net/mlx5: add OS specific flow type selection
[dpdk.git] / drivers / net / i40e / base / i40e_adminq.c
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright(c) 2001-2020 Intel Corporation
3  */
4
5 #include "i40e_status.h"
6 #include "i40e_type.h"
7 #include "i40e_register.h"
8 #include "i40e_adminq.h"
9 #include "i40e_prototype.h"
10
11 /**
12  *  i40e_adminq_init_regs - Initialize AdminQ registers
13  *  @hw: pointer to the hardware structure
14  *
15  *  This assumes the alloc_asq and alloc_arq functions have already been called
16  **/
17 STATIC void i40e_adminq_init_regs(struct i40e_hw *hw)
18 {
19         /* set head and tail registers in our local struct */
20         if (i40e_is_vf(hw)) {
21                 hw->aq.asq.tail = I40E_VF_ATQT1;
22                 hw->aq.asq.head = I40E_VF_ATQH1;
23                 hw->aq.asq.len  = I40E_VF_ATQLEN1;
24                 hw->aq.asq.bal  = I40E_VF_ATQBAL1;
25                 hw->aq.asq.bah  = I40E_VF_ATQBAH1;
26                 hw->aq.arq.tail = I40E_VF_ARQT1;
27                 hw->aq.arq.head = I40E_VF_ARQH1;
28                 hw->aq.arq.len  = I40E_VF_ARQLEN1;
29                 hw->aq.arq.bal  = I40E_VF_ARQBAL1;
30                 hw->aq.arq.bah  = I40E_VF_ARQBAH1;
31 #ifdef PF_DRIVER
32         } else {
33                 hw->aq.asq.tail = I40E_PF_ATQT;
34                 hw->aq.asq.head = I40E_PF_ATQH;
35                 hw->aq.asq.len  = I40E_PF_ATQLEN;
36                 hw->aq.asq.bal  = I40E_PF_ATQBAL;
37                 hw->aq.asq.bah  = I40E_PF_ATQBAH;
38                 hw->aq.arq.tail = I40E_PF_ARQT;
39                 hw->aq.arq.head = I40E_PF_ARQH;
40                 hw->aq.arq.len  = I40E_PF_ARQLEN;
41                 hw->aq.arq.bal  = I40E_PF_ARQBAL;
42                 hw->aq.arq.bah  = I40E_PF_ARQBAH;
43 #endif
44         }
45 }
46
47 /**
48  *  i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings
49  *  @hw: pointer to the hardware structure
50  **/
51 enum i40e_status_code i40e_alloc_adminq_asq_ring(struct i40e_hw *hw)
52 {
53         enum i40e_status_code ret_code;
54
55         ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq.desc_buf,
56                                          i40e_mem_atq_ring,
57                                          (hw->aq.num_asq_entries *
58                                          sizeof(struct i40e_aq_desc)),
59                                          I40E_ADMINQ_DESC_ALIGNMENT);
60         if (ret_code)
61                 return ret_code;
62
63         ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.cmd_buf,
64                                           (hw->aq.num_asq_entries *
65                                           sizeof(struct i40e_asq_cmd_details)));
66         if (ret_code) {
67                 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
68                 return ret_code;
69         }
70
71         return ret_code;
72 }
73
74 /**
75  *  i40e_alloc_adminq_arq_ring - Allocate Admin Queue receive rings
76  *  @hw: pointer to the hardware structure
77  **/
78 enum i40e_status_code i40e_alloc_adminq_arq_ring(struct i40e_hw *hw)
79 {
80         enum i40e_status_code ret_code;
81
82         ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq.desc_buf,
83                                          i40e_mem_arq_ring,
84                                          (hw->aq.num_arq_entries *
85                                          sizeof(struct i40e_aq_desc)),
86                                          I40E_ADMINQ_DESC_ALIGNMENT);
87
88         return ret_code;
89 }
90
91 /**
92  *  i40e_free_adminq_asq - Free Admin Queue send rings
93  *  @hw: pointer to the hardware structure
94  *
95  *  This assumes the posted send buffers have already been cleaned
96  *  and de-allocated
97  **/
98 void i40e_free_adminq_asq(struct i40e_hw *hw)
99 {
100         i40e_free_virt_mem(hw, &hw->aq.asq.cmd_buf);
101         i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
102 }
103
104 /**
105  *  i40e_free_adminq_arq - Free Admin Queue receive rings
106  *  @hw: pointer to the hardware structure
107  *
108  *  This assumes the posted receive buffers have already been cleaned
109  *  and de-allocated
110  **/
111 void i40e_free_adminq_arq(struct i40e_hw *hw)
112 {
113         i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf);
114 }
115
116 /**
117  *  i40e_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue
118  *  @hw: pointer to the hardware structure
119  **/
120 STATIC enum i40e_status_code i40e_alloc_arq_bufs(struct i40e_hw *hw)
121 {
122         enum i40e_status_code ret_code;
123         struct i40e_aq_desc *desc;
124         struct i40e_dma_mem *bi;
125         int i;
126
127         /* We'll be allocating the buffer info memory first, then we can
128          * allocate the mapped buffers for the event processing
129          */
130
131         /* buffer_info structures do not need alignment */
132         ret_code = i40e_allocate_virt_mem(hw, &hw->aq.arq.dma_head,
133                 (hw->aq.num_arq_entries * sizeof(struct i40e_dma_mem)));
134         if (ret_code)
135                 goto alloc_arq_bufs;
136         hw->aq.arq.r.arq_bi = (struct i40e_dma_mem *)hw->aq.arq.dma_head.va;
137
138         /* allocate the mapped buffers */
139         for (i = 0; i < hw->aq.num_arq_entries; i++) {
140                 bi = &hw->aq.arq.r.arq_bi[i];
141                 ret_code = i40e_allocate_dma_mem(hw, bi,
142                                                  i40e_mem_arq_buf,
