drivers/net/cxgbe/base/t4_hw.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright(c) 2014-2018 Chelsio Communications.
   3  * All rights reserved.
   4  */
   5
   6 #include <netinet/in.h>
   7
   8 #include <rte_interrupts.h>
   9 #include <rte_log.h>
  10 #include <rte_debug.h>
  11 #include <rte_pci.h>
  12 #include <rte_atomic.h>
  13 #include <rte_branch_prediction.h>
  14 #include <rte_memory.h>
  15 #include <rte_tailq.h>
  16 #include <rte_eal.h>
  17 #include <rte_alarm.h>
  18 #include <rte_ether.h>
  19 #include <rte_ethdev_driver.h>
  20 #include <rte_malloc.h>
  21 #include <rte_random.h>
  22 #include <rte_dev.h>
  23 #include <rte_byteorder.h>
  24
  25 #include "common.h"
  26 #include "t4_regs.h"
  27 #include "t4_regs_values.h"
  28 #include "t4fw_interface.h"
  29
  30 /**
  31  * t4_read_mtu_tbl - returns the values in the HW path MTU table
  32  * @adap: the adapter
  33  * @mtus: where to store the MTU values
  34  * @mtu_log: where to store the MTU base-2 log (may be %NULL)
  35  *
  36  * Reads the HW path MTU table.
  37  */
  38 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
  39 {
  40         u32 v;
  41         int i;
  42
  43         for (i = 0; i < NMTUS; ++i) {
  44                 t4_write_reg(adap, A_TP_MTU_TABLE,
  45                              V_MTUINDEX(0xff) | V_MTUVALUE(i));
  46                 v = t4_read_reg(adap, A_TP_MTU_TABLE);
  47                 mtus[i] = G_MTUVALUE(v);
  48                 if (mtu_log)
  49                         mtu_log[i] = G_MTUWIDTH(v);
  50         }
  51 }
  52
  53 /**
  54  * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
  55  * @adap: the adapter
  56  * @addr: the indirect TP register address
  57  * @mask: specifies the field within the register to modify
  58  * @val: new value for the field
  59  *
  60  * Sets a field of an indirect TP register to the given value.
  61  */
  62 void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
  63                             unsigned int mask, unsigned int val)
  64 {
  65         t4_write_reg(adap, A_TP_PIO_ADDR, addr);
  66         val |= t4_read_reg(adap, A_TP_PIO_DATA) & ~mask;
  67         t4_write_reg(adap, A_TP_PIO_DATA, val);
  68 }
  69
  70 /* The minimum additive increment value for the congestion control table */
  71 #define CC_MIN_INCR 2U
  72
  73 /**
  74  * t4_load_mtus - write the MTU and congestion control HW tables
  75  * @adap: the adapter
  76  * @mtus: the values for the MTU table
  77  * @alpha: the values for the congestion control alpha parameter
  78  * @beta: the values for the congestion control beta parameter
  79  *
  80  * Write the HW MTU table with the supplied MTUs and the high-speed
  81  * congestion control table with the supplied alpha, beta, and MTUs.
  82  * We write the two tables together because the additive increments
  83  * depend on the MTUs.
  84  */
  85 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
  86                   const unsigned short *alpha, const unsigned short *beta)
  87 {
  88         static const unsigned int avg_pkts[NCCTRL_WIN] = {
  89                 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
  90                 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
  91                 28672, 40960, 57344, 81920, 114688, 163840, 229376
  92         };
  93
  94         unsigned int i, w;
  95
  96         for (i = 0; i < NMTUS; ++i) {
  97                 unsigned int mtu = mtus[i];
  98                 unsigned int log2 = cxgbe_fls(mtu);
  99
 100                 if (!(mtu & ((1 << log2) >> 2)))     /* round */
 101                         log2--;
 102                 t4_write_reg(adap, A_TP_MTU_TABLE, V_MTUINDEX(i) |
 103                              V_MTUWIDTH(log2) | V_MTUVALUE(mtu));
 104
 105                 for (w = 0; w < NCCTRL_WIN; ++w) {
 106                         unsigned int inc;
 107
 108                         inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
 109                                   CC_MIN_INCR);
 110
 111                         t4_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) |
 112                                      (w << 16) | (beta[w] << 13) | inc);
 113                 }
 114         }
 115 }
 116
 117 /**
 118  * t4_wait_op_done_val - wait until an operation is completed
 119  * @adapter: the adapter performing the operation
 120  * @reg: the register to check for completion
 121  * @mask: a single-bit field within @reg that indicates completion
 122  * @polarity: the value of the field when the operation is completed
 123  * @attempts: number of check iterations
 124  * @delay: delay in usecs between iterations
 125  * @valp: where to store the value of the register at completion time
 126  *
 127  * Wait until an operation is completed by checking a bit in a register
 128  * up to @attempts times.  If @valp is not NULL the value of the register
 129  * at the time it indicated completion is stored there.  Returns 0 if the
 130  * operation completes and -EAGAIN otherwise.
 131  */
 132 int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
 133                         int polarity, int attempts, int delay, u32 *valp)
 134 {
 135         while (1) {
 136                 u32 val = t4_read_reg(adapter, reg);
 137
 138                 if (!!(val & mask) == polarity) {
 139                         if (valp)
 140                                 *valp = val;
 141                         return 0;
 142                 }
 143                 if (--attempts == 0)
 144                         return -EAGAIN;
 145                 if (delay)
 146                         udelay(delay);
 147         }
 148 }
 149
 150 /**
 151  * t4_set_reg_field - set a register field to a value
 152  * @adapter: the adapter to program
 153  * @addr: the register address
 154  * @mask: specifies the portion of the register to modify
 155  * @val: the new value for the register field
 156  *
 157  * Sets a register field specified by the supplied mask to the
 158  * given value.
 159  */
 160 void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
 161                       u32 val)
 162 {
 163         u32 v = t4_read_reg(adapter, addr) & ~mask;
 164
 165         t4_write_reg(adapter, addr, v | val);
 166         (void)t4_read_reg(adapter, addr);      /* flush */
 167 }
 168
 169 /**
 170  * t4_read_indirect - read indirectly addressed registers
 171  * @adap: the adapter
 172  * @addr_reg: register holding the indirect address
 173  * @data_reg: register holding the value of the indirect register
 174  * @vals: where the read register values are stored
 175  * @nregs: how many indirect registers to read
 176  * @start_idx: index of first indirect register to read
 177  *
 178  * Reads registers that are accessed indirectly through an address/data
 179  * register pair.
 180  */
 181 void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
 182                       unsigned int data_reg, u32 *vals, unsigned int nregs,
 183                       unsigned int start_idx)
 184 {
 185         while (nregs--) {
 186                 t4_write_reg(adap, addr_reg, start_idx);
 187                 *vals++ = t4_read_reg(adap, data_reg);
 188                 start_idx++;
 189         }
 190 }
 191
 192 /**
 193  * t4_write_indirect - write indirectly addressed registers
 194  * @adap: the adapter
 195  * @addr_reg: register holding the indirect addresses
 196  * @data_reg: register holding the value for the indirect registers
 197  * @vals: values to write
 198  * @nregs: how many indirect registers to write
 199  * @start_idx: address of first indirect register to write
 200  *
 201  * Writes a sequential block of registers that are accessed indirectly
 202  * through an address/data register pair.
 203  */
 204 void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
 205                        unsigned int data_reg, const u32 *vals,
 206                        unsigned int nregs, unsigned int start_idx)
 207 {
 208         while (nregs--) {
 209                 t4_write_reg(adap, addr_reg, start_idx++);
 210                 t4_write_reg(adap, data_reg, *vals++);
 211         }
 212 }
 213
 214 /**
 215  * t4_report_fw_error - report firmware error
 216  * @adap: the adapter
 217  *
 218  * The adapter firmware can indicate error conditions to the host.
 219  * If the firmware has indicated an error, print out the reason for
 220  * the firmware error.
 221  */
 222 static void t4_report_fw_error(struct adapter *adap)
 223 {
 224         static const char * const reason[] = {
 225                 "Crash",                        /* PCIE_FW_EVAL_CRASH */
 226                 "During Device Preparation",    /* PCIE_FW_EVAL_PREP */
 227                 "During Device Configuration",  /* PCIE_FW_EVAL_CONF */
 228                 "During Device Initialization", /* PCIE_FW_EVAL_INIT */
 229                 "Unexpected Event",     /* PCIE_FW_EVAL_UNEXPECTEDEVENT */
 230                 "Insufficient Airflow",         /* PCIE_FW_EVAL_OVERHEAT */
 231                 "Device Shutdown",      /* PCIE_FW_EVAL_DEVICESHUTDOWN */
 232                 "Reserved",                     /* reserved */
 233         };
 234         u32 pcie_fw;
 235
 236         pcie_fw = t4_read_reg(adap, A_PCIE_FW);
 237         if (pcie_fw & F_PCIE_FW_ERR)
 238                 pr_err("%s: Firmware reports adapter error: %s\n",
 239                        __func__, reason[G_PCIE_FW_EVAL(pcie_fw)]);
 240 }
 241
 242 /*
 243  * Get the reply to a mailbox command and store it in @rpl in big-endian order.
 244  */
 245 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
 246                          u32 mbox_addr)
 247 {
 248         for ( ; nflit; nflit--, mbox_addr += 8)
 249                 *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
 250 }
 251
 252 /*
 253  * Handle a FW assertion reported in a mailbox.
 254  */
 255 static void fw_asrt(struct adapter *adap, u32 mbox_addr)
 256 {
 257         struct fw_debug_cmd asrt;
 258
 259         get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
 260         pr_warn("FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
 261                 asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line),
 262                 be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
 263 }
 264
 265 #define X_CIM_PF_NOACCESS 0xeeeeeeee
 266
 267 /*
 268  * If the Host OS Driver needs locking arround accesses to the mailbox, this
 269  * can be turned on via the T4_OS_NEEDS_MBOX_LOCKING CPP define ...
 270  */
 271 /* makes single-statement usage a bit cleaner ... */
 272 #ifdef T4_OS_NEEDS_MBOX_LOCKING
 273 #define T4_OS_MBOX_LOCKING(x) x
 274 #else
 275 #define T4_OS_MBOX_LOCKING(x) do {} while (0)
 276 #endif
 277
 278 /**
 279  * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox
 280  * @adap: the adapter
 281  * @mbox: index of the mailbox to use
 282  * @cmd: the command to write
 283  * @size: command length in bytes
 284  * @rpl: where to optionally store the reply
 285  * @sleep_ok: if true we may sleep while awaiting command completion
 286  * @timeout: time to wait for command to finish before timing out
 287  *           (negative implies @sleep_ok=false)
 288  *
 289  * Sends the given command to FW through the selected mailbox and waits
 290  * for the FW to execute the command.  If @rpl is not %NULL it is used to
 291  * store the FW's reply to the command.  The command and its optional
 292  * reply are of the same length.  Some FW commands like RESET and
 293  * INITIALIZE can take a considerable amount of time to execute.
 294  * @sleep_ok determines whether we may sleep while awaiting the response.
 295  * If sleeping is allowed we use progressive backoff otherwise we spin.
 296  * Note that passing in a negative @timeout is an alternate mechanism
 297  * for specifying @sleep_ok=false.  This is useful when a higher level
 298  * interface allows for specification of @timeout but not @sleep_ok ...
 299  *
 300  * Returns 0 on success or a negative errno on failure.  A
 301  * failure can happen either because we are not able to execute the
 302  * command or FW executes it but signals an error.  In the latter case
 303  * the return value is the error code indicated by FW (negated).
 304  */
 305 int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox,
 306                             const void __attribute__((__may_alias__)) *cmd,
 307                             int size, void *rpl, bool sleep_ok, int timeout)
 308 {
 309         /*
 310          * We delay in small increments at first in an effort to maintain
 311          * responsiveness for simple, fast executing commands but then back
 312          * off to larger delays to a maximum retry delay.
 313          */
 314         static const int delay[] = {
 315                 1, 1, 3, 5, 10, 10, 20, 50, 100
 316         };
 317
 318         u32 v;
 319         u64 res;
 320         int i, ms;
 321         unsigned int delay_idx;
 322         __be64 *temp = (__be64 *)malloc(size * sizeof(char));
 323         __be64 *p = temp;
 324         u32 data_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_DATA);
 325         u32 ctl_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_CTRL);
 326         u32 ctl;
 327         struct mbox_entry entry;
 328         u32 pcie_fw = 0;
 329
 330         if (!temp)
 331                 return -ENOMEM;
 332
 333         if ((size & 15) || size > MBOX_LEN) {
 334                 free(temp);
 335                 return -EINVAL;
 336         }
 337
 338         memset(p, 0, size);
 339         memcpy(p, (const __be64 *)cmd, size);
 340
 341         /*
 342          * If we have a negative timeout, that implies that we can't sleep.
 343          */
 344         if (timeout < 0) {
 345                 sleep_ok = false;
 346                 timeout = -timeout;
 347         }
 348
 349 #ifdef T4_OS_NEEDS_MBOX_LOCKING
 350         /*
 351          * Queue ourselves onto the mailbox access list.  When our entry is at
 352          * the front of the list, we have rights to access the mailbox.  So we
 353          * wait [for a while] till we're at the front [or bail out with an
 354          * EBUSY] ...
 355          */
 356         t4_os_atomic_add_tail(&entry, &adap->mbox_list, &adap->mbox_lock);
 357
 358         delay_idx = 0;
 359         ms = delay[0];
 360
 361         for (i = 0; ; i += ms) {
 362                 /*
 363                  * If we've waited too long, return a busy indication.  This
 364                  * really ought to be based on our initial position in the
 365                  * mailbox access list but this is a start.  We very rarely
 366                  * contend on access to the mailbox ...  Also check for a
 367                  * firmware error which we'll report as a device error.
 368                  */
 369                 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
 370                 if (i > 4 * timeout || (pcie_fw & F_PCIE_FW_ERR)) {
 371                         t4_os_atomic_list_del(&entry, &adap->mbox_list,
 372                                               &adap->mbox_lock);
 373                         t4_report_fw_error(adap);
 374                         free(temp);
 375                         return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -EBUSY;
 376                 }
 377
 378                 /*
 379                  * If we're at the head, break out and start the mailbox
 380                  * protocol.
 381                  */
 382                 if (t4_os_list_first_entry(&adap->mbox_list) == &entry)
 383                         break;
 384
 385                 /*
 386                  * Delay for a bit before checking again ...
 387                  */
 388                 if (sleep_ok) {
 389                         ms = delay[delay_idx];  /* last element may repeat */
 390                         if (delay_idx < ARRAY_SIZE(delay) - 1)
 391                                 delay_idx++;
 392                         msleep(ms);
 393                 } else {
 394                         rte_delay_ms(ms);
 395                 }
 396         }
 397 #endif /* T4_OS_NEEDS_MBOX_LOCKING */
 398
 399         /*
 400          * Attempt to gain access to the mailbox.
 401          */
 402         for (i = 0; i < 4; i++) {
 403                 ctl = t4_read_reg(adap, ctl_reg);
 404                 v = G_MBOWNER(ctl);
 405                 if (v != X_MBOWNER_NONE)
 406                         break;
 407         }
 408
 409         /*
 410          * If we were unable to gain access, dequeue ourselves from the
 411          * mailbox atomic access list and report the error to our caller.
 412          */
 413         if (v != X_MBOWNER_PL) {
 414                 T4_OS_MBOX_LOCKING(t4_os_atomic_list_del(&entry,
 415                                                          &adap->mbox_list,
 416                                                          &adap->mbox_lock));
 417                 t4_report_fw_error(adap);
 418                 free(temp);
 419                 return (v == X_MBOWNER_FW ? -EBUSY : -ETIMEDOUT);
 420         }
 421
 422         /*
 423          * If we gain ownership of the mailbox and there's a "valid" message
 424          * in it, this is likely an asynchronous error message from the
 425          * firmware.  So we'll report that and then proceed on with attempting
 426          * to issue our own command ... which may well fail if the error
 427          * presaged the firmware crashing ...
 428          */
 429         if (ctl & F_MBMSGVALID) {
 430                 dev_err(adap, "found VALID command in mbox %u: "
 431                         "%llx %llx %llx %llx %llx %llx %llx %llx\n", mbox,
 432                         (unsigned long long)t4_read_reg64(adap, data_reg),
 433                         (unsigned long long)t4_read_reg64(adap, data_reg + 8),
 434                         (unsigned long long)t4_read_reg64(adap, data_reg + 16),
 435                         (unsigned long long)t4_read_reg64(adap, data_reg + 24),
 436                         (unsigned long long)t4_read_reg64(adap, data_reg + 32),
 437                         (unsigned long long)t4_read_reg64(adap, data_reg + 40),
 438                         (unsigned long long)t4_read_reg64(adap, data_reg + 48),
 439                         (unsigned long long)t4_read_reg64(adap, data_reg + 56));
 440         }
 441
 442         /*
 443          * Copy in the new mailbox command and send it on its way ...
 444          */
 445         for (i = 0; i < size; i += 8, p++)
 446                 t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p));
 447
 448         CXGBE_DEBUG_MBOX(adap, "%s: mbox %u: %016llx %016llx %016llx %016llx "
 449                         "%016llx %016llx %016llx %016llx\n", __func__,  (mbox),
 450                         (unsigned long long)t4_read_reg64(adap, data_reg),
 451                         (unsigned long long)t4_read_reg64(adap, data_reg + 8),
 452                         (unsigned long long)t4_read_reg64(adap, data_reg + 16),
 453                         (unsigned long long)t4_read_reg64(adap, data_reg + 24),
 454                         (unsigned long long)t4_read_reg64(adap, data_reg + 32),
 455                         (unsigned long long)t4_read_reg64(adap, data_reg + 40),
 456                         (unsigned long long)t4_read_reg64(adap, data_reg + 48),
 457                         (unsigned long long)t4_read_reg64(adap, data_reg + 56));
 458
 459         t4_write_reg(adap, ctl_reg, F_MBMSGVALID | V_MBOWNER(X_MBOWNER_FW));
 460         t4_read_reg(adap, ctl_reg);          /* flush write */
 461
 462         delay_idx = 0;
 463         ms = delay[0];
 464
 465         /*
 466          * Loop waiting for the reply; bail out if we time out or the firmware
 467          * reports an error.
 468          */
 469         pcie_fw = t4_read_reg(adap, A_PCIE_FW);
 470         for (i = 0; i < timeout && !(pcie_fw & F_PCIE_FW_ERR); i += ms) {
 471                 if (sleep_ok) {
 472                         ms = delay[delay_idx];  /* last element may repeat */
 473                         if (delay_idx < ARRAY_SIZE(delay) - 1)
 474                                 delay_idx++;
 475                         msleep(ms);
 476                 } else {
 477                         msleep(ms);
 478                 }
 479
 480                 pcie_fw = t4_read_reg(adap, A_PCIE_FW);
 481                 v = t4_read_reg(adap, ctl_reg);
 482                 if (v == X_CIM_PF_NOACCESS)
 483                         continue;
 484                 if (G_MBOWNER(v) == X_MBOWNER_PL) {
 485                         if (!(v & F_MBMSGVALID)) {
 486                                 t4_write_reg(adap, ctl_reg,
 487                                              V_MBOWNER(X_MBOWNER_NONE));
 488                                 continue;
 489                         }
 490
 491                         CXGBE_DEBUG_MBOX(adap,
 492                         "%s: mbox %u: %016llx %016llx %016llx %016llx "
 493                         "%016llx %016llx %016llx %016llx\n", __func__,  (mbox),
 494                         (unsigned long long)t4_read_reg64(adap, data_reg),
 495                         (unsigned long long)t4_read_reg64(adap, data_reg + 8),
 496                         (unsigned long long)t4_read_reg64(adap, data_reg + 16),
 497                         (unsigned long long)t4_read_reg64(adap, data_reg + 24),
 498                         (unsigned long long)t4_read_reg64(adap, data_reg + 32),
 499                         (unsigned long long)t4_read_reg64(adap, data_reg + 40),
 500                         (unsigned long long)t4_read_reg64(adap, data_reg + 48),
 501                         (unsigned long long)t4_read_reg64(adap, data_reg + 56));
 502
 503                         CXGBE_DEBUG_MBOX(adap,
 504                                 "command %#x completed in %d ms (%ssleeping)\n",
 505                                 *(const u8 *)cmd,
 506                                 i + ms, sleep_ok ? "" : "non-");
 507
 508                         res = t4_read_reg64(adap, data_reg);
 509                         if (G_FW_CMD_OP(res >> 32) == FW_DEBUG_CMD) {
 510                                 fw_asrt(adap, data_reg);
 511                                 res = V_FW_CMD_RETVAL(EIO);
 512                         } else if (rpl) {
 513                                 get_mbox_rpl(adap, rpl, size / 8, data_reg);
 514                         }
 515                         t4_write_reg(adap, ctl_reg, V_MBOWNER(X_MBOWNER_NONE));
 516                         T4_OS_MBOX_LOCKING(
 517                                 t4_os_atomic_list_del(&entry, &adap->mbox_list,
 518                                                       &adap->mbox_lock));
 519                         free(temp);
 520                         return -G_FW_CMD_RETVAL((int)res);
 521                 }
 522         }
 523
 524         /*
 525          * We timed out waiting for a reply to our mailbox command.  Report
 526          * the error and also check to see if the firmware reported any
 527          * errors ...
 528          */
 529         dev_err(adap, "command %#x in mailbox %d timed out\n",
 530                 *(const u8 *)cmd, mbox);
 531         T4_OS_MBOX_LOCKING(t4_os_atomic_list_del(&entry,
 532                                                  &adap->mbox_list,
 533                                                  &adap->mbox_lock));
 534         t4_report_fw_error(adap);
 535         free(temp);
 536         return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -ETIMEDOUT;
 537 }
 538
 539 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
 540                     void *rpl, bool sleep_ok)
 541 {
 542         return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok,
 543                                        FW_CMD_MAX_TIMEOUT);
 544 }
 545
 546 /**
 547  * t4_get_regs_len - return the size of the chips register set
 548  * @adapter: the adapter
 549  *
 550  * Returns the size of the chip's BAR0 register space.
 551  */
 552 unsigned int t4_get_regs_len(struct adapter *adapter)
 553 {
 554         unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
 555
 556         switch (chip_version) {
 557         case CHELSIO_T5:
 558         case CHELSIO_T6:
 559                 return T5_REGMAP_SIZE;
 560         }
 561
 562         dev_err(adapter,
 563                 "Unsupported chip version %d\n", chip_version);
 564         return 0;
 565 }
 566
 567 /**
 568  * t4_get_regs - read chip registers into provided buffer
 569  * @adap: the adapter
 570  * @buf: register buffer
 571  * @buf_size: size (in bytes) of register buffer
 572  *
 573  * If the provided register buffer isn't large enough for the chip's
 574  * full register range, the register dump will be truncated to the
 575  * register buffer's size.
