tx Pause Mask. When 1
 * indicates that the Tx Pause indication is disabled. When 0 indicates that
 * the Tx Pause indication is enabled. [7] - BRB1 Empty Mask. When 1
 * indicates that the BRB1 EMPTY indication is disabled. When 0 indicates
 * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1
 * indicates that the QM IDLE indication is disabled. When 0 indicates that
 * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9]
 * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for
 * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for
 * LOOPBACK is enabled. [10] - L1 Status Mask. When 1 indicates that the L1
 * Status indication from the PCIE CORE is disabled. When 0 indicates that
 * the RX EEE LPI Status indication from the PCIE CORE is enabled. In the
 * EXIT Events Masks registers; this bit masks the falling edge detect of
 * the L1 status (L1 is on - off). [11] - P0 E0 EEE EEE LPI REQ Mask. When
 * =1 indicates that the P0 E0 EEE EEE LPI REQ indication is disabled. When
 * =0 indicates that the P0 E0 EEE LPI REQ indication is enabled. [12] - P1
 * E0 EEE LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication
 * is disabled. When =0 indicates that the P0 EEE LPI REQ indication is
 * enabled. [13] - P0 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE
 * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
 * indication is enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates
 * that the P0 EEE LPI REQ indication is disabled. When =0 indicates that
 * the P0 EEE LPI REQ indication is enabled. [15] - L1 REQ Mask. When =1
 * indicates that the L1 REQ indication is disabled. When =0 indicates that
 * the L1 indication is enabled. [16] - Rx EEE LPI Status Edge Detect Mask.
 * When =1 indicates that the RX EEE LPI Status Falling Edge Detect
 * indication is disabled (Rx EEE LPI is on - off). When =0 indicates that
 * the RX EEE LPI Status Falling Edge Detec indication is enabled (Rx EEE
 * LPI is on - off). This bit is applicable only in the EXIT Events Masks
 * registers. [17] - L1 Status Edge Detect Mask. When =1 indicates that the
 * L1 Status Falling Edge Detect indication from the PCIE CORE is disabled
 * (L1 is on - off). When =0 indicates that the L1 Status Falling Edge
 * Detect indication from the PCIE CORE is enabled (L1 is on - off). This
 * bit is applicable only in the EXIT Events Masks registers.Clock 25MHz.
 * Reset on hard reset.
 */
#define MISC_REG_CPMU_LP_MASK_EXT_P0                             0xa888
/* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number
 * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only
 * register. Reset on hard reset.
 */
#define MISC_REG_CPMU_LP_SM_ENT_CNT_P0                           0xa8b8
/* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number
 * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only
 * register. Reset on hard reset.
 */
#define MISC_REG_CPMU_LP_SM_ENT_CNT_P1                           0xa8bc
/* [RW 32] The following driver registers(1...16) represent 16 drivers and
 * 32 clients. Each client can be controlled by one driver only. One in each
 * bit represent that this driver control the appropriate client (Ex: bit 5
 * is set means this driver control client number 5). addr1 = set; addr0 =
 * clear; read from both addresses will give the same result = status. write
 * to address 1 will set a request to control all the clients that their
 * appropriate bit (in the write command) is set. if the client is free (the
 * appropriate bit in all the other drivers is clear) one will be written to
 * that driver register; if the client isn't free the bit will remain zero.
 * if the appropriate bit is set (the driver request to gain control on a
 * client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
 * interrupt will be asserted). write to address 0 will set a request to
 * free all the clients that their appropriate bit (in the write command) is
 * set. if the appropriate bit is clear (the driver request to free a client
 * it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
 * be asserted).
 */
#define MISC_REG_DRIVER_CONTROL_1                                0xa510
#define MISC_REG_DRIVER_CONTROL_7                                0xa3c8
/* [R 1] Status of four port mode path swap input pin. */
#define MISC_REG_FOUR_PORT_PATH_SWAP                             0xa75c
/* [RW 2] 4 port path swap overwrite.[0] - Overwrite control; if it is 0 -
 * the path_swap output is equal to 4 port mode path swap input pin; if it
 * is 1 - the path_swap output is equal to bit[1] of this register; [1] -
 * Overwrite value. If bit[0] of this register is 1 this is the value that
 * receives the path_swap output. Reset on Hard reset.
 */
#define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR                        0xa738
/* [R 1] Status of 4 port mode port swap input pin. */
#define MISC_REG_FOUR_PORT_PORT_SWAP                             0xa754
/* [RW 2] 4 port port swap overwrite.[0] - Overwrite control; if it is 0 -
 * the port_swap output is equal to 4 port mode port swap input pin; if it
 * is 1 - the port_swap output is equal to bit[1] of this register; [1] -
 * Overwrite value. If bit[0] of this register is 1 this is the value that
 * receives the port_swap output. Reset on Hard reset.
 */
#define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR                        0xa734
/* [RW 32] Debug only: spare RW register reset by core reset. Global
 * register. Reset on core reset.
 */
#define MISC_REG_GENERIC_CR_0                                    0xa460
#define MISC_REG_GENERIC_CR_1                                    0xa464
/* [RW 32] Debug only: spare RW register reset by por reset. Global
 * register. Reset on POR reset.
 */
#define MISC_REG_GENERIC_POR_1                                   0xa474
/* [RW 32] Bit[0]: EPIO MODE SEL: Setting this bit to 1 will allow SW/FW to
 * use all of the 32 Extended GPIO pins. Without setting this bit; an EPIO
 * can not be configured as an output. Each output has its output enable in
 * the MCP register space; but this bit needs to be set to make use of that.
 * Bit[3:1] spare. Bit[4]: WCVTMON_PWRDN: Powerdown for Warpcore VTMON. When
 * set to 1 - Powerdown. Bit[5]: WCVTMON_RESETB: Reset for Warpcore VTMON.
 * When set to 0 - vTMON is in reset. Bit[6]: setting this bit will change
 * the i/o to an output and will drive the TimeSync output. Bit[31:7]:
 * spare. Global register. Reset by hard reset.
 */
#define MISC_REG_GEN_PURP_HWG                                    0xa9a0
/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
 * these bits is written as a '1'; the corresponding GPIO bit will turn off
 * it's drivers and become an input. This is the reset state of all GPIO
 * pins. The read value of these bits will be a '1' if that last command
 * (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
 * [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
 * as a '1'; the corresponding GPIO bit will drive low. The read value of
 * these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
 * this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
 * SET When any of these bits is written as a '1'; the corresponding GPIO
 * bit will drive high (if it has that capability). The read value of these
 * bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
 * bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
 * RO; These bits indicate the read value of each of the eight GPIO pins.
 * This is the result value of the pin; not the drive value. Writing these
 * bits will have not effect. Global register.
 */
#define MISC_REG_GPIO                                            0xa490
/* [RW 8] These bits enable the GPIO_INTs to signals event to the
 * IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
 * p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
 * [7] p1_gpio_3; Global register.
 */
#define MISC_REG_GPIO_EVENT_EN                                   0xa2bc
/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
 * '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
 * This will acknowledge an interrupt on the falling edge of corresponding
 * GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
 * Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
 * register. This will acknowledge an interrupt on the rising edge of
 * corresponding GPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
 * OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
 * value. When the ~INT_STATE bit is set; this bit indicates the OLD value
 * of the pin such that if ~INT_STATE is set and this bit is '0'; then the
 * interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
 * is '1'; then the interrupt is due to a high to low edge (reset value 0).
 * [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
 * current GPIO interrupt state for each GPIO pin. This bit is cleared when
 * the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
 * set when the GPIO input does not match the current value in #OLD_VALUE
 * (reset value 0). Global register.
 */
#define MISC_REG_GPIO_INT                                        0xa494
/* [R 28] this field hold the last information that caused reserved
 * attention. bits [19:0] - address; [22:20] function; [23] reserved;
 * [27:24] the master that caused the attention - according to the following
 * encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
 * dbu; 8 = dmae
 */
#define MISC_REG_GRC_RSV_ATTN                                    0xa3c0
/* [R 28] this field hold the last information that caused timeout
 * attention. bits [19:0] - address; [22:20] function; [23] reserved;
 * [27:24] the master that caused the attention - according to the following
 * encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
 * dbu; 8 = dmae
 */
#define MISC_REG_GRC_TIMEOUT_ATTN                                0xa3c4
/* [R 10] Holds the last FID that caused timeout attention. Need to be used
 * in conjunction with ~misc_registers_timeout_attn; where 3 bits of
 * function (3 lsb) are also represented. Bit[2:0] - PFID; bit[3] - VFID
 * valid; bit[9:4] - VFID. Global register.
 */
#define MISC_REG_GRC_TIMEOUT_ATTN_FULL_FID                       0xa714
/* [RW 1] LCPLL power down. Global register. Active High. Reset on POR
 * reset.
 */
#define MISC_REG_LCPLL_E40_PWRDWN                                0xaa74
/* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */
#define MISC_REG_LCPLL_E40_RESETB_ANA                            0xaa78
/* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR
 * reset.
 */
#define MISC_REG_LCPLL_E40_RESETB_DIG                            0xaa7c
/* [RW 8] Interrupt mask register #0 read/write */
#define MISC_REG_MISC_INT_MASK                                   0xa388
/* [R 8] Interrupt register #0 read */
#define MISC_REG_MISC_INT_STS                                    0xa37c
/* [RC 8] Interrupt register #0 read clear */
#define MISC_REG_MISC_INT_STS_CLR                                0xa380
/* [RW 1] Parity mask register #0 read/write */
#define MISC_REG_MISC_PRTY_MASK                                  0xa398
/* [R 1] Parity register #0 read */
#define MISC_REG_MISC_PRTY_STS                                   0xa38c
/* [RC 1] Parity register #0 read clear */
#define MISC_REG_MISC_PRTY_STS_CLR                               0xa390
/* [R 1] If set indicate that the pcie_rst_b was asserted without perst
 * assertion. Global register.
 */
#define MISC_REG_PCIE_HOT_RESET                                  0xa618
/* [R 1] Status of 4 port mode enable input pin. */
#define MISC_REG_PORT4MODE_EN                                    0xa750
/* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 -
 * the port4mode_en output is equal to 4 port mode input pin; if it is 1 -
 * the port4mode_en output is equal to bit[1] of this register; [1] -
 * Overwrite value. If bit[0] of this register is 1 this is the value that
 * receives the port4mode_en output. Reset on Hard reset.
 */
#define MISC_REG_PORT4MODE_EN_OVWR                               0xa720
/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset;
 * write/read zero = the specific block is in reset; addr 0-wr- the write
 * value will be written to the register; addr 1-set - one will be written
 * to all the bits that have the value of one in the data written (bits that
 * have the value of zero will not be change) ; addr 2-clear - zero will be
 * written to all the bits that have the value of one in the data written
 * (bits that have the value of zero will not be change); addr 3-ignore;
 * read ignore from all addr except addr 00; inside order of the bits is:
 * [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5]
 * rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10]
 * rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15]
 * rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20]
 * rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25]
 * rst_cfc; [26] rst_pxp_hst; [27] rst_pxpv (global register); [28]
 * rst_rbcp; [29] rst_hc; [30] rst_dmae; [31] rst_semi_rtc;
 */
#define MISC_REG_RESET_REG_1                                     0xa580
#define MISC_REG_RESET_REG_2                                     0xa590
/* [RW 22] 22 bit GRC address where the scratch-pad of the MCP that is
 * shared with the driver resides
 */
#define MISC_REG_SHARED_MEM_ADDR                                 0xa2b4
/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
 * the corresponding SPIO bit will turn off it's drivers and become an
 * input. This is the reset state of all SPIO pins. The read value of these
 * bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
 * bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
 * is written as a '1'; the corresponding SPIO bit will drive low. The read
 * value of these bits will be a '1' if that last command (#SET; #CLR; or
 * #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
 * these bits is written as a '1'; the corresponding SPIO bit will drive
 * high (if it has that capability). The read value of these bits will be a
 * '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
 * (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
 * each of the eight SPIO pins. This is the result value of the pin; not the
 * drive value. Writing these bits will have not effect. Each 8 bits field
 * is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
 * from VAUX. (This is an output pin only; the FLOAT field is not applicable
 * for this pin); [1] VAUX Disable; when pulsed low; disables supply form
 * VAUX. (This is an output pin only; FLOAT field is not applicable for this
 * pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
 * select VAUX supply. (This is an output pin only; it is not controlled by
 * the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
 * field is not applicable for this pin; only the VALUE fields is relevant -
 * it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
 * Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
 * device ID select; read by UMP firmware. Global register.
 */
#define MISC_REG_SPIO                                            0xa4fc
/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
 * according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
 * [7:6] reserved. Global register.
 */
#define MISC_REG_SPIO_EVENT_EN                                   0xa2b8
/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
 * corresponding bit in the #OLD_VALUE register. This will acknowledge an
 * interrupt on the falling edge of corresponding SPIO input (reset value
 * 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
 * in the #OLD_VALUE register. This will acknowledge an interrupt on the
 * rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
 * RO; These bits indicate the old value of the SPIO input value. When the
 * ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
 * that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
 * to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
 * interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
 * RO; These bits indicate the current SPIO interrupt state for each SPIO
 * pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
 * command bit is written. This bit is set when the SPIO input does not
 * match the current value in #OLD_VALUE (reset value 0). Global register.
 */
#define MISC_REG_SPIO_INT                                        0xa500
/* [R 1] Status of two port mode path swap input pin. */
#define MISC_REG_TWO_PORT_PATH_SWAP                              0xa758
/* [RW 2] 2 port swap overwrite.[0] - Overwrite control; if it is 0 - the
 * path_swap output is equal to 2 port mode path swap input pin; if it is 1
 * - the path_swap output is equal to bit[1] of this register; [1] -
 * Overwrite value. If bit[0] of this register is 1 this is the value that
 * receives the path_swap output. Reset on Hard reset.
 */
#define MISC_REG_TWO_PORT_PATH_SWAP_OVWR                         0xa72c
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
 * loaded; 0-prepare; -unprepare. Global register. Reset on hard reset.
 */
#define MISC_REG_UNPREPARED                                      0xa424
/* [RW 5] MDIO PHY Address. The WC uses this address to determine whether or
 * not it is the recipient of the message on the MDIO interface. The value
 * is compared to the value on ctrl_md_devad. Drives output
 * misc_xgxs0_phy_addr. Global register.
 */
#define MISC_REG_WC0_CTRL_PHY_ADDR                               0xa9cc
/* [RW 10] reset reg#3; rite/read one = the specific block is out of reset;
 * write/read zero = the specific block is in reset; addr 0-wr- the write
 * value will be written to the register; addr 1-set - one will be written
 * to all the bits that have the value of one in the data written (bits that
 * have the value of zero will not be change) ; addr 2-clear - zero will be
 * written to all the bits that have the value of one in the data written
 * (bits that have the value of zero will not be change); addr 3-ignore;
 * read ignore from all addr except addr 00. [0]: rstb_hw: Active low reset
 * which when asserted drives entire WC into the reset state. All flops
 * which within WC are driven into an initial state; as well as the analog
 * core. Output clocks txck_out; rxck0_10g; and clk_25 will be driven to 0
 * upon its assertion. [1]: iddq. Enables iddq testing where the supply
 * current (Idd) is measured in the quiescent state. [2]: pwrdwn: Active
 * high control which forces the analog core of the WC into power-down mode;
 * and forces digital logic of the WC into reset. Output clock (refclk)
 * remains active. [3]: pwrdwn_sd: Power down signal detect. [4]:
 * txd10g_fifo_rstb: Transmit 10Gbps FIFO reset; active low. Used to reset
 * the transmit FIFO used in xlgmii operation. [8:5]: txd1g_fifo_rstb:
 * Transmit 1Gbps FIFO reset; active low. Used to reset the per-lane
 * transmit FIFOs used in the mii/gmii operation. [9]:
 * txd10g_fifo_rstb_dxgxs1: Transmit 10Gbps DXGXS FIFO reset; active low.
 * Used to reset the transmit FIFO used in the DXGXS logic in xlgmii
 * operation. Global register.
 */
#define MISC_REG_WC0_RESET                                       0xac30
/* [RW 2] XMAC Core port mode. Indicates the number of ports on the system
 * side. This should be less than or equal to phy_port_mode; if some of the
 * ports are not used. This enables reduction of frequency on the core side.
 * This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 -
 * Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap
 * input for the XMAC_MP core; and should be changed only while reset is
 * held low. Reset on Hard reset.
 */
#define MISC_REG_XMAC_CORE_PORT_MODE                             0xa964
/* [RW 2] XMAC PHY port mode. Indicates the number of ports on the Warp
 * Core. This is a strap input for the XMAC_MP core. 00 - Single Port Mode;
 * 01 - Dual Port Mode; 1x - Quad Port Mode; This is a strap input for the
 * XMAC_MP core; and should be changed only while reset is held low. Reset
 * on Hard reset.
 */
#define MISC_REG_XMAC_PHY_PORT_MODE                              0xa960
/* [RW 1] Interrupt mask register #0 read/write */
#define MSTAT_REG_MSTAT_INT_MASK                                 0x7fc
/* [R 1] Interrupt register #0 read */
#define MSTAT_REG_MSTAT_INT_STS                                  0x7f0
/* [RC 1] Interrupt register #0 read clear */
#define MSTAT_REG_MSTAT_INT_STS_CLR                              0x7f4
/* [RW 32] 1 [47] Packet Size = 64 Write to this register write bits 31:0.
 * Reads from this register will clear bits 31:0.
 */
#define MSTAT_REG_RX_STAT_GR64_LO                                0x200
/* [RW 32] 1 [00] Tx Good Packet Count Write to this register write bits
 * 31:0. Reads from this register will clear bits 31:0.
 */
#define MSTAT_REG_TX_STAT_GTXPOK_LO                              0
#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN                  (0x1 << 0)
#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN                  (0x1 << 0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT      (0x1 << 0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS    (0x1 << 9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G          (0x1 << 15)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS      (0xf << 18)
/* [R 1] Input enable for RX_BMAC0 IF */
#define NIG_REG_BMAC0_IN_EN                                      0x100ac
/* [R 1] output enable for TX_BMAC0 IF */
#define NIG_REG_BMAC0_OUT_EN                                     0x100e0
/* [R 1] output enable for TX BMAC pause port 0 IF */
#define NIG_REG_BMAC0_PAUSE_OUT_EN                               0x10110
/* [R 1] output enable for RX_BMAC0_REGS IF */
#define NIG_REG_BMAC0_REGS_OUT_EN                                0x100e8
/* [RW 1] output enable for RX BRB1 port0 IF */
#define NIG_REG_BRB0_OUT_EN                                      0x100f8
/* [RW 1] Input enable for TX BRB1 pause port 0 IF */
#define NIG_REG_BRB0_PAUSE_IN_EN                                 0x100c4
/* [RW 1] Input enable for TX BRB1 pause port 1 IF */
#define NIG_REG_BRB1_PAUSE_IN_EN                                 0x100c8
/* [WB_W 90] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
 * error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
 * 72:73]-vnic_num; 89:74]-sideband_info
 */
#define NIG_REG_DEBUG_PACKET_LB                                  0x10800
/* [R 1] FIFO empty in DEBUG_FIFO in NIG_TX_DBG */
#define NIG_REG_EGRESS_DEBUG_FIFO_EMPTY                          0x10418
/* [R 1] FIFO empty in DELAY_PBF_FIFO in NIG_RX_PORT0 */
#define NIG_REG_EGRESS_DELAY0_EMPTY                              0x10420
/* [R 1] FIFO empty in DELAY_PBF_FIFO in NIG_RX_PORT1 */
#define NIG_REG_EGRESS_DELAY1_EMPTY                              0x10428
/* [R 1] PBF FIFO empty flag. */
#define NIG_REG_EGRESS_DELAY2_EMPTY                              0x1862c
/* [R 1] PBF FIFO empty flag. */
#define NIG_REG_EGRESS_DELAY3_EMPTY                              0x18630
/* [R 1] PBF FIFO empty flag. */
#define NIG_REG_EGRESS_DELAY4_EMPTY                              0x18634
/* [R 1] PBF FIFO empty flag. */
#define NIG_REG_EGRESS_DELAY5_EMPTY                              0x18638
/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
 * packets from PBFare not forwarded to the MAC and just deleted from FIFO.
 * First packet may be deleted from the middle. And last packet will be
 * always deleted till the end.
 */
#define NIG_REG_EGRESS_DRAIN0_MODE                               0x10060
/* [R 1] Output enable to EMAC0 */
#define NIG_REG_EGRESS_EMAC0_OUT_EN                              0x10120
/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
 * to emac for port0; other way to bmac for port0
 */
#define NIG_REG_EGRESS_EMAC0_PORT                                0x10058
/* [R 1] FIFO empty in MNG_FIFO in NIG_TX_PORT0 */
#define NIG_REG_EGRESS_MNG0_FIFO_EMPTY                           0x10460
/* [R 1] FIFO empty in MNG_FIFO in NIG_TX_PORT1 */
#define NIG_REG_EGRESS_MNG1_FIFO_EMPTY                           0x10474
/* [RW 1] Input enable for TX UMP management packet port0 IF */
#define NIG_REG_EGRESS_UMP0_IN_EN                                0x100d4
/* [R 1] Input enable for RX_EMAC0 IF */
#define NIG_REG_EMAC0_IN_EN                                      0x100a4
/* [R 1] output enable for TX EMAC pause port 0 IF */
#define NIG_REG_EMAC0_PAUSE_OUT_EN                               0x10118
/* [R 1] status from emac0. This bit is set when MDINT from either the
 * EXT_MDINT pin or from the Copper PHY is driven low. This condition must
 * be cleared in the attached PHY device that is driving the MINT pin.
 */
#define NIG_REG_EMAC0_STATUS_MISC_MI_INT                         0x10494
/* [R 48] This address space contains BMAC0 registers. The BMAC registers
 * are described in appendix A. In order to access the BMAC0 registers; the
 * base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
 * added to each BMAC register offset
 */
#define NIG_REG_INGRESS_BMAC0_MEM                                0x10c00
/* [R 48] This address space contains BMAC1 registers. The BMAC registers
 * are described in appendix A. In order to access the BMAC0 registers; the
 * base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
 * added to each BMAC register offset
 */
#define NIG_REG_INGRESS_BMAC1_MEM                                0x11000
/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
#define NIG_REG_INGRESS_EOP_LB_EMPTY                             0x104e0
/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
 * packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16]
 */
#define NIG_REG_INGRESS_EOP_LB_FIFO                              0x104e4
/* [R 1] FIFO empty in EOP descriptor FIFO of port 0 in NIG_RX_EOP */
#define NIG_REG_INGRESS_EOP_PORT0_EMPTY                          0x104ec
/* [R 1] FIFO empty in EOP descriptor FIFO of port 1 in NIG_RX_EOP */
#define NIG_REG_INGRESS_EOP_PORT1_EMPTY                          0x104f8
/* [R 1] FIFO empty in PBF_DELAY_lb_FIFO in NIG_RX_lb */
#define NIG_REG_INGRESS_LB_PBF_DELAY_EMPTY                       0x10508
/* [R 1] FIFO empty in dscr_fifo in NIG_RX_RMP block */
#define NIG_REG_INGRESS_RMP0_DSCR_EMPTY                          0x10530
/* [R 1] FIFO empty in dscr_fifo in NIG_RX_RMP block */
#define NIG_REG_INGRESS_RMP1_DSCR_EMPTY                          0x10538
/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
 * logic for interrupts must be used. Enable per bit of interrupt of
 * ~latch_status.latch_status
 */
#define NIG_REG_LATCH_BC_0                                       0x16210
/* [RW 27] Latch for each interrupt from Unicore.b[0]
 * status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
 * b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
 * b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
 * b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
 * b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
 * b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
 * b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
 * b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
 * b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
 * b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
 * b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
 * b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs
 */
#define NIG_REG_LATCH_STATUS_0                                   0x18000
/* [RW 1] led 10g for port 0 */
#define NIG_REG_LED_10G_P0                                       0x10320
/* [RW 1] Port0: This bit is set to enable the use of the
 * ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
 * defined below. If this bit is cleared; then the blink rate will be about
 * 8Hz.
 */
#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0                    0x10318
/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
 * Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
 * is reset to 0x080; giving a default blink period of approximately 8Hz.
 */
#define NIG_REG_LED_CONTROL_BLINK_RATE_P0                        0x10310
/* [RW 1] Port0: If set along with the
 * s_led_control_override_traffic_p0.led_control_override_traffic_p0
 * bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
 * bit; the Traffic LED will blink with the blink rate specified in
 * ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
 * ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
 * fields.
 */
#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0                     0x10308
/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
 * Traffic LED will then be controlled via bit ~nig_registers_
 * led_control_traffic_p0.led_control_traffic_p0 and bit
 * ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0
 */
#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0                  0x102f8
/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
 * turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
 * set; the LED will blink with blink rate specified in
 * ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
 * ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
 * fields.
 */
#define NIG_REG_LED_CONTROL_TRAFFIC_P0                           0x10300
/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
 * 9-11PHY7; 12 MAC4; 13-15 PHY10;
 */
#define NIG_REG_LED_MODE_P0                                      0x102f0
/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
 * tsdm enable; b2- usdm enable
 */
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0                         0x16070
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1                         0x16074
/* [RW 1] SAFC enable for port0. This register may get 1 only when
 * ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
 * port
 */
#define NIG_REG_LLFC_ENABLE_0                                    0x16208
#define NIG_REG_LLFC_ENABLE_1                                    0x1620c
/* [RW 16] classes are high-priority for port0 */
#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0                     0x16058
#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1                     0x1605c
/* [RW 16] classes are low-priority for port0 */
#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0                      0x16060
#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1                      0x16064
/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
#define NIG_REG_LLFC_OUT_EN_0                                    0x160c8
#define NIG_REG_LLFC_OUT_EN_1                                    0x160cc
#define NIG_REG_LLH0_ACPI_PAT_0_CRC                              0x1015c
#define NIG_REG_LLH0_ACPI_PAT_6_LEN                              0x10154
#define NIG_REG_LLH0_BRB1_DRV_MASK                               0x10244
#define NIG_REG_LLH0_BRB1_DRV_MASK_MF                            0x16048
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
#define NIG_REG_LLH0_BRB1_NOT_MCP                                0x1025c
/* [RW 2] Determine the classification participants. 0: no classification.1:
 * classification upon VLAN id. 2: classification upon MAC address. 3:
 * classification upon both VLAN id & MAC addr.
 */
#define NIG_REG_LLH0_CLS_TYPE                                    0x16080
#define NIG_REG_LLH0_DEST_IP_0_1                                 0x101dc
#define NIG_REG_LLH0_DEST_MAC_0_0                                0x101c0
/* [RW 16] destination TCP address 1. The LLH will look for this address in
 * all incoming packets.
 */
#define NIG_REG_LLH0_DEST_TCP_0                                  0x10220
/* [RW 16] destination UDP address 1 The LLH will look for this address in
 * all incoming packets.
 */
#define NIG_REG_LLH0_DEST_UDP_0                                  0x10214
/* [R 1] FIFO empty in LLH port0 */
#define NIG_REG_LLH0_FIFO_EMPTY                                  0x10548
#define NIG_REG_LLH0_FUNC_EN                                     0x160fc
#define NIG_REG_LLH0_FUNC_MEM                                    0x16180
#define NIG_REG_LLH0_FUNC_MEM_ENABLE                             0x16140
#define NIG_REG_LLH0_FUNC_VLAN_ID                                0x16100
/* [RW 1] Determine the IP version to look for in
 * ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4
 */
#define NIG_REG_LLH0_IPV4_IPV6_0                                 0x10208
/* [RW 1] t bit for llh0 */
#define NIG_REG_LLH0_T_BIT                                       0x10074
/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
#define NIG_REG_LLH0_VLAN_ID_0                                   0x1022c
#define NIG_REG_LLH0_XCM_MASK                                    0x10130
#define NIG_REG_LLH1_BRB1_DRV_MASK_MF                            0x1604c
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
#define NIG_REG_LLH1_BRB1_NOT_MCP                                0x102dc
/* [RW 2] Determine the classification participants. 0: no classification.1:
 * classification upon VLAN id. 2: classification upon MAC address. 3:
 * classification upon both VLAN id & MAC addr.
 */
#define NIG_REG_LLH1_CLS_TYPE                                    0x16084
/* [R 1] FIFO empty in LLH port1 */
#define NIG_REG_LLH1_FIFO_EMPTY                                  0x10558
#define NIG_REG_LLH1_FUNC_EN                                     0x16104
#define NIG_REG_LLH1_FUNC_MEM                                    0x161c0
#define NIG_REG_LLH1_FUNC_MEM_ENABLE                             0x16160
#define NIG_REG_LLH1_FUNC_MEM_SIZE                               16
/* [RW 1] When this bit is set; the LLH will classify the packet before
 * sending it to the BRB or calculating WoL on it. This bit controls port 1
 * only. The legacy llh_multi_function_mode bit controls port 0.
 */
#define NIG_REG_LLH1_MF_MODE                                     0x18614
#define NIG_REG_LLH1_XCM_MASK                                    0x10134
/* [RW 1] When this bit is set; the LLH will expect all packets to be with
 * outer VLAN. This is not applicable to E2.
 */
#define NIG_REG_LLH_E1HOV_MODE                                   0x160d8
/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
 * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
 */
#define NIG_REG_LLH_E1HOV_TYPE_1                                 0x16028
/* [RW 1] When this bit is set; the LLH will classify the packet before
 * sending it to the BRB or calculating WoL on it. This bit is applicable to
 * both ports 0 and 1 for E2. This bit only controls port 0 in E3.
 */
#define NIG_REG_LLH_MF_MODE                                      0x16024
#define NIG_REG_MASK_INTERRUPT_PORT0                             0x10330
#define NIG_REG_MASK_INTERRUPT_PORT1                             0x10334
/* [R 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
#define NIG_REG_NIG_EMAC0_EN                                     0x1003c
/* [R 1] Output signal from NIG to TX_EMAC0. When set indicates to the EMAC0
 * to strip the CRC from the ingress packets.
 */
#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC                         0x10044
/* [RW 32] Interrupt mask register #0 read/write */
#define NIG_REG_NIG_INT_MASK_0                                   0x103bc
#define NIG_REG_NIG_INT_MASK_1                                   0x103cc
/* [R 32] Interrupt register #0 read */
#define NIG_REG_NIG_INT_STS_0                                    0x103b0
#define NIG_REG_NIG_INT_STS_1                                    0x103c0
/* [RC 32] Interrupt register #0 read clear */
#define NIG_REG_NIG_INT_STS_CLR_0                                0x103b4
#define NIG_REG_NIG_INT_STS_CLR_1                                0x103c4
/* [R 32] Legacy E1 and E1H location for parity error mask register. */
#define NIG_REG_NIG_PRTY_MASK                                    0x103dc
/* [RW 32] Parity mask register #0 read/write */
#define NIG_REG_NIG_PRTY_MASK_0                                  0x183c8
#define NIG_REG_NIG_PRTY_MASK_1                                  0x183d8
/* [R 32] Legacy E1 and E1H location for parity error status register. */
#define NIG_REG_NIG_PRTY_STS                                     0x103d0
/* [R 32] Parity register #0 read */
#define NIG_REG_NIG_PRTY_STS_0                                   0x183bc
#define NIG_REG_NIG_PRTY_STS_1                                   0x183cc
/* [R 32] Legacy E1 and E1H location for parity error status clear register. */
#define NIG_REG_NIG_PRTY_STS_CLR                                 0x103d4
/* [RC 32] Parity register #0 read clear */
#define NIG_REG_NIG_PRTY_STS_CLR_0                               0x183c0
#define NIG_REG_NIG_PRTY_STS_CLR_1                               0x183d0
/* [R 1] Indication that HBUF descriptor FIFO is empty. */
#define NIG_REG_P0_HBUF_DSCR_EMPTY                               0x18318
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
 * Ethernet header.
 */
#define NIG_REG_P0_HDRS_AFTER_BASIC                              0x18038
/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
 * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
 * disabled when this bit is set.
 */
#define NIG_REG_P0_HWPFC_ENABLE                                  0x18078
#define NIG_REG_P0_LLH_FUNC_MEM2                                 0x18480
/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
 * indicates the validity of the data in the buffer. Writing a 1 to bit 16
 * will clear the buffer.
 */
#define NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID                        0x1875c
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * the host. This location returns the lower 32 bits of timestamp value.
 */
#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB                       0x18754
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * the host. This location returns the upper 32 bits of timestamp value.
 */
#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB                       0x18758
/* [RW 11] Mask register for the various parameters used in determining PTP
 * packet presence. Set each bit to 1 to mask out the particular parameter.
 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
 * MAC DA 2. The reset default is set to mask out all parameters.
 */
#define NIG_REG_P0_LLH_PTP_PARAM_MASK                            0x187a0
/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
 * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
 * packets only and require that the packet is IPv4 for the rules to match.
 * Note that rules 4-7 are for IPv6 packets only and require that the packet
 * is IPv6 for the rules to match.
 */
#define NIG_REG_P0_LLH_PTP_RULE_MASK                             0x187a4
/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
#define NIG_REG_P0_LLH_PTP_TO_HOST                               0x187ac
/* [RW 1] Input enable for RX MAC interface. */
#define NIG_REG_P0_MAC_IN_EN                                     0x185ac
/* [RW 1] Output enable for TX MAC interface */
#define NIG_REG_P0_MAC_OUT_EN                                    0x185b0
/* [RW 1] Output enable for TX PAUSE signal to the MAC. */
#define NIG_REG_P0_MAC_PAUSE_OUT_EN                              0x185b4
/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
 * future expansion) each priority is to be mapped to. Bits 3:0 specify the
 * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
 * priority field is extracted from the outer-most VLAN in receive packet.
 * Only COS 0 and COS 1 are supported in E2.
 */
#define NIG_REG_P0_PKT_PRIORITY_TO_COS                           0x18054
/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
 * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
 * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
 * frame format in timesync event detection on RX side. Bit 3 enables
 * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
 * detection on TX side. Bit 5 enables V2 frame format in timesync event
 * detection on TX side. Note that for HW to detect PTP packet and extract
 * data from the packet, at least one of the version bits of that traffic
 * direction has to be enabled.
 */
#define NIG_REG_P0_PTP_EN                                        0x18788
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
 * priority is mapped to COS 0 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P0_RX_COS0_PRIORITY_MASK                         0x18058
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
 * priority is mapped to COS 1 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P0_RX_COS1_PRIORITY_MASK                         0x1805c
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A
 * priority is mapped to COS 2 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P0_RX_COS2_PRIORITY_MASK                         0x186b0
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 3. A
 * priority is mapped to COS 3 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P0_RX_COS3_PRIORITY_MASK                         0x186b4
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 4. A
 * priority is mapped to COS 4 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P0_RX_COS4_PRIORITY_MASK                         0x186b8
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 5. A
 * priority is mapped to COS 5 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P0_RX_COS5_PRIORITY_MASK                         0x186bc
/* [R 1] RX FIFO for receiving data from MAC is empty. */
#define NIG_REG_P0_RX_MACFIFO_EMPTY                              0x18570
/* [R 1] TLLH FIFO is empty. */
#define NIG_REG_P0_TLLH_FIFO_EMPTY                               0x18308
/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
 * indicates the validity of the data in the buffer. Bit 17 indicates that
 * the sequence ID is valid and it is waiting for the TX timestamp value.
 * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
 * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
 */
#define NIG_REG_P0_TLLH_PTP_BUF_SEQID                            0x187e0
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * MCP. This location returns the lower 32 bits of timestamp value.
 */
#define NIG_REG_P0_TLLH_PTP_BUF_TS_LSB                           0x187d8
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * MCP. This location returns the upper 32 bits of timestamp value.
 */
#define NIG_REG_P0_TLLH_PTP_BUF_TS_MSB                           0x187dc
/* [RW 11] Mask register for the various parameters used in determining PTP
 * packet presence. Set each bit to 1 to mask out the particular parameter.
 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
 * MAC DA 2. The reset default is set to mask out all parameters.
 */
#define NIG_REG_P0_TLLH_PTP_PARAM_MASK                           0x187f0
/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
 * default is to mask out all of the rules.
 */
#define NIG_REG_P0_TLLH_PTP_RULE_MASK                            0x187f4
/* [R 15] Specify which of the credit registers the client is to be mapped
 * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For
 * clients that are not subject to WFQ credit blocking - their
 * specifications here are not used.
 */
#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP                      0x180f0
/* [RW 32] Specify which of the credit registers the client is to be mapped
 * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
 * for client 0; bits [35:32] are for client 8. For clients that are not
 * subject to WFQ credit blocking - their specifications here are not used.
 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
 * input clients to ETS arbiter. The reset default is set for management and
 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
 * use credit registers 0-5 respectively (0x543210876). Note that credit
 * registers can not be shared between clients.
 */
#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB                 0x18688
/* [RW 4] Specify which of the credit registers the client is to be mapped
 * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are
 * for client 0; bits [35:32] are for client 8. For clients that are not
 * subject to WFQ credit blocking - their specifications here are not used.
 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
 * input clients to ETS arbiter. The reset default is set for management and
 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
 * use credit registers 0-5 respectively (0x543210876). Note that credit
 * registers can not be shared between clients.
 */
#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB                 0x1868c
/* [RW 9] Specify whether the client competes directly in the strict
 * priority arbiter. The bits are mapped according to client ID (client IDs
 * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic
 * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
 * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic.
 * Default value is set to enable strict priorities for all clients.
 */
#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT                       0x180e8
/* [RW 9] Specify whether the client is subject to WFQ credit blocking. The
 * bits are mapped according to client ID (client IDs are defined in
 * tx_arb_priority_client2): 0-management; 1-debug traffic from this port;
 * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2
 * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is
 * 0 for not using WFQ credit blocking.
 */
#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ                  0x180ec
/* [RW 32] Specify the upper bound that credit register 0 is allowed to
 * reach.
 */
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0                   0x1810c
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1                   0x18110
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2                   0x18114
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3                   0x18118
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4                   0x1811c
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5                   0x186a0
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6                   0x186a4
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7                   0x186a8
#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8                   0x186ac
/* [RW 32] Specify the weight (in bytes) to be added to credit register 0
 * when it is time to increment.
 */
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0                        0x180f8
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1                        0x180fc
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2                        0x18100
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3                        0x18104
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4                        0x18108
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5                        0x18690
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6                        0x18694
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7                        0x18698
#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8                        0x1869c
/* [RW 12] Specify the number of strict priority arbitration slots between
 * two round-robin arbitration slots to avoid starvation. A value of 0 means
 * no strict priority cycles - the strict priority with anti-starvation
 * arbiter becomes a round-robin arbiter.
 */
#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS                   0x180f4
/* [R 15] Specify the client number to be assigned to each priority of the
 * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0]
 * are for priority 0 client; bits [14:12] are for priority 4 client. The
 * clients are assigned the following IDs: 0-management; 1-debug traffic
 * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
 * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000)
 * for management at priority 0; debug traffic at priorities 1 and 2; COS0
 * traffic at priority 3; and COS1 traffic at priority 4.
 */
#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT                        0x180e4
/* [RW 32] Specify the client number to be assigned to each priority of the
 * strict priority arbiter. This register specifies bits 31:0 of the 36-bit
 * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
 * client; bits [35-32] are for priority 8 client. The clients are assigned
 * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
 * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
 * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
 * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
 * accommodate the 9 input clients to ETS arbiter.
 */
#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB                   0x18680
/* [RW 4] Specify the client number to be assigned to each priority of the
 * strict priority arbiter. This register specifies bits 35:32 of the 36-bit
 * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
