remove unnecessary null checks

[dpdk.git] / drivers / net / cxgbe / cxgbe_main.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2014-2018 Chelsio Communications.
 * All rights reserved.
 */

#include <sys/queue.h>
#include <stdio.h>
#include <errno.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <stdarg.h>
#include <inttypes.h>
#include <netinet/in.h>

#include <rte_byteorder.h>
#include <rte_common.h>
#include <rte_cycles.h>
#include <rte_interrupts.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_pci.h>
#include <rte_branch_prediction.h>
#include <rte_memory.h>
#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_ether.h>
#include <ethdev_driver.h>
#include <ethdev_pci.h>
#include <rte_random.h>
#include <rte_dev.h>
#include <rte_kvargs.h>

#include "base/common.h"
#include "base/t4_regs.h"
#include "base/t4_msg.h"
#include "cxgbe.h"
#include "cxgbe_pfvf.h"
#include "clip_tbl.h"
#include "l2t.h"
#include "smt.h"
#include "mps_tcam.h"

static const u16 cxgbe_filter_mode_features[] = {
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE |
         F_PROTOCOL | F_PORT),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE |
         F_PROTOCOL | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE | F_TOS |
         F_PORT),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE | F_TOS |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_PROTOCOL | F_TOS |
         F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_PROTOCOL | F_VLAN |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_PROTOCOL | F_VNIC_ID |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_TOS | F_VLAN |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_TOS | F_VNIC_ID |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_VLAN | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_MACMATCH | F_VNIC_ID | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_ETHERTYPE | F_PROTOCOL | F_TOS |
         F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_ETHERTYPE | F_VLAN | F_PORT),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_ETHERTYPE | F_VLAN | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_ETHERTYPE | F_VNIC_ID | F_PORT),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_ETHERTYPE | F_VNIC_ID | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_PROTOCOL | F_TOS | F_VLAN | F_PORT),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_PROTOCOL | F_TOS | F_VLAN | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_PROTOCOL | F_TOS | F_VNIC_ID |
         F_PORT),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_PROTOCOL | F_TOS | F_VNIC_ID |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_PROTOCOL | F_VLAN | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_PROTOCOL | F_VNIC_ID | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_TOS | F_VLAN | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_TOS | F_VNIC_ID | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MPSHITTYPE | F_VLAN | F_VNIC_ID | F_FCOE),
        (F_FRAGMENTATION | F_MACMATCH | F_ETHERTYPE | F_PROTOCOL | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MACMATCH | F_ETHERTYPE | F_TOS | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MACMATCH | F_PROTOCOL | F_VLAN | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MACMATCH | F_PROTOCOL | F_VNIC_ID | F_PORT |
         F_FCOE),
        (F_FRAGMENTATION | F_MACMATCH | F_TOS | F_VLAN | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_MACMATCH | F_TOS | F_VNIC_ID | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_ETHERTYPE | F_VLAN | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_ETHERTYPE | F_VNIC_ID | F_PORT | F_FCOE),
        (F_FRAGMENTATION | F_PROTOCOL | F_TOS | F_VLAN | F_FCOE),
        (F_FRAGMENTATION | F_PROTOCOL | F_TOS | F_VNIC_ID | F_FCOE),
        (F_FRAGMENTATION | F_VLAN | F_VNIC_ID | F_PORT | F_FCOE),
        (F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE | F_PROTOCOL | F_PORT |
         F_FCOE),
        (F_MPSHITTYPE | F_MACMATCH | F_ETHERTYPE | F_TOS | F_PORT | F_FCOE),
        (F_MPSHITTYPE | F_MACMATCH | F_PROTOCOL | F_VLAN | F_PORT),
        (F_MPSHITTYPE | F_MACMATCH | F_PROTOCOL | F_VNIC_ID | F_PORT),
        (F_MPSHITTYPE | F_MACMATCH | F_TOS | F_VLAN | F_PORT),
        (F_MPSHITTYPE | F_MACMATCH | F_TOS | F_VNIC_ID | F_PORT),
        (F_MPSHITTYPE | F_ETHERTYPE | F_VLAN | F_PORT | F_FCOE),
        (F_MPSHITTYPE | F_ETHERTYPE | F_VNIC_ID | F_PORT | F_FCOE),
        (F_MPSHITTYPE | F_PROTOCOL | F_TOS | F_VLAN | F_PORT | F_FCOE),
        (F_MPSHITTYPE | F_PROTOCOL | F_TOS | F_VNIC_ID | F_PORT | F_FCOE),
        (F_MPSHITTYPE | F_VLAN | F_VNIC_ID | F_PORT),
};

/**
 * Allocate a chunk of memory. The allocated memory is cleared.
 */
void *t4_alloc_mem(size_t size)
{
        return rte_zmalloc(NULL, size, 0);
}

/**
 * Free memory allocated through t4_alloc_mem().
 */
void t4_free_mem(void *addr)
{
        rte_free(addr);
}

/*
 * Response queue handler for the FW event queue.
 */
static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
                          __rte_unused const struct pkt_gl *gl)
{
        u8 opcode = ((const struct rss_header *)rsp)->opcode;

        rsp++;                                          /* skip RSS header */

        /*
         * FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
         */
        if (unlikely(opcode == CPL_FW4_MSG &&
                     ((const struct cpl_fw4_msg *)rsp)->type ==
                      FW_TYPE_RSSCPL)) {
                rsp++;
                opcode = ((const struct rss_header *)rsp)->opcode;
                rsp++;
                if (opcode != CPL_SGE_EGR_UPDATE) {
                        dev_err(q->adapter, "unexpected FW4/CPL %#x on FW event queue\n",
                                opcode);
                        goto out;
                }
        }

        if (likely(opcode == CPL_SGE_EGR_UPDATE)) {
                /* do nothing */
        } else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) {
                const struct cpl_fw6_msg *msg = (const void *)rsp;

                t4_handle_fw_rpl(q->adapter, msg->data);
        } else if (opcode == CPL_ABORT_RPL_RSS) {
                const struct cpl_abort_rpl_rss *p = (const void *)rsp;

                cxgbe_hash_del_filter_rpl(q->adapter, p);
        } else if (opcode == CPL_SET_TCB_RPL) {
                const struct cpl_set_tcb_rpl *p = (const void *)rsp;

                cxgbe_filter_rpl(q->adapter, p);
        } else if (opcode == CPL_ACT_OPEN_RPL) {
                const struct cpl_act_open_rpl *p = (const void *)rsp;

                cxgbe_hash_filter_rpl(q->adapter, p);
        } else if (opcode == CPL_L2T_WRITE_RPL) {
                const struct cpl_l2t_write_rpl *p = (const void *)rsp;

                cxgbe_do_l2t_write_rpl(q->adapter, p);
        } else if (opcode == CPL_SMT_WRITE_RPL) {
                const struct cpl_smt_write_rpl *p = (const void *)rsp;

                cxgbe_do_smt_write_rpl(q->adapter, p);
        } else {
                dev_err(adapter, "unexpected CPL %#x on FW event queue\n",
                        opcode);
        }
out:
        return 0;
}

/**
 * Setup sge control queues to pass control information.
 */
int cxgbe_setup_sge_ctrl_txq(struct adapter *adapter)
{
        struct sge *s = &adapter->sge;
        int err = 0, i = 0;

        for_each_port(adapter, i) {
                struct port_info *pi = adap2pinfo(adapter, i);
                char name[RTE_ETH_NAME_MAX_LEN];
                struct sge_ctrl_txq *q = &s->ctrlq[i];

                q->q.size = 1024;
                err = t4_sge_alloc_ctrl_txq(adapter, q,
                                            adapter->eth_dev,  i,
                                            s->fw_evtq.cntxt_id,
                                            rte_socket_id());
                if (err) {
                        dev_err(adapter, "Failed to alloc ctrl txq. Err: %d",
                                err);
                        goto out;
                }
                snprintf(name, sizeof(name), "%s_ctrl_pool_%d",
                         pi->eth_dev->device->driver->name,
                         pi->eth_dev->data->port_id);
                q->mb_pool = rte_pktmbuf_pool_create(name, s->ctrlq[i].q.size,
                                                     RTE_CACHE_LINE_SIZE,
                                                     RTE_MBUF_PRIV_ALIGN,
                                                     RTE_MBUF_DEFAULT_BUF_SIZE,
                                                     SOCKET_ID_ANY);
                if (!q->mb_pool) {
                        err = -rte_errno;
                        dev_err(adapter,
                                "Can't create ctrl pool for port %d. Err: %d\n",
                                pi->eth_dev->data->port_id, err);
                        goto out;
                }
        }
        return 0;
out:
        t4_free_sge_resources(adapter);
        return err;
}

/**
 * cxgbe_poll_for_completion: Poll rxq for completion
 * @q: rxq to poll
 * @ms: milliseconds to delay
 * @cnt: number of times to poll
 * @c: completion to check for 'done' status
 *
 * Polls the rxq for reples until completion is done or the count
 * expires.
 */
int cxgbe_poll_for_completion(struct sge_rspq *q, unsigned int ms,
                              unsigned int cnt, struct t4_completion *c)
{
        unsigned int i;
        unsigned int work_done, budget = 32;

        if (!c)
                return -EINVAL;

        for (i = 0; i < cnt; i++) {
                cxgbe_poll(q, NULL, budget, &work_done);
                t4_os_lock(&c->lock);
                if (c->done) {
                        t4_os_unlock(&c->lock);
                        return 0;
                }
                t4_os_unlock(&c->lock);
                rte_delay_ms(ms);
        }
        return -ETIMEDOUT;
}

int cxgbe_setup_sge_fwevtq(struct adapter *adapter)
{
        struct sge *s = &adapter->sge;
        int err = 0;
        int msi_idx = 0;

        err = t4_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->eth_dev,
                               msi_idx, NULL, fwevtq_handler, -1, NULL, 0,
                               rte_socket_id());
        return err;
}

static int closest_timer(const struct sge *s, int time)
{
        unsigned int i, match = 0;
        int delta, min_delta = INT_MAX;

        for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
                delta = time - s->timer_val[i];
                if (delta < 0)
                        delta = -delta;
                if (delta < min_delta) {
                        min_delta = delta;
                        match = i;
                }
        }
        return match;
}

static int closest_thres(const struct sge *s, int thres)
{
        unsigned int i, match = 0;
        int delta, min_delta = INT_MAX;

        for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
                delta = thres - s->counter_val[i];
                if (delta < 0)
                        delta = -delta;
                if (delta < min_delta) {
                        min_delta = delta;
                        match = i;
                }
        }
        return match;
}

