1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2014-2018 Chelsio Communications.
6 #include <netinet/in.h>
8 #include <rte_interrupts.h>
10 #include <rte_debug.h>
12 #include <rte_branch_prediction.h>
13 #include <rte_memory.h>
14 #include <rte_tailq.h>
16 #include <rte_alarm.h>
17 #include <rte_ether.h>
18 #include <ethdev_driver.h>
19 #include <rte_malloc.h>
20 #include <rte_random.h>
22 #include <rte_byteorder.h>
26 #include "t4_regs_values.h"
27 #include "t4fw_interface.h"
30 * t4_read_mtu_tbl - returns the values in the HW path MTU table
32 * @mtus: where to store the MTU values
33 * @mtu_log: where to store the MTU base-2 log (may be %NULL)
35 * Reads the HW path MTU table.
37 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
42 for (i = 0; i < NMTUS; ++i) {
43 t4_write_reg(adap, A_TP_MTU_TABLE,
44 V_MTUINDEX(0xff) | V_MTUVALUE(i));
45 v = t4_read_reg(adap, A_TP_MTU_TABLE);
46 mtus[i] = G_MTUVALUE(v);
48 mtu_log[i] = G_MTUWIDTH(v);
53 * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
55 * @addr: the indirect TP register address
56 * @mask: specifies the field within the register to modify
57 * @val: new value for the field
59 * Sets a field of an indirect TP register to the given value.
61 void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
62 unsigned int mask, unsigned int val)
64 t4_write_reg(adap, A_TP_PIO_ADDR, addr);
65 val |= t4_read_reg(adap, A_TP_PIO_DATA) & ~mask;
66 t4_write_reg(adap, A_TP_PIO_DATA, val);
69 /* The minimum additive increment value for the congestion control table */
70 #define CC_MIN_INCR 2U
73 * t4_load_mtus - write the MTU and congestion control HW tables
75 * @mtus: the values for the MTU table
76 * @alpha: the values for the congestion control alpha parameter
77 * @beta: the values for the congestion control beta parameter
79 * Write the HW MTU table with the supplied MTUs and the high-speed
80 * congestion control table with the supplied alpha, beta, and MTUs.
81 * We write the two tables together because the additive increments
84 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
85 const unsigned short *alpha, const unsigned short *beta)
87 static const unsigned int avg_pkts[NCCTRL_WIN] = {
88 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
89 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
90 28672, 40960, 57344, 81920, 114688, 163840, 229376
95 for (i = 0; i < NMTUS; ++i) {
96 unsigned int mtu = mtus[i];
97 unsigned int log2 = cxgbe_fls(mtu);
99 if (!(mtu & ((1 << log2) >> 2))) /* round */
101 t4_write_reg(adap, A_TP_MTU_TABLE, V_MTUINDEX(i) |
102 V_MTUWIDTH(log2) | V_MTUVALUE(mtu));
104 for (w = 0; w < NCCTRL_WIN; ++w) {
107 inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
110 t4_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) |
111 (w << 16) | (beta[w] << 13) | inc);
117 * t4_wait_op_done_val - wait until an operation is completed
118 * @adapter: the adapter performing the operation
119 * @reg: the register to check for completion
120 * @mask: a single-bit field within @reg that indicates completion
121 * @polarity: the value of the field when the operation is completed
122 * @attempts: number of check iterations
123 * @delay: delay in usecs between iterations
124 * @valp: where to store the value of the register at completion time
126 * Wait until an operation is completed by checking a bit in a register
127 * up to @attempts times. If @valp is not NULL the value of the register
128 * at the time it indicated completion is stored there. Returns 0 if the
129 * operation completes and -EAGAIN otherwise.
131 int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
132 int polarity, int attempts, int delay, u32 *valp)
135 u32 val = t4_read_reg(adapter, reg);
137 if (!!(val & mask) == polarity) {
150 * t4_set_reg_field - set a register field to a value
151 * @adapter: the adapter to program
152 * @addr: the register address
153 * @mask: specifies the portion of the register to modify
154 * @val: the new value for the register field
156 * Sets a register field specified by the supplied mask to the
159 void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
162 u32 v = t4_read_reg(adapter, addr) & ~mask;
164 t4_write_reg(adapter, addr, v | val);
165 (void)t4_read_reg(adapter, addr); /* flush */
169 * t4_read_indirect - read indirectly addressed registers
171 * @addr_reg: register holding the indirect address
172 * @data_reg: register holding the value of the indirect register
173 * @vals: where the read register values are stored
174 * @nregs: how many indirect registers to read
175 * @start_idx: index of first indirect register to read
177 * Reads registers that are accessed indirectly through an address/data
180 void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
181 unsigned int data_reg, u32 *vals, unsigned int nregs,
182 unsigned int start_idx)
185 t4_write_reg(adap, addr_reg, start_idx);
186 *vals++ = t4_read_reg(adap, data_reg);
192 * t4_write_indirect - write indirectly addressed registers
194 * @addr_reg: register holding the indirect addresses
195 * @data_reg: register holding the value for the indirect registers
196 * @vals: values to write
197 * @nregs: how many indirect registers to write
198 * @start_idx: address of first indirect register to write
200 * Writes a sequential block of registers that are accessed indirectly
201 * through an address/data register pair.
203 void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
204 unsigned int data_reg, const u32 *vals,
205 unsigned int nregs, unsigned int start_idx)
208 t4_write_reg(adap, addr_reg, start_idx++);
209 t4_write_reg(adap, data_reg, *vals++);
214 * t4_report_fw_error - report firmware error
217 * The adapter firmware can indicate error conditions to the host.
218 * If the firmware has indicated an error, print out the reason for
219 * the firmware error.
221 static void t4_report_fw_error(struct adapter *adap)
223 static const char * const reason[] = {
224 "Crash", /* PCIE_FW_EVAL_CRASH */
225 "During Device Preparation", /* PCIE_FW_EVAL_PREP */
226 "During Device Configuration", /* PCIE_FW_EVAL_CONF */
227 "During Device Initialization", /* PCIE_FW_EVAL_INIT */
228 "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */
229 "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */
230 "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */
231 "Reserved", /* reserved */
235 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
236 if (pcie_fw & F_PCIE_FW_ERR)
237 pr_err("%s: Firmware reports adapter error: %s\n",
238 __func__, reason[G_PCIE_FW_EVAL(pcie_fw)]);
242 * Get the reply to a mailbox command and store it in @rpl in big-endian order.
244 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
247 for ( ; nflit; nflit--, mbox_addr += 8)
248 *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
252 * Handle a FW assertion reported in a mailbox.
254 static void fw_asrt(struct adapter *adap, u32 mbox_addr)
256 struct fw_debug_cmd asrt;
258 get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
259 pr_warn("FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
260 asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line),
261 be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
264 #define X_CIM_PF_NOACCESS 0xeeeeeeee
267 * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox
269 * @mbox: index of the mailbox to use
270 * @cmd: the command to write
271 * @size: command length in bytes
272 * @rpl: where to optionally store the reply
273 * @sleep_ok: if true we may sleep while awaiting command completion
274 * @timeout: time to wait for command to finish before timing out
275 * (negative implies @sleep_ok=false)
277 * Sends the given command to FW through the selected mailbox and waits
278 * for the FW to execute the command. If @rpl is not %NULL it is used to
279 * store the FW's reply to the command. The command and its optional
280 * reply are of the same length. Some FW commands like RESET and
281 * INITIALIZE can take a considerable amount of time to execute.
282 * @sleep_ok determines whether we may sleep while awaiting the response.
283 * If sleeping is allowed we use progressive backoff otherwise we spin.
284 * Note that passing in a negative @timeout is an alternate mechanism
285 * for specifying @sleep_ok=false. This is useful when a higher level
286 * interface allows for specification of @timeout but not @sleep_ok ...
288 * Returns 0 on success or a negative errno on failure. A
289 * failure can happen either because we are not able to execute the
290 * command or FW executes it but signals an error. In the latter case
291 * the return value is the error code indicated by FW (negated).
293 int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox,
294 const void __attribute__((__may_alias__)) *cmd,
295 int size, void *rpl, bool sleep_ok, int timeout)
298 * We delay in small increments at first in an effort to maintain
299 * responsiveness for simple, fast executing commands but then back
300 * off to larger delays to a maximum retry delay.
302 static const int delay[] = {
303 1, 1, 3, 5, 10, 10, 20, 50, 100
306 u32 data_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_DATA);
307 u32 ctl_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_CTRL);
308 struct mbox_entry *entry;
309 u32 v, ctl, pcie_fw = 0;
310 unsigned int delay_idx;
315 if ((size & 15) != 0 || size > MBOX_LEN)
319 * If we have a negative timeout, that implies that we can't sleep.
326 entry = t4_os_alloc(sizeof(*entry));
331 * Queue ourselves onto the mailbox access list. When our entry is at
332 * the front of the list, we have rights to access the mailbox. So we
333 * wait [for a while] till we're at the front [or bail out with an
336 t4_os_atomic_add_tail(entry, &adap->mbox_list, &adap->mbox_lock);
341 for (i = 0; ; i += ms) {
343 * If we've waited too long, return a busy indication. This
344 * really ought to be based on our initial position in the
345 * mailbox access list but this is a start. We very rarely
346 * contend on access to the mailbox ... Also check for a
347 * firmware error which we'll report as a device error.
349 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
350 if (i > 4 * timeout || (pcie_fw & F_PCIE_FW_ERR)) {
351 t4_os_atomic_list_del(entry, &adap->mbox_list,
353 t4_report_fw_error(adap);
354 ret = ((pcie_fw & F_PCIE_FW_ERR) != 0) ? -ENXIO : -EBUSY;
359 * If we're at the head, break out and start the mailbox
362 if (t4_os_list_first_entry(&adap->mbox_list) == entry)
366 * Delay for a bit before checking again ...
369 ms = delay[delay_idx]; /* last element may repeat */
370 if (delay_idx < ARRAY_SIZE(delay) - 1)
379 * Attempt to gain access to the mailbox.
381 for (i = 0; i < 4; i++) {
382 ctl = t4_read_reg(adap, ctl_reg);
384 if (v != X_MBOWNER_NONE)
389 * If we were unable to gain access, dequeue ourselves from the
390 * mailbox atomic access list and report the error to our caller.
392 if (v != X_MBOWNER_PL) {
393 t4_os_atomic_list_del(entry, &adap->mbox_list,
395 t4_report_fw_error(adap);
396 ret = (v == X_MBOWNER_FW) ? -EBUSY : -ETIMEDOUT;
401 * If we gain ownership of the mailbox and there's a "valid" message
402 * in it, this is likely an asynchronous error message from the
403 * firmware. So we'll report that and then proceed on with attempting
404 * to issue our own command ... which may well fail if the error
405 * presaged the firmware crashing ...
407 if (ctl & F_MBMSGVALID) {
408 dev_err(adap, "found VALID command in mbox %u: "
409 "%llx %llx %llx %llx %llx %llx %llx %llx\n", mbox,
410 (unsigned long long)t4_read_reg64(adap, data_reg),
411 (unsigned long long)t4_read_reg64(adap, data_reg + 8),
412 (unsigned long long)t4_read_reg64(adap, data_reg + 16),
413 (unsigned long long)t4_read_reg64(adap, data_reg + 24),
414 (unsigned long long)t4_read_reg64(adap, data_reg + 32),
415 (unsigned long long)t4_read_reg64(adap, data_reg + 40),
416 (unsigned long long)t4_read_reg64(adap, data_reg + 48),
417 (unsigned long long)t4_read_reg64(adap, data_reg + 56));
421 * Copy in the new mailbox command and send it on its way ...
423 for (i = 0, p = cmd; i < size; i += 8, p++)
424 t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p));
426 CXGBE_DEBUG_MBOX(adap, "%s: mbox %u: %016llx %016llx %016llx %016llx "
427 "%016llx %016llx %016llx %016llx\n", __func__, (mbox),
428 (unsigned long long)t4_read_reg64(adap, data_reg),
429 (unsigned long long)t4_read_reg64(adap, data_reg + 8),
430 (unsigned long long)t4_read_reg64(adap, data_reg + 16),
431 (unsigned long long)t4_read_reg64(adap, data_reg + 24),
432 (unsigned long long)t4_read_reg64(adap, data_reg + 32),
433 (unsigned long long)t4_read_reg64(adap, data_reg + 40),
434 (unsigned long long)t4_read_reg64(adap, data_reg + 48),
435 (unsigned long long)t4_read_reg64(adap, data_reg + 56));
437 t4_write_reg(adap, ctl_reg, F_MBMSGVALID | V_MBOWNER(X_MBOWNER_FW));
438 t4_read_reg(adap, ctl_reg); /* flush write */
444 * Loop waiting for the reply; bail out if we time out or the firmware
447 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
448 for (i = 0; i < timeout && !(pcie_fw & F_PCIE_FW_ERR); i += ms) {
450 ms = delay[delay_idx]; /* last element may repeat */
451 if (delay_idx < ARRAY_SIZE(delay) - 1)
458 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
459 v = t4_read_reg(adap, ctl_reg);
460 if (v == X_CIM_PF_NOACCESS)
462 if (G_MBOWNER(v) == X_MBOWNER_PL) {
463 if (!(v & F_MBMSGVALID)) {
464 t4_write_reg(adap, ctl_reg,
465 V_MBOWNER(X_MBOWNER_NONE));
469 CXGBE_DEBUG_MBOX(adap,
470 "%s: mbox %u: %016llx %016llx %016llx %016llx "
471 "%016llx %016llx %016llx %016llx\n", __func__, (mbox),
472 (unsigned long long)t4_read_reg64(adap, data_reg),
473 (unsigned long long)t4_read_reg64(adap, data_reg + 8),
474 (unsigned long long)t4_read_reg64(adap, data_reg + 16),
475 (unsigned long long)t4_read_reg64(adap, data_reg + 24),
476 (unsigned long long)t4_read_reg64(adap, data_reg + 32),
477 (unsigned long long)t4_read_reg64(adap, data_reg + 40),
478 (unsigned long long)t4_read_reg64(adap, data_reg + 48),
479 (unsigned long long)t4_read_reg64(adap, data_reg + 56));
481 CXGBE_DEBUG_MBOX(adap,
482 "command %#x completed in %d ms (%ssleeping)\n",
484 i + ms, sleep_ok ? "" : "non-");
486 res = t4_read_reg64(adap, data_reg);
487 if (G_FW_CMD_OP(res >> 32) == FW_DEBUG_CMD) {
488 fw_asrt(adap, data_reg);
489 res = V_FW_CMD_RETVAL(EIO);
491 get_mbox_rpl(adap, rpl, size / 8, data_reg);
493 t4_write_reg(adap, ctl_reg, V_MBOWNER(X_MBOWNER_NONE));
494 t4_os_atomic_list_del(entry, &adap->mbox_list,
496 ret = -G_FW_CMD_RETVAL((int)res);
502 * We timed out waiting for a reply to our mailbox command. Report
503 * the error and also check to see if the firmware reported any
506 dev_err(adap, "command %#x in mailbox %d timed out\n",
507 *(const u8 *)cmd, mbox);
508 t4_os_atomic_list_del(entry, &adap->mbox_list, &adap->mbox_lock);
509 t4_report_fw_error(adap);
510 ret = ((pcie_fw & F_PCIE_FW_ERR) != 0) ? -ENXIO : -ETIMEDOUT;
517 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
518 void *rpl, bool sleep_ok)
520 return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok,
525 * t4_get_regs_len - return the size of the chips register set
526 * @adapter: the adapter
528 * Returns the size of the chip's BAR0 register space.
