drivers/net/mlx5/mlx5.c

   1 /* SPDX-License-Identifier: BSD-3-Clause
   2  * Copyright 2015 6WIND S.A.
   3  * Copyright 2015 Mellanox Technologies, Ltd
   4  */
   5
   6 #include <stddef.h>
   7 #include <unistd.h>
   8 #include <string.h>
   9 #include <stdint.h>
  10 #include <stdlib.h>
  11 #include <errno.h>
  12
  13 #include <rte_malloc.h>
  14 #include <ethdev_driver.h>
  15 #include <rte_pci.h>
  16 #include <rte_bus_pci.h>
  17 #include <rte_common.h>
  18 #include <rte_kvargs.h>
  19 #include <rte_rwlock.h>
  20 #include <rte_spinlock.h>
  21 #include <rte_string_fns.h>
  22 #include <rte_eal_paging.h>
  23 #include <rte_alarm.h>
  24 #include <rte_cycles.h>
  25
  26 #include <mlx5_glue.h>
  27 #include <mlx5_devx_cmds.h>
  28 #include <mlx5_common.h>
  29 #include <mlx5_common_os.h>
  30 #include <mlx5_common_mp.h>
  31 #include <mlx5_malloc.h>
  32
  33 #include "mlx5_defs.h"
  34 #include "mlx5.h"
  35 #include "mlx5_utils.h"
  36 #include "mlx5_rxtx.h"
  37 #include "mlx5_rx.h"
  38 #include "mlx5_tx.h"
  39 #include "mlx5_autoconf.h"
  40 #include "mlx5_flow.h"
  41 #include "mlx5_flow_os.h"
  42 #include "rte_pmd_mlx5.h"
  43
  44 #define MLX5_ETH_DRIVER_NAME mlx5_eth
  45
  46 /* Device parameter to enable RX completion queue compression. */
  47 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
  48
  49 /* Device parameter to enable padding Rx packet to cacheline size. */
  50 #define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
  51
  52 /* Device parameter to enable Multi-Packet Rx queue. */
  53 #define MLX5_RX_MPRQ_EN "mprq_en"
  54
  55 /* Device parameter to configure log 2 of the number of strides for MPRQ. */
  56 #define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
  57
  58 /* Device parameter to configure log 2 of the stride size for MPRQ. */
  59 #define MLX5_RX_MPRQ_LOG_STRIDE_SIZE "mprq_log_stride_size"
  60
  61 /* Device parameter to limit the size of memcpy'd packet for MPRQ. */
  62 #define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
  63
  64 /* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
  65 #define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
  66
  67 /* Device parameter to configure inline send. Deprecated, ignored.*/
  68 #define MLX5_TXQ_INLINE "txq_inline"
  69
  70 /* Device parameter to limit packet size to inline with ordinary SEND. */
  71 #define MLX5_TXQ_INLINE_MAX "txq_inline_max"
  72
  73 /* Device parameter to configure minimal data size to inline. */
  74 #define MLX5_TXQ_INLINE_MIN "txq_inline_min"
  75
  76 /* Device parameter to limit packet size to inline with Enhanced MPW. */
  77 #define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
  78
  79 /*
  80  * Device parameter to configure the number of TX queues threshold for
  81  * enabling inline send.
  82  */
  83 #define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
  84
  85 /*
  86  * Device parameter to configure the number of TX queues threshold for
  87  * enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
  88  */
  89 #define MLX5_TXQS_MAX_VEC "txqs_max_vec"
  90
  91 /* Device parameter to enable multi-packet send WQEs. */
  92 #define MLX5_TXQ_MPW_EN "txq_mpw_en"
  93
  94 /*
  95  * Device parameter to include 2 dsegs in the title WQEBB.
  96  * Deprecated, ignored.
  97  */
  98 #define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
  99
 100 /*
 101  * Device parameter to limit the size of inlining packet.
 102  * Deprecated, ignored.
 103  */
 104 #define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
 105
 106 /*
 107  * Device parameter to enable Tx scheduling on timestamps
 108  * and specify the packet pacing granularity in nanoseconds.
 109  */
 110 #define MLX5_TX_PP "tx_pp"
 111
 112 /*
 113  * Device parameter to specify skew in nanoseconds on Tx datapath,
 114  * it represents the time between SQ start WQE processing and
 115  * appearing actual packet data on the wire.
 116  */
 117 #define MLX5_TX_SKEW "tx_skew"
 118
 119 /*
 120  * Device parameter to enable hardware Tx vector.
 121  * Deprecated, ignored (no vectorized Tx routines anymore).
 122  */
 123 #define MLX5_TX_VEC_EN "tx_vec_en"
 124
 125 /* Device parameter to enable hardware Rx vector. */
 126 #define MLX5_RX_VEC_EN "rx_vec_en"
 127
 128 /* Allow L3 VXLAN flow creation. */
 129 #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
 130
 131 /* Activate DV E-Switch flow steering. */
 132 #define MLX5_DV_ESW_EN "dv_esw_en"
 133
 134 /* Activate DV flow steering. */
 135 #define MLX5_DV_FLOW_EN "dv_flow_en"
 136
 137 /* Enable extensive flow metadata support. */
 138 #define MLX5_DV_XMETA_EN "dv_xmeta_en"
 139
 140 /* Device parameter to let the user manage the lacp traffic of bonded device */
 141 #define MLX5_LACP_BY_USER "lacp_by_user"
 142
 143 /* Activate Netlink support in VF mode. */
 144 #define MLX5_VF_NL_EN "vf_nl_en"
 145
 146 /* Select port representors to instantiate. */
 147 #define MLX5_REPRESENTOR "representor"
 148
 149 /* Device parameter to configure the maximum number of dump files per queue. */
 150 #define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
 151
 152 /* Configure timeout of LRO session (in microseconds). */
 153 #define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
 154
 155 /*
 156  * Device parameter to configure the total data buffer size for a single
 157  * hairpin queue (logarithm value).
 158  */
 159 #define MLX5_HP_BUF_SIZE "hp_buf_log_sz"
 160
 161 /* Flow memory reclaim mode. */
 162 #define MLX5_RECLAIM_MEM "reclaim_mem_mode"
 163
 164 /* Decap will be used or not. */
 165 #define MLX5_DECAP_EN "decap_en"
 166
 167 /* Device parameter to configure allow or prevent duplicate rules pattern. */
 168 #define MLX5_ALLOW_DUPLICATE_PATTERN "allow_duplicate_pattern"
 169
 170 /* Device parameter to configure the delay drop when creating Rxqs. */
 171 #define MLX5_DELAY_DROP "delay_drop"
 172
 173 /* Shared memory between primary and secondary processes. */
 174 struct mlx5_shared_data *mlx5_shared_data;
 175
 176 /** Driver-specific log messages type. */
 177 int mlx5_logtype;
 178
 179 static LIST_HEAD(, mlx5_dev_ctx_shared) mlx5_dev_ctx_list =
 180                                                 LIST_HEAD_INITIALIZER();
 181 static pthread_mutex_t mlx5_dev_ctx_list_mutex;
 182 static const struct mlx5_indexed_pool_config mlx5_ipool_cfg[] = {
 183 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
 184         [MLX5_IPOOL_DECAP_ENCAP] = {
 185                 .size = sizeof(struct mlx5_flow_dv_encap_decap_resource),
 186                 .trunk_size = 64,
 187                 .grow_trunk = 3,
 188                 .grow_shift = 2,
 189                 .need_lock = 1,
 190                 .release_mem_en = 1,
 191                 .malloc = mlx5_malloc,
 192                 .free = mlx5_free,
 193                 .type = "mlx5_encap_decap_ipool",
 194         },
 195         [MLX5_IPOOL_PUSH_VLAN] = {
 196                 .size = sizeof(struct mlx5_flow_dv_push_vlan_action_resource),
 197                 .trunk_size = 64,
 198                 .grow_trunk = 3,
 199                 .grow_shift = 2,
 200                 .need_lock = 1,
 201                 .release_mem_en = 1,
 202                 .malloc = mlx5_malloc,
 203                 .free = mlx5_free,
 204                 .type = "mlx5_push_vlan_ipool",
 205         },
 206         [MLX5_IPOOL_TAG] = {
 207                 .size = sizeof(struct mlx5_flow_dv_tag_resource),
 208                 .trunk_size = 64,
 209                 .grow_trunk = 3,
 210                 .grow_shift = 2,
 211                 .need_lock = 1,
 212                 .release_mem_en = 0,
 213                 .per_core_cache = (1 << 16),
 214                 .malloc = mlx5_malloc,
 215                 .free = mlx5_free,
 216                 .type = "mlx5_tag_ipool",
 217         },
 218         [MLX5_IPOOL_PORT_ID] = {
 219                 .size = sizeof(struct mlx5_flow_dv_port_id_action_resource),
 220                 .trunk_size = 64,
 221                 .grow_trunk = 3,
 222                 .grow_shift = 2,
 223                 .need_lock = 1,
 224                 .release_mem_en = 1,
 225                 .malloc = mlx5_malloc,
 226                 .free = mlx5_free,
 227                 .type = "mlx5_port_id_ipool",
 228         },
 229         [MLX5_IPOOL_JUMP] = {
 230                 .size = sizeof(struct mlx5_flow_tbl_data_entry),
 231                 .trunk_size = 64,
 232                 .grow_trunk = 3,
 233                 .grow_shift = 2,
 234                 .need_lock = 1,
 235                 .release_mem_en = 1,
 236                 .malloc = mlx5_malloc,
 237                 .free = mlx5_free,
 238                 .type = "mlx5_jump_ipool",
 239         },
 240         [MLX5_IPOOL_SAMPLE] = {
 241                 .size = sizeof(struct mlx5_flow_dv_sample_resource),
 242                 .trunk_size = 64,
 243                 .grow_trunk = 3,
 244                 .grow_shift = 2,
 245                 .need_lock = 1,
 246                 .release_mem_en = 1,
 247                 .malloc = mlx5_malloc,
 248                 .free = mlx5_free,
 249                 .type = "mlx5_sample_ipool",
 250         },
 251         [MLX5_IPOOL_DEST_ARRAY] = {
 252                 .size = sizeof(struct mlx5_flow_dv_dest_array_resource),
 253                 .trunk_size = 64,
 254                 .grow_trunk = 3,
 255                 .grow_shift = 2,
 256                 .need_lock = 1,
 257                 .release_mem_en = 1,
 258                 .malloc = mlx5_malloc,
 259                 .free = mlx5_free,
 260                 .type = "mlx5_dest_array_ipool",
 261         },
 262         [MLX5_IPOOL_TUNNEL_ID] = {
 263                 .size = sizeof(struct mlx5_flow_tunnel),
 264                 .trunk_size = MLX5_MAX_TUNNELS,
 265                 .need_lock = 1,
 266                 .release_mem_en = 1,
 267                 .type = "mlx5_tunnel_offload",
 268         },
 269         [MLX5_IPOOL_TNL_TBL_ID] = {
 270                 .size = 0,
 271                 .need_lock = 1,
 272                 .type = "mlx5_flow_tnl_tbl_ipool",
 273         },
 274 #endif
 275         [MLX5_IPOOL_MTR] = {
 276                 /**
 277                  * The ipool index should grow continually from small to big,
 278                  * for meter idx, so not set grow_trunk to avoid meter index
 279                  * not jump continually.
 280                  */
 281                 .size = sizeof(struct mlx5_legacy_flow_meter),
 282                 .trunk_size = 64,
 283                 .need_lock = 1,
 284                 .release_mem_en = 1,
 285                 .malloc = mlx5_malloc,
 286                 .free = mlx5_free,
 287                 .type = "mlx5_meter_ipool",
 288         },
 289         [MLX5_IPOOL_MCP] = {
 290                 .size = sizeof(struct mlx5_flow_mreg_copy_resource),
 291                 .trunk_size = 64,
 292                 .grow_trunk = 3,
 293                 .grow_shift = 2,
 294                 .need_lock = 1,
 295                 .release_mem_en = 1,
 296                 .malloc = mlx5_malloc,
 297                 .free = mlx5_free,
 298                 .type = "mlx5_mcp_ipool",
 299         },
 300         [MLX5_IPOOL_HRXQ] = {
 301                 .size = (sizeof(struct mlx5_hrxq) + MLX5_RSS_HASH_KEY_LEN),
 302                 .trunk_size = 64,
 303                 .grow_trunk = 3,
 304                 .grow_shift = 2,
 305                 .need_lock = 1,
 306                 .release_mem_en = 1,
 307                 .malloc = mlx5_malloc,
 308                 .free = mlx5_free,
 309                 .type = "mlx5_hrxq_ipool",
 310         },
 311         [MLX5_IPOOL_MLX5_FLOW] = {
 312                 /*
 313                  * MLX5_IPOOL_MLX5_FLOW size varies for DV and VERBS flows.
 314                  * It set in run time according to PCI function configuration.
 315                  */
 316                 .size = 0,
 317                 .trunk_size = 64,
 318                 .grow_trunk = 3,
 319                 .grow_shift = 2,
 320                 .need_lock = 1,
 321                 .release_mem_en = 0,
 322                 .per_core_cache = 1 << 19,
 323                 .malloc = mlx5_malloc,
 324                 .free = mlx5_free,
 325                 .type = "mlx5_flow_handle_ipool",
 326         },
 327         [MLX5_IPOOL_RTE_FLOW] = {
 328                 .size = sizeof(struct rte_flow),
 329                 .trunk_size = 4096,
 330                 .need_lock = 1,
 331                 .release_mem_en = 1,
 332                 .malloc = mlx5_malloc,
 333                 .free = mlx5_free,
 334                 .type = "rte_flow_ipool",
 335         },
 336         [MLX5_IPOOL_RSS_EXPANTION_FLOW_ID] = {
 337                 .size = 0,
 338                 .need_lock = 1,
 339                 .type = "mlx5_flow_rss_id_ipool",
 340         },
 341         [MLX5_IPOOL_RSS_SHARED_ACTIONS] = {
 342                 .size = sizeof(struct mlx5_shared_action_rss),
 343                 .trunk_size = 64,
 344                 .grow_trunk = 3,
 345                 .grow_shift = 2,
 346                 .need_lock = 1,
 347                 .release_mem_en = 1,
 348                 .malloc = mlx5_malloc,
 349                 .free = mlx5_free,
 350                 .type = "mlx5_shared_action_rss",
 351         },
 352         [MLX5_IPOOL_MTR_POLICY] = {
 353                 /**
 354                  * The ipool index should grow continually from small to big,
 355                  * for policy idx, so not set grow_trunk to avoid policy index
 356                  * not jump continually.
 357                  */
 358                 .size = sizeof(struct mlx5_flow_meter_sub_policy),
 359                 .trunk_size = 64,
 360                 .need_lock = 1,
 361                 .release_mem_en = 1,
 362                 .malloc = mlx5_malloc,
 363                 .free = mlx5_free,
 364                 .type = "mlx5_meter_policy_ipool",
 365         },
 366 };
 367
 368 #define MLX5_FLOW_MIN_ID_POOL_SIZE 512
 369 #define MLX5_ID_GENERATION_ARRAY_FACTOR 16
 370
 371 #define MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE 1024
 372
 373 /**
 374  * Decide whether representor ID is a HPF(host PF) port on BF2.