 * client; bits [35-32] are for priority 8 client. The clients are assigned
 * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
 * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
 * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
 * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
 * accommodate the 9 input clients to ETS arbiter.
 */
#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB                   0x18684
/* [R 1] TX FIFO for transmitting data to MAC is empty. */
#define NIG_REG_P0_TX_MACFIFO_EMPTY                              0x18578
/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
 * packets to BRB LB interface to forward the packet to the host. All
 * packets from MCP are forwarded to the network when this bit is cleared -
 * regardless of the configured destination in tx_mng_destination register.
 * When MCP-to-host paths for both ports 0 and 1 are disabled - the arbiter
 * for BRB LB interface is bypassed and PBF LB traffic is always selected to
 * send to BRB LB.
 */
#define NIG_REG_P0_TX_MNG_HOST_ENABLE                            0x182f4
/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets
 * forwarded to the host.
 */
#define NIG_REG_P0_TX_MNG_HOST_FIFO_EMPTY                        0x182a8
/* [R 1] Indication that HBUF descriptor FIFO is empty. */
#define NIG_REG_P1_HBUF_DSCR_EMPTY                               0x18348
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
 * Ethernet header.
 */
#define NIG_REG_P1_HDRS_AFTER_BASIC                              0x1818c
/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
 * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
 * disabled when this bit is set.
 */
#define NIG_REG_P1_HWPFC_ENABLE                                  0x181d0
#define NIG_REG_P1_LLH_FUNC_MEM2                                 0x184c0
/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
 * indicates the validity of the data in the buffer. Writing a 1 to bit 16
 * will clear the buffer.
 */
#define NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID                        0x18774
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * the host. This location returns the lower 32 bits of timestamp value.
 */
#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB                       0x1876c
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * the host. This location returns the upper 32 bits of timestamp value.
 */
#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB                       0x18770
/* [RW 11] Mask register for the various parameters used in determining PTP
 * packet presence. Set each bit to 1 to mask out the particular parameter.
 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
 * MAC DA 2. The reset default is set to mask out all parameters.
 */
#define NIG_REG_P1_LLH_PTP_PARAM_MASK                            0x187c8
/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
 * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
 * packets only and require that the packet is IPv4 for the rules to match.
 * Note that rules 4-7 are for IPv6 packets only and require that the packet
 * is IPv6 for the rules to match.
 */
#define NIG_REG_P1_LLH_PTP_RULE_MASK                             0x187cc
/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
#define NIG_REG_P1_LLH_PTP_TO_HOST                               0x187d4
/* [RW 1] Input enable for RX MAC interface. */
#define NIG_REG_P1_MAC_IN_EN                                     0x185c0
/* [RW 1] Output enable for TX MAC interface */
#define NIG_REG_P1_MAC_OUT_EN                                    0x185c4
/* [RW 1] Output enable for TX PAUSE signal to the MAC. */
#define NIG_REG_P1_MAC_PAUSE_OUT_EN                              0x185c8
/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
 * future expansion) each priority is to be mapped to. Bits 3:0 specify the
 * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
 * priority field is extracted from the outer-most VLAN in receive packet.
 * Only COS 0 and COS 1 are supported in E2.
 */
#define NIG_REG_P1_PKT_PRIORITY_TO_COS                           0x181a8
/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
 * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
 * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
 * frame format in timesync event detection on RX side. Bit 3 enables
 * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
 * detection on TX side. Bit 5 enables V2 frame format in timesync event
 * detection on TX side. Note that for HW to detect PTP packet and extract
 * data from the packet, at least one of the version bits of that traffic
 * direction has to be enabled.
 */
#define NIG_REG_P1_PTP_EN                                        0x187b0
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
 * priority is mapped to COS 0 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P1_RX_COS0_PRIORITY_MASK                         0x181ac
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
 * priority is mapped to COS 1 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P1_RX_COS1_PRIORITY_MASK                         0x181b0
/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A
 * priority is mapped to COS 2 when the corresponding mask bit is 1. More
 * than one bit may be set; allowing multiple priorities to be mapped to one
 * COS.
 */
#define NIG_REG_P1_RX_COS2_PRIORITY_MASK                         0x186f8
/* [R 1] RX FIFO for receiving data from MAC is empty. */
#define NIG_REG_P1_RX_MACFIFO_EMPTY                              0x1858c
/* [R 1] TLLH FIFO is empty. */
#define NIG_REG_P1_TLLH_FIFO_EMPTY                               0x18338
/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
 * indicates the validity of the data in the buffer. Bit 17 indicates that
 * the sequence ID is valid and it is waiting for the TX timestamp value.
 * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
 * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
 */
#define NIG_REG_P1_TLLH_PTP_BUF_SEQID                            0x187ec
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * MCP. This location returns the lower 32 bits of timestamp value.
 */
#define NIG_REG_P1_TLLH_PTP_BUF_TS_LSB                           0x187e4
/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
 * MCP. This location returns the upper 32 bits of timestamp value.
 */
#define NIG_REG_P1_TLLH_PTP_BUF_TS_MSB                           0x187e8
/* [RW 11] Mask register for the various parameters used in determining PTP
 * packet presence. Set each bit to 1 to mask out the particular parameter.
 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
 * MAC DA 2. The reset default is set to mask out all parameters.
 */
#define NIG_REG_P1_TLLH_PTP_PARAM_MASK                           0x187f8
/* [RW 14] Mask regiser for the rules used in detecting PTP packets. Set
 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
 * default is to mask out all of the rules.
 */
#define NIG_REG_P1_TLLH_PTP_RULE_MASK                            0x187fc
/* [RW 32] Specify which of the credit registers the client is to be mapped
 * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
 * for client 0; bits [35:32] are for client 8. For clients that are not
 * subject to WFQ credit blocking - their specifications here are not used.
 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
 * input clients to ETS arbiter. The reset default is set for management and
 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
 * use credit registers 0-5 respectively (0x543210876). Note that credit
 * registers can not be shared between clients. Note also that there are
 * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only
 * credit registers 0-5 are valid. This register should be configured
 * appropriately before enabling WFQ.
 */
#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB                 0x186e8
/* [RW 4] Specify which of the credit registers the client is to be mapped
 * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are
 * for client 0; bits [35:32] are for client 8. For clients that are not
 * subject to WFQ credit blocking - their specifications here are not used.
 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
 * input clients to ETS arbiter. The reset default is set for management and
 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
 * use credit registers 0-5 respectively (0x543210876). Note that credit
 * registers can not be shared between clients. Note also that there are
 * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only
 * credit registers 0-5 are valid. This register should be configured
 * appropriately before enabling WFQ.
 */
#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB                 0x186ec
/* [RW 9] Specify whether the client competes directly in the strict
 * priority arbiter. The bits are mapped according to client ID (client IDs
 * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic
 * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
 * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic.
 * Default value is set to enable strict priorities for all clients.
 */
#define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT                       0x18234
/* [RW 9] Specify whether the client is subject to WFQ credit blocking. The
 * bits are mapped according to client ID (client IDs are defined in
 * tx_arb_priority_client2): 0-management; 1-debug traffic from this port;
 * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2
 * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is
 * 0 for not using WFQ credit blocking.
 */
#define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ                  0x18238
/* [RW 32] Specify the upper bound that credit register 0 is allowed to
 * reach.
 */
#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0                   0x18258
#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1                   0x1825c
#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2                   0x18260
#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3                   0x18264
#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4                   0x18268
#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5                   0x186f4
/* [RW 32] Specify the weight (in bytes) to be added to credit register 0
 * when it is time to increment.
 */
#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0                        0x18244
#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1                        0x18248
#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2                        0x1824c
#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3                        0x18250
#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4                        0x18254
#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5                        0x186f0
/* [RW 12] Specify the number of strict priority arbitration slots between
 * two round-robin arbitration slots to avoid starvation. A value of 0 means
 * no strict priority cycles - the strict priority with anti-starvation
 * arbiter becomes a round-robin arbiter.
 */
#define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS                   0x18240
/* [RW 32] Specify the client number to be assigned to each priority of the
 * strict priority arbiter. This register specifies bits 31:0 of the 36-bit
 * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
 * client; bits [35-32] are for priority 8 client. The clients are assigned
 * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
 * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
 * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
 * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
 * accommodate the 9 input clients to ETS arbiter. Note that this register
 * is the same as the one for port 0, except that port 1 only has COS 0-2
 * traffic. There is no traffic for COS 3-5 of port 1.
 */
#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB                   0x186e0
/* [RW 4] Specify the client number to be assigned to each priority of the
 * strict priority arbiter. This register specifies bits 35:32 of the 36-bit
 * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
 * client; bits [35-32] are for priority 8 client. The clients are assigned
 * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
 * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
 * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
 * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
 * accommodate the 9 input clients to ETS arbiter. Note that this register
 * is the same as the one for port 0, except that port 1 only has COS 0-2
 * traffic. There is no traffic for COS 3-5 of port 1.
 */
#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB                   0x186e4
/* [R 1] TX FIFO for transmitting data to MAC is empty. */
#define NIG_REG_P1_TX_MACFIFO_EMPTY                              0x18594
/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
 * packets to BRB LB interface to forward the packet to the host. All
 * packets from MCP are forwarded to the network when this bit is cleared -
 * regardless of the configured destination in tx_mng_destination register.
 */
#define NIG_REG_P1_TX_MNG_HOST_ENABLE                            0x182f8
/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets
 * forwarded to the host.
 */
#define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY                        0x182b8
/* [RW 1] Pause enable for port0. This register may get 1 only when
 * ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
 * port
 */
#define NIG_REG_PAUSE_ENABLE_0                                   0x160c0
#define NIG_REG_PAUSE_ENABLE_1                                   0x160c4
/* [RW 1] Value of this register will be transmitted to port swap when
 * ~nig_registers_strap_override.strap_override =1
 */
#define NIG_REG_PORT_SWAP                                        0x10394
/* [RW 1] PPP enable for port0. This register may get 1 only when
 * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the
 * same port
 */
#define NIG_REG_PPP_ENABLE_0                                     0x160b0
#define NIG_REG_PPP_ENABLE_1                                     0x160b4
/* [RW 1] Input enable for RX parser request IF */
#define NIG_REG_PRS_REQ_IN_EN                                    0x100b8
/* [R 5] control to serdes - CL45 DEVAD */
#define NIG_REG_SERDES0_CTRL_MD_DEVAD                            0x10370
/* [R 1] control to serdes; 0 - clause 45; 1 - clause 22 */
#define NIG_REG_SERDES0_CTRL_MD_ST                               0x1036c
/* [R 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
#define NIG_REG_SERDES0_CTRL_PHY_ADDR                            0x10374
/* [R 1] status from serdes0 that inputs to interrupt logic of link status */
#define NIG_REG_SERDES0_STATUS_LINK_STATUS                       0x10578
/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
 * for port 0 COS0
 */
#define NIG_REG_STAT0_BRB_DISCARD                                0x105f0
/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
 * for port 0 COS0
 */
#define NIG_REG_STAT0_BRB_TRUNCATE                               0x105f8
/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
 * between 1024 and 1522 bytes for port0
 */
#define NIG_REG_STAT0_EGRESS_MAC_PKT0                            0x10750
/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
 * between 1523 bytes and above for port0
 */
#define NIG_REG_STAT0_EGRESS_MAC_PKT1                            0x10760
/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
 * for port 1 COS0
 */
#define NIG_REG_STAT1_BRB_DISCARD                                0x10628
/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
 * between 1024 and 1522 bytes for port1
 */
#define NIG_REG_STAT1_EGRESS_MAC_PKT0                            0x107a0
/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
 * between 1523 bytes and above for port1
 */
#define NIG_REG_STAT1_EGRESS_MAC_PKT1                            0x107b0
/* [WB_R 64] Rx statistics : User octets received for LP */
#define NIG_REG_STAT2_BRB_OCTET                                  0x107e0
#define NIG_REG_STATUS_INTERRUPT_PORT0                           0x10328
/* [RW 1] port swap mux selection. If this register equal to 0 then port
 * swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
 * ort swap is equal to ~nig_registers_port_swap.port_swap
 */
#define NIG_REG_STRAP_OVERRIDE                                   0x10398
/* [WB 64] Addresses for TimeSync related registers in the timesync
 * generator sub-module.
 */
#define NIG_REG_TIMESYNC_GEN_REG                                 0x18800
/* [RW 1] output enable for RX_XCM0 IF */
#define NIG_REG_XCM0_OUT_EN                                      0x100f0
/* [RW 1] output enable for RX_XCM1 IF */
#define NIG_REG_XCM1_OUT_EN                                      0x100f4
/* [R 1] control to xgxs - remote PHY in-band MDIO */
#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST                       0x10348
/* [R 5] control to xgxs - CL45 DEVAD */
#define NIG_REG_XGXS0_CTRL_MD_DEVAD                              0x1033c
/* [R 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
#define NIG_REG_XGXS0_CTRL_MD_ST                                 0x10338
/* [R 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
#define NIG_REG_XGXS0_CTRL_PHY_ADDR                              0x10340
/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
#define NIG_REG_XGXS0_STATUS_LINK10G                             0x10680
/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
#define NIG_REG_XGXS0_STATUS_LINK_STATUS                         0x10684
/* [R 2] selection for XGXS lane of port 0 in NIG_MUX block */
#define NIG_REG_XGXS_LANE_SEL_P0                                 0x102e8
/* [R 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
#define NIG_REG_XGXS_SERDES0_MODE_SEL                            0x102e0
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT  (0x1 << 0)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1 << 9)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G      (0x1 << 15)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS  (0xf << 18)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
/* [RW 1] Interrupt mask register #0 read/write */
#define NIG_TSGEN_REG_NIG_TSGEN_INT_MASK                         0xcc
/* [R 1] Interrupt register #0 read */
#define NIG_TSGEN_REG_NIG_TSGEN_INT_STS                          0xc0
/* [RC 1] Interrupt register #0 read clear */
#define NIG_TSGEN_REG_NIG_TSGEN_INT_STS_CLR                      0xc4
/* [R 31] Removed for E3 B0 -The upper bound of the weight of COS0 in the
 * ETS command arbiter.
 */
#define PBF_REG_COS0_UPPER_BOUND                                 0x15c05c
/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter
 * of port 0.
 */
#define PBF_REG_COS0_UPPER_BOUND_P0                              0x15c2cc
/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter
 * of port 1.
 */
#define PBF_REG_COS0_UPPER_BOUND_P1                              0x15c2e4
/* [R 31] Removed for E3 B0 - The weight of COS0 in the ETS command arbiter. */
#define PBF_REG_COS0_WEIGHT                                      0x15c054
/* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */
#define PBF_REG_COS0_WEIGHT_P0                                   0x15c2a8
/* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */
#define PBF_REG_COS0_WEIGHT_P1                                   0x15c2c0
/* [R 31] Removed for E3 B0 -The upper bound of the weight of COS1 in the
 * ETS command arbiter.
 */
#define PBF_REG_COS1_UPPER_BOUND                                 0x15c060
/* [R 31] Removed for E3 B0 - The weight of COS1 in the ETS command arbiter. */
#define PBF_REG_COS1_WEIGHT                                      0x15c058
/* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */
#define PBF_REG_COS1_WEIGHT_P0                                   0x15c2ac
/* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */
#define PBF_REG_COS1_WEIGHT_P1                                   0x15c2c4
/* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */
#define PBF_REG_COS2_WEIGHT_P0                                   0x15c2b0
/* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */
#define PBF_REG_COS2_WEIGHT_P1                                   0x15c2c8
/* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */
#define PBF_REG_COS3_WEIGHT_P0                                   0x15c2b4
/* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */
#define PBF_REG_COS4_WEIGHT_P0                                   0x15c2b8
/* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */
#define PBF_REG_COS5_WEIGHT_P0                                   0x15c2bc
/* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_LB_Q                                      0x140338
/* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_Q0                                        0x14033c
/* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_Q1                                        0x140340
/* [R 11] Current credit for queue 2 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_Q2                                        0x140344
/* [R 11] Current credit for queue 3 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_Q3                                        0x140348
/* [R 11] Current credit for queue 4 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_Q4                                        0x14034c
/* [R 11] Current credit for queue 5 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_CREDIT_Q5                                        0x140350
/* [R 1] Removed for E3 B0 - Disable processing further tasks from port 0
 * (after ending the current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_P0                         0x14005c
/* [R 1] Removed for E3 B0 - Disable processing further tasks from port 1
 * (after ending the current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_P1                         0x140060
/* [RW 1] Disable processing further tasks from port 0 (after ending the
 * current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_Q0                         0x15c1bc
/* [RW 1] Disable processing further tasks from port 0 (after ending the
 * current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_Q1                         0x15c1c0
/* [RW 1] Disable processing further tasks from port 0 (after ending the
 * current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_Q2                         0x15c1c4
/* [RW 1] Disable processing further tasks from port 0 (after ending the
 * current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_Q3                         0x15c1c8
/* [RW 1] Disable processing further tasks from port 0 (after ending the
 * current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_Q4                         0x15c1cc
/* [RW 1] Disable processing further tasks from port 0 (after ending the
 * current task in process).
 */
#define PBF_REG_DISABLE_NEW_TASK_PROC_Q5                         0x15c1d0
#define PBF_REG_DISABLE_PF                                       0x1402e8
#define PBF_REG_DISABLE_VF                                       0x1402ec
/* [RW 18] For port 0: For each client that is subject to WFQ (the
 * corresponding bit is 1); indicates to which of the credit registers this
 * client is mapped. For clients which are not credit blocked; their mapping
 * is dont care.
 */
#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0                     0x15c288
/* [RW 9] For port 1: For each client that is subject to WFQ (the
 * corresponding bit is 1); indicates to which of the credit registers this
 * client is mapped. For clients which are not credit blocked; their mapping
 * is dont care.
 */
#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1                     0x15c28c
/* [RW 6] For port 0: Bit per client to indicate if the client competes in
 * the strict priority arbiter directly (corresponding bit = 1); or first
 * goes to the RR arbiter (corresponding bit = 0); and then competes in the
 * lowest priority in the strict-priority arbiter.
 */
#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0                      0x15c278
/* [RW 3] For port 1: Bit per client to indicate if the client competes in
 * the strict priority arbiter directly (corresponding bit = 1); or first
 * goes to the RR arbiter (corresponding bit = 0); and then competes in the
 * lowest priority in the strict-priority arbiter.
 */
#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1                      0x15c27c
/* [RW 6] For port 0: Bit per client to indicate if the client is subject to
 * WFQ credit blocking (corresponding bit = 1).
 */
#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0                 0x15c280
/* [RW 3] For port 0: Bit per client to indicate if the client is subject to
 * WFQ credit blocking (corresponding bit = 1).
 */
#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1                 0x15c284
/* [RW 16] For port 0: The number of strict priority arbitration slots
 * between 2 RR arbitration slots. A value of 0 means no strict priority
 * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR
 * arbiter.
 */
#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0                  0x15c2a0
/* [RW 16] For port 1: The number of strict priority arbitration slots
 * between 2 RR arbitration slots. A value of 0 means no strict priority
 * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR
 * arbiter.
 */
#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1                  0x15c2a4
/* [RW 18] For port 0: Indicates which client is connected to each priority
 * in the strict-priority arbiter. Priority 0 is the highest priority, and
 * priority 5 is the lowest; to which the RR output is connected to (this is
 * not configurable).
 */
#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0                       0x15c270
/* [RW 9] For port 1: Indicates which client is connected to each priority
 * in the strict-priority arbiter. Priority 0 is the highest priority, and
 * priority 5 is the lowest; to which the RR output is connected to (this is
 * not configurable).
 */
#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1                       0x15c274
/* [R 1] Removed for E3 B0 - Indicates that ETS is performed between the
 * COSes in the command arbiter. If reset strict priority w/ anti-starvation
 * will be performed w/o WFQ.
 */
#define PBF_REG_ETS_ENABLED                                      0x15c050
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
 * Ethernet header.
 */
#define PBF_REG_HDRS_AFTER_BASIC                                 0x15c0a8
/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */
#define PBF_REG_HDRS_AFTER_TAG_0                                 0x15c0b8
/* [R 1] Removed for E3 B0 - Indicates which COS is conncted to the highest
 * priority in the command arbiter.
 */
#define PBF_REG_HIGH_PRIORITY_COS_NUM                            0x15c04c
/* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_LB_Q                                    0x15c248
/* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_Q0                                      0x15c230
/* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_Q1                                      0x15c234
/* [RW 11] Initial credit for queue 2 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_Q2                                      0x15c238
/* [RW 11] Initial credit for queue 3 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_Q3                                      0x15c23c
/* [RW 11] Initial credit for queue 4 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_Q4                                      0x15c240
/* [RW 11] Initial credit for queue 5 in the tx port buffers in 16 byte
 * lines.
 */
#define PBF_REG_INIT_CRD_Q5                                      0x15c244
/* [R 1] Removed for E3 B0 - Init bit for port 0. When set the initial
 * credit of port 0 is copied to the credit register. Should be set and then
 * reset after the configuration of the port has ended.
 */
#define PBF_REG_INIT_P0                                          0x140004
/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
 * the LB queue. Reset upon init.
 */
#define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q                      0x140354
/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
 * queue 0. Reset upon init.
 */
#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0                        0x140358
/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
 * queue 1. Reset upon init.
 */
#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1                        0x14035c
/* [RW 1] Enable for mac interface 0. */
#define PBF_REG_MAC_IF0_ENABLE                                   0x140030
/* [RW 6] Bit-map indicating which headers must appear in the packet */
#define PBF_REG_MUST_HAVE_HDRS                                   0x15c0c4
/* [R 16] Removed for E3 B0 - The number of strict priority arbitration
 * slots between 2 RR arbitration slots. A value of 0 means no strict
 * priority cycles; i.e. the strict-priority w/ anti-starvation arbiter is a
 * RR arbiter.
 */
#define PBF_REG_NUM_STRICT_ARB_SLOTS                             0x15c064
/* [R 11] Removed for E3 B0 - Port 0 threshold used by arbiter in 16 byte
 * lines used when pause not suppoterd.
 */
#define PBF_REG_P0_ARB_THRSH                                     0x1400e4
/* [R 11] Removed for E3 B0 - Current credit for port 0 in the tx port
 * buffers in 16 byte lines.
 */
#define PBF_REG_P0_CREDIT                                        0x140200
/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
 * buffers in 16 byte lines.
 */
#define PBF_REG_P0_INIT_CRD                                      0x1400d0
/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
 * port 0. Reset upon init.
 */
#define PBF_REG_P0_INTERNAL_CRD_FREED_CNT                        0x140308
/* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */
#define PBF_REG_P0_PAUSE_ENABLE                                  0x140014
/* [R 8] Removed for E3 B0 - Number of tasks in port 0 task queue. */
#define PBF_REG_P0_TASK_CNT                                      0x140204
/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
 * freed from the task queue of port 0. Reset upon init.
 */
#define PBF_REG_P0_TQ_LINES_FREED_CNT                            0x1402f0
/* [R 12] Number of 8 bytes lines occupied in the task queue of port 0. */
#define PBF_REG_P0_TQ_OCCUPANCY                                  0x1402fc
/* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port
 * buffers in 16 byte lines.
 */
#define PBF_REG_P1_CREDIT                                        0x140208
/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
 * buffers in 16 byte lines.
 */
#define PBF_REG_P1_INIT_CRD                                      0x1400d4
/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
 * port 1. Reset upon init.
 */
#define PBF_REG_P1_INTERNAL_CRD_FREED_CNT                        0x14030c
/* [R 8] Removed for E3 B0 - Number of tasks in port 1 task queue. */
#define PBF_REG_P1_TASK_CNT                                      0x14020c
/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
 * freed from the task queue of port 1. Reset upon init.
 */
#define PBF_REG_P1_TQ_LINES_FREED_CNT                            0x1402f4
/* [R 12] Number of 8 bytes lines occupied in the task queue of port 1. */
#define PBF_REG_P1_TQ_OCCUPANCY                                  0x140300
/* [R 11] Removed for E3 B0 - Current credit for port 4 in the tx port
 * buffers in 16 byte lines.
 */
#define PBF_REG_P4_CREDIT                                        0x140210
/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
 * buffers in 16 byte lines.
 */
#define PBF_REG_P4_INIT_CRD                                      0x1400e0
/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
 * port 4. Reset upon init.
 */
#define PBF_REG_P4_INTERNAL_CRD_FREED_CNT                        0x140310
/* [R 8] Removed for E3 B0 - Number of tasks in port 4 task queue. */
#define PBF_REG_P4_TASK_CNT                                      0x140214
/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
 * freed from the task queue of port 4. Reset upon init.
 */
#define PBF_REG_P4_TQ_LINES_FREED_CNT                            0x1402f8
/* [R 12] Number of 8 bytes lines occupied in the task queue of port 4. */
#define PBF_REG_P4_TQ_OCCUPANCY                                  0x140304
/* [RW 7] Interrupt mask register #0 read/write */
#define PBF_REG_PBF_INT_MASK                                     0x1401d4
/* [R 7] Interrupt register #0 read */
#define PBF_REG_PBF_INT_STS                                      0x1401c8
/* [RC 7] Interrupt register #0 read clear */
#define PBF_REG_PBF_INT_STS_CLR                                  0x1401cc
/* [RW 28] Parity mask register #0 read/write */
#define PBF_REG_PBF_PRTY_MASK                                    0x1401e4
/* [R 28] Parity register #0 read */
#define PBF_REG_PBF_PRTY_STS                                     0x1401d8
/* [RC 28] Parity register #0 read clear */
#define PBF_REG_PBF_PRTY_STS_CLR                                 0x1401dc
/* [RW 16] The Ethernet type value for L2 tag 0 */
#define PBF_REG_TAG_ETHERTYPE_0                                  0x15c090
/* [RW 4] The length of the info field for L2 tag 0. The length is between
 * 2B and 14B; in 2B granularity
 */
#define PBF_REG_TAG_LEN_0                                        0x15c09c
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_LB_Q                                    0x140370
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_Q0                                      0x140374
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_Q1                                      0x140378
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_Q2                                      0x14037c
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_Q3                                      0x140380
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_Q4                                      0x140384
/* [R 8] Number of tasks in queue 0 task queue. */
#define PBF_REG_TASK_CNT_Q5                                      0x140388
/* [R 32] Cyclic counter for number of 8 byte lines freed from the LB task
 * queue. Reset upon init.
 */
#define PBF_REG_TQ_LINES_FREED_CNT_LB_Q                          0x14038c
/* [R 32] Cyclic counter for number of 8 byte lines freed from the task
 * queue 0. Reset upon init.
 */
#define PBF_REG_TQ_LINES_FREED_CNT_Q0                            0x140390
/* [R 32] Cyclic counter for number of 8 byte lines freed from task queue 1.
 * Reset upon init.
 */
#define PBF_REG_TQ_LINES_FREED_CNT_Q1                            0x140394
/* [R 13] Number of 8 bytes lines occupied in the task queue of the LB
 * queue.
 */
#define PBF_REG_TQ_OCCUPANCY_LB_Q                                0x1403a8
/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 0. */
#define PBF_REG_TQ_OCCUPANCY_Q0                                  0x1403ac
/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
#define PBF_REG_TQ_OCCUPANCY_Q1                                  0x1403b0
/* [RW 16] One of 8 values that should be compared to type in Ethernet
 * parsing. If there is a match; the field after Ethernet is the first VLAN.
 * Reset value is 0x8100 which is the standard VLAN type. Note that when
 * checking second VLAN; type is compared only to 0x8100.
 */
#define PBF_REG_VLAN_TYPE_0                                      0x15c06c
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK                                       0x28
/* [R 2] Interrupt register #0 read */
#define PB_REG_PB_INT_STS                                        0x1c
/* [RC 2] Interrupt register #0 read clear */
#define PB_REG_PB_INT_STS_CLR                                    0x20
/* [RW 4] Parity mask register #0 read/write */
#define PB_REG_PB_PRTY_MASK                                      0x38
/* [R 4] Parity register #0 read */
#define PB_REG_PB_PRTY_STS                                       0x2c
/* [RC 4] Parity register #0 read clear */
#define PB_REG_PB_PRTY_STS_CLR                                   0x30
#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR                (0x1 << 0)
#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW        (0x1 << 8)
#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR       (0x1 << 1)
#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN              (0x1 << 6)
#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN        (0x1 << 7)
#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN  (0x1 << 4)
#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN     (0x1 << 3)
#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN   (0x1 << 5)
#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN               (0x1 << 2)
/* [R 8] Config space A attention dirty bits. Each bit indicates that the
 * corresponding PF generates config space A attention. Set by PXP. Reset by
 * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits
 * from both paths.
 */
#define PGLUE_B_REG_CFG_SPACE_A_REQUEST                          0x9010
/* [R 8] Config space B attention dirty bits. Each bit indicates that the
 * corresponding PF generates config space B attention. Set by PXP. Reset by
 * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits
 * from both paths.
 */
#define PGLUE_B_REG_CFG_SPACE_B_REQUEST                          0x9014
/* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates
 * that the FLR register of the corresponding PF was set. Set by PXP. Reset
 * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits
 * from both paths.
 */
#define PGLUE_B_REG_FLR_REQUEST_PF_7_0                           0x9028
/* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1
 * to a bit in this register in order to clear the corresponding bit in
 * flr_request_pf_7_0 register. Note: register contains bits from both
 * paths.
 */
#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR                       0x9418
/* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit
 * indicates that the FLR register of the corresponding VF was set. Set by
 * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr.
 */
#define PGLUE_B_REG_FLR_REQUEST_VF_127_96                        0x9024
/* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit
 * indicates that the FLR register of the corresponding VF was set. Set by
 * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr.
 */
#define PGLUE_B_REG_FLR_REQUEST_VF_31_0                          0x9018
/* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit
 * indicates that the FLR register of the corresponding VF was set. Set by
 * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr.
 */
#define PGLUE_B_REG_FLR_REQUEST_VF_63_32                         0x901c
/* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit
 * indicates that the FLR register of the corresponding VF was set. Set by
 * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr.
 */
#define PGLUE_B_REG_FLR_REQUEST_VF_95_64                         0x9020
/* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit
 * 0 - Target memory read arrived with a correctable error. Bit 1 - Target
 * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW
 * arrived with a correctable error. Bit 3 - Configuration RW arrived with
 * an uncorrectable error. Bit 4 - Completion with Configuration Request
 * Retry Status. Bit 5 - Expansion ROM access received with a write request.
 * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and
 * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010;
 * and pcie_rx_last not asserted.
 */
#define PGLUE_B_REG_INCORRECT_RCV_DETAILS                        0x9068
#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER                  0x942c
#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ             0x9430
#define PGLUE_B_REG_INTERNAL_VFID_ENABLE                         0x9438
/* [W 7] Writing 1 to each bit in this register clears a corresponding error
 * details register and enables logging new error details. Bit 0 - clears
 * INCORRECT_RCV_DETAILS; Bit 1 - clears RX_ERR_DETAILS; Bit 2 - clears
 * TX_ERR_WR_ADD_31_0 TX_ERR_WR_ADD_63_32 TX_ERR_WR_DETAILS
 * TX_ERR_WR_DETAILS2 TX_ERR_RD_ADD_31_0 TX_ERR_RD_ADD_63_32
 * TX_ERR_RD_DETAILS TX_ERR_RD_DETAILS2 TX_ERR_WR_DETAILS_ICPL; Bit 3 -
 * clears VF_LENGTH_VIOLATION_DETAILS. Bit 4 - clears
 * VF_GRC_SPACE_VIOLATION_DETAILS. Bit 5 - clears RX_TCPL_ERR_DETAILS. Bit 6
 * - clears TCPL_IN_TWO_RCBS_DETAILS.
 */
#define PGLUE_B_REG_LATCHED_ERRORS_CLR                           0x943c
/* [RW 11] Interrupt mask register #0 read/write */
#define PGLUE_B_REG_PGLUE_B_INT_MASK                             0x92a4
/* [R 11] Interrupt register #0 read */
#define PGLUE_B_REG_PGLUE_B_INT_STS                              0x9298
/* [RC 11] Interrupt register #0 read clear */
#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR                          0x929c
/* [RW 2] Parity mask register #0 read/write */
#define PGLUE_B_REG_PGLUE_B_PRTY_MASK                            0x92b4
/* [R 2] Parity register #0 read */
#define PGLUE_B_REG_PGLUE_B_PRTY_STS                             0x92a8
/* [RC 2] Parity register #0 read clear */
#define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR                         0x92ac
/* [R 13] Details of first request received with error. [2:0] - PFID. [3] -
 * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion
 * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 -
 * completer abort. 3 - Illegal value for this field. [12] valid - indicates
 * if there was a completion error since the last time this register was
 * cleared.
 */
#define PGLUE_B_REG_RX_ERR_DETAILS                               0x9080
/* [R 18] Details of first ATS Translation Completion request received with
 * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code -
 * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 -
 * unsupported request. 2 - completer abort. 3 - Illegal value for this
 * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a
 * completion error since the last time this register was cleared.
 */
#define PGLUE_B_REG_RX_TCPL_ERR_DETAILS                          0x9084
/* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to
 * a bit in this register in order to clear the corresponding bit in
 * shadow_bme_pf_7_0 register. MCP should never use this unless a
 * work-around is needed. Note: register contains bits from both paths.
 */
#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR                        0x9458
/* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the
 * VF enable register of the corresponding PF is written to 0 and was
 * previously 1. Set by PXP. Reset by MCP writing 1 to
 * sr_iov_disabled_request_clr. Note: register contains bits from both
 * paths.
 */
#define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST                      0x9030
/* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read
 * completion did not return yet. 1 - tag is unused. Same functionality as
 * pxp2_registers_pgl_exp_rom_data2 for tags 0-31.
 */
#define PGLUE_B_REG_TAGS_63_32                                   0x9244
/* [R 32] Address [31:0] of first read request not submitted due to error */
#define PGLUE_B_REG_TX_ERR_RD_ADD_31_0                           0x9098
/* [R 32] Address [63:32] of first read request not submitted due to error */
#define PGLUE_B_REG_TX_ERR_RD_ADD_63_32                          0x909c
/* [R 31] Details of first read request not submitted due to error. [4:0]
 * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request.
 * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] -
 * VFID.
 */
#define PGLUE_B_REG_TX_ERR_RD_DETAILS                            0x90a0
/* [R 26] Details of first read request not submitted due to error. [15:0]
 * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
 * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
 * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
 * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
 * indicates if there was a request not submitted due to error since the
 * last time this register was cleared.
 */
#define PGLUE_B_REG_TX_ERR_RD_DETAILS2                           0x90a4
/* [R 32] Address [31:0] of first write request not submitted due to error */
#define PGLUE_B_REG_TX_ERR_WR_ADD_31_0                           0x9088
/* [R 32] Address [63:32] of first write request not submitted due to error */
#define PGLUE_B_REG_TX_ERR_WR_ADD_63_32                          0x908c
/* [R 31] Details of first write request not submitted due to error. [4:0]
 * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25]
 * - VFID.
 */
#define PGLUE_B_REG_TX_ERR_WR_DETAILS                            0x9090
/* [R 26] Details of first write request not submitted due to error. [15:0]
 * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
 * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
 * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
 * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
 * indicates if there was a request not submitted due to error since the
 * last time this register was cleared.
 */
#define PGLUE_B_REG_TX_ERR_WR_DETAILS2                           0x9094
/* [R 26] Details of first target VF request accessing VF GRC space that
 * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write.
 * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a
 * request accessing VF GRC space that failed permission check since the
 * last time this register was cleared. Permission checks are: function
 * permission; R/W permission; address range permission.
 */
#define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS               0x9234
/* [R 31] Details of first target VF request with length violation (too many
 * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address).
 * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30]
 * valid - indicates if there was a request with length violation since the
 * last time this register was cleared. Length violations: length of more
 * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and
 * length is more than 1 DW.
 */
#define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS                  0x9230
/* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates
 * that there was a completion with uncorrectable error for the
 * corresponding PF. Set by PXP. Reset by MCP writing 1 to
 * was_error_pf_7_0_clr.
 */
#define PGLUE_B_REG_WAS_ERROR_PF_7_0                             0x907c
/* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1
 * to a bit in this register in order to clear the corresponding bit in
 * flr_request_pf_7_0 register.
 */
#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR                         0x9470
/* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit
 * indicates that there was a completion with uncorrectable error for the
 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
 * was_error_vf_127_96_clr.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_127_96                          0x9078
/* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP
 * writes 1 to a bit in this register in order to clear the corresponding
 * bit in was_error_vf_127_96 register.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR                      0x9474
/* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit
 * indicates that there was a completion with uncorrectable error for the
 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
 * was_error_vf_31_0_clr.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_31_0                            0x906c
/* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes
 * 1 to a bit in this register in order to clear the corresponding bit in
 * was_error_vf_31_0 register.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR                        0x9478
/* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit
 * indicates that there was a completion with uncorrectable error for the
 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
 * was_error_vf_63_32_clr.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_63_32                           0x9070
/* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes
 * 1 to a bit in this register in order to clear the corresponding bit in
 * was_error_vf_63_32 register.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR                       0x947c
/* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit
 * indicates that there was a completion with uncorrectable error for the
 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
