1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2020 Mellanox Technologies, Ltd
10 #include <sys/queue.h>
12 #include <rte_malloc.h>
13 #include <rte_common.h>
14 #include <rte_eal_paging.h>
16 #include <mlx5_glue.h>
17 #include <mlx5_devx_cmds.h>
18 #include <mlx5_common_devx.h>
19 #include <mlx5_malloc.h>
22 #include "mlx5_common_os.h"
25 #include "mlx5_utils.h"
26 #include "mlx5_devx.h"
27 #include "mlx5_flow.h"
28 #include "mlx5_flow_os.h"
31 * Modify RQ vlan stripping offload
37 * 0 on success, non-0 otherwise
40 mlx5_rxq_obj_modify_rq_vlan_strip(struct mlx5_rxq_obj *rxq_obj, int on)
42 struct mlx5_devx_modify_rq_attr rq_attr;
44 memset(&rq_attr, 0, sizeof(rq_attr));
45 rq_attr.rq_state = MLX5_RQC_STATE_RDY;
46 rq_attr.state = MLX5_RQC_STATE_RDY;
47 rq_attr.vsd = (on ? 0 : 1);
48 rq_attr.modify_bitmask = MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD;
49 return mlx5_devx_cmd_modify_rq(rxq_obj->rq_obj.rq, &rq_attr);
53 * Modify RQ using DevX API.
56 * DevX Rx queue object.
58 * Type of change queue state.
61 * 0 on success, a negative errno value otherwise and rte_errno is set.
64 mlx5_devx_modify_rq(struct mlx5_rxq_obj *rxq_obj, uint8_t type)
66 struct mlx5_devx_modify_rq_attr rq_attr;
68 memset(&rq_attr, 0, sizeof(rq_attr));
70 case MLX5_RXQ_MOD_ERR2RST:
71 rq_attr.rq_state = MLX5_RQC_STATE_ERR;
72 rq_attr.state = MLX5_RQC_STATE_RST;
74 case MLX5_RXQ_MOD_RST2RDY:
75 rq_attr.rq_state = MLX5_RQC_STATE_RST;
76 rq_attr.state = MLX5_RQC_STATE_RDY;
78 case MLX5_RXQ_MOD_RDY2ERR:
79 rq_attr.rq_state = MLX5_RQC_STATE_RDY;
80 rq_attr.state = MLX5_RQC_STATE_ERR;
82 case MLX5_RXQ_MOD_RDY2RST:
83 rq_attr.rq_state = MLX5_RQC_STATE_RDY;
84 rq_attr.state = MLX5_RQC_STATE_RST;
89 return mlx5_devx_cmd_modify_rq(rxq_obj->rq_obj.rq, &rq_attr);
93 * Modify SQ using DevX API.
96 * DevX Tx queue object.
98 * Type of change queue state.
103 * 0 on success, a negative errno value otherwise and rte_errno is set.
106 mlx5_devx_modify_sq(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
109 struct mlx5_devx_modify_sq_attr msq_attr = { 0 };
112 if (type != MLX5_TXQ_MOD_RST2RDY) {
113 /* Change queue state to reset. */
114 if (type == MLX5_TXQ_MOD_ERR2RDY)
115 msq_attr.sq_state = MLX5_SQC_STATE_ERR;
117 msq_attr.sq_state = MLX5_SQC_STATE_RDY;
118 msq_attr.state = MLX5_SQC_STATE_RST;
119 ret = mlx5_devx_cmd_modify_sq(obj->sq_obj.sq, &msq_attr);
121 DRV_LOG(ERR, "Cannot change the Tx SQ state to RESET"
122 " %s", strerror(errno));
127 if (type != MLX5_TXQ_MOD_RDY2RST) {
128 /* Change queue state to ready. */
129 msq_attr.sq_state = MLX5_SQC_STATE_RST;
130 msq_attr.state = MLX5_SQC_STATE_RDY;
131 ret = mlx5_devx_cmd_modify_sq(obj->sq_obj.sq, &msq_attr);
133 DRV_LOG(ERR, "Cannot change the Tx SQ state to READY"
134 " %s", strerror(errno));
140 * The dev_port variable is relevant only in Verbs API, and there is a
141 * pointer that points to this function and a parallel function in verbs
142 * intermittently, so they should have the same parameters.
149 * Destroy the Rx queue DevX object.
152 * Rxq object to destroy.
155 mlx5_rxq_release_devx_resources(struct mlx5_rxq_obj *rxq_obj)
157 mlx5_devx_rq_destroy(&rxq_obj->rq_obj);
158 memset(&rxq_obj->rq_obj, 0, sizeof(rxq_obj->rq_obj));
159 mlx5_devx_cq_destroy(&rxq_obj->cq_obj);
160 memset(&rxq_obj->cq_obj, 0, sizeof(rxq_obj->cq_obj));
164 * Release an Rx DevX queue object.
167 * DevX Rx queue object.
170 mlx5_rxq_devx_obj_release(struct mlx5_rxq_obj *rxq_obj)
172 MLX5_ASSERT(rxq_obj);
173 if (rxq_obj->rxq_ctrl->type == MLX5_RXQ_TYPE_HAIRPIN) {
174 MLX5_ASSERT(rxq_obj->rq);
175 mlx5_devx_modify_rq(rxq_obj, MLX5_RXQ_MOD_RDY2RST);
176 claim_zero(mlx5_devx_cmd_destroy(rxq_obj->rq));
178 MLX5_ASSERT(rxq_obj->cq_obj.cq);
179 MLX5_ASSERT(rxq_obj->rq_obj.rq);
180 mlx5_rxq_release_devx_resources(rxq_obj);
181 if (rxq_obj->devx_channel)
182 mlx5_os_devx_destroy_event_channel
183 (rxq_obj->devx_channel);
188 * Get event for an Rx DevX queue object.
