1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2015 6WIND S.A.
3 * Copyright 2015-2019 Mellanox Technologies, Ltd
11 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
13 #pragma GCC diagnostic ignored "-Wpedantic"
15 #include <infiniband/verbs.h>
16 #include <infiniband/mlx5dv.h>
18 #pragma GCC diagnostic error "-Wpedantic"
22 #include <rte_mempool.h>
23 #include <rte_prefetch.h>
24 #include <rte_common.h>
25 #include <rte_branch_prediction.h>
26 #include <rte_ether.h>
27 #include <rte_cycles.h>
30 #include <mlx5_devx_cmds.h>
32 #include <mlx5_common.h>
34 #include "mlx5_defs.h"
36 #include "mlx5_utils.h"
37 #include "mlx5_rxtx.h"
38 #include "mlx5_autoconf.h"
40 /* TX burst subroutines return codes. */
41 enum mlx5_txcmp_code {
42 MLX5_TXCMP_CODE_EXIT = 0,
43 MLX5_TXCMP_CODE_ERROR,
44 MLX5_TXCMP_CODE_SINGLE,
45 MLX5_TXCMP_CODE_MULTI,
51 * These defines are used to configure Tx burst routine option set
52 * supported at compile time. The not specified options are optimized out
53 * out due to if conditions can be explicitly calculated at compile time.
54 * The offloads with bigger runtime check (require more CPU cycles to
55 * skip) overhead should have the bigger index - this is needed to
56 * select the better matching routine function if no exact match and
57 * some offloads are not actually requested.
59 #define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment packets.*/
60 #define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload supported.*/
61 #define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser offloads.*/
62 #define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded. */
63 #define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported. */
64 #define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
65 #define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
66 #define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
67 #define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
69 /* The most common offloads groups. */
70 #define MLX5_TXOFF_CONFIG_NONE 0
71 #define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
72 MLX5_TXOFF_CONFIG_TSO | \
73 MLX5_TXOFF_CONFIG_SWP | \
74 MLX5_TXOFF_CONFIG_CSUM | \
75 MLX5_TXOFF_CONFIG_INLINE | \
76 MLX5_TXOFF_CONFIG_VLAN | \
77 MLX5_TXOFF_CONFIG_METADATA)
79 #define MLX5_TXOFF_CONFIG(mask) (olx & MLX5_TXOFF_CONFIG_##mask)
81 #define MLX5_TXOFF_DECL(func, olx) \
82 static uint16_t mlx5_tx_burst_##func(void *txq, \
83 struct rte_mbuf **pkts, \
86 return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
87 pkts, pkts_n, (olx)); \
90 #define MLX5_TXOFF_INFO(func, olx) {mlx5_tx_burst_##func, olx},
92 static __rte_always_inline uint32_t
93 rxq_cq_to_pkt_type(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe);
95 static __rte_always_inline int
96 mlx5_rx_poll_len(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe,
97 uint16_t cqe_cnt, volatile struct mlx5_mini_cqe8 **mcqe);
99 static __rte_always_inline uint32_t
100 rxq_cq_to_ol_flags(volatile struct mlx5_cqe *cqe);
102 static __rte_always_inline void
103 rxq_cq_to_mbuf(struct mlx5_rxq_data *rxq, struct rte_mbuf *pkt,
104 volatile struct mlx5_cqe *cqe, uint32_t rss_hash_res);
106 static __rte_always_inline void
107 mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx,
108 const unsigned int strd_n);
111 mlx5_queue_state_modify(struct rte_eth_dev *dev,
112 struct mlx5_mp_arg_queue_state_modify *sm);
115 mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
116 volatile struct mlx5_cqe *restrict cqe,
120 mlx5_lro_update_hdr(uint8_t *restrict padd,
121 volatile struct mlx5_cqe *restrict cqe,
124 uint32_t mlx5_ptype_table[] __rte_cache_aligned = {
125 [0xff] = RTE_PTYPE_ALL_MASK, /* Last entry for errored packet. */
128 uint8_t mlx5_cksum_table[1 << 10] __rte_cache_aligned;
129 uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
131 uint64_t rte_net_mlx5_dynf_inline_mask;
132 #define PKT_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
135 * Build a table to translate Rx completion flags to packet type.
137 * @note: fix mlx5_dev_supported_ptypes_get() if any change here.
140 mlx5_set_ptype_table(void)
143 uint32_t (*p)[RTE_DIM(mlx5_ptype_table)] = &mlx5_ptype_table;
145 /* Last entry must not be overwritten, reserved for errored packet. */
146 for (i = 0; i < RTE_DIM(mlx5_ptype_table) - 1; ++i)
147 (*p)[i] = RTE_PTYPE_UNKNOWN;
149 * The index to the array should have:
150 * bit[1:0] = l3_hdr_type
151 * bit[4:2] = l4_hdr_type
154 * bit[7] = outer_l3_type
157 (*p)[0x00] = RTE_PTYPE_L2_ETHER;
159 (*p)[0x01] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
160 RTE_PTYPE_L4_NONFRAG;
161 (*p)[0x02] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
162 RTE_PTYPE_L4_NONFRAG;
164 (*p)[0x21] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
166 (*p)[0x22] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
169 (*p)[0x05] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
171 (*p)[0x06] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
173 (*p)[0x0d] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
175 (*p)[0x0e] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
177 (*p)[0x11] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
179 (*p)[0x12] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
182 (*p)[0x09] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
184 (*p)[0x0a] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
186 /* Repeat with outer_l3_type being set. Just in case. */
187 (*p)[0x81] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
188 RTE_PTYPE_L4_NONFRAG;
189 (*p)[0x82] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
190 RTE_PTYPE_L4_NONFRAG;
191 (*p)[0xa1] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
193 (*p)[0xa2] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
195 (*p)[0x85] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
197 (*p)[0x86] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
199 (*p)[0x8d] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
201 (*p)[0x8e] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
203 (*p)[0x91] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
205 (*p)[0x92] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
207 (*p)[0x89] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
209 (*p)[0x8a] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
212 (*p)[0x40] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
213 (*p)[0x41] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
214 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
215 RTE_PTYPE_INNER_L4_NONFRAG;
216 (*p)[0x42] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
217 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
218 RTE_PTYPE_INNER_L4_NONFRAG;
219 (*p)[0xc0] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
220 (*p)[0xc1] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
221 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
222 RTE_PTYPE_INNER_L4_NONFRAG;
223 (*p)[0xc2] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
224 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
225 RTE_PTYPE_INNER_L4_NONFRAG;
226 /* Tunneled - Fragmented */
227 (*p)[0x61] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
228 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
229 RTE_PTYPE_INNER_L4_FRAG;
230 (*p)[0x62] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
231 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
232 RTE_PTYPE_INNER_L4_FRAG;
233 (*p)[0xe1] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
234 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
235 RTE_PTYPE_INNER_L4_FRAG;
236 (*p)[0xe2] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
237 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
238 RTE_PTYPE_INNER_L4_FRAG;
240 (*p)[0x45] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
241 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
242 RTE_PTYPE_INNER_L4_TCP;
243 (*p)[0x46] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
244 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
245 RTE_PTYPE_INNER_L4_TCP;
246 (*p)[0x4d] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
247 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
248 RTE_PTYPE_INNER_L4_TCP;
249 (*p)[0x4e] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
250 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
251 RTE_PTYPE_INNER_L4_TCP;
252 (*p)[0x51] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
253 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
254 RTE_PTYPE_INNER_L4_TCP;
255 (*p)[0x52] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
256 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
257 RTE_PTYPE_INNER_L4_TCP;
258 (*p)[0xc5] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
259 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
260 RTE_PTYPE_INNER_L4_TCP;
261 (*p)[0xc6] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
262 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
263 RTE_PTYPE_INNER_L4_TCP;
264 (*p)[0xcd] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
265 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
266 RTE_PTYPE_INNER_L4_TCP;
267 (*p)[0xce] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
268 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
269 RTE_PTYPE_INNER_L4_TCP;
270 (*p)[0xd1] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
271 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
272 RTE_PTYPE_INNER_L4_TCP;
273 (*p)[0xd2] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
274 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
275 RTE_PTYPE_INNER_L4_TCP;
277 (*p)[0x49] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
278 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
279 RTE_PTYPE_INNER_L4_UDP;
280 (*p)[0x4a] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
281 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
282 RTE_PTYPE_INNER_L4_UDP;
283 (*p)[0xc9] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
284 RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
285 RTE_PTYPE_INNER_L4_UDP;
286 (*p)[0xca] = RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
287 RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN |
288 RTE_PTYPE_INNER_L4_UDP;
292 * Build a table to translate packet to checksum type of Verbs.
295 mlx5_set_cksum_table(void)
301 * The index should have:
302 * bit[0] = PKT_TX_TCP_SEG
303 * bit[2:3] = PKT_TX_UDP_CKSUM, PKT_TX_TCP_CKSUM
304 * bit[4] = PKT_TX_IP_CKSUM
305 * bit[8] = PKT_TX_OUTER_IP_CKSUM
308 for (i = 0; i < RTE_DIM(mlx5_cksum_table); ++i) {
311 /* Tunneled packet. */
312 if (i & (1 << 8)) /* Outer IP. */
313 v |= MLX5_ETH_WQE_L3_CSUM;
314 if (i & (1 << 4)) /* Inner IP. */
315 v |= MLX5_ETH_WQE_L3_INNER_CSUM;
316 if (i & (3 << 2 | 1 << 0)) /* L4 or TSO. */
317 v |= MLX5_ETH_WQE_L4_INNER_CSUM;
320 if (i & (1 << 4)) /* IP. */
321 v |= MLX5_ETH_WQE_L3_CSUM;
322 if (i & (3 << 2 | 1 << 0)) /* L4 or TSO. */
323 v |= MLX5_ETH_WQE_L4_CSUM;
325 mlx5_cksum_table[i] = v;
330 * Build a table to translate packet type of mbuf to SWP type of Verbs.
