net/mlx4: merge Tx queue rings management
[dpdk.git] / drivers / net / mlx4 / mlx4_prm.h
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright 2017 6WIND S.A.
5  *   Copyright 2017 Mellanox
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of 6WIND S.A. nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33
34 #ifndef MLX4_PRM_H_
35 #define MLX4_PRM_H_
36
37 #include <rte_atomic.h>
38 #include <rte_branch_prediction.h>
39 #include <rte_byteorder.h>
40
41 /* Verbs headers do not support -pedantic. */
42 #ifdef PEDANTIC
43 #pragma GCC diagnostic ignored "-Wpedantic"
44 #endif
45 #include <infiniband/mlx4dv.h>
46 #include <infiniband/verbs.h>
47 #ifdef PEDANTIC
48 #pragma GCC diagnostic error "-Wpedantic"
49 #endif
50
51 /* ConnectX-3 Tx queue basic block. */
52 #define MLX4_TXBB_SHIFT 6
53 #define MLX4_TXBB_SIZE (1 << MLX4_TXBB_SHIFT)
54
55 /* Typical TSO descriptor with 16 gather entries is 352 bytes. */
56 #define MLX4_MAX_WQE_SIZE 512
57 #define MLX4_SEG_SHIFT 4
58
59 /* Send queue stamping/invalidating information. */
60 #define MLX4_SQ_STAMP_STRIDE 64
61 #define MLX4_SQ_STAMP_DWORDS (MLX4_SQ_STAMP_STRIDE / 4)
62 #define MLX4_SQ_OWNER_BIT 31
63 #define MLX4_SQ_STAMP_VAL 0x7fffffff
64
65 /* Work queue element (WQE) flags. */
66 #define MLX4_WQE_CTRL_IIP_HDR_CSUM (1 << 28)
67 #define MLX4_WQE_CTRL_IL4_HDR_CSUM (1 << 27)
68
69 /* CQE checksum flags. */
70 enum {
71         MLX4_CQE_L2_TUNNEL_IPV4 = (int)(1u << 25),
72         MLX4_CQE_L2_TUNNEL_L4_CSUM = (int)(1u << 26),
73         MLX4_CQE_L2_TUNNEL = (int)(1u << 27),
74         MLX4_CQE_L2_VLAN_MASK = (int)(3u << 29),
75         MLX4_CQE_L2_TUNNEL_IPOK = (int)(1u << 31),
76 };
77
78 /* CQE status flags. */
79 #define MLX4_CQE_STATUS_IPV4 (1 << 22)
80 #define MLX4_CQE_STATUS_IPV4F (1 << 23)
81 #define MLX4_CQE_STATUS_IPV6 (1 << 24)
82 #define MLX4_CQE_STATUS_IPV4OPT (1 << 25)
83 #define MLX4_CQE_STATUS_TCP (1 << 26)
84 #define MLX4_CQE_STATUS_UDP (1 << 27)
85 #define MLX4_CQE_STATUS_PTYPE_MASK \
86         (MLX4_CQE_STATUS_IPV4 | \
87          MLX4_CQE_STATUS_IPV4F | \
88          MLX4_CQE_STATUS_IPV6 | \
89          MLX4_CQE_STATUS_IPV4OPT | \
90          MLX4_CQE_STATUS_TCP | \
91          MLX4_CQE_STATUS_UDP)
92
93 /* Send queue information. */
94 struct mlx4_sq {
95         volatile uint8_t *buf; /**< SQ buffer. */
96         volatile uint8_t *eob; /**< End of SQ buffer */
97         uint32_t size; /**< SQ size includes headroom. */
98         uint32_t remain_size; /**< Remaining WQE room in SQ (bytes). */
99         uint32_t owner_opcode;
100         /**< Default owner opcode with HW valid owner bit. */
101         uint32_t stamp; /**< Stamp value with an invalid HW owner bit. */
102         volatile uint32_t *db; /**< Pointer to the doorbell. */
103         uint32_t doorbell_qpn; /**< qp number to write to the doorbell. */
104 };
105
106 /* Completion queue events, numbers and masks. */
107 #define MLX4_CQ_DB_GEQ_N_MASK 0x3
108 #define MLX4_CQ_DOORBELL 0x20
109 #define MLX4_CQ_DB_CI_MASK 0xffffff
110
111 /* Completion queue information. */
112 struct mlx4_cq {
113         volatile void *cq_uar; /**< CQ user access region. */
114         volatile void *cq_db_reg; /**< CQ doorbell register. */
115         volatile uint32_t *set_ci_db; /**< Pointer to the CQ doorbell. */
116         volatile uint32_t *arm_db; /**< Arming Rx events doorbell. */
117         volatile uint8_t *buf; /**< Pointer to the completion queue buffer. */
118         uint32_t cqe_cnt; /**< Number of entries in the queue. */
119         uint32_t cqe_64:1; /**< CQ entry size is 64 bytes. */
120         uint32_t cons_index; /**< Last queue entry that was handled. */
121         uint32_t cqn; /**< CQ number. */
122         int arm_sn; /**< Rx event counter. */
123 };
124
125 /**
126  * Retrieve a CQE entry from a CQ.
127  *
128  * cqe = cq->buf + cons_index * cqe_size + cqe_offset
129  *
130  * Where cqe_size is 32 or 64 bytes and cqe_offset is 0 or 32 (depending on
131  * cqe_size).
132  *
133  * @param cq
134  *   CQ to retrieve entry from.
135  * @param index
136  *   Entry index.
137  *
138  * @return
139  *   Pointer to CQE entry.
140  */
141 static inline volatile struct mlx4_cqe *
142 mlx4_get_cqe(struct mlx4_cq *cq, uint32_t index)
143 {
144         return (volatile struct mlx4_cqe *)(cq->buf +
145                                    ((index & (cq->cqe_cnt - 1)) <<
146                                     (5 + cq->cqe_64)) +
147                                    (cq->cqe_64 << 5));
148 }
149
150 /**
151  * Transpose a flag in a value.
152  *
153  * @param val
154  *   Input value.
155  * @param from
156  *   Flag to retrieve from input value.
157  * @param to
158  *   Flag to set in output value.
159  *
160  * @return
161  *   Output value with transposed flag enabled if present on input.
162  */
163 static inline uint64_t
164 mlx4_transpose(uint64_t val, uint64_t from, uint64_t to)
165 {
166         return (from >= to ?
167                 (val & from) / (from / to) :
168                 (val & from) * (to / from));
169 }
170
171 #endif /* MLX4_PRM_H_ */