1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2015 6WIND S.A.
3 * Copyright 2015 Mellanox Technologies, Ltd
13 #include <rte_malloc.h>
14 #include <ethdev_driver.h>
16 #include <rte_bus_pci.h>
17 #include <rte_common.h>
18 #include <rte_kvargs.h>
19 #include <rte_rwlock.h>
20 #include <rte_spinlock.h>
21 #include <rte_string_fns.h>
22 #include <rte_eal_paging.h>
23 #include <rte_alarm.h>
24 #include <rte_cycles.h>
26 #include <mlx5_glue.h>
27 #include <mlx5_devx_cmds.h>
28 #include <mlx5_common.h>
29 #include <mlx5_common_os.h>
30 #include <mlx5_common_mp.h>
31 #include <mlx5_malloc.h>
33 #include "mlx5_defs.h"
35 #include "mlx5_utils.h"
36 #include "mlx5_rxtx.h"
39 #include "mlx5_autoconf.h"
40 #include "mlx5_flow.h"
41 #include "mlx5_flow_os.h"
42 #include "rte_pmd_mlx5.h"
44 #define MLX5_ETH_DRIVER_NAME mlx5_eth
46 /* Device parameter to enable RX completion queue compression. */
47 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
49 /* Device parameter to enable padding Rx packet to cacheline size. */
50 #define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
52 /* Device parameter to enable Multi-Packet Rx queue. */
53 #define MLX5_RX_MPRQ_EN "mprq_en"
55 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
56 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
58 /* Device parameter to configure log 2 of the stride size for MPRQ. */
59 #define MLX5_RX_MPRQ_LOG_STRIDE_SIZE "mprq_log_stride_size"
61 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
62 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
64 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
65 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
67 /* Device parameter to configure inline send. Deprecated, ignored.*/
68 #define MLX5_TXQ_INLINE "txq_inline"
70 /* Device parameter to limit packet size to inline with ordinary SEND. */
71 #define MLX5_TXQ_INLINE_MAX "txq_inline_max"
73 /* Device parameter to configure minimal data size to inline. */
74 #define MLX5_TXQ_INLINE_MIN "txq_inline_min"
76 /* Device parameter to limit packet size to inline with Enhanced MPW. */
77 #define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
80 * Device parameter to configure the number of TX queues threshold for
81 * enabling inline send.
83 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
86 * Device parameter to configure the number of TX queues threshold for
87 * enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
89 #define MLX5_TXQS_MAX_VEC "txqs_max_vec"
91 /* Device parameter to enable multi-packet send WQEs. */
92 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
95 * Device parameter to include 2 dsegs in the title WQEBB.
96 * Deprecated, ignored.
98 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
101 * Device parameter to limit the size of inlining packet.
102 * Deprecated, ignored.
104 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
107 * Device parameter to enable Tx scheduling on timestamps
108 * and specify the packet pacing granularity in nanoseconds.
110 #define MLX5_TX_PP "tx_pp"
113 * Device parameter to specify skew in nanoseconds on Tx datapath,
114 * it represents the time between SQ start WQE processing and
115 * appearing actual packet data on the wire.
117 #define MLX5_TX_SKEW "tx_skew"
120 * Device parameter to enable hardware Tx vector.
121 * Deprecated, ignored (no vectorized Tx routines anymore).
123 #define MLX5_TX_VEC_EN "tx_vec_en"
125 /* Device parameter to enable hardware Rx vector. */
126 #define MLX5_RX_VEC_EN "rx_vec_en"
128 /* Allow L3 VXLAN flow creation. */
129 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
131 /* Activate DV E-Switch flow steering. */
132 #define MLX5_DV_ESW_EN "dv_esw_en"
134 /* Activate DV flow steering. */
135 #define MLX5_DV_FLOW_EN "dv_flow_en"
137 /* Enable extensive flow metadata support. */
138 #define MLX5_DV_XMETA_EN "dv_xmeta_en"
140 /* Device parameter to let the user manage the lacp traffic of bonded device */
141 #define MLX5_LACP_BY_USER "lacp_by_user"
143 /* Activate Netlink support in VF mode. */
144 #define MLX5_VF_NL_EN "vf_nl_en"
146 /* Select port representors to instantiate. */
147 #define MLX5_REPRESENTOR "representor"
149 /* Device parameter to configure the maximum number of dump files per queue. */
150 #define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
152 /* Configure timeout of LRO session (in microseconds). */
153 #define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
156 * Device parameter to configure the total data buffer size for a single
157 * hairpin queue (logarithm value).
159 #define MLX5_HP_BUF_SIZE "hp_buf_log_sz"
161 /* Flow memory reclaim mode. */
162 #define MLX5_RECLAIM_MEM "reclaim_mem_mode"
164 /* Decap will be used or not. */
165 #define MLX5_DECAP_EN "decap_en"
167 /* Device parameter to configure allow or prevent duplicate rules pattern. */
168 #define MLX5_ALLOW_DUPLICATE_PATTERN "allow_duplicate_pattern"
170 /* Device parameter to configure the delay drop when creating Rxqs. */
171 #define MLX5_DELAY_DROP "delay_drop"
173 /* Shared memory between primary and secondary processes. */
174 struct mlx5_shared_data *mlx5_shared_data;
176 /** Driver-specific log messages type. */
179 static LIST_HEAD(, mlx5_dev_ctx_shared) mlx5_dev_ctx_list =
180 LIST_HEAD_INITIALIZER();
181 static pthread_mutex_t mlx5_dev_ctx_list_mutex;
182 static const struct mlx5_indexed_pool_config mlx5_ipool_cfg[] = {
183 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
184 [MLX5_IPOOL_DECAP_ENCAP] = {
185 .size = sizeof(struct mlx5_flow_dv_encap_decap_resource),
191 .malloc = mlx5_malloc,
193 .type = "mlx5_encap_decap_ipool",
195 [MLX5_IPOOL_PUSH_VLAN] = {
196 .size = sizeof(struct mlx5_flow_dv_push_vlan_action_resource),
202 .malloc = mlx5_malloc,
204 .type = "mlx5_push_vlan_ipool",
207 .size = sizeof(struct mlx5_flow_dv_tag_resource),
213 .per_core_cache = (1 << 16),
214 .malloc = mlx5_malloc,
216 .type = "mlx5_tag_ipool",
218 [MLX5_IPOOL_PORT_ID] = {
219 .size = sizeof(struct mlx5_flow_dv_port_id_action_resource),
225 .malloc = mlx5_malloc,
227 .type = "mlx5_port_id_ipool",
229 [MLX5_IPOOL_JUMP] = {
230 .size = sizeof(struct mlx5_flow_tbl_data_entry),
236 .malloc = mlx5_malloc,
238 .type = "mlx5_jump_ipool",
240 [MLX5_IPOOL_SAMPLE] = {
241 .size = sizeof(struct mlx5_flow_dv_sample_resource),
247 .malloc = mlx5_malloc,
249 .type = "mlx5_sample_ipool",
251 [MLX5_IPOOL_DEST_ARRAY] = {
252 .size = sizeof(struct mlx5_flow_dv_dest_array_resource),
258 .malloc = mlx5_malloc,
260 .type = "mlx5_dest_array_ipool",
262 [MLX5_IPOOL_TUNNEL_ID] = {
263 .size = sizeof(struct mlx5_flow_tunnel),
264 .trunk_size = MLX5_MAX_TUNNELS,
267 .type = "mlx5_tunnel_offload",
269 [MLX5_IPOOL_TNL_TBL_ID] = {
272 .type = "mlx5_flow_tnl_tbl_ipool",
277 * The ipool index should grow continually from small to big,
278 * for meter idx, so not set grow_trunk to avoid meter index
279 * not jump continually.
281 .size = sizeof(struct mlx5_legacy_flow_meter),
285 .malloc = mlx5_malloc,
287 .type = "mlx5_meter_ipool",
290 .size = sizeof(struct mlx5_flow_mreg_copy_resource),
296 .malloc = mlx5_malloc,
298 .type = "mlx5_mcp_ipool",
300 [MLX5_IPOOL_HRXQ] = {
301 .size = (sizeof(struct mlx5_hrxq) + MLX5_RSS_HASH_KEY_LEN),
307 .malloc = mlx5_malloc,
309 .type = "mlx5_hrxq_ipool",
311 [MLX5_IPOOL_MLX5_FLOW] = {
313 * MLX5_IPOOL_MLX5_FLOW size varies for DV and VERBS flows.
314 * It set in run time according to PCI function configuration.
322 .per_core_cache = 1 << 19,
323 .malloc = mlx5_malloc,
325 .type = "mlx5_flow_handle_ipool",
327 [MLX5_IPOOL_RTE_FLOW] = {
328 .size = sizeof(struct rte_flow),
332 .malloc = mlx5_malloc,
334 .type = "rte_flow_ipool",
336 [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID] = {
339 .type = "mlx5_flow_rss_id_ipool",
341 [MLX5_IPOOL_RSS_SHARED_ACTIONS] = {
342 .size = sizeof(struct mlx5_shared_action_rss),
348 .malloc = mlx5_malloc,
350 .type = "mlx5_shared_action_rss",
352 [MLX5_IPOOL_MTR_POLICY] = {
354 * The ipool index should grow continually from small to big,
355 * for policy idx, so not set grow_trunk to avoid policy index
356 * not jump continually.
358 .size = sizeof(struct mlx5_flow_meter_sub_policy),
362 .malloc = mlx5_malloc,
364 .type = "mlx5_meter_policy_ipool",
368 #define MLX5_FLOW_MIN_ID_POOL_SIZE 512
369 #define MLX5_ID_GENERATION_ARRAY_FACTOR 16
371 #define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 1024
374 * Decide whether representor ID is a HPF(host PF) port on BF2.
377 * Pointer to Ethernet device structure.
380 * Non-zero if HPF, otherwise 0.
383 mlx5_is_hpf(struct rte_eth_dev *dev)
385 struct mlx5_priv *priv = dev->data->dev_private;
386 uint16_t repr = MLX5_REPRESENTOR_REPR(priv->representor_id);
387 int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
389 return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_VF &&
390 MLX5_REPRESENTOR_REPR(-1) == repr;
394 * Decide whether representor ID is a SF port representor.
397 * Pointer to Ethernet device structure.
400 * Non-zero if HPF, otherwise 0.
403 mlx5_is_sf_repr(struct rte_eth_dev *dev)
405 struct mlx5_priv *priv = dev->data->dev_private;
406 int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
408 return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_SF;
412 * Initialize the ASO aging management structure.
415 * Pointer to mlx5_dev_ctx_shared object to free
418 * 0 on success, a negative errno value otherwise and rte_errno is set.
421 mlx5_flow_aso_age_mng_init(struct mlx5_dev_ctx_shared *sh)
427 sh->aso_age_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->aso_age_mng),
428 RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
429 if (!sh->aso_age_mng) {
430 DRV_LOG(ERR, "aso_age_mng allocation was failed.");
434 err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_FLOW_HIT);
436 mlx5_free(sh->aso_age_mng);
439 rte_rwlock_init(&sh->aso_age_mng->resize_rwl);
440 rte_spinlock_init(&sh->aso_age_mng->free_sl);
441 LIST_INIT(&sh->aso_age_mng->free);
446 * Close and release all the resources of the ASO aging management structure.
449 * Pointer to mlx5_dev_ctx_shared object to free.
