1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright(c) 2018-2021 HiSilicon Limited.
5 #include <linux/pci_regs.h>
7 #include <ethdev_pci.h>
11 #include "hns3_ethdev.h"
12 #include "hns3_common.h"
13 #include "hns3_logs.h"
14 #include "hns3_rxtx.h"
15 #include "hns3_regs.h"
16 #include "hns3_intr.h"
19 #include "hns3_flow.h"
21 #define HNS3VF_KEEP_ALIVE_INTERVAL 2000000 /* us */
22 #define HNS3VF_SERVICE_INTERVAL 1000000 /* us */
24 #define HNS3VF_RESET_WAIT_MS 20
25 #define HNS3VF_RESET_WAIT_CNT 2000
27 /* Reset related Registers */
28 #define HNS3_GLOBAL_RESET_BIT 0
29 #define HNS3_CORE_RESET_BIT 1
30 #define HNS3_IMP_RESET_BIT 2
31 #define HNS3_FUN_RST_ING_B 0
33 enum hns3vf_evt_cause {
34 HNS3VF_VECTOR0_EVENT_RST,
35 HNS3VF_VECTOR0_EVENT_MBX,
36 HNS3VF_VECTOR0_EVENT_OTHER,
39 static enum hns3_reset_level hns3vf_get_reset_level(struct hns3_hw *hw,
41 static int hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
42 static int hns3vf_dev_configure_vlan(struct rte_eth_dev *dev);
44 static int hns3vf_add_mc_mac_addr(struct hns3_hw *hw,
45 struct rte_ether_addr *mac_addr);
46 static int hns3vf_remove_mc_mac_addr(struct hns3_hw *hw,
47 struct rte_ether_addr *mac_addr);
48 static int hns3vf_dev_link_update(struct rte_eth_dev *eth_dev,
49 __rte_unused int wait_to_complete);
51 /* set PCI bus mastering */
53 hns3vf_set_bus_master(const struct rte_pci_device *device, bool op)
58 ret = rte_pci_read_config(device, ®, sizeof(reg), PCI_COMMAND);
60 PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
66 /* set the master bit */
67 reg |= PCI_COMMAND_MASTER;
69 reg &= ~(PCI_COMMAND_MASTER);
71 return rte_pci_write_config(device, ®, sizeof(reg), PCI_COMMAND);
75 * hns3vf_find_pci_capability - lookup a capability in the PCI capability list
76 * @cap: the capability
78 * Return the address of the given capability within the PCI capability list.
81 hns3vf_find_pci_capability(const struct rte_pci_device *device, int cap)
83 #define MAX_PCIE_CAPABILITY 48
90 ret = rte_pci_read_config(device, &status, sizeof(status), PCI_STATUS);
92 PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x", PCI_STATUS);
96 if (!(status & PCI_STATUS_CAP_LIST))
99 ttl = MAX_PCIE_CAPABILITY;
100 ret = rte_pci_read_config(device, &pos, sizeof(pos),
101 PCI_CAPABILITY_LIST);
103 PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
104 PCI_CAPABILITY_LIST);
108 while (ttl-- && pos >= PCI_STD_HEADER_SIZEOF) {
109 ret = rte_pci_read_config(device, &id, sizeof(id),
110 (pos + PCI_CAP_LIST_ID));
112 PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
113 (pos + PCI_CAP_LIST_ID));
123 ret = rte_pci_read_config(device, &pos, sizeof(pos),
124 (pos + PCI_CAP_LIST_NEXT));
126 PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
127 (pos + PCI_CAP_LIST_NEXT));
135 hns3vf_enable_msix(const struct rte_pci_device *device, bool op)
141 pos = hns3vf_find_pci_capability(device, PCI_CAP_ID_MSIX);
143 ret = rte_pci_read_config(device, &control, sizeof(control),
144 (pos + PCI_MSIX_FLAGS));
146 PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
147 (pos + PCI_MSIX_FLAGS));
152 control |= PCI_MSIX_FLAGS_ENABLE;
154 control &= ~PCI_MSIX_FLAGS_ENABLE;
155 ret = rte_pci_write_config(device, &control, sizeof(control),
156 (pos + PCI_MSIX_FLAGS));
158 PMD_INIT_LOG(ERR, "failed to write PCI offset 0x%x",
159 (pos + PCI_MSIX_FLAGS));
170 hns3vf_add_uc_mac_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
172 /* mac address was checked by upper level interface */
173 char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
176 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
177 HNS3_MBX_MAC_VLAN_UC_ADD, mac_addr->addr_bytes,
178 RTE_ETHER_ADDR_LEN, false, NULL, 0);
180 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
182 hns3_err(hw, "failed to add uc mac addr(%s), ret = %d",
189 hns3vf_remove_uc_mac_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
191 /* mac address was checked by upper level interface */
192 char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
195 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
196 HNS3_MBX_MAC_VLAN_UC_REMOVE,
197 mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN,
200 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
202 hns3_err(hw, "failed to add uc mac addr(%s), ret = %d",
209 hns3vf_set_default_mac_addr(struct rte_eth_dev *dev,
210 struct rte_ether_addr *mac_addr)
212 #define HNS3_TWO_ETHER_ADDR_LEN (RTE_ETHER_ADDR_LEN * 2)
213 struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
214 struct rte_ether_addr *old_addr;
215 uint8_t addr_bytes[HNS3_TWO_ETHER_ADDR_LEN]; /* for 2 MAC addresses */
216 char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
220 * It has been guaranteed that input parameter named mac_addr is valid
221 * address in the rte layer of DPDK framework.
223 old_addr = (struct rte_ether_addr *)hw->mac.mac_addr;
224 rte_spinlock_lock(&hw->lock);
225 memcpy(addr_bytes, mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN);
226 memcpy(&addr_bytes[RTE_ETHER_ADDR_LEN], old_addr->addr_bytes,
229 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
230 HNS3_MBX_MAC_VLAN_UC_MODIFY, addr_bytes,
231 HNS3_TWO_ETHER_ADDR_LEN, true, NULL, 0);
234 * The hns3 VF PMD depends on the hns3 PF kernel ethdev
235 * driver. When user has configured a MAC address for VF device
236 * by "ip link set ..." command based on the PF device, the hns3
237 * PF kernel ethdev driver does not allow VF driver to request
238 * reconfiguring a different default MAC address, and return
239 * -EPREM to VF driver through mailbox.
242 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
244 hns3_warn(hw, "Has permanent mac addr(%s) for vf",
247 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
249 hns3_err(hw, "Failed to set mac addr(%s) for vf: %d",
254 rte_ether_addr_copy(mac_addr,
255 (struct rte_ether_addr *)hw->mac.mac_addr);
256 rte_spinlock_unlock(&hw->lock);
262 hns3vf_add_mc_mac_addr(struct hns3_hw *hw,
263 struct rte_ether_addr *mac_addr)
265 char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
268 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MULTICAST,
269 HNS3_MBX_MAC_VLAN_MC_ADD,
270 mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN, false,
273 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
275 hns3_err(hw, "Failed to add mc mac addr(%s) for vf: %d",
283 hns3vf_remove_mc_mac_addr(struct hns3_hw *hw,
284 struct rte_ether_addr *mac_addr)
286 char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
289 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MULTICAST,
290 HNS3_MBX_MAC_VLAN_MC_REMOVE,
291 mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN, false,
294 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
296 hns3_err(hw, "Failed to remove mc mac addr(%s) for vf: %d",
304 hns3vf_set_promisc_mode(struct hns3_hw *hw, bool en_bc_pmc,
305 bool en_uc_pmc, bool en_mc_pmc)
307 struct hns3_mbx_vf_to_pf_cmd *req;
308 struct hns3_cmd_desc desc;
311 req = (struct hns3_mbx_vf_to_pf_cmd *)desc.data;
314 * The hns3 VF PMD depends on the hns3 PF kernel ethdev driver,
315 * so there are some features for promiscuous/allmulticast mode in hns3
317 * 1. The promiscuous/allmulticast mode can be configured successfully
318 * only based on the trusted VF device. If based on the non trusted
319 * VF device, configuring promiscuous/allmulticast mode will fail.
320 * The hns3 VF device can be configured as trusted device by hns3 PF
321 * kernel ethdev driver on the host by the following command:
322 * "ip link set <eth num> vf <vf id> turst on"
323 * 2. After the promiscuous mode is configured successfully, hns3 VF PMD
324 * can receive the ingress and outgoing traffic. This includes
325 * all the ingress packets, all the packets sent from the PF and
326 * other VFs on the same physical port.
327 * 3. Note: Because of the hardware constraints, By default vlan filter
328 * is enabled and couldn't be turned off based on VF device, so vlan
329 * filter is still effective even in promiscuous mode. If upper
330 * applications don't call rte_eth_dev_vlan_filter API function to
331 * set vlan based on VF device, hns3 VF PMD will can't receive
332 * the packets with vlan tag in promiscuous mode.
