4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 #ifndef RTE_ETH_BOND_8023AD_H_
35 #define RTE_ETH_BOND_8023AD_H_
37 #include <rte_ether.h>
44 * Actor/partner states
46 #define STATE_LACP_ACTIVE 0x01
47 #define STATE_LACP_SHORT_TIMEOUT 0x02
48 #define STATE_AGGREGATION 0x04
49 #define STATE_SYNCHRONIZATION 0x08
50 #define STATE_COLLECTING 0x10
51 #define STATE_DISTRIBUTING 0x20
52 /** Partners parameters are defaulted */
53 #define STATE_DEFAULTED 0x40
54 #define STATE_EXPIRED 0x80
56 #define TLV_TYPE_ACTOR_INFORMATION 0x01
57 #define TLV_TYPE_PARTNER_INFORMATION 0x02
58 #define TLV_TYPE_COLLECTOR_INFORMATION 0x03
59 #define TLV_TYPE_TERMINATOR_INFORMATION 0x00
61 #define SLOW_SUBTYPE_LACP 0x01
62 #define SLOW_SUBTYPE_MARKER 0x02
64 #define MARKER_TLV_TYPE_INFO 0x01
65 #define MARKER_TLV_TYPE_RESP 0x02
67 typedef void (*rte_eth_bond_8023ad_ext_slowrx_fn)(uint8_t slave_id,
68 struct rte_mbuf *lacp_pkt);
70 enum rte_bond_8023ad_selection {
76 enum rte_bond_8023ad_agg_selection {
82 /** Generic slow protocol structure */
83 struct slow_protocol {
85 uint8_t reserved_119[119];
86 } __attribute__((__packed__));
88 /** Generic slow protocol frame type structure */
89 struct slow_protocol_frame {
90 struct ether_hdr eth_hdr;
91 struct slow_protocol slow_protocol;
92 } __attribute__((__packed__));
95 uint16_t system_priority;
96 /**< System priority (unused in current implementation) */
97 struct ether_addr system;
98 /**< System ID - Slave MAC address, same as bonding MAC address */
100 /**< Speed information (implementation dependednt) and duplex. */
101 uint16_t port_priority;
102 /**< Priority of this (unused in current implementation) */
103 uint16_t port_number;
104 /**< Port number. It corresponds to slave port id. */
105 } __attribute__((__packed__));
107 struct lacpdu_actor_partner_params {
108 uint8_t tlv_type_info;
110 struct port_params port_params;
112 uint8_t reserved_3[3];
113 } __attribute__((__packed__));
115 /** LACPDU structure (5.4.2 in 802.1AX documentation). */
118 uint8_t version_number;
120 struct lacpdu_actor_partner_params actor;
121 struct lacpdu_actor_partner_params partner;
123 uint8_t tlv_type_collector_info;
124 uint8_t collector_info_length;
125 uint16_t collector_max_delay;
126 uint8_t reserved_12[12];
128 uint8_t tlv_type_terminator;
129 uint8_t terminator_length;
130 uint8_t reserved_50[50];
131 } __attribute__((__packed__));
133 /** LACPDU frame: Contains ethernet header and LACPDU. */
134 struct lacpdu_header {
135 struct ether_hdr eth_hdr;
136 struct lacpdu lacpdu;
137 } __attribute__((__packed__));
141 uint8_t version_number;
143 uint8_t tlv_type_marker;
145 uint16_t requester_port;
146 struct ether_addr requester_system;
147 uint32_t requester_transaction_id;
148 uint8_t reserved_2[2];
150 uint8_t tlv_type_terminator;
151 uint8_t terminator_length;
152 uint8_t reserved_90[90];
153 } __attribute__((__packed__));
155 struct marker_header {
156 struct ether_hdr eth_hdr;
157 struct marker marker;
158 } __attribute__((__packed__));
160 struct rte_eth_bond_8023ad_conf {
161 uint32_t fast_periodic_ms;
162 uint32_t slow_periodic_ms;
163 uint32_t short_timeout_ms;
164 uint32_t long_timeout_ms;
165 uint32_t aggregate_wait_timeout_ms;
166 uint32_t tx_period_ms;
167 uint32_t rx_marker_period_ms;
168 uint32_t update_timeout_ms;
169 rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
170 enum rte_bond_8023ad_agg_selection agg_selection;
173 struct rte_eth_bond_8023ad_slave_info {
174 enum rte_bond_8023ad_selection selected;
176 struct port_params actor;
177 uint8_t partner_state;
178 struct port_params partner;
185 * Function returns current configuration of 802.3AX mode.
187 * @param port_id Bonding device id
188 * @param conf Pointer to timeout structure.
192 * -EINVAL if conf is NULL
195 rte_eth_bond_8023ad_conf_get(uint8_t port_id,
196 struct rte_eth_bond_8023ad_conf *conf);
198 rte_eth_bond_8023ad_conf_get_v20(uint8_t port_id,
199 struct rte_eth_bond_8023ad_conf *conf);
201 rte_eth_bond_8023ad_conf_get_v1607(uint8_t port_id,
202 struct rte_eth_bond_8023ad_conf *conf);
204 rte_eth_bond_8023ad_conf_get_v1708(uint8_t port_id,
205 struct rte_eth_bond_8023ad_conf *conf);
210 * Function set new configuration of 802.3AX mode.
