1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2015 6WIND S.A.
3 * Copyright 2015 Mellanox Technologies, Ltd
16 #include <linux/rtnetlink.h>
19 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
21 #pragma GCC diagnostic ignored "-Wpedantic"
23 #include <infiniband/verbs.h>
25 #pragma GCC diagnostic error "-Wpedantic"
28 #include <rte_malloc.h>
29 #include <rte_ethdev_driver.h>
30 #include <rte_ethdev_pci.h>
32 #include <rte_bus_pci.h>
33 #include <rte_common.h>
34 #include <rte_config.h>
35 #include <rte_eal_memconfig.h>
36 #include <rte_kvargs.h>
37 #include <rte_rwlock.h>
38 #include <rte_spinlock.h>
39 #include <rte_string_fns.h>
40 #include <rte_alarm.h>
43 #include "mlx5_utils.h"
44 #include "mlx5_rxtx.h"
45 #include "mlx5_autoconf.h"
46 #include "mlx5_defs.h"
47 #include "mlx5_glue.h"
49 #include "mlx5_flow.h"
51 /* Device parameter to enable RX completion queue compression. */
52 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
54 /* Device parameter to enable RX completion entry padding to 128B. */
55 #define MLX5_RXQ_CQE_PAD_EN "rxq_cqe_pad_en"
57 /* Device parameter to enable padding Rx packet to cacheline size. */
58 #define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
60 /* Device parameter to enable Multi-Packet Rx queue. */
61 #define MLX5_RX_MPRQ_EN "mprq_en"
63 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
64 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
66 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
67 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
69 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
70 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
72 /* Device parameter to configure inline send. Deprecated, ignored.*/
73 #define MLX5_TXQ_INLINE "txq_inline"
75 /* Device parameter to limit packet size to inline with ordinary SEND. */
76 #define MLX5_TXQ_INLINE_MAX "txq_inline_max"
78 /* Device parameter to configure minimal data size to inline. */
79 #define MLX5_TXQ_INLINE_MIN "txq_inline_min"
81 /* Device parameter to limit packet size to inline with Enhanced MPW. */
82 #define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
85 * Device parameter to configure the number of TX queues threshold for
86 * enabling inline send.
88 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
91 * Device parameter to configure the number of TX queues threshold for
92 * enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
94 #define MLX5_TXQS_MAX_VEC "txqs_max_vec"
96 /* Device parameter to enable multi-packet send WQEs. */
97 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
100 * Device parameter to include 2 dsegs in the title WQEBB.
101 * Deprecated, ignored.
103 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
106 * Device parameter to limit the size of inlining packet.
107 * Deprecated, ignored.
109 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
112 * Device parameter to enable hardware Tx vector.
113 * Deprecated, ignored (no vectorized Tx routines anymore).
115 #define MLX5_TX_VEC_EN "tx_vec_en"
117 /* Device parameter to enable hardware Rx vector. */
118 #define MLX5_RX_VEC_EN "rx_vec_en"
120 /* Allow L3 VXLAN flow creation. */
121 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
123 /* Activate DV E-Switch flow steering. */
124 #define MLX5_DV_ESW_EN "dv_esw_en"
126 /* Activate DV flow steering. */
127 #define MLX5_DV_FLOW_EN "dv_flow_en"
129 /* Activate Netlink support in VF mode. */
130 #define MLX5_VF_NL_EN "vf_nl_en"
132 /* Enable extending memsegs when creating a MR. */
133 #define MLX5_MR_EXT_MEMSEG_EN "mr_ext_memseg_en"
135 /* Select port representors to instantiate. */
136 #define MLX5_REPRESENTOR "representor"
138 /* Device parameter to configure the maximum number of dump files per queue. */
139 #define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
141 /* Configure timeout of LRO session (in microseconds). */
142 #define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
144 #ifndef HAVE_IBV_MLX5_MOD_MPW
145 #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
146 #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
149 #ifndef HAVE_IBV_MLX5_MOD_CQE_128B_COMP
150 #define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4)
153 static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
155 /* Shared memory between primary and secondary processes. */
156 struct mlx5_shared_data *mlx5_shared_data;
158 /* Spinlock for mlx5_shared_data allocation. */
159 static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
161 /* Process local data for secondary processes. */
162 static struct mlx5_local_data mlx5_local_data;
164 /** Driver-specific log messages type. */
167 /** Data associated with devices to spawn. */
168 struct mlx5_dev_spawn_data {
169 uint32_t ifindex; /**< Network interface index. */
170 uint32_t max_port; /**< IB device maximal port index. */
171 uint32_t ibv_port; /**< IB device physical port index. */
172 struct mlx5_switch_info info; /**< Switch information. */
173 struct ibv_device *ibv_dev; /**< Associated IB device. */
174 struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */
175 struct rte_pci_device *pci_dev; /**< Backend PCI device. */
178 static LIST_HEAD(, mlx5_ibv_shared) mlx5_ibv_list = LIST_HEAD_INITIALIZER();
179 static pthread_mutex_t mlx5_ibv_list_mutex = PTHREAD_MUTEX_INITIALIZER;
182 * Initialize the counters management structure.
185 * Pointer to mlx5_ibv_shared object to free
188 mlx5_flow_counters_mng_init(struct mlx5_ibv_shared *sh)
192 TAILQ_INIT(&sh->cmng.flow_counters);
193 for (i = 0; i < RTE_DIM(sh->cmng.ccont); ++i)
194 TAILQ_INIT(&sh->cmng.ccont[i].pool_list);
198 * Destroy all the resources allocated for a counter memory management.
201 * Pointer to the memory management structure.
204 mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
206 uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
208 LIST_REMOVE(mng, next);
209 claim_zero(mlx5_devx_cmd_destroy(mng->dm));
210 claim_zero(mlx5_glue->devx_umem_dereg(mng->umem));
215 * Close and release all the resources of the counters management.
218 * Pointer to mlx5_ibv_shared object to free.
221 mlx5_flow_counters_mng_close(struct mlx5_ibv_shared *sh)
223 struct mlx5_counter_stats_mem_mng *mng;
230 rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
231 if (rte_errno != EINPROGRESS)
235 for (i = 0; i < RTE_DIM(sh->cmng.ccont); ++i) {
236 struct mlx5_flow_counter_pool *pool;
237 uint32_t batch = !!(i % 2);
239 if (!sh->cmng.ccont[i].pools)
241 pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
246 (mlx5_devx_cmd_destroy(pool->min_dcs));
248 for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
249 if (pool->counters_raw[j].action)
251 (mlx5_glue->destroy_flow_action
252 (pool->counters_raw[j].action));
253 if (!batch && pool->counters_raw[j].dcs)
254 claim_zero(mlx5_devx_cmd_destroy
255 (pool->counters_raw[j].dcs));
257 TAILQ_REMOVE(&sh->cmng.ccont[i].pool_list, pool,
260 pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
262 rte_free(sh->cmng.ccont[i].pools);
264 mng = LIST_FIRST(&sh->cmng.mem_mngs);
266 mlx5_flow_destroy_counter_stat_mem_mng(mng);
267 mng = LIST_FIRST(&sh->cmng.mem_mngs);
269 memset(&sh->cmng, 0, sizeof(sh->cmng));
273 * Allocate shared IB device context. If there is multiport device the
274 * master and representors will share this context, if there is single
275 * port dedicated IB device, the context will be used by only given
276 * port due to unification.
278 * Routine first searches the context for the specified IB device name,
279 * if found the shared context assumed and reference counter is incremented.
280 * If no context found the new one is created and initialized with specified
281 * IB device context and parameters.
284 * Pointer to the IB device attributes (name, port, etc).
287 * Pointer to mlx5_ibv_shared object on success,
288 * otherwise NULL and rte_errno is set.
290 static struct mlx5_ibv_shared *
291 mlx5_alloc_shared_ibctx(const struct mlx5_dev_spawn_data *spawn)
293 struct mlx5_ibv_shared *sh;
298 /* Secondary process should not create the shared context. */
299 assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
300 pthread_mutex_lock(&mlx5_ibv_list_mutex);
301 /* Search for IB context by device name. */
302 LIST_FOREACH(sh, &mlx5_ibv_list, next) {
303 if (!strcmp(sh->ibdev_name, spawn->ibv_dev->name)) {
308 /* No device found, we have to create new shared context. */
309 assert(spawn->max_port);
310 sh = rte_zmalloc("ethdev shared ib context",
311 sizeof(struct mlx5_ibv_shared) +
313 sizeof(struct mlx5_ibv_shared_port),
314 RTE_CACHE_LINE_SIZE);
316 DRV_LOG(ERR, "shared context allocation failure");
320 /* Try to open IB device with DV first, then usual Verbs. */
322 sh->ctx = mlx5_glue->dv_open_device(spawn->ibv_dev);
325 DRV_LOG(DEBUG, "DevX is supported");
327 sh->ctx = mlx5_glue->open_device(spawn->ibv_dev);
329 err = errno ? errno : ENODEV;
332 DRV_LOG(DEBUG, "DevX is NOT supported");
334 err = mlx5_glue->query_device_ex(sh->ctx, NULL, &sh->device_attr);
336 DRV_LOG(DEBUG, "ibv_query_device_ex() failed");
340 sh->max_port = spawn->max_port;
341 strncpy(sh->ibdev_name, sh->ctx->device->name,
342 sizeof(sh->ibdev_name));
343 strncpy(sh->ibdev_path, sh->ctx->device->ibdev_path,
344 sizeof(sh->ibdev_path));
345 sh->pci_dev = spawn->pci_dev;
346 pthread_mutex_init(&sh->intr_mutex, NULL);
348 * Setting port_id to max unallowed value means
349 * there is no interrupt subhandler installed for
350 * the given port index i.
