drivers/net/mlx5/linux/mlx5_os.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2015 6WIND S.A.
   3  * Copyright 2020 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stddef.h>
   7 #include <unistd.h>
   8 #include <string.h>
   9 #include <stdint.h>
  10 #include <stdlib.h>
  11 #include <errno.h>
  12 #include <net/if.h>
  13 #include <linux/rtnetlink.h>
  14 #include <linux/sockios.h>
  15 #include <linux/ethtool.h>
  16 #include <fcntl.h>
  17
  18 #include <rte_malloc.h>
  19 #include <ethdev_driver.h>
  20 #include <ethdev_pci.h>
  21 #include <rte_pci.h>
  22 #include <rte_bus_pci.h>
  23 #include <rte_bus_auxiliary.h>
  24 #include <rte_common.h>
  25 #include <rte_kvargs.h>
  26 #include <rte_rwlock.h>
  27 #include <rte_spinlock.h>
  28 #include <rte_string_fns.h>
  29 #include <rte_alarm.h>
  30 #include <rte_eal_paging.h>
  31
  32 #include <mlx5_glue.h>
  33 #include <mlx5_devx_cmds.h>
  34 #include <mlx5_common.h>
  35 #include <mlx5_common_mp.h>
  36 #include <mlx5_common_mr.h>
  37 #include <mlx5_malloc.h>
  38
  39 #include "mlx5_defs.h"
  40 #include "mlx5.h"
  41 #include "mlx5_common_os.h"
  42 #include "mlx5_utils.h"
  43 #include "mlx5_rxtx.h"
  44 #include "mlx5_rx.h"
  45 #include "mlx5_tx.h"
  46 #include "mlx5_autoconf.h"
  47 #include "mlx5_mr.h"
  48 #include "mlx5_flow.h"
  49 #include "rte_pmd_mlx5.h"
  50 #include "mlx5_verbs.h"
  51 #include "mlx5_nl.h"
  52 #include "mlx5_devx.h"
  53
  54 #ifndef HAVE_IBV_MLX5_MOD_MPW
  55 #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
  56 #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
  57 #endif
  58
  59 #ifndef HAVE_IBV_MLX5_MOD_CQE_128B_COMP
  60 #define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4)
  61 #endif
  62
  63 static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
  64
  65 /* Spinlock for mlx5_shared_data allocation. */
  66 static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
  67
  68 /* Process local data for secondary processes. */
  69 static struct mlx5_local_data mlx5_local_data;
  70
  71 /* rte flow indexed pool configuration. */
  72 static struct mlx5_indexed_pool_config icfg[] = {
  73         {
  74                 .size = sizeof(struct rte_flow),
  75                 .trunk_size = 64,
  76                 .need_lock = 1,
  77                 .release_mem_en = 0,
  78                 .malloc = mlx5_malloc,
  79                 .free = mlx5_free,
  80                 .per_core_cache = 0,
  81                 .type = "ctl_flow_ipool",
  82         },
  83         {
  84                 .size = sizeof(struct rte_flow),
  85                 .trunk_size = 64,
  86                 .grow_trunk = 3,
  87                 .grow_shift = 2,
  88                 .need_lock = 1,
  89                 .release_mem_en = 0,
  90                 .malloc = mlx5_malloc,
  91                 .free = mlx5_free,
  92                 .per_core_cache = 1 << 14,
  93                 .type = "rte_flow_ipool",
  94         },
  95         {
  96                 .size = sizeof(struct rte_flow),
  97                 .trunk_size = 64,
  98                 .grow_trunk = 3,
  99                 .grow_shift = 2,
 100                 .need_lock = 1,
 101                 .release_mem_en = 0,
 102                 .malloc = mlx5_malloc,
 103                 .free = mlx5_free,
 104                 .per_core_cache = 0,
 105                 .type = "mcp_flow_ipool",
 106         },
 107 };
 108
 109 /**
 110  * Set the completion channel file descriptor interrupt as non-blocking.
 111  *
 112  * @param[in] rxq_obj
 113  *   Pointer to RQ channel object, which includes the channel fd
 114  *
 115  * @param[out] fd
 116  *   The file descriptor (representing the intetrrupt) used in this channel.
 117  *
 118  * @return
 119  *   0 on successfully setting the fd to non-blocking, non-zero otherwise.
 120  */
 121 int
 122 mlx5_os_set_nonblock_channel_fd(int fd)
 123 {
 124         int flags;
 125
 126         flags = fcntl(fd, F_GETFL);
 127         return fcntl(fd, F_SETFL, flags | O_NONBLOCK);
 128 }
 129
 130 /**
 131  * Get mlx5 device attributes. The glue function query_device_ex() is called
 132  * with out parameter of type 'struct ibv_device_attr_ex *'. Then fill in mlx5
 133  * device attributes from the glue out parameter.
 134  *
 135  * @param dev
 136  *   Pointer to ibv context.
 137  *
 138  * @param device_attr
 139  *   Pointer to mlx5 device attributes.
 140  *
 141  * @return
 142  *   0 on success, non zero error number otherwise
 143  */
 144 int
 145 mlx5_os_get_dev_attr(void *ctx, struct mlx5_dev_attr *device_attr)
 146 {
 147         int err;
 148         struct ibv_device_attr_ex attr_ex;
 149         memset(device_attr, 0, sizeof(*device_attr));
 150         err = mlx5_glue->query_device_ex(ctx, NULL, &attr_ex);
 151         if (err)
 152                 return err;
 153
 154         device_attr->device_cap_flags_ex = attr_ex.device_cap_flags_ex;
 155         device_attr->max_qp_wr = attr_ex.orig_attr.max_qp_wr;
 156         device_attr->max_sge = attr_ex.orig_attr.max_sge;
 157         device_attr->max_cq = attr_ex.orig_attr.max_cq;
 158         device_attr->max_cqe = attr_ex.orig_attr.max_cqe;
 159         device_attr->max_mr = attr_ex.orig_attr.max_mr;
 160         device_attr->max_pd = attr_ex.orig_attr.max_pd;
 161         device_attr->max_qp = attr_ex.orig_attr.max_qp;
 162         device_attr->max_srq = attr_ex.orig_attr.max_srq;
 163         device_attr->max_srq_wr = attr_ex.orig_attr.max_srq_wr;
 164         device_attr->raw_packet_caps = attr_ex.raw_packet_caps;
 165         device_attr->max_rwq_indirection_table_size =
 166                 attr_ex.rss_caps.max_rwq_indirection_table_size;
 167         device_attr->max_tso = attr_ex.tso_caps.max_tso;
 168         device_attr->tso_supported_qpts = attr_ex.tso_caps.supported_qpts;
 169
 170         struct mlx5dv_context dv_attr = { .comp_mask = 0 };
 171         err = mlx5_glue->dv_query_device(ctx, &dv_attr);
 172         if (err)
 173                 return err;
 174
 175         device_attr->flags = dv_attr.flags;
 176         device_attr->comp_mask = dv_attr.comp_mask;
 177 #ifdef HAVE_IBV_MLX5_MOD_SWP
 178         device_attr->sw_parsing_offloads =
 179                 dv_attr.sw_parsing_caps.sw_parsing_offloads;
 180 #endif
 181         device_attr->min_single_stride_log_num_of_bytes =
 182                 dv_attr.striding_rq_caps.min_single_stride_log_num_of_bytes;
 183         device_attr->max_single_stride_log_num_of_bytes =
 184                 dv_attr.striding_rq_caps.max_single_stride_log_num_of_bytes;
 185         device_attr->min_single_wqe_log_num_of_strides =
 186                 dv_attr.striding_rq_caps.min_single_wqe_log_num_of_strides;
 187         device_attr->max_single_wqe_log_num_of_strides =
 188                 dv_attr.striding_rq_caps.max_single_wqe_log_num_of_strides;
 189         device_attr->stride_supported_qpts =
 190                 dv_attr.striding_rq_caps.supported_qpts;
 191 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
 192         device_attr->tunnel_offloads_caps = dv_attr.tunnel_offloads_caps;
 193 #endif
 194         strlcpy(device_attr->fw_ver, attr_ex.orig_attr.fw_ver,
 195                 sizeof(device_attr->fw_ver));
 196
 197         return err;
 198 }
 199
 200 /**
 201  * Verbs callback to allocate a memory. This function should allocate the space
 202  * according to the size provided residing inside a huge page.
 203  * Please note that all allocation must respect the alignment from libmlx5
 204  * (i.e. currently rte_mem_page_size()).
 205  *
 206  * @param[in] size
 207  *   The size in bytes of the memory to allocate.
 208  * @param[in] data
 209  *   A pointer to the callback data.
 210  *
 211  * @return
 212  *   Allocated buffer, NULL otherwise and rte_errno is set.
 213  */
 214 static void *
 215 mlx5_alloc_verbs_buf(size_t size, void *data)
 216 {
 217         struct mlx5_dev_ctx_shared *sh = data;
 218         void *ret;
 219         size_t alignment = rte_mem_page_size();
 220         if (alignment == (size_t)-1) {
 221                 DRV_LOG(ERR, "Failed to get mem page size");
 222                 rte_errno = ENOMEM;
 223                 return NULL;
 224         }
 225
 226         MLX5_ASSERT(data != NULL);
 227         ret = mlx5_malloc(0, size, alignment, sh->numa_node);
 228         if (!ret && size)
 229                 rte_errno = ENOMEM;
 230         return ret;
 231 }
 232
 233 /**
 234  * Detect misc5 support or not
 235  *
 236  * @param[in] priv
 237  *   Device private data pointer
 238  */
 239 #ifdef HAVE_MLX5DV_DR
 240 static void
 241 __mlx5_discovery_misc5_cap(struct mlx5_priv *priv)
 242 {
 243 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
 244         /* Dummy VxLAN matcher to detect rdma-core misc5 cap
 245          * Case: IPv4--->UDP--->VxLAN--->vni
 246          */
 247         void *tbl;
 248         struct mlx5_flow_dv_match_params matcher_mask;
 249         void *match_m;
 250         void *matcher;
 251         void *headers_m;
 252         void *misc5_m;
 253         uint32_t *tunnel_header_m;
 254         struct mlx5dv_flow_matcher_attr dv_attr;
 255
 256         memset(&matcher_mask, 0, sizeof(matcher_mask));
 257         matcher_mask.size = sizeof(matcher_mask.buf);
 258         match_m = matcher_mask.buf;
 259         headers_m = MLX5_ADDR_OF(fte_match_param, match_m, outer_headers);
 260         misc5_m = MLX5_ADDR_OF(fte_match_param,
 261                                match_m, misc_parameters_5);
 262         tunnel_header_m = (uint32_t *)
 263                                 MLX5_ADDR_OF(fte_match_set_misc5,
 264                                 misc5_m, tunnel_header_1);
 265         MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xff);
 266         MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_version, 4);
 267         MLX5_SET(fte_match_set_lyr_2_4, headers_m, udp_dport, 0xffff);
 268         *tunnel_header_m = 0xffffff;
 269
 270         tbl = mlx5_glue->dr_create_flow_tbl(priv->sh->rx_domain, 1);
 271         if (!tbl) {
 272                 DRV_LOG(INFO, "No SW steering support");
 273                 return;
 274         }
 275         dv_attr.type = IBV_FLOW_ATTR_NORMAL,
 276         dv_attr.match_mask = (void *)&matcher_mask,
 277         dv_attr.match_criteria_enable =
 278                         (1 << MLX5_MATCH_CRITERIA_ENABLE_OUTER_BIT) |
 279                         (1 << MLX5_MATCH_CRITERIA_ENABLE_MISC5_BIT);
 280         dv_attr.priority = 3;
 281 #ifdef HAVE_MLX5DV_DR_ESWITCH
 282         void *misc2_m;
 283         if (priv->config.dv_esw_en) {
 284                 /* FDB enabled reg_c_0 */
 285                 dv_attr.match_criteria_enable |=
 286                                 (1 << MLX5_MATCH_CRITERIA_ENABLE_MISC2_BIT);
 287                 misc2_m = MLX5_ADDR_OF(fte_match_param,
 288                                        match_m, misc_parameters_2);
 289                 MLX5_SET(fte_match_set_misc2, misc2_m,
 290                          metadata_reg_c_0, 0xffff);
 291         }
 292 #endif
 293         matcher = mlx5_glue->dv_create_flow_matcher(priv->sh->ctx,
 294                                                     &dv_attr, tbl);
 295         if (matcher) {
 296                 priv->sh->misc5_cap = 1;
 297                 mlx5_glue->dv_destroy_flow_matcher(matcher);
 298         }
 299         mlx5_glue->dr_destroy_flow_tbl(tbl);
 300 #else
 301         RTE_SET_USED(priv);
 302 #endif
 303 }
 304 #endif
 305
 306 /**
 307  * Verbs callback to free a memory.
 308  *
 309  * @param[in] ptr
 310  *   A pointer to the memory to free.
 311  * @param[in] data
 312  *   A pointer to the callback data.
 313  */
 314 static void
 315 mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
 316 {
 317         MLX5_ASSERT(data != NULL);
 318         mlx5_free(ptr);
 319 }
 320
 321 /**
 322  * Initialize DR related data within private structure.
 323  * Routine checks the reference counter and does actual
 324  * resources creation/initialization only if counter is zero.
 325  *
 326  * @param[in] priv
 327  *   Pointer to the private device data structure.
 328  *
 329  * @return
 330  *   Zero on success, positive error code otherwise.
 331  */
 332 static int
 333 mlx5_alloc_shared_dr(struct mlx5_priv *priv)
 334 {
 335         struct mlx5_dev_ctx_shared *sh = priv->sh;
 336         char s[MLX5_NAME_SIZE] __rte_unused;
 337         int err;
 338
 339         MLX5_ASSERT(sh && sh->refcnt);
 340         if (sh->refcnt > 1)
 341                 return 0;
 342         err = mlx5_alloc_table_hash_list(priv);
 343         if (err)
 344                 goto error;
 345         /* The resources below are only valid with DV support. */
 346 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
 347         /* Init port id action list. */
 348         snprintf(s, sizeof(s), "%s_port_id_action_list", sh->ibdev_name);
 349         sh->port_id_action_list = mlx5_list_create(s, sh, true,
 350                                                    flow_dv_port_id_create_cb,
 351                                                    flow_dv_port_id_match_cb,
 352                                                    flow_dv_port_id_remove_cb,
 353                                                    flow_dv_port_id_clone_cb,
 354                                                  flow_dv_port_id_clone_free_cb);
 355         if (!sh->port_id_action_list)
 356                 goto error;
 357         /* Init push vlan action list. */
 358         snprintf(s, sizeof(s), "%s_push_vlan_action_list", sh->ibdev_name);
 359         sh->push_vlan_action_list = mlx5_list_create(s, sh, true,
 360                                                     flow_dv_push_vlan_create_cb,
 361                                                     flow_dv_push_vlan_match_cb,
 362                                                     flow_dv_push_vlan_remove_cb,
 363                                                     flow_dv_push_vlan_clone_cb,
 364                                                flow_dv_push_vlan_clone_free_cb);
 365         if (!sh->push_vlan_action_list)
 366                 goto error;
 367         /* Init sample action list. */
 368         snprintf(s, sizeof(s), "%s_sample_action_list", sh->ibdev_name);
 369         sh->sample_action_list = mlx5_list_create(s, sh, true,
 370                                                   flow_dv_sample_create_cb,
 371                                                   flow_dv_sample_match_cb,
 372                                                   flow_dv_sample_remove_cb,
 373                                                   flow_dv_sample_clone_cb,
 374                                                   flow_dv_sample_clone_free_cb);
 375         if (!sh->sample_action_list)
 376                 goto error;
 377         /* Init dest array action list. */
 378         snprintf(s, sizeof(s), "%s_dest_array_list", sh->ibdev_name);
 379         sh->dest_array_list = mlx5_list_create(s, sh, true,
 380                                                flow_dv_dest_array_create_cb,
 381                                                flow_dv_dest_array_match_cb,
 382                                                flow_dv_dest_array_remove_cb,
 383                                                flow_dv_dest_array_clone_cb,
 384                                               flow_dv_dest_array_clone_free_cb);
 385         if (!sh->dest_array_list)
 386                 goto error;
 387 #endif
 388 #ifdef HAVE_MLX5DV_DR
 389         void *domain;
 390
 391         /* Reference counter is zero, we should initialize structures. */
 392         domain = mlx5_glue->dr_create_domain(sh->ctx,
 393                                              MLX5DV_DR_DOMAIN_TYPE_NIC_RX);
 394         if (!domain) {
 395                 DRV_LOG(ERR, "ingress mlx5dv_dr_create_domain failed");
 396                 err = errno;
 397                 goto error;
 398         }
 399         sh->rx_domain = domain;
 400         domain = mlx5_glue->dr_create_domain(sh->ctx,
 401                                              MLX5DV_DR_DOMAIN_TYPE_NIC_TX);
 402         if (!domain) {
 403                 DRV_LOG(ERR, "egress mlx5dv_dr_create_domain failed");
 404                 err = errno;
 405                 goto error;
 406         }
 407         sh->tx_domain = domain;
 408 #ifdef HAVE_MLX5DV_DR_ESWITCH
 409         if (priv->config.dv_esw_en) {
 410                 domain  = mlx5_glue->dr_create_domain
 411                         (sh->ctx, MLX5DV_DR_DOMAIN_TYPE_FDB);
 412                 if (!domain) {
 413                         DRV_LOG(ERR, "FDB mlx5dv_dr_create_domain failed");
 414                         err = errno;
 415                         goto error;
 416                 }
 417                 sh->fdb_domain = domain;
 418         }
 419         /*
 420          * The drop action is just some dummy placeholder in rdma-core. It
 421          * does not belong to domains and has no any attributes, and, can be
 422          * shared by the entire device.