334 hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MBX_VF_TO_PF, false);
335 req->msg[0] = HNS3_MBX_SET_PROMISC_MODE;
336 req->msg[1] = en_bc_pmc ? 1 : 0;
337 req->msg[2] = en_uc_pmc ? 1 : 0;
338 req->msg[3] = en_mc_pmc ? 1 : 0;
339 req->msg[4] = hw->promisc_mode == HNS3_LIMIT_PROMISC_MODE ? 1 : 0;
341 ret = hns3_cmd_send(hw, &desc, 1);
343 hns3_err(hw, "Set promisc mode fail, ret = %d", ret);
349 hns3vf_dev_promiscuous_enable(struct rte_eth_dev *dev)
351 struct hns3_adapter *hns = dev->data->dev_private;
352 struct hns3_hw *hw = &hns->hw;
355 ret = hns3vf_set_promisc_mode(hw, true, true, true);
357 hns3_err(hw, "Failed to enable promiscuous mode, ret = %d",
363 hns3vf_dev_promiscuous_disable(struct rte_eth_dev *dev)
365 bool allmulti = dev->data->all_multicast ? true : false;
366 struct hns3_adapter *hns = dev->data->dev_private;
367 struct hns3_hw *hw = &hns->hw;
370 ret = hns3vf_set_promisc_mode(hw, true, false, allmulti);
372 hns3_err(hw, "Failed to disable promiscuous mode, ret = %d",
378 hns3vf_dev_allmulticast_enable(struct rte_eth_dev *dev)
380 struct hns3_adapter *hns = dev->data->dev_private;
381 struct hns3_hw *hw = &hns->hw;
384 if (dev->data->promiscuous)
387 ret = hns3vf_set_promisc_mode(hw, true, false, true);
389 hns3_err(hw, "Failed to enable allmulticast mode, ret = %d",
395 hns3vf_dev_allmulticast_disable(struct rte_eth_dev *dev)
397 struct hns3_adapter *hns = dev->data->dev_private;
398 struct hns3_hw *hw = &hns->hw;
401 if (dev->data->promiscuous)
404 ret = hns3vf_set_promisc_mode(hw, true, false, false);
406 hns3_err(hw, "Failed to disable allmulticast mode, ret = %d",
412 hns3vf_restore_promisc(struct hns3_adapter *hns)
414 struct hns3_hw *hw = &hns->hw;
415 bool allmulti = hw->data->all_multicast ? true : false;
417 if (hw->data->promiscuous)
418 return hns3vf_set_promisc_mode(hw, true, true, true);
420 return hns3vf_set_promisc_mode(hw, true, false, allmulti);
424 hns3vf_bind_ring_with_vector(struct hns3_hw *hw, uint16_t vector_id,
425 bool mmap, enum hns3_ring_type queue_type,
428 struct hns3_vf_bind_vector_msg bind_msg;
433 memset(&bind_msg, 0, sizeof(bind_msg));
434 code = mmap ? HNS3_MBX_MAP_RING_TO_VECTOR :
435 HNS3_MBX_UNMAP_RING_TO_VECTOR;
436 bind_msg.vector_id = (uint8_t)vector_id;
438 if (queue_type == HNS3_RING_TYPE_RX)
439 bind_msg.param[0].int_gl_index = HNS3_RING_GL_RX;
441 bind_msg.param[0].int_gl_index = HNS3_RING_GL_TX;
443 bind_msg.param[0].ring_type = queue_type;
444 bind_msg.ring_num = 1;
445 bind_msg.param[0].tqp_index = queue_id;
446 op_str = mmap ? "Map" : "Unmap";
447 ret = hns3_send_mbx_msg(hw, code, 0, (uint8_t *)&bind_msg,
448 sizeof(bind_msg), false, NULL, 0);
450 hns3_err(hw, "%s TQP %u fail, vector_id is %u, ret is %d.",
451 op_str, queue_id, bind_msg.vector_id, ret);
457 hns3vf_dev_configure(struct rte_eth_dev *dev)
459 struct hns3_adapter *hns = dev->data->dev_private;
460 struct hns3_hw *hw = &hns->hw;
461 struct rte_eth_conf *conf = &dev->data->dev_conf;
462 enum rte_eth_rx_mq_mode mq_mode = conf->rxmode.mq_mode;
463 uint16_t nb_rx_q = dev->data->nb_rx_queues;
464 uint16_t nb_tx_q = dev->data->nb_tx_queues;
465 struct rte_eth_rss_conf rss_conf;
469 hw->cfg_max_queues = RTE_MAX(nb_rx_q, nb_tx_q);
472 * Some versions of hardware network engine does not support
473 * individually enable/disable/reset the Tx or Rx queue. These devices
474 * must enable/disable/reset Tx and Rx queues at the same time. When the
475 * numbers of Tx queues allocated by upper applications are not equal to
476 * the numbers of Rx queues, driver needs to setup fake Tx or Rx queues
477 * to adjust numbers of Tx/Rx queues. otherwise, network engine can not
478 * work as usual. But these fake queues are imperceptible, and can not
479 * be used by upper applications.
481 ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
483 hns3_err(hw, "fail to set Rx/Tx fake queues, ret = %d.", ret);
484 hw->cfg_max_queues = 0;
488 hw->adapter_state = HNS3_NIC_CONFIGURING;
489 if (conf->link_speeds & RTE_ETH_LINK_SPEED_FIXED) {
490 hns3_err(hw, "setting link speed/duplex not supported");
495 /* When RSS is not configured, redirect the packet queue 0 */
496 if ((uint32_t)mq_mode & RTE_ETH_MQ_RX_RSS_FLAG) {
497 conf->rxmode.offloads |= RTE_ETH_RX_OFFLOAD_RSS_HASH;
498 hw->rss_dis_flag = false;
499 rss_conf = conf->rx_adv_conf.rss_conf;
500 ret = hns3_dev_rss_hash_update(dev, &rss_conf);
505 ret = hns3vf_dev_mtu_set(dev, conf->rxmode.mtu);
509 ret = hns3vf_dev_configure_vlan(dev);
513 /* config hardware GRO */
514 gro_en = conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_TCP_LRO ? true : false;
515 ret = hns3_config_gro(hw, gro_en);
519 hns3_init_rx_ptype_tble(dev);
521 hw->adapter_state = HNS3_NIC_CONFIGURED;
525 hw->cfg_max_queues = 0;
526 (void)hns3_set_fake_rx_or_tx_queues(dev, 0, 0);
527 hw->adapter_state = HNS3_NIC_INITIALIZED;
533 hns3vf_config_mtu(struct hns3_hw *hw, uint16_t mtu)
537 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MTU, 0, (const uint8_t *)&mtu,
538 sizeof(mtu), true, NULL, 0);
540 hns3_err(hw, "Failed to set mtu (%u) for vf: %d", mtu, ret);
546 hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
548 struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
549 uint32_t frame_size = mtu + HNS3_ETH_OVERHEAD;
553 * The hns3 PF/VF devices on the same port share the hardware MTU
554 * configuration. Currently, we send mailbox to inform hns3 PF kernel
555 * ethdev driver to finish hardware MTU configuration in hns3 VF PMD,
556 * there is no need to stop the port for hns3 VF device, and the
557 * MTU value issued by hns3 VF PMD must be less than or equal to
560 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
561 hns3_err(hw, "Failed to set mtu during resetting");
566 * when Rx of scattered packets is off, we have some possibility of
567 * using vector Rx process function or simple Rx functions in hns3 PMD.
568 * If the input MTU is increased and the maximum length of
569 * received packets is greater than the length of a buffer for Rx
570 * packet, the hardware network engine needs to use multiple BDs and
571 * buffers to store these packets. This will cause problems when still
572 * using vector Rx process function or simple Rx function to receiving
573 * packets. So, when Rx of scattered packets is off and device is
574 * started, it is not permitted to increase MTU so that the maximum
575 * length of Rx packets is greater than Rx buffer length.