191 * DevX Rx queue object.
194 * 0 on success, a negative errno value otherwise and rte_errno is set.
197 mlx5_rx_devx_get_event(struct mlx5_rxq_obj *rxq_obj)
199 #ifdef HAVE_IBV_DEVX_EVENT
201 struct mlx5dv_devx_async_event_hdr event_resp;
202 uint8_t buf[sizeof(struct mlx5dv_devx_async_event_hdr) + 128];
204 int ret = mlx5_glue->devx_get_event(rxq_obj->devx_channel,
212 if (out.event_resp.cookie != (uint64_t)(uintptr_t)rxq_obj->cq_obj.cq) {
221 #endif /* HAVE_IBV_DEVX_EVENT */
225 * Create a RQ object using DevX.
228 * Pointer to Ethernet device.
230 * Queue index in DPDK Rx queue array.
233 * 0 on success, a negative errno value otherwise and rte_errno is set.
236 mlx5_rxq_create_devx_rq_resources(struct rte_eth_dev *dev, uint16_t idx)
238 struct mlx5_priv *priv = dev->data->dev_private;
239 struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
240 struct mlx5_rxq_ctrl *rxq_ctrl =
241 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
242 struct mlx5_devx_create_rq_attr rq_attr = { 0 };
243 uint16_t log_desc_n = rxq_data->elts_n - rxq_data->sges_n;
244 uint32_t wqe_size, log_wqe_size;
246 /* Fill RQ attributes. */
247 rq_attr.mem_rq_type = MLX5_RQC_MEM_RQ_TYPE_MEMORY_RQ_INLINE;
248 rq_attr.flush_in_error_en = 1;
249 rq_attr.vsd = (rxq_data->vlan_strip) ? 0 : 1;
250 rq_attr.cqn = rxq_ctrl->obj->cq_obj.cq->id;
251 rq_attr.scatter_fcs = (rxq_data->crc_present) ? 1 : 0;
252 rq_attr.ts_format = mlx5_ts_format_conv(priv->sh->rq_ts_format);
253 /* Fill WQ attributes for this RQ. */
254 if (mlx5_rxq_mprq_enabled(rxq_data)) {
255 rq_attr.wq_attr.wq_type = MLX5_WQ_TYPE_CYCLIC_STRIDING_RQ;
257 * Number of strides in each WQE:
258 * 512*2^single_wqe_log_num_of_strides.
260 rq_attr.wq_attr.single_wqe_log_num_of_strides =
261 rxq_data->strd_num_n -
262 MLX5_MIN_SINGLE_WQE_LOG_NUM_STRIDES;
263 /* Stride size = (2^single_stride_log_num_of_bytes)*64B. */
264 rq_attr.wq_attr.single_stride_log_num_of_bytes =
265 rxq_data->strd_sz_n -
266 MLX5_MIN_SINGLE_STRIDE_LOG_NUM_BYTES;
267 wqe_size = sizeof(struct mlx5_wqe_mprq);
269 rq_attr.wq_attr.wq_type = MLX5_WQ_TYPE_CYCLIC;
270 wqe_size = sizeof(struct mlx5_wqe_data_seg);
272 log_wqe_size = log2above(wqe_size) + rxq_data->sges_n;
273 wqe_size = 1 << log_wqe_size; /* round up power of two.*/
274 rq_attr.wq_attr.log_wq_stride = log_wqe_size;
275 rq_attr.wq_attr.log_wq_sz = log_desc_n;
276 rq_attr.wq_attr.end_padding_mode = priv->config.hw_padding ?
277 MLX5_WQ_END_PAD_MODE_ALIGN :
278 MLX5_WQ_END_PAD_MODE_NONE;
279 rq_attr.wq_attr.pd = priv->sh->cdev->pdn;
280 rq_attr.counter_set_id = priv->counter_set_id;
281 /* Create RQ using DevX API. */
282 return mlx5_devx_rq_create(priv->sh->cdev->ctx, &rxq_ctrl->obj->rq_obj,
283 wqe_size, log_desc_n, &rq_attr,
288 * Create a DevX CQ object for an Rx queue.
291 * Pointer to Ethernet device.
293 * Queue index in DPDK Rx queue array.
296 * 0 on success, a negative errno value otherwise and rte_errno is set.
299 mlx5_rxq_create_devx_cq_resources(struct rte_eth_dev *dev, uint16_t idx)
301 struct mlx5_devx_cq *cq_obj = 0;
302 struct mlx5_devx_cq_attr cq_attr = { 0 };
303 struct mlx5_priv *priv = dev->data->dev_private;
304 struct mlx5_dev_ctx_shared *sh = priv->sh;
305 struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
306 struct mlx5_rxq_ctrl *rxq_ctrl =
307 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
308 unsigned int cqe_n = mlx5_rxq_cqe_num(rxq_data);
310 uint16_t event_nums[1] = { 0 };
313 if (priv->config.cqe_comp && !rxq_data->hw_timestamp &&
315 cq_attr.cqe_comp_en = 1u;
316 rxq_data->mcqe_format = priv->config.cqe_comp_fmt;
317 rxq_data->byte_mask = UINT32_MAX;
318 switch (priv->config.cqe_comp_fmt) {
319 case MLX5_CQE_RESP_FORMAT_HASH:
321 case MLX5_CQE_RESP_FORMAT_CSUM:
323 * Select CSUM miniCQE format only for non-vectorized
324 * MPRQ Rx burst, use HASH miniCQE format for others.