 423          */
 424         sh->dr_drop_action = mlx5_glue->dr_create_flow_action_drop();
 425         if (!sh->dr_drop_action) {
 426                 DRV_LOG(ERR, "FDB mlx5dv_dr_create_flow_action_drop");
 427                 err = errno;
 428                 goto error;
 429         }
 430 #endif
 431         if (!sh->tunnel_hub && priv->config.dv_miss_info)
 432                 err = mlx5_alloc_tunnel_hub(sh);
 433         if (err) {
 434                 DRV_LOG(ERR, "mlx5_alloc_tunnel_hub failed err=%d", err);
 435                 goto error;
 436         }
 437         if (priv->config.reclaim_mode == MLX5_RCM_AGGR) {
 438                 mlx5_glue->dr_reclaim_domain_memory(sh->rx_domain, 1);
 439                 mlx5_glue->dr_reclaim_domain_memory(sh->tx_domain, 1);
 440                 if (sh->fdb_domain)
 441                         mlx5_glue->dr_reclaim_domain_memory(sh->fdb_domain, 1);
 442         }
 443         sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan();
 444         if (!priv->config.allow_duplicate_pattern) {
 445 #ifndef HAVE_MLX5_DR_ALLOW_DUPLICATE
 446                 DRV_LOG(WARNING, "Disallow duplicate pattern is not supported - maybe old rdma-core version?");
 447 #endif
 448                 mlx5_glue->dr_allow_duplicate_rules(sh->rx_domain, 0);
 449                 mlx5_glue->dr_allow_duplicate_rules(sh->tx_domain, 0);
 450                 if (sh->fdb_domain)
 451                         mlx5_glue->dr_allow_duplicate_rules(sh->fdb_domain, 0);
 452         }
 453
 454         __mlx5_discovery_misc5_cap(priv);
 455 #endif /* HAVE_MLX5DV_DR */
 456         sh->default_miss_action =
 457                         mlx5_glue->dr_create_flow_action_default_miss();
 458         if (!sh->default_miss_action)
 459                 DRV_LOG(WARNING, "Default miss action is not supported.");
 460         return 0;
 461 error:
 462         /* Rollback the created objects. */
 463         if (sh->rx_domain) {
 464                 mlx5_glue->dr_destroy_domain(sh->rx_domain);
 465                 sh->rx_domain = NULL;
 466         }
 467         if (sh->tx_domain) {
 468                 mlx5_glue->dr_destroy_domain(sh->tx_domain);
 469                 sh->tx_domain = NULL;
 470         }
 471         if (sh->fdb_domain) {
 472                 mlx5_glue->dr_destroy_domain(sh->fdb_domain);
 473                 sh->fdb_domain = NULL;
 474         }
 475         if (sh->dr_drop_action) {
 476                 mlx5_glue->destroy_flow_action(sh->dr_drop_action);
 477                 sh->dr_drop_action = NULL;
 478         }
 479         if (sh->pop_vlan_action) {
 480                 mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
 481                 sh->pop_vlan_action = NULL;
 482         }
 483         if (sh->encaps_decaps) {
 484                 mlx5_hlist_destroy(sh->encaps_decaps);
 485                 sh->encaps_decaps = NULL;
 486         }
 487         if (sh->modify_cmds) {
 488                 mlx5_hlist_destroy(sh->modify_cmds);
 489                 sh->modify_cmds = NULL;
 490         }
 491         if (sh->tag_table) {
 492                 /* tags should be destroyed with flow before. */
 493                 mlx5_hlist_destroy(sh->tag_table);
 494                 sh->tag_table = NULL;
 495         }
 496         if (sh->tunnel_hub) {
 497                 mlx5_release_tunnel_hub(sh, priv->dev_port);
 498                 sh->tunnel_hub = NULL;
 499         }
 500         mlx5_free_table_hash_list(priv);
 501         if (sh->port_id_action_list) {
 502                 mlx5_list_destroy(sh->port_id_action_list);
 503                 sh->port_id_action_list = NULL;
 504         }
 505         if (sh->push_vlan_action_list) {
 506                 mlx5_list_destroy(sh->push_vlan_action_list);
 507                 sh->push_vlan_action_list = NULL;
 508         }
 509         if (sh->sample_action_list) {
 510                 mlx5_list_destroy(sh->sample_action_list);
 511                 sh->sample_action_list = NULL;
 512         }
 513         if (sh->dest_array_list) {
 514                 mlx5_list_destroy(sh->dest_array_list);
 515                 sh->dest_array_list = NULL;
 516         }
 517         return err;
 518 }
 519
 520 /**
 521  * Destroy DR related data within private structure.
 522  *
 523  * @param[in] priv
 524  *   Pointer to the private device data structure.
 525  */
 526 void
 527 mlx5_os_free_shared_dr(struct mlx5_priv *priv)
 528 {
 529         struct mlx5_dev_ctx_shared *sh = priv->sh;
 530
 531         MLX5_ASSERT(sh && sh->refcnt);
 532         if (sh->refcnt > 1)
 533                 return;
 534 #ifdef HAVE_MLX5DV_DR
 535         if (sh->rx_domain) {
 536                 mlx5_glue->dr_destroy_domain(sh->rx_domain);
 537                 sh->rx_domain = NULL;
 538         }
 539         if (sh->tx_domain) {
 540                 mlx5_glue->dr_destroy_domain(sh->tx_domain);
 541                 sh->tx_domain = NULL;
 542         }
 543 #ifdef HAVE_MLX5DV_DR_ESWITCH
 544         if (sh->fdb_domain) {
 545                 mlx5_glue->dr_destroy_domain(sh->fdb_domain);
 546                 sh->fdb_domain = NULL;
 547         }
 548         if (sh->dr_drop_action) {
 549                 mlx5_glue->destroy_flow_action(sh->dr_drop_action);
 550                 sh->dr_drop_action = NULL;
 551         }
 552 #endif
 553         if (sh->pop_vlan_action) {
 554                 mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
 555                 sh->pop_vlan_action = NULL;
 556         }
 557 #endif /* HAVE_MLX5DV_DR */
 558         if (sh->default_miss_action)
 559                 mlx5_glue->destroy_flow_action
 560                                 (sh->default_miss_action);
 561         if (sh->encaps_decaps) {
 562                 mlx5_hlist_destroy(sh->encaps_decaps);
 563                 sh->encaps_decaps = NULL;
 564         }
 565         if (sh->modify_cmds) {
 566                 mlx5_hlist_destroy(sh->modify_cmds);
 567                 sh->modify_cmds = NULL;
 568         }
 569         if (sh->tag_table) {
 570                 /* tags should be destroyed with flow before. */
 571                 mlx5_hlist_destroy(sh->tag_table);
 572                 sh->tag_table = NULL;
 573         }
 574         if (sh->tunnel_hub) {
 575                 mlx5_release_tunnel_hub(sh, priv->dev_port);
 576                 sh->tunnel_hub = NULL;
 577         }
 578         mlx5_free_table_hash_list(priv);
 579         if (sh->port_id_action_list) {
 580                 mlx5_list_destroy(sh->port_id_action_list);
 581                 sh->port_id_action_list = NULL;
 582         }
 583         if (sh->push_vlan_action_list) {
 584                 mlx5_list_destroy(sh->push_vlan_action_list);
 585                 sh->push_vlan_action_list = NULL;
 586         }
 587         if (sh->sample_action_list) {
 588                 mlx5_list_destroy(sh->sample_action_list);
 589                 sh->sample_action_list = NULL;
 590         }
 591         if (sh->dest_array_list) {
 592                 mlx5_list_destroy(sh->dest_array_list);
 593                 sh->dest_array_list = NULL;
 594         }
 595 }
 596
 597 /**
 598  * Initialize shared data between primary and secondary process.
 599  *
 600  * A memzone is reserved by primary process and secondary processes attach to
 601  * the memzone.
 602  *
 603  * @return
 604  *   0 on success, a negative errno value otherwise and rte_errno is set.
 605  */
 606 static int
 607 mlx5_init_shared_data(void)
 608 {
 609         const struct rte_memzone *mz;
 610         int ret = 0;
 611
 612         rte_spinlock_lock(&mlx5_shared_data_lock);
 613         if (mlx5_shared_data == NULL) {
 614                 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
 615                         /* Allocate shared memory. */
 616                         mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
 617                                                  sizeof(*mlx5_shared_data),
 618                                                  SOCKET_ID_ANY, 0);
 619                         if (mz == NULL) {
 620                                 DRV_LOG(ERR,
 621                                         "Cannot allocate mlx5 shared data");
 622                                 ret = -rte_errno;
 623                                 goto error;
 624                         }
 625                         mlx5_shared_data = mz->addr;
 626                         memset(mlx5_shared_data, 0, sizeof(*mlx5_shared_data));
 627                         rte_spinlock_init(&mlx5_shared_data->lock);
 628                 } else {
 629                         /* Lookup allocated shared memory. */
 630                         mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
 631                         if (mz == NULL) {
 632                                 DRV_LOG(ERR,
 633                                         "Cannot attach mlx5 shared data");
 634                                 ret = -rte_errno;
 635                                 goto error;
 636                         }
 637                         mlx5_shared_data = mz->addr;
 638                         memset(&mlx5_local_data, 0, sizeof(mlx5_local_data));
 639                 }
 640         }
 641 error:
 642         rte_spinlock_unlock(&mlx5_shared_data_lock);
 643         return ret;
 644 }
 645
 646 /**
 647  * PMD global initialization.
 648  *
 649  * Independent from individual device, this function initializes global
 650  * per-PMD data structures distinguishing primary and secondary processes.
 651  * Hence, each initialization is called once per a process.
 652  *
 653  * @return
 654  *   0 on success, a negative errno value otherwise and rte_errno is set.
 655  */
 656 static int
 657 mlx5_init_once(void)
 658 {
 659         struct mlx5_shared_data *sd;
 660         struct mlx5_local_data *ld = &mlx5_local_data;
 661         int ret = 0;
 662
 663         if (mlx5_init_shared_data())
 664                 return -rte_errno;
 665         sd = mlx5_shared_data;
 666         MLX5_ASSERT(sd);
 667         rte_spinlock_lock(&sd->lock);
 668         switch (rte_eal_process_type()) {
 669         case RTE_PROC_PRIMARY:
 670                 if (sd->init_done)
 671                         break;
 672                 LIST_INIT(&sd->mem_event_cb_list);
 673                 rte_rwlock_init(&sd->mem_event_rwlock);
 674                 rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
 675                                                 mlx5_mr_mem_event_cb, NULL);
 676                 ret = mlx5_mp_init_primary(MLX5_MP_NAME,
 677                                            mlx5_mp_os_primary_handle);
 678                 if (ret)
 679                         goto out;
 680                 sd->init_done = true;
 681                 break;
 682         case RTE_PROC_SECONDARY:
 683                 if (ld->init_done)
 684                         break;
 685                 ret = mlx5_mp_init_secondary(MLX5_MP_NAME,
 686                                              mlx5_mp_os_secondary_handle);
 687                 if (ret)
 688                         goto out;
 689                 ++sd->secondary_cnt;
 690                 ld->init_done = true;
 691                 break;
 692         default:
 693                 break;
 694         }
 695 out:
 696         rte_spinlock_unlock(&sd->lock);
 697         return ret;
 698 }
 699
 700 /**
 701  * Create the Tx queue DevX/Verbs object.
 702  *
 703  * @param dev
 704  *   Pointer to Ethernet device.
 705  * @param idx
 706  *   Queue index in DPDK Tx queue array.
 707  *
 708  * @return
 709  *   0 on success, a negative errno value otherwise and rte_errno is set.
 710  */
 711 static int
 712 mlx5_os_txq_obj_new(struct rte_eth_dev *dev, uint16_t idx)
 713 {
 714         struct mlx5_priv *priv = dev->data->dev_private;
 715         struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
 716         struct mlx5_txq_ctrl *txq_ctrl =
 717                         container_of(txq_data, struct mlx5_txq_ctrl, txq);
 718
 719         if (txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN)
 720                 return mlx5_txq_devx_obj_new(dev, idx);
 721 #ifdef HAVE_MLX5DV_DEVX_UAR_OFFSET
 722         if (!priv->config.dv_esw_en)
 723                 return mlx5_txq_devx_obj_new(dev, idx);
 724 #endif
 725         return mlx5_txq_ibv_obj_new(dev, idx);
 726 }
 727
 728 /**
 729  * Release an Tx DevX/verbs queue object.
 730  *
 731  * @param txq_obj
 732  *   DevX/Verbs Tx queue object.
 733  */
 734 static void
 735 mlx5_os_txq_obj_release(struct mlx5_txq_obj *txq_obj)
 736 {
 737         if (txq_obj->txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN) {
 738                 mlx5_txq_devx_obj_release(txq_obj);
 739                 return;
 740         }
 741 #ifdef HAVE_MLX5DV_DEVX_UAR_OFFSET
 742         if (!txq_obj->txq_ctrl->priv->config.dv_esw_en) {
 743                 mlx5_txq_devx_obj_release(txq_obj);
 744                 return;
 745         }
 746 #endif
 747         mlx5_txq_ibv_obj_release(txq_obj);
 748 }
 749
 750 /**
 751  * DV flow counter mode detect and config.
 752  *
 753  * @param dev
 754  *   Pointer to rte_eth_dev structure.
 755  *
 756  */
 757 static void
 758 mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
 759 {
 760 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
 761         struct mlx5_priv *priv = dev->data->dev_private;
 762         struct mlx5_dev_ctx_shared *sh = priv->sh;
 763         bool fallback;
 764
 765 #ifndef HAVE_IBV_DEVX_ASYNC
 766         fallback = true;
 767 #else
 768         fallback = false;
 769         if (!priv->config.devx || !priv->config.dv_flow_en ||
 770             !priv->config.hca_attr.flow_counters_dump ||
 771             !(priv->config.hca_attr.flow_counter_bulk_alloc_bitmap & 0x4) ||
 772             (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
 773                 fallback = true;
 774 #endif
 775         if (fallback)
 776                 DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
 777                         "counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
 778                         priv->config.hca_attr.flow_counters_dump,
 779                         priv->config.hca_attr.flow_counter_bulk_alloc_bitmap);
 780         /* Initialize fallback mode only on the port initializes sh. */
 781         if (sh->refcnt == 1)
 782                 sh->cmng.counter_fallback = fallback;
 783         else if (fallback != sh->cmng.counter_fallback)
 784                 DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
 785                         "with others:%d.", PORT_ID(priv), fallback);
 786 #endif
 787 }
 788
 789 /**
 790  * DR flow drop action support detect.
 791  *
 792  * @param dev
 793  *   Pointer to rte_eth_dev structure.
 794  *
 795  */
 796 static void
 797 mlx5_flow_drop_action_config(struct rte_eth_dev *dev __rte_unused)
 798 {
 799 #ifdef HAVE_MLX5DV_DR
 800         struct mlx5_priv *priv = dev->data->dev_private;
 801
 802         if (!priv->config.dv_flow_en || !priv->sh->dr_drop_action)
 803                 return;
 804         /**
 805          * DR supports drop action placeholder when it is supported;
 806          * otherwise, use the queue drop action.