452 mlx5_flow_aso_age_mng_close(struct mlx5_dev_ctx_shared *sh)
456 mlx5_aso_flow_hit_queue_poll_stop(sh);
457 mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_FLOW_HIT);
458 if (sh->aso_age_mng->pools) {
459 struct mlx5_aso_age_pool *pool;
461 for (i = 0; i < sh->aso_age_mng->next; ++i) {
462 pool = sh->aso_age_mng->pools[i];
463 claim_zero(mlx5_devx_cmd_destroy
464 (pool->flow_hit_aso_obj));
465 for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j)
466 if (pool->actions[j].dr_action)
468 (mlx5_flow_os_destroy_flow_action
469 (pool->actions[j].dr_action));
472 mlx5_free(sh->aso_age_mng->pools);
474 mlx5_free(sh->aso_age_mng);
478 * Initialize the shared aging list information per port.
481 * Pointer to mlx5_dev_ctx_shared object.
484 mlx5_flow_aging_init(struct mlx5_dev_ctx_shared *sh)
487 struct mlx5_age_info *age_info;
489 for (i = 0; i < sh->max_port; i++) {
490 age_info = &sh->port[i].age_info;
492 TAILQ_INIT(&age_info->aged_counters);
493 LIST_INIT(&age_info->aged_aso);
494 rte_spinlock_init(&age_info->aged_sl);
495 MLX5_AGE_SET(age_info, MLX5_AGE_TRIGGER);
500 * DV flow counter mode detect and config.
503 * Pointer to rte_eth_dev structure.
507 mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
509 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
510 struct mlx5_priv *priv = dev->data->dev_private;
511 struct mlx5_dev_ctx_shared *sh = priv->sh;
512 struct mlx5_hca_attr *hca_attr = &sh->cdev->config.hca_attr;
515 #ifndef HAVE_IBV_DEVX_ASYNC
519 if (!sh->cdev->config.devx || !sh->config.dv_flow_en ||
520 !hca_attr->flow_counters_dump ||
521 !(hca_attr->flow_counter_bulk_alloc_bitmap & 0x4) ||
522 (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
526 DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
527 "counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
528 hca_attr->flow_counters_dump,
529 hca_attr->flow_counter_bulk_alloc_bitmap);
530 /* Initialize fallback mode only on the port initializes sh. */
532 sh->cmng.counter_fallback = fallback;
533 else if (fallback != sh->cmng.counter_fallback)
534 DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
535 "with others:%d.", PORT_ID(priv), fallback);
540 * Initialize the counters management structure.
543 * Pointer to mlx5_dev_ctx_shared object to free
546 mlx5_flow_counters_mng_init(struct mlx5_dev_ctx_shared *sh)
550 memset(&sh->cmng, 0, sizeof(sh->cmng));
551 TAILQ_INIT(&sh->cmng.flow_counters);
552 sh->cmng.min_id = MLX5_CNT_BATCH_OFFSET;
553 sh->cmng.max_id = -1;
554 sh->cmng.last_pool_idx = POOL_IDX_INVALID;
555 rte_spinlock_init(&sh->cmng.pool_update_sl);
556 for (i = 0; i < MLX5_COUNTER_TYPE_MAX; i++) {
557 TAILQ_INIT(&sh->cmng.counters[i]);
558 rte_spinlock_init(&sh->cmng.csl[i]);
563 * Destroy all the resources allocated for a counter memory management.
566 * Pointer to the memory management structure.
569 mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
571 uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
573 LIST_REMOVE(mng, next);
574 mlx5_os_wrapped_mkey_destroy(&mng->wm);
579 * Close and release all the resources of the counters management.
582 * Pointer to mlx5_dev_ctx_shared object to free.
585 mlx5_flow_counters_mng_close(struct mlx5_dev_ctx_shared *sh)
587 struct mlx5_counter_stats_mem_mng *mng;
593 rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
594 if (rte_errno != EINPROGRESS)
599 if (sh->cmng.pools) {
600 struct mlx5_flow_counter_pool *pool;
601 uint16_t n_valid = sh->cmng.n_valid;
602 bool fallback = sh->cmng.counter_fallback;
604 for (i = 0; i < n_valid; ++i) {
605 pool = sh->cmng.pools[i];
606 if (!fallback && pool->min_dcs)
607 claim_zero(mlx5_devx_cmd_destroy
609 for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
610 struct mlx5_flow_counter *cnt =
611 MLX5_POOL_GET_CNT(pool, j);
615 (mlx5_flow_os_destroy_flow_action
617 if (fallback && MLX5_POOL_GET_CNT
618 (pool, j)->dcs_when_free)
619 claim_zero(mlx5_devx_cmd_destroy
620 (cnt->dcs_when_free));
624 mlx5_free(sh->cmng.pools);
626 mng = LIST_FIRST(&sh->cmng.mem_mngs);
628 mlx5_flow_destroy_counter_stat_mem_mng(mng);
629 mng = LIST_FIRST(&sh->cmng.mem_mngs);
631 memset(&sh->cmng, 0, sizeof(sh->cmng));
635 * Initialize the aso flow meters management structure.
638 * Pointer to mlx5_dev_ctx_shared object to free
641 mlx5_aso_flow_mtrs_mng_init(struct mlx5_dev_ctx_shared *sh)
644 sh->mtrmng = mlx5_malloc(MLX5_MEM_ZERO,
646 RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
649 "meter management allocation was failed.");
653 if (sh->meter_aso_en) {
654 rte_spinlock_init(&sh->mtrmng->pools_mng.mtrsl);
655 rte_rwlock_init(&sh->mtrmng->pools_mng.resize_mtrwl);
656 LIST_INIT(&sh->mtrmng->pools_mng.meters);
658 sh->mtrmng->def_policy_id = MLX5_INVALID_POLICY_ID;
664 * Close and release all the resources of
665 * the ASO flow meter management structure.
668 * Pointer to mlx5_dev_ctx_shared object to free.
671 mlx5_aso_flow_mtrs_mng_close(struct mlx5_dev_ctx_shared *sh)
673 struct mlx5_aso_mtr_pool *mtr_pool;
674 struct mlx5_flow_mtr_mng *mtrmng = sh->mtrmng;
676 #ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
677 struct mlx5_aso_mtr *aso_mtr;
679 #endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
681 if (sh->meter_aso_en) {
682 mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_POLICER);
683 idx = mtrmng->pools_mng.n_valid;
685 mtr_pool = mtrmng->pools_mng.pools[idx];
686 #ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
687 for (i = 0; i < MLX5_ASO_MTRS_PER_POOL; i++) {
688 aso_mtr = &mtr_pool->mtrs[i];
689 if (aso_mtr->fm.meter_action)
691 (mlx5_glue->destroy_flow_action
692 (aso_mtr->fm.meter_action));
694 #endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
695 claim_zero(mlx5_devx_cmd_destroy
696 (mtr_pool->devx_obj));
697 mtrmng->pools_mng.n_valid--;
700 mlx5_free(sh->mtrmng->pools_mng.pools);
702 mlx5_free(sh->mtrmng);
706 /* Send FLOW_AGED event if needed. */
708 mlx5_age_event_prepare(struct mlx5_dev_ctx_shared *sh)
710 struct mlx5_age_info *age_info;
713 for (i = 0; i < sh->max_port; i++) {
714 age_info = &sh->port[i].age_info;
715 if (!MLX5_AGE_GET(age_info, MLX5_AGE_EVENT_NEW))
717 MLX5_AGE_UNSET(age_info, MLX5_AGE_EVENT_NEW);
718 if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER)) {
719 MLX5_AGE_UNSET(age_info, MLX5_AGE_TRIGGER);
720 rte_eth_dev_callback_process
721 (&rte_eth_devices[sh->port[i].devx_ih_port_id],
722 RTE_ETH_EVENT_FLOW_AGED, NULL);
728 * Initialize the ASO connection tracking structure.
731 * Pointer to mlx5_dev_ctx_shared object.
734 * 0 on success, a negative errno value otherwise and rte_errno is set.
737 mlx5_flow_aso_ct_mng_init(struct mlx5_dev_ctx_shared *sh)
743 sh->ct_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->ct_mng),
744 RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
746 DRV_LOG(ERR, "ASO CT management allocation failed.");
750 err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
752 mlx5_free(sh->ct_mng);
753 /* rte_errno should be extracted from the failure. */
757 rte_spinlock_init(&sh->ct_mng->ct_sl);
758 rte_rwlock_init(&sh->ct_mng->resize_rwl);
759 LIST_INIT(&sh->ct_mng->free_cts);
764 * Close and release all the resources of the
765 * ASO connection tracking management structure.
768 * Pointer to mlx5_dev_ctx_shared object to free.
771 mlx5_flow_aso_ct_mng_close(struct mlx5_dev_ctx_shared *sh)
773 struct mlx5_aso_ct_pools_mng *mng = sh->ct_mng;
774 struct mlx5_aso_ct_pool *ct_pool;
775 struct mlx5_aso_ct_action *ct;
781 mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
785 ct_pool = mng->pools[idx];
786 for (i = 0; i < MLX5_ASO_CT_ACTIONS_PER_POOL; i++) {
787 ct = &ct_pool->actions[i];
788 val = __atomic_fetch_sub(&ct->refcnt, 1,
790 MLX5_ASSERT(val == 1);
793 #ifdef HAVE_MLX5_DR_ACTION_ASO_CT
794 if (ct->dr_action_orig)
795 claim_zero(mlx5_glue->destroy_flow_action
796 (ct->dr_action_orig));
797 if (ct->dr_action_rply)
798 claim_zero(mlx5_glue->destroy_flow_action
799 (ct->dr_action_rply));
802 claim_zero(mlx5_devx_cmd_destroy(ct_pool->devx_obj));
804 DRV_LOG(DEBUG, "%u ASO CT objects are being used in the pool %u",
808 /* in case of failure. */
811 mlx5_free(mng->pools);
813 /* Management structure must be cleared to 0s during allocation. */
818 * Initialize the flow resources' indexed mempool.
821 * Pointer to mlx5_dev_ctx_shared object.
824 mlx5_flow_ipool_create(struct mlx5_dev_ctx_shared *sh)
827 struct mlx5_indexed_pool_config cfg;
829 for (i = 0; i < MLX5_IPOOL_MAX; ++i) {
830 cfg = mlx5_ipool_cfg[i];
835 * Set MLX5_IPOOL_MLX5_FLOW ipool size
836 * according to PCI function flow configuration.
838 case MLX5_IPOOL_MLX5_FLOW:
839 cfg.size = sh->config.dv_flow_en ?
840 sizeof(struct mlx5_flow_handle) :
841 MLX5_FLOW_HANDLE_VERBS_SIZE;
844 if (sh->config.reclaim_mode) {
845 cfg.release_mem_en = 1;
846 cfg.per_core_cache = 0;
848 cfg.release_mem_en = 0;
850 sh->ipool[i] = mlx5_ipool_create(&cfg);
856 * Release the flow resources' indexed mempool.
859 * Pointer to mlx5_dev_ctx_shared object.
862 mlx5_flow_ipool_destroy(struct mlx5_dev_ctx_shared *sh)
866 for (i = 0; i < MLX5_IPOOL_MAX; ++i)
867 mlx5_ipool_destroy(sh->ipool[i]);
868 for (i = 0; i < MLX5_MAX_MODIFY_NUM; ++i)
869 if (sh->mdh_ipools[i])
870 mlx5_ipool_destroy(sh->mdh_ipools[i]);
874 * Check if dynamic flex parser for eCPRI already exists.