 375  *
 376  * @param dev
 377  *   Pointer to Ethernet device structure.
 378  *
 379  * @return
 380  *   Non-zero if HPF, otherwise 0.
 381  */
 382 bool
 383 mlx5_is_hpf(struct rte_eth_dev *dev)
 384 {
 385         struct mlx5_priv *priv = dev->data->dev_private;
 386         uint16_t repr = MLX5_REPRESENTOR_REPR(priv->representor_id);
 387         int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
 388
 389         return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_VF &&
 390                MLX5_REPRESENTOR_REPR(-1) == repr;
 391 }
 392
 393 /**
 394  * Decide whether representor ID is a SF port representor.
 395  *
 396  * @param dev
 397  *   Pointer to Ethernet device structure.
 398  *
 399  * @return
 400  *   Non-zero if HPF, otherwise 0.
 401  */
 402 bool
 403 mlx5_is_sf_repr(struct rte_eth_dev *dev)
 404 {
 405         struct mlx5_priv *priv = dev->data->dev_private;
 406         int type = MLX5_REPRESENTOR_TYPE(priv->representor_id);
 407
 408         return priv->representor != 0 && type == RTE_ETH_REPRESENTOR_SF;
 409 }
 410
 411 /**
 412  * Initialize the ASO aging management structure.
 413  *
 414  * @param[in] sh
 415  *   Pointer to mlx5_dev_ctx_shared object to free
 416  *
 417  * @return
 418  *   0 on success, a negative errno value otherwise and rte_errno is set.
 419  */
 420 int
 421 mlx5_flow_aso_age_mng_init(struct mlx5_dev_ctx_shared *sh)
 422 {
 423         int err;
 424
 425         if (sh->aso_age_mng)
 426                 return 0;
 427         sh->aso_age_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->aso_age_mng),
 428                                       RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
 429         if (!sh->aso_age_mng) {
 430                 DRV_LOG(ERR, "aso_age_mng allocation was failed.");
 431                 rte_errno = ENOMEM;
 432                 return -ENOMEM;
 433         }
 434         err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_FLOW_HIT);
 435         if (err) {
 436                 mlx5_free(sh->aso_age_mng);
 437                 return -1;
 438         }
 439         rte_rwlock_init(&sh->aso_age_mng->resize_rwl);
 440         rte_spinlock_init(&sh->aso_age_mng->free_sl);
 441         LIST_INIT(&sh->aso_age_mng->free);
 442         return 0;
 443 }
 444
 445 /**
 446  * Close and release all the resources of the ASO aging management structure.
 447  *
 448  * @param[in] sh
 449  *   Pointer to mlx5_dev_ctx_shared object to free.
 450  */
 451 static void
 452 mlx5_flow_aso_age_mng_close(struct mlx5_dev_ctx_shared *sh)
 453 {
 454         int i, j;
 455
 456         mlx5_aso_flow_hit_queue_poll_stop(sh);
 457         mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_FLOW_HIT);
 458         if (sh->aso_age_mng->pools) {
 459                 struct mlx5_aso_age_pool *pool;
 460
 461                 for (i = 0; i < sh->aso_age_mng->next; ++i) {
 462                         pool = sh->aso_age_mng->pools[i];
 463                         claim_zero(mlx5_devx_cmd_destroy
 464                                                 (pool->flow_hit_aso_obj));
 465                         for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j)
 466                                 if (pool->actions[j].dr_action)
 467                                         claim_zero
 468                                             (mlx5_flow_os_destroy_flow_action
 469                                               (pool->actions[j].dr_action));
 470                         mlx5_free(pool);
 471                 }
 472                 mlx5_free(sh->aso_age_mng->pools);
 473         }
 474         mlx5_free(sh->aso_age_mng);
 475 }
 476
 477 /**
 478  * Initialize the shared aging list information per port.
 479  *
 480  * @param[in] sh
 481  *   Pointer to mlx5_dev_ctx_shared object.
 482  */
 483 static void
 484 mlx5_flow_aging_init(struct mlx5_dev_ctx_shared *sh)
 485 {
 486         uint32_t i;
 487         struct mlx5_age_info *age_info;
 488
 489         for (i = 0; i < sh->max_port; i++) {
 490                 age_info = &sh->port[i].age_info;
 491                 age_info->flags = 0;
 492                 TAILQ_INIT(&age_info->aged_counters);
 493                 LIST_INIT(&age_info->aged_aso);
 494                 rte_spinlock_init(&age_info->aged_sl);
 495                 MLX5_AGE_SET(age_info, MLX5_AGE_TRIGGER);
 496         }
 497 }
 498
 499 /**
 500  * DV flow counter mode detect and config.
 501  *
 502  * @param dev
 503  *   Pointer to rte_eth_dev structure.
 504  *
 505  */
 506 void
 507 mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
 508 {
 509 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
 510         struct mlx5_priv *priv = dev->data->dev_private;
 511         struct mlx5_dev_ctx_shared *sh = priv->sh;
 512         struct mlx5_hca_attr *hca_attr = &sh->cdev->config.hca_attr;
 513         bool fallback;
 514
 515 #ifndef HAVE_IBV_DEVX_ASYNC
 516         fallback = true;
 517 #else
 518         fallback = false;
 519         if (!sh->cdev->config.devx || !sh->config.dv_flow_en ||
 520             !hca_attr->flow_counters_dump ||
 521             !(hca_attr->flow_counter_bulk_alloc_bitmap & 0x4) ||
 522             (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
 523                 fallback = true;
 524 #endif
 525         if (fallback)
 526                 DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
 527                         "counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
 528                         hca_attr->flow_counters_dump,
 529                         hca_attr->flow_counter_bulk_alloc_bitmap);
 530         /* Initialize fallback mode only on the port initializes sh. */
 531         if (sh->refcnt == 1)
 532                 sh->cmng.counter_fallback = fallback;
 533         else if (fallback != sh->cmng.counter_fallback)
 534                 DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
 535                         "with others:%d.", PORT_ID(priv), fallback);
 536 #endif
 537 }
 538
 539 /**
 540  * Initialize the counters management structure.
 541  *
 542  * @param[in] sh
 543  *   Pointer to mlx5_dev_ctx_shared object to free
 544  */
 545 static void
 546 mlx5_flow_counters_mng_init(struct mlx5_dev_ctx_shared *sh)
 547 {
 548         int i;
 549
 550         memset(&sh->cmng, 0, sizeof(sh->cmng));
 551         TAILQ_INIT(&sh->cmng.flow_counters);
 552         sh->cmng.min_id = MLX5_CNT_BATCH_OFFSET;
 553         sh->cmng.max_id = -1;
 554         sh->cmng.last_pool_idx = POOL_IDX_INVALID;
 555         rte_spinlock_init(&sh->cmng.pool_update_sl);
 556         for (i = 0; i < MLX5_COUNTER_TYPE_MAX; i++) {
 557                 TAILQ_INIT(&sh->cmng.counters[i]);
 558                 rte_spinlock_init(&sh->cmng.csl[i]);
 559         }
 560 }
 561
 562 /**
 563  * Destroy all the resources allocated for a counter memory management.
 564  *
 565  * @param[in] mng
 566  *   Pointer to the memory management structure.
 567  */
 568 static void
 569 mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
 570 {
 571         uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
 572
 573         LIST_REMOVE(mng, next);
 574         mlx5_os_wrapped_mkey_destroy(&mng->wm);
 575         mlx5_free(mem);
 576 }
 577
 578 /**
 579  * Close and release all the resources of the counters management.
 580  *
 581  * @param[in] sh
 582  *   Pointer to mlx5_dev_ctx_shared object to free.
 583  */
 584 static void
 585 mlx5_flow_counters_mng_close(struct mlx5_dev_ctx_shared *sh)
 586 {
 587         struct mlx5_counter_stats_mem_mng *mng;
 588         int i, j;
 589         int retries = 1024;
 590
 591         rte_errno = 0;
 592         while (--retries) {
 593                 rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
 594                 if (rte_errno != EINPROGRESS)
 595                         break;
 596                 rte_pause();
 597         }
 598
 599         if (sh->cmng.pools) {
 600                 struct mlx5_flow_counter_pool *pool;
 601                 uint16_t n_valid = sh->cmng.n_valid;
 602                 bool fallback = sh->cmng.counter_fallback;
 603
 604                 for (i = 0; i < n_valid; ++i) {
 605                         pool = sh->cmng.pools[i];
 606                         if (!fallback && pool->min_dcs)
 607                                 claim_zero(mlx5_devx_cmd_destroy
 608                                                                (pool->min_dcs));
 609                         for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
 610                                 struct mlx5_flow_counter *cnt =
 611                                                 MLX5_POOL_GET_CNT(pool, j);
 612
 613                                 if (cnt->action)
 614                                         claim_zero
 615                                          (mlx5_flow_os_destroy_flow_action
 616                                           (cnt->action));
 617                                 if (fallback && MLX5_POOL_GET_CNT
 618                                     (pool, j)->dcs_when_free)
 619                                         claim_zero(mlx5_devx_cmd_destroy
 620                                                    (cnt->dcs_when_free));
 621                         }
 622                         mlx5_free(pool);
 623                 }
 624                 mlx5_free(sh->cmng.pools);
 625         }
 626         mng = LIST_FIRST(&sh->cmng.mem_mngs);
 627         while (mng) {
 628                 mlx5_flow_destroy_counter_stat_mem_mng(mng);
 629                 mng = LIST_FIRST(&sh->cmng.mem_mngs);
 630         }
 631         memset(&sh->cmng, 0, sizeof(sh->cmng));
 632 }
 633
 634 /**
 635  * Initialize the aso flow meters management structure.
 636  *
 637  * @param[in] sh
 638  *   Pointer to mlx5_dev_ctx_shared object to free
 639  */
 640 int
 641 mlx5_aso_flow_mtrs_mng_init(struct mlx5_dev_ctx_shared *sh)
 642 {
 643         if (!sh->mtrmng) {
 644                 sh->mtrmng = mlx5_malloc(MLX5_MEM_ZERO,
 645                         sizeof(*sh->mtrmng),
 646                         RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
 647                 if (!sh->mtrmng) {
 648                         DRV_LOG(ERR,
 649                         "meter management allocation was failed.");
 650                         rte_errno = ENOMEM;
 651                         return -ENOMEM;
 652                 }
 653                 if (sh->meter_aso_en) {
 654                         rte_spinlock_init(&sh->mtrmng->pools_mng.mtrsl);
 655                         rte_rwlock_init(&sh->mtrmng->pools_mng.resize_mtrwl);
 656                         LIST_INIT(&sh->mtrmng->pools_mng.meters);
 657                 }
 658                 sh->mtrmng->def_policy_id = MLX5_INVALID_POLICY_ID;
 659         }
 660         return 0;
 661 }
 662
 663 /**
 664  * Close and release all the resources of
 665  * the ASO flow meter management structure.
 666  *
 667  * @param[in] sh
 668  *   Pointer to mlx5_dev_ctx_shared object to free.
 669  */
 670 static void
 671 mlx5_aso_flow_mtrs_mng_close(struct mlx5_dev_ctx_shared *sh)
 672 {
 673         struct mlx5_aso_mtr_pool *mtr_pool;
 674         struct mlx5_flow_mtr_mng *mtrmng = sh->mtrmng;
 675         uint32_t idx;
 676 #ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
 677         struct mlx5_aso_mtr *aso_mtr;
 678         int i;
 679 #endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
 680
 681         if (sh->meter_aso_en) {
 682                 mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_POLICER);
 683                 idx = mtrmng->pools_mng.n_valid;
 684                 while (idx--) {
 685                         mtr_pool = mtrmng->pools_mng.pools[idx];
 686 #ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
 687                         for (i = 0; i < MLX5_ASO_MTRS_PER_POOL; i++) {
 688                                 aso_mtr = &mtr_pool->mtrs[i];
 689                                 if (aso_mtr->fm.meter_action)
 690                                         claim_zero
 691                                         (mlx5_glue->destroy_flow_action
 692                                         (aso_mtr->fm.meter_action));
 693                         }
 694 #endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
 695                         claim_zero(mlx5_devx_cmd_destroy
 696                                                 (mtr_pool->devx_obj));
 697                         mtrmng->pools_mng.n_valid--;
 698                         mlx5_free(mtr_pool);
 699                 }
 700                 mlx5_free(sh->mtrmng->pools_mng.pools);
 701         }
 702         mlx5_free(sh->mtrmng);
 703         sh->mtrmng = NULL;
 704 }
 705
 706 /* Send FLOW_AGED event if needed. */
 707 void
 708 mlx5_age_event_prepare(struct mlx5_dev_ctx_shared *sh)
 709 {
 710         struct mlx5_age_info *age_info;
 711         uint32_t i;
 712
 713         for (i = 0; i < sh->max_port; i++) {
 714                 age_info = &sh->port[i].age_info;
 715                 if (!MLX5_AGE_GET(age_info, MLX5_AGE_EVENT_NEW))
 716                         continue;
 717                 MLX5_AGE_UNSET(age_info, MLX5_AGE_EVENT_NEW);
 718                 if (MLX5_AGE_GET(age_info, MLX5_AGE_TRIGGER)) {
 719                         MLX5_AGE_UNSET(age_info, MLX5_AGE_TRIGGER);
 720                         rte_eth_dev_callback_process
 721                                 (&rte_eth_devices[sh->port[i].devx_ih_port_id],
 722                                 RTE_ETH_EVENT_FLOW_AGED, NULL);
 723                 }
 724         }
 725 }
 726
 727 /*
 728  * Initialize the ASO connection tracking structure.
 729  *
 730  * @param[in] sh
 731  *   Pointer to mlx5_dev_ctx_shared object.
 732  *
 733  * @return
 734  *   0 on success, a negative errno value otherwise and rte_errno is set.
 735  */
 736 int
 737 mlx5_flow_aso_ct_mng_init(struct mlx5_dev_ctx_shared *sh)
 738 {
 739         int err;
 740
 741         if (sh->ct_mng)
 742                 return 0;
 743         sh->ct_mng = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sh->ct_mng),
 744                                  RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
 745         if (!sh->ct_mng) {
 746                 DRV_LOG(ERR, "ASO CT management allocation failed.");
 747                 rte_errno = ENOMEM;
 748                 return -rte_errno;
 749         }
 750         err = mlx5_aso_queue_init(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
 751         if (err) {
 752                 mlx5_free(sh->ct_mng);
 753                 /* rte_errno should be extracted from the failure. */
 754                 rte_errno = EINVAL;
 755                 return -rte_errno;
 756         }
 757         rte_spinlock_init(&sh->ct_mng->ct_sl);
 758         rte_rwlock_init(&sh->ct_mng->resize_rwl);
 759         LIST_INIT(&sh->ct_mng->free_cts);
 760         return 0;
 761 }
 762
 763 /*
 764  * Close and release all the resources of the
 765  * ASO connection tracking management structure.
 766  *
 767  * @param[in] sh
 768  *   Pointer to mlx5_dev_ctx_shared object to free.