 576  */
 577 void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 578 {
 579         static const unsigned int t5_reg_ranges[] = {
 580                 0x1008, 0x10c0,
 581                 0x10cc, 0x10f8,
 582                 0x1100, 0x1100,
 583                 0x110c, 0x1148,
 584                 0x1180, 0x1184,
 585                 0x1190, 0x1194,
 586                 0x11a0, 0x11a4,
 587                 0x11b0, 0x11b4,
 588                 0x11fc, 0x123c,
 589                 0x1280, 0x173c,
 590                 0x1800, 0x18fc,
 591                 0x3000, 0x3028,
 592                 0x3060, 0x30b0,
 593                 0x30b8, 0x30d8,
 594                 0x30e0, 0x30fc,
 595                 0x3140, 0x357c,
 596                 0x35a8, 0x35cc,
 597                 0x35ec, 0x35ec,
 598                 0x3600, 0x5624,
 599                 0x56cc, 0x56ec,
 600                 0x56f4, 0x5720,
 601                 0x5728, 0x575c,
 602                 0x580c, 0x5814,
 603                 0x5890, 0x589c,
 604                 0x58a4, 0x58ac,
 605                 0x58b8, 0x58bc,
 606                 0x5940, 0x59c8,
 607                 0x59d0, 0x59dc,
 608                 0x59fc, 0x5a18,
 609                 0x5a60, 0x5a70,
 610                 0x5a80, 0x5a9c,
 611                 0x5b94, 0x5bfc,
 612                 0x6000, 0x6020,
 613                 0x6028, 0x6040,
 614                 0x6058, 0x609c,
 615                 0x60a8, 0x614c,
 616                 0x7700, 0x7798,
 617                 0x77c0, 0x78fc,
 618                 0x7b00, 0x7b58,
 619                 0x7b60, 0x7b84,
 620                 0x7b8c, 0x7c54,
 621                 0x7d00, 0x7d38,
 622                 0x7d40, 0x7d80,
 623                 0x7d8c, 0x7ddc,
 624                 0x7de4, 0x7e04,
 625                 0x7e10, 0x7e1c,
 626                 0x7e24, 0x7e38,
 627                 0x7e40, 0x7e44,
 628                 0x7e4c, 0x7e78,
 629                 0x7e80, 0x7edc,
 630                 0x7ee8, 0x7efc,
 631                 0x8dc0, 0x8de0,
 632                 0x8df8, 0x8e04,
 633                 0x8e10, 0x8e84,
 634                 0x8ea0, 0x8f84,
 635                 0x8fc0, 0x9058,
 636                 0x9060, 0x9060,
 637                 0x9068, 0x90f8,
 638                 0x9400, 0x9408,
 639                 0x9410, 0x9470,
 640                 0x9600, 0x9600,
 641                 0x9608, 0x9638,
 642                 0x9640, 0x96f4,
 643                 0x9800, 0x9808,
 644                 0x9820, 0x983c,
 645                 0x9850, 0x9864,
 646                 0x9c00, 0x9c6c,
 647                 0x9c80, 0x9cec,
 648                 0x9d00, 0x9d6c,
 649                 0x9d80, 0x9dec,
 650                 0x9e00, 0x9e6c,
 651                 0x9e80, 0x9eec,
 652                 0x9f00, 0x9f6c,
 653                 0x9f80, 0xa020,
 654                 0xd004, 0xd004,
 655                 0xd010, 0xd03c,
 656                 0xdfc0, 0xdfe0,
 657                 0xe000, 0x1106c,
 658                 0x11074, 0x11088,
 659                 0x1109c, 0x1117c,
 660                 0x11190, 0x11204,
 661                 0x19040, 0x1906c,
 662                 0x19078, 0x19080,
 663                 0x1908c, 0x190e8,
 664                 0x190f0, 0x190f8,
 665                 0x19100, 0x19110,
 666                 0x19120, 0x19124,
 667                 0x19150, 0x19194,
 668                 0x1919c, 0x191b0,
 669                 0x191d0, 0x191e8,
 670                 0x19238, 0x19290,
 671                 0x193f8, 0x19428,
 672                 0x19430, 0x19444,
 673                 0x1944c, 0x1946c,
 674                 0x19474, 0x19474,
 675                 0x19490, 0x194cc,
 676                 0x194f0, 0x194f8,
 677                 0x19c00, 0x19c08,
 678                 0x19c10, 0x19c60,
 679                 0x19c94, 0x19ce4,
 680                 0x19cf0, 0x19d40,
 681                 0x19d50, 0x19d94,
 682                 0x19da0, 0x19de8,
 683                 0x19df0, 0x19e10,
 684                 0x19e50, 0x19e90,
 685                 0x19ea0, 0x19f24,
 686                 0x19f34, 0x19f34,
 687                 0x19f40, 0x19f50,
 688                 0x19f90, 0x19fb4,
 689                 0x19fc4, 0x19fe4,
 690                 0x1a000, 0x1a004,
 691                 0x1a010, 0x1a06c,
 692                 0x1a0b0, 0x1a0e4,
 693                 0x1a0ec, 0x1a0f8,
 694                 0x1a100, 0x1a108,
 695                 0x1a114, 0x1a120,
 696                 0x1a128, 0x1a130,
 697                 0x1a138, 0x1a138,
 698                 0x1a190, 0x1a1c4,
 699                 0x1a1fc, 0x1a1fc,
 700                 0x1e008, 0x1e00c,
 701                 0x1e040, 0x1e044,
 702                 0x1e04c, 0x1e04c,
 703                 0x1e284, 0x1e290,
 704                 0x1e2c0, 0x1e2c0,
 705                 0x1e2e0, 0x1e2e0,
 706                 0x1e300, 0x1e384,
 707                 0x1e3c0, 0x1e3c8,
 708                 0x1e408, 0x1e40c,
 709                 0x1e440, 0x1e444,
 710                 0x1e44c, 0x1e44c,
 711                 0x1e684, 0x1e690,
 712                 0x1e6c0, 0x1e6c0,
 713                 0x1e6e0, 0x1e6e0,
 714                 0x1e700, 0x1e784,
 715                 0x1e7c0, 0x1e7c8,
 716                 0x1e808, 0x1e80c,
 717                 0x1e840, 0x1e844,
 718                 0x1e84c, 0x1e84c,
 719                 0x1ea84, 0x1ea90,
 720                 0x1eac0, 0x1eac0,
 721                 0x1eae0, 0x1eae0,
 722                 0x1eb00, 0x1eb84,
 723                 0x1ebc0, 0x1ebc8,
 724                 0x1ec08, 0x1ec0c,
 725                 0x1ec40, 0x1ec44,
 726                 0x1ec4c, 0x1ec4c,
 727                 0x1ee84, 0x1ee90,
 728                 0x1eec0, 0x1eec0,
 729                 0x1eee0, 0x1eee0,
 730                 0x1ef00, 0x1ef84,
 731                 0x1efc0, 0x1efc8,
 732                 0x1f008, 0x1f00c,
 733                 0x1f040, 0x1f044,
 734                 0x1f04c, 0x1f04c,
 735                 0x1f284, 0x1f290,
 736                 0x1f2c0, 0x1f2c0,
 737                 0x1f2e0, 0x1f2e0,
 738                 0x1f300, 0x1f384,
 739                 0x1f3c0, 0x1f3c8,
 740                 0x1f408, 0x1f40c,
 741                 0x1f440, 0x1f444,
 742                 0x1f44c, 0x1f44c,
 743                 0x1f684, 0x1f690,
 744                 0x1f6c0, 0x1f6c0,
 745                 0x1f6e0, 0x1f6e0,
 746                 0x1f700, 0x1f784,
 747                 0x1f7c0, 0x1f7c8,
 748                 0x1f808, 0x1f80c,
 749                 0x1f840, 0x1f844,
 750                 0x1f84c, 0x1f84c,
 751                 0x1fa84, 0x1fa90,
 752                 0x1fac0, 0x1fac0,
 753                 0x1fae0, 0x1fae0,
 754                 0x1fb00, 0x1fb84,
 755                 0x1fbc0, 0x1fbc8,
 756                 0x1fc08, 0x1fc0c,
 757                 0x1fc40, 0x1fc44,
 758                 0x1fc4c, 0x1fc4c,
 759                 0x1fe84, 0x1fe90,
 760                 0x1fec0, 0x1fec0,
 761                 0x1fee0, 0x1fee0,
 762                 0x1ff00, 0x1ff84,
 763                 0x1ffc0, 0x1ffc8,
 764                 0x30000, 0x30030,
 765                 0x30038, 0x30038,
 766                 0x30040, 0x30040,
 767                 0x30100, 0x30144,
 768                 0x30190, 0x301a0,
 769                 0x301a8, 0x301b8,
 770                 0x301c4, 0x301c8,
 771                 0x301d0, 0x301d0,
 772                 0x30200, 0x30318,
 773                 0x30400, 0x304b4,
 774                 0x304c0, 0x3052c,
 775                 0x30540, 0x3061c,
 776                 0x30800, 0x30828,
 777                 0x30834, 0x30834,
 778                 0x308c0, 0x30908,
 779                 0x30910, 0x309ac,
 780                 0x30a00, 0x30a14,
 781                 0x30a1c, 0x30a2c,
 782                 0x30a44, 0x30a50,
 783                 0x30a74, 0x30a74,
 784                 0x30a7c, 0x30afc,
 785                 0x30b08, 0x30c24,
 786                 0x30d00, 0x30d00,
 787                 0x30d08, 0x30d14,
 788                 0x30d1c, 0x30d20,
 789                 0x30d3c, 0x30d3c,
 790                 0x30d48, 0x30d50,
 791                 0x31200, 0x3120c,
 792                 0x31220, 0x31220,
 793                 0x31240, 0x31240,
 794                 0x31600, 0x3160c,
 795                 0x31a00, 0x31a1c,
 796                 0x31e00, 0x31e20,
 797                 0x31e38, 0x31e3c,
 798                 0x31e80, 0x31e80,
 799                 0x31e88, 0x31ea8,
 800                 0x31eb0, 0x31eb4,
 801                 0x31ec8, 0x31ed4,
 802                 0x31fb8, 0x32004,
 803                 0x32200, 0x32200,
 804                 0x32208, 0x32240,
 805                 0x32248, 0x32280,
 806                 0x32288, 0x322c0,
 807                 0x322c8, 0x322fc,
 808                 0x32600, 0x32630,
 809                 0x32a00, 0x32abc,
 810                 0x32b00, 0x32b10,
 811                 0x32b20, 0x32b30,
 812                 0x32b40, 0x32b50,
 813                 0x32b60, 0x32b70,
 814                 0x33000, 0x33028,
 815                 0x33030, 0x33048,
 816                 0x33060, 0x33068,
 817                 0x33070, 0x3309c,
 818                 0x330f0, 0x33128,
 819                 0x33130, 0x33148,
 820                 0x33160, 0x33168,
 821                 0x33170, 0x3319c,
 822                 0x331f0, 0x33238,
 823                 0x33240, 0x33240,
 824                 0x33248, 0x33250,
 825                 0x3325c, 0x33264,
 826                 0x33270, 0x332b8,
 827                 0x332c0, 0x332e4,
 828                 0x332f8, 0x33338,
 829                 0x33340, 0x33340,
 830                 0x33348, 0x33350,
 831                 0x3335c, 0x33364,
 832                 0x33370, 0x333b8,
 833                 0x333c0, 0x333e4,
 834                 0x333f8, 0x33428,
 835                 0x33430, 0x33448,
 836                 0x33460, 0x33468,
 837                 0x33470, 0x3349c,
 838                 0x334f0, 0x33528,
 839                 0x33530, 0x33548,
 840                 0x33560, 0x33568,
 841                 0x33570, 0x3359c,
 842                 0x335f0, 0x33638,
 843                 0x33640, 0x33640,
 844                 0x33648, 0x33650,
 845                 0x3365c, 0x33664,
 846                 0x33670, 0x336b8,
 847                 0x336c0, 0x336e4,
 848                 0x336f8, 0x33738,
 849                 0x33740, 0x33740,
 850                 0x33748, 0x33750,
 851                 0x3375c, 0x33764,
 852                 0x33770, 0x337b8,
 853                 0x337c0, 0x337e4,
 854                 0x337f8, 0x337fc,
 855                 0x33814, 0x33814,
 856                 0x3382c, 0x3382c,
 857                 0x33880, 0x3388c,
 858                 0x338e8, 0x338ec,
 859                 0x33900, 0x33928,
 860                 0x33930, 0x33948,
 861                 0x33960, 0x33968,
 862                 0x33970, 0x3399c,
 863                 0x339f0, 0x33a38,
 864                 0x33a40, 0x33a40,
 865                 0x33a48, 0x33a50,
 866                 0x33a5c, 0x33a64,
 867                 0x33a70, 0x33ab8,
 868                 0x33ac0, 0x33ae4,
 869                 0x33af8, 0x33b10,
 870                 0x33b28, 0x33b28,
 871                 0x33b3c, 0x33b50,
 872                 0x33bf0, 0x33c10,
 873                 0x33c28, 0x33c28,
 874                 0x33c3c, 0x33c50,
 875                 0x33cf0, 0x33cfc,
 876                 0x34000, 0x34030,
 877                 0x34038, 0x34038,
 878                 0x34040, 0x34040,
 879                 0x34100, 0x34144,
 880                 0x34190, 0x341a0,
 881                 0x341a8, 0x341b8,
 882                 0x341c4, 0x341c8,
 883                 0x341d0, 0x341d0,
 884                 0x34200, 0x34318,
 885                 0x34400, 0x344b4,
 886                 0x344c0, 0x3452c,
 887                 0x34540, 0x3461c,
 888                 0x34800, 0x34828,
 889                 0x34834, 0x34834,
 890                 0x348c0, 0x34908,
 891                 0x34910, 0x349ac,
 892                 0x34a00, 0x34a14,
 893                 0x34a1c, 0x34a2c,
 894                 0x34a44, 0x34a50,
 895                 0x34a74, 0x34a74,
 896                 0x34a7c, 0x34afc,
 897                 0x34b08, 0x34c24,
 898                 0x34d00, 0x34d00,
 899                 0x34d08, 0x34d14,
 900                 0x34d1c, 0x34d20,
 901                 0x34d3c, 0x34d3c,
 902                 0x34d48, 0x34d50,
 903                 0x35200, 0x3520c,
 904                 0x35220, 0x35220,
 905                 0x35240, 0x35240,
 906                 0x35600, 0x3560c,
 907                 0x35a00, 0x35a1c,
 908                 0x35e00, 0x35e20,
 909                 0x35e38, 0x35e3c,
 910                 0x35e80, 0x35e80,
 911                 0x35e88, 0x35ea8,
 912                 0x35eb0, 0x35eb4,
 913                 0x35ec8, 0x35ed4,
 914                 0x35fb8, 0x36004,
 915                 0x36200, 0x36200,
 916                 0x36208, 0x36240,
 917                 0x36248, 0x36280,
 918                 0x36288, 0x362c0,
 919                 0x362c8, 0x362fc,
 920                 0x36600, 0x36630,
 921                 0x36a00, 0x36abc,
 922                 0x36b00, 0x36b10,
 923                 0x36b20, 0x36b30,
 924                 0x36b40, 0x36b50,
 925                 0x36b60, 0x36b70,
 926                 0x37000, 0x37028,
 927                 0x37030, 0x37048,
 928                 0x37060, 0x37068,
 929                 0x37070, 0x3709c,
 930                 0x370f0, 0x37128,
 931                 0x37130, 0x37148,
 932                 0x37160, 0x37168,
 933                 0x37170, 0x3719c,
 934                 0x371f0, 0x37238,
 935                 0x37240, 0x37240,
 936                 0x37248, 0x37250,
 937                 0x3725c, 0x37264,
 938                 0x37270, 0x372b8,
 939                 0x372c0, 0x372e4,
 940                 0x372f8, 0x37338,
 941                 0x37340, 0x37340,
 942                 0x37348, 0x37350,
 943                 0x3735c, 0x37364,
 944                 0x37370, 0x373b8,
 945                 0x373c0, 0x373e4,
 946                 0x373f8, 0x37428,
 947                 0x37430, 0x37448,
 948                 0x37460, 0x37468,
 949                 0x37470, 0x3749c,
 950                 0x374f0, 0x37528,
 951                 0x37530, 0x37548,
 952                 0x37560, 0x37568,
 953                 0x37570, 0x3759c,
 954                 0x375f0, 0x37638,
 955                 0x37640, 0x37640,
 956                 0x37648, 0x37650,
 957                 0x3765c, 0x37664,
 958                 0x37670, 0x376b8,
 959                 0x376c0, 0x376e4,
 960                 0x376f8, 0x37738,
 961                 0x37740, 0x37740,
 962                 0x37748, 0x37750,
 963                 0x3775c, 0x37764,
 964                 0x37770, 0x377b8,
 965                 0x377c0, 0x377e4,
 966                 0x377f8, 0x377fc,
 967                 0x37814, 0x37814,
 968                 0x3782c, 0x3782c,
 969                 0x37880, 0x3788c,
 970                 0x378e8, 0x378ec,
 971                 0x37900, 0x37928,
 972                 0x37930, 0x37948,
 973                 0x37960, 0x37968,
 974                 0x37970, 0x3799c,
 975                 0x379f0, 0x37a38,
 976                 0x37a40, 0x37a40,
 977                 0x37a48, 0x37a50,
 978                 0x37a5c, 0x37a64,
 979                 0x37a70, 0x37ab8,
 980                 0x37ac0, 0x37ae4,
 981                 0x37af8, 0x37b10,
 982                 0x37b28, 0x37b28,
 983                 0x37b3c, 0x37b50,
 984                 0x37bf0, 0x37c10,
 985                 0x37c28, 0x37c28,
 986                 0x37c3c, 0x37c50,
 987                 0x37cf0, 0x37cfc,
 988                 0x38000, 0x38030,
 989                 0x38038, 0x38038,
 990                 0x38040, 0x38040,
 991                 0x38100, 0x38144,
 992                 0x38190, 0x381a0,
 993                 0x381a8, 0x381b8,
 994                 0x381c4, 0x381c8,
 995                 0x381d0, 0x381d0,
 996                 0x38200, 0x38318,
 997                 0x38400, 0x384b4,
 998                 0x384c0, 0x3852c,
 999                 0x38540, 0x3861c,
1000                 0x38800, 0x38828,
1001                 0x38834, 0x38834,
1002                 0x388c0, 0x38908,
1003                 0x38910, 0x389ac,
1004                 0x38a00, 0x38a14,
1005                 0x38a1c, 0x38a2c,
1006                 0x38a44, 0x38a50,
1007                 0x38a74, 0x38a74,
1008                 0x38a7c, 0x38afc,
1009                 0x38b08, 0x38c24,
1010                 0x38d00, 0x38d00,
1011                 0x38d08, 0x38d14,
1012                 0x38d1c, 0x38d20,
1013                 0x38d3c, 0x38d3c,
1014                 0x38d48, 0x38d50,
1015                 0x39200, 0x3920c,
1016                 0x39220, 0x39220,
1017                 0x39240, 0x39240,
1018                 0x39600, 0x3960c,
1019                 0x39a00, 0x39a1c,
1020                 0x39e00, 0x39e20,
1021                 0x39e38, 0x39e3c,
1022                 0x39e80, 0x39e80,
1023                 0x39e88, 0x39ea8,
1024                 0x39eb0, 0x39eb4,
1025                 0x39ec8, 0x39ed4,
1026                 0x39fb8, 0x3a004,
1027                 0x3a200, 0x3a200,
1028                 0x3a208, 0x3a240,
1029                 0x3a248, 0x3a280,
1030                 0x3a288, 0x3a2c0,
1031                 0x3a2c8, 0x3a2fc,
1032                 0x3a600, 0x3a630,
1033                 0x3aa00, 0x3aabc,
1034                 0x3ab00, 0x3ab10,
1035                 0x3ab20, 0x3ab30,
1036                 0x3ab40, 0x3ab50,
1037                 0x3ab60, 0x3ab70,
1038                 0x3b000, 0x3b028,
1039                 0x3b030, 0x3b048,
1040                 0x3b060, 0x3b068,
1041                 0x3b070, 0x3b09c,
1042                 0x3b0f0, 0x3b128,
1043                 0x3b130, 0x3b148,
1044                 0x3b160, 0x3b168,
1045                 0x3b170, 0x3b19c,
1046                 0x3b1f0, 0x3b238,
1047                 0x3b240, 0x3b240,
1048                 0x3b248, 0x3b250,
1049                 0x3b25c, 0x3b264,
1050                 0x3b270, 0x3b2b8,
1051                 0x3b2c0, 0x3b2e4,
1052                 0x3b2f8, 0x3b338,
1053                 0x3b340, 0x3b340,
1054                 0x3b348, 0x3b350,
1055                 0x3b35c, 0x3b364,
1056                 0x3b370, 0x3b3b8,
1057                 0x3b3c0, 0x3b3e4,
1058                 0x3b3f8, 0x3b428,
1059                 0x3b430, 0x3b448,
1060                 0x3b460, 0x3b468,
1061                 0x3b470, 0x3b49c,
1062                 0x3b4f0, 0x3b528,
1063                 0x3b530, 0x3b548,
1064                 0x3b560, 0x3b568,
1065                 0x3b570, 0x3b59c,
1066                 0x3b5f0, 0x3b638,
1067                 0x3b640, 0x3b640,
1068                 0x3b648, 0x3b650,
1069                 0x3b65c, 0x3b664,
1070                 0x3b670, 0x3b6b8,
1071                 0x3b6c0, 0x3b6e4,
1072                 0x3b6f8, 0x3b738,
1073                 0x3b740, 0x3b740,
1074                 0x3b748, 0x3b750,
1075                 0x3b75c, 0x3b764,
1076                 0x3b770, 0x3b7b8,
1077                 0x3b7c0, 0x3b7e4,
1078                 0x3b7f8, 0x3b7fc,
1079                 0x3b814, 0x3b814,
1080                 0x3b82c, 0x3b82c,
1081                 0x3b880, 0x3b88c,
1082                 0x3b8e8, 0x3b8ec,
1083                 0x3b900, 0x3b928,
1084                 0x3b930, 0x3b948,
1085                 0x3b960, 0x3b968,
1086                 0x3b970, 0x3b99c,
1087                 0x3b9f0, 0x3ba38,
1088                 0x3ba40, 0x3ba40,
1089                 0x3ba48, 0x3ba50,
1090                 0x3ba5c, 0x3ba64,
1091                 0x3ba70, 0x3bab8,
1092                 0x3bac0, 0x3bae4,
1093                 0x3baf8, 0x3bb10,
1094                 0x3bb28, 0x3bb28,
1095                 0x3bb3c, 0x3bb50,
1096                 0x3bbf0, 0x3bc10,
1097                 0x3bc28, 0x3bc28,
1098                 0x3bc3c, 0x3bc50,
1099                 0x3bcf0, 0x3bcfc,
1100                 0x3c000, 0x3c030,
1101                 0x3c038, 0x3c038,
1102                 0x3c040, 0x3c040,
1103                 0x3c100, 0x3c144,
1104                 0x3c190, 0x3c1a0,
1105                 0x3c1a8, 0x3c1b8,
1106                 0x3c1c4, 0x3c1c8,
1107                 0x3c1d0, 0x3c1d0,
1108                 0x3c200, 0x3c318,
1109                 0x3c400, 0x3c4b4,
1110                 0x3c4c0, 0x3c52c,
1111                 0x3c540, 0x3c61c,
1112                 0x3c800, 0x3c828,
1113                 0x3c834, 0x3c834,
1114                 0x3c8c0, 0x3c908,
1115                 0x3c910, 0x3c9ac,
1116                 0x3ca00, 0x3ca14,
1117                 0x3ca1c, 0x3ca2c,
1118                 0x3ca44, 0x3ca50,
1119                 0x3ca74, 0x3ca74,
1120                 0x3ca7c, 0x3cafc,
1121                 0x3cb08, 0x3cc24,
1122                 0x3cd00, 0x3cd00,
1123                 0x3cd08, 0x3cd14,
1124                 0x3cd1c, 0x3cd20,
1125                 0x3cd3c, 0x3cd3c,
1126                 0x3cd48, 0x3cd50,
1127                 0x3d200, 0x3d20c,
1128                 0x3d220, 0x3d220,
1129                 0x3d240, 0x3d240,
1130                 0x3d600, 0x3d60c,
1131                 0x3da00, 0x3da1c,
1132                 0x3de00, 0x3de20,
1133                 0x3de38, 0x3de3c,
1134                 0x3de80, 0x3de80,
1135                 0x3de88, 0x3dea8,
1136                 0x3deb0, 0x3deb4,
1137                 0x3dec8, 0x3ded4,
1138                 0x3dfb8, 0x3e004,
1139                 0x3e200, 0x3e200,
1140                 0x3e208, 0x3e240,
1141                 0x3e248, 0x3e280,
1142                 0x3e288, 0x3e2c0,
1143                 0x3e2c8, 0x3e2fc,
1144                 0x3e600, 0x3e630,
1145                 0x3ea00, 0x3eabc,
1146                 0x3eb00, 0x3eb10,
1147                 0x3eb20, 0x3eb30,
1148                 0x3eb40, 0x3eb50,
1149                 0x3eb60, 0x3eb70,
1150                 0x3f000, 0x3f028,
1151                 0x3f030, 0x3f048,
1152                 0x3f060, 0x3f068,
1153                 0x3f070, 0x3f09c,
1154                 0x3f0f0, 0x3f128,
1155                 0x3f130, 0x3f148,
1156                 0x3f160, 0x3f168,
1157                 0x3f170, 0x3f19c,
1158                 0x3f1f0, 0x3f238,
1159                 0x3f240, 0x3f240,
1160                 0x3f248, 0x3f250,
1161                 0x3f25c, 0x3f264,
1162                 0x3f270, 0x3f2b8,
1163                 0x3f2c0, 0x3f2e4,
1164                 0x3f2f8, 0x3f338,
1165                 0x3f340, 0x3f340,
1166                 0x3f348, 0x3f350,
1167                 0x3f35c, 0x3f364,
1168                 0x3f370, 0x3f3b8,
1169                 0x3f3c0, 0x3f3e4,
1170                 0x3f3f8, 0x3f428,
1171                 0x3f430, 0x3f448,
1172                 0x3f460, 0x3f468,
1173                 0x3f470, 0x3f49c,
1174                 0x3f4f0, 0x3f528,
1175                 0x3f530, 0x3f548,
1176                 0x3f560, 0x3f568,
1177                 0x3f570, 0x3f59c,
1178                 0x3f5f0, 0x3f638,
1179                 0x3f640, 0x3f640,
1180                 0x3f648, 0x3f650,
1181                 0x3f65c, 0x3f664,
1182                 0x3f670, 0x3f6b8,
1183                 0x3f6c0, 0x3f6e4,
1184                 0x3f6f8, 0x3f738,
1185                 0x3f740, 0x3f740,
1186                 0x3f748, 0x3f750,
1187                 0x3f75c, 0x3f764,
1188                 0x3f770, 0x3f7b8,
1189                 0x3f7c0, 0x3f7e4,
1190                 0x3f7f8, 0x3f7fc,
1191                 0x3f814, 0x3f814,
1192                 0x3f82c, 0x3f82c,
1193                 0x3f880, 0x3f88c,
1194                 0x3f8e8, 0x3f8ec,
1195                 0x3f900, 0x3f928,
1196                 0x3f930, 0x3f948,
1197                 0x3f960, 0x3f968,
1198                 0x3f970, 0x3f99c,
1199                 0x3f9f0, 0x3fa38,
1200                 0x3fa40, 0x3fa40,
1201                 0x3fa48, 0x3fa50,
1202                 0x3fa5c, 0x3fa64,
1203                 0x3fa70, 0x3fab8,
1204                 0x3fac0, 0x3fae4,
1205                 0x3faf8, 0x3fb10,
1206                 0x3fb28, 0x3fb28,
1207                 0x3fb3c, 0x3fb50,
1208                 0x3fbf0, 0x3fc10,
1209                 0x3fc28, 0x3fc28,
1210                 0x3fc3c, 0x3fc50,
1211                 0x3fcf0, 0x3fcfc,
1212                 0x40000, 0x4000c,
1213                 0x40040, 0x40050,
1214                 0x40060, 0x40068,
1215                 0x4007c, 0x4008c,
1216                 0x40094, 0x400b0,
1217                 0x400c0, 0x40144,
1218                 0x40180, 0x4018c,
1219                 0x40200, 0x40254,
1220                 0x40260, 0x40264,
1221                 0x40270, 0x40288,
1222                 0x40290, 0x40298,
1223                 0x402ac, 0x402c8,
1224                 0x402d0, 0x402e0,
1225                 0x402f0, 0x402f0,
1226                 0x40300, 0x4033c,
1227                 0x403f8, 0x403fc,
1228                 0x41304, 0x413c4,
1229                 0x41400, 0x4140c,
1230                 0x41414, 0x4141c,
1231                 0x41480, 0x414d0,
1232                 0x44000, 0x44054,
1233                 0x4405c, 0x44078,
1234                 0x440c0, 0x44174,
1235                 0x44180, 0x441ac,
1236                 0x441b4, 0x441b8,
1237                 0x441c0, 0x44254,
1238                 0x4425c, 0x44278,
1239                 0x442c0, 0x44374,
1240                 0x44380, 0x443ac,
1241                 0x443b4, 0x443b8,
1242                 0x443c0, 0x44454,
1243                 0x4445c, 0x44478,
1244                 0x444c0, 0x44574,
1245                 0x44580, 0x445ac,
1246                 0x445b4, 0x445b8,
1247                 0x445c0, 0x44654,
1248                 0x4465c, 0x44678,
1249                 0x446c0, 0x44774,
1250                 0x44780, 0x447ac,
1251                 0x447b4, 0x447b8,
1252                 0x447c0, 0x44854,
1253                 0x4485c, 0x44878,
1254                 0x448c0, 0x44974,
1255                 0x44980, 0x449ac,
1256                 0x449b4, 0x449b8,
1257                 0x449c0, 0x449fc,
1258                 0x45000, 0x45004,
1259                 0x45010, 0x45030,
1260                 0x45040, 0x45060,
1261                 0x45068, 0x45068,
1262                 0x45080, 0x45084,
1263                 0x450a0, 0x450b0,
1264                 0x45200, 0x45204,
1265                 0x45210, 0x45230,
1266                 0x45240, 0x45260,
1267                 0x45268, 0x45268,
1268                 0x45280, 0x45284,
1269                 0x452a0, 0x452b0,
1270                 0x460c0, 0x460e4,
1271                 0x47000, 0x4703c,
1272                 0x47044, 0x4708c,
1273                 0x47200, 0x47250,
1274                 0x47400, 0x47408,
1275                 0x47414, 0x47420,
1276                 0x47600, 0x47618,
1277                 0x47800, 0x47814,
1278                 0x48000, 0x4800c,
1279                 0x48040, 0x48050,
1280                 0x48060, 0x48068,
1281                 0x4807c, 0x4808c,
1282                 0x48094, 0x480b0,
1283                 0x480c0, 0x48144,
1284                 0x48180, 0x4818c,
1285                 0x48200, 0x48254,
1286                 0x48260, 0x48264,
1287                 0x48270, 0x48288,
1288                 0x48290, 0x48298,
1289                 0x482ac, 0x482c8,
1290                 0x482d0, 0x482e0,
1291                 0x482f0, 0x482f0,
1292                 0x48300, 0x4833c,
1293                 0x483f8, 0x483fc,
1294                 0x49304, 0x493c4,
1295                 0x49400, 0x4940c,
1296                 0x49414, 0x4941c,
1297                 0x49480, 0x494d0,
1298                 0x4c000, 0x4c054,
1299                 0x4c05c, 0x4c078,