877 * Pointer to Ethernet device structure.
880 * true on exists, false on not.
883 mlx5_flex_parser_ecpri_exist(struct rte_eth_dev *dev)
885 struct mlx5_priv *priv = dev->data->dev_private;
886 struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
892 * Allocation of a flex parser for eCPRI. Once created, this parser related
893 * resources will be held until the device is closed.
896 * Pointer to Ethernet device structure.
899 * 0 on success, a negative errno value otherwise and rte_errno is set.
902 mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
904 struct mlx5_priv *priv = dev->data->dev_private;
905 struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
906 struct mlx5_devx_graph_node_attr node = {
907 .modify_field_select = 0,
912 if (!priv->sh->cdev->config.hca_attr.parse_graph_flex_node) {
913 DRV_LOG(ERR, "Dynamic flex parser is not supported "
914 "for device %s.", priv->dev_data->name);
917 node.header_length_mode = MLX5_GRAPH_NODE_LEN_FIXED;
918 /* 8 bytes now: 4B common header + 4B message body header. */
919 node.header_length_base_value = 0x8;
920 /* After MAC layer: Ether / VLAN. */
921 node.in[0].arc_parse_graph_node = MLX5_GRAPH_ARC_NODE_MAC;
922 /* Type of compared condition should be 0xAEFE in the L2 layer. */
923 node.in[0].compare_condition_value = RTE_ETHER_TYPE_ECPRI;
924 /* Sample #0: type in common header. */
925 node.sample[0].flow_match_sample_en = 1;
927 node.sample[0].flow_match_sample_offset_mode = 0x0;
928 /* Only the 2nd byte will be used. */
929 node.sample[0].flow_match_sample_field_base_offset = 0x0;
930 /* Sample #1: message payload. */
931 node.sample[1].flow_match_sample_en = 1;
933 node.sample[1].flow_match_sample_offset_mode = 0x0;
935 * Only the first two bytes will be used right now, and its offset will
936 * start after the common header that with the length of a DW(u32).
938 node.sample[1].flow_match_sample_field_base_offset = sizeof(uint32_t);
939 prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->cdev->ctx, &node);
941 DRV_LOG(ERR, "Failed to create flex parser node object.");
942 return (rte_errno == 0) ? -ENODEV : -rte_errno;
945 ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num);
947 DRV_LOG(ERR, "Failed to query sample IDs.");
948 return (rte_errno == 0) ? -ENODEV : -rte_errno;
950 prf->offset[0] = 0x0;
951 prf->offset[1] = sizeof(uint32_t);
952 prf->ids[0] = ids[0];
953 prf->ids[1] = ids[1];
958 * Destroy the flex parser node, including the parser itself, input / output
959 * arcs and DW samples. Resources could be reused then.
962 * Pointer to Ethernet device structure.
965 mlx5_flex_parser_ecpri_release(struct rte_eth_dev *dev)
967 struct mlx5_priv *priv = dev->data->dev_private;
968 struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
971 mlx5_devx_cmd_destroy(prf->obj);
976 mlx5_get_supported_sw_parsing_offloads(const struct mlx5_hca_attr *attr)
978 uint32_t sw_parsing_offloads = 0;
981 sw_parsing_offloads |= MLX5_SW_PARSING_CAP;
983 sw_parsing_offloads |= MLX5_SW_PARSING_CSUM_CAP;
986 sw_parsing_offloads |= MLX5_SW_PARSING_TSO_CAP;
988 return sw_parsing_offloads;
992 mlx5_get_supported_tunneling_offloads(const struct mlx5_hca_attr *attr)
994 uint32_t tn_offloads = 0;
996 if (attr->tunnel_stateless_vxlan)
997 tn_offloads |= MLX5_TUNNELED_OFFLOADS_VXLAN_CAP;
998 if (attr->tunnel_stateless_gre)
999 tn_offloads |= MLX5_TUNNELED_OFFLOADS_GRE_CAP;
1000 if (attr->tunnel_stateless_geneve_rx)
1001 tn_offloads |= MLX5_TUNNELED_OFFLOADS_GENEVE_CAP;
1005 /* Fill all fields of UAR structure. */
1007 mlx5_rxtx_uars_prepare(struct mlx5_dev_ctx_shared *sh)
1011 ret = mlx5_devx_uar_prepare(sh->cdev, &sh->tx_uar);
1013 DRV_LOG(ERR, "Failed to prepare Tx DevX UAR.");
1016 MLX5_ASSERT(sh->tx_uar.obj);
1017 MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar.obj));
1018 ret = mlx5_devx_uar_prepare(sh->cdev, &sh->rx_uar);
1020 DRV_LOG(ERR, "Failed to prepare Rx DevX UAR.");
1021 mlx5_devx_uar_release(&sh->tx_uar);
1024 MLX5_ASSERT(sh->rx_uar.obj);
1025 MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->rx_uar.obj));
1030 mlx5_rxtx_uars_release(struct mlx5_dev_ctx_shared *sh)
1032 mlx5_devx_uar_release(&sh->rx_uar);
1033 mlx5_devx_uar_release(&sh->tx_uar);
1037 * rte_mempool_walk() callback to unregister Rx mempools.
1038 * It used when implicit mempool registration is disabled.
1041 * The mempool being walked.
1043 * Pointer to the device shared context.
1046 mlx5_dev_ctx_shared_rx_mempool_unregister_cb(struct rte_mempool *mp, void *arg)
1048 struct mlx5_dev_ctx_shared *sh = arg;
1050 mlx5_dev_mempool_unregister(sh->cdev, mp);
1054 * Callback used when implicit mempool registration is disabled
1055 * in order to track Rx mempool destruction.
1058 * Mempool life cycle event.
1060 * An Rx mempool registered explicitly when the port is started.
1062 * Pointer to a device shared context.
1065 mlx5_dev_ctx_shared_rx_mempool_event_cb(enum rte_mempool_event event,
1066 struct rte_mempool *mp, void *arg)
1068 struct mlx5_dev_ctx_shared *sh = arg;
1070 if (event == RTE_MEMPOOL_EVENT_DESTROY)
1071 mlx5_dev_mempool_unregister(sh->cdev, mp);
1075 mlx5_dev_ctx_shared_mempool_subscribe(struct rte_eth_dev *dev)
1077 struct mlx5_priv *priv = dev->data->dev_private;
1078 struct mlx5_dev_ctx_shared *sh = priv->sh;
1081 /* Check if we only need to track Rx mempool destruction. */
1082 if (!sh->cdev->config.mr_mempool_reg_en) {
1083 ret = rte_mempool_event_callback_register
1084 (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
1085 return ret == 0 || rte_errno == EEXIST ? 0 : ret;
1087 return mlx5_dev_mempool_subscribe(sh->cdev);
1091 * Set up multiple TISs with different affinities according to
1092 * number of bonding ports
1095 * Pointer of shared context.
1098 * Zero on success, -1 otherwise.
1101 mlx5_setup_tis(struct mlx5_dev_ctx_shared *sh)
1104 struct mlx5_devx_lag_context lag_ctx = { 0 };
1105 struct mlx5_devx_tis_attr tis_attr = { 0 };
1107 tis_attr.transport_domain = sh->td->id;
1108 if (sh->bond.n_port) {
1109 if (!mlx5_devx_cmd_query_lag(sh->cdev->ctx, &lag_ctx)) {
1110 sh->lag.tx_remap_affinity[0] =
1111 lag_ctx.tx_remap_affinity_1;
1112 sh->lag.tx_remap_affinity[1] =
1113 lag_ctx.tx_remap_affinity_2;
1114 sh->lag.affinity_mode = lag_ctx.port_select_mode;
1116 DRV_LOG(ERR, "Failed to query lag affinity.");
1119 if (sh->lag.affinity_mode == MLX5_LAG_MODE_TIS) {
1120 for (i = 0; i < sh->bond.n_port; i++) {
1121 tis_attr.lag_tx_port_affinity =
1122 MLX5_IFC_LAG_MAP_TIS_AFFINITY(i,
1124 sh->tis[i] = mlx5_devx_cmd_create_tis(sh->cdev->ctx,
1127 DRV_LOG(ERR, "Failed to TIS %d/%d for bonding device"
1128 " %s.", i, sh->bond.n_port,
1133 DRV_LOG(DEBUG, "LAG number of ports : %d, affinity_1 & 2 : pf%d & %d.\n",
1134 sh->bond.n_port, lag_ctx.tx_remap_affinity_1,
1135 lag_ctx.tx_remap_affinity_2);
1138 if (sh->lag.affinity_mode == MLX5_LAG_MODE_HASH)
1139 DRV_LOG(INFO, "Device %s enabled HW hash based LAG.",
1142 tis_attr.lag_tx_port_affinity = 0;
1143 sh->tis[0] = mlx5_devx_cmd_create_tis(sh->cdev->ctx, &tis_attr);
1145 DRV_LOG(ERR, "Failed to TIS 0 for bonding device"
1146 " %s.", sh->ibdev_name);
1153 * Verify and store value for share device argument.
1156 * Key argument to verify.
1158 * Value associated with key.
1163 * 0 on success, a negative errno value otherwise and rte_errno is set.
1166 mlx5_dev_args_check_handler(const char *key, const char *val, void *opaque)
1168 struct mlx5_sh_config *config = opaque;
1172 tmp = strtol(val, NULL, 0);
1175 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
1178 if (tmp < 0 && strcmp(MLX5_TX_PP, key) && strcmp(MLX5_TX_SKEW, key)) {
1179 /* Negative values are acceptable for some keys only. */
1181 DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
1184 if (strcmp(MLX5_TX_PP, key) == 0) {
1185 unsigned long mod = tmp >= 0 ? tmp : -tmp;
1188 DRV_LOG(ERR, "Zero Tx packet pacing parameter.");
1192 config->tx_pp = tmp;
1193 } else if (strcmp(MLX5_TX_SKEW, key) == 0) {
1194 config->tx_skew = tmp;
1195 } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
1196 config->l3_vxlan_en = !!tmp;
1197 } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
1198 config->vf_nl_en = !!tmp;
1199 } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
1200 config->dv_esw_en = !!tmp;
1201 } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
1203 DRV_LOG(ERR, "Invalid %s parameter.", key);
1207 config->dv_flow_en = tmp;
1208 } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
1209 if (tmp != MLX5_XMETA_MODE_LEGACY &&
1210 tmp != MLX5_XMETA_MODE_META16 &&
1211 tmp != MLX5_XMETA_MODE_META32 &&
1212 tmp != MLX5_XMETA_MODE_MISS_INFO) {
1213 DRV_LOG(ERR, "Invalid extensive metadata parameter.");
1217 if (tmp != MLX5_XMETA_MODE_MISS_INFO)
1218 config->dv_xmeta_en = tmp;
1220 config->dv_miss_info = 1;
1221 } else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
1222 config->lacp_by_user = !!tmp;
1223 } else if (strcmp(MLX5_RECLAIM_MEM, key) == 0) {
1224 if (tmp != MLX5_RCM_NONE &&
1225 tmp != MLX5_RCM_LIGHT &&
1226 tmp != MLX5_RCM_AGGR) {
1227 DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
1231 config->reclaim_mode = tmp;
1232 } else if (strcmp(MLX5_DECAP_EN, key) == 0) {
1233 config->decap_en = !!tmp;
1234 } else if (strcmp(MLX5_ALLOW_DUPLICATE_PATTERN, key) == 0) {
1235 config->allow_duplicate_pattern = !!tmp;
1241 * Parse user device parameters and adjust them according to device
1245 * Pointer to shared device context.