 769  */
 770 static void
 771 mlx5_flow_aso_ct_mng_close(struct mlx5_dev_ctx_shared *sh)
 772 {
 773         struct mlx5_aso_ct_pools_mng *mng = sh->ct_mng;
 774         struct mlx5_aso_ct_pool *ct_pool;
 775         struct mlx5_aso_ct_action *ct;
 776         uint32_t idx;
 777         uint32_t val;
 778         uint32_t cnt;
 779         int i;
 780
 781         mlx5_aso_queue_uninit(sh, ASO_OPC_MOD_CONNECTION_TRACKING);
 782         idx = mng->next;
 783         while (idx--) {
 784                 cnt = 0;
 785                 ct_pool = mng->pools[idx];
 786                 for (i = 0; i < MLX5_ASO_CT_ACTIONS_PER_POOL; i++) {
 787                         ct = &ct_pool->actions[i];
 788                         val = __atomic_fetch_sub(&ct->refcnt, 1,
 789                                                  __ATOMIC_RELAXED);
 790                         MLX5_ASSERT(val == 1);
 791                         if (val > 1)
 792                                 cnt++;
 793 #ifdef HAVE_MLX5_DR_ACTION_ASO_CT
 794                         if (ct->dr_action_orig)
 795                                 claim_zero(mlx5_glue->destroy_flow_action
 796                                                         (ct->dr_action_orig));
 797                         if (ct->dr_action_rply)
 798                                 claim_zero(mlx5_glue->destroy_flow_action
 799                                                         (ct->dr_action_rply));
 800 #endif
 801                 }
 802                 claim_zero(mlx5_devx_cmd_destroy(ct_pool->devx_obj));
 803                 if (cnt) {
 804                         DRV_LOG(DEBUG, "%u ASO CT objects are being used in the pool %u",
 805                                 cnt, i);
 806                 }
 807                 mlx5_free(ct_pool);
 808                 /* in case of failure. */
 809                 mng->next--;
 810         }
 811         mlx5_free(mng->pools);
 812         mlx5_free(mng);
 813         /* Management structure must be cleared to 0s during allocation. */
 814         sh->ct_mng = NULL;
 815 }
 816
 817 /**
 818  * Initialize the flow resources' indexed mempool.
 819  *
 820  * @param[in] sh
 821  *   Pointer to mlx5_dev_ctx_shared object.
 822  */
 823 static void
 824 mlx5_flow_ipool_create(struct mlx5_dev_ctx_shared *sh)
 825 {
 826         uint8_t i;
 827         struct mlx5_indexed_pool_config cfg;
 828
 829         for (i = 0; i < MLX5_IPOOL_MAX; ++i) {
 830                 cfg = mlx5_ipool_cfg[i];
 831                 switch (i) {
 832                 default:
 833                         break;
 834                 /*
 835                  * Set MLX5_IPOOL_MLX5_FLOW ipool size
 836                  * according to PCI function flow configuration.
 837                  */
 838                 case MLX5_IPOOL_MLX5_FLOW:
 839                         cfg.size = sh->config.dv_flow_en ?
 840                                 sizeof(struct mlx5_flow_handle) :
 841                                 MLX5_FLOW_HANDLE_VERBS_SIZE;
 842                         break;
 843                 }
 844                 if (sh->config.reclaim_mode) {
 845                         cfg.release_mem_en = 1;
 846                         cfg.per_core_cache = 0;
 847                 } else {
 848                         cfg.release_mem_en = 0;
 849                 }
 850                 sh->ipool[i] = mlx5_ipool_create(&cfg);
 851         }
 852 }
 853
 854
 855 /**
 856  * Release the flow resources' indexed mempool.
 857  *
 858  * @param[in] sh
 859  *   Pointer to mlx5_dev_ctx_shared object.
 860  */
 861 static void
 862 mlx5_flow_ipool_destroy(struct mlx5_dev_ctx_shared *sh)
 863 {
 864         uint8_t i;
 865
 866         for (i = 0; i < MLX5_IPOOL_MAX; ++i)
 867                 mlx5_ipool_destroy(sh->ipool[i]);
 868         for (i = 0; i < MLX5_MAX_MODIFY_NUM; ++i)
 869                 if (sh->mdh_ipools[i])
 870                         mlx5_ipool_destroy(sh->mdh_ipools[i]);
 871 }
 872
 873 /*
 874  * Check if dynamic flex parser for eCPRI already exists.
 875  *
 876  * @param dev
 877  *   Pointer to Ethernet device structure.
 878  *
 879  * @return
 880  *   true on exists, false on not.
 881  */
 882 bool
 883 mlx5_flex_parser_ecpri_exist(struct rte_eth_dev *dev)
 884 {
 885         struct mlx5_priv *priv = dev->data->dev_private;
 886         struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
 887
 888         return !!prf->obj;
 889 }
 890
 891 /*
 892  * Allocation of a flex parser for eCPRI. Once created, this parser related
 893  * resources will be held until the device is closed.
 894  *
 895  * @param dev
 896  *   Pointer to Ethernet device structure.
 897  *
 898  * @return
 899  *   0 on success, a negative errno value otherwise and rte_errno is set.
 900  */
 901 int
 902 mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
 903 {
 904         struct mlx5_priv *priv = dev->data->dev_private;
 905         struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
 906         struct mlx5_devx_graph_node_attr node = {
 907                 .modify_field_select = 0,
 908         };
 909         uint32_t ids[8];
 910         int ret;
 911
 912         if (!priv->sh->cdev->config.hca_attr.parse_graph_flex_node) {
 913                 DRV_LOG(ERR, "Dynamic flex parser is not supported "
 914                         "for device %s.", priv->dev_data->name);
 915                 return -ENOTSUP;
 916         }
 917         node.header_length_mode = MLX5_GRAPH_NODE_LEN_FIXED;
 918         /* 8 bytes now: 4B common header + 4B message body header. */
 919         node.header_length_base_value = 0x8;
 920         /* After MAC layer: Ether / VLAN. */
 921         node.in[0].arc_parse_graph_node = MLX5_GRAPH_ARC_NODE_MAC;
 922         /* Type of compared condition should be 0xAEFE in the L2 layer. */
 923         node.in[0].compare_condition_value = RTE_ETHER_TYPE_ECPRI;
 924         /* Sample #0: type in common header. */
 925         node.sample[0].flow_match_sample_en = 1;
 926         /* Fixed offset. */
 927         node.sample[0].flow_match_sample_offset_mode = 0x0;
 928         /* Only the 2nd byte will be used. */
 929         node.sample[0].flow_match_sample_field_base_offset = 0x0;
 930         /* Sample #1: message payload. */
 931         node.sample[1].flow_match_sample_en = 1;
 932         /* Fixed offset. */
 933         node.sample[1].flow_match_sample_offset_mode = 0x0;
 934         /*
 935          * Only the first two bytes will be used right now, and its offset will
 936          * start after the common header that with the length of a DW(u32).
 937          */
 938         node.sample[1].flow_match_sample_field_base_offset = sizeof(uint32_t);
 939         prf->obj = mlx5_devx_cmd_create_flex_parser(priv->sh->cdev->ctx, &node);
 940         if (!prf->obj) {
 941                 DRV_LOG(ERR, "Failed to create flex parser node object.");
 942                 return (rte_errno == 0) ? -ENODEV : -rte_errno;
 943         }
 944         prf->num = 2;
 945         ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num);
 946         if (ret) {
 947                 DRV_LOG(ERR, "Failed to query sample IDs.");
 948                 return (rte_errno == 0) ? -ENODEV : -rte_errno;
 949         }
 950         prf->offset[0] = 0x0;
 951         prf->offset[1] = sizeof(uint32_t);
 952         prf->ids[0] = ids[0];
 953         prf->ids[1] = ids[1];
 954         return 0;
 955 }
 956
 957 /*
 958  * Destroy the flex parser node, including the parser itself, input / output
 959  * arcs and DW samples. Resources could be reused then.
 960  *
 961  * @param dev
 962  *   Pointer to Ethernet device structure.
 963  */
 964 static void
 965 mlx5_flex_parser_ecpri_release(struct rte_eth_dev *dev)
 966 {
 967         struct mlx5_priv *priv = dev->data->dev_private;
 968         struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
 969
 970         if (prf->obj)
 971                 mlx5_devx_cmd_destroy(prf->obj);
 972         prf->obj = NULL;
 973 }
 974
 975 uint32_t
 976 mlx5_get_supported_sw_parsing_offloads(const struct mlx5_hca_attr *attr)
 977 {
 978         uint32_t sw_parsing_offloads = 0;
 979
 980         if (attr->swp) {
 981                 sw_parsing_offloads |= MLX5_SW_PARSING_CAP;
 982                 if (attr->swp_csum)
 983                         sw_parsing_offloads |= MLX5_SW_PARSING_CSUM_CAP;
 984
 985                 if (attr->swp_lso)
 986                         sw_parsing_offloads |= MLX5_SW_PARSING_TSO_CAP;
 987         }
 988         return sw_parsing_offloads;
 989 }
 990
 991 uint32_t
 992 mlx5_get_supported_tunneling_offloads(const struct mlx5_hca_attr *attr)
 993 {
 994         uint32_t tn_offloads = 0;
 995
 996         if (attr->tunnel_stateless_vxlan)
 997                 tn_offloads |= MLX5_TUNNELED_OFFLOADS_VXLAN_CAP;
 998         if (attr->tunnel_stateless_gre)
 999                 tn_offloads |= MLX5_TUNNELED_OFFLOADS_GRE_CAP;
1000         if (attr->tunnel_stateless_geneve_rx)
1001                 tn_offloads |= MLX5_TUNNELED_OFFLOADS_GENEVE_CAP;
1002         return tn_offloads;
1003 }
1004
1005 /* Fill all fields of UAR structure. */
1006 static int
1007 mlx5_rxtx_uars_prepare(struct mlx5_dev_ctx_shared *sh)
1008 {
1009         int ret;
1010
1011         ret = mlx5_devx_uar_prepare(sh->cdev, &sh->tx_uar);
1012         if (ret) {
1013                 DRV_LOG(ERR, "Failed to prepare Tx DevX UAR.");
1014                 return -rte_errno;
1015         }
1016         MLX5_ASSERT(sh->tx_uar.obj);
1017         MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->tx_uar.obj));
1018         ret = mlx5_devx_uar_prepare(sh->cdev, &sh->rx_uar);
1019         if (ret) {
1020                 DRV_LOG(ERR, "Failed to prepare Rx DevX UAR.");
1021                 mlx5_devx_uar_release(&sh->tx_uar);
1022                 return -rte_errno;
1023         }
1024         MLX5_ASSERT(sh->rx_uar.obj);
1025         MLX5_ASSERT(mlx5_os_get_devx_uar_base_addr(sh->rx_uar.obj));
1026         return 0;
1027 }
1028
1029 static void
1030 mlx5_rxtx_uars_release(struct mlx5_dev_ctx_shared *sh)
1031 {
1032         mlx5_devx_uar_release(&sh->rx_uar);
1033         mlx5_devx_uar_release(&sh->tx_uar);
1034 }
1035
1036 /**
1037  * rte_mempool_walk() callback to unregister Rx mempools.
1038  * It used when implicit mempool registration is disabled.
1039  *
1040  * @param mp
1041  *   The mempool being walked.
1042  * @param arg
1043  *   Pointer to the device shared context.
1044  */
1045 static void
1046 mlx5_dev_ctx_shared_rx_mempool_unregister_cb(struct rte_mempool *mp, void *arg)
1047 {
1048         struct mlx5_dev_ctx_shared *sh = arg;
1049
1050         mlx5_dev_mempool_unregister(sh->cdev, mp);
1051 }
1052
1053 /**
1054  * Callback used when implicit mempool registration is disabled
1055  * in order to track Rx mempool destruction.
1056  *
1057  * @param event
1058  *   Mempool life cycle event.
1059  * @param mp
1060  *   An Rx mempool registered explicitly when the port is started.
1061  * @param arg
1062  *   Pointer to a device shared context.
1063  */
1064 static void
1065 mlx5_dev_ctx_shared_rx_mempool_event_cb(enum rte_mempool_event event,
1066                                         struct rte_mempool *mp, void *arg)
1067 {
1068         struct mlx5_dev_ctx_shared *sh = arg;
1069
1070         if (event == RTE_MEMPOOL_EVENT_DESTROY)
1071                 mlx5_dev_mempool_unregister(sh->cdev, mp);
1072 }
1073
1074 int
1075 mlx5_dev_ctx_shared_mempool_subscribe(struct rte_eth_dev *dev)
1076 {
1077         struct mlx5_priv *priv = dev->data->dev_private;
1078         struct mlx5_dev_ctx_shared *sh = priv->sh;
1079         int ret;
1080
1081         /* Check if we only need to track Rx mempool destruction. */
1082         if (!sh->cdev->config.mr_mempool_reg_en) {
1083                 ret = rte_mempool_event_callback_register
1084                                 (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
1085                 return ret == 0 || rte_errno == EEXIST ? 0 : ret;
1086         }
1087         return mlx5_dev_mempool_subscribe(sh->cdev);
1088 }
1089
1090 /**
1091  * Set up multiple TISs with different affinities according to
1092  * number of bonding ports
1093  *
1094  * @param priv
1095  * Pointer of shared context.
1096  *
1097  * @return
1098  * Zero on success, -1 otherwise.
1099  */
1100 static int
1101 mlx5_setup_tis(struct mlx5_dev_ctx_shared *sh)
1102 {
1103         int i;
1104         struct mlx5_devx_lag_context lag_ctx = { 0 };
1105         struct mlx5_devx_tis_attr tis_attr = { 0 };
1106
1107         tis_attr.transport_domain = sh->td->id;
1108         if (sh->bond.n_port) {
1109                 if (!mlx5_devx_cmd_query_lag(sh->cdev->ctx, &lag_ctx)) {
1110                         sh->lag.tx_remap_affinity[0] =
1111                                 lag_ctx.tx_remap_affinity_1;
1112                         sh->lag.tx_remap_affinity[1] =
1113                                 lag_ctx.tx_remap_affinity_2;
1114                         sh->lag.affinity_mode = lag_ctx.port_select_mode;
1115                 } else {
1116                         DRV_LOG(ERR, "Failed to query lag affinity.");
1117                         return -1;
1118                 }
1119                 if (sh->lag.affinity_mode == MLX5_LAG_MODE_TIS) {
1120                         for (i = 0; i < sh->bond.n_port; i++) {
1121                                 tis_attr.lag_tx_port_affinity =
1122                                         MLX5_IFC_LAG_MAP_TIS_AFFINITY(i,
1123                                                         sh->bond.n_port);
1124                                 sh->tis[i] = mlx5_devx_cmd_create_tis(sh->cdev->ctx,
1125                                                 &tis_attr);
1126                                 if (!sh->tis[i]) {
1127                                         DRV_LOG(ERR, "Failed to TIS %d/%d for bonding device"
1128                                                 " %s.", i, sh->bond.n_port,
1129                                                 sh->ibdev_name);
1130                                         return -1;
1131                                 }
1132                         }
1133                         DRV_LOG(DEBUG, "LAG number of ports : %d, affinity_1 & 2 : pf%d & %d.\n",
1134                                 sh->bond.n_port, lag_ctx.tx_remap_affinity_1,
1135                                 lag_ctx.tx_remap_affinity_2);
1136                         return 0;
1137                 }
1138                 if (sh->lag.affinity_mode == MLX5_LAG_MODE_HASH)
1139                         DRV_LOG(INFO, "Device %s enabled HW hash based LAG.",
1140                                         sh->ibdev_name);
1141         }
1142         tis_attr.lag_tx_port_affinity = 0;
1143         sh->tis[0] = mlx5_devx_cmd_create_tis(sh->cdev->ctx, &tis_attr);
1144         if (!sh->tis[0]) {
1145                 DRV_LOG(ERR, "Failed to TIS 0 for bonding device"
1146                         " %s.", sh->ibdev_name);
1147                 return -1;
1148         }
1149         return 0;
1150 }
1151
1152 /**
1153  * Verify and store value for share device argument.