577 if (dev->data->dev_started && !dev->data->scattered_rx &&
578 frame_size > hw->rx_buf_len) {
579 hns3_err(hw, "failed to set mtu because current is "
580 "not scattered rx mode");
584 rte_spinlock_lock(&hw->lock);
585 ret = hns3vf_config_mtu(hw, mtu);
587 rte_spinlock_unlock(&hw->lock);
590 rte_spinlock_unlock(&hw->lock);
596 hns3vf_clear_event_cause(struct hns3_hw *hw, uint32_t regclr)
598 hns3_write_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG, regclr);
602 hns3vf_disable_irq0(struct hns3_hw *hw)
604 hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 0);
608 hns3vf_enable_irq0(struct hns3_hw *hw)
610 hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 1);
613 static enum hns3vf_evt_cause
614 hns3vf_check_event_cause(struct hns3_adapter *hns, uint32_t *clearval)
616 struct hns3_hw *hw = &hns->hw;
617 enum hns3vf_evt_cause ret;
618 uint32_t cmdq_stat_reg;
619 uint32_t rst_ing_reg;
622 /* Fetch the events from their corresponding regs */
623 cmdq_stat_reg = hns3_read_dev(hw, HNS3_VECTOR0_CMDQ_STAT_REG);
624 if (BIT(HNS3_VECTOR0_RST_INT_B) & cmdq_stat_reg) {
625 rst_ing_reg = hns3_read_dev(hw, HNS3_FUN_RST_ING);
626 hns3_warn(hw, "resetting reg: 0x%x", rst_ing_reg);
627 hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
628 __atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
629 val = hns3_read_dev(hw, HNS3_VF_RST_ING);
630 hns3_write_dev(hw, HNS3_VF_RST_ING, val | HNS3_VF_RST_ING_BIT);
631 val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RST_INT_B);
633 hw->reset.stats.global_cnt++;
634 hns3_warn(hw, "Global reset detected, clear reset status");
636 hns3_schedule_delayed_reset(hns);
637 hns3_warn(hw, "Global reset detected, don't clear reset status");
640 ret = HNS3VF_VECTOR0_EVENT_RST;
644 /* Check for vector0 mailbox(=CMDQ RX) event source */
645 if (BIT(HNS3_VECTOR0_RX_CMDQ_INT_B) & cmdq_stat_reg) {
646 val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RX_CMDQ_INT_B);
647 ret = HNS3VF_VECTOR0_EVENT_MBX;
652 ret = HNS3VF_VECTOR0_EVENT_OTHER;
660 hns3vf_interrupt_handler(void *param)
662 struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
663 struct hns3_adapter *hns = dev->data->dev_private;
664 struct hns3_hw *hw = &hns->hw;
665 enum hns3vf_evt_cause event_cause;
668 /* Disable interrupt */
669 hns3vf_disable_irq0(hw);
671 /* Read out interrupt causes */
672 event_cause = hns3vf_check_event_cause(hns, &clearval);
673 /* Clear interrupt causes */
674 hns3vf_clear_event_cause(hw, clearval);
676 switch (event_cause) {
677 case HNS3VF_VECTOR0_EVENT_RST:
678 hns3_schedule_reset(hns);
680 case HNS3VF_VECTOR0_EVENT_MBX:
681 hns3_dev_handle_mbx_msg(hw);
687 /* Enable interrupt */
688 hns3vf_enable_irq0(hw);
692 hns3vf_set_default_dev_specifications(struct hns3_hw *hw)
694 hw->max_non_tso_bd_num = HNS3_MAX_NON_TSO_BD_PER_PKT;
695 hw->rss_ind_tbl_size = HNS3_RSS_IND_TBL_SIZE;
696 hw->rss_key_size = HNS3_RSS_KEY_SIZE;
697 hw->intr.int_ql_max = HNS3_INTR_QL_NONE;
701 hns3vf_parse_dev_specifications(struct hns3_hw *hw, struct hns3_cmd_desc *desc)
703 struct hns3_dev_specs_0_cmd *req0;
705 req0 = (struct hns3_dev_specs_0_cmd *)desc[0].data;
707 hw->max_non_tso_bd_num = req0->max_non_tso_bd_num;
708 hw->rss_ind_tbl_size = rte_le_to_cpu_16(req0->rss_ind_tbl_size);
709 hw->rss_key_size = rte_le_to_cpu_16(req0->rss_key_size);
710 hw->intr.int_ql_max = rte_le_to_cpu_16(req0->intr_ql_max);
714 hns3vf_check_dev_specifications(struct hns3_hw *hw)
716 if (hw->rss_ind_tbl_size == 0 ||
717 hw->rss_ind_tbl_size > HNS3_RSS_IND_TBL_SIZE_MAX) {
718 hns3_warn(hw, "the size of hash lookup table configured (%u)"
719 " exceeds the maximum(%u)", hw->rss_ind_tbl_size,
720 HNS3_RSS_IND_TBL_SIZE_MAX);
728 hns3vf_query_dev_specifications(struct hns3_hw *hw)
730 struct hns3_cmd_desc desc[HNS3_QUERY_DEV_SPECS_BD_NUM];
734 for (i = 0; i < HNS3_QUERY_DEV_SPECS_BD_NUM - 1; i++) {
735 hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS,
737 desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
739 hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS, true);
741 ret = hns3_cmd_send(hw, desc, HNS3_QUERY_DEV_SPECS_BD_NUM);
745 hns3vf_parse_dev_specifications(hw, desc);
747 return hns3vf_check_dev_specifications(hw);
751 hns3vf_update_push_lsc_cap(struct hns3_hw *hw, bool supported)
753 uint16_t val = supported ? HNS3_PF_PUSH_LSC_CAP_SUPPORTED :
754 HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED;
755 uint16_t exp = HNS3_PF_PUSH_LSC_CAP_UNKNOWN;
756 struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
758 if (vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_UNKNOWN)
759 __atomic_compare_exchange(&vf->pf_push_lsc_cap, &exp, &val, 0,
760 __ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE);
764 hns3vf_get_push_lsc_cap(struct hns3_hw *hw)
766 #define HNS3_CHECK_PUSH_LSC_CAP_TIMEOUT_MS 500
768 struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
769 int32_t remain_ms = HNS3_CHECK_PUSH_LSC_CAP_TIMEOUT_MS;
770 uint16_t val = HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED;
771 uint16_t exp = HNS3_PF_PUSH_LSC_CAP_UNKNOWN;
772 struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
774 __atomic_store_n(&vf->pf_push_lsc_cap, HNS3_PF_PUSH_LSC_CAP_UNKNOWN,
777 (void)hns3_send_mbx_msg(hw, HNS3_MBX_GET_LINK_STATUS, 0, NULL, 0, false,
780 while (remain_ms > 0) {
781 rte_delay_ms(HNS3_POLL_RESPONE_MS);
782 if (__atomic_load_n(&vf->pf_push_lsc_cap, __ATOMIC_ACQUIRE) !=
783 HNS3_PF_PUSH_LSC_CAP_UNKNOWN)
789 * When exit above loop, the pf_push_lsc_cap could be one of the three
790 * state: unknown (means pf not ack), not_supported, supported.
791 * Here config it as 'not_supported' when it's 'unknown' state.
793 __atomic_compare_exchange(&vf->pf_push_lsc_cap, &exp, &val, 0,
794 __ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE);
796 if (__atomic_load_n(&vf->pf_push_lsc_cap, __ATOMIC_ACQUIRE) ==
797 HNS3_PF_PUSH_LSC_CAP_SUPPORTED) {
798 hns3_info(hw, "detect PF support push link status change!");
801 * Framework already set RTE_ETH_DEV_INTR_LSC bit because driver
802 * declared RTE_PCI_DRV_INTR_LSC in drv_flags. So here cleared
803 * the RTE_ETH_DEV_INTR_LSC capability.
805 dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
810 hns3vf_get_capability(struct hns3_hw *hw)
814 ret = hns3_get_pci_revision_id(hw, &hw->revision);
818 if (hw->revision < PCI_REVISION_ID_HIP09_A) {
819 hns3vf_set_default_dev_specifications(hw);
820 hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_RSV_ONE;
821 hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_2US;
822 hw->tso_mode = HNS3_TSO_SW_CAL_PSEUDO_H_CSUM;
823 hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE1;
824 hw->min_tx_pkt_len = HNS3_HIP08_MIN_TX_PKT_LEN;
825 hw->rss_info.ipv6_sctp_offload_supported = false;
826 hw->promisc_mode = HNS3_UNLIMIT_PROMISC_MODE;
830 ret = hns3vf_query_dev_specifications(hw);
833 "failed to query dev specifications, ret = %d",
838 hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_ALL;
839 hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_1US;
840 hw->tso_mode = HNS3_TSO_HW_CAL_PSEUDO_H_CSUM;
841 hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE2;
842 hw->min_tx_pkt_len = HNS3_HIP09_MIN_TX_PKT_LEN;
843 hw->rss_info.ipv6_sctp_offload_supported = true;
844 hw->promisc_mode = HNS3_LIMIT_PROMISC_MODE;
850 hns3vf_check_tqp_info(struct hns3_hw *hw)
852 if (hw->tqps_num == 0) {
853 PMD_INIT_LOG(ERR, "Get invalid tqps_num(0) from PF.");
857 if (hw->rss_size_max == 0) {
858 PMD_INIT_LOG(ERR, "Get invalid rss_size_max(0) from PF.");
862 hw->tqps_num = RTE_MIN(hw->rss_size_max, hw->tqps_num);
868 hns3vf_get_port_base_vlan_filter_state(struct hns3_hw *hw)
873 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN,
874 HNS3_MBX_GET_PORT_BASE_VLAN_STATE, NULL, 0,
875 true, &resp_msg, sizeof(resp_msg));
879 * Getting current port based VLAN state from PF driver
880 * will not affect VF driver's basic function. Because
881 * the VF driver relies on hns3 PF kernel ether driver,
882 * to avoid introducing compatibility issues with older
883 * version of PF driver, no failure will be returned
884 * when the return value is ETIME. This return value has
885 * the following scenarios:
886 * 1) Firmware didn't return the results in time
887 * 2) the result return by firmware is timeout
888 * 3) the older version of kernel side PF driver does
889 * not support this mailbox message.
890 * For scenarios 1 and 2, it is most likely that a
891 * hardware error has occurred, or a hardware reset has
892 * occurred. In this case, these errors will be caught
893 * by other functions.
895 PMD_INIT_LOG(WARNING,
896 "failed to get PVID state for timeout, maybe "
897 "kernel side PF driver doesn't support this "
898 "mailbox message, or firmware didn't respond.");
899 resp_msg = HNS3_PORT_BASE_VLAN_DISABLE;
901 PMD_INIT_LOG(ERR, "failed to get port based VLAN state,"
906 hw->port_base_vlan_cfg.state = resp_msg ?