530 unsigned int t4_get_regs_len(struct adapter *adapter)
532 unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
534 switch (chip_version) {
537 return T5_REGMAP_SIZE;
541 "Unsupported chip version %d\n", chip_version);
546 * t4_get_regs - read chip registers into provided buffer
548 * @buf: register buffer
549 * @buf_size: size (in bytes) of register buffer
551 * If the provided register buffer isn't large enough for the chip's
552 * full register range, the register dump will be truncated to the
553 * register buffer's size.
555 void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
557 static const unsigned int t5_reg_ranges[] = {
1332 static const unsigned int t6_reg_ranges[] = {
1893 u32 *buf_end = (u32 *)((char *)buf + buf_size);
1894 const unsigned int *reg_ranges;
1895 int reg_ranges_size, range;
1896 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
1898 /* Select the right set of register ranges to dump depending on the
1899 * adapter chip type.
1901 switch (chip_version) {
1903 reg_ranges = t5_reg_ranges;
1904 reg_ranges_size = ARRAY_SIZE(t5_reg_ranges);
1908 reg_ranges = t6_reg_ranges;
1909 reg_ranges_size = ARRAY_SIZE(t6_reg_ranges);
1914 "Unsupported chip version %d\n", chip_version);
1918 /* Clear the register buffer and insert the appropriate register
1919 * values selected by the above register ranges.
1921 memset(buf, 0, buf_size);
1922 for (range = 0; range < reg_ranges_size; range += 2) {
1923 unsigned int reg = reg_ranges[range];
1924 unsigned int last_reg = reg_ranges[range + 1];
1925 u32 *bufp = (u32 *)((char *)buf + reg);
1927 /* Iterate across the register range filling in the register
1928 * buffer but don't write past the end of the register buffer.
1930 while (reg <= last_reg && bufp < buf_end) {
1931 *bufp++ = t4_read_reg(adap, reg);
1937 /* EEPROM reads take a few tens of us while writes can take a bit over 5 ms. */
1938 #define EEPROM_DELAY 10 /* 10us per poll spin */
1939 #define EEPROM_MAX_POLL 5000 /* x 5000 == 50ms */
1941 #define EEPROM_STAT_ADDR 0x7bfc
1944 * Small utility function to wait till any outstanding VPD Access is complete.
1945 * We have a per-adapter state variable "VPD Busy" to indicate when we have a
1946 * VPD Access in flight. This allows us to handle the problem of having a
1947 * previous VPD Access time out and prevent an attempt to inject a new VPD
1948 * Request before any in-flight VPD request has completed.
1950 static int t4_seeprom_wait(struct adapter *adapter)
1952 unsigned int base = adapter->params.pci.vpd_cap_addr;
1955 /* If no VPD Access is in flight, we can just return success right
1958 if (!adapter->vpd_busy)
1961 /* Poll the VPD Capability Address/Flag register waiting for it
1962 * to indicate that the operation is complete.
1964 max_poll = EEPROM_MAX_POLL;
1968 udelay(EEPROM_DELAY);
1969 t4_os_pci_read_cfg2(adapter, base + PCI_VPD_ADDR, &val);
1971 /* If the operation is complete, mark the VPD as no longer
1972 * busy and return success.
1974 if ((val & PCI_VPD_ADDR_F) == adapter->vpd_flag) {
1975 adapter->vpd_busy = 0;
1978 } while (--max_poll);
1980 /* Failure! Note that we leave the VPD Busy status set in order to
1981 * avoid pushing a new VPD Access request into the VPD Capability till
1982 * the current operation eventually succeeds. It's a bug to issue a
1983 * new request when an existing request is in flight and will result
1984 * in corrupt hardware state.
1990 * t4_seeprom_read - read a serial EEPROM location
1991 * @adapter: adapter to read
1992 * @addr: EEPROM virtual address
1993 * @data: where to store the read data
1995 * Read a 32-bit word from a location in serial EEPROM using the card's PCI
1996 * VPD capability. Note that this function must be called with a virtual
1999 int t4_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
2001 unsigned int base = adapter->params.pci.vpd_cap_addr;
2004 /* VPD Accesses must alway be 4-byte aligned!
2006 if (addr >= EEPROMVSIZE || (addr & 3))
2009 /* Wait for any previous operation which may still be in flight to
2012 ret = t4_seeprom_wait(adapter);
2014 dev_err(adapter, "VPD still busy from previous operation\n");
2018 /* Issue our new VPD Read request, mark the VPD as being busy and wait
2019 * for our request to complete. If it doesn't complete, note the
2020 * error and return it to our caller. Note that we do not reset the
2023 t4_os_pci_write_cfg2(adapter, base + PCI_VPD_ADDR, (u16)addr);
2024 adapter->vpd_busy = 1;
2025 adapter->vpd_flag = PCI_VPD_ADDR_F;
2026 ret = t4_seeprom_wait(adapter);
2028 dev_err(adapter, "VPD read of address %#x failed\n", addr);
2032 /* Grab the returned data, swizzle it into our endianness and
2035 t4_os_pci_read_cfg4(adapter, base + PCI_VPD_DATA, data);
2036 *data = le32_to_cpu(*data);
2041 * t4_seeprom_write - write a serial EEPROM location
2042 * @adapter: adapter to write
2043 * @addr: virtual EEPROM address
2044 * @data: value to write
2046 * Write a 32-bit word to a location in serial EEPROM using the card's PCI
2047 * VPD capability. Note that this function must be called with a virtual
2050 int t4_seeprom_write(struct adapter *adapter, u32 addr, u32 data)
2052 unsigned int base = adapter->params.pci.vpd_cap_addr;
2057 /* VPD Accesses must alway be 4-byte aligned!
2059 if (addr >= EEPROMVSIZE || (addr & 3))
2062 /* Wait for any previous operation which may still be in flight to
2065 ret = t4_seeprom_wait(adapter);
2067 dev_err(adapter, "VPD still busy from previous operation\n");
2071 /* Issue our new VPD Read request, mark the VPD as being busy and wait
2072 * for our request to complete. If it doesn't complete, note the
2073 * error and return it to our caller. Note that we do not reset the
2076 t4_os_pci_write_cfg4(adapter, base + PCI_VPD_DATA,
2078 t4_os_pci_write_cfg2(adapter, base + PCI_VPD_ADDR,
2079 (u16)addr | PCI_VPD_ADDR_F);
2080 adapter->vpd_busy = 1;
2081 adapter->vpd_flag = 0;
2082 ret = t4_seeprom_wait(adapter);
2084 dev_err(adapter, "VPD write of address %#x failed\n", addr);
2088 /* Reset PCI_VPD_DATA register after a transaction and wait for our
2089 * request to complete. If it doesn't complete, return error.
2091 t4_os_pci_write_cfg4(adapter, base + PCI_VPD_DATA, 0);
2092 max_poll = EEPROM_MAX_POLL;
2094 udelay(EEPROM_DELAY);
2095 t4_seeprom_read(adapter, EEPROM_STAT_ADDR, &stats_reg);
2096 } while ((stats_reg & 0x1) && --max_poll);
2100 /* Return success! */
2105 * t4_seeprom_wp - enable/disable EEPROM write protection
2106 * @adapter: the adapter
2107 * @enable: whether to enable or disable write protection
2109 * Enables or disables write protection on the serial EEPROM.
2111 int t4_seeprom_wp(struct adapter *adapter, int enable)
2113 return t4_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0);
2117 * t4_fw_tp_pio_rw - Access TP PIO through LDST
2118 * @adap: the adapter
2119 * @vals: where the indirect register values are stored/written
2120 * @nregs: how many indirect registers to read/write
2121 * @start_idx: index of first indirect register to read/write
2122 * @rw: Read (1) or Write (0)
2124 * Access TP PIO registers through LDST
2126 void t4_fw_tp_pio_rw(struct adapter *adap, u32 *vals, unsigned int nregs,
2127 unsigned int start_index, unsigned int rw)
2129 int cmd = FW_LDST_ADDRSPC_TP_PIO;
2130 struct fw_ldst_cmd c;
2134 for (i = 0 ; i < nregs; i++) {
2135 memset(&c, 0, sizeof(c));
2136 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) |
2138 (rw ? F_FW_CMD_READ :
2140 V_FW_LDST_CMD_ADDRSPACE(cmd));
2141 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
2143 c.u.addrval.addr = cpu_to_be32(start_index + i);
2144 c.u.addrval.val = rw ? 0 : cpu_to_be32(vals[i]);
2145 ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
2148 vals[i] = be32_to_cpu(c.u.addrval.val);
2154 * t4_read_rss_key - read the global RSS key
2155 * @adap: the adapter
2156 * @key: 10-entry array holding the 320-bit RSS key
2158 * Reads the global 320-bit RSS key.
2160 void t4_read_rss_key(struct adapter *adap, u32 *key)
2162 t4_fw_tp_pio_rw(adap, key, 10, A_TP_RSS_SECRET_KEY0, 1);
2166 * t4_write_rss_key - program one of the RSS keys
2167 * @adap: the adapter
2168 * @key: 10-entry array holding the 320-bit RSS key
2169 * @idx: which RSS key to write
2171 * Writes one of the RSS keys with the given 320-bit value. If @idx is
2172 * 0..15 the corresponding entry in the RSS key table is written,
2173 * otherwise the global RSS key is written.
2175 void t4_write_rss_key(struct adapter *adap, u32 *key, int idx)
2177 u32 vrt = t4_read_reg(adap, A_TP_RSS_CONFIG_VRT);
2178 u8 rss_key_addr_cnt = 16;
2180 /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble),
2181 * allows access to key addresses 16-63 by using KeyWrAddrX
2182 * as index[5:4](upper 2) into key table
2184 if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) &&
2185 (vrt & F_KEYEXTEND) && (G_KEYMODE(vrt) == 3))
2186 rss_key_addr_cnt = 32;
2188 t4_fw_tp_pio_rw(adap, key, 10, A_TP_RSS_SECRET_KEY0, 0);
2190 if (idx >= 0 && idx < rss_key_addr_cnt) {
2191 if (rss_key_addr_cnt > 16)
2192 t4_write_reg(adap, A_TP_RSS_CONFIG_VRT,
2193 V_KEYWRADDRX(idx >> 4) |
2194 V_T6_VFWRADDR(idx) | F_KEYWREN);
2196 t4_write_reg(adap, A_TP_RSS_CONFIG_VRT,
2197 V_KEYWRADDR(idx) | F_KEYWREN);
2202 * t4_config_rss_range - configure a portion of the RSS mapping table
2203 * @adapter: the adapter
2204 * @mbox: mbox to use for the FW command
2205 * @viid: virtual interface whose RSS subtable is to be written
2206 * @start: start entry in the table to write
2207 * @n: how many table entries to write
2208 * @rspq: values for the "response queue" (Ingress Queue) lookup table
2209 * @nrspq: number of values in @rspq
2211 * Programs the selected part of the VI's RSS mapping table with the
2212 * provided values. If @nrspq < @n the supplied values are used repeatedly
2213 * until the full table range is populated.
2215 * The caller must ensure the values in @rspq are in the range allowed for
2218 int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
2219 int start, int n, const u16 *rspq, unsigned int nrspq)
2222 const u16 *rsp = rspq;
2223 const u16 *rsp_end = rspq + nrspq;
2224 struct fw_rss_ind_tbl_cmd cmd;
2226 memset(&cmd, 0, sizeof(cmd));
2227 cmd.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
2228 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
2229 V_FW_RSS_IND_TBL_CMD_VIID(viid));
2230 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
2233 * Each firmware RSS command can accommodate up to 32 RSS Ingress
2234 * Queue Identifiers. These Ingress Queue IDs are packed three to
2235 * a 32-bit word as 10-bit values with the upper remaining 2 bits
2239 int nq = min(n, 32);
2241 __be32 *qp = &cmd.iq0_to_iq2;
2244 * Set up the firmware RSS command header to send the next
2245 * "nq" Ingress Queue IDs to the firmware.
2247 cmd.niqid = cpu_to_be16(nq);
2248 cmd.startidx = cpu_to_be16(start);
2251 * "nq" more done for the start of the next loop.
2257 * While there are still Ingress Queue IDs to stuff into the
2258 * current firmware RSS command, retrieve them from the
2259 * Ingress Queue ID array and insert them into the command.
2263 * Grab up to the next 3 Ingress Queue IDs (wrapping
2264 * around the Ingress Queue ID array if necessary) and
2265 * insert them into the firmware RSS command at the
2266 * current 3-tuple position within the commad.
2270 int nqbuf = min(3, nq);
2276 while (nqbuf && nq_packed < 32) {
2283 *qp++ = cpu_to_be32(V_FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) |
2284 V_FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) |
2285 V_FW_RSS_IND_TBL_CMD_IQ2(qbuf[2]));
2289 * Send this portion of the RRS table update to the firmware;
2290 * bail out on any errors.
2292 if (is_pf4(adapter))
2293 ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd),
2296 ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
2305 * t4_config_vi_rss - configure per VI RSS settings
2306 * @adapter: the adapter
2307 * @mbox: mbox to use for the FW command
2310 * @defq: id of the default RSS queue for the VI.
2312 * Configures VI-specific RSS properties.
2314 int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
2315 unsigned int flags, unsigned int defq)
2317 struct fw_rss_vi_config_cmd c;
2319 memset(&c, 0, sizeof(c));
2320 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
2321 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
2322 V_FW_RSS_VI_CONFIG_CMD_VIID(viid));
2323 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
2324 c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags |
2325 V_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(defq));
2326 if (is_pf4(adapter))
2327 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
2329 return t4vf_wr_mbox(adapter, &c, sizeof(c), NULL);
2333 * t4_read_config_vi_rss - read the configured per VI RSS settings
2334 * @adapter: the adapter
2335 * @mbox: mbox to use for the FW command
2337 * @flags: where to place the configured flags
2338 * @defq: where to place the id of the default RSS queue for the VI.
2340 * Read configured VI-specific RSS properties.
2342 int t4_read_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
2343 u64 *flags, unsigned int *defq)
2345 struct fw_rss_vi_config_cmd c;
2346 unsigned int result;
2349 memset(&c, 0, sizeof(c));
2350 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
2351 F_FW_CMD_REQUEST | F_FW_CMD_READ |
2352 V_FW_RSS_VI_CONFIG_CMD_VIID(viid));
2353 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
2354 ret = t4_wr_mbox(adapter, mbox, &c, sizeof(c), &c);
2356 result = be32_to_cpu(c.u.basicvirtual.defaultq_to_udpen);
2358 *defq = G_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(result);
2360 *flags = result & M_FW_RSS_VI_CONFIG_CMD_DEFAULTQ;
2367 * init_cong_ctrl - initialize congestion control parameters
2368 * @a: the alpha values for congestion control
2369 * @b: the beta values for congestion control
2371 * Initialize the congestion control parameters.
2373 static void init_cong_ctrl(unsigned short *a, unsigned short *b)
2377 for (i = 0; i < 9; i++) {
2431 #define INIT_CMD(var, cmd, rd_wr) do { \
2432 (var).op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_##cmd##_CMD) | \
2433 F_FW_CMD_REQUEST | F_FW_CMD_##rd_wr); \
2434 (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \
2437 int t4_get_core_clock(struct adapter *adapter, struct vpd_params *p)
2439 u32 cclk_param, cclk_val;
2443 * Ask firmware for the Core Clock since it knows how to translate the
2444 * Reference Clock ('V2') VPD field into a Core Clock value ...