352 for (i = 0; i < sh->max_port; i++)
353 sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
354 sh->pd = mlx5_glue->alloc_pd(sh->ctx);
355 if (sh->pd == NULL) {
356 DRV_LOG(ERR, "PD allocation failure");
361 * Once the device is added to the list of memory event
362 * callback, its global MR cache table cannot be expanded
363 * on the fly because of deadlock. If it overflows, lookup
364 * should be done by searching MR list linearly, which is slow.
366 * At this point the device is not added to the memory
367 * event list yet, context is just being created.
369 err = mlx5_mr_btree_init(&sh->mr.cache,
370 MLX5_MR_BTREE_CACHE_N * 2,
371 sh->pci_dev->device.numa_node);
376 mlx5_flow_counters_mng_init(sh);
377 LIST_INSERT_HEAD(&mlx5_ibv_list, sh, next);
379 pthread_mutex_unlock(&mlx5_ibv_list_mutex);
382 pthread_mutex_unlock(&mlx5_ibv_list_mutex);
385 claim_zero(mlx5_glue->dealloc_pd(sh->pd));
387 claim_zero(mlx5_glue->close_device(sh->ctx));
395 * Free shared IB device context. Decrement counter and if zero free
396 * all allocated resources and close handles.
399 * Pointer to mlx5_ibv_shared object to free
402 mlx5_free_shared_ibctx(struct mlx5_ibv_shared *sh)
404 pthread_mutex_lock(&mlx5_ibv_list_mutex);
406 /* Check the object presence in the list. */
407 struct mlx5_ibv_shared *lctx;
409 LIST_FOREACH(lctx, &mlx5_ibv_list, next)
414 DRV_LOG(ERR, "Freeing non-existing shared IB context");
420 /* Secondary process should not free the shared context. */
421 assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
424 /* Release created Memory Regions. */
426 LIST_REMOVE(sh, next);
428 * Ensure there is no async event handler installed.
429 * Only primary process handles async device events.
431 mlx5_flow_counters_mng_close(sh);
432 assert(!sh->intr_cnt);
434 mlx5_intr_callback_unregister
435 (&sh->intr_handle, mlx5_dev_interrupt_handler, sh);
436 pthread_mutex_destroy(&sh->intr_mutex);
438 claim_zero(mlx5_glue->dealloc_pd(sh->pd));
440 claim_zero(mlx5_glue->close_device(sh->ctx));
443 pthread_mutex_unlock(&mlx5_ibv_list_mutex);
447 * Initialize DR related data within private structure.
448 * Routine checks the reference counter and does actual
449 * resources creation/initialization only if counter is zero.
452 * Pointer to the private device data structure.
455 * Zero on success, positive error code otherwise.
458 mlx5_alloc_shared_dr(struct mlx5_priv *priv)
460 #ifdef HAVE_MLX5DV_DR
461 struct mlx5_ibv_shared *sh = priv->sh;
467 /* Shared DV/DR structures is already initialized. */
472 /* Reference counter is zero, we should initialize structures. */
473 domain = mlx5_glue->dr_create_domain(sh->ctx,
474 MLX5DV_DR_DOMAIN_TYPE_NIC_RX);
476 DRV_LOG(ERR, "ingress mlx5dv_dr_create_domain failed");
480 sh->rx_domain = domain;
481 domain = mlx5_glue->dr_create_domain(sh->ctx,
482 MLX5DV_DR_DOMAIN_TYPE_NIC_TX);
484 DRV_LOG(ERR, "egress mlx5dv_dr_create_domain failed");
488 pthread_mutex_init(&sh->dv_mutex, NULL);
489 sh->tx_domain = domain;
490 #ifdef HAVE_MLX5DV_DR_ESWITCH
491 if (priv->config.dv_esw_en) {
492 domain = mlx5_glue->dr_create_domain
493 (sh->ctx, MLX5DV_DR_DOMAIN_TYPE_FDB);
495 DRV_LOG(ERR, "FDB mlx5dv_dr_create_domain failed");
499 sh->fdb_domain = domain;
500 sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop();
508 /* Rollback the created objects. */
510 mlx5_glue->dr_destroy_domain(sh->rx_domain);
511 sh->rx_domain = NULL;
514 mlx5_glue->dr_destroy_domain(sh->tx_domain);
515 sh->tx_domain = NULL;
517 if (sh->fdb_domain) {
518 mlx5_glue->dr_destroy_domain(sh->fdb_domain);
519 sh->fdb_domain = NULL;
521 if (sh->esw_drop_action) {
522 mlx5_glue->destroy_flow_action(sh->esw_drop_action);
523 sh->esw_drop_action = NULL;
533 * Destroy DR related data within private structure.
536 * Pointer to the private device data structure.
539 mlx5_free_shared_dr(struct mlx5_priv *priv)
541 #ifdef HAVE_MLX5DV_DR
542 struct mlx5_ibv_shared *sh;
544 if (!priv->dr_shared)
549 assert(sh->dv_refcnt);
550 if (sh->dv_refcnt && --sh->dv_refcnt)
553 mlx5_glue->dr_destroy_domain(sh->rx_domain);
554 sh->rx_domain = NULL;
557 mlx5_glue->dr_destroy_domain(sh->tx_domain);
558 sh->tx_domain = NULL;
560 #ifdef HAVE_MLX5DV_DR_ESWITCH
561 if (sh->fdb_domain) {
562 mlx5_glue->dr_destroy_domain(sh->fdb_domain);
563 sh->fdb_domain = NULL;
565 if (sh->esw_drop_action) {
566 mlx5_glue->destroy_flow_action(sh->esw_drop_action);
567 sh->esw_drop_action = NULL;
570 pthread_mutex_destroy(&sh->dv_mutex);
577 * Initialize shared data between primary and secondary process.
579 * A memzone is reserved by primary process and secondary processes attach to
583 * 0 on success, a negative errno value otherwise and rte_errno is set.
586 mlx5_init_shared_data(void)
588 const struct rte_memzone *mz;
591 rte_spinlock_lock(&mlx5_shared_data_lock);
592 if (mlx5_shared_data == NULL) {
593 if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
594 /* Allocate shared memory. */
595 mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
596 sizeof(*mlx5_shared_data),
600 "Cannot allocate mlx5 shared data\n");
604 mlx5_shared_data = mz->addr;
605 memset(mlx5_shared_data, 0, sizeof(*mlx5_shared_data));
606 rte_spinlock_init(&mlx5_shared_data->lock);
608 /* Lookup allocated shared memory. */
609 mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
612 "Cannot attach mlx5 shared data\n");
616 mlx5_shared_data = mz->addr;
617 memset(&mlx5_local_data, 0, sizeof(mlx5_local_data));
621 rte_spinlock_unlock(&mlx5_shared_data_lock);
626 * Retrieve integer value from environment variable.
629 * Environment variable name.
632 * Integer value, 0 if the variable is not set.
635 mlx5_getenv_int(const char *name)
637 const char *val = getenv(name);
645 * Verbs callback to allocate a memory. This function should allocate the space
646 * according to the size provided residing inside a huge page.
647 * Please note that all allocation must respect the alignment from libmlx5
648 * (i.e. currently sysconf(_SC_PAGESIZE)).
651 * The size in bytes of the memory to allocate.
653 * A pointer to the callback data.
656 * Allocated buffer, NULL otherwise and rte_errno is set.
659 mlx5_alloc_verbs_buf(size_t size, void *data)
661 struct mlx5_priv *priv = data;
663 size_t alignment = sysconf(_SC_PAGESIZE);
664 unsigned int socket = SOCKET_ID_ANY;
666 if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) {
667 const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
669 socket = ctrl->socket;
670 } else if (priv->verbs_alloc_ctx.type ==
671 MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) {
672 const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
674 socket = ctrl->socket;
676 assert(data != NULL);
677 ret = rte_malloc_socket(__func__, size, alignment, socket);
684 * Verbs callback to free a memory.
687 * A pointer to the memory to free.
689 * A pointer to the callback data.
692 mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
694 assert(data != NULL);
699 * Initialize process private data structure.
702 * Pointer to Ethernet device structure.
705 * 0 on success, a negative errno value otherwise and rte_errno is set.