143                                                  hw->aq.arq_buf_size,
144                                                  I40E_ADMINQ_DESC_ALIGNMENT);
145                 if (ret_code)
146                         goto unwind_alloc_arq_bufs;
147
148                 /* now configure the descriptors for use */
149                 desc = I40E_ADMINQ_DESC(hw->aq.arq, i);
150
151                 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF);
152                 if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
153                         desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB);
154                 desc->opcode = 0;
155                 /* This is in accordance with Admin queue design, there is no
156                  * register for buffer size configuration
157                  */
158                 desc->datalen = CPU_TO_LE16((u16)bi->size);
159                 desc->retval = 0;
160                 desc->cookie_high = 0;
161                 desc->cookie_low = 0;
162                 desc->params.external.addr_high =
163                         CPU_TO_LE32(I40E_HI_DWORD(bi->pa));
164                 desc->params.external.addr_low =
165                         CPU_TO_LE32(I40E_LO_DWORD(bi->pa));
166                 desc->params.external.param0 = 0;
167                 desc->params.external.param1 = 0;
168         }
169
170 alloc_arq_bufs:
171         return ret_code;
172
173 unwind_alloc_arq_bufs:
174         /* don't try to free the one that failed... */
175         i--;
176         for (; i >= 0; i--)
177                 i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
178         i40e_free_virt_mem(hw, &hw->aq.arq.dma_head);
179
180         return ret_code;
181 }
182
183 /**
184  *  i40e_alloc_asq_bufs - Allocate empty buffer structs for the send queue
185  *  @hw: pointer to the hardware structure
186  **/
187 STATIC enum i40e_status_code i40e_alloc_asq_bufs(struct i40e_hw *hw)
188 {
189         enum i40e_status_code ret_code;
190         struct i40e_dma_mem *bi;
191         int i;
192
193         /* No mapped memory needed yet, just the buffer info structures */
194         ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.dma_head,
195                 (hw->aq.num_asq_entries * sizeof(struct i40e_dma_mem)));
196         if (ret_code)
197                 goto alloc_asq_bufs;
198         hw->aq.asq.r.asq_bi = (struct i40e_dma_mem *)hw->aq.asq.dma_head.va;
199
200         /* allocate the mapped buffers */
201         for (i = 0; i < hw->aq.num_asq_entries; i++) {
202                 bi = &hw->aq.asq.r.asq_bi[i];
203                 ret_code = i40e_allocate_dma_mem(hw, bi,
204                                                  i40e_mem_asq_buf,
205                                                  hw->aq.asq_buf_size,
206                                                  I40E_ADMINQ_DESC_ALIGNMENT);
207                 if (ret_code)
208                         goto unwind_alloc_asq_bufs;
209         }
210 alloc_asq_bufs:
211         return ret_code;
212
213 unwind_alloc_asq_bufs:
214         /* don't try to free the one that failed... */
215         i--;
216         for (; i >= 0; i--)
217                 i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
218         i40e_free_virt_mem(hw, &hw->aq.asq.dma_head);
219
220         return ret_code;
221 }
222
223 /**
224  *  i40e_free_arq_bufs - Free receive queue buffer info elements
225  *  @hw: pointer to the hardware structure
226  **/
227 STATIC void i40e_free_arq_bufs(struct i40e_hw *hw)
228 {
229         int i;
230
231         /* free descriptors */
232         for (i = 0; i < hw->aq.num_arq_entries; i++)
233                 i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
234
235         /* free the descriptor memory */
236         i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf);
237
238         /* free the dma header */
239         i40e_free_virt_mem(hw, &hw->aq.arq.dma_head);
240 }
241
242 /**
243  *  i40e_free_asq_bufs - Free send queue buffer info elements
244  *  @hw: pointer to the hardware structure
245  **/
246 STATIC void i40e_free_asq_bufs(struct i40e_hw *hw)
247 {
248         int i;
249
250         /* only unmap if the address is non-NULL */
251         for (i = 0; i < hw->aq.num_asq_entries; i++)
252                 if (hw->aq.asq.r.asq_bi[i].pa)
253                         i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
254
255         /* free the buffer info list */
256         i40e_free_virt_mem(hw, &hw->aq.asq.cmd_buf);
257
258         /* free the descriptor memory */
259         i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
260
261         /* free the dma header */
262         i40e_free_virt_mem(hw, &hw->aq.asq.dma_head);
263 }
264
265 /**
266  *  i40e_config_asq_regs - configure ASQ registers
267  *  @hw: pointer to the hardware structure
268  *
269  *  Configure base address and length registers for the transmit queue
270  **/
271 STATIC enum i40e_status_code i40e_config_asq_regs(struct i40e_hw *hw)
272 {
273         enum i40e_status_code ret_code = I40E_SUCCESS;
274         u32 reg = 0;
275
276         /* Clear Head and Tail */
277         wr32(hw, hw->aq.asq.head, 0);
278         wr32(hw, hw->aq.asq.tail, 0);
279
280         /* set starting point */
281 #ifdef PF_DRIVER
282 #ifdef INTEGRATED_VF
283         if (!i40e_is_vf(hw))
284                 wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