326 if (mlx5_rxq_check_vec_support(rxq_data) < 0 &&
327 mlx5_rxq_mprq_enabled(rxq_data))
328 cq_attr.mini_cqe_res_format =
329 MLX5_CQE_RESP_FORMAT_CSUM_STRIDX;
331 cq_attr.mini_cqe_res_format =
332 MLX5_CQE_RESP_FORMAT_HASH;
333 rxq_data->mcqe_format = cq_attr.mini_cqe_res_format;
335 case MLX5_CQE_RESP_FORMAT_FTAG_STRIDX:
336 rxq_data->byte_mask = MLX5_LEN_WITH_MARK_MASK;
338 case MLX5_CQE_RESP_FORMAT_CSUM_STRIDX:
339 cq_attr.mini_cqe_res_format = priv->config.cqe_comp_fmt;
341 case MLX5_CQE_RESP_FORMAT_L34H_STRIDX:
342 cq_attr.mini_cqe_res_format = 0;
343 cq_attr.mini_cqe_res_format_ext = 1;
347 "Port %u Rx CQE compression is enabled, format %d.",
348 dev->data->port_id, priv->config.cqe_comp_fmt);
350 * For vectorized Rx, it must not be doubled in order to
351 * make cq_ci and rq_ci aligned.
353 if (mlx5_rxq_check_vec_support(rxq_data) < 0)
355 } else if (priv->config.cqe_comp && rxq_data->hw_timestamp) {
357 "Port %u Rx CQE compression is disabled for HW"
360 } else if (priv->config.cqe_comp && rxq_data->lro) {
362 "Port %u Rx CQE compression is disabled for LRO.",
365 cq_attr.uar_page_id = mlx5_os_get_devx_uar_page_id(sh->devx_rx_uar);
366 log_cqe_n = log2above(cqe_n);
367 /* Create CQ using DevX API. */
368 ret = mlx5_devx_cq_create(sh->cdev->ctx, &rxq_ctrl->obj->cq_obj,
369 log_cqe_n, &cq_attr, sh->numa_node);
372 cq_obj = &rxq_ctrl->obj->cq_obj;
373 rxq_data->cqes = (volatile struct mlx5_cqe (*)[])
374 (uintptr_t)cq_obj->cqes;
375 rxq_data->cq_db = cq_obj->db_rec;
376 rxq_data->cq_uar = mlx5_os_get_devx_uar_base_addr(sh->devx_rx_uar);
377 rxq_data->cqe_n = log_cqe_n;
378 rxq_data->cqn = cq_obj->cq->id;
379 if (rxq_ctrl->obj->devx_channel) {
380 ret = mlx5_os_devx_subscribe_devx_event
381 (rxq_ctrl->obj->devx_channel,
385 (uint64_t)(uintptr_t)cq_obj->cq);
387 DRV_LOG(ERR, "Fail to subscribe CQ to event channel.");
389 mlx5_devx_cq_destroy(cq_obj);
390 memset(cq_obj, 0, sizeof(*cq_obj));
399 * Create the Rx hairpin queue object.
402 * Pointer to Ethernet device.
404 * Queue index in DPDK Rx queue array.
407 * 0 on success, a negative errno value otherwise and rte_errno is set.
410 mlx5_rxq_obj_hairpin_new(struct rte_eth_dev *dev, uint16_t idx)
412 struct mlx5_priv *priv = dev->data->dev_private;
413 struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
414 struct mlx5_rxq_ctrl *rxq_ctrl =
415 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
416 struct mlx5_devx_create_rq_attr attr = { 0 };
417 struct mlx5_rxq_obj *tmpl = rxq_ctrl->obj;
418 uint32_t max_wq_data;
420 MLX5_ASSERT(rxq_data);
422 tmpl->rxq_ctrl = rxq_ctrl;
424 max_wq_data = priv->config.hca_attr.log_max_hairpin_wq_data_sz;
425 /* Jumbo frames > 9KB should be supported, and more packets. */
426 if (priv->config.log_hp_size != (uint32_t)MLX5_ARG_UNSET) {
427 if (priv->config.log_hp_size > max_wq_data) {
428 DRV_LOG(ERR, "Total data size %u power of 2 is "
429 "too large for hairpin.",
430 priv->config.log_hp_size);
434 attr.wq_attr.log_hairpin_data_sz = priv->config.log_hp_size;
436 attr.wq_attr.log_hairpin_data_sz =
437 (max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ?
438 max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE;
440 /* Set the packets number to the maximum value for performance. */
441 attr.wq_attr.log_hairpin_num_packets =
442 attr.wq_attr.log_hairpin_data_sz -
443 MLX5_HAIRPIN_QUEUE_STRIDE;
444 attr.counter_set_id = priv->counter_set_id;
445 tmpl->rq = mlx5_devx_cmd_create_rq(priv->sh->cdev->ctx, &attr,
449 "Port %u Rx hairpin queue %u can't create rq object.",
450 dev->data->port_id, idx);
454 dev->data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_HAIRPIN;
459 * Create the Rx queue DevX object.