708 mlx5_proc_priv_init(struct rte_eth_dev *dev)
710 struct mlx5_priv *priv = dev->data->dev_private;
711 struct mlx5_proc_priv *ppriv;
715 * UAR register table follows the process private structure. BlueFlame
716 * registers for Tx queues are stored in the table.
719 sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *);
720 ppriv = rte_malloc_socket("mlx5_proc_priv", ppriv_size,
721 RTE_CACHE_LINE_SIZE, dev->device->numa_node);
726 ppriv->uar_table_sz = ppriv_size;
727 dev->process_private = ppriv;
732 * Un-initialize process private data structure.
735 * Pointer to Ethernet device structure.
738 mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
740 if (!dev->process_private)
742 rte_free(dev->process_private);
743 dev->process_private = NULL;
747 * DPDK callback to close the device.
749 * Destroy all queues and objects, free memory.
752 * Pointer to Ethernet device structure.
755 mlx5_dev_close(struct rte_eth_dev *dev)
757 struct mlx5_priv *priv = dev->data->dev_private;
761 DRV_LOG(DEBUG, "port %u closing device \"%s\"",
763 ((priv->sh->ctx != NULL) ? priv->sh->ctx->device->name : ""));
764 /* In case mlx5_dev_stop() has not been called. */
765 mlx5_dev_interrupt_handler_uninstall(dev);
766 mlx5_traffic_disable(dev);
767 mlx5_flow_flush(dev, NULL);
768 /* Prevent crashes when queues are still in use. */
769 dev->rx_pkt_burst = removed_rx_burst;
770 dev->tx_pkt_burst = removed_tx_burst;
772 /* Disable datapath on secondary process. */
773 mlx5_mp_req_stop_rxtx(dev);
774 if (priv->rxqs != NULL) {
775 /* XXX race condition if mlx5_rx_burst() is still running. */
777 for (i = 0; (i != priv->rxqs_n); ++i)
778 mlx5_rxq_release(dev, i);
782 if (priv->txqs != NULL) {
783 /* XXX race condition if mlx5_tx_burst() is still running. */
785 for (i = 0; (i != priv->txqs_n); ++i)
786 mlx5_txq_release(dev, i);
790 mlx5_proc_priv_uninit(dev);
791 mlx5_mprq_free_mp(dev);
792 /* Remove from memory callback device list. */
793 rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
795 LIST_REMOVE(priv->sh, mem_event_cb);
796 rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
797 mlx5_free_shared_dr(priv);
798 if (priv->rss_conf.rss_key != NULL)
799 rte_free(priv->rss_conf.rss_key);
800 if (priv->reta_idx != NULL)
801 rte_free(priv->reta_idx);
803 mlx5_nl_mac_addr_flush(dev);
804 if (priv->nl_socket_route >= 0)
805 close(priv->nl_socket_route);
806 if (priv->nl_socket_rdma >= 0)
807 close(priv->nl_socket_rdma);
810 * Free the shared context in last turn, because the cleanup
811 * routines above may use some shared fields, like
812 * mlx5_nl_mac_addr_flush() uses ibdev_path for retrieveing
813 * ifindex if Netlink fails.
815 mlx5_free_shared_ibctx(priv->sh);
818 ret = mlx5_hrxq_ibv_verify(dev);
820 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
822 ret = mlx5_ind_table_ibv_verify(dev);
824 DRV_LOG(WARNING, "port %u some indirection table still remain",
826 ret = mlx5_rxq_ibv_verify(dev);
828 DRV_LOG(WARNING, "port %u some Verbs Rx queue still remain",
830 ret = mlx5_rxq_verify(dev);
832 DRV_LOG(WARNING, "port %u some Rx queues still remain",
834 ret = mlx5_txq_ibv_verify(dev);
836 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
838 ret = mlx5_txq_verify(dev);
840 DRV_LOG(WARNING, "port %u some Tx queues still remain",
842 ret = mlx5_flow_verify(dev);
844 DRV_LOG(WARNING, "port %u some flows still remain",
846 if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
850 RTE_ETH_FOREACH_DEV_OF(port_id, dev->device) {
851 struct mlx5_priv *opriv =
852 rte_eth_devices[port_id].data->dev_private;
855 opriv->domain_id != priv->domain_id ||
856 &rte_eth_devices[port_id] == dev)
861 claim_zero(rte_eth_switch_domain_free(priv->domain_id));
863 memset(priv, 0, sizeof(*priv));
864 priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
866 * Reset mac_addrs to NULL such that it is not freed as part of
867 * rte_eth_dev_release_port(). mac_addrs is part of dev_private so
868 * it is freed when dev_private is freed.
870 dev->data->mac_addrs = NULL;
873 const struct eth_dev_ops mlx5_dev_ops = {
874 .dev_configure = mlx5_dev_configure,
875 .dev_start = mlx5_dev_start,
876 .dev_stop = mlx5_dev_stop,
877 .dev_set_link_down = mlx5_set_link_down,
878 .dev_set_link_up = mlx5_set_link_up,
879 .dev_close = mlx5_dev_close,
880 .promiscuous_enable = mlx5_promiscuous_enable,
881 .promiscuous_disable = mlx5_promiscuous_disable,
882 .allmulticast_enable = mlx5_allmulticast_enable,
883 .allmulticast_disable = mlx5_allmulticast_disable,
884 .link_update = mlx5_link_update,
885 .stats_get = mlx5_stats_get,
886 .stats_reset = mlx5_stats_reset,
887 .xstats_get = mlx5_xstats_get,
888 .xstats_reset = mlx5_xstats_reset,
889 .xstats_get_names = mlx5_xstats_get_names,
890 .fw_version_get = mlx5_fw_version_get,
891 .dev_infos_get = mlx5_dev_infos_get,
892 .read_clock = mlx5_read_clock,
893 .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
894 .vlan_filter_set = mlx5_vlan_filter_set,
895 .rx_queue_setup = mlx5_rx_queue_setup,
896 .tx_queue_setup = mlx5_tx_queue_setup,
897 .rx_queue_release = mlx5_rx_queue_release,
898 .tx_queue_release = mlx5_tx_queue_release,
899 .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
900 .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
901 .mac_addr_remove = mlx5_mac_addr_remove,
902 .mac_addr_add = mlx5_mac_addr_add,
903 .mac_addr_set = mlx5_mac_addr_set,
904 .set_mc_addr_list = mlx5_set_mc_addr_list,
905 .mtu_set = mlx5_dev_set_mtu,
906 .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
907 .vlan_offload_set = mlx5_vlan_offload_set,
908 .reta_update = mlx5_dev_rss_reta_update,
909 .reta_query = mlx5_dev_rss_reta_query,
910 .rss_hash_update = mlx5_rss_hash_update,
911 .rss_hash_conf_get = mlx5_rss_hash_conf_get,
912 .filter_ctrl = mlx5_dev_filter_ctrl,
913 .rx_descriptor_status = mlx5_rx_descriptor_status,
914 .tx_descriptor_status = mlx5_tx_descriptor_status,
915 .rx_queue_count = mlx5_rx_queue_count,
916 .rx_queue_intr_enable = mlx5_rx_intr_enable,
917 .rx_queue_intr_disable = mlx5_rx_intr_disable,
918 .is_removed = mlx5_is_removed,
921 /* Available operations from secondary process. */
922 static const struct eth_dev_ops mlx5_dev_sec_ops = {
923 .stats_get = mlx5_stats_get,
924 .stats_reset = mlx5_stats_reset,
925 .xstats_get = mlx5_xstats_get,
926 .xstats_reset = mlx5_xstats_reset,
927 .xstats_get_names = mlx5_xstats_get_names,
928 .fw_version_get = mlx5_fw_version_get,
929 .dev_infos_get = mlx5_dev_infos_get,
930 .rx_descriptor_status = mlx5_rx_descriptor_status,
931 .tx_descriptor_status = mlx5_tx_descriptor_status,
934 /* Available operations in flow isolated mode. */
935 const struct eth_dev_ops mlx5_dev_ops_isolate = {
936 .dev_configure = mlx5_dev_configure,
937 .dev_start = mlx5_dev_start,
938 .dev_stop = mlx5_dev_stop,
939 .dev_set_link_down = mlx5_set_link_down,
940 .dev_set_link_up = mlx5_set_link_up,
941 .dev_close = mlx5_dev_close,
942 .promiscuous_enable = mlx5_promiscuous_enable,
943 .promiscuous_disable = mlx5_promiscuous_disable,
944 .allmulticast_enable = mlx5_allmulticast_enable,
945 .allmulticast_disable = mlx5_allmulticast_disable,
946 .link_update = mlx5_link_update,
947 .stats_get = mlx5_stats_get,
948 .stats_reset = mlx5_stats_reset,
949 .xstats_get = mlx5_xstats_get,
950 .xstats_reset = mlx5_xstats_reset,
951 .xstats_get_names = mlx5_xstats_get_names,
952 .fw_version_get = mlx5_fw_version_get,
953 .dev_infos_get = mlx5_dev_infos_get,
954 .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
955 .vlan_filter_set = mlx5_vlan_filter_set,
956 .rx_queue_setup = mlx5_rx_queue_setup,
957 .tx_queue_setup = mlx5_tx_queue_setup,
958 .rx_queue_release = mlx5_rx_queue_release,
959 .tx_queue_release = mlx5_tx_queue_release,
960 .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
961 .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
962 .mac_addr_remove = mlx5_mac_addr_remove,
963 .mac_addr_add = mlx5_mac_addr_add,
964 .mac_addr_set = mlx5_mac_addr_set,
965 .set_mc_addr_list = mlx5_set_mc_addr_list,
966 .mtu_set = mlx5_dev_set_mtu,
967 .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
968 .vlan_offload_set = mlx5_vlan_offload_set,
969 .filter_ctrl = mlx5_dev_filter_ctrl,
970 .rx_descriptor_status = mlx5_rx_descriptor_status,
971 .tx_descriptor_status = mlx5_tx_descriptor_status,
972 .rx_queue_intr_enable = mlx5_rx_intr_enable,
973 .rx_queue_intr_disable = mlx5_rx_intr_disable,
974 .is_removed = mlx5_is_removed,
978 * Verify and store value for device argument.