/**
 * cxgb4_set_rspq_intr_params - set a queue's interrupt holdoff parameters
 * @q: the Rx queue
 * @us: the hold-off time in us, or 0 to disable timer
 * @cnt: the hold-off packet count, or 0 to disable counter
 *
 * Sets an Rx queue's interrupt hold-off time and packet count.  At least
 * one of the two needs to be enabled for the queue to generate interrupts.
 */
int cxgb4_set_rspq_intr_params(struct sge_rspq *q, unsigned int us,
                               unsigned int cnt)
{
        struct adapter *adap = q->adapter;
        unsigned int timer_val;

        if (cnt) {
                int err;
                u32 v, new_idx;

                new_idx = closest_thres(&adap->sge, cnt);
                if (q->desc && q->pktcnt_idx != new_idx) {
                        /* the queue has already been created, update it */
                        v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
                            V_FW_PARAMS_PARAM_X(
                            FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
                            V_FW_PARAMS_PARAM_YZ(q->cntxt_id);
                        err = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
                                            &v, &new_idx);
                        if (err)
                                return err;
                }
                q->pktcnt_idx = new_idx;
        }

        timer_val = (us == 0) ? X_TIMERREG_RESTART_COUNTER :
                                closest_timer(&adap->sge, us);

        if ((us | cnt) == 0)
                q->intr_params = V_QINTR_TIMER_IDX(X_TIMERREG_UPDATE_CIDX);
        else
                q->intr_params = V_QINTR_TIMER_IDX(timer_val) |
                                 V_QINTR_CNT_EN(cnt > 0);
        return 0;
}

/**
 * Allocate an active-open TID and set it to the supplied value.
 */
int cxgbe_alloc_atid(struct tid_info *t, void *data)
{
        int atid = -1;

        t4_os_lock(&t->atid_lock);
        if (t->afree) {
                union aopen_entry *p = t->afree;

                atid = p - t->atid_tab;
                t->afree = p->next;
                p->data = data;
                t->atids_in_use++;
        }
        t4_os_unlock(&t->atid_lock);
        return atid;
}

/**
 * Release an active-open TID.
 */
void cxgbe_free_atid(struct tid_info *t, unsigned int atid)
{
        union aopen_entry *p = &t->atid_tab[atid];

        t4_os_lock(&t->atid_lock);
        p->next = t->afree;
        t->afree = p;
        t->atids_in_use--;
        t4_os_unlock(&t->atid_lock);
}

/**
 * Populate a TID_RELEASE WR.  Caller must properly size the skb.
 */
static void mk_tid_release(struct rte_mbuf *mbuf, unsigned int tid)
{
        struct cpl_tid_release *req;

        req = rte_pktmbuf_mtod(mbuf, struct cpl_tid_release *);
        INIT_TP_WR_MIT_CPL(req, CPL_TID_RELEASE, tid);
}

/**
 * Release a TID and inform HW.  If we are unable to allocate the release
 * message we defer to a work queue.
 */
void cxgbe_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid,
                      unsigned short family)
{
        struct rte_mbuf *mbuf;
        struct adapter *adap = container_of(t, struct adapter, tids);

        WARN_ON(tid >= t->ntids);

        if (t->tid_tab[tid]) {
                t->tid_tab[tid] = NULL;
                __atomic_sub_fetch(&t->conns_in_use, 1, __ATOMIC_RELAXED);
                if (t->hash_base && tid >= t->hash_base) {
                        if (family == FILTER_TYPE_IPV4)
                                __atomic_sub_fetch(&t->hash_tids_in_use, 1,
                                                   __ATOMIC_RELAXED);
                } else {
                        if (family == FILTER_TYPE_IPV4)
                                __atomic_sub_fetch(&t->tids_in_use, 1,
                                                   __ATOMIC_RELAXED);
                }
        }

        mbuf = rte_pktmbuf_alloc((&adap->sge.ctrlq[chan])->mb_pool);
        if (mbuf) {
                mbuf->data_len = sizeof(struct cpl_tid_release);
                mbuf->pkt_len = mbuf->data_len;
                mk_tid_release(mbuf, tid);
                t4_mgmt_tx(&adap->sge.ctrlq[chan], mbuf);
        }
}

/**
 * Insert a TID.
 */
void cxgbe_insert_tid(struct tid_info *t, void *data, unsigned int tid,
                      unsigned short family)
{
        t->tid_tab[tid] = data;
        if (t->hash_base && tid >= t->hash_base) {
                if (family == FILTER_TYPE_IPV4)
                        __atomic_add_fetch(&t->hash_tids_in_use, 1,
                                           __ATOMIC_RELAXED);
        } else {
                if (family == FILTER_TYPE_IPV4)
                        __atomic_add_fetch(&t->tids_in_use, 1,
                                           __ATOMIC_RELAXED);
        }

        __atomic_add_fetch(&t->conns_in_use, 1, __ATOMIC_RELAXED);
}

/**
 * Free TID tables.
 */
static void tid_free(struct tid_info *t)
{
        if (t->tid_tab) {
                rte_bitmap_free(t->ftid_bmap);

                if (t->ftid_bmap_array)
                        t4_os_free(t->ftid_bmap_array);

                t4_os_free(t->tid_tab);
        }

        memset(t, 0, sizeof(struct tid_info));
}

/**
 * Allocate and initialize the TID tables.  Returns 0 on success.
 */
static int tid_init(struct tid_info *t)
{
        size_t size;
        unsigned int ftid_bmap_size;
        unsigned int natids = t->natids;
        unsigned int max_ftids = t->nftids;

        ftid_bmap_size = rte_bitmap_get_memory_footprint(t->nftids);
        size = t->ntids * sizeof(*t->tid_tab) +
                max_ftids * sizeof(*t->ftid_tab) +
                natids * sizeof(*t->atid_tab);

        t->tid_tab = t4_os_alloc(size);
        if (!t->tid_tab)
                return -ENOMEM;

        t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids];
        t->ftid_tab = (struct filter_entry *)&t->atid_tab[t->natids];
        t->ftid_bmap_array = t4_os_alloc(ftid_bmap_size);
        if (!t->ftid_bmap_array) {
                tid_free(t);
                return -ENOMEM;
        }

        t4_os_lock_init(&t->atid_lock);
        t4_os_lock_init(&t->ftid_lock);

        t->afree = NULL;
        t->atids_in_use = 0;
        t->tids_in_use = 0;
        t->conns_in_use = 0;

        /* Setup the free list for atid_tab and clear the stid bitmap. */
        if (natids) {
                while (--natids)
                        t->atid_tab[natids - 1].next = &t->atid_tab[natids];
                t->afree = t->atid_tab;
        }

        t->ftid_bmap = rte_bitmap_init(t->nftids, t->ftid_bmap_array,
                                       ftid_bmap_size);
        if (!t->ftid_bmap) {
                tid_free(t);
                return -ENOMEM;
        }

        return 0;
}

static inline void init_rspq(struct adapter *adap, struct sge_rspq *q,
                      unsigned int us, unsigned int cnt,
                      unsigned int size, unsigned int iqe_size)
{
        q->adapter = adap;
        cxgb4_set_rspq_intr_params(q, us, cnt);
        q->iqe_len = iqe_size;
        q->size = size;
}

int cxgbe_cfg_queue_count(struct rte_eth_dev *eth_dev)
{
        struct port_info *temp_pi, *pi = eth_dev->data->dev_private;
        struct adapter *adap = pi->adapter;
        u16 first_txq = 0, first_rxq = 0;
        struct sge *s = &adap->sge;
        u16 i, max_rxqs, max_txqs;

        max_rxqs = s->max_ethqsets;
        max_txqs = s->max_ethqsets;
        for_each_port(adap, i) {
                temp_pi = adap2pinfo(adap, i);
                if (i == pi->port_id)
                        break;

                if (max_rxqs <= temp_pi->n_rx_qsets ||
                    max_txqs <= temp_pi->n_tx_qsets)
                        return -ENOMEM;

                first_rxq += temp_pi->n_rx_qsets;
                first_txq += temp_pi->n_tx_qsets;
                max_rxqs -= temp_pi->n_rx_qsets;
                max_txqs -= temp_pi->n_tx_qsets;
        }

        if ((eth_dev->data->nb_rx_queues < 1) ||
            (eth_dev->data->nb_tx_queues < 1))
                return -EINVAL;

        if (eth_dev->data->nb_rx_queues > max_rxqs ||
            eth_dev->data->nb_tx_queues > max_txqs)
                return -EINVAL;