2446 cclk_param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
2447 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
2448 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
2449 1, &cclk_param, &cclk_val);
2451 dev_err(adapter, "%s: error in fetching from coreclock - %d\n",
2457 dev_debug(adapter, "%s: p->cclk = %u\n", __func__, p->cclk);
2462 * t4_get_pfres - retrieve VF resource limits
2463 * @adapter: the adapter
2465 * Retrieves configured resource limits and capabilities for a physical
2466 * function. The results are stored in @adapter->pfres.
2468 int t4_get_pfres(struct adapter *adapter)
2470 struct pf_resources *pfres = &adapter->params.pfres;
2471 struct fw_pfvf_cmd cmd, rpl;
2476 * Execute PFVF Read command to get VF resource limits; bail out early
2477 * with error on command failure.
2479 memset(&cmd, 0, sizeof(cmd));
2480 cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) |
2483 V_FW_PFVF_CMD_PFN(adapter->pf) |
2484 V_FW_PFVF_CMD_VFN(0));
2485 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
2486 v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
2487 if (v != FW_SUCCESS)
2491 * Extract PF resource limits and return success.
2493 word = be32_to_cpu(rpl.niqflint_niq);
2494 pfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word);
2496 word = be32_to_cpu(rpl.type_to_neq);
2497 pfres->neq = G_FW_PFVF_CMD_NEQ(word);
2499 word = be32_to_cpu(rpl.r_caps_to_nethctrl);
2500 pfres->nethctrl = G_FW_PFVF_CMD_NETHCTRL(word);
2505 /* serial flash and firmware constants and flash config file constants */
2507 SF_ATTEMPTS = 10, /* max retries for SF operations */
2509 /* flash command opcodes */
2510 SF_PROG_PAGE = 2, /* program page */
2511 SF_WR_DISABLE = 4, /* disable writes */
2512 SF_RD_STATUS = 5, /* read status register */
2513 SF_WR_ENABLE = 6, /* enable writes */
2514 SF_RD_DATA_FAST = 0xb, /* read flash */
2515 SF_RD_ID = 0x9f, /* read ID */
2516 SF_ERASE_SECTOR = 0xd8, /* erase sector */
2520 * sf1_read - read data from the serial flash
2521 * @adapter: the adapter
2522 * @byte_cnt: number of bytes to read
2523 * @cont: whether another operation will be chained
2524 * @lock: whether to lock SF for PL access only
2525 * @valp: where to store the read data
2527 * Reads up to 4 bytes of data from the serial flash. The location of
2528 * the read needs to be specified prior to calling this by issuing the
2529 * appropriate commands to the serial flash.
2531 static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
2532 int lock, u32 *valp)
2536 if (!byte_cnt || byte_cnt > 4)
2538 if (t4_read_reg(adapter, A_SF_OP) & F_BUSY)
2540 t4_write_reg(adapter, A_SF_OP,
2541 V_SF_LOCK(lock) | V_CONT(cont) | V_BYTECNT(byte_cnt - 1));
2542 ret = t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5);
2544 *valp = t4_read_reg(adapter, A_SF_DATA);
2549 * sf1_write - write data to the serial flash
2550 * @adapter: the adapter
2551 * @byte_cnt: number of bytes to write
2552 * @cont: whether another operation will be chained
2553 * @lock: whether to lock SF for PL access only
2554 * @val: value to write
2556 * Writes up to 4 bytes of data to the serial flash. The location of
2557 * the write needs to be specified prior to calling this by issuing the
2558 * appropriate commands to the serial flash.
2560 static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
2563 if (!byte_cnt || byte_cnt > 4)
2565 if (t4_read_reg(adapter, A_SF_OP) & F_BUSY)
2567 t4_write_reg(adapter, A_SF_DATA, val);
2568 t4_write_reg(adapter, A_SF_OP, V_SF_LOCK(lock) |
2569 V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1));
2570 return t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5);
2574 * t4_read_flash - read words from serial flash
2575 * @adapter: the adapter
2576 * @addr: the start address for the read
2577 * @nwords: how many 32-bit words to read
2578 * @data: where to store the read data
2579 * @byte_oriented: whether to store data as bytes or as words
2581 * Read the specified number of 32-bit words from the serial flash.
2582 * If @byte_oriented is set the read data is stored as a byte array
2583 * (i.e., big-endian), otherwise as 32-bit words in the platform's
2584 * natural endianness.
2586 int t4_read_flash(struct adapter *adapter, unsigned int addr,
2587 unsigned int nwords, u32 *data, int byte_oriented)
2591 if (((addr + nwords * sizeof(u32)) > adapter->params.sf_size) ||
2595 addr = rte_constant_bswap32(addr) | SF_RD_DATA_FAST;
2597 ret = sf1_write(adapter, 4, 1, 0, addr);
2601 ret = sf1_read(adapter, 1, 1, 0, data);
2605 for ( ; nwords; nwords--, data++) {
2606 ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
2608 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */
2612 *data = cpu_to_be32(*data);
2618 * t4_get_exprom_version - return the Expansion ROM version (if any)
2619 * @adapter: the adapter
2620 * @vers: where to place the version
2622 * Reads the Expansion ROM header from FLASH and returns the version
2623 * number (if present) through the @vers return value pointer. We return
2624 * this in the Firmware Version Format since it's convenient. Return
2625 * 0 on success, -ENOENT if no Expansion ROM is present.
2627 static int t4_get_exprom_version(struct adapter *adapter, u32 *vers)
2629 struct exprom_header {
2630 unsigned char hdr_arr[16]; /* must start with 0x55aa */
2631 unsigned char hdr_ver[4]; /* Expansion ROM version */
2633 u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header),
2637 ret = t4_read_flash(adapter, FLASH_EXP_ROM_START,
2638 ARRAY_SIZE(exprom_header_buf),
2639 exprom_header_buf, 0);
2643 hdr = (struct exprom_header *)exprom_header_buf;
2644 if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa)
2647 *vers = (V_FW_HDR_FW_VER_MAJOR(hdr->hdr_ver[0]) |
2648 V_FW_HDR_FW_VER_MINOR(hdr->hdr_ver[1]) |
2649 V_FW_HDR_FW_VER_MICRO(hdr->hdr_ver[2]) |
2650 V_FW_HDR_FW_VER_BUILD(hdr->hdr_ver[3]));
2655 * t4_get_fw_version - read the firmware version
2656 * @adapter: the adapter
2657 * @vers: where to place the version
2659 * Reads the FW version from flash.
2661 static int t4_get_fw_version(struct adapter *adapter, u32 *vers)
2663 return t4_read_flash(adapter, FLASH_FW_START +
2664 offsetof(struct fw_hdr, fw_ver), 1, vers, 0);
2668 * t4_get_bs_version - read the firmware bootstrap version
2669 * @adapter: the adapter
2670 * @vers: where to place the version
2672 * Reads the FW Bootstrap version from flash.
2674 static int t4_get_bs_version(struct adapter *adapter, u32 *vers)
2676 return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START +
2677 offsetof(struct fw_hdr, fw_ver), 1,
2682 * t4_get_tp_version - read the TP microcode version
2683 * @adapter: the adapter
2684 * @vers: where to place the version
2686 * Reads the TP microcode version from flash.
2688 static int t4_get_tp_version(struct adapter *adapter, u32 *vers)
2690 return t4_read_flash(adapter, FLASH_FW_START +
2691 offsetof(struct fw_hdr, tp_microcode_ver),
2696 * t4_get_version_info - extract various chip/firmware version information
2697 * @adapter: the adapter
2699 * Reads various chip/firmware version numbers and stores them into the
2700 * adapter Adapter Parameters structure. If any of the efforts fails
2701 * the first failure will be returned, but all of the version numbers
2704 int t4_get_version_info(struct adapter *adapter)
2708 #define FIRST_RET(__getvinfo) \
2710 int __ret = __getvinfo; \
2711 if (__ret && !ret) \
2715 FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
2716 FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
2717 FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
2718 FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
2726 * t4_dump_version_info - dump all of the adapter configuration IDs
2727 * @adapter: the adapter
2729 * Dumps all of the various bits of adapter configuration version/revision
2730 * IDs information. This is typically called at some point after
2731 * t4_get_version_info() has been called.
2733 void t4_dump_version_info(struct adapter *adapter)
2736 * Device information.
2738 dev_info(adapter, "Chelsio rev %d\n",
2739 CHELSIO_CHIP_RELEASE(adapter->params.chip));
2744 if (!adapter->params.fw_vers)
2745 dev_warn(adapter, "No firmware loaded\n");
2747 dev_info(adapter, "Firmware version: %u.%u.%u.%u\n",
2748 G_FW_HDR_FW_VER_MAJOR(adapter->params.fw_vers),
2749 G_FW_HDR_FW_VER_MINOR(adapter->params.fw_vers),
2750 G_FW_HDR_FW_VER_MICRO(adapter->params.fw_vers),
2751 G_FW_HDR_FW_VER_BUILD(adapter->params.fw_vers));
2754 * Bootstrap Firmware Version.
2756 if (!adapter->params.bs_vers)
2757 dev_warn(adapter, "No bootstrap loaded\n");
2759 dev_info(adapter, "Bootstrap version: %u.%u.%u.%u\n",
2760 G_FW_HDR_FW_VER_MAJOR(adapter->params.bs_vers),
2761 G_FW_HDR_FW_VER_MINOR(adapter->params.bs_vers),
2762 G_FW_HDR_FW_VER_MICRO(adapter->params.bs_vers),
2763 G_FW_HDR_FW_VER_BUILD(adapter->params.bs_vers));
2766 * TP Microcode Version.
2768 if (!adapter->params.tp_vers)
2769 dev_warn(adapter, "No TP Microcode loaded\n");
2771 dev_info(adapter, "TP Microcode version: %u.%u.%u.%u\n",
2772 G_FW_HDR_FW_VER_MAJOR(adapter->params.tp_vers),
2773 G_FW_HDR_FW_VER_MINOR(adapter->params.tp_vers),
2774 G_FW_HDR_FW_VER_MICRO(adapter->params.tp_vers),
2775 G_FW_HDR_FW_VER_BUILD(adapter->params.tp_vers));
2778 * Expansion ROM version.
2780 if (!adapter->params.er_vers)
2781 dev_info(adapter, "No Expansion ROM loaded\n");
2783 dev_info(adapter, "Expansion ROM version: %u.%u.%u.%u\n",
2784 G_FW_HDR_FW_VER_MAJOR(adapter->params.er_vers),
2785 G_FW_HDR_FW_VER_MINOR(adapter->params.er_vers),
2786 G_FW_HDR_FW_VER_MICRO(adapter->params.er_vers),
2787 G_FW_HDR_FW_VER_BUILD(adapter->params.er_vers));
2791 * t4_link_l1cfg_core - apply link configuration to MAC/PHY
2792 * @pi: the port info
2793 * @caps: link capabilities to configure
2794 * @sleep_ok: if true we may sleep while awaiting command completion
2796 * Set up a port's MAC and PHY according to a desired link configuration.
2797 * - If the PHY can auto-negotiate first decide what to advertise, then
2798 * enable/disable auto-negotiation as desired, and reset.
2799 * - If the PHY does not auto-negotiate just reset it.
2800 * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
2801 * otherwise do it later based on the outcome of auto-negotiation.
2803 int t4_link_l1cfg_core(struct port_info *pi, u32 caps, u8 sleep_ok)
2805 struct link_config *lc = &pi->link_cfg;
2806 struct adapter *adap = pi->adapter;
2807 struct fw_port_cmd cmd;
2810 memset(&cmd, 0, sizeof(cmd));
2811 cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
2812 F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
2813 V_FW_PORT_CMD_PORTID(pi->port_id));
2814 cmd.action_to_len16 =
2815 cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG32) |
2818 cmd.u.l1cfg32.rcap32 = cpu_to_be32(caps);
2821 ret = t4_wr_mbox(adap, adap->mbox, &cmd, sizeof(cmd), NULL);
2823 ret = t4_wr_mbox_ns(adap, adap->mbox, &cmd, sizeof(cmd), NULL);
2825 if (ret == FW_SUCCESS)
2826 lc->link_caps = caps;
2829 "Requested Port Capabilities %#x rejected, error %d\n",
2836 * t4_flash_cfg_addr - return the address of the flash configuration file
2837 * @adapter: the adapter
2839 * Return the address within the flash where the Firmware Configuration
2840 * File is stored, or an error if the device FLASH is too small to contain
2841 * a Firmware Configuration File.
2843 int t4_flash_cfg_addr(struct adapter *adapter)
2846 * If the device FLASH isn't large enough to hold a Firmware
2847 * Configuration File, return an error.
2849 if (adapter->params.sf_size < FLASH_CFG_START + FLASH_CFG_MAX_SIZE)
2852 return FLASH_CFG_START;
2855 #define PF_INTR_MASK (F_PFSW | F_PFCIM)
2858 * t4_intr_enable - enable interrupts
2859 * @adapter: the adapter whose interrupts should be enabled
2861 * Enable PF-specific interrupts for the calling function and the top-level
2862 * interrupt concentrator for global interrupts. Interrupts are already
2863 * enabled at each module, here we just enable the roots of the interrupt
2866 * Note: this function should be called only when the driver manages
2867 * non PF-specific interrupts from the various HW modules. Only one PCI
2868 * function at a time should be doing this.
2870 void t4_intr_enable(struct adapter *adapter)
2873 u32 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
2874 u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
2875 G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
2877 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
2878 val = F_ERR_DROPPED_DB | F_ERR_EGR_CTXT_PRIO | F_DBFIFO_HP_INT;
2879 t4_write_reg(adapter, A_SGE_INT_ENABLE3, F_ERR_CPL_EXCEED_IQE_SIZE |
2880 F_ERR_INVALID_CIDX_INC | F_ERR_CPL_OPCODE_0 |
2881 F_ERR_DATA_CPL_ON_HIGH_QID1 | F_INGRESS_SIZE_ERR |
2882 F_ERR_DATA_CPL_ON_HIGH_QID0 | F_ERR_BAD_DB_PIDX3 |
2883 F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 |
2884 F_ERR_BAD_DB_PIDX0 | F_ERR_ING_CTXT_PRIO |
2885 F_DBFIFO_LP_INT | F_EGRESS_SIZE_ERR | val);
2886 t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), PF_INTR_MASK);
2887 t4_set_reg_field(adapter, A_PL_INT_MAP0, 0, 1 << pf);
2891 * t4_intr_disable - disable interrupts
2892 * @adapter: the adapter whose interrupts should be disabled
2894 * Disable interrupts. We only disable the top-level interrupt
2895 * concentrators. The caller must be a PCI function managing global
2898 void t4_intr_disable(struct adapter *adapter)
2900 u32 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
2901 u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
2902 G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
2904 t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), 0);
2905 t4_set_reg_field(adapter, A_PL_INT_MAP0, 1 << pf, 0);
2909 * t4_get_port_type_description - return Port Type string description
2910 * @port_type: firmware Port Type enumeration
2912 const char *t4_get_port_type_description(enum fw_port_type port_type)
2914 static const char * const port_type_description[] = {
2939 if (port_type < ARRAY_SIZE(port_type_description))
2940 return port_type_description[port_type];
2945 * t4_get_mps_bg_map - return the buffer groups associated with a port
2946 * @adap: the adapter
2947 * @pidx: the port index
2949 * Returns a bitmap indicating which MPS buffer groups are associated
2950 * with the given port. Bit i is set if buffer group i is used by the
2953 unsigned int t4_get_mps_bg_map(struct adapter *adap, unsigned int pidx)
2955 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
2956 unsigned int nports = 1 << G_NUMPORTS(t4_read_reg(adap,
2959 if (pidx >= nports) {
2960 dev_warn(adap, "MPS Port Index %d >= Nports %d\n",
2965 switch (chip_version) {
2970 case 2: return 3 << (2 * pidx);
2971 case 4: return 1 << pidx;
2977 case 2: return 1 << (2 * pidx);
2982 dev_err(adap, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
2983 chip_version, nports);
2988 * t4_get_tp_ch_map - return TP ingress channels associated with a port
2989 * @adapter: the adapter
2990 * @pidx: the port index
2992 * Returns a bitmap indicating which TP Ingress Channels are associated with
2993 * a given Port. Bit i is set if TP Ingress Channel i is used by the Port.