981 * Key argument to verify.
983 * Value associated with key.
988 * 0 on success, a negative errno value otherwise and rte_errno is set.
991 mlx5_args_check(const char *key, const char *val, void *opaque)
993 struct mlx5_dev_config *config = opaque;
996 /* No-op, port representors are processed in mlx5_dev_spawn(). */
997 if (!strcmp(MLX5_REPRESENTOR, key))
1000 tmp = strtoul(val, NULL, 0);
1003 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
1006 if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
1007 config->cqe_comp = !!tmp;
1008 } else if (strcmp(MLX5_RXQ_CQE_PAD_EN, key) == 0) {
1009 config->cqe_pad = !!tmp;
1010 } else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
1011 config->hw_padding = !!tmp;
1012 } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
1013 config->mprq.enabled = !!tmp;
1014 } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
1015 config->mprq.stride_num_n = tmp;
1016 } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
1017 config->mprq.max_memcpy_len = tmp;
1018 } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
1019 config->mprq.min_rxqs_num = tmp;
1020 } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
1021 DRV_LOG(WARNING, "%s: deprecated parameter,"
1022 " converted to txq_inline_max", key);
1023 config->txq_inline_max = tmp;
1024 } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
1025 config->txq_inline_max = tmp;
1026 } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
1027 config->txq_inline_min = tmp;
1028 } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
1029 config->txq_inline_mpw = tmp;
1030 } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
1031 config->txqs_inline = tmp;
1032 } else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
1033 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1034 } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
1035 config->mps = !!tmp;
1036 } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
1037 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1038 } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
1039 DRV_LOG(WARNING, "%s: deprecated parameter,"
1040 " converted to txq_inline_mpw", key);
1041 config->txq_inline_mpw = tmp;
1042 } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
1043 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
1044 } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
1045 config->rx_vec_en = !!tmp;
1046 } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
1047 config->l3_vxlan_en = !!tmp;
1048 } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
1049 config->vf_nl_en = !!tmp;
1050 } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
1051 config->dv_esw_en = !!tmp;
1052 } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
1053 config->dv_flow_en = !!tmp;
1054 } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
1055 config->mr_ext_memseg_en = !!tmp;
1056 } else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
1057 config->max_dump_files_num = tmp;
1058 } else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
1059 config->lro.timeout = tmp;
1061 DRV_LOG(WARNING, "%s: unknown parameter", key);
1069 * Parse device parameters.
1072 * Pointer to device configuration structure.
1074 * Device arguments structure.
1077 * 0 on success, a negative errno value otherwise and rte_errno is set.
1080 mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
1082 const char **params = (const char *[]){
1083 MLX5_RXQ_CQE_COMP_EN,
1084 MLX5_RXQ_CQE_PAD_EN,
1085 MLX5_RXQ_PKT_PAD_EN,
1087 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
1088 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
1091 MLX5_TXQ_INLINE_MIN,
1092 MLX5_TXQ_INLINE_MAX,
1093 MLX5_TXQ_INLINE_MPW,
1094 MLX5_TXQS_MIN_INLINE,
1097 MLX5_TXQ_MPW_HDR_DSEG_EN,
1098 MLX5_TXQ_MAX_INLINE_LEN,
1105 MLX5_MR_EXT_MEMSEG_EN,
1107 MLX5_MAX_DUMP_FILES_NUM,
1108 MLX5_LRO_TIMEOUT_USEC,
1111 struct rte_kvargs *kvlist;
1115 if (devargs == NULL)
1117 /* Following UGLY cast is done to pass checkpatch. */
1118 kvlist = rte_kvargs_parse(devargs->args, params);
1119 if (kvlist == NULL) {
1123 /* Process parameters. */
1124 for (i = 0; (params[i] != NULL); ++i) {
1125 if (rte_kvargs_count(kvlist, params[i])) {
1126 ret = rte_kvargs_process(kvlist, params[i],
1127 mlx5_args_check, config);
1130 rte_kvargs_free(kvlist);
1135 rte_kvargs_free(kvlist);
1139 static struct rte_pci_driver mlx5_driver;
1142 * PMD global initialization.
1144 * Independent from individual device, this function initializes global
1145 * per-PMD data structures distinguishing primary and secondary processes.
1146 * Hence, each initialization is called once per a process.
1149 * 0 on success, a negative errno value otherwise and rte_errno is set.
1152 mlx5_init_once(void)
1154 struct mlx5_shared_data *sd;
1155 struct mlx5_local_data *ld = &mlx5_local_data;
1158 if (mlx5_init_shared_data())
1160 sd = mlx5_shared_data;
1162 rte_spinlock_lock(&sd->lock);
1163 switch (rte_eal_process_type()) {
1164 case RTE_PROC_PRIMARY:
1167 LIST_INIT(&sd->mem_event_cb_list);
1168 rte_rwlock_init(&sd->mem_event_rwlock);
1169 rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
1170 mlx5_mr_mem_event_cb, NULL);
1171 ret = mlx5_mp_init_primary();
1174 sd->init_done = true;
1176 case RTE_PROC_SECONDARY:
1179 ret = mlx5_mp_init_secondary();
1182 ++sd->secondary_cnt;
1183 ld->init_done = true;
1189 rte_spinlock_unlock(&sd->lock);
1194 * Configures the minimal amount of data to inline into WQE
1195 * while sending packets.
1197 * - the txq_inline_min has the maximal priority, if this
1198 * key is specified in devargs
1199 * - if DevX is enabled the inline mode is queried from the
1200 * device (HCA attributes and NIC vport context if needed).
1201 * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
1202 * and none (0 bytes) for other NICs
1205 * Verbs device parameters (name, port, switch_info) to spawn.
1207 * Device configuration parameters.
1210 mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
1211 struct mlx5_dev_config *config)
1213 if (config->txq_inline_min != MLX5_ARG_UNSET) {
1214 /* Application defines size of inlined data explicitly. */
1215 switch (spawn->pci_dev->id.device_id) {
1216 case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
1217 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1218 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
1219 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
1220 if (config->txq_inline_min <
1221 (int)MLX5_INLINE_HSIZE_L2) {
1223 "txq_inline_mix aligned to minimal"
1224 " ConnectX-4 required value %d",
1225 (int)MLX5_INLINE_HSIZE_L2);
1226 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1232 if (config->hca_attr.eth_net_offloads) {
1233 /* We have DevX enabled, inline mode queried successfully. */
1234 switch (config->hca_attr.wqe_inline_mode) {
1235 case MLX5_CAP_INLINE_MODE_L2:
1236 /* outer L2 header must be inlined. */
1237 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1239 case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
1240 /* No inline data are required by NIC. */
1241 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1242 config->hw_vlan_insert =
1243 config->hca_attr.wqe_vlan_insert;
1244 DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
1246 case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
1247 /* inline mode is defined by NIC vport context. */
1248 if (!config->hca_attr.eth_virt)
1250 switch (config->hca_attr.vport_inline_mode) {
1251 case MLX5_INLINE_MODE_NONE:
1252 config->txq_inline_min =
1253 MLX5_INLINE_HSIZE_NONE;
1255 case MLX5_INLINE_MODE_L2:
1256 config->txq_inline_min =
1257 MLX5_INLINE_HSIZE_L2;
1259 case MLX5_INLINE_MODE_IP:
1260 config->txq_inline_min =
1261 MLX5_INLINE_HSIZE_L3;
1263 case MLX5_INLINE_MODE_TCP_UDP:
1264 config->txq_inline_min =
1265 MLX5_INLINE_HSIZE_L4;
1267 case MLX5_INLINE_MODE_INNER_L2:
1268 config->txq_inline_min =
1269 MLX5_INLINE_HSIZE_INNER_L2;
1271 case MLX5_INLINE_MODE_INNER_IP:
1272 config->txq_inline_min =
1273 MLX5_INLINE_HSIZE_INNER_L3;
1275 case MLX5_INLINE_MODE_INNER_TCP_UDP:
1276 config->txq_inline_min =
1277 MLX5_INLINE_HSIZE_INNER_L4;
1283 * We get here if we are unable to deduce
1284 * inline data size with DevX. Try PCI ID
1285 * to determine old NICs.