285                                           I40E_PF_ATQLEN_ATQENABLE_MASK));
286 #else
287         wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
288                                   I40E_PF_ATQLEN_ATQENABLE_MASK));
289 #endif /* INTEGRATED_VF */
290 #endif /* PF_DRIVER */
291 #ifdef VF_DRIVER
292 #ifdef INTEGRATED_VF
293         if (i40e_is_vf(hw))
294                 wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
295                                           I40E_VF_ATQLEN1_ATQENABLE_MASK));
296 #else
297         wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
298                                   I40E_VF_ATQLEN1_ATQENABLE_MASK));
299 #endif /* INTEGRATED_VF */
300 #endif /* VF_DRIVER */
301         wr32(hw, hw->aq.asq.bal, I40E_LO_DWORD(hw->aq.asq.desc_buf.pa));
302         wr32(hw, hw->aq.asq.bah, I40E_HI_DWORD(hw->aq.asq.desc_buf.pa));
303
304         /* Check one register to verify that config was applied */
305         reg = rd32(hw, hw->aq.asq.bal);
306         if (reg != I40E_LO_DWORD(hw->aq.asq.desc_buf.pa))
307                 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
308
309         return ret_code;
310 }
311
312 /**
313  *  i40e_config_arq_regs - ARQ register configuration
314  *  @hw: pointer to the hardware structure
315  *
316  * Configure base address and length registers for the receive (event queue)
317  **/
318 STATIC enum i40e_status_code i40e_config_arq_regs(struct i40e_hw *hw)
319 {
320         enum i40e_status_code ret_code = I40E_SUCCESS;
321         u32 reg = 0;
322
323         /* Clear Head and Tail */
324         wr32(hw, hw->aq.arq.head, 0);
325         wr32(hw, hw->aq.arq.tail, 0);
326
327         /* set starting point */
328 #ifdef PF_DRIVER
329 #ifdef INTEGRATED_VF
330         if (!i40e_is_vf(hw))
331                 wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
332                                           I40E_PF_ARQLEN_ARQENABLE_MASK));
333 #else
334         wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
335                                   I40E_PF_ARQLEN_ARQENABLE_MASK));
336 #endif /* INTEGRATED_VF */
337 #endif /* PF_DRIVER */
338 #ifdef VF_DRIVER
339 #ifdef INTEGRATED_VF
340         if (i40e_is_vf(hw))
341                 wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
342                                           I40E_VF_ARQLEN1_ARQENABLE_MASK));
343 #else
344         wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
345                                   I40E_VF_ARQLEN1_ARQENABLE_MASK));
346 #endif /* INTEGRATED_VF */
347 #endif /* VF_DRIVER */
348         wr32(hw, hw->aq.arq.bal, I40E_LO_DWORD(hw->aq.arq.desc_buf.pa));
349         wr32(hw, hw->aq.arq.bah, I40E_HI_DWORD(hw->aq.arq.desc_buf.pa));
350
351         /* Update tail in the HW to post pre-allocated buffers */
352         wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1);
353
354         /* Check one register to verify that config was applied */
355         reg = rd32(hw, hw->aq.arq.bal);
356         if (reg != I40E_LO_DWORD(hw->aq.arq.desc_buf.pa))
357                 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
358
359         return ret_code;
360 }
361
362 /**
363  *  i40e_init_asq - main initialization routine for ASQ
364  *  @hw: pointer to the hardware structure
365  *
366  *  This is the main initialization routine for the Admin Send Queue
367  *  Prior to calling this function, drivers *MUST* set the following fields
368  *  in the hw->aq structure:
369  *     - hw->aq.num_asq_entries
370  *     - hw->aq.arq_buf_size
371  *
372  *  Do *NOT* hold the lock when calling this as the memory allocation routines
373  *  called are not going to be atomic context safe
374  **/
375 enum i40e_status_code i40e_init_asq(struct i40e_hw *hw)
376 {
377         enum i40e_status_code ret_code = I40E_SUCCESS;
378
379         if (hw->aq.asq.count > 0) {
380                 /* queue already initialized */
381                 ret_code = I40E_ERR_NOT_READY;
382                 goto init_adminq_exit;
383         }
384
385         /* verify input for valid configuration */
386         if ((hw->aq.num_asq_entries == 0) ||
387             (hw->aq.asq_buf_size == 0)) {
388                 ret_code = I40E_ERR_CONFIG;
389                 goto init_adminq_exit;
390         }
391
392         hw->aq.asq.next_to_use = 0;
393         hw->aq.asq.next_to_clean = 0;
394
395         /* allocate the ring memory */
396         ret_code = i40e_alloc_adminq_asq_ring(hw);
397         if (ret_code != I40E_SUCCESS)
398                 goto init_adminq_exit;
399
400         /* allocate buffers in the rings */
401         ret_code = i40e_alloc_asq_bufs(hw);
402         if (ret_code != I40E_SUCCESS)
403                 goto init_adminq_free_rings;
404
405         /* initialize base registers */
406         ret_code = i40e_config_asq_regs(hw);
407         if (ret_code != I40E_SUCCESS)
408                 goto init_config_regs;
409
410         /* success! */
411         hw->aq.asq.count = hw->aq.num_asq_entries;
412         goto init_adminq_exit;
413
414 init_adminq_free_rings:
415         i40e_free_adminq_asq(hw);
416         return ret_code;
417
418 init_config_regs:
419         i40e_free_asq_bufs(hw);
420
421 init_adminq_exit:
422         return ret_code;
423 }
424
425 /**
426  *  i40e_init_arq - initialize ARQ
427  *  @hw: pointer to the hardware structure
428  *
429  *  The main initialization routine for the Admin Receive (Event) Queue.