462 * Pointer to Ethernet device.
464 * Queue index in DPDK Rx queue array.
467 * 0 on success, a negative errno value otherwise and rte_errno is set.
470 mlx5_rxq_devx_obj_new(struct rte_eth_dev *dev, uint16_t idx)
472 struct mlx5_priv *priv = dev->data->dev_private;
473 struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[idx];
474 struct mlx5_rxq_ctrl *rxq_ctrl =
475 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
476 struct mlx5_rxq_obj *tmpl = rxq_ctrl->obj;
479 MLX5_ASSERT(rxq_data);
481 if (rxq_ctrl->type == MLX5_RXQ_TYPE_HAIRPIN)
482 return mlx5_rxq_obj_hairpin_new(dev, idx);
483 tmpl->rxq_ctrl = rxq_ctrl;
486 MLX5DV_DEVX_CREATE_EVENT_CHANNEL_FLAGS_OMIT_EV_DATA;
488 tmpl->devx_channel = mlx5_os_devx_create_event_channel
489 (priv->sh->cdev->ctx,
491 if (!tmpl->devx_channel) {
493 DRV_LOG(ERR, "Failed to create event channel %d.",
497 tmpl->fd = mlx5_os_get_devx_channel_fd(tmpl->devx_channel);
499 /* Create CQ using DevX API. */
500 ret = mlx5_rxq_create_devx_cq_resources(dev, idx);
502 DRV_LOG(ERR, "Failed to create CQ.");
505 /* Create RQ using DevX API. */
506 ret = mlx5_rxq_create_devx_rq_resources(dev, idx);
508 DRV_LOG(ERR, "Port %u Rx queue %u RQ creation failure.",
509 dev->data->port_id, idx);
513 /* Change queue state to ready. */
514 ret = mlx5_devx_modify_rq(tmpl, MLX5_RXQ_MOD_RST2RDY);
517 rxq_data->wqes = (void *)(uintptr_t)tmpl->rq_obj.umem_buf;
518 rxq_data->rq_db = (uint32_t *)(uintptr_t)tmpl->rq_obj.db_rec;
519 rxq_data->cq_arm_sn = 0;
521 mlx5_rxq_initialize(rxq_data);
522 dev->data->rx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
523 rxq_ctrl->wqn = tmpl->rq_obj.rq->id;
526 ret = rte_errno; /* Save rte_errno before cleanup. */
527 mlx5_rxq_devx_obj_release(tmpl);
528 rte_errno = ret; /* Restore rte_errno. */
533 * Prepare RQT attribute structure for DevX RQT API.
536 * Pointer to Ethernet device.
538 * Log of number of queues in the array.
540 * DevX indirection table object.
543 * The RQT attr object initialized, NULL otherwise and rte_errno is set.
545 static struct mlx5_devx_rqt_attr *
546 mlx5_devx_ind_table_create_rqt_attr(struct rte_eth_dev *dev,
547 const unsigned int log_n,
548 const uint16_t *queues,
549 const uint32_t queues_n)
551 struct mlx5_priv *priv = dev->data->dev_private;
552 struct mlx5_devx_rqt_attr *rqt_attr = NULL;
553 const unsigned int rqt_n = 1 << log_n;
556 rqt_attr = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rqt_attr) +
557 rqt_n * sizeof(uint32_t), 0, SOCKET_ID_ANY);
559 DRV_LOG(ERR, "Port %u cannot allocate RQT resources.",
564 rqt_attr->rqt_max_size = priv->config.ind_table_max_size;
565 rqt_attr->rqt_actual_size = rqt_n;
566 for (i = 0; i != queues_n; ++i) {
567 struct mlx5_rxq_data *rxq = (*priv->rxqs)[queues[i]];
568 struct mlx5_rxq_ctrl *rxq_ctrl =
569 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
571 rqt_attr->rq_list[i] = rxq_ctrl->obj->rq_obj.rq->id;
574 for (j = 0; i != rqt_n; ++j, ++i)
575 rqt_attr->rq_list[i] = rqt_attr->rq_list[j];
580 * Create RQT using DevX API as a filed of indirection table.
583 * Pointer to Ethernet device.
585 * Log of number of queues in the array.
587 * DevX indirection table object.
590 * 0 on success, a negative errno value otherwise and rte_errno is set.
593 mlx5_devx_ind_table_new(struct rte_eth_dev *dev, const unsigned int log_n,
594 struct mlx5_ind_table_obj *ind_tbl)
596 struct mlx5_priv *priv = dev->data->dev_private;
597 struct mlx5_devx_rqt_attr *rqt_attr = NULL;
599 MLX5_ASSERT(ind_tbl);
600 rqt_attr = mlx5_devx_ind_table_create_rqt_attr(dev, log_n,
605 ind_tbl->rqt = mlx5_devx_cmd_create_rqt(priv->sh->cdev->ctx, rqt_attr);
608 DRV_LOG(ERR, "Port %u cannot create DevX RQT.",
617 * Modify RQT using DevX API as a filed of indirection table.
620 * Pointer to Ethernet device.
622 * Log of number of queues in the array.
624 * DevX indirection table object.
627 * 0 on success, a negative errno value otherwise and rte_errno is set.