1247 * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
1249 * Pointer to shared device configuration structure.
1252 * 0 on success, a negative errno value otherwise and rte_errno is set.
1255 mlx5_shared_dev_ctx_args_config(struct mlx5_dev_ctx_shared *sh,
1256 struct mlx5_kvargs_ctrl *mkvlist,
1257 struct mlx5_sh_config *config)
1259 const char **params = (const char *[]){
1270 MLX5_ALLOW_DUPLICATE_PATTERN,
1275 /* Default configuration. */
1276 memset(config, 0, sizeof(*config));
1277 config->vf_nl_en = 1;
1278 config->dv_esw_en = 1;
1279 config->dv_flow_en = 1;
1280 config->decap_en = 1;
1281 config->allow_duplicate_pattern = 1;
1282 if (mkvlist != NULL) {
1283 /* Process parameters. */
1284 ret = mlx5_kvargs_process(mkvlist, params,
1285 mlx5_dev_args_check_handler, config);
1287 DRV_LOG(ERR, "Failed to process device arguments: %s",
1288 strerror(rte_errno));
1292 /* Adjust parameters according to device capabilities. */
1293 if (config->dv_flow_en && !sh->dev_cap.dv_flow_en) {
1294 DRV_LOG(WARNING, "DV flow is not supported.");
1295 config->dv_flow_en = 0;
1297 if (config->dv_esw_en && !sh->dev_cap.dv_esw_en) {
1298 DRV_LOG(DEBUG, "E-Switch DV flow is not supported.");
1299 config->dv_esw_en = 0;
1301 if (config->dv_esw_en && !config->dv_flow_en) {
1303 "E-Switch DV flow is supported only when DV flow is enabled.");
1304 config->dv_esw_en = 0;
1306 if (config->dv_miss_info && config->dv_esw_en)
1307 config->dv_xmeta_en = MLX5_XMETA_MODE_META16;
1308 if (!config->dv_esw_en &&
1309 config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
1311 "Metadata mode %u is not supported (no E-Switch).",
1312 config->dv_xmeta_en);
1313 config->dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
1315 if (config->tx_pp && !sh->dev_cap.txpp_en) {
1316 DRV_LOG(ERR, "Packet pacing is not supported.");
1320 if (!config->tx_pp && config->tx_skew) {
1322 "\"tx_skew\" doesn't affect without \"tx_pp\".");
1325 * If HW has bug working with tunnel packet decapsulation and scatter
1326 * FCS, and decapsulation is needed, clear the hw_fcs_strip bit.
1327 * Then RTE_ETH_RX_OFFLOAD_KEEP_CRC bit will not be set anymore.
1329 if (sh->dev_cap.scatter_fcs_w_decap_disable && sh->config.decap_en)
1330 config->hw_fcs_strip = 0;
1332 config->hw_fcs_strip = sh->dev_cap.hw_fcs_strip;
1333 DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
1334 (config->hw_fcs_strip ? "" : "not "));
1335 DRV_LOG(DEBUG, "\"tx_pp\" is %d.", config->tx_pp);
1336 DRV_LOG(DEBUG, "\"tx_skew\" is %d.", config->tx_skew);
1337 DRV_LOG(DEBUG, "\"reclaim_mode\" is %u.", config->reclaim_mode);
1338 DRV_LOG(DEBUG, "\"dv_esw_en\" is %u.", config->dv_esw_en);
1339 DRV_LOG(DEBUG, "\"dv_flow_en\" is %u.", config->dv_flow_en);
1340 DRV_LOG(DEBUG, "\"dv_xmeta_en\" is %u.", config->dv_xmeta_en);
1341 DRV_LOG(DEBUG, "\"dv_miss_info\" is %u.", config->dv_miss_info);
1342 DRV_LOG(DEBUG, "\"l3_vxlan_en\" is %u.", config->l3_vxlan_en);
1343 DRV_LOG(DEBUG, "\"vf_nl_en\" is %u.", config->vf_nl_en);
1344 DRV_LOG(DEBUG, "\"lacp_by_user\" is %u.", config->lacp_by_user);
1345 DRV_LOG(DEBUG, "\"decap_en\" is %u.", config->decap_en);
1346 DRV_LOG(DEBUG, "\"allow_duplicate_pattern\" is %u.",
1347 config->allow_duplicate_pattern);
1352 * Configure realtime timestamp format.
1355 * Pointer to mlx5_dev_ctx_shared object.
1357 * Pointer to DevX HCA capabilities structure.
1360 mlx5_rt_timestamp_config(struct mlx5_dev_ctx_shared *sh,
1361 struct mlx5_hca_attr *hca_attr)
1363 uint32_t dw_cnt = MLX5_ST_SZ_DW(register_mtutc);
1364 uint32_t reg[dw_cnt];
1367 if (hca_attr->access_register_user)
1368 ret = mlx5_devx_cmd_register_read(sh->cdev->ctx,
1369 MLX5_REGISTER_ID_MTUTC, 0,
1374 /* MTUTC register is read successfully. */
1375 ts_mode = MLX5_GET(register_mtutc, reg, time_stamp_mode);
1376 if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
1377 sh->dev_cap.rt_timestamp = 1;
1379 /* Kernel does not support register reading. */
1380 if (hca_attr->dev_freq_khz == (NS_PER_S / MS_PER_S))
1381 sh->dev_cap.rt_timestamp = 1;
1386 * Allocate shared device context. If there is multiport device the
1387 * master and representors will share this context, if there is single
1388 * port dedicated device, the context will be used by only given
1389 * port due to unification.
1391 * Routine first searches the context for the specified device name,
1392 * if found the shared context assumed and reference counter is incremented.
1393 * If no context found the new one is created and initialized with specified
1394 * device context and parameters.
1397 * Pointer to the device attributes (name, port, etc).
1399 * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
1402 * Pointer to mlx5_dev_ctx_shared object on success,
1403 * otherwise NULL and rte_errno is set.
1405 struct mlx5_dev_ctx_shared *
1406 mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
1407 struct mlx5_kvargs_ctrl *mkvlist)
1409 struct mlx5_dev_ctx_shared *sh;
1414 /* Secondary process should not create the shared context. */
1415 MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
1416 pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
1417 /* Search for IB context by device name. */
1418 LIST_FOREACH(sh, &mlx5_dev_ctx_list, next) {
1419 if (!strcmp(sh->ibdev_name, spawn->phys_dev_name)) {
1424 /* No device found, we have to create new shared context. */
1425 MLX5_ASSERT(spawn->max_port);
1426 sh = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
1427 sizeof(struct mlx5_dev_ctx_shared) +
1428 spawn->max_port * sizeof(struct mlx5_dev_shared_port),
1429 RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
1431 DRV_LOG(ERR, "Shared context allocation failure.");
1435 pthread_mutex_init(&sh->txpp.mutex, NULL);
1436 sh->numa_node = spawn->cdev->dev->numa_node;
1437 sh->cdev = spawn->cdev;
1438 sh->esw_mode = !!(spawn->info.master || spawn->info.representor);
1439 if (spawn->bond_info)
1440 sh->bond = *spawn->bond_info;
1441 err = mlx5_os_capabilities_prepare(sh);
1443 DRV_LOG(ERR, "Fail to configure device capabilities.");
1446 err = mlx5_shared_dev_ctx_args_config(sh, mkvlist, &sh->config);
1448 DRV_LOG(ERR, "Failed to process device configure: %s",
1449 strerror(rte_errno));
1453 sh->max_port = spawn->max_port;
1454 strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->cdev->ctx),
1455 sizeof(sh->ibdev_name) - 1);
1456 strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->cdev->ctx),
1457 sizeof(sh->ibdev_path) - 1);
1459 * Setting port_id to max unallowed value means there is no interrupt
1460 * subhandler installed for the given port index i.
1462 for (i = 0; i < sh->max_port; i++) {
1463 sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
1464 sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
1465 sh->port[i].nl_ih_port_id = RTE_MAX_ETHPORTS;
1467 if (sh->cdev->config.devx) {
1468 sh->td = mlx5_devx_cmd_create_td(sh->cdev->ctx);
1470 DRV_LOG(ERR, "TD allocation failure");
1474 if (mlx5_setup_tis(sh)) {
1475 DRV_LOG(ERR, "TIS allocation failure");
1479 err = mlx5_rxtx_uars_prepare(sh);
1484 /* Initialize UAR access locks for 32bit implementations. */
1485 rte_spinlock_init(&sh->uar_lock_cq);
1486 for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
1487 rte_spinlock_init(&sh->uar_lock[i]);
1490 mlx5_os_dev_shared_handler_install(sh);
1491 if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
1492 err = mlx5_flow_os_init_workspace_once();
1496 mlx5_flow_aging_init(sh);
1497 mlx5_flow_counters_mng_init(sh);
1498 mlx5_flow_ipool_create(sh);
1499 /* Add context to the global device list. */
1500 LIST_INSERT_HEAD(&mlx5_dev_ctx_list, sh, next);
1501 rte_spinlock_init(&sh->geneve_tlv_opt_sl);
1503 pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1507 pthread_mutex_destroy(&sh->txpp.mutex);
1508 pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1510 mlx5_rxtx_uars_release(sh);
1514 claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
1515 } while (++i < (uint32_t)sh->bond.n_port);
1517 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1524 * Free shared IB device context. Decrement counter and if zero free
1525 * all allocated resources and close handles.
1528 * Pointer to mlx5_dev_ctx_shared object to free
1531 mlx5_free_shared_dev_ctx(struct mlx5_dev_ctx_shared *sh)
1536 pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
1537 #ifdef RTE_LIBRTE_MLX5_DEBUG
1538 /* Check the object presence in the list. */
1539 struct mlx5_dev_ctx_shared *lctx;
1541 LIST_FOREACH(lctx, &mlx5_dev_ctx_list, next)
1546 DRV_LOG(ERR, "Freeing non-existing shared IB context");
1551 MLX5_ASSERT(sh->refcnt);
1552 /* Secondary process should not free the shared context. */
1553 MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
1556 /* Stop watching for mempool events and unregister all mempools. */
1557 if (!sh->cdev->config.mr_mempool_reg_en) {
1558 ret = rte_mempool_event_callback_unregister
1559 (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
1562 (mlx5_dev_ctx_shared_rx_mempool_unregister_cb, sh);
1564 /* Remove context from the global device list. */
1565 LIST_REMOVE(sh, next);
1566 /* Release resources on the last device removal. */
1567 if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
1568 mlx5_os_net_cleanup();
1569 mlx5_flow_os_release_workspace();
1571 pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1572 if (sh->flex_parsers_dv) {
1573 mlx5_list_destroy(sh->flex_parsers_dv);
1574 sh->flex_parsers_dv = NULL;
1577 * Ensure there is no async event handler installed.
1578 * Only primary process handles async device events.