333 mlx5_set_swp_types_table(void)
339 * The index should have:
340 * bit[0:1] = PKT_TX_L4_MASK
341 * bit[4] = PKT_TX_IPV6
342 * bit[8] = PKT_TX_OUTER_IPV6
343 * bit[9] = PKT_TX_OUTER_UDP
345 for (i = 0; i < RTE_DIM(mlx5_swp_types_table); ++i) {
348 v |= MLX5_ETH_WQE_L3_OUTER_IPV6;
350 v |= MLX5_ETH_WQE_L4_OUTER_UDP;
352 v |= MLX5_ETH_WQE_L3_INNER_IPV6;
353 if ((i & 3) == (PKT_TX_UDP_CKSUM >> 52))
354 v |= MLX5_ETH_WQE_L4_INNER_UDP;
355 mlx5_swp_types_table[i] = v;
360 * Set Software Parser flags and offsets in Ethernet Segment of WQE.
361 * Flags must be preliminary initialized to zero.
364 * Pointer to burst routine local context.
366 * Pointer to store Software Parser flags
368 * Configured Tx offloads mask. It is fully defined at
369 * compile time and may be used for optimization.
372 * Software Parser offsets packed in dword.
373 * Software Parser flags are set by pointer.
375 static __rte_always_inline uint32_t
376 txq_mbuf_to_swp(struct mlx5_txq_local *restrict loc,
381 unsigned int idx, off;
384 if (!MLX5_TXOFF_CONFIG(SWP))
386 ol = loc->mbuf->ol_flags;
387 tunnel = ol & PKT_TX_TUNNEL_MASK;
389 * Check whether Software Parser is required.
390 * Only customized tunnels may ask for.
392 if (likely(tunnel != PKT_TX_TUNNEL_UDP && tunnel != PKT_TX_TUNNEL_IP))
395 * The index should have:
396 * bit[0:1] = PKT_TX_L4_MASK
397 * bit[4] = PKT_TX_IPV6
398 * bit[8] = PKT_TX_OUTER_IPV6
399 * bit[9] = PKT_TX_OUTER_UDP
401 idx = (ol & (PKT_TX_L4_MASK | PKT_TX_IPV6 | PKT_TX_OUTER_IPV6)) >> 52;
402 idx |= (tunnel == PKT_TX_TUNNEL_UDP) ? (1 << 9) : 0;
403 *swp_flags = mlx5_swp_types_table[idx];
405 * Set offsets for SW parser. Since ConnectX-5, SW parser just
406 * complements HW parser. SW parser starts to engage only if HW parser
407 * can't reach a header. For the older devices, HW parser will not kick
408 * in if any of SWP offsets is set. Therefore, all of the L3 offsets
409 * should be set regardless of HW offload.
411 off = loc->mbuf->outer_l2_len;
412 if (MLX5_TXOFF_CONFIG(VLAN) && ol & PKT_TX_VLAN_PKT)
413 off += sizeof(struct rte_vlan_hdr);
414 set = (off >> 1) << 8; /* Outer L3 offset. */
415 off += loc->mbuf->outer_l3_len;
416 if (tunnel == PKT_TX_TUNNEL_UDP)
417 set |= off >> 1; /* Outer L4 offset. */
418 if (ol & (PKT_TX_IPV4 | PKT_TX_IPV6)) { /* Inner IP. */
419 const uint64_t csum = ol & PKT_TX_L4_MASK;
420 off += loc->mbuf->l2_len;
421 set |= (off >> 1) << 24; /* Inner L3 offset. */
422 if (csum == PKT_TX_TCP_CKSUM ||
423 csum == PKT_TX_UDP_CKSUM ||
424 (MLX5_TXOFF_CONFIG(TSO) && ol & PKT_TX_TCP_SEG)) {
425 off += loc->mbuf->l3_len;
426 set |= (off >> 1) << 16; /* Inner L4 offset. */
429 set = rte_cpu_to_le_32(set);
434 * Convert the Checksum offloads to Verbs.
437 * Pointer to the mbuf.
440 * Converted checksum flags.
442 static __rte_always_inline uint8_t
443 txq_ol_cksum_to_cs(struct rte_mbuf *buf)
446 uint8_t is_tunnel = !!(buf->ol_flags & PKT_TX_TUNNEL_MASK);
447 const uint64_t ol_flags_mask = PKT_TX_TCP_SEG | PKT_TX_L4_MASK |
448 PKT_TX_IP_CKSUM | PKT_TX_OUTER_IP_CKSUM;
451 * The index should have:
452 * bit[0] = PKT_TX_TCP_SEG
453 * bit[2:3] = PKT_TX_UDP_CKSUM, PKT_TX_TCP_CKSUM
454 * bit[4] = PKT_TX_IP_CKSUM
455 * bit[8] = PKT_TX_OUTER_IP_CKSUM
458 idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
459 return mlx5_cksum_table[idx];
463 * Internal function to compute the number of used descriptors in an RX queue
469 * The number of used rx descriptor.
472 rx_queue_count(struct mlx5_rxq_data *rxq)
474 struct rxq_zip *zip = &rxq->zip;
475 volatile struct mlx5_cqe *cqe;
476 const unsigned int cqe_n = (1 << rxq->cqe_n);
477 const unsigned int cqe_cnt = cqe_n - 1;
481 /* if we are processing a compressed cqe */
483 used = zip->cqe_cnt - zip->ca;
489 cqe = &(*rxq->cqes)[cq_ci & cqe_cnt];
490 while (check_cqe(cqe, cqe_n, cq_ci) != MLX5_CQE_STATUS_HW_OWN) {
494 op_own = cqe->op_own;
495 if (MLX5_CQE_FORMAT(op_own) == MLX5_COMPRESSED)
496 n = rte_be_to_cpu_32(cqe->byte_cnt);
501 cqe = &(*rxq->cqes)[cq_ci & cqe_cnt];
503 used = RTE_MIN(used, (1U << rxq->elts_n) - 1);
508 * DPDK callback to check the status of a rx descriptor.
513 * The index of the descriptor in the ring.
516 * The status of the tx descriptor.
519 mlx5_rx_descriptor_status(void *rx_queue, uint16_t offset)
521 struct mlx5_rxq_data *rxq = rx_queue;
522 struct mlx5_rxq_ctrl *rxq_ctrl =
523 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
524 struct rte_eth_dev *dev = ETH_DEV(rxq_ctrl->priv);
526 if (dev->rx_pkt_burst != mlx5_rx_burst) {
530 if (offset >= (1 << rxq->elts_n)) {
534 if (offset < rx_queue_count(rxq))
535 return RTE_ETH_RX_DESC_DONE;
536 return RTE_ETH_RX_DESC_AVAIL;
540 * DPDK callback to get the RX queue information
543 * Pointer to the device structure.
546 * Rx queue identificator.
549 * Pointer to the RX queue information structure.
556 mlx5_rxq_info_get(struct rte_eth_dev *dev, uint16_t rx_queue_id,
557 struct rte_eth_rxq_info *qinfo)
559 struct mlx5_priv *priv = dev->data->dev_private;
560 struct mlx5_rxq_data *rxq = (*priv->rxqs)[rx_queue_id];
561 struct mlx5_rxq_ctrl *rxq_ctrl =
562 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
566 qinfo->mp = mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ?
567 rxq->mprq_mp : rxq->mp;
568 qinfo->conf.rx_thresh.pthresh = 0;
569 qinfo->conf.rx_thresh.hthresh = 0;
570 qinfo->conf.rx_thresh.wthresh = 0;
571 qinfo->conf.rx_free_thresh = rxq->rq_repl_thresh;
572 qinfo->conf.rx_drop_en = 1;
573 qinfo->conf.rx_deferred_start = rxq_ctrl ? 0 : 1;
574 qinfo->conf.offloads = dev->data->dev_conf.rxmode.offloads;
575 qinfo->scattered_rx = dev->data->scattered_rx;
576 qinfo->nb_desc = 1 << rxq->elts_n;
580 * DPDK callback to get the RX packet burst mode information
583 * Pointer to the device structure.
586 * Rx queue identificatior.
589 * Pointer to the burts mode information.
592 * 0 as success, -EINVAL as failure.
596 mlx5_rx_burst_mode_get(struct rte_eth_dev *dev,
597 uint16_t rx_queue_id __rte_unused,
598 struct rte_eth_burst_mode *mode)
600 eth_rx_burst_t pkt_burst = dev->rx_pkt_burst;
602 if (pkt_burst == mlx5_rx_burst) {
603 snprintf(mode->info, sizeof(mode->info), "%s", "Scalar");
604 } else if (pkt_burst == mlx5_rx_burst_mprq) {
605 snprintf(mode->info, sizeof(mode->info), "%s", "Multi-Packet RQ");
606 } else if (pkt_burst == mlx5_rx_burst_vec) {
607 #if defined RTE_ARCH_X86_64
608 snprintf(mode->info, sizeof(mode->info), "%s", "Vector SSE");
609 #elif defined RTE_ARCH_ARM64
610 snprintf(mode->info, sizeof(mode->info), "%s", "Vector Neon");
611 #elif defined RTE_ARCH_PPC_64
612 snprintf(mode->info, sizeof(mode->info), "%s", "Vector AltiVec");
623 * DPDK callback to get the number of used descriptors in a RX queue
626 * Pointer to the device structure.
632 * The number of used rx descriptor.