907 HNS3_PORT_BASE_VLAN_ENABLE : HNS3_PORT_BASE_VLAN_DISABLE;
912 hns3vf_get_queue_info(struct hns3_hw *hw)
914 #define HNS3VF_TQPS_RSS_INFO_LEN 6
915 uint8_t resp_msg[HNS3VF_TQPS_RSS_INFO_LEN];
918 ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_QINFO, 0, NULL, 0, true,
919 resp_msg, HNS3VF_TQPS_RSS_INFO_LEN);
921 PMD_INIT_LOG(ERR, "Failed to get tqp info from PF: %d", ret);
925 memcpy(&hw->tqps_num, &resp_msg[0], sizeof(uint16_t));
926 memcpy(&hw->rss_size_max, &resp_msg[2], sizeof(uint16_t));
928 return hns3vf_check_tqp_info(hw);
932 hns3vf_update_caps(struct hns3_hw *hw, uint32_t caps)
934 if (hns3_get_bit(caps, HNS3VF_CAPS_VLAN_FLT_MOD_B))
935 hns3_set_bit(hw->capability,
936 HNS3_DEV_SUPPORT_VF_VLAN_FLT_MOD_B, 1);
940 hns3vf_get_num_tc(struct hns3_hw *hw)
945 for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
946 if (hw->hw_tc_map & BIT(i))
953 hns3vf_get_basic_info(struct hns3_hw *hw)
955 uint8_t resp_msg[HNS3_MBX_MAX_RESP_DATA_SIZE];
956 struct hns3_basic_info *basic_info;
959 ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_BASIC_INFO, 0, NULL, 0,
960 true, resp_msg, sizeof(resp_msg));
962 hns3_err(hw, "failed to get basic info from PF, ret = %d.",
967 basic_info = (struct hns3_basic_info *)resp_msg;
968 hw->hw_tc_map = basic_info->hw_tc_map;
969 hw->num_tc = hns3vf_get_num_tc(hw);
970 hw->pf_vf_if_version = basic_info->pf_vf_if_version;
971 hns3vf_update_caps(hw, basic_info->caps);
977 hns3vf_get_host_mac_addr(struct hns3_hw *hw)
979 uint8_t host_mac[RTE_ETHER_ADDR_LEN];
982 ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_MAC_ADDR, 0, NULL, 0,
983 true, host_mac, RTE_ETHER_ADDR_LEN);
985 hns3_err(hw, "Failed to get mac addr from PF: %d", ret);
989 memcpy(hw->mac.mac_addr, host_mac, RTE_ETHER_ADDR_LEN);
995 hns3vf_get_configuration(struct hns3_hw *hw)
999 hw->mac.media_type = HNS3_MEDIA_TYPE_NONE;
1000 hw->rss_dis_flag = false;
1002 /* Get device capability */
1003 ret = hns3vf_get_capability(hw);
1005 PMD_INIT_LOG(ERR, "failed to get device capability: %d.", ret);
1009 hns3vf_get_push_lsc_cap(hw);
1011 /* Get basic info from PF */
1012 ret = hns3vf_get_basic_info(hw);
1016 /* Get queue configuration from PF */
1017 ret = hns3vf_get_queue_info(hw);
1021 /* Get user defined VF MAC addr from PF */
1022 ret = hns3vf_get_host_mac_addr(hw);
1026 return hns3vf_get_port_base_vlan_filter_state(hw);
1030 hns3vf_request_link_info(struct hns3_hw *hw)
1032 struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
1036 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
1039 send_req = vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED ||
1040 vf->req_link_info_cnt > 0;
1044 ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_LINK_STATUS, 0, NULL, 0, false,
1047 hns3_err(hw, "failed to fetch link status, ret = %d", ret);
1051 if (vf->req_link_info_cnt > 0)
1052 vf->req_link_info_cnt--;
1056 hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status,
1057 uint32_t link_speed, uint8_t link_duplex)
1059 struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
1060 struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
1061 struct hns3_mac *mac = &hw->mac;
1065 * PF kernel driver may push link status when VF driver is in resetting,
1066 * driver will stop polling job in this case, after resetting done
1067 * driver will start polling job again.
1068 * When polling job started, driver will get initial link status by
1069 * sending request to PF kernel driver, then could update link status by
1070 * process PF kernel driver's link status mailbox message.
1072 if (!__atomic_load_n(&vf->poll_job_started, __ATOMIC_RELAXED))
1075 if (hw->adapter_state != HNS3_NIC_STARTED)
1078 mac->link_status = link_status;
1079 mac->link_speed = link_speed;
1080 mac->link_duplex = link_duplex;
1081 ret = hns3vf_dev_link_update(dev, 0);
1082 if (ret == 0 && dev->data->dev_conf.intr_conf.lsc != 0)
1083 hns3_start_report_lse(dev);
1087 hns3vf_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
1089 #define HNS3VF_VLAN_MBX_MSG_LEN 5
1090 struct hns3_hw *hw = &hns->hw;
1091 uint8_t msg_data[HNS3VF_VLAN_MBX_MSG_LEN];
1092 uint16_t proto = htons(RTE_ETHER_TYPE_VLAN);
1093 uint8_t is_kill = on ? 0 : 1;
1095 msg_data[0] = is_kill;
1096 memcpy(&msg_data[1], &vlan_id, sizeof(vlan_id));
1097 memcpy(&msg_data[3], &proto, sizeof(proto));
1099 return hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN, HNS3_MBX_VLAN_FILTER,
1100 msg_data, HNS3VF_VLAN_MBX_MSG_LEN, true, NULL,
1105 hns3vf_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
1107 struct hns3_adapter *hns = dev->data->dev_private;
1108 struct hns3_hw *hw = &hns->hw;
1111 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
1113 "vf set vlan id failed during resetting, vlan_id =%u",
1117 rte_spinlock_lock(&hw->lock);
1118 ret = hns3vf_vlan_filter_configure(hns, vlan_id, on);
1119 rte_spinlock_unlock(&hw->lock);
1121 hns3_err(hw, "vf set vlan id failed, vlan_id =%u, ret =%d",
1128 hns3vf_en_vlan_filter(struct hns3_hw *hw, bool enable)
1133 if (!hns3_dev_get_support(hw, VF_VLAN_FLT_MOD))
1136 msg_data = enable ? 1 : 0;
1137 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN,
1138 HNS3_MBX_ENABLE_VLAN_FILTER, &msg_data,
1139 sizeof(msg_data), true, NULL, 0);
1141 hns3_err(hw, "%s vlan filter failed, ret = %d.",
1142 enable ? "enable" : "disable", ret);
1148 hns3vf_en_hw_strip_rxvtag(struct hns3_hw *hw, bool enable)
1153 msg_data = enable ? 1 : 0;
1154 ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN, HNS3_MBX_VLAN_RX_OFF_CFG,
1155 &msg_data, sizeof(msg_data), false, NULL, 0);
1157 hns3_err(hw, "vf %s strip failed, ret = %d.",
1158 enable ? "enable" : "disable", ret);
1164 hns3vf_vlan_offload_set(struct rte_eth_dev *dev, int mask)
1166 struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
1167 struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
1168 unsigned int tmp_mask;
1171 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
1172 hns3_err(hw, "vf set vlan offload failed during resetting, "
1173 "mask = 0x%x", mask);
1177 tmp_mask = (unsigned int)mask;
1179 if (tmp_mask & RTE_ETH_VLAN_FILTER_MASK) {
1180 rte_spinlock_lock(&hw->lock);
1181 /* Enable or disable VLAN filter */
1182 if (dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_FILTER)
1183 ret = hns3vf_en_vlan_filter(hw, true);
1185 ret = hns3vf_en_vlan_filter(hw, false);
1186 rte_spinlock_unlock(&hw->lock);
1191 /* Vlan stripping setting */
1192 if (tmp_mask & RTE_ETH_VLAN_STRIP_MASK) {
1193 rte_spinlock_lock(&hw->lock);
1194 /* Enable or disable VLAN stripping */
1195 if (dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
1196 ret = hns3vf_en_hw_strip_rxvtag(hw, true);
1198 ret = hns3vf_en_hw_strip_rxvtag(hw, false);
1199 rte_spinlock_unlock(&hw->lock);
1206 hns3vf_handle_all_vlan_table(struct hns3_adapter *hns, int on)
1208 struct rte_vlan_filter_conf *vfc;
1209 struct hns3_hw *hw = &hns->hw;
1216 vfc = &hw->data->vlan_filter_conf;
1217 for (i = 0; i < RTE_DIM(vfc->ids); i++) {
1218 if (vfc->ids[i] == 0)
1223 * 64 means the num bits of ids, one bit corresponds to
1227 /* count trailing zeroes */
1228 vbit = ~ids & (ids - 1);
1229 /* clear least significant bit set */
1230 ids ^= (ids ^ (ids - 1)) ^ vbit;
1235 ret = hns3vf_vlan_filter_configure(hns, vlan_id, on);
1238 "VF handle vlan table failed, ret =%d, on = %d",
1249 hns3vf_remove_all_vlan_table(struct hns3_adapter *hns)
1251 return hns3vf_handle_all_vlan_table(hns, 0);
1255 hns3vf_restore_vlan_conf(struct hns3_adapter *hns)
1257 struct hns3_hw *hw = &hns->hw;
1258 struct rte_eth_conf *dev_conf;
1262 dev_conf = &hw->data->dev_conf;
1263 en = dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP ? true
1265 ret = hns3vf_en_hw_strip_rxvtag(hw, en);
1267 hns3_err(hw, "VF restore vlan conf fail, en =%d, ret =%d", en,
1273 hns3vf_dev_configure_vlan(struct rte_eth_dev *dev)
1275 struct hns3_adapter *hns = dev->data->dev_private;
1276 struct rte_eth_dev_data *data = dev->data;
1277 struct hns3_hw *hw = &hns->hw;
1280 if (data->dev_conf.txmode.hw_vlan_reject_tagged ||
1281 data->dev_conf.txmode.hw_vlan_reject_untagged ||
1282 data->dev_conf.txmode.hw_vlan_insert_pvid) {
1283 hns3_warn(hw, "hw_vlan_reject_tagged, hw_vlan_reject_untagged "
1284 "or hw_vlan_insert_pvid is not support!");
1287 /* Apply vlan offload setting */
1288 ret = hns3vf_vlan_offload_set(dev, RTE_ETH_VLAN_STRIP_MASK |
1289 RTE_ETH_VLAN_FILTER_MASK);
1291 hns3_err(hw, "dev config vlan offload failed, ret = %d.", ret);
1297 hns3vf_set_alive(struct hns3_hw *hw, bool alive)
1301 msg_data = alive ? 1 : 0;
1302 return hns3_send_mbx_msg(hw, HNS3_MBX_SET_ALIVE, 0, &msg_data,
1303 sizeof(msg_data), false, NULL, 0);
1307 hns3vf_keep_alive_handler(void *param)
1309 struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
1310 struct hns3_adapter *hns = eth_dev->data->dev_private;
1311 struct hns3_hw *hw = &hns->hw;
1314 ret = hns3_send_mbx_msg(hw, HNS3_MBX_KEEP_ALIVE, 0, NULL, 0,
1317 hns3_err(hw, "VF sends keeping alive cmd failed(=%d)",
1320 rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
1325 hns3vf_service_handler(void *param)
1327 struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
1328 struct hns3_adapter *hns = eth_dev->data->dev_private;
1329 struct hns3_hw *hw = &hns->hw;
1332 * The query link status and reset processing are executed in the
1333 * interrupt thread. When the IMP reset occurs, IMP will not respond,
1334 * and the query operation will timeout after 30ms. In the case of
1335 * multiple PF/VFs, each query failure timeout causes the IMP reset
1336 * interrupt to fail to respond within 100ms.