1580 mlx5_flow_counters_mng_close(sh);
1582 mlx5_flow_aso_ct_mng_close(sh);
1583 if (sh->aso_age_mng) {
1584 mlx5_flow_aso_age_mng_close(sh);
1585 sh->aso_age_mng = NULL;
1588 mlx5_aso_flow_mtrs_mng_close(sh);
1589 mlx5_flow_ipool_destroy(sh);
1590 mlx5_os_dev_shared_handler_uninstall(sh);
1591 mlx5_rxtx_uars_release(sh);
1594 claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
1595 } while (++i < sh->bond.n_port);
1597 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1598 MLX5_ASSERT(sh->geneve_tlv_option_resource == NULL);
1599 pthread_mutex_destroy(&sh->txpp.mutex);
1603 pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1607 * Destroy table hash list.
1610 * Pointer to the private device data structure.
1613 mlx5_free_table_hash_list(struct mlx5_priv *priv)
1615 struct mlx5_dev_ctx_shared *sh = priv->sh;
1616 struct mlx5_hlist **tbls = (priv->sh->config.dv_flow_en == 2) ?
1617 &sh->groups : &sh->flow_tbls;
1620 mlx5_hlist_destroy(*tbls);
1624 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
1626 * Allocate HW steering group hash list.
1629 * Pointer to the private device data structure.
1632 mlx5_alloc_hw_group_hash_list(struct mlx5_priv *priv)
1635 struct mlx5_dev_ctx_shared *sh = priv->sh;
1636 char s[MLX5_NAME_SIZE];
1639 snprintf(s, sizeof(s), "%s_flow_groups", priv->sh->ibdev_name);
1640 sh->groups = mlx5_hlist_create
1641 (s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
1643 flow_hw_grp_create_cb,
1644 flow_hw_grp_match_cb,
1645 flow_hw_grp_remove_cb,
1646 flow_hw_grp_clone_cb,
1647 flow_hw_grp_clone_free_cb);
1649 DRV_LOG(ERR, "flow groups with hash creation failed.");
1658 * Initialize flow table hash list and create the root tables entry
1662 * Pointer to the private device data structure.
1665 * Zero on success, positive error code otherwise.
1668 mlx5_alloc_table_hash_list(struct mlx5_priv *priv __rte_unused)
1672 /* Tables are only used in DV and DR modes. */
1673 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
1674 struct mlx5_dev_ctx_shared *sh = priv->sh;
1675 char s[MLX5_NAME_SIZE];
1677 if (priv->sh->config.dv_flow_en == 2)
1678 return mlx5_alloc_hw_group_hash_list(priv);
1680 snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
1681 sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
1683 flow_dv_tbl_create_cb,
1684 flow_dv_tbl_match_cb,
1685 flow_dv_tbl_remove_cb,
1686 flow_dv_tbl_clone_cb,
1687 flow_dv_tbl_clone_free_cb);
1688 if (!sh->flow_tbls) {
1689 DRV_LOG(ERR, "flow tables with hash creation failed.");
1693 #ifndef HAVE_MLX5DV_DR
1694 struct rte_flow_error error;
1695 struct rte_eth_dev *dev = &rte_eth_devices[priv->dev_data->port_id];
1698 * In case we have not DR support, the zero tables should be created
1699 * because DV expect to see them even if they cannot be created by
1702 if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0,
1703 NULL, 0, 1, 0, &error) ||
1704 !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0,
1705 NULL, 0, 1, 0, &error) ||
1706 !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0,
1707 NULL, 0, 1, 0, &error)) {
1713 mlx5_free_table_hash_list(priv);
1714 #endif /* HAVE_MLX5DV_DR */
1720 * Retrieve integer value from environment variable.
1723 * Environment variable name.
1726 * Integer value, 0 if the variable is not set.
1729 mlx5_getenv_int(const char *name)
1731 const char *val = getenv(name);
1739 * DPDK callback to add udp tunnel port
1742 * A pointer to eth_dev
1743 * @param[in] udp_tunnel
1744 * A pointer to udp tunnel
1747 * 0 on valid udp ports and tunnels, -ENOTSUP otherwise.
1750 mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
1751 struct rte_eth_udp_tunnel *udp_tunnel)
1753 MLX5_ASSERT(udp_tunnel != NULL);
1754 if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN &&
1755 udp_tunnel->udp_port == 4789)
1757 if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN_GPE &&
1758 udp_tunnel->udp_port == 4790)
1764 * Initialize process private data structure.
1767 * Pointer to Ethernet device structure.
1770 * 0 on success, a negative errno value otherwise and rte_errno is set.
1773 mlx5_proc_priv_init(struct rte_eth_dev *dev)
1775 struct mlx5_priv *priv = dev->data->dev_private;
1776 struct mlx5_proc_priv *ppriv;
1779 mlx5_proc_priv_uninit(dev);
1781 * UAR register table follows the process private structure. BlueFlame
1782 * registers for Tx queues are stored in the table.
1784 ppriv_size = sizeof(struct mlx5_proc_priv) +
1785 priv->txqs_n * sizeof(struct mlx5_uar_data);
1786 ppriv = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, ppriv_size,
1787 RTE_CACHE_LINE_SIZE, dev->device->numa_node);
1792 ppriv->uar_table_sz = priv->txqs_n;
1793 dev->process_private = ppriv;
1794 if (rte_eal_process_type() == RTE_PROC_PRIMARY)
1795 priv->sh->pppriv = ppriv;
1800 * Un-initialize process private data structure.
1803 * Pointer to Ethernet device structure.
1806 mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
1808 if (!dev->process_private)
1810 mlx5_free(dev->process_private);
1811 dev->process_private = NULL;
1815 * DPDK callback to close the device.
1817 * Destroy all queues and objects, free memory.
1820 * Pointer to Ethernet device structure.
1823 mlx5_dev_close(struct rte_eth_dev *dev)
1825 struct mlx5_priv *priv = dev->data->dev_private;
1829 if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
1830 /* Check if process_private released. */
1831 if (!dev->process_private)
1833 mlx5_tx_uar_uninit_secondary(dev);
1834 mlx5_proc_priv_uninit(dev);
1835 rte_eth_dev_release_port(dev);
1840 DRV_LOG(DEBUG, "port %u closing device \"%s\"",
1842 ((priv->sh->cdev->ctx != NULL) ?
1843 mlx5_os_get_ctx_device_name(priv->sh->cdev->ctx) : ""));
1845 * If default mreg copy action is removed at the stop stage,
1846 * the search will return none and nothing will be done anymore.
1848 mlx5_flow_stop_default(dev);
1849 mlx5_traffic_disable(dev);
1851 * If all the flows are already flushed in the device stop stage,
1852 * then this will return directly without any action.
1854 mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_GEN, true);
1855 mlx5_action_handle_flush(dev);
1856 mlx5_flow_meter_flush(dev, NULL);
1857 /* Prevent crashes when queues are still in use. */
1858 dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
1859 dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
1861 /* Disable datapath on secondary process. */
1862 mlx5_mp_os_req_stop_rxtx(dev);
1863 /* Free the eCPRI flex parser resource. */
1864 mlx5_flex_parser_ecpri_release(dev);
1865 mlx5_flex_item_port_cleanup(dev);
1866 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
1867 flow_hw_resource_release(dev);
1869 if (priv->rxq_privs != NULL) {
1870 /* XXX race condition if mlx5_rx_burst() is still running. */
1871 rte_delay_us_sleep(1000);
1872 for (i = 0; (i != priv->rxqs_n); ++i)
1873 mlx5_rxq_release(dev, i);
1875 mlx5_free(priv->rxq_privs);
1876 priv->rxq_privs = NULL;
1878 if (priv->txqs != NULL) {
1879 /* XXX race condition if mlx5_tx_burst() is still running. */
1880 rte_delay_us_sleep(1000);
1881 for (i = 0; (i != priv->txqs_n); ++i)
1882 mlx5_txq_release(dev, i);
1886 mlx5_proc_priv_uninit(dev);
1887 if (priv->q_counters) {
1888 mlx5_devx_cmd_destroy(priv->q_counters);
1889 priv->q_counters = NULL;
1891 if (priv->drop_queue.hrxq)
1892 mlx5_drop_action_destroy(dev);
1893 if (priv->mreg_cp_tbl)
1894 mlx5_hlist_destroy(priv->mreg_cp_tbl);
1895 mlx5_mprq_free_mp(dev);
1896 mlx5_os_free_shared_dr(priv);
1897 if (priv->rss_conf.rss_key != NULL)
1898 mlx5_free(priv->rss_conf.rss_key);
1899 if (priv->reta_idx != NULL)
1900 mlx5_free(priv->reta_idx);
1901 if (priv->sh->dev_cap.vf)
1902 mlx5_os_mac_addr_flush(dev);
1903 if (priv->nl_socket_route >= 0)
1904 close(priv->nl_socket_route);
1905 if (priv->nl_socket_rdma >= 0)
1906 close(priv->nl_socket_rdma);
1907 if (priv->vmwa_context)
1908 mlx5_vlan_vmwa_exit(priv->vmwa_context);
1909 ret = mlx5_hrxq_verify(dev);
1911 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
1912 dev->data->port_id);
1913 ret = mlx5_ind_table_obj_verify(dev);
1915 DRV_LOG(WARNING, "port %u some indirection table still remain",
1916 dev->data->port_id);
1917 ret = mlx5_rxq_obj_verify(dev);
1919 DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
1920 dev->data->port_id);
1921 ret = mlx5_ext_rxq_verify(dev);
1923 DRV_LOG(WARNING, "Port %u some external RxQ still remain.",
1924 dev->data->port_id);
1925 ret = mlx5_rxq_verify(dev);
1927 DRV_LOG(WARNING, "port %u some Rx queues still remain",
1928 dev->data->port_id);
1929 ret = mlx5_txq_obj_verify(dev);
1931 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
1932 dev->data->port_id);
1933 ret = mlx5_txq_verify(dev);
1935 DRV_LOG(WARNING, "port %u some Tx queues still remain",
1936 dev->data->port_id);
1937 ret = mlx5_flow_verify(dev);
1939 DRV_LOG(WARNING, "port %u some flows still remain",
1940 dev->data->port_id);
1942 mlx5_list_destroy(priv->hrxqs);
1943 mlx5_free(priv->ext_rxqs);
1945 * Free the shared context in last turn, because the cleanup
1946 * routines above may use some shared fields, like
1947 * mlx5_os_mac_addr_flush() uses ibdev_path for retrieving
1948 * ifindex if Netlink fails.
1950 mlx5_free_shared_dev_ctx(priv->sh);
1951 if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
1955 MLX5_ETH_FOREACH_DEV(port_id, dev->device) {
1956 struct mlx5_priv *opriv =
1957 rte_eth_devices[port_id].data->dev_private;
1960 opriv->domain_id != priv->domain_id ||
1961 &rte_eth_devices[port_id] == dev)
1967 claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1969 memset(priv, 0, sizeof(*priv));
1970 priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
1972 * Reset mac_addrs to NULL such that it is not freed as part of
1973 * rte_eth_dev_release_port(). mac_addrs is part of dev_private so
1974 * it is freed when dev_private is freed.