2995 unsigned int t4_get_tp_ch_map(struct adapter *adapter, unsigned int pidx)
2997 unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
2998 unsigned int nports = 1 << G_NUMPORTS(t4_read_reg(adapter,
3001 if (pidx >= nports) {
3002 dev_warn(adap, "TP Port Index %d >= Nports %d\n",
3007 switch (chip_version) {
3010 /* Note that this happens to be the same values as the MPS
3011 * Buffer Group Map for these Chips. But we replicate the code
3012 * here because they're really separate concepts.
3016 case 2: return 3 << (2 * pidx);
3017 case 4: return 1 << pidx;
3023 case 2: return 1 << pidx;
3028 dev_err(adapter, "Need TP Channel Map for Chip %0x, Nports %d\n",
3029 chip_version, nports);
3034 * t4_get_port_stats - collect port statistics
3035 * @adap: the adapter
3036 * @idx: the port index
3037 * @p: the stats structure to fill
3039 * Collect statistics related to the given port from HW.
3041 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
3043 u32 bgmap = t4_get_mps_bg_map(adap, idx);
3044 u32 stat_ctl = t4_read_reg(adap, A_MPS_STAT_CTL);
3046 #define GET_STAT(name) \
3047 t4_read_reg64(adap, \
3048 (is_t4(adap->params.chip) ? \
3049 PORT_REG(idx, A_MPS_PORT_STAT_##name##_L) :\
3050 T5_PORT_REG(idx, A_MPS_PORT_STAT_##name##_L)))
3051 #define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L)
3053 p->tx_octets = GET_STAT(TX_PORT_BYTES);
3054 p->tx_frames = GET_STAT(TX_PORT_FRAMES);
3055 p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST);
3056 p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST);
3057 p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST);
3058 p->tx_error_frames = GET_STAT(TX_PORT_ERROR);
3059 p->tx_frames_64 = GET_STAT(TX_PORT_64B);
3060 p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B);
3061 p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B);
3062 p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B);
3063 p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B);
3064 p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
3065 p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX);
3066 p->tx_drop = GET_STAT(TX_PORT_DROP);
3067 p->tx_pause = GET_STAT(TX_PORT_PAUSE);
3068 p->tx_ppp0 = GET_STAT(TX_PORT_PPP0);
3069 p->tx_ppp1 = GET_STAT(TX_PORT_PPP1);
3070 p->tx_ppp2 = GET_STAT(TX_PORT_PPP2);
3071 p->tx_ppp3 = GET_STAT(TX_PORT_PPP3);
3072 p->tx_ppp4 = GET_STAT(TX_PORT_PPP4);
3073 p->tx_ppp5 = GET_STAT(TX_PORT_PPP5);
3074 p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
3075 p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
3077 if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
3078 if (stat_ctl & F_COUNTPAUSESTATTX) {
3079 p->tx_frames -= p->tx_pause;
3080 p->tx_octets -= p->tx_pause * 64;
3082 if (stat_ctl & F_COUNTPAUSEMCTX)
3083 p->tx_mcast_frames -= p->tx_pause;
3086 p->rx_octets = GET_STAT(RX_PORT_BYTES);
3087 p->rx_frames = GET_STAT(RX_PORT_FRAMES);
3088 p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
3089 p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST);
3090 p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST);
3091 p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR);
3092 p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR);
3093 p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR);
3094 p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR);
3095 p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR);
3096 p->rx_runt = GET_STAT(RX_PORT_LESS_64B);
3097 p->rx_frames_64 = GET_STAT(RX_PORT_64B);
3098 p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B);
3099 p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B);
3100 p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B);
3101 p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B);
3102 p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
3103 p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX);
3104 p->rx_pause = GET_STAT(RX_PORT_PAUSE);
3105 p->rx_ppp0 = GET_STAT(RX_PORT_PPP0);
3106 p->rx_ppp1 = GET_STAT(RX_PORT_PPP1);
3107 p->rx_ppp2 = GET_STAT(RX_PORT_PPP2);
3108 p->rx_ppp3 = GET_STAT(RX_PORT_PPP3);
3109 p->rx_ppp4 = GET_STAT(RX_PORT_PPP4);
3110 p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
3111 p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
3112 p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
3114 if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
3115 if (stat_ctl & F_COUNTPAUSESTATRX) {
3116 p->rx_frames -= p->rx_pause;
3117 p->rx_octets -= p->rx_pause * 64;
3119 if (stat_ctl & F_COUNTPAUSEMCRX)
3120 p->rx_mcast_frames -= p->rx_pause;
3123 p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
3124 p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
3125 p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
3126 p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
3127 p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
3128 p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
3129 p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
3130 p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
3137 * t4_get_port_stats_offset - collect port stats relative to a previous snapshot
3138 * @adap: The adapter
3140 * @stats: Current stats to fill
3141 * @offset: Previous stats snapshot
3143 void t4_get_port_stats_offset(struct adapter *adap, int idx,
3144 struct port_stats *stats,
3145 struct port_stats *offset)
3150 t4_get_port_stats(adap, idx, stats);
3151 for (i = 0, s = (u64 *)stats, o = (u64 *)offset;
3152 i < (sizeof(struct port_stats) / sizeof(u64));
3158 * t4_clr_port_stats - clear port statistics
3159 * @adap: the adapter
3160 * @idx: the port index
3162 * Clear HW statistics for the given port.
3164 void t4_clr_port_stats(struct adapter *adap, int idx)
3167 u32 bgmap = t4_get_mps_bg_map(adap, idx);
3170 if (is_t4(adap->params.chip))
3171 port_base_addr = PORT_BASE(idx);
3173 port_base_addr = T5_PORT_BASE(idx);
3175 for (i = A_MPS_PORT_STAT_TX_PORT_BYTES_L;
3176 i <= A_MPS_PORT_STAT_TX_PORT_PPP7_H; i += 8)
3177 t4_write_reg(adap, port_base_addr + i, 0);
3178 for (i = A_MPS_PORT_STAT_RX_PORT_BYTES_L;
3179 i <= A_MPS_PORT_STAT_RX_PORT_LESS_64B_H; i += 8)
3180 t4_write_reg(adap, port_base_addr + i, 0);
3181 for (i = 0; i < 4; i++)
3182 if (bgmap & (1 << i)) {
3184 A_MPS_STAT_RX_BG_0_MAC_DROP_FRAME_L +
3187 A_MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_L +
3193 * t4_fw_hello - establish communication with FW
3194 * @adap: the adapter
3195 * @mbox: mailbox to use for the FW command
3196 * @evt_mbox: mailbox to receive async FW events
3197 * @master: specifies the caller's willingness to be the device master
3198 * @state: returns the current device state (if non-NULL)
3200 * Issues a command to establish communication with FW. Returns either
3201 * an error (negative integer) or the mailbox of the Master PF.
3203 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
3204 enum dev_master master, enum dev_state *state)
3207 struct fw_hello_cmd c;
3209 unsigned int master_mbox;
3210 int retries = FW_CMD_HELLO_RETRIES;
3213 memset(&c, 0, sizeof(c));
3214 INIT_CMD(c, HELLO, WRITE);
3215 c.err_to_clearinit = cpu_to_be32(
3216 V_FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) |
3217 V_FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) |
3218 V_FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox :
3219 M_FW_HELLO_CMD_MBMASTER) |
3220 V_FW_HELLO_CMD_MBASYNCNOT(evt_mbox) |
3221 V_FW_HELLO_CMD_STAGE(FW_HELLO_CMD_STAGE_OS) |
3222 F_FW_HELLO_CMD_CLEARINIT);
3225 * Issue the HELLO command to the firmware. If it's not successful
3226 * but indicates that we got a "busy" or "timeout" condition, retry
3227 * the HELLO until we exhaust our retry limit. If we do exceed our
3228 * retry limit, check to see if the firmware left us any error
3229 * information and report that if so ...
3231 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
3232 if (ret != FW_SUCCESS) {
3233 if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
3235 if (t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_ERR)
3236 t4_report_fw_error(adap);
3240 v = be32_to_cpu(c.err_to_clearinit);
3241 master_mbox = G_FW_HELLO_CMD_MBMASTER(v);
3243 if (v & F_FW_HELLO_CMD_ERR)
3244 *state = DEV_STATE_ERR;
3245 else if (v & F_FW_HELLO_CMD_INIT)
3246 *state = DEV_STATE_INIT;
3248 *state = DEV_STATE_UNINIT;
3252 * If we're not the Master PF then we need to wait around for the
3253 * Master PF Driver to finish setting up the adapter.
3255 * Note that we also do this wait if we're a non-Master-capable PF and
3256 * there is no current Master PF; a Master PF may show up momentarily
3257 * and we wouldn't want to fail pointlessly. (This can happen when an
3258 * OS loads lots of different drivers rapidly at the same time). In
3259 * this case, the Master PF returned by the firmware will be
3260 * M_PCIE_FW_MASTER so the test below will work ...
3262 if ((v & (F_FW_HELLO_CMD_ERR | F_FW_HELLO_CMD_INIT)) == 0 &&
3263 master_mbox != mbox) {
3264 int waiting = FW_CMD_HELLO_TIMEOUT;
3267 * Wait for the firmware to either indicate an error or
3268 * initialized state. If we see either of these we bail out
3269 * and report the issue to the caller. If we exhaust the
3270 * "hello timeout" and we haven't exhausted our retries, try
3271 * again. Otherwise bail with a timeout error.
3280 * If neither Error nor Initialialized are indicated
3281 * by the firmware keep waiting till we exaust our
3282 * timeout ... and then retry if we haven't exhausted
3285 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
3286 if (!(pcie_fw & (F_PCIE_FW_ERR | F_PCIE_FW_INIT))) {
3297 * We either have an Error or Initialized condition
3298 * report errors preferentially.
3301 if (pcie_fw & F_PCIE_FW_ERR)
3302 *state = DEV_STATE_ERR;
3303 else if (pcie_fw & F_PCIE_FW_INIT)
3304 *state = DEV_STATE_INIT;
3308 * If we arrived before a Master PF was selected and
3309 * there's not a valid Master PF, grab its identity
3312 if (master_mbox == M_PCIE_FW_MASTER &&
3313 (pcie_fw & F_PCIE_FW_MASTER_VLD))
3314 master_mbox = G_PCIE_FW_MASTER(pcie_fw);
3323 * t4_fw_bye - end communication with FW
3324 * @adap: the adapter
3325 * @mbox: mailbox to use for the FW command
3327 * Issues a command to terminate communication with FW.
3329 int t4_fw_bye(struct adapter *adap, unsigned int mbox)
3331 struct fw_bye_cmd c;
3333 memset(&c, 0, sizeof(c));
3334 INIT_CMD(c, BYE, WRITE);
3335 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3339 * t4_fw_reset - issue a reset to FW
3340 * @adap: the adapter
3341 * @mbox: mailbox to use for the FW command
3342 * @reset: specifies the type of reset to perform
3344 * Issues a reset command of the specified type to FW.
3346 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
3348 struct fw_reset_cmd c;
3350 memset(&c, 0, sizeof(c));
3351 INIT_CMD(c, RESET, WRITE);
3352 c.val = cpu_to_be32(reset);
3353 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3357 * t4_fw_halt - issue a reset/halt to FW and put uP into RESET
3358 * @adap: the adapter
3359 * @mbox: mailbox to use for the FW RESET command (if desired)
3360 * @force: force uP into RESET even if FW RESET command fails
3362 * Issues a RESET command to firmware (if desired) with a HALT indication
3363 * and then puts the microprocessor into RESET state. The RESET command
3364 * will only be issued if a legitimate mailbox is provided (mbox <=
3365 * M_PCIE_FW_MASTER).
3367 * This is generally used in order for the host to safely manipulate the
3368 * adapter without fear of conflicting with whatever the firmware might
3369 * be doing. The only way out of this state is to RESTART the firmware
3372 int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
3377 * If a legitimate mailbox is provided, issue a RESET command
3378 * with a HALT indication.
3380 if (mbox <= M_PCIE_FW_MASTER) {
3381 struct fw_reset_cmd c;
3383 memset(&c, 0, sizeof(c));
3384 INIT_CMD(c, RESET, WRITE);
3385 c.val = cpu_to_be32(F_PIORST | F_PIORSTMODE);
3386 c.halt_pkd = cpu_to_be32(F_FW_RESET_CMD_HALT);
3387 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3391 * Normally we won't complete the operation if the firmware RESET
3392 * command fails but if our caller insists we'll go ahead and put the
3393 * uP into RESET. This can be useful if the firmware is hung or even
3394 * missing ... We'll have to take the risk of putting the uP into
3395 * RESET without the cooperation of firmware in that case.
3397 * We also force the firmware's HALT flag to be on in case we bypassed
3398 * the firmware RESET command above or we're dealing with old firmware
3399 * which doesn't have the HALT capability. This will serve as a flag
3400 * for the incoming firmware to know that it's coming out of a HALT
3401 * rather than a RESET ... if it's new enough to understand that ...
3403 if (ret == 0 || force) {
3404 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, F_UPCRST);
3405 t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT,
3410 * And we always return the result of the firmware RESET command
3411 * even when we force the uP into RESET ...
3417 * t4_fw_restart - restart the firmware by taking the uP out of RESET
3418 * @adap: the adapter
3419 * @mbox: mailbox to use for the FW RESET command (if desired)
3420 * @reset: if we want to do a RESET to restart things
3422 * Restart firmware previously halted by t4_fw_halt(). On successful
3423 * return the previous PF Master remains as the new PF Master and there
3424 * is no need to issue a new HELLO command, etc.
3426 * We do this in two ways:
3428 * 1. If we're dealing with newer firmware we'll simply want to take
3429 * the chip's microprocessor out of RESET. This will cause the
3430 * firmware to start up from its start vector. And then we'll loop
3431 * until the firmware indicates it's started again (PCIE_FW.HALT
3432 * reset to 0) or we timeout.
3434 * 2. If we're dealing with older firmware then we'll need to RESET
3435 * the chip since older firmware won't recognize the PCIE_FW.HALT
3436 * flag and automatically RESET itself on startup.
3438 int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
3442 * Since we're directing the RESET instead of the firmware
3443 * doing it automatically, we need to clear the PCIE_FW.HALT
3446 t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT, 0);
3449 * If we've been given a valid mailbox, first try to get the
3450 * firmware to do the RESET. If that works, great and we can
3451 * return success. Otherwise, if we haven't been given a
3452 * valid mailbox or the RESET command failed, fall back to
3453 * hitting the chip with a hammer.