1337 * Before querying the link status, check whether there is a reset
1338 * pending, and if so, abandon the query.
1340 if (!hns3vf_is_reset_pending(hns))
1341 hns3vf_request_link_info(hw);
1343 hns3_warn(hw, "Cancel the query when reset is pending");
1345 rte_eal_alarm_set(HNS3VF_SERVICE_INTERVAL, hns3vf_service_handler,
1350 hns3vf_start_poll_job(struct rte_eth_dev *dev)
1352 #define HNS3_REQUEST_LINK_INFO_REMAINS_CNT 3
1354 struct hns3_vf *vf = HNS3_DEV_PRIVATE_TO_VF(dev->data->dev_private);
1356 if (vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_SUPPORTED)
1357 vf->req_link_info_cnt = HNS3_REQUEST_LINK_INFO_REMAINS_CNT;
1359 __atomic_store_n(&vf->poll_job_started, 1, __ATOMIC_RELAXED);
1361 hns3vf_service_handler(dev);
1365 hns3vf_stop_poll_job(struct rte_eth_dev *dev)
1367 struct hns3_vf *vf = HNS3_DEV_PRIVATE_TO_VF(dev->data->dev_private);
1369 rte_eal_alarm_cancel(hns3vf_service_handler, dev);
1371 __atomic_store_n(&vf->poll_job_started, 0, __ATOMIC_RELAXED);
1375 hns3_query_vf_resource(struct hns3_hw *hw)
1377 struct hns3_vf_res_cmd *req;
1378 struct hns3_cmd_desc desc;
1382 hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_VF_RSRC, true);
1383 ret = hns3_cmd_send(hw, &desc, 1);
1385 hns3_err(hw, "query vf resource failed, ret = %d", ret);
1389 req = (struct hns3_vf_res_cmd *)desc.data;
1390 num_msi = hns3_get_field(rte_le_to_cpu_16(req->vf_intr_vector_number),
1391 HNS3_VF_VEC_NUM_M, HNS3_VF_VEC_NUM_S);
1392 if (num_msi < HNS3_MIN_VECTOR_NUM) {
1393 hns3_err(hw, "Just %u msi resources, not enough for vf(min:%d)",
1394 num_msi, HNS3_MIN_VECTOR_NUM);
1398 hw->num_msi = num_msi;
1404 hns3vf_init_hardware(struct hns3_adapter *hns)
1406 struct hns3_hw *hw = &hns->hw;
1407 uint16_t mtu = hw->data->mtu;
1410 ret = hns3vf_set_promisc_mode(hw, true, false, false);
1414 ret = hns3vf_config_mtu(hw, mtu);
1416 goto err_init_hardware;
1418 ret = hns3vf_vlan_filter_configure(hns, 0, 1);
1420 PMD_INIT_LOG(ERR, "Failed to initialize VLAN config: %d", ret);
1421 goto err_init_hardware;
1424 ret = hns3_config_gro(hw, false);
1426 PMD_INIT_LOG(ERR, "Failed to config gro: %d", ret);
1427 goto err_init_hardware;
1431 * In the initialization clearing the all hardware mapping relationship
1432 * configurations between queues and interrupt vectors is needed, so
1433 * some error caused by the residual configurations, such as the
1434 * unexpected interrupt, can be avoid.
1436 ret = hns3_init_ring_with_vector(hw);
1438 PMD_INIT_LOG(ERR, "Failed to init ring intr vector: %d", ret);
1439 goto err_init_hardware;
1445 (void)hns3vf_set_promisc_mode(hw, false, false, false);
1450 hns3vf_clear_vport_list(struct hns3_hw *hw)
1452 return hns3_send_mbx_msg(hw, HNS3_MBX_HANDLE_VF_TBL,
1453 HNS3_MBX_VPORT_LIST_CLEAR, NULL, 0, false,
1458 hns3vf_init_vf(struct rte_eth_dev *eth_dev)
1460 struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
1461 struct hns3_adapter *hns = eth_dev->data->dev_private;
1462 struct hns3_hw *hw = &hns->hw;
1465 PMD_INIT_FUNC_TRACE();
1467 /* Get hardware io base address from pcie BAR2 IO space */
1468 hw->io_base = pci_dev->mem_resource[2].addr;
1470 /* Firmware command queue initialize */
1471 ret = hns3_cmd_init_queue(hw);
1473 PMD_INIT_LOG(ERR, "Failed to init cmd queue: %d", ret);
1474 goto err_cmd_init_queue;
1477 /* Firmware command initialize */
1478 ret = hns3_cmd_init(hw);
1480 PMD_INIT_LOG(ERR, "Failed to init cmd: %d", ret);
1484 hns3_tx_push_init(eth_dev);
1486 /* Get VF resource */
1487 ret = hns3_query_vf_resource(hw);
1491 rte_spinlock_init(&hw->mbx_resp.lock);
1493 hns3vf_clear_event_cause(hw, 0);
1495 ret = rte_intr_callback_register(pci_dev->intr_handle,
1496 hns3vf_interrupt_handler, eth_dev);
1498 PMD_INIT_LOG(ERR, "Failed to register intr: %d", ret);
1499 goto err_intr_callback_register;
1502 /* Enable interrupt */
1503 rte_intr_enable(pci_dev->intr_handle);
1504 hns3vf_enable_irq0(hw);
1506 /* Get configuration from PF */
1507 ret = hns3vf_get_configuration(hw);
1509 PMD_INIT_LOG(ERR, "Failed to fetch configuration: %d", ret);
1510 goto err_get_config;
1513 ret = hns3_stats_init(hw);
1515 goto err_get_config;
1517 ret = hns3_queue_to_tc_mapping(hw, hw->tqps_num, hw->tqps_num);
1519 PMD_INIT_LOG(ERR, "failed to set tc info, ret = %d.", ret);
1520 goto err_set_tc_queue;
1523 ret = hns3vf_clear_vport_list(hw);
1525 PMD_INIT_LOG(ERR, "Failed to clear tbl list: %d", ret);
1526 goto err_set_tc_queue;
1529 ret = hns3vf_init_hardware(hns);
1531 goto err_set_tc_queue;
1533 hns3_rss_set_default_args(hw);
1535 ret = hns3vf_set_alive(hw, true);
1537 PMD_INIT_LOG(ERR, "Failed to VF send alive to PF: %d", ret);
1538 goto err_set_tc_queue;
1544 hns3_stats_uninit(hw);
1547 hns3vf_disable_irq0(hw);
1548 rte_intr_disable(pci_dev->intr_handle);
1549 hns3_intr_unregister(pci_dev->intr_handle, hns3vf_interrupt_handler,
1551 err_intr_callback_register:
1553 hns3_cmd_uninit(hw);
1554 hns3_cmd_destroy_queue(hw);
1562 hns3vf_uninit_vf(struct rte_eth_dev *eth_dev)
1564 struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
1565 struct hns3_adapter *hns = eth_dev->data->dev_private;
1566 struct hns3_hw *hw = &hns->hw;
1568 PMD_INIT_FUNC_TRACE();
1570 hns3_rss_uninit(hns);
1571 (void)hns3_config_gro(hw, false);
1572 (void)hns3vf_set_alive(hw, false);
1573 (void)hns3vf_set_promisc_mode(hw, false, false, false);
1574 hns3_flow_uninit(eth_dev);
1575 hns3_stats_uninit(hw);
1576 hns3vf_disable_irq0(hw);
1577 rte_intr_disable(pci_dev->intr_handle);
1578 hns3_intr_unregister(pci_dev->intr_handle, hns3vf_interrupt_handler,
1580 hns3_cmd_uninit(hw);
1581 hns3_cmd_destroy_queue(hw);
1586 hns3vf_do_stop(struct hns3_adapter *hns)
1588 struct hns3_hw *hw = &hns->hw;
1591 hw->mac.link_status = RTE_ETH_LINK_DOWN;
1594 * The "hns3vf_do_stop" function will also be called by .stop_service to
1595 * prepare reset. At the time of global or IMP reset, the command cannot
1596 * be sent to stop the tx/rx queues. The mbuf in Tx/Rx queues may be
1597 * accessed during the reset process. So the mbuf can not be released
1598 * during reset and is required to be released after the reset is
1601 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0)
1602 hns3_dev_release_mbufs(hns);
1604 if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0) {
1605 hns3_configure_all_mac_addr(hns, true);
1606 ret = hns3_reset_all_tqps(hns);
1608 hns3_err(hw, "failed to reset all queues ret = %d",
1617 hns3vf_dev_stop(struct rte_eth_dev *dev)
1619 struct hns3_adapter *hns = dev->data->dev_private;
1620 struct hns3_hw *hw = &hns->hw;
1622 PMD_INIT_FUNC_TRACE();
1623 dev->data->dev_started = 0;
1625 hw->adapter_state = HNS3_NIC_STOPPING;
1626 hns3_set_rxtx_function(dev);
1628 /* Disable datapath on secondary process. */
1629 hns3_mp_req_stop_rxtx(dev);