633 * -EINVAL if the queue is invalid
636 mlx5_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
638 struct mlx5_priv *priv = dev->data->dev_private;
639 struct mlx5_rxq_data *rxq;
641 if (dev->rx_pkt_burst != mlx5_rx_burst) {
645 rxq = (*priv->rxqs)[rx_queue_id];
650 return rx_queue_count(rxq);
653 #define MLX5_SYSTEM_LOG_DIR "/var/log"
655 * Dump debug information to log file.
660 * If not NULL this string is printed as a header to the output
661 * and the output will be in hexadecimal view.
663 * This is the buffer address to print out.
665 * The number of bytes to dump out.
668 mlx5_dump_debug_information(const char *fname, const char *hex_title,
669 const void *buf, unsigned int hex_len)
673 MKSTR(path, "%s/%s", MLX5_SYSTEM_LOG_DIR, fname);
674 fd = fopen(path, "a+");
676 DRV_LOG(WARNING, "cannot open %s for debug dump", path);
677 MKSTR(path2, "./%s", fname);
678 fd = fopen(path2, "a+");
680 DRV_LOG(ERR, "cannot open %s for debug dump", path2);
683 DRV_LOG(INFO, "New debug dump in file %s", path2);
685 DRV_LOG(INFO, "New debug dump in file %s", path);
688 rte_hexdump(fd, hex_title, buf, hex_len);
690 fprintf(fd, "%s", (const char *)buf);
691 fprintf(fd, "\n\n\n");
696 * Move QP from error state to running state and initialize indexes.
699 * Pointer to TX queue control structure.
702 * 0 on success, else -1.
705 tx_recover_qp(struct mlx5_txq_ctrl *txq_ctrl)
707 struct mlx5_mp_arg_queue_state_modify sm = {
709 .queue_id = txq_ctrl->txq.idx,
712 if (mlx5_queue_state_modify(ETH_DEV(txq_ctrl->priv), &sm))
714 txq_ctrl->txq.wqe_ci = 0;
715 txq_ctrl->txq.wqe_pi = 0;
716 txq_ctrl->txq.elts_comp = 0;
720 /* Return 1 if the error CQE is signed otherwise, sign it and return 0. */
722 check_err_cqe_seen(volatile struct mlx5_err_cqe *err_cqe)
724 static const uint8_t magic[] = "seen";
728 for (i = 0; i < sizeof(magic); ++i)
729 if (!ret || err_cqe->rsvd1[i] != magic[i]) {
731 err_cqe->rsvd1[i] = magic[i];
740 * Pointer to TX queue structure.
742 * Pointer to the error CQE.
745 * Negative value if queue recovery failed, otherwise
746 * the error completion entry is handled successfully.
749 mlx5_tx_error_cqe_handle(struct mlx5_txq_data *restrict txq,
750 volatile struct mlx5_err_cqe *err_cqe)
752 if (err_cqe->syndrome != MLX5_CQE_SYNDROME_WR_FLUSH_ERR) {
753 const uint16_t wqe_m = ((1 << txq->wqe_n) - 1);
754 struct mlx5_txq_ctrl *txq_ctrl =
755 container_of(txq, struct mlx5_txq_ctrl, txq);
756 uint16_t new_wqe_pi = rte_be_to_cpu_16(err_cqe->wqe_counter);
757 int seen = check_err_cqe_seen(err_cqe);
759 if (!seen && txq_ctrl->dump_file_n <
760 txq_ctrl->priv->config.max_dump_files_num) {
761 MKSTR(err_str, "Unexpected CQE error syndrome "
762 "0x%02x CQN = %u SQN = %u wqe_counter = %u "
763 "wq_ci = %u cq_ci = %u", err_cqe->syndrome,
764 txq->cqe_s, txq->qp_num_8s >> 8,
765 rte_be_to_cpu_16(err_cqe->wqe_counter),
766 txq->wqe_ci, txq->cq_ci);
767 MKSTR(name, "dpdk_mlx5_port_%u_txq_%u_index_%u_%u",
768 PORT_ID(txq_ctrl->priv), txq->idx,
769 txq_ctrl->dump_file_n, (uint32_t)rte_rdtsc());
770 mlx5_dump_debug_information(name, NULL, err_str, 0);
771 mlx5_dump_debug_information(name, "MLX5 Error CQ:",
772 (const void *)((uintptr_t)
776 mlx5_dump_debug_information(name, "MLX5 Error SQ:",
777 (const void *)((uintptr_t)
781 txq_ctrl->dump_file_n++;
785 * Count errors in WQEs units.
786 * Later it can be improved to count error packets,
787 * for example, by SQ parsing to find how much packets
788 * should be counted for each WQE.
790 txq->stats.oerrors += ((txq->wqe_ci & wqe_m) -
792 if (tx_recover_qp(txq_ctrl)) {
793 /* Recovering failed - retry later on the same WQE. */
796 /* Release all the remaining buffers. */
797 txq_free_elts(txq_ctrl);
803 * Translate RX completion flags to packet type.
806 * Pointer to RX queue structure.
810 * @note: fix mlx5_dev_supported_ptypes_get() if any change here.
813 * Packet type for struct rte_mbuf.
815 static inline uint32_t
816 rxq_cq_to_pkt_type(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe)
819 uint8_t pinfo = cqe->pkt_info;
820 uint16_t ptype = cqe->hdr_type_etc;
823 * The index to the array should have:
824 * bit[1:0] = l3_hdr_type
825 * bit[4:2] = l4_hdr_type
828 * bit[7] = outer_l3_type
830 idx = ((pinfo & 0x3) << 6) | ((ptype & 0xfc00) >> 10);
831 return mlx5_ptype_table[idx] | rxq->tunnel * !!(idx & (1 << 6));
835 * Initialize Rx WQ and indexes.
838 * Pointer to RX queue structure.
841 mlx5_rxq_initialize(struct mlx5_rxq_data *rxq)
843 const unsigned int wqe_n = 1 << rxq->elts_n;
846 for (i = 0; (i != wqe_n); ++i) {
847 volatile struct mlx5_wqe_data_seg *scat;
851 if (mlx5_rxq_mprq_enabled(rxq)) {
852 struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[i];
854 scat = &((volatile struct mlx5_wqe_mprq *)
856 addr = (uintptr_t)mlx5_mprq_buf_addr(buf,
857 1 << rxq->strd_num_n);
858 byte_count = (1 << rxq->strd_sz_n) *
859 (1 << rxq->strd_num_n);
861 struct rte_mbuf *buf = (*rxq->elts)[i];
863 scat = &((volatile struct mlx5_wqe_data_seg *)
865 addr = rte_pktmbuf_mtod(buf, uintptr_t);
866 byte_count = DATA_LEN(buf);
868 /* scat->addr must be able to store a pointer. */
869 MLX5_ASSERT(sizeof(scat->addr) >= sizeof(uintptr_t));
870 *scat = (struct mlx5_wqe_data_seg){
871 .addr = rte_cpu_to_be_64(addr),
872 .byte_count = rte_cpu_to_be_32(byte_count),
873 .lkey = mlx5_rx_addr2mr(rxq, addr),
876 rxq->consumed_strd = 0;
877 rxq->decompressed = 0;
879 rxq->zip = (struct rxq_zip){
882 /* Update doorbell counter. */
883 rxq->rq_ci = wqe_n >> rxq->sges_n;
885 *rxq->rq_db = rte_cpu_to_be_32(rxq->rq_ci);
889 * Modify a Verbs/DevX queue state.
890 * This must be called from the primary process.
893 * Pointer to Ethernet device.
895 * State modify request parameters.
898 * 0 in case of success else non-zero value and rte_errno is set.
901 mlx5_queue_state_modify_primary(struct rte_eth_dev *dev,
902 const struct mlx5_mp_arg_queue_state_modify *sm)
905 struct mlx5_priv *priv = dev->data->dev_private;
908 struct mlx5_rxq_data *rxq = (*priv->rxqs)[sm->queue_id];
909 struct mlx5_rxq_ctrl *rxq_ctrl =
910 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
912 if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_IBV) {
913 struct ibv_wq_attr mod = {
914 .attr_mask = IBV_WQ_ATTR_STATE,
915 .wq_state = sm->state,
918 ret = mlx5_glue->modify_wq(rxq_ctrl->obj->wq, &mod);
919 } else { /* rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ. */
920 struct mlx5_devx_modify_rq_attr rq_attr;
922 memset(&rq_attr, 0, sizeof(rq_attr));
923 if (sm->state == IBV_WQS_RESET) {
924 rq_attr.rq_state = MLX5_RQC_STATE_ERR;
925 rq_attr.state = MLX5_RQC_STATE_RST;
926 } else if (sm->state == IBV_WQS_RDY) {
927 rq_attr.rq_state = MLX5_RQC_STATE_RST;
928 rq_attr.state = MLX5_RQC_STATE_RDY;
929 } else if (sm->state == IBV_WQS_ERR) {
930 rq_attr.rq_state = MLX5_RQC_STATE_RDY;
931 rq_attr.state = MLX5_RQC_STATE_ERR;
933 ret = mlx5_devx_cmd_modify_rq(rxq_ctrl->obj->rq,
937 DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s",
938 sm->state, strerror(errno));
943 struct mlx5_txq_data *txq = (*priv->txqs)[sm->queue_id];
944 struct mlx5_txq_ctrl *txq_ctrl =
945 container_of(txq, struct mlx5_txq_ctrl, txq);
946 struct ibv_qp_attr mod = {
947 .qp_state = IBV_QPS_RESET,
948 .port_num = (uint8_t)priv->ibv_port,
950 struct ibv_qp *qp = txq_ctrl->obj->qp;
952 ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
954 DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
955 "%s", strerror(errno));
959 mod.qp_state = IBV_QPS_INIT;
960 ret = mlx5_glue->modify_qp(qp, &mod,
961 (IBV_QP_STATE | IBV_QP_PORT));
963 DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
968 mod.qp_state = IBV_QPS_RTR;
969 ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
971 DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
976 mod.qp_state = IBV_QPS_RTS;
977 ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
979 DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
989 * Modify a Verbs queue state.