1976 dev->data->mac_addrs = NULL;
1980 const struct eth_dev_ops mlx5_dev_ops = {
1981 .dev_configure = mlx5_dev_configure,
1982 .dev_start = mlx5_dev_start,
1983 .dev_stop = mlx5_dev_stop,
1984 .dev_set_link_down = mlx5_set_link_down,
1985 .dev_set_link_up = mlx5_set_link_up,
1986 .dev_close = mlx5_dev_close,
1987 .promiscuous_enable = mlx5_promiscuous_enable,
1988 .promiscuous_disable = mlx5_promiscuous_disable,
1989 .allmulticast_enable = mlx5_allmulticast_enable,
1990 .allmulticast_disable = mlx5_allmulticast_disable,
1991 .link_update = mlx5_link_update,
1992 .stats_get = mlx5_stats_get,
1993 .stats_reset = mlx5_stats_reset,
1994 .xstats_get = mlx5_xstats_get,
1995 .xstats_reset = mlx5_xstats_reset,
1996 .xstats_get_names = mlx5_xstats_get_names,
1997 .fw_version_get = mlx5_fw_version_get,
1998 .dev_infos_get = mlx5_dev_infos_get,
1999 .representor_info_get = mlx5_representor_info_get,
2000 .read_clock = mlx5_txpp_read_clock,
2001 .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
2002 .vlan_filter_set = mlx5_vlan_filter_set,
2003 .rx_queue_setup = mlx5_rx_queue_setup,
2004 .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
2005 .tx_queue_setup = mlx5_tx_queue_setup,
2006 .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
2007 .rx_queue_release = mlx5_rx_queue_release,
2008 .tx_queue_release = mlx5_tx_queue_release,
2009 .rx_queue_start = mlx5_rx_queue_start,
2010 .rx_queue_stop = mlx5_rx_queue_stop,
2011 .tx_queue_start = mlx5_tx_queue_start,
2012 .tx_queue_stop = mlx5_tx_queue_stop,
2013 .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
2014 .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
2015 .mac_addr_remove = mlx5_mac_addr_remove,
2016 .mac_addr_add = mlx5_mac_addr_add,
2017 .mac_addr_set = mlx5_mac_addr_set,
2018 .set_mc_addr_list = mlx5_set_mc_addr_list,
2019 .mtu_set = mlx5_dev_set_mtu,
2020 .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
2021 .vlan_offload_set = mlx5_vlan_offload_set,
2022 .reta_update = mlx5_dev_rss_reta_update,
2023 .reta_query = mlx5_dev_rss_reta_query,
2024 .rss_hash_update = mlx5_rss_hash_update,
2025 .rss_hash_conf_get = mlx5_rss_hash_conf_get,
2026 .flow_ops_get = mlx5_flow_ops_get,
2027 .rxq_info_get = mlx5_rxq_info_get,
2028 .txq_info_get = mlx5_txq_info_get,
2029 .rx_burst_mode_get = mlx5_rx_burst_mode_get,
2030 .tx_burst_mode_get = mlx5_tx_burst_mode_get,
2031 .rx_queue_intr_enable = mlx5_rx_intr_enable,
2032 .rx_queue_intr_disable = mlx5_rx_intr_disable,
2033 .is_removed = mlx5_is_removed,
2034 .udp_tunnel_port_add = mlx5_udp_tunnel_port_add,
2035 .get_module_info = mlx5_get_module_info,
2036 .get_module_eeprom = mlx5_get_module_eeprom,
2037 .hairpin_cap_get = mlx5_hairpin_cap_get,
2038 .mtr_ops_get = mlx5_flow_meter_ops_get,
2039 .hairpin_bind = mlx5_hairpin_bind,
2040 .hairpin_unbind = mlx5_hairpin_unbind,
2041 .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
2042 .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
2043 .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
2044 .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
2045 .get_monitor_addr = mlx5_get_monitor_addr,
2048 /* Available operations from secondary process. */
2049 const struct eth_dev_ops mlx5_dev_sec_ops = {
2050 .stats_get = mlx5_stats_get,
2051 .stats_reset = mlx5_stats_reset,
2052 .xstats_get = mlx5_xstats_get,
2053 .xstats_reset = mlx5_xstats_reset,
2054 .xstats_get_names = mlx5_xstats_get_names,
2055 .fw_version_get = mlx5_fw_version_get,
2056 .dev_infos_get = mlx5_dev_infos_get,
2057 .representor_info_get = mlx5_representor_info_get,
2058 .read_clock = mlx5_txpp_read_clock,
2059 .rx_queue_start = mlx5_rx_queue_start,
2060 .rx_queue_stop = mlx5_rx_queue_stop,
2061 .tx_queue_start = mlx5_tx_queue_start,
2062 .tx_queue_stop = mlx5_tx_queue_stop,
2063 .rxq_info_get = mlx5_rxq_info_get,
2064 .txq_info_get = mlx5_txq_info_get,
2065 .rx_burst_mode_get = mlx5_rx_burst_mode_get,
2066 .tx_burst_mode_get = mlx5_tx_burst_mode_get,
2067 .get_module_info = mlx5_get_module_info,
2068 .get_module_eeprom = mlx5_get_module_eeprom,
2071 /* Available operations in flow isolated mode. */
2072 const struct eth_dev_ops mlx5_dev_ops_isolate = {
2073 .dev_configure = mlx5_dev_configure,
2074 .dev_start = mlx5_dev_start,
2075 .dev_stop = mlx5_dev_stop,
2076 .dev_set_link_down = mlx5_set_link_down,
2077 .dev_set_link_up = mlx5_set_link_up,
2078 .dev_close = mlx5_dev_close,
2079 .promiscuous_enable = mlx5_promiscuous_enable,
2080 .promiscuous_disable = mlx5_promiscuous_disable,
2081 .allmulticast_enable = mlx5_allmulticast_enable,
2082 .allmulticast_disable = mlx5_allmulticast_disable,
2083 .link_update = mlx5_link_update,
2084 .stats_get = mlx5_stats_get,
2085 .stats_reset = mlx5_stats_reset,
2086 .xstats_get = mlx5_xstats_get,
2087 .xstats_reset = mlx5_xstats_reset,
2088 .xstats_get_names = mlx5_xstats_get_names,
2089 .fw_version_get = mlx5_fw_version_get,
2090 .dev_infos_get = mlx5_dev_infos_get,
2091 .representor_info_get = mlx5_representor_info_get,
2092 .read_clock = mlx5_txpp_read_clock,
2093 .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
2094 .vlan_filter_set = mlx5_vlan_filter_set,
2095 .rx_queue_setup = mlx5_rx_queue_setup,
2096 .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
2097 .tx_queue_setup = mlx5_tx_queue_setup,
2098 .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
2099 .rx_queue_release = mlx5_rx_queue_release,
2100 .tx_queue_release = mlx5_tx_queue_release,
2101 .rx_queue_start = mlx5_rx_queue_start,
2102 .rx_queue_stop = mlx5_rx_queue_stop,
2103 .tx_queue_start = mlx5_tx_queue_start,
2104 .tx_queue_stop = mlx5_tx_queue_stop,
2105 .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
2106 .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
2107 .mac_addr_remove = mlx5_mac_addr_remove,
2108 .mac_addr_add = mlx5_mac_addr_add,
2109 .mac_addr_set = mlx5_mac_addr_set,
2110 .set_mc_addr_list = mlx5_set_mc_addr_list,
2111 .mtu_set = mlx5_dev_set_mtu,
2112 .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
2113 .vlan_offload_set = mlx5_vlan_offload_set,
2114 .flow_ops_get = mlx5_flow_ops_get,
2115 .rxq_info_get = mlx5_rxq_info_get,
2116 .txq_info_get = mlx5_txq_info_get,
2117 .rx_burst_mode_get = mlx5_rx_burst_mode_get,
2118 .tx_burst_mode_get = mlx5_tx_burst_mode_get,
2119 .rx_queue_intr_enable = mlx5_rx_intr_enable,
2120 .rx_queue_intr_disable = mlx5_rx_intr_disable,
2121 .is_removed = mlx5_is_removed,
2122 .get_module_info = mlx5_get_module_info,
2123 .get_module_eeprom = mlx5_get_module_eeprom,
2124 .hairpin_cap_get = mlx5_hairpin_cap_get,
2125 .mtr_ops_get = mlx5_flow_meter_ops_get,
2126 .hairpin_bind = mlx5_hairpin_bind,
2127 .hairpin_unbind = mlx5_hairpin_unbind,
2128 .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
2129 .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
2130 .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
2131 .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
2132 .get_monitor_addr = mlx5_get_monitor_addr,
2136 * Verify and store value for device argument.
2139 * Key argument to verify.
2141 * Value associated with key.
2146 * 0 on success, a negative errno value otherwise and rte_errno is set.
2149 mlx5_port_args_check_handler(const char *key, const char *val, void *opaque)
2151 struct mlx5_port_config *config = opaque;
2154 /* No-op, port representors are processed in mlx5_dev_spawn(). */
2155 if (!strcmp(MLX5_REPRESENTOR, key))
2158 tmp = strtol(val, NULL, 0);
2161 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
2165 /* Negative values are acceptable for some keys only. */
2167 DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
2170 if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
2171 if (tmp > MLX5_CQE_RESP_FORMAT_L34H_STRIDX) {
2172 DRV_LOG(ERR, "invalid CQE compression "
2173 "format parameter");
2177 config->cqe_comp = !!tmp;
2178 config->cqe_comp_fmt = tmp;
2179 } else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
2180 config->hw_padding = !!tmp;
2181 } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
2182 config->mprq.enabled = !!tmp;
2183 } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
2184 config->mprq.log_stride_num = tmp;
2185 } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
2186 config->mprq.log_stride_size = tmp;
2187 } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
2188 config->mprq.max_memcpy_len = tmp;
2189 } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
2190 config->mprq.min_rxqs_num = tmp;
2191 } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
2192 DRV_LOG(WARNING, "%s: deprecated parameter,"
2193 " converted to txq_inline_max", key);
2194 config->txq_inline_max = tmp;
2195 } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
2196 config->txq_inline_max = tmp;
2197 } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
2198 config->txq_inline_min = tmp;
2199 } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
2200 config->txq_inline_mpw = tmp;
2201 } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
2202 config->txqs_inline = tmp;
2203 } else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
2204 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
2205 } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
2206 config->mps = !!tmp;
2207 } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
2208 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
2209 } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
2210 DRV_LOG(WARNING, "%s: deprecated parameter,"
2211 " converted to txq_inline_mpw", key);
2212 config->txq_inline_mpw = tmp;
2213 } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
2214 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
2215 } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
2216 config->rx_vec_en = !!tmp;
2217 } else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
2218 config->max_dump_files_num = tmp;
2219 } else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
2220 config->lro_timeout = tmp;
2221 } else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) {
2222 config->log_hp_size = tmp;
2223 } else if (strcmp(MLX5_DELAY_DROP, key) == 0) {
2224 config->std_delay_drop = !!(tmp & MLX5_DELAY_DROP_STANDARD);
2225 config->hp_delay_drop = !!(tmp & MLX5_DELAY_DROP_HAIRPIN);
2231 * Parse user port parameters and adjust them according to device capabilities.
2234 * Pointer to shared device context.
2236 * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
2238 * Pointer to port configuration structure.
2241 * 0 on success, a negative errno value otherwise and rte_errno is set.