 * was_error_vf_95_64_clr.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_95_64                           0x9074
/* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes
 * 1 to a bit in this register in order to clear the corresponding bit in
 * was_error_vf_95_64 register.
 */
#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR                       0x9480
#define PRS_REG_A_PRSU_20                                        0x40134
/* [R 8] debug only: CFC load request current credit. Transaction based. */
#define PRS_REG_CFC_LD_CURRENT_CREDIT                            0x40164
/* [R 8] debug only: CFC search request current credit. Transaction based. */
#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT                        0x40168
/* [RW 6] The initial credit for the search message to the CFC interface.
 * Credit is transaction based.
 */
#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT                        0x4011c
/* [RW 24] CID for port 0 if no match */
#define PRS_REG_CID_PORT_0                                       0x400fc
/* [RW 1] Indicates if in outer vlan mode. 0=non-outer-vlan mode; 1 = outer
 * vlan mode.
 */
#define PRS_REG_E1HOV_MODE                                       0x401c8
/* [R 6] Bit-map indicating which L2 hdrs may appear after the basic
 * Ethernet header.
 */
#define PRS_REG_HDRS_AFTER_BASIC                                 0x40238
/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
 * Ethernet header for port 0 packets.
 */
#define PRS_REG_HDRS_AFTER_BASIC_PORT_0                          0x40270
#define PRS_REG_HDRS_AFTER_BASIC_PORT_1                          0x40290
/* [R 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */
#define PRS_REG_HDRS_AFTER_TAG_0                                 0x40248
/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 for
 * port 0 packets
 */
#define PRS_REG_HDRS_AFTER_TAG_0_PORT_0                          0x40280
#define PRS_REG_HDRS_AFTER_TAG_0_PORT_1                          0x402a0
/* [R 6] Bit-map indicating which headers must appear in the packet */
#define PRS_REG_MUST_HAVE_HDRS                                   0x40254
/* [RW 6] Bit-map indicating which headers must appear in the packet for
 * port 0 packets
 */
#define PRS_REG_MUST_HAVE_HDRS_PORT_0                            0x4028c
#define PRS_REG_MUST_HAVE_HDRS_PORT_1                            0x402ac
#define PRS_REG_NIC_MODE                                         0x40138
/* [ST 24] The number of input packets */
#define PRS_REG_NUM_OF_PACKETS                                   0x40124
/* [R 2] debug only: Number of pending requests for CAC on port 0. */
#define PRS_REG_PENDING_BRB_CAC0_RQ                              0x40174
/* [R 2] debug only: Number of pending requests for header parsing. */
#define PRS_REG_PENDING_BRB_PRS_RQ                               0x40170
/* [RW 1] Interrupt mask register #0 read/write */
#define PRS_REG_PRS_INT_MASK                                     0x40194
/* [R 1] Interrupt register #0 read */
#define PRS_REG_PRS_INT_STS                                      0x40188
/* [RC 1] Interrupt register #0 read clear */
#define PRS_REG_PRS_INT_STS_CLR                                  0x4018c
/* [RW 8] Parity mask register #0 read/write */
#define PRS_REG_PRS_PRTY_MASK                                    0x401a4
/* [R 8] Parity register #0 read */
#define PRS_REG_PRS_PRTY_STS                                     0x40198
/* [RC 8] Parity register #0 read clear */
#define PRS_REG_PRS_PRTY_STS_CLR                                 0x4019c
/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
 * serail number was released by SDM but cannot be used because a previous
 * serial number was not released.
 */
#define PRS_REG_SERIAL_NUM_STATUS_LSB                            0x40154
/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
 * serail number was released by SDM but cannot be used because a previous
 * serial number was not released.
 */
#define PRS_REG_SERIAL_NUM_STATUS_MSB                            0x40158
/* [R 4] debug only: SRC current credit. Transaction based. */
#define PRS_REG_SRC_CURRENT_CREDIT                               0x4016c
/* [RW 16] The Ethernet type value for L2 tag 0 */
#define PRS_REG_TAG_ETHERTYPE_0                                  0x401d4
/* [RW 4] The length of the info field for L2 tag 0. The length is between
 * 2B and 14B; in 2B granularity
 */
#define PRS_REG_TAG_LEN_0                                        0x4022c
/* [R 8] debug only: TCM current credit. Cycle based. */
#define PRS_REG_TCM_CURRENT_CREDIT                               0x40160
/* [R 8] debug only: TSDM current credit. Transaction based. */
#define PRS_REG_TSDM_CURRENT_CREDIT                              0x4015c
/* [RW 16] One of 8 values that should be compared to type in Ethernet
 * parsing. If there is a match; the field after Ethernet is the first VLAN.
 * Reset value is 0x8100 which is the standard VLAN type. Note that when
 * checking second VLAN; type is compared only to 0x8100.
 */
#define PRS_REG_VLAN_TYPE_0                                      0x401a8
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT                     (0x1 << 19)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF                      (0x1 << 20)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN                   (0x1 << 22)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED                (0x1 << 23)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED               (0x1 << 24)
#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR               (0x1 << 7)
#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR           (0x1 << 7)
/* [R 7] Debug only: Number of used entries in the data FIFO */
#define PXP2_REG_HST_DATA_FIFO_STATUS                            0x12047c
/* [R 7] Debug only: Number of used entries in the header FIFO */
#define PXP2_REG_HST_HEADER_FIFO_STATUS                          0x120478
#define PXP2_REG_PGL_ADDR_88_F0                                  0x120534
/* [R 32] GRC address for configuration access to PCIE config address 0x88.
 * any write to this PCIE address will cause a GRC write access to the
 * address that's in t this register
 */
#define PXP2_REG_PGL_ADDR_88_F1                                  0x120544
#define PXP2_REG_PGL_ADDR_8C_F0                                  0x120538
/* [R 32] GRC address for configuration access to PCIE config address 0x8c.
 * any write to this PCIE address will cause a GRC write access to the
 * address that's in t this register
 */
#define PXP2_REG_PGL_ADDR_8C_F1                                  0x120548
#define PXP2_REG_PGL_ADDR_90_F0                                  0x12053c
/* [R 32] GRC address for configuration access to PCIE config address 0x90.
 * any write to this PCIE address will cause a GRC write access to the
 * address that's in t this register
 */
#define PXP2_REG_PGL_ADDR_90_F1                                  0x12054c
#define PXP2_REG_PGL_ADDR_94_F0                                  0x120540
/* [R 32] GRC address for configuration access to PCIE config address 0x94.
 * any write to this PCIE address will cause a GRC write access to the
 * address that's in t this register
 */
#define PXP2_REG_PGL_ADDR_94_F1                                  0x120550
/* [RW 32] third dword data of expansion rom request. this register is
 * special. reading from it provides a vector outstanding read requests. if
 * a bit is zero it means that a read request on the corresponding tag did
 * not finish yet (not all completions have arrived for it)
 */
#define PXP2_REG_PGL_EXP_ROM2                                    0x120808
/* [RW 16] this field allows one function to pretend being another function
 * when accessing any BAR mapped resource within the device. the value of
 * the field is the number of the function that will be accessed
 * effectively. after software write to this bit it must read it in order to
 * know that the new value is updated. Bits [15] - force. Bits [14] - path
 * ID. Bits [13:10] - Reserved. Bits [9:4] - VFID. Bits [3] - VF valid. Bits
 * [2:0] - PFID.
 */
#define PXP2_REG_PGL_PRETEND_FUNC_F0                             0x120674
/* [RW 16] this field allows one function to pretend being another function
 * when accessing any BAR mapped resource within the device. the value of
 * the field is the number of the function that will be accessed
 * effectively. after software write to this bit it must read it in order to
 * know that the new value is updated. Bits [15] - force. Bits [14] - path
 * ID. Bits [13:10] - Reserved. Bits [9:4] - VFID. Bits [3] - VF valid. Bits
 * [2:0] - PFID.
 */
#define PXP2_REG_PGL_PRETEND_FUNC_F1                             0x120678
/* [R 1] this bit indicates that a read request was blocked because of
 * bus_master_en was deasserted
 */
#define PXP2_REG_PGL_READ_BLOCKED                                0x120568
#define PXP2_REG_PGL_TAGS_LIMIT                                  0x1205a8
/* [R 21] debug only */
#define PXP2_REG_PGL_TXW_CDTS                                    0x12052c
/* [R 1] this bit indicates that a write request was blocked because of
 * bus_master_en was deasserted
 */
#define PXP2_REG_PGL_WRITE_BLOCKED                               0x120564
#define PXP2_REG_PSWRQ_BW_ADD1                                   0x1201c0
#define PXP2_REG_PSWRQ_BW_ADD10                                  0x1201e4
#define PXP2_REG_PSWRQ_BW_ADD11                                  0x1201e8
#define PXP2_REG_PSWRQ_BW_ADD2                                   0x1201c4
#define PXP2_REG_PSWRQ_BW_ADD28                                  0x120228
#define PXP2_REG_PSWRQ_BW_ADD3                                   0x1201c8
#define PXP2_REG_PSWRQ_BW_ADD6                                   0x1201d4
#define PXP2_REG_PSWRQ_BW_ADD7                                   0x1201d8
#define PXP2_REG_PSWRQ_BW_ADD8                                   0x1201dc
#define PXP2_REG_PSWRQ_BW_ADD9                                   0x1201e0
#define PXP2_REG_PSWRQ_BW_CREDIT                                 0x12032c
#define PXP2_REG_PSWRQ_BW_L1                                     0x1202b0
#define PXP2_REG_PSWRQ_BW_L10                                    0x1202d4
#define PXP2_REG_PSWRQ_BW_L11                                    0x1202d8
#define PXP2_REG_PSWRQ_BW_L2                                     0x1202b4
#define PXP2_REG_PSWRQ_BW_L28                                    0x120318
#define PXP2_REG_PSWRQ_BW_L3                                     0x1202b8
#define PXP2_REG_PSWRQ_BW_L6                                     0x1202c4
#define PXP2_REG_PSWRQ_BW_L7                                     0x1202c8
#define PXP2_REG_PSWRQ_BW_L8                                     0x1202cc
#define PXP2_REG_PSWRQ_BW_L9                                     0x1202d0
#define PXP2_REG_PSWRQ_BW_RD                                     0x120324
#define PXP2_REG_PSWRQ_BW_UB1                                    0x120238
#define PXP2_REG_PSWRQ_BW_UB10                                   0x12025c
#define PXP2_REG_PSWRQ_BW_UB11                                   0x120260
#define PXP2_REG_PSWRQ_BW_UB2                                    0x12023c
#define PXP2_REG_PSWRQ_BW_UB28                                   0x1202a0
#define PXP2_REG_PSWRQ_BW_UB3                                    0x120240
#define PXP2_REG_PSWRQ_BW_UB6                                    0x12024c
#define PXP2_REG_PSWRQ_BW_UB7                                    0x120250
#define PXP2_REG_PSWRQ_BW_UB8                                    0x120254
#define PXP2_REG_PSWRQ_BW_UB9                                    0x120258
#define PXP2_REG_PSWRQ_BW_WR                                     0x120328
#define PXP2_REG_PSWRQ_CDU0_L2P                                  0x120000
#define PXP2_REG_PSWRQ_QM0_L2P                                   0x120038
#define PXP2_REG_PSWRQ_SRC0_L2P                                  0x120054
#define PXP2_REG_PSWRQ_TM0_L2P                                   0x12001c
#define PXP2_REG_PSWRQ_TSDM0_L2P                                 0x1200e0
/* [RW 32] Interrupt mask register #0 read/write */
#define PXP2_REG_PXP2_INT_MASK_0                                 0x120578
#define PXP2_REG_PXP2_INT_MASK_1                                 0x120614
/* [R 32] Interrupt register #0 read */
#define PXP2_REG_PXP2_INT_STS_0                                  0x12056c
#define PXP2_REG_PXP2_INT_STS_1                                  0x120608
/* [RC 32] Interrupt register #0 read clear */
#define PXP2_REG_PXP2_INT_STS_CLR_0                              0x120570
#define PXP2_REG_PXP2_INT_STS_CLR_1                              0x12060c
/* [RW 32] Parity mask register #0 read/write */
#define PXP2_REG_PXP2_PRTY_MASK_0                                0x120588
#define PXP2_REG_PXP2_PRTY_MASK_1                                0x120598
/* [R 32] Parity register #0 read */
#define PXP2_REG_PXP2_PRTY_STS_0                                 0x12057c
#define PXP2_REG_PXP2_PRTY_STS_1                                 0x12058c
/* [RC 32] Parity register #0 read clear */
#define PXP2_REG_PXP2_PRTY_STS_CLR_0                             0x120580
#define PXP2_REG_PXP2_PRTY_STS_CLR_1                             0x120590
/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
 * indication about backpressure)
 */
#define PXP2_REG_RD_ALMOST_FULL_0                                0x120424
/* [R 8] Debug only: The blocks counter - number of unused block ids */
#define PXP2_REG_RD_BLK_CNT                                      0x120418
/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
 * Must be bigger than 6. Normally should not be changed.
 */
#define PXP2_REG_RD_BLK_NUM_CFG                                  0x12040c
/* [RW 2] CDU byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_CDURD_SWAP_MODE                              0x120404
/* [R 29] Details of first request with error on receive side: [15:0] - Echo
 * ID. [28:16] - sub-request length plus start_offset_2_0 minus 1.
 */
#define PXP2_REG_RD_CPL_ERR_DETAILS                              0x120778
/* [R 10] Details of first request with error on receive side: [4:0] - VQ
 * ID. [8:5] - client ID. [9] - valid - indicates if there was a completion
 * error since the last time this register was read.
 */
#define PXP2_REG_RD_CPL_ERR_DETAILS2                             0x12077c
/* [RW 1] When '1'; inputs to the PSWRD block are ignored */
#define PXP2_REG_RD_DISABLE_INPUTS                               0x120374
/* [R 1] PSWRD internal memories initialization is done */
#define PXP2_REG_RD_INIT_DONE                                    0x120370
/* [R 1] Debug only: Indication if delivery ports are idle */
#define PXP2_REG_RD_PORT_IS_IDLE_0                               0x12041c
#define PXP2_REG_RD_PORT_IS_IDLE_1                               0x120420
/* [RW 2] QM byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_QM_SWAP_MODE                                 0x1203f8
/* [RW 2] SRC byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_SRC_SWAP_MODE                                0x120400
/* [R 7] Debug only: The SR counter - number of unused sub request ids */
#define PXP2_REG_RD_SR_CNT                                       0x120414
/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
 * be bigger than 1. Normally should not be changed.
 */
#define PXP2_REG_RD_SR_NUM_CFG                                   0x120408
/* [RW 1] Signals the PSWRD block to start initializing internal memories */
#define PXP2_REG_RD_START_INIT                                   0x12036c
/* [RW 2] TM byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_TM_SWAP_MODE                                 0x1203fc
/* [RW 10] Bandwidth addition to VQ0 write requests */
#define PXP2_REG_RQ_BW_RD_ADD0                                   0x1201bc
/* [RW 10] Bandwidth addition to VQ12 read requests */
#define PXP2_REG_RQ_BW_RD_ADD12                                  0x1201ec
/* [RW 10] Bandwidth addition to VQ13 read requests */
#define PXP2_REG_RQ_BW_RD_ADD13                                  0x1201f0
/* [RW 10] Bandwidth addition to VQ14 read requests */
#define PXP2_REG_RQ_BW_RD_ADD14                                  0x1201f4
/* [RW 10] Bandwidth addition to VQ15 read requests */
#define PXP2_REG_RQ_BW_RD_ADD15                                  0x1201f8
/* [RW 10] Bandwidth addition to VQ16 read requests */
#define PXP2_REG_RQ_BW_RD_ADD16                                  0x1201fc
/* [RW 10] Bandwidth addition to VQ17 read requests */
#define PXP2_REG_RQ_BW_RD_ADD17                                  0x120200
/* [RW 10] Bandwidth addition to VQ18 read requests */
#define PXP2_REG_RQ_BW_RD_ADD18                                  0x120204
/* [RW 10] Bandwidth addition to VQ19 read requests */
#define PXP2_REG_RQ_BW_RD_ADD19                                  0x120208
/* [RW 10] Bandwidth addition to VQ20 read requests */
#define PXP2_REG_RQ_BW_RD_ADD20                                  0x12020c
/* [RW 10] Bandwidth addition to VQ22 read requests */
#define PXP2_REG_RQ_BW_RD_ADD22                                  0x120210
/* [RW 10] Bandwidth addition to VQ23 read requests */
#define PXP2_REG_RQ_BW_RD_ADD23                                  0x120214
/* [RW 10] Bandwidth addition to VQ24 read requests */
#define PXP2_REG_RQ_BW_RD_ADD24                                  0x120218
/* [RW 10] Bandwidth addition to VQ25 read requests */
#define PXP2_REG_RQ_BW_RD_ADD25                                  0x12021c
/* [RW 10] Bandwidth addition to VQ26 read requests */
#define PXP2_REG_RQ_BW_RD_ADD26                                  0x120220
/* [RW 10] Bandwidth addition to VQ27 read requests */
#define PXP2_REG_RQ_BW_RD_ADD27                                  0x120224
/* [RW 10] Bandwidth addition to VQ4 read requests */
#define PXP2_REG_RQ_BW_RD_ADD4                                   0x1201cc
/* [RW 10] Bandwidth addition to VQ5 read requests */
#define PXP2_REG_RQ_BW_RD_ADD5                                   0x1201d0
/* [RW 10] Bandwidth Typical L for VQ0 Read requests */
#define PXP2_REG_RQ_BW_RD_L0                                     0x1202ac
/* [RW 10] Bandwidth Typical L for VQ12 Read requests */
#define PXP2_REG_RQ_BW_RD_L12                                    0x1202dc
/* [RW 10] Bandwidth Typical L for VQ13 Read requests */
#define PXP2_REG_RQ_BW_RD_L13                                    0x1202e0
/* [RW 10] Bandwidth Typical L for VQ14 Read requests */
#define PXP2_REG_RQ_BW_RD_L14                                    0x1202e4
/* [RW 10] Bandwidth Typical L for VQ15 Read requests */
#define PXP2_REG_RQ_BW_RD_L15                                    0x1202e8
/* [RW 10] Bandwidth Typical L for VQ16 Read requests */
#define PXP2_REG_RQ_BW_RD_L16                                    0x1202ec
/* [RW 10] Bandwidth Typical L for VQ17 Read requests */
#define PXP2_REG_RQ_BW_RD_L17                                    0x1202f0
/* [RW 10] Bandwidth Typical L for VQ18 Read requests */
#define PXP2_REG_RQ_BW_RD_L18                                    0x1202f4
/* [RW 10] Bandwidth Typical L for VQ19 Read requests */
#define PXP2_REG_RQ_BW_RD_L19                                    0x1202f8
/* [RW 10] Bandwidth Typical L for VQ20 Read requests */
#define PXP2_REG_RQ_BW_RD_L20                                    0x1202fc
/* [RW 10] Bandwidth Typical L for VQ22 Read requests */
#define PXP2_REG_RQ_BW_RD_L22                                    0x120300
/* [RW 10] Bandwidth Typical L for VQ23 Read requests */
#define PXP2_REG_RQ_BW_RD_L23                                    0x120304
/* [RW 10] Bandwidth Typical L for VQ24 Read requests */
#define PXP2_REG_RQ_BW_RD_L24                                    0x120308
/* [RW 10] Bandwidth Typical L for VQ25 Read requests */
#define PXP2_REG_RQ_BW_RD_L25                                    0x12030c
/* [RW 10] Bandwidth Typical L for VQ26 Read requests */
#define PXP2_REG_RQ_BW_RD_L26                                    0x120310
/* [RW 10] Bandwidth Typical L for VQ27 Read requests */
#define PXP2_REG_RQ_BW_RD_L27                                    0x120314
/* [RW 10] Bandwidth Typical L for VQ4 Read requests */
#define PXP2_REG_RQ_BW_RD_L4                                     0x1202bc
/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
#define PXP2_REG_RQ_BW_RD_L5                                     0x1202c0
/* [RW 7] Bandwidth upper bound for VQ0 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND0                                0x120234
/* [RW 7] Bandwidth upper bound for VQ12 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND12                               0x120264
/* [RW 7] Bandwidth upper bound for VQ13 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND13                               0x120268
/* [RW 7] Bandwidth upper bound for VQ14 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND14                               0x12026c
/* [RW 7] Bandwidth upper bound for VQ15 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND15                               0x120270
/* [RW 7] Bandwidth upper bound for VQ16 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND16                               0x120274
/* [RW 7] Bandwidth upper bound for VQ17 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND17                               0x120278
/* [RW 7] Bandwidth upper bound for VQ18 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND18                               0x12027c
/* [RW 7] Bandwidth upper bound for VQ19 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND19                               0x120280
/* [RW 7] Bandwidth upper bound for VQ20 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND20                               0x120284
/* [RW 7] Bandwidth upper bound for VQ22 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND22                               0x120288
/* [RW 7] Bandwidth upper bound for VQ23 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND23                               0x12028c
/* [RW 7] Bandwidth upper bound for VQ24 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND24                               0x120290
/* [RW 7] Bandwidth upper bound for VQ25 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND25                               0x120294
/* [RW 7] Bandwidth upper bound for VQ26 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND26                               0x120298
/* [RW 7] Bandwidth upper bound for VQ27 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND27                               0x12029c
/* [RW 7] Bandwidth upper bound for VQ4 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND4                                0x120244
/* [RW 7] Bandwidth upper bound for VQ5 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND5                                0x120248
/* [RW 10] Bandwidth addition to VQ29 write requests */
#define PXP2_REG_RQ_BW_WR_ADD29                                  0x12022c
/* [RW 10] Bandwidth addition to VQ30 write requests */
#define PXP2_REG_RQ_BW_WR_ADD30                                  0x120230
/* [RW 10] Bandwidth Typical L for VQ29 Write requests */
#define PXP2_REG_RQ_BW_WR_L29                                    0x12031c
/* [RW 10] Bandwidth Typical L for VQ30 Write requests */
#define PXP2_REG_RQ_BW_WR_L30                                    0x120320
/* [RW 7] Bandwidth upper bound for VQ29 */
#define PXP2_REG_RQ_BW_WR_UBOUND29                               0x1202a4
/* [RW 7] Bandwidth upper bound for VQ30 */
#define PXP2_REG_RQ_BW_WR_UBOUND30                               0x1202a8
/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR                         0x120008
/* [RW 2] Endian mode for cdu */
#define PXP2_REG_RQ_CDU_ENDIAN_M                                 0x1201a0
#define PXP2_REG_RQ_CDU_FIRST_ILT                                0x12061c
#define PXP2_REG_RQ_CDU_LAST_ILT                                 0x120620
/* [RW 4] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
 * -128k; -256k; -512k; -1M; -2M; 0-4M
 */
#define PXP2_REG_RQ_CDU_P_SIZE                                   0x120018
/* [R 1] 1' indicates that the requester has finished its internal
 * configuration
 */
#define PXP2_REG_RQ_CFG_DONE                                     0x1201b4
/* [RW 2] Endian mode for debug */
#define PXP2_REG_RQ_DBG_ENDIAN_M                                 0x1201a4
/* [RW 1] When '1'; requests will enter input buffers but wont get out
 * towards the glue
 */
#define PXP2_REG_RQ_DISABLE_INPUTS                               0x120330
/* [RW 4] Determines alignment of write SRs when a request is split into
 * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
 * aligned. 4 - 512B aligned.
 */
#define PXP2_REG_RQ_DRAM_ALIGN                                   0x1205b0
/* [RW 4] Determines alignment of read SRs when a request is split into
 * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
 * aligned. 4 - 512B aligned.
 */
#define PXP2_REG_RQ_DRAM_ALIGN_RD                                0x12092c
/* [RW 1] when set the new alignment method (E2) will be applied; when reset
 * the original alignment method (E1 E1H) will be applied
 */
#define PXP2_REG_RQ_DRAM_ALIGN_SEL                               0x120930
/* [R 32] Status signals in pswrq_garb module */
#define PXP2_REG_RQ_GARB                                         0x120748
/* [RW 2] Endian mode for hc */
#define PXP2_REG_RQ_HC_ENDIAN_M                                  0x1201a8
/* [WB 53] Onchip address table */
#define PXP2_REG_RQ_ONCHIP_AT                                    0x122000
/* [WB 53] Onchip address table - B0 */
#define PXP2_REG_RQ_ONCHIP_AT_B0                                 0x128000
/* [RW 13] Pending read limiter threshold; in Dwords */
#define PXP2_REG_RQ_PDR_LIMIT                                    0x12033c
/* [RW 2] Endian mode for qm */
#define PXP2_REG_RQ_QM_ENDIAN_M                                  0x120194
#define PXP2_REG_RQ_QM_FIRST_ILT                                 0x120634
#define PXP2_REG_RQ_QM_LAST_ILT                                  0x120638
/* [RW 4] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
 * -128k; -256k; -512k; -1M; -2M; 0-4M
 */
#define PXP2_REG_RQ_QM_P_SIZE                                    0x120050
/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
#define PXP2_REG_RQ_RBC_DONE                                     0x1201b0
/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
 * 001:256B; 010: 512B; 11:1K:100:2K; 01:4K
 */
#define PXP2_REG_RQ_RD_MBS0                                      0x120160
/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
 * 001:256B; 010: 512B; 11:1K:100:2K; 01:4K
 */
#define PXP2_REG_RQ_RD_MBS1                                      0x120168
/* [RW 2] Endian mode for src */
#define PXP2_REG_RQ_SRC_ENDIAN_M                                 0x12019c
#define PXP2_REG_RQ_SRC_FIRST_ILT                                0x12063c
#define PXP2_REG_RQ_SRC_LAST_ILT                                 0x120640
/* [RW 4] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
 * -128k; -256k; -512k; -1M; -2M; 0-4M
 */
#define PXP2_REG_RQ_SRC_P_SIZE                                   0x12006c
/* [RW 2] Endian mode for tm */
#define PXP2_REG_RQ_TM_ENDIAN_M                                  0x120198
#define PXP2_REG_RQ_TM_FIRST_ILT                                 0x120644
#define PXP2_REG_RQ_TM_LAST_ILT                                  0x120648
/* [RW 4] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
 * -128k; -256k; -512k; -1M; -2M; 0-4M
 */
#define PXP2_REG_RQ_TM_P_SIZE                                    0x120034
/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY                           0x12080c
/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR                        0x120094
/* [R 8] Number of entries occupied by vq 0 in pswrq memory */
#define PXP2_REG_RQ_VQ0_ENTRY_CNT                                0x120810
/* [R 8] Number of entries occupied by vq 10 in pswrq memory */
#define PXP2_REG_RQ_VQ10_ENTRY_CNT                               0x120818
/* [R 8] Number of entries occupied by vq 11 in pswrq memory */
#define PXP2_REG_RQ_VQ11_ENTRY_CNT                               0x120820
/* [R 8] Number of entries occupied by vq 12 in pswrq memory */
#define PXP2_REG_RQ_VQ12_ENTRY_CNT                               0x120828
/* [R 8] Number of entries occupied by vq 13 in pswrq memory */
#define PXP2_REG_RQ_VQ13_ENTRY_CNT                               0x120830
/* [R 8] Number of entries occupied by vq 14 in pswrq memory */
#define PXP2_REG_RQ_VQ14_ENTRY_CNT                               0x120838
/* [R 8] Number of entries occupied by vq 15 in pswrq memory */
#define PXP2_REG_RQ_VQ15_ENTRY_CNT                               0x120840
/* [R 8] Number of entries occupied by vq 16 in pswrq memory */
#define PXP2_REG_RQ_VQ16_ENTRY_CNT                               0x120848
/* [R 8] Number of entries occupied by vq 17 in pswrq memory */
#define PXP2_REG_RQ_VQ17_ENTRY_CNT                               0x120850
/* [R 8] Number of entries occupied by vq 18 in pswrq memory */
#define PXP2_REG_RQ_VQ18_ENTRY_CNT                               0x120858
/* [R 8] Number of entries occupied by vq 19 in pswrq memory */
#define PXP2_REG_RQ_VQ19_ENTRY_CNT                               0x120860
/* [R 8] Number of entries occupied by vq 1 in pswrq memory */
#define PXP2_REG_RQ_VQ1_ENTRY_CNT                                0x120868
/* [R 8] Number of entries occupied by vq 20 in pswrq memory */
#define PXP2_REG_RQ_VQ20_ENTRY_CNT                               0x120870
/* [R 8] Number of entries occupied by vq 21 in pswrq memory */
#define PXP2_REG_RQ_VQ21_ENTRY_CNT                               0x120878
/* [R 8] Number of entries occupied by vq 22 in pswrq memory */
#define PXP2_REG_RQ_VQ22_ENTRY_CNT                               0x120880
/* [R 8] Number of entries occupied by vq 23 in pswrq memory */
#define PXP2_REG_RQ_VQ23_ENTRY_CNT                               0x120888
/* [R 8] Number of entries occupied by vq 24 in pswrq memory */
#define PXP2_REG_RQ_VQ24_ENTRY_CNT                               0x120890
/* [R 8] Number of entries occupied by vq 25 in pswrq memory */
#define PXP2_REG_RQ_VQ25_ENTRY_CNT                               0x120898
/* [R 8] Number of entries occupied by vq 26 in pswrq memory */
#define PXP2_REG_RQ_VQ26_ENTRY_CNT                               0x1208a0
/* [R 8] Number of entries occupied by vq 27 in pswrq memory */
#define PXP2_REG_RQ_VQ27_ENTRY_CNT                               0x1208a8
/* [R 8] Number of entries occupied by vq 28 in pswrq memory */
#define PXP2_REG_RQ_VQ28_ENTRY_CNT                               0x1208b0
/* [R 8] Number of entries occupied by vq 29 in pswrq memory */
#define PXP2_REG_RQ_VQ29_ENTRY_CNT                               0x1208b8
/* [R 8] Number of entries occupied by vq 2 in pswrq memory */
#define PXP2_REG_RQ_VQ2_ENTRY_CNT                                0x1208c0
/* [R 8] Number of entries occupied by vq 30 in pswrq memory */
#define PXP2_REG_RQ_VQ30_ENTRY_CNT                               0x1208c8
/* [R 8] Number of entries occupied by vq 31 in pswrq memory */
#define PXP2_REG_RQ_VQ31_ENTRY_CNT                               0x1208d0
/* [R 8] Number of entries occupied by vq 3 in pswrq memory */
#define PXP2_REG_RQ_VQ3_ENTRY_CNT                                0x1208d8
/* [R 8] Number of entries occupied by vq 4 in pswrq memory */
#define PXP2_REG_RQ_VQ4_ENTRY_CNT                                0x1208e0
/* [R 8] Number of entries occupied by vq 5 in pswrq memory */
#define PXP2_REG_RQ_VQ5_ENTRY_CNT                                0x1208e8
/* [R 8] Number of entries occupied by vq 6 in pswrq memory */
#define PXP2_REG_RQ_VQ6_ENTRY_CNT                                0x1208f0
/* [R 8] Number of entries occupied by vq 7 in pswrq memory */
#define PXP2_REG_RQ_VQ7_ENTRY_CNT                                0x1208f8
/* [R 8] Number of entries occupied by vq 8 in pswrq memory */
#define PXP2_REG_RQ_VQ8_ENTRY_CNT                                0x120900
/* [R 8] Number of entries occupied by vq 9 in pswrq memory */
#define PXP2_REG_RQ_VQ9_ENTRY_CNT                                0x120908
/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
 * 001:256B; 010: 512B;
 */
#define PXP2_REG_RQ_WR_MBS0                                      0x12015c
/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
 * 001:256B; 010: 512B;
 */
#define PXP2_REG_RQ_WR_MBS1                                      0x120164
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_CDU_MPS                                      0x1205f0
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_CSDM_MPS                                     0x1205d0
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_DBG_MPS                                      0x1205e8
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_DMAE_MPS                                     0x1205ec
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_HC_MPS                                       0x1205c8
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_QM_MPS                                       0x1205dc
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_SRC_MPS                                      0x1205e4
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_TM_MPS                                       0x1205e0
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_TSDM_MPS                                     0x1205d4
/* [RW 9] a. When pxp2.wr_th_mode_usdmdp = 0 (E1.5-65 mode) should be
 * initialized to (MPS/32); b. When pxp2.wr_th_mode_usdmdp = 1 (E1.5-90;
 * enhanced mode) and pxp2.wr_usdmdp_outst_req is different than default (3)
 * should be initialized to (pxp2.wr_usdmdp_outst_req x MPS/32); when
 * pxp2.wr_usdmdp_outst_req is 3 the reset value is the correct
 * configuration
 */
#define PXP2_REG_WR_USDMDP_TH                                    0x120348
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_USDM_MPS                                     0x1205cc
/* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
 * buffer reaches this number has_payload will be asserted. 1024B is not a
 * real MPS; it is a way of indicating that the client needs to wait for EOP
 * before asserting has_payload. Register should be initialized according to
 * has_payload value.
 */
#define PXP2_REG_WR_XSDM_MPS                                     0x1205d8
/* [R 1] debug only: Indication if PSWHST arbiter is idle */
#define PXP_REG_HST_ARB_IS_IDLE                                  0x103004
/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
 * this client is waiting for the arbiter.
 */
#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB                       0x103008
/* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue
 * block. Should be used for close the gates.
 */
#define PXP_REG_HST_DISCARD_DOORBELLS                            0x1030a4
/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
 * should update according to 'hst_discard_doorbells' register when the state
 * machine is idle
 */
#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS                     0x1030a0
/* [RW 1] When 1; new internal writes arriving to the block are discarded.
 * Should be used for close the gates.
 */
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES                      0x1030a8
/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
 * means this PSWHST is discarding inputs from this client. Each bit should
 * update according to 'hst_discard_internal_writes' register when the state
 * machine is idle.
 */
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS               0x10309c
/* [R 1] 1 - An incorrect access is logged. The valid bit is reset when the
 * relevant interrupt register is read (PXP_REG_INT_STS_CLR_1)
 */
#define PXP_REG_HST_INCORRECT_ACCESS_VALID                       0x1030cc
/* [R 1] 1- permission violation data is logged. The valid bit is reset when
 * the relevant interrupt register is read (PXP_REG_INT_STS_CLR_1)
 */
#define PXP_REG_HST_PER_VIOLATION_VALID                          0x1030e0
/* [R 15] The FID of the first access to a disabled VF; the format is
 * [14:12] - pfid; [11:6] - vfid; [5] - vf_valid; [4:1] - client (0 USDM; 1
 * CSDM; 2 XSDM; 3 TSDM; 4 HC; 5 GRC; 6 DQ; 7 RESERVED SPACE; 8 ATC); [0] -
 * w_nr(0-read req; 1- write req). The data is written only when the valid
 * bit is reset. and it is stays stable until it is reset by the read from
 * interrupt_clr register
 */
#define PXP_REG_HST_VF_DISABLED_ERROR_DATA                       0x1030b8
/* [R 1] 1 - An error request is logged and wasn't handled yet. The valid
 * bit is reset when the relevant interrupt register is read
 * (PXP_REG_INT_STS_CLR_1)
 */
#define PXP_REG_HST_VF_DISABLED_ERROR_VALID                      0x1030bc
/* [RW 7] Indirect access to the permission table. The fields are : {Valid;
 * VFID[5:0]}
 */
#define PXP_REG_HST_ZONE_PERMISSION_TABLE                        0x103400
/* [RW 32] Interrupt mask register #0 read/write */
#define PXP_REG_PXP_INT_MASK_0                                   0x103074
#define PXP_REG_PXP_INT_MASK_1                                   0x103084
/* [R 32] Interrupt register #0 read */
#define PXP_REG_PXP_INT_STS_0                                    0x103068
#define PXP_REG_PXP_INT_STS_1                                    0x103078
/* [RC 32] Interrupt register #0 read clear */
#define PXP_REG_PXP_INT_STS_CLR_0                                0x10306c
#define PXP_REG_PXP_INT_STS_CLR_1                                0x10307c
/* [RW 27] Parity mask register #0 read/write */
#define PXP_REG_PXP_PRTY_MASK                                    0x103094
/* [R 27] Parity register #0 read */
#define PXP_REG_PXP_PRTY_STS                                     0x103088
/* [RC 27] Parity register #0 read clear */
#define PXP_REG_PXP_PRTY_STS_CLR                                 0x10308c
/* [RW 32] The base logical address (in bytes) of each physical queue. The
 * index I represents the physical queue number. The 12 lsbs are ignore and
 * considered zero so practically there are only 20 bits in this register;
 * queues 63-0
 */
#define QM_REG_BASEADDR                                          0x168900
/* [R 32] NOT USED */
#define QM_REG_BASEADDR_EXT_A                                    0x16e100
/* [R 18] The credit value for byte credit 0. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD0                                          0x16e6fc
/* [R 18] The credit value for byte credit 1. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD1                                          0x16e700
/* [R 18] The credit value for byte credit 2. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD2                                          0x16e704
/* [R 18] The credit value for byte credit 3. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD3                                          0x16e7ac
/* [R 18] The credit value for byte credit 4. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD4                                          0x16e7b0
/* [R 18] The credit value for byte credit 5. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD5                                          0x16e7b4
/* [R 18] The credit value for byte credit 6. The value is 2s complement
 * value (i.e. msb is used for the sign).
 */
#define QM_REG_BYTECRD6                                          0x16e7b8
/* [R 32] NOT USED - removed for E3 B0 */
#define QM_REG_BYTECRDCMDQ_0                                     0x16e6e8
/* [RC 32] byte credit update error register; b2-b0: byte credit id (pbf
 * error); b3 - reserved (zero filled); b6-b4: byte credit id (storm
 * increment error); b7 - reserved (zero filled); b10-b8: byte credit id
 * (storm decrement error); b11 - reserved (zero filled); b12: pbf error
 * valid; b13: storm increment error valid; b14: storm decrement error
 * valid; b15: reserved; b22-b16: byte credit warning (warning = decremented
 * below zero). mask bit per voq counter; b31-b23: reserved; NOTE: VOQ id-s
 * represent HW
 */
#define QM_REG_BYTECRDERRREG                                     0x16e708
/* [RW 17] The initial byte credit value for all counters */
#define QM_REG_BYTECRDINITVAL                                    0x168238
/* [RW 20] The number of connections divided by 16 which dictates the size
 * of each queue which belongs to even function number.
 */
#define QM_REG_CONNNUM_0                                         0x168020
/* [R 6] Keep the fill level of the fifo from write client 4 */
#define QM_REG_CQM_WRC_FIFOLVL                                   0x168018
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ0
 */
#define QM_REG_FWVOQ0TOHWVOQ                                     0x16e7bc
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ1
 */
#define QM_REG_FWVOQ1TOHWVOQ                                     0x16e7c0
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ2
 */
#define QM_REG_FWVOQ2TOHWVOQ                                     0x16e7c4
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ3
 */
#define QM_REG_FWVOQ3TOHWVOQ                                     0x16e7c8
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ4
 */
#define QM_REG_FWVOQ4TOHWVOQ                                     0x16e7cc
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ5
 */
#define QM_REG_FWVOQ5TOHWVOQ                                     0x16e7d0
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ6
 */
#define QM_REG_FWVOQ6TOHWVOQ                                     0x16e7d4
/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
 * FW (virtual) VOQ7
 */
#define QM_REG_FWVOQ7TOHWVOQ                                     0x16e7d8
/* [RC 1] A flag to indicate that overflow error occurred in one of the
 * queues.
 */
#define QM_REG_OVFERROR                                          0x16805c
/* [RC 6] the Q were the qverflow occurs */
#define QM_REG_OVFQNUM                                           0x168058
/* [R 16] Pause state for physical queues 15-0 */
#define QM_REG_PAUSESTATE0                                       0x168410
/* [R 16] Pause state for physical queues 31-16 */
#define QM_REG_PAUSESTATE1                                       0x168414
/* [R 16] Pause state for physical queues 47-32 */
#define QM_REG_PAUSESTATE2                                       0x16e684
/* [R 16] Pause state for physical queues 63-48 */
#define QM_REG_PAUSESTATE3                                       0x16e688
/* [R 16] NOT USED */
#define QM_REG_PAUSESTATE4                                       0x16e68c
/* [R 16] NOT USED */
#define QM_REG_PAUSESTATE5                                       0x16e690
/* [R 16] NOT USED */
#define QM_REG_PAUSESTATE6                                       0x16e694
/* [R 16] NOT USED */
#define QM_REG_PAUSESTATE7                                       0x16e698
#define QM_REG_PF_EN                                             0x16e70c
/* [R 24] The number of tasks stored in the QM for the PF. only even
 * functions are valid in E2 (odd I registers will be hard wired to 0)
 */
#define QM_REG_PF_USG_CNT_0                                      0x16e040
/* [R 16] NOT USED */
#define QM_REG_PORT0BYTECRD                                      0x168300
/* [R 16] NOT USED */
#define QM_REG_PORT1BYTECRD                                      0x168304
/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
 * ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
 * bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank;
 */
#define QM_REG_PTRTBL                                            0x168a00
/* [R 54] NOT USED */
#define QM_REG_PTRTBL_EXT_A                                      0x16e200
/* [RW 14] Interrupt mask register #0 read/write */
#define QM_REG_QM_INT_MASK                                       0x168444
/* [R 14] Interrupt register #0 read */
#define QM_REG_QM_INT_STS                                        0x168438
/* [RC 14] Interrupt register #0 read clear */
#define QM_REG_QM_INT_STS_CLR                                    0x16843c
/* [RW 12] Parity mask register #0 read/write */
#define QM_REG_QM_PRTY_MASK                                      0x168454
/* [R 12] Parity register #0 read */
#define QM_REG_QM_PRTY_STS                                       0x168448
/* [RC 12] Parity register #0 read clear */
#define QM_REG_QM_PRTY_STS_CLR                                   0x16844c
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH                                      0x16802c
/* [R 32] NOT USED */
#define QM_REG_QSTATUS_HIGH_EXT_A                                0x16e408
/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
#define QM_REG_QSTATUS_LOW                                       0x168028
/* [R 32] NOT USED */
#define QM_REG_QSTATUS_LOW_EXT_A                                 0x16e404
/* [R 24] The number of tasks queued for each queue; queues 63-0 */
#define QM_REG_QTASKCTR_0                                        0x168308
/* [R 24] NOT USED */
#define QM_REG_QTASKCTR_EXT_A_0                                  0x16e584
/* [RW 4] Queue tied to VOQ */
#define QM_REG_QVOQIDX_0                                         0x1680f4
/* [RW 1] Initialization bit command */
#define QM_REG_SOFT_RESET                                        0x168428
/* [R 6] Keep the fill level of the fifo from write client 3 */
#define QM_REG_TQM_WRC_FIFOLVL                                   0x168010
/* [R 6] Keep the fill level of the fifo from write client 2 */
#define QM_REG_UQM_WRC_FIFOLVL                                   0x168008
/* [RC 32] VOQ credit update error register; b3-b0: voq id (pbf error);
 * b7-b4: voq id (storm increment error); b11-b8: voq id (storm decrement
 * error); b12: pbf error valid; b13: storm increment error valid; b14:
 * storm decrement error valid; b15: reserved; b27-b16: voq warning
 * (warning = decremented below zero). mask bit per voq counter; b31-b28:
 * reserved; NOTE: VOQ id-s represent HW VOQ id
 */
#define QM_REG_VOQCRDERRREG                                      0x168408
/* [R 17] The credit value for each VOQ. The value is 2s complement value
 * (i.e. msb is used for the sign).
 */
#define QM_REG_VOQCREDIT_0                                       0x1682d0
#define QM_REG_VOQCREDIT_1                                       0x1682d4
#define QM_REG_VOQCREDIT_2                                       0x1682d8
#define QM_REG_VOQCREDIT_3                                       0x1682dc
#define QM_REG_VOQCREDIT_4                                       0x1682e0
#define QM_REG_VOQCREDIT_5                                       0x1682e4
#define QM_REG_VOQCREDIT_6                                       0x1682e8
/* [RW 16] The init and maximum credit for each VoQ */
#define QM_REG_VOQINITCREDIT_0                                   0x168060
#define QM_REG_VOQINITCREDIT_1                                   0x168064
#define QM_REG_VOQINITCREDIT_2                                   0x168068
#define QM_REG_VOQINITCREDIT_3                                   0x16806c
#define QM_REG_VOQINITCREDIT_4                                   0x168070
#define QM_REG_VOQINITCREDIT_5                                   0x168074
#define QM_REG_VOQINITCREDIT_6                                   0x168078
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_0_LSB                                    0x168240
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL                                   0x168000
/* [W 1] reset to parity interrupt */
#define SEM_FAST_REG_PARITY_RST                                  0x18840
/* [RW 1] Interrupt mask register #0 read/write */
#define SEM_FAST_REG_SEM_FAST_INT_MASK                           0x1fff0
/* [R 1] Interrupt register #0 read */
#define SEM_FAST_REG_SEM_FAST_INT_STS                            0x1fffc
/* [RC 1] Interrupt register #0 read clear */
#define SEM_FAST_REG_SEM_FAST_INT_STS_CLR                        0x1fff8
/* [RW 1] Parity mask register #0 read/write */
#define SEM_FAST_REG_SEM_FAST_PRTY_MASK                          0x1ffe0
/* [R 1] Parity register #0 read */
#define SEM_FAST_REG_SEM_FAST_PRTY_STS                           0x1ffec
/* [RC 1] Parity register #0 read clear */
#define SEM_FAST_REG_SEM_FAST_PRTY_STS_CLR                       0x1ffe8
#define SRC_REG_COUNTFREE0                                       0x40500
#define SRC_REG_FIRSTFREE0                                       0x40510
#define SRC_REG_KEYRSS0_0                                        0x40408
#define SRC_REG_KEYRSS0_7                                        0x40424
#define SRC_REG_KEYSEARCH_0                                      0x40458
#define SRC_REG_KEYSEARCH_1                                      0x4045c
#define SRC_REG_KEYSEARCH_2                                      0x40460
#define SRC_REG_KEYSEARCH_3                                      0x40464
#define SRC_REG_KEYSEARCH_4                                      0x40468
#define SRC_REG_KEYSEARCH_5                                      0x4046c