 807          */
 808         if (mlx5_flow_discover_dr_action_support(dev))
 809                 priv->root_drop_action = priv->drop_queue.hrxq->action;
 810         else
 811                 priv->root_drop_action = priv->sh->dr_drop_action;
 812 #endif
 813 }
 814
 815 static void
 816 mlx5_queue_counter_id_prepare(struct rte_eth_dev *dev)
 817 {
 818         struct mlx5_priv *priv = dev->data->dev_private;
 819         void *ctx = priv->sh->ctx;
 820
 821         priv->q_counters = mlx5_devx_cmd_queue_counter_alloc(ctx);
 822         if (!priv->q_counters) {
 823                 struct ibv_cq *cq = mlx5_glue->create_cq(ctx, 1, NULL, NULL, 0);
 824                 struct ibv_wq *wq;
 825
 826                 DRV_LOG(DEBUG, "Port %d queue counter object cannot be created "
 827                         "by DevX - fall-back to use the kernel driver global "
 828                         "queue counter.", dev->data->port_id);
 829                 /* Create WQ by kernel and query its queue counter ID. */
 830                 if (cq) {
 831                         wq = mlx5_glue->create_wq(ctx,
 832                                                   &(struct ibv_wq_init_attr){
 833                                                     .wq_type = IBV_WQT_RQ,
 834                                                     .max_wr = 1,
 835                                                     .max_sge = 1,
 836                                                     .pd = priv->sh->pd,
 837                                                     .cq = cq,
 838                                                 });
 839                         if (wq) {
 840                                 /* Counter is assigned only on RDY state. */
 841                                 int ret = mlx5_glue->modify_wq(wq,
 842                                                  &(struct ibv_wq_attr){
 843                                                  .attr_mask = IBV_WQ_ATTR_STATE,
 844                                                  .wq_state = IBV_WQS_RDY,
 845                                                 });
 846
 847                                 if (ret == 0)
 848                                         mlx5_devx_cmd_wq_query(wq,
 849                                                          &priv->counter_set_id);
 850                                 claim_zero(mlx5_glue->destroy_wq(wq));
 851                         }
 852                         claim_zero(mlx5_glue->destroy_cq(cq));
 853                 }
 854         } else {
 855                 priv->counter_set_id = priv->q_counters->id;
 856         }
 857         if (priv->counter_set_id == 0)
 858                 DRV_LOG(INFO, "Part of the port %d statistics will not be "
 859                         "available.", dev->data->port_id);
 860 }
 861
 862 /**
 863  * Check if representor spawn info match devargs.
 864  *
 865  * @param spawn
 866  *   Verbs device parameters (name, port, switch_info) to spawn.
 867  * @param eth_da
 868  *   Device devargs to probe.
 869  *
 870  * @return
 871  *   Match result.
 872  */
 873 static bool
 874 mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
 875                        struct rte_eth_devargs *eth_da)
 876 {
 877         struct mlx5_switch_info *switch_info = &spawn->info;
 878         unsigned int p, f;
 879         uint16_t id;
 880         uint16_t repr_id = mlx5_representor_id_encode(switch_info,
 881                                                       eth_da->type);
 882
 883         switch (eth_da->type) {
 884         case RTE_ETH_REPRESENTOR_SF:
 885                 if (!(spawn->info.port_name == -1 &&
 886                       switch_info->name_type ==
 887                                 MLX5_PHYS_PORT_NAME_TYPE_PFHPF) &&
 888                     switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFSF) {
 889                         rte_errno = EBUSY;
 890                         return false;
 891                 }
 892                 break;
 893         case RTE_ETH_REPRESENTOR_VF:
 894                 /* Allows HPF representor index -1 as exception. */
 895                 if (!(spawn->info.port_name == -1 &&
 896                       switch_info->name_type ==
 897                                 MLX5_PHYS_PORT_NAME_TYPE_PFHPF) &&
 898                     switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFVF) {
 899                         rte_errno = EBUSY;
 900                         return false;
 901                 }
 902                 break;
 903         case RTE_ETH_REPRESENTOR_NONE:
 904                 rte_errno = EBUSY;
 905                 return false;
 906         default:
 907                 rte_errno = ENOTSUP;
 908                 DRV_LOG(ERR, "unsupported representor type");
 909                 return false;
 910         }
 911         /* Check representor ID: */
 912         for (p = 0; p < eth_da->nb_ports; ++p) {
 913                 if (spawn->pf_bond < 0) {
 914                         /* For non-LAG mode, allow and ignore pf. */
 915                         switch_info->pf_num = eth_da->ports[p];
 916                         repr_id = mlx5_representor_id_encode(switch_info,
 917                                                              eth_da->type);
 918                 }
 919                 for (f = 0; f < eth_da->nb_representor_ports; ++f) {
 920                         id = MLX5_REPRESENTOR_ID
 921                                 (eth_da->ports[p], eth_da->type,
 922                                  eth_da->representor_ports[f]);
 923                         if (repr_id == id)
 924                                 return true;
 925                 }
 926         }
 927         rte_errno = EBUSY;
 928         return false;
 929 }
 930
 931
 932 /**
 933  * Spawn an Ethernet device from Verbs information.
 934  *
 935  * @param dpdk_dev
 936  *   Backing DPDK device.
 937  * @param spawn
 938  *   Verbs device parameters (name, port, switch_info) to spawn.
 939  * @param config
 940  *   Device configuration parameters.
 941  * @param config
 942  *   Device arguments.
 943  *
 944  * @return
 945  *   A valid Ethernet device object on success, NULL otherwise and rte_errno
 946  *   is set. The following errors are defined:
 947  *
 948  *   EBUSY: device is not supposed to be spawned.
 949  *   EEXIST: device is already spawned
 950  */
 951 static struct rte_eth_dev *
 952 mlx5_dev_spawn(struct rte_device *dpdk_dev,
 953                struct mlx5_dev_spawn_data *spawn,
 954                struct mlx5_dev_config *config,
 955                struct rte_eth_devargs *eth_da)
 956 {
 957         const struct mlx5_switch_info *switch_info = &spawn->info;
 958         struct mlx5_dev_ctx_shared *sh = NULL;
 959         struct ibv_port_attr port_attr;
 960         struct mlx5dv_context dv_attr = { .comp_mask = 0 };
 961         struct rte_eth_dev *eth_dev = NULL;
 962         struct mlx5_priv *priv = NULL;
 963         int err = 0;
 964         unsigned int hw_padding = 0;
 965         unsigned int mps;
 966         unsigned int tunnel_en = 0;
 967         unsigned int mpls_en = 0;
 968         unsigned int swp = 0;
 969         unsigned int mprq = 0;
 970         unsigned int mprq_min_stride_size_n = 0;
 971         unsigned int mprq_max_stride_size_n = 0;
 972         unsigned int mprq_min_stride_num_n = 0;
 973         unsigned int mprq_max_stride_num_n = 0;
 974         struct rte_ether_addr mac;
 975         char name[RTE_ETH_NAME_MAX_LEN];
 976         int own_domain_id = 0;
 977         uint16_t port_id;
 978         struct mlx5_port_info vport_info = { .query_flags = 0 };
 979         int i;
 980
 981         /* Determine if this port representor is supposed to be spawned. */
 982         if (switch_info->representor && dpdk_dev->devargs &&
 983             !mlx5_representor_match(spawn, eth_da))
 984                 return NULL;
 985         /* Build device name. */
 986         if (spawn->pf_bond < 0) {
 987                 /* Single device. */
 988                 if (!switch_info->representor)
 989                         strlcpy(name, dpdk_dev->name, sizeof(name));
 990                 else
 991                         err = snprintf(name, sizeof(name), "%s_representor_%s%u",
 992                                  dpdk_dev->name,
 993                                  switch_info->name_type ==
 994                                  MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
 995                                  switch_info->port_name);
 996         } else {
 997                 /* Bonding device. */
 998                 if (!switch_info->representor) {
 999                         err = snprintf(name, sizeof(name), "%s_%s",
1000                                  dpdk_dev->name,
1001                                  mlx5_os_get_dev_device_name(spawn->phys_dev));
1002                 } else {
1003                         err = snprintf(name, sizeof(name), "%s_%s_representor_c%dpf%d%s%u",
1004                                 dpdk_dev->name,
1005                                 mlx5_os_get_dev_device_name(spawn->phys_dev),
1006                                 switch_info->ctrl_num,
1007                                 switch_info->pf_num,
1008                                 switch_info->name_type ==
1009                                 MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
1010                                 switch_info->port_name);
1011                 }
1012         }
1013         if (err >= (int)sizeof(name))
1014                 DRV_LOG(WARNING, "device name overflow %s", name);
1015         /* check if the device is already spawned */
1016         if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
1017                 rte_errno = EEXIST;
1018                 return NULL;
1019         }
1020         DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
1021         if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
1022                 struct mlx5_mp_id mp_id;
1023
1024                 eth_dev = rte_eth_dev_attach_secondary(name);
1025                 if (eth_dev == NULL) {
1026                         DRV_LOG(ERR, "can not attach rte ethdev");
1027                         rte_errno = ENOMEM;
1028                         return NULL;
1029                 }
1030                 eth_dev->device = dpdk_dev;
1031                 eth_dev->dev_ops = &mlx5_dev_sec_ops;
1032                 eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
1033                 eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
1034                 err = mlx5_proc_priv_init(eth_dev);
1035                 if (err)
1036                         return NULL;
1037                 mp_id.port_id = eth_dev->data->port_id;
1038                 strlcpy(mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
1039                 /* Receive command fd from primary process */
1040                 err = mlx5_mp_req_verbs_cmd_fd(&mp_id);
1041                 if (err < 0)
1042                         goto err_secondary;
1043                 /* Remap UAR for Tx queues. */
1044                 err = mlx5_tx_uar_init_secondary(eth_dev, err);
1045                 if (err)
1046                         goto err_secondary;
1047                 /*
1048                  * Ethdev pointer is still required as input since
1049                  * the primary device is not accessible from the
1050                  * secondary process.
1051                  */
1052                 eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev);
1053                 eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
1054                 return eth_dev;
1055 err_secondary:
1056                 mlx5_dev_close(eth_dev);
1057                 return NULL;
1058         }
1059         /*
1060          * Some parameters ("tx_db_nc" in particularly) are needed in
1061          * advance to create dv/verbs device context. We proceed the
1062          * devargs here to get ones, and later proceed devargs again
1063          * to override some hardware settings.
1064          */
1065         err = mlx5_args(config, dpdk_dev->devargs);
1066         if (err) {
1067                 err = rte_errno;
1068                 DRV_LOG(ERR, "failed to process device arguments: %s",
1069                         strerror(rte_errno));
1070                 goto error;
1071         }
1072         if (config->dv_miss_info) {
1073                 if (switch_info->master || switch_info->representor)
1074                         config->dv_xmeta_en = MLX5_XMETA_MODE_META16;
1075         }
1076         mlx5_malloc_mem_select(config->sys_mem_en);
1077         sh = mlx5_alloc_shared_dev_ctx(spawn, config);
1078         if (!sh)
1079                 return NULL;
1080         config->devx = sh->devx;
1081 #ifdef HAVE_MLX5DV_DR_ACTION_DEST_DEVX_TIR
1082         config->dest_tir = 1;
1083 #endif
1084 #ifdef HAVE_IBV_MLX5_MOD_SWP
1085         dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
1086 #endif
1087         /*
1088          * Multi-packet send is supported by ConnectX-4 Lx PF as well
1089          * as all ConnectX-5 devices.
1090          */
1091 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1092         dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
1093 #endif
1094 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
1095         dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ;
1096 #endif
1097         mlx5_glue->dv_query_device(sh->ctx, &dv_attr);
1098         if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
1099                 if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
1100                         DRV_LOG(DEBUG, "enhanced MPW is supported");
1101                         mps = MLX5_MPW_ENHANCED;
1102                 } else {
1103                         DRV_LOG(DEBUG, "MPW is supported");
1104                         mps = MLX5_MPW;
1105                 }
1106         } else {
1107                 DRV_LOG(DEBUG, "MPW isn't supported");
1108                 mps = MLX5_MPW_DISABLED;
1109         }
1110 #ifdef HAVE_IBV_MLX5_MOD_SWP
1111         if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
1112                 swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
1113         DRV_LOG(DEBUG, "SWP support: %u", swp);
1114 #endif
1115         config->swp = !!swp;
1116 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
1117         if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
1118                 struct mlx5dv_striding_rq_caps mprq_caps =
1119                         dv_attr.striding_rq_caps;
1120
1121                 DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d",
1122                         mprq_caps.min_single_stride_log_num_of_bytes);
1123                 DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d",
1124                         mprq_caps.max_single_stride_log_num_of_bytes);
1125                 DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d",
1126                         mprq_caps.min_single_wqe_log_num_of_strides);
1127                 DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d",
1128                         mprq_caps.max_single_wqe_log_num_of_strides);
1129                 DRV_LOG(DEBUG, "\tsupported_qpts: %d",
1130                         mprq_caps.supported_qpts);
1131                 DRV_LOG(DEBUG, "device supports Multi-Packet RQ");
1132                 mprq = 1;
1133                 mprq_min_stride_size_n =
1134                         mprq_caps.min_single_stride_log_num_of_bytes;
1135                 mprq_max_stride_size_n =
1136                         mprq_caps.max_single_stride_log_num_of_bytes;
1137                 mprq_min_stride_num_n =
1138                         mprq_caps.min_single_wqe_log_num_of_strides;
1139                 mprq_max_stride_num_n =
1140                         mprq_caps.max_single_wqe_log_num_of_strides;
1141         }
1142 #endif
1143         /* Rx CQE compression is enabled by default. */
1144         config->cqe_comp = 1;
1145 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1146         if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
1147                 tunnel_en = ((dv_attr.tunnel_offloads_caps &
1148                               MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
1149                              (dv_attr.tunnel_offloads_caps &
1150                               MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE) &&
1151                              (dv_attr.tunnel_offloads_caps &
1152                               MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GENEVE));
1153         }
1154         DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
1155                 tunnel_en ? "" : "not ");
1156 #else
1157         DRV_LOG(WARNING,
1158                 "tunnel offloading disabled due to old OFED/rdma-core version");
1159 #endif
1160         config->tunnel_en = tunnel_en;
1161 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
1162         mpls_en = ((dv_attr.tunnel_offloads_caps &
1163                     MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
1164                    (dv_attr.tunnel_offloads_caps &
1165                     MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP));
1166         DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported",
1167                 mpls_en ? "" : "not ");
1168 #else
1169         DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
1170                 " old OFED/rdma-core version or firmware configuration");
1171 #endif
1172         config->mpls_en = mpls_en;
1173         /* Check port status. */
1174         err = mlx5_glue->query_port(sh->ctx, spawn->phys_port, &port_attr);
1175         if (err) {
1176                 DRV_LOG(ERR, "port query failed: %s", strerror(err));
1177                 goto error;
1178         }
1179         if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
1180                 DRV_LOG(ERR, "port is not configured in Ethernet mode");
1181                 err = EINVAL;
1182                 goto error;
1183         }
1184         if (port_attr.state != IBV_PORT_ACTIVE)
1185                 DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
1186                         mlx5_glue->port_state_str(port_attr.state),
1187                         port_attr.state);
1188         /* Allocate private eth device data. */
1189         priv = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
1190                            sizeof(*priv),
1191                            RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
1192         if (priv == NULL) {
1193                 DRV_LOG(ERR, "priv allocation failure");
1194                 err = ENOMEM;
1195                 goto error;
1196         }
1197         priv->sh = sh;
1198         priv->dev_port = spawn->phys_port;
1199         priv->pci_dev = spawn->pci_dev;
1200         priv->mtu = RTE_ETHER_MTU;
1201         /* Some internal functions rely on Netlink sockets, open them now. */
1202         priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
1203         priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
1204         priv->representor = !!switch_info->representor;
1205         priv->master = !!switch_info->master;
1206         priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
1207         priv->vport_meta_tag = 0;
1208         priv->vport_meta_mask = 0;
1209         priv->pf_bond = spawn->pf_bond;
1210
1211         DRV_LOG(DEBUG,
1212                 "dev_port=%u bus=%s pci=%s master=%d representor=%d pf_bond=%d\n",
1213                 priv->dev_port, dpdk_dev->bus->name,
1214                 priv->pci_dev ? priv->pci_dev->name : "NONE",
1215                 priv->master, priv->representor, priv->pf_bond);
1216
1217         /*
1218          * If we have E-Switch we should determine the vport attributes.
1219          * E-Switch may use either source vport field or reg_c[0] metadata
1220          * register to match on vport index. The engaged part of metadata
1221          * register is defined by mask.