430  *  Prior to calling this function, drivers *MUST* set the following fields
431  *  in the hw->aq structure:
432  *     - hw->aq.num_asq_entries
433  *     - hw->aq.arq_buf_size
434  *
435  *  Do *NOT* hold the lock when calling this as the memory allocation routines
436  *  called are not going to be atomic context safe
437  **/
438 enum i40e_status_code i40e_init_arq(struct i40e_hw *hw)
439 {
440         enum i40e_status_code ret_code = I40E_SUCCESS;
441
442         if (hw->aq.arq.count > 0) {
443                 /* queue already initialized */
444                 ret_code = I40E_ERR_NOT_READY;
445                 goto init_adminq_exit;
446         }
447
448         /* verify input for valid configuration */
449         if ((hw->aq.num_arq_entries == 0) ||
450             (hw->aq.arq_buf_size == 0)) {
451                 ret_code = I40E_ERR_CONFIG;
452                 goto init_adminq_exit;
453         }
454
455         hw->aq.arq.next_to_use = 0;
456         hw->aq.arq.next_to_clean = 0;
457
458         /* allocate the ring memory */
459         ret_code = i40e_alloc_adminq_arq_ring(hw);
460         if (ret_code != I40E_SUCCESS)
461                 goto init_adminq_exit;
462
463         /* allocate buffers in the rings */
464         ret_code = i40e_alloc_arq_bufs(hw);
465         if (ret_code != I40E_SUCCESS)
466                 goto init_adminq_free_rings;
467
468         /* initialize base registers */
469         ret_code = i40e_config_arq_regs(hw);
470         if (ret_code != I40E_SUCCESS)
471                 goto init_adminq_free_rings;
472
473         /* success! */
474         hw->aq.arq.count = hw->aq.num_arq_entries;
475         goto init_adminq_exit;
476
477 init_adminq_free_rings:
478         i40e_free_adminq_arq(hw);
479
480 init_adminq_exit:
481         return ret_code;
482 }
483
484 /**
485  *  i40e_shutdown_asq - shutdown the ASQ
486  *  @hw: pointer to the hardware structure
487  *
488  *  The main shutdown routine for the Admin Send Queue
489  **/
490 enum i40e_status_code i40e_shutdown_asq(struct i40e_hw *hw)
491 {
492         enum i40e_status_code ret_code = I40E_SUCCESS;
493
494         i40e_acquire_spinlock(&hw->aq.asq_spinlock);
495
496         if (hw->aq.asq.count == 0) {
497                 ret_code = I40E_ERR_NOT_READY;
498                 goto shutdown_asq_out;
499         }
500
501         /* Stop firmware AdminQ processing */
502         wr32(hw, hw->aq.asq.head, 0);
503         wr32(hw, hw->aq.asq.tail, 0);
504         wr32(hw, hw->aq.asq.len, 0);
505         wr32(hw, hw->aq.asq.bal, 0);
506         wr32(hw, hw->aq.asq.bah, 0);
507
508         hw->aq.asq.count = 0; /* to indicate uninitialized queue */
509
510         /* free ring buffers */
511         i40e_free_asq_bufs(hw);
512
513 shutdown_asq_out:
514         i40e_release_spinlock(&hw->aq.asq_spinlock);
515         return ret_code;
516 }
517
518 /**
519  *  i40e_shutdown_arq - shutdown ARQ
520  *  @hw: pointer to the hardware structure
521  *
522  *  The main shutdown routine for the Admin Receive Queue
523  **/
524 enum i40e_status_code i40e_shutdown_arq(struct i40e_hw *hw)
525 {
526         enum i40e_status_code ret_code = I40E_SUCCESS;
527
528         i40e_acquire_spinlock(&hw->aq.arq_spinlock);
529
530         if (hw->aq.arq.count == 0) {
531                 ret_code = I40E_ERR_NOT_READY;
532                 goto shutdown_arq_out;
533         }
534
535         /* Stop firmware AdminQ processing */
536         wr32(hw, hw->aq.arq.head, 0);
537         wr32(hw, hw->aq.arq.tail, 0);
538         wr32(hw, hw->aq.arq.len, 0);
539         wr32(hw, hw->aq.arq.bal, 0);
540         wr32(hw, hw->aq.arq.bah, 0);
541
542         hw->aq.arq.count = 0; /* to indicate uninitialized queue */
543
544         /* free ring buffers */
545         i40e_free_arq_bufs(hw);
546
547 shutdown_arq_out:
548         i40e_release_spinlock(&hw->aq.arq_spinlock);
549         return ret_code;
550 }
551 #ifdef PF_DRIVER
552
553 /**
554  *  i40e_resume_aq - resume AQ processing from 0
555  *  @hw: pointer to the hardware structure
556  **/
557 STATIC void i40e_resume_aq(struct i40e_hw *hw)
558 {
559         /* Registers are reset after PF reset */
560         hw->aq.asq.next_to_use = 0;
561         hw->aq.asq.next_to_clean = 0;
562
563         i40e_config_asq_regs(hw);
564
565         hw->aq.arq.next_to_use = 0;
566         hw->aq.arq.next_to_clean = 0;
567
568         i40e_config_arq_regs(hw);
569 }
570 #endif /* PF_DRIVER */
571
572 /**
573  *  i40e_set_hw_flags - set HW flags
574  *  @hw: pointer to the hardware structure
575  **/
576 STATIC void i40e_set_hw_flags(struct i40e_hw *hw)
577 {
578         struct i40e_adminq_info *aq = &hw->aq;
579
580         hw->flags = 0;
581
582         switch (hw->mac.type) {
583         case I40E_MAC_XL710:
584                 if (aq->api_maj_ver > 1 ||
585                     (aq->api_maj_ver == 1 &&
586                      aq->api_min_ver >= I40E_MINOR_VER_GET_LINK_INFO_XL710)) {