1287 switch (spawn->pci_dev->id.device_id) {
1288 case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
1289 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
1290 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
1291 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
1292 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
1293 config->hw_vlan_insert = 0;
1295 case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
1296 case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
1297 case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
1298 case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
1300 * These NICs support VLAN insertion from WQE and
1301 * report the wqe_vlan_insert flag. But there is the bug
1302 * and PFC control may be broken, so disable feature.
1304 config->hw_vlan_insert = 0;
1307 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
1311 DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
1315 * Spawn an Ethernet device from Verbs information.
1318 * Backing DPDK device.
1320 * Verbs device parameters (name, port, switch_info) to spawn.
1322 * Device configuration parameters.
1325 * A valid Ethernet device object on success, NULL otherwise and rte_errno
1326 * is set. The following errors are defined:
1328 * EBUSY: device is not supposed to be spawned.
1329 * EEXIST: device is already spawned
1331 static struct rte_eth_dev *
1332 mlx5_dev_spawn(struct rte_device *dpdk_dev,
1333 struct mlx5_dev_spawn_data *spawn,
1334 struct mlx5_dev_config config)
1336 const struct mlx5_switch_info *switch_info = &spawn->info;
1337 struct mlx5_ibv_shared *sh = NULL;
1338 struct ibv_port_attr port_attr;
1339 struct mlx5dv_context dv_attr = { .comp_mask = 0 };
1340 struct rte_eth_dev *eth_dev = NULL;
1341 struct mlx5_priv *priv = NULL;
1343 unsigned int hw_padding = 0;
1345 unsigned int cqe_comp;
1346 unsigned int cqe_pad = 0;
1347 unsigned int tunnel_en = 0;
1348 unsigned int mpls_en = 0;
1349 unsigned int swp = 0;
1350 unsigned int mprq = 0;
1351 unsigned int mprq_min_stride_size_n = 0;
1352 unsigned int mprq_max_stride_size_n = 0;
1353 unsigned int mprq_min_stride_num_n = 0;
1354 unsigned int mprq_max_stride_num_n = 0;
1355 struct rte_ether_addr mac;
1356 char name[RTE_ETH_NAME_MAX_LEN];
1357 int own_domain_id = 0;
1361 /* Determine if this port representor is supposed to be spawned. */
1362 if (switch_info->representor && dpdk_dev->devargs) {
1363 struct rte_eth_devargs eth_da;
1365 err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da);
1368 DRV_LOG(ERR, "failed to process device arguments: %s",
1369 strerror(rte_errno));
1372 for (i = 0; i < eth_da.nb_representor_ports; ++i)
1373 if (eth_da.representor_ports[i] ==
1374 (uint16_t)switch_info->port_name)
1376 if (i == eth_da.nb_representor_ports) {
1381 /* Build device name. */
1382 if (!switch_info->representor)
1383 strlcpy(name, dpdk_dev->name, sizeof(name));
1385 snprintf(name, sizeof(name), "%s_representor_%u",
1386 dpdk_dev->name, switch_info->port_name);
1387 /* check if the device is already spawned */
1388 if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
1392 DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
1393 if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
1394 eth_dev = rte_eth_dev_attach_secondary(name);
1395 if (eth_dev == NULL) {
1396 DRV_LOG(ERR, "can not attach rte ethdev");
1400 eth_dev->device = dpdk_dev;
1401 eth_dev->dev_ops = &mlx5_dev_sec_ops;
1402 err = mlx5_proc_priv_init(eth_dev);
1405 /* Receive command fd from primary process */
1406 err = mlx5_mp_req_verbs_cmd_fd(eth_dev);
1409 /* Remap UAR for Tx queues. */
1410 err = mlx5_tx_uar_init_secondary(eth_dev, err);
1414 * Ethdev pointer is still required as input since
1415 * the primary device is not accessible from the
1416 * secondary process.
1418 eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev);
1419 eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
1422 sh = mlx5_alloc_shared_ibctx(spawn);
1425 config.devx = sh->devx;
1426 #ifdef HAVE_MLX5DV_DR_ACTION_DEST_DEVX_TIR
1427 config.dest_tir = 1;
1429 #ifdef HAVE_IBV_MLX5_MOD_SWP
1430 dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
1433 * Multi-packet send is supported by ConnectX-4 Lx PF as well
1434 * as all ConnectX-5 devices.
1436 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1437 dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
1439 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
1440 dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ;
1442 mlx5_glue->dv_query_device(sh->ctx, &dv_attr);
1443 if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
1444 if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
1445 DRV_LOG(DEBUG, "enhanced MPW is supported");
1446 mps = MLX5_MPW_ENHANCED;
1448 DRV_LOG(DEBUG, "MPW is supported");
1452 DRV_LOG(DEBUG, "MPW isn't supported");
1453 mps = MLX5_MPW_DISABLED;
1455 #ifdef HAVE_IBV_MLX5_MOD_SWP
1456 if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
1457 swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
1458 DRV_LOG(DEBUG, "SWP support: %u", swp);
1461 #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
1462 if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
1463 struct mlx5dv_striding_rq_caps mprq_caps =
1464 dv_attr.striding_rq_caps;
1466 DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d",
1467 mprq_caps.min_single_stride_log_num_of_bytes);
1468 DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d",
1469 mprq_caps.max_single_stride_log_num_of_bytes);
1470 DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d",
1471 mprq_caps.min_single_wqe_log_num_of_strides);
1472 DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d",
1473 mprq_caps.max_single_wqe_log_num_of_strides);
1474 DRV_LOG(DEBUG, "\tsupported_qpts: %d",
1475 mprq_caps.supported_qpts);
1476 DRV_LOG(DEBUG, "device supports Multi-Packet RQ");
1478 mprq_min_stride_size_n =
1479 mprq_caps.min_single_stride_log_num_of_bytes;
1480 mprq_max_stride_size_n =
1481 mprq_caps.max_single_stride_log_num_of_bytes;
1482 mprq_min_stride_num_n =
1483 mprq_caps.min_single_wqe_log_num_of_strides;
1484 mprq_max_stride_num_n =
1485 mprq_caps.max_single_wqe_log_num_of_strides;
1486 config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
1487 mprq_min_stride_num_n);
1490 if (RTE_CACHE_LINE_SIZE == 128 &&
1491 !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
1495 config.cqe_comp = cqe_comp;
1496 #ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD
1497 /* Whether device supports 128B Rx CQE padding. */
1498 cqe_pad = RTE_CACHE_LINE_SIZE == 128 &&
1499 (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_PAD);
1501 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
1502 if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
1503 tunnel_en = ((dv_attr.tunnel_offloads_caps &
1504 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
1505 (dv_attr.tunnel_offloads_caps &
1506 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
1508 DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
1509 tunnel_en ? "" : "not ");
1512 "tunnel offloading disabled due to old OFED/rdma-core version");
1514 config.tunnel_en = tunnel_en;
1515 #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
1516 mpls_en = ((dv_attr.tunnel_offloads_caps &
1517 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
1518 (dv_attr.tunnel_offloads_caps &
1519 MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP));
1520 DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported",
1521 mpls_en ? "" : "not ");
1523 DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
1524 " old OFED/rdma-core version or firmware configuration");
1526 config.mpls_en = mpls_en;
1527 /* Check port status. */
1528 err = mlx5_glue->query_port(sh->ctx, spawn->ibv_port, &port_attr);
1530 DRV_LOG(ERR, "port query failed: %s", strerror(err));
1533 if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
1534 DRV_LOG(ERR, "port is not configured in Ethernet mode");
1538 if (port_attr.state != IBV_PORT_ACTIVE)
1539 DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
1540 mlx5_glue->port_state_str(port_attr.state),
1542 /* Allocate private eth device data. */
1543 priv = rte_zmalloc("ethdev private structure",
1545 RTE_CACHE_LINE_SIZE);
1547 DRV_LOG(ERR, "priv allocation failure");
1552 priv->ibv_port = spawn->ibv_port;
1553 priv->mtu = RTE_ETHER_MTU;
1555 /* Initialize UAR access locks for 32bit implementations. */
1556 rte_spinlock_init(&priv->uar_lock_cq);
1557 for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
1558 rte_spinlock_init(&priv->uar_lock[i]);
1560 /* Some internal functions rely on Netlink sockets, open them now. */
1561 priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
1562 priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
1564 priv->representor = !!switch_info->representor;
1565 priv->master = !!switch_info->master;
1566 priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
1568 * Currently we support single E-Switch per PF configurations
1569 * only and vport_id field contains the vport index for
1570 * associated VF, which is deduced from representor port name.