1300                 0x4c0c0, 0x4c174,
1301                 0x4c180, 0x4c1ac,
1302                 0x4c1b4, 0x4c1b8,
1303                 0x4c1c0, 0x4c254,
1304                 0x4c25c, 0x4c278,
1305                 0x4c2c0, 0x4c374,
1306                 0x4c380, 0x4c3ac,
1307                 0x4c3b4, 0x4c3b8,
1308                 0x4c3c0, 0x4c454,
1309                 0x4c45c, 0x4c478,
1310                 0x4c4c0, 0x4c574,
1311                 0x4c580, 0x4c5ac,
1312                 0x4c5b4, 0x4c5b8,
1313                 0x4c5c0, 0x4c654,
1314                 0x4c65c, 0x4c678,
1315                 0x4c6c0, 0x4c774,
1316                 0x4c780, 0x4c7ac,
1317                 0x4c7b4, 0x4c7b8,
1318                 0x4c7c0, 0x4c854,
1319                 0x4c85c, 0x4c878,
1320                 0x4c8c0, 0x4c974,
1321                 0x4c980, 0x4c9ac,
1322                 0x4c9b4, 0x4c9b8,
1323                 0x4c9c0, 0x4c9fc,
1324                 0x4d000, 0x4d004,
1325                 0x4d010, 0x4d030,
1326                 0x4d040, 0x4d060,
1327                 0x4d068, 0x4d068,
1328                 0x4d080, 0x4d084,
1329                 0x4d0a0, 0x4d0b0,
1330                 0x4d200, 0x4d204,
1331                 0x4d210, 0x4d230,
1332                 0x4d240, 0x4d260,
1333                 0x4d268, 0x4d268,
1334                 0x4d280, 0x4d284,
1335                 0x4d2a0, 0x4d2b0,
1336                 0x4e0c0, 0x4e0e4,
1337                 0x4f000, 0x4f03c,
1338                 0x4f044, 0x4f08c,
1339                 0x4f200, 0x4f250,
1340                 0x4f400, 0x4f408,
1341                 0x4f414, 0x4f420,
1342                 0x4f600, 0x4f618,
1343                 0x4f800, 0x4f814,
1344                 0x50000, 0x50084,
1345                 0x50090, 0x500cc,
1346                 0x50400, 0x50400,
1347                 0x50800, 0x50884,
1348                 0x50890, 0x508cc,
1349                 0x50c00, 0x50c00,
1350                 0x51000, 0x5101c,
1351                 0x51300, 0x51308,
1352         };
1353
1354         static const unsigned int t6_reg_ranges[] = {
1355                 0x1008, 0x101c,
1356                 0x1024, 0x10a8,
1357                 0x10b4, 0x10f8,
1358                 0x1100, 0x1114,
1359                 0x111c, 0x112c,
1360                 0x1138, 0x113c,
1361                 0x1144, 0x114c,
1362                 0x1180, 0x1184,
1363                 0x1190, 0x1194,
1364                 0x11a0, 0x11a4,
1365                 0x11b0, 0x11b4,
1366                 0x11fc, 0x1274,
1367                 0x1280, 0x133c,
1368                 0x1800, 0x18fc,
1369                 0x3000, 0x302c,
1370                 0x3060, 0x30b0,
1371                 0x30b8, 0x30d8,
1372                 0x30e0, 0x30fc,
1373                 0x3140, 0x357c,
1374                 0x35a8, 0x35cc,
1375                 0x35ec, 0x35ec,
1376                 0x3600, 0x5624,
1377                 0x56cc, 0x56ec,
1378                 0x56f4, 0x5720,
1379                 0x5728, 0x575c,
1380                 0x580c, 0x5814,
1381                 0x5890, 0x589c,
1382                 0x58a4, 0x58ac,
1383                 0x58b8, 0x58bc,
1384                 0x5940, 0x595c,
1385                 0x5980, 0x598c,
1386                 0x59b0, 0x59c8,
1387                 0x59d0, 0x59dc,
1388                 0x59fc, 0x5a18,
1389                 0x5a60, 0x5a6c,
1390                 0x5a80, 0x5a8c,
1391                 0x5a94, 0x5a9c,
1392                 0x5b94, 0x5bfc,
1393                 0x5c10, 0x5e48,
1394                 0x5e50, 0x5e94,
1395                 0x5ea0, 0x5eb0,
1396                 0x5ec0, 0x5ec0,
1397                 0x5ec8, 0x5ed0,
1398                 0x5ee0, 0x5ee0,
1399                 0x5ef0, 0x5ef0,
1400                 0x5f00, 0x5f00,
1401                 0x6000, 0x6020,
1402                 0x6028, 0x6040,
1403                 0x6058, 0x609c,
1404                 0x60a8, 0x619c,
1405                 0x7700, 0x7798,
1406                 0x77c0, 0x7880,
1407                 0x78cc, 0x78fc,
1408                 0x7b00, 0x7b58,
1409                 0x7b60, 0x7b84,
1410                 0x7b8c, 0x7c54,
1411                 0x7d00, 0x7d38,
1412                 0x7d40, 0x7d84,
1413                 0x7d8c, 0x7ddc,
1414                 0x7de4, 0x7e04,
1415                 0x7e10, 0x7e1c,
1416                 0x7e24, 0x7e38,
1417                 0x7e40, 0x7e44,
1418                 0x7e4c, 0x7e78,
1419                 0x7e80, 0x7edc,
1420                 0x7ee8, 0x7efc,
1421                 0x8dc0, 0x8de4,
1422                 0x8df8, 0x8e04,
1423                 0x8e10, 0x8e84,
1424                 0x8ea0, 0x8f88,
1425                 0x8fb8, 0x9058,
1426                 0x9060, 0x9060,
1427                 0x9068, 0x90f8,
1428                 0x9100, 0x9124,
1429                 0x9400, 0x9470,
1430                 0x9600, 0x9600,
1431                 0x9608, 0x9638,
1432                 0x9640, 0x9704,
1433                 0x9710, 0x971c,
1434                 0x9800, 0x9808,
1435                 0x9820, 0x983c,
1436                 0x9850, 0x9864,
1437                 0x9c00, 0x9c6c,
1438                 0x9c80, 0x9cec,
1439                 0x9d00, 0x9d6c,
1440                 0x9d80, 0x9dec,
1441                 0x9e00, 0x9e6c,
1442                 0x9e80, 0x9eec,
1443                 0x9f00, 0x9f6c,
1444                 0x9f80, 0xa020,
1445                 0xd004, 0xd03c,
1446                 0xd100, 0xd118,
1447                 0xd200, 0xd214,
1448                 0xd220, 0xd234,
1449                 0xd240, 0xd254,
1450                 0xd260, 0xd274,
1451                 0xd280, 0xd294,
1452                 0xd2a0, 0xd2b4,
1453                 0xd2c0, 0xd2d4,
1454                 0xd2e0, 0xd2f4,
1455                 0xd300, 0xd31c,
1456                 0xdfc0, 0xdfe0,
1457                 0xe000, 0xf008,
1458                 0xf010, 0xf018,
1459                 0xf020, 0xf028,
1460                 0x11000, 0x11014,
1461                 0x11048, 0x1106c,
1462                 0x11074, 0x11088,
1463                 0x11098, 0x11120,
1464                 0x1112c, 0x1117c,
1465                 0x11190, 0x112e0,
1466                 0x11300, 0x1130c,
1467                 0x12000, 0x1206c,
1468                 0x19040, 0x1906c,
1469                 0x19078, 0x19080,
1470                 0x1908c, 0x190e8,
1471                 0x190f0, 0x190f8,
1472                 0x19100, 0x19110,
1473                 0x19120, 0x19124,
1474                 0x19150, 0x19194,
1475                 0x1919c, 0x191b0,
1476                 0x191d0, 0x191e8,
1477                 0x19238, 0x19290,
1478                 0x192a4, 0x192b0,
1479                 0x192bc, 0x192bc,
1480                 0x19348, 0x1934c,
1481                 0x193f8, 0x19418,
1482                 0x19420, 0x19428,
1483                 0x19430, 0x19444,
1484                 0x1944c, 0x1946c,
1485                 0x19474, 0x19474,
1486                 0x19490, 0x194cc,
1487                 0x194f0, 0x194f8,
1488                 0x19c00, 0x19c48,
1489                 0x19c50, 0x19c80,
1490                 0x19c94, 0x19c98,
1491                 0x19ca0, 0x19cbc,
1492                 0x19ce4, 0x19ce4,
1493                 0x19cf0, 0x19cf8,
1494                 0x19d00, 0x19d28,
1495                 0x19d50, 0x19d78,
1496                 0x19d94, 0x19d98,
1497                 0x19da0, 0x19dc8,
1498                 0x19df0, 0x19e10,
1499                 0x19e50, 0x19e6c,
1500                 0x19ea0, 0x19ebc,
1501                 0x19ec4, 0x19ef4,
1502                 0x19f04, 0x19f2c,
1503                 0x19f34, 0x19f34,
1504                 0x19f40, 0x19f50,
1505                 0x19f90, 0x19fac,
1506                 0x19fc4, 0x19fc8,
1507                 0x19fd0, 0x19fe4,
1508                 0x1a000, 0x1a004,
1509                 0x1a010, 0x1a06c,
1510                 0x1a0b0, 0x1a0e4,
1511                 0x1a0ec, 0x1a0f8,
1512                 0x1a100, 0x1a108,
1513                 0x1a114, 0x1a120,
1514                 0x1a128, 0x1a130,
1515                 0x1a138, 0x1a138,
1516                 0x1a190, 0x1a1c4,
1517                 0x1a1fc, 0x1a1fc,
1518                 0x1e008, 0x1e00c,
1519                 0x1e040, 0x1e044,
1520                 0x1e04c, 0x1e04c,
1521                 0x1e284, 0x1e290,
1522                 0x1e2c0, 0x1e2c0,
1523                 0x1e2e0, 0x1e2e0,
1524                 0x1e300, 0x1e384,
1525                 0x1e3c0, 0x1e3c8,
1526                 0x1e408, 0x1e40c,
1527                 0x1e440, 0x1e444,
1528                 0x1e44c, 0x1e44c,
1529                 0x1e684, 0x1e690,
1530                 0x1e6c0, 0x1e6c0,
1531                 0x1e6e0, 0x1e6e0,
1532                 0x1e700, 0x1e784,
1533                 0x1e7c0, 0x1e7c8,
1534                 0x1e808, 0x1e80c,
1535                 0x1e840, 0x1e844,
1536                 0x1e84c, 0x1e84c,
1537                 0x1ea84, 0x1ea90,
1538                 0x1eac0, 0x1eac0,
1539                 0x1eae0, 0x1eae0,
1540                 0x1eb00, 0x1eb84,
1541                 0x1ebc0, 0x1ebc8,
1542                 0x1ec08, 0x1ec0c,
1543                 0x1ec40, 0x1ec44,
1544                 0x1ec4c, 0x1ec4c,
1545                 0x1ee84, 0x1ee90,
1546                 0x1eec0, 0x1eec0,
1547                 0x1eee0, 0x1eee0,
1548                 0x1ef00, 0x1ef84,
1549                 0x1efc0, 0x1efc8,
1550                 0x1f008, 0x1f00c,
1551                 0x1f040, 0x1f044,
1552                 0x1f04c, 0x1f04c,
1553                 0x1f284, 0x1f290,
1554                 0x1f2c0, 0x1f2c0,
1555                 0x1f2e0, 0x1f2e0,
1556                 0x1f300, 0x1f384,
1557                 0x1f3c0, 0x1f3c8,
1558                 0x1f408, 0x1f40c,
1559                 0x1f440, 0x1f444,
1560                 0x1f44c, 0x1f44c,
1561                 0x1f684, 0x1f690,
1562                 0x1f6c0, 0x1f6c0,
1563                 0x1f6e0, 0x1f6e0,
1564                 0x1f700, 0x1f784,
1565                 0x1f7c0, 0x1f7c8,
1566                 0x1f808, 0x1f80c,
1567                 0x1f840, 0x1f844,
1568                 0x1f84c, 0x1f84c,
1569                 0x1fa84, 0x1fa90,
1570                 0x1fac0, 0x1fac0,
1571                 0x1fae0, 0x1fae0,
1572                 0x1fb00, 0x1fb84,
1573                 0x1fbc0, 0x1fbc8,
1574                 0x1fc08, 0x1fc0c,
1575                 0x1fc40, 0x1fc44,
1576                 0x1fc4c, 0x1fc4c,
1577                 0x1fe84, 0x1fe90,
1578                 0x1fec0, 0x1fec0,
1579                 0x1fee0, 0x1fee0,
1580                 0x1ff00, 0x1ff84,
1581                 0x1ffc0, 0x1ffc8,
1582                 0x30000, 0x30030,
1583                 0x30100, 0x30168,
1584                 0x30190, 0x301a0,
1585                 0x301a8, 0x301b8,
1586                 0x301c4, 0x301c8,
1587                 0x301d0, 0x301d0,
1588                 0x30200, 0x30320,
1589                 0x30400, 0x304b4,
1590                 0x304c0, 0x3052c,
1591                 0x30540, 0x3061c,
1592                 0x30800, 0x308a0,
1593                 0x308c0, 0x30908,
1594                 0x30910, 0x309b8,
1595                 0x30a00, 0x30a04,
1596                 0x30a0c, 0x30a14,
1597                 0x30a1c, 0x30a2c,
1598                 0x30a44, 0x30a50,
1599                 0x30a74, 0x30a74,
1600                 0x30a7c, 0x30afc,
1601                 0x30b08, 0x30c24,
1602                 0x30d00, 0x30d14,
1603                 0x30d1c, 0x30d3c,
1604                 0x30d44, 0x30d4c,
1605                 0x30d54, 0x30d74,
1606                 0x30d7c, 0x30d7c,
1607                 0x30de0, 0x30de0,
1608                 0x30e00, 0x30ed4,
1609                 0x30f00, 0x30fa4,
1610                 0x30fc0, 0x30fc4,
1611                 0x31000, 0x31004,
1612                 0x31080, 0x310fc,
1613                 0x31208, 0x31220,
1614                 0x3123c, 0x31254,
1615                 0x31300, 0x31300,
1616                 0x31308, 0x3131c,
1617                 0x31338, 0x3133c,
1618                 0x31380, 0x31380,
1619                 0x31388, 0x313a8,
1620                 0x313b4, 0x313b4,
1621                 0x31400, 0x31420,
1622                 0x31438, 0x3143c,
1623                 0x31480, 0x31480,
1624                 0x314a8, 0x314a8,
1625                 0x314b0, 0x314b4,
1626                 0x314c8, 0x314d4,
1627                 0x31a40, 0x31a4c,
1628                 0x31af0, 0x31b20,
1629                 0x31b38, 0x31b3c,
1630                 0x31b80, 0x31b80,
1631                 0x31ba8, 0x31ba8,
1632                 0x31bb0, 0x31bb4,
1633                 0x31bc8, 0x31bd4,
1634                 0x32140, 0x3218c,
1635                 0x321f0, 0x321f4,
1636                 0x32200, 0x32200,
1637                 0x32218, 0x32218,
1638                 0x32400, 0x32400,
1639                 0x32408, 0x3241c,
1640                 0x32618, 0x32620,
1641                 0x32664, 0x32664,
1642                 0x326a8, 0x326a8,
1643                 0x326ec, 0x326ec,
1644                 0x32a00, 0x32abc,
1645                 0x32b00, 0x32b38,
1646                 0x32b20, 0x32b38,
1647                 0x32b40, 0x32b58,
1648                 0x32b60, 0x32b78,
1649                 0x32c00, 0x32c00,
1650                 0x32c08, 0x32c3c,
1651                 0x33000, 0x3302c,
1652                 0x33034, 0x33050,
1653                 0x33058, 0x33058,
1654                 0x33060, 0x3308c,
1655                 0x3309c, 0x330ac,
1656                 0x330c0, 0x330c0,
1657                 0x330c8, 0x330d0,
1658                 0x330d8, 0x330e0,
1659                 0x330ec, 0x3312c,
1660                 0x33134, 0x33150,
1661                 0x33158, 0x33158,
1662                 0x33160, 0x3318c,
1663                 0x3319c, 0x331ac,
1664                 0x331c0, 0x331c0,
1665                 0x331c8, 0x331d0,
1666                 0x331d8, 0x331e0,
1667                 0x331ec, 0x33290,
1668                 0x33298, 0x332c4,
1669                 0x332e4, 0x33390,
1670                 0x33398, 0x333c4,
1671                 0x333e4, 0x3342c,
1672                 0x33434, 0x33450,
1673                 0x33458, 0x33458,
1674                 0x33460, 0x3348c,
1675                 0x3349c, 0x334ac,
1676                 0x334c0, 0x334c0,
1677                 0x334c8, 0x334d0,
1678                 0x334d8, 0x334e0,
1679                 0x334ec, 0x3352c,
1680                 0x33534, 0x33550,
1681                 0x33558, 0x33558,
1682                 0x33560, 0x3358c,
1683                 0x3359c, 0x335ac,
1684                 0x335c0, 0x335c0,
1685                 0x335c8, 0x335d0,
1686                 0x335d8, 0x335e0,
1687                 0x335ec, 0x33690,
1688                 0x33698, 0x336c4,
1689                 0x336e4, 0x33790,
1690                 0x33798, 0x337c4,
1691                 0x337e4, 0x337fc,
1692                 0x33814, 0x33814,
1693                 0x33854, 0x33868,
1694                 0x33880, 0x3388c,
1695                 0x338c0, 0x338d0,
1696                 0x338e8, 0x338ec,
1697                 0x33900, 0x3392c,
1698                 0x33934, 0x33950,
1699                 0x33958, 0x33958,
1700                 0x33960, 0x3398c,
1701                 0x3399c, 0x339ac,
1702                 0x339c0, 0x339c0,
1703                 0x339c8, 0x339d0,
1704                 0x339d8, 0x339e0,
1705                 0x339ec, 0x33a90,
1706                 0x33a98, 0x33ac4,
1707                 0x33ae4, 0x33b10,
1708                 0x33b24, 0x33b28,
1709                 0x33b38, 0x33b50,
1710                 0x33bf0, 0x33c10,
1711                 0x33c24, 0x33c28,
1712                 0x33c38, 0x33c50,
1713                 0x33cf0, 0x33cfc,
1714                 0x34000, 0x34030,
1715                 0x34100, 0x34168,
1716                 0x34190, 0x341a0,
1717                 0x341a8, 0x341b8,
1718                 0x341c4, 0x341c8,
1719                 0x341d0, 0x341d0,
1720                 0x34200, 0x34320,
1721                 0x34400, 0x344b4,
1722                 0x344c0, 0x3452c,
1723                 0x34540, 0x3461c,
1724                 0x34800, 0x348a0,
1725                 0x348c0, 0x34908,
1726                 0x34910, 0x349b8,
1727                 0x34a00, 0x34a04,
1728                 0x34a0c, 0x34a14,
1729                 0x34a1c, 0x34a2c,
1730                 0x34a44, 0x34a50,
1731                 0x34a74, 0x34a74,
1732                 0x34a7c, 0x34afc,
1733                 0x34b08, 0x34c24,
1734                 0x34d00, 0x34d14,
1735                 0x34d1c, 0x34d3c,
1736                 0x34d44, 0x34d4c,
1737                 0x34d54, 0x34d74,
1738                 0x34d7c, 0x34d7c,
1739                 0x34de0, 0x34de0,
1740                 0x34e00, 0x34ed4,
1741                 0x34f00, 0x34fa4,
1742                 0x34fc0, 0x34fc4,
1743                 0x35000, 0x35004,
1744                 0x35080, 0x350fc,
1745                 0x35208, 0x35220,
1746                 0x3523c, 0x35254,
1747                 0x35300, 0x35300,
1748                 0x35308, 0x3531c,
1749                 0x35338, 0x3533c,
1750                 0x35380, 0x35380,
1751                 0x35388, 0x353a8,
1752                 0x353b4, 0x353b4,
1753                 0x35400, 0x35420,
1754                 0x35438, 0x3543c,
1755                 0x35480, 0x35480,
1756                 0x354a8, 0x354a8,
1757                 0x354b0, 0x354b4,
1758                 0x354c8, 0x354d4,
1759                 0x35a40, 0x35a4c,
1760                 0x35af0, 0x35b20,
1761                 0x35b38, 0x35b3c,
1762                 0x35b80, 0x35b80,
1763                 0x35ba8, 0x35ba8,
1764                 0x35bb0, 0x35bb4,
1765                 0x35bc8, 0x35bd4,
1766                 0x36140, 0x3618c,
1767                 0x361f0, 0x361f4,
1768                 0x36200, 0x36200,
1769                 0x36218, 0x36218,
1770                 0x36400, 0x36400,
1771                 0x36408, 0x3641c,
1772                 0x36618, 0x36620,
1773                 0x36664, 0x36664,
1774                 0x366a8, 0x366a8,
1775                 0x366ec, 0x366ec,
1776                 0x36a00, 0x36abc,
1777                 0x36b00, 0x36b38,
1778                 0x36b20, 0x36b38,
1779                 0x36b40, 0x36b58,
1780                 0x36b60, 0x36b78,
1781                 0x36c00, 0x36c00,
1782                 0x36c08, 0x36c3c,
1783                 0x37000, 0x3702c,
1784                 0x37034, 0x37050,
1785                 0x37058, 0x37058,
1786                 0x37060, 0x3708c,
1787                 0x3709c, 0x370ac,
1788                 0x370c0, 0x370c0,
1789                 0x370c8, 0x370d0,
1790                 0x370d8, 0x370e0,
1791                 0x370ec, 0x3712c,
1792                 0x37134, 0x37150,
1793                 0x37158, 0x37158,
1794                 0x37160, 0x3718c,
1795                 0x3719c, 0x371ac,
1796                 0x371c0, 0x371c0,
1797                 0x371c8, 0x371d0,
1798                 0x371d8, 0x371e0,
1799                 0x371ec, 0x37290,
1800                 0x37298, 0x372c4,
1801                 0x372e4, 0x37390,
1802                 0x37398, 0x373c4,
1803                 0x373e4, 0x3742c,
1804                 0x37434, 0x37450,
1805                 0x37458, 0x37458,
1806                 0x37460, 0x3748c,
1807                 0x3749c, 0x374ac,
1808                 0x374c0, 0x374c0,
1809                 0x374c8, 0x374d0,
1810                 0x374d8, 0x374e0,
1811                 0x374ec, 0x3752c,
1812                 0x37534, 0x37550,
1813                 0x37558, 0x37558,
1814                 0x37560, 0x3758c,
1815                 0x3759c, 0x375ac,
1816                 0x375c0, 0x375c0,
1817                 0x375c8, 0x375d0,
1818                 0x375d8, 0x375e0,
1819                 0x375ec, 0x37690,
1820                 0x37698, 0x376c4,
1821                 0x376e4, 0x37790,
1822                 0x37798, 0x377c4,
1823                 0x377e4, 0x377fc,
1824                 0x37814, 0x37814,
1825                 0x37854, 0x37868,
1826                 0x37880, 0x3788c,
1827                 0x378c0, 0x378d0,
1828                 0x378e8, 0x378ec,
1829                 0x37900, 0x3792c,
1830                 0x37934, 0x37950,
1831                 0x37958, 0x37958,
1832                 0x37960, 0x3798c,
1833                 0x3799c, 0x379ac,
1834                 0x379c0, 0x379c0,
1835                 0x379c8, 0x379d0,
1836                 0x379d8, 0x379e0,
1837                 0x379ec, 0x37a90,
1838                 0x37a98, 0x37ac4,
1839                 0x37ae4, 0x37b10,
1840                 0x37b24, 0x37b28,
1841                 0x37b38, 0x37b50,
1842                 0x37bf0, 0x37c10,
1843                 0x37c24, 0x37c28,
1844                 0x37c38, 0x37c50,
1845                 0x37cf0, 0x37cfc,
1846                 0x40040, 0x40040,
1847                 0x40080, 0x40084,
1848                 0x40100, 0x40100,
1849                 0x40140, 0x401bc,
1850                 0x40200, 0x40214,
1851                 0x40228, 0x40228,
1852                 0x40240, 0x40258,
1853                 0x40280, 0x40280,
1854                 0x40304, 0x40304,
1855                 0x40330, 0x4033c,
1856                 0x41304, 0x413c8,
1857                 0x413d0, 0x413dc,
1858                 0x413f0, 0x413f0,
1859                 0x41400, 0x4140c,
1860                 0x41414, 0x4141c,
1861                 0x41480, 0x414d0,
1862                 0x44000, 0x4407c,
1863                 0x440c0, 0x441ac,
1864                 0x441b4, 0x4427c,
1865                 0x442c0, 0x443ac,
1866                 0x443b4, 0x4447c,
1867                 0x444c0, 0x445ac,
1868                 0x445b4, 0x4467c,
1869                 0x446c0, 0x447ac,
1870                 0x447b4, 0x4487c,
1871                 0x448c0, 0x449ac,
1872                 0x449b4, 0x44a7c,
1873                 0x44ac0, 0x44bac,
1874                 0x44bb4, 0x44c7c,
1875                 0x44cc0, 0x44dac,
1876                 0x44db4, 0x44e7c,
1877                 0x44ec0, 0x44fac,
1878                 0x44fb4, 0x4507c,
1879                 0x450c0, 0x451ac,
1880                 0x451b4, 0x451fc,
1881                 0x45800, 0x45804,
1882                 0x45810, 0x45830,
1883                 0x45840, 0x45860,
1884                 0x45868, 0x45868,
1885                 0x45880, 0x45884,
1886                 0x458a0, 0x458b0,
1887                 0x45a00, 0x45a04,
1888                 0x45a10, 0x45a30,
1889                 0x45a40, 0x45a60,
1890                 0x45a68, 0x45a68,
1891                 0x45a80, 0x45a84,
1892                 0x45aa0, 0x45ab0,
1893                 0x460c0, 0x460e4,
1894                 0x47000, 0x4703c,
1895                 0x47044, 0x4708c,
1896                 0x47200, 0x47250,
1897                 0x47400, 0x47408,
1898                 0x47414, 0x47420,
1899                 0x47600, 0x47618,
1900                 0x47800, 0x47814,
1901                 0x47820, 0x4782c,
1902                 0x50000, 0x50084,
1903                 0x50090, 0x500cc,
1904                 0x50300, 0x50384,
1905                 0x50400, 0x50400,
1906                 0x50800, 0x50884,
1907                 0x50890, 0x508cc,
1908                 0x50b00, 0x50b84,
1909                 0x50c00, 0x50c00,
1910                 0x51000, 0x51020,
1911                 0x51028, 0x510b0,
1912                 0x51300, 0x51324,
1913         };
1914
1915         u32 *buf_end = (u32 *)((char *)buf + buf_size);
1916         const unsigned int *reg_ranges;
1917         int reg_ranges_size, range;
1918         unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
1919
1920         /* Select the right set of register ranges to dump depending on the
1921          * adapter chip type.
1922          */
1923         switch (chip_version) {
1924         case CHELSIO_T5:
1925                 reg_ranges = t5_reg_ranges;
1926                 reg_ranges_size = ARRAY_SIZE(t5_reg_ranges);
1927                 break;
1928
1929         case CHELSIO_T6:
1930                 reg_ranges = t6_reg_ranges;
1931                 reg_ranges_size = ARRAY_SIZE(t6_reg_ranges);
1932                 break;
1933
1934         default:
1935                 dev_err(adap,
1936                         "Unsupported chip version %d\n", chip_version);
1937                 return;
1938         }
1939
1940         /* Clear the register buffer and insert the appropriate register
1941          * values selected by the above register ranges.
1942          */
1943         memset(buf, 0, buf_size);
1944         for (range = 0; range < reg_ranges_size; range += 2) {
1945                 unsigned int reg = reg_ranges[range];
1946                 unsigned int last_reg = reg_ranges[range + 1];
1947                 u32 *bufp = (u32 *)((char *)buf + reg);
1948
1949                 /* Iterate across the register range filling in the register
1950                  * buffer but don't write past the end of the register buffer.
1951                  */
1952                 while (reg <= last_reg && bufp < buf_end) {
1953                         *bufp++ = t4_read_reg(adap, reg);
1954                         reg += sizeof(u32);
1955                 }
1956         }
1957 }
1958
1959 /* EEPROM reads take a few tens of us while writes can take a bit over 5 ms. */
1960 #define EEPROM_DELAY            10              /* 10us per poll spin */
1961 #define EEPROM_MAX_POLL         5000            /* x 5000 == 50ms */
1962
1963 #define EEPROM_STAT_ADDR        0x7bfc
1964
1965 /**
1966  * Small utility function to wait till any outstanding VPD Access is complete.
1967  * We have a per-adapter state variable "VPD Busy" to indicate when we have a
1968  * VPD Access in flight.  This allows us to handle the problem of having a
1969  * previous VPD Access time out and prevent an attempt to inject a new VPD
1970  * Request before any in-flight VPD request has completed.
1971  */
1972 static int t4_seeprom_wait(struct adapter *adapter)
1973 {
1974         unsigned int base = adapter->params.pci.vpd_cap_addr;
1975         int max_poll;
1976
1977         /* If no VPD Access is in flight, we can just return success right
1978          * away.
1979          */
1980         if (!adapter->vpd_busy)
1981                 return 0;
1982
1983         /* Poll the VPD Capability Address/Flag register waiting for it
1984          * to indicate that the operation is complete.
1985          */
1986         max_poll = EEPROM_MAX_POLL;
1987         do {
1988                 u16 val;
1989
1990                 udelay(EEPROM_DELAY);
1991                 t4_os_pci_read_cfg2(adapter, base + PCI_VPD_ADDR, &val);
1992
1993                 /* If the operation is complete, mark the VPD as no longer
1994                  * busy and return success.
1995                  */
1996                 if ((val & PCI_VPD_ADDR_F) == adapter->vpd_flag) {
1997                         adapter->vpd_busy = 0;
1998                         return 0;
1999                 }
2000         } while (--max_poll);
2001
2002         /* Failure!  Note that we leave the VPD Busy status set in order to
2003          * avoid pushing a new VPD Access request into the VPD Capability till
2004          * the current operation eventually succeeds.  It's a bug to issue a
2005          * new request when an existing request is in flight and will result
2006          * in corrupt hardware state.
2007          */
2008         return -ETIMEDOUT;
2009 }
2010
2011 /**
2012  * t4_seeprom_read - read a serial EEPROM location
2013  * @adapter: adapter to read
2014  * @addr: EEPROM virtual address
2015  * @data: where to store the read data
2016  *
2017  * Read a 32-bit word from a location in serial EEPROM using the card's PCI
2018  * VPD capability.  Note that this function must be called with a virtual
2019  * address.