1222          */
1223         if (switch_info->representor || switch_info->master) {
1224                 err = mlx5_glue->devx_port_query(sh->ctx,
1225                                                  spawn->phys_port,
1226                                                  &vport_info);
1227                 if (err) {
1228                         DRV_LOG(WARNING,
1229                                 "can't query devx port %d on device %s",
1230                                 spawn->phys_port,
1231                                 mlx5_os_get_dev_device_name(spawn->phys_dev));
1232                         vport_info.query_flags = 0;
1233                 }
1234         }
1235         if (vport_info.query_flags & MLX5_PORT_QUERY_REG_C0) {
1236                 priv->vport_meta_tag = vport_info.vport_meta_tag;
1237                 priv->vport_meta_mask = vport_info.vport_meta_mask;
1238                 if (!priv->vport_meta_mask) {
1239                         DRV_LOG(ERR, "vport zero mask for port %d"
1240                                      " on bonding device %s",
1241                                      spawn->phys_port,
1242                                      mlx5_os_get_dev_device_name
1243                                                         (spawn->phys_dev));
1244                         err = ENOTSUP;
1245                         goto error;
1246                 }
1247                 if (priv->vport_meta_tag & ~priv->vport_meta_mask) {
1248                         DRV_LOG(ERR, "invalid vport tag for port %d"
1249                                      " on bonding device %s",
1250                                      spawn->phys_port,
1251                                      mlx5_os_get_dev_device_name
1252                                                         (spawn->phys_dev));
1253                         err = ENOTSUP;
1254                         goto error;
1255                 }
1256         }
1257         if (vport_info.query_flags & MLX5_PORT_QUERY_VPORT) {
1258                 priv->vport_id = vport_info.vport_id;
1259         } else if (spawn->pf_bond >= 0 &&
1260                    (switch_info->representor || switch_info->master)) {
1261                 DRV_LOG(ERR, "can't deduce vport index for port %d"
1262                              " on bonding device %s",
1263                              spawn->phys_port,
1264                              mlx5_os_get_dev_device_name(spawn->phys_dev));
1265                 err = ENOTSUP;
1266                 goto error;
1267         } else {
1268                 /*
1269                  * Suppose vport index in compatible way. Kernel/rdma_core
1270                  * support single E-Switch per PF configurations only and
1271                  * vport_id field contains the vport index for associated VF,
1272                  * which is deduced from representor port name.
1273                  * For example, let's have the IB device port 10, it has
1274                  * attached network device eth0, which has port name attribute
1275                  * pf0vf2, we can deduce the VF number as 2, and set vport index
1276                  * as 3 (2+1). This assigning schema should be changed if the
1277                  * multiple E-Switch instances per PF configurations or/and PCI
1278                  * subfunctions are added.
1279                  */
1280                 priv->vport_id = switch_info->representor ?
1281                                  switch_info->port_name + 1 : -1;
1282         }
1283         priv->representor_id = mlx5_representor_id_encode(switch_info,
1284                                                           eth_da->type);
1285         /*
1286          * Look for sibling devices in order to reuse their switch domain
1287          * if any, otherwise allocate one.
1288          */
1289         MLX5_ETH_FOREACH_DEV(port_id, dpdk_dev) {
1290                 const struct mlx5_priv *opriv =
1291                         rte_eth_devices[port_id].data->dev_private;
1292
1293                 if (!opriv ||
1294                     opriv->sh != priv->sh ||
1295                         opriv->domain_id ==
1296                         RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
1297                         continue;
1298                 priv->domain_id = opriv->domain_id;
1299                 DRV_LOG(DEBUG, "dev_port-%u inherit domain_id=%u\n",
1300                         priv->dev_port, priv->domain_id);
1301                 break;
1302         }
1303         if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
1304                 err = rte_eth_switch_domain_alloc(&priv->domain_id);
1305                 if (err) {
1306                         err = rte_errno;
1307                         DRV_LOG(ERR, "unable to allocate switch domain: %s",
1308                                 strerror(rte_errno));
1309                         goto error;
1310                 }
1311                 own_domain_id = 1;
1312                 DRV_LOG(DEBUG, "dev_port-%u new domain_id=%u\n",
1313                         priv->dev_port, priv->domain_id);
1314         }
1315         /* Override some values set by hardware configuration. */
1316         mlx5_args(config, dpdk_dev->devargs);
1317         err = mlx5_dev_check_sibling_config(priv, config);
1318         if (err)
1319                 goto error;
1320         config->hw_csum = !!(sh->device_attr.device_cap_flags_ex &
1321                             IBV_DEVICE_RAW_IP_CSUM);
1322         DRV_LOG(DEBUG, "checksum offloading is %ssupported",
1323                 (config->hw_csum ? "" : "not "));
1324 #if !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42) && \
1325         !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
1326         DRV_LOG(DEBUG, "counters are not supported");
1327 #endif
1328 #if !defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_MLX5DV_DR)
1329         if (config->dv_flow_en) {
1330                 DRV_LOG(WARNING, "DV flow is not supported");
1331                 config->dv_flow_en = 0;
1332         }
1333 #endif
1334         if (spawn->max_port > UINT8_MAX) {
1335                 /* Verbs can't support ports larger than 255 by design. */
1336                 DRV_LOG(ERR, "can't support IB ports > UINT8_MAX");
1337                 err = EINVAL;
1338                 goto error;
1339         }
1340         config->ind_table_max_size =
1341                 sh->device_attr.max_rwq_indirection_table_size;
1342         /*
1343          * Remove this check once DPDK supports larger/variable
1344          * indirection tables.
1345          */
1346         if (config->ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
1347                 config->ind_table_max_size = ETH_RSS_RETA_SIZE_512;
1348         DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
1349                 config->ind_table_max_size);
1350         config->hw_vlan_strip = !!(sh->device_attr.raw_packet_caps &
1351                                   IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
1352         DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
1353                 (config->hw_vlan_strip ? "" : "not "));
1354         config->hw_fcs_strip = !!(sh->device_attr.raw_packet_caps &
1355                                  IBV_RAW_PACKET_CAP_SCATTER_FCS);
1356 #if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING)
1357         hw_padding = !!sh->device_attr.rx_pad_end_addr_align;
1358 #elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING)
1359         hw_padding = !!(sh->device_attr.device_cap_flags_ex &
1360                         IBV_DEVICE_PCI_WRITE_END_PADDING);
1361 #endif
1362         if (config->hw_padding && !hw_padding) {
1363                 DRV_LOG(DEBUG, "Rx end alignment padding isn't supported");
1364                 config->hw_padding = 0;
1365         } else if (config->hw_padding) {
1366                 DRV_LOG(DEBUG, "Rx end alignment padding is enabled");
1367         }
1368         config->tso = (sh->device_attr.max_tso > 0 &&
1369                       (sh->device_attr.tso_supported_qpts &
1370                        (1 << IBV_QPT_RAW_PACKET)));
1371         if (config->tso)
1372                 config->tso_max_payload_sz = sh->device_attr.max_tso;
1373         /*
1374          * MPW is disabled by default, while the Enhanced MPW is enabled
1375          * by default.
1376          */
1377         if (config->mps == MLX5_ARG_UNSET)
1378                 config->mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED :
1379                                                           MLX5_MPW_DISABLED;
1380         else
1381                 config->mps = config->mps ? mps : MLX5_MPW_DISABLED;
1382         DRV_LOG(INFO, "%sMPS is %s",
1383                 config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
1384                 config->mps == MLX5_MPW ? "legacy " : "",
1385                 config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
1386         if (config->devx) {
1387                 err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config->hca_attr);
1388                 if (err) {
1389                         err = -err;
1390                         goto error;
1391                 }
1392                 /* Check relax ordering support. */
1393                 if (!haswell_broadwell_cpu) {
1394                         sh->cmng.relaxed_ordering_write =
1395                                 config->hca_attr.relaxed_ordering_write;
1396                         sh->cmng.relaxed_ordering_read =
1397                                 config->hca_attr.relaxed_ordering_read;
1398                 } else {
1399                         sh->cmng.relaxed_ordering_read = 0;
1400                         sh->cmng.relaxed_ordering_write = 0;
1401                 }
1402                 sh->rq_ts_format = config->hca_attr.rq_ts_format;
1403                 sh->sq_ts_format = config->hca_attr.sq_ts_format;
1404                 sh->steering_format_version =
1405                         config->hca_attr.steering_format_version;
1406                 sh->qp_ts_format = config->hca_attr.qp_ts_format;
1407                 /* Check for LRO support. */
1408                 if (config->dest_tir && config->hca_attr.lro_cap &&
1409                     config->dv_flow_en) {
1410                         /* TBD check tunnel lro caps. */
1411                         config->lro.supported = config->hca_attr.lro_cap;
1412                         DRV_LOG(DEBUG, "Device supports LRO");
1413                         /*
1414                          * If LRO timeout is not configured by application,
1415                          * use the minimal supported value.
1416                          */
1417                         if (!config->lro.timeout)
1418                                 config->lro.timeout =
1419                                 config->hca_attr.lro_timer_supported_periods[0];
1420                         DRV_LOG(DEBUG, "LRO session timeout set to %d usec",
1421                                 config->lro.timeout);
1422                         DRV_LOG(DEBUG, "LRO minimal size of TCP segment "
1423                                 "required for coalescing is %d bytes",
1424                                 config->hca_attr.lro_min_mss_size);
1425                 }
1426 #if defined(HAVE_MLX5DV_DR) && \
1427         (defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_METER) || \
1428          defined(HAVE_MLX5_DR_CREATE_ACTION_ASO))
1429                 if (config->hca_attr.qos.sup &&
1430                     config->hca_attr.qos.flow_meter_old &&
1431                     config->dv_flow_en) {
1432                         uint8_t reg_c_mask =
1433                                 config->hca_attr.qos.flow_meter_reg_c_ids;
1434                         /*
1435                          * Meter needs two REG_C's for color match and pre-sfx
1436                          * flow match. Here get the REG_C for color match.
1437                          * REG_C_0 and REG_C_1 is reserved for metadata feature.
1438                          */
1439                         reg_c_mask &= 0xfc;
1440                         if (__builtin_popcount(reg_c_mask) < 1) {
1441                                 priv->mtr_en = 0;
1442                                 DRV_LOG(WARNING, "No available register for"
1443                                         " meter.");
1444                         } else {
1445                                 /*
1446                                  * The meter color register is used by the
1447                                  * flow-hit feature as well.
1448                                  * The flow-hit feature must use REG_C_3
1449                                  * Prefer REG_C_3 if it is available.
1450                                  */
1451                                 if (reg_c_mask & (1 << (REG_C_3 - REG_C_0)))
1452                                         priv->mtr_color_reg = REG_C_3;
1453                                 else
1454                                         priv->mtr_color_reg = ffs(reg_c_mask)
1455                                                               - 1 + REG_C_0;
1456                                 priv->mtr_en = 1;
1457                                 priv->mtr_reg_share =
1458                                       config->hca_attr.qos.flow_meter;
1459                                 DRV_LOG(DEBUG, "The REG_C meter uses is %d",
1460                                         priv->mtr_color_reg);
1461                         }
1462                 }
1463                 if (config->hca_attr.qos.sup &&
1464                         config->hca_attr.qos.flow_meter_aso_sup) {
1465                         uint32_t log_obj_size =
1466                                 rte_log2_u32(MLX5_ASO_MTRS_PER_POOL >> 1);
1467                         if (log_obj_size >=
1468                         config->hca_attr.qos.log_meter_aso_granularity &&
1469                         log_obj_size <=
1470                         config->hca_attr.qos.log_meter_aso_max_alloc)
1471                                 sh->meter_aso_en = 1;
1472                 }
1473                 if (priv->mtr_en) {
1474                         err = mlx5_aso_flow_mtrs_mng_init(priv->sh);
1475                         if (err) {
1476                                 err = -err;
1477                                 goto error;
1478                         }
1479                 }
1480                 if (config->hca_attr.flow.tunnel_header_0_1)
1481                         sh->tunnel_header_0_1 = 1;
1482 #endif
1483 #ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
1484                 if (config->hca_attr.flow_hit_aso &&
1485                     priv->mtr_color_reg == REG_C_3) {
1486                         sh->flow_hit_aso_en = 1;
1487                         err = mlx5_flow_aso_age_mng_init(sh);
1488                         if (err) {
1489                                 err = -err;
1490                                 goto error;
1491                         }
1492                         DRV_LOG(DEBUG, "Flow Hit ASO is supported.");
1493                 }
1494 #endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
1495 #if defined(HAVE_MLX5_DR_CREATE_ACTION_ASO) && \
1496         defined(HAVE_MLX5_DR_ACTION_ASO_CT)
1497                 if (config->hca_attr.ct_offload &&
1498                     priv->mtr_color_reg == REG_C_3) {
1499                         err = mlx5_flow_aso_ct_mng_init(sh);
1500                         if (err) {
1501                                 err = -err;
1502                                 goto error;
1503                         }
1504                         DRV_LOG(DEBUG, "CT ASO is supported.");
1505                         sh->ct_aso_en = 1;
1506                 }
1507 #endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO && HAVE_MLX5_DR_ACTION_ASO_CT */
1508 #if defined(HAVE_MLX5DV_DR) && defined(HAVE_MLX5_DR_CREATE_ACTION_FLOW_SAMPLE)
1509                 if (config->hca_attr.log_max_ft_sampler_num > 0  &&
1510                     config->dv_flow_en) {
1511                         priv->sampler_en = 1;
1512                         DRV_LOG(DEBUG, "Sampler enabled!");
1513                 } else {
1514                         priv->sampler_en = 0;
1515                         if (!config->hca_attr.log_max_ft_sampler_num)
1516                                 DRV_LOG(WARNING,
1517                                         "No available register for sampler.");
1518                         else
1519                                 DRV_LOG(DEBUG, "DV flow is not supported!");
1520                 }
1521 #endif
1522         }
1523         if (config->cqe_comp && RTE_CACHE_LINE_SIZE == 128 &&
1524             !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP)) {
1525                 DRV_LOG(WARNING, "Rx CQE 128B compression is not supported");
1526                 config->cqe_comp = 0;
1527         }
1528         if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
1529             (!config->devx || !config->hca_attr.mini_cqe_resp_flow_tag)) {
1530                 DRV_LOG(WARNING, "Flow Tag CQE compression"
1531                                  " format isn't supported.");
1532                 config->cqe_comp = 0;
1533         }
1534         if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
1535             (!config->devx || !config->hca_attr.mini_cqe_resp_l3_l4_tag)) {
1536                 DRV_LOG(WARNING, "L3/L4 Header CQE compression"
1537                                  " format isn't supported.");
1538                 config->cqe_comp = 0;
1539         }
1540         DRV_LOG(DEBUG, "Rx CQE compression is %ssupported",
1541                         config->cqe_comp ? "" : "not ");
1542         if (config->tx_pp) {
1543                 DRV_LOG(DEBUG, "Timestamp counter frequency %u kHz",
1544                         config->hca_attr.dev_freq_khz);
1545                 DRV_LOG(DEBUG, "Packet pacing is %ssupported",
1546                         config->hca_attr.qos.packet_pacing ? "" : "not ");
1547                 DRV_LOG(DEBUG, "Cross channel ops are %ssupported",
1548                         config->hca_attr.cross_channel ? "" : "not ");
1549                 DRV_LOG(DEBUG, "WQE index ignore is %ssupported",
1550                         config->hca_attr.wqe_index_ignore ? "" : "not ");
1551                 DRV_LOG(DEBUG, "Non-wire SQ feature is %ssupported",
1552                         config->hca_attr.non_wire_sq ? "" : "not ");
1553                 DRV_LOG(DEBUG, "Static WQE SQ feature is %ssupported (%d)",
1554                         config->hca_attr.log_max_static_sq_wq ? "" : "not ",
1555                         config->hca_attr.log_max_static_sq_wq);
1556                 DRV_LOG(DEBUG, "WQE rate PP mode is %ssupported",
1557                         config->hca_attr.qos.wqe_rate_pp ? "" : "not ");
1558                 if (!config->devx) {
1559                         DRV_LOG(ERR, "DevX is required for packet pacing");
1560                         err = ENODEV;
1561                         goto error;
1562                 }
1563                 if (!config->hca_attr.qos.packet_pacing) {
1564                         DRV_LOG(ERR, "Packet pacing is not supported");
1565                         err = ENODEV;
1566                         goto error;
1567                 }
1568                 if (!config->hca_attr.cross_channel) {
1569                         DRV_LOG(ERR, "Cross channel operations are"
1570                                      " required for packet pacing");
1571                         err = ENODEV;
1572                         goto error;
1573                 }
1574                 if (!config->hca_attr.wqe_index_ignore) {
1575                         DRV_LOG(ERR, "WQE index ignore feature is"
1576                                      " required for packet pacing");
1577                         err = ENODEV;
1578                         goto error;
1579                 }
1580                 if (!config->hca_attr.non_wire_sq) {
1581                         DRV_LOG(ERR, "Non-wire SQ feature is"
1582                                      " required for packet pacing");
1583                         err = ENODEV;
1584                         goto error;
1585                 }
1586                 if (!config->hca_attr.log_max_static_sq_wq) {
1587                         DRV_LOG(ERR, "Static WQE SQ feature is"
1588                                      " required for packet pacing");
1589                         err = ENODEV;
1590                         goto error;
1591                 }
1592                 if (!config->hca_attr.qos.wqe_rate_pp) {
1593                         DRV_LOG(ERR, "WQE rate mode is required"
1594                                      " for packet pacing");
1595                         err = ENODEV;
1596                         goto error;
1597                 }
1598 #ifndef HAVE_MLX5DV_DEVX_UAR_OFFSET
1599                 DRV_LOG(ERR, "DevX does not provide UAR offset,"
1600                              " can't create queues for packet pacing");
1601                 err = ENODEV;
1602                 goto error;
1603 #endif
1604         }
1605         if (config->devx) {
1606                 uint32_t reg[MLX5_ST_SZ_DW(register_mtutc)];
1607
1608                 err = config->hca_attr.access_register_user ?