992 * Pointer to Ethernet device.
994 * State modify request parameters.
997 * 0 in case of success else non-zero value.
1000 mlx5_queue_state_modify(struct rte_eth_dev *dev,
1001 struct mlx5_mp_arg_queue_state_modify *sm)
1005 switch (rte_eal_process_type()) {
1006 case RTE_PROC_PRIMARY:
1007 ret = mlx5_queue_state_modify_primary(dev, sm);
1009 case RTE_PROC_SECONDARY:
1010 ret = mlx5_mp_req_queue_state_modify(dev, sm);
1019 * Handle a Rx error.
1020 * The function inserts the RQ state to reset when the first error CQE is
1021 * shown, then drains the CQ by the caller function loop. When the CQ is empty,
1022 * it moves the RQ state to ready and initializes the RQ.
1023 * Next CQE identification and error counting are in the caller responsibility.
1026 * Pointer to RX queue structure.
1028 * 1 when called from vectorized Rx burst, need to prepare mbufs for the RQ.
1029 * 0 when called from non-vectorized Rx burst.
1032 * -1 in case of recovery error, otherwise the CQE status.
1035 mlx5_rx_err_handle(struct mlx5_rxq_data *rxq, uint8_t vec)
1037 const uint16_t cqe_n = 1 << rxq->cqe_n;
1038 const uint16_t cqe_mask = cqe_n - 1;
1039 const unsigned int wqe_n = 1 << rxq->elts_n;
1040 struct mlx5_rxq_ctrl *rxq_ctrl =
1041 container_of(rxq, struct mlx5_rxq_ctrl, rxq);
1043 volatile struct mlx5_cqe *cqe;
1044 volatile struct mlx5_err_cqe *err_cqe;
1046 .cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_mask],
1048 struct mlx5_mp_arg_queue_state_modify sm;
1051 switch (rxq->err_state) {
1052 case MLX5_RXQ_ERR_STATE_NO_ERROR:
1053 rxq->err_state = MLX5_RXQ_ERR_STATE_NEED_RESET;
1055 case MLX5_RXQ_ERR_STATE_NEED_RESET:
1057 sm.queue_id = rxq->idx;
1058 sm.state = IBV_WQS_RESET;
1059 if (mlx5_queue_state_modify(ETH_DEV(rxq_ctrl->priv), &sm))
1061 if (rxq_ctrl->dump_file_n <
1062 rxq_ctrl->priv->config.max_dump_files_num) {
1063 MKSTR(err_str, "Unexpected CQE error syndrome "
1064 "0x%02x CQN = %u RQN = %u wqe_counter = %u"
1065 " rq_ci = %u cq_ci = %u", u.err_cqe->syndrome,
1066 rxq->cqn, rxq_ctrl->wqn,
1067 rte_be_to_cpu_16(u.err_cqe->wqe_counter),
1068 rxq->rq_ci << rxq->sges_n, rxq->cq_ci);
1069 MKSTR(name, "dpdk_mlx5_port_%u_rxq_%u_%u",
1070 rxq->port_id, rxq->idx, (uint32_t)rte_rdtsc());
1071 mlx5_dump_debug_information(name, NULL, err_str, 0);
1072 mlx5_dump_debug_information(name, "MLX5 Error CQ:",
1073 (const void *)((uintptr_t)
1075 sizeof(*u.cqe) * cqe_n);
1076 mlx5_dump_debug_information(name, "MLX5 Error RQ:",
1077 (const void *)((uintptr_t)
1080 rxq_ctrl->dump_file_n++;
1082 rxq->err_state = MLX5_RXQ_ERR_STATE_NEED_READY;
1084 case MLX5_RXQ_ERR_STATE_NEED_READY:
1085 ret = check_cqe(u.cqe, cqe_n, rxq->cq_ci);
1086 if (ret == MLX5_CQE_STATUS_HW_OWN) {
1088 *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
1091 * The RQ consumer index must be zeroed while moving
1092 * from RESET state to RDY state.
1094 *rxq->rq_db = rte_cpu_to_be_32(0);
1097 sm.queue_id = rxq->idx;
1098 sm.state = IBV_WQS_RDY;
1099 if (mlx5_queue_state_modify(ETH_DEV(rxq_ctrl->priv),
1103 const uint16_t q_mask = wqe_n - 1;
1105 struct rte_mbuf **elt;
1107 unsigned int n = wqe_n - (rxq->rq_ci -
1110 for (i = 0; i < (int)n; ++i) {
1111 elt_idx = (rxq->rq_ci + i) & q_mask;
1112 elt = &(*rxq->elts)[elt_idx];
1113 *elt = rte_mbuf_raw_alloc(rxq->mp);
1115 for (i--; i >= 0; --i) {
1116 elt_idx = (rxq->rq_ci +
1120 rte_pktmbuf_free_seg
1126 for (i = 0; i < (int)wqe_n; ++i) {
1127 elt = &(*rxq->elts)[i];
1129 (uint16_t)((*elt)->buf_len -
1130 rte_pktmbuf_headroom(*elt));
1132 /* Padding with a fake mbuf for vec Rx. */
1133 for (i = 0; i < MLX5_VPMD_DESCS_PER_LOOP; ++i)
1134 (*rxq->elts)[wqe_n + i] =
1137 mlx5_rxq_initialize(rxq);
1138 rxq->err_state = MLX5_RXQ_ERR_STATE_NO_ERROR;
1147 * Get size of the next packet for a given CQE. For compressed CQEs, the
1148 * consumer index is updated only once all packets of the current one have
1152 * Pointer to RX queue.
1156 * Store pointer to mini-CQE if compressed. Otherwise, the pointer is not
1160 * 0 in case of empty CQE, otherwise the packet size in bytes.
1163 mlx5_rx_poll_len(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cqe,
1164 uint16_t cqe_cnt, volatile struct mlx5_mini_cqe8 **mcqe)
1166 struct rxq_zip *zip = &rxq->zip;
1167 uint16_t cqe_n = cqe_cnt + 1;
1173 /* Process compressed data in the CQE and mini arrays. */
1175 volatile struct mlx5_mini_cqe8 (*mc)[8] =
1176 (volatile struct mlx5_mini_cqe8 (*)[8])
1177 (uintptr_t)(&(*rxq->cqes)[zip->ca &
1180 len = rte_be_to_cpu_32((*mc)[zip->ai & 7].byte_cnt);
1181 *mcqe = &(*mc)[zip->ai & 7];
1182 if ((++zip->ai & 7) == 0) {
1183 /* Invalidate consumed CQEs */
1186 while (idx != end) {
1187 (*rxq->cqes)[idx & cqe_cnt].op_own =
1188 MLX5_CQE_INVALIDATE;
1192 * Increment consumer index to skip the number
1193 * of CQEs consumed. Hardware leaves holes in
1194 * the CQ ring for software use.
1199 if (unlikely(rxq->zip.ai == rxq->zip.cqe_cnt)) {
1200 /* Invalidate the rest */
1204 while (idx != end) {
1205 (*rxq->cqes)[idx & cqe_cnt].op_own =
1206 MLX5_CQE_INVALIDATE;
1209 rxq->cq_ci = zip->cq_ci;
1213 * No compressed data, get next CQE and verify if it is
1220 ret = check_cqe(cqe, cqe_n, rxq->cq_ci);
1221 if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
1222 if (unlikely(ret == MLX5_CQE_STATUS_ERR ||
1224 ret = mlx5_rx_err_handle(rxq, 0);
1225 if (ret == MLX5_CQE_STATUS_HW_OWN ||
1233 op_own = cqe->op_own;
1234 if (MLX5_CQE_FORMAT(op_own) == MLX5_COMPRESSED) {
1235 volatile struct mlx5_mini_cqe8 (*mc)[8] =
1236 (volatile struct mlx5_mini_cqe8 (*)[8])
1237 (uintptr_t)(&(*rxq->cqes)
1241 /* Fix endianness. */
1242 zip->cqe_cnt = rte_be_to_cpu_32(cqe->byte_cnt);
1244 * Current mini array position is the one
1245 * returned by check_cqe64().
1247 * If completion comprises several mini arrays,
1248 * as a special case the second one is located
1249 * 7 CQEs after the initial CQE instead of 8
1250 * for subsequent ones.
1252 zip->ca = rxq->cq_ci;
1253 zip->na = zip->ca + 7;
1254 /* Compute the next non compressed CQE. */
1256 zip->cq_ci = rxq->cq_ci + zip->cqe_cnt;
1257 /* Get packet size to return. */
1258 len = rte_be_to_cpu_32((*mc)[0].byte_cnt);
1261 /* Prefetch all to be invalidated */
1264 while (idx != end) {
1265 rte_prefetch0(&(*rxq->cqes)[(idx) &
1270 len = rte_be_to_cpu_32(cqe->byte_cnt);
1273 if (unlikely(rxq->err_state)) {
1274 cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_cnt];
1275 ++rxq->stats.idropped;
1283 * Translate RX completion flags to offload flags.
1289 * Offload flags (ol_flags) for struct rte_mbuf.
1291 static inline uint32_t
1292 rxq_cq_to_ol_flags(volatile struct mlx5_cqe *cqe)
1294 uint32_t ol_flags = 0;
1295 uint16_t flags = rte_be_to_cpu_16(cqe->hdr_type_etc);
1299 MLX5_CQE_RX_L3_HDR_VALID,
1300 PKT_RX_IP_CKSUM_GOOD) |
1302 MLX5_CQE_RX_L4_HDR_VALID,
1303 PKT_RX_L4_CKSUM_GOOD);
1308 * Fill in mbuf fields from RX completion flags.