212 * @param port_id Bonding device id
213 * @param conf Configuration, if NULL set default configuration.
216 * -EINVAL if configuration is invalid.
219 rte_eth_bond_8023ad_setup(uint8_t port_id,
220 struct rte_eth_bond_8023ad_conf *conf);
222 rte_eth_bond_8023ad_setup_v20(uint8_t port_id,
223 struct rte_eth_bond_8023ad_conf *conf);
225 rte_eth_bond_8023ad_setup_v1607(uint8_t port_id,
226 struct rte_eth_bond_8023ad_conf *conf);
228 rte_eth_bond_8023ad_setup_v1708(uint8_t port_id,
229 struct rte_eth_bond_8023ad_conf *conf);
234 * Function returns current state of given slave device.
236 * @param slave_id Port id of valid slave.
237 * @param conf buffer for configuration
240 * -EINVAL if conf is NULL or slave id is invalid (not a slave of given
241 * bonded device or is not inactive).
244 rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id,
245 struct rte_eth_bond_8023ad_slave_info *conf);
252 * Configure a slave port to start collecting.
254 * @param port_id Bonding device id
255 * @param slave_id Port id of valid slave.
256 * @param enabled Non-zero when collection enabled.
259 * -EINVAL if slave is not valid.
262 rte_eth_bond_8023ad_ext_collect(uint8_t port_id, uint8_t slave_id, int enabled);
265 * Get COLLECTING flag from slave port actor state.
267 * @param port_id Bonding device id
268 * @param slave_id Port id of valid slave.
272 * -EINVAL if slave is not valid.
275 rte_eth_bond_8023ad_ext_collect_get(uint8_t port_id, uint8_t slave_id);
278 * Configure a slave port to start distributing.
280 * @param port_id Bonding device id
281 * @param slave_id Port id of valid slave.
282 * @param enabled Non-zero when distribution enabled.
285 * -EINVAL if slave is not valid.
288 rte_eth_bond_8023ad_ext_distrib(uint8_t port_id, uint8_t slave_id, int enabled);
291 * Get DISTRIBUTING flag from slave port actor state.
293 * @param port_id Bonding device id
294 * @param slave_id Port id of valid slave.
298 * -EINVAL if slave is not valid.
301 rte_eth_bond_8023ad_ext_distrib_get(uint8_t port_id, uint8_t slave_id);
304 * LACPDU transmit path for external 802.3ad state machine. Caller retains
305 * ownership of the packet on failure.
307 * @param port_id Bonding device id
308 * @param slave_id Port ID of valid slave device.
309 * @param lacp_pkt mbuf containing LACPDU.
312 * 0 on success, negative value otherwise.
315 rte_eth_bond_8023ad_ext_slowtx(uint8_t port_id, uint8_t slave_id,
316 struct rte_mbuf *lacp_pkt);
319 * Enable dedicated hw queues for 802.3ad control plane traffic on on slaves
321 * This function creates an additional tx and rx queue on each slave for
322 * dedicated 802.3ad control plane traffic . A flow filtering rule is
323 * programmed on each slave to redirect all LACP slow packets to that rx queue
324 * for processing in the LACP state machine, this removes the need to filter
325 * these packets in the bonded devices data path. The additional tx queue is
326 * used to enable the LACP state machine to enqueue LACP packets directly to
327 * slave hw independently of the bonded devices data path.
329 * To use this feature all slaves must support the programming of the flow
330 * filter rule required for rx and have enough queues that one rx and tx queue
331 * can be reserved for the LACP state machines control packets.
333 * Bonding port must be stopped to change this configuration.
335 * @param port_id Bonding device id
338 * 0 on success, negative value otherwise.
341 rte_eth_bond_8023ad_dedicated_queues_enable(uint8_t port_id);
344 * Disable slow queue on slaves
346 * This function disables hardware slow packet filter.
348 * Bonding port must be stopped to change this configuration.
350 * @see rte_eth_bond_8023ad_slow_pkt_hw_filter_enable
352 * @param port_id Bonding device id
354 * 0 on success, negative value otherwise.
358 rte_eth_bond_8023ad_dedicated_queues_disable(uint8_t port_id);
361 * Get aggregator mode for 8023ad
362 * @param port_id Bonding device id
365 * agregator mode on success, negative value otherwise
368 rte_eth_bond_8023ad_agg_selection_get(uint8_t port_id);
371 * Set aggregator mode for 8023ad
372 * @param port_id Bonding device id
374 * 0 on success, negative value otherwise
377 rte_eth_bond_8023ad_agg_selection_set(uint8_t port_id,
378 enum rte_bond_8023ad_agg_selection agg_selection);
379 #endif /* RTE_ETH_BOND_8023AD_H_ */