        /* We must configure RSS, since config has changed*/
        pi->flags &= ~PORT_RSS_DONE;

        pi->n_rx_qsets = eth_dev->data->nb_rx_queues;
        pi->n_tx_qsets = eth_dev->data->nb_tx_queues;
        pi->first_rxqset = first_rxq;
        pi->first_txqset = first_txq;

        return 0;
}

void cxgbe_cfg_queues_free(struct adapter *adap)
{
        if (adap->sge.ethtxq) {
                rte_free(adap->sge.ethtxq);
                adap->sge.ethtxq = NULL;
        }

        if (adap->sge.ethrxq) {
                rte_free(adap->sge.ethrxq);
                adap->sge.ethrxq = NULL;
        }

        adap->flags &= ~CFG_QUEUES;
}

int cxgbe_cfg_queues(struct rte_eth_dev *eth_dev)
{
        struct port_info *pi = eth_dev->data->dev_private;
        struct adapter *adap = pi->adapter;
        struct sge *s = &adap->sge;
        u16 i;

        if (!(adap->flags & CFG_QUEUES)) {
                s->ethrxq = rte_calloc_socket(NULL, s->max_ethqsets,
                                              sizeof(struct sge_eth_rxq), 0,
                                              rte_socket_id());
                if (!s->ethrxq)
                        return -ENOMEM;

                s->ethtxq = rte_calloc_socket(NULL, s->max_ethqsets,
                                              sizeof(struct sge_eth_txq), 0,
                                              rte_socket_id());
                if (!s->ethtxq) {
                        rte_free(s->ethrxq);
                        s->ethrxq = NULL;
                        return -ENOMEM;
                }

                for (i = 0; i < s->max_ethqsets; i++) {
                        struct sge_eth_rxq *r = &s->ethrxq[i];
                        struct sge_eth_txq *t = &s->ethtxq[i];

                        init_rspq(adap, &r->rspq, 5, 32, 1024, 64);
                        r->usembufs = 1;
                        r->fl.size = (r->usembufs ? 1024 : 72);

                        t->q.size = 1024;
                }

                init_rspq(adap, &adap->sge.fw_evtq, 0, 0, 1024, 64);
                adap->flags |= CFG_QUEUES;
        }

        return 0;
}

void cxgbe_stats_get(struct port_info *pi, struct port_stats *stats)
{
        t4_get_port_stats_offset(pi->adapter, pi->tx_chan, stats,
                                 &pi->stats_base);
}

void cxgbe_stats_reset(struct port_info *pi)
{
        t4_clr_port_stats(pi->adapter, pi->tx_chan);
}

static void setup_memwin(struct adapter *adap)
{
        u32 mem_win0_base;

        /* For T5, only relative offset inside the PCIe BAR is passed */
        mem_win0_base = MEMWIN0_BASE;

        /*
         * Set up memory window for accessing adapter memory ranges.  (Read
         * back MA register to ensure that changes propagate before we attempt
         * to use the new values.)
         */
        t4_write_reg(adap,
                     PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
                                         MEMWIN_NIC),
                     mem_win0_base | V_BIR(0) |
                     V_WINDOW(ilog2(MEMWIN0_APERTURE) - X_WINDOW_SHIFT));
        t4_read_reg(adap,
                    PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
                                        MEMWIN_NIC));
}

int cxgbe_init_rss(struct adapter *adap)
{
        unsigned int i;

        if (is_pf4(adap)) {
                int err;

                err = t4_init_rss_mode(adap, adap->mbox);
                if (err)
                        return err;
        }

        for_each_port(adap, i) {
                struct port_info *pi = adap2pinfo(adap, i);

                pi->rss = rte_zmalloc(NULL, pi->rss_size * sizeof(u16), 0);
                if (!pi->rss)
                        return -ENOMEM;

                pi->rss_hf = CXGBE_RSS_HF_ALL;
        }
        return 0;
}

/**
 * Dump basic information about the adapter.
 */
void cxgbe_print_adapter_info(struct adapter *adap)
{
        /**
         * Hardware/Firmware/etc. Version/Revision IDs.
         */
        t4_dump_version_info(adap);
}

void cxgbe_print_port_info(struct adapter *adap)
{
        int i;
        char buf[80];
        struct rte_pci_addr *loc = &adap->pdev->addr;

        for_each_port(adap, i) {
                const struct port_info *pi = adap2pinfo(adap, i);
                char *bufp = buf;

                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_100M)
                        bufp += sprintf(bufp, "100M/");
                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_1G)
                        bufp += sprintf(bufp, "1G/");
                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_10G)
                        bufp += sprintf(bufp, "10G/");
                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_25G)
                        bufp += sprintf(bufp, "25G/");
                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_40G)
                        bufp += sprintf(bufp, "40G/");
                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_50G)
                        bufp += sprintf(bufp, "50G/");
                if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_100G)
                        bufp += sprintf(bufp, "100G/");
                if (bufp != buf)
                        --bufp;
                sprintf(bufp, "BASE-%s",
                        t4_get_port_type_description(
                                (enum fw_port_type)pi->link_cfg.port_type));

                dev_info(adap,
                         " " PCI_PRI_FMT " Chelsio rev %d %s %s\n",
                         loc->domain, loc->bus, loc->devid, loc->function,
                         CHELSIO_CHIP_RELEASE(adap->params.chip), buf,
                         (adap->flags & USING_MSIX) ? " MSI-X" :
                         (adap->flags & USING_MSI) ? " MSI" : "");
        }
}

static int check_devargs_handler(const char *key, const char *value, void *p)
{
        if (!strncmp(key, CXGBE_DEVARG_CMN_KEEP_OVLAN, strlen(key)) ||
            !strncmp(key, CXGBE_DEVARG_CMN_TX_MODE_LATENCY, strlen(key)) ||
            !strncmp(key, CXGBE_DEVARG_VF_FORCE_LINK_UP, strlen(key))) {
                if (!strncmp(value, "1", 1)) {
                        bool *dst_val = (bool *)p;

                        *dst_val = true;
                }
        }

        if (!strncmp(key, CXGBE_DEVARG_PF_FILTER_MODE, strlen(key)) ||
            !strncmp(key, CXGBE_DEVARG_PF_FILTER_MASK, strlen(key))) {
                u32 *dst_val = (u32 *)p;
                char *endptr = NULL;
                u32 arg_val;

                arg_val = strtoul(value, &endptr, 16);
                if (errno || endptr == value)
                        return -EINVAL;

                *dst_val = arg_val;
        }

        return 0;
}

static int cxgbe_get_devargs(struct rte_devargs *devargs, const char *key,
                             void *p)
{
        struct rte_kvargs *kvlist;
        int ret = 0;

        if (!devargs)
                return 0;

        kvlist = rte_kvargs_parse(devargs->args, NULL);
        if (!kvlist)
                return 0;

        if (!rte_kvargs_count(kvlist, key))
                goto out;

        ret = rte_kvargs_process(kvlist, key, check_devargs_handler, p);

out:
        rte_kvargs_free(kvlist);

        return ret;
}

static void cxgbe_get_devargs_int(struct adapter *adap, bool *dst,
                                  const char *key, bool default_value)
{
        struct rte_pci_device *pdev = adap->pdev;
        int ret;
        bool devarg_value = default_value;

        *dst = default_value;
        if (!pdev)
                return;

        ret = cxgbe_get_devargs(pdev->device.devargs, key, &devarg_value);
        if (ret)
                return;

        *dst = devarg_value;
}

static void cxgbe_get_devargs_u32(struct adapter *adap, u32 *dst,
                                  const char *key, u32 default_value)
{
        struct rte_pci_device *pdev = adap->pdev;
        u32 devarg_value = default_value;
        int ret;

        *dst = default_value;
        if (!pdev)
                return;

        ret = cxgbe_get_devargs(pdev->device.devargs, key, &devarg_value);
        if (ret)
                return;

        *dst = devarg_value;
}

void cxgbe_process_devargs(struct adapter *adap)
{
        cxgbe_get_devargs_int(adap, &adap->devargs.keep_ovlan,
                              CXGBE_DEVARG_CMN_KEEP_OVLAN, false);
        cxgbe_get_devargs_int(adap, &adap->devargs.tx_mode_latency,
                              CXGBE_DEVARG_CMN_TX_MODE_LATENCY, false);
        cxgbe_get_devargs_int(adap, &adap->devargs.force_link_up,
                              CXGBE_DEVARG_VF_FORCE_LINK_UP, false);
        cxgbe_get_devargs_u32(adap, &adap->devargs.filtermode,
                              CXGBE_DEVARG_PF_FILTER_MODE, 0);
        cxgbe_get_devargs_u32(adap, &adap->devargs.filtermask,
                              CXGBE_DEVARG_PF_FILTER_MASK, 0);
}

static void configure_vlan_types(struct adapter *adapter)
{
        int i;

        for_each_port(adapter, i) {
                /* OVLAN Type 0x88a8 */
                t4_set_reg_field(adapter, MPS_PORT_RX_OVLAN_REG(i, A_RX_OVLAN0),
                                 V_OVLAN_MASK(M_OVLAN_MASK) |
                                 V_OVLAN_ETYPE(M_OVLAN_ETYPE),
                                 V_OVLAN_MASK(M_OVLAN_MASK) |
                                 V_OVLAN_ETYPE(0x88a8));
                /* OVLAN Type 0x9100 */
                t4_set_reg_field(adapter, MPS_PORT_RX_OVLAN_REG(i, A_RX_OVLAN1),
                                 V_OVLAN_MASK(M_OVLAN_MASK) |
                                 V_OVLAN_ETYPE(M_OVLAN_ETYPE),
                                 V_OVLAN_MASK(M_OVLAN_MASK) |
                                 V_OVLAN_ETYPE(0x9100));