587                         hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE;
588                         hw->flags |= I40E_HW_FLAG_FW_LLDP_STOPPABLE;
589                         /* The ability to RX (not drop) 802.1ad frames */
590                         hw->flags |= I40E_HW_FLAG_802_1AD_CAPABLE;
591                 }
592                 break;
593         case I40E_MAC_X722:
594                 hw->flags |= I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE |
595                              I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK;
596
597                 if (aq->api_maj_ver > 1 ||
598                     (aq->api_maj_ver == 1 &&
599                      aq->api_min_ver >= I40E_MINOR_VER_FW_LLDP_STOPPABLE_X722))
600                         hw->flags |= I40E_HW_FLAG_FW_LLDP_STOPPABLE;
601
602                 if (aq->api_maj_ver > 1 ||
603                     (aq->api_maj_ver == 1 &&
604                      aq->api_min_ver >= I40E_MINOR_VER_GET_LINK_INFO_X722))
605                         hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE;
606                 /* fall through */
607         default:
608                 break;
609         }
610
611         /* Newer versions of firmware require lock when reading the NVM */
612         if (aq->api_maj_ver > 1 ||
613             (aq->api_maj_ver == 1 &&
614              aq->api_min_ver >= 5))
615                 hw->flags |= I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK;
616
617         if (aq->api_maj_ver > 1 ||
618             (aq->api_maj_ver == 1 &&
619              aq->api_min_ver >= 8)) {
620                 hw->flags |= I40E_HW_FLAG_FW_LLDP_PERSISTENT;
621                 hw->flags |= I40E_HW_FLAG_DROP_MODE;
622         }
623
624         if (aq->api_maj_ver > 1 ||
625             (aq->api_maj_ver == 1 &&
626              aq->api_min_ver >= 9))
627                 hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_EXTENDED;
628 }
629
630 /**
631  *  i40e_init_adminq - main initialization routine for Admin Queue
632  *  @hw: pointer to the hardware structure
633  *
634  *  Prior to calling this function, drivers *MUST* set the following fields
635  *  in the hw->aq structure:
636  *     - hw->aq.num_asq_entries
637  *     - hw->aq.num_arq_entries
638  *     - hw->aq.arq_buf_size
639  *     - hw->aq.asq_buf_size
640  **/
641 enum i40e_status_code i40e_init_adminq(struct i40e_hw *hw)
642 {
643         struct i40e_adminq_info *aq = &hw->aq;
644         enum i40e_status_code ret_code;
645         u16 cfg_ptr, oem_hi, oem_lo;
646         u16 eetrack_lo, eetrack_hi;
647         int retry = 0;
648
649         /* verify input for valid configuration */
650         if (aq->num_arq_entries == 0 ||
651             aq->num_asq_entries == 0 ||
652             aq->arq_buf_size == 0 ||
653             aq->asq_buf_size == 0) {
654                 ret_code = I40E_ERR_CONFIG;
655                 goto init_adminq_exit;
656         }
657         i40e_init_spinlock(&aq->asq_spinlock);
658         i40e_init_spinlock(&aq->arq_spinlock);
659
660         /* Set up register offsets */
661         i40e_adminq_init_regs(hw);
662
663         /* setup ASQ command write back timeout */
664         hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT;
665
666         /* allocate the ASQ */
667         ret_code = i40e_init_asq(hw);
668         if (ret_code != I40E_SUCCESS)
669                 goto init_adminq_destroy_spinlocks;
670
671         /* allocate the ARQ */
672         ret_code = i40e_init_arq(hw);
673         if (ret_code != I40E_SUCCESS)
674                 goto init_adminq_free_asq;
675
676         /* VF has no need of firmware */
677         if (i40e_is_vf(hw))
678                 goto init_adminq_exit;
679
680         /* There are some cases where the firmware may not be quite ready
681          * for AdminQ operations, so we retry the AdminQ setup a few times
682          * if we see timeouts in this first AQ call.
683          */
684         do {
685                 ret_code = i40e_aq_get_firmware_version(hw,
686                                                         &aq->fw_maj_ver,
687                                                         &aq->fw_min_ver,
688                                                         &aq->fw_build,
689                                                         &aq->api_maj_ver,
690                                                         &aq->api_min_ver,
691                                                         NULL);
692                 if (ret_code != I40E_ERR_ADMIN_QUEUE_TIMEOUT)
693                         break;
694                 retry++;
695                 i40e_msec_delay(100);
696                 i40e_resume_aq(hw);
697         } while (retry < 10);
698         if (ret_code != I40E_SUCCESS)
699                 goto init_adminq_free_arq;
700
701         /*
702          * Some features were introduced in different FW API version
703          * for different MAC type.