1154  *
1155  * @param[in] key
1156  *   Key argument to verify.
1157  * @param[in] val
1158  *   Value associated with key.
1159  * @param opaque
1160  *   User data.
1161  *
1162  * @return
1163  *   0 on success, a negative errno value otherwise and rte_errno is set.
1164  */
1165 static int
1166 mlx5_dev_args_check_handler(const char *key, const char *val, void *opaque)
1167 {
1168         struct mlx5_sh_config *config = opaque;
1169         signed long tmp;
1170
1171         errno = 0;
1172         tmp = strtol(val, NULL, 0);
1173         if (errno) {
1174                 rte_errno = errno;
1175                 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
1176                 return -rte_errno;
1177         }
1178         if (tmp < 0 && strcmp(MLX5_TX_PP, key) && strcmp(MLX5_TX_SKEW, key)) {
1179                 /* Negative values are acceptable for some keys only. */
1180                 rte_errno = EINVAL;
1181                 DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
1182                 return -rte_errno;
1183         }
1184         if (strcmp(MLX5_TX_PP, key) == 0) {
1185                 unsigned long mod = tmp >= 0 ? tmp : -tmp;
1186
1187                 if (!mod) {
1188                         DRV_LOG(ERR, "Zero Tx packet pacing parameter.");
1189                         rte_errno = EINVAL;
1190                         return -rte_errno;
1191                 }
1192                 config->tx_pp = tmp;
1193         } else if (strcmp(MLX5_TX_SKEW, key) == 0) {
1194                 config->tx_skew = tmp;
1195         } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
1196                 config->l3_vxlan_en = !!tmp;
1197         } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
1198                 config->vf_nl_en = !!tmp;
1199         } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
1200                 config->dv_esw_en = !!tmp;
1201         } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
1202                 if (tmp > 2) {
1203                         DRV_LOG(ERR, "Invalid %s parameter.", key);
1204                         rte_errno = EINVAL;
1205                         return -rte_errno;
1206                 }
1207                 config->dv_flow_en = tmp;
1208         } else if (strcmp(MLX5_DV_XMETA_EN, key) == 0) {
1209                 if (tmp != MLX5_XMETA_MODE_LEGACY &&
1210                     tmp != MLX5_XMETA_MODE_META16 &&
1211                     tmp != MLX5_XMETA_MODE_META32 &&
1212                     tmp != MLX5_XMETA_MODE_MISS_INFO) {
1213                         DRV_LOG(ERR, "Invalid extensive metadata parameter.");
1214                         rte_errno = EINVAL;
1215                         return -rte_errno;
1216                 }
1217                 if (tmp != MLX5_XMETA_MODE_MISS_INFO)
1218                         config->dv_xmeta_en = tmp;
1219                 else
1220                         config->dv_miss_info = 1;
1221         } else if (strcmp(MLX5_LACP_BY_USER, key) == 0) {
1222                 config->lacp_by_user = !!tmp;
1223         } else if (strcmp(MLX5_RECLAIM_MEM, key) == 0) {
1224                 if (tmp != MLX5_RCM_NONE &&
1225                     tmp != MLX5_RCM_LIGHT &&
1226                     tmp != MLX5_RCM_AGGR) {
1227                         DRV_LOG(ERR, "Unrecognize %s: \"%s\"", key, val);
1228                         rte_errno = EINVAL;
1229                         return -rte_errno;
1230                 }
1231                 config->reclaim_mode = tmp;
1232         } else if (strcmp(MLX5_DECAP_EN, key) == 0) {
1233                 config->decap_en = !!tmp;
1234         } else if (strcmp(MLX5_ALLOW_DUPLICATE_PATTERN, key) == 0) {
1235                 config->allow_duplicate_pattern = !!tmp;
1236         }
1237         return 0;
1238 }
1239
1240 /**
1241  * Parse user device parameters and adjust them according to device
1242  * capabilities.
1243  *
1244  * @param sh
1245  *   Pointer to shared device context.
1246  * @param mkvlist
1247  *   Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
1248  * @param config
1249  *   Pointer to shared device configuration structure.
1250  *
1251  * @return
1252  *   0 on success, a negative errno value otherwise and rte_errno is set.
1253  */
1254 static int
1255 mlx5_shared_dev_ctx_args_config(struct mlx5_dev_ctx_shared *sh,
1256                                 struct mlx5_kvargs_ctrl *mkvlist,
1257                                 struct mlx5_sh_config *config)
1258 {
1259         const char **params = (const char *[]){
1260                 MLX5_TX_PP,
1261                 MLX5_TX_SKEW,
1262                 MLX5_L3_VXLAN_EN,
1263                 MLX5_VF_NL_EN,
1264                 MLX5_DV_ESW_EN,
1265                 MLX5_DV_FLOW_EN,
1266                 MLX5_DV_XMETA_EN,
1267                 MLX5_LACP_BY_USER,
1268                 MLX5_RECLAIM_MEM,
1269                 MLX5_DECAP_EN,
1270                 MLX5_ALLOW_DUPLICATE_PATTERN,
1271                 NULL,
1272         };
1273         int ret = 0;
1274
1275         /* Default configuration. */
1276         memset(config, 0, sizeof(*config));
1277         config->vf_nl_en = 1;
1278         config->dv_esw_en = 1;
1279         config->dv_flow_en = 1;
1280         config->decap_en = 1;
1281         config->allow_duplicate_pattern = 1;
1282         if (mkvlist != NULL) {
1283                 /* Process parameters. */
1284                 ret = mlx5_kvargs_process(mkvlist, params,
1285                                           mlx5_dev_args_check_handler, config);
1286                 if (ret) {
1287                         DRV_LOG(ERR, "Failed to process device arguments: %s",
1288                                 strerror(rte_errno));
1289                         return -rte_errno;
1290                 }
1291         }
1292         /* Adjust parameters according to device capabilities. */
1293         if (config->dv_flow_en && !sh->dev_cap.dv_flow_en) {
1294                 DRV_LOG(WARNING, "DV flow is not supported.");
1295                 config->dv_flow_en = 0;
1296         }
1297         if (config->dv_esw_en && !sh->dev_cap.dv_esw_en) {
1298                 DRV_LOG(DEBUG, "E-Switch DV flow is not supported.");
1299                 config->dv_esw_en = 0;
1300         }
1301         if (config->dv_miss_info && config->dv_esw_en)
1302                 config->dv_xmeta_en = MLX5_XMETA_MODE_META16;
1303         if (!config->dv_esw_en &&
1304             config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
1305                 DRV_LOG(WARNING,
1306                         "Metadata mode %u is not supported (no E-Switch).",
1307                         config->dv_xmeta_en);
1308                 config->dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
1309         }
1310         if (config->tx_pp && !sh->dev_cap.txpp_en) {
1311                 DRV_LOG(ERR, "Packet pacing is not supported.");
1312                 rte_errno = ENODEV;
1313                 return -rte_errno;
1314         }
1315         if (!config->tx_pp && config->tx_skew) {
1316                 DRV_LOG(WARNING,
1317                         "\"tx_skew\" doesn't affect without \"tx_pp\".");
1318         }
1319         /*
1320          * If HW has bug working with tunnel packet decapsulation and scatter
1321          * FCS, and decapsulation is needed, clear the hw_fcs_strip bit.
1322          * Then RTE_ETH_RX_OFFLOAD_KEEP_CRC bit will not be set anymore.
1323          */
1324         if (sh->dev_cap.scatter_fcs_w_decap_disable && sh->config.decap_en)
1325                 config->hw_fcs_strip = 0;
1326         else
1327                 config->hw_fcs_strip = sh->dev_cap.hw_fcs_strip;
1328         DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
1329                 (config->hw_fcs_strip ? "" : "not "));
1330         DRV_LOG(DEBUG, "\"tx_pp\" is %d.", config->tx_pp);
1331         DRV_LOG(DEBUG, "\"tx_skew\" is %d.", config->tx_skew);
1332         DRV_LOG(DEBUG, "\"reclaim_mode\" is %u.", config->reclaim_mode);
1333         DRV_LOG(DEBUG, "\"dv_esw_en\" is %u.", config->dv_esw_en);
1334         DRV_LOG(DEBUG, "\"dv_flow_en\" is %u.", config->dv_flow_en);
1335         DRV_LOG(DEBUG, "\"dv_xmeta_en\" is %u.", config->dv_xmeta_en);
1336         DRV_LOG(DEBUG, "\"dv_miss_info\" is %u.", config->dv_miss_info);
1337         DRV_LOG(DEBUG, "\"l3_vxlan_en\" is %u.", config->l3_vxlan_en);
1338         DRV_LOG(DEBUG, "\"vf_nl_en\" is %u.", config->vf_nl_en);
1339         DRV_LOG(DEBUG, "\"lacp_by_user\" is %u.", config->lacp_by_user);
1340         DRV_LOG(DEBUG, "\"decap_en\" is %u.", config->decap_en);
1341         DRV_LOG(DEBUG, "\"allow_duplicate_pattern\" is %u.",
1342                 config->allow_duplicate_pattern);
1343         return 0;
1344 }
1345
1346 /**
1347  * Configure realtime timestamp format.
1348  *
1349  * @param sh
1350  *   Pointer to mlx5_dev_ctx_shared object.
1351  * @param hca_attr
1352  *   Pointer to DevX HCA capabilities structure.
1353  */
1354 void
1355 mlx5_rt_timestamp_config(struct mlx5_dev_ctx_shared *sh,
1356                          struct mlx5_hca_attr *hca_attr)
1357 {
1358         uint32_t dw_cnt = MLX5_ST_SZ_DW(register_mtutc);
1359         uint32_t reg[dw_cnt];
1360         int ret = ENOTSUP;
1361
1362         if (hca_attr->access_register_user)
1363                 ret = mlx5_devx_cmd_register_read(sh->cdev->ctx,
1364                                                   MLX5_REGISTER_ID_MTUTC, 0,
1365                                                   reg, dw_cnt);
1366         if (!ret) {
1367                 uint32_t ts_mode;
1368
1369                 /* MTUTC register is read successfully. */
1370                 ts_mode = MLX5_GET(register_mtutc, reg, time_stamp_mode);
1371                 if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
1372                         sh->dev_cap.rt_timestamp = 1;
1373         } else {
1374                 /* Kernel does not support register reading. */
1375                 if (hca_attr->dev_freq_khz == (NS_PER_S / MS_PER_S))
1376                         sh->dev_cap.rt_timestamp = 1;
1377         }
1378 }
1379
1380 /**
1381  * Allocate shared device context. If there is multiport device the
1382  * master and representors will share this context, if there is single
1383  * port dedicated device, the context will be used by only given
1384  * port due to unification.
1385  *
1386  * Routine first searches the context for the specified device name,
1387  * if found the shared context assumed and reference counter is incremented.
1388  * If no context found the new one is created and initialized with specified
1389  * device context and parameters.
1390  *
1391  * @param[in] spawn
1392  *   Pointer to the device attributes (name, port, etc).
1393  * @param mkvlist
1394  *   Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
1395  *
1396  * @return
1397  *   Pointer to mlx5_dev_ctx_shared object on success,
1398  *   otherwise NULL and rte_errno is set.
1399  */
1400 struct mlx5_dev_ctx_shared *
1401 mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
1402                           struct mlx5_kvargs_ctrl *mkvlist)
1403 {
1404         struct mlx5_dev_ctx_shared *sh;
1405         int err = 0;
1406         uint32_t i;
1407
1408         MLX5_ASSERT(spawn);
1409         /* Secondary process should not create the shared context. */
1410         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
1411         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
1412         /* Search for IB context by device name. */
1413         LIST_FOREACH(sh, &mlx5_dev_ctx_list, next) {
1414                 if (!strcmp(sh->ibdev_name, spawn->phys_dev_name)) {
1415                         sh->refcnt++;
1416                         goto exit;
1417                 }
1418         }
1419         /* No device found, we have to create new shared context. */
1420         MLX5_ASSERT(spawn->max_port);
1421         sh = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
1422                          sizeof(struct mlx5_dev_ctx_shared) +
1423                          spawn->max_port * sizeof(struct mlx5_dev_shared_port),
1424                          RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
1425         if (!sh) {
1426                 DRV_LOG(ERR, "Shared context allocation failure.");
1427                 rte_errno = ENOMEM;
1428                 goto exit;
1429         }
1430         pthread_mutex_init(&sh->txpp.mutex, NULL);
1431         sh->numa_node = spawn->cdev->dev->numa_node;
1432         sh->cdev = spawn->cdev;
1433         sh->esw_mode = !!(spawn->info.master || spawn->info.representor);
1434         if (spawn->bond_info)
1435                 sh->bond = *spawn->bond_info;
1436         err = mlx5_os_capabilities_prepare(sh);
1437         if (err) {
1438                 DRV_LOG(ERR, "Fail to configure device capabilities.");
1439                 goto error;
1440         }
1441         err = mlx5_shared_dev_ctx_args_config(sh, mkvlist, &sh->config);
1442         if (err) {
1443                 DRV_LOG(ERR, "Failed to process device configure: %s",
1444                         strerror(rte_errno));
1445                 goto error;
1446         }
1447         sh->refcnt = 1;
1448         sh->max_port = spawn->max_port;
1449         strncpy(sh->ibdev_name, mlx5_os_get_ctx_device_name(sh->cdev->ctx),
1450                 sizeof(sh->ibdev_name) - 1);
1451         strncpy(sh->ibdev_path, mlx5_os_get_ctx_device_path(sh->cdev->ctx),
1452                 sizeof(sh->ibdev_path) - 1);
1453         /*
1454          * Setting port_id to max unallowed value means there is no interrupt
1455          * subhandler installed for the given port index i.