630 mlx5_devx_ind_table_modify(struct rte_eth_dev *dev, const unsigned int log_n,
631 const uint16_t *queues, const uint32_t queues_n,
632 struct mlx5_ind_table_obj *ind_tbl)
635 struct mlx5_devx_rqt_attr *rqt_attr = NULL;
637 MLX5_ASSERT(ind_tbl);
638 rqt_attr = mlx5_devx_ind_table_create_rqt_attr(dev, log_n,
643 ret = mlx5_devx_cmd_modify_rqt(ind_tbl->rqt, rqt_attr);
646 DRV_LOG(ERR, "Port %u cannot modify DevX RQT.",
652 * Destroy the DevX RQT object.
655 * Indirection table to release.
658 mlx5_devx_ind_table_destroy(struct mlx5_ind_table_obj *ind_tbl)
660 claim_zero(mlx5_devx_cmd_destroy(ind_tbl->rqt));
664 * Set TIR attribute struct with relevant input values.
667 * Pointer to Ethernet device.
669 * RSS key for the Rx hash queue.
670 * @param[in] hash_fields
671 * Verbs protocol hash field to make the RSS on.
673 * Indirection table for TIR.
676 * @param[out] tir_attr
677 * Parameters structure for TIR creation/modification.
680 * The Verbs/DevX object initialised index, 0 otherwise and rte_errno is set.
683 mlx5_devx_tir_attr_set(struct rte_eth_dev *dev, const uint8_t *rss_key,
684 uint64_t hash_fields,
685 const struct mlx5_ind_table_obj *ind_tbl,
686 int tunnel, struct mlx5_devx_tir_attr *tir_attr)
688 struct mlx5_priv *priv = dev->data->dev_private;
689 struct mlx5_rxq_data *rxq_data = (*priv->rxqs)[ind_tbl->queues[0]];
690 struct mlx5_rxq_ctrl *rxq_ctrl =
691 container_of(rxq_data, struct mlx5_rxq_ctrl, rxq);
692 enum mlx5_rxq_type rxq_obj_type = rxq_ctrl->type;
696 /* Enable TIR LRO only if all the queues were configured for. */
697 for (i = 0; i < ind_tbl->queues_n; ++i) {
698 if (!(*priv->rxqs)[ind_tbl->queues[i]]->lro) {
703 memset(tir_attr, 0, sizeof(*tir_attr));
704 tir_attr->disp_type = MLX5_TIRC_DISP_TYPE_INDIRECT;
705 tir_attr->rx_hash_fn = MLX5_RX_HASH_FN_TOEPLITZ;
706 tir_attr->tunneled_offload_en = !!tunnel;
707 /* If needed, translate hash_fields bitmap to PRM format. */
709 struct mlx5_rx_hash_field_select *rx_hash_field_select =
710 #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
711 hash_fields & IBV_RX_HASH_INNER ?
712 &tir_attr->rx_hash_field_selector_inner :
714 &tir_attr->rx_hash_field_selector_outer;
715 /* 1 bit: 0: IPv4, 1: IPv6. */
716 rx_hash_field_select->l3_prot_type =
717 !!(hash_fields & MLX5_IPV6_IBV_RX_HASH);
718 /* 1 bit: 0: TCP, 1: UDP. */
719 rx_hash_field_select->l4_prot_type =
720 !!(hash_fields & MLX5_UDP_IBV_RX_HASH);
721 /* Bitmask which sets which fields to use in RX Hash. */
722 rx_hash_field_select->selected_fields =
723 ((!!(hash_fields & MLX5_L3_SRC_IBV_RX_HASH)) <<
724 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_SRC_IP) |
725 (!!(hash_fields & MLX5_L3_DST_IBV_RX_HASH)) <<
726 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_DST_IP |
727 (!!(hash_fields & MLX5_L4_SRC_IBV_RX_HASH)) <<
728 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_L4_SPORT |
729 (!!(hash_fields & MLX5_L4_DST_IBV_RX_HASH)) <<
730 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_L4_DPORT;
732 if (rxq_obj_type == MLX5_RXQ_TYPE_HAIRPIN)
733 tir_attr->transport_domain = priv->sh->td->id;
735 tir_attr->transport_domain = priv->sh->tdn;
736 memcpy(tir_attr->rx_hash_toeplitz_key, rss_key, MLX5_RSS_HASH_KEY_LEN);
737 tir_attr->indirect_table = ind_tbl->rqt->id;
738 if (dev->data->dev_conf.lpbk_mode)
739 tir_attr->self_lb_block =
740 MLX5_TIRC_SELF_LB_BLOCK_BLOCK_UNICAST;
742 tir_attr->lro_timeout_period_usecs = priv->config.lro.timeout;
743 tir_attr->lro_max_msg_sz = priv->max_lro_msg_size;
744 tir_attr->lro_enable_mask =
745 MLX5_TIRC_LRO_ENABLE_MASK_IPV4_LRO |
746 MLX5_TIRC_LRO_ENABLE_MASK_IPV6_LRO;
751 * Create an Rx Hash queue.
754 * Pointer to Ethernet device.
756 * Pointer to Rx Hash queue.
761 * 0 on success, a negative errno value otherwise and rte_errno is set.
764 mlx5_devx_hrxq_new(struct rte_eth_dev *dev, struct mlx5_hrxq *hrxq,
765 int tunnel __rte_unused)
767 struct mlx5_priv *priv = dev->data->dev_private;
768 struct mlx5_devx_tir_attr tir_attr = {0};
771 mlx5_devx_tir_attr_set(dev, hrxq->rss_key, hrxq->hash_fields,
772 hrxq->ind_table, tunnel, &tir_attr);
773 hrxq->tir = mlx5_devx_cmd_create_tir(priv->sh->cdev->ctx, &tir_attr);
775 DRV_LOG(ERR, "Port %u cannot create DevX TIR.",
780 #if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
781 if (mlx5_flow_os_create_flow_action_dest_devx_tir(hrxq->tir,
789 err = rte_errno; /* Save rte_errno before cleanup. */
791 claim_zero(mlx5_devx_cmd_destroy(hrxq->tir));
792 rte_errno = err; /* Restore rte_errno. */
797 * Destroy a DevX TIR object.