2244 mlx5_port_args_config(struct mlx5_priv *priv, struct mlx5_kvargs_ctrl *mkvlist,
2245 struct mlx5_port_config *config)
2247 struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
2248 struct mlx5_dev_cap *dev_cap = &priv->sh->dev_cap;
2249 bool devx = priv->sh->cdev->config.devx;
2250 const char **params = (const char *[]){
2251 MLX5_RXQ_CQE_COMP_EN,
2252 MLX5_RXQ_PKT_PAD_EN,
2254 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
2255 MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
2256 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
2259 MLX5_TXQ_INLINE_MIN,
2260 MLX5_TXQ_INLINE_MAX,
2261 MLX5_TXQ_INLINE_MPW,
2262 MLX5_TXQS_MIN_INLINE,
2265 MLX5_TXQ_MPW_HDR_DSEG_EN,
2266 MLX5_TXQ_MAX_INLINE_LEN,
2270 MLX5_MAX_DUMP_FILES_NUM,
2271 MLX5_LRO_TIMEOUT_USEC,
2278 /* Default configuration. */
2279 memset(config, 0, sizeof(*config));
2280 config->mps = MLX5_ARG_UNSET;
2281 config->cqe_comp = 1;
2282 config->rx_vec_en = 1;
2283 config->txq_inline_max = MLX5_ARG_UNSET;
2284 config->txq_inline_min = MLX5_ARG_UNSET;
2285 config->txq_inline_mpw = MLX5_ARG_UNSET;
2286 config->txqs_inline = MLX5_ARG_UNSET;
2287 config->mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
2288 config->mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
2289 config->mprq.log_stride_num = MLX5_MPRQ_DEFAULT_LOG_STRIDE_NUM;
2290 config->log_hp_size = MLX5_ARG_UNSET;
2291 config->std_delay_drop = 0;
2292 config->hp_delay_drop = 0;
2293 if (mkvlist != NULL) {
2294 /* Process parameters. */
2295 ret = mlx5_kvargs_process(mkvlist, params,
2296 mlx5_port_args_check_handler, config);
2298 DRV_LOG(ERR, "Failed to process port arguments: %s",
2299 strerror(rte_errno));
2303 /* Adjust parameters according to device capabilities. */
2304 if (config->hw_padding && !dev_cap->hw_padding) {
2305 DRV_LOG(DEBUG, "Rx end alignment padding isn't supported.");
2306 config->hw_padding = 0;
2307 } else if (config->hw_padding) {
2308 DRV_LOG(DEBUG, "Rx end alignment padding is enabled.");
2311 * MPW is disabled by default, while the Enhanced MPW is enabled
2314 if (config->mps == MLX5_ARG_UNSET)
2315 config->mps = (dev_cap->mps == MLX5_MPW_ENHANCED) ?
2316 MLX5_MPW_ENHANCED : MLX5_MPW_DISABLED;
2318 config->mps = config->mps ? dev_cap->mps : MLX5_MPW_DISABLED;
2319 DRV_LOG(INFO, "%sMPS is %s",
2320 config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
2321 config->mps == MLX5_MPW ? "legacy " : "",
2322 config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
2323 /* LRO is supported only when DV flow enabled. */
2324 if (dev_cap->lro_supported && !priv->sh->config.dv_flow_en)
2325 dev_cap->lro_supported = 0;
2326 if (dev_cap->lro_supported) {
2328 * If LRO timeout is not configured by application,
2329 * use the minimal supported value.
2331 if (!config->lro_timeout)
2332 config->lro_timeout =
2333 hca_attr->lro_timer_supported_periods[0];
2334 DRV_LOG(DEBUG, "LRO session timeout set to %d usec.",
2335 config->lro_timeout);
2337 if (config->cqe_comp && !dev_cap->cqe_comp) {
2338 DRV_LOG(WARNING, "Rx CQE 128B compression is not supported.");
2339 config->cqe_comp = 0;
2341 if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
2342 (!devx || !hca_attr->mini_cqe_resp_flow_tag)) {
2344 "Flow Tag CQE compression format isn't supported.");
2345 config->cqe_comp = 0;
2347 if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
2348 (!devx || !hca_attr->mini_cqe_resp_l3_l4_tag)) {
2350 "L3/L4 Header CQE compression format isn't supported.");
2351 config->cqe_comp = 0;
2353 DRV_LOG(DEBUG, "Rx CQE compression is %ssupported.",
2354 config->cqe_comp ? "" : "not ");
2355 if ((config->std_delay_drop || config->hp_delay_drop) &&
2356 !dev_cap->rq_delay_drop_en) {
2357 config->std_delay_drop = 0;
2358 config->hp_delay_drop = 0;
2359 DRV_LOG(WARNING, "dev_port-%u: Rxq delay drop isn't supported.",
2362 if (config->mprq.enabled && !priv->sh->dev_cap.mprq.enabled) {
2363 DRV_LOG(WARNING, "Multi-Packet RQ isn't supported.");
2364 config->mprq.enabled = 0;
2366 if (config->max_dump_files_num == 0)
2367 config->max_dump_files_num = 128;
2368 /* Detect minimal data bytes to inline. */
2369 mlx5_set_min_inline(priv);
2370 DRV_LOG(DEBUG, "VLAN insertion in WQE is %ssupported.",
2371 config->hw_vlan_insert ? "" : "not ");
2372 DRV_LOG(DEBUG, "\"rxq_pkt_pad_en\" is %u.", config->hw_padding);
2373 DRV_LOG(DEBUG, "\"rxq_cqe_comp_en\" is %u.", config->cqe_comp);
2374 DRV_LOG(DEBUG, "\"cqe_comp_fmt\" is %u.", config->cqe_comp_fmt);
2375 DRV_LOG(DEBUG, "\"rx_vec_en\" is %u.", config->rx_vec_en);
2376 DRV_LOG(DEBUG, "Standard \"delay_drop\" is %u.",
2377 config->std_delay_drop);
2378 DRV_LOG(DEBUG, "Hairpin \"delay_drop\" is %u.", config->hp_delay_drop);
2379 DRV_LOG(DEBUG, "\"max_dump_files_num\" is %u.",
2380 config->max_dump_files_num);
2381 DRV_LOG(DEBUG, "\"log_hp_size\" is %u.", config->log_hp_size);
2382 DRV_LOG(DEBUG, "\"mprq_en\" is %u.", config->mprq.enabled);
2383 DRV_LOG(DEBUG, "\"mprq_log_stride_num\" is %u.",
2384 config->mprq.log_stride_num);
2385 DRV_LOG(DEBUG, "\"mprq_log_stride_size\" is %u.",
2386 config->mprq.log_stride_size);
2387 DRV_LOG(DEBUG, "\"mprq_max_memcpy_len\" is %u.",
2388 config->mprq.max_memcpy_len);
2389 DRV_LOG(DEBUG, "\"rxqs_min_mprq\" is %u.", config->mprq.min_rxqs_num);
2390 DRV_LOG(DEBUG, "\"lro_timeout_usec\" is %u.", config->lro_timeout);
2391 DRV_LOG(DEBUG, "\"txq_mpw_en\" is %d.", config->mps);
2392 DRV_LOG(DEBUG, "\"txqs_min_inline\" is %d.", config->txqs_inline);
2393 DRV_LOG(DEBUG, "\"txq_inline_min\" is %d.", config->txq_inline_min);
2394 DRV_LOG(DEBUG, "\"txq_inline_max\" is %d.", config->txq_inline_max);
2395 DRV_LOG(DEBUG, "\"txq_inline_mpw\" is %d.", config->txq_inline_mpw);
2400 * Print the key for device argument.
2402 * It is "dummy" handler whose whole purpose is to enable using
2403 * mlx5_kvargs_process() function which set devargs as used.
2408 * Value associated with key, unused.
2410 * Unused, can be NULL.
2413 * 0 on success, function cannot fail.
2416 mlx5_dummy_handler(const char *key, const char *val, void *opaque)
2418 DRV_LOG(DEBUG, "\tKey: \"%s\" is set as used.", key);
2419 RTE_SET_USED(opaque);
2425 * Set requested devargs as used when device is already spawned.
2427 * It is necessary since it is valid to ask probe again for existing device,
2428 * if its devargs don't assign as used, mlx5_kvargs_validate() will fail.
2431 * Name of the existing device.
2433 * Port identifier of the device.
2435 * Pointer to mlx5 kvargs control to sign as used.
2438 mlx5_port_args_set_used(const char *name, uint16_t port_id,
2439 struct mlx5_kvargs_ctrl *mkvlist)
2441 const char **params = (const char *[]){
2442 MLX5_RXQ_CQE_COMP_EN,
2443 MLX5_RXQ_PKT_PAD_EN,
2445 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
2446 MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
2447 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
2450 MLX5_TXQ_INLINE_MIN,
2451 MLX5_TXQ_INLINE_MAX,
2452 MLX5_TXQ_INLINE_MPW,
2453 MLX5_TXQS_MIN_INLINE,
2456 MLX5_TXQ_MPW_HDR_DSEG_EN,
2457 MLX5_TXQ_MAX_INLINE_LEN,
2461 MLX5_MAX_DUMP_FILES_NUM,
2462 MLX5_LRO_TIMEOUT_USEC,
2468 /* Secondary process should not handle devargs. */
2469 if (rte_eal_process_type() != RTE_PROC_PRIMARY)
2471 MLX5_ASSERT(mkvlist != NULL);
2472 DRV_LOG(DEBUG, "Ethernet device \"%s\" for port %u "
2473 "already exists, set devargs as used:", name, port_id);
2474 /* This function cannot fail with this handler. */
2475 mlx5_kvargs_process(mkvlist, params, mlx5_dummy_handler, NULL);
2479 * Check sibling device configurations when probing again.
2481 * Sibling devices sharing infiniband device context should have compatible
2482 * configurations. This regards representors and bonding device.
2485 * Pointer to mlx5 device structure.
2487 * Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
2490 * 0 on success, a negative errno value otherwise and rte_errno is set.
2493 mlx5_probe_again_args_validate(struct mlx5_common_device *cdev,
2494 struct mlx5_kvargs_ctrl *mkvlist)
2496 struct mlx5_dev_ctx_shared *sh = NULL;
2497 struct mlx5_sh_config *config;
2500 /* Secondary process should not handle devargs. */
2501 if (rte_eal_process_type() != RTE_PROC_PRIMARY)
2503 pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
2504 /* Search for IB context by common device pointer. */
2505 LIST_FOREACH(sh, &mlx5_dev_ctx_list, next)
2506 if (sh->cdev == cdev)
2508 pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
2509 /* There is sh for this device -> it isn't probe again. */
2512 config = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
2513 sizeof(struct mlx5_sh_config),
2514 RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
2515 if (config == NULL) {
2516 rte_errno = -ENOMEM;
2520 * Creates a temporary IB context configure structure according to new
2521 * devargs attached in probing again.
2523 ret = mlx5_shared_dev_ctx_args_config(sh, mkvlist, config);
2525 DRV_LOG(ERR, "Failed to process device configure: %s",
2526 strerror(rte_errno));
2531 * Checks the match between the temporary structure and the existing
2532 * IB context structure.