1630 /* Prevent crashes when queues are still in use. */
1631 rte_delay_ms(hw->cfg_max_queues);
1633 rte_spinlock_lock(&hw->lock);
1634 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
1636 hns3vf_do_stop(hns);
1637 hns3_unmap_rx_interrupt(dev);
1638 hw->adapter_state = HNS3_NIC_CONFIGURED;
1640 hns3_rx_scattered_reset(dev);
1641 hns3vf_stop_poll_job(dev);
1642 hns3_stop_report_lse(dev);
1643 rte_spinlock_unlock(&hw->lock);
1649 hns3vf_dev_close(struct rte_eth_dev *eth_dev)
1651 struct hns3_adapter *hns = eth_dev->data->dev_private;
1652 struct hns3_hw *hw = &hns->hw;
1655 if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
1656 hns3_mp_uninit(eth_dev);
1660 if (hw->adapter_state == HNS3_NIC_STARTED)
1661 ret = hns3vf_dev_stop(eth_dev);
1663 hw->adapter_state = HNS3_NIC_CLOSING;
1664 hns3_reset_abort(hns);
1665 hw->adapter_state = HNS3_NIC_CLOSED;
1666 rte_eal_alarm_cancel(hns3vf_keep_alive_handler, eth_dev);
1667 hns3_configure_all_mc_mac_addr(hns, true);
1668 hns3vf_remove_all_vlan_table(hns);
1669 hns3vf_uninit_vf(eth_dev);
1670 hns3_free_all_queues(eth_dev);
1671 rte_free(hw->reset.wait_data);
1672 hns3_mp_uninit(eth_dev);
1673 hns3_warn(hw, "Close port %u finished", hw->data->port_id);
1679 hns3vf_dev_link_update(struct rte_eth_dev *eth_dev,
1680 __rte_unused int wait_to_complete)
1682 struct hns3_adapter *hns = eth_dev->data->dev_private;
1683 struct hns3_hw *hw = &hns->hw;
1684 struct hns3_mac *mac = &hw->mac;
1685 struct rte_eth_link new_link;
1687 memset(&new_link, 0, sizeof(new_link));
1688 switch (mac->link_speed) {
1689 case RTE_ETH_SPEED_NUM_10M:
1690 case RTE_ETH_SPEED_NUM_100M:
1691 case RTE_ETH_SPEED_NUM_1G:
1692 case RTE_ETH_SPEED_NUM_10G:
1693 case RTE_ETH_SPEED_NUM_25G:
1694 case RTE_ETH_SPEED_NUM_40G:
1695 case RTE_ETH_SPEED_NUM_50G:
1696 case RTE_ETH_SPEED_NUM_100G:
1697 case RTE_ETH_SPEED_NUM_200G:
1698 if (mac->link_status)
1699 new_link.link_speed = mac->link_speed;
1702 if (mac->link_status)
1703 new_link.link_speed = RTE_ETH_SPEED_NUM_UNKNOWN;
1707 if (!mac->link_status)
1708 new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
1710 new_link.link_duplex = mac->link_duplex;
1711 new_link.link_status = mac->link_status ? RTE_ETH_LINK_UP : RTE_ETH_LINK_DOWN;
1712 new_link.link_autoneg =
1713 !(eth_dev->data->dev_conf.link_speeds & RTE_ETH_LINK_SPEED_FIXED);
1715 return rte_eth_linkstatus_set(eth_dev, &new_link);
1719 hns3vf_do_start(struct hns3_adapter *hns, bool reset_queue)
1721 struct hns3_hw *hw = &hns->hw;
1722 uint16_t nb_rx_q = hw->data->nb_rx_queues;
1723 uint16_t nb_tx_q = hw->data->nb_tx_queues;
1726 ret = hns3_queue_to_tc_mapping(hw, nb_rx_q, nb_tx_q);
1730 hns3_enable_rxd_adv_layout(hw);
1732 ret = hns3_init_queues(hns, reset_queue);
1734 hns3_err(hw, "failed to init queues, ret = %d.", ret);
1740 hns3vf_restore_filter(struct rte_eth_dev *dev)
1742 hns3_restore_rss_filter(dev);
1746 hns3vf_dev_start(struct rte_eth_dev *dev)
1748 struct hns3_adapter *hns = dev->data->dev_private;
1749 struct hns3_hw *hw = &hns->hw;
1752 PMD_INIT_FUNC_TRACE();
1753 if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
1756 rte_spinlock_lock(&hw->lock);
1757 hw->adapter_state = HNS3_NIC_STARTING;
1758 ret = hns3vf_do_start(hns, true);
1760 hw->adapter_state = HNS3_NIC_CONFIGURED;
1761 rte_spinlock_unlock(&hw->lock);
1764 ret = hns3_map_rx_interrupt(dev);
1766 goto map_rx_inter_err;
1769 * There are three register used to control the status of a TQP
1770 * (contains a pair of Tx queue and Rx queue) in the new version network
1771 * engine. One is used to control the enabling of Tx queue, the other is
1772 * used to control the enabling of Rx queue, and the last is the master
1773 * switch used to control the enabling of the tqp. The Tx register and
1774 * TQP register must be enabled at the same time to enable a Tx queue.
1775 * The same applies to the Rx queue. For the older network enginem, this
1776 * function only refresh the enabled flag, and it is used to update the
1777 * status of queue in the dpdk framework.
1779 ret = hns3_start_all_txqs(dev);
1781 goto map_rx_inter_err;
1783 ret = hns3_start_all_rxqs(dev);
1785 goto start_all_rxqs_fail;
1787 hw->adapter_state = HNS3_NIC_STARTED;
1788 rte_spinlock_unlock(&hw->lock);
1790 hns3_rx_scattered_calc(dev);
1791 hns3_set_rxtx_function(dev);
1792 hns3_mp_req_start_rxtx(dev);
1794 hns3vf_restore_filter(dev);
1796 /* Enable interrupt of all rx queues before enabling queues */
1797 hns3_dev_all_rx_queue_intr_enable(hw, true);
1798 hns3_start_tqps(hw);
1800 if (dev->data->dev_conf.intr_conf.lsc != 0)
1801 hns3vf_dev_link_update(dev, 0);
1802 hns3vf_start_poll_job(dev);
1806 start_all_rxqs_fail:
1807 hns3_stop_all_txqs(dev);
1809 (void)hns3vf_do_stop(hns);
1810 hw->adapter_state = HNS3_NIC_CONFIGURED;
1811 rte_spinlock_unlock(&hw->lock);
1817 is_vf_reset_done(struct hns3_hw *hw)
1819 #define HNS3_FUN_RST_ING_BITS \
1820 (BIT(HNS3_VECTOR0_GLOBALRESET_INT_B) | \
1821 BIT(HNS3_VECTOR0_CORERESET_INT_B) | \
1822 BIT(HNS3_VECTOR0_IMPRESET_INT_B) | \
1823 BIT(HNS3_VECTOR0_FUNCRESET_INT_B))
1827 if (hw->reset.level == HNS3_VF_RESET) {
1828 val = hns3_read_dev(hw, HNS3_VF_RST_ING);
1829 if (val & HNS3_VF_RST_ING_BIT)
1832 val = hns3_read_dev(hw, HNS3_FUN_RST_ING);
1833 if (val & HNS3_FUN_RST_ING_BITS)
1840 hns3vf_is_reset_pending(struct hns3_adapter *hns)
1842 struct hns3_hw *hw = &hns->hw;
1843 enum hns3_reset_level reset;
1846 * According to the protocol of PCIe, FLR to a PF device resets the PF
1847 * state as well as the SR-IOV extended capability including VF Enable
1848 * which means that VFs no longer exist.
1850 * HNS3_VF_FULL_RESET means PF device is in FLR reset. when PF device
1851 * is in FLR stage, the register state of VF device is not reliable,
1852 * so register states detection can not be carried out. In this case,
1853 * we just ignore the register states and return false to indicate that
1854 * there are no other reset states that need to be processed by driver.
1856 if (hw->reset.level == HNS3_VF_FULL_RESET)
1859 /* Check the registers to confirm whether there is reset pending */
1860 hns3vf_check_event_cause(hns, NULL);
1861 reset = hns3vf_get_reset_level(hw, &hw->reset.pending);
1862 if (hw->reset.level != HNS3_NONE_RESET && reset != HNS3_NONE_RESET &&
1863 hw->reset.level < reset) {
1864 hns3_warn(hw, "High level reset %d is pending", reset);
1871 hns3vf_wait_hardware_ready(struct hns3_adapter *hns)
1873 #define HNS3_WAIT_PF_RESET_READY_TIME 5
1874 struct hns3_hw *hw = &hns->hw;
1875 struct hns3_wait_data *wait_data = hw->reset.wait_data;
1878 if (wait_data->result == HNS3_WAIT_SUCCESS) {
1880 * After vf reset is ready, the PF may not have completed
1881 * the reset processing. The vf sending mbox to PF may fail
1882 * during the pf reset, so it is better to add extra delay.