#define SRC_REG_KEYSEARCH_6                                      0x40470
#define SRC_REG_KEYSEARCH_7                                      0x40474
#define SRC_REG_KEYSEARCH_8                                      0x40478
#define SRC_REG_KEYSEARCH_9                                      0x4047c
#define SRC_REG_LASTFREE0                                        0x40530
#define SRC_REG_NUMBER_HASH_BITS0                                0x40400
/* [RW 1] Reset internal state machines. */
#define SRC_REG_SOFT_RST                                         0x4049c
/* [RW 3] Interrupt mask register #0 read/write */
#define SRC_REG_SRC_INT_MASK                                     0x404b8
/* [R 3] Interrupt register #0 read */
#define SRC_REG_SRC_INT_STS                                      0x404ac
/* [RC 3] Interrupt register #0 read clear */
#define SRC_REG_SRC_INT_STS_CLR                                  0x404b0
/* [RW 3] Parity mask register #0 read/write */
#define SRC_REG_SRC_PRTY_MASK                                    0x404c8
/* [R 3] Parity register #0 read */
#define SRC_REG_SRC_PRTY_STS                                     0x404bc
/* [RC 3] Parity register #0 read clear */
#define SRC_REG_SRC_PRTY_STS_CLR                                 0x404c0
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
#define TCM_REG_CAM_OCCUP                                        0x5017c
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 1 at start-up.
 */
#define TCM_REG_CFC_INIT_CRD                                     0x50204
/* [RC 1] Message length mismatch (relative to last indication) at the In#9
 * interface.
 */
#define TCM_REG_CSEM_LENGTH_MIS                                  0x50174
/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define TCM_REG_FIC0_INIT_CRD                                    0x5020c
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define TCM_REG_FIC1_INIT_CRD                                    0x50210
/* [RC 1] Message length mismatch (relative to last indication) at the In#7
 * interface.
 */
#define TCM_REG_PBF_LENGTH_MIS                                   0x5016c
/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
 * acknowledge output is deasserted; all other signals are treated as usual;
 * if 1 - normal activity.
 */
#define TCM_REG_PRS_IFEN                                         0x50020
/* [RC 1] Message length mismatch (relative to last indication) at the In#6
 * interface.
 */
#define TCM_REG_PRS_LENGTH_MIS                                   0x50168
/* [RC 1] Message length mismatch (relative to last indication) at the STORM
 * interface.
 */
#define TCM_REG_STORM_LENGTH_MIS                                 0x50160
/* [RW 11] Interrupt mask register #0 read/write */
#define TCM_REG_TCM_INT_MASK                                     0x501dc
/* [R 11] Interrupt register #0 read */
#define TCM_REG_TCM_INT_STS                                      0x501d0
/* [RC 11] Interrupt register #0 read clear */
#define TCM_REG_TCM_INT_STS_CLR                                  0x501d4
/* [RW 27] Parity mask register #0 read/write */
#define TCM_REG_TCM_PRTY_MASK                                    0x501ec
/* [R 27] Parity register #0 read */
#define TCM_REG_TCM_PRTY_STS                                     0x501e0
/* [RC 27] Parity register #0 read clear */
#define TCM_REG_TCM_PRTY_STS_CLR                                 0x501e4
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 32 at start-up.
 */
#define TCM_REG_TQM_INIT_CRD                                     0x5021c
/* [RC 1] Message length mismatch (relative to last indication) at the SDM
 * interface.
 */
#define TCM_REG_TSDM_LENGTH_MIS                                  0x50164
/* [RC 1] Message length mismatch (relative to last indication) at the In#8
 * interface.
 */
#define TCM_REG_USEM_LENGTH_MIS                                  0x50170
/* [RW 21] Indirect access to the descriptor table of the XX protection
 * mechanism. The fields are: [5:0] - length of the message; 15:6] - message
 * pointer; 20:16] - next pointer.
 */
#define TCM_REG_XX_DESCR_TABLE                                   0x50280
#define TCM_REG_XX_DESCR_TABLE_SIZE                              29
/* [R 6] Use to read the value of XX protection Free counter. */
#define TCM_REG_XX_FREE                                          0x50178
#define TM_REG_EN_LINEAR0_TIMER                                  0x164014
/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
#define TM_REG_LIN0_MAX_ACTIVE_CID                               0x164048
/* [ST 16] Linear0 Number of scans counter. */
#define TM_REG_LIN0_NUM_SCANS                                    0x1640a0
#define TM_REG_LIN0_SCAN_ON                                      0x1640d0
/* [RW 24] Linear0 array scan timeout. */
#define TM_REG_LIN0_SCAN_TIME                                    0x16403c
#define TM_REG_LIN0_VNIC_UC                                      0x164128
/* [RW 1] Interrupt mask register #0 read/write */
#define TM_REG_TM_INT_MASK                                       0x1640fc
/* [R 1] Interrupt register #0 read */
#define TM_REG_TM_INT_STS                                        0x1640f0
/* [RC 1] Interrupt register #0 read clear */
#define TM_REG_TM_INT_STS_CLR                                    0x1640f4
/* [RW 7] Parity mask register #0 read/write */
#define TM_REG_TM_PRTY_MASK                                      0x16410c
/* [R 7] Parity register #0 read */
#define TM_REG_TM_PRTY_STS                                       0x164100
/* [RC 7] Parity register #0 read clear */
#define TM_REG_TM_PRTY_STS_CLR                                   0x164104
#define TSDM_REG_ENABLE_IN1                                      0x42238
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0x42548
/* [R 1] parser fifo empty in sdm_sync block */
#define TSDM_REG_SYNC_PARSER_EMPTY                               0x42550
/* [R 1] parser serial fifo empty in sdm_sync block */
#define TSDM_REG_SYNC_SYNC_EMPTY                                 0x42558
/* [RW 32] Interrupt mask register #0 read/write */
#define TSDM_REG_TSDM_INT_MASK_0                                 0x4229c
#define TSDM_REG_TSDM_INT_MASK_1                                 0x422ac
/* [R 32] Interrupt register #0 read */
#define TSDM_REG_TSDM_INT_STS_0                                  0x42290
#define TSDM_REG_TSDM_INT_STS_1                                  0x422a0
/* [RC 32] Interrupt register #0 read clear */
#define TSDM_REG_TSDM_INT_STS_CLR_0                              0x42294
#define TSDM_REG_TSDM_INT_STS_CLR_1                              0x422a4
/* [RW 11] Parity mask register #0 read/write */
#define TSDM_REG_TSDM_PRTY_MASK                                  0x422bc
/* [R 11] Parity register #0 read */
#define TSDM_REG_TSDM_PRTY_STS                                   0x422b0
/* [RC 11] Parity register #0 read clear */
#define TSDM_REG_TSDM_PRTY_STS_CLR                               0x422b4
/* [RW 32] This address space contains all registers and memories that are
 * placed in SEM_FAST block. The SEM_FAST registers are described in
 * appendix B. In order to access the SEM_FAST registers the base address
 * TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each
 * SEM_FAST register offset.
 */
#define TSEM_REG_FAST_MEMORY                                     0x1a0000
/* [RW 15] Interrupt table Read and write access to it is not possible in
 * the middle of the work
 */
#define TSEM_REG_INT_TABLE                                       0x180400
/* [WB 128] Debug only. Passive buffer memory */
#define TSEM_REG_PASSIVE_BUFFER                                  0x181000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define TSEM_REG_PRAM                                            0x1c0000
/* [R 20] Valid sleeping threads indication have bit per thread */
#define TSEM_REG_SLEEP_THREADS_VALID                             0x18026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define TSEM_REG_SLOW_EXT_STORE_EMPTY                            0x1802a0
/* [RW 32] Interrupt mask register #0 read/write */
#define TSEM_REG_TSEM_INT_MASK_0                                 0x180100
#define TSEM_REG_TSEM_INT_MASK_1                                 0x180110
/* [R 32] Interrupt register #0 read */
#define TSEM_REG_TSEM_INT_STS_0                                  0x1800f4
#define TSEM_REG_TSEM_INT_STS_1                                  0x180104
/* [RC 32] Interrupt register #0 read clear */
#define TSEM_REG_TSEM_INT_STS_CLR_0                              0x1800f8
#define TSEM_REG_TSEM_INT_STS_CLR_1                              0x180108
/* [RW 32] Parity mask register #0 read/write */
#define TSEM_REG_TSEM_PRTY_MASK_0                                0x180120
#define TSEM_REG_TSEM_PRTY_MASK_1                                0x180130
/* [R 32] Parity register #0 read */
#define TSEM_REG_TSEM_PRTY_STS_0                                 0x180114
#define TSEM_REG_TSEM_PRTY_STS_1                                 0x180124
/* [RC 32] Parity register #0 read clear */
#define TSEM_REG_TSEM_PRTY_STS_CLR_0                             0x180118
#define TSEM_REG_TSEM_PRTY_STS_CLR_1                             0x180128
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
 */
#define TSEM_REG_VFPF_ERR_NUM                                    0x180380
/* [R 5] Used to read the XX protection CAM occupancy counter. */
#define UCM_REG_CAM_OCCUP                                        0xe0170
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 1 at start-up.
 */
#define UCM_REG_CFC_INIT_CRD                                     0xe0204
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the csem interface is detected.
 */
#define UCM_REG_CSEM_LENGTH_MIS                                  0xe0160
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the dorq interface is detected.
 */
#define UCM_REG_DORQ_LENGTH_MIS                                  0xe0168
/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define UCM_REG_FIC0_INIT_CRD                                    0xe020c
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define UCM_REG_FIC1_INIT_CRD                                    0xe0210
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the STORM interface is detected.
 */
#define UCM_REG_STORM_LENGTH_MIS                                 0xe0154
/* [RW 4] Timers output initial credit. Max credit available - 15.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 4 at start-up.
 */
#define UCM_REG_TM_INIT_CRD                                      0xe021c
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the tsem interface is detected.
 */
#define UCM_REG_TSEM_LENGTH_MIS                                  0xe015c
/* [RW 11] Interrupt mask register #0 read/write */
#define UCM_REG_UCM_INT_MASK                                     0xe01d4
/* [R 11] Interrupt register #0 read */
#define UCM_REG_UCM_INT_STS                                      0xe01c8
/* [RC 11] Interrupt register #0 read clear */
#define UCM_REG_UCM_INT_STS_CLR                                  0xe01cc
/* [RW 27] Parity mask register #0 read/write */
#define UCM_REG_UCM_PRTY_MASK                                    0xe01e4
/* [R 27] Parity register #0 read */
#define UCM_REG_UCM_PRTY_STS                                     0xe01d8
/* [RC 27] Parity register #0 read clear */
#define UCM_REG_UCM_PRTY_STS_CLR                                 0xe01dc
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 32 at start-up.
 */
#define UCM_REG_UQM_INIT_CRD                                     0xe0220
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the SDM interface is detected.
 */
#define UCM_REG_USDM_LENGTH_MIS                                  0xe0158
/* [RC 1] Set when the message length mismatch (relative to last indication)
 * at the xsem interface isdetected.
 */
#define UCM_REG_XSEM_LENGTH_MIS                                  0xe0164
/* [RW 20] Indirect access to the descriptor table of the XX protection
 * mechanism. The fields are:[5:0] - message length; 14:6] - message
 * pointer; 19:15] - next pointer.
 */
#define UCM_REG_XX_DESCR_TABLE                                   0xe0280
#define UCM_REG_XX_DESCR_TABLE_SIZE                              27
/* [R 6] Use to read the XX protection Free counter. */
#define UCM_REG_XX_FREE                                          0xe016c
#define UMAC_COMMAND_CONFIG_REG_HD_ENA                           (0x1 << 10)
#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE                  (0x1 << 28)
#define UMAC_COMMAND_CONFIG_REG_LOOP_ENA                         (0x1 << 15)
#define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK                    (0x1 << 24)
#define UMAC_COMMAND_CONFIG_REG_PAD_EN                           (0x1 << 5)
#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE                     (0x1 << 8)
#define UMAC_COMMAND_CONFIG_REG_PROMIS_EN                        (0x1 << 4)
#define UMAC_COMMAND_CONFIG_REG_RX_ENA                           (0x1 << 1)
#define UMAC_COMMAND_CONFIG_REG_SW_RESET                         (0x1 << 13)
#define UMAC_COMMAND_CONFIG_REG_TX_ENA                           (0x1 << 0)
#define UMAC_REG_COMMAND_CONFIG                                  0x8
/* [RW 16] This is the duration for which MAC must wait to go back to ACTIVE
 * state from LPI state when it receives packet for transmission. The
 * decrement unit is 1 micro-second.
 */
#define UMAC_REG_EEE_WAKE_TIMER                                  0x6c
/* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers
 * to bit 17 of the MAC address etc.
 */
#define UMAC_REG_MAC_ADDR0                                       0xc
/* [RW 16] Register Bit 0 refers to Bit 0 of the MAC address; Register Bit 1
 * refers to Bit 1 of the MAC address etc. Bits 16 to 31 are reserved.
 */
#define UMAC_REG_MAC_ADDR1                                       0x10
/* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive
 * logic to check frames.
 */
#define UMAC_REG_MAXFR                                           0x14
#define UMAC_REG_UMAC_EEE_CTRL                                   0x64
#define UMAC_UMAC_EEE_CTRL_REG_EEE_EN                            (0x1 << 3)
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0xc4550
/* [R 1] parser fifo empty in sdm_sync block */
#define USDM_REG_SYNC_PARSER_EMPTY                               0xc4558
/* [R 1] parser serial fifo empty in sdm_sync block */
#define USDM_REG_SYNC_SYNC_EMPTY                                 0xc4560
/* [RW 32] Interrupt mask register #0 read/write */
#define USDM_REG_USDM_INT_MASK_0                                 0xc42a0
#define USDM_REG_USDM_INT_MASK_1                                 0xc42b0
/* [R 32] Interrupt register #0 read */
#define USDM_REG_USDM_INT_STS_0                                  0xc4294
#define USDM_REG_USDM_INT_STS_1                                  0xc42a4
/* [RC 32] Interrupt register #0 read clear */
#define USDM_REG_USDM_INT_STS_CLR_0                              0xc4298
#define USDM_REG_USDM_INT_STS_CLR_1                              0xc42a8
/* [RW 11] Parity mask register #0 read/write */
#define USDM_REG_USDM_PRTY_MASK                                  0xc42c0
/* [R 11] Parity register #0 read */
#define USDM_REG_USDM_PRTY_STS                                   0xc42b4
/* [RC 11] Parity register #0 read clear */
#define USDM_REG_USDM_PRTY_STS_CLR                               0xc42b8
/* [RW 32] This address space contains all registers and memories that are
 * placed in SEM_FAST block. The SEM_FAST registers are described in
 * appendix B. In order to access the SEM_FAST registers the base address
 * USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each
 * SEM_FAST register offset.
 */
#define USEM_REG_FAST_MEMORY                                     0x320000
/* [RW 15] Interrupt table Read and write access to it is not possible in
 * the middle of the work
 */
#define USEM_REG_INT_TABLE                                       0x300400
/* [WB 128] Debug only. Passive buffer memory */
#define USEM_REG_PASSIVE_BUFFER                                  0x302000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define USEM_REG_PRAM                                            0x340000
/* [R 20] Valid sleeping threads indication have bit per thread */
#define USEM_REG_SLEEP_THREADS_VALID                             0x30026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define USEM_REG_SLOW_EXT_STORE_EMPTY                            0x3002a0
/* [RW 32] Interrupt mask register #0 read/write */
#define USEM_REG_USEM_INT_MASK_0                                 0x300110
#define USEM_REG_USEM_INT_MASK_1                                 0x300120
/* [R 32] Interrupt register #0 read */
#define USEM_REG_USEM_INT_STS_0                                  0x300104
#define USEM_REG_USEM_INT_STS_1                                  0x300114
/* [RC 32] Interrupt register #0 read clear */
#define USEM_REG_USEM_INT_STS_CLR_0                              0x300108
#define USEM_REG_USEM_INT_STS_CLR_1                              0x300118
/* [RW 32] Parity mask register #0 read/write */
#define USEM_REG_USEM_PRTY_MASK_0                                0x300130
#define USEM_REG_USEM_PRTY_MASK_1                                0x300140
/* [R 32] Parity register #0 read */
#define USEM_REG_USEM_PRTY_STS_0                                 0x300124
#define USEM_REG_USEM_PRTY_STS_1                                 0x300134
/* [RC 32] Parity register #0 read clear */
#define USEM_REG_USEM_PRTY_STS_CLR_0                             0x300128
#define USEM_REG_USEM_PRTY_STS_CLR_1                             0x300138
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
 */
#define USEM_REG_VFPF_ERR_NUM                                    0x300380
#define VFC_MEMORIES_RST_REG_CAM_RST                             (0x1 << 0)
#define VFC_MEMORIES_RST_REG_RAM_RST                             (0x1 << 1)
#define VFC_REG_MEMORIES_RST                                     0x1943c
/* [RW 1] Interrupt mask register #0 read/write */
#define VFC_REG_VFC_INT_MASK                                     0x194f0
/* [R 1] Interrupt register #0 read */
#define VFC_REG_VFC_INT_STS                                      0x194fc
/* [RC 1] Interrupt register #0 read clear */
#define VFC_REG_VFC_INT_STS_CLR                                  0x194f8
/* [RW 1] Parity mask register #0 read/write */
#define VFC_REG_VFC_PRTY_MASK                                    0x194e0
/* [R 1] Parity register #0 read */
#define VFC_REG_VFC_PRTY_STS                                     0x194ec
/* [RC 1] Parity register #0 read clear */
#define VFC_REG_VFC_PRTY_STS_CLR                                 0x194e8
/* [R 5] Used to read the XX protection CAM occupancy counter. */
#define XCM_REG_CAM_OCCUP                                        0x20244
/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 1 at start-up.
 */
#define XCM_REG_CFC_INIT_CRD                                     0x20404
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the csem interface.
 */
#define XCM_REG_CSEM_LENGTH_MIS                                  0x20228
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the dorq interface.
 */
#define XCM_REG_DORQ_LENGTH_MIS                                  0x20230
/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define XCM_REG_FIC0_INIT_CRD                                    0x2040c
/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 64 at start-up.
 */
#define XCM_REG_FIC1_INIT_CRD                                    0x20410
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0                            0x20118
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the nig0 interface.
 */
#define XCM_REG_NIG0_LENGTH_MIS                                  0x20238
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the nig1 interface.
 */
#define XCM_REG_NIG1_LENGTH_MIS                                  0x2023c
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the pbf interface.
 */
#define XCM_REG_PBF_LENGTH_MIS                                   0x20234
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the STORM interface.
 */
#define XCM_REG_STORM_LENGTH_MIS                                 0x2021c
/* [RW 4] Timers output initial credit. Max credit available - 15.Write
 * writes the initial credit value; read returns the current value of the
 * credit counter. Must be initialized to 4 at start-up.
 */
#define XCM_REG_TM_INIT_CRD                                      0x2041c
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the tsem interface.
 */
#define XCM_REG_TSEM_LENGTH_MIS                                  0x20224
/* [RC 1] Message length mismatch (relative to last indication) at the usem
 * interface.
 */
#define XCM_REG_USEM_LENGTH_MIS                                  0x2022c
#define XCM_REG_WU_DA_CNT_CMD00                                  0x201d4
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00                      0x201c4
/* [RW 14] Interrupt mask register #0 read/write */
#define XCM_REG_XCM_INT_MASK                                     0x202b4
/* [R 14] Interrupt register #0 read */
#define XCM_REG_XCM_INT_STS                                      0x202a8
/* [RC 14] Interrupt register #0 read clear */
#define XCM_REG_XCM_INT_STS_CLR                                  0x202ac
/* [RW 30] Parity mask register #0 read/write */
#define XCM_REG_XCM_PRTY_MASK                                    0x202c4
/* [R 30] Parity register #0 read */
#define XCM_REG_XCM_PRTY_STS                                     0x202b8
/* [RC 30] Parity register #0 read clear */
#define XCM_REG_XCM_PRTY_STS_CLR                                 0x202bc
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
 * the initial credit value; read returns the current value of the credit
 * counter. Must be initialized to 32 at start-up.
 */
#define XCM_REG_XQM_INIT_CRD                                     0x20420
/* [RC 1] Set at message length mismatch (relative to last indication) at
 * the SDM interface.
 */
#define XCM_REG_XSDM_LENGTH_MIS                                  0x20220
/* [RW 17] Indirect access to the descriptor table of the XX protection
 * mechanism. The fields are: [5:0] - message length; 11:6] - message
 * pointer; 16:12] - next pointer.
 */
#define XCM_REG_XX_DESCR_TABLE                                   0x20480
#define XCM_REG_XX_DESCR_TABLE_SIZE                              32
/* [R 6] Used to read the XX protection Free counter. */
#define XCM_REG_XX_FREE                                          0x20240
#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS    (0x1 << 0)
#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS   (0x1 << 1)
#define XMAC_CTRL_REG_LINE_LOCAL_LPBK                            (0x1 << 2)
#define XMAC_CTRL_REG_RX_EN                                      (0x1 << 1)
#define XMAC_CTRL_REG_SOFT_RESET                                 (0x1 << 6)
#define XMAC_CTRL_REG_TX_EN                                      (0x1 << 0)
#define XMAC_CTRL_REG_XLGMII_ALIGN_ENB                           (0x1 << 7)
#define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN                          (0x1 << 18)
#define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN                          (0x1 << 17)
#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON                       (0x1 << 1)
#define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN                      (0x1 << 0)
#define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN                        (0x1 << 3)
#define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN                           (0x1 << 4)
#define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN                           (0x1 << 5)
#define XMAC_REG_CLEAR_RX_LSS_STATUS                             0x60
#define XMAC_REG_CTRL                                            0
/* [RW 16] Upper 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC
 * packets transmitted by the MAC
 */
#define XMAC_REG_CTRL_SA_HI                                      0x2c
/* [RW 32] Lower 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC
 * packets transmitted by the MAC
 */
#define XMAC_REG_CTRL_SA_LO                                      0x28
#define XMAC_REG_EEE_CTRL                                        0xd8
#define XMAC_REG_EEE_TIMERS_HI                                   0xe4
#define XMAC_REG_PAUSE_CTRL                                      0x68
#define XMAC_REG_PFC_CTRL                                        0x70
#define XMAC_REG_PFC_CTRL_HI                                     0x74
#define XMAC_REG_RX_LSS_CTRL                                     0x50
#define XMAC_REG_RX_LSS_STATUS                                   0x58
/* [RW 14] Maximum packet size in receive direction; exclusive of preamble &
 * CRC in strip mode
 */
#define XMAC_REG_RX_MAX_SIZE                                     0x40
#define XMAC_REG_TX_CTRL                                         0x20
#define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE                 (0x1 << 0)
#define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE                (0x1 << 1)
/* [W 17] Generate an operation after completion; bit-16 is
 * AggVectIdx_valid; bits 15:8 are AggVectIdx; bits 7:5 are the TRIG and
 * bits 4:0 are the T124Param[4:0]
 */
#define XSDM_REG_OPERATION_GEN                                   0x1664c4
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0x166548
/* [R 1] parser fifo empty in sdm_sync block */
#define XSDM_REG_SYNC_PARSER_EMPTY                               0x166550
/* [R 1] parser serial fifo empty in sdm_sync block */
#define XSDM_REG_SYNC_SYNC_EMPTY                                 0x166558
/* [RW 32] Interrupt mask register #0 read/write */
#define XSDM_REG_XSDM_INT_MASK_0                                 0x16629c
#define XSDM_REG_XSDM_INT_MASK_1                                 0x1662ac
/* [R 32] Interrupt register #0 read */
#define XSDM_REG_XSDM_INT_STS_0                                  0x166290
#define XSDM_REG_XSDM_INT_STS_1                                  0x1662a0
/* [RC 32] Interrupt register #0 read clear */
#define XSDM_REG_XSDM_INT_STS_CLR_0                              0x166294
#define XSDM_REG_XSDM_INT_STS_CLR_1                              0x1662a4
/* [RW 11] Parity mask register #0 read/write */
#define XSDM_REG_XSDM_PRTY_MASK                                  0x1662bc
/* [R 11] Parity register #0 read */
#define XSDM_REG_XSDM_PRTY_STS                                   0x1662b0
/* [RC 11] Parity register #0 read clear */
#define XSDM_REG_XSDM_PRTY_STS_CLR                               0x1662b4
/* [RW 32] This address space contains all registers and memories that are
 * placed in SEM_FAST block. The SEM_FAST registers are described in
 * appendix B. In order to access the SEM_FAST registers the base address
 * XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each
 * SEM_FAST register offset.
 */
#define XSEM_REG_FAST_MEMORY                                     0x2a0000
/* [RW 15] Interrupt table Read and write access to it is not possible in
 * the middle of the work
 */
#define XSEM_REG_INT_TABLE                                       0x280400
/* [WB 128] Debug only. Passive buffer memory */
#define XSEM_REG_PASSIVE_BUFFER                                  0x282000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define XSEM_REG_PRAM                                            0x2c0000
/* [R 20] Valid sleeping threads indication have bit per thread */
#define XSEM_REG_SLEEP_THREADS_VALID                             0x28026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define XSEM_REG_SLOW_EXT_STORE_EMPTY                            0x2802a0
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
 */
#define XSEM_REG_VFPF_ERR_NUM                                    0x280380
/* [RW 32] Interrupt mask register #0 read/write */
#define XSEM_REG_XSEM_INT_MASK_0                                 0x280110
#define XSEM_REG_XSEM_INT_MASK_1                                 0x280120
/* [R 32] Interrupt register #0 read */
#define XSEM_REG_XSEM_INT_STS_0                                  0x280104
#define XSEM_REG_XSEM_INT_STS_1                                  0x280114
/* [RC 32] Interrupt register #0 read clear */
#define XSEM_REG_XSEM_INT_STS_CLR_0                              0x280108
#define XSEM_REG_XSEM_INT_STS_CLR_1                              0x280118
/* [RW 32] Parity mask register #0 read/write */
#define XSEM_REG_XSEM_PRTY_MASK_0                                0x280130
#define XSEM_REG_XSEM_PRTY_MASK_1                                0x280140
/* [R 32] Parity register #0 read */
#define XSEM_REG_XSEM_PRTY_STS_0                                 0x280124
#define XSEM_REG_XSEM_PRTY_STS_1                                 0x280134
/* [RC 32] Parity register #0 read clear */
#define XSEM_REG_XSEM_PRTY_STS_CLR_0                             0x280128
#define XSEM_REG_XSEM_PRTY_STS_CLR_1                             0x280138
#define MCPR_ACCESS_LOCK_LOCK                                    (1L << 31)
#define MCPR_IMC_COMMAND_ENABLE                                  (1L << 31)
#define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT                     16
#define MCPR_IMC_COMMAND_OPERATION_BITSHIFT                      28
#define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT               8
#define MCPR_NVM_ACCESS_ENABLE_EN                                (1L << 0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN                             (1L << 1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE                            (0xffffffL << 0)
#define MCPR_NVM_CFG4_FLASH_SIZE                                 (0x7L << 0)
#define MCPR_NVM_COMMAND_DOIT                                    (1L << 4)
#define MCPR_NVM_COMMAND_DONE                                    (1L << 3)
#define MCPR_NVM_COMMAND_FIRST                                   (1L << 7)
#define MCPR_NVM_COMMAND_LAST                                    (1L << 8)
#define MCPR_NVM_COMMAND_WR                                      (1L << 5)
#define MCPR_NVM_SW_ARB_ARB_ARB1                                 (1L << 9)
#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1                             (1L << 5)
#define MCPR_NVM_SW_ARB_ARB_REQ_SET1                             (1L << 1)
#define BIGMAC_REGISTER_BMAC_CONTROL                             (0x00 << 3)
#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL                        (0x01 << 3)
#define BIGMAC_REGISTER_CNT_MAX_SIZE                             (0x05 << 3)
#define BIGMAC_REGISTER_RX_CONTROL                               (0x21 << 3)
#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS                         (0x46 << 3)
#define BIGMAC_REGISTER_RX_LSS_STATUS                            (0x43 << 3)
#define BIGMAC_REGISTER_RX_MAX_SIZE                              (0x23 << 3)
#define BIGMAC_REGISTER_RX_STAT_GR64                             (0x26 << 3)
#define BIGMAC_REGISTER_RX_STAT_GRIPJ                            (0x42 << 3)
#define BIGMAC_REGISTER_TX_CONTROL                               (0x07 << 3)
#define BIGMAC_REGISTER_TX_MAX_SIZE                              (0x09 << 3)
#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD                       (0x0A << 3)
#define BIGMAC_REGISTER_TX_SOURCE_ADDR                           (0x08 << 3)
#define BIGMAC_REGISTER_TX_STAT_GTBYT                            (0x20 << 3)
#define BIGMAC_REGISTER_TX_STAT_GTPKT                            (0x0C << 3)
#define BIGMAC2_REGISTER_BMAC_CONTROL                            (0x00 << 3)
#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL                       (0x01 << 3)
#define BIGMAC2_REGISTER_CNT_MAX_SIZE                            (0x05 << 3)
#define BIGMAC2_REGISTER_PFC_CONTROL                             (0x06 << 3)
#define BIGMAC2_REGISTER_RX_CONTROL                              (0x3A << 3)
#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS                        (0x62 << 3)
#define BIGMAC2_REGISTER_RX_LSS_STAT                             (0x3E << 3)
#define BIGMAC2_REGISTER_RX_MAX_SIZE                             (0x3C << 3)
#define BIGMAC2_REGISTER_RX_STAT_GR64                            (0x40 << 3)
#define BIGMAC2_REGISTER_RX_STAT_GRIPJ                           (0x5f << 3)
#define BIGMAC2_REGISTER_TX_CONTROL                              (0x1C << 3)
#define BIGMAC2_REGISTER_TX_MAX_SIZE                             (0x1E << 3)
#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL                        (0x20 << 3)
#define BIGMAC2_REGISTER_TX_SOURCE_ADDR                          (0x1D << 3)
#define BIGMAC2_REGISTER_TX_STAT_GTBYT                           (0x39 << 3)
#define BIGMAC2_REGISTER_TX_STAT_GTPOK                           (0x22 << 3)
#define EMAC_LED_1000MB_OVERRIDE                                 (1L << 1)
#define EMAC_LED_100MB_OVERRIDE                                  (1L << 2)
#define EMAC_LED_10MB_OVERRIDE                                   (1L << 3)
#define EMAC_LED_OVERRIDE                                        (1L << 0)
#define EMAC_MDIO_COMM_COMMAND_ADDRESS                           (0L << 26)
#define EMAC_MDIO_COMM_COMMAND_READ_22                           (2L << 26)
#define EMAC_MDIO_COMM_COMMAND_READ_45                           (3L << 26)
#define EMAC_MDIO_COMM_COMMAND_WRITE_22                          (1L << 26)
#define EMAC_MDIO_COMM_COMMAND_WRITE_45                          (1L << 26)
#define EMAC_MDIO_COMM_DATA                                      (0xffffL << 0)
#define EMAC_MDIO_COMM_START_BUSY                                (1L << 29)
#define EMAC_MDIO_MODE_AUTO_POLL                                 (1L << 4)
#define EMAC_MDIO_MODE_CLAUSE_45                                 (1L << 31)
#define EMAC_MDIO_MODE_CLOCK_CNT                                 (0x3ffL << 16)
#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT                        16
#define EMAC_MDIO_STATUS_10MB                                    (1L << 1)
#define EMAC_MODE_25G_MODE                                       (1L << 5)
#define EMAC_MODE_HALF_DUPLEX                                    (1L << 1)
#define EMAC_MODE_PORT_GMII                                      (2L << 2)
#define EMAC_MODE_PORT_MII                                       (1L << 2)
#define EMAC_MODE_PORT_MII_10M                                   (3L << 2)
#define EMAC_MODE_RESET                                          (1L << 0)
#define EMAC_REG_EMAC_LED                                        0xc
#define EMAC_REG_EMAC_MAC_MATCH                                  0x10
#define EMAC_REG_EMAC_MDIO_COMM                                  0xac
#define EMAC_REG_EMAC_MDIO_MODE                                  0xb4
#define EMAC_REG_EMAC_MDIO_STATUS                                0xb0
#define EMAC_REG_EMAC_MODE                                       0x0
#define EMAC_REG_EMAC_RX_MODE                                    0xc8
#define EMAC_REG_EMAC_RX_MTU_SIZE                                0x9c
#define EMAC_REG_EMAC_RX_STAT_AC                                 0x180
#define EMAC_REG_EMAC_RX_STAT_AC_28                              0x1f4
#define EMAC_REG_EMAC_RX_STAT_AC_COUNT                           23
#define EMAC_REG_EMAC_TX_MODE                                    0xbc
#define EMAC_REG_EMAC_TX_STAT_AC                                 0x280
#define EMAC_REG_EMAC_TX_STAT_AC_COUNT                           22
#define EMAC_REG_RX_PFC_MODE                                     0x320
#define EMAC_REG_RX_PFC_MODE_PRIORITIES                          (1L << 2)
#define EMAC_REG_RX_PFC_MODE_RX_EN                               (1L << 1)
#define EMAC_REG_RX_PFC_MODE_TX_EN                               (1L << 0)
#define EMAC_REG_RX_PFC_PARAM                                    0x324
#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT                    0
#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT               16
#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD                          0x328
#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT                    (0xffff << 0)
#define EMAC_REG_RX_PFC_STATS_XOFF_SENT                          0x330
#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT                    (0xffff << 0)
#define EMAC_REG_RX_PFC_STATS_XON_RCVD                           0x32c
#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT                     (0xffff << 0)
#define EMAC_REG_RX_PFC_STATS_XON_SENT                           0x334
#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT                     (0xffff << 0)
#define EMAC_RX_MODE_FLOW_EN                                     (1L << 2)
#define EMAC_RX_MODE_KEEP_MAC_CONTROL                            (1L << 3)
#define EMAC_RX_MODE_KEEP_VLAN_TAG                               (1L << 10)
#define EMAC_RX_MODE_PROMISCUOUS                                 (1L << 8)
#define EMAC_RX_MODE_RESET                                       (1L << 0)
#define EMAC_RX_MTU_SIZE_JUMBO_ENA                               (1L << 31)
#define EMAC_TX_MODE_EXT_PAUSE_EN                                (1L << 3)
#define EMAC_TX_MODE_FLOW_EN                                     (1L << 4)
#define EMAC_TX_MODE_RESET                                       (1L << 0)
#define MISC_REGISTERS_GPIO_0                                    0
#define MISC_REGISTERS_GPIO_1                                    1
#define MISC_REGISTERS_GPIO_2                                    2
#define MISC_REGISTERS_GPIO_3                                    3
#define MISC_REGISTERS_GPIO_CLR_POS                              16
#define MISC_REGISTERS_GPIO_FLOAT                                (0xffL << 24)
#define MISC_REGISTERS_GPIO_FLOAT_POS                            24
#define MISC_REGISTERS_GPIO_HIGH                                 1
#define MISC_REGISTERS_GPIO_INPUT_HI_Z                           2
#define MISC_REGISTERS_GPIO_INT_CLR_POS                          24
#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR                       0
#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET                       1
#define MISC_REGISTERS_GPIO_INT_SET_POS                          16
#define MISC_REGISTERS_GPIO_LOW                                  0
#define MISC_REGISTERS_GPIO_OUTPUT_HIGH                          1
#define MISC_REGISTERS_GPIO_OUTPUT_LOW                           0
#define MISC_REGISTERS_GPIO_PORT_SHIFT                           4
#define MISC_REGISTERS_GPIO_SET_POS                              8
#define MISC_REGISTERS_RESET_REG_1_CLEAR                         0x588
#define MISC_REGISTERS_RESET_REG_1_RST_BRB1                      (0x1 << 0)
#define MISC_REGISTERS_RESET_REG_1_RST_DORQ                      (0x1 << 19)
#define MISC_REGISTERS_RESET_REG_1_RST_HC                        (0x1 << 29)
#define MISC_REGISTERS_RESET_REG_1_RST_PXP                       (0x1 << 26)
#define MISC_REGISTERS_RESET_REG_1_RST_PXPV                      (0x1 << 27)
#define MISC_REGISTERS_RESET_REG_1_RST_QM                        (0x1 << 17)
#define MISC_REGISTERS_RESET_REG_1_SET                           0x584
#define MISC_REGISTERS_RESET_REG_2_CLEAR                         0x598
#define MISC_REGISTERS_RESET_REG_2_MSTAT0                        (0x1 << 24)
#define MISC_REGISTERS_RESET_REG_2_MSTAT1                        (0x1 << 25)
#define MISC_REGISTERS_RESET_REG_2_PGLC                          (0x1 << 19)
#define MISC_REGISTERS_RESET_REG_2_RST_ATC                       (0x1 << 17)
#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0                     (0x1 << 0)
#define MISC_REGISTERS_RESET_REG_2_RST_BMAC1                     (0x1 << 1)
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0                     (0x1 << 2)
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE           (0x1 << 14)
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1                     (0x1 << 3)
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE           (0x1 << 15)
#define MISC_REGISTERS_RESET_REG_2_RST_GRC                       (0x1 << 4)
#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B     (0x1 << 6)
#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE      (0x1 << 8)
#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU       (0x1 << 7)
#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1 << 5)
#define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE                 (0x1 << 11)
#define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO                  (0x1 << 13)
#define MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR              (0x1 << 16)
#define MISC_REGISTERS_RESET_REG_2_RST_RBCN                      (0x1 << 9)
#define MISC_REGISTERS_RESET_REG_2_SET                           0x594
#define MISC_REGISTERS_RESET_REG_2_UMAC0                         (0x1 << 20)
#define MISC_REGISTERS_RESET_REG_2_UMAC1                         (0x1 << 21)
#define MISC_REGISTERS_RESET_REG_2_XMAC                          (0x1 << 22)
#define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT                     (0x1 << 23)
#define MISC_REGISTERS_RESET_REG_3_CLEAR                         0x5a8
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ     (0x1 << 1)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN   (0x1 << 2)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1 << 3)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW  (0x1 << 0)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ       (0x1 << 5)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN     (0x1 << 6)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD  (0x1 << 7)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW    (0x1 << 4)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1 << 8)
#define MISC_REGISTERS_RESET_REG_3_SET                           0x5a4
#define MISC_SPIO_CLR_POS                                        16
#define MISC_SPIO_FLOAT                                          (0xffL << 24)
#define MISC_SPIO_FLOAT_POS                                      24
#define MISC_SPIO_INPUT_HI_Z                                     2
#define MISC_SPIO_INT_OLD_SET_POS                                16
#define MISC_SPIO_OUTPUT_HIGH                                    1
#define MISC_SPIO_OUTPUT_LOW                                     0
#define MISC_SPIO_SET_POS                                        8
#define MISC_SPIO_SPIO4                                          0x10
#define MISC_SPIO_SPIO5                                          0x20
#define HW_LOCK_MAX_RESOURCE_VALUE                               31
#define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB                          13
#define HW_LOCK_RESOURCE_DRV_FLAGS                               10
#define HW_LOCK_RESOURCE_GPIO                                    1
#define HW_LOCK_RESOURCE_MDIO                                    0
#define HW_LOCK_RESOURCE_NVRAM                                   12
#define HW_LOCK_RESOURCE_PORT0_ATT_MASK                          3
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0                       8
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1                       9
#define HW_LOCK_RESOURCE_RECOVERY_REG                            11
#define HW_LOCK_RESOURCE_RESET                                   5
#define HW_LOCK_RESOURCE_SPIO                                    2
#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT                    (0x1 << 4)
#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR                    (0x1 << 5)
#define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT                    (0x1 << 19)
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR                    (0x1 << 18)
#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT                    (0x1 << 31)
#define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR                    (0x1 << 30)
#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT                    (0x1 << 9)
#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR                    (0x1 << 8)
#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT                    (0x1 << 7)
#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR                    (0x1 << 6)
#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT                   (0x1 << 29)
#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR                   (0x1 << 28)
#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT                  (0x1 << 1)
#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR                  (0x1 << 0)
#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR                  (0x1 << 18)
#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT                   (0x1 << 11)
#define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR                   (0x1 << 10)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT              (0x1 << 13)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR              (0x1 << 12)
#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0                    (0x1 << 2)
#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR                    (0x1 << 12)
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY              (0x1 << 28)
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY            (0x1 << 31)
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY           (0x1 << 29)
#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY           (0x1 << 30)
#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT                   (0x1 << 15)
#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR                   (0x1 << 14)
#define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR                    (0x1 << 14)
#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR                 (0x1 << 20)
#define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT               (0x1 << 31)
#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR               (0x1 << 30)
#define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR                    (0x1 << 0)
#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT                  (0x1 << 2)
#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR                  (0x1 << 3)
#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT      (0x1 << 5)
#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR      (0x1 << 4)
#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT                    (0x1 << 3)
#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR                    (0x1 << 2)
#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT                     (0x1 << 3)
#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR                     (0x1 << 2)
#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR               (0x1 << 22)
#define AEU_INPUTS_ATTN_BITS_SPIO5                               (0x1 << 15)
#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT                    (0x1 << 27)
#define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR                    (0x1 << 26)
#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT                 (0x1 << 5)
#define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR                 (0x1 << 4)
#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT                   (0x1 << 25)
#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR                   (0x1 << 24)
#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT                  (0x1 << 29)
#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR                  (0x1 << 28)
#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT                    (0x1 << 23)
#define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR                    (0x1 << 22)
#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT                    (0x1 << 27)
#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR                    (0x1 << 26)
#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT                   (0x1 << 21)
#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR                   (0x1 << 20)
#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT                  (0x1 << 25)
#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR                  (0x1 << 24)
#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR          (0x1 << 16)
#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT                    (0x1 << 9)
#define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR                    (0x1 << 8)
#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT                   (0x1 << 7)
#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR                   (0x1 << 6)
#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT                  (0x1 << 11)
#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR                  (0x1 << 10)
#define RESERVED_GENERAL_ATTENTION_BIT_0        0