1609                         mlx5_devx_cmd_register_read
1610                                 (sh->ctx, MLX5_REGISTER_ID_MTUTC, 0,
1611                                 reg, MLX5_ST_SZ_DW(register_mtutc)) : ENOTSUP;
1612                 if (!err) {
1613                         uint32_t ts_mode;
1614
1615                         /* MTUTC register is read successfully. */
1616                         ts_mode = MLX5_GET(register_mtutc, reg,
1617                                            time_stamp_mode);
1618                         if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
1619                                 config->rt_timestamp = 1;
1620                 } else {
1621                         /* Kernel does not support register reading. */
1622                         if (config->hca_attr.dev_freq_khz ==
1623                                                  (NS_PER_S / MS_PER_S))
1624                                 config->rt_timestamp = 1;
1625                 }
1626         }
1627         /*
1628          * If HW has bug working with tunnel packet decapsulation and
1629          * scatter FCS, and decapsulation is needed, clear the hw_fcs_strip
1630          * bit. Then DEV_RX_OFFLOAD_KEEP_CRC bit will not be set anymore.
1631          */
1632         if (config->hca_attr.scatter_fcs_w_decap_disable && config->decap_en)
1633                 config->hw_fcs_strip = 0;
1634         DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
1635                 (config->hw_fcs_strip ? "" : "not "));
1636         if (config->mprq.enabled && mprq) {
1637                 if (config->mprq.stride_num_n &&
1638                     (config->mprq.stride_num_n > mprq_max_stride_num_n ||
1639                      config->mprq.stride_num_n < mprq_min_stride_num_n)) {
1640                         config->mprq.stride_num_n =
1641                                 RTE_MIN(RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
1642                                                 mprq_min_stride_num_n),
1643                                         mprq_max_stride_num_n);
1644                         DRV_LOG(WARNING,
1645                                 "the number of strides"
1646                                 " for Multi-Packet RQ is out of range,"
1647                                 " setting default value (%u)",
1648                                 1 << config->mprq.stride_num_n);
1649                 }
1650                 if (config->mprq.stride_size_n &&
1651                     (config->mprq.stride_size_n > mprq_max_stride_size_n ||
1652                      config->mprq.stride_size_n < mprq_min_stride_size_n)) {
1653                         config->mprq.stride_size_n =
1654                                 RTE_MIN(RTE_MAX(MLX5_MPRQ_STRIDE_SIZE_N,
1655                                                 mprq_min_stride_size_n),
1656                                         mprq_max_stride_size_n);
1657                         DRV_LOG(WARNING,
1658                                 "the size of a stride"
1659                                 " for Multi-Packet RQ is out of range,"
1660                                 " setting default value (%u)",
1661                                 1 << config->mprq.stride_size_n);
1662                 }
1663                 config->mprq.min_stride_size_n = mprq_min_stride_size_n;
1664                 config->mprq.max_stride_size_n = mprq_max_stride_size_n;
1665         } else if (config->mprq.enabled && !mprq) {
1666                 DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
1667                 config->mprq.enabled = 0;
1668         }
1669         if (config->max_dump_files_num == 0)
1670                 config->max_dump_files_num = 128;
1671         eth_dev = rte_eth_dev_allocate(name);
1672         if (eth_dev == NULL) {
1673                 DRV_LOG(ERR, "can not allocate rte ethdev");
1674                 err = ENOMEM;
1675                 goto error;
1676         }
1677         if (priv->representor) {
1678                 eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
1679                 eth_dev->data->representor_id = priv->representor_id;
1680         }
1681         priv->mp_id.port_id = eth_dev->data->port_id;
1682         strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
1683         /*
1684          * Store associated network device interface index. This index
1685          * is permanent throughout the lifetime of device. So, we may store
1686          * the ifindex here and use the cached value further.
1687          */
1688         MLX5_ASSERT(spawn->ifindex);
1689         priv->if_index = spawn->ifindex;
1690         eth_dev->data->dev_private = priv;
1691         priv->dev_data = eth_dev->data;
1692         eth_dev->data->mac_addrs = priv->mac;
1693         eth_dev->device = dpdk_dev;
1694         eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
1695         /* Configure the first MAC address by default. */
1696         if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
1697                 DRV_LOG(ERR,
1698                         "port %u cannot get MAC address, is mlx5_en"
1699                         " loaded? (errno: %s)",
1700                         eth_dev->data->port_id, strerror(rte_errno));
1701                 err = ENODEV;
1702                 goto error;
1703         }
1704         DRV_LOG(INFO,
1705                 "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
1706                 eth_dev->data->port_id,
1707                 mac.addr_bytes[0], mac.addr_bytes[1],
1708                 mac.addr_bytes[2], mac.addr_bytes[3],
1709                 mac.addr_bytes[4], mac.addr_bytes[5]);
1710 #ifdef RTE_LIBRTE_MLX5_DEBUG
1711         {
1712                 char ifname[MLX5_NAMESIZE];
1713
1714                 if (mlx5_get_ifname(eth_dev, &ifname) == 0)
1715                         DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
1716                                 eth_dev->data->port_id, ifname);
1717                 else
1718                         DRV_LOG(DEBUG, "port %u ifname is unknown",
1719                                 eth_dev->data->port_id);
1720         }
1721 #endif
1722         /* Get actual MTU if possible. */
1723         err = mlx5_get_mtu(eth_dev, &priv->mtu);
1724         if (err) {
1725                 err = rte_errno;
1726                 goto error;
1727         }
1728         DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
1729                 priv->mtu);
1730         /* Initialize burst functions to prevent crashes before link-up. */
1731         eth_dev->rx_pkt_burst = removed_rx_burst;
1732         eth_dev->tx_pkt_burst = removed_tx_burst;
1733         eth_dev->dev_ops = &mlx5_dev_ops;
1734         eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
1735         eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
1736         eth_dev->rx_queue_count = mlx5_rx_queue_count;
1737         /* Register MAC address. */
1738         claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
1739         if (config->vf && config->vf_nl_en)
1740                 mlx5_nl_mac_addr_sync(priv->nl_socket_route,
1741                                       mlx5_ifindex(eth_dev),
1742                                       eth_dev->data->mac_addrs,
1743                                       MLX5_MAX_MAC_ADDRESSES);
1744         priv->ctrl_flows = 0;
1745         rte_spinlock_init(&priv->flow_list_lock);
1746         TAILQ_INIT(&priv->flow_meters);
1747         priv->mtr_profile_tbl = mlx5_l3t_create(MLX5_L3T_TYPE_PTR);
1748         if (!priv->mtr_profile_tbl)
1749                 goto error;
1750         /* Hint libmlx5 to use PMD allocator for data plane resources */
1751         mlx5_glue->dv_set_context_attr(sh->ctx,
1752                         MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
1753                         (void *)((uintptr_t)&(struct mlx5dv_ctx_allocators){
1754                                 .alloc = &mlx5_alloc_verbs_buf,
1755                                 .free = &mlx5_free_verbs_buf,
1756                                 .data = sh,
1757                         }));
1758         /* Bring Ethernet device up. */
1759         DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
1760                 eth_dev->data->port_id);
1761         mlx5_set_link_up(eth_dev);
1762         /*
1763          * Even though the interrupt handler is not installed yet,
1764          * interrupts will still trigger on the async_fd from
1765          * Verbs context returned by ibv_open_device().
1766          */
1767         mlx5_link_update(eth_dev, 0);
1768 #ifdef HAVE_MLX5DV_DR_ESWITCH
1769         if (!(config->hca_attr.eswitch_manager && config->dv_flow_en &&
1770               (switch_info->representor || switch_info->master)))
1771                 config->dv_esw_en = 0;
1772 #else
1773         config->dv_esw_en = 0;
1774 #endif
1775         /* Detect minimal data bytes to inline. */
1776         mlx5_set_min_inline(spawn, config);
1777         /* Store device configuration on private structure. */
1778         priv->config = *config;
1779         for (i = 0; i < MLX5_FLOW_TYPE_MAXI; i++) {
1780                 icfg[i].release_mem_en = !!config->reclaim_mode;
1781                 if (config->reclaim_mode)
1782                         icfg[i].per_core_cache = 0;
1783                 priv->flows[i] = mlx5_ipool_create(&icfg[i]);
1784                 if (!priv->flows[i])
1785                         goto error;
1786         }
1787         /* Create context for virtual machine VLAN workaround. */
1788         priv->vmwa_context = mlx5_vlan_vmwa_init(eth_dev, spawn->ifindex);
1789         if (config->dv_flow_en) {
1790                 err = mlx5_alloc_shared_dr(priv);
1791                 if (err)
1792                         goto error;
1793         }
1794         if (config->devx && config->dv_flow_en && config->dest_tir) {
1795                 priv->obj_ops = devx_obj_ops;
1796                 priv->obj_ops.drop_action_create =
1797                                                 ibv_obj_ops.drop_action_create;
1798                 priv->obj_ops.drop_action_destroy =
1799                                                 ibv_obj_ops.drop_action_destroy;
1800 #ifndef HAVE_MLX5DV_DEVX_UAR_OFFSET
1801                 priv->obj_ops.txq_obj_modify = ibv_obj_ops.txq_obj_modify;
1802 #else
1803                 if (config->dv_esw_en)
1804                         priv->obj_ops.txq_obj_modify =
1805                                                 ibv_obj_ops.txq_obj_modify;
1806 #endif
1807                 /* Use specific wrappers for Tx object. */
1808                 priv->obj_ops.txq_obj_new = mlx5_os_txq_obj_new;
1809                 priv->obj_ops.txq_obj_release = mlx5_os_txq_obj_release;
1810                 mlx5_queue_counter_id_prepare(eth_dev);
1811                 priv->obj_ops.lb_dummy_queue_create =
1812                                         mlx5_rxq_ibv_obj_dummy_lb_create;
1813                 priv->obj_ops.lb_dummy_queue_release =
1814                                         mlx5_rxq_ibv_obj_dummy_lb_release;
1815         } else {
1816                 priv->obj_ops = ibv_obj_ops;
1817         }
1818         if (config->tx_pp &&
1819             (priv->config.dv_esw_en ||
1820              priv->obj_ops.txq_obj_new != mlx5_os_txq_obj_new)) {
1821                 /*
1822                  * HAVE_MLX5DV_DEVX_UAR_OFFSET is required to support
1823                  * packet pacing and already checked above.
1824                  * Hence, we should only make sure the SQs will be created
1825                  * with DevX, not with Verbs.
1826                  * Verbs allocates the SQ UAR on its own and it can't be shared
1827                  * with Clock Queue UAR as required for Tx scheduling.
1828                  */
1829                 DRV_LOG(ERR, "Verbs SQs, UAR can't be shared as required for packet pacing");
1830                 err = ENODEV;
1831                 goto error;
1832         }
1833         priv->drop_queue.hrxq = mlx5_drop_action_create(eth_dev);
1834         if (!priv->drop_queue.hrxq)
1835                 goto error;
1836         /* Supported Verbs flow priority number detection. */
1837         err = mlx5_flow_discover_priorities(eth_dev);
1838         if (err < 0) {
1839                 err = -err;
1840                 goto error;
1841         }
1842         priv->config.flow_prio = err;
1843         if (!priv->config.dv_esw_en &&
1844             priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
1845                 DRV_LOG(WARNING, "metadata mode %u is not supported "
1846                                  "(no E-Switch)", priv->config.dv_xmeta_en);
1847                 priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
1848         }
1849         mlx5_set_metadata_mask(eth_dev);
1850         if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
1851             !priv->sh->dv_regc0_mask) {
1852                 DRV_LOG(ERR, "metadata mode %u is not supported "
1853                              "(no metadata reg_c[0] is available)",
1854                              priv->config.dv_xmeta_en);
1855                         err = ENOTSUP;
1856                         goto error;
1857         }
1858         priv->hrxqs = mlx5_list_create("hrxq", eth_dev, true,
1859                                        mlx5_hrxq_create_cb,
1860                                        mlx5_hrxq_match_cb,
1861                                        mlx5_hrxq_remove_cb,
1862                                        mlx5_hrxq_clone_cb,
1863                                        mlx5_hrxq_clone_free_cb);
1864         if (!priv->hrxqs)
1865                 goto error;
1866         rte_rwlock_init(&priv->ind_tbls_lock);
1867         /* Query availability of metadata reg_c's. */
1868         err = mlx5_flow_discover_mreg_c(eth_dev);
1869         if (err < 0) {
1870                 err = -err;
1871                 goto error;
1872         }
1873         if (!mlx5_flow_ext_mreg_supported(eth_dev)) {
1874                 DRV_LOG(DEBUG,
1875                         "port %u extensive metadata register is not supported",
1876                         eth_dev->data->port_id);
1877                 if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
1878                         DRV_LOG(ERR, "metadata mode %u is not supported "
1879                                      "(no metadata registers available)",
1880                                      priv->config.dv_xmeta_en);
1881                         err = ENOTSUP;
1882                         goto error;
1883                 }
1884         }
1885         if (priv->config.dv_flow_en &&
1886             priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
1887             mlx5_flow_ext_mreg_supported(eth_dev) &&
1888             priv->sh->dv_regc0_mask) {
1889                 priv->mreg_cp_tbl = mlx5_hlist_create(MLX5_FLOW_MREG_HNAME,
1890                                                       MLX5_FLOW_MREG_HTABLE_SZ,
1891                                                       false, true, eth_dev,
1892                                                       flow_dv_mreg_create_cb,
1893                                                       flow_dv_mreg_match_cb,
1894                                                       flow_dv_mreg_remove_cb,
1895                                                       flow_dv_mreg_clone_cb,
1896                                                     flow_dv_mreg_clone_free_cb);
1897                 if (!priv->mreg_cp_tbl) {
1898                         err = ENOMEM;
1899                         goto error;
1900                 }
1901         }
1902         rte_spinlock_init(&priv->shared_act_sl);
1903         mlx5_flow_counter_mode_config(eth_dev);
1904         mlx5_flow_drop_action_config(eth_dev);
1905         if (priv->config.dv_flow_en)
1906                 eth_dev->data->dev_flags |= RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE;
1907         return eth_dev;
1908 error:
1909         if (priv) {
1910                 if (priv->mreg_cp_tbl)
1911                         mlx5_hlist_destroy(priv->mreg_cp_tbl);
1912                 if (priv->sh)
1913                         mlx5_os_free_shared_dr(priv);
1914                 if (priv->nl_socket_route >= 0)
1915                         close(priv->nl_socket_route);
1916                 if (priv->nl_socket_rdma >= 0)
1917                         close(priv->nl_socket_rdma);
1918                 if (priv->vmwa_context)
1919                         mlx5_vlan_vmwa_exit(priv->vmwa_context);
1920                 if (eth_dev && priv->drop_queue.hrxq)
1921                         mlx5_drop_action_destroy(eth_dev);
1922                 if (priv->mtr_profile_tbl)
1923                         mlx5_l3t_destroy(priv->mtr_profile_tbl);
1924                 if (own_domain_id)
1925                         claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1926                 if (priv->hrxqs)
1927                         mlx5_list_destroy(priv->hrxqs);
1928                 mlx5_free(priv);
1929                 if (eth_dev != NULL)
1930                         eth_dev->data->dev_private = NULL;
1931         }
1932         if (eth_dev != NULL) {
1933                 /* mac_addrs must not be freed alone because part of
1934                  * dev_private
1935                  **/
1936                 eth_dev->data->mac_addrs = NULL;
1937                 rte_eth_dev_release_port(eth_dev);
1938         }
1939         if (sh)
1940                 mlx5_free_shared_dev_ctx(sh);
1941         MLX5_ASSERT(err > 0);
1942         rte_errno = err;
1943         return NULL;
1944 }
1945
1946 /**
1947  * Comparison callback to sort device data.