1456          */
1457         for (i = 0; i < sh->max_port; i++) {
1458                 sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
1459                 sh->port[i].devx_ih_port_id = RTE_MAX_ETHPORTS;
1460         }
1461         if (sh->cdev->config.devx) {
1462                 sh->td = mlx5_devx_cmd_create_td(sh->cdev->ctx);
1463                 if (!sh->td) {
1464                         DRV_LOG(ERR, "TD allocation failure");
1465                         rte_errno = ENOMEM;
1466                         goto error;
1467                 }
1468                 if (mlx5_setup_tis(sh)) {
1469                         DRV_LOG(ERR, "TIS allocation failure");
1470                         rte_errno = ENOMEM;
1471                         goto error;
1472                 }
1473                 err = mlx5_rxtx_uars_prepare(sh);
1474                 if (err)
1475                         goto error;
1476 #ifndef RTE_ARCH_64
1477         } else {
1478                 /* Initialize UAR access locks for 32bit implementations. */
1479                 rte_spinlock_init(&sh->uar_lock_cq);
1480                 for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
1481                         rte_spinlock_init(&sh->uar_lock[i]);
1482 #endif
1483         }
1484         mlx5_os_dev_shared_handler_install(sh);
1485         if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
1486                 err = mlx5_flow_os_init_workspace_once();
1487                 if (err)
1488                         goto error;
1489         }
1490         mlx5_flow_aging_init(sh);
1491         mlx5_flow_counters_mng_init(sh);
1492         mlx5_flow_ipool_create(sh);
1493         /* Add context to the global device list. */
1494         LIST_INSERT_HEAD(&mlx5_dev_ctx_list, sh, next);
1495         rte_spinlock_init(&sh->geneve_tlv_opt_sl);
1496 exit:
1497         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1498         return sh;
1499 error:
1500         err = rte_errno;
1501         pthread_mutex_destroy(&sh->txpp.mutex);
1502         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1503         MLX5_ASSERT(sh);
1504         mlx5_rxtx_uars_release(sh);
1505         i = 0;
1506         do {
1507                 if (sh->tis[i])
1508                         claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
1509         } while (++i < (uint32_t)sh->bond.n_port);
1510         if (sh->td)
1511                 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1512         mlx5_free(sh);
1513         rte_errno = err;
1514         return NULL;
1515 }
1516
1517 /**
1518  * Free shared IB device context. Decrement counter and if zero free
1519  * all allocated resources and close handles.
1520  *
1521  * @param[in] sh
1522  *   Pointer to mlx5_dev_ctx_shared object to free
1523  */
1524 void
1525 mlx5_free_shared_dev_ctx(struct mlx5_dev_ctx_shared *sh)
1526 {
1527         int ret;
1528         int i = 0;
1529
1530         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
1531 #ifdef RTE_LIBRTE_MLX5_DEBUG
1532         /* Check the object presence in the list. */
1533         struct mlx5_dev_ctx_shared *lctx;
1534
1535         LIST_FOREACH(lctx, &mlx5_dev_ctx_list, next)
1536                 if (lctx == sh)
1537                         break;
1538         MLX5_ASSERT(lctx);
1539         if (lctx != sh) {
1540                 DRV_LOG(ERR, "Freeing non-existing shared IB context");
1541                 goto exit;
1542         }
1543 #endif
1544         MLX5_ASSERT(sh);
1545         MLX5_ASSERT(sh->refcnt);
1546         /* Secondary process should not free the shared context. */
1547         MLX5_ASSERT(rte_eal_process_type() == RTE_PROC_PRIMARY);
1548         if (--sh->refcnt)
1549                 goto exit;
1550         /* Stop watching for mempool events and unregister all mempools. */
1551         if (!sh->cdev->config.mr_mempool_reg_en) {
1552                 ret = rte_mempool_event_callback_unregister
1553                                 (mlx5_dev_ctx_shared_rx_mempool_event_cb, sh);
1554                 if (ret == 0)
1555                         rte_mempool_walk
1556                              (mlx5_dev_ctx_shared_rx_mempool_unregister_cb, sh);
1557         }
1558         /* Remove context from the global device list. */
1559         LIST_REMOVE(sh, next);
1560         /* Release resources on the last device removal. */
1561         if (LIST_EMPTY(&mlx5_dev_ctx_list)) {
1562                 mlx5_os_net_cleanup();
1563                 mlx5_flow_os_release_workspace();
1564         }
1565         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1566         if (sh->flex_parsers_dv) {
1567                 mlx5_list_destroy(sh->flex_parsers_dv);
1568                 sh->flex_parsers_dv = NULL;
1569         }
1570         /*
1571          *  Ensure there is no async event handler installed.
1572          *  Only primary process handles async device events.
1573          **/
1574         mlx5_flow_counters_mng_close(sh);
1575         if (sh->ct_mng)
1576                 mlx5_flow_aso_ct_mng_close(sh);
1577         if (sh->aso_age_mng) {
1578                 mlx5_flow_aso_age_mng_close(sh);
1579                 sh->aso_age_mng = NULL;
1580         }
1581         if (sh->mtrmng)
1582                 mlx5_aso_flow_mtrs_mng_close(sh);
1583         mlx5_flow_ipool_destroy(sh);
1584         mlx5_os_dev_shared_handler_uninstall(sh);
1585         mlx5_rxtx_uars_release(sh);
1586         do {
1587                 if (sh->tis[i])
1588                         claim_zero(mlx5_devx_cmd_destroy(sh->tis[i]));
1589         } while (++i < sh->bond.n_port);
1590         if (sh->td)
1591                 claim_zero(mlx5_devx_cmd_destroy(sh->td));
1592         MLX5_ASSERT(sh->geneve_tlv_option_resource == NULL);
1593         pthread_mutex_destroy(&sh->txpp.mutex);
1594         mlx5_free(sh);
1595         return;
1596 exit:
1597         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
1598 }
1599
1600 /**
1601  * Destroy table hash list.
1602  *
1603  * @param[in] priv
1604  *   Pointer to the private device data structure.
1605  */
1606 void
1607 mlx5_free_table_hash_list(struct mlx5_priv *priv)
1608 {
1609         struct mlx5_dev_ctx_shared *sh = priv->sh;
1610
1611         if (!sh->flow_tbls)
1612                 return;
1613         mlx5_hlist_destroy(sh->flow_tbls);
1614         sh->flow_tbls = NULL;
1615 }
1616
1617 /**
1618  * Initialize flow table hash list and create the root tables entry
1619  * for each domain.
1620  *
1621  * @param[in] priv
1622  *   Pointer to the private device data structure.
1623  *
1624  * @return
1625  *   Zero on success, positive error code otherwise.
1626  */
1627 int
1628 mlx5_alloc_table_hash_list(struct mlx5_priv *priv __rte_unused)
1629 {
1630         int err = 0;
1631         /* Tables are only used in DV and DR modes. */
1632 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
1633         struct mlx5_dev_ctx_shared *sh = priv->sh;
1634         char s[MLX5_NAME_SIZE];
1635
1636         MLX5_ASSERT(sh);
1637         snprintf(s, sizeof(s), "%s_flow_table", priv->sh->ibdev_name);
1638         sh->flow_tbls = mlx5_hlist_create(s, MLX5_FLOW_TABLE_HLIST_ARRAY_SIZE,
1639                                           false, true, sh,
1640                                           flow_dv_tbl_create_cb,
1641                                           flow_dv_tbl_match_cb,
1642                                           flow_dv_tbl_remove_cb,
1643                                           flow_dv_tbl_clone_cb,
1644                                           flow_dv_tbl_clone_free_cb);
1645         if (!sh->flow_tbls) {
1646                 DRV_LOG(ERR, "flow tables with hash creation failed.");
1647                 err = ENOMEM;
1648                 return err;
1649         }
1650 #ifndef HAVE_MLX5DV_DR
1651         struct rte_flow_error error;
1652         struct rte_eth_dev *dev = &rte_eth_devices[priv->dev_data->port_id];
1653
1654         /*
1655          * In case we have not DR support, the zero tables should be created
1656          * because DV expect to see them even if they cannot be created by
1657          * RDMA-CORE.
1658          */
1659         if (!flow_dv_tbl_resource_get(dev, 0, 0, 0, 0,
1660                 NULL, 0, 1, 0, &error) ||
1661             !flow_dv_tbl_resource_get(dev, 0, 1, 0, 0,
1662                 NULL, 0, 1, 0, &error) ||
1663             !flow_dv_tbl_resource_get(dev, 0, 0, 1, 0,
1664                 NULL, 0, 1, 0, &error)) {
1665                 err = ENOMEM;
1666                 goto error;
1667         }
1668         return err;
1669 error:
1670         mlx5_free_table_hash_list(priv);
1671 #endif /* HAVE_MLX5DV_DR */
1672 #endif
1673         return err;
1674 }
1675
1676 /**
1677  * Retrieve integer value from environment variable.
1678  *
1679  * @param[in] name
1680  *   Environment variable name.
1681  *
1682  * @return
1683  *   Integer value, 0 if the variable is not set.
1684  */
1685 int
1686 mlx5_getenv_int(const char *name)
1687 {
1688         const char *val = getenv(name);
1689
1690         if (val == NULL)
1691                 return 0;
1692         return atoi(val);
1693 }
1694
1695 /**
1696  * DPDK callback to add udp tunnel port
1697  *
1698  * @param[in] dev
1699  *   A pointer to eth_dev
1700  * @param[in] udp_tunnel
1701  *   A pointer to udp tunnel
1702  *
1703  * @return
1704  *   0 on valid udp ports and tunnels, -ENOTSUP otherwise.
1705  */
1706 int
1707 mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
1708                          struct rte_eth_udp_tunnel *udp_tunnel)
1709 {
1710         MLX5_ASSERT(udp_tunnel != NULL);
1711         if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN &&
1712             udp_tunnel->udp_port == 4789)
1713                 return 0;
1714         if (udp_tunnel->prot_type == RTE_ETH_TUNNEL_TYPE_VXLAN_GPE &&
1715             udp_tunnel->udp_port == 4790)
1716                 return 0;
1717         return -ENOTSUP;
1718 }
1719
1720 /**
1721  * Initialize process private data structure.
1722  *
1723  * @param dev
1724  *   Pointer to Ethernet device structure.
1725  *
1726  * @return
1727  *   0 on success, a negative errno value otherwise and rte_errno is set.
1728  */
1729 int
1730 mlx5_proc_priv_init(struct rte_eth_dev *dev)
1731 {
1732         struct mlx5_priv *priv = dev->data->dev_private;
1733         struct mlx5_proc_priv *ppriv;
1734         size_t ppriv_size;
1735
1736         mlx5_proc_priv_uninit(dev);
1737         /*
1738          * UAR register table follows the process private structure. BlueFlame
1739          * registers for Tx queues are stored in the table.
1740          */
1741         ppriv_size = sizeof(struct mlx5_proc_priv) +
1742                      priv->txqs_n * sizeof(struct mlx5_uar_data);
1743         ppriv = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, ppriv_size,
1744                             RTE_CACHE_LINE_SIZE, dev->device->numa_node);
1745         if (!ppriv) {
1746                 rte_errno = ENOMEM;
1747                 return -rte_errno;
1748         }
1749         ppriv->uar_table_sz = priv->txqs_n;
1750         dev->process_private = ppriv;
1751         if (rte_eal_process_type() == RTE_PROC_PRIMARY)
1752                 priv->sh->pppriv = ppriv;
1753         return 0;
1754 }
1755
1756 /**
1757  * Un-initialize process private data structure.
1758  *
1759  * @param dev
1760  *   Pointer to Ethernet device structure.
1761  */
1762 void
1763 mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
1764 {
1765         if (!dev->process_private)
1766                 return;
1767         mlx5_free(dev->process_private);
1768         dev->process_private = NULL;
1769 }
1770
1771 /**
1772  * DPDK callback to close the device.
1773  *
1774  * Destroy all queues and objects, free memory.
1775  *
1776  * @param dev
1777  *   Pointer to Ethernet device structure.
1778  */
1779 int
1780 mlx5_dev_close(struct rte_eth_dev *dev)
1781 {
1782         struct mlx5_priv *priv = dev->data->dev_private;
1783         unsigned int i;
1784         int ret;
1785
1786         if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
1787                 /* Check if process_private released. */
1788                 if (!dev->process_private)
1789                         return 0;
1790                 mlx5_tx_uar_uninit_secondary(dev);
1791                 mlx5_proc_priv_uninit(dev);
1792                 rte_eth_dev_release_port(dev);
1793                 return 0;
1794         }
1795         if (!priv->sh)
1796                 return 0;
1797         DRV_LOG(DEBUG, "port %u closing device \"%s\"",
1798                 dev->data->port_id,
1799                 ((priv->sh->cdev->ctx != NULL) ?
1800                 mlx5_os_get_ctx_device_name(priv->sh->cdev->ctx) : ""));
1801         /*
1802          * If default mreg copy action is removed at the stop stage,
1803          * the search will return none and nothing will be done anymore.
1804          */
1805         mlx5_flow_stop_default(dev);
1806         mlx5_traffic_disable(dev);
1807         /*
1808          * If all the flows are already flushed in the device stop stage,
1809          * then this will return directly without any action.
1810          */
1811         mlx5_flow_list_flush(dev, MLX5_FLOW_TYPE_GEN, true);
1812         mlx5_action_handle_flush(dev);
1813         mlx5_flow_meter_flush(dev, NULL);
1814         /* Prevent crashes when queues are still in use. */
1815         dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
1816         dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
1817         rte_wmb();
1818         /* Disable datapath on secondary process. */
1819         mlx5_mp_os_req_stop_rxtx(dev);
1820         /* Free the eCPRI flex parser resource. */
1821         mlx5_flex_parser_ecpri_release(dev);
1822         mlx5_flex_item_port_cleanup(dev);
1823 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
1824         flow_hw_resource_release(dev);
1825 #endif
1826         if (priv->rxq_privs != NULL) {
1827                 /* XXX race condition if mlx5_rx_burst() is still running. */
1828                 rte_delay_us_sleep(1000);
1829                 for (i = 0; (i != priv->rxqs_n); ++i)
1830                         mlx5_rxq_release(dev, i);
1831                 priv->rxqs_n = 0;
1832                 mlx5_free(priv->rxq_privs);
1833                 priv->rxq_privs = NULL;
1834         }
1835         if (priv->txqs != NULL) {
1836                 /* XXX race condition if mlx5_tx_burst() is still running. */
1837                 rte_delay_us_sleep(1000);
1838                 for (i = 0; (i != priv->txqs_n); ++i)
1839                         mlx5_txq_release(dev, i);
1840                 priv->txqs_n = 0;
1841                 priv->txqs = NULL;
1842         }
1843         mlx5_proc_priv_uninit(dev);
1844         if (priv->q_counters) {
1845                 mlx5_devx_cmd_destroy(priv->q_counters);
1846                 priv->q_counters = NULL;
1847         }
1848         if (priv->drop_queue.hrxq)
1849                 mlx5_drop_action_destroy(dev);
1850         if (priv->mreg_cp_tbl)
1851                 mlx5_hlist_destroy(priv->mreg_cp_tbl);
1852         mlx5_mprq_free_mp(dev);
1853         mlx5_os_free_shared_dr(priv);
1854         if (priv->rss_conf.rss_key != NULL)
1855                 mlx5_free(priv->rss_conf.rss_key);
1856         if (priv->reta_idx != NULL)
1857                 mlx5_free(priv->reta_idx);
1858         if (priv->sh->dev_cap.vf)
1859                 mlx5_os_mac_addr_flush(dev);
1860         if (priv->nl_socket_route >= 0)
1861                 close(priv->nl_socket_route);
1862         if (priv->nl_socket_rdma >= 0)
1863                 close(priv->nl_socket_rdma);
1864         if (priv->vmwa_context)
1865                 mlx5_vlan_vmwa_exit(priv->vmwa_context);
1866         ret = mlx5_hrxq_verify(dev);
1867         if (ret)
1868                 DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
1869                         dev->data->port_id);
1870         ret = mlx5_ind_table_obj_verify(dev);
1871         if (ret)
1872                 DRV_LOG(WARNING, "port %u some indirection table still remain",
1873                         dev->data->port_id);
1874         ret = mlx5_rxq_obj_verify(dev);
1875         if (ret)
1876                 DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
1877                         dev->data->port_id);
1878         ret = mlx5_rxq_verify(dev);
1879         if (ret)
1880                 DRV_LOG(WARNING, "port %u some Rx queues still remain",
1881                         dev->data->port_id);
1882         ret = mlx5_txq_obj_verify(dev);
1883         if (ret)
1884                 DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
1885                         dev->data->port_id);
1886         ret = mlx5_txq_verify(dev);
1887         if (ret)
1888                 DRV_LOG(WARNING, "port %u some Tx queues still remain",
1889                         dev->data->port_id);
1890         ret = mlx5_flow_verify(dev);
1891         if (ret)
1892                 DRV_LOG(WARNING, "port %u some flows still remain",
1893                         dev->data->port_id);
1894         if (priv->hrxqs)
1895                 mlx5_list_destroy(priv->hrxqs);
1896         /*
1897          * Free the shared context in last turn, because the cleanup
1898          * routines above may use some shared fields, like
1899          * mlx5_os_mac_addr_flush() uses ibdev_path for retrieving
1900          * ifindex if Netlink fails.