2020  */
2021 int t4_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
2022 {
2023         unsigned int base = adapter->params.pci.vpd_cap_addr;
2024         int ret;
2025
2026         /* VPD Accesses must alway be 4-byte aligned!
2027          */
2028         if (addr >= EEPROMVSIZE || (addr & 3))
2029                 return -EINVAL;
2030
2031         /* Wait for any previous operation which may still be in flight to
2032          * complete.
2033          */
2034         ret = t4_seeprom_wait(adapter);
2035         if (ret) {
2036                 dev_err(adapter, "VPD still busy from previous operation\n");
2037                 return ret;
2038         }
2039
2040         /* Issue our new VPD Read request, mark the VPD as being busy and wait
2041          * for our request to complete.  If it doesn't complete, note the
2042          * error and return it to our caller.  Note that we do not reset the
2043          * VPD Busy status!
2044          */
2045         t4_os_pci_write_cfg2(adapter, base + PCI_VPD_ADDR, (u16)addr);
2046         adapter->vpd_busy = 1;
2047         adapter->vpd_flag = PCI_VPD_ADDR_F;
2048         ret = t4_seeprom_wait(adapter);
2049         if (ret) {
2050                 dev_err(adapter, "VPD read of address %#x failed\n", addr);
2051                 return ret;
2052         }
2053
2054         /* Grab the returned data, swizzle it into our endianness and
2055          * return success.
2056          */
2057         t4_os_pci_read_cfg4(adapter, base + PCI_VPD_DATA, data);
2058         *data = le32_to_cpu(*data);
2059         return 0;
2060 }
2061
2062 /**
2063  * t4_seeprom_write - write a serial EEPROM location
2064  * @adapter: adapter to write
2065  * @addr: virtual EEPROM address
2066  * @data: value to write
2067  *
2068  * Write a 32-bit word to a location in serial EEPROM using the card's PCI
2069  * VPD capability.  Note that this function must be called with a virtual
2070  * address.
2071  */
2072 int t4_seeprom_write(struct adapter *adapter, u32 addr, u32 data)
2073 {
2074         unsigned int base = adapter->params.pci.vpd_cap_addr;
2075         int ret;
2076         u32 stats_reg = 0;
2077         int max_poll;
2078
2079         /* VPD Accesses must alway be 4-byte aligned!
2080          */
2081         if (addr >= EEPROMVSIZE || (addr & 3))
2082                 return -EINVAL;
2083
2084         /* Wait for any previous operation which may still be in flight to
2085          * complete.
2086          */
2087         ret = t4_seeprom_wait(adapter);
2088         if (ret) {
2089                 dev_err(adapter, "VPD still busy from previous operation\n");
2090                 return ret;
2091         }
2092
2093         /* Issue our new VPD Read request, mark the VPD as being busy and wait
2094          * for our request to complete.  If it doesn't complete, note the
2095          * error and return it to our caller.  Note that we do not reset the
2096          * VPD Busy status!
2097          */
2098         t4_os_pci_write_cfg4(adapter, base + PCI_VPD_DATA,
2099                              cpu_to_le32(data));
2100         t4_os_pci_write_cfg2(adapter, base + PCI_VPD_ADDR,
2101                              (u16)addr | PCI_VPD_ADDR_F);
2102         adapter->vpd_busy = 1;
2103         adapter->vpd_flag = 0;
2104         ret = t4_seeprom_wait(adapter);
2105         if (ret) {
2106                 dev_err(adapter, "VPD write of address %#x failed\n", addr);
2107                 return ret;
2108         }
2109
2110         /* Reset PCI_VPD_DATA register after a transaction and wait for our
2111          * request to complete. If it doesn't complete, return error.
2112          */
2113         t4_os_pci_write_cfg4(adapter, base + PCI_VPD_DATA, 0);
2114         max_poll = EEPROM_MAX_POLL;
2115         do {
2116                 udelay(EEPROM_DELAY);
2117                 t4_seeprom_read(adapter, EEPROM_STAT_ADDR, &stats_reg);
2118         } while ((stats_reg & 0x1) && --max_poll);
2119         if (!max_poll)
2120                 return -ETIMEDOUT;
2121
2122         /* Return success! */
2123         return 0;
2124 }
2125
2126 /**
2127  * t4_seeprom_wp - enable/disable EEPROM write protection
2128  * @adapter: the adapter
2129  * @enable: whether to enable or disable write protection
2130  *
2131  * Enables or disables write protection on the serial EEPROM.
2132  */
2133 int t4_seeprom_wp(struct adapter *adapter, int enable)
2134 {
2135         return t4_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0);
2136 }
2137
2138 /**
2139  * t4_fw_tp_pio_rw - Access TP PIO through LDST
2140  * @adap: the adapter
2141  * @vals: where the indirect register values are stored/written
2142  * @nregs: how many indirect registers to read/write
2143  * @start_idx: index of first indirect register to read/write
2144  * @rw: Read (1) or Write (0)
2145  *
2146  * Access TP PIO registers through LDST
2147  */
2148 void t4_fw_tp_pio_rw(struct adapter *adap, u32 *vals, unsigned int nregs,
2149                      unsigned int start_index, unsigned int rw)
2150 {
2151         int cmd = FW_LDST_ADDRSPC_TP_PIO;
2152         struct fw_ldst_cmd c;
2153         unsigned int i;
2154         int ret;
2155
2156         for (i = 0 ; i < nregs; i++) {
2157                 memset(&c, 0, sizeof(c));
2158                 c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) |
2159                                                 F_FW_CMD_REQUEST |
2160                                                 (rw ? F_FW_CMD_READ :
2161                                                       F_FW_CMD_WRITE) |
2162                                                 V_FW_LDST_CMD_ADDRSPACE(cmd));
2163                 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
2164
2165                 c.u.addrval.addr = cpu_to_be32(start_index + i);
2166                 c.u.addrval.val  = rw ? 0 : cpu_to_be32(vals[i]);
2167                 ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
2168                 if (ret == 0) {
2169                         if (rw)
2170                                 vals[i] = be32_to_cpu(c.u.addrval.val);
2171                 }
2172         }
2173 }
2174
2175 /**
2176  * t4_read_rss_key - read the global RSS key
2177  * @adap: the adapter
2178  * @key: 10-entry array holding the 320-bit RSS key
2179  *
2180  * Reads the global 320-bit RSS key.
2181  */
2182 void t4_read_rss_key(struct adapter *adap, u32 *key)
2183 {
2184         t4_fw_tp_pio_rw(adap, key, 10, A_TP_RSS_SECRET_KEY0, 1);
2185 }
2186
2187 /**
2188  * t4_write_rss_key - program one of the RSS keys
2189  * @adap: the adapter
2190  * @key: 10-entry array holding the 320-bit RSS key
2191  * @idx: which RSS key to write
2192  *
2193  * Writes one of the RSS keys with the given 320-bit value.  If @idx is
2194  * 0..15 the corresponding entry in the RSS key table is written,
2195  * otherwise the global RSS key is written.
2196  */
2197 void t4_write_rss_key(struct adapter *adap, u32 *key, int idx)
2198 {
2199         u32 vrt = t4_read_reg(adap, A_TP_RSS_CONFIG_VRT);
2200         u8 rss_key_addr_cnt = 16;
2201
2202         /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble),
2203          * allows access to key addresses 16-63 by using KeyWrAddrX
2204          * as index[5:4](upper 2) into key table
2205          */
2206         if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) &&
2207             (vrt & F_KEYEXTEND) && (G_KEYMODE(vrt) == 3))
2208                 rss_key_addr_cnt = 32;
2209
2210         t4_fw_tp_pio_rw(adap, key, 10, A_TP_RSS_SECRET_KEY0, 0);
2211
2212         if (idx >= 0 && idx < rss_key_addr_cnt) {
2213                 if (rss_key_addr_cnt > 16)
2214                         t4_write_reg(adap, A_TP_RSS_CONFIG_VRT,
2215                                      V_KEYWRADDRX(idx >> 4) |
2216                                      V_T6_VFWRADDR(idx) | F_KEYWREN);
2217                 else
2218                         t4_write_reg(adap, A_TP_RSS_CONFIG_VRT,
2219                                      V_KEYWRADDR(idx) | F_KEYWREN);
2220         }
2221 }
2222
2223 /**
2224  * t4_config_rss_range - configure a portion of the RSS mapping table
2225  * @adapter: the adapter
2226  * @mbox: mbox to use for the FW command
2227  * @viid: virtual interface whose RSS subtable is to be written
2228  * @start: start entry in the table to write
2229  * @n: how many table entries to write
2230  * @rspq: values for the "response queue" (Ingress Queue) lookup table
2231  * @nrspq: number of values in @rspq
2232  *
2233  * Programs the selected part of the VI's RSS mapping table with the
2234  * provided values.  If @nrspq < @n the supplied values are used repeatedly
2235  * until the full table range is populated.
2236  *
2237  * The caller must ensure the values in @rspq are in the range allowed for
2238  * @viid.
2239  */
2240 int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
2241                         int start, int n, const u16 *rspq, unsigned int nrspq)
2242 {
2243         int ret;
2244         const u16 *rsp = rspq;
2245         const u16 *rsp_end = rspq + nrspq;
2246         struct fw_rss_ind_tbl_cmd cmd;
2247
2248         memset(&cmd, 0, sizeof(cmd));
2249         cmd.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
2250                                      F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
2251                                      V_FW_RSS_IND_TBL_CMD_VIID(viid));
2252         cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
2253
2254         /*
2255          * Each firmware RSS command can accommodate up to 32 RSS Ingress
2256          * Queue Identifiers.  These Ingress Queue IDs are packed three to
2257          * a 32-bit word as 10-bit values with the upper remaining 2 bits
2258          * reserved.
2259          */
2260         while (n > 0) {
2261                 int nq = min(n, 32);
2262                 int nq_packed = 0;
2263                 __be32 *qp = &cmd.iq0_to_iq2;
2264
2265                 /*
2266                  * Set up the firmware RSS command header to send the next
2267                  * "nq" Ingress Queue IDs to the firmware.
2268                  */
2269                 cmd.niqid = cpu_to_be16(nq);
2270                 cmd.startidx = cpu_to_be16(start);
2271
2272                 /*
2273                  * "nq" more done for the start of the next loop.
2274                  */
2275                 start += nq;
2276                 n -= nq;
2277
2278                 /*
2279                  * While there are still Ingress Queue IDs to stuff into the
2280                  * current firmware RSS command, retrieve them from the
2281                  * Ingress Queue ID array and insert them into the command.
2282                  */
2283                 while (nq > 0) {
2284                         /*
2285                          * Grab up to the next 3 Ingress Queue IDs (wrapping
2286                          * around the Ingress Queue ID array if necessary) and
2287                          * insert them into the firmware RSS command at the
2288                          * current 3-tuple position within the commad.
2289                          */
2290                         u16 qbuf[3];
2291                         u16 *qbp = qbuf;
2292                         int nqbuf = min(3, nq);
2293
2294                         nq -= nqbuf;
2295                         qbuf[0] = 0;
2296                         qbuf[1] = 0;
2297                         qbuf[2] = 0;
2298                         while (nqbuf && nq_packed < 32) {
2299                                 nqbuf--;
2300                                 nq_packed++;
2301                                 *qbp++ = *rsp++;
2302                                 if (rsp >= rsp_end)
2303                                         rsp = rspq;
2304                         }
2305                         *qp++ = cpu_to_be32(V_FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) |
2306                                             V_FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) |
2307                                             V_FW_RSS_IND_TBL_CMD_IQ2(qbuf[2]));
2308                 }
2309
2310                 /*
2311                  * Send this portion of the RRS table update to the firmware;
2312                  * bail out on any errors.
2313                  */
2314                 if (is_pf4(adapter))
2315                         ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd),
2316                                          NULL);
2317                 else
2318                         ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
2319                 if (ret)
2320                         return ret;
2321         }
2322
2323         return 0;
2324 }
2325
2326 /**
2327  * t4_config_vi_rss - configure per VI RSS settings
2328  * @adapter: the adapter
2329  * @mbox: mbox to use for the FW command
2330  * @viid: the VI id
2331  * @flags: RSS flags
2332  * @defq: id of the default RSS queue for the VI.
2333  *
2334  * Configures VI-specific RSS properties.
2335  */
2336 int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
2337                      unsigned int flags, unsigned int defq)
2338 {
2339         struct fw_rss_vi_config_cmd c;
2340
2341         memset(&c, 0, sizeof(c));
2342         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
2343                                    F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
2344                                    V_FW_RSS_VI_CONFIG_CMD_VIID(viid));
2345         c.retval_len16 = cpu_to_be32(FW_LEN16(c));
2346         c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags |
2347                         V_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(defq));
2348         if (is_pf4(adapter))
2349                 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
2350         else
2351                 return t4vf_wr_mbox(adapter, &c, sizeof(c), NULL);
2352 }
2353
2354 /**
2355  * t4_read_config_vi_rss - read the configured per VI RSS settings
2356  * @adapter: the adapter
2357  * @mbox: mbox to use for the FW command
2358  * @viid: the VI id
2359  * @flags: where to place the configured flags
2360  * @defq: where to place the id of the default RSS queue for the VI.
2361  *
2362  * Read configured VI-specific RSS properties.
2363  */
2364 int t4_read_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
2365                           u64 *flags, unsigned int *defq)
2366 {
2367         struct fw_rss_vi_config_cmd c;
2368         unsigned int result;
2369         int ret;
2370
2371         memset(&c, 0, sizeof(c));
2372         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
2373                                    F_FW_CMD_REQUEST | F_FW_CMD_READ |
2374                                    V_FW_RSS_VI_CONFIG_CMD_VIID(viid));
2375         c.retval_len16 = cpu_to_be32(FW_LEN16(c));
2376         ret = t4_wr_mbox(adapter, mbox, &c, sizeof(c), &c);
2377         if (!ret) {
2378                 result = be32_to_cpu(c.u.basicvirtual.defaultq_to_udpen);
2379                 if (defq)
2380                         *defq = G_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(result);
2381                 if (flags)
2382                         *flags = result & M_FW_RSS_VI_CONFIG_CMD_DEFAULTQ;
2383         }
2384
2385         return ret;
2386 }
2387
2388 /**
2389  * init_cong_ctrl - initialize congestion control parameters
2390  * @a: the alpha values for congestion control
2391  * @b: the beta values for congestion control
2392  *
2393  * Initialize the congestion control parameters.
2394  */
2395 static void init_cong_ctrl(unsigned short *a, unsigned short *b)
2396 {
2397         int i;
2398
2399         for (i = 0; i < 9; i++) {
2400                 a[i] = 1;
2401                 b[i] = 0;
2402         }
2403
2404         a[9] = 2;
2405         a[10] = 3;
2406         a[11] = 4;
2407         a[12] = 5;
2408         a[13] = 6;
2409         a[14] = 7;
2410         a[15] = 8;
2411         a[16] = 9;
2412         a[17] = 10;
2413         a[18] = 14;
2414         a[19] = 17;
2415         a[20] = 21;
2416         a[21] = 25;
2417         a[22] = 30;
2418         a[23] = 35;
2419         a[24] = 45;
2420         a[25] = 60;
2421         a[26] = 80;
2422         a[27] = 100;
2423         a[28] = 200;
2424         a[29] = 300;
2425         a[30] = 400;
2426         a[31] = 500;
2427
2428         b[9] = 1;
2429         b[10] = 1;
2430         b[11] = 2;
2431         b[12] = 2;
2432         b[13] = 3;
2433         b[14] = 3;
2434         b[15] = 3;
2435         b[16] = 3;
2436         b[17] = 4;
2437         b[18] = 4;
2438         b[19] = 4;
2439         b[20] = 4;
2440         b[21] = 4;
2441         b[22] = 5;
2442         b[23] = 5;
2443         b[24] = 5;
2444         b[25] = 5;
2445         b[26] = 5;
2446         b[27] = 5;
2447         b[28] = 6;
2448         b[29] = 6;
2449         b[30] = 7;
2450         b[31] = 7;
2451 }
2452
2453 #define INIT_CMD(var, cmd, rd_wr) do { \
2454         (var).op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_##cmd##_CMD) | \
2455                         F_FW_CMD_REQUEST | F_FW_CMD_##rd_wr); \
2456         (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \
2457 } while (0)
2458
2459 int t4_get_core_clock(struct adapter *adapter, struct vpd_params *p)
2460 {
2461         u32 cclk_param, cclk_val;
2462         int ret;
2463
2464         /*
2465          * Ask firmware for the Core Clock since it knows how to translate the
2466          * Reference Clock ('V2') VPD field into a Core Clock value ...
2467          */
2468         cclk_param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
2469                       V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK));
2470         ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
2471                               1, &cclk_param, &cclk_val);
2472         if (ret) {
2473                 dev_err(adapter, "%s: error in fetching from coreclock - %d\n",
2474                         __func__, ret);
2475                 return ret;
2476         }
2477
2478         p->cclk = cclk_val;
2479         dev_debug(adapter, "%s: p->cclk = %u\n", __func__, p->cclk);
2480         return 0;
2481 }
2482
2483 /**
2484  * t4_get_pfres - retrieve VF resource limits
2485  * @adapter: the adapter
2486  *
2487  * Retrieves configured resource limits and capabilities for a physical
2488  * function.  The results are stored in @adapter->pfres.
2489  */
2490 int t4_get_pfres(struct adapter *adapter)
2491 {
2492         struct pf_resources *pfres = &adapter->params.pfres;
2493         struct fw_pfvf_cmd cmd, rpl;
2494         u32 word;
2495         int v;
2496
2497         /*
2498          * Execute PFVF Read command to get VF resource limits; bail out early
2499          * with error on command failure.
2500          */
2501         memset(&cmd, 0, sizeof(cmd));
2502         cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) |
2503                                     F_FW_CMD_REQUEST |
2504                                     F_FW_CMD_READ |
2505                                     V_FW_PFVF_CMD_PFN(adapter->pf) |
2506                                     V_FW_PFVF_CMD_VFN(0));
2507         cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
2508         v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
2509         if (v != FW_SUCCESS)
2510                 return v;
2511
2512         /*
2513          * Extract PF resource limits and return success.
2514          */
2515         word = be32_to_cpu(rpl.niqflint_niq);
2516         pfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word);
2517
2518         word = be32_to_cpu(rpl.type_to_neq);
2519         pfres->neq = G_FW_PFVF_CMD_NEQ(word);
2520
2521         word = be32_to_cpu(rpl.r_caps_to_nethctrl);
2522         pfres->nethctrl = G_FW_PFVF_CMD_NETHCTRL(word);
2523
2524         return 0;
2525 }
2526
2527 /* serial flash and firmware constants and flash config file constants */
2528 enum {
2529         SF_ATTEMPTS = 10,             /* max retries for SF operations */
2530
2531         /* flash command opcodes */
2532         SF_PROG_PAGE    = 2,          /* program page */
2533         SF_WR_DISABLE   = 4,          /* disable writes */
2534         SF_RD_STATUS    = 5,          /* read status register */
2535         SF_WR_ENABLE    = 6,          /* enable writes */
2536         SF_RD_DATA_FAST = 0xb,        /* read flash */
2537         SF_RD_ID        = 0x9f,       /* read ID */
2538         SF_ERASE_SECTOR = 0xd8,       /* erase sector */
2539 };
2540
2541 /**
2542  * sf1_read - read data from the serial flash
2543  * @adapter: the adapter
2544  * @byte_cnt: number of bytes to read
2545  * @cont: whether another operation will be chained
2546  * @lock: whether to lock SF for PL access only
2547  * @valp: where to store the read data
2548  *
2549  * Reads up to 4 bytes of data from the serial flash.  The location of
2550  * the read needs to be specified prior to calling this by issuing the
2551  * appropriate commands to the serial flash.
2552  */
2553 static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
2554                     int lock, u32 *valp)
2555 {
2556         int ret;
2557
2558         if (!byte_cnt || byte_cnt > 4)
2559                 return -EINVAL;
2560         if (t4_read_reg(adapter, A_SF_OP) & F_BUSY)
2561                 return -EBUSY;
2562         t4_write_reg(adapter, A_SF_OP,
2563                      V_SF_LOCK(lock) | V_CONT(cont) | V_BYTECNT(byte_cnt - 1));
2564         ret = t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5);
2565         if (!ret)
2566                 *valp = t4_read_reg(adapter, A_SF_DATA);
2567         return ret;
2568 }
2569
2570 /**
2571  * sf1_write - write data to the serial flash
2572  * @adapter: the adapter
2573  * @byte_cnt: number of bytes to write
2574  * @cont: whether another operation will be chained
2575  * @lock: whether to lock SF for PL access only
2576  * @val: value to write
2577  *
2578  * Writes up to 4 bytes of data to the serial flash.  The location of
2579  * the write needs to be specified prior to calling this by issuing the
2580  * appropriate commands to the serial flash.
2581  */
2582 static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
2583                      int lock, u32 val)
2584 {
2585         if (!byte_cnt || byte_cnt > 4)
2586                 return -EINVAL;
2587         if (t4_read_reg(adapter, A_SF_OP) & F_BUSY)
2588                 return -EBUSY;
2589         t4_write_reg(adapter, A_SF_DATA, val);
2590         t4_write_reg(adapter, A_SF_OP, V_SF_LOCK(lock) |
2591                      V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1));
2592         return t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5);
2593 }
2594
2595 /**
2596  * t4_read_flash - read words from serial flash
2597  * @adapter: the adapter
2598  * @addr: the start address for the read
2599  * @nwords: how many 32-bit words to read
2600  * @data: where to store the read data
2601  * @byte_oriented: whether to store data as bytes or as words
2602  *
2603  * Read the specified number of 32-bit words from the serial flash.
2604  * If @byte_oriented is set the read data is stored as a byte array
2605  * (i.e., big-endian), otherwise as 32-bit words in the platform's
2606  * natural endianness.
2607  */
2608 int t4_read_flash(struct adapter *adapter, unsigned int addr,
2609                   unsigned int nwords, u32 *data, int byte_oriented)
2610 {
2611         int ret;
2612
2613         if (((addr + nwords * sizeof(u32)) > adapter->params.sf_size) ||
2614             (addr & 3))
2615                 return -EINVAL;
2616
2617         addr = rte_constant_bswap32(addr) | SF_RD_DATA_FAST;
2618
2619         ret = sf1_write(adapter, 4, 1, 0, addr);
2620         if (ret != 0)
2621                 return ret;
2622
2623         ret = sf1_read(adapter, 1, 1, 0, data);
2624         if (ret != 0)
2625                 return ret;
2626
2627         for ( ; nwords; nwords--, data++) {
2628                 ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
2629                 if (nwords == 1)
2630                         t4_write_reg(adapter, A_SF_OP, 0);    /* unlock SF */
2631                 if (ret)
2632                         return ret;
2633                 if (byte_oriented)
2634                         *data = cpu_to_be32(*data);
2635         }
2636         return 0;
2637 }
2638
2639 /**
2640  * t4_get_exprom_version - return the Expansion ROM version (if any)
2641  * @adapter: the adapter
2642  * @vers: where to place the version
2643  *
2644  * Reads the Expansion ROM header from FLASH and returns the version
2645  * number (if present) through the @vers return value pointer.  We return
2646  * this in the Firmware Version Format since it's convenient.  Return
2647  * 0 on success, -ENOENT if no Expansion ROM is present.
2648  */
2649 static int t4_get_exprom_version(struct adapter *adapter, u32 *vers)
2650 {
2651         struct exprom_header {
2652                 unsigned char hdr_arr[16];      /* must start with 0x55aa */
2653                 unsigned char hdr_ver[4];       /* Expansion ROM version */
2654         } *hdr;
2655         u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header),
2656                                            sizeof(u32))];
2657         int ret;
2658
2659         ret = t4_read_flash(adapter, FLASH_EXP_ROM_START,
2660                             ARRAY_SIZE(exprom_header_buf),
2661                             exprom_header_buf, 0);
2662         if (ret)
2663                 return ret;
2664
2665         hdr = (struct exprom_header *)exprom_header_buf;
2666         if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa)
2667                 return -ENOENT;
2668
2669         *vers = (V_FW_HDR_FW_VER_MAJOR(hdr->hdr_ver[0]) |
2670                  V_FW_HDR_FW_VER_MINOR(hdr->hdr_ver[1]) |
2671                  V_FW_HDR_FW_VER_MICRO(hdr->hdr_ver[2]) |
2672                  V_FW_HDR_FW_VER_BUILD(hdr->hdr_ver[3]));
2673         return 0;
2674 }
2675
2676 /**
2677  * t4_get_fw_version - read the firmware version
2678  * @adapter: the adapter
2679  * @vers: where to place the version
2680  *
2681  * Reads the FW version from flash.
2682  */
2683 static int t4_get_fw_version(struct adapter *adapter, u32 *vers)
2684 {
2685         return t4_read_flash(adapter, FLASH_FW_START +
2686                              offsetof(struct fw_hdr, fw_ver), 1, vers, 0);
2687 }
2688
2689 /**
2690  *     t4_get_bs_version - read the firmware bootstrap version
2691  *     @adapter: the adapter
2692  *     @vers: where to place the version
2693  *
2694  *     Reads the FW Bootstrap version from flash.
2695  */
2696 static int t4_get_bs_version(struct adapter *adapter, u32 *vers)
2697 {
2698         return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START +
2699                              offsetof(struct fw_hdr, fw_ver), 1,
2700                              vers, 0);
2701 }
2702
2703 /**
2704  * t4_get_tp_version - read the TP microcode version
2705  * @adapter: the adapter
2706  * @vers: where to place the version
2707  *
2708  * Reads the TP microcode version from flash.
2709  */
2710 static int t4_get_tp_version(struct adapter *adapter, u32 *vers)
2711 {
2712         return t4_read_flash(adapter, FLASH_FW_START +
2713                              offsetof(struct fw_hdr, tp_microcode_ver),
2714                              1, vers, 0);
2715 }
2716
2717 /**
2718  * t4_get_version_info - extract various chip/firmware version information
2719  * @adapter: the adapter
2720  *
2721  * Reads various chip/firmware version numbers and stores them into the
2722  * adapter Adapter Parameters structure.  If any of the efforts fails
2723  * the first failure will be returned, but all of the version numbers
2724  * will be read.
2725  */
2726 int t4_get_version_info(struct adapter *adapter)
2727 {
2728         int ret = 0;
2729
2730 #define FIRST_RET(__getvinfo) \
2731         do { \
2732                 int __ret = __getvinfo; \
2733                 if (__ret && !ret) \
2734                         ret = __ret; \
2735         } while (0)
2736
2737         FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
2738         FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
2739         FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
2740         FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
2741
2742 #undef FIRST_RET
2743
2744         return ret;
2745 }
2746
2747 /**
2748  * t4_dump_version_info - dump all of the adapter configuration IDs
2749  * @adapter: the adapter
2750  *
2751  * Dumps all of the various bits of adapter configuration version/revision
2752  * IDs information.  This is typically called at some point after
2753  * t4_get_version_info() has been called.
2754  */
2755 void t4_dump_version_info(struct adapter *adapter)
2756 {
2757         /**
2758          * Device information.
2759          */
2760         dev_info(adapter, "Chelsio rev %d\n",
2761                  CHELSIO_CHIP_RELEASE(adapter->params.chip));
2762
2763         /**
2764          * Firmware Version.
2765          */
2766         if (!adapter->params.fw_vers)
2767                 dev_warn(adapter, "No firmware loaded\n");
2768         else
2769                 dev_info(adapter, "Firmware version: %u.%u.%u.%u\n",
2770                          G_FW_HDR_FW_VER_MAJOR(adapter->params.fw_vers),
2771                          G_FW_HDR_FW_VER_MINOR(adapter->params.fw_vers),
2772                          G_FW_HDR_FW_VER_MICRO(adapter->params.fw_vers),
2773                          G_FW_HDR_FW_VER_BUILD(adapter->params.fw_vers));
2774
2775         /**
2776          * Bootstrap Firmware Version.
2777          */
2778         if (!adapter->params.bs_vers)
2779                 dev_warn(adapter, "No bootstrap loaded\n");
2780         else
2781                 dev_info(adapter, "Bootstrap version: %u.%u.%u.%u\n",
2782                          G_FW_HDR_FW_VER_MAJOR(adapter->params.bs_vers),
2783                          G_FW_HDR_FW_VER_MINOR(adapter->params.bs_vers),
2784                          G_FW_HDR_FW_VER_MICRO(adapter->params.bs_vers),
2785                          G_FW_HDR_FW_VER_BUILD(adapter->params.bs_vers));
2786
2787         /**
2788          * TP Microcode Version.