                /* IVLAN 0X8100 */
                t4_set_reg_field(adapter, MPS_PORT_RX_IVLAN(i),
                                 V_IVLAN_ETYPE(M_IVLAN_ETYPE),
                                 V_IVLAN_ETYPE(0x8100));

                t4_set_reg_field(adapter, MPS_PORT_RX_CTL(i),
                                 F_OVLAN_EN0 | F_OVLAN_EN1 |
                                 F_IVLAN_EN,
                                 F_OVLAN_EN0 | F_OVLAN_EN1 |
                                 F_IVLAN_EN);
        }

        t4_tp_wr_bits_indirect(adapter, A_TP_INGRESS_CONFIG, V_RM_OVLAN(1),
                               V_RM_OVLAN(!adapter->devargs.keep_ovlan));
}

static int cxgbe_get_filter_vnic_mode_from_devargs(u32 val)
{
        u32 vnic_mode;

        vnic_mode = val & (CXGBE_DEVARGS_FILTER_MODE_PF_VF |
                           CXGBE_DEVARGS_FILTER_MODE_VLAN_OUTER);
        if (vnic_mode) {
                switch (vnic_mode) {
                case CXGBE_DEVARGS_FILTER_MODE_VLAN_OUTER:
                        return CXGBE_FILTER_VNIC_MODE_OVLAN;
                case CXGBE_DEVARGS_FILTER_MODE_PF_VF:
                        return CXGBE_FILTER_VNIC_MODE_PFVF;
                default:
                        return -EINVAL;
                }
        }

        return CXGBE_FILTER_VNIC_MODE_NONE;
}

static int cxgbe_get_filter_mode_from_devargs(u32 val, bool closest_match)
{
        int vnic_mode, fmode = 0;
        bool found = false;
        u8 i;

        if (val >= CXGBE_DEVARGS_FILTER_MODE_MAX) {
                pr_err("Unsupported flags set in filter mode. Must be < 0x%x\n",
                       CXGBE_DEVARGS_FILTER_MODE_MAX);
                return -ERANGE;
        }

        vnic_mode = cxgbe_get_filter_vnic_mode_from_devargs(val);
        if (vnic_mode < 0) {
                pr_err("Unsupported Vnic-mode, more than 1 Vnic-mode selected\n");
                return vnic_mode;
        }

        if (vnic_mode)
                fmode |= F_VNIC_ID;
        if (val & CXGBE_DEVARGS_FILTER_MODE_PHYSICAL_PORT)
                fmode |= F_PORT;
        if (val & CXGBE_DEVARGS_FILTER_MODE_ETHERNET_DSTMAC)
                fmode |= F_MACMATCH;
        if (val & CXGBE_DEVARGS_FILTER_MODE_ETHERNET_ETHTYPE)
                fmode |= F_ETHERTYPE;
        if (val & CXGBE_DEVARGS_FILTER_MODE_VLAN_INNER)
                fmode |= F_VLAN;
        if (val & CXGBE_DEVARGS_FILTER_MODE_IP_TOS)
                fmode |= F_TOS;
        if (val & CXGBE_DEVARGS_FILTER_MODE_IP_PROTOCOL)
                fmode |= F_PROTOCOL;

        for (i = 0; i < ARRAY_SIZE(cxgbe_filter_mode_features); i++) {
                if ((cxgbe_filter_mode_features[i] & fmode) == fmode) {
                        found = true;
                        break;
                }
        }

        if (!found)
                return -EINVAL;

        return closest_match ? cxgbe_filter_mode_features[i] : fmode;
}

static int configure_filter_mode_mask(struct adapter *adap)
{
        u32 params[2], val[2], nparams = 0;
        int ret;

        if (!adap->devargs.filtermode && !adap->devargs.filtermask)
                return 0;

        if (!adap->devargs.filtermode || !adap->devargs.filtermask) {
                pr_err("Unsupported, Provide both filtermode and filtermask devargs\n");
                return -EINVAL;
        }

        if (adap->devargs.filtermask & ~adap->devargs.filtermode) {
                pr_err("Unsupported, filtermask (0x%x) must be subset of filtermode (0x%x)\n",
                       adap->devargs.filtermask, adap->devargs.filtermode);

                return -EINVAL;
        }

        params[0] = CXGBE_FW_PARAM_DEV(FILTER) |
                    V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_MODE_MASK);

        ret = cxgbe_get_filter_mode_from_devargs(adap->devargs.filtermode,
                                                 true);
        if (ret < 0) {
                pr_err("Unsupported filtermode devargs combination:0x%x\n",
                       adap->devargs.filtermode);
                return ret;
        }

        val[0] = V_FW_PARAMS_PARAM_FILTER_MODE(ret);

        ret = cxgbe_get_filter_mode_from_devargs(adap->devargs.filtermask,
                                                 false);
        if (ret < 0) {
                pr_err("Unsupported filtermask devargs combination:0x%x\n",
                       adap->devargs.filtermask);
                return ret;
        }

        val[0] |= V_FW_PARAMS_PARAM_FILTER_MASK(ret);

        nparams++;

        ret = cxgbe_get_filter_vnic_mode_from_devargs(adap->devargs.filtermode);
        if (ret < 0)
                return ret;

        if (ret) {
                params[1] = CXGBE_FW_PARAM_DEV(FILTER) |
                            V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_VNIC_MODE);

                val[1] = ret - 1;

                nparams++;
        }

        return t4_set_params(adap, adap->mbox, adap->pf, 0, nparams,
                             params, val);
}

static void configure_pcie_ext_tag(struct adapter *adapter)
{
        u16 v;
        int pos = t4_os_find_pci_capability(adapter, PCI_CAP_ID_EXP);

        if (!pos)
                return;

        if (pos > 0) {
                t4_os_pci_read_cfg2(adapter, pos + PCI_EXP_DEVCTL, &v);
                v |= PCI_EXP_DEVCTL_EXT_TAG;
                t4_os_pci_write_cfg2(adapter, pos + PCI_EXP_DEVCTL, v);
                if (is_t6(adapter->params.chip)) {
                        t4_set_reg_field(adapter, A_PCIE_CFG2,
                                         V_T6_TOTMAXTAG(M_T6_TOTMAXTAG),
                                         V_T6_TOTMAXTAG(7));
                        t4_set_reg_field(adapter, A_PCIE_CMD_CFG,
                                         V_T6_MINTAG(M_T6_MINTAG),
                                         V_T6_MINTAG(8));
                } else {
                        t4_set_reg_field(adapter, A_PCIE_CFG2,
                                         V_TOTMAXTAG(M_TOTMAXTAG),
                                         V_TOTMAXTAG(3));
                        t4_set_reg_field(adapter, A_PCIE_CMD_CFG,
                                         V_MINTAG(M_MINTAG),
                                         V_MINTAG(8));
                }
        }
}

/* Figure out how many Queue Sets we can support */
void cxgbe_configure_max_ethqsets(struct adapter *adapter)
{
        unsigned int ethqsets, reserved;

        /* We need to reserve an Ingress Queue for the Asynchronous Firmware
         * Event Queue and 1 Control Queue per port.
         *
         * For each Queue Set, we'll need the ability to allocate two Egress
         * Contexts -- one for the Ingress Queue Free List and one for the TX
         * Ethernet Queue.
         */
        reserved = max(adapter->params.nports, 1);
        if (is_pf4(adapter)) {
                struct pf_resources *pfres = &adapter->params.pfres;

                ethqsets = min(pfres->niqflint, pfres->nethctrl);
                if (ethqsets > (pfres->neq / 2))
                        ethqsets = pfres->neq / 2;
        } else {
                struct vf_resources *vfres = &adapter->params.vfres;

                ethqsets = min(vfres->niqflint, vfres->nethctrl);
                if (ethqsets > (vfres->neq / 2))
                        ethqsets = vfres->neq / 2;
        }

        ethqsets -= reserved;
        adapter->sge.max_ethqsets = ethqsets;
}

/*
 * Tweak configuration based on system architecture, etc.  Most of these have
 * defaults assigned to them by Firmware Configuration Files (if we're using
 * them) but need to be explicitly set if we're using hard-coded
 * initialization. So these are essentially common tweaks/settings for
 * Configuration Files and hard-coded initialization ...
 */
static int adap_init0_tweaks(struct adapter *adapter)
{
        u8 rx_dma_offset;

        /*
         * Fix up various Host-Dependent Parameters like Page Size, Cache
         * Line Size, etc.  The firmware default is for a 4KB Page Size and
         * 64B Cache Line Size ...
         */
        t4_fixup_host_params_compat(adapter, CXGBE_PAGE_SIZE, L1_CACHE_BYTES,
                                    T5_LAST_REV);

        /*
         * Keep the chip default offset to deliver Ingress packets into our
         * DMA buffers to zero
         */
        rx_dma_offset = 0;
        t4_set_reg_field(adapter, A_SGE_CONTROL, V_PKTSHIFT(M_PKTSHIFT),
                         V_PKTSHIFT(rx_dma_offset));

        t4_set_reg_field(adapter, A_SGE_FLM_CFG,
                         V_CREDITCNT(M_CREDITCNT) | M_CREDITCNTPACKING,
                         V_CREDITCNT(3) | V_CREDITCNTPACKING(1));

        t4_set_reg_field(adapter, A_SGE_INGRESS_RX_THRESHOLD,
                         V_THRESHOLD_3(M_THRESHOLD_3), V_THRESHOLD_3(32U));

        t4_set_reg_field(adapter, A_SGE_CONTROL2, V_IDMAARBROUNDROBIN(1U),
                         V_IDMAARBROUNDROBIN(1U));

        /*
         * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux
         * adds the pseudo header itself.
         */
        t4_tp_wr_bits_indirect(adapter, A_TP_INGRESS_CONFIG,
                               F_CSUM_HAS_PSEUDO_HDR, 0);

        return 0;
}

/*
 * Attempt to initialize the adapter via a Firmware Configuration File.
 */
static int adap_init0_config(struct adapter *adapter, int reset)
{
        u32 finiver, finicsum, cfcsum, param, val;
        struct fw_caps_config_cmd caps_cmd;
        unsigned long mtype = 0, maddr = 0;
        u8 config_issued = 0;
        char config_name[20];
        int cfg_addr, ret;

        /*
         * Reset device if necessary.
         */
        if (reset) {
                ret = t4_fw_reset(adapter, adapter->mbox,
                                  F_PIORSTMODE | F_PIORST);
                if (ret < 0) {
                        dev_warn(adapter, "Firmware reset failed, error %d\n",
                                 -ret);
                        goto bye;
                }
        }

        cfg_addr = t4_flash_cfg_addr(adapter);
        if (cfg_addr < 0) {
                ret = cfg_addr;
                dev_warn(adapter, "Finding address for firmware config file in flash failed, error %d\n",
                         -ret);
                goto bye;
        }

        strcpy(config_name, "On Flash");
        mtype = FW_MEMTYPE_CF_FLASH;
        maddr = cfg_addr;