1901          */
1902         mlx5_free_shared_dev_ctx(priv->sh);
1903         if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
1904                 unsigned int c = 0;
1905                 uint16_t port_id;
1906
1907                 MLX5_ETH_FOREACH_DEV(port_id, dev->device) {
1908                         struct mlx5_priv *opriv =
1909                                 rte_eth_devices[port_id].data->dev_private;
1910
1911                         if (!opriv ||
1912                             opriv->domain_id != priv->domain_id ||
1913                             &rte_eth_devices[port_id] == dev)
1914                                 continue;
1915                         ++c;
1916                         break;
1917                 }
1918                 if (!c)
1919                         claim_zero(rte_eth_switch_domain_free(priv->domain_id));
1920         }
1921         memset(priv, 0, sizeof(*priv));
1922         priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
1923         /*
1924          * Reset mac_addrs to NULL such that it is not freed as part of
1925          * rte_eth_dev_release_port(). mac_addrs is part of dev_private so
1926          * it is freed when dev_private is freed.
1927          */
1928         dev->data->mac_addrs = NULL;
1929         return 0;
1930 }
1931
1932 const struct eth_dev_ops mlx5_dev_ops = {
1933         .dev_configure = mlx5_dev_configure,
1934         .dev_start = mlx5_dev_start,
1935         .dev_stop = mlx5_dev_stop,
1936         .dev_set_link_down = mlx5_set_link_down,
1937         .dev_set_link_up = mlx5_set_link_up,
1938         .dev_close = mlx5_dev_close,
1939         .promiscuous_enable = mlx5_promiscuous_enable,
1940         .promiscuous_disable = mlx5_promiscuous_disable,
1941         .allmulticast_enable = mlx5_allmulticast_enable,
1942         .allmulticast_disable = mlx5_allmulticast_disable,
1943         .link_update = mlx5_link_update,
1944         .stats_get = mlx5_stats_get,
1945         .stats_reset = mlx5_stats_reset,
1946         .xstats_get = mlx5_xstats_get,
1947         .xstats_reset = mlx5_xstats_reset,
1948         .xstats_get_names = mlx5_xstats_get_names,
1949         .fw_version_get = mlx5_fw_version_get,
1950         .dev_infos_get = mlx5_dev_infos_get,
1951         .representor_info_get = mlx5_representor_info_get,
1952         .read_clock = mlx5_txpp_read_clock,
1953         .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
1954         .vlan_filter_set = mlx5_vlan_filter_set,
1955         .rx_queue_setup = mlx5_rx_queue_setup,
1956         .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
1957         .tx_queue_setup = mlx5_tx_queue_setup,
1958         .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
1959         .rx_queue_release = mlx5_rx_queue_release,
1960         .tx_queue_release = mlx5_tx_queue_release,
1961         .rx_queue_start = mlx5_rx_queue_start,
1962         .rx_queue_stop = mlx5_rx_queue_stop,
1963         .tx_queue_start = mlx5_tx_queue_start,
1964         .tx_queue_stop = mlx5_tx_queue_stop,
1965         .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
1966         .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
1967         .mac_addr_remove = mlx5_mac_addr_remove,
1968         .mac_addr_add = mlx5_mac_addr_add,
1969         .mac_addr_set = mlx5_mac_addr_set,
1970         .set_mc_addr_list = mlx5_set_mc_addr_list,
1971         .mtu_set = mlx5_dev_set_mtu,
1972         .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
1973         .vlan_offload_set = mlx5_vlan_offload_set,
1974         .reta_update = mlx5_dev_rss_reta_update,
1975         .reta_query = mlx5_dev_rss_reta_query,
1976         .rss_hash_update = mlx5_rss_hash_update,
1977         .rss_hash_conf_get = mlx5_rss_hash_conf_get,
1978         .flow_ops_get = mlx5_flow_ops_get,
1979         .rxq_info_get = mlx5_rxq_info_get,
1980         .txq_info_get = mlx5_txq_info_get,
1981         .rx_burst_mode_get = mlx5_rx_burst_mode_get,
1982         .tx_burst_mode_get = mlx5_tx_burst_mode_get,
1983         .rx_queue_intr_enable = mlx5_rx_intr_enable,
1984         .rx_queue_intr_disable = mlx5_rx_intr_disable,
1985         .is_removed = mlx5_is_removed,
1986         .udp_tunnel_port_add  = mlx5_udp_tunnel_port_add,
1987         .get_module_info = mlx5_get_module_info,
1988         .get_module_eeprom = mlx5_get_module_eeprom,
1989         .hairpin_cap_get = mlx5_hairpin_cap_get,
1990         .mtr_ops_get = mlx5_flow_meter_ops_get,
1991         .hairpin_bind = mlx5_hairpin_bind,
1992         .hairpin_unbind = mlx5_hairpin_unbind,
1993         .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
1994         .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
1995         .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
1996         .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
1997         .get_monitor_addr = mlx5_get_monitor_addr,
1998 };
1999
2000 /* Available operations from secondary process. */
2001 const struct eth_dev_ops mlx5_dev_sec_ops = {
2002         .stats_get = mlx5_stats_get,
2003         .stats_reset = mlx5_stats_reset,
2004         .xstats_get = mlx5_xstats_get,
2005         .xstats_reset = mlx5_xstats_reset,
2006         .xstats_get_names = mlx5_xstats_get_names,
2007         .fw_version_get = mlx5_fw_version_get,
2008         .dev_infos_get = mlx5_dev_infos_get,
2009         .representor_info_get = mlx5_representor_info_get,
2010         .read_clock = mlx5_txpp_read_clock,
2011         .rx_queue_start = mlx5_rx_queue_start,
2012         .rx_queue_stop = mlx5_rx_queue_stop,
2013         .tx_queue_start = mlx5_tx_queue_start,
2014         .tx_queue_stop = mlx5_tx_queue_stop,
2015         .rxq_info_get = mlx5_rxq_info_get,
2016         .txq_info_get = mlx5_txq_info_get,
2017         .rx_burst_mode_get = mlx5_rx_burst_mode_get,
2018         .tx_burst_mode_get = mlx5_tx_burst_mode_get,
2019         .get_module_info = mlx5_get_module_info,
2020         .get_module_eeprom = mlx5_get_module_eeprom,
2021 };
2022
2023 /* Available operations in flow isolated mode. */
2024 const struct eth_dev_ops mlx5_dev_ops_isolate = {
2025         .dev_configure = mlx5_dev_configure,
2026         .dev_start = mlx5_dev_start,
2027         .dev_stop = mlx5_dev_stop,
2028         .dev_set_link_down = mlx5_set_link_down,
2029         .dev_set_link_up = mlx5_set_link_up,
2030         .dev_close = mlx5_dev_close,
2031         .promiscuous_enable = mlx5_promiscuous_enable,
2032         .promiscuous_disable = mlx5_promiscuous_disable,
2033         .allmulticast_enable = mlx5_allmulticast_enable,
2034         .allmulticast_disable = mlx5_allmulticast_disable,
2035         .link_update = mlx5_link_update,
2036         .stats_get = mlx5_stats_get,
2037         .stats_reset = mlx5_stats_reset,
2038         .xstats_get = mlx5_xstats_get,
2039         .xstats_reset = mlx5_xstats_reset,
2040         .xstats_get_names = mlx5_xstats_get_names,
2041         .fw_version_get = mlx5_fw_version_get,
2042         .dev_infos_get = mlx5_dev_infos_get,
2043         .representor_info_get = mlx5_representor_info_get,
2044         .read_clock = mlx5_txpp_read_clock,
2045         .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
2046         .vlan_filter_set = mlx5_vlan_filter_set,
2047         .rx_queue_setup = mlx5_rx_queue_setup,
2048         .rx_hairpin_queue_setup = mlx5_rx_hairpin_queue_setup,
2049         .tx_queue_setup = mlx5_tx_queue_setup,
2050         .tx_hairpin_queue_setup = mlx5_tx_hairpin_queue_setup,
2051         .rx_queue_release = mlx5_rx_queue_release,
2052         .tx_queue_release = mlx5_tx_queue_release,
2053         .rx_queue_start = mlx5_rx_queue_start,
2054         .rx_queue_stop = mlx5_rx_queue_stop,
2055         .tx_queue_start = mlx5_tx_queue_start,
2056         .tx_queue_stop = mlx5_tx_queue_stop,
2057         .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
2058         .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
2059         .mac_addr_remove = mlx5_mac_addr_remove,
2060         .mac_addr_add = mlx5_mac_addr_add,
2061         .mac_addr_set = mlx5_mac_addr_set,
2062         .set_mc_addr_list = mlx5_set_mc_addr_list,
2063         .mtu_set = mlx5_dev_set_mtu,
2064         .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
2065         .vlan_offload_set = mlx5_vlan_offload_set,
2066         .flow_ops_get = mlx5_flow_ops_get,
2067         .rxq_info_get = mlx5_rxq_info_get,
2068         .txq_info_get = mlx5_txq_info_get,
2069         .rx_burst_mode_get = mlx5_rx_burst_mode_get,
2070         .tx_burst_mode_get = mlx5_tx_burst_mode_get,
2071         .rx_queue_intr_enable = mlx5_rx_intr_enable,
2072         .rx_queue_intr_disable = mlx5_rx_intr_disable,
2073         .is_removed = mlx5_is_removed,
2074         .get_module_info = mlx5_get_module_info,
2075         .get_module_eeprom = mlx5_get_module_eeprom,
2076         .hairpin_cap_get = mlx5_hairpin_cap_get,
2077         .mtr_ops_get = mlx5_flow_meter_ops_get,
2078         .hairpin_bind = mlx5_hairpin_bind,
2079         .hairpin_unbind = mlx5_hairpin_unbind,
2080         .hairpin_get_peer_ports = mlx5_hairpin_get_peer_ports,
2081         .hairpin_queue_peer_update = mlx5_hairpin_queue_peer_update,
2082         .hairpin_queue_peer_bind = mlx5_hairpin_queue_peer_bind,
2083         .hairpin_queue_peer_unbind = mlx5_hairpin_queue_peer_unbind,
2084         .get_monitor_addr = mlx5_get_monitor_addr,
2085 };
2086
2087 /**
2088  * Verify and store value for device argument.
2089  *
2090  * @param[in] key
2091  *   Key argument to verify.
2092  * @param[in] val
2093  *   Value associated with key.
2094  * @param opaque
2095  *   User data.
2096  *
2097  * @return
2098  *   0 on success, a negative errno value otherwise and rte_errno is set.
2099  */
2100 static int
2101 mlx5_port_args_check_handler(const char *key, const char *val, void *opaque)
2102 {
2103         struct mlx5_port_config *config = opaque;
2104         signed long tmp;
2105
2106         /* No-op, port representors are processed in mlx5_dev_spawn(). */
2107         if (!strcmp(MLX5_REPRESENTOR, key))
2108                 return 0;
2109         errno = 0;
2110         tmp = strtol(val, NULL, 0);
2111         if (errno) {
2112                 rte_errno = errno;
2113                 DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
2114                 return -rte_errno;
2115         }
2116         if (tmp < 0) {
2117                 /* Negative values are acceptable for some keys only. */
2118                 rte_errno = EINVAL;
2119                 DRV_LOG(WARNING, "%s: invalid negative value \"%s\"", key, val);
2120                 return -rte_errno;
2121         }
2122         if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
2123                 if (tmp > MLX5_CQE_RESP_FORMAT_L34H_STRIDX) {
2124                         DRV_LOG(ERR, "invalid CQE compression "
2125                                      "format parameter");
2126                         rte_errno = EINVAL;
2127                         return -rte_errno;
2128                 }
2129                 config->cqe_comp = !!tmp;
2130                 config->cqe_comp_fmt = tmp;
2131         } else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
2132                 config->hw_padding = !!tmp;
2133         } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
2134                 config->mprq.enabled = !!tmp;
2135         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
2136                 config->mprq.log_stride_num = tmp;
2137         } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_SIZE, key) == 0) {
2138                 config->mprq.log_stride_size = tmp;
2139         } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
2140                 config->mprq.max_memcpy_len = tmp;
2141         } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
2142                 config->mprq.min_rxqs_num = tmp;
2143         } else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
2144                 DRV_LOG(WARNING, "%s: deprecated parameter,"
2145                                  " converted to txq_inline_max", key);
2146                 config->txq_inline_max = tmp;
2147         } else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
2148                 config->txq_inline_max = tmp;
2149         } else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
2150                 config->txq_inline_min = tmp;
2151         } else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
2152                 config->txq_inline_mpw = tmp;
2153         } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
2154                 config->txqs_inline = tmp;
2155         } else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
2156                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
2157         } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
2158                 config->mps = !!tmp;
2159         } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
2160                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
2161         } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
2162                 DRV_LOG(WARNING, "%s: deprecated parameter,"
2163                                  " converted to txq_inline_mpw", key);
2164                 config->txq_inline_mpw = tmp;
2165         } else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
2166                 DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
2167         } else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
2168                 config->rx_vec_en = !!tmp;
2169         } else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
2170                 config->max_dump_files_num = tmp;
2171         } else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
2172                 config->lro_timeout = tmp;
2173         } else if (strcmp(MLX5_HP_BUF_SIZE, key) == 0) {
2174                 config->log_hp_size = tmp;
2175         } else if (strcmp(MLX5_DELAY_DROP, key) == 0) {
2176                 config->std_delay_drop = !!(tmp & MLX5_DELAY_DROP_STANDARD);
2177                 config->hp_delay_drop = !!(tmp & MLX5_DELAY_DROP_HAIRPIN);
2178         }
2179         return 0;
2180 }
2181
2182 /**
2183  * Parse user port parameters and adjust them according to device capabilities.
2184  *
2185  * @param priv
2186  *   Pointer to shared device context.
2187  * @param mkvlist
2188  *   Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
2189  * @param config
2190  *   Pointer to port configuration structure.
2191  *
2192  * @return
2193  *   0 on success, a negative errno value otherwise and rte_errno is set.