2789          */
2790         if (!adapter->params.tp_vers)
2791                 dev_warn(adapter, "No TP Microcode loaded\n");
2792         else
2793                 dev_info(adapter, "TP Microcode version: %u.%u.%u.%u\n",
2794                          G_FW_HDR_FW_VER_MAJOR(adapter->params.tp_vers),
2795                          G_FW_HDR_FW_VER_MINOR(adapter->params.tp_vers),
2796                          G_FW_HDR_FW_VER_MICRO(adapter->params.tp_vers),
2797                          G_FW_HDR_FW_VER_BUILD(adapter->params.tp_vers));
2798
2799         /**
2800          * Expansion ROM version.
2801          */
2802         if (!adapter->params.er_vers)
2803                 dev_info(adapter, "No Expansion ROM loaded\n");
2804         else
2805                 dev_info(adapter, "Expansion ROM version: %u.%u.%u.%u\n",
2806                          G_FW_HDR_FW_VER_MAJOR(adapter->params.er_vers),
2807                          G_FW_HDR_FW_VER_MINOR(adapter->params.er_vers),
2808                          G_FW_HDR_FW_VER_MICRO(adapter->params.er_vers),
2809                          G_FW_HDR_FW_VER_BUILD(adapter->params.er_vers));
2810 }
2811
2812 #define ADVERT_MASK (V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED) | \
2813                      FW_PORT_CAP32_ANEG)
2814 /**
2815  *     fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
2816  *     @caps16: a 16-bit Port Capabilities value
2817  *
2818  *     Returns the equivalent 32-bit Port Capabilities value.
2819  */
2820 fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
2821 {
2822         fw_port_cap32_t caps32 = 0;
2823
2824 #define CAP16_TO_CAP32(__cap) \
2825         do { \
2826                 if (caps16 & FW_PORT_CAP_##__cap) \
2827                         caps32 |= FW_PORT_CAP32_##__cap; \
2828         } while (0)
2829
2830         CAP16_TO_CAP32(SPEED_100M);
2831         CAP16_TO_CAP32(SPEED_1G);
2832         CAP16_TO_CAP32(SPEED_25G);
2833         CAP16_TO_CAP32(SPEED_10G);
2834         CAP16_TO_CAP32(SPEED_40G);
2835         CAP16_TO_CAP32(SPEED_100G);
2836         CAP16_TO_CAP32(FC_RX);
2837         CAP16_TO_CAP32(FC_TX);
2838         CAP16_TO_CAP32(ANEG);
2839         CAP16_TO_CAP32(MDIX);
2840         CAP16_TO_CAP32(MDIAUTO);
2841         CAP16_TO_CAP32(FEC_RS);
2842         CAP16_TO_CAP32(FEC_BASER_RS);
2843         CAP16_TO_CAP32(802_3_PAUSE);
2844         CAP16_TO_CAP32(802_3_ASM_DIR);
2845
2846 #undef CAP16_TO_CAP32
2847
2848         return caps32;
2849 }
2850
2851 /**
2852  *     fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
2853  *     @caps32: a 32-bit Port Capabilities value
2854  *
2855  *     Returns the equivalent 16-bit Port Capabilities value.  Note that
2856  *     not all 32-bit Port Capabilities can be represented in the 16-bit
2857  *     Port Capabilities and some fields/values may not make it.
2858  */
2859 static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32)
2860 {
2861         fw_port_cap16_t caps16 = 0;
2862
2863 #define CAP32_TO_CAP16(__cap) \
2864         do { \
2865                 if (caps32 & FW_PORT_CAP32_##__cap) \
2866                         caps16 |= FW_PORT_CAP_##__cap; \
2867         } while (0)
2868
2869         CAP32_TO_CAP16(SPEED_100M);
2870         CAP32_TO_CAP16(SPEED_1G);
2871         CAP32_TO_CAP16(SPEED_10G);
2872         CAP32_TO_CAP16(SPEED_25G);
2873         CAP32_TO_CAP16(SPEED_40G);
2874         CAP32_TO_CAP16(SPEED_100G);
2875         CAP32_TO_CAP16(FC_RX);
2876         CAP32_TO_CAP16(FC_TX);
2877         CAP32_TO_CAP16(802_3_PAUSE);
2878         CAP32_TO_CAP16(802_3_ASM_DIR);
2879         CAP32_TO_CAP16(ANEG);
2880         CAP32_TO_CAP16(MDIX);
2881         CAP32_TO_CAP16(MDIAUTO);
2882         CAP32_TO_CAP16(FEC_RS);
2883         CAP32_TO_CAP16(FEC_BASER_RS);
2884
2885 #undef CAP32_TO_CAP16
2886
2887         return caps16;
2888 }
2889
2890 /* Translate Firmware Pause specification to Common Code */
2891 static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
2892 {
2893         enum cc_pause cc_pause = 0;
2894
2895         if (fw_pause & FW_PORT_CAP32_FC_RX)
2896                 cc_pause |= PAUSE_RX;
2897         if (fw_pause & FW_PORT_CAP32_FC_TX)
2898                 cc_pause |= PAUSE_TX;
2899
2900         return cc_pause;
2901 }
2902
2903 /* Translate Common Code Pause Frame specification into Firmware */
2904 static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
2905 {
2906         fw_port_cap32_t fw_pause = 0;
2907
2908         if (cc_pause & PAUSE_RX)
2909                 fw_pause |= FW_PORT_CAP32_FC_RX;
2910         if (cc_pause & PAUSE_TX)
2911                 fw_pause |= FW_PORT_CAP32_FC_TX;
2912
2913         return fw_pause;
2914 }
2915
2916 /* Translate Firmware Forward Error Correction specification to Common Code */
2917 static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
2918 {
2919         enum cc_fec cc_fec = 0;
2920
2921         if (fw_fec & FW_PORT_CAP32_FEC_RS)
2922                 cc_fec |= FEC_RS;
2923         if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
2924                 cc_fec |= FEC_BASER_RS;
2925
2926         return cc_fec;
2927 }
2928
2929 /* Translate Common Code Forward Error Correction specification to Firmware */
2930 static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
2931 {
2932         fw_port_cap32_t fw_fec = 0;
2933
2934         if (cc_fec & FEC_RS)
2935                 fw_fec |= FW_PORT_CAP32_FEC_RS;
2936         if (cc_fec & FEC_BASER_RS)
2937                 fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;
2938
2939         return fw_fec;
2940 }
2941
2942 /**
2943  * t4_link_l1cfg - apply link configuration to MAC/PHY
2944  * @adapter: the adapter
2945  * @mbox: the Firmware Mailbox to use
2946  * @port: the Port ID
2947  * @lc: the Port's Link Configuration
2948  *
2949  * Set up a port's MAC and PHY according to a desired link configuration.
2950  * - If the PHY can auto-negotiate first decide what to advertise, then
2951  *   enable/disable auto-negotiation as desired, and reset.
2952  * - If the PHY does not auto-negotiate just reset it.
2953  * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
2954  *   otherwise do it later based on the outcome of auto-negotiation.
2955  */
2956 int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
2957                   struct link_config *lc)
2958 {
2959         unsigned int fw_mdi = V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
2960         unsigned int fw_caps = adap->params.fw_caps_support;
2961         fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap;
2962         struct fw_port_cmd cmd;
2963
2964         lc->link_ok = 0;
2965
2966         fw_fc = cc_to_fwcap_pause(lc->requested_fc);
2967
2968         /* Convert Common Code Forward Error Control settings into the
2969          * Firmware's API.  If the current Requested FEC has "Automatic"
2970          * (IEEE 802.3) specified, then we use whatever the Firmware
2971          * sent us as part of it's IEEE 802.3-based interpratation of
2972          * the Transceiver Module EPROM FEC parameters.  Otherwise we
2973          * use whatever is in the current Requested FEC settings.
2974          */
2975         if (lc->requested_fec & FEC_AUTO)
2976                 cc_fec = lc->auto_fec;
2977         else
2978                 cc_fec = lc->requested_fec;
2979         fw_fec = cc_to_fwcap_fec(cc_fec);
2980
2981         /* Figure out what our Requested Port Capabilities are going to be.
2982          */
2983         if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
2984                 rcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec;
2985                 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
2986                 lc->fec = cc_fec;
2987         } else if (lc->autoneg == AUTONEG_DISABLE) {
2988                 rcap = lc->requested_speed | fw_fc | fw_fec | fw_mdi;
2989                 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
2990                 lc->fec = cc_fec;
2991         } else {
2992                 rcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
2993         }
2994
2995         /* And send that on to the Firmware ...
2996          */
2997         memset(&cmd, 0, sizeof(cmd));
2998         cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
2999                                        F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
3000                                        V_FW_PORT_CMD_PORTID(port));
3001         cmd.action_to_len16 =
3002                 cpu_to_be32(V_FW_PORT_CMD_ACTION(fw_caps == FW_CAPS16 ?
3003                                                  FW_PORT_ACTION_L1_CFG :
3004                                                  FW_PORT_ACTION_L1_CFG32) |
3005                             FW_LEN16(cmd));
3006
3007         if (fw_caps == FW_CAPS16)
3008                 cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
3009         else
3010                 cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);
3011
3012         return t4_wr_mbox(adap, mbox, &cmd, sizeof(cmd), NULL);
3013 }
3014
3015 /**
3016  * t4_flash_cfg_addr - return the address of the flash configuration file
3017  * @adapter: the adapter
3018  *
3019  * Return the address within the flash where the Firmware Configuration
3020  * File is stored, or an error if the device FLASH is too small to contain
3021  * a Firmware Configuration File.
3022  */
3023 int t4_flash_cfg_addr(struct adapter *adapter)
3024 {
3025         /*
3026          * If the device FLASH isn't large enough to hold a Firmware
3027          * Configuration File, return an error.
3028          */
3029         if (adapter->params.sf_size < FLASH_CFG_START + FLASH_CFG_MAX_SIZE)
3030                 return -ENOSPC;
3031
3032         return FLASH_CFG_START;
3033 }
3034
3035 #define PF_INTR_MASK (F_PFSW | F_PFCIM)
3036
3037 /**
3038  * t4_intr_enable - enable interrupts
3039  * @adapter: the adapter whose interrupts should be enabled
3040  *
3041  * Enable PF-specific interrupts for the calling function and the top-level
3042  * interrupt concentrator for global interrupts.  Interrupts are already
3043  * enabled at each module, here we just enable the roots of the interrupt
3044  * hierarchies.
3045  *
3046  * Note: this function should be called only when the driver manages
3047  * non PF-specific interrupts from the various HW modules.  Only one PCI
3048  * function at a time should be doing this.
3049  */
3050 void t4_intr_enable(struct adapter *adapter)
3051 {
3052         u32 val = 0;
3053         u32 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
3054         u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
3055                  G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
3056
3057         if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
3058                 val = F_ERR_DROPPED_DB | F_ERR_EGR_CTXT_PRIO | F_DBFIFO_HP_INT;
3059         t4_write_reg(adapter, A_SGE_INT_ENABLE3, F_ERR_CPL_EXCEED_IQE_SIZE |
3060                      F_ERR_INVALID_CIDX_INC | F_ERR_CPL_OPCODE_0 |
3061                      F_ERR_DATA_CPL_ON_HIGH_QID1 | F_INGRESS_SIZE_ERR |
3062                      F_ERR_DATA_CPL_ON_HIGH_QID0 | F_ERR_BAD_DB_PIDX3 |
3063                      F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 |
3064                      F_ERR_BAD_DB_PIDX0 | F_ERR_ING_CTXT_PRIO |
3065                      F_DBFIFO_LP_INT | F_EGRESS_SIZE_ERR | val);
3066         t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), PF_INTR_MASK);
3067         t4_set_reg_field(adapter, A_PL_INT_MAP0, 0, 1 << pf);
3068 }
3069
3070 /**
3071  * t4_intr_disable - disable interrupts
3072  * @adapter: the adapter whose interrupts should be disabled
3073  *
3074  * Disable interrupts.  We only disable the top-level interrupt
3075  * concentrators.  The caller must be a PCI function managing global
3076  * interrupts.
3077  */
3078 void t4_intr_disable(struct adapter *adapter)
3079 {
3080         u32 whoami = t4_read_reg(adapter, A_PL_WHOAMI);
3081         u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
3082                  G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);
3083
3084         t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), 0);
3085         t4_set_reg_field(adapter, A_PL_INT_MAP0, 1 << pf, 0);
3086 }
3087
3088 /**
3089  * t4_get_port_type_description - return Port Type string description
3090  * @port_type: firmware Port Type enumeration
3091  */
3092 const char *t4_get_port_type_description(enum fw_port_type port_type)
3093 {
3094         static const char * const port_type_description[] = {
3095                 "Fiber_XFI",
3096                 "Fiber_XAUI",
3097                 "BT_SGMII",
3098                 "BT_XFI",
3099                 "BT_XAUI",
3100                 "KX4",
3101                 "CX4",
3102                 "KX",
3103                 "KR",
3104                 "SFP",
3105                 "BP_AP",
3106                 "BP4_AP",
3107                 "QSFP_10G",
3108                 "QSA",
3109                 "QSFP",
3110                 "BP40_BA",
3111                 "KR4_100G",
3112                 "CR4_QSFP",
3113                 "CR_QSFP",
3114                 "CR2_QSFP",
3115                 "SFP28",
3116                 "KR_SFP28",
3117         };
3118
3119         if (port_type < ARRAY_SIZE(port_type_description))
3120                 return port_type_description[port_type];
3121         return "UNKNOWN";
3122 }
3123
3124 /**
3125  * t4_get_mps_bg_map - return the buffer groups associated with a port
3126  * @adap: the adapter
3127  * @pidx: the port index
3128  *
3129  * Returns a bitmap indicating which MPS buffer groups are associated
3130  * with the given port.  Bit i is set if buffer group i is used by the
3131  * port.
3132  */
3133 unsigned int t4_get_mps_bg_map(struct adapter *adap, unsigned int pidx)
3134 {
3135         unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
3136         unsigned int nports = 1 << G_NUMPORTS(t4_read_reg(adap,
3137                                                           A_MPS_CMN_CTL));
3138
3139         if (pidx >= nports) {
3140                 dev_warn(adap, "MPS Port Index %d >= Nports %d\n",
3141                          pidx, nports);
3142                 return 0;
3143         }
3144
3145         switch (chip_version) {
3146         case CHELSIO_T4:
3147         case CHELSIO_T5:
3148                 switch (nports) {
3149                 case 1: return 0xf;
3150                 case 2: return 3 << (2 * pidx);
3151                 case 4: return 1 << pidx;
3152                 }
3153                 break;
3154
3155         case CHELSIO_T6:
3156                 switch (nports) {
3157                 case 2: return 1 << (2 * pidx);
3158                 }
3159                 break;
3160         }
3161
3162         dev_err(adap, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
3163                 chip_version, nports);
3164         return 0;
3165 }
3166
3167 /**
3168  * t4_get_tp_ch_map - return TP ingress channels associated with a port
3169  * @adapter: the adapter
3170  * @pidx: the port index
3171  *
3172  * Returns a bitmap indicating which TP Ingress Channels are associated with
3173  * a given Port.  Bit i is set if TP Ingress Channel i is used by the Port.
3174  */
3175 unsigned int t4_get_tp_ch_map(struct adapter *adapter, unsigned int pidx)
3176 {
3177         unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
3178         unsigned int nports = 1 << G_NUMPORTS(t4_read_reg(adapter,
3179                                                           A_MPS_CMN_CTL));
3180
3181         if (pidx >= nports) {
3182                 dev_warn(adap, "TP Port Index %d >= Nports %d\n",
3183                          pidx, nports);
3184                 return 0;
3185         }
3186
3187         switch (chip_version) {
3188         case CHELSIO_T4:
3189         case CHELSIO_T5:
3190                 /* Note that this happens to be the same values as the MPS
3191                  * Buffer Group Map for these Chips.  But we replicate the code
3192                  * here because they're really separate concepts.
3193                  */
3194                 switch (nports) {
3195                 case 1: return 0xf;
3196                 case 2: return 3 << (2 * pidx);
3197                 case 4: return 1 << pidx;
3198                 }
3199                 break;
3200
3201         case CHELSIO_T6:
3202                 switch (nports) {
3203                 case 2: return 1 << pidx;
3204                 }
3205                 break;
3206         }
3207
3208         dev_err(adapter, "Need TP Channel Map for Chip %0x, Nports %d\n",
3209                 chip_version, nports);
3210         return 0;
3211 }
3212
3213 /**
3214  * t4_get_port_stats - collect port statistics
3215  * @adap: the adapter
3216  * @idx: the port index
3217  * @p: the stats structure to fill
3218  *
3219  * Collect statistics related to the given port from HW.
3220  */
3221 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
3222 {
3223         u32 bgmap = t4_get_mps_bg_map(adap, idx);
3224         u32 stat_ctl = t4_read_reg(adap, A_MPS_STAT_CTL);
3225
3226 #define GET_STAT(name) \
3227         t4_read_reg64(adap, \
3228                       (is_t4(adap->params.chip) ? \
3229                        PORT_REG(idx, A_MPS_PORT_STAT_##name##_L) :\
3230                        T5_PORT_REG(idx, A_MPS_PORT_STAT_##name##_L)))
3231 #define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L)
3232
3233         p->tx_octets           = GET_STAT(TX_PORT_BYTES);
3234         p->tx_frames           = GET_STAT(TX_PORT_FRAMES);
3235         p->tx_bcast_frames     = GET_STAT(TX_PORT_BCAST);
3236         p->tx_mcast_frames     = GET_STAT(TX_PORT_MCAST);
3237         p->tx_ucast_frames     = GET_STAT(TX_PORT_UCAST);
3238         p->tx_error_frames     = GET_STAT(TX_PORT_ERROR);
3239         p->tx_frames_64        = GET_STAT(TX_PORT_64B);
3240         p->tx_frames_65_127    = GET_STAT(TX_PORT_65B_127B);
3241         p->tx_frames_128_255   = GET_STAT(TX_PORT_128B_255B);
3242         p->tx_frames_256_511   = GET_STAT(TX_PORT_256B_511B);
3243         p->tx_frames_512_1023  = GET_STAT(TX_PORT_512B_1023B);
3244         p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
3245         p->tx_frames_1519_max  = GET_STAT(TX_PORT_1519B_MAX);
3246         p->tx_drop             = GET_STAT(TX_PORT_DROP);
3247         p->tx_pause            = GET_STAT(TX_PORT_PAUSE);
3248         p->tx_ppp0             = GET_STAT(TX_PORT_PPP0);
3249         p->tx_ppp1             = GET_STAT(TX_PORT_PPP1);
3250         p->tx_ppp2             = GET_STAT(TX_PORT_PPP2);
3251         p->tx_ppp3             = GET_STAT(TX_PORT_PPP3);
3252         p->tx_ppp4             = GET_STAT(TX_PORT_PPP4);
3253         p->tx_ppp5             = GET_STAT(TX_PORT_PPP5);
3254         p->tx_ppp6             = GET_STAT(TX_PORT_PPP6);
3255         p->tx_ppp7             = GET_STAT(TX_PORT_PPP7);
3256
3257         if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
3258                 if (stat_ctl & F_COUNTPAUSESTATTX) {
3259                         p->tx_frames -= p->tx_pause;
3260                         p->tx_octets -= p->tx_pause * 64;
3261                 }
3262                 if (stat_ctl & F_COUNTPAUSEMCTX)
3263                         p->tx_mcast_frames -= p->tx_pause;
3264         }
3265
3266         p->rx_octets           = GET_STAT(RX_PORT_BYTES);
3267         p->rx_frames           = GET_STAT(RX_PORT_FRAMES);
3268         p->rx_bcast_frames     = GET_STAT(RX_PORT_BCAST);
3269         p->rx_mcast_frames     = GET_STAT(RX_PORT_MCAST);
3270         p->rx_ucast_frames     = GET_STAT(RX_PORT_UCAST);
3271         p->rx_too_long         = GET_STAT(RX_PORT_MTU_ERROR);
3272         p->rx_jabber           = GET_STAT(RX_PORT_MTU_CRC_ERROR);
3273         p->rx_fcs_err          = GET_STAT(RX_PORT_CRC_ERROR);
3274         p->rx_len_err          = GET_STAT(RX_PORT_LEN_ERROR);
3275         p->rx_symbol_err       = GET_STAT(RX_PORT_SYM_ERROR);
3276         p->rx_runt             = GET_STAT(RX_PORT_LESS_64B);
3277         p->rx_frames_64        = GET_STAT(RX_PORT_64B);
3278         p->rx_frames_65_127    = GET_STAT(RX_PORT_65B_127B);
3279         p->rx_frames_128_255   = GET_STAT(RX_PORT_128B_255B);
3280         p->rx_frames_256_511   = GET_STAT(RX_PORT_256B_511B);
3281         p->rx_frames_512_1023  = GET_STAT(RX_PORT_512B_1023B);
3282         p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
3283         p->rx_frames_1519_max  = GET_STAT(RX_PORT_1519B_MAX);
3284         p->rx_pause            = GET_STAT(RX_PORT_PAUSE);
3285         p->rx_ppp0             = GET_STAT(RX_PORT_PPP0);
3286         p->rx_ppp1             = GET_STAT(RX_PORT_PPP1);
3287         p->rx_ppp2             = GET_STAT(RX_PORT_PPP2);
3288         p->rx_ppp3             = GET_STAT(RX_PORT_PPP3);
3289         p->rx_ppp4             = GET_STAT(RX_PORT_PPP4);
3290         p->rx_ppp5             = GET_STAT(RX_PORT_PPP5);
3291         p->rx_ppp6             = GET_STAT(RX_PORT_PPP6);
3292         p->rx_ppp7             = GET_STAT(RX_PORT_PPP7);
3293
3294         if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
3295                 if (stat_ctl & F_COUNTPAUSESTATRX) {
3296                         p->rx_frames -= p->rx_pause;
3297                         p->rx_octets -= p->rx_pause * 64;
3298                 }
3299                 if (stat_ctl & F_COUNTPAUSEMCRX)
3300                         p->rx_mcast_frames -= p->rx_pause;
3301         }
3302
3303         p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
3304         p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
3305         p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
3306         p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
3307         p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
3308         p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
3309         p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
3310         p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
3311
3312 #undef GET_STAT
3313 #undef GET_STAT_COM
3314 }
3315
3316 /**
3317  * t4_get_port_stats_offset - collect port stats relative to a previous snapshot
3318  * @adap: The adapter
3319  * @idx: The port
3320  * @stats: Current stats to fill
3321  * @offset: Previous stats snapshot
3322  */
3323 void t4_get_port_stats_offset(struct adapter *adap, int idx,
3324                               struct port_stats *stats,
3325                               struct port_stats *offset)
3326 {
3327         u64 *s, *o;
3328         unsigned int i;
3329
3330         t4_get_port_stats(adap, idx, stats);
3331         for (i = 0, s = (u64 *)stats, o = (u64 *)offset;
3332              i < (sizeof(struct port_stats) / sizeof(u64));
3333              i++, s++, o++)
3334                 *s -= *o;
3335 }
3336
3337 /**
3338  * t4_clr_port_stats - clear port statistics
3339  * @adap: the adapter
3340  * @idx: the port index
3341  *
3342  * Clear HW statistics for the given port.
3343  */
3344 void t4_clr_port_stats(struct adapter *adap, int idx)
3345 {
3346         unsigned int i;
3347         u32 bgmap = t4_get_mps_bg_map(adap, idx);
3348         u32 port_base_addr;
3349
3350         if (is_t4(adap->params.chip))
3351                 port_base_addr = PORT_BASE(idx);
3352         else
3353                 port_base_addr = T5_PORT_BASE(idx);
3354
3355         for (i = A_MPS_PORT_STAT_TX_PORT_BYTES_L;
3356              i <= A_MPS_PORT_STAT_TX_PORT_PPP7_H; i += 8)
3357                 t4_write_reg(adap, port_base_addr + i, 0);
3358         for (i = A_MPS_PORT_STAT_RX_PORT_BYTES_L;
3359              i <= A_MPS_PORT_STAT_RX_PORT_LESS_64B_H; i += 8)
3360                 t4_write_reg(adap, port_base_addr + i, 0);
3361         for (i = 0; i < 4; i++)
3362                 if (bgmap & (1 << i)) {
3363                         t4_write_reg(adap,
3364                                      A_MPS_STAT_RX_BG_0_MAC_DROP_FRAME_L +
3365                                      i * 8, 0);
3366                         t4_write_reg(adap,
3367                                      A_MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_L +
3368                                      i * 8, 0);
3369                 }
3370 }
3371
3372 /**
3373  * t4_fw_hello - establish communication with FW
3374  * @adap: the adapter
3375  * @mbox: mailbox to use for the FW command
3376  * @evt_mbox: mailbox to receive async FW events
3377  * @master: specifies the caller's willingness to be the device master
3378  * @state: returns the current device state (if non-NULL)
3379  *
3380  * Issues a command to establish communication with FW.  Returns either
3381  * an error (negative integer) or the mailbox of the Master PF.
3382  */
3383 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
3384                 enum dev_master master, enum dev_state *state)
3385 {
3386         int ret;
3387         struct fw_hello_cmd c;
3388         u32 v;
3389         unsigned int master_mbox;
3390         int retries = FW_CMD_HELLO_RETRIES;
3391
3392 retry:
3393         memset(&c, 0, sizeof(c));
3394         INIT_CMD(c, HELLO, WRITE);
3395         c.err_to_clearinit = cpu_to_be32(
3396                         V_FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) |
3397                         V_FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) |
3398                         V_FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox :
3399                                                 M_FW_HELLO_CMD_MBMASTER) |
3400                         V_FW_HELLO_CMD_MBASYNCNOT(evt_mbox) |
3401                         V_FW_HELLO_CMD_STAGE(FW_HELLO_CMD_STAGE_OS) |
3402                         F_FW_HELLO_CMD_CLEARINIT);
3403
3404         /*
3405          * Issue the HELLO command to the firmware.  If it's not successful
3406          * but indicates that we got a "busy" or "timeout" condition, retry
3407          * the HELLO until we exhaust our retry limit.  If we do exceed our
3408          * retry limit, check to see if the firmware left us any error
3409          * information and report that if so ...
3410          */
3411         ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
3412         if (ret != FW_SUCCESS) {
3413                 if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
3414                         goto retry;
3415                 if (t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_ERR)
3416                         t4_report_fw_error(adap);
3417                 return ret;
3418         }
3419
3420         v = be32_to_cpu(c.err_to_clearinit);
3421         master_mbox = G_FW_HELLO_CMD_MBMASTER(v);
3422         if (state) {
3423                 if (v & F_FW_HELLO_CMD_ERR)
3424                         *state = DEV_STATE_ERR;
3425                 else if (v & F_FW_HELLO_CMD_INIT)
3426                         *state = DEV_STATE_INIT;
3427                 else
3428                         *state = DEV_STATE_UNINIT;
3429         }
3430
3431         /*
3432          * If we're not the Master PF then we need to wait around for the
3433          * Master PF Driver to finish setting up the adapter.
3434          *
3435          * Note that we also do this wait if we're a non-Master-capable PF and
3436          * there is no current Master PF; a Master PF may show up momentarily
3437          * and we wouldn't want to fail pointlessly.  (This can happen when an
3438          * OS loads lots of different drivers rapidly at the same time).  In
3439          * this case, the Master PF returned by the firmware will be
3440          * M_PCIE_FW_MASTER so the test below will work ...
3441          */
3442         if ((v & (F_FW_HELLO_CMD_ERR | F_FW_HELLO_CMD_INIT)) == 0 &&
3443             master_mbox != mbox) {
3444                 int waiting = FW_CMD_HELLO_TIMEOUT;
3445
3446                 /*
3447                  * Wait for the firmware to either indicate an error or
3448                  * initialized state.  If we see either of these we bail out
3449                  * and report the issue to the caller.  If we exhaust the
3450                  * "hello timeout" and we haven't exhausted our retries, try
3451                  * again.  Otherwise bail with a timeout error.
3452                  */
3453                 for (;;) {
3454                         u32 pcie_fw;
3455
3456                         msleep(50);
3457                         waiting -= 50;
3458
3459                         /*
3460                          * If neither Error nor Initialialized are indicated
3461                          * by the firmware keep waiting till we exaust our
3462                          * timeout ... and then retry if we haven't exhausted
3463                          * our retries ...