1884 if (hw->reset.level == HNS3_VF_FUNC_RESET ||
1885 hw->reset.level == HNS3_FLR_RESET)
1887 /* Reset retry process, no need to add extra delay. */
1888 if (hw->reset.attempts)
1890 if (wait_data->check_completion == NULL)
1893 wait_data->check_completion = NULL;
1894 wait_data->interval = HNS3_WAIT_PF_RESET_READY_TIME *
1895 MSEC_PER_SEC * USEC_PER_MSEC;
1896 wait_data->count = 1;
1897 wait_data->result = HNS3_WAIT_REQUEST;
1898 rte_eal_alarm_set(wait_data->interval, hns3_wait_callback,
1900 hns3_warn(hw, "hardware is ready, delay %d sec for PF reset complete",
1901 HNS3_WAIT_PF_RESET_READY_TIME);
1903 } else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
1904 hns3_clock_gettime(&tv);
1905 hns3_warn(hw, "Reset step4 hardware not ready after reset time=%ld.%.6ld",
1906 tv.tv_sec, tv.tv_usec);
1908 } else if (wait_data->result == HNS3_WAIT_REQUEST)
1911 wait_data->hns = hns;
1912 wait_data->check_completion = is_vf_reset_done;
1913 wait_data->end_ms = (uint64_t)HNS3VF_RESET_WAIT_CNT *
1914 HNS3VF_RESET_WAIT_MS + hns3_clock_gettime_ms();
1915 wait_data->interval = HNS3VF_RESET_WAIT_MS * USEC_PER_MSEC;
1916 wait_data->count = HNS3VF_RESET_WAIT_CNT;
1917 wait_data->result = HNS3_WAIT_REQUEST;
1918 rte_eal_alarm_set(wait_data->interval, hns3_wait_callback, wait_data);
1923 hns3vf_prepare_reset(struct hns3_adapter *hns)
1925 struct hns3_hw *hw = &hns->hw;
1928 if (hw->reset.level == HNS3_VF_FUNC_RESET) {
1929 ret = hns3_send_mbx_msg(hw, HNS3_MBX_RESET, 0, NULL,
1934 __atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
1940 hns3vf_stop_service(struct hns3_adapter *hns)
1942 struct hns3_hw *hw = &hns->hw;
1943 struct rte_eth_dev *eth_dev;
1945 eth_dev = &rte_eth_devices[hw->data->port_id];
1946 if (hw->adapter_state == HNS3_NIC_STARTED) {
1948 * Make sure call update link status before hns3vf_stop_poll_job
1949 * because update link status depend on polling job exist.
1951 hns3vf_update_link_status(hw, RTE_ETH_LINK_DOWN, hw->mac.link_speed,
1952 hw->mac.link_duplex);
1953 hns3vf_stop_poll_job(eth_dev);
1955 hw->mac.link_status = RTE_ETH_LINK_DOWN;
1957 hns3_set_rxtx_function(eth_dev);
1959 /* Disable datapath on secondary process. */
1960 hns3_mp_req_stop_rxtx(eth_dev);
1961 rte_delay_ms(hw->cfg_max_queues);
1963 rte_spinlock_lock(&hw->lock);
1964 if (hw->adapter_state == HNS3_NIC_STARTED ||
1965 hw->adapter_state == HNS3_NIC_STOPPING) {
1966 hns3_enable_all_queues(hw, false);
1967 hns3vf_do_stop(hns);
1968 hw->reset.mbuf_deferred_free = true;
1970 hw->reset.mbuf_deferred_free = false;
1973 * It is cumbersome for hardware to pick-and-choose entries for deletion
1974 * from table space. Hence, for function reset software intervention is
1975 * required to delete the entries.
1977 if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0)
1978 hns3_configure_all_mc_mac_addr(hns, true);
1979 rte_spinlock_unlock(&hw->lock);
1985 hns3vf_start_service(struct hns3_adapter *hns)
1987 struct hns3_hw *hw = &hns->hw;
1988 struct rte_eth_dev *eth_dev;
1990 eth_dev = &rte_eth_devices[hw->data->port_id];
1991 hns3_set_rxtx_function(eth_dev);
1992 hns3_mp_req_start_rxtx(eth_dev);
1993 if (hw->adapter_state == HNS3_NIC_STARTED) {
1994 hns3vf_start_poll_job(eth_dev);
1996 /* Enable interrupt of all rx queues before enabling queues */
1997 hns3_dev_all_rx_queue_intr_enable(hw, true);
1999 * Enable state of each rxq and txq will be recovered after
2000 * reset, so we need to restore them before enable all tqps;
2002 hns3_restore_tqp_enable_state(hw);
2004 * When finished the initialization, enable queues to receive
2005 * and transmit packets.
2007 hns3_enable_all_queues(hw, true);
2014 hns3vf_check_default_mac_change(struct hns3_hw *hw)
2016 char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
2017 struct rte_ether_addr *hw_mac;
2021 * The hns3 PF ethdev driver in kernel support setting VF MAC address
2022 * on the host by "ip link set ..." command. If the hns3 PF kernel
2023 * ethdev driver sets the MAC address for VF device after the
2024 * initialization of the related VF device, the PF driver will notify
2025 * VF driver to reset VF device to make the new MAC address effective
2026 * immediately. The hns3 VF PMD should check whether the MAC
2027 * address has been changed by the PF kernel ethdev driver, if changed
2028 * VF driver should configure hardware using the new MAC address in the
2029 * recovering hardware configuration stage of the reset process.
2031 ret = hns3vf_get_host_mac_addr(hw);
2035 hw_mac = (struct rte_ether_addr *)hw->mac.mac_addr;
2036 ret = rte_is_zero_ether_addr(hw_mac);
2038 rte_ether_addr_copy(&hw->data->mac_addrs[0], hw_mac);
2040 ret = rte_is_same_ether_addr(&hw->data->mac_addrs[0], hw_mac);
2042 rte_ether_addr_copy(hw_mac, &hw->data->mac_addrs[0]);
2043 hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
2044 &hw->data->mac_addrs[0]);
2045 hns3_warn(hw, "Default MAC address has been changed to:"
2046 " %s by the host PF kernel ethdev driver",
2055 hns3vf_restore_conf(struct hns3_adapter *hns)
2057 struct hns3_hw *hw = &hns->hw;
2060 ret = hns3vf_check_default_mac_change(hw);
2064 ret = hns3_configure_all_mac_addr(hns, false);
2068 ret = hns3_configure_all_mc_mac_addr(hns, false);
2072 ret = hns3vf_restore_promisc(hns);
2074 goto err_vlan_table;
2076 ret = hns3vf_restore_vlan_conf(hns);
2078 goto err_vlan_table;
2080 ret = hns3vf_get_port_base_vlan_filter_state(hw);
2082 goto err_vlan_table;
2084 ret = hns3_restore_rx_interrupt(hw);
2086 goto err_vlan_table;
2088 ret = hns3_restore_gro_conf(hw);
2090 goto err_vlan_table;
2092 if (hw->adapter_state == HNS3_NIC_STARTED) {
2093 ret = hns3vf_do_start(hns, false);
2095 goto err_vlan_table;
2096 hns3_info(hw, "hns3vf dev restart successful!");
2097 } else if (hw->adapter_state == HNS3_NIC_STOPPING)
2098 hw->adapter_state = HNS3_NIC_CONFIGURED;
2100 ret = hns3vf_set_alive(hw, true);
2102 hns3_err(hw, "failed to VF send alive to PF: %d", ret);
2103 goto err_vlan_table;
2109 hns3_configure_all_mc_mac_addr(hns, true);
2111 hns3_configure_all_mac_addr(hns, true);
2115 static enum hns3_reset_level
2116 hns3vf_get_reset_level(struct hns3_hw *hw, uint64_t *levels)
2118 enum hns3_reset_level reset_level;
2120 /* return the highest priority reset level amongst all */
2121 if (hns3_atomic_test_bit(HNS3_VF_RESET, levels))
2122 reset_level = HNS3_VF_RESET;
2123 else if (hns3_atomic_test_bit(HNS3_VF_FULL_RESET, levels))
2124 reset_level = HNS3_VF_FULL_RESET;
2125 else if (hns3_atomic_test_bit(HNS3_VF_PF_FUNC_RESET, levels))
2126 reset_level = HNS3_VF_PF_FUNC_RESET;
2127 else if (hns3_atomic_test_bit(HNS3_VF_FUNC_RESET, levels))
2128 reset_level = HNS3_VF_FUNC_RESET;
2129 else if (hns3_atomic_test_bit(HNS3_FLR_RESET, levels))
2130 reset_level = HNS3_FLR_RESET;
2132 reset_level = HNS3_NONE_RESET;
2134 if (hw->reset.level != HNS3_NONE_RESET && reset_level < hw->reset.level)
2135 return HNS3_NONE_RESET;
2141 hns3vf_reset_service(void *param)
2143 struct hns3_adapter *hns = (struct hns3_adapter *)param;
2144 struct hns3_hw *hw = &hns->hw;
2145 enum hns3_reset_level reset_level;
2146 struct timeval tv_delta;
2147 struct timeval tv_start;
2152 * The interrupt is not triggered within the delay time.
2153 * The interrupt may have been lost. It is necessary to handle
2154 * the interrupt to recover from the error.
2156 if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
2157 SCHEDULE_DEFERRED) {
2158 __atomic_store_n(&hw->reset.schedule, SCHEDULE_REQUESTED,
2160 hns3_err(hw, "Handling interrupts in delayed tasks");
2161 hns3vf_interrupt_handler(&rte_eth_devices[hw->data->port_id]);
2162 reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
2163 if (reset_level == HNS3_NONE_RESET) {
2164 hns3_err(hw, "No reset level is set, try global reset");
2165 hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
2168 __atomic_store_n(&hw->reset.schedule, SCHEDULE_NONE, __ATOMIC_RELAXED);
2171 * Hardware reset has been notified, we now have to poll & check if
2172 * hardware has actually completed the reset sequence.
2174 reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
2175 if (reset_level != HNS3_NONE_RESET) {
2176 hns3_clock_gettime(&tv_start);
2177 hns3_reset_process(hns, reset_level);
2178 hns3_clock_gettime(&tv);
2179 timersub(&tv, &tv_start, &tv_delta);
2180 msec = hns3_clock_calctime_ms(&tv_delta);
2181 if (msec > HNS3_RESET_PROCESS_MS)
2182 hns3_err(hw, "%d handle long time delta %" PRIu64
2183 " ms time=%ld.%.6ld",
2184 hw->reset.level, msec, tv.tv_sec, tv.tv_usec);
2189 hns3vf_reinit_dev(struct hns3_adapter *hns)
2191 struct rte_eth_dev *eth_dev = &rte_eth_devices[hns->hw.data->port_id];
2192 struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
2193 struct hns3_hw *hw = &hns->hw;
2196 if (hw->reset.level == HNS3_VF_FULL_RESET) {
2197 rte_intr_disable(pci_dev->intr_handle);
2198 ret = hns3vf_set_bus_master(pci_dev, true);
2200 hns3_err(hw, "failed to set pci bus, ret = %d", ret);
2205 /* Firmware command initialize */
2206 ret = hns3_cmd_init(hw);
2208 hns3_err(hw, "Failed to init cmd: %d", ret);
2212 if (hw->reset.level == HNS3_VF_FULL_RESET) {
2214 * UIO enables msix by writing the pcie configuration space
2215 * vfio_pci enables msix in rte_intr_enable.