3455 if (mbox <= M_PCIE_FW_MASTER) {
3456 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0);
3458 if (t4_fw_reset(adap, mbox,
3459 F_PIORST | F_PIORSTMODE) == 0)
3463 t4_write_reg(adap, A_PL_RST, F_PIORST | F_PIORSTMODE);
3468 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0);
3469 for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
3470 if (!(t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_HALT))
3481 * t4_fixup_host_params_compat - fix up host-dependent parameters
3482 * @adap: the adapter
3483 * @page_size: the host's Base Page Size
3484 * @cache_line_size: the host's Cache Line Size
3485 * @chip_compat: maintain compatibility with designated chip
3487 * Various registers in the chip contain values which are dependent on the
3488 * host's Base Page and Cache Line Sizes. This function will fix all of
3489 * those registers with the appropriate values as passed in ...
3491 * @chip_compat is used to limit the set of changes that are made
3492 * to be compatible with the indicated chip release. This is used by
3493 * drivers to maintain compatibility with chip register settings when
3494 * the drivers haven't [yet] been updated with new chip support.
3496 int t4_fixup_host_params_compat(struct adapter *adap,
3497 unsigned int page_size,
3498 unsigned int cache_line_size,
3499 enum chip_type chip_compat)
3501 unsigned int page_shift = cxgbe_fls(page_size) - 1;
3502 unsigned int sge_hps = page_shift - 10;
3503 unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
3504 unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
3505 unsigned int fl_align_log = cxgbe_fls(fl_align) - 1;
3507 t4_write_reg(adap, A_SGE_HOST_PAGE_SIZE,
3508 V_HOSTPAGESIZEPF0(sge_hps) |
3509 V_HOSTPAGESIZEPF1(sge_hps) |
3510 V_HOSTPAGESIZEPF2(sge_hps) |
3511 V_HOSTPAGESIZEPF3(sge_hps) |
3512 V_HOSTPAGESIZEPF4(sge_hps) |
3513 V_HOSTPAGESIZEPF5(sge_hps) |
3514 V_HOSTPAGESIZEPF6(sge_hps) |
3515 V_HOSTPAGESIZEPF7(sge_hps));
3517 if (is_t4(adap->params.chip) || is_t4(chip_compat))
3518 t4_set_reg_field(adap, A_SGE_CONTROL,
3519 V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
3520 F_EGRSTATUSPAGESIZE,
3521 V_INGPADBOUNDARY(fl_align_log -
3522 X_INGPADBOUNDARY_SHIFT) |
3523 V_EGRSTATUSPAGESIZE(stat_len != 64));
3525 unsigned int pack_align;
3526 unsigned int ingpad, ingpack;
3527 unsigned int pcie_cap;
3530 * T5 introduced the separation of the Free List Padding and
3531 * Packing Boundaries. Thus, we can select a smaller Padding
3532 * Boundary to avoid uselessly chewing up PCIe Link and Memory
3533 * Bandwidth, and use a Packing Boundary which is large enough
3534 * to avoid false sharing between CPUs, etc.
3536 * For the PCI Link, the smaller the Padding Boundary the
3537 * better. For the Memory Controller, a smaller Padding
3538 * Boundary is better until we cross under the Memory Line
3539 * Size (the minimum unit of transfer to/from Memory). If we
3540 * have a Padding Boundary which is smaller than the Memory
3541 * Line Size, that'll involve a Read-Modify-Write cycle on the
3542 * Memory Controller which is never good.
3545 /* We want the Packing Boundary to be based on the Cache Line
3546 * Size in order to help avoid False Sharing performance
3547 * issues between CPUs, etc. We also want the Packing
3548 * Boundary to incorporate the PCI-E Maximum Payload Size. We
3549 * get best performance when the Packing Boundary is a
3550 * multiple of the Maximum Payload Size.
3552 pack_align = fl_align;
3553 pcie_cap = t4_os_find_pci_capability(adap, PCI_CAP_ID_EXP);
3555 unsigned int mps, mps_log;
3558 /* The PCIe Device Control Maximum Payload Size field
3559 * [bits 7:5] encodes sizes as powers of 2 starting at
3562 t4_os_pci_read_cfg2(adap, pcie_cap + PCI_EXP_DEVCTL,
3564 mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
3566 if (mps > pack_align)
3571 * N.B. T5 has a different interpretation of the "0" value for
3572 * the Packing Boundary. This corresponds to 16 bytes instead
3573 * of the expected 32 bytes. We never have a Packing Boundary
3574 * less than 32 bytes so we can't use that special value but
3575 * on the other hand, if we wanted 32 bytes, the best we can
3576 * really do is 64 bytes ...
3578 if (pack_align <= 16) {
3579 ingpack = X_INGPACKBOUNDARY_16B;
3581 } else if (pack_align == 32) {
3582 ingpack = X_INGPACKBOUNDARY_64B;
3585 unsigned int pack_align_log = cxgbe_fls(pack_align) - 1;
3587 ingpack = pack_align_log - X_INGPACKBOUNDARY_SHIFT;
3588 fl_align = pack_align;
3591 /* Use the smallest Ingress Padding which isn't smaller than
3592 * the Memory Controller Read/Write Size. We'll take that as
3593 * being 8 bytes since we don't know of any system with a
3594 * wider Memory Controller Bus Width.
3596 if (is_t5(adap->params.chip))
3597 ingpad = X_INGPADBOUNDARY_32B;
3599 ingpad = X_T6_INGPADBOUNDARY_8B;
3600 t4_set_reg_field(adap, A_SGE_CONTROL,
3601 V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
3602 F_EGRSTATUSPAGESIZE,
3603 V_INGPADBOUNDARY(ingpad) |
3604 V_EGRSTATUSPAGESIZE(stat_len != 64));
3605 t4_set_reg_field(adap, A_SGE_CONTROL2,
3606 V_INGPACKBOUNDARY(M_INGPACKBOUNDARY),
3607 V_INGPACKBOUNDARY(ingpack));
3611 * Adjust various SGE Free List Host Buffer Sizes.
3613 * The first four entries are:
3617 * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
3618 * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
3620 * For the single-MTU buffers in unpacked mode we need to include
3621 * space for the SGE Control Packet Shift, 14 byte Ethernet header,
3622 * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
3623 * Padding boundary. All of these are accommodated in the Factory
3624 * Default Firmware Configuration File but we need to adjust it for
3625 * this host's cache line size.
3627 t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE0, page_size);
3628 t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE2,
3629 (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE2) + fl_align - 1)
3631 t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE3,
3632 (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE3) + fl_align - 1)
3635 t4_write_reg(adap, A_ULP_RX_TDDP_PSZ, V_HPZ0(page_shift - 12));
3641 * t4_fixup_host_params - fix up host-dependent parameters (T4 compatible)
3642 * @adap: the adapter
3643 * @page_size: the host's Base Page Size
3644 * @cache_line_size: the host's Cache Line Size
3646 * Various registers in T4 contain values which are dependent on the
3647 * host's Base Page and Cache Line Sizes. This function will fix all of
3648 * those registers with the appropriate values as passed in ...
3650 * This routine makes changes which are compatible with T4 chips.
3652 int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
3653 unsigned int cache_line_size)
3655 return t4_fixup_host_params_compat(adap, page_size, cache_line_size,
3660 * t4_fw_initialize - ask FW to initialize the device
3661 * @adap: the adapter
3662 * @mbox: mailbox to use for the FW command
3664 * Issues a command to FW to partially initialize the device. This
3665 * performs initialization that generally doesn't depend on user input.
3667 int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
3669 struct fw_initialize_cmd c;
3671 memset(&c, 0, sizeof(c));
3672 INIT_CMD(c, INITIALIZE, WRITE);
3673 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3677 * t4_query_params_rw - query FW or device parameters
3678 * @adap: the adapter
3679 * @mbox: mailbox to use for the FW command
3682 * @nparams: the number of parameters
3683 * @params: the parameter names
3684 * @val: the parameter values
3685 * @rw: Write and read flag
3687 * Reads the value of FW or device parameters. Up to 7 parameters can be
3690 static int t4_query_params_rw(struct adapter *adap, unsigned int mbox,
3691 unsigned int pf, unsigned int vf,
3692 unsigned int nparams, const u32 *params,
3697 struct fw_params_cmd c;
3698 __be32 *p = &c.param[0].mnem;
3703 memset(&c, 0, sizeof(c));
3704 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
3705 F_FW_CMD_REQUEST | F_FW_CMD_READ |
3706 V_FW_PARAMS_CMD_PFN(pf) |
3707 V_FW_PARAMS_CMD_VFN(vf));
3708 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3710 for (i = 0; i < nparams; i++) {
3711 *p++ = cpu_to_be32(*params++);
3713 *p = cpu_to_be32(*(val + i));
3717 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
3719 for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
3720 *val++ = be32_to_cpu(*p);
3724 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
3725 unsigned int vf, unsigned int nparams, const u32 *params,
3728 return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0);
3732 * t4_set_params_timeout - sets FW or device parameters
3733 * @adap: the adapter
3734 * @mbox: mailbox to use for the FW command
3737 * @nparams: the number of parameters
3738 * @params: the parameter names
3739 * @val: the parameter values
3740 * @timeout: the timeout time
3742 * Sets the value of FW or device parameters. Up to 7 parameters can be
3743 * specified at once.
3745 int t4_set_params_timeout(struct adapter *adap, unsigned int mbox,
3746 unsigned int pf, unsigned int vf,
3747 unsigned int nparams, const u32 *params,
3748 const u32 *val, int timeout)
3750 struct fw_params_cmd c;
3751 __be32 *p = &c.param[0].mnem;
3756 memset(&c, 0, sizeof(c));
3757 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
3758 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
3759 V_FW_PARAMS_CMD_PFN(pf) |
3760 V_FW_PARAMS_CMD_VFN(vf));
3761 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3764 *p++ = cpu_to_be32(*params++);
3765 *p++ = cpu_to_be32(*val++);
3768 return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout);
3771 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
3772 unsigned int vf, unsigned int nparams, const u32 *params,
3775 return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val,
3776 FW_CMD_MAX_TIMEOUT);
3780 * t4_alloc_vi_func - allocate a virtual interface
3781 * @adap: the adapter
3782 * @mbox: mailbox to use for the FW command
3783 * @port: physical port associated with the VI
3784 * @pf: the PF owning the VI
3785 * @vf: the VF owning the VI
3786 * @nmac: number of MAC addresses needed (1 to 5)
3787 * @mac: the MAC addresses of the VI
3788 * @rss_size: size of RSS table slice associated with this VI
3789 * @portfunc: which Port Application Function MAC Address is desired
3790 * @idstype: Intrusion Detection Type
3792 * Allocates a virtual interface for the given physical port. If @mac is
3793 * not %NULL it contains the MAC addresses of the VI as assigned by FW.
3794 * @mac should be large enough to hold @nmac Ethernet addresses, they are
3795 * stored consecutively so the space needed is @nmac * 6 bytes.
3796 * Returns a negative error number or the non-negative VI id.
3798 int t4_alloc_vi_func(struct adapter *adap, unsigned int mbox,
3799 unsigned int port, unsigned int pf, unsigned int vf,
3800 unsigned int nmac, u8 *mac, unsigned int *rss_size,
3801 unsigned int portfunc, unsigned int idstype,
3807 memset(&c, 0, sizeof(c));
3808 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST |
3809 F_FW_CMD_WRITE | F_FW_CMD_EXEC |
3810 V_FW_VI_CMD_PFN(pf) | V_FW_VI_CMD_VFN(vf));
3811 c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_ALLOC | FW_LEN16(c));
3812 c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_TYPE(idstype) |
3813 V_FW_VI_CMD_FUNC(portfunc));
3814 c.portid_pkd = V_FW_VI_CMD_PORTID(port);
3817 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
3822 memcpy(mac, c.mac, sizeof(c.mac));
3825 memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
3828 memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
3831 memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
3834 memcpy(mac + 6, c.nmac0, sizeof(c.nmac0));
3839 *rss_size = G_FW_VI_CMD_RSSSIZE(be16_to_cpu(c.norss_rsssize));
3841 *vivld = G_FW_VI_CMD_VFVLD(be32_to_cpu(c.alloc_to_len16));
3843 *vin = G_FW_VI_CMD_VIN(be32_to_cpu(c.alloc_to_len16));
3844 return G_FW_VI_CMD_VIID(cpu_to_be16(c.type_to_viid));
3848 * t4_alloc_vi - allocate an [Ethernet Function] virtual interface
3849 * @adap: the adapter
3850 * @mbox: mailbox to use for the FW command
3851 * @port: physical port associated with the VI
3852 * @pf: the PF owning the VI
3853 * @vf: the VF owning the VI
3854 * @nmac: number of MAC addresses needed (1 to 5)
3855 * @mac: the MAC addresses of the VI
3856 * @rss_size: size of RSS table slice associated with this VI
3858 * Backwards compatible and convieniance routine to allocate a Virtual
3859 * Interface with a Ethernet Port Application Function and Intrustion
3860 * Detection System disabled.
3862 int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
3863 unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
3864 unsigned int *rss_size, u8 *vivld, u8 *vin)
3866 return t4_alloc_vi_func(adap, mbox, port, pf, vf, nmac, mac, rss_size,
3867 FW_VI_FUNC_ETH, 0, vivld, vin);
3871 * t4_free_vi - free a virtual interface
3872 * @adap: the adapter
3873 * @mbox: mailbox to use for the FW command
3874 * @pf: the PF owning the VI
3875 * @vf: the VF owning the VI
3876 * @viid: virtual interface identifiler
3878 * Free a previously allocated virtual interface.
3880 int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
3881 unsigned int vf, unsigned int viid)
3885 memset(&c, 0, sizeof(c));
3886 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST |
3889 c.op_to_vfn |= cpu_to_be32(V_FW_VI_CMD_PFN(pf) |
3890 V_FW_VI_CMD_VFN(vf));
3891 c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_FREE | FW_LEN16(c));
3892 c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(viid));
3895 return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
3897 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
3901 * t4_set_rxmode - set Rx properties of a virtual interface
3902 * @adap: the adapter
3903 * @mbox: mailbox to use for the FW command
3905 * @mtu: the new MTU or -1
3906 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
3907 * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
3908 * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
3909 * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
3911 * @sleep_ok: if true we may sleep while awaiting command completion
3913 * Sets Rx properties of a virtual interface.
3915 int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
3916 int mtu, int promisc, int all_multi, int bcast, int vlanex,
3919 struct fw_vi_rxmode_cmd c;
3921 /* convert to FW values */
3923 mtu = M_FW_VI_RXMODE_CMD_MTU;
3925 promisc = M_FW_VI_RXMODE_CMD_PROMISCEN;
3927 all_multi = M_FW_VI_RXMODE_CMD_ALLMULTIEN;
3929 bcast = M_FW_VI_RXMODE_CMD_BROADCASTEN;
3931 vlanex = M_FW_VI_RXMODE_CMD_VLANEXEN;
3933 memset(&c, 0, sizeof(c));
3934 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_RXMODE_CMD) |
3935 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
3936 V_FW_VI_RXMODE_CMD_VIID(viid));
3937 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3938 c.mtu_to_vlanexen = cpu_to_be32(V_FW_VI_RXMODE_CMD_MTU(mtu) |
3939 V_FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
3940 V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
3941 V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast) |
3942 V_FW_VI_RXMODE_CMD_VLANEXEN(vlanex));
3944 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL,
3947 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
3951 * t4_alloc_raw_mac_filt - Adds a raw mac entry in mps tcam
3952 * @adap: the adapter
3954 * @mac: the MAC address
3956 * @idx: index at which to add this entry
3957 * @port_id: the port index
3958 * @lookup_type: MAC address for inner (1) or outer (0) header
3959 * @sleep_ok: call is allowed to sleep
3961 * Adds the mac entry at the specified index using raw mac interface.