3464                          */
3465                         pcie_fw = t4_read_reg(adap, A_PCIE_FW);
3466                         if (!(pcie_fw & (F_PCIE_FW_ERR | F_PCIE_FW_INIT))) {
3467                                 if (waiting <= 0) {
3468                                         if (retries-- > 0)
3469                                                 goto retry;
3470
3471                                         return -ETIMEDOUT;
3472                                 }
3473                                 continue;
3474                         }
3475
3476                         /*
3477                          * We either have an Error or Initialized condition
3478                          * report errors preferentially.
3479                          */
3480                         if (state) {
3481                                 if (pcie_fw & F_PCIE_FW_ERR)
3482                                         *state = DEV_STATE_ERR;
3483                                 else if (pcie_fw & F_PCIE_FW_INIT)
3484                                         *state = DEV_STATE_INIT;
3485                         }
3486
3487                         /*
3488                          * If we arrived before a Master PF was selected and
3489                          * there's not a valid Master PF, grab its identity
3490                          * for our caller.
3491                          */
3492                         if (master_mbox == M_PCIE_FW_MASTER &&
3493                             (pcie_fw & F_PCIE_FW_MASTER_VLD))
3494                                 master_mbox = G_PCIE_FW_MASTER(pcie_fw);
3495                         break;
3496                 }
3497         }
3498
3499         return master_mbox;
3500 }
3501
3502 /**
3503  * t4_fw_bye - end communication with FW
3504  * @adap: the adapter
3505  * @mbox: mailbox to use for the FW command
3506  *
3507  * Issues a command to terminate communication with FW.
3508  */
3509 int t4_fw_bye(struct adapter *adap, unsigned int mbox)
3510 {
3511         struct fw_bye_cmd c;
3512
3513         memset(&c, 0, sizeof(c));
3514         INIT_CMD(c, BYE, WRITE);
3515         return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3516 }
3517
3518 /**
3519  * t4_fw_reset - issue a reset to FW
3520  * @adap: the adapter
3521  * @mbox: mailbox to use for the FW command
3522  * @reset: specifies the type of reset to perform
3523  *
3524  * Issues a reset command of the specified type to FW.
3525  */
3526 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
3527 {
3528         struct fw_reset_cmd c;
3529
3530         memset(&c, 0, sizeof(c));
3531         INIT_CMD(c, RESET, WRITE);
3532         c.val = cpu_to_be32(reset);
3533         return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3534 }
3535
3536 /**
3537  * t4_fw_halt - issue a reset/halt to FW and put uP into RESET
3538  * @adap: the adapter
3539  * @mbox: mailbox to use for the FW RESET command (if desired)
3540  * @force: force uP into RESET even if FW RESET command fails
3541  *
3542  * Issues a RESET command to firmware (if desired) with a HALT indication
3543  * and then puts the microprocessor into RESET state.  The RESET command
3544  * will only be issued if a legitimate mailbox is provided (mbox <=
3545  * M_PCIE_FW_MASTER).
3546  *
3547  * This is generally used in order for the host to safely manipulate the
3548  * adapter without fear of conflicting with whatever the firmware might
3549  * be doing.  The only way out of this state is to RESTART the firmware
3550  * ...
3551  */
3552 int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
3553 {
3554         int ret = 0;
3555
3556         /*
3557          * If a legitimate mailbox is provided, issue a RESET command
3558          * with a HALT indication.
3559          */
3560         if (mbox <= M_PCIE_FW_MASTER) {
3561                 struct fw_reset_cmd c;
3562
3563                 memset(&c, 0, sizeof(c));
3564                 INIT_CMD(c, RESET, WRITE);
3565                 c.val = cpu_to_be32(F_PIORST | F_PIORSTMODE);
3566                 c.halt_pkd = cpu_to_be32(F_FW_RESET_CMD_HALT);
3567                 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3568         }
3569
3570         /*
3571          * Normally we won't complete the operation if the firmware RESET
3572          * command fails but if our caller insists we'll go ahead and put the
3573          * uP into RESET.  This can be useful if the firmware is hung or even
3574          * missing ...  We'll have to take the risk of putting the uP into
3575          * RESET without the cooperation of firmware in that case.
3576          *
3577          * We also force the firmware's HALT flag to be on in case we bypassed
3578          * the firmware RESET command above or we're dealing with old firmware
3579          * which doesn't have the HALT capability.  This will serve as a flag
3580          * for the incoming firmware to know that it's coming out of a HALT
3581          * rather than a RESET ... if it's new enough to understand that ...
3582          */
3583         if (ret == 0 || force) {
3584                 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, F_UPCRST);
3585                 t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT,
3586                                  F_PCIE_FW_HALT);
3587         }
3588
3589         /*
3590          * And we always return the result of the firmware RESET command
3591          * even when we force the uP into RESET ...
3592          */
3593         return ret;
3594 }
3595
3596 /**
3597  * t4_fw_restart - restart the firmware by taking the uP out of RESET
3598  * @adap: the adapter
3599  * @mbox: mailbox to use for the FW RESET command (if desired)
3600  * @reset: if we want to do a RESET to restart things
3601  *
3602  * Restart firmware previously halted by t4_fw_halt().  On successful
3603  * return the previous PF Master remains as the new PF Master and there
3604  * is no need to issue a new HELLO command, etc.
3605  *
3606  * We do this in two ways:
3607  *
3608  * 1. If we're dealing with newer firmware we'll simply want to take
3609  *    the chip's microprocessor out of RESET.  This will cause the
3610  *    firmware to start up from its start vector.  And then we'll loop
3611  *    until the firmware indicates it's started again (PCIE_FW.HALT
3612  *    reset to 0) or we timeout.
3613  *
3614  * 2. If we're dealing with older firmware then we'll need to RESET
3615  *    the chip since older firmware won't recognize the PCIE_FW.HALT
3616  *    flag and automatically RESET itself on startup.
3617  */
3618 int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
3619 {
3620         if (reset) {
3621                 /*
3622                  * Since we're directing the RESET instead of the firmware
3623                  * doing it automatically, we need to clear the PCIE_FW.HALT
3624                  * bit.
3625                  */
3626                 t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT, 0);
3627
3628                 /*
3629                  * If we've been given a valid mailbox, first try to get the
3630                  * firmware to do the RESET.  If that works, great and we can
3631                  * return success.  Otherwise, if we haven't been given a
3632                  * valid mailbox or the RESET command failed, fall back to
3633                  * hitting the chip with a hammer.
3634                  */
3635                 if (mbox <= M_PCIE_FW_MASTER) {
3636                         t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0);
3637                         msleep(100);
3638                         if (t4_fw_reset(adap, mbox,
3639                                         F_PIORST | F_PIORSTMODE) == 0)
3640                                 return 0;
3641                 }
3642
3643                 t4_write_reg(adap, A_PL_RST, F_PIORST | F_PIORSTMODE);
3644                 msleep(2000);
3645         } else {
3646                 int ms;
3647
3648                 t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0);
3649                 for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
3650                         if (!(t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_HALT))
3651                                 return FW_SUCCESS;
3652                         msleep(100);
3653                         ms += 100;
3654                 }
3655                 return -ETIMEDOUT;
3656         }
3657         return 0;
3658 }
3659
3660 /**
3661  * t4_fl_pkt_align - return the fl packet alignment
3662  * @adap: the adapter
3663  *
3664  * T4 has a single field to specify the packing and padding boundary.
3665  * T5 onwards has separate fields for this and hence the alignment for
3666  * next packet offset is maximum of these two.
3667  */
3668 int t4_fl_pkt_align(struct adapter *adap)
3669 {
3670         u32 sge_control, sge_control2;
3671         unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
3672
3673         sge_control = t4_read_reg(adap, A_SGE_CONTROL);
3674
3675         /* T4 uses a single control field to specify both the PCIe Padding and
3676          * Packing Boundary.  T5 introduced the ability to specify these
3677          * separately.  The actual Ingress Packet Data alignment boundary
3678          * within Packed Buffer Mode is the maximum of these two
3679          * specifications.
3680          */
3681         if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
3682                 ingpad_shift = X_INGPADBOUNDARY_SHIFT;
3683         else
3684                 ingpad_shift = X_T6_INGPADBOUNDARY_SHIFT;
3685
3686         ingpadboundary = 1 << (G_INGPADBOUNDARY(sge_control) + ingpad_shift);
3687
3688         fl_align = ingpadboundary;
3689         if (!is_t4(adap->params.chip)) {
3690                 sge_control2 = t4_read_reg(adap, A_SGE_CONTROL2);
3691                 ingpackboundary = G_INGPACKBOUNDARY(sge_control2);
3692                 if (ingpackboundary == X_INGPACKBOUNDARY_16B)
3693                         ingpackboundary = 16;
3694                 else
3695                         ingpackboundary = 1 << (ingpackboundary +
3696                                         X_INGPACKBOUNDARY_SHIFT);
3697
3698                 fl_align = max(ingpadboundary, ingpackboundary);
3699         }
3700         return fl_align;
3701 }
3702
3703 /**
3704  * t4_fixup_host_params_compat - fix up host-dependent parameters
3705  * @adap: the adapter
3706  * @page_size: the host's Base Page Size
3707  * @cache_line_size: the host's Cache Line Size
3708  * @chip_compat: maintain compatibility with designated chip
3709  *
3710  * Various registers in the chip contain values which are dependent on the
3711  * host's Base Page and Cache Line Sizes.  This function will fix all of
3712  * those registers with the appropriate values as passed in ...
3713  *
3714  * @chip_compat is used to limit the set of changes that are made
3715  * to be compatible with the indicated chip release.  This is used by
3716  * drivers to maintain compatibility with chip register settings when
3717  * the drivers haven't [yet] been updated with new chip support.
3718  */
3719 int t4_fixup_host_params_compat(struct adapter *adap,
3720                                 unsigned int page_size,
3721                                 unsigned int cache_line_size,
3722                                 enum chip_type chip_compat)
3723 {
3724         unsigned int page_shift = cxgbe_fls(page_size) - 1;
3725         unsigned int sge_hps = page_shift - 10;
3726         unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
3727         unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
3728         unsigned int fl_align_log = cxgbe_fls(fl_align) - 1;
3729
3730         t4_write_reg(adap, A_SGE_HOST_PAGE_SIZE,
3731                      V_HOSTPAGESIZEPF0(sge_hps) |
3732                      V_HOSTPAGESIZEPF1(sge_hps) |
3733                      V_HOSTPAGESIZEPF2(sge_hps) |
3734                      V_HOSTPAGESIZEPF3(sge_hps) |
3735                      V_HOSTPAGESIZEPF4(sge_hps) |
3736                      V_HOSTPAGESIZEPF5(sge_hps) |
3737                      V_HOSTPAGESIZEPF6(sge_hps) |
3738                      V_HOSTPAGESIZEPF7(sge_hps));
3739
3740         if (is_t4(adap->params.chip) || is_t4(chip_compat))
3741                 t4_set_reg_field(adap, A_SGE_CONTROL,
3742                                  V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
3743                                  F_EGRSTATUSPAGESIZE,
3744                                  V_INGPADBOUNDARY(fl_align_log -
3745                                                   X_INGPADBOUNDARY_SHIFT) |
3746                                 V_EGRSTATUSPAGESIZE(stat_len != 64));
3747         else {
3748                 unsigned int pack_align;
3749                 unsigned int ingpad, ingpack;
3750                 unsigned int pcie_cap;
3751
3752                 /*
3753                  * T5 introduced the separation of the Free List Padding and
3754                  * Packing Boundaries.  Thus, we can select a smaller Padding
3755                  * Boundary to avoid uselessly chewing up PCIe Link and Memory
3756                  * Bandwidth, and use a Packing Boundary which is large enough
3757                  * to avoid false sharing between CPUs, etc.
3758                  *
3759                  * For the PCI Link, the smaller the Padding Boundary the
3760                  * better.  For the Memory Controller, a smaller Padding
3761                  * Boundary is better until we cross under the Memory Line
3762                  * Size (the minimum unit of transfer to/from Memory).  If we
3763                  * have a Padding Boundary which is smaller than the Memory
3764                  * Line Size, that'll involve a Read-Modify-Write cycle on the
3765                  * Memory Controller which is never good.
3766                  */
3767
3768                 /* We want the Packing Boundary to be based on the Cache Line
3769                  * Size in order to help avoid False Sharing performance
3770                  * issues between CPUs, etc.  We also want the Packing
3771                  * Boundary to incorporate the PCI-E Maximum Payload Size.  We
3772                  * get best performance when the Packing Boundary is a
3773                  * multiple of the Maximum Payload Size.
3774                  */
3775                 pack_align = fl_align;
3776                 pcie_cap = t4_os_find_pci_capability(adap, PCI_CAP_ID_EXP);
3777                 if (pcie_cap) {
3778                         unsigned int mps, mps_log;
3779                         u16 devctl;
3780
3781                         /* The PCIe Device Control Maximum Payload Size field
3782                          * [bits 7:5] encodes sizes as powers of 2 starting at
3783                          * 128 bytes.
3784                          */
3785                         t4_os_pci_read_cfg2(adap, pcie_cap + PCI_EXP_DEVCTL,
3786                                             &devctl);
3787                         mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
3788                         mps = 1 << mps_log;
3789                         if (mps > pack_align)
3790                                 pack_align = mps;
3791                 }
3792
3793                 /*
3794                  * N.B. T5 has a different interpretation of the "0" value for
3795                  * the Packing Boundary.  This corresponds to 16 bytes instead
3796                  * of the expected 32 bytes.  We never have a Packing Boundary
3797                  * less than 32 bytes so we can't use that special value but
3798                  * on the other hand, if we wanted 32 bytes, the best we can
3799                  * really do is 64 bytes ...
3800                  */
3801                 if (pack_align <= 16) {
3802                         ingpack = X_INGPACKBOUNDARY_16B;
3803                         fl_align = 16;
3804                 } else if (pack_align == 32) {
3805                         ingpack = X_INGPACKBOUNDARY_64B;
3806                         fl_align = 64;
3807                 } else {
3808                         unsigned int pack_align_log = cxgbe_fls(pack_align) - 1;
3809
3810                         ingpack = pack_align_log - X_INGPACKBOUNDARY_SHIFT;
3811                         fl_align = pack_align;
3812                 }
3813
3814                 /* Use the smallest Ingress Padding which isn't smaller than
3815                  * the Memory Controller Read/Write Size.  We'll take that as
3816                  * being 8 bytes since we don't know of any system with a
3817                  * wider Memory Controller Bus Width.
3818                  */
3819                 if (is_t5(adap->params.chip))
3820                         ingpad = X_INGPADBOUNDARY_32B;
3821                 else
3822                         ingpad = X_T6_INGPADBOUNDARY_8B;
3823                 t4_set_reg_field(adap, A_SGE_CONTROL,
3824                                  V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
3825                                  F_EGRSTATUSPAGESIZE,
3826                                  V_INGPADBOUNDARY(ingpad) |
3827                                  V_EGRSTATUSPAGESIZE(stat_len != 64));
3828                 t4_set_reg_field(adap, A_SGE_CONTROL2,
3829                                  V_INGPACKBOUNDARY(M_INGPACKBOUNDARY),
3830                                  V_INGPACKBOUNDARY(ingpack));
3831         }
3832
3833         /*
3834          * Adjust various SGE Free List Host Buffer Sizes.
3835          *
3836          * The first four entries are:
3837          *
3838          *   0: Host Page Size
3839          *   1: 64KB
3840          *   2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
3841          *   3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
3842          *
3843          * For the single-MTU buffers in unpacked mode we need to include
3844          * space for the SGE Control Packet Shift, 14 byte Ethernet header,
3845          * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
3846          * Padding boundary.  All of these are accommodated in the Factory
3847          * Default Firmware Configuration File but we need to adjust it for
3848          * this host's cache line size.
3849          */
3850         t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE0, page_size);
3851         t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE2,
3852                      (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE2) + fl_align - 1)
3853                      & ~(fl_align - 1));
3854         t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE3,
3855                      (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE3) + fl_align - 1)
3856                      & ~(fl_align - 1));
3857
3858         t4_write_reg(adap, A_ULP_RX_TDDP_PSZ, V_HPZ0(page_shift - 12));
3859
3860         return 0;
3861 }
3862
3863 /**
3864  * t4_fixup_host_params - fix up host-dependent parameters (T4 compatible)
3865  * @adap: the adapter
3866  * @page_size: the host's Base Page Size
3867  * @cache_line_size: the host's Cache Line Size
3868  *
3869  * Various registers in T4 contain values which are dependent on the
3870  * host's Base Page and Cache Line Sizes.  This function will fix all of
3871  * those registers with the appropriate values as passed in ...
3872  *
3873  * This routine makes changes which are compatible with T4 chips.
3874  */
3875 int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
3876                          unsigned int cache_line_size)
3877 {
3878         return t4_fixup_host_params_compat(adap, page_size, cache_line_size,
3879                                            T4_LAST_REV);
3880 }
3881
3882 /**
3883  * t4_fw_initialize - ask FW to initialize the device
3884  * @adap: the adapter
3885  * @mbox: mailbox to use for the FW command
3886  *
3887  * Issues a command to FW to partially initialize the device.  This
3888  * performs initialization that generally doesn't depend on user input.
3889  */
3890 int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
3891 {
3892         struct fw_initialize_cmd c;
3893
3894         memset(&c, 0, sizeof(c));
3895         INIT_CMD(c, INITIALIZE, WRITE);
3896         return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
3897 }
3898
3899 /**
3900  * t4_query_params_rw - query FW or device parameters
3901  * @adap: the adapter
3902  * @mbox: mailbox to use for the FW command
3903  * @pf: the PF
3904  * @vf: the VF
3905  * @nparams: the number of parameters
3906  * @params: the parameter names
3907  * @val: the parameter values
3908  * @rw: Write and read flag
3909  *
3910  * Reads the value of FW or device parameters.  Up to 7 parameters can be
3911  * queried at once.
3912  */
3913 static int t4_query_params_rw(struct adapter *adap, unsigned int mbox,
3914                               unsigned int pf, unsigned int vf,
3915                               unsigned int nparams, const u32 *params,
3916                               u32 *val, int rw)
3917 {
3918         unsigned int i;
3919         int ret;
3920         struct fw_params_cmd c;
3921         __be32 *p = &c.param[0].mnem;
3922
3923         if (nparams > 7)
3924                 return -EINVAL;
3925
3926         memset(&c, 0, sizeof(c));
3927         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
3928                                   F_FW_CMD_REQUEST | F_FW_CMD_READ |
3929                                   V_FW_PARAMS_CMD_PFN(pf) |
3930                                   V_FW_PARAMS_CMD_VFN(vf));
3931         c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3932
3933         for (i = 0; i < nparams; i++) {
3934                 *p++ = cpu_to_be32(*params++);
3935                 if (rw)
3936                         *p = cpu_to_be32(*(val + i));
3937                 p++;
3938         }
3939
3940         ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
3941         if (ret == 0)
3942                 for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
3943                         *val++ = be32_to_cpu(*p);
3944         return ret;
3945 }
3946
3947 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
3948                     unsigned int vf, unsigned int nparams, const u32 *params,
3949                     u32 *val)
3950 {
3951         return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0);
3952 }
3953
3954 /**
3955  * t4_set_params_timeout - sets FW or device parameters
3956  * @adap: the adapter
3957  * @mbox: mailbox to use for the FW command
3958  * @pf: the PF
3959  * @vf: the VF
3960  * @nparams: the number of parameters
3961  * @params: the parameter names
3962  * @val: the parameter values
3963  * @timeout: the timeout time
3964  *
3965  * Sets the value of FW or device parameters.  Up to 7 parameters can be
3966  * specified at once.
3967  */
3968 int t4_set_params_timeout(struct adapter *adap, unsigned int mbox,
3969                           unsigned int pf, unsigned int vf,
3970                           unsigned int nparams, const u32 *params,
3971                           const u32 *val, int timeout)
3972 {
3973         struct fw_params_cmd c;
3974         __be32 *p = &c.param[0].mnem;
3975
3976         if (nparams > 7)
3977                 return -EINVAL;
3978
3979         memset(&c, 0, sizeof(c));
3980         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) |
3981                                   F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
3982                                   V_FW_PARAMS_CMD_PFN(pf) |
3983                                   V_FW_PARAMS_CMD_VFN(vf));
3984         c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3985
3986         while (nparams--) {
3987                 *p++ = cpu_to_be32(*params++);
3988                 *p++ = cpu_to_be32(*val++);
3989         }
3990
3991         return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout);
3992 }
3993
3994 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
3995                   unsigned int vf, unsigned int nparams, const u32 *params,
3996                   const u32 *val)
3997 {
3998         return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val,
3999                                      FW_CMD_MAX_TIMEOUT);
4000 }
4001
4002 /**
4003  * t4_alloc_vi_func - allocate a virtual interface
4004  * @adap: the adapter
4005  * @mbox: mailbox to use for the FW command
4006  * @port: physical port associated with the VI
4007  * @pf: the PF owning the VI
4008  * @vf: the VF owning the VI
4009  * @nmac: number of MAC addresses needed (1 to 5)
4010  * @mac: the MAC addresses of the VI
4011  * @rss_size: size of RSS table slice associated with this VI
4012  * @portfunc: which Port Application Function MAC Address is desired
4013  * @idstype: Intrusion Detection Type
4014  *
4015  * Allocates a virtual interface for the given physical port.  If @mac is
4016  * not %NULL it contains the MAC addresses of the VI as assigned by FW.
4017  * @mac should be large enough to hold @nmac Ethernet addresses, they are
4018  * stored consecutively so the space needed is @nmac * 6 bytes.
4019  * Returns a negative error number or the non-negative VI id.
4020  */
4021 int t4_alloc_vi_func(struct adapter *adap, unsigned int mbox,
4022                      unsigned int port, unsigned int pf, unsigned int vf,
4023                      unsigned int nmac, u8 *mac, unsigned int *rss_size,
4024                      unsigned int portfunc, unsigned int idstype,
4025                      u8 *vivld, u8 *vin)
4026 {
4027         int ret;
4028         struct fw_vi_cmd c;
4029
4030         memset(&c, 0, sizeof(c));
4031         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST |
4032                                   F_FW_CMD_WRITE | F_FW_CMD_EXEC |
4033                                   V_FW_VI_CMD_PFN(pf) | V_FW_VI_CMD_VFN(vf));
4034         c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_ALLOC | FW_LEN16(c));
4035         c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_TYPE(idstype) |
4036                                      V_FW_VI_CMD_FUNC(portfunc));
4037         c.portid_pkd = V_FW_VI_CMD_PORTID(port);
4038         c.nmac = nmac - 1;
4039
4040         ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
4041         if (ret)
4042                 return ret;
4043
4044         if (mac) {
4045                 memcpy(mac, c.mac, sizeof(c.mac));
4046                 switch (nmac) {
4047                 case 5:
4048                         memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
4049                         /* FALLTHROUGH */
4050                 case 4:
4051                         memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
4052                         /* FALLTHROUGH */
4053                 case 3:
4054                         memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
4055                         /* FALLTHROUGH */
4056                 case 2:
4057                         memcpy(mac + 6,  c.nmac0, sizeof(c.nmac0));
4058                         /* FALLTHROUGH */
4059                 }
4060         }
4061         if (rss_size)
4062                 *rss_size = G_FW_VI_CMD_RSSSIZE(be16_to_cpu(c.norss_rsssize));
4063         if (vivld)
4064                 *vivld = G_FW_VI_CMD_VFVLD(be32_to_cpu(c.alloc_to_len16));
4065         if (vin)
4066                 *vin = G_FW_VI_CMD_VIN(be32_to_cpu(c.alloc_to_len16));
4067         return G_FW_VI_CMD_VIID(cpu_to_be16(c.type_to_viid));
4068 }
4069
4070 /**
4071  * t4_alloc_vi - allocate an [Ethernet Function] virtual interface
4072  * @adap: the adapter
4073  * @mbox: mailbox to use for the FW command
4074  * @port: physical port associated with the VI
4075  * @pf: the PF owning the VI
4076  * @vf: the VF owning the VI
4077  * @nmac: number of MAC addresses needed (1 to 5)
4078  * @mac: the MAC addresses of the VI
4079  * @rss_size: size of RSS table slice associated with this VI
4080  *
4081  * Backwards compatible and convieniance routine to allocate a Virtual
4082  * Interface with a Ethernet Port Application Function and Intrustion
4083  * Detection System disabled.
4084  */
4085 int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
4086                 unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
4087                 unsigned int *rss_size, u8 *vivld, u8 *vin)
4088 {
4089         return t4_alloc_vi_func(adap, mbox, port, pf, vf, nmac, mac, rss_size,
4090                                 FW_VI_FUNC_ETH, 0, vivld, vin);
4091 }
4092
4093 /**
4094  * t4_free_vi - free a virtual interface
4095  * @adap: the adapter
4096  * @mbox: mailbox to use for the FW command
4097  * @pf: the PF owning the VI
4098  * @vf: the VF owning the VI
4099  * @viid: virtual interface identifiler
4100  *
4101  * Free a previously allocated virtual interface.
4102  */
4103 int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
4104                unsigned int vf, unsigned int viid)
4105 {
4106         struct fw_vi_cmd c;
4107
4108         memset(&c, 0, sizeof(c));
4109         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST |
4110                                   F_FW_CMD_EXEC);
4111         if (is_pf4(adap))
4112                 c.op_to_vfn |= cpu_to_be32(V_FW_VI_CMD_PFN(pf) |
4113                                            V_FW_VI_CMD_VFN(vf));
4114         c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_FREE | FW_LEN16(c));
4115         c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(viid));
4116
4117         if (is_pf4(adap))
4118                 return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
4119         else
4120                 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4121 }
4122
4123 /**
4124  * t4_set_rxmode - set Rx properties of a virtual interface
4125  * @adap: the adapter
4126  * @mbox: mailbox to use for the FW command
4127  * @viid: the VI id
4128  * @mtu: the new MTU or -1
4129  * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
4130  * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
4131  * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
4132  * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it,
4133  *          -1 no change
4134  * @sleep_ok: if true we may sleep while awaiting command completion
4135  *
4136  * Sets Rx properties of a virtual interface.
4137  */
4138 int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
4139                   int mtu, int promisc, int all_multi, int bcast, int vlanex,
4140                   bool sleep_ok)
4141 {
4142         struct fw_vi_rxmode_cmd c;
4143
4144         /* convert to FW values */
4145         if (mtu < 0)
4146                 mtu = M_FW_VI_RXMODE_CMD_MTU;
4147         if (promisc < 0)
4148                 promisc = M_FW_VI_RXMODE_CMD_PROMISCEN;
4149         if (all_multi < 0)
4150                 all_multi = M_FW_VI_RXMODE_CMD_ALLMULTIEN;
4151         if (bcast < 0)
4152                 bcast = M_FW_VI_RXMODE_CMD_BROADCASTEN;
4153         if (vlanex < 0)
4154                 vlanex = M_FW_VI_RXMODE_CMD_VLANEXEN;
4155
4156         memset(&c, 0, sizeof(c));
4157         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_RXMODE_CMD) |
4158                                    F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
4159                                    V_FW_VI_RXMODE_CMD_VIID(viid));
4160         c.retval_len16 = cpu_to_be32(FW_LEN16(c));
4161         c.mtu_to_vlanexen = cpu_to_be32(V_FW_VI_RXMODE_CMD_MTU(mtu) |
4162                             V_FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
4163                             V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
4164                             V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast) |
4165                             V_FW_VI_RXMODE_CMD_VLANEXEN(vlanex));
4166         if (is_pf4(adap))
4167                 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL,
4168                                        sleep_ok);
4169         else
4170                 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4171 }
4172
4173 /**
4174  *      t4_alloc_raw_mac_filt - Adds a raw mac entry in mps tcam
4175  *      @adap: the adapter
4176  *      @viid: the VI id
4177  *      @mac: the MAC address
4178  *      @mask: the mask
4179  *      @idx: index at which to add this entry
4180  *      @port_id: the port index
4181  *      @lookup_type: MAC address for inner (1) or outer (0) header
4182  *      @sleep_ok: call is allowed to sleep
4183  *
4184  *      Adds the mac entry at the specified index using raw mac interface.
4185  *
4186  *      Returns a negative error number or the allocated index for this mac.