1948  *
1949  * This is meant to be used with qsort().
1950  *
1951  * @param a[in]
1952  *   Pointer to pointer to first data object.
1953  * @param b[in]
1954  *   Pointer to pointer to second data object.
1955  *
1956  * @return
1957  *   0 if both objects are equal, less than 0 if the first argument is less
1958  *   than the second, greater than 0 otherwise.
1959  */
1960 static int
1961 mlx5_dev_spawn_data_cmp(const void *a, const void *b)
1962 {
1963         const struct mlx5_switch_info *si_a =
1964                 &((const struct mlx5_dev_spawn_data *)a)->info;
1965         const struct mlx5_switch_info *si_b =
1966                 &((const struct mlx5_dev_spawn_data *)b)->info;
1967         int ret;
1968
1969         /* Master device first. */
1970         ret = si_b->master - si_a->master;
1971         if (ret)
1972                 return ret;
1973         /* Then representor devices. */
1974         ret = si_b->representor - si_a->representor;
1975         if (ret)
1976                 return ret;
1977         /* Unidentified devices come last in no specific order. */
1978         if (!si_a->representor)
1979                 return 0;
1980         /* Order representors by name. */
1981         return si_a->port_name - si_b->port_name;
1982 }
1983
1984 /**
1985  * Match PCI information for possible slaves of bonding device.
1986  *
1987  * @param[in] ibv_dev
1988  *   Pointer to Infiniband device structure.
1989  * @param[in] pci_dev
1990  *   Pointer to primary PCI address structure to match.
1991  * @param[in] nl_rdma
1992  *   Netlink RDMA group socket handle.
1993  * @param[in] owner
1994  *   Rerepsentor owner PF index.
1995  * @param[out] bond_info
1996  *   Pointer to bonding information.
1997  *
1998  * @return
1999  *   negative value if no bonding device found, otherwise
2000  *   positive index of slave PF in bonding.
2001  */
2002 static int
2003 mlx5_device_bond_pci_match(const struct ibv_device *ibv_dev,
2004                            const struct rte_pci_addr *pci_dev,
2005                            int nl_rdma, uint16_t owner,
2006                            struct mlx5_bond_info *bond_info)
2007 {
2008         char ifname[IF_NAMESIZE + 1];
2009         unsigned int ifindex;
2010         unsigned int np, i;
2011         FILE *bond_file = NULL, *file;
2012         int pf = -1;
2013         int ret;
2014
2015         /*
2016          * Try to get master device name. If something goes
2017          * wrong suppose the lack of kernel support and no
2018          * bonding devices.
2019          */
2020         memset(bond_info, 0, sizeof(*bond_info));
2021         if (nl_rdma < 0)
2022                 return -1;
2023         if (!strstr(ibv_dev->name, "bond"))
2024                 return -1;
2025         np = mlx5_nl_portnum(nl_rdma, ibv_dev->name);
2026         if (!np)
2027                 return -1;
2028         /*
2029          * The Master device might not be on the predefined
2030          * port (not on port index 1, it is not garanted),
2031          * we have to scan all Infiniband device port and
2032          * find master.
2033          */
2034         for (i = 1; i <= np; ++i) {
2035                 /* Check whether Infiniband port is populated. */
2036                 ifindex = mlx5_nl_ifindex(nl_rdma, ibv_dev->name, i);
2037                 if (!ifindex)
2038                         continue;
2039                 if (!if_indextoname(ifindex, ifname))
2040                         continue;
2041                 /* Try to read bonding slave names from sysfs. */
2042                 MKSTR(slaves,
2043                       "/sys/class/net/%s/master/bonding/slaves", ifname);
2044                 bond_file = fopen(slaves, "r");
2045                 if (bond_file)
2046                         break;
2047         }
2048         if (!bond_file)
2049                 return -1;
2050         /* Use safe format to check maximal buffer length. */
2051         MLX5_ASSERT(atol(RTE_STR(IF_NAMESIZE)) == IF_NAMESIZE);
2052         while (fscanf(bond_file, "%" RTE_STR(IF_NAMESIZE) "s", ifname) == 1) {
2053                 char tmp_str[IF_NAMESIZE + 32];
2054                 struct rte_pci_addr pci_addr;
2055                 struct mlx5_switch_info info;
2056
2057                 /* Process slave interface names in the loop. */
2058                 snprintf(tmp_str, sizeof(tmp_str),
2059                          "/sys/class/net/%s", ifname);
2060                 if (mlx5_get_pci_addr(tmp_str, &pci_addr)) {
2061                         DRV_LOG(WARNING, "can not get PCI address"
2062                                          " for netdev \"%s\"", ifname);
2063                         continue;
2064                 }
2065                 /* Slave interface PCI address match found. */
2066                 snprintf(tmp_str, sizeof(tmp_str),
2067                          "/sys/class/net/%s/phys_port_name", ifname);
2068                 file = fopen(tmp_str, "rb");
2069                 if (!file)
2070                         break;
2071                 info.name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET;
2072                 if (fscanf(file, "%32s", tmp_str) == 1)
2073                         mlx5_translate_port_name(tmp_str, &info);
2074                 fclose(file);
2075                 /* Only process PF ports. */
2076                 if (info.name_type != MLX5_PHYS_PORT_NAME_TYPE_LEGACY &&
2077                     info.name_type != MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
2078                         continue;
2079                 /* Check max bonding member. */
2080                 if (info.port_name >= MLX5_BOND_MAX_PORTS) {
2081                         DRV_LOG(WARNING, "bonding index out of range, "
2082                                 "please increase MLX5_BOND_MAX_PORTS: %s",
2083                                 tmp_str);
2084                         break;
2085                 }
2086                 /* Match PCI address, allows BDF0+pfx or BDFx+pfx. */
2087                 if (pci_dev->domain == pci_addr.domain &&
2088                     pci_dev->bus == pci_addr.bus &&
2089                     pci_dev->devid == pci_addr.devid &&
2090                     ((pci_dev->function == 0 &&
2091                       pci_dev->function + owner == pci_addr.function) ||
2092                      (pci_dev->function == owner &&
2093                       pci_addr.function == owner)))
2094                         pf = info.port_name;
2095                 /* Get ifindex. */
2096                 snprintf(tmp_str, sizeof(tmp_str),
2097                          "/sys/class/net/%s/ifindex", ifname);
2098                 file = fopen(tmp_str, "rb");
2099                 if (!file)
2100                         break;
2101                 ret = fscanf(file, "%u", &ifindex);
2102                 fclose(file);
2103                 if (ret != 1)
2104                         break;
2105                 /* Save bonding info. */
2106                 strncpy(bond_info->ports[info.port_name].ifname, ifname,
2107                         sizeof(bond_info->ports[0].ifname));
2108                 bond_info->ports[info.port_name].pci_addr = pci_addr;
2109                 bond_info->ports[info.port_name].ifindex = ifindex;
2110                 bond_info->n_port++;
2111         }
2112         if (pf >= 0) {
2113                 /* Get bond interface info */
2114                 ret = mlx5_sysfs_bond_info(ifindex, &bond_info->ifindex,
2115                                            bond_info->ifname);
2116                 if (ret)
2117                         DRV_LOG(ERR, "unable to get bond info: %s",
2118                                 strerror(rte_errno));
2119                 else
2120                         DRV_LOG(INFO, "PF device %u, bond device %u(%s)",
2121                                 ifindex, bond_info->ifindex, bond_info->ifname);
2122         }
2123         return pf;
2124 }
2125
2126 static void
2127 mlx5_os_config_default(struct mlx5_dev_config *config)
2128 {
2129         memset(config, 0, sizeof(*config));
2130         config->mps = MLX5_ARG_UNSET;
2131         config->dbnc = MLX5_ARG_UNSET;
2132         config->rx_vec_en = 1;
2133         config->txq_inline_max = MLX5_ARG_UNSET;
2134         config->txq_inline_min = MLX5_ARG_UNSET;
2135         config->txq_inline_mpw = MLX5_ARG_UNSET;
2136         config->txqs_inline = MLX5_ARG_UNSET;
2137         config->vf_nl_en = 1;
2138         config->mr_ext_memseg_en = 1;
2139         config->mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
2140         config->mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
2141         config->dv_esw_en = 1;
2142         config->dv_flow_en = 1;
2143         config->decap_en = 1;
2144         config->log_hp_size = MLX5_ARG_UNSET;
2145 }
2146
2147 /**
2148  * Register a PCI device within bonding.
2149  *
2150  * This function spawns Ethernet devices out of a given PCI device and
2151  * bonding owner PF index.
2152  *
2153  * @param[in] pci_dev
2154  *   PCI device information.
2155  * @param[in] req_eth_da
2156  *   Requested ethdev device argument.
2157  * @param[in] owner_id
2158  *   Requested owner PF port ID within bonding device, default to 0.
2159  *
2160  * @return
2161  *   0 on success, a negative errno value otherwise and rte_errno is set.
2162  */
2163 static int
2164 mlx5_os_pci_probe_pf(struct rte_pci_device *pci_dev,
2165                      struct rte_eth_devargs *req_eth_da,
2166                      uint16_t owner_id)
2167 {
2168         struct ibv_device **ibv_list;
2169         /*
2170          * Number of found IB Devices matching with requested PCI BDF.
2171          * nd != 1 means there are multiple IB devices over the same
2172          * PCI device and we have representors and master.
2173          */
2174         unsigned int nd = 0;
2175         /*
2176          * Number of found IB device Ports. nd = 1 and np = 1..n means
2177          * we have the single multiport IB device, and there may be
2178          * representors attached to some of found ports.
2179          */
2180         unsigned int np = 0;
2181         /*
2182          * Number of DPDK ethernet devices to Spawn - either over
2183          * multiple IB devices or multiple ports of single IB device.
2184          * Actually this is the number of iterations to spawn.
2185          */
2186         unsigned int ns = 0;
2187         /*
2188          * Bonding device
2189          *   < 0 - no bonding device (single one)
2190          *  >= 0 - bonding device (value is slave PF index)
2191          */
2192         int bd = -1;
2193         struct mlx5_dev_spawn_data *list = NULL;
2194         struct mlx5_dev_config dev_config;
2195         unsigned int dev_config_vf;
2196         struct rte_eth_devargs eth_da = *req_eth_da;
2197         struct rte_pci_addr owner_pci = pci_dev->addr; /* Owner PF. */
2198         struct mlx5_bond_info bond_info;
2199         int ret = -1;
2200
2201         errno = 0;
2202         ibv_list = mlx5_glue->get_device_list(&ret);
2203         if (!ibv_list) {
2204                 rte_errno = errno ? errno : ENOSYS;
2205                 DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?");
2206                 return -rte_errno;
2207         }
2208         /*
2209          * First scan the list of all Infiniband devices to find
2210          * matching ones, gathering into the list.
2211          */
2212         struct ibv_device *ibv_match[ret + 1];
2213         int nl_route = mlx5_nl_init(NETLINK_ROUTE);
2214         int nl_rdma = mlx5_nl_init(NETLINK_RDMA);
2215         unsigned int i;
2216
2217         while (ret-- > 0) {
2218                 struct rte_pci_addr pci_addr;
2219
2220                 DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
2221                 bd = mlx5_device_bond_pci_match
2222                                 (ibv_list[ret], &owner_pci, nl_rdma, owner_id,
2223                                  &bond_info);
2224                 if (bd >= 0) {
2225                         /*
2226                          * Bonding device detected. Only one match is allowed,
2227                          * the bonding is supported over multi-port IB device,
2228                          * there should be no matches on representor PCI
2229                          * functions or non VF LAG bonding devices with
2230                          * specified address.
2231                          */
2232                         if (nd) {
2233                                 DRV_LOG(ERR,
2234                                         "multiple PCI match on bonding device"
2235                                         "\"%s\" found", ibv_list[ret]->name);
2236                                 rte_errno = ENOENT;
2237                                 ret = -rte_errno;
2238                                 goto exit;
2239                         }
2240                         /* Amend owner pci address if owner PF ID specified. */
2241                         if (eth_da.nb_representor_ports)
2242                                 owner_pci.function += owner_id;
2243                         DRV_LOG(INFO, "PCI information matches for"
2244                                       " slave %d bonding device \"%s\"",
2245                                       bd, ibv_list[ret]->name);
2246                         ibv_match[nd++] = ibv_list[ret];
2247                         break;
2248                 } else {
2249                         /* Bonding device not found. */
2250                         if (mlx5_get_pci_addr(ibv_list[ret]->ibdev_path,
2251                                               &pci_addr))
2252                                 continue;
2253                         if (owner_pci.domain != pci_addr.domain ||
2254                             owner_pci.bus != pci_addr.bus ||
2255                             owner_pci.devid != pci_addr.devid ||
2256                             owner_pci.function != pci_addr.function)
2257                                 continue;
2258                         DRV_LOG(INFO, "PCI information matches for device \"%s\"",
2259                                 ibv_list[ret]->name);
2260                         ibv_match[nd++] = ibv_list[ret];
2261                 }
2262         }
2263         ibv_match[nd] = NULL;
2264         if (!nd) {
2265                 /* No device matches, just complain and bail out. */
2266                 DRV_LOG(WARNING,
2267                         "no Verbs device matches PCI device " PCI_PRI_FMT ","
2268                         " are kernel drivers loaded?",
2269                         owner_pci.domain, owner_pci.bus,
2270                         owner_pci.devid, owner_pci.function);
2271                 rte_errno = ENOENT;
2272                 ret = -rte_errno;
2273                 goto exit;
2274         }
2275         if (nd == 1) {
2276                 /*
2277                  * Found single matching device may have multiple ports.
2278                  * Each port may be representor, we have to check the port
2279                  * number and check the representors existence.
2280                  */
2281                 if (nl_rdma >= 0)
2282                         np = mlx5_nl_portnum(nl_rdma, ibv_match[0]->name);
2283                 if (!np)
2284                         DRV_LOG(WARNING, "can not get IB device \"%s\""
2285                                          " ports number", ibv_match[0]->name);
2286                 if (bd >= 0 && !np) {
2287                         DRV_LOG(ERR, "can not get ports"
2288                                      " for bonding device");
2289                         rte_errno = ENOENT;
2290                         ret = -rte_errno;
2291                         goto exit;
2292                 }
2293         }
2294         /*
2295          * Now we can determine the maximal
2296          * amount of devices to be spawned.
2297          */
2298         list = mlx5_malloc(MLX5_MEM_ZERO,
2299                            sizeof(struct mlx5_dev_spawn_data) *
2300                            (np ? np : nd),
2301                            RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
2302         if (!list) {
2303                 DRV_LOG(ERR, "spawn data array allocation failure");
2304                 rte_errno = ENOMEM;
2305                 ret = -rte_errno;
2306                 goto exit;
2307         }
2308         if (bd >= 0 || np > 1) {
2309                 /*
2310                  * Single IB device with multiple ports found,
2311                  * it may be E-Switch master device and representors.
2312                  * We have to perform identification through the ports.
2313                  */
2314                 MLX5_ASSERT(nl_rdma >= 0);
2315                 MLX5_ASSERT(ns == 0);
2316                 MLX5_ASSERT(nd == 1);
2317                 MLX5_ASSERT(np);
2318                 for (i = 1; i <= np; ++i) {
2319                         list[ns].bond_info = &bond_info;
2320                         list[ns].max_port = np;
2321                         list[ns].phys_port = i;
2322                         list[ns].phys_dev = ibv_match[0];
2323                         list[ns].eth_dev = NULL;
2324                         list[ns].pci_dev = pci_dev;
2325                         list[ns].pf_bond = bd;
2326                         list[ns].ifindex = mlx5_nl_ifindex
2327                                 (nl_rdma,
2328                                 mlx5_os_get_dev_device_name
2329                                                 (list[ns].phys_dev), i);
2330                         if (!list[ns].ifindex) {
2331                                 /*
2332                                  * No network interface index found for the
2333                                  * specified port, it means there is no
2334                                  * representor on this port. It's OK,
2335                                  * there can be disabled ports, for example
2336                                  * if sriov_numvfs < sriov_totalvfs.