        /* Enable HASH filter region when support is available. */
        val = 1;
        param = CXGBE_FW_PARAM_DEV(HASHFILTER_WITH_OFLD);
        t4_set_params(adapter, adapter->mbox, adapter->pf, 0, 1,
                      &param, &val);

        /*
         * Issue a Capability Configuration command to the firmware to get it
         * to parse the Configuration File.  We don't use t4_fw_config_file()
         * because we want the ability to modify various features after we've
         * processed the configuration file ...
         */
        memset(&caps_cmd, 0, sizeof(caps_cmd));
        caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
                                           F_FW_CMD_REQUEST | F_FW_CMD_READ);
        caps_cmd.cfvalid_to_len16 =
                cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID |
                            V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
                            V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
                            FW_LEN16(caps_cmd));
        ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
                         &caps_cmd);
        /*
         * If the CAPS_CONFIG failed with an ENOENT (for a Firmware
         * Configuration File in FLASH), our last gasp effort is to use the
         * Firmware Configuration File which is embedded in the firmware.  A
         * very few early versions of the firmware didn't have one embedded
         * but we can ignore those.
         */
        if (ret == -ENOENT) {
                dev_info(adapter, "%s: Going for embedded config in firmware..\n",
                         __func__);

                memset(&caps_cmd, 0, sizeof(caps_cmd));
                caps_cmd.op_to_write =
                        cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
                                    F_FW_CMD_REQUEST | F_FW_CMD_READ);
                caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd));
                ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd,
                                 sizeof(caps_cmd), &caps_cmd);
                strcpy(config_name, "Firmware Default");
        }

        config_issued = 1;
        if (ret < 0)
                goto bye;

        finiver = be32_to_cpu(caps_cmd.finiver);
        finicsum = be32_to_cpu(caps_cmd.finicsum);
        cfcsum = be32_to_cpu(caps_cmd.cfcsum);
        if (finicsum != cfcsum)
                dev_warn(adapter, "Configuration File checksum mismatch: [fini] csum=%#x, computed csum=%#x\n",
                         finicsum, cfcsum);

        /*
         * If we're a pure NIC driver then disable all offloading facilities.
         * This will allow the firmware to optimize aspects of the hardware
         * configuration which will result in improved performance.
         */
        caps_cmd.niccaps &= cpu_to_be16(~FW_CAPS_CONFIG_NIC_ETHOFLD);
        caps_cmd.toecaps = 0;
        caps_cmd.iscsicaps = 0;
        caps_cmd.rdmacaps = 0;
        caps_cmd.fcoecaps = 0;
        caps_cmd.cryptocaps = 0;

        /*
         * And now tell the firmware to use the configuration we just loaded.
         */
        caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
                                           F_FW_CMD_REQUEST | F_FW_CMD_WRITE);
        caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
        ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
                         NULL);
        if (ret < 0) {
                dev_warn(adapter, "Unable to finalize Firmware Capabilities %d\n",
                         -ret);
                goto bye;
        }

        /*
         * Tweak configuration based on system architecture, etc.
         */
        ret = adap_init0_tweaks(adapter);
        if (ret < 0) {
                dev_warn(adapter, "Unable to do init0-tweaks %d\n", -ret);
                goto bye;
        }

        /*
         * And finally tell the firmware to initialize itself using the
         * parameters from the Configuration File.
         */
        ret = t4_fw_initialize(adapter, adapter->mbox);
        if (ret < 0) {
                dev_warn(adapter, "Initializing Firmware failed, error %d\n",
                         -ret);
                goto bye;
        }

        /*
         * Return successfully and note that we're operating with parameters
         * not supplied by the driver, rather than from hard-wired
         * initialization constants buried in the driver.
         */
        dev_info(adapter,
                 "Successfully configured using Firmware Configuration File \"%s\", version %#x, computed checksum %#x\n",
                 config_name, finiver, cfcsum);

        return 0;

        /*
         * Something bad happened.  Return the error ...  (If the "error"
         * is that there's no Configuration File on the adapter we don't
         * want to issue a warning since this is fairly common.)
         */
bye:
        if (config_issued && ret != -ENOENT)
                dev_warn(adapter, "\"%s\" configuration file error %d\n",
                         config_name, -ret);

        dev_debug(adapter, "%s: returning ret = %d ..\n", __func__, ret);
        return ret;
}

static int adap_init0(struct adapter *adap)
{
        struct fw_caps_config_cmd caps_cmd;
        int ret = 0;
        u32 v, port_vec;
        enum dev_state state;
        u32 params[7], val[7];
        int reset = 1;
        int mbox = adap->mbox;

        /*
         * Contact FW, advertising Master capability.
         */
        ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state);
        if (ret < 0) {
                dev_err(adap, "%s: could not connect to FW, error %d\n",
                        __func__, -ret);
                goto bye;
        }

        CXGBE_DEBUG_MBOX(adap, "%s: adap->mbox = %d; ret = %d\n", __func__,
                         adap->mbox, ret);

        if (ret == mbox)
                adap->flags |= MASTER_PF;

        if (state == DEV_STATE_INIT) {
                /*
                 * Force halt and reset FW because a previous instance may have
                 * exited abnormally without properly shutting down
                 */
                ret = t4_fw_halt(adap, adap->mbox, reset);
                if (ret < 0) {
                        dev_err(adap, "Failed to halt. Exit.\n");
                        goto bye;
                }

                ret = t4_fw_restart(adap, adap->mbox, reset);
                if (ret < 0) {
                        dev_err(adap, "Failed to restart. Exit.\n");
                        goto bye;
                }
                state = (enum dev_state)((unsigned)state & ~DEV_STATE_INIT);
        }

        t4_get_version_info(adap);

        ret = t4_get_core_clock(adap, &adap->params.vpd);
        if (ret < 0) {
                dev_err(adap, "%s: could not get core clock, error %d\n",
                        __func__, -ret);
                goto bye;
        }

        /*
         * If the firmware is initialized already (and we're not forcing a
         * master initialization), note that we're living with existing
         * adapter parameters.  Otherwise, it's time to try initializing the
         * adapter ...
         */
        if (state == DEV_STATE_INIT) {
                dev_info(adap, "Coming up as %s: Adapter already initialized\n",
                         adap->flags & MASTER_PF ? "MASTER" : "SLAVE");
        } else {
                dev_info(adap, "Coming up as MASTER: Initializing adapter\n");

                ret = adap_init0_config(adap, reset);
                if (ret == -ENOENT) {
                        dev_err(adap,
                                "No Configuration File present on adapter. Using hard-wired configuration parameters.\n");
                        goto bye;
                }
        }
        if (ret < 0) {
                dev_err(adap, "could not initialize adapter, error %d\n", -ret);
                goto bye;
        }

        /* Now that we've successfully configured and initialized the adapter
         * (or found it already initialized), we can ask the Firmware what
         * resources it has provisioned for us.
         */
        ret = t4_get_pfres(adap);
        if (ret) {
                dev_err(adap->pdev_dev,
                        "Unable to retrieve resource provisioning info\n");
                goto bye;
        }

        /* Find out what ports are available to us. */
        v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
            V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &v, &port_vec);
        if (ret < 0) {
                dev_err(adap, "%s: failure in t4_query_params; error = %d\n",
                        __func__, ret);
                goto bye;
        }

        adap->params.nports = hweight32(port_vec);
        adap->params.portvec = port_vec;

        dev_debug(adap, "%s: adap->params.nports = %u\n", __func__,
                  adap->params.nports);

        /*
         * Give the SGE code a chance to pull in anything that it needs ...
         * Note that this must be called after we retrieve our VPD parameters
         * in order to know how to convert core ticks to seconds, etc.
         */
        ret = t4_sge_init(adap);
        if (ret < 0) {
                dev_err(adap, "t4_sge_init failed with error %d\n",
                        -ret);
                goto bye;
        }

        /*
         * Grab some of our basic fundamental operating parameters.
         */
        params[0] = CXGBE_FW_PARAM_PFVF(L2T_START);
        params[1] = CXGBE_FW_PARAM_PFVF(L2T_END);
        params[2] = CXGBE_FW_PARAM_PFVF(FILTER_START);
        params[3] = CXGBE_FW_PARAM_PFVF(FILTER_END);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 4, params, val);
        if (ret < 0)
                goto bye;
        adap->l2t_start = val[0];
        adap->l2t_end = val[1];
        adap->tids.ftid_base = val[2];
        adap->tids.nftids = val[3] - val[2] + 1;

        params[0] = CXGBE_FW_PARAM_PFVF(CLIP_START);
        params[1] = CXGBE_FW_PARAM_PFVF(CLIP_END);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2, params, val);
        if (ret < 0)
                goto bye;
        adap->clipt_start = val[0];
        adap->clipt_end = val[1];

        /*
         * Get device capabilities so we can determine what resources we need
         * to manage.
         */
        memset(&caps_cmd, 0, sizeof(caps_cmd));
        caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
                                     F_FW_CMD_REQUEST | F_FW_CMD_READ);
        caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
        ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
                         &caps_cmd);
        if (ret < 0)
                goto bye;

        if ((caps_cmd.niccaps & cpu_to_be16(FW_CAPS_CONFIG_NIC_HASHFILTER)) &&
            is_t6(adap->params.chip)) {
                if (cxgbe_init_hash_filter(adap) < 0)
                        goto bye;
        }

        /* See if FW supports FW_FILTER2 work request */
        if (is_t4(adap->params.chip)) {
                adap->params.filter2_wr_support = 0;
        } else {
                params[0] = CXGBE_FW_PARAM_DEV(FILTER2_WR);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
                                      1, params, val);
                adap->params.filter2_wr_support = (ret == 0 && val[0] != 0);
        }