4187  */
4188 int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
4189                           const u8 *addr, const u8 *mask, unsigned int idx,
4190                           u8 lookup_type, u8 port_id, bool sleep_ok)
4191 {
4192         int ret = 0;
4193         struct fw_vi_mac_cmd c;
4194         struct fw_vi_mac_raw *p = &c.u.raw;
4195         u32 val;
4196
4197         memset(&c, 0, sizeof(c));
4198         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
4199                                    F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
4200                                    V_FW_VI_MAC_CMD_VIID(viid));
4201         val = V_FW_CMD_LEN16(1) |
4202               V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
4203         c.freemacs_to_len16 = cpu_to_be32(val);
4204
4205         /* Specify that this is an inner mac address */
4206         p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx));
4207
4208         /* Lookup Type. Outer header: 0, Inner header: 1 */
4209         p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
4210                                    V_DATAPORTNUM(port_id));
4211         /* Lookup mask and port mask */
4212         p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
4213                                     V_DATAPORTNUM(M_DATAPORTNUM));
4214
4215         /* Copy the address and the mask */
4216         memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
4217         memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
4218
4219         ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
4220         if (ret == 0) {
4221                 ret = G_FW_VI_MAC_CMD_RAW_IDX(be32_to_cpu(p->raw_idx_pkd));
4222                 if (ret != (int)idx)
4223                         ret = -ENOMEM;
4224         }
4225
4226         return ret;
4227 }
4228
4229 /**
4230  *      t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
4231  *      @adap: the adapter
4232  *      @viid: the VI id
4233  *      @addr: the MAC address
4234  *      @mask: the mask
4235  *      @idx: index of the entry in mps tcam
4236  *      @lookup_type: MAC address for inner (1) or outer (0) header
4237  *      @port_id: the port index
4238  *      @sleep_ok: call is allowed to sleep
4239  *
4240  *      Removes the mac entry at the specified index using raw mac interface.
4241  *
4242  *      Returns a negative error number on failure.
4243  */
4244 int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
4245                          const u8 *addr, const u8 *mask, unsigned int idx,
4246                          u8 lookup_type, u8 port_id, bool sleep_ok)
4247 {
4248         struct fw_vi_mac_cmd c;
4249         struct fw_vi_mac_raw *p = &c.u.raw;
4250         u32 raw;
4251
4252         memset(&c, 0, sizeof(c));
4253         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
4254                                    F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
4255                                    V_FW_CMD_EXEC(0) |
4256                                    V_FW_VI_MAC_CMD_VIID(viid));
4257         raw = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
4258         c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0U) |
4259                                           raw |
4260                                           V_FW_CMD_LEN16(1));
4261
4262         p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx) |
4263                                      FW_VI_MAC_ID_BASED_FREE);
4264
4265         /* Lookup Type. Outer header: 0, Inner header: 1 */
4266         p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
4267                                    V_DATAPORTNUM(port_id));
4268         /* Lookup mask and port mask */
4269         p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
4270                                     V_DATAPORTNUM(M_DATAPORTNUM));
4271
4272         /* Copy the address and the mask */
4273         memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
4274         memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
4275
4276         return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
4277 }
4278
4279 /**
4280  * t4_change_mac - modifies the exact-match filter for a MAC address
4281  * @adap: the adapter
4282  * @mbox: mailbox to use for the FW command
4283  * @viid: the VI id
4284  * @idx: index of existing filter for old value of MAC address, or -1
4285  * @addr: the new MAC address value
4286  * @persist: whether a new MAC allocation should be persistent
4287  * @add_smt: if true also add the address to the HW SMT
4288  *
4289  * Modifies an exact-match filter and sets it to the new MAC address if
4290  * @idx >= 0, or adds the MAC address to a new filter if @idx < 0.  In the
4291  * latter case the address is added persistently if @persist is %true.
4292  *
4293  * Note that in general it is not possible to modify the value of a given
4294  * filter so the generic way to modify an address filter is to free the one
4295  * being used by the old address value and allocate a new filter for the
4296  * new address value.
4297  *
4298  * Returns a negative error number or the index of the filter with the new
4299  * MAC value.  Note that this index may differ from @idx.
4300  */
4301 int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
4302                   int idx, const u8 *addr, bool persist, bool add_smt)
4303 {
4304         int ret, mode;
4305         struct fw_vi_mac_cmd c;
4306         struct fw_vi_mac_exact *p = c.u.exact;
4307         int max_mac_addr = adap->params.arch.mps_tcam_size;
4308
4309         if (idx < 0)                             /* new allocation */
4310                 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
4311         mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
4312
4313         memset(&c, 0, sizeof(c));
4314         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
4315                                    F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
4316                                    V_FW_VI_MAC_CMD_VIID(viid));
4317         c.freemacs_to_len16 = cpu_to_be32(V_FW_CMD_LEN16(1));
4318         p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID |
4319                                       V_FW_VI_MAC_CMD_SMAC_RESULT(mode) |
4320                                       V_FW_VI_MAC_CMD_IDX(idx));
4321         memcpy(p->macaddr, addr, sizeof(p->macaddr));
4322
4323         if (is_pf4(adap))
4324                 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
4325         else
4326                 ret = t4vf_wr_mbox(adap, &c, sizeof(c), &c);
4327         if (ret == 0) {
4328                 ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx));
4329                 if (ret >= max_mac_addr)
4330                         ret = -ENOMEM;
4331         }
4332         return ret;
4333 }
4334
4335 /**
4336  * t4_enable_vi_params - enable/disable a virtual interface
4337  * @adap: the adapter
4338  * @mbox: mailbox to use for the FW command
4339  * @viid: the VI id
4340  * @rx_en: 1=enable Rx, 0=disable Rx
4341  * @tx_en: 1=enable Tx, 0=disable Tx
4342  * @dcb_en: 1=enable delivery of Data Center Bridging messages.
4343  *
4344  * Enables/disables a virtual interface.  Note that setting DCB Enable
4345  * only makes sense when enabling a Virtual Interface ...
4346  */
4347 int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
4348                         unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
4349 {
4350         struct fw_vi_enable_cmd c;
4351
4352         memset(&c, 0, sizeof(c));
4353         c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_ENABLE_CMD) |
4354                                    F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
4355                                    V_FW_VI_ENABLE_CMD_VIID(viid));
4356         c.ien_to_len16 = cpu_to_be32(V_FW_VI_ENABLE_CMD_IEN(rx_en) |
4357                                      V_FW_VI_ENABLE_CMD_EEN(tx_en) |
4358                                      V_FW_VI_ENABLE_CMD_DCB_INFO(dcb_en) |
4359                                      FW_LEN16(c));
4360         if (is_pf4(adap))
4361                 return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
4362         else
4363                 return t4vf_wr_mbox_ns(adap, &c, sizeof(c), NULL);
4364 }
4365
4366 /**
4367  * t4_enable_vi - enable/disable a virtual interface
4368  * @adap: the adapter
4369  * @mbox: mailbox to use for the FW command
4370  * @viid: the VI id
4371  * @rx_en: 1=enable Rx, 0=disable Rx
4372  * @tx_en: 1=enable Tx, 0=disable Tx
4373  *
4374  * Enables/disables a virtual interface.  Note that setting DCB Enable
4375  * only makes sense when enabling a Virtual Interface ...
4376  */
4377 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
4378                  bool rx_en, bool tx_en)
4379 {
4380         return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
4381 }
4382
4383 /**
4384  * t4_iq_start_stop - enable/disable an ingress queue and its FLs
4385  * @adap: the adapter
4386  * @mbox: mailbox to use for the FW command
4387  * @start: %true to enable the queues, %false to disable them
4388  * @pf: the PF owning the queues
4389  * @vf: the VF owning the queues
4390  * @iqid: ingress queue id
4391  * @fl0id: FL0 queue id or 0xffff if no attached FL0
4392  * @fl1id: FL1 queue id or 0xffff if no attached FL1
4393  *
4394  * Starts or stops an ingress queue and its associated FLs, if any.
4395  */
4396 int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start,
4397                      unsigned int pf, unsigned int vf, unsigned int iqid,
4398                      unsigned int fl0id, unsigned int fl1id)
4399 {
4400         struct fw_iq_cmd c;
4401
4402         memset(&c, 0, sizeof(c));
4403         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
4404                                   F_FW_CMD_EXEC);
4405         c.alloc_to_len16 = cpu_to_be32(V_FW_IQ_CMD_IQSTART(start) |
4406                                        V_FW_IQ_CMD_IQSTOP(!start) |
4407                                        FW_LEN16(c));
4408         c.iqid = cpu_to_be16(iqid);
4409         c.fl0id = cpu_to_be16(fl0id);
4410         c.fl1id = cpu_to_be16(fl1id);
4411         if (is_pf4(adap)) {
4412                 c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) |
4413                                            V_FW_IQ_CMD_VFN(vf));
4414                 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4415         } else {
4416                 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4417         }
4418 }
4419
4420 /**
4421  * t4_iq_free - free an ingress queue and its FLs
4422  * @adap: the adapter
4423  * @mbox: mailbox to use for the FW command
4424  * @pf: the PF owning the queues
4425  * @vf: the VF owning the queues
4426  * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
4427  * @iqid: ingress queue id
4428  * @fl0id: FL0 queue id or 0xffff if no attached FL0
4429  * @fl1id: FL1 queue id or 0xffff if no attached FL1
4430  *
4431  * Frees an ingress queue and its associated FLs, if any.
4432  */
4433 int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
4434                unsigned int vf, unsigned int iqtype, unsigned int iqid,
4435                unsigned int fl0id, unsigned int fl1id)
4436 {
4437         struct fw_iq_cmd c;
4438
4439         memset(&c, 0, sizeof(c));
4440         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
4441                                   F_FW_CMD_EXEC);
4442         if (is_pf4(adap))
4443                 c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) |
4444                                            V_FW_IQ_CMD_VFN(vf));
4445         c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_FREE | FW_LEN16(c));
4446         c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype));
4447         c.iqid = cpu_to_be16(iqid);
4448         c.fl0id = cpu_to_be16(fl0id);
4449         c.fl1id = cpu_to_be16(fl1id);
4450         if (is_pf4(adap))
4451                 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4452         else
4453                 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4454 }
4455
4456 /**
4457  * t4_eth_eq_free - free an Ethernet egress queue
4458  * @adap: the adapter
4459  * @mbox: mailbox to use for the FW command
4460  * @pf: the PF owning the queue
4461  * @vf: the VF owning the queue
4462  * @eqid: egress queue id
4463  *
4464  * Frees an Ethernet egress queue.
4465  */
4466 int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
4467                    unsigned int vf, unsigned int eqid)
4468 {
4469         struct fw_eq_eth_cmd c;
4470
4471         memset(&c, 0, sizeof(c));
4472         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) |
4473                                   F_FW_CMD_REQUEST | F_FW_CMD_EXEC);
4474         if (is_pf4(adap))
4475                 c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) |
4476                                            V_FW_IQ_CMD_VFN(vf));
4477         c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c));
4478         c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid));
4479         if (is_pf4(adap))
4480                 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4481         else
4482                 return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
4483 }
4484
4485 /**
4486  * t4_link_down_rc_str - return a string for a Link Down Reason Code
4487  * @link_down_rc: Link Down Reason Code
4488  *
4489  * Returns a string representation of the Link Down Reason Code.
4490  */
4491 static const char *t4_link_down_rc_str(unsigned char link_down_rc)
4492 {
4493         static const char * const reason[] = {
4494                 "Link Down",
4495                 "Remote Fault",
4496                 "Auto-negotiation Failure",
4497                 "Reserved",
4498                 "Insufficient Airflow",
4499                 "Unable To Determine Reason",
4500                 "No RX Signal Detected",
4501                 "Reserved",
4502         };
4503
4504         if (link_down_rc >= ARRAY_SIZE(reason))
4505                 return "Bad Reason Code";
4506
4507         return reason[link_down_rc];
4508 }
4509
4510 /* Return the highest speed set in the port capabilities, in Mb/s. */
4511 static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
4512 {
4513 #define TEST_SPEED_RETURN(__caps_speed, __speed) \
4514         do { \
4515                 if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
4516                         return __speed; \
4517         } while (0)
4518
4519         TEST_SPEED_RETURN(100G, 100000);
4520         TEST_SPEED_RETURN(50G,   50000);
4521         TEST_SPEED_RETURN(40G,   40000);
4522         TEST_SPEED_RETURN(25G,   25000);
4523         TEST_SPEED_RETURN(10G,   10000);
4524         TEST_SPEED_RETURN(1G,     1000);
4525         TEST_SPEED_RETURN(100M,    100);
4526
4527 #undef TEST_SPEED_RETURN
4528
4529         return 0;
4530 }
4531
4532 /**
4533  * t4_handle_get_port_info - process a FW reply message
4534  * @pi: the port info
4535  * @rpl: start of the FW message
4536  *
4537  * Processes a GET_PORT_INFO FW reply message.
4538  */
4539 static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
4540 {
4541         const struct fw_port_cmd *cmd = (const void *)rpl;
4542         int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(cmd->action_to_len16));
4543         fw_port_cap32_t pcaps, acaps, linkattr;
4544         struct link_config *lc = &pi->link_cfg;
4545         struct adapter *adapter = pi->adapter;
4546         enum fw_port_module_type mod_type;
4547         enum fw_port_type port_type;
4548         unsigned int speed, fc, fec;
4549         int link_ok, linkdnrc;
4550
4551         /* Extract the various fields from the Port Information message.
4552          */
4553         switch (action) {
4554         case FW_PORT_ACTION_GET_PORT_INFO: {
4555                 u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
4556
4557                 link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS) != 0;
4558                 linkdnrc = G_FW_PORT_CMD_LINKDNRC(lstatus);
4559                 port_type = G_FW_PORT_CMD_PTYPE(lstatus);
4560                 mod_type = G_FW_PORT_CMD_MODTYPE(lstatus);
4561                 pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
4562                 acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
4563
4564                 /* Unfortunately the format of the Link Status in the old
4565                  * 16-bit Port Information message isn't the same as the
4566                  * 16-bit Port Capabilities bitfield used everywhere else ...
4567                  */
4568                 linkattr = 0;
4569                 if (lstatus & F_FW_PORT_CMD_RXPAUSE)
4570                         linkattr |= FW_PORT_CAP32_FC_RX;
4571                 if (lstatus & F_FW_PORT_CMD_TXPAUSE)
4572                         linkattr |= FW_PORT_CAP32_FC_TX;
4573                 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
4574                         linkattr |= FW_PORT_CAP32_SPEED_100M;
4575                 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
4576                         linkattr |= FW_PORT_CAP32_SPEED_1G;
4577                 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
4578                         linkattr |= FW_PORT_CAP32_SPEED_10G;
4579                 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G))
4580                         linkattr |= FW_PORT_CAP32_SPEED_25G;
4581                 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
4582                         linkattr |= FW_PORT_CAP32_SPEED_40G;
4583                 if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G))
4584                         linkattr |= FW_PORT_CAP32_SPEED_100G;
4585
4586                 break;
4587                 }
4588
4589         case FW_PORT_ACTION_GET_PORT_INFO32: {
4590                 u32 lstatus32 =
4591                         be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
4592
4593                 link_ok = (lstatus32 & F_FW_PORT_CMD_LSTATUS32) != 0;
4594                 linkdnrc = G_FW_PORT_CMD_LINKDNRC32(lstatus32);
4595                 port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
4596                 mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus32);
4597                 pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
4598                 acaps = be32_to_cpu(cmd->u.info32.acaps32);
4599                 linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
4600                 break;
4601                 }
4602
4603         default:
4604                 dev_warn(adapter, "Handle Port Information: Bad Command/Action %#x\n",
4605                          be32_to_cpu(cmd->action_to_len16));
4606                 return;
4607         }
4608
4609         fec = fwcap_to_cc_fec(acaps);
4610
4611         fc = fwcap_to_cc_pause(linkattr);
4612         speed = fwcap_to_speed(linkattr);
4613
4614         if (mod_type != pi->mod_type) {
4615                 lc->auto_fec = fec;
4616                 pi->port_type = port_type;
4617                 pi->mod_type = mod_type;
4618                 t4_os_portmod_changed(adapter, pi->pidx);
4619         }
4620         if (link_ok != lc->link_ok || speed != lc->speed ||
4621             fc != lc->fc || fec != lc->fec) { /* something changed */
4622                 if (!link_ok && lc->link_ok) {
4623                         lc->link_down_rc = linkdnrc;
4624                         dev_warn(adap, "Port %d link down, reason: %s\n",
4625                                  pi->tx_chan, t4_link_down_rc_str(linkdnrc));
4626                 }
4627                 lc->link_ok = link_ok;
4628                 lc->speed = speed;
4629                 lc->fc = fc;
4630                 lc->fec = fec;
4631                 lc->pcaps = pcaps;
4632                 lc->acaps = acaps & ADVERT_MASK;
4633
4634                 if (lc->acaps & FW_PORT_CAP32_ANEG) {
4635                         lc->autoneg = AUTONEG_ENABLE;
4636                 } else {
4637                         /* When Autoneg is disabled, user needs to set
4638                          * single speed.
4639                          * Similar to cxgb4_ethtool.c: set_link_ksettings
4640                          */
4641                         lc->acaps = 0;
4642                         lc->requested_speed = fwcap_to_speed(acaps);
4643                         lc->autoneg = AUTONEG_DISABLE;
4644                 }
4645         }
4646 }
4647
4648 /**
4649  * t4_ctrl_eq_free - free a control egress queue
4650  * @adap: the adapter
4651  * @mbox: mailbox to use for the FW command
4652  * @pf: the PF owning the queue
4653  * @vf: the VF owning the queue
4654  * @eqid: egress queue id
4655  *
4656  * Frees a control egress queue.
4657  */
4658 int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
4659                     unsigned int vf, unsigned int eqid)
4660 {
4661         struct fw_eq_ctrl_cmd c;
4662
4663         memset(&c, 0, sizeof(c));
4664         c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) |
4665                                   F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
4666                                   V_FW_EQ_CTRL_CMD_PFN(pf) |
4667                                   V_FW_EQ_CTRL_CMD_VFN(vf));
4668         c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c));
4669         c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid));
4670         return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4671 }
4672
4673 /**
4674  * t4_handle_fw_rpl - process a FW reply message
4675  * @adap: the adapter
4676  * @rpl: start of the FW message
4677  *
4678  * Processes a FW message, such as link state change messages.
4679  */
4680 int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
4681 {
4682         u8 opcode = *(const u8 *)rpl;
4683
4684         /*
4685          * This might be a port command ... this simplifies the following
4686          * conditionals ...  We can get away with pre-dereferencing
4687          * action_to_len16 because it's in the first 16 bytes and all messages
4688          * will be at least that long.
4689          */
4690         const struct fw_port_cmd *p = (const void *)rpl;
4691         unsigned int action =
4692                 G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16));
4693
4694         if (opcode == FW_PORT_CMD &&
4695             (action == FW_PORT_ACTION_GET_PORT_INFO ||
4696              action == FW_PORT_ACTION_GET_PORT_INFO32)) {
4697                 /* link/module state change message */
4698                 int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid));
4699                 struct port_info *pi = NULL;
4700                 int i;
4701
4702                 for_each_port(adap, i) {
4703                         pi = adap2pinfo(adap, i);
4704                         if (pi->tx_chan == chan)
4705                                 break;
4706                 }
4707
4708                 t4_handle_get_port_info(pi, rpl);
4709         } else {
4710                 dev_warn(adap, "Unknown firmware reply %d\n", opcode);
4711                 return -EINVAL;
4712         }
4713         return 0;
4714 }
4715
4716 void t4_reset_link_config(struct adapter *adap, int idx)
4717 {
4718         struct port_info *pi = adap2pinfo(adap, idx);
4719         struct link_config *lc = &pi->link_cfg;
4720
4721         lc->link_ok = 0;
4722         lc->requested_speed = 0;
4723         lc->requested_fc = 0;
4724         lc->speed = 0;
4725         lc->fc = 0;
4726 }
4727
4728 /**
4729  * init_link_config - initialize a link's SW state
4730  * @lc: structure holding the link state
4731  * @pcaps: link Port Capabilities
4732  * @acaps: link current Advertised Port Capabilities
4733  *
4734  * Initializes the SW state maintained for each link, including the link's
4735  * capabilities and default speed/flow-control/autonegotiation settings.
4736  */
4737 void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
4738                       fw_port_cap32_t acaps)
4739 {
4740         lc->pcaps = pcaps;
4741         lc->requested_speed = 0;
4742         lc->speed = 0;
4743         lc->requested_fc = 0;
4744         lc->fc = 0;
4745
4746         /**
4747          * For Forward Error Control, we default to whatever the Firmware
4748          * tells us the Link is currently advertising.
4749          */
4750         lc->auto_fec = fwcap_to_cc_fec(acaps);
4751         lc->requested_fec = FEC_AUTO;
4752         lc->fec = lc->auto_fec;
4753
4754         if (lc->pcaps & FW_PORT_CAP32_ANEG) {
4755                 lc->acaps = lc->pcaps & ADVERT_MASK;
4756                 lc->autoneg = AUTONEG_ENABLE;
4757                 lc->requested_fc |= PAUSE_AUTONEG;
4758         } else {
4759                 lc->acaps = 0;
4760                 lc->autoneg = AUTONEG_DISABLE;
4761         }
4762 }
4763
4764 /**
4765  * t4_wait_dev_ready - wait till to reads of registers work
4766  *
4767  * Right after the device is RESET is can take a small amount of time
4768  * for it to respond to register reads.  Until then, all reads will
4769  * return either 0xff...ff or 0xee...ee.  Return an error if reads
4770  * don't work within a reasonable time frame.
4771  */
4772 static int t4_wait_dev_ready(struct adapter *adapter)
4773 {
4774         u32 whoami;
4775
4776         whoami = t4_read_reg(adapter, A_PL_WHOAMI);
4777
4778         if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS)
4779                 return 0;
4780
4781         msleep(500);
4782         whoami = t4_read_reg(adapter, A_PL_WHOAMI);
4783         if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS)
4784                 return 0;
4785
4786         dev_err(adapter, "Device didn't become ready for access, whoami = %#x\n",
4787                 whoami);
4788         return -EIO;
4789 }
4790
4791 struct flash_desc {
4792         u32 vendor_and_model_id;
4793         u32 size_mb;
4794 };
4795
4796 int t4_get_flash_params(struct adapter *adapter)
4797 {
4798         /*
4799          * Table for non-standard supported Flash parts.  Note, all Flash
4800          * parts must have 64KB sectors.
4801          */
4802         static struct flash_desc supported_flash[] = {
4803                 { 0x00150201, 4 << 20 },       /* Spansion 4MB S25FL032P */
4804         };
4805
4806         int ret;
4807         u32 flashid = 0;
4808         unsigned int part, manufacturer;
4809         unsigned int density, size = 0;
4810
4811         /**
4812          * Issue a Read ID Command to the Flash part.  We decode supported
4813          * Flash parts and their sizes from this.  There's a newer Query
4814          * Command which can retrieve detailed geometry information but
4815          * many Flash parts don't support it.
4816          */
4817         ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID);
4818         if (!ret)
4819                 ret = sf1_read(adapter, 3, 0, 1, &flashid);
4820         t4_write_reg(adapter, A_SF_OP, 0);               /* unlock SF */
4821         if (ret < 0)
4822                 return ret;
4823
4824         /**
4825          * Check to see if it's one of our non-standard supported Flash parts.
4826          */
4827         for (part = 0; part < ARRAY_SIZE(supported_flash); part++) {
4828                 if (supported_flash[part].vendor_and_model_id == flashid) {
4829                         adapter->params.sf_size =
4830                                 supported_flash[part].size_mb;
4831                         adapter->params.sf_nsec =
4832                                 adapter->params.sf_size / SF_SEC_SIZE;
4833                         goto found;
4834                 }
4835         }
4836
4837         /**
4838          * Decode Flash part size.  The code below looks repetative with
4839          * common encodings, but that's not guaranteed in the JEDEC
4840          * specification for the Read JADEC ID command.  The only thing that
4841          * we're guaranteed by the JADEC specification is where the
4842          * Manufacturer ID is in the returned result.  After that each
4843          * Manufacturer ~could~ encode things completely differently.
4844          * Note, all Flash parts must have 64KB sectors.
4845          */
4846         manufacturer = flashid & 0xff;
4847         switch (manufacturer) {
4848         case 0x20: { /* Micron/Numonix */
4849                 /**
4850                  * This Density -> Size decoding table is taken from Micron
4851                  * Data Sheets.
4852                  */
4853                 density = (flashid >> 16) & 0xff;
4854                 switch (density) {
4855                 case 0x14:
4856                         size = 1 << 20; /* 1MB */
4857                         break;
4858                 case 0x15:
4859                         size = 1 << 21; /* 2MB */
4860                         break;
4861                 case 0x16:
4862                         size = 1 << 22; /* 4MB */
4863                         break;
4864                 case 0x17:
4865                         size = 1 << 23; /* 8MB */
4866                         break;
4867                 case 0x18:
4868                         size = 1 << 24; /* 16MB */
4869                         break;
4870                 case 0x19:
4871                         size = 1 << 25; /* 32MB */
4872                         break;
4873                 case 0x20:
4874                         size = 1 << 26; /* 64MB */
4875                         break;
4876                 case 0x21:
4877                         size = 1 << 27; /* 128MB */
4878                         break;
4879                 case 0x22:
4880                         size = 1 << 28; /* 256MB */
4881                         break;
4882                 }
4883                 break;
4884         }
4885
4886         case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
4887                 /**
4888                  * This Density -> Size decoding table is taken from ISSI
4889                  * Data Sheets.
4890                  */
4891                 density = (flashid >> 16) & 0xff;
4892                 switch (density) {
4893                 case 0x16:
4894                         size = 1 << 25; /* 32MB */
4895                         break;
4896                 case 0x17:
4897                         size = 1 << 26; /* 64MB */
4898                         break;
4899                 }
4900                 break;
4901         }
4902
4903         case 0xc2: { /* Macronix */
4904                 /**
4905                  * This Density -> Size decoding table is taken from Macronix
4906                  * Data Sheets.
4907                  */
4908                 density = (flashid >> 16) & 0xff;
4909                 switch (density) {
4910                 case 0x17:
4911                         size = 1 << 23; /* 8MB */
4912                         break;
4913                 case 0x18:
4914                         size = 1 << 24; /* 16MB */
4915                         break;
4916                 }
4917                 break;
4918         }
4919
4920         case 0xef: { /* Winbond */
4921                 /**
4922                  * This Density -> Size decoding table is taken from Winbond
4923                  * Data Sheets.
4924                  */
4925                 density = (flashid >> 16) & 0xff;
4926                 switch (density) {
4927                 case 0x17:
4928                         size = 1 << 23; /* 8MB */
4929                         break;
4930                 case 0x18:
4931                         size = 1 << 24; /* 16MB */
4932                         break;
4933                 }
4934                 break;
4935         }
4936         }
4937
4938         /* If we didn't recognize the FLASH part, that's no real issue: the
4939          * Hardware/Software contract says that Hardware will _*ALWAYS*_
4940          * use a FLASH part which is at least 4MB in size and has 64KB
4941          * sectors.  The unrecognized FLASH part is likely to be much larger
4942          * than 4MB, but that's all we really need.
4943          */
4944         if (size == 0) {
4945                 dev_warn(adapter,
4946                          "Unknown Flash Part, ID = %#x, assuming 4MB\n",
4947                          flashid);
4948                 size = 1 << 22;
4949         }
4950
4951         /**
4952          * Store decoded Flash size and fall through into vetting code.
4953          */
4954         adapter->params.sf_size = size;
4955         adapter->params.sf_nsec = size / SF_SEC_SIZE;
4956
4957 found:
4958         /*
4959          * We should reject adapters with FLASHes which are too small. So, emit
4960          * a warning.