#define EVEREST_GEN_ATTN_IN_USE_MASK            0x7ffe0
#define EVEREST_LATCHED_ATTN_IN_USE_MASK        0xffe00000

#define RESERVED_GENERAL_ATTENTION_BIT_6        6
#define RESERVED_GENERAL_ATTENTION_BIT_7        7
#define RESERVED_GENERAL_ATTENTION_BIT_8        8
#define RESERVED_GENERAL_ATTENTION_BIT_9        9
#define RESERVED_GENERAL_ATTENTION_BIT_10       10
#define RESERVED_GENERAL_ATTENTION_BIT_11       11
#define RESERVED_GENERAL_ATTENTION_BIT_12       12
#define RESERVED_GENERAL_ATTENTION_BIT_13       13
#define RESERVED_GENERAL_ATTENTION_BIT_14       14
#define RESERVED_GENERAL_ATTENTION_BIT_15       15
#define RESERVED_GENERAL_ATTENTION_BIT_16       16
#define RESERVED_GENERAL_ATTENTION_BIT_17       17
#define RESERVED_GENERAL_ATTENTION_BIT_18       18
#define RESERVED_GENERAL_ATTENTION_BIT_19       19
#define RESERVED_GENERAL_ATTENTION_BIT_20       20
#define RESERVED_GENERAL_ATTENTION_BIT_21       21