1309 * Note that pkt->ol_flags should be initialized outside of this function.
1312 * Pointer to RX queue.
1317 * @param rss_hash_res
1318 * Packet RSS Hash result.
1321 rxq_cq_to_mbuf(struct mlx5_rxq_data *rxq, struct rte_mbuf *pkt,
1322 volatile struct mlx5_cqe *cqe, uint32_t rss_hash_res)
1324 /* Update packet information. */
1325 pkt->packet_type = rxq_cq_to_pkt_type(rxq, cqe);
1326 if (rss_hash_res && rxq->rss_hash) {
1327 pkt->hash.rss = rss_hash_res;
1328 pkt->ol_flags |= PKT_RX_RSS_HASH;
1330 if (rxq->mark && MLX5_FLOW_MARK_IS_VALID(cqe->sop_drop_qpn)) {
1331 pkt->ol_flags |= PKT_RX_FDIR;
1332 if (cqe->sop_drop_qpn !=
1333 rte_cpu_to_be_32(MLX5_FLOW_MARK_DEFAULT)) {
1334 uint32_t mark = cqe->sop_drop_qpn;
1336 pkt->ol_flags |= PKT_RX_FDIR_ID;
1337 pkt->hash.fdir.hi = mlx5_flow_mark_get(mark);
1340 if (rte_flow_dynf_metadata_avail() && cqe->flow_table_metadata) {
1341 pkt->ol_flags |= PKT_RX_DYNF_METADATA;
1342 *RTE_FLOW_DYNF_METADATA(pkt) = cqe->flow_table_metadata;
1345 pkt->ol_flags |= rxq_cq_to_ol_flags(cqe);
1346 if (rxq->vlan_strip &&
1347 (cqe->hdr_type_etc & rte_cpu_to_be_16(MLX5_CQE_VLAN_STRIPPED))) {
1348 pkt->ol_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
1349 pkt->vlan_tci = rte_be_to_cpu_16(cqe->vlan_info);
1351 if (rxq->hw_timestamp) {
1352 pkt->timestamp = rte_be_to_cpu_64(cqe->timestamp);
1353 pkt->ol_flags |= PKT_RX_TIMESTAMP;
1358 * DPDK callback for RX.
1361 * Generic pointer to RX queue structure.
1363 * Array to store received packets.
1365 * Maximum number of packets in array.
1368 * Number of packets successfully received (<= pkts_n).
1371 mlx5_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
1373 struct mlx5_rxq_data *rxq = dpdk_rxq;
1374 const unsigned int wqe_cnt = (1 << rxq->elts_n) - 1;
1375 const unsigned int cqe_cnt = (1 << rxq->cqe_n) - 1;
1376 const unsigned int sges_n = rxq->sges_n;
1377 struct rte_mbuf *pkt = NULL;
1378 struct rte_mbuf *seg = NULL;
1379 volatile struct mlx5_cqe *cqe =
1380 &(*rxq->cqes)[rxq->cq_ci & cqe_cnt];
1382 unsigned int rq_ci = rxq->rq_ci << sges_n;
1383 int len = 0; /* keep its value across iterations. */
1386 unsigned int idx = rq_ci & wqe_cnt;
1387 volatile struct mlx5_wqe_data_seg *wqe =
1388 &((volatile struct mlx5_wqe_data_seg *)rxq->wqes)[idx];
1389 struct rte_mbuf *rep = (*rxq->elts)[idx];
1390 volatile struct mlx5_mini_cqe8 *mcqe = NULL;
1391 uint32_t rss_hash_res;
1399 rep = rte_mbuf_raw_alloc(rxq->mp);
1400 if (unlikely(rep == NULL)) {
1401 ++rxq->stats.rx_nombuf;
1404 * no buffers before we even started,
1405 * bail out silently.
1409 while (pkt != seg) {
1410 MLX5_ASSERT(pkt != (*rxq->elts)[idx]);
1414 rte_mbuf_raw_free(pkt);
1420 cqe = &(*rxq->cqes)[rxq->cq_ci & cqe_cnt];
1421 len = mlx5_rx_poll_len(rxq, cqe, cqe_cnt, &mcqe);
1423 rte_mbuf_raw_free(rep);
1427 MLX5_ASSERT(len >= (rxq->crc_present << 2));
1428 pkt->ol_flags &= EXT_ATTACHED_MBUF;
1429 /* If compressed, take hash result from mini-CQE. */
1430 rss_hash_res = rte_be_to_cpu_32(mcqe == NULL ?
1432 mcqe->rx_hash_result);
1433 rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
1434 if (rxq->crc_present)
1435 len -= RTE_ETHER_CRC_LEN;
1437 if (cqe->lro_num_seg > 1) {
1439 (rte_pktmbuf_mtod(pkt, uint8_t *), cqe,
1441 pkt->ol_flags |= PKT_RX_LRO;
1442 pkt->tso_segsz = len / cqe->lro_num_seg;
1445 DATA_LEN(rep) = DATA_LEN(seg);
1446 PKT_LEN(rep) = PKT_LEN(seg);
1447 SET_DATA_OFF(rep, DATA_OFF(seg));
1448 PORT(rep) = PORT(seg);
1449 (*rxq->elts)[idx] = rep;
1451 * Fill NIC descriptor with the new buffer. The lkey and size
1452 * of the buffers are already known, only the buffer address
1455 wqe->addr = rte_cpu_to_be_64(rte_pktmbuf_mtod(rep, uintptr_t));
1456 /* If there's only one MR, no need to replace LKey in WQE. */
1457 if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1))
1458 wqe->lkey = mlx5_rx_mb2mr(rxq, rep);
1459 if (len > DATA_LEN(seg)) {
1460 len -= DATA_LEN(seg);
1465 DATA_LEN(seg) = len;
1466 #ifdef MLX5_PMD_SOFT_COUNTERS
1467 /* Increment bytes counter. */
1468 rxq->stats.ibytes += PKT_LEN(pkt);
1470 /* Return packet. */
1475 /* Align consumer index to the next stride. */
1480 if (unlikely((i == 0) && ((rq_ci >> sges_n) == rxq->rq_ci)))
1482 /* Update the consumer index. */
1483 rxq->rq_ci = rq_ci >> sges_n;
1485 *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
1487 *rxq->rq_db = rte_cpu_to_be_32(rxq->rq_ci);
1488 #ifdef MLX5_PMD_SOFT_COUNTERS
1489 /* Increment packets counter. */
1490 rxq->stats.ipackets += i;
1496 * Update LRO packet TCP header.
1497 * The HW LRO feature doesn't update the TCP header after coalescing the
1498 * TCP segments but supplies information in CQE to fill it by SW.
1501 * Pointer to the TCP header.
1503 * Pointer to the completion entry..
1505 * The L3 pseudo-header checksum.
1508 mlx5_lro_update_tcp_hdr(struct rte_tcp_hdr *restrict tcp,
1509 volatile struct mlx5_cqe *restrict cqe,
1512 uint8_t l4_type = (rte_be_to_cpu_16(cqe->hdr_type_etc) &
1513 MLX5_CQE_L4_TYPE_MASK) >> MLX5_CQE_L4_TYPE_SHIFT;
1515 * The HW calculates only the TCP payload checksum, need to complete
1516 * the TCP header checksum and the L3 pseudo-header checksum.
1518 uint32_t csum = phcsum + cqe->csum;
1520 if (l4_type == MLX5_L4_HDR_TYPE_TCP_EMPTY_ACK ||
1521 l4_type == MLX5_L4_HDR_TYPE_TCP_WITH_ACL) {
1522 tcp->tcp_flags |= RTE_TCP_ACK_FLAG;
1523 tcp->recv_ack = cqe->lro_ack_seq_num;
1524 tcp->rx_win = cqe->lro_tcp_win;
1526 if (cqe->lro_tcppsh_abort_dupack & MLX5_CQE_LRO_PUSH_MASK)
1527 tcp->tcp_flags |= RTE_TCP_PSH_FLAG;
1529 csum += rte_raw_cksum(tcp, (tcp->data_off & 0xF) * 4);
1530 csum = ((csum & 0xffff0000) >> 16) + (csum & 0xffff);
1531 csum = (~csum) & 0xffff;
1538 * Update LRO packet headers.
1539 * The HW LRO feature doesn't update the L3/TCP headers after coalescing the
1540 * TCP segments but supply information in CQE to fill it by SW.
1543 * The packet address.
1545 * Pointer to the completion entry..
1547 * The packet length.