2194  */
2195 int
2196 mlx5_port_args_config(struct mlx5_priv *priv, struct mlx5_kvargs_ctrl *mkvlist,
2197                       struct mlx5_port_config *config)
2198 {
2199         struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
2200         struct mlx5_dev_cap *dev_cap = &priv->sh->dev_cap;
2201         bool devx = priv->sh->cdev->config.devx;
2202         const char **params = (const char *[]){
2203                 MLX5_RXQ_CQE_COMP_EN,
2204                 MLX5_RXQ_PKT_PAD_EN,
2205                 MLX5_RX_MPRQ_EN,
2206                 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
2207                 MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
2208                 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
2209                 MLX5_RXQS_MIN_MPRQ,
2210                 MLX5_TXQ_INLINE,
2211                 MLX5_TXQ_INLINE_MIN,
2212                 MLX5_TXQ_INLINE_MAX,
2213                 MLX5_TXQ_INLINE_MPW,
2214                 MLX5_TXQS_MIN_INLINE,
2215                 MLX5_TXQS_MAX_VEC,
2216                 MLX5_TXQ_MPW_EN,
2217                 MLX5_TXQ_MPW_HDR_DSEG_EN,
2218                 MLX5_TXQ_MAX_INLINE_LEN,
2219                 MLX5_TX_VEC_EN,
2220                 MLX5_RX_VEC_EN,
2221                 MLX5_REPRESENTOR,
2222                 MLX5_MAX_DUMP_FILES_NUM,
2223                 MLX5_LRO_TIMEOUT_USEC,
2224                 MLX5_HP_BUF_SIZE,
2225                 MLX5_DELAY_DROP,
2226                 NULL,
2227         };
2228         int ret = 0;
2229
2230         /* Default configuration. */
2231         memset(config, 0, sizeof(*config));
2232         config->mps = MLX5_ARG_UNSET;
2233         config->cqe_comp = 1;
2234         config->rx_vec_en = 1;
2235         config->txq_inline_max = MLX5_ARG_UNSET;
2236         config->txq_inline_min = MLX5_ARG_UNSET;
2237         config->txq_inline_mpw = MLX5_ARG_UNSET;
2238         config->txqs_inline = MLX5_ARG_UNSET;
2239         config->mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
2240         config->mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
2241         config->mprq.log_stride_num = MLX5_MPRQ_DEFAULT_LOG_STRIDE_NUM;
2242         config->log_hp_size = MLX5_ARG_UNSET;
2243         config->std_delay_drop = 0;
2244         config->hp_delay_drop = 0;
2245         if (mkvlist != NULL) {
2246                 /* Process parameters. */
2247                 ret = mlx5_kvargs_process(mkvlist, params,
2248                                           mlx5_port_args_check_handler, config);
2249                 if (ret) {
2250                         DRV_LOG(ERR, "Failed to process port arguments: %s",
2251                                 strerror(rte_errno));
2252                         return -rte_errno;
2253                 }
2254         }
2255         /* Adjust parameters according to device capabilities. */
2256         if (config->hw_padding && !dev_cap->hw_padding) {
2257                 DRV_LOG(DEBUG, "Rx end alignment padding isn't supported.");
2258                 config->hw_padding = 0;
2259         } else if (config->hw_padding) {
2260                 DRV_LOG(DEBUG, "Rx end alignment padding is enabled.");
2261         }
2262         /*
2263          * MPW is disabled by default, while the Enhanced MPW is enabled
2264          * by default.
2265          */
2266         if (config->mps == MLX5_ARG_UNSET)
2267                 config->mps = (dev_cap->mps == MLX5_MPW_ENHANCED) ?
2268                               MLX5_MPW_ENHANCED : MLX5_MPW_DISABLED;
2269         else
2270                 config->mps = config->mps ? dev_cap->mps : MLX5_MPW_DISABLED;
2271         DRV_LOG(INFO, "%sMPS is %s",
2272                 config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
2273                 config->mps == MLX5_MPW ? "legacy " : "",
2274                 config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
2275         /* LRO is supported only when DV flow enabled. */
2276         if (dev_cap->lro_supported && !priv->sh->config.dv_flow_en)
2277                 dev_cap->lro_supported = 0;
2278         if (dev_cap->lro_supported) {
2279                 /*
2280                  * If LRO timeout is not configured by application,
2281                  * use the minimal supported value.
2282                  */
2283                 if (!config->lro_timeout)
2284                         config->lro_timeout =
2285                                        hca_attr->lro_timer_supported_periods[0];
2286                 DRV_LOG(DEBUG, "LRO session timeout set to %d usec.",
2287                         config->lro_timeout);
2288         }
2289         if (config->cqe_comp && !dev_cap->cqe_comp) {
2290                 DRV_LOG(WARNING, "Rx CQE 128B compression is not supported.");
2291                 config->cqe_comp = 0;
2292         }
2293         if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
2294             (!devx || !hca_attr->mini_cqe_resp_flow_tag)) {
2295                 DRV_LOG(WARNING,
2296                         "Flow Tag CQE compression format isn't supported.");
2297                 config->cqe_comp = 0;
2298         }
2299         if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
2300             (!devx || !hca_attr->mini_cqe_resp_l3_l4_tag)) {
2301                 DRV_LOG(WARNING,
2302                         "L3/L4 Header CQE compression format isn't supported.");
2303                 config->cqe_comp = 0;
2304         }
2305         DRV_LOG(DEBUG, "Rx CQE compression is %ssupported.",
2306                 config->cqe_comp ? "" : "not ");
2307         if ((config->std_delay_drop || config->hp_delay_drop) &&
2308             !dev_cap->rq_delay_drop_en) {
2309                 config->std_delay_drop = 0;
2310                 config->hp_delay_drop = 0;
2311                 DRV_LOG(WARNING, "dev_port-%u: Rxq delay drop isn't supported.",
2312                         priv->dev_port);
2313         }
2314         if (config->mprq.enabled && !priv->sh->dev_cap.mprq.enabled) {
2315                 DRV_LOG(WARNING, "Multi-Packet RQ isn't supported.");
2316                 config->mprq.enabled = 0;
2317         }
2318         if (config->max_dump_files_num == 0)
2319                 config->max_dump_files_num = 128;
2320         /* Detect minimal data bytes to inline. */
2321         mlx5_set_min_inline(priv);
2322         DRV_LOG(DEBUG, "VLAN insertion in WQE is %ssupported.",
2323                 config->hw_vlan_insert ? "" : "not ");
2324         DRV_LOG(DEBUG, "\"rxq_pkt_pad_en\" is %u.", config->hw_padding);
2325         DRV_LOG(DEBUG, "\"rxq_cqe_comp_en\" is %u.", config->cqe_comp);
2326         DRV_LOG(DEBUG, "\"cqe_comp_fmt\" is %u.", config->cqe_comp_fmt);
2327         DRV_LOG(DEBUG, "\"rx_vec_en\" is %u.", config->rx_vec_en);
2328         DRV_LOG(DEBUG, "Standard \"delay_drop\" is %u.",
2329                 config->std_delay_drop);
2330         DRV_LOG(DEBUG, "Hairpin \"delay_drop\" is %u.", config->hp_delay_drop);
2331         DRV_LOG(DEBUG, "\"max_dump_files_num\" is %u.",
2332                 config->max_dump_files_num);
2333         DRV_LOG(DEBUG, "\"log_hp_size\" is %u.", config->log_hp_size);
2334         DRV_LOG(DEBUG, "\"mprq_en\" is %u.", config->mprq.enabled);
2335         DRV_LOG(DEBUG, "\"mprq_log_stride_num\" is %u.",
2336                 config->mprq.log_stride_num);
2337         DRV_LOG(DEBUG, "\"mprq_log_stride_size\" is %u.",
2338                 config->mprq.log_stride_size);
2339         DRV_LOG(DEBUG, "\"mprq_max_memcpy_len\" is %u.",
2340                 config->mprq.max_memcpy_len);
2341         DRV_LOG(DEBUG, "\"rxqs_min_mprq\" is %u.", config->mprq.min_rxqs_num);
2342         DRV_LOG(DEBUG, "\"lro_timeout_usec\" is %u.", config->lro_timeout);
2343         DRV_LOG(DEBUG, "\"txq_mpw_en\" is %d.", config->mps);
2344         DRV_LOG(DEBUG, "\"txqs_min_inline\" is %d.", config->txqs_inline);
2345         DRV_LOG(DEBUG, "\"txq_inline_min\" is %d.", config->txq_inline_min);
2346         DRV_LOG(DEBUG, "\"txq_inline_max\" is %d.", config->txq_inline_max);
2347         DRV_LOG(DEBUG, "\"txq_inline_mpw\" is %d.", config->txq_inline_mpw);
2348         return 0;
2349 }
2350
2351 /**
2352  * Print the key for device argument.
2353  *
2354  * It is "dummy" handler whose whole purpose is to enable using
2355  * mlx5_kvargs_process() function which set devargs as used.
2356  *
2357  * @param key
2358  *   Key argument.
2359  * @param val
2360  *   Value associated with key, unused.
2361  * @param opaque
2362  *   Unused, can be NULL.
2363  *
2364  * @return
2365  *   0 on success, function cannot fail.
2366  */
2367 static int
2368 mlx5_dummy_handler(const char *key, const char *val, void *opaque)
2369 {
2370         DRV_LOG(DEBUG, "\tKey: \"%s\" is set as used.", key);
2371         RTE_SET_USED(opaque);
2372         RTE_SET_USED(val);
2373         return 0;
2374 }
2375
2376 /**
2377  * Set requested devargs as used when device is already spawned.
2378  *
2379  * It is necessary since it is valid to ask probe again for existing device,
2380  * if its devargs don't assign as used, mlx5_kvargs_validate() will fail.
2381  *
2382  * @param name
2383  *   Name of the existing device.
2384  * @param port_id
2385  *   Port identifier of the device.
2386  * @param mkvlist
2387  *   Pointer to mlx5 kvargs control to sign as used.
2388  */
2389 void
2390 mlx5_port_args_set_used(const char *name, uint16_t port_id,
2391                         struct mlx5_kvargs_ctrl *mkvlist)
2392 {
2393         const char **params = (const char *[]){
2394                 MLX5_RXQ_CQE_COMP_EN,
2395                 MLX5_RXQ_PKT_PAD_EN,
2396                 MLX5_RX_MPRQ_EN,
2397                 MLX5_RX_MPRQ_LOG_STRIDE_NUM,
2398                 MLX5_RX_MPRQ_LOG_STRIDE_SIZE,
2399                 MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
2400                 MLX5_RXQS_MIN_MPRQ,
2401                 MLX5_TXQ_INLINE,
2402                 MLX5_TXQ_INLINE_MIN,
2403                 MLX5_TXQ_INLINE_MAX,
2404                 MLX5_TXQ_INLINE_MPW,
2405                 MLX5_TXQS_MIN_INLINE,
2406                 MLX5_TXQS_MAX_VEC,
2407                 MLX5_TXQ_MPW_EN,
2408                 MLX5_TXQ_MPW_HDR_DSEG_EN,
2409                 MLX5_TXQ_MAX_INLINE_LEN,
2410                 MLX5_TX_VEC_EN,
2411                 MLX5_RX_VEC_EN,
2412                 MLX5_REPRESENTOR,
2413                 MLX5_MAX_DUMP_FILES_NUM,
2414                 MLX5_LRO_TIMEOUT_USEC,
2415                 MLX5_HP_BUF_SIZE,
2416                 MLX5_DELAY_DROP,
2417                 NULL,
2418         };
2419
2420         /* Secondary process should not handle devargs. */
2421         if (rte_eal_process_type() != RTE_PROC_PRIMARY)
2422                 return;
2423         MLX5_ASSERT(mkvlist != NULL);
2424         DRV_LOG(DEBUG, "Ethernet device \"%s\" for port %u "
2425                 "already exists, set devargs as used:", name, port_id);
2426         /* This function cannot fail with this handler. */
2427         mlx5_kvargs_process(mkvlist, params, mlx5_dummy_handler, NULL);
2428 }
2429
2430 /**
2431  * Check sibling device configurations when probing again.
2432  *
2433  * Sibling devices sharing infiniband device context should have compatible
2434  * configurations. This regards representors and bonding device.
2435  *
2436  * @param cdev
2437  *   Pointer to mlx5 device structure.
2438  * @param mkvlist
2439  *   Pointer to mlx5 kvargs control, can be NULL if there is no devargs.
2440  *
2441  * @return
2442  *   0 on success, a negative errno value otherwise and rte_errno is set.
2443  */
2444 int
2445 mlx5_probe_again_args_validate(struct mlx5_common_device *cdev,
2446                                struct mlx5_kvargs_ctrl *mkvlist)
2447 {
2448         struct mlx5_dev_ctx_shared *sh = NULL;
2449         struct mlx5_sh_config *config;
2450         int ret;
2451
2452         /* Secondary process should not handle devargs. */
2453         if (rte_eal_process_type() != RTE_PROC_PRIMARY)
2454                 return 0;
2455         pthread_mutex_lock(&mlx5_dev_ctx_list_mutex);
2456         /* Search for IB context by common device pointer. */
2457         LIST_FOREACH(sh, &mlx5_dev_ctx_list, next)
2458                 if (sh->cdev == cdev)
2459                         break;
2460         pthread_mutex_unlock(&mlx5_dev_ctx_list_mutex);
2461         /* There is sh for this device -> it isn't probe again. */
2462         if (sh == NULL)
2463                 return 0;
2464         config = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
2465                              sizeof(struct mlx5_sh_config),
2466                              RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
2467         if (config == NULL) {
2468                 rte_errno = -ENOMEM;
2469                 return -rte_errno;
2470         }
2471         /*
2472          * Creates a temporary IB context configure structure according to new
2473          * devargs attached in probing again.
2474          */
2475         ret = mlx5_shared_dev_ctx_args_config(sh, mkvlist, config);
2476         if (ret) {
2477                 DRV_LOG(ERR, "Failed to process device configure: %s",
2478                         strerror(rte_errno));
2479                 mlx5_free(config);
2480                 return ret;
2481         }
2482         /*
2483          * Checks the match between the temporary structure and the existing
2484          * IB context structure.