3963 * Returns a negative error number or the allocated index for this mac.
3965 int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
3966 const u8 *addr, const u8 *mask, unsigned int idx,
3967 u8 lookup_type, u8 port_id, bool sleep_ok)
3970 struct fw_vi_mac_cmd c;
3971 struct fw_vi_mac_raw *p = &c.u.raw;
3974 memset(&c, 0, sizeof(c));
3975 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
3976 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
3977 V_FW_VI_MAC_CMD_VIID(viid));
3978 val = V_FW_CMD_LEN16(1) |
3979 V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
3980 c.freemacs_to_len16 = cpu_to_be32(val);
3982 /* Specify that this is an inner mac address */
3983 p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx));
3985 /* Lookup Type. Outer header: 0, Inner header: 1 */
3986 p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
3987 V_DATAPORTNUM(port_id));
3988 /* Lookup mask and port mask */
3989 p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
3990 V_DATAPORTNUM(M_DATAPORTNUM));
3992 /* Copy the address and the mask */
3993 memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
3994 memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
3996 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
3998 ret = G_FW_VI_MAC_CMD_RAW_IDX(be32_to_cpu(p->raw_idx_pkd));
3999 if (ret != (int)idx)
4007 * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
4008 * @adap: the adapter
4010 * @addr: the MAC address
4012 * @idx: index of the entry in mps tcam
4013 * @lookup_type: MAC address for inner (1) or outer (0) header
4014 * @port_id: the port index
4015 * @sleep_ok: call is allowed to sleep
4017 * Removes the mac entry at the specified index using raw mac interface.
4019 * Returns a negative error number on failure.
4021 int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
4022 const u8 *addr, const u8 *mask, unsigned int idx,
4023 u8 lookup_type, u8 port_id, bool sleep_ok)
4025 struct fw_vi_mac_cmd c;
4026 struct fw_vi_mac_raw *p = &c.u.raw;
4029 memset(&c, 0, sizeof(c));
4030 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
4031 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
4033 V_FW_VI_MAC_CMD_VIID(viid));
4034 raw = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
4035 c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0U) |
4039 p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx) |
4040 FW_VI_MAC_ID_BASED_FREE);
4042 /* Lookup Type. Outer header: 0, Inner header: 1 */
4043 p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
4044 V_DATAPORTNUM(port_id));
4045 /* Lookup mask and port mask */
4046 p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
4047 V_DATAPORTNUM(M_DATAPORTNUM));
4049 /* Copy the address and the mask */
4050 memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
4051 memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
4053 return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
4057 * t4_change_mac - modifies the exact-match filter for a MAC address
4058 * @adap: the adapter
4059 * @mbox: mailbox to use for the FW command
4061 * @idx: index of existing filter for old value of MAC address, or -1
4062 * @addr: the new MAC address value
4063 * @persist: whether a new MAC allocation should be persistent
4064 * @add_smt: if true also add the address to the HW SMT
4066 * Modifies an exact-match filter and sets it to the new MAC address if
4067 * @idx >= 0, or adds the MAC address to a new filter if @idx < 0. In the
4068 * latter case the address is added persistently if @persist is %true.
4070 * Note that in general it is not possible to modify the value of a given
4071 * filter so the generic way to modify an address filter is to free the one
4072 * being used by the old address value and allocate a new filter for the
4073 * new address value.
4075 * Returns a negative error number or the index of the filter with the new
4076 * MAC value. Note that this index may differ from @idx.
4078 int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
4079 int idx, const u8 *addr, bool persist, bool add_smt)
4082 struct fw_vi_mac_cmd c;
4083 struct fw_vi_mac_exact *p = c.u.exact;
4084 int max_mac_addr = adap->params.arch.mps_tcam_size;
4086 if (idx < 0) /* new allocation */
4087 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
4088 mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
4090 memset(&c, 0, sizeof(c));
4091 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
4092 F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
4093 V_FW_VI_MAC_CMD_VIID(viid));
4094 c.freemacs_to_len16 = cpu_to_be32(V_FW_CMD_LEN16(1));
4095 p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID |
4096 V_FW_VI_MAC_CMD_SMAC_RESULT(mode) |
4097 V_FW_VI_MAC_CMD_IDX(idx));
4098 memcpy(p->macaddr, addr, sizeof(p->macaddr));
4101 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
4103 ret = t4vf_wr_mbox(adap, &c, sizeof(c), &c);
4105 ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx));
4106 if (ret >= max_mac_addr)
4113 * t4_enable_vi_params - enable/disable a virtual interface
4114 * @adap: the adapter
4115 * @mbox: mailbox to use for the FW command
4117 * @rx_en: 1=enable Rx, 0=disable Rx
4118 * @tx_en: 1=enable Tx, 0=disable Tx
4119 * @dcb_en: 1=enable delivery of Data Center Bridging messages.
4121 * Enables/disables a virtual interface. Note that setting DCB Enable
4122 * only makes sense when enabling a Virtual Interface ...
4124 int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
4125 unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
4127 struct fw_vi_enable_cmd c;
4129 memset(&c, 0, sizeof(c));
4130 c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_ENABLE_CMD) |
4131 F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
4132 V_FW_VI_ENABLE_CMD_VIID(viid));
4133 c.ien_to_len16 = cpu_to_be32(V_FW_VI_ENABLE_CMD_IEN(rx_en) |
4134 V_FW_VI_ENABLE_CMD_EEN(tx_en) |
4135 V_FW_VI_ENABLE_CMD_DCB_INFO(dcb_en) |
4138 return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
4140 return t4vf_wr_mbox_ns(adap, &c, sizeof(c), NULL);
4144 * t4_enable_vi - enable/disable a virtual interface
4145 * @adap: the adapter
4146 * @mbox: mailbox to use for the FW command
4148 * @rx_en: 1=enable Rx, 0=disable Rx
4149 * @tx_en: 1=enable Tx, 0=disable Tx
4151 * Enables/disables a virtual interface. Note that setting DCB Enable
4152 * only makes sense when enabling a Virtual Interface ...
4154 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
4155 bool rx_en, bool tx_en)
4157 return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
4161 * t4_iq_start_stop - enable/disable an ingress queue and its FLs
4162 * @adap: the adapter
4163 * @mbox: mailbox to use for the FW command
4164 * @start: %true to enable the queues, %false to disable them
4165 * @pf: the PF owning the queues
4166 * @vf: the VF owning the queues
4167 * @iqid: ingress queue id
4168 * @fl0id: FL0 queue id or 0xffff if no attached FL0
4169 * @fl1id: FL1 queue id or 0xffff if no attached FL1
4171 * Starts or stops an ingress queue and its associated FLs, if any.
4173 int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start,
4174 unsigned int pf, unsigned int vf, unsigned int iqid,
4175 unsigned int fl0id, unsigned int fl1id)
4179 memset(&c, 0, sizeof(c));
4180 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
4182 c.alloc_to_len16 = cpu_to_be32(V_FW_IQ_CMD_IQSTART(start) |
4183 V_FW_IQ_CMD_IQSTOP(!start) |
4185 c.iqid = cpu_to_be16(iqid);
4186 c.fl0id = cpu_to_be16(fl0id);
4187 c.fl1id = cpu_to_be16(fl1id);
4189 c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) |
4190 V_FW_IQ_CMD_VFN(vf));
4191 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4193 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4198 * t4_iq_free - free an ingress queue and its FLs
4199 * @adap: the adapter
4200 * @mbox: mailbox to use for the FW command
4201 * @pf: the PF owning the queues
4202 * @vf: the VF owning the queues
4203 * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
4204 * @iqid: ingress queue id
4205 * @fl0id: FL0 queue id or 0xffff if no attached FL0
4206 * @fl1id: FL1 queue id or 0xffff if no attached FL1
4208 * Frees an ingress queue and its associated FLs, if any.
4210 int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
4211 unsigned int vf, unsigned int iqtype, unsigned int iqid,
4212 unsigned int fl0id, unsigned int fl1id)
4216 memset(&c, 0, sizeof(c));
4217 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
4220 c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) |
4221 V_FW_IQ_CMD_VFN(vf));
4222 c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_FREE | FW_LEN16(c));
4223 c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype));
4224 c.iqid = cpu_to_be16(iqid);
4225 c.fl0id = cpu_to_be16(fl0id);
4226 c.fl1id = cpu_to_be16(fl1id);
4228 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4230 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4234 * t4_eth_eq_free - free an Ethernet egress queue
4235 * @adap: the adapter
4236 * @mbox: mailbox to use for the FW command
4237 * @pf: the PF owning the queue
4238 * @vf: the VF owning the queue
4239 * @eqid: egress queue id
4241 * Frees an Ethernet egress queue.
4243 int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
4244 unsigned int vf, unsigned int eqid)
4246 struct fw_eq_eth_cmd c;
4248 memset(&c, 0, sizeof(c));
4249 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) |
4250 F_FW_CMD_REQUEST | F_FW_CMD_EXEC);
4252 c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) |
4253 V_FW_IQ_CMD_VFN(vf));
4254 c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c));
4255 c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid));
4257 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4259 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4263 * t4_link_down_rc_str - return a string for a Link Down Reason Code
4264 * @link_down_rc: Link Down Reason Code
4266 * Returns a string representation of the Link Down Reason Code.
4268 static const char *t4_link_down_rc_str(unsigned char link_down_rc)
4270 static const char * const reason[] = {
4273 "Auto-negotiation Failure",
4275 "Insufficient Airflow",
4276 "Unable To Determine Reason",
4277 "No RX Signal Detected",
4281 if (link_down_rc >= ARRAY_SIZE(reason))
4282 return "Bad Reason Code";
4284 return reason[link_down_rc];
4287 static u32 t4_speed_to_fwcap(u32 speed)
4291 return FW_PORT_CAP32_SPEED_100G;
4293 return FW_PORT_CAP32_SPEED_50G;
4295 return FW_PORT_CAP32_SPEED_40G;
4297 return FW_PORT_CAP32_SPEED_25G;
4299 return FW_PORT_CAP32_SPEED_10G;
4301 return FW_PORT_CAP32_SPEED_1G;
4303 return FW_PORT_CAP32_SPEED_100M;
4311 /* Return the highest speed set in the port capabilities, in Mb/s. */
4312 unsigned int t4_fwcap_to_speed(u32 caps)
4314 #define TEST_SPEED_RETURN(__caps_speed, __speed) \
4316 if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
4320 TEST_SPEED_RETURN(100G, 100000);
4321 TEST_SPEED_RETURN(50G, 50000);
4322 TEST_SPEED_RETURN(40G, 40000);
4323 TEST_SPEED_RETURN(25G, 25000);
4324 TEST_SPEED_RETURN(10G, 10000);
4325 TEST_SPEED_RETURN(1G, 1000);
4326 TEST_SPEED_RETURN(100M, 100);
4328 #undef TEST_SPEED_RETURN
4333 static void t4_set_link_autoneg_speed(struct port_info *pi, u32 *new_caps)
4335 struct link_config *lc = &pi->link_cfg;
4336 u32 caps = *new_caps;
4338 caps &= ~V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED);
4339 caps |= G_FW_PORT_CAP32_SPEED(lc->acaps);
4344 int t4_set_link_speed(struct port_info *pi, u32 speed, u32 *new_caps)
4346 u32 fw_speed_cap = t4_speed_to_fwcap(speed);
4347 struct link_config *lc = &pi->link_cfg;
4348 u32 caps = *new_caps;
4350 if (!(lc->pcaps & fw_speed_cap))
4353 caps &= ~V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED);
4354 caps |= fw_speed_cap;
4361 int t4_set_link_pause(struct port_info *pi, u8 autoneg, u8 pause_tx,
4362 u8 pause_rx, u32 *new_caps)
4364 struct link_config *lc = &pi->link_cfg;
4365 u32 caps = *new_caps;
4368 max_speed = t4_fwcap_to_speed(lc->link_caps);
4371 if (!(lc->pcaps & FW_PORT_CAP32_ANEG))
4374 caps |= FW_PORT_CAP32_ANEG;
4375 t4_set_link_autoneg_speed(pi, &caps);
4378 max_speed = t4_fwcap_to_speed(lc->acaps);
4380 caps &= ~FW_PORT_CAP32_ANEG;
4381 t4_set_link_speed(pi, max_speed, &caps);
4384 if (lc->pcaps & FW_PORT_CAP32_MDIAUTO)
4385 caps |= V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
4387 caps &= ~V_FW_PORT_CAP32_FC(M_FW_PORT_CAP32_FC);
4388 caps &= ~V_FW_PORT_CAP32_802_3(M_FW_PORT_CAP32_802_3);
4389 if (pause_tx && pause_rx) {
4390 caps |= FW_PORT_CAP32_FC_TX | FW_PORT_CAP32_FC_RX;
4391 if (lc->pcaps & FW_PORT_CAP32_802_3_PAUSE)
4392 caps |= FW_PORT_CAP32_802_3_PAUSE;
4393 } else if (pause_tx) {
4394 caps |= FW_PORT_CAP32_FC_TX;
4395 if (lc->pcaps & FW_PORT_CAP32_802_3_ASM_DIR)
4396 caps |= FW_PORT_CAP32_802_3_ASM_DIR;
4397 } else if (pause_rx) {
4398 caps |= FW_PORT_CAP32_FC_RX;
4399 if (lc->pcaps & FW_PORT_CAP32_802_3_PAUSE)
4400 caps |= FW_PORT_CAP32_802_3_PAUSE;
4402 if (lc->pcaps & FW_PORT_CAP32_802_3_ASM_DIR)
4403 caps |= FW_PORT_CAP32_802_3_ASM_DIR;
4411 int t4_set_link_fec(struct port_info *pi, u8 fec_rs, u8 fec_baser,
4412 u8 fec_none, u32 *new_caps)
4414 struct link_config *lc = &pi->link_cfg;
4415 u32 max_speed, caps = *new_caps;
4417 if (!(lc->pcaps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC)))
4420 /* Link might be down. In that case consider the max
4423 max_speed = t4_fwcap_to_speed(lc->link_caps);
4425 max_speed = t4_fwcap_to_speed(lc->acaps);
4427 caps &= ~V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC);
4429 switch (max_speed) {
4432 caps |= FW_PORT_CAP32_FEC_RS;
4440 switch (max_speed) {
4443 caps |= FW_PORT_CAP32_FEC_BASER_RS;
4451 caps |= FW_PORT_CAP32_FEC_NO_FEC;
4453 if (!(caps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC))) {
4454 /* No explicit encoding is requested.
4455 * So, default back to AUTO.
4457 switch (max_speed) {
4459 caps |= FW_PORT_CAP32_FEC_RS |
4460 FW_PORT_CAP32_FEC_NO_FEC;
4463 caps |= FW_PORT_CAP32_FEC_BASER_RS |
4464 FW_PORT_CAP32_FEC_NO_FEC;
4467 caps |= FW_PORT_CAP32_FEC_RS |
4468 FW_PORT_CAP32_FEC_BASER_RS |
4469 FW_PORT_CAP32_FEC_NO_FEC;
4482 * t4_handle_get_port_info - process a FW reply message
4483 * @pi: the port info
4484 * @rpl: start of the FW message
4486 * Processes a GET_PORT_INFO FW reply message.
4488 static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
4490 const struct fw_port_cmd *cmd = (const void *)rpl;
4491 u8 link_ok, link_down_rc, mod_type, port_type;
4492 u32 action, pcaps, acaps, link_caps, lstatus;
4493 struct link_config *lc = &pi->link_cfg;
4494 struct adapter *adapter = pi->adapter;
4497 /* Extract the various fields from the Port Information message.