        /* Check if FW supports returning vin.
         * If this is not supported, driver will interpret
         * these values from viid.
         */
        params[0] = CXGBE_FW_PARAM_DEV(OPAQUE_VIID_SMT_EXTN);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
                              1, params, val);
        adap->params.viid_smt_extn_support = (ret == 0 && val[0] != 0);

        /* query tid-related parameters */
        params[0] = CXGBE_FW_PARAM_DEV(NTID);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
                              params, val);
        if (ret < 0)
                goto bye;
        adap->tids.ntids = val[0];
        adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS);

        /* If we're running on newer firmware, let it know that we're
         * prepared to deal with encapsulated CPL messages.  Older
         * firmware won't understand this and we'll just get
         * unencapsulated messages ...
         */
        params[0] = CXGBE_FW_PARAM_PFVF(CPLFW4MSG_ENCAP);
        val[0] = 1;
        (void)t4_set_params(adap, adap->mbox, adap->pf, 0, 1, params, val);

        /*
         * Find out whether we're allowed to use the T5+ ULPTX MEMWRITE DSGL
         * capability.  Earlier versions of the firmware didn't have the
         * ULPTX_MEMWRITE_DSGL so we'll interpret a query failure as no
         * permission to use ULPTX MEMWRITE DSGL.
         */
        if (is_t4(adap->params.chip)) {
                adap->params.ulptx_memwrite_dsgl = false;
        } else {
                params[0] = CXGBE_FW_PARAM_DEV(ULPTX_MEMWRITE_DSGL);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
                                      1, params, val);
                adap->params.ulptx_memwrite_dsgl = (ret == 0 && val[0] != 0);
        }

        /* Query for max number of packets that can be coalesced for Tx */
        params[0] = CXGBE_FW_PARAM_PFVF(MAX_PKTS_PER_ETH_TX_PKTS_WR);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, params, val);
        if (!ret && val[0] > 0)
                adap->params.max_tx_coalesce_num = val[0];
        else
                adap->params.max_tx_coalesce_num = ETH_COALESCE_PKT_NUM;

        params[0] = CXGBE_FW_PARAM_DEV(VI_ENABLE_INGRESS_AFTER_LINKUP);
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, params, val);
        adap->params.vi_enable_rx = (ret == 0 && val[0] != 0);

        /* Read the RAW MPS entries. In T6, the last 2 TCAM entries
         * are reserved for RAW MAC addresses (rawf = 2, one per port).
         */
        if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
                params[0] = CXGBE_FW_PARAM_PFVF(RAWF_START);
                params[1] = CXGBE_FW_PARAM_PFVF(RAWF_END);
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2,
                                      params, val);
                if (ret == 0) {
                        adap->params.rawf_start = val[0];
                        adap->params.rawf_size = val[1] - val[0] + 1;
                }
        }

        /*
         * The MTU/MSS Table is initialized by now, so load their values.  If
         * we're initializing the adapter, then we'll make any modifications
         * we want to the MTU/MSS Table and also initialize the congestion
         * parameters.
         */
        t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
        if (state != DEV_STATE_INIT) {
                int i;

                /*
                 * The default MTU Table contains values 1492 and 1500.
                 * However, for TCP, it's better to have two values which are
                 * a multiple of 8 +/- 4 bytes apart near this popular MTU.
                 * This allows us to have a TCP Data Payload which is a
                 * multiple of 8 regardless of what combination of TCP Options
                 * are in use (always a multiple of 4 bytes) which is
                 * important for performance reasons.  For instance, if no
                 * options are in use, then we have a 20-byte IP header and a
                 * 20-byte TCP header.  In this case, a 1500-byte MSS would
                 * result in a TCP Data Payload of 1500 - 40 == 1460 bytes
                 * which is not a multiple of 8.  So using an MSS of 1488 in
                 * this case results in a TCP Data Payload of 1448 bytes which
                 * is a multiple of 8.  On the other hand, if 12-byte TCP Time
                 * Stamps have been negotiated, then an MTU of 1500 bytes
                 * results in a TCP Data Payload of 1448 bytes which, as
                 * above, is a multiple of 8 bytes ...
                 */
                for (i = 0; i < NMTUS; i++)
                        if (adap->params.mtus[i] == 1492) {
                                adap->params.mtus[i] = 1488;
                                break;
                        }

                t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
                             adap->params.b_wnd);
        }
        t4_init_sge_params(adap);
        ret = configure_filter_mode_mask(adap);
        if (ret < 0)
                goto bye;
        t4_init_tp_params(adap);
        configure_pcie_ext_tag(adap);
        configure_vlan_types(adap);
        cxgbe_configure_max_ethqsets(adap);

        adap->params.drv_memwin = MEMWIN_NIC;
        adap->flags |= FW_OK;
        dev_debug(adap, "%s: returning zero..\n", __func__);
        return 0;

        /*
         * Something bad happened.  If a command timed out or failed with EIO
         * FW does not operate within its spec or something catastrophic
         * happened to HW/FW, stop issuing commands.
         */
bye:
        if (ret != -ETIMEDOUT && ret != -EIO)
                t4_fw_bye(adap, adap->mbox);
        return ret;
}

/**
 * t4_os_portmod_changed - handle port module changes
 * @adap: the adapter associated with the module change
 * @port_id: the port index whose module status has changed
 *
 * This is the OS-dependent handler for port module changes.  It is
 * invoked when a port module is removed or inserted for any OS-specific
 * processing.
 */
void t4_os_portmod_changed(const struct adapter *adap, int port_id)
{
        static const char * const mod_str[] = {
                NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM"
        };

        const struct port_info *pi = adap2pinfo(adap, port_id);

        if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_NONE)
                dev_info(adap, "Port%d: port module unplugged\n", pi->port_id);
        else if (pi->link_cfg.mod_type < ARRAY_SIZE(mod_str))
                dev_info(adap, "Port%d: %s port module inserted\n", pi->port_id,
                         mod_str[pi->link_cfg.mod_type]);
        else if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
                dev_info(adap, "Port%d: unsupported port module inserted\n",
                         pi->port_id);
        else if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
                dev_info(adap, "Port%d: unknown port module inserted\n",
                         pi->port_id);
        else if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_ERROR)
                dev_info(adap, "Port%d: transceiver module error\n",
                         pi->port_id);
        else
                dev_info(adap, "Port%d: unknown module type %d inserted\n",
                         pi->port_id, pi->link_cfg.mod_type);
}

void t4_os_link_changed(struct adapter *adap, int port_id)
{
        struct port_info *pi = adap2pinfo(adap, port_id);

        /* If link status has not changed or if firmware doesn't
         * support enabling/disabling VI's Rx path during runtime,
         * then return.
         */
        if (adap->params.vi_enable_rx == 0 ||
            pi->vi_en_rx == pi->link_cfg.link_ok)
                return;

        /* Don't enable VI Rx path, if link has been administratively
         * turned off.
         */
        if (pi->vi_en_tx == 0 && pi->vi_en_rx == 0)
                return;

        /* When link goes down, disable the port's Rx path to drop
         * Rx traffic closer to the wire, instead of processing it
         * further in the Rx pipeline. The Rx path will be re-enabled
         * once the link up message comes in firmware event queue.
         */
        pi->vi_en_rx = pi->link_cfg.link_ok;
        t4_enable_vi(adap, adap->mbox, pi->viid, pi->vi_en_rx, pi->vi_en_tx);
}

bool cxgbe_force_linkup(struct adapter *adap)
{
        if (is_pf4(adap))
                return false;   /* force_linkup not required for pf driver */

        return adap->devargs.force_link_up;
}

/**
 * link_start - enable a port
 * @dev: the port to enable
 *
 * Performs the MAC and PHY actions needed to enable a port.
 */
int cxgbe_link_start(struct port_info *pi)
{
        struct adapter *adapter = pi->adapter;
        u64 conf_offloads;
        unsigned int mtu;
        int ret;

        mtu = pi->eth_dev->data->mtu;

        conf_offloads = pi->eth_dev->data->dev_conf.rxmode.offloads;

        /*
         * We do not set address filters and promiscuity here, the stack does
         * that step explicitly.
         */
        ret = t4_set_rxmode(adapter, adapter->mbox, pi->viid, mtu, -1, -1, -1,
                            !!(conf_offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP),
                            true);
        if (ret == 0) {
                ret = cxgbe_mpstcam_modify(pi, (int)pi->xact_addr_filt,
                                (u8 *)&pi->eth_dev->data->mac_addrs[0]);
                if (ret >= 0) {
                        pi->xact_addr_filt = ret;
                        ret = 0;
                }
        }
        if (ret == 0 && is_pf4(adapter))
                ret = t4_link_l1cfg(pi, pi->link_cfg.admin_caps);
        if (ret == 0) {
                /* Disable VI Rx until link up message is received in
                 * firmware event queue, if firmware supports enabling/
                 * disabling VI Rx at runtime.
                 */
                pi->vi_en_rx = adapter->params.vi_enable_rx ? 0 : 1;
                pi->vi_en_tx = 1;
                ret = t4_enable_vi_params(adapter, adapter->mbox, pi->viid,
                                          pi->vi_en_rx, pi->vi_en_tx, false);
        }

        if (ret == 0 && cxgbe_force_linkup(adapter))
                pi->eth_dev->data->dev_link.link_status = RTE_ETH_LINK_UP;
        return ret;
}

/**
 * cxgbe_write_rss_conf - flash the RSS configuration for a given port
 * @pi: the port
 * @rss_hf: Hash configuration to apply
 */
int cxgbe_write_rss_conf(const struct port_info *pi, uint64_t rss_hf)
{
        struct adapter *adapter = pi->adapter;
        const struct sge_eth_rxq *rxq;
        u64 flags = 0;
        u16 rss;
        int err;