1571 * For example, let's have the IB device port 10, it has
1572 * attached network device eth0, which has port name attribute
1573 * pf0vf2, we can deduce the VF number as 2, and set vport index
1574 * as 3 (2+1). This assigning schema should be changed if the
1575 * multiple E-Switch instances per PF configurations or/and PCI
1576 * subfunctions are added.
1578 priv->vport_id = switch_info->representor ?
1579 switch_info->port_name + 1 : -1;
1580 /* representor_id field keeps the unmodified port/VF index. */
1581 priv->representor_id = switch_info->representor ?
1582 switch_info->port_name : -1;
1584 * Look for sibling devices in order to reuse their switch domain
1585 * if any, otherwise allocate one.
1587 RTE_ETH_FOREACH_DEV_OF(port_id, dpdk_dev) {
1588 const struct mlx5_priv *opriv =
1589 rte_eth_devices[port_id].data->dev_private;
1593 RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
1595 priv->domain_id = opriv->domain_id;
1598 if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
1599 err = rte_eth_switch_domain_alloc(&priv->domain_id);
1602 DRV_LOG(ERR, "unable to allocate switch domain: %s",
1603 strerror(rte_errno));
1608 err = mlx5_args(&config, dpdk_dev->devargs);
1611 DRV_LOG(ERR, "failed to process device arguments: %s",
1612 strerror(rte_errno));
1615 config.hw_csum = !!(sh->device_attr.device_cap_flags_ex &
1616 IBV_DEVICE_RAW_IP_CSUM);
1617 DRV_LOG(DEBUG, "checksum offloading is %ssupported",
1618 (config.hw_csum ? "" : "not "));
1619 #if !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42) && \
1620 !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
1621 DRV_LOG(DEBUG, "counters are not supported");
1623 #ifndef HAVE_IBV_FLOW_DV_SUPPORT
1624 if (config.dv_flow_en) {
1625 DRV_LOG(WARNING, "DV flow is not supported");
1626 config.dv_flow_en = 0;
1629 config.ind_table_max_size =
1630 sh->device_attr.rss_caps.max_rwq_indirection_table_size;
1632 * Remove this check once DPDK supports larger/variable
1633 * indirection tables.
1635 if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
1636 config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
1637 DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
1638 config.ind_table_max_size);
1639 config.hw_vlan_strip = !!(sh->device_attr.raw_packet_caps &
1640 IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
1641 DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
1642 (config.hw_vlan_strip ? "" : "not "));
1643 config.hw_fcs_strip = !!(sh->device_attr.raw_packet_caps &
1644 IBV_RAW_PACKET_CAP_SCATTER_FCS);
1645 DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
1646 (config.hw_fcs_strip ? "" : "not "));
1647 #if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING)
1648 hw_padding = !!sh->device_attr.rx_pad_end_addr_align;
1649 #elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING)
1650 hw_padding = !!(sh->device_attr.device_cap_flags_ex &
1651 IBV_DEVICE_PCI_WRITE_END_PADDING);
1653 if (config.hw_padding && !hw_padding) {
1654 DRV_LOG(DEBUG, "Rx end alignment padding isn't supported");
1655 config.hw_padding = 0;
1656 } else if (config.hw_padding) {
1657 DRV_LOG(DEBUG, "Rx end alignment padding is enabled");
1659 config.tso = (sh->device_attr.tso_caps.max_tso > 0 &&
1660 (sh->device_attr.tso_caps.supported_qpts &
1661 (1 << IBV_QPT_RAW_PACKET)));
1663 config.tso_max_payload_sz = sh->device_attr.tso_caps.max_tso;
1665 * MPW is disabled by default, while the Enhanced MPW is enabled
1668 if (config.mps == MLX5_ARG_UNSET)
1669 config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED :
1672 config.mps = config.mps ? mps : MLX5_MPW_DISABLED;
1673 DRV_LOG(INFO, "%sMPS is %s",
1674 config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
1675 config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
1676 if (config.cqe_comp && !cqe_comp) {
1677 DRV_LOG(WARNING, "Rx CQE compression isn't supported");
1678 config.cqe_comp = 0;
1680 if (config.cqe_pad && !cqe_pad) {
1681 DRV_LOG(WARNING, "Rx CQE padding isn't supported");
1683 } else if (config.cqe_pad) {
1684 DRV_LOG(INFO, "Rx CQE padding is enabled");
1687 priv->counter_fallback = 0;
1688 err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr);
1693 if (!config.hca_attr.flow_counters_dump)
1694 priv->counter_fallback = 1;
1695 #ifndef HAVE_IBV_DEVX_ASYNC
1696 priv->counter_fallback = 1;
1698 if (priv->counter_fallback)
1699 DRV_LOG(INFO, "Use fall-back DV counter management\n");
1700 /* Check for LRO support. */
1701 if (config.dest_tir && mprq && config.hca_attr.lro_cap) {
1702 /* TBD check tunnel lro caps. */
1703 config.lro.supported = config.hca_attr.lro_cap;
1704 DRV_LOG(DEBUG, "Device supports LRO");
1706 * If LRO timeout is not configured by application,
1707 * use the minimal supported value.
1709 if (!config.lro.timeout)
1710 config.lro.timeout =
1711 config.hca_attr.lro_timer_supported_periods[0];
1712 DRV_LOG(DEBUG, "LRO session timeout set to %d usec",
1713 config.lro.timeout);
1714 config.mprq.enabled = 1;
1715 DRV_LOG(DEBUG, "Enable MPRQ for LRO use");
1718 if (config.mprq.enabled && mprq) {
1719 if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
1720 config.mprq.stride_num_n < mprq_min_stride_num_n) {
1721 config.mprq.stride_num_n =
1722 RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
1723 mprq_min_stride_num_n);
1725 "the number of strides"
1726 " for Multi-Packet RQ is out of range,"
1727 " setting default value (%u)",
1728 1 << config.mprq.stride_num_n);
1730 config.mprq.min_stride_size_n = mprq_min_stride_size_n;
1731 config.mprq.max_stride_size_n = mprq_max_stride_size_n;
1732 } else if (config.mprq.enabled && !mprq) {
1733 DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
1734 config.mprq.enabled = 0;
1736 if (config.max_dump_files_num == 0)
1737 config.max_dump_files_num = 128;
1738 eth_dev = rte_eth_dev_allocate(name);
1739 if (eth_dev == NULL) {
1740 DRV_LOG(ERR, "can not allocate rte ethdev");
1744 /* Flag to call rte_eth_dev_release_port() in rte_eth_dev_close(). */
1745 eth_dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
1746 if (priv->representor) {
1747 eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
1748 eth_dev->data->representor_id = priv->representor_id;
1751 * Store associated network device interface index. This index
1752 * is permanent throughout the lifetime of device. So, we may store
1753 * the ifindex here and use the cached value further.
1755 assert(spawn->ifindex);
1756 priv->if_index = spawn->ifindex;
1757 eth_dev->data->dev_private = priv;
1758 priv->dev_data = eth_dev->data;
1759 eth_dev->data->mac_addrs = priv->mac;
1760 eth_dev->device = dpdk_dev;
1761 /* Configure the first MAC address by default. */
1762 if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
1764 "port %u cannot get MAC address, is mlx5_en"
1765 " loaded? (errno: %s)",
1766 eth_dev->data->port_id, strerror(rte_errno));
1771 "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
1772 eth_dev->data->port_id,
1773 mac.addr_bytes[0], mac.addr_bytes[1],
1774 mac.addr_bytes[2], mac.addr_bytes[3],
1775 mac.addr_bytes[4], mac.addr_bytes[5]);
1778 char ifname[IF_NAMESIZE];
1780 if (mlx5_get_ifname(eth_dev, &ifname) == 0)
1781 DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
1782 eth_dev->data->port_id, ifname);
1784 DRV_LOG(DEBUG, "port %u ifname is unknown",
1785 eth_dev->data->port_id);
1788 /* Get actual MTU if possible. */
1789 err = mlx5_get_mtu(eth_dev, &priv->mtu);
1794 DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
1796 /* Initialize burst functions to prevent crashes before link-up. */
1797 eth_dev->rx_pkt_burst = removed_rx_burst;
1798 eth_dev->tx_pkt_burst = removed_tx_burst;
1799 eth_dev->dev_ops = &mlx5_dev_ops;
1800 /* Register MAC address. */
1801 claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
1802 if (config.vf && config.vf_nl_en)
1803 mlx5_nl_mac_addr_sync(eth_dev);
1804 TAILQ_INIT(&priv->flows);
1805 TAILQ_INIT(&priv->ctrl_flows);
1806 /* Hint libmlx5 to use PMD allocator for data plane resources */
1807 struct mlx5dv_ctx_allocators alctr = {
1808 .alloc = &mlx5_alloc_verbs_buf,
1809 .free = &mlx5_free_verbs_buf,
1812 mlx5_glue->dv_set_context_attr(sh->ctx,
1813 MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
1814 (void *)((uintptr_t)&alctr));
1815 /* Bring Ethernet device up. */
1816 DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
1817 eth_dev->data->port_id);
1818 mlx5_set_link_up(eth_dev);
1820 * Even though the interrupt handler is not installed yet,
1821 * interrupts will still trigger on the async_fd from
1822 * Verbs context returned by ibv_open_device().