2337                                  */
2338                                 continue;
2339                         }
2340                         ret = -1;
2341                         if (nl_route >= 0)
2342                                 ret = mlx5_nl_switch_info
2343                                                (nl_route,
2344                                                 list[ns].ifindex,
2345                                                 &list[ns].info);
2346                         if (ret || (!list[ns].info.representor &&
2347                                     !list[ns].info.master)) {
2348                                 /*
2349                                  * We failed to recognize representors with
2350                                  * Netlink, let's try to perform the task
2351                                  * with sysfs.
2352                                  */
2353                                 ret =  mlx5_sysfs_switch_info
2354                                                 (list[ns].ifindex,
2355                                                  &list[ns].info);
2356                         }
2357                         if (!ret && bd >= 0) {
2358                                 switch (list[ns].info.name_type) {
2359                                 case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
2360                                         if (np == 1) {
2361                                                 /*
2362                                                  * Force standalone bonding
2363                                                  * device for ROCE LAG
2364                                                  * confgiurations.
2365                                                  */
2366                                                 list[ns].info.master = 0;
2367                                                 list[ns].info.representor = 0;
2368                                         }
2369                                         if (list[ns].info.port_name == bd)
2370                                                 ns++;
2371                                         break;
2372                                 case MLX5_PHYS_PORT_NAME_TYPE_PFHPF:
2373                                         /* Fallthrough */
2374                                 case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
2375                                         /* Fallthrough */
2376                                 case MLX5_PHYS_PORT_NAME_TYPE_PFSF:
2377                                         if (list[ns].info.pf_num == bd)
2378                                                 ns++;
2379                                         break;
2380                                 default:
2381                                         break;
2382                                 }
2383                                 continue;
2384                         }
2385                         if (!ret && (list[ns].info.representor ^
2386                                      list[ns].info.master))
2387                                 ns++;
2388                 }
2389                 if (!ns) {
2390                         DRV_LOG(ERR,
2391                                 "unable to recognize master/representors"
2392                                 " on the IB device with multiple ports");
2393                         rte_errno = ENOENT;
2394                         ret = -rte_errno;
2395                         goto exit;
2396                 }
2397         } else {
2398                 /*
2399                  * The existence of several matching entries (nd > 1) means
2400                  * port representors have been instantiated. No existing Verbs
2401                  * call nor sysfs entries can tell them apart, this can only
2402                  * be done through Netlink calls assuming kernel drivers are
2403                  * recent enough to support them.
2404                  *
2405                  * In the event of identification failure through Netlink,
2406                  * try again through sysfs, then:
2407                  *
2408                  * 1. A single IB device matches (nd == 1) with single
2409                  *    port (np=0/1) and is not a representor, assume
2410                  *    no switch support.
2411                  *
2412                  * 2. Otherwise no safe assumptions can be made;
2413                  *    complain louder and bail out.
2414                  */
2415                 for (i = 0; i != nd; ++i) {
2416                         memset(&list[ns].info, 0, sizeof(list[ns].info));
2417                         list[ns].bond_info = NULL;
2418                         list[ns].max_port = 1;
2419                         list[ns].phys_port = 1;
2420                         list[ns].phys_dev = ibv_match[i];
2421                         list[ns].eth_dev = NULL;
2422                         list[ns].pci_dev = pci_dev;
2423                         list[ns].pf_bond = -1;
2424                         list[ns].ifindex = 0;
2425                         if (nl_rdma >= 0)
2426                                 list[ns].ifindex = mlx5_nl_ifindex
2427                                 (nl_rdma,
2428                                 mlx5_os_get_dev_device_name
2429                                                 (list[ns].phys_dev), 1);
2430                         if (!list[ns].ifindex) {
2431                                 char ifname[IF_NAMESIZE];
2432
2433                                 /*
2434                                  * Netlink failed, it may happen with old
2435                                  * ib_core kernel driver (before 4.16).
2436                                  * We can assume there is old driver because
2437                                  * here we are processing single ports IB
2438                                  * devices. Let's try sysfs to retrieve
2439                                  * the ifindex. The method works for
2440                                  * master device only.
2441                                  */
2442                                 if (nd > 1) {
2443                                         /*
2444                                          * Multiple devices found, assume
2445                                          * representors, can not distinguish
2446                                          * master/representor and retrieve
2447                                          * ifindex via sysfs.
2448                                          */
2449                                         continue;
2450                                 }
2451                                 ret = mlx5_get_ifname_sysfs
2452                                         (ibv_match[i]->ibdev_path, ifname);
2453                                 if (!ret)
2454                                         list[ns].ifindex =
2455                                                 if_nametoindex(ifname);
2456                                 if (!list[ns].ifindex) {
2457                                         /*
2458                                          * No network interface index found
2459                                          * for the specified device, it means
2460                                          * there it is neither representor
2461                                          * nor master.
2462                                          */
2463                                         continue;
2464                                 }
2465                         }
2466                         ret = -1;
2467                         if (nl_route >= 0)
2468                                 ret = mlx5_nl_switch_info
2469                                                (nl_route,
2470                                                 list[ns].ifindex,
2471                                                 &list[ns].info);
2472                         if (ret || (!list[ns].info.representor &&
2473                                     !list[ns].info.master)) {
2474                                 /*
2475                                  * We failed to recognize representors with
2476                                  * Netlink, let's try to perform the task
2477                                  * with sysfs.
2478                                  */
2479                                 ret =  mlx5_sysfs_switch_info
2480                                                 (list[ns].ifindex,
2481                                                  &list[ns].info);
2482                         }
2483                         if (!ret && (list[ns].info.representor ^
2484                                      list[ns].info.master)) {
2485                                 ns++;
2486                         } else if ((nd == 1) &&
2487                                    !list[ns].info.representor &&
2488                                    !list[ns].info.master) {
2489                                 /*
2490                                  * Single IB device with
2491                                  * one physical port and
2492                                  * attached network device.
2493                                  * May be SRIOV is not enabled
2494                                  * or there is no representors.
2495                                  */
2496                                 DRV_LOG(INFO, "no E-Switch support detected");
2497                                 ns++;
2498                                 break;
2499                         }
2500                 }
2501                 if (!ns) {
2502                         DRV_LOG(ERR,
2503                                 "unable to recognize master/representors"
2504                                 " on the multiple IB devices");
2505                         rte_errno = ENOENT;
2506                         ret = -rte_errno;
2507                         goto exit;
2508                 }
2509                 /*
2510                  * New kernels may add the switch_id attribute for the case
2511                  * there is no E-Switch and we wrongly recognized the
2512                  * only device as master. Override this if there is the
2513                  * single device with single port and new device name
2514                  * format present.
2515                  */
2516                 if (nd == 1 &&
2517                     list[0].info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
2518                         list[0].info.master = 0;
2519                         list[0].info.representor = 0;
2520                 }
2521         }
2522         MLX5_ASSERT(ns);
2523         /*
2524          * Sort list to probe devices in natural order for users convenience
2525          * (i.e. master first, then representors from lowest to highest ID).
2526          */
2527         qsort(list, ns, sizeof(*list), mlx5_dev_spawn_data_cmp);
2528         /* Device specific configuration. */
2529         switch (pci_dev->id.device_id) {
2530         case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
2531         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
2532         case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
2533         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
2534         case PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF:
2535         case PCI_DEVICE_ID_MELLANOX_CONNECTX6VF:
2536         case PCI_DEVICE_ID_MELLANOX_CONNECTXVF:
2537                 dev_config_vf = 1;
2538                 break;
2539         default:
2540                 dev_config_vf = 0;
2541                 break;
2542         }
2543         if (eth_da.type != RTE_ETH_REPRESENTOR_NONE) {
2544                 /* Set devargs default values. */
2545                 if (eth_da.nb_mh_controllers == 0) {
2546                         eth_da.nb_mh_controllers = 1;
2547                         eth_da.mh_controllers[0] = 0;
2548                 }
2549                 if (eth_da.nb_ports == 0 && ns > 0) {
2550                         if (list[0].pf_bond >= 0 && list[0].info.representor)
2551                                 DRV_LOG(WARNING, "Representor on Bonding device should use pf#vf# syntax: %s",
2552                                         pci_dev->device.devargs->args);
2553                         eth_da.nb_ports = 1;
2554                         eth_da.ports[0] = list[0].info.pf_num;
2555                 }
2556                 if (eth_da.nb_representor_ports == 0) {
2557                         eth_da.nb_representor_ports = 1;
2558                         eth_da.representor_ports[0] = 0;
2559                 }
2560         }
2561         for (i = 0; i != ns; ++i) {
2562                 uint32_t restore;
2563
2564                 /* Default configuration. */
2565                 mlx5_os_config_default(&dev_config);
2566                 dev_config.vf = dev_config_vf;
2567                 dev_config.allow_duplicate_pattern = 1;
2568                 list[i].numa_node = pci_dev->device.numa_node;
2569                 list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device,
2570                                                  &list[i],
2571                                                  &dev_config,
2572                                                  &eth_da);
2573                 if (!list[i].eth_dev) {
2574                         if (rte_errno != EBUSY && rte_errno != EEXIST)
2575                                 break;
2576                         /* Device is disabled or already spawned. Ignore it. */
2577                         continue;
2578                 }
2579                 restore = list[i].eth_dev->data->dev_flags;
2580                 rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
2581                 /**
2582                  * Each representor has a dedicated interrupts vector.
2583                  * rte_eth_copy_pci_info() assigns PF interrupts handle to
2584                  * representor eth_dev object because representor and PF
2585                  * share the same PCI address.
2586                  * Override representor device with a dedicated
2587                  * interrupts handle here.
2588                  * Representor interrupts handle is released in mlx5_dev_stop().
2589                  */
2590                 if (list[i].info.representor) {
2591                         struct rte_intr_handle *intr_handle;
2592                         intr_handle = mlx5_malloc(MLX5_MEM_SYS | MLX5_MEM_ZERO,
2593                                                   sizeof(*intr_handle), 0,
2594                                                   SOCKET_ID_ANY);
2595                         if (!intr_handle) {
2596                                 DRV_LOG(ERR,
2597                                         "port %u failed to allocate memory for interrupt handler "
2598                                         "Rx interrupts will not be supported",
2599                                         i);
2600                                 rte_errno = ENOMEM;
2601                                 ret = -rte_errno;
2602                                 goto exit;
2603                         }
2604                         list[i].eth_dev->intr_handle = intr_handle;
2605                 }
2606                 /* Restore non-PCI flags cleared by the above call. */
2607                 list[i].eth_dev->data->dev_flags |= restore;
2608                 rte_eth_dev_probing_finish(list[i].eth_dev);
2609         }
2610         if (i != ns) {
2611                 DRV_LOG(ERR,
2612                         "probe of PCI device " PCI_PRI_FMT " aborted after"
2613                         " encountering an error: %s",
2614                         owner_pci.domain, owner_pci.bus,
2615                         owner_pci.devid, owner_pci.function,
2616                         strerror(rte_errno));
2617                 ret = -rte_errno;
2618                 /* Roll back. */
2619                 while (i--) {
2620                         if (!list[i].eth_dev)
2621                                 continue;
2622                         mlx5_dev_close(list[i].eth_dev);
2623                         /* mac_addrs must not be freed because in dev_private */
2624                         list[i].eth_dev->data->mac_addrs = NULL;
2625                         claim_zero(rte_eth_dev_release_port(list[i].eth_dev));
2626                 }
2627                 /* Restore original error. */
2628                 rte_errno = -ret;
2629         } else {
2630                 ret = 0;
2631         }
2632 exit:
2633         /*
2634          * Do the routine cleanup:
2635          * - close opened Netlink sockets
2636          * - free allocated spawn data array
2637          * - free the Infiniband device list
2638          */
2639         if (nl_rdma >= 0)
2640                 close(nl_rdma);
2641         if (nl_route >= 0)
2642                 close(nl_route);
2643         if (list)
2644                 mlx5_free(list);
2645         MLX5_ASSERT(ibv_list);
2646         mlx5_glue->free_device_list(ibv_list);
2647         return ret;
2648 }
2649
2650 static int
2651 mlx5_os_parse_eth_devargs(struct rte_device *dev,
2652                           struct rte_eth_devargs *eth_da)
2653 {
2654         int ret = 0;
2655
2656         if (dev->devargs == NULL)
2657                 return 0;
2658         memset(eth_da, 0, sizeof(*eth_da));
2659         /* Parse representor information first from class argument. */
2660         if (dev->devargs->cls_str)
2661                 ret = rte_eth_devargs_parse(dev->devargs->cls_str, eth_da);
2662         if (ret != 0) {
2663                 DRV_LOG(ERR, "failed to parse device arguments: %s",
2664                         dev->devargs->cls_str);
2665                 return -rte_errno;
2666         }
2667         if (eth_da->type == RTE_ETH_REPRESENTOR_NONE) {
2668                 /* Parse legacy device argument */
2669                 ret = rte_eth_devargs_parse(dev->devargs->args, eth_da);
2670                 if (ret) {
2671                         DRV_LOG(ERR, "failed to parse device arguments: %s",
2672                                 dev->devargs->args);
2673                         return -rte_errno;
2674                 }
2675         }
2676         return 0;
2677 }
2678
2679 /**
2680  * Callback to register a PCI device.
2681  *
2682  * This function spawns Ethernet devices out of a given PCI device.
2683  *
2684  * @param[in] pci_dev
2685  *   PCI device information.
2686  *
2687  * @return
2688  *   0 on success, a negative errno value otherwise and rte_errno is set.
2689  */
2690 static int
2691 mlx5_os_pci_probe(struct rte_pci_device *pci_dev)
2692 {
2693         struct rte_eth_devargs eth_da = { .nb_ports = 0 };
2694         int ret = 0;
2695         uint16_t p;
2696
2697         ret = mlx5_os_parse_eth_devargs(&pci_dev->device, &eth_da);
2698         if (ret != 0)
2699                 return ret;
2700
2701         if (eth_da.nb_ports > 0) {
2702                 /* Iterate all port if devargs pf is range: "pf[0-1]vf[...]". */
2703                 for (p = 0; p < eth_da.nb_ports; p++)
2704                         ret = mlx5_os_pci_probe_pf(pci_dev, &eth_da,
2705                                                    eth_da.ports[p]);
2706         } else {
2707                 ret = mlx5_os_pci_probe_pf(pci_dev, &eth_da, 0);
2708         }
2709         return ret;
2710 }
2711
2712 /* Probe a single SF device on auxiliary bus, no representor support. */
2713 static int
2714 mlx5_os_auxiliary_probe(struct rte_device *dev)
2715 {
2716         struct rte_eth_devargs eth_da = { .nb_ports = 0 };
2717         struct mlx5_dev_config config;
2718         struct mlx5_dev_spawn_data spawn = { .pf_bond = -1 };
2719         struct rte_auxiliary_device *adev = RTE_DEV_TO_AUXILIARY(dev);
2720         struct rte_eth_dev *eth_dev;
2721         int ret = 0;
2722
2723         /* Parse ethdev devargs. */
2724         ret = mlx5_os_parse_eth_devargs(dev, &eth_da);
2725         if (ret != 0)
2726                 return ret;
2727         /* Set default config data. */
2728         mlx5_os_config_default(&config);
2729         config.sf = 1;
2730         /* Init spawn data. */
2731         spawn.max_port = 1;
2732         spawn.phys_port = 1;
2733         spawn.phys_dev = mlx5_os_get_ibv_dev(dev);
2734         if (spawn.phys_dev == NULL)
2735                 return -rte_errno;
2736         ret = mlx5_auxiliary_get_ifindex(dev->name);
2737         if (ret < 0) {
2738                 DRV_LOG(ERR, "failed to get ethdev ifindex: %s", dev->name);
2739                 return ret;
2740         }
2741         spawn.ifindex = ret;
2742         spawn.numa_node = dev->numa_node;
2743         /* Spawn device. */
2744         eth_dev = mlx5_dev_spawn(dev, &spawn, &config, &eth_da);
2745         if (eth_dev == NULL)
2746                 return -rte_errno;
2747         /* Post create. */
2748         eth_dev->intr_handle = &adev->intr_handle;
2749         if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
2750                 eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
2751                 eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_RMV;
2752                 eth_dev->data->numa_node = dev->numa_node;
2753         }
2754         rte_eth_dev_probing_finish(eth_dev);
2755         return 0;
2756 }
2757
2758 /**
2759  * Net class driver callback to probe a device.