704          */
705         i40e_set_hw_flags(hw);
706
707         /* get the NVM version info */
708         i40e_read_nvm_word(hw, I40E_SR_NVM_DEV_STARTER_VERSION,
709                            &hw->nvm.version);
710         i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_LO, &eetrack_lo);
711         i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_HI, &eetrack_hi);
712         hw->nvm.eetrack = (eetrack_hi << 16) | eetrack_lo;
713         i40e_read_nvm_word(hw, I40E_SR_BOOT_CONFIG_PTR, &cfg_ptr);
714         i40e_read_nvm_word(hw, (cfg_ptr + I40E_NVM_OEM_VER_OFF),
715                            &oem_hi);
716         i40e_read_nvm_word(hw, (cfg_ptr + (I40E_NVM_OEM_VER_OFF + 1)),
717                            &oem_lo);
718         hw->nvm.oem_ver = ((u32)oem_hi << 16) | oem_lo;
719
720         if (aq->api_maj_ver > I40E_FW_API_VERSION_MAJOR) {
721                 ret_code = I40E_ERR_FIRMWARE_API_VERSION;
722                 goto init_adminq_free_arq;
723         }
724
725         /* pre-emptive resource lock release */
726         i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL);
727         hw->nvm_release_on_done = false;
728         hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
729
730         ret_code = I40E_SUCCESS;
731
732         /* success! */
733         goto init_adminq_exit;
734
735 init_adminq_free_arq:
736         i40e_shutdown_arq(hw);
737 init_adminq_free_asq:
738         i40e_shutdown_asq(hw);
739 init_adminq_destroy_spinlocks:
740         i40e_destroy_spinlock(&aq->asq_spinlock);
741         i40e_destroy_spinlock(&aq->arq_spinlock);
742
743 init_adminq_exit:
744         return ret_code;
745 }
746
747 /**
748  *  i40e_shutdown_adminq - shutdown routine for the Admin Queue
749  *  @hw: pointer to the hardware structure
750  **/
751 enum i40e_status_code i40e_shutdown_adminq(struct i40e_hw *hw)
752 {
753         enum i40e_status_code ret_code = I40E_SUCCESS;
754
755         if (i40e_check_asq_alive(hw))
756                 i40e_aq_queue_shutdown(hw, true);
757
758         i40e_shutdown_asq(hw);
759         i40e_shutdown_arq(hw);
760         i40e_destroy_spinlock(&hw->aq.asq_spinlock);
761         i40e_destroy_spinlock(&hw->aq.arq_spinlock);
762
763         if (hw->nvm_buff.va)
764                 i40e_free_virt_mem(hw, &hw->nvm_buff);
765
766         return ret_code;
767 }
768
769 /**
770  *  i40e_clean_asq - cleans Admin send queue
771  *  @hw: pointer to the hardware structure
772  *
773  *  returns the number of free desc
774  **/
775 u16 i40e_clean_asq(struct i40e_hw *hw)
776 {
777         struct i40e_adminq_ring *asq = &(hw->aq.asq);
778         struct i40e_asq_cmd_details *details;
779         u16 ntc = asq->next_to_clean;
780         struct i40e_aq_desc desc_cb;
781         struct i40e_aq_desc *desc;
782
783         desc = I40E_ADMINQ_DESC(*asq, ntc);
784         details = I40E_ADMINQ_DETAILS(*asq, ntc);
785         while (rd32(hw, hw->aq.asq.head) != ntc) {
786                 i40e_debug(hw, I40E_DEBUG_AQ_COMMAND,
787                            "ntc %d head %d.\n", ntc, rd32(hw, hw->aq.asq.head));
788
789                 if (details->callback) {
790                         I40E_ADMINQ_CALLBACK cb_func =
791                                         (I40E_ADMINQ_CALLBACK)details->callback;
792                         i40e_memcpy(&desc_cb, desc, sizeof(struct i40e_aq_desc),
793                                     I40E_DMA_TO_DMA);
794                         cb_func(hw, &desc_cb);
795                 }
796                 i40e_memset(desc, 0, sizeof(*desc), I40E_DMA_MEM);
797                 i40e_memset(details, 0, sizeof(*details), I40E_NONDMA_MEM);
798                 ntc++;
799                 if (ntc == asq->count)
800                         ntc = 0;
801                 desc = I40E_ADMINQ_DESC(*asq, ntc);
802                 details = I40E_ADMINQ_DETAILS(*asq, ntc);
803         }
804
805         asq->next_to_clean = ntc;
806
807         return I40E_DESC_UNUSED(asq);
808 }
809
810 /**
811  *  i40e_asq_done - check if FW has processed the Admin Send Queue
812  *  @hw: pointer to the hw struct
813  *
814  *  Returns true if the firmware has processed all descriptors on the
815  *  admin send queue. Returns false if there are still requests pending.
816  **/
817 #ifdef VF_DRIVER
818 bool i40e_asq_done(struct i40e_hw *hw)
819 #else
820 STATIC bool i40e_asq_done(struct i40e_hw *hw)
821 #endif
822 {
823         /* AQ designers suggest use of head for better
824          * timing reliability than DD bit
825          */
826         return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use;
827
828 }
829
830 /**
831  *  i40e_asq_send_command - send command to Admin Queue
832  *  @hw: pointer to the hw struct
833  *  @desc: prefilled descriptor describing the command (non DMA mem)
834  *  @buff: buffer to use for indirect commands
835  *  @buff_size: size of buffer for indirect commands
836  *  @cmd_details: pointer to command details structure
837  *
838  *  This is the main send command driver routine for the Admin Queue send
839  *  queue.  It runs the queue, cleans the queue, etc
840  **/
841 enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw,
842                                 struct i40e_aq_desc *desc,
843                                 void *buff, /* can be NULL */
844                                 u16  buff_size,
845                                 struct i40e_asq_cmd_details *cmd_details)
846 {
847         enum i40e_status_code status = I40E_SUCCESS;
848         struct i40e_dma_mem *dma_buff = NULL;
849         struct i40e_asq_cmd_details *details;
850         struct i40e_aq_desc *desc_on_ring;
851         bool cmd_completed = false;
852         u16  retval = 0;
853         u32  val = 0;
854
855         i40e_acquire_spinlock(&hw->aq.asq_spinlock);
856
857         hw->aq.asq_last_status = I40E_AQ_RC_OK;
858
859         if (hw->aq.asq.count == 0) {
860                 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
861                            "AQTX: Admin queue not initialized.\n");
862                 status = I40E_ERR_QUEUE_EMPTY;
863                 goto asq_send_command_error;
864         }
865
866         val = rd32(hw, hw->aq.asq.head);
867         if (val >= hw->aq.num_asq_entries) {
868                 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
869                            "AQTX: head overrun at %d\n", val);
870                 status = I40E_ERR_ADMIN_QUEUE_FULL;
871                 goto asq_send_command_error;
872         }
873
874         details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
875         if (cmd_details) {
876                 i40e_memcpy(details,
877                             cmd_details,
878                             sizeof(struct i40e_asq_cmd_details),