1824 mlx5_link_update(eth_dev, 0);
1825 #ifdef HAVE_MLX5DV_DR_ESWITCH
1826 if (!(config.hca_attr.eswitch_manager && config.dv_flow_en &&
1827 (switch_info->representor || switch_info->master)))
1828 config.dv_esw_en = 0;
1830 config.dv_esw_en = 0;
1832 /* Detect minimal data bytes to inline. */
1833 mlx5_set_min_inline(spawn, &config);
1834 /* Store device configuration on private structure. */
1835 priv->config = config;
1836 if (config.dv_flow_en) {
1837 err = mlx5_alloc_shared_dr(priv);
1841 /* Supported Verbs flow priority number detection. */
1842 err = mlx5_flow_discover_priorities(eth_dev);
1847 priv->config.flow_prio = err;
1848 /* Add device to memory callback list. */
1849 rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
1850 LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
1852 rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
1857 mlx5_free_shared_dr(priv);
1858 if (priv->nl_socket_route >= 0)
1859 close(priv->nl_socket_route);
1860 if (priv->nl_socket_rdma >= 0)
1861 close(priv->nl_socket_rdma);
1863 claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1865 if (eth_dev != NULL)
1866 eth_dev->data->dev_private = NULL;
1868 if (eth_dev != NULL) {
1869 /* mac_addrs must not be freed alone because part of dev_private */
1870 eth_dev->data->mac_addrs = NULL;
1871 rte_eth_dev_release_port(eth_dev);
1874 mlx5_free_shared_ibctx(sh);
1881 * Comparison callback to sort device data.
1883 * This is meant to be used with qsort().
1886 * Pointer to pointer to first data object.
1888 * Pointer to pointer to second data object.
1891 * 0 if both objects are equal, less than 0 if the first argument is less
1892 * than the second, greater than 0 otherwise.
1895 mlx5_dev_spawn_data_cmp(const void *a, const void *b)
1897 const struct mlx5_switch_info *si_a =
1898 &((const struct mlx5_dev_spawn_data *)a)->info;
1899 const struct mlx5_switch_info *si_b =
1900 &((const struct mlx5_dev_spawn_data *)b)->info;
1903 /* Master device first. */
1904 ret = si_b->master - si_a->master;
1907 /* Then representor devices. */
1908 ret = si_b->representor - si_a->representor;
1911 /* Unidentified devices come last in no specific order. */
1912 if (!si_a->representor)
1914 /* Order representors by name. */
1915 return si_a->port_name - si_b->port_name;
1919 * DPDK callback to register a PCI device.
1921 * This function spawns Ethernet devices out of a given PCI device.
1923 * @param[in] pci_drv
1924 * PCI driver structure (mlx5_driver).
1925 * @param[in] pci_dev
1926 * PCI device information.
1929 * 0 on success, a negative errno value otherwise and rte_errno is set.
1932 mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
1933 struct rte_pci_device *pci_dev)
1935 struct ibv_device **ibv_list;
1937 * Number of found IB Devices matching with requested PCI BDF.
1938 * nd != 1 means there are multiple IB devices over the same
1939 * PCI device and we have representors and master.
1941 unsigned int nd = 0;
1943 * Number of found IB device Ports. nd = 1 and np = 1..n means
1944 * we have the single multiport IB device, and there may be
1945 * representors attached to some of found ports.
1947 unsigned int np = 0;
1949 * Number of DPDK ethernet devices to Spawn - either over
1950 * multiple IB devices or multiple ports of single IB device.
1951 * Actually this is the number of iterations to spawn.
1953 unsigned int ns = 0;
1954 struct mlx5_dev_config dev_config;
1957 ret = mlx5_init_once();
1959 DRV_LOG(ERR, "unable to init PMD global data: %s",
1960 strerror(rte_errno));
1963 assert(pci_drv == &mlx5_driver);
1965 ibv_list = mlx5_glue->get_device_list(&ret);
1967 rte_errno = errno ? errno : ENOSYS;
1968 DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?");
1972 * First scan the list of all Infiniband devices to find
1973 * matching ones, gathering into the list.
1975 struct ibv_device *ibv_match[ret + 1];
1981 struct rte_pci_addr pci_addr;
1983 DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
1984 if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr))
1986 if (pci_dev->addr.domain != pci_addr.domain ||
1987 pci_dev->addr.bus != pci_addr.bus ||
1988 pci_dev->addr.devid != pci_addr.devid ||
1989 pci_dev->addr.function != pci_addr.function)
1991 DRV_LOG(INFO, "PCI information matches for device \"%s\"",
1992 ibv_list[ret]->name);
1993 ibv_match[nd++] = ibv_list[ret];
1995 ibv_match[nd] = NULL;
1997 /* No device matches, just complain and bail out. */
1998 mlx5_glue->free_device_list(ibv_list);
2000 "no Verbs device matches PCI device " PCI_PRI_FMT ","
2001 " are kernel drivers loaded?",
2002 pci_dev->addr.domain, pci_dev->addr.bus,
2003 pci_dev->addr.devid, pci_dev->addr.function);
2008 nl_route = mlx5_nl_init(NETLINK_ROUTE);
2009 nl_rdma = mlx5_nl_init(NETLINK_RDMA);
2012 * Found single matching device may have multiple ports.
2013 * Each port may be representor, we have to check the port
2014 * number and check the representors existence.
2017 np = mlx5_nl_portnum(nl_rdma, ibv_match[0]->name);
2019 DRV_LOG(WARNING, "can not get IB device \"%s\""
2020 " ports number", ibv_match[0]->name);
2023 * Now we can determine the maximal
2024 * amount of devices to be spawned.
2026 struct mlx5_dev_spawn_data list[np ? np : nd];
2030 * Single IB device with multiple ports found,
2031 * it may be E-Switch master device and representors.
2032 * We have to perform identification trough the ports.
2034 assert(nl_rdma >= 0);
2037 for (i = 1; i <= np; ++i) {
2038 list[ns].max_port = np;
2039 list[ns].ibv_port = i;
2040 list[ns].ibv_dev = ibv_match[0];
2041 list[ns].eth_dev = NULL;
2042 list[ns].pci_dev = pci_dev;
2043 list[ns].ifindex = mlx5_nl_ifindex
2044 (nl_rdma, list[ns].ibv_dev->name, i);
2045 if (!list[ns].ifindex) {
2047 * No network interface index found for the
2048 * specified port, it means there is no
2049 * representor on this port. It's OK,
2050 * there can be disabled ports, for example
2051 * if sriov_numvfs < sriov_totalvfs.
2057 ret = mlx5_nl_switch_info
2061 if (ret || (!list[ns].info.representor &&
2062 !list[ns].info.master)) {
2064 * We failed to recognize representors with
2065 * Netlink, let's try to perform the task
2068 ret = mlx5_sysfs_switch_info
2072 if (!ret && (list[ns].info.representor ^
2073 list[ns].info.master))
2078 "unable to recognize master/representors"
2079 " on the IB device with multiple ports");
2086 * The existence of several matching entries (nd > 1) means
2087 * port representors have been instantiated. No existing Verbs
2088 * call nor sysfs entries can tell them apart, this can only
2089 * be done through Netlink calls assuming kernel drivers are
2090 * recent enough to support them.
2092 * In the event of identification failure through Netlink,
2093 * try again through sysfs, then:
2095 * 1. A single IB device matches (nd == 1) with single
2096 * port (np=0/1) and is not a representor, assume
2097 * no switch support.
2099 * 2. Otherwise no safe assumptions can be made;
2100 * complain louder and bail out.
2103 for (i = 0; i != nd; ++i) {
2104 memset(&list[ns].info, 0, sizeof(list[ns].info));
2105 list[ns].max_port = 1;
2106 list[ns].ibv_port = 1;
2107 list[ns].ibv_dev = ibv_match[i];
2108 list[ns].eth_dev = NULL;
2109 list[ns].pci_dev = pci_dev;
2110 list[ns].ifindex = 0;
2112 list[ns].ifindex = mlx5_nl_ifindex
2113 (nl_rdma, list[ns].ibv_dev->name, 1);
2114 if (!list[ns].ifindex) {
2115 char ifname[IF_NAMESIZE];
2118 * Netlink failed, it may happen with old
2119 * ib_core kernel driver (before 4.16).
2120 * We can assume there is old driver because
2121 * here we are processing single ports IB
2122 * devices. Let's try sysfs to retrieve
2123 * the ifindex. The method works for
2124 * master device only.