800 * Hash Rx queue to release its tir.
803 mlx5_devx_tir_destroy(struct mlx5_hrxq *hrxq)
805 claim_zero(mlx5_devx_cmd_destroy(hrxq->tir));
809 * Modify an Rx Hash queue configuration.
812 * Pointer to Ethernet device.
814 * Hash Rx queue to modify.
816 * RSS key for the Rx hash queue.
818 * Verbs protocol hash field to make the RSS on.
820 * Indirection table for TIR.
823 * 0 on success, a negative errno value otherwise and rte_errno is set.
826 mlx5_devx_hrxq_modify(struct rte_eth_dev *dev, struct mlx5_hrxq *hrxq,
827 const uint8_t *rss_key,
828 uint64_t hash_fields,
829 const struct mlx5_ind_table_obj *ind_tbl)
831 struct mlx5_devx_modify_tir_attr modify_tir = {0};
834 * untested for modification fields:
835 * - rx_hash_symmetric not set in hrxq_new(),
836 * - rx_hash_fn set hard-coded in hrxq_new(),
837 * - lro_xxx not set after rxq setup
839 if (ind_tbl != hrxq->ind_table)
840 modify_tir.modify_bitmask |=
841 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_INDIRECT_TABLE;
842 if (hash_fields != hrxq->hash_fields ||
843 memcmp(hrxq->rss_key, rss_key, MLX5_RSS_HASH_KEY_LEN))
844 modify_tir.modify_bitmask |=
845 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_HASH;
846 mlx5_devx_tir_attr_set(dev, rss_key, hash_fields, ind_tbl,
847 0, /* N/A - tunnel modification unsupported */
849 modify_tir.tirn = hrxq->tir->id;
850 if (mlx5_devx_cmd_modify_tir(hrxq->tir, &modify_tir)) {
851 DRV_LOG(ERR, "port %u cannot modify DevX TIR",
860 * Create a DevX drop action for Rx Hash queue.
863 * Pointer to Ethernet device.
866 * 0 on success, a negative errno value otherwise and rte_errno is set.
869 mlx5_devx_drop_action_create(struct rte_eth_dev *dev)
872 DRV_LOG(ERR, "DevX drop action is not supported yet.");
878 * Release a drop hash Rx queue.
881 * Pointer to Ethernet device.
884 mlx5_devx_drop_action_destroy(struct rte_eth_dev *dev)
887 DRV_LOG(ERR, "DevX drop action is not supported yet.");
892 * Create the Tx hairpin queue object.
895 * Pointer to Ethernet device.
897 * Queue index in DPDK Tx queue array.
900 * 0 on success, a negative errno value otherwise and rte_errno is set.
903 mlx5_txq_obj_hairpin_new(struct rte_eth_dev *dev, uint16_t idx)
905 struct mlx5_priv *priv = dev->data->dev_private;
906 struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
907 struct mlx5_txq_ctrl *txq_ctrl =
908 container_of(txq_data, struct mlx5_txq_ctrl, txq);
909 struct mlx5_devx_create_sq_attr attr = { 0 };
910 struct mlx5_txq_obj *tmpl = txq_ctrl->obj;
911 uint32_t max_wq_data;
913 MLX5_ASSERT(txq_data);
915 tmpl->txq_ctrl = txq_ctrl;
918 max_wq_data = priv->config.hca_attr.log_max_hairpin_wq_data_sz;
919 /* Jumbo frames > 9KB should be supported, and more packets. */
920 if (priv->config.log_hp_size != (uint32_t)MLX5_ARG_UNSET) {
921 if (priv->config.log_hp_size > max_wq_data) {
922 DRV_LOG(ERR, "Total data size %u power of 2 is "
923 "too large for hairpin.",
924 priv->config.log_hp_size);
928 attr.wq_attr.log_hairpin_data_sz = priv->config.log_hp_size;
930 attr.wq_attr.log_hairpin_data_sz =
931 (max_wq_data < MLX5_HAIRPIN_JUMBO_LOG_SIZE) ?
932 max_wq_data : MLX5_HAIRPIN_JUMBO_LOG_SIZE;
934 /* Set the packets number to the maximum value for performance. */
935 attr.wq_attr.log_hairpin_num_packets =
936 attr.wq_attr.log_hairpin_data_sz -
937 MLX5_HAIRPIN_QUEUE_STRIDE;
938 attr.tis_num = priv->sh->tis->id;
939 tmpl->sq = mlx5_devx_cmd_create_sq(priv->sh->cdev->ctx, &attr);
942 "Port %u tx hairpin queue %u can't create SQ object.",
943 dev->data->port_id, idx);
950 #if defined(HAVE_MLX5DV_DEVX_UAR_OFFSET) || !defined(HAVE_INFINIBAND_VERBS_H)
952 * Destroy the Tx queue DevX object.
955 * Txq object to destroy.