1550 mlx5_lro_update_hdr(uint8_t *restrict padd,
1551 volatile struct mlx5_cqe *restrict cqe,
1555 struct rte_ether_hdr *eth;
1556 struct rte_vlan_hdr *vlan;
1557 struct rte_ipv4_hdr *ipv4;
1558 struct rte_ipv6_hdr *ipv6;
1559 struct rte_tcp_hdr *tcp;
1564 uint16_t proto = h.eth->ether_type;
1568 while (proto == RTE_BE16(RTE_ETHER_TYPE_VLAN) ||
1569 proto == RTE_BE16(RTE_ETHER_TYPE_QINQ)) {
1570 proto = h.vlan->eth_proto;
1573 if (proto == RTE_BE16(RTE_ETHER_TYPE_IPV4)) {
1574 h.ipv4->time_to_live = cqe->lro_min_ttl;
1575 h.ipv4->total_length = rte_cpu_to_be_16(len - (h.hdr - padd));
1576 h.ipv4->hdr_checksum = 0;
1577 h.ipv4->hdr_checksum = rte_ipv4_cksum(h.ipv4);
1578 phcsum = rte_ipv4_phdr_cksum(h.ipv4, 0);
1581 h.ipv6->hop_limits = cqe->lro_min_ttl;
1582 h.ipv6->payload_len = rte_cpu_to_be_16(len - (h.hdr - padd) -
1584 phcsum = rte_ipv6_phdr_cksum(h.ipv6, 0);
1587 mlx5_lro_update_tcp_hdr(h.tcp, cqe, phcsum);
1591 mlx5_mprq_buf_free_cb(void *addr __rte_unused, void *opaque)
1593 struct mlx5_mprq_buf *buf = opaque;
1595 if (rte_atomic16_read(&buf->refcnt) == 1) {
1596 rte_mempool_put(buf->mp, buf);
1597 } else if (rte_atomic16_add_return(&buf->refcnt, -1) == 0) {
1598 rte_atomic16_set(&buf->refcnt, 1);
1599 rte_mempool_put(buf->mp, buf);
1604 mlx5_mprq_buf_free(struct mlx5_mprq_buf *buf)
1606 mlx5_mprq_buf_free_cb(NULL, buf);
1610 mprq_buf_replace(struct mlx5_rxq_data *rxq, uint16_t rq_idx,
1611 const unsigned int strd_n)
1613 struct mlx5_mprq_buf *rep = rxq->mprq_repl;
1614 volatile struct mlx5_wqe_data_seg *wqe =
1615 &((volatile struct mlx5_wqe_mprq *)rxq->wqes)[rq_idx].dseg;
1618 MLX5_ASSERT(rep != NULL);
1619 /* Replace MPRQ buf. */
1620 (*rxq->mprq_bufs)[rq_idx] = rep;
1622 addr = mlx5_mprq_buf_addr(rep, strd_n);
1623 wqe->addr = rte_cpu_to_be_64((uintptr_t)addr);
1624 /* If there's only one MR, no need to replace LKey in WQE. */
1625 if (unlikely(mlx5_mr_btree_len(&rxq->mr_ctrl.cache_bh) > 1))
1626 wqe->lkey = mlx5_rx_addr2mr(rxq, (uintptr_t)addr);
1627 /* Stash a mbuf for next replacement. */
1628 if (likely(!rte_mempool_get(rxq->mprq_mp, (void **)&rep)))
1629 rxq->mprq_repl = rep;
1631 rxq->mprq_repl = NULL;
1635 * DPDK callback for RX with Multi-Packet RQ support.
1638 * Generic pointer to RX queue structure.
1640 * Array to store received packets.
1642 * Maximum number of packets in array.
1645 * Number of packets successfully received (<= pkts_n).
1648 mlx5_rx_burst_mprq(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
1650 struct mlx5_rxq_data *rxq = dpdk_rxq;
1651 const unsigned int strd_n = 1 << rxq->strd_num_n;
1652 const unsigned int strd_sz = 1 << rxq->strd_sz_n;
1653 const unsigned int strd_shift =
1654 MLX5_MPRQ_STRIDE_SHIFT_BYTE * rxq->strd_shift_en;
1655 const unsigned int cq_mask = (1 << rxq->cqe_n) - 1;
1656 const unsigned int wq_mask = (1 << rxq->elts_n) - 1;
1657 volatile struct mlx5_cqe *cqe = &(*rxq->cqes)[rxq->cq_ci & cq_mask];
1659 uint32_t rq_ci = rxq->rq_ci;
1660 uint16_t consumed_strd = rxq->consumed_strd;
1661 uint16_t headroom_sz = rxq->strd_headroom_en * RTE_PKTMBUF_HEADROOM;
1662 struct mlx5_mprq_buf *buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
1664 while (i < pkts_n) {
1665 struct rte_mbuf *pkt;
1673 volatile struct mlx5_mini_cqe8 *mcqe = NULL;
1674 uint32_t rss_hash_res = 0;
1675 uint8_t lro_num_seg;
1677 if (consumed_strd == strd_n) {
1678 /* Replace WQE only if the buffer is still in use. */
1679 if (rte_atomic16_read(&buf->refcnt) > 1) {
1680 mprq_buf_replace(rxq, rq_ci & wq_mask, strd_n);
1681 /* Release the old buffer. */
1682 mlx5_mprq_buf_free(buf);
1683 } else if (unlikely(rxq->mprq_repl == NULL)) {
1684 struct mlx5_mprq_buf *rep;
1687 * Currently, the MPRQ mempool is out of buffer
1688 * and doing memcpy regardless of the size of Rx
1689 * packet. Retry allocation to get back to
1692 if (!rte_mempool_get(rxq->mprq_mp,
1694 rxq->mprq_repl = rep;
1696 /* Advance to the next WQE. */
1699 buf = (*rxq->mprq_bufs)[rq_ci & wq_mask];
1701 cqe = &(*rxq->cqes)[rxq->cq_ci & cq_mask];
1702 ret = mlx5_rx_poll_len(rxq, cqe, cq_mask, &mcqe);
1706 strd_cnt = (byte_cnt & MLX5_MPRQ_STRIDE_NUM_MASK) >>
1707 MLX5_MPRQ_STRIDE_NUM_SHIFT;
1708 MLX5_ASSERT(strd_cnt);
1709 consumed_strd += strd_cnt;
1710 if (byte_cnt & MLX5_MPRQ_FILLER_MASK)
1713 rss_hash_res = rte_be_to_cpu_32(cqe->rx_hash_res);
1714 strd_idx = rte_be_to_cpu_16(cqe->wqe_counter);
1716 /* mini-CQE for MPRQ doesn't have hash result. */
1717 strd_idx = rte_be_to_cpu_16(mcqe->stride_idx);
1719 MLX5_ASSERT(strd_idx < strd_n);
1720 MLX5_ASSERT(!((rte_be_to_cpu_16(cqe->wqe_id) ^ rq_ci) &
1722 lro_num_seg = cqe->lro_num_seg;
1724 * Currently configured to receive a packet per a stride. But if
1725 * MTU is adjusted through kernel interface, device could
1726 * consume multiple strides without raising an error. In this
1727 * case, the packet should be dropped because it is bigger than
1728 * the max_rx_pkt_len.
1730 if (unlikely(!lro_num_seg && strd_cnt > 1)) {
1731 ++rxq->stats.idropped;
1734 pkt = rte_pktmbuf_alloc(rxq->mp);
1735 if (unlikely(pkt == NULL)) {
1736 ++rxq->stats.rx_nombuf;
1739 len = (byte_cnt & MLX5_MPRQ_LEN_MASK) >> MLX5_MPRQ_LEN_SHIFT;
1740 MLX5_ASSERT((int)len >= (rxq->crc_present << 2));
1741 if (rxq->crc_present)
1742 len -= RTE_ETHER_CRC_LEN;
1743 offset = strd_idx * strd_sz + strd_shift;
1744 addr = RTE_PTR_ADD(mlx5_mprq_buf_addr(buf, strd_n), offset);
1746 * Memcpy packets to the target mbuf if:
1747 * - The size of packet is smaller than mprq_max_memcpy_len.
1748 * - Out of buffer in the Mempool for Multi-Packet RQ.
1750 if (len <= rxq->mprq_max_memcpy_len || rxq->mprq_repl == NULL) {
1752 * When memcpy'ing packet due to out-of-buffer, the
1753 * packet must be smaller than the target mbuf.
1755 if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
1756 rte_pktmbuf_free_seg(pkt);
1757 ++rxq->stats.idropped;
1760 rte_memcpy(rte_pktmbuf_mtod(pkt, void *), addr, len);
1761 DATA_LEN(pkt) = len;
1763 rte_iova_t buf_iova;
1764 struct rte_mbuf_ext_shared_info *shinfo;
1765 uint16_t buf_len = strd_cnt * strd_sz;
1768 /* Increment the refcnt of the whole chunk. */
1769 rte_atomic16_add_return(&buf->refcnt, 1);
1770 MLX5_ASSERT((uint16_t)rte_atomic16_read(&buf->refcnt) <=
1772 buf_addr = RTE_PTR_SUB(addr, headroom_sz);
1774 * MLX5 device doesn't use iova but it is necessary in a
1775 * case where the Rx packet is transmitted via a
1778 buf_iova = rte_mempool_virt2iova(buf) +
1779 RTE_PTR_DIFF(buf_addr, buf);
1780 shinfo = &buf->shinfos[strd_idx];
1781 rte_mbuf_ext_refcnt_set(shinfo, 1);
1783 * EXT_ATTACHED_MBUF will be set to pkt->ol_flags when
1784 * attaching the stride to mbuf and more offload flags
1785 * will be added below by calling rxq_cq_to_mbuf().
1786 * Other fields will be overwritten.
1788 rte_pktmbuf_attach_extbuf(pkt, buf_addr, buf_iova,
1790 /* Set mbuf head-room. */
1791 pkt->data_off = headroom_sz;
1792 MLX5_ASSERT(pkt->ol_flags == EXT_ATTACHED_MBUF);
1794 * Prevent potential overflow due to MTU change through
1797 if (unlikely(rte_pktmbuf_tailroom(pkt) < len)) {
1798 rte_pktmbuf_free_seg(pkt);
1799 ++rxq->stats.idropped;
1802 DATA_LEN(pkt) = len;
1804 * LRO packet may consume all the stride memory, in this
1805 * case packet head-room space is not guaranteed so must
1806 * to add an empty mbuf for the head-room.