2217 if (pci_dev->kdrv == RTE_PCI_KDRV_IGB_UIO ||
2218 pci_dev->kdrv == RTE_PCI_KDRV_UIO_GENERIC) {
2219 if (hns3vf_enable_msix(pci_dev, true))
2220 hns3_err(hw, "Failed to enable msix");
2223 rte_intr_enable(pci_dev->intr_handle);
2226 ret = hns3_reset_all_tqps(hns);
2228 hns3_err(hw, "Failed to reset all queues: %d", ret);
2232 ret = hns3vf_init_hardware(hns);
2234 hns3_err(hw, "Failed to init hardware: %d", ret);
2241 static const struct eth_dev_ops hns3vf_eth_dev_ops = {
2242 .dev_configure = hns3vf_dev_configure,
2243 .dev_start = hns3vf_dev_start,
2244 .dev_stop = hns3vf_dev_stop,
2245 .dev_close = hns3vf_dev_close,
2246 .mtu_set = hns3vf_dev_mtu_set,
2247 .promiscuous_enable = hns3vf_dev_promiscuous_enable,
2248 .promiscuous_disable = hns3vf_dev_promiscuous_disable,
2249 .allmulticast_enable = hns3vf_dev_allmulticast_enable,
2250 .allmulticast_disable = hns3vf_dev_allmulticast_disable,
2251 .stats_get = hns3_stats_get,
2252 .stats_reset = hns3_stats_reset,
2253 .xstats_get = hns3_dev_xstats_get,
2254 .xstats_get_names = hns3_dev_xstats_get_names,
2255 .xstats_reset = hns3_dev_xstats_reset,
2256 .xstats_get_by_id = hns3_dev_xstats_get_by_id,
2257 .xstats_get_names_by_id = hns3_dev_xstats_get_names_by_id,
2258 .dev_infos_get = hns3_dev_infos_get,
2259 .fw_version_get = hns3_fw_version_get,
2260 .rx_queue_setup = hns3_rx_queue_setup,
2261 .tx_queue_setup = hns3_tx_queue_setup,
2262 .rx_queue_release = hns3_dev_rx_queue_release,
2263 .tx_queue_release = hns3_dev_tx_queue_release,
2264 .rx_queue_start = hns3_dev_rx_queue_start,
2265 .rx_queue_stop = hns3_dev_rx_queue_stop,
2266 .tx_queue_start = hns3_dev_tx_queue_start,
2267 .tx_queue_stop = hns3_dev_tx_queue_stop,
2268 .rx_queue_intr_enable = hns3_dev_rx_queue_intr_enable,
2269 .rx_queue_intr_disable = hns3_dev_rx_queue_intr_disable,
2270 .rxq_info_get = hns3_rxq_info_get,
2271 .txq_info_get = hns3_txq_info_get,
2272 .rx_burst_mode_get = hns3_rx_burst_mode_get,
2273 .tx_burst_mode_get = hns3_tx_burst_mode_get,
2274 .mac_addr_add = hns3_add_mac_addr,
2275 .mac_addr_remove = hns3_remove_mac_addr,
2276 .mac_addr_set = hns3vf_set_default_mac_addr,
2277 .set_mc_addr_list = hns3_set_mc_mac_addr_list,
2278 .link_update = hns3vf_dev_link_update,
2279 .rss_hash_update = hns3_dev_rss_hash_update,
2280 .rss_hash_conf_get = hns3_dev_rss_hash_conf_get,
2281 .reta_update = hns3_dev_rss_reta_update,
2282 .reta_query = hns3_dev_rss_reta_query,
2283 .flow_ops_get = hns3_dev_flow_ops_get,
2284 .vlan_filter_set = hns3vf_vlan_filter_set,
2285 .vlan_offload_set = hns3vf_vlan_offload_set,
2286 .get_reg = hns3_get_regs,
2287 .dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
2288 .tx_done_cleanup = hns3_tx_done_cleanup,
2289 .eth_dev_priv_dump = hns3_eth_dev_priv_dump,
2292 static const struct hns3_reset_ops hns3vf_reset_ops = {
2293 .reset_service = hns3vf_reset_service,
2294 .stop_service = hns3vf_stop_service,
2295 .prepare_reset = hns3vf_prepare_reset,
2296 .wait_hardware_ready = hns3vf_wait_hardware_ready,
2297 .reinit_dev = hns3vf_reinit_dev,
2298 .restore_conf = hns3vf_restore_conf,
2299 .start_service = hns3vf_start_service,
2303 hns3vf_init_hw_ops(struct hns3_hw *hw)
2305 hw->ops.add_mc_mac_addr = hns3vf_add_mc_mac_addr;
2306 hw->ops.del_mc_mac_addr = hns3vf_remove_mc_mac_addr;
2307 hw->ops.add_uc_mac_addr = hns3vf_add_uc_mac_addr;
2308 hw->ops.del_uc_mac_addr = hns3vf_remove_uc_mac_addr;
2309 hw->ops.bind_ring_with_vector = hns3vf_bind_ring_with_vector;
2313 hns3vf_dev_init(struct rte_eth_dev *eth_dev)
2315 struct hns3_adapter *hns = eth_dev->data->dev_private;
2316 struct hns3_hw *hw = &hns->hw;
2319 PMD_INIT_FUNC_TRACE();
2321 hns3_flow_init(eth_dev);
2323 hns3_set_rxtx_function(eth_dev);
2324 eth_dev->dev_ops = &hns3vf_eth_dev_ops;
2325 eth_dev->rx_queue_count = hns3_rx_queue_count;
2326 ret = hns3_mp_init(eth_dev);
2330 if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
2331 hns3_tx_push_init(eth_dev);
2335 hw->adapter_state = HNS3_NIC_UNINITIALIZED;
2337 hw->data = eth_dev->data;
2338 hns3_parse_devargs(eth_dev);
2340 ret = hns3_reset_init(hw);
2342 goto err_init_reset;
2343 hw->reset.ops = &hns3vf_reset_ops;
2345 hns3vf_init_hw_ops(hw);
2346 ret = hns3vf_init_vf(eth_dev);
2348 PMD_INIT_LOG(ERR, "Failed to init vf: %d", ret);
2352 ret = hns3_init_mac_addrs(eth_dev);
2354 goto err_init_mac_addrs;
2356 hw->adapter_state = HNS3_NIC_INITIALIZED;
2358 if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
2360 hns3_err(hw, "Reschedule reset service after dev_init");
2361 hns3_schedule_reset(hns);
2363 /* IMP will wait ready flag before reset */
2364 hns3_notify_reset_ready(hw, false);
2366 rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
2371 hns3vf_uninit_vf(eth_dev);
2374 rte_free(hw->reset.wait_data);
2377 hns3_mp_uninit(eth_dev);
2380 eth_dev->dev_ops = NULL;
2381 eth_dev->rx_pkt_burst = NULL;
2382 eth_dev->rx_descriptor_status = NULL;
2383 eth_dev->tx_pkt_burst = NULL;
2384 eth_dev->tx_pkt_prepare = NULL;
2385 eth_dev->tx_descriptor_status = NULL;
2391 hns3vf_dev_uninit(struct rte_eth_dev *eth_dev)
2393 struct hns3_adapter *hns = eth_dev->data->dev_private;
2394 struct hns3_hw *hw = &hns->hw;
2396 PMD_INIT_FUNC_TRACE();
2398 if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
2399 hns3_mp_uninit(eth_dev);
2403 if (hw->adapter_state < HNS3_NIC_CLOSING)
2404 hns3vf_dev_close(eth_dev);
2406 hw->adapter_state = HNS3_NIC_REMOVED;
2411 eth_hns3vf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
2412 struct rte_pci_device *pci_dev)
2414 return rte_eth_dev_pci_generic_probe(pci_dev,
2415 sizeof(struct hns3_adapter),
2420 eth_hns3vf_pci_remove(struct rte_pci_device *pci_dev)
2422 return rte_eth_dev_pci_generic_remove(pci_dev, hns3vf_dev_uninit);
2425 static const struct rte_pci_id pci_id_hns3vf_map[] = {
2426 { RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_VF) },
2427 { RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_RDMA_PFC_VF) },
2428 { .vendor_id = 0, }, /* sentinel */
2431 static struct rte_pci_driver rte_hns3vf_pmd = {
2432 .id_table = pci_id_hns3vf_map,
2433 .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
2434 .probe = eth_hns3vf_pci_probe,
2435 .remove = eth_hns3vf_pci_remove,
2438 RTE_PMD_REGISTER_PCI(net_hns3_vf, rte_hns3vf_pmd);
2439 RTE_PMD_REGISTER_PCI_TABLE(net_hns3_vf, pci_id_hns3vf_map);
2440 RTE_PMD_REGISTER_KMOD_DEP(net_hns3_vf, "* igb_uio | vfio-pci");
2441 RTE_PMD_REGISTER_PARAM_STRING(net_hns3_vf,
2442 HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common "
2443 HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "
2444 HNS3_DEVARG_DEV_CAPS_MASK "=<1-65535> "
2445 HNS3_DEVARG_MBX_TIME_LIMIT_MS "=<uint16_t> ");