2760  *
2761  * This function probe PCI bus device(s) or a single SF on auxiliary bus.
2762  *
2763  * @param[in] dev
2764  *   Pointer to the generic device.
2765  *
2766  * @return
2767  *   0 on success, the function cannot fail.
2768  */
2769 int
2770 mlx5_os_net_probe(struct rte_device *dev)
2771 {
2772         int ret;
2773
2774         if (rte_eal_process_type() == RTE_PROC_PRIMARY)
2775                 mlx5_pmd_socket_init();
2776         ret = mlx5_init_once();
2777         if (ret) {
2778                 DRV_LOG(ERR, "unable to init PMD global data: %s",
2779                         strerror(rte_errno));
2780                 return -rte_errno;
2781         }
2782         if (mlx5_dev_is_pci(dev))
2783                 return mlx5_os_pci_probe(RTE_DEV_TO_PCI(dev));
2784         else
2785                 return mlx5_os_auxiliary_probe(dev);
2786 }
2787
2788 static int
2789 mlx5_config_doorbell_mapping_env(const struct mlx5_dev_config *config)
2790 {
2791         char *env;
2792         int value;
2793
2794         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
2795         /* Get environment variable to store. */
2796         env = getenv(MLX5_SHUT_UP_BF);
2797         value = env ? !!strcmp(env, "0") : MLX5_ARG_UNSET;
2798         if (config->dbnc == MLX5_ARG_UNSET)
2799                 setenv(MLX5_SHUT_UP_BF, MLX5_SHUT_UP_BF_DEFAULT, 1);
2800         else
2801                 setenv(MLX5_SHUT_UP_BF,
2802                        config->dbnc == MLX5_TXDB_NCACHED ? "1" : "0", 1);
2803         return value;
2804 }
2805
2806 static void
2807 mlx5_restore_doorbell_mapping_env(int value)
2808 {
2809         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
2810         /* Restore the original environment variable state. */
2811         if (value == MLX5_ARG_UNSET)
2812                 unsetenv(MLX5_SHUT_UP_BF);
2813         else
2814                 setenv(MLX5_SHUT_UP_BF, value ? "1" : "0", 1);
2815 }
2816
2817 /**
2818  * Extract pdn of PD object using DV API.
2819  *
2820  * @param[in] pd
2821  *   Pointer to the verbs PD object.
2822  * @param[out] pdn
2823  *   Pointer to the PD object number variable.
2824  *
2825  * @return
2826  *   0 on success, error value otherwise.
2827  */
2828 int
2829 mlx5_os_get_pdn(void *pd, uint32_t *pdn)
2830 {
2831 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
2832         struct mlx5dv_obj obj;
2833         struct mlx5dv_pd pd_info;
2834         int ret = 0;
2835
2836         obj.pd.in = pd;
2837         obj.pd.out = &pd_info;
2838         ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_PD);
2839         if (ret) {
2840                 DRV_LOG(DEBUG, "Fail to get PD object info");
2841                 return ret;
2842         }
2843         *pdn = pd_info.pdn;
2844         return 0;
2845 #else
2846         (void)pd;
2847         (void)pdn;
2848         return -ENOTSUP;
2849 #endif /* HAVE_IBV_FLOW_DV_SUPPORT */
2850 }
2851
2852 /**
2853  * Function API to open IB device.
2854  *
2855  * This function calls the Linux glue APIs to open a device.
2856  *
2857  * @param[in] spawn
2858  *   Pointer to the IB device attributes (name, port, etc).
2859  * @param[out] config
2860  *   Pointer to device configuration structure.
2861  * @param[out] sh
2862  *   Pointer to shared context structure.
2863  *
2864  * @return
2865  *   0 on success, a positive error value otherwise.
2866  */
2867 int
2868 mlx5_os_open_device(const struct mlx5_dev_spawn_data *spawn,
2869                      const struct mlx5_dev_config *config,
2870                      struct mlx5_dev_ctx_shared *sh)
2871 {
2872         int dbmap_env;
2873         int err = 0;
2874
2875         pthread_mutex_init(&sh->txpp.mutex, NULL);
2876         /*
2877          * Configure environment variable "MLX5_BF_SHUT_UP"
2878          * before the device creation. The rdma_core library
2879          * checks the variable at device creation and
2880          * stores the result internally.
2881          */
2882         dbmap_env = mlx5_config_doorbell_mapping_env(config);
2883         /* Try to open IB device with DV first, then usual Verbs. */
2884         errno = 0;
2885         sh->ctx = mlx5_glue->dv_open_device(spawn->phys_dev);
2886         if (sh->ctx) {
2887                 sh->devx = 1;
2888                 DRV_LOG(DEBUG, "DevX is supported");
2889                 /* The device is created, no need for environment. */
2890                 mlx5_restore_doorbell_mapping_env(dbmap_env);
2891         } else {
2892                 /* The environment variable is still configured. */
2893                 sh->ctx = mlx5_glue->open_device(spawn->phys_dev);
2894                 err = errno ? errno : ENODEV;
2895                 /*
2896                  * The environment variable is not needed anymore,
2897                  * all device creation attempts are completed.
2898                  */
2899                 mlx5_restore_doorbell_mapping_env(dbmap_env);
2900                 if (!sh->ctx)
2901                         return err;
2902                 DRV_LOG(DEBUG, "DevX is NOT supported");
2903                 err = 0;
2904         }
2905         if (!err && sh->ctx) {
2906                 /* Hint libmlx5 to use PMD allocator for data plane resources */
2907                 mlx5_glue->dv_set_context_attr(sh->ctx,
2908                         MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
2909                         (void *)((uintptr_t)&(struct mlx5dv_ctx_allocators){
2910                                 .alloc = &mlx5_alloc_verbs_buf,
2911                                 .free = &mlx5_free_verbs_buf,
2912                                 .data = sh,
2913                         }));
2914         }
2915         return err;
2916 }
2917
2918 /**
2919  * Install shared asynchronous device events handler.
2920  * This function is implemented to support event sharing
2921  * between multiple ports of single IB device.
2922  *
2923  * @param sh
2924  *   Pointer to mlx5_dev_ctx_shared object.
2925  */
2926 void
2927 mlx5_os_dev_shared_handler_install(struct mlx5_dev_ctx_shared *sh)
2928 {
2929         int ret;
2930         int flags;
2931
2932         sh->intr_handle.fd = -1;
2933         flags = fcntl(((struct ibv_context *)sh->ctx)->async_fd, F_GETFL);
2934         ret = fcntl(((struct ibv_context *)sh->ctx)->async_fd,
2935                     F_SETFL, flags | O_NONBLOCK);
2936         if (ret) {
2937                 DRV_LOG(INFO, "failed to change file descriptor async event"
2938                         " queue");
2939         } else {
2940                 sh->intr_handle.fd = ((struct ibv_context *)sh->ctx)->async_fd;
2941                 sh->intr_handle.type = RTE_INTR_HANDLE_EXT;
2942                 if (rte_intr_callback_register(&sh->intr_handle,
2943                                         mlx5_dev_interrupt_handler, sh)) {
2944                         DRV_LOG(INFO, "Fail to install the shared interrupt.");
2945                         sh->intr_handle.fd = -1;
2946                 }
2947         }
2948         if (sh->devx) {
2949 #ifdef HAVE_IBV_DEVX_ASYNC
2950                 sh->intr_handle_devx.fd = -1;
2951                 sh->devx_comp =
2952                         (void *)mlx5_glue->devx_create_cmd_comp(sh->ctx);
2953                 struct mlx5dv_devx_cmd_comp *devx_comp = sh->devx_comp;
2954                 if (!devx_comp) {
2955                         DRV_LOG(INFO, "failed to allocate devx_comp.");
2956                         return;
2957                 }
2958                 flags = fcntl(devx_comp->fd, F_GETFL);
2959                 ret = fcntl(devx_comp->fd, F_SETFL, flags | O_NONBLOCK);
2960                 if (ret) {
2961                         DRV_LOG(INFO, "failed to change file descriptor"
2962                                 " devx comp");
2963                         return;
2964                 }
2965                 sh->intr_handle_devx.fd = devx_comp->fd;
2966                 sh->intr_handle_devx.type = RTE_INTR_HANDLE_EXT;
2967                 if (rte_intr_callback_register(&sh->intr_handle_devx,
2968                                         mlx5_dev_interrupt_handler_devx, sh)) {
2969                         DRV_LOG(INFO, "Fail to install the devx shared"
2970                                 " interrupt.");
2971                         sh->intr_handle_devx.fd = -1;
2972                 }
2973 #endif /* HAVE_IBV_DEVX_ASYNC */
2974         }
2975 }
2976
2977 /**
2978  * Uninstall shared asynchronous device events handler.
2979  * This function is implemented to support event sharing
2980  * between multiple ports of single IB device.
2981  *
2982  * @param dev
2983  *   Pointer to mlx5_dev_ctx_shared object.
2984  */
2985 void
2986 mlx5_os_dev_shared_handler_uninstall(struct mlx5_dev_ctx_shared *sh)
2987 {
2988         if (sh->intr_handle.fd >= 0)
2989                 mlx5_intr_callback_unregister(&sh->intr_handle,
2990                                               mlx5_dev_interrupt_handler, sh);
2991 #ifdef HAVE_IBV_DEVX_ASYNC
2992         if (sh->intr_handle_devx.fd >= 0)
2993                 rte_intr_callback_unregister(&sh->intr_handle_devx,
2994                                   mlx5_dev_interrupt_handler_devx, sh);
2995         if (sh->devx_comp)
2996                 mlx5_glue->devx_destroy_cmd_comp(sh->devx_comp);
2997 #endif
2998 }
2999
3000 /**
3001  * Read statistics by a named counter.
3002  *
3003  * @param[in] priv
3004  *   Pointer to the private device data structure.
3005  * @param[in] ctr_name
3006  *   Pointer to the name of the statistic counter to read
3007  * @param[out] stat
3008  *   Pointer to read statistic value.
3009  * @return
3010  *   0 on success and stat is valud, 1 if failed to read the value
3011  *   rte_errno is set.
3012  *
3013  */
3014 int
3015 mlx5_os_read_dev_stat(struct mlx5_priv *priv, const char *ctr_name,
3016                       uint64_t *stat)
3017 {
3018         int fd;
3019
3020         if (priv->sh) {
3021                 if (priv->q_counters != NULL &&
3022                     strcmp(ctr_name, "out_of_buffer") == 0)
3023                         return mlx5_devx_cmd_queue_counter_query
3024                                         (priv->q_counters, 0, (uint32_t *)stat);
3025                 MKSTR(path, "%s/ports/%d/hw_counters/%s",
3026                       priv->sh->ibdev_path,
3027                       priv->dev_port,
3028                       ctr_name);
3029                 fd = open(path, O_RDONLY);
3030                 /*
3031                  * in switchdev the file location is not per port
3032                  * but rather in <ibdev_path>/hw_counters/<file_name>.
3033                  */
3034                 if (fd == -1) {
3035                         MKSTR(path1, "%s/hw_counters/%s",
3036                               priv->sh->ibdev_path,
3037                               ctr_name);
3038                         fd = open(path1, O_RDONLY);
3039                 }
3040                 if (fd != -1) {
3041                         char buf[21] = {'\0'};
3042                         ssize_t n = read(fd, buf, sizeof(buf));
3043
3044                         close(fd);
3045                         if (n != -1) {
3046                                 *stat = strtoull(buf, NULL, 10);
3047                                 return 0;
3048                         }
3049                 }
3050         }
3051         *stat = 0;
3052         return 1;
3053 }
3054
3055 /**
3056  * Set the reg_mr and dereg_mr call backs
3057  *
3058  * @param reg_mr_cb[out]
3059  *   Pointer to reg_mr func
3060  * @param dereg_mr_cb[out]
3061  *   Pointer to dereg_mr func
3062  *
3063  */
3064 void
3065 mlx5_os_set_reg_mr_cb(mlx5_reg_mr_t *reg_mr_cb,
3066                       mlx5_dereg_mr_t *dereg_mr_cb)
3067 {
3068         *reg_mr_cb = mlx5_mr_verbs_ops.reg_mr;
3069         *dereg_mr_cb = mlx5_mr_verbs_ops.dereg_mr;
3070 }
3071
3072 /**
3073  * Remove a MAC address from device
3074  *
3075  * @param dev
3076  *   Pointer to Ethernet device structure.
3077  * @param index
3078  *   MAC address index.
3079  */
3080 void
3081 mlx5_os_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
3082 {
3083         struct mlx5_priv *priv = dev->data->dev_private;
3084         const int vf = priv->config.vf;
3085
3086         if (vf)
3087                 mlx5_nl_mac_addr_remove(priv->nl_socket_route,
3088                                         mlx5_ifindex(dev), priv->mac_own,
3089                                         &dev->data->mac_addrs[index], index);
3090 }
3091
3092 /**
3093  * Adds a MAC address to the device
3094  *
3095  * @param dev
3096  *   Pointer to Ethernet device structure.
3097  * @param mac_addr
3098  *   MAC address to register.
3099  * @param index
3100  *   MAC address index.
3101  *
3102  * @return
3103  *   0 on success, a negative errno value otherwise
3104  */
3105 int
3106 mlx5_os_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
3107                      uint32_t index)
3108 {
3109         struct mlx5_priv *priv = dev->data->dev_private;
3110         const int vf = priv->config.vf;
3111         int ret = 0;
3112
3113         if (vf)
3114                 ret = mlx5_nl_mac_addr_add(priv->nl_socket_route,
3115                                            mlx5_ifindex(dev), priv->mac_own,
3116                                            mac, index);
3117         return ret;
3118 }
3119
3120 /**
3121  * Modify a VF MAC address
3122  *
3123  * @param priv
3124  *   Pointer to device private data.
3125  * @param mac_addr
3126  *   MAC address to modify into.
3127  * @param iface_idx
3128  *   Net device interface index
3129  * @param vf_index
3130  *   VF index
3131  *
3132  * @return
3133  *   0 on success, a negative errno value otherwise
3134  */
3135 int
3136 mlx5_os_vf_mac_addr_modify(struct mlx5_priv *priv,
3137                            unsigned int iface_idx,
3138                            struct rte_ether_addr *mac_addr,
3139                            int vf_index)
3140 {
3141         return mlx5_nl_vf_mac_addr_modify
3142                 (priv->nl_socket_route, iface_idx, mac_addr, vf_index);
3143 }
3144
3145 /**
3146  * Set device promiscuous mode
3147  *
3148  * @param dev
3149  *   Pointer to Ethernet device structure.
3150  * @param enable
3151  *   0 - promiscuous is disabled, otherwise - enabled
3152  *
3153  * @return
3154  *   0 on success, a negative error value otherwise
3155  */
3156 int
3157 mlx5_os_set_promisc(struct rte_eth_dev *dev, int enable)
3158 {
3159         struct mlx5_priv *priv = dev->data->dev_private;
3160
3161         return mlx5_nl_promisc(priv->nl_socket_route,
3162                                mlx5_ifindex(dev), !!enable);
3163 }
3164
3165 /**
3166  * Set device promiscuous mode
3167  *
3168  * @param dev
3169  *   Pointer to Ethernet device structure.
3170  * @param enable
3171  *   0 - all multicase is disabled, otherwise - enabled
3172  *
3173  * @return
3174  *   0 on success, a negative error value otherwise
3175  */
3176 int
3177 mlx5_os_set_allmulti(struct rte_eth_dev *dev, int enable)
3178 {
3179         struct mlx5_priv *priv = dev->data->dev_private;
3180
3181         return mlx5_nl_allmulti(priv->nl_socket_route,
3182                                 mlx5_ifindex(dev), !!enable);
3183 }
3184
3185 /**
3186  * Flush device MAC addresses
3187  *
3188  * @param dev
3189  *   Pointer to Ethernet device structure.
3190  *
3191  */
3192 void
3193 mlx5_os_mac_addr_flush(struct rte_eth_dev *dev)
3194 {
3195         struct mlx5_priv *priv = dev->data->dev_private;
3196
3197         mlx5_nl_mac_addr_flush(priv->nl_socket_route, mlx5_ifindex(dev),
3198                                dev->data->mac_addrs,
3199                                MLX5_MAX_MAC_ADDRESSES, priv->mac_own);
3200 }