1808 if (!rxq->strd_headroom_en) {
1809 struct rte_mbuf *headroom_mbuf =
1810 rte_pktmbuf_alloc(rxq->mp);
1812 if (unlikely(headroom_mbuf == NULL)) {
1813 rte_pktmbuf_free_seg(pkt);
1814 ++rxq->stats.rx_nombuf;
1817 PORT(pkt) = rxq->port_id;
1818 NEXT(headroom_mbuf) = pkt;
1819 pkt = headroom_mbuf;
1823 rxq_cq_to_mbuf(rxq, pkt, cqe, rss_hash_res);
1824 if (lro_num_seg > 1) {
1825 mlx5_lro_update_hdr(addr, cqe, len);
1826 pkt->ol_flags |= PKT_RX_LRO;
1827 pkt->tso_segsz = strd_sz;
1830 PORT(pkt) = rxq->port_id;
1831 #ifdef MLX5_PMD_SOFT_COUNTERS
1832 /* Increment bytes counter. */
1833 rxq->stats.ibytes += PKT_LEN(pkt);
1835 /* Return packet. */
1839 /* Update the consumer indexes. */
1840 rxq->consumed_strd = consumed_strd;
1842 *rxq->cq_db = rte_cpu_to_be_32(rxq->cq_ci);
1843 if (rq_ci != rxq->rq_ci) {
1846 *rxq->rq_db = rte_cpu_to_be_32(rxq->rq_ci);
1848 #ifdef MLX5_PMD_SOFT_COUNTERS
1849 /* Increment packets counter. */
1850 rxq->stats.ipackets += i;
1856 * Dummy DPDK callback for TX.
1858 * This function is used to temporarily replace the real callback during
1859 * unsafe control operations on the queue, or in case of error.
1862 * Generic pointer to TX queue structure.
1864 * Packets to transmit.
1866 * Number of packets in array.
1869 * Number of packets successfully transmitted (<= pkts_n).
1872 removed_tx_burst(void *dpdk_txq __rte_unused,
1873 struct rte_mbuf **pkts __rte_unused,
1874 uint16_t pkts_n __rte_unused)
1881 * Dummy DPDK callback for RX.
1883 * This function is used to temporarily replace the real callback during
1884 * unsafe control operations on the queue, or in case of error.
1887 * Generic pointer to RX queue structure.
1889 * Array to store received packets.
1891 * Maximum number of packets in array.
1894 * Number of packets successfully received (<= pkts_n).
1897 removed_rx_burst(void *dpdk_txq __rte_unused,
1898 struct rte_mbuf **pkts __rte_unused,
1899 uint16_t pkts_n __rte_unused)
1906 * Vectorized Rx/Tx routines are not compiled in when required vector
1907 * instructions are not supported on a target architecture. The following null
1908 * stubs are needed for linkage when those are not included outside of this file
1909 * (e.g. mlx5_rxtx_vec_sse.c for x86).
1913 mlx5_rx_burst_vec(void *dpdk_txq __rte_unused,
1914 struct rte_mbuf **pkts __rte_unused,
1915 uint16_t pkts_n __rte_unused)
1921 mlx5_rxq_check_vec_support(struct mlx5_rxq_data *rxq __rte_unused)
1927 mlx5_check_vec_rx_support(struct rte_eth_dev *dev __rte_unused)
1933 * Free the mbufs from the linear array of pointers.
1936 * Pointer to array of packets to be free.
1938 * Number of packets to be freed.
1940 * Configured Tx offloads mask. It is fully defined at
1941 * compile time and may be used for optimization.
1943 static __rte_always_inline void
1944 mlx5_tx_free_mbuf(struct rte_mbuf **restrict pkts,
1945 unsigned int pkts_n,
1946 unsigned int olx __rte_unused)
1948 struct rte_mempool *pool = NULL;
1949 struct rte_mbuf **p_free = NULL;
1950 struct rte_mbuf *mbuf;
1951 unsigned int n_free = 0;
1954 * The implemented algorithm eliminates
1955 * copying pointers to temporary array
1956 * for rte_mempool_put_bulk() calls.
1959 MLX5_ASSERT(pkts_n);
1963 * Decrement mbuf reference counter, detach
1964 * indirect and external buffers if needed.
1966 mbuf = rte_pktmbuf_prefree_seg(*pkts);
1967 if (likely(mbuf != NULL)) {
1968 MLX5_ASSERT(mbuf == *pkts);
1969 if (likely(n_free != 0)) {
1970 if (unlikely(pool != mbuf->pool))
1971 /* From different pool. */
1974 /* Start new scan array. */
1981 if (unlikely(pkts_n == 0)) {
1987 * This happens if mbuf is still referenced.
1988 * We can't put it back to the pool, skip.
1992 if (unlikely(n_free != 0))
1993 /* There is some array to free.*/
1995 if (unlikely(pkts_n == 0))
1996 /* Last mbuf, nothing to free. */
2002 * This loop is implemented to avoid multiple
2003 * inlining of rte_mempool_put_bulk().
2006 MLX5_ASSERT(p_free);
2007 MLX5_ASSERT(n_free);
2009 * Free the array of pre-freed mbufs
2010 * belonging to the same memory pool.
2012 rte_mempool_put_bulk(pool, (void *)p_free, n_free);
2013 if (unlikely(mbuf != NULL)) {
2014 /* There is the request to start new scan. */
2019 if (likely(pkts_n != 0))
2022 * This is the last mbuf to be freed.
2023 * Do one more loop iteration to complete.
2024 * This is rare case of the last unique mbuf.
2029 if (likely(pkts_n == 0))
2038 * Free the mbuf from the elts ring buffer till new tail.
2041 * Pointer to Tx queue structure.
2043 * Index in elts to free up to, becomes new elts tail.
2045 * Configured Tx offloads mask. It is fully defined at
2046 * compile time and may be used for optimization.
2048 static __rte_always_inline void
2049 mlx5_tx_free_elts(struct mlx5_txq_data *restrict txq,
2051 unsigned int olx __rte_unused)
2053 uint16_t n_elts = tail - txq->elts_tail;
2055 MLX5_ASSERT(n_elts);
2056 MLX5_ASSERT(n_elts <= txq->elts_s);
2058 * Implement a loop to support ring buffer wraparound
2059 * with single inlining of mlx5_tx_free_mbuf().
2064 part = txq->elts_s - (txq->elts_tail & txq->elts_m);
2065 part = RTE_MIN(part, n_elts);
2067 MLX5_ASSERT(part <= txq->elts_s);
2068 mlx5_tx_free_mbuf(&txq->elts[txq->elts_tail & txq->elts_m],
2070 txq->elts_tail += part;
2076 * Store the mbuf being sent into elts ring buffer.
2077 * On Tx completion these mbufs will be freed.
2080 * Pointer to Tx queue structure.
2082 * Pointer to array of packets to be stored.
2084 * Number of packets to be stored.
2086 * Configured Tx offloads mask. It is fully defined at
2087 * compile time and may be used for optimization.
2089 static __rte_always_inline void
2090 mlx5_tx_copy_elts(struct mlx5_txq_data *restrict txq,
2091 struct rte_mbuf **restrict pkts,
2092 unsigned int pkts_n,
2093 unsigned int olx __rte_unused)
2096 struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
2099 MLX5_ASSERT(pkts_n);
2100 part = txq->elts_s - (txq->elts_head & txq->elts_m);
2102 MLX5_ASSERT(part <= txq->elts_s);
2103 /* This code is a good candidate for vectorizing with SIMD. */
2104 rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
2106 RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
2107 txq->elts_head += pkts_n;
2108 if (unlikely(part < pkts_n))
2109 /* The copy is wrapping around the elts array. */
2110 rte_memcpy((void *)elts, (void *)(pkts + part),
2111 (pkts_n - part) * sizeof(struct rte_mbuf *));
2115 * Update completion queue consuming index via doorbell
2116 * and flush the completed data buffers.
2119 * Pointer to TX queue structure.
2120 * @param valid CQE pointer
2121 * if not NULL update txq->wqe_pi and flush the buffers
2123 * Configured Tx offloads mask. It is fully defined at
2124 * compile time and may be used for optimization.
2126 static __rte_always_inline void
2127 mlx5_tx_comp_flush(struct mlx5_txq_data *restrict txq,
2128 volatile struct mlx5_cqe *last_cqe,
2129 unsigned int olx __rte_unused)
2131 if (likely(last_cqe != NULL)) {
2134 txq->wqe_pi = rte_be_to_cpu_16(last_cqe->wqe_counter);
2135 tail = txq->fcqs[(txq->cq_ci - 1) & txq->cqe_m];
2136 if (likely(tail != txq->elts_tail)) {
2137 mlx5_tx_free_elts(txq, tail, olx);
2138 MLX5_ASSERT(tail == txq->elts_tail);
2144 * Manage TX completions. This routine checks the CQ for
2145 * arrived CQEs, deduces the last accomplished WQE in SQ,
2146 * updates SQ producing index and frees all completed mbufs.
2149 * Pointer to TX queue structure.
2151 * Configured Tx offloads mask. It is fully defined at
2152 * compile time and may be used for optimization.
2154 * NOTE: not inlined intentionally, it makes tx_burst
2155 * routine smaller, simple and faster - from experiments.
2158 mlx5_tx_handle_completion(struct mlx5_txq_data *restrict txq,
2159 unsigned int olx __rte_unused)
2161 unsigned int count = MLX5_TX_COMP_MAX_CQE;
2162 volatile struct mlx5_cqe *last_cqe = NULL;
2163 uint16_t ci = txq->cq_ci;
2166 static_assert(MLX5_CQE_STATUS_HW_OWN < 0, "Must be negative value");
2167 static_assert(MLX5_CQE_STATUS_SW_OWN < 0, "Must be negative value");
2169 volatile struct mlx5_cqe *cqe;
2171 cqe = &txq->cqes[ci & txq->cqe_m];
2172 ret = check_cqe(cqe, txq->cqe_s, ci);
2173 if (unlikely(ret != MLX5_CQE_STATUS_SW_OWN)) {
2174 if (likely(ret != MLX5_CQE_STATUS_ERR)) {
2175 /* No new CQEs in completion queue. */
2176 MLX5_ASSERT(ret == MLX5_CQE_STATUS_HW_OWN);
2180 * Some error occurred, try to restart.