/* storm asserts attention bits */
#define TSTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_7
#define USTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_8
#define CSTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_9
#define XSTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_10

/* mcp error attention bit */
#define MCP_FATAL_ASSERT_ATTENTION_BIT        RESERVED_GENERAL_ATTENTION_BIT_11

/*E1H NIG status sync attention mapped to group 4-7*/
#define LINK_SYNC_ATTENTION_BIT_FUNC_0      RESERVED_GENERAL_ATTENTION_BIT_12
#define LINK_SYNC_ATTENTION_BIT_FUNC_1      RESERVED_GENERAL_ATTENTION_BIT_13
#define LINK_SYNC_ATTENTION_BIT_FUNC_2      RESERVED_GENERAL_ATTENTION_BIT_14
#define LINK_SYNC_ATTENTION_BIT_FUNC_3      RESERVED_GENERAL_ATTENTION_BIT_15
#define LINK_SYNC_ATTENTION_BIT_FUNC_4      RESERVED_GENERAL_ATTENTION_BIT_16
#define LINK_SYNC_ATTENTION_BIT_FUNC_5      RESERVED_GENERAL_ATTENTION_BIT_17
#define LINK_SYNC_ATTENTION_BIT_FUNC_6      RESERVED_GENERAL_ATTENTION_BIT_18
#define LINK_SYNC_ATTENTION_BIT_FUNC_7      RESERVED_GENERAL_ATTENTION_BIT_19

        /* Used For Error Recovery: changing this will require more \
        changes in code that assume
 * error recovery uses general attn bit20 !
 */
#define ERROR_RECOVERY_ATTENTION_BIT \
        RESERVED_GENERAL_ATTENTION_BIT_20
#define RESERVED_ATTENTION_BIT \
        RESERVED_GENERAL_ATTENTION_BIT_21

#define LATCHED_ATTN_RBCR                       23
#define LATCHED_ATTN_RBCT                       24
#define LATCHED_ATTN_RBCN                       25
#define LATCHED_ATTN_RBCU                       26
#define LATCHED_ATTN_RBCP                       27
#define LATCHED_ATTN_TIMEOUT_GRC                28
#define LATCHED_ATTN_RSVD_GRC                   29
#define LATCHED_ATTN_ROM_PARITY_MCP             30
#define LATCHED_ATTN_UM_RX_PARITY_MCP           31
#define LATCHED_ATTN_UM_TX_PARITY_MCP           32
#define LATCHED_ATTN_SCPAD_PARITY_MCP           33

#define GENERAL_ATTEN_WORD(atten_name)         ((94 + atten_name) / 32)
#define GENERAL_ATTEN_OFFSET(atten_name)       (1UL << ((94 + atten_name) % 32))
/*
 * This file defines GRC base address for every block.
 * This file is included by chipsim, asm microcode and cpp microcode.
 * These values are used in Design.xml on regBase attribute
 * Use the base with the generated offsets of specific registers.
 */

#define GRCBASE_PXPCS       0x000000
#define GRCBASE_PCICONFIG   0x002000
#define GRCBASE_PCIREG      0x002400
#define GRCBASE_EMAC0       0x008000
#define GRCBASE_EMAC1       0x008400
#define GRCBASE_DBU             0x008800
#define GRCBASE_PGLUE_B     0x009000
#define GRCBASE_MISC        0x00A000
#define GRCBASE_DBG             0x00C000
#define GRCBASE_NIG             0x010000
#define GRCBASE_XCM             0x020000
#define GRCBASE_PRS         0x040000
#define GRCBASE_SRCH        0x040400
#define GRCBASE_TSDM        0x042000
#define GRCBASE_TCM             0x050000
#define GRCBASE_BRB1        0x060000
#define GRCBASE_MCP             0x080000
#define GRCBASE_UPB             0x0C1000
#define GRCBASE_CSDM        0x0C2000
#define GRCBASE_USDM        0x0C4000
#define GRCBASE_CCM             0x0D0000
#define GRCBASE_UCM             0x0E0000
#define GRCBASE_CDU             0x101000
#define GRCBASE_DMAE        0x102000
#define GRCBASE_PXP             0x103000
#define GRCBASE_CFC             0x104000
#define GRCBASE_HC              0x108000
#define GRCBASE_ATC             0x110000
#define GRCBASE_PXP2        0x120000
#define GRCBASE_IGU         0x130000
#define GRCBASE_PBF         0x140000
#define GRCBASE_UMAC0       0x160000
#define GRCBASE_UMAC1       0x160400
#define GRCBASE_XPB         0x161000
#define GRCBASE_MSTAT0      0x162000
#define GRCBASE_MSTAT1      0x162800
#define GRCBASE_XMAC0       0x163000
#define GRCBASE_XMAC1       0x163800
#define GRCBASE_TIMERS      0x164000
#define GRCBASE_XSDM        0x166000
#define GRCBASE_QM              0x168000
#define GRCBASE_QM_4PORT    0x168000
#define GRCBASE_DQ              0x170000
#define GRCBASE_TSEM        0x180000
#define GRCBASE_CSEM        0x200000
#define GRCBASE_XSEM        0x280000
#define GRCBASE_XSEM_4PORT  0x280000
#define GRCBASE_USEM        0x300000
#define GRCBASE_MCP_A       0x380000
#define GRCBASE_MISC_AEU    GRCBASE_MISC
#define GRCBASE_Tstorm      GRCBASE_TSEM
#define GRCBASE_Cstorm      GRCBASE_CSEM
#define GRCBASE_Xstorm      GRCBASE_XSEM
#define GRCBASE_Ustorm      GRCBASE_USEM


/* offset of configuration space in the pci core register */
#define PCICFG_OFFSET                                   0x2000
#define PCICFG_VENDOR_ID_OFFSET                         0x00
#define PCICFG_DEVICE_ID_OFFSET                         0x02
#define PCICFG_COMMAND_OFFSET                           0x04
#define PCICFG_COMMAND_IO_SPACE                 (1<<0)
#define PCICFG_COMMAND_MEM_SPACE                (1<<1)
#define PCICFG_COMMAND_BUS_MASTER               (1<<2)
#define PCICFG_COMMAND_SPECIAL_CYCLES           (1<<3)
#define PCICFG_COMMAND_MWI_CYCLES               (1<<4)
#define PCICFG_COMMAND_VGA_SNOOP                (1<<5)
#define PCICFG_COMMAND_PERR_ENA                 (1<<6)
#define PCICFG_COMMAND_STEPPING                 (1<<7)
#define PCICFG_COMMAND_SERR_ENA                 (1<<8)
#define PCICFG_COMMAND_FAST_B2B                 (1<<9)
#define PCICFG_COMMAND_INT_DISABLE              (1<<10)
#define PCICFG_COMMAND_RESERVED                 (0x1f<<11)
#define PCICFG_STATUS_OFFSET                            0x06
#define PCICFG_REVISION_ID_OFFSET                       0x08
#define PCICFG_REVESION_ID_MASK                 0xff
#define PCICFG_REVESION_ID_ERROR_VAL            0xff
#define PCICFG_CACHE_LINE_SIZE                          0x0c
#define PCICFG_LATENCY_TIMER                            0x0d
#define PCICFG_HEADER_TYPE                              0x0e
#define PCICFG_HEADER_TYPE_NORMAL          0
#define PCICFG_HEADER_TYPE_BRIDGE          1
#define PCICFG_HEADER_TYPE_CARDBUS         2
#define PCICFG_BAR_1_LOW                                0x10
#define PCICFG_BAR_1_HIGH                               0x14
#define PCICFG_BAR_2_LOW                                0x18
#define PCICFG_BAR_2_HIGH                               0x1c
#define PCICFG_BAR_3_LOW                                0x20
#define PCICFG_BAR_3_HIGH                               0x24
#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET               0x2c
#define PCICFG_SUBSYSTEM_ID_OFFSET                      0x2e
#define PCICFG_INT_LINE                                 0x3c
#define PCICFG_INT_PIN                                  0x3d
#define PCICFG_PM_CAPABILITY                            0x48
#define PCICFG_PM_CAPABILITY_VERSION            (0x3<<16)
#define PCICFG_PM_CAPABILITY_CLOCK              (1<<19)
#define PCICFG_PM_CAPABILITY_RESERVED           (1<<20)
#define PCICFG_PM_CAPABILITY_DSI                (1<<21)
#define PCICFG_PM_CAPABILITY_AUX_CURRENT        (0x7<<22)
#define PCICFG_PM_CAPABILITY_D1_SUPPORT         (1<<25)
#define PCICFG_PM_CAPABILITY_D2_SUPPORT         (1<<26)
#define PCICFG_PM_CAPABILITY_PME_IN_D0          (1<<27)
#define PCICFG_PM_CAPABILITY_PME_IN_D1          (1<<28)
#define PCICFG_PM_CAPABILITY_PME_IN_D2          (1<<29)
#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT      (1<<30)
#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD     (1<<31)
#define PCICFG_PM_CSR_OFFSET                            0x4c
#define PCICFG_PM_CSR_STATE                     (0x3<<0)
#define PCICFG_PM_CSR_PME_ENABLE                (1<<8)
#define PCICFG_PM_CSR_PME_STATUS                (1<<15)
#define PCICFG_VPD_FLAG_ADDR_OFFSET                     0x50
#define PCICFG_VPD_DATA_OFFSET                          0x54
#define PCICFG_MSI_CAP_ID_OFFSET                        0x58
#define PCICFG_MSI_CONTROL_ENABLE               (0x1<<16)
#define PCICFG_MSI_CONTROL_MCAP                 (0x7<<17)
#define PCICFG_MSI_CONTROL_MENA                 (0x7<<20)
#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP      (0x1<<23)
#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE   (0x1<<24)
#define PCICFG_MSI_ADDR_LOW_OFFSET                      0x5c
#define PCICFG_MSI_ADDR_HIGH_OFFSET                     0x60
#define PCICFG_MSI_DATA_OFFSET                          0x64
#define PCICFG_GRC_ADDRESS                              0x78
#define PCICFG_GRC_DATA                                 0x80
#define PCICFG_ME_REGISTER                  0x98
#define PCICFG_MSIX_CAP_ID_OFFSET                       0xa0
#define PCICFG_MSIX_CONTROL_TABLE_SIZE          (0x7ff<<16)
#define PCICFG_MSIX_CONTROL_RESERVED            (0x7<<27)
#define PCICFG_MSIX_CONTROL_FUNC_MASK           (0x1<<30)
#define PCICFG_MSIX_CONTROL_MSIX_ENABLE         (0x1<<31)