        /*  Should never be called before setting up sge eth rx queues */
        if (!(adapter->flags & FULL_INIT_DONE)) {
                dev_err(adap, "%s No RXQs available on port %d\n",
                        __func__, pi->port_id);
                return -EINVAL;
        }

        /* Don't allow unsupported hash functions */
        if (rss_hf & ~CXGBE_RSS_HF_ALL)
                return -EINVAL;

        if (rss_hf & CXGBE_RSS_HF_IPV4_MASK)
                flags |= F_FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN;

        if (rss_hf & RTE_ETH_RSS_NONFRAG_IPV4_TCP)
                flags |= F_FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN;

        if (rss_hf & RTE_ETH_RSS_NONFRAG_IPV4_UDP)
                flags |= F_FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN |
                         F_FW_RSS_VI_CONFIG_CMD_UDPEN;

        if (rss_hf & CXGBE_RSS_HF_IPV6_MASK)
                flags |= F_FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN;

        if (rss_hf & CXGBE_RSS_HF_TCP_IPV6_MASK)
                flags |= F_FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN |
                         F_FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN;

        if (rss_hf & CXGBE_RSS_HF_UDP_IPV6_MASK)
                flags |= F_FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN |
                         F_FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN |
                         F_FW_RSS_VI_CONFIG_CMD_UDPEN;

        rxq = &adapter->sge.ethrxq[pi->first_rxqset];
        rss = rxq[0].rspq.abs_id;

        /* If Tunnel All Lookup isn't specified in the global RSS
         * Configuration, then we need to specify a default Ingress
         * Queue for any ingress packets which aren't hashed.  We'll
         * use our first ingress queue ...
         */
        err = t4_config_vi_rss(adapter, adapter->mbox, pi->viid,
                               flags, rss);
        return err;
}

/**
 * cxgbe_write_rss - write the RSS table for a given port
 * @pi: the port
 * @queues: array of queue indices for RSS
 *
 * Sets up the portion of the HW RSS table for the port's VI to distribute
 * packets to the Rx queues in @queues.
 */
int cxgbe_write_rss(const struct port_info *pi, const u16 *queues)
{
        u16 *rss;
        int i, err;
        struct adapter *adapter = pi->adapter;
        const struct sge_eth_rxq *rxq;

        /*  Should never be called before setting up sge eth rx queues */
        BUG_ON(!(adapter->flags & FULL_INIT_DONE));

        rxq = &adapter->sge.ethrxq[pi->first_rxqset];
        rss = rte_zmalloc(NULL, pi->rss_size * sizeof(u16), 0);
        if (!rss)
                return -ENOMEM;

        /* map the queue indices to queue ids */
        for (i = 0; i < pi->rss_size; i++, queues++)
                rss[i] = rxq[*queues].rspq.abs_id;

        err = t4_config_rss_range(adapter, adapter->pf, pi->viid, 0,
                                  pi->rss_size, rss, pi->rss_size);
        rte_free(rss);
        return err;
}

/**
 * setup_rss - configure RSS
 * @adapter: the adapter
 *
 * Sets up RSS to distribute packets to multiple receive queues.  We
 * configure the RSS CPU lookup table to distribute to the number of HW
 * receive queues, and the response queue lookup table to narrow that
 * down to the response queues actually configured for each port.
 * We always configure the RSS mapping for all ports since the mapping
 * table has plenty of entries.
 */
int cxgbe_setup_rss(struct port_info *pi)
{
        int j, err;
        struct adapter *adapter = pi->adapter;

        dev_debug(adapter, "%s:  pi->rss_size = %u; pi->n_rx_qsets = %u\n",
                  __func__, pi->rss_size, pi->n_rx_qsets);

        if (!(pi->flags & PORT_RSS_DONE)) {
                if (adapter->flags & FULL_INIT_DONE) {
                        /* Fill default values with equal distribution */
                        for (j = 0; j < pi->rss_size; j++)
                                pi->rss[j] = j % pi->n_rx_qsets;

                        err = cxgbe_write_rss(pi, pi->rss);
                        if (err)
                                return err;

                        err = cxgbe_write_rss_conf(pi, pi->rss_hf);
                        if (err)
                                return err;
                        pi->flags |= PORT_RSS_DONE;
                }
        }
        return 0;
}

/*
 * Enable NAPI scheduling and interrupt generation for all Rx queues.
 */
static void enable_rx(struct adapter *adap, struct sge_rspq *q)
{
        /* 0-increment GTS to start the timer and enable interrupts */
        t4_write_reg(adap, is_pf4(adap) ? MYPF_REG(A_SGE_PF_GTS) :
                                          T4VF_SGE_BASE_ADDR + A_SGE_VF_GTS,
                     V_SEINTARM(q->intr_params) |
                     V_INGRESSQID(q->cntxt_id));
}

void cxgbe_enable_rx_queues(struct port_info *pi)
{
        struct adapter *adap = pi->adapter;
        struct sge *s = &adap->sge;
        unsigned int i;

        for (i = 0; i < pi->n_rx_qsets; i++)
                enable_rx(adap, &s->ethrxq[pi->first_rxqset + i].rspq);
}

/**
 * fw_caps_to_speed_caps - translate Firmware Port Caps to Speed Caps.
 * @port_type: Firmware Port Type
 * @fw_caps: Firmware Port Capabilities
 * @speed_caps: Device Info Speed Capabilities
 *
 * Translate a Firmware Port Capabilities specification to Device Info
 * Speed Capabilities.
 */
static void fw_caps_to_speed_caps(enum fw_port_type port_type,
                                  unsigned int fw_caps,
                                  u32 *speed_caps)
{
#define SET_SPEED(__speed_name) \
        do { \
                *speed_caps |= RTE_ETH_LINK_ ## __speed_name; \
        } while (0)

#define FW_CAPS_TO_SPEED(__fw_name) \
        do { \
                if (fw_caps & FW_PORT_CAP32_ ## __fw_name) \
                        SET_SPEED(__fw_name); \
        } while (0)

        switch (port_type) {
        case FW_PORT_TYPE_BT_SGMII:
        case FW_PORT_TYPE_BT_XFI:
        case FW_PORT_TYPE_BT_XAUI:
                FW_CAPS_TO_SPEED(SPEED_100M);
                FW_CAPS_TO_SPEED(SPEED_1G);
                FW_CAPS_TO_SPEED(SPEED_10G);
                break;

        case FW_PORT_TYPE_KX4:
        case FW_PORT_TYPE_KX:
        case FW_PORT_TYPE_FIBER_XFI:
        case FW_PORT_TYPE_FIBER_XAUI:
        case FW_PORT_TYPE_SFP:
        case FW_PORT_TYPE_QSFP_10G:
        case FW_PORT_TYPE_QSA:
                FW_CAPS_TO_SPEED(SPEED_1G);
                FW_CAPS_TO_SPEED(SPEED_10G);
                break;

        case FW_PORT_TYPE_KR:
                SET_SPEED(SPEED_10G);
                break;

        case FW_PORT_TYPE_BP_AP:
        case FW_PORT_TYPE_BP4_AP:
                SET_SPEED(SPEED_1G);
                SET_SPEED(SPEED_10G);
                break;

        case FW_PORT_TYPE_BP40_BA:
        case FW_PORT_TYPE_QSFP:
                SET_SPEED(SPEED_40G);
                break;

        case FW_PORT_TYPE_CR_QSFP:
        case FW_PORT_TYPE_SFP28:
        case FW_PORT_TYPE_KR_SFP28:
                FW_CAPS_TO_SPEED(SPEED_1G);
                FW_CAPS_TO_SPEED(SPEED_10G);
                FW_CAPS_TO_SPEED(SPEED_25G);
                break;

        case FW_PORT_TYPE_CR2_QSFP:
                SET_SPEED(SPEED_50G);
                break;

        case FW_PORT_TYPE_KR4_100G:
        case FW_PORT_TYPE_CR4_QSFP:
                FW_CAPS_TO_SPEED(SPEED_25G);
                FW_CAPS_TO_SPEED(SPEED_40G);
                FW_CAPS_TO_SPEED(SPEED_50G);
                FW_CAPS_TO_SPEED(SPEED_100G);
                break;

        default:
                break;
        }

#undef FW_CAPS_TO_SPEED
#undef SET_SPEED
}

/**
 * cxgbe_get_speed_caps - Fetch supported speed capabilities
 * @pi: Underlying port's info
 * @speed_caps: Device Info speed capabilities
 *
 * Fetch supported speed capabilities of the underlying port.
 */
void cxgbe_get_speed_caps(struct port_info *pi, u32 *speed_caps)
{
        *speed_caps = 0;

        fw_caps_to_speed_caps(pi->link_cfg.port_type, pi->link_cfg.pcaps,
                              speed_caps);

        if (!(pi->link_cfg.pcaps & FW_PORT_CAP32_ANEG))
                *speed_caps |= RTE_ETH_LINK_SPEED_FIXED;
}

/**
 * cxgbe_set_link_status - Set device link up or down.
 * @pi: Underlying port's info
 * @status: 0 - down, 1 - up
 *
 * Set the device link up or down.
 */
int cxgbe_set_link_status(struct port_info *pi, bool status)
{
        struct adapter *adapter = pi->adapter;
        int err = 0;

        /* Wait for link up message from firmware to enable Rx path,
         * if firmware supports enabling/disabling VI Rx at runtime.
         */
        pi->vi_en_rx = adapter->params.vi_enable_rx ? 0 : status;
        pi->vi_en_tx = status;
        err = t4_enable_vi(adapter, adapter->mbox, pi->viid, pi->vi_en_rx,
                           pi->vi_en_tx);
        if (err) {
                dev_err(adapter, "%s: disable_vi failed: %d\n", __func__, err);
                return err;
        }

        if (!status)
                t4_reset_link_config(adapter, pi->pidx);

        return 0;
}

/**
 * cxgb_up - enable the adapter
 * @adap: adapter being enabled
 *
 * Called when the first port is enabled, this function performs the
 * actions necessary to make an adapter operational, such as completing
 * the initialization of HW modules, and enabling interrupts.
 */
int cxgbe_up(struct adapter *adap)
{
        enable_rx(adap, &adap->sge.fw_evtq);
        t4_sge_tx_monitor_start(adap);
        if (is_pf4(adap))
                t4_intr_enable(adap);
        adap->flags |= FULL_INIT_DONE;