4499 action = be32_to_cpu(cmd->action_to_len16);
4500 if (G_FW_PORT_CMD_ACTION(action) != FW_PORT_ACTION_GET_PORT_INFO32) {
4501 dev_warn(adapter, "Handle Port Information: Bad Command/Action %#x\n",
4506 lstatus = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
4507 link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS32) ? 1 : 0;
4508 link_down_rc = G_FW_PORT_CMD_LINKDNRC32(lstatus);
4509 port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus);
4510 mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus);
4512 pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
4513 acaps = be32_to_cpu(cmd->u.info32.acaps32);
4514 link_caps = be32_to_cpu(cmd->u.info32.linkattr32);
4516 if (mod_type != lc->mod_type) {
4517 t4_init_link_config(pi, pcaps, acaps, lc->mdio_addr,
4518 port_type, mod_type);
4519 t4_os_portmod_changed(adapter, pi->pidx);
4522 if (link_ok != lc->link_ok || acaps != lc->acaps ||
4523 link_caps != lc->link_caps) { /* something changed */
4524 if (!link_ok && lc->link_ok) {
4525 lc->link_down_rc = link_down_rc;
4526 dev_warn(adap, "Port %d link down, reason: %s\n",
4528 t4_link_down_rc_str(link_down_rc));
4530 lc->link_ok = link_ok;
4532 lc->link_caps = link_caps;
4533 t4_os_link_changed(adapter, pi->pidx);
4536 if (mod_changed != 0 && is_pf4(adapter) != 0) {
4537 u32 mod_caps = lc->admin_caps;
4540 ret = t4_link_l1cfg_ns(pi, mod_caps);
4541 if (ret != FW_SUCCESS)
4543 "Attempt to update new Transceiver Module settings %#x failed with error: %d\n",
4549 * t4_ctrl_eq_free - free a control egress queue
4550 * @adap: the adapter
4551 * @mbox: mailbox to use for the FW command
4552 * @pf: the PF owning the queue
4553 * @vf: the VF owning the queue
4554 * @eqid: egress queue id
4556 * Frees a control egress queue.
4558 int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
4559 unsigned int vf, unsigned int eqid)
4561 struct fw_eq_ctrl_cmd c;
4563 memset(&c, 0, sizeof(c));
4564 c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) |
4565 F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
4566 V_FW_EQ_CTRL_CMD_PFN(pf) |
4567 V_FW_EQ_CTRL_CMD_VFN(vf));
4568 c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c));
4569 c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid));
4570 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4574 * t4_handle_fw_rpl - process a FW reply message
4575 * @adap: the adapter
4576 * @rpl: start of the FW message
4578 * Processes a FW message, such as link state change messages.
4580 int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
4582 u8 opcode = *(const u8 *)rpl;
4585 * This might be a port command ... this simplifies the following
4586 * conditionals ... We can get away with pre-dereferencing
4587 * action_to_len16 because it's in the first 16 bytes and all messages
4588 * will be at least that long.
4590 const struct fw_port_cmd *p = (const void *)rpl;
4591 unsigned int action =
4592 G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16));
4594 if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO32) {
4595 /* link/module state change message */
4596 int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid));
4597 struct port_info *pi = NULL;
4600 for_each_port(adap, i) {
4601 pi = adap2pinfo(adap, i);
4602 if (pi->tx_chan == chan)
4606 t4_handle_get_port_info(pi, rpl);
4608 dev_warn(adap, "Unknown firmware reply %d\n", opcode);
4614 void t4_reset_link_config(struct adapter *adap, int idx)
4616 struct port_info *pi = adap2pinfo(adap, idx);
4617 struct link_config *lc = &pi->link_cfg;
4620 lc->link_down_rc = 0;
4625 * t4_init_link_config - initialize a link's SW state
4626 * @pi: the port info
4627 * @pcaps: link Port Capabilities
4628 * @acaps: link current Advertised Port Capabilities
4629 * @mdio_addr : address of the PHY
4630 * @port_type : firmware port type
4631 * @mod_type : firmware module type
4633 * Initializes the SW state maintained for each link, including the link's
4634 * capabilities and default speed/flow-control/autonegotiation settings.
4636 void t4_init_link_config(struct port_info *pi, u32 pcaps, u32 acaps,
4637 u8 mdio_addr, u8 port_type, u8 mod_type)
4639 u8 fec_rs = 0, fec_baser = 0, fec_none = 0;
4640 struct link_config *lc = &pi->link_cfg;
4644 lc->admin_caps = acaps;
4647 lc->mdio_addr = mdio_addr;
4648 lc->port_type = port_type;
4649 lc->mod_type = mod_type;
4652 lc->link_down_rc = 0;
4654 /* Turn Tx and Rx pause off by default */
4655 lc->admin_caps &= ~V_FW_PORT_CAP32_FC(M_FW_PORT_CAP32_FC);
4656 lc->admin_caps &= ~V_FW_PORT_CAP32_802_3(M_FW_PORT_CAP32_802_3);
4657 if (lc->pcaps & FW_PORT_CAP32_FORCE_PAUSE)
4658 lc->admin_caps &= ~FW_PORT_CAP32_FORCE_PAUSE;
4660 /* Reset FEC caps to default values */
4661 if (lc->pcaps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC)) {
4662 if (lc->acaps & FW_PORT_CAP32_FEC_RS)
4664 else if (lc->acaps & FW_PORT_CAP32_FEC_BASER_RS)
4669 lc->admin_caps &= ~V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC);
4670 t4_set_link_fec(pi, fec_rs, fec_baser, fec_none,
4674 if (lc->pcaps & FW_PORT_CAP32_FORCE_FEC)
4675 lc->admin_caps &= ~FW_PORT_CAP32_FORCE_FEC;
4677 /* Reset MDI to AUTO */
4678 if (lc->pcaps & FW_PORT_CAP32_MDIAUTO) {
4679 lc->admin_caps &= ~V_FW_PORT_CAP32_MDI(M_FW_PORT_CAP32_MDI);
4680 lc->admin_caps |= V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
4685 * t4_wait_dev_ready - wait till to reads of registers work
4687 * Right after the device is RESET is can take a small amount of time
4688 * for it to respond to register reads. Until then, all reads will
4689 * return either 0xff...ff or 0xee...ee. Return an error if reads
4690 * don't work within a reasonable time frame.
4692 static int t4_wait_dev_ready(struct adapter *adapter)
4696 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
4698 if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS)
4702 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
4703 if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS)
4706 dev_err(adapter, "Device didn't become ready for access, whoami = %#x\n",
4712 u32 vendor_and_model_id;
4716 int t4_get_flash_params(struct adapter *adapter)
4719 * Table for non-standard supported Flash parts. Note, all Flash
4720 * parts must have 64KB sectors.
4722 static struct flash_desc supported_flash[] = {
4723 { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
4728 unsigned int part, manufacturer;
4729 unsigned int density, size = 0;
4732 * Issue a Read ID Command to the Flash part. We decode supported
4733 * Flash parts and their sizes from this. There's a newer Query
4734 * Command which can retrieve detailed geometry information but
4735 * many Flash parts don't support it.
4737 ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID);
4739 ret = sf1_read(adapter, 3, 0, 1, &flashid);
4740 t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */
4745 * Check to see if it's one of our non-standard supported Flash parts.
4747 for (part = 0; part < ARRAY_SIZE(supported_flash); part++) {
4748 if (supported_flash[part].vendor_and_model_id == flashid) {
4749 adapter->params.sf_size =
4750 supported_flash[part].size_mb;
4751 adapter->params.sf_nsec =
4752 adapter->params.sf_size / SF_SEC_SIZE;
4758 * Decode Flash part size. The code below looks repetative with
4759 * common encodings, but that's not guaranteed in the JEDEC
4760 * specification for the Read JADEC ID command. The only thing that
4761 * we're guaranteed by the JADEC specification is where the
4762 * Manufacturer ID is in the returned result. After that each
4763 * Manufacturer ~could~ encode things completely differently.
4764 * Note, all Flash parts must have 64KB sectors.
4766 manufacturer = flashid & 0xff;
4767 switch (manufacturer) {
4768 case 0x20: { /* Micron/Numonix */
4770 * This Density -> Size decoding table is taken from Micron
4773 density = (flashid >> 16) & 0xff;
4776 size = 1 << 20; /* 1MB */
4779 size = 1 << 21; /* 2MB */
4782 size = 1 << 22; /* 4MB */
4785 size = 1 << 23; /* 8MB */
4788 size = 1 << 24; /* 16MB */
4791 size = 1 << 25; /* 32MB */
4794 size = 1 << 26; /* 64MB */
4797 size = 1 << 27; /* 128MB */
4800 size = 1 << 28; /* 256MB */
4806 case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
4808 * This Density -> Size decoding table is taken from ISSI
4811 density = (flashid >> 16) & 0xff;
4814 size = 1 << 25; /* 32MB */
4817 size = 1 << 26; /* 64MB */
4823 case 0xc2: { /* Macronix */
4825 * This Density -> Size decoding table is taken from Macronix
4828 density = (flashid >> 16) & 0xff;
4831 size = 1 << 23; /* 8MB */
4834 size = 1 << 24; /* 16MB */
4840 case 0xef: { /* Winbond */
4842 * This Density -> Size decoding table is taken from Winbond
4845 density = (flashid >> 16) & 0xff;
4848 size = 1 << 23; /* 8MB */
4851 size = 1 << 24; /* 16MB */
4858 /* If we didn't recognize the FLASH part, that's no real issue: the
4859 * Hardware/Software contract says that Hardware will _*ALWAYS*_
4860 * use a FLASH part which is at least 4MB in size and has 64KB
4861 * sectors. The unrecognized FLASH part is likely to be much larger
4862 * than 4MB, but that's all we really need.
4866 "Unknown Flash Part, ID = %#x, assuming 4MB\n",
4872 * Store decoded Flash size and fall through into vetting code.
4874 adapter->params.sf_size = size;
4875 adapter->params.sf_nsec = size / SF_SEC_SIZE;
4879 * We should reject adapters with FLASHes which are too small. So, emit
4882 if (adapter->params.sf_size < FLASH_MIN_SIZE)
4883 dev_warn(adapter, "WARNING: Flash Part ID %#x, size %#x < %#x\n",
4884 flashid, adapter->params.sf_size, FLASH_MIN_SIZE);
4889 static void set_pcie_completion_timeout(struct adapter *adapter,
4895 pcie_cap = t4_os_find_pci_capability(adapter, PCI_CAP_ID_EXP);
4897 t4_os_pci_read_cfg2(adapter, pcie_cap + PCI_EXP_DEVCTL2, &val);
4900 t4_os_pci_write_cfg2(adapter, pcie_cap + PCI_EXP_DEVCTL2, val);
4905 * t4_get_chip_type - Determine chip type from device ID
4906 * @adap: the adapter
4907 * @ver: adapter version
4909 int t4_get_chip_type(struct adapter *adap, int ver)
4911 enum chip_type chip = 0;
4912 u32 pl_rev = G_REV(t4_read_reg(adap, A_PL_REV));
4914 /* Retrieve adapter's device ID */
4917 chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
4920 chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
4923 dev_err(adap, "Device %d is not supported\n",
4924 adap->params.pci.device_id);
4932 * t4_prep_adapter - prepare SW and HW for operation
4933 * @adapter: the adapter
4935 * Initialize adapter SW state for the various HW modules, set initial
4936 * values for some adapter tunables, take PHYs out of reset, and
4937 * initialize the MDIO interface.
4939 int t4_prep_adapter(struct adapter *adapter)
4944 ret = t4_wait_dev_ready(adapter);
4948 pl_rev = G_REV(t4_read_reg(adapter, A_PL_REV));
4949 adapter->params.pci.device_id = adapter->pdev->id.device_id;
4950 adapter->params.pci.vendor_id = adapter->pdev->id.vendor_id;
4953 * WE DON'T NEED adapter->params.chip CODE ONCE PL_REV CONTAINS
4954 * ADAPTER (VERSION << 4 | REVISION)
4956 ver = CHELSIO_PCI_ID_VER(adapter->params.pci.device_id);
4957 adapter->params.chip = 0;
4960 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
4961 adapter->params.arch.sge_fl_db = F_DBPRIO | F_DBTYPE;
4962 adapter->params.arch.mps_tcam_size =
4963 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
4964 adapter->params.arch.mps_rplc_size = 128;
4965 adapter->params.arch.nchan = NCHAN;
4966 adapter->params.arch.vfcount = 128;
4967 /* Congestion map is for 4 channels so that
4968 * MPS can have 4 priority per port.
4970 adapter->params.arch.cng_ch_bits_log = 2;
4973 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
4974 adapter->params.arch.sge_fl_db = 0;
4975 adapter->params.arch.mps_tcam_size =
4976 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
4977 adapter->params.arch.mps_rplc_size = 256;
4978 adapter->params.arch.nchan = 2;
4979 adapter->params.arch.vfcount = 256;
4980 /* Congestion map is for 2 channels so that
4981 * MPS can have 8 priority per port.
4983 adapter->params.arch.cng_ch_bits_log = 3;
4986 dev_err(adapter, "%s: Device %d is not supported\n",
4987 __func__, adapter->params.pci.device_id);
4991 adapter->params.pci.vpd_cap_addr =
4992 t4_os_find_pci_capability(adapter, PCI_CAP_ID_VPD);
4994 ret = t4_get_flash_params(adapter);
4996 dev_err(adapter, "Unable to retrieve Flash Parameters, ret = %d\n",
5001 adapter->params.cim_la_size = CIMLA_SIZE;
5003 init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
5006 * Default port and clock for debugging in case we can't reach FW.
5008 adapter->params.nports = 1;
5009 adapter->params.portvec = 1;
5010 adapter->params.vpd.cclk = 50000;
5012 /* Set pci completion timeout value to 4 seconds. */
5013 set_pcie_completion_timeout(adapter, 0xd);
5018 * t4_bar2_sge_qregs - return BAR2 SGE Queue register information
5019 * @adapter: the adapter
5020 * @qid: the Queue ID
5021 * @qtype: the Ingress or Egress type for @qid
5022 * @pbar2_qoffset: BAR2 Queue Offset
5023 * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
5025 * Returns the BAR2 SGE Queue Registers information associated with the
5026 * indicated Absolute Queue ID. These are passed back in return value
5027 * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
5028 * and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
5030 * This may return an error which indicates that BAR2 SGE Queue
5031 * registers aren't available. If an error is not returned, then the
5032 * following values are returned:
5034 * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
5035 * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
5037 * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
5038 * require the "Inferred Queue ID" ability may be used. E.g. the
5039 * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
5040 * then these "Inferred Queue ID" register may not be used.
5042 int t4_bar2_sge_qregs(struct adapter *adapter, unsigned int qid,
5043 enum t4_bar2_qtype qtype, u64 *pbar2_qoffset,
5044 unsigned int *pbar2_qid)
5046 unsigned int page_shift, page_size, qpp_shift, qpp_mask;
5047 u64 bar2_page_offset, bar2_qoffset;
5048 unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred;
5051 * T4 doesn't support BAR2 SGE Queue registers.
5053 if (is_t4(adapter->params.chip))
5057 * Get our SGE Page Size parameters.
5059 page_shift = adapter->params.sge.hps + 10;
5060 page_size = 1 << page_shift;
5063 * Get the right Queues per Page parameters for our Queue.
5065 qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS ?