879                             I40E_NONDMA_TO_NONDMA);
880
881                 /* If the cmd_details are defined copy the cookie.  The
882                  * CPU_TO_LE32 is not needed here because the data is ignored
883                  * by the FW, only used by the driver
884                  */
885                 if (details->cookie) {
886                         desc->cookie_high =
887                                 CPU_TO_LE32(I40E_HI_DWORD(details->cookie));
888                         desc->cookie_low =
889                                 CPU_TO_LE32(I40E_LO_DWORD(details->cookie));
890                 }
891         } else {
892                 i40e_memset(details, 0,
893                             sizeof(struct i40e_asq_cmd_details),
894                             I40E_NONDMA_MEM);
895         }
896
897         /* clear requested flags and then set additional flags if defined */
898         desc->flags &= ~CPU_TO_LE16(details->flags_dis);
899         desc->flags |= CPU_TO_LE16(details->flags_ena);
900
901         if (buff_size > hw->aq.asq_buf_size) {
902                 i40e_debug(hw,
903                            I40E_DEBUG_AQ_MESSAGE,
904                            "AQTX: Invalid buffer size: %d.\n",
905                            buff_size);
906                 status = I40E_ERR_INVALID_SIZE;
907                 goto asq_send_command_error;
908         }
909
910         if (details->postpone && !details->async) {
911                 i40e_debug(hw,
912                            I40E_DEBUG_AQ_MESSAGE,
913                            "AQTX: Async flag not set along with postpone flag");
914                 status = I40E_ERR_PARAM;
915                 goto asq_send_command_error;
916         }
917
918         /* call clean and check queue available function to reclaim the
919          * descriptors that were processed by FW, the function returns the
920          * number of desc available
921          */
922         /* the clean function called here could be called in a separate thread
923          * in case of asynchronous completions
924          */
925         if (i40e_clean_asq(hw) == 0) {
926                 i40e_debug(hw,
927                            I40E_DEBUG_AQ_MESSAGE,
928                            "AQTX: Error queue is full.\n");
929                 status = I40E_ERR_ADMIN_QUEUE_FULL;
930                 goto asq_send_command_error;
931         }
932
933         /* initialize the temp desc pointer with the right desc */
934         desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
935
936         /* if the desc is available copy the temp desc to the right place */
937         i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc),
938                     I40E_NONDMA_TO_DMA);
939
940         /* if buff is not NULL assume indirect command */
941         if (buff != NULL) {
942                 dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
943                 /* copy the user buff into the respective DMA buff */
944                 i40e_memcpy(dma_buff->va, buff, buff_size,
945                             I40E_NONDMA_TO_DMA);
946                 desc_on_ring->datalen = CPU_TO_LE16(buff_size);
947
948                 /* Update the address values in the desc with the pa value
949                  * for respective buffer
950                  */
951                 desc_on_ring->params.external.addr_high =
952                                 CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa));
953                 desc_on_ring->params.external.addr_low =
954                                 CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa));
955         }
956
957         /* bump the tail */
958         i40e_debug(hw, I40E_DEBUG_AQ_COMMAND, "AQTX: desc and buffer:\n");
959         i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
960                       buff, buff_size);
961         (hw->aq.asq.next_to_use)++;
962         if (hw->aq.asq.next_to_use == hw->aq.asq.count)
963                 hw->aq.asq.next_to_use = 0;
964         if (!details->postpone)
965                 wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
966
967         /* if cmd_details are not defined or async flag is not set,
968          * we need to wait for desc write back
969          */
970         if (!details->async && !details->postpone) {
971                 u32 total_delay = 0;
972
973                 do {
974                         /* AQ designers suggest use of head for better
975                          * timing reliability than DD bit
976                          */
977                         if (i40e_asq_done(hw))
978                                 break;
979                         i40e_usec_delay(50);
980                         total_delay += 50;
981                 } while (total_delay < hw->aq.asq_cmd_timeout);
982         }
983
984         /* if ready, copy the desc back to temp */
985         if (i40e_asq_done(hw)) {
986                 i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc),
987                             I40E_DMA_TO_NONDMA);
988                 if (buff != NULL)
989                         i40e_memcpy(buff, dma_buff->va, buff_size,
990                                     I40E_DMA_TO_NONDMA);
991                 retval = LE16_TO_CPU(desc->retval);
992                 if (retval != 0) {
993                         i40e_debug(hw,
994                                    I40E_DEBUG_AQ_MESSAGE,
995                                    "AQTX: Command completed with error 0x%X.\n",
996                                    retval);
997
998                         /* strip off FW internal code */
999                         retval &= 0xff;
1000                 }
1001                 cmd_completed = true;
1002                 if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
1003                         status = I40E_SUCCESS;
1004                 else if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_EBUSY)
1005                         status = I40E_ERR_NOT_READY;
1006                 else
1007                         status = I40E_ERR_ADMIN_QUEUE_ERROR;
1008                 hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
1009         }
1010
1011         i40e_debug(hw, I40E_DEBUG_AQ_COMMAND,
1012                    "AQTX: desc and buffer writeback:\n");
1013         i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);
1014
1015         /* save writeback aq if requested */
1016         if (details->wb_desc)
1017                 i40e_memcpy(details->wb_desc, desc_on_ring,
1018                             sizeof(struct i40e_aq_desc), I40E_DMA_TO_NONDMA);
1019
1020         /* update the error if time out occurred */
1021         if ((!cmd_completed) &&
1022             (!details->async && !details->postpone)) {
1023 #ifdef PF_DRIVER