#define PCICFG_DEVICE_CONTROL                           0xb4
#define PCICFG_DEVICE_CONTROL_NP_TRANSACTION_PEND   (1<<21)
#define PCICFG_DEVICE_STATUS                            0xb6
#define PCICFG_DEVICE_STATUS_CORR_ERR_DET       (1<<0)
#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET  (1<<1)
#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET      (1<<2)
#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET      (1<<3)
#define PCICFG_DEVICE_STATUS_AUX_PWR_DET        (1<<4)
#define PCICFG_DEVICE_STATUS_NO_PEND            (1<<5)
#define PCICFG_LINK_CONTROL                             0xbc


/* config_2 offset */
#define GRC_CONFIG_2_SIZE_REG                           0x408
#define PCI_CONFIG_2_BAR1_SIZE                  (0xfL<<0)
#define PCI_CONFIG_2_BAR1_SIZE_DISABLED         (0L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_64K              (1L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_128K             (2L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_256K             (3L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_512K             (4L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_1M               (5L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_2M               (6L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_4M               (7L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_8M               (8L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_16M              (9L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_32M              (10L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_64M              (11L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_128M             (12L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_256M             (13L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_512M             (14L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_1G               (15L<<0)
#define PCI_CONFIG_2_BAR1_64ENA                 (1L<<4)
#define PCI_CONFIG_2_EXP_ROM_RETRY              (1L<<5)
#define PCI_CONFIG_2_CFG_CYCLE_RETRY            (1L<<6)
#define PCI_CONFIG_2_FIRST_CFG_DONE             (1L<<7)
#define PCI_CONFIG_2_EXP_ROM_SIZE               (0xffL<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED      (0L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_2K            (1L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_4K            (2L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_8K            (3L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_16K           (4L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_32K           (5L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_64K           (6L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_128K          (7L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_256K          (8L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_512K          (9L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_1M            (10L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_2M            (11L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_4M            (12L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_8M            (13L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_16M           (14L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_32M           (15L<<8)
#define PCI_CONFIG_2_BAR_PREFETCH               (1L<<16)
#define PCI_CONFIG_2_RESERVED0                  (0x7fffL<<17)

/* config_3 offset */
#define GRC_CONFIG_3_SIZE_REG                           0x40c
#define PCI_CONFIG_3_STICKY_BYTE                        (0xffL<<0)
#define PCI_CONFIG_3_FORCE_PME                  (1L<<24)
#define PCI_CONFIG_3_PME_STATUS                 (1L<<25)
#define PCI_CONFIG_3_PME_ENABLE                 (1L<<26)
#define PCI_CONFIG_3_PM_STATE                   (0x3L<<27)
#define PCI_CONFIG_3_VAUX_PRESET                        (1L<<30)
#define PCI_CONFIG_3_PCI_POWER                  (1L<<31)

#define GRC_REG_DEVICE_CONTROL              0x4d8
#define PCIE_SRIOV_DISABLE_IN_PROGRESS \
        (1 << 29) /*When VF Enable is cleared(after it was previously set),
 this register will read a value of 1, indicating that all the
 VFs that belong to this PF should be flushed.
 Software should clear this bit within 1 second of VF Enable
 being set by writing a 1 to it, so that VFs are visible to the system again.
                                                        WC */
#define PCIE_FLR_IN_PROGRESS \
        (1 << 27) /*When FLR is initiated, this register will read a \
        value of 1 indicating that the
 Function is in FLR state. Func can be brought out of FLR state either by
 writing 1 to this register (at least 50 ms after FLR was initiated),
 or it can also be cleared automatically after 55 ms if auto_clear bit
 in private reg space is set. This bit also exists in VF register space
                                                        WC */

#define GRC_BAR2_CONFIG                                 0x4e0
#define PCI_CONFIG_2_BAR2_SIZE                  (0xfL<<0)
#define PCI_CONFIG_2_BAR2_SIZE_DISABLED         (0L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_64K              (1L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_128K             (2L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_256K             (3L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_512K             (4L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_1M               (5L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_2M               (6L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_4M               (7L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_8M               (8L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_16M              (9L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_32M              (10L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_64M              (11L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_128M             (12L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_256M             (13L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_512M             (14L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_1G               (15L<<0)
#define PCI_CONFIG_2_BAR2_64ENA                 (1L<<4)

#define GRC_BAR3_CONFIG                                 0x4f4
#define PCI_CONFIG_2_BAR3_SIZE                  (0xfL<<0)
#define PCI_CONFIG_2_BAR3_SIZE_DISABLED         (0L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_64K              (1L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_128K             (2L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_256K             (3L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_512K             (4L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_1M               (5L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_2M               (6L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_4M               (7L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_8M               (8L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_16M              (9L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_32M              (10L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_64M              (11L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_128M             (12L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_256M             (13L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_512M             (14L<<0)
#define PCI_CONFIG_2_BAR3_SIZE_1G               (15L<<0)
#define PCI_CONFIG_2_BAR3_64ENA                 (1L<<4)

#define PCI_PM_DATA_A                                   0x410
#define PCI_PM_DATA_B                                   0x414
#define PCI_ID_VAL1                                     0x434
#define PCI_ID_VAL2                                     0x438
#define PCI_ID_VAL3                                     0x43c
#define PCI_ID_VAL3_REVISION_ID_ERROR             (0xffL<<24)


#define GRC_CONFIG_REG_VF_BAR_REG_1             0x608
#define GRC_CONFIG_REG_VF_BAR_REG_BAR0_SIZE     0xf

#define GRC_CONFIG_REG_VF_MSIX_CONTROL              0x61C
#define GRC_CR_VF_MSIX_CTRL_VF_MSIX_TBL_SIZE_MASK \
        0x3F  /*This field resides in VF only and does not exist in PF.
 This register controls the read value of the MSIX_CONTROL[10:0] register
 in the VF configuration space. A value of "00000000011" indicates
 a table size of 4. The value is controlled by IOV_MSIX_TBL_SIZ
 define in version.v */

#define GRC_CONFIG_REG_PF_INIT_VF               0x624
#define GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK \
        0xf /*First VF_NUM for PF is encoded in this register.
 The number of VFs assigned to a PF is assumed to be a multiple of 8.
        Software should program these bits based on Total Number of VFs \
        programmed for each PF.
 Since registers from 0x000-0x7ff are spilt across functions, each PF will have
 the same location for the same 4 bits*/

#define PXPCS_TL_CONTROL_5                      0x814
#define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN    (1 << 29) /*WC*/
#define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN     (1 << 28)   /*WC*/
#define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN   (1 << 27)   /*WC*/
#define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN    (1 << 26)   /*WC*/
#define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR  (1 << 25)   /*WC*/
#define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW     (1 << 24)   /*WC*/
#define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN    (1 << 23)   /*RO*/
#define PXPCS_TL_CONTROL_5_DL_ERR_ATTN     (1 << 22)   /*RO*/
#define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE   (1 << 21)   /*WC*/
#define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG  (1 << 20)   /*WC*/
#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1   (1 << 19)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1   (1 << 18)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_ECRC1   (1 << 17)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1   (1 << 16)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1   (1 << 15)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1  (1 << 14)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1    (1 << 13)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1    (1 << 12)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1    (1 << 11)   /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1   (1 << 10)   /*WC*/
#define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT    (1 << 9)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_UNSPPORT    (1 << 8)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_ECRC    (1 << 7)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_MALF_TLP    (1 << 6)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW    (1 << 5)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL   (1 << 4)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT     (1 << 3)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT     (1 << 2)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_FC_PRTL     (1 << 1)    /*WC*/
#define PXPCS_TL_CONTROL_5_ERR_PSND_TLP    (1 << 0)    /*WC*/


#define PXPCS_TL_FUNC345_STAT      0x854
#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4    (1 << 29)   /* WC */
#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 \
        (1 << 28) /* Unsupported Request Error Status in function4, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_ECRC4 \
        (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4 \
        (1 << 26) /* Malformed TLP Status Status in function 4, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4 \
        (1 << 25) /* Receiver Overflow Status Status in function 4, if \
        set, generate pcie_err_attn output when this error is seen.. WC \
        */
#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4 \
        (1 << 24) /* Unexpected Completion Status Status in function 4, \
        if set, generate pcie_err_attn output when this error is seen. WC \
        */
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4 \
        (1 << 23) /* Receive UR Statusin function 4. If set, generate \
        pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4 \
        (1 << 22) /* Completer Timeout Status Status in function 4, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4 \
        (1 << 21) /* Flow Control Protocol Error Status Status in \
        function 4, if set, generate pcie_err_attn output when this error \
        is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4 \
        (1 << 20) /* Poisoned Error Status Status in function 4, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3    (1 << 19)   /* WC */
#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 \
        (1 << 18) /* Unsupported Request Error Status in function3, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_ECRC3 \
        (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3 \
        (1 << 16) /* Malformed TLP Status Status in function 3, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3 \
        (1 << 15) /* Receiver Overflow Status Status in function 3, if \
        set, generate pcie_err_attn output when this error is seen.. WC \
        */
#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3 \
        (1 << 14) /* Unexpected Completion Status Status in function 3, \
        if set, generate pcie_err_attn output when this error is seen. WC \
        */
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3 \
        (1 << 13) /* Receive UR Statusin function 3. If set, generate \
        pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3 \
        (1 << 12) /* Completer Timeout Status Status in function 3, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3 \
        (1 << 11) /* Flow Control Protocol Error Status Status in \
        function 3, if set, generate pcie_err_attn output when this error \
        is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3 \
        (1 << 10) /* Poisoned Error Status Status in function 3, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2    (1 << 9)    /* WC */
#define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2 \
        (1 << 8) /* Unsupported Request Error Status for Function 2, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_ECRC2 \
        (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2 \
        (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2 \
        (1 << 5) /* Receiver Overflow Status Status for Function 2, if \
        set, generate pcie_err_attn output when this error is seen.. WC \
        */
#define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2 \
        (1 << 4) /* Unexpected Completion Status Status for Function 2, \
        if set, generate pcie_err_attn output when this error is seen. WC \
        */
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2 \
        (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \
        pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2 \
        (1 << 2) /* Completer Timeout Status Status for Function 2, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2 \
        (1 << 1) /* Flow Control Protocol Error Status Status for \
        Function 2, if set, generate pcie_err_attn output when this error \
        is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2 \
        (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \
        generate pcie_err_attn output when this error is seen.. WC */


#define PXPCS_TL_FUNC678_STAT  0x85C
#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7    (1 << 29)   /*    WC */
#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 \
        (1 << 28) /* Unsupported Request Error Status in function7, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_ECRC7 \
        (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7 \
        (1 << 26) /* Malformed TLP Status Status in function 7, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7 \
        (1 << 25) /* Receiver Overflow Status Status in function 7, if \
        set, generate pcie_err_attn output when this error is seen.. WC \
        */
#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7 \
        (1 << 24) /* Unexpected Completion Status Status in function 7, \
        if set, generate pcie_err_attn output when this error is seen. WC \
        */
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7 \
        (1 << 23) /* Receive UR Statusin function 7. If set, generate \
        pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7 \
        (1 << 22) /* Completer Timeout Status Status in function 7, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7 \
        (1 << 21) /* Flow Control Protocol Error Status Status in \
        function 7, if set, generate pcie_err_attn output when this error \
        is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7 \
        (1 << 20) /* Poisoned Error Status Status in function 7, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6    (1 << 19)    /*    WC */
#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 \
        (1 << 18) /* Unsupported Request Error Status in function6, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_ECRC6 \
        (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6 \
        (1 << 16) /* Malformed TLP Status Status in function 6, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6 \
        (1 << 15) /* Receiver Overflow Status Status in function 6, if \
        set, generate pcie_err_attn output when this error is seen.. WC \
        */
#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6 \
        (1 << 14) /* Unexpected Completion Status Status in function 6, \
        if set, generate pcie_err_attn output when this error is seen. WC \
        */
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6 \
        (1 << 13) /* Receive UR Statusin function 6. If set, generate \
        pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6 \
        (1 << 12) /* Completer Timeout Status Status in function 6, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6 \
        (1 << 11) /* Flow Control Protocol Error Status Status in \
        function 6, if set, generate pcie_err_attn output when this error \
        is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6 \
        (1 << 10) /* Poisoned Error Status Status in function 6, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5    (1 << 9) /*    WC */
#define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5 \
        (1 << 8) /* Unsupported Request Error Status for Function 5, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_ECRC5 \
        (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5 \
        (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \
        generate pcie_err_attn output when this error is seen.. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5 \
        (1 << 5) /* Receiver Overflow Status Status for Function 5, if \
        set, generate pcie_err_attn output when this error is seen.. WC \
        */
#define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5 \
        (1 << 4) /* Unexpected Completion Status Status for Function 5, \
        if set, generate pcie_err_attn output when this error is seen. WC \
        */
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5 \
        (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \
        pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5 \
        (1 << 2) /* Completer Timeout Status Status for Function 5, if \
        set, generate pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5 \
        (1 << 1) /* Flow Control Protocol Error Status Status for \
        Function 5, if set, generate pcie_err_attn output when this error \
        is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5 \
        (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \
        generate pcie_err_attn output when this error is seen.. WC */


#define BAR_USTRORM_INTMEM                              0x400000
#define BAR_CSTRORM_INTMEM                              0x410000
#define BAR_XSTRORM_INTMEM                              0x420000
#define BAR_TSTRORM_INTMEM                              0x430000

/* for accessing the IGU in case of status block ACK */
#define BAR_IGU_INTMEM                                  0x440000

#define BAR_DOORBELL_OFFSET                             0x800000

#define BAR_ME_REGISTER                                 0x450000
#define ME_REG_PF_NUM_SHIFT             0
#define ME_REG_PF_NUM \
        (7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */
#define ME_REG_VF_VALID                 (1<<8)
#define ME_REG_VF_NUM_SHIFT             9
#define ME_REG_VF_NUM_MASK              (0x3f<<ME_REG_VF_NUM_SHIFT)
#define VF_ID(x)                        0 /* TODO: remove def */
#define ME_REG_VF_ERR                   (0x1<<3)
#define ME_REG_ABS_PF_NUM_SHIFT         16
#define ME_REG_ABS_PF_NUM \
        (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */


#define PXP_VF_ADRR_NUM_QUEUES          136
#define PXP_ADDR_QUEUE_SIZE                     32
#define PXP_ADDR_REG_SIZE                       512


#define PXP_VF_ADDR_IGU_START           0
#define PXP_VF_ADDR_IGU_SIZE            (0x3000)
#define PXP_VF_ADDR_IGU_END \
        ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1)

#define PXP_VF_ADDR_USDM_QUEUES_START           0x3000
#define PXP_VF_ADDR_USDM_QUEUES_SIZE \
        (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE)
#define PXP_VF_ADDR_USDM_QUEUES_END \
        ((PXP_VF_ADDR_USDM_QUEUES_START) + (PXP_VF_ADDR_USDM_QUEUES_SIZE) - 1)

#define PXP_VF_ADDR_CSDM_QUEUES_START           0x4100
#define PXP_VF_ADDR_CSDM_QUEUES_SIZE \
        (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE)
#define PXP_VF_ADDR_CSDM_QUEUES_END \
        ((PXP_VF_ADDR_CSDM_QUEUES_START) + (PXP_VF_ADDR_CSDM_QUEUES_SIZE) - 1)

#define PXP_VF_ADDR_XSDM_QUEUES_START           0x5200
#define PXP_VF_ADDR_XSDM_QUEUES_SIZE \
        (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE)
#define PXP_VF_ADDR_XSDM_QUEUES_END \
        ((PXP_VF_ADDR_XSDM_QUEUES_START) + (PXP_VF_ADDR_XSDM_QUEUES_SIZE) - 1)

#define PXP_VF_ADDR_TSDM_QUEUES_START           0x6300
#define PXP_VF_ADDR_TSDM_QUEUES_SIZE \
        (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE)
#define PXP_VF_ADDR_TSDM_QUEUES_END \
        ((PXP_VF_ADDR_TSDM_QUEUES_START) + (PXP_VF_ADDR_TSDM_QUEUES_SIZE) - 1)

#define PXP_VF_ADDR_USDM_GLOBAL_START           0x7400
#define PXP_VF_ADDR_USDM_GLOBAL_SIZE            (PXP_ADDR_REG_SIZE)
#define PXP_VF_ADDR_USDM_GLOBAL_END \
        ((PXP_VF_ADDR_USDM_GLOBAL_START) + (PXP_VF_ADDR_USDM_GLOBAL_SIZE) - 1)

#define PXP_VF_ADDR_CSDM_GLOBAL_START           0x7600
#define PXP_VF_ADDR_CSDM_GLOBAL_SIZE            (PXP_ADDR_REG_SIZE)
#define PXP_VF_ADDR_CSDM_GLOBAL_END \
        ((PXP_VF_ADDR_CSDM_GLOBAL_START) + (PXP_VF_ADDR_CSDM_GLOBAL_SIZE) - 1)

#define PXP_VF_ADDR_XSDM_GLOBAL_START           0x7800
#define PXP_VF_ADDR_XSDM_GLOBAL_SIZE            (PXP_ADDR_REG_SIZE)
#define PXP_VF_ADDR_XSDM_GLOBAL_END \
        ((PXP_VF_ADDR_XSDM_GLOBAL_START) + (PXP_VF_ADDR_XSDM_GLOBAL_SIZE) - 1)

#define PXP_VF_ADDR_TSDM_GLOBAL_START           0x7a00
#define PXP_VF_ADDR_TSDM_GLOBAL_SIZE            (PXP_ADDR_REG_SIZE)
#define PXP_VF_ADDR_TSDM_GLOBAL_END \
        ((PXP_VF_ADDR_TSDM_GLOBAL_START) + (PXP_VF_ADDR_TSDM_GLOBAL_SIZE) - 1)

#define PXP_VF_ADDR_DB_START                            0x7c00
#define PXP_VF_ADDR_DB_SIZE                                     (0x200)
#define PXP_VF_ADDR_DB_END \
        ((PXP_VF_ADDR_DB_START) + (PXP_VF_ADDR_DB_SIZE) - 1)

#define PXP_VF_ADDR_GRC_START                           0x7e00
#define PXP_VF_ADDR_GRC_SIZE                            (0x200)
#define PXP_VF_ADDR_GRC_END \
        ((PXP_VF_ADDR_GRC_START) + (PXP_VF_ADDR_GRC_SIZE) - 1)

#define PXP_VF_ADDR_DORQ_START                          (0x0)
#define PXP_VF_ADDR_DORQ_SIZE                           (0xffffffff)
#define PXP_VF_ADDR_DORQ_END                            (0xffffffff)

#define PXP_BAR_GRC             0
#define PXP_BAR_TSDM    0
#define PXP_BAR_USDM    0
#define PXP_BAR_XSDM    0
#define PXP_BAR_CSDM    0
#define PXP_BAR_IGU             0
#define PXP_BAR_DQ              1

#define PXP_VF_BAR_IGU  0
#define PXP_VF_BAR_USDM_QUEUES  0
#define PXP_VF_BAR_TSDM_QUEUES  0
#define PXP_VF_BAR_XSDM_QUEUES  0
#define PXP_VF_BAR_CSDM_QUEUES  0
#define PXP_VF_BAR_USDM_GLOBAL  0
#define PXP_VF_BAR_TSDM_GLOBAL  0
#define PXP_VF_BAR_XSDM_GLOBAL  0
#define PXP_VF_BAR_CSDM_GLOBAL  0
#define PXP_VF_BAR_DB   0
#define PXP_VF_BAR_GRC  0
#define PXP_VF_BAR_DORQ 1

/* PCI CAPABILITIES*/

#define PCI_CAP_PCIE                            0x10    /*PCIe capability ID*/

#define PCIE_DEV_CAPS                           0x04

#define PCIE_DEV_CTRL                           0x08
#define PCIE_DEV_CTRL_FLR                               0x8000;

#define PCIE_DEV_STATUS                         0x0A

#define PCI_CAP_MSIX                            0x11    /*MSI-X capability ID*/
#define PCI_MSIX_CONTROL_SHIFT                  16
#define PCI_MSIX_TABLE_SIZE_MASK                0x07FF
#define PCI_MSIX_TABLE_ENABLE_MASK              0x8000


#if (defined(__LINUX)) || (defined(PCI_CAP_LIST_ID))
#define PCI_CAP_LIST_ID_DEF
#endif
#if (defined(__LINUX)) || (defined(PCI_CAP_LIST_NEXT))
#define PCI_CAP_LIST_NEXT_DEF
#endif
#if (defined(__LINUX)) || (defined(PCI_STATUS))
#define PCI_STATUS_DEF
#endif
#if (defined(__LINUX)) || (defined(PCI_STATUS_CAP_LIST))
#define PCI_STATUS_CAP_LIST_DEF
#endif


#define MDIO_REG_BANK_CL73_IEEEB0                       0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL                0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN     0x0200
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN          0x1000
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST       0x8000

#define MDIO_REG_BANK_CL73_IEEEB1                       0x10
#define MDIO_CL73_IEEEB1_AN_ADV1                        0x00
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE                  0x0400
#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC             0x0800
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH             0x0C00
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK             0x0C00
#define MDIO_CL73_IEEEB1_AN_ADV2                                0x01
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M             0x0000
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX          0x0020
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4           0x0040
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR            0x0080
#define MDIO_CL73_IEEEB1_AN_LP_ADV1                     0x03
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE               0x0400
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC          0x0800
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH          0x0C00
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK          0x0C00
#define MDIO_CL73_IEEEB1_AN_LP_ADV2                     0x04

#define MDIO_REG_BANK_RX0                               0x80b0
#define MDIO_RX0_RX_STATUS                              0x10
#define MDIO_RX0_RX_STATUS_SIGDET                       0x8000
#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE                  0x1000
#define MDIO_RX0_RX_EQ_BOOST                            0x1c
#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX1                               0x80c0
#define MDIO_RX1_RX_EQ_BOOST                            0x1c
#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX2                               0x80d0
#define MDIO_RX2_RX_EQ_BOOST                            0x1c
#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX3                               0x80e0
#define MDIO_RX3_RX_EQ_BOOST                            0x1c
#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL                0x10

#define MDIO_REG_BANK_RX_ALL                            0x80f0
#define MDIO_RX_ALL_RX_EQ_BOOST                         0x1c
#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK     0x7
#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL     0x10

#define MDIO_REG_BANK_TX0                               0x8060
#define MDIO_TX0_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_TX1                               0x8070
#define MDIO_TX1_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_TX2                               0x8080
#define MDIO_TX2_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_TX3                               0x8090
#define MDIO_TX3_TX_DRIVER                              0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
#define MDIO_TX0_TX_DRIVER_ICBUF1T                      1

#define MDIO_REG_BANK_XGXS_BLOCK0                       0x8000
#define MDIO_BLOCK0_XGXS_CONTROL                        0x10

#define MDIO_REG_BANK_XGXS_BLOCK1                       0x8010
#define MDIO_BLOCK1_LANE_CTRL0                          0x15
#define MDIO_BLOCK1_LANE_CTRL1                          0x16
#define MDIO_BLOCK1_LANE_CTRL2                          0x17
#define MDIO_BLOCK1_LANE_PRBS                           0x19

#define MDIO_REG_BANK_XGXS_BLOCK2                       0x8100
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP                     0x10
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE              0x8000
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE        0x4000
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP             0x11
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE              0x8000
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G       0x14
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS      0x0001
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS    0x0010
#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE         0x15

#define MDIO_REG_BANK_GP_STATUS                         0x8120
#define MDIO_GP_STATUS_TOP_AN_STATUS1                           0x1B
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE     0x0001
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE     0x0002
#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS               0x0004
#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS             0x0008
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE     0x0010
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE       0x0020
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE    0x0040
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE    0x0080
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK         0x3f00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M          0x0000
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M         0x0100
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G           0x0200
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G         0x0300
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G           0x0400
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G           0x0500
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG      0x0600
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4      0x0700
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG      0x0800
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G        0x0900
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G          0x0A00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G          0x0B00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G          0x0C00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX        0x0D00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4      0x0E00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR       0x0F00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI      0x1B00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS    0x1E00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI      0x1F00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2      0x3900


#define MDIO_REG_BANK_10G_PARALLEL_DETECT               0x8130
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS             0x10
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK             0x8000
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL            0x11
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN       0x1
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK               0x13
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT           (0xb71<<1)

#define MDIO_REG_BANK_SERDES_DIGITAL                    0x8300
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1                    0x10
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE                 0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF                     0x0002
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN           0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT       0x0008
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET                    0x0010
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE                  0x0020
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2                    0x11
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN                  0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR                 0x0040
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1                     0x14
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII                       0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK                        0x0002
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX                      0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK                  0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT                 3
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G                  0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G                    0x0010
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M                  0x0008
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M                   0x0000
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2                     0x15
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED                 0x0002
#define MDIO_SERDES_DIGITAL_MISC1                               0x18
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK                       0xE000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M                        0x0000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M                       0x2000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M                       0x4000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M                    0x6000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M                     0x8000
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL                       0x0010
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK                      0x000f
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G                      0x0000
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G                        0x0001
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G                        0x0002
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG                   0x0003
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4                   0x0004
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G                       0x0005
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G                     0x0006
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G                       0x0007
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G                       0x0008
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G                       0x0009

#define MDIO_REG_BANK_OVER_1G                           0x8320
#define MDIO_OVER_1G_DIGCTL_3_4                                 0x14
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK                              0xffe0
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT                             5
#define MDIO_OVER_1G_UP1                                        0x19
#define MDIO_OVER_1G_UP1_2_5G                                           0x0001
#define MDIO_OVER_1G_UP1_5G                                             0x0002
#define MDIO_OVER_1G_UP1_6G                                             0x0004
#define MDIO_OVER_1G_UP1_10G                                            0x0010
#define MDIO_OVER_1G_UP1_10GH                                           0x0008
#define MDIO_OVER_1G_UP1_12G                                            0x0020
#define MDIO_OVER_1G_UP1_12_5G                                          0x0040
#define MDIO_OVER_1G_UP1_13G                                            0x0080
#define MDIO_OVER_1G_UP1_15G                                            0x0100
#define MDIO_OVER_1G_UP1_16G                                            0x0200
#define MDIO_OVER_1G_UP2                                        0x1A
#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK                                0x0007
#define MDIO_OVER_1G_UP2_IDRIVER_MASK                                   0x0038
#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK                               0x03C0
#define MDIO_OVER_1G_UP3                                        0x1B
#define MDIO_OVER_1G_UP3_HIGIG2                                         0x0001
#define MDIO_OVER_1G_LP_UP1                                     0x1C
#define MDIO_OVER_1G_LP_UP2                                     0x1D
#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK                         0x03ff
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK                            0x0780
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT                           7
#define MDIO_OVER_1G_LP_UP3                                             0x1E

#define MDIO_REG_BANK_REMOTE_PHY                        0x8330
#define MDIO_REMOTE_PHY_MISC_RX_STATUS                          0x10
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG     0x0010
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG   0x0600

#define MDIO_REG_BANK_BAM_NEXT_PAGE                     0x8350
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL                   0x10
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE                  0x0001
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN                  0x0002

#define MDIO_REG_BANK_CL73_USERB0               0x8370
#define MDIO_CL73_USERB0_CL73_UCTRL                             0x10
#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL                       0x0002
#define MDIO_CL73_USERB0_CL73_USTAT1                            0x11
#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK                  0x0100
#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37                0x0400
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1                         0x12
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN                          0x8000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN             0x4000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN              0x2000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3                         0x14
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR                 0x0001

#define MDIO_REG_BANK_AER_BLOCK                 0xFFD0
#define MDIO_AER_BLOCK_AER_REG                                  0x1E

#define MDIO_REG_BANK_COMBO_IEEE0               0xFFE0
#define MDIO_COMBO_IEEE0_MII_CONTROL                            0x10
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK                   0x2040
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10                     0x0000
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100                    0x2000
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000                   0x0040
#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX                         0x0100
#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN                          0x0200
#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN                               0x1000
#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK                            0x4000
#define MDIO_COMBO_IEEO_MII_CONTROL_RESET                               0x8000
#define MDIO_COMBO_IEEE0_MII_STATUS                             0x11
#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS                           0x0004
#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE                    0x0020
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV                           0x14
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX                       0x0020
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX                       0x0040
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK                        0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE                        0x0000
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC                   0x0080
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC                  0x0100
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH                        0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE                         0x8000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1         0x15
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE       0x8000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK             0x4000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK      0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE      0x0000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH      0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP    0x0040
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP    0x0020
/*WhenthelinkpartnerisinSGMIImode(bit0=1), then
bit15=link, bit12=duplex, bits11:10=speed, bit14=acknowledge.
Theotherbitsarereservedandshouldbezero*/
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE      0x0001