        /* TODO: deadman watchdog ?? */
        return 0;
}

/*
 * Close the port
 */
int cxgbe_down(struct port_info *pi)
{
        return cxgbe_set_link_status(pi, false);
}

/*
 * Release resources when all the ports have been stopped.
 */
void cxgbe_close(struct adapter *adapter)
{
        if (adapter->flags & FULL_INIT_DONE) {
                tid_free(&adapter->tids);
                t4_cleanup_mpstcam(adapter);
                t4_cleanup_clip_tbl(adapter);
                t4_cleanup_l2t(adapter);
                t4_cleanup_smt(adapter);
                if (is_pf4(adapter))
                        t4_intr_disable(adapter);
                t4_sge_tx_monitor_stop(adapter);
                t4_free_sge_resources(adapter);
                adapter->flags &= ~FULL_INIT_DONE;
        }

        cxgbe_cfg_queues_free(adapter);

        if (is_pf4(adapter) && (adapter->flags & FW_OK))
                t4_fw_bye(adapter, adapter->mbox);
}

static void adap_smt_index(struct adapter *adapter, u32 *smt_start_idx,
                           u32 *smt_size)
{
        u32 params[2], smt_val[2];
        int ret;

        params[0] = CXGBE_FW_PARAM_PFVF(GET_SMT_START);
        params[1] = CXGBE_FW_PARAM_PFVF(GET_SMT_SIZE);

        ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
                              2, params, smt_val);

        /* if FW doesn't recognize this command then set it to default setting
         * which is start index as 0 and size as 256.
         */
        if (ret < 0) {
                *smt_start_idx = 0;
                *smt_size = SMT_SIZE;
        } else {
                *smt_start_idx = smt_val[0];
                /* smt size can be zero, if nsmt is not yet configured in
                 * the config file or set as zero, then configure all the
                 * remaining entries to this PF itself.
                 */
                if (!smt_val[1])
                        *smt_size = SMT_SIZE - *smt_start_idx;
                else
                        *smt_size = smt_val[1];
        }
}

int cxgbe_probe(struct adapter *adapter)
{
        u32 smt_start_idx, smt_size;
        struct port_info *pi;
        int func, i;
        int err = 0;
        u32 whoami;
        int chip;

        whoami = t4_read_reg(adapter, A_PL_WHOAMI);
        chip = t4_get_chip_type(adapter,
                        CHELSIO_PCI_ID_VER(adapter->pdev->id.device_id));
        if (chip < 0)
                return chip;

        func = CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5 ?
               G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);

        adapter->mbox = func;
        adapter->pf = func;

        t4_os_lock_init(&adapter->mbox_lock);
        TAILQ_INIT(&adapter->mbox_list);
        t4_os_lock_init(&adapter->win0_lock);

        err = t4_prep_adapter(adapter);
        if (err)
                return err;

        setup_memwin(adapter);
        err = adap_init0(adapter);
        if (err) {
                dev_err(adapter, "%s: Adapter initialization failed, error %d\n",
                        __func__, err);
                goto out_free;
        }

        if (!is_t4(adapter->params.chip)) {
                /*
                 * The userspace doorbell BAR is split evenly into doorbell
                 * regions, each associated with an egress queue.  If this
                 * per-queue region is large enough (at least UDBS_SEG_SIZE)
                 * then it can be used to submit a tx work request with an
                 * implied doorbell.  Enable write combining on the BAR if
                 * there is room for such work requests.
                 */
                int s_qpp, qpp, num_seg;

                s_qpp = (S_QUEUESPERPAGEPF0 +
                        (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) *
                        adapter->pf);
                qpp = 1 << ((t4_read_reg(adapter,
                                A_SGE_EGRESS_QUEUES_PER_PAGE_PF) >> s_qpp)
                                & M_QUEUESPERPAGEPF0);
                num_seg = CXGBE_PAGE_SIZE / UDBS_SEG_SIZE;
                if (qpp > num_seg)
                        dev_warn(adapter, "Incorrect SGE EGRESS QUEUES_PER_PAGE configuration, continuing in debug mode\n");

                adapter->bar2 = (void *)adapter->pdev->mem_resource[2].addr;
                if (!adapter->bar2) {
                        dev_err(adapter, "cannot map device bar2 region\n");
                        err = -ENOMEM;
                        goto out_free;
                }
                t4_write_reg(adapter, A_SGE_STAT_CFG, V_STATSOURCE_T5(7) |
                             V_STATMODE(0));
        }

        for_each_port(adapter, i) {
                const unsigned int numa_node = rte_socket_id();
                char name[RTE_ETH_NAME_MAX_LEN];
                struct rte_eth_dev *eth_dev;

                snprintf(name, sizeof(name), "%s_%d",
                         adapter->pdev->device.name, i);

                if (i == 0) {
                        /* First port is already allocated by DPDK */
                        eth_dev = adapter->eth_dev;
                        goto allocate_mac;
                }

                /*
                 * now do all data allocation - for eth_dev structure,
                 * and internal (private) data for the remaining ports
                 */

                /* reserve an ethdev entry */
                eth_dev = rte_eth_dev_allocate(name);
                if (!eth_dev)
                        goto out_free;

                eth_dev->data->dev_private =
                        rte_zmalloc_socket(name, sizeof(struct port_info),
                                           RTE_CACHE_LINE_SIZE, numa_node);
                if (!eth_dev->data->dev_private)
                        goto out_free;

allocate_mac:
                pi = eth_dev->data->dev_private;
                adapter->port[i] = pi;
                pi->eth_dev = eth_dev;
                pi->adapter = adapter;
                pi->xact_addr_filt = -1;
                pi->port_id = i;
                pi->pidx = i;

                pi->eth_dev->device = &adapter->pdev->device;
                pi->eth_dev->dev_ops = adapter->eth_dev->dev_ops;
                pi->eth_dev->tx_pkt_burst = adapter->eth_dev->tx_pkt_burst;
                pi->eth_dev->rx_pkt_burst = adapter->eth_dev->rx_pkt_burst;

                rte_eth_copy_pci_info(pi->eth_dev, adapter->pdev);

                pi->eth_dev->data->mac_addrs = rte_zmalloc(name,
                                                        RTE_ETHER_ADDR_LEN, 0);
                if (!pi->eth_dev->data->mac_addrs) {
                        dev_err(adapter, "%s: Mem allocation failed for storing mac addr, aborting\n",
                                __func__);
                        err = -1;
                        goto out_free;
                }

                if (i > 0) {
                        /* First port will be notified by upper layer */
                        rte_eth_dev_probing_finish(eth_dev);
                }
        }

        if (adapter->flags & FW_OK) {
                err = t4_port_init(adapter, adapter->mbox, adapter->pf, 0);
                if (err) {
                        dev_err(adapter, "%s: t4_port_init failed with err %d\n",
                                __func__, err);
                        goto out_free;
                }
        }

        err = cxgbe_cfg_queues(adapter->eth_dev);
        if (err)
                goto out_free;

        cxgbe_print_adapter_info(adapter);
        cxgbe_print_port_info(adapter);

        adapter->clipt = t4_init_clip_tbl(adapter->clipt_start,
                                          adapter->clipt_end);
        if (!adapter->clipt) {
                /* We tolerate a lack of clip_table, giving up some
                 * functionality
                 */
                dev_warn(adapter, "could not allocate CLIP. Continuing\n");
        }

        adap_smt_index(adapter, &smt_start_idx, &smt_size);
        adapter->smt = t4_init_smt(smt_start_idx, smt_size);
        if (!adapter->smt)
                dev_warn(adapter, "could not allocate SMT, continuing\n");

        adapter->l2t = t4_init_l2t(adapter->l2t_start, adapter->l2t_end);
        if (!adapter->l2t) {
                /* We tolerate a lack of L2T, giving up some functionality */
                dev_warn(adapter, "could not allocate L2T. Continuing\n");
        }

        if (tid_init(&adapter->tids) < 0) {
                /* Disable filtering support */
                dev_warn(adapter, "could not allocate TID table, "
                         "filter support disabled. Continuing\n");
        }

        t4_os_lock_init(&adapter->flow_lock);

        adapter->mpstcam = t4_init_mpstcam(adapter);
        if (!adapter->mpstcam)
                dev_warn(adapter, "could not allocate mps tcam table."
                         " Continuing\n");

        if (is_hashfilter(adapter)) {
                if (t4_read_reg(adapter, A_LE_DB_CONFIG) & F_HASHEN) {
                        u32 hash_base, hash_reg;

                        hash_reg = A_LE_DB_TID_HASHBASE;
                        hash_base = t4_read_reg(adapter, hash_reg);
                        adapter->tids.hash_base = hash_base / 4;
                }
        } else {
                /* Disable hash filtering support */
                dev_warn(adapter,
                         "Maskless filter support disabled. Continuing\n");
        }

        err = cxgbe_init_rss(adapter);
        if (err)
                goto out_free;

        return 0;

out_free:
        cxgbe_cfg_queues_free(adapter);

        for_each_port(adapter, i) {
                pi = adap2pinfo(adapter, i);
                if (pi->viid != 0)
                        t4_free_vi(adapter, adapter->mbox, adapter->pf,
                                   0, pi->viid);
                rte_eth_dev_release_port(pi->eth_dev);
        }

        if (adapter->flags & FW_OK)
                t4_fw_bye(adapter, adapter->mbox);
        return -err;
}