4961          */
4962         if (adapter->params.sf_size < FLASH_MIN_SIZE)
4963                 dev_warn(adapter, "WARNING: Flash Part ID %#x, size %#x < %#x\n",
4964                          flashid, adapter->params.sf_size, FLASH_MIN_SIZE);
4965
4966         return 0;
4967 }
4968
4969 static void set_pcie_completion_timeout(struct adapter *adapter,
4970                                         u8 range)
4971 {
4972         u32 pcie_cap;
4973         u16 val;
4974
4975         pcie_cap = t4_os_find_pci_capability(adapter, PCI_CAP_ID_EXP);
4976         if (pcie_cap) {
4977                 t4_os_pci_read_cfg2(adapter, pcie_cap + PCI_EXP_DEVCTL2, &val);
4978                 val &= 0xfff0;
4979                 val |= range;
4980                 t4_os_pci_write_cfg2(adapter, pcie_cap + PCI_EXP_DEVCTL2, val);
4981         }
4982 }
4983
4984 /**
4985  * t4_get_chip_type - Determine chip type from device ID
4986  * @adap: the adapter
4987  * @ver: adapter version
4988  */
4989 int t4_get_chip_type(struct adapter *adap, int ver)
4990 {
4991         enum chip_type chip = 0;
4992         u32 pl_rev = G_REV(t4_read_reg(adap, A_PL_REV));
4993
4994         /* Retrieve adapter's device ID */
4995         switch (ver) {
4996         case CHELSIO_T5:
4997                 chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
4998                 break;
4999         case CHELSIO_T6:
5000                 chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
5001                 break;
5002         default:
5003                 dev_err(adap, "Device %d is not supported\n",
5004                         adap->params.pci.device_id);
5005                 return -EINVAL;
5006         }
5007
5008         return chip;
5009 }
5010
5011 /**
5012  * t4_prep_adapter - prepare SW and HW for operation
5013  * @adapter: the adapter
5014  *
5015  * Initialize adapter SW state for the various HW modules, set initial
5016  * values for some adapter tunables, take PHYs out of reset, and
5017  * initialize the MDIO interface.
5018  */
5019 int t4_prep_adapter(struct adapter *adapter)
5020 {
5021         int ret, ver;
5022         u32 pl_rev;
5023
5024         ret = t4_wait_dev_ready(adapter);
5025         if (ret < 0)
5026                 return ret;
5027
5028         pl_rev = G_REV(t4_read_reg(adapter, A_PL_REV));
5029         adapter->params.pci.device_id = adapter->pdev->id.device_id;
5030         adapter->params.pci.vendor_id = adapter->pdev->id.vendor_id;
5031
5032         /*
5033          * WE DON'T NEED adapter->params.chip CODE ONCE PL_REV CONTAINS
5034          * ADAPTER (VERSION << 4 | REVISION)
5035          */
5036         ver = CHELSIO_PCI_ID_VER(adapter->params.pci.device_id);
5037         adapter->params.chip = 0;
5038         switch (ver) {
5039         case CHELSIO_T5:
5040                 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
5041                 adapter->params.arch.sge_fl_db = F_DBPRIO | F_DBTYPE;
5042                 adapter->params.arch.mps_tcam_size =
5043                                                 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
5044                 adapter->params.arch.mps_rplc_size = 128;
5045                 adapter->params.arch.nchan = NCHAN;
5046                 adapter->params.arch.vfcount = 128;
5047                 /* Congestion map is for 4 channels so that
5048                  * MPS can have 4 priority per port.
5049                  */
5050                 adapter->params.arch.cng_ch_bits_log = 2;
5051                 break;
5052         case CHELSIO_T6:
5053                 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
5054                 adapter->params.arch.sge_fl_db = 0;
5055                 adapter->params.arch.mps_tcam_size =
5056                                                 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
5057                 adapter->params.arch.mps_rplc_size = 256;
5058                 adapter->params.arch.nchan = 2;
5059                 adapter->params.arch.vfcount = 256;
5060                 /* Congestion map is for 2 channels so that
5061                  * MPS can have 8 priority per port.
5062                  */
5063                 adapter->params.arch.cng_ch_bits_log = 3;
5064                 break;
5065         default:
5066                 dev_err(adapter, "%s: Device %d is not supported\n",
5067                         __func__, adapter->params.pci.device_id);
5068                 return -EINVAL;
5069         }
5070
5071         adapter->params.pci.vpd_cap_addr =
5072                 t4_os_find_pci_capability(adapter, PCI_CAP_ID_VPD);
5073
5074         ret = t4_get_flash_params(adapter);
5075         if (ret < 0) {
5076                 dev_err(adapter, "Unable to retrieve Flash Parameters, ret = %d\n",
5077                         -ret);
5078                 return ret;
5079         }
5080
5081         adapter->params.cim_la_size = CIMLA_SIZE;
5082
5083         init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
5084
5085         /*
5086          * Default port and clock for debugging in case we can't reach FW.
5087          */
5088         adapter->params.nports = 1;
5089         adapter->params.portvec = 1;
5090         adapter->params.vpd.cclk = 50000;
5091
5092         /* Set pci completion timeout value to 4 seconds. */
5093         set_pcie_completion_timeout(adapter, 0xd);
5094         return 0;
5095 }
5096
5097 /**
5098  * t4_bar2_sge_qregs - return BAR2 SGE Queue register information
5099  * @adapter: the adapter
5100  * @qid: the Queue ID
5101  * @qtype: the Ingress or Egress type for @qid
5102  * @pbar2_qoffset: BAR2 Queue Offset
5103  * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
5104  *
5105  * Returns the BAR2 SGE Queue Registers information associated with the
5106  * indicated Absolute Queue ID.  These are passed back in return value
5107  * pointers.  @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
5108  * and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
5109  *
5110  * This may return an error which indicates that BAR2 SGE Queue
5111  * registers aren't available.  If an error is not returned, then the
5112  * following values are returned:
5113  *
5114  *   *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
5115  *   *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
5116  *
5117  * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
5118  * require the "Inferred Queue ID" ability may be used.  E.g. the
5119  * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
5120  * then these "Inferred Queue ID" register may not be used.
5121  */
5122 int t4_bar2_sge_qregs(struct adapter *adapter, unsigned int qid,
5123                       enum t4_bar2_qtype qtype, u64 *pbar2_qoffset,
5124                       unsigned int *pbar2_qid)
5125 {
5126         unsigned int page_shift, page_size, qpp_shift, qpp_mask;
5127         u64 bar2_page_offset, bar2_qoffset;
5128         unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred;
5129
5130         /*
5131          * T4 doesn't support BAR2 SGE Queue registers.
5132          */
5133         if (is_t4(adapter->params.chip))
5134                 return -EINVAL;
5135
5136         /*
5137          * Get our SGE Page Size parameters.
5138          */
5139         page_shift = adapter->params.sge.hps + 10;
5140         page_size = 1 << page_shift;
5141
5142         /*
5143          * Get the right Queues per Page parameters for our Queue.
5144          */
5145         qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS ?
5146                               adapter->params.sge.eq_qpp :
5147                               adapter->params.sge.iq_qpp);
5148         qpp_mask = (1 << qpp_shift) - 1;
5149
5150         /*
5151          * Calculate the basics of the BAR2 SGE Queue register area:
5152          *  o The BAR2 page the Queue registers will be in.
5153          *  o The BAR2 Queue ID.
5154          *  o The BAR2 Queue ID Offset into the BAR2 page.
5155          */
5156         bar2_page_offset = ((qid >> qpp_shift) << page_shift);
5157         bar2_qid = qid & qpp_mask;
5158         bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;
5159
5160         /*
5161          * If the BAR2 Queue ID Offset is less than the Page Size, then the
5162          * hardware will infer the Absolute Queue ID simply from the writes to
5163          * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
5164          * BAR2 Queue ID of 0 for those writes).  Otherwise, we'll simply
5165          * write to the first BAR2 SGE Queue Area within the BAR2 Page with
5166          * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
5167          * from the BAR2 Page and BAR2 Queue ID.
5168          *
5169          * One important censequence of this is that some BAR2 SGE registers
5170          * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
5171          * there.  But other registers synthesize the SGE Queue ID purely
5172          * from the writes to the registers -- the Write Combined Doorbell
5173          * Buffer is a good example.  These BAR2 SGE Registers are only
5174          * available for those BAR2 SGE Register areas where the SGE Absolute
5175          * Queue ID can be inferred from simple writes.
5176          */
5177         bar2_qoffset = bar2_page_offset;
5178         bar2_qinferred = (bar2_qid_offset < page_size);
5179         if (bar2_qinferred) {
5180                 bar2_qoffset += bar2_qid_offset;
5181                 bar2_qid = 0;
5182         }
5183
5184         *pbar2_qoffset = bar2_qoffset;
5185         *pbar2_qid = bar2_qid;
5186         return 0;
5187 }
5188
5189 /**
5190  * t4_init_sge_params - initialize adap->params.sge
5191  * @adapter: the adapter
5192  *
5193  * Initialize various fields of the adapter's SGE Parameters structure.
5194  */
5195 int t4_init_sge_params(struct adapter *adapter)
5196 {
5197         struct sge_params *sge_params = &adapter->params.sge;
5198         u32 hps, qpp;
5199         unsigned int s_hps, s_qpp;
5200
5201         /*
5202          * Extract the SGE Page Size for our PF.
5203          */
5204         hps = t4_read_reg(adapter, A_SGE_HOST_PAGE_SIZE);
5205         s_hps = (S_HOSTPAGESIZEPF0 + (S_HOSTPAGESIZEPF1 - S_HOSTPAGESIZEPF0) *
5206                  adapter->pf);
5207         sge_params->hps = ((hps >> s_hps) & M_HOSTPAGESIZEPF0);
5208
5209         /*
5210          * Extract the SGE Egress and Ingess Queues Per Page for our PF.
5211          */
5212         s_qpp = (S_QUEUESPERPAGEPF0 +
5213                  (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adapter->pf);
5214         qpp = t4_read_reg(adapter, A_SGE_EGRESS_QUEUES_PER_PAGE_PF);
5215         sge_params->eq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0);
5216         qpp = t4_read_reg(adapter, A_SGE_INGRESS_QUEUES_PER_PAGE_PF);
5217         sge_params->iq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0);
5218
5219         return 0;
5220 }
5221
5222 /**
5223  * t4_init_tp_params - initialize adap->params.tp
5224  * @adap: the adapter
5225  *
5226  * Initialize various fields of the adapter's TP Parameters structure.
5227  */
5228 int t4_init_tp_params(struct adapter *adap)
5229 {
5230         int chan, ret;
5231         u32 param, v;
5232
5233         v = t4_read_reg(adap, A_TP_TIMER_RESOLUTION);
5234         adap->params.tp.tre = G_TIMERRESOLUTION(v);
5235         adap->params.tp.dack_re = G_DELAYEDACKRESOLUTION(v);
5236
5237         /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
5238         for (chan = 0; chan < NCHAN; chan++)
5239                 adap->params.tp.tx_modq[chan] = chan;
5240
5241         /*
5242          * Cache the adapter's Compressed Filter Mode/Mask and global Ingress
5243          * Configuration.
5244          */
5245         param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
5246                  V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) |
5247                  V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_MODE_MASK));
5248
5249         /* Read current value */
5250         ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
5251                               1, &param, &v);
5252         if (!ret) {
5253                 dev_info(adap, "Current filter mode/mask 0x%x:0x%x\n",
5254                          G_FW_PARAMS_PARAM_FILTER_MODE(v),
5255                          G_FW_PARAMS_PARAM_FILTER_MASK(v));
5256                 adap->params.tp.vlan_pri_map =
5257                         G_FW_PARAMS_PARAM_FILTER_MODE(v);
5258                 adap->params.tp.filter_mask =
5259                         G_FW_PARAMS_PARAM_FILTER_MASK(v);
5260         } else {
5261                 dev_info(adap,
5262                          "Failed to read filter mode/mask via fw api, using indirect-reg-read\n");
5263
5264                 /* In case of older-fw (which doesn't expose the api
5265                  * FW_PARAM_DEV_FILTER_MODE_MASK) and newer-driver (which uses
5266                  * the fw api) combination, fall-back to older method of reading
5267                  * the filter mode from indirect-register
5268                  */
5269                 t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
5270                                  &adap->params.tp.vlan_pri_map, 1,
5271                                  A_TP_VLAN_PRI_MAP);
5272
5273                 /* With the older-fw and newer-driver combination we might run
5274                  * into an issue when user wants to use hash filter region but
5275                  * the filter_mask is zero, in this case filter_mask validation
5276                  * is tough. To avoid that we set the filter_mask same as filter
5277                  * mode, which will behave exactly as the older way of ignoring
5278                  * the filter mask validation.
5279                  */
5280                 adap->params.tp.filter_mask = adap->params.tp.vlan_pri_map;
5281         }
5282
5283         t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
5284                          &adap->params.tp.ingress_config, 1,
5285                          A_TP_INGRESS_CONFIG);
5286
5287         /* For T6, cache the adapter's compressed error vector
5288          * and passing outer header info for encapsulated packets.
5289          */
5290         if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
5291                 v = t4_read_reg(adap, A_TP_OUT_CONFIG);
5292                 adap->params.tp.rx_pkt_encap = (v & F_CRXPKTENC) ? 1 : 0;
5293         }
5294
5295         /*
5296          * Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
5297          * shift positions of several elements of the Compressed Filter Tuple
5298          * for this adapter which we need frequently ...
5299          */
5300         adap->params.tp.vlan_shift = t4_filter_field_shift(adap, F_VLAN);
5301         adap->params.tp.vnic_shift = t4_filter_field_shift(adap, F_VNIC_ID);
5302         adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT);
5303         adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
5304                                                                F_PROTOCOL);
5305         adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
5306                                                                 F_ETHERTYPE);
5307         adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
5308                                                                F_MACMATCH);
5309         adap->params.tp.tos_shift = t4_filter_field_shift(adap, F_TOS);
5310
5311         v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
5312         adap->params.tp.hash_filter_mask = v;
5313         v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A);
5314         adap->params.tp.hash_filter_mask |= ((u64)v << 32);
5315
5316         return 0;
5317 }
5318
5319 /**
5320  * t4_filter_field_shift - calculate filter field shift
5321  * @adap: the adapter
5322  * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits)
5323  *
5324  * Return the shift position of a filter field within the Compressed
5325  * Filter Tuple.  The filter field is specified via its selection bit
5326  * within TP_VLAN_PRI_MAL (filter mode).  E.g. F_VLAN.
5327  */
5328 int t4_filter_field_shift(const struct adapter *adap, unsigned int filter_sel)
5329 {
5330         unsigned int filter_mode = adap->params.tp.vlan_pri_map;
5331         unsigned int sel;
5332         int field_shift;
5333
5334         if ((filter_mode & filter_sel) == 0)
5335                 return -1;
5336
5337         for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) {
5338                 switch (filter_mode & sel) {
5339                 case F_FCOE:
5340                         field_shift += W_FT_FCOE;
5341                         break;
5342                 case F_PORT:
5343                         field_shift += W_FT_PORT;
5344                         break;
5345                 case F_VNIC_ID:
5346                         field_shift += W_FT_VNIC_ID;
5347                         break;
5348                 case F_VLAN:
5349                         field_shift += W_FT_VLAN;
5350                         break;
5351                 case F_TOS:
5352                         field_shift += W_FT_TOS;
5353                         break;
5354                 case F_PROTOCOL:
5355                         field_shift += W_FT_PROTOCOL;
5356                         break;
5357                 case F_ETHERTYPE:
5358                         field_shift += W_FT_ETHERTYPE;
5359                         break;
5360                 case F_MACMATCH:
5361                         field_shift += W_FT_MACMATCH;
5362                         break;
5363                 case F_MPSHITTYPE:
5364                         field_shift += W_FT_MPSHITTYPE;
5365                         break;
5366                 case F_FRAGMENTATION:
5367                         field_shift += W_FT_FRAGMENTATION;
5368                         break;
5369                 }
5370         }
5371         return field_shift;
5372 }
5373
5374 int t4_init_rss_mode(struct adapter *adap, int mbox)
5375 {
5376         int i, ret;
5377         struct fw_rss_vi_config_cmd rvc;
5378
5379         memset(&rvc, 0, sizeof(rvc));
5380
5381         for_each_port(adap, i) {
5382                 struct port_info *p = adap2pinfo(adap, i);
5383
5384                 rvc.op_to_viid = htonl(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
5385                                        F_FW_CMD_REQUEST | F_FW_CMD_READ |
5386                                        V_FW_RSS_VI_CONFIG_CMD_VIID(p->viid));
5387                 rvc.retval_len16 = htonl(FW_LEN16(rvc));
5388                 ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
5389                 if (ret)
5390                         return ret;
5391                 p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen);
5392         }
5393         return 0;
5394 }
5395
5396 int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
5397 {
5398         unsigned int fw_caps = adap->params.fw_caps_support;
5399         fw_port_cap32_t pcaps, acaps;
5400         enum fw_port_type port_type;
5401         struct fw_port_cmd cmd;
5402         u8 vivld = 0, vin = 0;
5403         int ret, i, j = 0;
5404         int mdio_addr;
5405         u32 action;
5406         u8 addr[6];
5407
5408         memset(&cmd, 0, sizeof(cmd));
5409
5410         for_each_port(adap, i) {
5411                 struct port_info *pi = adap2pinfo(adap, i);
5412                 unsigned int rss_size = 0;
5413
5414                 while ((adap->params.portvec & (1 << j)) == 0)
5415                         j++;
5416
5417                 /* If we haven't yet determined whether we're talking to
5418                  * Firmware which knows the new 32-bit Port Capabilities, it's
5419                  * time to find out now.  This will also tell new Firmware to
5420                  * send us Port Status Updates using the new 32-bit Port
5421                  * Capabilities version of the Port Information message.
5422                  */
5423                 if (fw_caps == FW_CAPS_UNKNOWN) {
5424                         u32 param, val, caps;
5425
5426                         caps = FW_PARAMS_PARAM_PFVF_PORT_CAPS32;
5427                         param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) |
5428                                  V_FW_PARAMS_PARAM_X(caps));
5429                         val = 1;
5430                         ret = t4_set_params(adap, mbox, pf, vf, 1, &param,
5431                                             &val);
5432                         fw_caps = ret == 0 ? FW_CAPS32 : FW_CAPS16;
5433                         adap->params.fw_caps_support = fw_caps;
5434                 }
5435
5436                 memset(&cmd, 0, sizeof(cmd));
5437                 cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
5438                                                F_FW_CMD_REQUEST |
5439                                                F_FW_CMD_READ |
5440                                                V_FW_PORT_CMD_PORTID(j));
5441                 action = fw_caps == FW_CAPS16 ? FW_PORT_ACTION_GET_PORT_INFO :
5442                                                 FW_PORT_ACTION_GET_PORT_INFO32;
5443                 cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(action) |
5444                                                   FW_LEN16(cmd));
5445                 ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
5446                 if (ret)
5447                         return ret;
5448
5449                 /* Extract the various fields from the Port Information message.
5450                  */
5451                 if (fw_caps == FW_CAPS16) {
5452                         u32 lstatus =
5453                                 be32_to_cpu(cmd.u.info.lstatus_to_modtype);
5454
5455                         port_type = G_FW_PORT_CMD_PTYPE(lstatus);
5456                         mdio_addr = (lstatus & F_FW_PORT_CMD_MDIOCAP) ?
5457                                     (int)G_FW_PORT_CMD_MDIOADDR(lstatus) : -1;
5458                         pcaps = be16_to_cpu(cmd.u.info.pcap);
5459                         acaps = be16_to_cpu(cmd.u.info.acap);
5460                         pcaps = fwcaps16_to_caps32(pcaps);
5461                         acaps = fwcaps16_to_caps32(acaps);
5462                 } else {
5463                         u32 lstatus32 =
5464                                 be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
5465
5466                         port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
5467                         mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ?
5468                                     (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) :
5469                                     -1;
5470                         pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
5471                         acaps = be32_to_cpu(cmd.u.info32.acaps32);
5472                 }
5473
5474                 ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size,
5475                                   &vivld, &vin);
5476                 if (ret < 0)
5477                         return ret;
5478
5479                 pi->viid = ret;
5480                 pi->tx_chan = j;
5481                 pi->rss_size = rss_size;
5482                 t4_os_set_hw_addr(adap, i, addr);
5483
5484                 /* If fw supports returning the VIN as part of FW_VI_CMD,
5485                  * save the returned values.
5486                  */
5487                 if (adap->params.viid_smt_extn_support) {
5488                         pi->vivld = vivld;
5489                         pi->vin = vin;
5490                 } else {
5491                         /* Retrieve the values from VIID */
5492                         pi->vivld = G_FW_VIID_VIVLD(pi->viid);
5493                         pi->vin =  G_FW_VIID_VIN(pi->viid);
5494                 }
5495
5496                 pi->port_type = port_type;
5497                 pi->mdio_addr = mdio_addr;
5498                 pi->mod_type = FW_PORT_MOD_TYPE_NA;
5499
5500                 init_link_config(&pi->link_cfg, pcaps, acaps);
5501                 j++;
5502         }
5503         return 0;
5504 }
5505
5506 /**
5507  * t4_memory_rw_addr - read/write adapter memory via PCIE memory window
5508  * @adap: the adapter
5509  * @win: PCI-E Memory Window to use
5510  * @addr: address within adapter memory
5511  * @len: amount of memory to transfer
5512  * @hbuf: host memory buffer
5513  * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
5514  *
5515  * Reads/writes an [almost] arbitrary memory region in the firmware: the
5516  * firmware memory address and host buffer must be aligned on 32-bit
5517  * boudaries; the length may be arbitrary.
5518  *
5519  * NOTES:
5520  *  1. The memory is transferred as a raw byte sequence from/to the
5521  *     firmware's memory.  If this memory contains data structures which
5522  *     contain multi-byte integers, it's the caller's responsibility to
5523  *     perform appropriate byte order conversions.
5524  *
5525  *  2. It is the Caller's responsibility to ensure that no other code
5526  *     uses the specified PCI-E Memory Window while this routine is
5527  *     using it.  This is typically done via the use of OS-specific
5528  *     locks, etc.
5529  */
5530 int t4_memory_rw_addr(struct adapter *adap, int win, u32 addr,
5531                       u32 len, void *hbuf, int dir)
5532 {
5533         u32 pos, offset, resid;
5534         u32 win_pf, mem_reg, mem_aperture, mem_base;
5535         u32 *buf;
5536
5537         /* Argument sanity checks ...*/
5538         if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
5539                 return -EINVAL;
5540         buf = (u32 *)hbuf;
5541
5542         /* It's convenient to be able to handle lengths which aren't a
5543          * multiple of 32-bits because we often end up transferring files to
5544          * the firmware.  So we'll handle that by normalizing the length here
5545          * and then handling any residual transfer at the end.
5546          */
5547         resid = len & 0x3;
5548         len -= resid;
5549
5550         /* Each PCI-E Memory Window is programmed with a window size -- or
5551          * "aperture" -- which controls the granularity of its mapping onto
5552          * adapter memory.  We need to grab that aperture in order to know
5553          * how to use the specified window.  The window is also programmed
5554          * with the base address of the Memory Window in BAR0's address
5555          * space.  For T4 this is an absolute PCI-E Bus Address.  For T5
5556          * the address is relative to BAR0.
5557          */
5558         mem_reg = t4_read_reg(adap,
5559                               PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
5560                                                   win));
5561         mem_aperture = 1 << (G_WINDOW(mem_reg) + X_WINDOW_SHIFT);
5562         mem_base = G_PCIEOFST(mem_reg) << X_PCIEOFST_SHIFT;
5563
5564         win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->pf);
5565
5566         /* Calculate our initial PCI-E Memory Window Position and Offset into
5567          * that Window.
5568          */
5569         pos = addr & ~(mem_aperture - 1);
5570         offset = addr - pos;
5571
5572         /* Set up initial PCI-E Memory Window to cover the start of our
5573          * transfer.  (Read it back to ensure that changes propagate before we
5574          * attempt to use the new value.)
5575          */
5576         t4_write_reg(adap,
5577                      PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win),
5578                      pos | win_pf);
5579         t4_read_reg(adap,
5580                     PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win));
5581
5582         /* Transfer data to/from the adapter as long as there's an integral
5583          * number of 32-bit transfers to complete.
5584          *
5585          * A note on Endianness issues:
5586          *
5587          * The "register" reads and writes below from/to the PCI-E Memory
5588          * Window invoke the standard adapter Big-Endian to PCI-E Link
5589          * Little-Endian "swizzel."  As a result, if we have the following
5590          * data in adapter memory:
5591          *
5592          *     Memory:  ... | b0 | b1 | b2 | b3 | ...
5593          *     Address:      i+0  i+1  i+2  i+3
5594          *
5595          * Then a read of the adapter memory via the PCI-E Memory Window
5596          * will yield:
5597          *
5598          *     x = readl(i)
5599          *         31                  0
5600          *         [ b3 | b2 | b1 | b0 ]
5601          *
5602          * If this value is stored into local memory on a Little-Endian system
5603          * it will show up correctly in local memory as:
5604          *
5605          *     ( ..., b0, b1, b2, b3, ... )
5606          *
5607          * But on a Big-Endian system, the store will show up in memory
5608          * incorrectly swizzled as:
5609          *
5610          *     ( ..., b3, b2, b1, b0, ... )
5611          *
5612          * So we need to account for this in the reads and writes to the
5613          * PCI-E Memory Window below by undoing the register read/write
5614          * swizzels.
5615          */
5616         while (len > 0) {
5617                 if (dir == T4_MEMORY_READ)
5618                         *buf++ = le32_to_cpu((__le32)t4_read_reg(adap,
5619                                                                  mem_base +
5620                                                                  offset));
5621                 else
5622                         t4_write_reg(adap, mem_base + offset,
5623                                      (u32)cpu_to_le32(*buf++));
5624                 offset += sizeof(__be32);
5625                 len -= sizeof(__be32);
5626
5627                 /* If we've reached the end of our current window aperture,
5628                  * move the PCI-E Memory Window on to the next.  Note that
5629                  * doing this here after "len" may be 0 allows us to set up
5630                  * the PCI-E Memory Window for a possible final residual
5631                  * transfer below ...
5632                  */
5633                 if (offset == mem_aperture) {
5634                         pos += mem_aperture;
5635                         offset = 0;
5636                         t4_write_reg(adap,
5637                                 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
5638                                                     win), pos | win_pf);
5639                         t4_read_reg(adap,
5640                                 PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
5641                                                     win));
5642                 }
5643         }
5644
5645         /* If the original transfer had a length which wasn't a multiple of
5646          * 32-bits, now's where we need to finish off the transfer of the
5647          * residual amount.  The PCI-E Memory Window has already been moved
5648          * above (if necessary) to cover this final transfer.
5649          */
5650         if (resid) {
5651                 union {
5652                         u32 word;
5653                         char byte[4];
5654                 } last;
5655                 unsigned char *bp;
5656                 int i;
5657
5658                 if (dir == T4_MEMORY_READ) {
5659                         last.word = le32_to_cpu((__le32)t4_read_reg(adap,
5660                                                                     mem_base +
5661                                                                     offset));
5662                         for (bp = (unsigned char *)buf, i = resid; i < 4; i++)
5663                                 bp[i] = last.byte[i];
5664                 } else {
5665                         last.word = *buf;
5666                         for (i = resid; i < 4; i++)
5667                                 last.byte[i] = 0;
5668                         t4_write_reg(adap, mem_base + offset,
5669                                      (u32)cpu_to_le32(last.word));
5670                 }
5671         }
5672
5673         return 0;
5674 }
5675
5676 /**
5677  * t4_memory_rw_mtype -read/write EDC 0, EDC 1 or MC via PCIE memory window
5678  * @adap: the adapter
5679  * @win: PCI-E Memory Window to use
5680  * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
5681  * @maddr: address within indicated memory type
5682  * @len: amount of memory to transfer
5683  * @hbuf: host memory buffer
5684  * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
5685  *
5686  * Reads/writes adapter memory using t4_memory_rw_addr().  This routine
5687  * provides an (memory type, address within memory type) interface.
5688  */
5689 int t4_memory_rw_mtype(struct adapter *adap, int win, int mtype, u32 maddr,
5690                        u32 len, void *hbuf, int dir)
5691 {
5692         u32 mtype_offset;
5693         u32 edc_size, mc_size;
5694
5695         /* Offset into the region of memory which is being accessed
5696          * MEM_EDC0 = 0
5697          * MEM_EDC1 = 1
5698          * MEM_MC   = 2 -- MEM_MC for chips with only 1 memory controller
5699          * MEM_MC1  = 3 -- for chips with 2 memory controllers (e.g. T5)
5700          */
5701         edc_size  = G_EDRAM0_SIZE(t4_read_reg(adap, A_MA_EDRAM0_BAR));
5702         if (mtype != MEM_MC1) {
5703                 mtype_offset = (mtype * (edc_size * 1024 * 1024));
5704         } else {
5705                 mc_size = G_EXT_MEM0_SIZE(t4_read_reg(adap,
5706                                                       A_MA_EXT_MEMORY0_BAR));
5707                 mtype_offset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
5708         }
5709
5710         return t4_memory_rw_addr(adap, win,
5711                                  mtype_offset + maddr, len,
5712                                  hbuf, dir);
5713 }