2534 if (sh->config.dv_flow_en ^ config->dv_flow_en) {
2535 DRV_LOG(ERR, "\"dv_flow_en\" "
2536 "configuration mismatch for shared %s context.",
2540 if ((sh->config.dv_xmeta_en ^ config->dv_xmeta_en) ||
2541 (sh->config.dv_miss_info ^ config->dv_miss_info)) {
2542 DRV_LOG(ERR, "\"dv_xmeta_en\" "
2543 "configuration mismatch for shared %s context.",
2547 if (sh->config.dv_esw_en ^ config->dv_esw_en) {
2548 DRV_LOG(ERR, "\"dv_esw_en\" "
2549 "configuration mismatch for shared %s context.",
2553 if (sh->config.reclaim_mode ^ config->reclaim_mode) {
2554 DRV_LOG(ERR, "\"reclaim_mode\" "
2555 "configuration mismatch for shared %s context.",
2559 if (sh->config.allow_duplicate_pattern ^
2560 config->allow_duplicate_pattern) {
2561 DRV_LOG(ERR, "\"allow_duplicate_pattern\" "
2562 "configuration mismatch for shared %s context.",
2566 if (sh->config.l3_vxlan_en ^ config->l3_vxlan_en) {
2567 DRV_LOG(ERR, "\"l3_vxlan_en\" "
2568 "configuration mismatch for shared %s context.",
2572 if (sh->config.decap_en ^ config->decap_en) {
2573 DRV_LOG(ERR, "\"decap_en\" "
2574 "configuration mismatch for shared %s context.",
2578 if (sh->config.lacp_by_user ^ config->lacp_by_user) {
2579 DRV_LOG(ERR, "\"lacp_by_user\" "
2580 "configuration mismatch for shared %s context.",
2584 if (sh->config.tx_pp ^ config->tx_pp) {
2585 DRV_LOG(ERR, "\"tx_pp\" "
2586 "configuration mismatch for shared %s context.",
2590 if (sh->config.tx_skew ^ config->tx_skew) {
2591 DRV_LOG(ERR, "\"tx_skew\" "
2592 "configuration mismatch for shared %s context.",
2605 * Configures the minimal amount of data to inline into WQE
2606 * while sending packets.
2608 * - the txq_inline_min has the maximal priority, if this
2609 * key is specified in devargs
2610 * - if DevX is enabled the inline mode is queried from the
2611 * device (HCA attributes and NIC vport context if needed).
2612 * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4 Lx
2613 * and none (0 bytes) for other NICs
2616 * Pointer to the private device data structure.
2619 mlx5_set_min_inline(struct mlx5_priv *priv)
2621 struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
2622 struct mlx5_port_config *config = &priv->config;
2624 if (config->txq_inline_min != MLX5_ARG_UNSET) {
2625 /* Application defines size of inlined data explicitly. */
2626 if (priv->pci_dev != NULL) {
2627 switch (priv->pci_dev->id.device_id) {
2628 case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
2629 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
2630 if (config->txq_inline_min <
2631 (int)MLX5_INLINE_HSIZE_L2) {
2633 "txq_inline_mix aligned to minimal ConnectX-4 required value %d",
2634 (int)MLX5_INLINE_HSIZE_L2);
2635 config->txq_inline_min =
2636 MLX5_INLINE_HSIZE_L2;
2643 if (hca_attr->eth_net_offloads) {
2644 /* We have DevX enabled, inline mode queried successfully. */
2645 switch (hca_attr->wqe_inline_mode) {
2646 case MLX5_CAP_INLINE_MODE_L2:
2647 /* outer L2 header must be inlined. */
2648 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
2650 case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
2651 /* No inline data are required by NIC. */
2652 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2653 config->hw_vlan_insert =
2654 hca_attr->wqe_vlan_insert;
2655 DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
2657 case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
2658 /* inline mode is defined by NIC vport context. */
2659 if (!hca_attr->eth_virt)
2661 switch (hca_attr->vport_inline_mode) {
2662 case MLX5_INLINE_MODE_NONE:
2663 config->txq_inline_min =
2664 MLX5_INLINE_HSIZE_NONE;
2666 case MLX5_INLINE_MODE_L2:
2667 config->txq_inline_min =
2668 MLX5_INLINE_HSIZE_L2;
2670 case MLX5_INLINE_MODE_IP:
2671 config->txq_inline_min =
2672 MLX5_INLINE_HSIZE_L3;
2674 case MLX5_INLINE_MODE_TCP_UDP:
2675 config->txq_inline_min =
2676 MLX5_INLINE_HSIZE_L4;
2678 case MLX5_INLINE_MODE_INNER_L2:
2679 config->txq_inline_min =
2680 MLX5_INLINE_HSIZE_INNER_L2;
2682 case MLX5_INLINE_MODE_INNER_IP:
2683 config->txq_inline_min =
2684 MLX5_INLINE_HSIZE_INNER_L3;
2686 case MLX5_INLINE_MODE_INNER_TCP_UDP:
2687 config->txq_inline_min =
2688 MLX5_INLINE_HSIZE_INNER_L4;
2693 if (priv->pci_dev == NULL) {
2694 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2698 * We get here if we are unable to deduce
2699 * inline data size with DevX. Try PCI ID
2700 * to determine old NICs.
2702 switch (priv->pci_dev->id.device_id) {
2703 case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
2704 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
2705 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
2706 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
2707 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
2708 config->hw_vlan_insert = 0;
2710 case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
2711 case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
2712 case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
2713 case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
2715 * These NICs support VLAN insertion from WQE and
2716 * report the wqe_vlan_insert flag. But there is the bug
2717 * and PFC control may be broken, so disable feature.
2719 config->hw_vlan_insert = 0;
2720 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2723 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2727 DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
2731 * Configures the metadata mask fields in the shared context.
2734 * Pointer to Ethernet device.
2737 mlx5_set_metadata_mask(struct rte_eth_dev *dev)
2739 struct mlx5_priv *priv = dev->data->dev_private;
2740 struct mlx5_dev_ctx_shared *sh = priv->sh;
2741 uint32_t meta, mark, reg_c0;
2743 reg_c0 = ~priv->vport_meta_mask;
2744 switch (sh->config.dv_xmeta_en) {
2745 case MLX5_XMETA_MODE_LEGACY:
2747 mark = MLX5_FLOW_MARK_MASK;
2749 case MLX5_XMETA_MODE_META16:
2750 meta = reg_c0 >> rte_bsf32(reg_c0);
2751 mark = MLX5_FLOW_MARK_MASK;
2753 case MLX5_XMETA_MODE_META32:
2755 mark = (reg_c0 >> rte_bsf32(reg_c0)) & MLX5_FLOW_MARK_MASK;
2763 if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
2764 DRV_LOG(WARNING, "metadata MARK mask mismatch %08X:%08X",
2765 sh->dv_mark_mask, mark);
2767 sh->dv_mark_mask = mark;
2768 if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
2769 DRV_LOG(WARNING, "metadata META mask mismatch %08X:%08X",
2770 sh->dv_meta_mask, meta);
2772 sh->dv_meta_mask = meta;
2773 if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
2774 DRV_LOG(WARNING, "metadata reg_c0 mask mismatch %08X:%08X",
2775 sh->dv_meta_mask, reg_c0);
2777 sh->dv_regc0_mask = reg_c0;
2778 DRV_LOG(DEBUG, "metadata mode %u", sh->config.dv_xmeta_en);
2779 DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
2780 DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
2781 DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);
2785 rte_pmd_mlx5_get_dyn_flag_names(char *names[], unsigned int n)
2787 static const char *const dynf_names[] = {
2788 RTE_PMD_MLX5_FINE_GRANULARITY_INLINE,
2789 RTE_MBUF_DYNFLAG_METADATA_NAME,
2790 RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME
2794 if (n < RTE_DIM(dynf_names))
2796 for (i = 0; i < RTE_DIM(dynf_names); i++) {
2797 if (names[i] == NULL)
2799 strcpy(names[i], dynf_names[i]);
2801 return RTE_DIM(dynf_names);
2805 * Look for the ethernet device belonging to mlx5 driver.
2807 * @param[in] port_id
2808 * port_id to start looking for device.
2810 * Pointer to the hint device. When device is being probed
2811 * the its siblings (master and preceding representors might
2812 * not have assigned driver yet (because the mlx5_os_pci_probe()
2813 * is not completed yet, for this case match on hint
2814 * device may be used to detect sibling device.
2817 * port_id of found device, RTE_MAX_ETHPORT if not found.
2820 mlx5_eth_find_next(uint16_t port_id, struct rte_device *odev)
2822 while (port_id < RTE_MAX_ETHPORTS) {
2823 struct rte_eth_dev *dev = &rte_eth_devices[port_id];
2825 if (dev->state != RTE_ETH_DEV_UNUSED &&
2827 (dev->device == odev ||
2828 (dev->device->driver &&
2829 dev->device->driver->name &&
2830 ((strcmp(dev->device->driver->name,
2831 MLX5_PCI_DRIVER_NAME) == 0) ||
2832 (strcmp(dev->device->driver->name,
2833 MLX5_AUXILIARY_DRIVER_NAME) == 0)))))
2837 if (port_id >= RTE_MAX_ETHPORTS)
2838 return RTE_MAX_ETHPORTS;
2843 * Callback to remove a device.
2845 * This function removes all Ethernet devices belong to a given device.
2848 * Pointer to the generic device.
2851 * 0 on success, the function cannot fail.
2854 mlx5_net_remove(struct mlx5_common_device *cdev)
2859 RTE_ETH_FOREACH_DEV_OF(port_id, cdev->dev) {
2861 * mlx5_dev_close() is not registered to secondary process,
2862 * call the close function explicitly for secondary process.
2864 if (rte_eal_process_type() == RTE_PROC_SECONDARY)
2865 ret |= mlx5_dev_close(&rte_eth_devices[port_id]);
2867 ret |= rte_eth_dev_close(port_id);
2869 return ret == 0 ? 0 : -EIO;
2872 static const struct rte_pci_id mlx5_pci_id_map[] = {
2874 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2875 PCI_DEVICE_ID_MELLANOX_CONNECTX4)
2878 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2879 PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
2882 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2883 PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
2886 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2887 PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
2890 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2891 PCI_DEVICE_ID_MELLANOX_CONNECTX5)
2894 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2895 PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
2898 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2899 PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
2902 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2903 PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
2906 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2907 PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
2910 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2911 PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
2914 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2915 PCI_DEVICE_ID_MELLANOX_CONNECTX6)
2918 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2919 PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
2922 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2923 PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
2926 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2927 PCI_DEVICE_ID_MELLANOX_CONNECTXVF)
2930 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2931 PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
2934 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2935 PCI_DEVICE_ID_MELLANOX_CONNECTX6LX)
2938 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2939 PCI_DEVICE_ID_MELLANOX_CONNECTX7)
2942 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2943 PCI_DEVICE_ID_MELLANOX_CONNECTX7BF)
2950 static struct mlx5_class_driver mlx5_net_driver = {
2951 .drv_class = MLX5_CLASS_ETH,
2952 .name = RTE_STR(MLX5_ETH_DRIVER_NAME),
2953 .id_table = mlx5_pci_id_map,
2954 .probe = mlx5_os_net_probe,
2955 .remove = mlx5_net_remove,
2961 /* Initialize driver log type. */
2962 RTE_LOG_REGISTER_DEFAULT(mlx5_logtype, NOTICE)
2965 * Driver initialization routine.
2967 RTE_INIT(rte_mlx5_pmd_init)
2969 pthread_mutex_init(&mlx5_dev_ctx_list_mutex, NULL);
2971 /* Build the static tables for Verbs conversion. */
2972 mlx5_set_ptype_table();
2973 mlx5_set_cksum_table();
2974 mlx5_set_swp_types_table();
2976 mlx5_class_driver_register(&mlx5_net_driver);
2979 RTE_PMD_EXPORT_NAME(MLX5_ETH_DRIVER_NAME, __COUNTER__);
2980 RTE_PMD_REGISTER_PCI_TABLE(MLX5_ETH_DRIVER_NAME, mlx5_pci_id_map);
2981 RTE_PMD_REGISTER_KMOD_DEP(MLX5_ETH_DRIVER_NAME, "* ib_uverbs & mlx5_core & mlx5_ib");