958 mlx5_txq_release_devx_resources(struct mlx5_txq_obj *txq_obj)
960 mlx5_devx_sq_destroy(&txq_obj->sq_obj);
961 memset(&txq_obj->sq_obj, 0, sizeof(txq_obj->sq_obj));
962 mlx5_devx_cq_destroy(&txq_obj->cq_obj);
963 memset(&txq_obj->cq_obj, 0, sizeof(txq_obj->cq_obj));
967 * Create a SQ object and its resources using DevX.
970 * Pointer to Ethernet device.
972 * Queue index in DPDK Tx queue array.
973 * @param[in] log_desc_n
974 * Log of number of descriptors in queue.
977 * 0 on success, a negative errno value otherwise and rte_errno is set.
980 mlx5_txq_create_devx_sq_resources(struct rte_eth_dev *dev, uint16_t idx,
983 struct mlx5_priv *priv = dev->data->dev_private;
984 struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
985 struct mlx5_txq_ctrl *txq_ctrl =
986 container_of(txq_data, struct mlx5_txq_ctrl, txq);
987 struct mlx5_txq_obj *txq_obj = txq_ctrl->obj;
988 struct mlx5_devx_create_sq_attr sq_attr = {
989 .flush_in_error_en = 1,
990 .allow_multi_pkt_send_wqe = !!priv->config.mps,
991 .min_wqe_inline_mode = priv->config.hca_attr.vport_inline_mode,
992 .allow_swp = !!priv->config.swp,
993 .cqn = txq_obj->cq_obj.cq->id,
995 .tis_num = priv->sh->tis->id,
996 .wq_attr = (struct mlx5_devx_wq_attr){
997 .pd = priv->sh->cdev->pdn,
999 mlx5_os_get_devx_uar_page_id(priv->sh->tx_uar),
1001 .ts_format = mlx5_ts_format_conv(priv->sh->sq_ts_format),
1003 /* Create Send Queue object with DevX. */
1004 return mlx5_devx_sq_create(priv->sh->cdev->ctx, &txq_obj->sq_obj,
1005 log_desc_n, &sq_attr, priv->sh->numa_node);
1010 * Create the Tx queue DevX object.
1013 * Pointer to Ethernet device.
1015 * Queue index in DPDK Tx queue array.
1018 * 0 on success, a negative errno value otherwise and rte_errno is set.
1021 mlx5_txq_devx_obj_new(struct rte_eth_dev *dev, uint16_t idx)
1023 struct mlx5_priv *priv = dev->data->dev_private;
1024 struct mlx5_txq_data *txq_data = (*priv->txqs)[idx];
1025 struct mlx5_txq_ctrl *txq_ctrl =
1026 container_of(txq_data, struct mlx5_txq_ctrl, txq);
1028 if (txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN)
1029 return mlx5_txq_obj_hairpin_new(dev, idx);
1030 #if !defined(HAVE_MLX5DV_DEVX_UAR_OFFSET) && defined(HAVE_INFINIBAND_VERBS_H)
1031 DRV_LOG(ERR, "Port %u Tx queue %u cannot create with DevX, no UAR.",
1032 dev->data->port_id, idx);
1036 struct mlx5_dev_ctx_shared *sh = priv->sh;
1037 struct mlx5_txq_obj *txq_obj = txq_ctrl->obj;
1038 struct mlx5_devx_cq_attr cq_attr = {
1039 .uar_page_id = mlx5_os_get_devx_uar_page_id(sh->tx_uar),
1042 uint32_t cqe_n, log_desc_n;
1043 uint32_t wqe_n, wqe_size;
1046 MLX5_ASSERT(txq_data);
1047 MLX5_ASSERT(txq_obj);
1048 txq_obj->txq_ctrl = txq_ctrl;
1050 cqe_n = (1UL << txq_data->elts_n) / MLX5_TX_COMP_THRESH +
1051 1 + MLX5_TX_COMP_THRESH_INLINE_DIV;
1052 log_desc_n = log2above(cqe_n);
1053 cqe_n = 1UL << log_desc_n;
1054 if (cqe_n > UINT16_MAX) {
1055 DRV_LOG(ERR, "Port %u Tx queue %u requests to many CQEs %u.",
1056 dev->data->port_id, txq_data->idx, cqe_n);
1060 /* Create completion queue object with DevX. */
1061 ret = mlx5_devx_cq_create(sh->cdev->ctx, &txq_obj->cq_obj, log_desc_n,
1062 &cq_attr, priv->sh->numa_node);
1064 DRV_LOG(ERR, "Port %u Tx queue %u CQ creation failure.",
1065 dev->data->port_id, idx);
1068 txq_data->cqe_n = log_desc_n;
1069 txq_data->cqe_s = cqe_n;
1070 txq_data->cqe_m = txq_data->cqe_s - 1;
1071 txq_data->cqes = txq_obj->cq_obj.cqes;
1072 txq_data->cq_ci = 0;
1073 txq_data->cq_pi = 0;
1074 txq_data->cq_db = txq_obj->cq_obj.db_rec;
1075 *txq_data->cq_db = 0;
1077 * Adjust the amount of WQEs depending on inline settings.
1078 * The number of descriptors should be enough to handle
1079 * the specified number of packets. If queue is being created
1080 * with Verbs the rdma-core does queue size adjustment
1081 * internally in the mlx5_calc_sq_size(), we do the same
1082 * for the queue being created with DevX at this point.
1084 wqe_size = txq_data->tso_en ?