1024                 if (rd32(hw, hw->aq.asq.len) & I40E_GL_ATQLEN_ATQCRIT_MASK) {
1025 #else
1026                 if (rd32(hw, hw->aq.asq.len) & I40E_VF_ATQLEN1_ATQCRIT_MASK) {
1027 #endif
1028                         i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
1029                                    "AQTX: AQ Critical error.\n");
1030                         status = I40E_ERR_ADMIN_QUEUE_CRITICAL_ERROR;
1031                 } else {
1032                         i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
1033                                    "AQTX: Writeback timeout.\n");
1034                         status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
1035                 }
1036         }
1037
1038 asq_send_command_error:
1039         i40e_release_spinlock(&hw->aq.asq_spinlock);
1040         return status;
1041 }
1042
1043 /**
1044  *  i40e_fill_default_direct_cmd_desc - AQ descriptor helper function
1045  *  @desc:     pointer to the temp descriptor (non DMA mem)
1046  *  @opcode:   the opcode can be used to decide which flags to turn off or on
1047  *
1048  *  Fill the desc with default values
1049  **/
1050 void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
1051                                        u16 opcode)
1052 {
1053         /* zero out the desc */
1054         i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc),
1055                     I40E_NONDMA_MEM);
1056         desc->opcode = CPU_TO_LE16(opcode);
1057         desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_SI);
1058 }
1059
1060 /**
1061  *  i40e_clean_arq_element
1062  *  @hw: pointer to the hw struct
1063  *  @e: event info from the receive descriptor, includes any buffers
1064  *  @pending: number of events that could be left to process
1065  *
1066  *  This function cleans one Admin Receive Queue element and returns
1067  *  the contents through e.  It can also return how many events are
1068  *  left to process through 'pending'
1069  **/
1070 enum i40e_status_code i40e_clean_arq_element(struct i40e_hw *hw,
1071                                              struct i40e_arq_event_info *e,
1072                                              u16 *pending)
1073 {
1074         enum i40e_status_code ret_code = I40E_SUCCESS;
1075         u16 ntc = hw->aq.arq.next_to_clean;
1076         struct i40e_aq_desc *desc;
1077         struct i40e_dma_mem *bi;
1078         u16 desc_idx;
1079         u16 datalen;
1080         u16 flags;
1081         u16 ntu;
1082
1083         /* pre-clean the event info */
1084         i40e_memset(&e->desc, 0, sizeof(e->desc), I40E_NONDMA_MEM);
1085
1086         /* take the lock before we start messing with the ring */
1087         i40e_acquire_spinlock(&hw->aq.arq_spinlock);
1088
1089         if (hw->aq.arq.count == 0) {
1090                 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
1091                            "AQRX: Admin queue not initialized.\n");
1092                 ret_code = I40E_ERR_QUEUE_EMPTY;
1093                 goto clean_arq_element_err;
1094         }
1095
1096         /* set next_to_use to head */
1097 #ifdef INTEGRATED_VF
1098         if (!i40e_is_vf(hw))
1099                 ntu = rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK;
1100         else
1101                 ntu = rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK;
1102 #else
1103 #ifdef PF_DRIVER
1104         ntu = rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK;
1105 #endif /* PF_DRIVER */
1106 #ifdef VF_DRIVER
1107         ntu = rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK;
1108 #endif /* VF_DRIVER */
1109 #endif /* INTEGRATED_VF */
1110         if (ntu == ntc) {
1111                 /* nothing to do - shouldn't need to update ring's values */
1112                 ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;
1113                 goto clean_arq_element_out;
1114         }
1115
1116         /* now clean the next descriptor */
1117         desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc);
1118         desc_idx = ntc;
1119
1120         hw->aq.arq_last_status =
1121                 (enum i40e_admin_queue_err)LE16_TO_CPU(desc->retval);
1122         flags = LE16_TO_CPU(desc->flags);
1123         if (flags & I40E_AQ_FLAG_ERR) {
1124                 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
1125                 i40e_debug(hw,
1126                            I40E_DEBUG_AQ_MESSAGE,
1127                            "AQRX: Event received with error 0x%X.\n",
1128                            hw->aq.arq_last_status);
1129         }
1130
1131         i40e_memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc),
1132                     I40E_DMA_TO_NONDMA);
1133         datalen = LE16_TO_CPU(desc->datalen);
1134         e->msg_len = min(datalen, e->buf_len);
1135         if (e->msg_buf != NULL && (e->msg_len != 0))
1136                 i40e_memcpy(e->msg_buf,
1137                             hw->aq.arq.r.arq_bi[desc_idx].va,
1138                             e->msg_len, I40E_DMA_TO_NONDMA);
1139
1140         i40e_debug(hw, I40E_DEBUG_AQ_COMMAND, "AQRX: desc and buffer:\n");
1141         i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
1142                       hw->aq.arq_buf_size);
1143
1144         /* Restore the original datalen and buffer address in the desc,
1145          * FW updates datalen to indicate the event message
1146          * size
1147          */
1148         bi = &hw->aq.arq.r.arq_bi[ntc];
1149         i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), I40E_DMA_MEM);
1150
1151         desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF);
1152         if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
1153                 desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB);
1154         desc->datalen = CPU_TO_LE16((u16)bi->size);
1155         desc->params.external.addr_high = CPU_TO_LE32(I40E_HI_DWORD(bi->pa));
1156         desc->params.external.addr_low = CPU_TO_LE32(I40E_LO_DWORD(bi->pa));
1157
1158         /* set tail = the last cleaned desc index. */
1159         wr32(hw, hw->aq.arq.tail, ntc);
1160         /* ntc is updated to tail + 1 */
1161         ntc++;
1162         if (ntc == hw->aq.num_arq_entries)
1163                 ntc = 0;
1164         hw->aq.arq.next_to_clean = ntc;
1165         hw->aq.arq.next_to_use = ntu;
1166
1167 #ifdef PF_DRIVER
1168         i40e_nvmupd_check_wait_event(hw, LE16_TO_CPU(e->desc.opcode), &e->desc);
1169 #endif /* PF_DRIVER */
1170 clean_arq_element_out:
1171         /* Set pending if needed, unlock and return */
1172         if (pending != NULL)
1173                 *pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
1174 clean_arq_element_err:
1175         i40e_release_spinlock(&hw->aq.arq_spinlock);
1176
1177         return ret_code;
1178 }
1179