2128 * Multiple devices found, assume
2129 * representors, can not distinguish
2130 * master/representor and retrieve
2131 * ifindex via sysfs.
2135 ret = mlx5_get_master_ifname
2136 (ibv_match[i]->ibdev_path, &ifname);
2139 if_nametoindex(ifname);
2140 if (!list[ns].ifindex) {
2142 * No network interface index found
2143 * for the specified device, it means
2144 * there it is neither representor
2152 ret = mlx5_nl_switch_info
2156 if (ret || (!list[ns].info.representor &&
2157 !list[ns].info.master)) {
2159 * We failed to recognize representors with
2160 * Netlink, let's try to perform the task
2163 ret = mlx5_sysfs_switch_info
2167 if (!ret && (list[ns].info.representor ^
2168 list[ns].info.master)) {
2170 } else if ((nd == 1) &&
2171 !list[ns].info.representor &&
2172 !list[ns].info.master) {
2174 * Single IB device with
2175 * one physical port and
2176 * attached network device.
2177 * May be SRIOV is not enabled
2178 * or there is no representors.
2180 DRV_LOG(INFO, "no E-Switch support detected");
2187 "unable to recognize master/representors"
2188 " on the multiple IB devices");
2196 * Sort list to probe devices in natural order for users convenience
2197 * (i.e. master first, then representors from lowest to highest ID).
2199 qsort(list, ns, sizeof(*list), mlx5_dev_spawn_data_cmp);
2200 /* Default configuration. */
2201 dev_config = (struct mlx5_dev_config){
2203 .mps = MLX5_ARG_UNSET,
2205 .txq_inline_max = MLX5_ARG_UNSET,
2206 .txq_inline_min = MLX5_ARG_UNSET,
2207 .txq_inline_mpw = MLX5_ARG_UNSET,
2208 .txqs_inline = MLX5_ARG_UNSET,
2210 .mr_ext_memseg_en = 1,
2212 .enabled = 0, /* Disabled by default. */
2213 .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
2214 .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
2215 .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
2219 /* Device specific configuration. */
2220 switch (pci_dev->id.device_id) {
2221 case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
2222 case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
2223 case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
2224 case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
2230 for (i = 0; i != ns; ++i) {
2233 list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device,
2236 if (!list[i].eth_dev) {
2237 if (rte_errno != EBUSY && rte_errno != EEXIST)
2239 /* Device is disabled or already spawned. Ignore it. */
2242 restore = list[i].eth_dev->data->dev_flags;
2243 rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
2244 /* Restore non-PCI flags cleared by the above call. */
2245 list[i].eth_dev->data->dev_flags |= restore;
2246 rte_eth_dev_probing_finish(list[i].eth_dev);
2250 "probe of PCI device " PCI_PRI_FMT " aborted after"
2251 " encountering an error: %s",
2252 pci_dev->addr.domain, pci_dev->addr.bus,
2253 pci_dev->addr.devid, pci_dev->addr.function,
2254 strerror(rte_errno));
2258 if (!list[i].eth_dev)
2260 mlx5_dev_close(list[i].eth_dev);
2261 /* mac_addrs must not be freed because in dev_private */
2262 list[i].eth_dev->data->mac_addrs = NULL;
2263 claim_zero(rte_eth_dev_release_port(list[i].eth_dev));
2265 /* Restore original error. */
2272 * Do the routine cleanup:
2273 * - close opened Netlink sockets
2274 * - free the Infiniband device list
2281 mlx5_glue->free_device_list(ibv_list);
2286 * DPDK callback to remove a PCI device.
2288 * This function removes all Ethernet devices belong to a given PCI device.
2290 * @param[in] pci_dev
2291 * Pointer to the PCI device.
2294 * 0 on success, the function cannot fail.
2297 mlx5_pci_remove(struct rte_pci_device *pci_dev)
2301 RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device)
2302 rte_eth_dev_close(port_id);
2306 static const struct rte_pci_id mlx5_pci_id_map[] = {
2308 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2309 PCI_DEVICE_ID_MELLANOX_CONNECTX4)
2312 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2313 PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
2316 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2317 PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
2320 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2321 PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
2324 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2325 PCI_DEVICE_ID_MELLANOX_CONNECTX5)
2328 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2329 PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
2332 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2333 PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
2336 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2337 PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
2340 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2341 PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
2344 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2345 PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
2348 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2349 PCI_DEVICE_ID_MELLANOX_CONNECTX6)
2352 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2353 PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
2360 static struct rte_pci_driver mlx5_driver = {
2362 .name = MLX5_DRIVER_NAME
2364 .id_table = mlx5_pci_id_map,
2365 .probe = mlx5_pci_probe,
2366 .remove = mlx5_pci_remove,
2367 .dma_map = mlx5_dma_map,
2368 .dma_unmap = mlx5_dma_unmap,
2369 .drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV |
2370 RTE_PCI_DRV_PROBE_AGAIN,
2373 #ifdef RTE_IBVERBS_LINK_DLOPEN
2376 * Suffix RTE_EAL_PMD_PATH with "-glue".
2378 * This function performs a sanity check on RTE_EAL_PMD_PATH before
2379 * suffixing its last component.
2382 * Output buffer, should be large enough otherwise NULL is returned.
2387 * Pointer to @p buf or @p NULL in case suffix cannot be appended.
2390 mlx5_glue_path(char *buf, size_t size)
2392 static const char *const bad[] = { "/", ".", "..", NULL };
2393 const char *path = RTE_EAL_PMD_PATH;
2394 size_t len = strlen(path);
2398 while (len && path[len - 1] == '/')
2400 for (off = len; off && path[off - 1] != '/'; --off)
2402 for (i = 0; bad[i]; ++i)
2403 if (!strncmp(path + off, bad[i], (int)(len - off)))
2405 i = snprintf(buf, size, "%.*s-glue", (int)len, path);
2406 if (i == -1 || (size_t)i >= size)
2411 "unable to append \"-glue\" to last component of"
2412 " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
2413 " please re-configure DPDK");
2418 * Initialization routine for run-time dependency on rdma-core.
2421 mlx5_glue_init(void)
2423 char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
2424 const char *path[] = {
2426 * A basic security check is necessary before trusting
2427 * MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH.
2429 (geteuid() == getuid() && getegid() == getgid() ?
2430 getenv("MLX5_GLUE_PATH") : NULL),
2432 * When RTE_EAL_PMD_PATH is set, use its glue-suffixed
2433 * variant, otherwise let dlopen() look up libraries on its
2436 (*RTE_EAL_PMD_PATH ?
2437 mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
2440 void *handle = NULL;
2444 while (!handle && i != RTE_DIM(path)) {
2453 end = strpbrk(path[i], ":;");
2455 end = path[i] + strlen(path[i]);
2456 len = end - path[i];
2461 ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE,
2463 (!len || *(end - 1) == '/') ? "" : "/");
2466 if (sizeof(name) != (size_t)ret + 1)
2468 DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"",
2470 handle = dlopen(name, RTLD_LAZY);
2481 DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg);
2484 sym = dlsym(handle, "mlx5_glue");
2485 if (!sym || !*sym) {
2489 DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg);
2498 "cannot initialize PMD due to missing run-time dependency on"
2499 " rdma-core libraries (libibverbs, libmlx5)");
2506 * Driver initialization routine.
2508 RTE_INIT(rte_mlx5_pmd_init)
2510 /* Initialize driver log type. */
2511 mlx5_logtype = rte_log_register("pmd.net.mlx5");
2512 if (mlx5_logtype >= 0)
2513 rte_log_set_level(mlx5_logtype, RTE_LOG_NOTICE);
2515 /* Build the static tables for Verbs conversion. */
2516 mlx5_set_ptype_table();
2517 mlx5_set_cksum_table();
2518 mlx5_set_swp_types_table();
2520 * RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
2521 * huge pages. Calling ibv_fork_init() during init allows
2522 * applications to use fork() safely for purposes other than
2523 * using this PMD, which is not supported in forked processes.
2525 setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
2526 /* Match the size of Rx completion entry to the size of a cacheline. */
2527 if (RTE_CACHE_LINE_SIZE == 128)
2528 setenv("MLX5_CQE_SIZE", "128", 0);
2530 * MLX5_DEVICE_FATAL_CLEANUP tells ibv_destroy functions to
2531 * cleanup all the Verbs resources even when the device was removed.
2533 setenv("MLX5_DEVICE_FATAL_CLEANUP", "1", 1);
2534 #ifdef RTE_IBVERBS_LINK_DLOPEN
2535 if (mlx5_glue_init())
2540 /* Glue structure must not contain any NULL pointers. */
2544 for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i)
2545 assert(((const void *const *)mlx5_glue)[i]);
2548 if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
2550 "rdma-core glue \"%s\" mismatch: \"%s\" is required",
2551 mlx5_glue->version, MLX5_GLUE_VERSION);
2554 mlx5_glue->fork_init();
2555 rte_pci_register(&mlx5_driver);
2558 RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
2559 RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
2560 RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");