1085 RTE_ALIGN(txq_ctrl->max_tso_header, MLX5_WSEG_SIZE) : 0;
1086 wqe_size += sizeof(struct mlx5_wqe_cseg) +
1087 sizeof(struct mlx5_wqe_eseg) +
1088 sizeof(struct mlx5_wqe_dseg);
1089 if (txq_data->inlen_send)
1090 wqe_size = RTE_MAX(wqe_size, sizeof(struct mlx5_wqe_cseg) +
1091 sizeof(struct mlx5_wqe_eseg) +
1092 RTE_ALIGN(txq_data->inlen_send +
1095 wqe_size = RTE_ALIGN(wqe_size, MLX5_WQE_SIZE) / MLX5_WQE_SIZE;
1096 /* Create Send Queue object with DevX. */
1097 wqe_n = RTE_MIN((1UL << txq_data->elts_n) * wqe_size,
1098 (uint32_t)priv->sh->device_attr.max_qp_wr);
1099 log_desc_n = log2above(wqe_n);
1100 ret = mlx5_txq_create_devx_sq_resources(dev, idx, log_desc_n);
1102 DRV_LOG(ERR, "Port %u Tx queue %u SQ creation failure.",
1103 dev->data->port_id, idx);
1107 /* Create the Work Queue. */
1108 txq_data->wqe_n = log_desc_n;
1109 txq_data->wqe_s = 1 << txq_data->wqe_n;
1110 txq_data->wqe_m = txq_data->wqe_s - 1;
1111 txq_data->wqes = (struct mlx5_wqe *)(uintptr_t)txq_obj->sq_obj.wqes;
1112 txq_data->wqes_end = txq_data->wqes + txq_data->wqe_s;
1113 txq_data->wqe_ci = 0;
1114 txq_data->wqe_pi = 0;
1115 txq_data->wqe_comp = 0;
1116 txq_data->wqe_thres = txq_data->wqe_s / MLX5_TX_COMP_THRESH_INLINE_DIV;
1117 txq_data->qp_db = &txq_obj->sq_obj.db_rec[MLX5_SND_DBR];
1118 *txq_data->qp_db = 0;
1119 txq_data->qp_num_8s = txq_obj->sq_obj.sq->id << 8;
1120 /* Change Send Queue state to Ready-to-Send. */
1121 ret = mlx5_devx_modify_sq(txq_obj, MLX5_TXQ_MOD_RST2RDY, 0);
1125 "Port %u Tx queue %u SQ state to SQC_STATE_RDY failed.",
1126 dev->data->port_id, idx);
1129 #ifdef HAVE_IBV_FLOW_DV_SUPPORT
1131 * If using DevX need to query and store TIS transport domain value.
1132 * This is done once per port.
1133 * Will use this value on Rx, when creating matching TIR.
1136 priv->sh->tdn = priv->sh->td->id;
1138 MLX5_ASSERT(sh->tx_uar);
1139 reg_addr = mlx5_os_get_devx_uar_reg_addr(sh->tx_uar);
1140 MLX5_ASSERT(reg_addr);
1141 txq_ctrl->bf_reg = reg_addr;
1142 txq_ctrl->uar_mmap_offset =
1143 mlx5_os_get_devx_uar_mmap_offset(sh->tx_uar);
1144 txq_uar_init(txq_ctrl);
1145 dev->data->tx_queue_state[idx] = RTE_ETH_QUEUE_STATE_STARTED;
1148 ret = rte_errno; /* Save rte_errno before cleanup. */
1149 mlx5_txq_release_devx_resources(txq_obj);
1150 rte_errno = ret; /* Restore rte_errno. */
1156 * Release an Tx DevX queue object.
1159 * DevX Tx queue object.
1162 mlx5_txq_devx_obj_release(struct mlx5_txq_obj *txq_obj)
1164 MLX5_ASSERT(txq_obj);
1165 if (txq_obj->txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN) {
1167 claim_zero(mlx5_devx_cmd_destroy(txq_obj->tis));
1168 #if defined(HAVE_MLX5DV_DEVX_UAR_OFFSET) || !defined(HAVE_INFINIBAND_VERBS_H)
1170 mlx5_txq_release_devx_resources(txq_obj);
1175 struct mlx5_obj_ops devx_obj_ops = {
1176 .rxq_obj_modify_vlan_strip = mlx5_rxq_obj_modify_rq_vlan_strip,
1177 .rxq_obj_new = mlx5_rxq_devx_obj_new,
1178 .rxq_event_get = mlx5_rx_devx_get_event,
1179 .rxq_obj_modify = mlx5_devx_modify_rq,
1180 .rxq_obj_release = mlx5_rxq_devx_obj_release,
1181 .ind_table_new = mlx5_devx_ind_table_new,
1182 .ind_table_modify = mlx5_devx_ind_table_modify,
1183 .ind_table_destroy = mlx5_devx_ind_table_destroy,
1184 .hrxq_new = mlx5_devx_hrxq_new,
1185 .hrxq_destroy = mlx5_devx_tir_destroy,
1186 .hrxq_modify = mlx5_devx_hrxq_modify,
1187 .drop_action_create = mlx5_devx_drop_action_create,
1188 .drop_action_destroy = mlx5_devx_drop_action_destroy,
1189 .txq_obj_new = mlx5_txq_devx_obj_new,
1190 .txq_obj_modify = mlx5_devx_modify_sq,
1191 .txq_obj_release = mlx5_txq_devx_obj_release,
1192 .lb_dummy_queue_create = NULL,
1193 .lb_dummy_queue_release = NULL,