#define MDIO_PMA_DEVAD                  0x1
/*ieee*/
#define MDIO_PMA_REG_CTRL               0x0
#define MDIO_PMA_REG_STATUS             0x1
#define MDIO_PMA_REG_10G_CTRL2          0x7
#define MDIO_PMA_REG_TX_DISABLE         0x0009
#define MDIO_PMA_REG_RX_SD              0xa
/*bnx2x*/
#define MDIO_PMA_REG_BNX2X_CTRL         0x0096
#define MDIO_PMA_REG_FEC_CTRL           0x00ab
#define MDIO_PMA_LASI_RXCTRL            0x9000
#define MDIO_PMA_LASI_TXCTRL            0x9001
#define MDIO_PMA_LASI_CTRL              0x9002
#define MDIO_PMA_LASI_RXSTAT            0x9003
#define MDIO_PMA_LASI_TXSTAT            0x9004
#define MDIO_PMA_LASI_STAT              0x9005
#define MDIO_PMA_REG_PHY_IDENTIFIER     0xc800
#define MDIO_PMA_REG_DIGITAL_CTRL       0xc808
#define MDIO_PMA_REG_DIGITAL_STATUS     0xc809
#define MDIO_PMA_REG_TX_POWER_DOWN      0xca02
#define MDIO_PMA_REG_CMU_PLL_BYPASS     0xca09
#define MDIO_PMA_REG_MISC_CTRL          0xca0a
#define MDIO_PMA_REG_GEN_CTRL           0xca10
#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP     0x0188
#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET           0x018a
#define MDIO_PMA_REG_M8051_MSGIN_REG    0xca12
#define MDIO_PMA_REG_M8051_MSGOUT_REG   0xca13
#define MDIO_PMA_REG_ROM_VER1           0xca19
#define MDIO_PMA_REG_ROM_VER2           0xca1a
#define MDIO_PMA_REG_EDC_FFE_MAIN       0xca1b
#define MDIO_PMA_REG_PLL_BANDWIDTH      0xca1d
#define MDIO_PMA_REG_PLL_CTRL           0xca1e
#define MDIO_PMA_REG_MISC_CTRL0         0xca23
#define MDIO_PMA_REG_LRM_MODE           0xca3f
#define MDIO_PMA_REG_CDR_BANDWIDTH      0xca46
#define MDIO_PMA_REG_MISC_CTRL1         0xca85

#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL          0x8000
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK      0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE           0x0000
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE       0x0004
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS    0x0008
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED         0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT      0x8002
#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR      0x8003
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF     0xc820
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8726_TX_CTRL1              0xca01
#define MDIO_PMA_REG_8726_TX_CTRL2              0xca05

#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR   0x8005
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF     0x8007
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8727_MISC_CTRL             0x8309
#define MDIO_PMA_REG_8727_TX_CTRL1              0xca02
#define MDIO_PMA_REG_8727_TX_CTRL2              0xca05
#define MDIO_PMA_REG_8727_PCS_OPT_CTRL          0xc808
#define MDIO_PMA_REG_8727_GPIO_CTRL             0xc80e
#define MDIO_PMA_REG_8727_PCS_GP                0xc842
#define MDIO_PMA_REG_8727_OPT_CFG_REG           0xc8e4

#define MDIO_AN_REG_8727_MISC_CTRL              0x8309
#define MDIO_PMA_REG_8073_CHIP_REV                      0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS             0xc820
#define MDIO_PMA_REG_8073_XAUI_WA                       0xc841
#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL              0xcd08

#define MDIO_PMA_REG_7101_RESET         0xc000
#define MDIO_PMA_REG_7107_LED_CNTL      0xc007
#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009
#define MDIO_PMA_REG_7101_VER1          0xc026
#define MDIO_PMA_REG_7101_VER2          0xc027

#define MDIO_PMA_REG_8481_PMD_SIGNAL    0xa811
#define MDIO_PMA_REG_8481_LED1_MASK     0xa82c
#define MDIO_PMA_REG_8481_LED2_MASK     0xa82f
#define MDIO_PMA_REG_8481_LED3_MASK     0xa832
#define MDIO_PMA_REG_8481_LED3_BLINK    0xa834
#define MDIO_PMA_REG_8481_LED5_MASK                     0xa838
#define MDIO_PMA_REG_8481_SIGNAL_MASK   0xa835
#define MDIO_PMA_REG_8481_LINK_SIGNAL   0xa83b
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK  0x800
#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11


#define MDIO_WIS_DEVAD                  0x2
/*bnx2x*/
#define MDIO_WIS_REG_LASI_CNTL          0x9002
#define MDIO_WIS_REG_LASI_STATUS        0x9005

#define MDIO_PCS_DEVAD                  0x3
#define MDIO_PCS_REG_STATUS             0x0020
#define MDIO_PCS_REG_LASI_STATUS        0x9005
#define MDIO_PCS_REG_7101_DSP_ACCESS    0xD000
#define MDIO_PCS_REG_7101_SPI_MUX       0xD008
#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD   (0xC7)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028


#define MDIO_XS_DEVAD                   0x4
#define MDIO_XS_REG_STATUS              0x0001
#define MDIO_XS_PLL_SEQUENCER           0x8000
#define MDIO_XS_SFX7101_XGXS_TEST1      0xc00a

#define MDIO_XS_8706_REG_BANK_RX0       0x80bc
#define MDIO_XS_8706_REG_BANK_RX1       0x80cc
#define MDIO_XS_8706_REG_BANK_RX2       0x80dc
#define MDIO_XS_8706_REG_BANK_RX3       0x80ec
#define MDIO_XS_8706_REG_BANK_RXA       0x80fc

#define MDIO_XS_REG_8073_RX_CTRL_PCIE   0x80FA

#define MDIO_AN_DEVAD                   0x7
/*ieee*/
#define MDIO_AN_REG_CTRL                0x0000
#define MDIO_AN_REG_STATUS              0x0001
#define MDIO_AN_REG_STATUS_AN_COMPLETE          0x0020
#define MDIO_AN_REG_ADV_PAUSE           0x0010
#define MDIO_AN_REG_ADV_PAUSE_PAUSE             0x0400
#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC        0x0800
#define MDIO_AN_REG_ADV_PAUSE_BOTH              0x0C00
#define MDIO_AN_REG_ADV_PAUSE_MASK              0x0C00
#define MDIO_AN_REG_ADV                 0x0011
#define MDIO_AN_REG_ADV2                0x0012
#define MDIO_AN_REG_LP_AUTO_NEG         0x0013
#define MDIO_AN_REG_LP_AUTO_NEG2        0x0014
#define MDIO_AN_REG_MASTER_STATUS       0x0021
#define MDIO_AN_REG_EEE_ADV             0x003c
#define MDIO_AN_REG_LP_EEE_ADV          0x003d
/*bnx2x*/
#define MDIO_AN_REG_LINK_STATUS         0x8304
#define MDIO_AN_REG_CL37_CL73           0x8370
#define MDIO_AN_REG_CL37_AN             0xffe0
#define MDIO_AN_REG_CL37_FC_LD          0xffe4
#define         MDIO_AN_REG_CL37_FC_LP          0xffe5
#define         MDIO_AN_REG_1000T_STATUS        0xffea

#define MDIO_AN_REG_8073_2_5G           0x8329
#define MDIO_AN_REG_8073_BAM            0x8350

#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL      0x0020
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL        0xffe0
#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G      0x40
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS      0xffe1
#define MDIO_AN_REG_848xx_ID_MSB                0xffe2
#define BNX2X84858_PHY_ID                                       0x600d
#define MDIO_AN_REG_848xx_ID_LSB                0xffe3
#define MDIO_AN_REG_8481_LEGACY_AN_ADV          0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION    0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL             0xffe9
#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL       0xfff0
#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF        0x0008
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW    0xfff5
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS   0xfff7
#define MDIO_AN_REG_8481_AUX_CTRL               0xfff8
#define MDIO_AN_REG_8481_INTERRUPT_MASK         0xfffb
#define MDIO_AN_REG_8481_LEGACY_SHADOW          0xfffc

/* BNX2X84823 only */
#define MDIO_CTL_DEVAD                  0x1e
#define MDIO_CTL_REG_84823_MEDIA                0x401a
#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK               0x0018
        /* These pins configure the BNX2X84823 interface to MAC after reset. */
#define MDIO_CTL_REG_84823_CTRL_MAC_XFI                 0x0008
#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M             0x0010
        /* These pins configure the BNX2X84823 interface to Line after reset. */
#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK              0x0060
#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L            0x0020
#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI               0x0040
        /* When this pin is active high during reset, 10GBASE-T core is power
         * down, When it is active low the 10GBASE-T is power up
         */
#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN       0x0080
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK          0x0100
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER        0x0000
#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER         0x0100
#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G                       0x1000
#define MDIO_CTL_REG_84823_USER_CTRL_REG                        0x4005
#define MDIO_CTL_REG_84823_USER_CTRL_CMS                        0x0080
#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH                0xa82b
#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ        0x2f
#define MDIO_PMA_REG_84823_CTL_LED_CTL_1                        0xa8e3
#define MDIO_PMA_REG_84833_CTL_LED_CTL_1                        0xa8ec
#define MDIO_PMA_REG_84823_LED3_STRETCH_EN                      0x0080
/* BNX2X84858 only */
#define MDIO_PMA_REG_84858_ALLOW_GPHY_ACT                       0x8000

/* BNX2X84833 only */
#define MDIO_84833_TOP_CFG_FW_REV                       0x400f
#define MDIO_84833_TOP_CFG_FW_EEE               0x10b1
#define MDIO_84833_TOP_CFG_FW_NO_EEE            0x1f81
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1                 0x401a
#define MDIO_84833_SUPER_ISOLATE                0x8000
/* These are mailbox register set used by 84833/84858. */
#define MDIO_848xx_TOP_CFG_SCRATCH_REG0                 0x4005
#define MDIO_848xx_TOP_CFG_SCRATCH_REG1                 0x4006
#define MDIO_848xx_TOP_CFG_SCRATCH_REG2                 0x4007
#define MDIO_848xx_TOP_CFG_SCRATCH_REG3                 0x4008
#define MDIO_848xx_TOP_CFG_SCRATCH_REG4                 0x4009
#define MDIO_848xx_TOP_CFG_SCRATCH_REG26                0x4037
#define MDIO_848xx_TOP_CFG_SCRATCH_REG27                0x4038
#define MDIO_848xx_TOP_CFG_SCRATCH_REG28                0x4039
#define MDIO_848xx_TOP_CFG_SCRATCH_REG29                0x403a
#define MDIO_848xx_TOP_CFG_SCRATCH_REG30                0x403b
#define MDIO_848xx_TOP_CFG_SCRATCH_REG31                0x403c
#define MDIO_848xx_CMD_HDLR_COMMAND     (MDIO_848xx_TOP_CFG_SCRATCH_REG0)
#define MDIO_848xx_CMD_HDLR_STATUS      (MDIO_848xx_TOP_CFG_SCRATCH_REG26)
#define MDIO_848xx_CMD_HDLR_DATA1       (MDIO_848xx_TOP_CFG_SCRATCH_REG27)
#define MDIO_848xx_CMD_HDLR_DATA2       (MDIO_848xx_TOP_CFG_SCRATCH_REG28)
#define MDIO_848xx_CMD_HDLR_DATA3       (MDIO_848xx_TOP_CFG_SCRATCH_REG29)
#define MDIO_848xx_CMD_HDLR_DATA4       (MDIO_848xx_TOP_CFG_SCRATCH_REG30)
#define MDIO_848xx_CMD_HDLR_DATA5       (MDIO_848xx_TOP_CFG_SCRATCH_REG31)

/* Mailbox command set used by 84833/84858 */
#define PHY848xx_CMD_SET_PAIR_SWAP                      0x8001
#define PHY848xx_CMD_GET_EEE_MODE                       0x8008
#define PHY848xx_CMD_SET_EEE_MODE                       0x8009
#define PHY848xx_CMD_GET_CURRENT_TEMP                   0x8031
/* Mailbox status set used by 84833 only */
#define PHY84833_STATUS_CMD_RECEIVED                    0x0001
#define PHY84833_STATUS_CMD_IN_PROGRESS                 0x0002
#define PHY84833_STATUS_CMD_COMPLETE_PASS               0x0004
#define PHY84833_STATUS_CMD_COMPLETE_ERROR              0x0008
#define PHY84833_STATUS_CMD_OPEN_FOR_CMDS               0x0010
#define PHY84833_STATUS_CMD_SYSTEM_BOOT                 0x0020
#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS           0x0040
#define PHY84833_STATUS_CMD_CLEAR_COMPLETE              0x0080
#define PHY84833_STATUS_CMD_OPEN_OVERRIDE               0xa5a5
/* Mailbox Process */
#define PHY84833_MB_PROCESS1                            1
#define PHY84833_MB_PROCESS2                            2
#define PHY84833_MB_PROCESS3                            3

/* Mailbox status set used by 84858 only */
#define PHY84858_STATUS_CMD_RECEIVED                    0x0001
#define PHY84858_STATUS_CMD_IN_PROGRESS                 0x0002
#define PHY84858_STATUS_CMD_COMPLETE_PASS               0x0004
#define PHY84858_STATUS_CMD_COMPLETE_ERROR              0x0008
#define PHY84858_STATUS_CMD_SYSTEM_BUSY                 0xbbbb


/* Warpcore clause 45 addressing */
#define MDIO_WC_DEVAD                                   0x3
#define MDIO_WC_REG_IEEE0BLK_MIICNTL                    0x0
#define MDIO_WC_REG_IEEE0BLK_AUTONEGNP                  0x7
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0       0x10
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1       0x11
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2       0x12
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY     0x4000
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ         0x8000
#define MDIO_WC_REG_PCS_STATUS2                         0x0021
#define MDIO_WC_REG_PMD_KR_CONTROL                      0x0096
#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL                0x8000
#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1               0x800e
#define MDIO_WC_REG_XGXSBLK1_DESKEW                     0x8010
#define MDIO_WC_REG_XGXSBLK1_LANECTRL0                  0x8015
#define MDIO_WC_REG_XGXSBLK1_LANECTRL1                  0x8016
#define MDIO_WC_REG_XGXSBLK1_LANECTRL2                  0x8017
#define MDIO_WC_REG_XGXSBLK1_LANECTRL3                  0x8018
#define MDIO_WC_REG_XGXSBLK1_LANETEST0                  0x801a
#define MDIO_WC_REG_TX0_ANA_CTRL0                       0x8061
#define MDIO_WC_REG_TX1_ANA_CTRL0                       0x8071
#define MDIO_WC_REG_TX2_ANA_CTRL0                       0x8081
#define MDIO_WC_REG_TX3_ANA_CTRL0                       0x8091
#define MDIO_WC_REG_TX0_TX_DRIVER                       0x8067
#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET                   0x01
#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_MASK                             0x000e
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET            0x04
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK                      0x00f0
#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET                0x08
#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_MASK                          0x0f00
#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET            0x0c
#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_MASK                      0x7000
#define MDIO_WC_REG_TX1_TX_DRIVER                       0x8077
#define MDIO_WC_REG_TX2_TX_DRIVER                       0x8087
#define MDIO_WC_REG_TX3_TX_DRIVER                       0x8097
#define MDIO_WC_REG_RX0_ANARXCONTROL1G                  0x80b9
#define MDIO_WC_REG_RX2_ANARXCONTROL1G                  0x80d9
#define MDIO_WC_REG_RX0_PCI_CTRL                        0x80ba
#define MDIO_WC_REG_RX1_PCI_CTRL                        0x80ca
#define MDIO_WC_REG_RX2_PCI_CTRL                        0x80da
#define MDIO_WC_REG_RX3_PCI_CTRL                        0x80ea
#define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI              0x80fa
#define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G           0x8104
#define MDIO_WC_REG_XGXSBLK2_LANE_RESET                 0x810a
#define MDIO_WC_REG_XGXS_STATUS3                        0x8129
#define MDIO_WC_REG_PAR_DET_10G_STATUS                  0x8130
#define MDIO_WC_REG_PAR_DET_10G_CTRL                    0x8131
#define MDIO_WC_REG_XGXS_STATUS4                        0x813c
#define MDIO_WC_REG_XGXS_X2_CONTROL2                    0x8141
#define MDIO_WC_REG_XGXS_X2_CONTROL3                    0x8142
#define MDIO_WC_REG_XGXS_RX_LN_SWAP1                    0x816B
#define MDIO_WC_REG_XGXS_TX_LN_SWAP1                    0x8169
#define MDIO_WC_REG_GP2_STATUS_GP_2_0                   0x81d0
#define MDIO_WC_REG_GP2_STATUS_GP_2_1                   0x81d1
#define MDIO_WC_REG_GP2_STATUS_GP_2_2                   0x81d2
#define MDIO_WC_REG_GP2_STATUS_GP_2_3                   0x81d3
#define MDIO_WC_REG_GP2_STATUS_GP_2_4                   0x81d4
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010
#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1
#define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP                0x81EE
#define MDIO_WC_REG_UC_INFO_B1_VERSION                  0x81F0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE            0x81F2
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET    0x0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT        0x0
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR     0x1
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC        0x2
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI      0x3
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G     0x4
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET    0x4
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET    0x8
#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET    0xc
#define MDIO_WC_REG_UC_INFO_B1_CRC                      0x81FE
#define MDIO_WC_REG_DSC1B0_UC_CTRL                              0x820e
#define MDIO_WC_REG_DSC1B0_UC_CTRL_RDY4CMD                      (1<<7)
#define MDIO_WC_REG_DSC_SMC                             0x8213
#define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0               0x821e
#define MDIO_WC_REG_TX_FIR_TAP                          0x82e2
#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET           0x00
#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK                     0x000f
#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET          0x04
#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK            0x03f0
#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET          0x0a
#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK            0x7c00
#define MDIO_WC_REG_TX_FIR_TAP_ENABLE           0x8000
#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP         0x82e2
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL      0x82e3
#define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL        0x82e6
#define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL        0x82e7
#define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL       0x82e8
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL      0x82ec
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1         0x8300
#define AUTODET_EN                              (1 << 4)
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2         0x8301
#define EN_PARALLEL_DET                         1
#define FILTER_FORCE_LINK                       (1 << 2)
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3         0x8302
#define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1          0x8304
#define MDIO_WC_REG_SERDESDIGITAL_MISC1                 0x8308
#define MDIO_WC_REG_SERDESDIGITAL_MISC2                 0x8309
#define MDIO_WC_REG_DIGITAL3_UP1                        0x8329
#define MDIO_WC_REG_DIGITAL3_LP_UP1                     0x832c
#define MDIO_WC_REG_DIGITAL4_MISC3                      0x833c
#define MDIO_WC_REG_DIGITAL4_MISC5                      0x833e
#define MDIO_WC_REG_DIGITAL5_MISC6                      0x8345
#define MDIO_WC_REG_DIGITAL5_MISC7                      0x8349
#define MDIO_WC_REG_DIGITAL5_LINK_STATUS                0x834d
#define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED               0x834e
#define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL           0x8350
#define MDIO_WC_REG_CL49_USERB0_CTRL                    0x8368
#define MDIO_WC_REG_CL73_USERB0_CTRL                    0x8370
#define MDIO_WC_REG_CL73_USERB0_USTAT                   0x8371
#define MDIO_WC_REG_CL73_BAM_CTRL1                      0x8372
#define MDIO_WC_REG_CL73_BAM_CTRL2                      0x8373
#define MDIO_WC_REG_CL73_BAM_CTRL3                      0x8374
#define MDIO_WC_REG_CL73_BAM_CODE_FIELD                 0x837b
#define MDIO_WC_REG_EEE_COMBO_CONTROL0                  0x8390
#define MDIO_WC_REG_TX66_CONTROL                        0x83b0
#define MDIO_WC_REG_RX66_CONTROL                        0x83c0
#define MDIO_WC_REG_RX66_SCW0                           0x83c2
#define MDIO_WC_REG_RX66_SCW1                           0x83c3
#define MDIO_WC_REG_RX66_SCW2                           0x83c4
#define MDIO_WC_REG_RX66_SCW3                           0x83c5
#define MDIO_WC_REG_RX66_SCW0_MASK                      0x83c6
#define MDIO_WC_REG_RX66_SCW1_MASK                      0x83c7
#define MDIO_WC_REG_RX66_SCW2_MASK                      0x83c8
#define MDIO_WC_REG_RX66_SCW3_MASK                      0x83c9
#define MDIO_WC_REG_FX100_CTRL1                         0x8400
#define MDIO_WC_REG_FX100_CTRL3                         0x8402
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL5                0x8436
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL6                0x8437
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL7                0x8438
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL9                0x8439
#define MDIO_WC_REG_CL82_USERB1_RX_CTRL10               0x843a
#define MDIO_WC_REG_CL82_USERB1_RX_CTRL11               0x843b
#define MDIO_WC_REG_ETA_CL73_OUI1                       0x8453
#define MDIO_WC_REG_ETA_CL73_OUI2                       0x8454
#define MDIO_WC_REG_ETA_CL73_OUI3                       0x8455
#define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE                0x8456
#define MDIO_WC_REG_ETA_CL73_LD_UD_CODE                 0x8457
#define MDIO_WC_REG_MICROBLK_CMD                        0xffc2
#define MDIO_WC_REG_MICROBLK_DL_STATUS                  0xffc5
#define MDIO_WC_REG_MICROBLK_CMD3                       0xffcc

#define MDIO_WC_REG_AERBLK_AER                          0xffde
#define MDIO_WC_REG_COMBO_IEEE0_MIICTRL                 0xffe0
#define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT                0xffe1

#define MDIO_WC0_XGXS_BLK2_LANE_RESET                   0x810A
#define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT       0
#define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT       4

#define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2             0x8141

#define DIGITAL5_ACTUAL_SPEED_TX_MASK                   0x003f

/* 54618se */
#define MDIO_REG_GPHY_MII_STATUS                        0x1
#define MDIO_REG_GPHY_PHYID_LSB                         0x3
#define MDIO_REG_GPHY_CL45_ADDR_REG                     0xd
#define MDIO_REG_GPHY_CL45_REG_WRITE            0x4000
#define MDIO_REG_GPHY_CL45_REG_READ             0xc000
#define MDIO_REG_GPHY_CL45_DATA_REG                     0xe
#define MDIO_REG_GPHY_EEE_RESOLVED              0x803e
#define MDIO_REG_GPHY_BASET_EXT_CTRL                    0x10
#define MDIO_REG_GPHY_TX_HIGH_LATENCY           0x1
#define MDIO_REG_GPHY_EXP_ACCESS_GATE                   0x15
#define MDIO_REG_GPHY_EXP_ACCESS                        0x17
#define MDIO_REG_GPHY_EXP_ACCESS_TOP            0xd00
#define MDIO_REG_GPHY_EXP_TOP_2K_BUF            0x40
#define MDIO_REG_GPHY_SHADOW_ACCESS                     0x18
#define MDIO_REG_GPHY_SHADOW_AUX_CTRL                   (0x0)
#define MDIO_REG_GPHY_SHADOW_MISC_CTRL                  (0x7)
#define MDIO_REG_GPHY_AUX_STATUS                        0x19
#define MDIO_REG_INTR_STATUS                            0x1a
#define MDIO_REG_INTR_MASK                              0x1b
#define MDIO_REG_INTR_MASK_LINK_STATUS                  (0x1 << 1)
#define MDIO_REG_GPHY_SHADOW                            0x1c
#define MDIO_REG_GPHY_SHADOW_LED_SEL1                   (0x0d << 10)
#define MDIO_REG_GPHY_SHADOW_LED_SEL2                   (0x0e << 10)
#define MDIO_REG_GPHY_SHADOW_WR_ENA                     (0x1 << 15)
#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED               (0x1e << 10)
#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD              (0x1 << 8)

#define IGU_FUNC_BASE                   0x0400

#define IGU_ADDR_MSIX                   0x0000
#define IGU_ADDR_INT_ACK                0x0200
#define IGU_ADDR_PROD_UPD               0x0201
#define IGU_ADDR_ATTN_BITS_UPD  0x0202
#define IGU_ADDR_ATTN_BITS_SET  0x0203
#define IGU_ADDR_ATTN_BITS_CLR  0x0204
#define IGU_ADDR_COALESCE_NOW   0x0205
#define IGU_ADDR_SIMD_MASK              0x0206
#define IGU_ADDR_SIMD_NOMASK    0x0207
#define IGU_ADDR_MSI_CTL                0x0210
#define IGU_ADDR_MSI_ADDR_LO    0x0211
#define IGU_ADDR_MSI_ADDR_HI    0x0212
#define IGU_ADDR_MSI_DATA               0x0213


#define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup  0
#define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup  1
#define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup  2
#define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup  3

#define COMMAND_REG_INT_ACK         0x0
#define COMMAND_REG_PROD_UPD        0x4
#define COMMAND_REG_ATTN_BITS_UPD   0x8
#define COMMAND_REG_ATTN_BITS_SET   0xc
#define COMMAND_REG_ATTN_BITS_CLR   0x10
#define COMMAND_REG_COALESCE_NOW    0x14
#define COMMAND_REG_SIMD_MASK       0x18
#define COMMAND_REG_SIMD_NOMASK     0x1c


#define IGU_MEM_BASE                                            0x0000

#define IGU_MEM_MSIX_BASE                                       0x0000
#define IGU_MEM_MSIX_UPPER                                      0x007f
#define IGU_MEM_MSIX_RESERVED_UPPER                     0x01ff

#define IGU_MEM_PBA_MSIX_BASE                           0x0200
#define IGU_MEM_PBA_MSIX_UPPER                          0x0200

#define IGU_CMD_BACKWARD_COMP_PROD_UPD          0x0201
#define IGU_MEM_PBA_MSIX_RESERVED_UPPER         0x03ff

#define IGU_CMD_INT_ACK_BASE                            0x0400
#define IGU_CMD_INT_ACK_UPPER \
        (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PATH - 1)
#define IGU_CMD_INT_ACK_RESERVED_UPPER          0x04ff

#define IGU_CMD_E2_PROD_UPD_BASE                        0x0500
#define IGU_CMD_E2_PROD_UPD_UPPER \
        (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PATH  - 1)
#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER      0x059f

#define IGU_CMD_ATTN_BIT_UPD_UPPER                      0x05a0
#define IGU_CMD_ATTN_BIT_SET_UPPER                      0x05a1
#define IGU_CMD_ATTN_BIT_CLR_UPPER                      0x05a2

#define IGU_REG_SISR_MDPC_WMASK_UPPER           0x05a3
#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER       0x05a4
#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER       0x05a5
#define IGU_REG_SISR_MDPC_WOMASK_UPPER          0x05a6


#define IGU_REG_RESERVED_UPPER                          0x05ff

#define IGU_SEG_IDX_ATTN        2
#define IGU_SEG_IDX_DEFAULT     1
/* Fields of IGU PF CONFIGURATION REGISTER */
#define IGU_PF_CONF_FUNC_EN       (0x1<<0)  /* function enable        */
#define IGU_PF_CONF_MSI_MSIX_EN   (0x1<<1)  /* MSI/MSIX enable        */
#define IGU_PF_CONF_INT_LINE_EN   (0x1<<2)  /* INT enable             */
#define IGU_PF_CONF_ATTN_BIT_EN   (0x1<<3)  /* attention enable       */
#define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4)  /* single ISR mode enable */
#define IGU_PF_CONF_SIMD_MODE     (0x1<<5)  /* simd all ones mode     */

/* Fields of IGU VF CONFIGURATION REGISTER */
#define IGU_VF_CONF_FUNC_EN        (0x1<<0)  /* function enable        */
#define IGU_VF_CONF_MSI_MSIX_EN    (0x1<<1)  /* MSI/MSIX enable        */
#define IGU_VF_CONF_PARENT_MASK    (0x3<<2)  /* Parent PF              */
#define IGU_VF_CONF_PARENT_SHIFT   2         /* Parent PF              */
#define IGU_VF_CONF_SINGLE_ISR_EN  (0x1<<4)  /* single ISR mode enable */


#define IGU_BC_DSB_NUM_SEGS    5
#define IGU_BC_NDSB_NUM_SEGS   2
#define IGU_NORM_DSB_NUM_SEGS  2
#define IGU_NORM_NDSB_NUM_SEGS 1
#define IGU_BC_BASE_DSB_PROD   128
#define IGU_NORM_BASE_DSB_PROD 136

        /* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \
        [5:2] = 0; [1:0] = PF number) */
#define IGU_FID_ENCODE_IS_PF        (0x1<<6)
#define IGU_FID_ENCODE_IS_PF_SHIFT  6
#define IGU_FID_VF_NUM_MASK         (0x3f)
#define IGU_FID_PF_NUM_MASK         (0x7)

#define IGU_REG_MAPPING_MEMORY_VALID            (1<<0)
#define IGU_REG_MAPPING_MEMORY_VECTOR_MASK      (0x3F<<1)
#define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT     1
#define IGU_REG_MAPPING_MEMORY_FID_MASK         (0x7F<<7)
#define IGU_REG_MAPPING_MEMORY_FID_SHIFT        7


#define CDU_REGION_NUMBER_XCM_AG 2
#define CDU_REGION_NUMBER_UCM_AG 4


/* String-to-compress [31:8] = CID (all 24 bits)
 * String-to-compress [7:4] = Region
 * String-to-compress [3:0] = Type
 */
#define CDU_VALID_DATA(_cid, _region, _type) \
        (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
#define CDU_CRC8(_cid, _region, _type) \
        (ecore_calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type) \
        (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type) \
        (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)

#endif /* ECORE_REG_H */