5066 adapter->params.sge.eq_qpp :
5067 adapter->params.sge.iq_qpp);
5068 qpp_mask = (1 << qpp_shift) - 1;
5071 * Calculate the basics of the BAR2 SGE Queue register area:
5072 * o The BAR2 page the Queue registers will be in.
5073 * o The BAR2 Queue ID.
5074 * o The BAR2 Queue ID Offset into the BAR2 page.
5076 bar2_page_offset = ((qid >> qpp_shift) << page_shift);
5077 bar2_qid = qid & qpp_mask;
5078 bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;
5081 * If the BAR2 Queue ID Offset is less than the Page Size, then the
5082 * hardware will infer the Absolute Queue ID simply from the writes to
5083 * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
5084 * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply
5085 * write to the first BAR2 SGE Queue Area within the BAR2 Page with
5086 * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
5087 * from the BAR2 Page and BAR2 Queue ID.
5089 * One important censequence of this is that some BAR2 SGE registers
5090 * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
5091 * there. But other registers synthesize the SGE Queue ID purely
5092 * from the writes to the registers -- the Write Combined Doorbell
5093 * Buffer is a good example. These BAR2 SGE Registers are only
5094 * available for those BAR2 SGE Register areas where the SGE Absolute
5095 * Queue ID can be inferred from simple writes.
5097 bar2_qoffset = bar2_page_offset;
5098 bar2_qinferred = (bar2_qid_offset < page_size);
5099 if (bar2_qinferred) {
5100 bar2_qoffset += bar2_qid_offset;
5104 *pbar2_qoffset = bar2_qoffset;
5105 *pbar2_qid = bar2_qid;
5110 * t4_init_sge_params - initialize adap->params.sge
5111 * @adapter: the adapter
5113 * Initialize various fields of the adapter's SGE Parameters structure.
5115 int t4_init_sge_params(struct adapter *adapter)
5117 struct sge_params *sge_params = &adapter->params.sge;
5119 unsigned int s_hps, s_qpp;
5122 * Extract the SGE Page Size for our PF.
5124 hps = t4_read_reg(adapter, A_SGE_HOST_PAGE_SIZE);
5125 s_hps = (S_HOSTPAGESIZEPF0 + (S_HOSTPAGESIZEPF1 - S_HOSTPAGESIZEPF0) *
5127 sge_params->hps = ((hps >> s_hps) & M_HOSTPAGESIZEPF0);
5130 * Extract the SGE Egress and Ingess Queues Per Page for our PF.
5132 s_qpp = (S_QUEUESPERPAGEPF0 +
5133 (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adapter->pf);
5134 qpp = t4_read_reg(adapter, A_SGE_EGRESS_QUEUES_PER_PAGE_PF);
5135 sge_params->eq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0);
5136 qpp = t4_read_reg(adapter, A_SGE_INGRESS_QUEUES_PER_PAGE_PF);
5137 sge_params->iq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0);
5143 * t4_init_tp_params - initialize adap->params.tp
5144 * @adap: the adapter
5146 * Initialize various fields of the adapter's TP Parameters structure.
5148 int t4_init_tp_params(struct adapter *adap)
5153 v = t4_read_reg(adap, A_TP_TIMER_RESOLUTION);
5154 adap->params.tp.tre = G_TIMERRESOLUTION(v);
5155 adap->params.tp.dack_re = G_DELAYEDACKRESOLUTION(v);
5157 /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
5158 for (chan = 0; chan < NCHAN; chan++)
5159 adap->params.tp.tx_modq[chan] = chan;
5162 * Cache the adapter's Compressed Filter Mode/Mask and global Ingress
5165 param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
5166 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) |
5167 V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_MODE_MASK));
5169 /* Read current value */
5170 ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
5173 dev_info(adap, "Current filter mode/mask 0x%x:0x%x\n",
5174 G_FW_PARAMS_PARAM_FILTER_MODE(v),
5175 G_FW_PARAMS_PARAM_FILTER_MASK(v));
5176 adap->params.tp.vlan_pri_map =
5177 G_FW_PARAMS_PARAM_FILTER_MODE(v);
5178 adap->params.tp.filter_mask =
5179 G_FW_PARAMS_PARAM_FILTER_MASK(v);
5182 "Failed to read filter mode/mask via fw api, using indirect-reg-read\n");
5184 /* In case of older-fw (which doesn't expose the api
5185 * FW_PARAM_DEV_FILTER_MODE_MASK) and newer-driver (which uses
5186 * the fw api) combination, fall-back to older method of reading
5187 * the filter mode from indirect-register
5189 t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
5190 &adap->params.tp.vlan_pri_map, 1,
5193 /* With the older-fw and newer-driver combination we might run
5194 * into an issue when user wants to use hash filter region but
5195 * the filter_mask is zero, in this case filter_mask validation
5196 * is tough. To avoid that we set the filter_mask same as filter
5197 * mode, which will behave exactly as the older way of ignoring
5198 * the filter mask validation.
5200 adap->params.tp.filter_mask = adap->params.tp.vlan_pri_map;
5203 t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
5204 &adap->params.tp.ingress_config, 1,
5205 A_TP_INGRESS_CONFIG);
5207 /* For T6, cache the adapter's compressed error vector
5208 * and passing outer header info for encapsulated packets.
5210 if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
5211 v = t4_read_reg(adap, A_TP_OUT_CONFIG);
5212 adap->params.tp.rx_pkt_encap = (v & F_CRXPKTENC) ? 1 : 0;
5216 * Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
5217 * shift positions of several elements of the Compressed Filter Tuple
5218 * for this adapter which we need frequently ...
5220 adap->params.tp.vlan_shift = t4_filter_field_shift(adap, F_VLAN);
5221 adap->params.tp.vnic_shift = t4_filter_field_shift(adap, F_VNIC_ID);
5222 adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT);
5223 adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
5225 adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
5227 adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
5229 adap->params.tp.tos_shift = t4_filter_field_shift(adap, F_TOS);
5231 v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
5232 adap->params.tp.hash_filter_mask = v;
5233 v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A);
5234 adap->params.tp.hash_filter_mask |= ((u64)v << 32);
5240 * t4_filter_field_shift - calculate filter field shift
5241 * @adap: the adapter
5242 * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits)
5244 * Return the shift position of a filter field within the Compressed
5245 * Filter Tuple. The filter field is specified via its selection bit
5246 * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN.
5248 int t4_filter_field_shift(const struct adapter *adap, unsigned int filter_sel)
5250 unsigned int filter_mode = adap->params.tp.vlan_pri_map;
5254 if ((filter_mode & filter_sel) == 0)
5257 for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) {
5258 switch (filter_mode & sel) {
5260 field_shift += W_FT_FCOE;
5263 field_shift += W_FT_PORT;
5266 field_shift += W_FT_VNIC_ID;
5269 field_shift += W_FT_VLAN;
5272 field_shift += W_FT_TOS;
5275 field_shift += W_FT_PROTOCOL;
5278 field_shift += W_FT_ETHERTYPE;
5281 field_shift += W_FT_MACMATCH;
5284 field_shift += W_FT_MPSHITTYPE;
5286 case F_FRAGMENTATION:
5287 field_shift += W_FT_FRAGMENTATION;
5294 int t4_init_rss_mode(struct adapter *adap, int mbox)
5297 struct fw_rss_vi_config_cmd rvc;
5299 memset(&rvc, 0, sizeof(rvc));
5301 for_each_port(adap, i) {
5302 struct port_info *p = adap2pinfo(adap, i);
5304 rvc.op_to_viid = htonl(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
5305 F_FW_CMD_REQUEST | F_FW_CMD_READ |
5306 V_FW_RSS_VI_CONFIG_CMD_VIID(p->viid));
5307 rvc.retval_len16 = htonl(FW_LEN16(rvc));
5308 ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
5311 p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen);
5316 int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
5318 u32 param, val, pcaps, acaps;
5319 enum fw_port_type port_type;
5320 struct fw_port_cmd cmd;
5321 u8 vivld = 0, vin = 0;
5326 param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) |
5327 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
5329 ret = t4_set_params(adap, mbox, pf, vf, 1, ¶m, &val);
5333 memset(&cmd, 0, sizeof(cmd));
5335 for_each_port(adap, i) {
5336 struct port_info *pi = adap2pinfo(adap, i);
5337 unsigned int rss_size = 0;
5340 while ((adap->params.portvec & (1 << j)) == 0)
5343 memset(&cmd, 0, sizeof(cmd));
5344 cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
5347 V_FW_PORT_CMD_PORTID(j));
5348 val = FW_PORT_ACTION_GET_PORT_INFO32;
5349 cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(val) |
5351 ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
5355 /* Extract the various fields from the Port Information
5358 lstatus32 = be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
5360 port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
5361 mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ?
5362 (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) : -1;
5363 pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
5364 acaps = be32_to_cpu(cmd.u.info32.acaps32);
5366 ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size,
5373 pi->rss_size = rss_size;
5374 t4_os_set_hw_addr(adap, i, addr);
5376 /* If fw supports returning the VIN as part of FW_VI_CMD,
5377 * save the returned values.
5379 if (adap->params.viid_smt_extn_support) {
5383 /* Retrieve the values from VIID */
5384 pi->vivld = G_FW_VIID_VIVLD(pi->viid);
5385 pi->vin = G_FW_VIID_VIN(pi->viid);
5388 t4_init_link_config(pi, pcaps, acaps, mdio_addr, port_type,
5389 FW_PORT_MOD_TYPE_NA);
5396 * t4_memory_rw_addr - read/write adapter memory via PCIE memory window
5397 * @adap: the adapter
5398 * @win: PCI-E Memory Window to use
5399 * @addr: address within adapter memory
5400 * @len: amount of memory to transfer
5401 * @hbuf: host memory buffer
5402 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
5404 * Reads/writes an [almost] arbitrary memory region in the firmware: the
5405 * firmware memory address and host buffer must be aligned on 32-bit
5406 * boudaries; the length may be arbitrary.
5409 * 1. The memory is transferred as a raw byte sequence from/to the
5410 * firmware's memory. If this memory contains data structures which
5411 * contain multi-byte integers, it's the caller's responsibility to
5412 * perform appropriate byte order conversions.
5414 * 2. It is the Caller's responsibility to ensure that no other code
5415 * uses the specified PCI-E Memory Window while this routine is
5416 * using it. This is typically done via the use of OS-specific
5419 int t4_memory_rw_addr(struct adapter *adap, int win, u32 addr,
5420 u32 len, void *hbuf, int dir)
5422 u32 pos, offset, resid;
5423 u32 win_pf, mem_reg, mem_aperture, mem_base;
5426 /* Argument sanity checks ...*/
5427 if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
5431 /* It's convenient to be able to handle lengths which aren't a
5432 * multiple of 32-bits because we often end up transferring files to
5433 * the firmware. So we'll handle that by normalizing the length here
5434 * and then handling any residual transfer at the end.
5439 /* Each PCI-E Memory Window is programmed with a window size -- or
5440 * "aperture" -- which controls the granularity of its mapping onto
5441 * adapter memory. We need to grab that aperture in order to know
5442 * how to use the specified window. The window is also programmed
5443 * with the base address of the Memory Window in BAR0's address
5444 * space. For T4 this is an absolute PCI-E Bus Address. For T5
5445 * the address is relative to BAR0.
5447 mem_reg = t4_read_reg(adap,
5448 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
5450 mem_aperture = 1 << (G_WINDOW(mem_reg) + X_WINDOW_SHIFT);
5451 mem_base = G_PCIEOFST(mem_reg) << X_PCIEOFST_SHIFT;
5453 win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->pf);
5455 /* Calculate our initial PCI-E Memory Window Position and Offset into
5458 pos = addr & ~(mem_aperture - 1);
5459 offset = addr - pos;
5461 /* Set up initial PCI-E Memory Window to cover the start of our
5462 * transfer. (Read it back to ensure that changes propagate before we
5463 * attempt to use the new value.)
5466 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win),
5469 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win));
5471 /* Transfer data to/from the adapter as long as there's an integral
5472 * number of 32-bit transfers to complete.
5474 * A note on Endianness issues:
5476 * The "register" reads and writes below from/to the PCI-E Memory
5477 * Window invoke the standard adapter Big-Endian to PCI-E Link
5478 * Little-Endian "swizzel." As a result, if we have the following
5479 * data in adapter memory:
5481 * Memory: ... | b0 | b1 | b2 | b3 | ...
5482 * Address: i+0 i+1 i+2 i+3
5484 * Then a read of the adapter memory via the PCI-E Memory Window
5489 * [ b3 | b2 | b1 | b0 ]
5491 * If this value is stored into local memory on a Little-Endian system
5492 * it will show up correctly in local memory as:
5494 * ( ..., b0, b1, b2, b3, ... )
5496 * But on a Big-Endian system, the store will show up in memory
5497 * incorrectly swizzled as:
5499 * ( ..., b3, b2, b1, b0, ... )
5501 * So we need to account for this in the reads and writes to the
5502 * PCI-E Memory Window below by undoing the register read/write
5506 if (dir == T4_MEMORY_READ)
5507 *buf++ = le32_to_cpu((__le32)t4_read_reg(adap,
5511 t4_write_reg(adap, mem_base + offset,
5512 (u32)cpu_to_le32(*buf++));
5513 offset += sizeof(__be32);
5514 len -= sizeof(__be32);
5516 /* If we've reached the end of our current window aperture,
5517 * move the PCI-E Memory Window on to the next. Note that
5518 * doing this here after "len" may be 0 allows us to set up
5519 * the PCI-E Memory Window for a possible final residual
5520 * transfer below ...
5522 if (offset == mem_aperture) {
5523 pos += mem_aperture;
5526 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
5527 win), pos | win_pf);
5529 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
5534 /* If the original transfer had a length which wasn't a multiple of
5535 * 32-bits, now's where we need to finish off the transfer of the
5536 * residual amount. The PCI-E Memory Window has already been moved
5537 * above (if necessary) to cover this final transfer.
5547 if (dir == T4_MEMORY_READ) {
5548 last.word = le32_to_cpu((__le32)t4_read_reg(adap,
5551 for (bp = (unsigned char *)buf, i = resid; i < 4; i++)
5552 bp[i] = last.byte[i];
5555 for (i = resid; i < 4; i++)
5557 t4_write_reg(adap, mem_base + offset,
5558 (u32)cpu_to_le32(last.word));
5566 * t4_memory_rw_mtype -read/write EDC 0, EDC 1 or MC via PCIE memory window
5567 * @adap: the adapter
5568 * @win: PCI-E Memory Window to use
5569 * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
5570 * @maddr: address within indicated memory type
5571 * @len: amount of memory to transfer
5572 * @hbuf: host memory buffer
5573 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
5575 * Reads/writes adapter memory using t4_memory_rw_addr(). This routine
5576 * provides an (memory type, address within memory type) interface.
5578 int t4_memory_rw_mtype(struct adapter *adap, int win, int mtype, u32 maddr,
5579 u32 len, void *hbuf, int dir)
5582 u32 edc_size, mc_size;
5584 /* Offset into the region of memory which is being accessed
5587 * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller
5588 * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5)
5590 edc_size = G_EDRAM0_SIZE(t4_read_reg(adap, A_MA_EDRAM0_BAR));
5591 if (mtype != MEM_MC1) {
5592 mtype_offset = (mtype * (edc_size * 1024 * 1024));
5594 mc_size = G_EXT_MEM0_SIZE(t4_read_reg(adap,
5595 A_MA_EXT_MEMORY0_BAR));
5596 mtype_offset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
5599 return t4_memory_rw_addr(adap, win,
5600 mtype_offset + maddr, len,