2485          */
2486         if (sh->config.dv_flow_en ^ config->dv_flow_en) {
2487                 DRV_LOG(ERR, "\"dv_flow_en\" "
2488                         "configuration mismatch for shared %s context.",
2489                         sh->ibdev_name);
2490                 goto error;
2491         }
2492         if ((sh->config.dv_xmeta_en ^ config->dv_xmeta_en) ||
2493             (sh->config.dv_miss_info ^ config->dv_miss_info)) {
2494                 DRV_LOG(ERR, "\"dv_xmeta_en\" "
2495                         "configuration mismatch for shared %s context.",
2496                         sh->ibdev_name);
2497                 goto error;
2498         }
2499         if (sh->config.dv_esw_en ^ config->dv_esw_en) {
2500                 DRV_LOG(ERR, "\"dv_esw_en\" "
2501                         "configuration mismatch for shared %s context.",
2502                         sh->ibdev_name);
2503                 goto error;
2504         }
2505         if (sh->config.reclaim_mode ^ config->reclaim_mode) {
2506                 DRV_LOG(ERR, "\"reclaim_mode\" "
2507                         "configuration mismatch for shared %s context.",
2508                         sh->ibdev_name);
2509                 goto error;
2510         }
2511         if (sh->config.allow_duplicate_pattern ^
2512             config->allow_duplicate_pattern) {
2513                 DRV_LOG(ERR, "\"allow_duplicate_pattern\" "
2514                         "configuration mismatch for shared %s context.",
2515                         sh->ibdev_name);
2516                 goto error;
2517         }
2518         if (sh->config.l3_vxlan_en ^ config->l3_vxlan_en) {
2519                 DRV_LOG(ERR, "\"l3_vxlan_en\" "
2520                         "configuration mismatch for shared %s context.",
2521                         sh->ibdev_name);
2522                 goto error;
2523         }
2524         if (sh->config.decap_en ^ config->decap_en) {
2525                 DRV_LOG(ERR, "\"decap_en\" "
2526                         "configuration mismatch for shared %s context.",
2527                         sh->ibdev_name);
2528                 goto error;
2529         }
2530         if (sh->config.lacp_by_user ^ config->lacp_by_user) {
2531                 DRV_LOG(ERR, "\"lacp_by_user\" "
2532                         "configuration mismatch for shared %s context.",
2533                         sh->ibdev_name);
2534                 goto error;
2535         }
2536         if (sh->config.tx_pp ^ config->tx_pp) {
2537                 DRV_LOG(ERR, "\"tx_pp\" "
2538                         "configuration mismatch for shared %s context.",
2539                         sh->ibdev_name);
2540                 goto error;
2541         }
2542         if (sh->config.tx_skew ^ config->tx_skew) {
2543                 DRV_LOG(ERR, "\"tx_skew\" "
2544                         "configuration mismatch for shared %s context.",
2545                         sh->ibdev_name);
2546                 goto error;
2547         }
2548         mlx5_free(config);
2549         return 0;
2550 error:
2551         mlx5_free(config);
2552         rte_errno = EINVAL;
2553         return -rte_errno;
2554 }
2555
2556 /**
2557  * Configures the minimal amount of data to inline into WQE
2558  * while sending packets.
2559  *
2560  * - the txq_inline_min has the maximal priority, if this
2561  *   key is specified in devargs
2562  * - if DevX is enabled the inline mode is queried from the
2563  *   device (HCA attributes and NIC vport context if needed).
2564  * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4 Lx
2565  *   and none (0 bytes) for other NICs
2566  *
2567  * @param priv
2568  *   Pointer to the private device data structure.
2569  */
2570 void
2571 mlx5_set_min_inline(struct mlx5_priv *priv)
2572 {
2573         struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
2574         struct mlx5_port_config *config = &priv->config;
2575
2576         if (config->txq_inline_min != MLX5_ARG_UNSET) {
2577                 /* Application defines size of inlined data explicitly. */
2578                 if (priv->pci_dev != NULL) {
2579                         switch (priv->pci_dev->id.device_id) {
2580                         case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
2581                         case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
2582                                 if (config->txq_inline_min <
2583                                                (int)MLX5_INLINE_HSIZE_L2) {
2584                                         DRV_LOG(DEBUG,
2585                                                 "txq_inline_mix aligned to minimal ConnectX-4 required value %d",
2586                                                 (int)MLX5_INLINE_HSIZE_L2);
2587                                         config->txq_inline_min =
2588                                                         MLX5_INLINE_HSIZE_L2;
2589                                 }
2590                                 break;
2591                         }
2592                 }
2593                 goto exit;
2594         }
2595         if (hca_attr->eth_net_offloads) {
2596                 /* We have DevX enabled, inline mode queried successfully. */
2597                 switch (hca_attr->wqe_inline_mode) {
2598                 case MLX5_CAP_INLINE_MODE_L2:
2599                         /* outer L2 header must be inlined. */
2600                         config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
2601                         goto exit;
2602                 case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
2603                         /* No inline data are required by NIC. */
2604                         config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2605                         config->hw_vlan_insert =
2606                                 hca_attr->wqe_vlan_insert;
2607                         DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
2608                         goto exit;
2609                 case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
2610                         /* inline mode is defined by NIC vport context. */
2611                         if (!hca_attr->eth_virt)
2612                                 break;
2613                         switch (hca_attr->vport_inline_mode) {
2614                         case MLX5_INLINE_MODE_NONE:
2615                                 config->txq_inline_min =
2616                                         MLX5_INLINE_HSIZE_NONE;
2617                                 goto exit;
2618                         case MLX5_INLINE_MODE_L2:
2619                                 config->txq_inline_min =
2620                                         MLX5_INLINE_HSIZE_L2;
2621                                 goto exit;
2622                         case MLX5_INLINE_MODE_IP:
2623                                 config->txq_inline_min =
2624                                         MLX5_INLINE_HSIZE_L3;
2625                                 goto exit;
2626                         case MLX5_INLINE_MODE_TCP_UDP:
2627                                 config->txq_inline_min =
2628                                         MLX5_INLINE_HSIZE_L4;
2629                                 goto exit;
2630                         case MLX5_INLINE_MODE_INNER_L2:
2631                                 config->txq_inline_min =
2632                                         MLX5_INLINE_HSIZE_INNER_L2;
2633                                 goto exit;
2634                         case MLX5_INLINE_MODE_INNER_IP:
2635                                 config->txq_inline_min =
2636                                         MLX5_INLINE_HSIZE_INNER_L3;
2637                                 goto exit;
2638                         case MLX5_INLINE_MODE_INNER_TCP_UDP:
2639                                 config->txq_inline_min =
2640                                         MLX5_INLINE_HSIZE_INNER_L4;
2641                                 goto exit;
2642                         }
2643                 }
2644         }
2645         if (priv->pci_dev == NULL) {
2646                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2647                 goto exit;
2648         }
2649         /*
2650          * We get here if we are unable to deduce
2651          * inline data size with DevX. Try PCI ID
2652          * to determine old NICs.
2653          */
2654         switch (priv->pci_dev->id.device_id) {
2655         case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
2656         case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
2657         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
2658         case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
2659                 config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
2660                 config->hw_vlan_insert = 0;
2661                 break;
2662         case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
2663         case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
2664         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
2665         case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
2666                 /*
2667                  * These NICs support VLAN insertion from WQE and
2668                  * report the wqe_vlan_insert flag. But there is the bug
2669                  * and PFC control may be broken, so disable feature.
2670                  */
2671                 config->hw_vlan_insert = 0;
2672                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2673                 break;
2674         default:
2675                 config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
2676                 break;
2677         }
2678 exit:
2679         DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
2680 }
2681
2682 /**
2683  * Configures the metadata mask fields in the shared context.
2684  *
2685  * @param [in] dev
2686  *   Pointer to Ethernet device.
2687  */
2688 void
2689 mlx5_set_metadata_mask(struct rte_eth_dev *dev)
2690 {
2691         struct mlx5_priv *priv = dev->data->dev_private;
2692         struct mlx5_dev_ctx_shared *sh = priv->sh;
2693         uint32_t meta, mark, reg_c0;
2694
2695         reg_c0 = ~priv->vport_meta_mask;
2696         switch (sh->config.dv_xmeta_en) {
2697         case MLX5_XMETA_MODE_LEGACY:
2698                 meta = UINT32_MAX;
2699                 mark = MLX5_FLOW_MARK_MASK;
2700                 break;
2701         case MLX5_XMETA_MODE_META16:
2702                 meta = reg_c0 >> rte_bsf32(reg_c0);
2703                 mark = MLX5_FLOW_MARK_MASK;
2704                 break;
2705         case MLX5_XMETA_MODE_META32:
2706                 meta = UINT32_MAX;
2707                 mark = (reg_c0 >> rte_bsf32(reg_c0)) & MLX5_FLOW_MARK_MASK;
2708                 break;
2709         default:
2710                 meta = 0;
2711                 mark = 0;
2712                 MLX5_ASSERT(false);
2713                 break;
2714         }
2715         if (sh->dv_mark_mask && sh->dv_mark_mask != mark)
2716                 DRV_LOG(WARNING, "metadata MARK mask mismatch %08X:%08X",
2717                                  sh->dv_mark_mask, mark);
2718         else
2719                 sh->dv_mark_mask = mark;
2720         if (sh->dv_meta_mask && sh->dv_meta_mask != meta)
2721                 DRV_LOG(WARNING, "metadata META mask mismatch %08X:%08X",
2722                                  sh->dv_meta_mask, meta);
2723         else
2724                 sh->dv_meta_mask = meta;
2725         if (sh->dv_regc0_mask && sh->dv_regc0_mask != reg_c0)
2726                 DRV_LOG(WARNING, "metadata reg_c0 mask mismatch %08X:%08X",
2727                                  sh->dv_meta_mask, reg_c0);
2728         else
2729                 sh->dv_regc0_mask = reg_c0;
2730         DRV_LOG(DEBUG, "metadata mode %u", sh->config.dv_xmeta_en);
2731         DRV_LOG(DEBUG, "metadata MARK mask %08X", sh->dv_mark_mask);
2732         DRV_LOG(DEBUG, "metadata META mask %08X", sh->dv_meta_mask);
2733         DRV_LOG(DEBUG, "metadata reg_c0 mask %08X", sh->dv_regc0_mask);
2734 }
2735
2736 int
2737 rte_pmd_mlx5_get_dyn_flag_names(char *names[], unsigned int n)
2738 {
2739         static const char *const dynf_names[] = {
2740                 RTE_PMD_MLX5_FINE_GRANULARITY_INLINE,
2741                 RTE_MBUF_DYNFLAG_METADATA_NAME,
2742                 RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME
2743         };
2744         unsigned int i;
2745
2746         if (n < RTE_DIM(dynf_names))
2747                 return -ENOMEM;
2748         for (i = 0; i < RTE_DIM(dynf_names); i++) {
2749                 if (names[i] == NULL)
2750                         return -EINVAL;
2751                 strcpy(names[i], dynf_names[i]);
2752         }
2753         return RTE_DIM(dynf_names);
2754 }
2755
2756 /**
2757  * Look for the ethernet device belonging to mlx5 driver.
2758  *
2759  * @param[in] port_id
2760  *   port_id to start looking for device.
2761  * @param[in] odev
2762  *   Pointer to the hint device. When device is being probed
2763  *   the its siblings (master and preceding representors might
2764  *   not have assigned driver yet (because the mlx5_os_pci_probe()
2765  *   is not completed yet, for this case match on hint
2766  *   device may be used to detect sibling device.
2767  *
2768  * @return
2769  *   port_id of found device, RTE_MAX_ETHPORT if not found.
2770  */
2771 uint16_t
2772 mlx5_eth_find_next(uint16_t port_id, struct rte_device *odev)
2773 {
2774         while (port_id < RTE_MAX_ETHPORTS) {
2775                 struct rte_eth_dev *dev = &rte_eth_devices[port_id];
2776
2777                 if (dev->state != RTE_ETH_DEV_UNUSED &&
2778                     dev->device &&
2779                     (dev->device == odev ||
2780                      (dev->device->driver &&
2781                      dev->device->driver->name &&
2782                      ((strcmp(dev->device->driver->name,
2783                               MLX5_PCI_DRIVER_NAME) == 0) ||
2784                       (strcmp(dev->device->driver->name,
2785                               MLX5_AUXILIARY_DRIVER_NAME) == 0)))))
2786                         break;
2787                 port_id++;
2788         }
2789         if (port_id >= RTE_MAX_ETHPORTS)
2790                 return RTE_MAX_ETHPORTS;
2791         return port_id;
2792 }
2793
2794 /**
2795  * Callback to remove a device.
2796  *
2797  * This function removes all Ethernet devices belong to a given device.
2798  *
2799  * @param[in] cdev
2800  *   Pointer to the generic device.
2801  *
2802  * @return
2803  *   0 on success, the function cannot fail.
2804  */
2805 int
2806 mlx5_net_remove(struct mlx5_common_device *cdev)
2807 {
2808         uint16_t port_id;
2809         int ret = 0;
2810
2811         RTE_ETH_FOREACH_DEV_OF(port_id, cdev->dev) {
2812                 /*
2813                  * mlx5_dev_close() is not registered to secondary process,
2814                  * call the close function explicitly for secondary process.
2815                  */
2816                 if (rte_eal_process_type() == RTE_PROC_SECONDARY)
2817                         ret |= mlx5_dev_close(&rte_eth_devices[port_id]);
2818                 else
2819                         ret |= rte_eth_dev_close(port_id);
2820         }
2821         return ret == 0 ? 0 : -EIO;
2822 }
2823
2824 static const struct rte_pci_id mlx5_pci_id_map[] = {
2825         {
2826                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2827                                PCI_DEVICE_ID_MELLANOX_CONNECTX4)
2828         },
2829         {
2830                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2831                                PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
2832         },
2833         {
2834                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2835                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
2836         },
2837         {
2838                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2839                                PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
2840         },
2841         {
2842                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2843                                PCI_DEVICE_ID_MELLANOX_CONNECTX5)
2844         },
2845         {
2846                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2847                                PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
2848         },
2849         {
2850                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2851                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
2852         },
2853         {
2854                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2855                                PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
2856         },
2857         {
2858                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2859                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
2860         },
2861         {
2862                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2863                                PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
2864         },
2865         {
2866                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2867                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6)
2868         },
2869         {
2870                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2871                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
2872         },
2873         {
2874                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2875                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6DX)
2876         },
2877         {
2878                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2879                                 PCI_DEVICE_ID_MELLANOX_CONNECTXVF)
2880         },
2881         {
2882                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2883                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF)
2884         },
2885         {
2886                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2887                                 PCI_DEVICE_ID_MELLANOX_CONNECTX6LX)
2888         },
2889         {
2890                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2891                                 PCI_DEVICE_ID_MELLANOX_CONNECTX7)
2892         },
2893         {
2894                 RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
2895                                 PCI_DEVICE_ID_MELLANOX_CONNECTX7BF)
2896         },
2897         {
2898                 .vendor_id = 0
2899         }
2900 };
2901
2902 static struct mlx5_class_driver mlx5_net_driver = {
2903         .drv_class = MLX5_CLASS_ETH,
2904         .name = RTE_STR(MLX5_ETH_DRIVER_NAME),
2905         .id_table = mlx5_pci_id_map,
2906         .probe = mlx5_os_net_probe,
2907         .remove = mlx5_net_remove,
2908         .probe_again = 1,
2909         .intr_lsc = 1,
2910         .intr_rmv = 1,
2911 };
2912
2913 /* Initialize driver log type. */
2914 RTE_LOG_REGISTER_DEFAULT(mlx5_logtype, NOTICE)
2915
2916 /**
2917  * Driver initialization routine.
2918  */
2919 RTE_INIT(rte_mlx5_pmd_init)
2920 {
2921         pthread_mutex_init(&mlx5_dev_ctx_list_mutex, NULL);
2922         mlx5_common_init();
2923         /* Build the static tables for Verbs conversion. */
2924         mlx5_set_ptype_table();
2925         mlx5_set_cksum_table();
2926         mlx5_set_swp_types_table();
2927         if (mlx5_glue)
2928                 mlx5_class_driver_register(&mlx5_net_driver);
2929 }
2930
2931 RTE_PMD_EXPORT_NAME(MLX5_ETH_DRIVER_NAME, __COUNTER__);
2932 RTE_PMD_REGISTER_PCI_TABLE(MLX5_ETH_DRIVER_NAME, mlx5_pci_id_map);
2933 RTE_PMD_REGISTER_KMOD_DEP(MLX5_ETH_DRIVER_NAME, "* ib_uverbs & mlx5_core & mlx5_ib");