2181 * We have no barrier after WQE related Doorbell
2182 * written, make sure all writes are completed
2183 * here, before we might perform SQ reset.
2187 ret = mlx5_tx_error_cqe_handle
2188 (txq, (volatile struct mlx5_err_cqe *)cqe);
2189 if (unlikely(ret < 0)) {
2191 * Some error occurred on queue error
2192 * handling, we do not advance the index
2193 * here, allowing to retry on next call.
2198 * We are going to fetch all entries with
2199 * MLX5_CQE_SYNDROME_WR_FLUSH_ERR status.
2200 * The send queue is supposed to be empty.
2207 /* Normal transmit completion. */
2208 MLX5_ASSERT(ci != txq->cq_pi);
2209 MLX5_ASSERT((txq->fcqs[ci & txq->cqe_m] >> 16) ==
2214 * We have to restrict the amount of processed CQEs
2215 * in one tx_burst routine call. The CQ may be large
2216 * and many CQEs may be updated by the NIC in one
2217 * transaction. Buffers freeing is time consuming,
2218 * multiple iterations may introduce significant
2221 if (likely(--count == 0))
2224 if (likely(ci != txq->cq_ci)) {
2226 * Update completion queue consuming index
2227 * and ring doorbell to notify hardware.
2229 rte_compiler_barrier();
2231 *txq->cq_db = rte_cpu_to_be_32(ci);
2232 mlx5_tx_comp_flush(txq, last_cqe, olx);
2237 * Check if the completion request flag should be set in the last WQE.
2238 * Both pushed mbufs and WQEs are monitored and the completion request
2239 * flag is set if any of thresholds is reached.
2242 * Pointer to TX queue structure.
2244 * Pointer to burst routine local context.
2246 * Configured Tx offloads mask. It is fully defined at
2247 * compile time and may be used for optimization.
2249 static __rte_always_inline void
2250 mlx5_tx_request_completion(struct mlx5_txq_data *restrict txq,
2251 struct mlx5_txq_local *restrict loc,
2254 uint16_t head = txq->elts_head;
2257 part = MLX5_TXOFF_CONFIG(INLINE) ?
2258 0 : loc->pkts_sent - loc->pkts_copy;
2260 if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
2261 (MLX5_TXOFF_CONFIG(INLINE) &&
2262 (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
2263 volatile struct mlx5_wqe *last = loc->wqe_last;
2265 txq->elts_comp = head;
2266 if (MLX5_TXOFF_CONFIG(INLINE))
2267 txq->wqe_comp = txq->wqe_ci;
2268 /* Request unconditional completion on last WQE. */
2269 last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
2270 MLX5_COMP_MODE_OFFSET);
2271 /* Save elts_head in dedicated free on completion queue. */
2272 #ifdef RTE_LIBRTE_MLX5_DEBUG
2273 txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
2274 (last->cseg.opcode >> 8) << 16;
2276 txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
2278 /* A CQE slot must always be available. */
2279 MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
2284 * DPDK callback to check the status of a tx descriptor.
2289 * The index of the descriptor in the ring.
2292 * The status of the tx descriptor.
2295 mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset)
2297 struct mlx5_txq_data *restrict txq = tx_queue;
2300 mlx5_tx_handle_completion(txq, 0);
2301 used = txq->elts_head - txq->elts_tail;
2303 return RTE_ETH_TX_DESC_FULL;
2304 return RTE_ETH_TX_DESC_DONE;
2308 * Build the Control Segment with specified opcode:
2309 * - MLX5_OPCODE_SEND
2310 * - MLX5_OPCODE_ENHANCED_MPSW
2314 * Pointer to TX queue structure.
2316 * Pointer to burst routine local context.
2318 * Pointer to WQE to fill with built Control Segment.
2320 * Supposed length of WQE in segments.
2322 * SQ WQE opcode to put into Control Segment.
2324 * Configured Tx offloads mask. It is fully defined at
2325 * compile time and may be used for optimization.
2327 static __rte_always_inline void
2328 mlx5_tx_cseg_init(struct mlx5_txq_data *restrict txq,
2329 struct mlx5_txq_local *restrict loc __rte_unused,
2330 struct mlx5_wqe *restrict wqe,
2332 unsigned int opcode,
2333 unsigned int olx __rte_unused)
2335 struct mlx5_wqe_cseg *restrict cs = &wqe->cseg;
2337 /* For legacy MPW replace the EMPW by TSO with modifier. */
2338 if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
2339 opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
2340 cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
2341 cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
2342 cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
2343 MLX5_COMP_MODE_OFFSET);
2344 cs->misc = RTE_BE32(0);
2348 * Build the Ethernet Segment without inlined data.
2349 * Supports Software Parser, Checksums and VLAN
2350 * insertion Tx offload features.
2353 * Pointer to TX queue structure.
2355 * Pointer to burst routine local context.
2357 * Pointer to WQE to fill with built Ethernet Segment.
2359 * Configured Tx offloads mask. It is fully defined at
2360 * compile time and may be used for optimization.
2362 static __rte_always_inline void
2363 mlx5_tx_eseg_none(struct mlx5_txq_data *restrict txq __rte_unused,
2364 struct mlx5_txq_local *restrict loc,
2365 struct mlx5_wqe *restrict wqe,
2368 struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
2372 * Calculate and set check sum flags first, dword field
2373 * in segment may be shared with Software Parser flags.
2375 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
2376 es->flags = rte_cpu_to_le_32(csum);
2378 * Calculate and set Software Parser offsets and flags.
2379 * These flags a set for custom UDP and IP tunnel packets.
2381 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
2382 /* Fill metadata field if needed. */
2383 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
2384 loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
2385 *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
2386 /* Engage VLAN tag insertion feature if requested. */
2387 if (MLX5_TXOFF_CONFIG(VLAN) &&
2388 loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
2390 * We should get here only if device support
2391 * this feature correctly.
2393 MLX5_ASSERT(txq->vlan_en);
2394 es->inline_hdr = rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
2395 loc->mbuf->vlan_tci);
2397 es->inline_hdr = RTE_BE32(0);
2402 * Build the Ethernet Segment with minimal inlined data
2403 * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
2404 * used to fill the gap in single WQEBB WQEs.
2405 * Supports Software Parser, Checksums and VLAN
2406 * insertion Tx offload features.
2409 * Pointer to TX queue structure.
2411 * Pointer to burst routine local context.
2413 * Pointer to WQE to fill with built Ethernet Segment.
2415 * Length of VLAN tag insertion if any.
2417 * Configured Tx offloads mask. It is fully defined at
2418 * compile time and may be used for optimization.
2420 static __rte_always_inline void
2421 mlx5_tx_eseg_dmin(struct mlx5_txq_data *restrict txq __rte_unused,
2422 struct mlx5_txq_local *restrict loc,
2423 struct mlx5_wqe *restrict wqe,
2427 struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
2429 uint8_t *psrc, *pdst;
2432 * Calculate and set check sum flags first, dword field
2433 * in segment may be shared with Software Parser flags.
2435 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
2436 es->flags = rte_cpu_to_le_32(csum);
2438 * Calculate and set Software Parser offsets and flags.
2439 * These flags a set for custom UDP and IP tunnel packets.
2441 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
2442 /* Fill metadata field if needed. */
2443 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
2444 loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
2445 *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
2446 static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
2448 sizeof(rte_v128u32_t)),
2449 "invalid Ethernet Segment data size");
2450 static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
2452 sizeof(struct rte_vlan_hdr) +
2453 2 * RTE_ETHER_ADDR_LEN),
2454 "invalid Ethernet Segment data size");
2455 psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
2456 es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
2457 es->inline_data = *(unaligned_uint16_t *)psrc;
2458 psrc += sizeof(uint16_t);
2459 pdst = (uint8_t *)(es + 1);
2460 if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
2461 /* Implement VLAN tag insertion as part inline data. */
2462 memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
2463 pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
2464 psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
2465 /* Insert VLAN ethertype + VLAN tag. */
2466 *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
2467 ((RTE_ETHER_TYPE_VLAN << 16) |
2468 loc->mbuf->vlan_tci);
2469 pdst += sizeof(struct rte_vlan_hdr);
2470 /* Copy the rest two bytes from packet data. */
2471 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
2472 *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
2474 /* Fill the gap in the title WQEBB with inline data. */
2475 rte_mov16(pdst, psrc);
2480 * Build the Ethernet Segment with entire packet
2481 * data inlining. Checks the boundary of WQEBB and
2482 * ring buffer wrapping, supports Software Parser,
2483 * Checksums and VLAN insertion Tx offload features.
2486 * Pointer to TX queue structure.
2488 * Pointer to burst routine local context.
2490 * Pointer to WQE to fill with built Ethernet Segment.
2492 * Length of VLAN tag insertion if any.
2494 * Length of data to inline (VLAN included, if any).
2496 * TSO flag, set mss field from the packet.
2498 * Configured Tx offloads mask. It is fully defined at
2499 * compile time and may be used for optimization.
2502 * Pointer to the next Data Segment (aligned and wrapped around).
2504 static __rte_always_inline struct mlx5_wqe_dseg *
2505 mlx5_tx_eseg_data(struct mlx5_txq_data *restrict txq,
2506 struct mlx5_txq_local *restrict loc,
2507 struct mlx5_wqe *restrict wqe,
2513 struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
2515 uint8_t *psrc, *pdst;
2519 * Calculate and set check sum flags first, dword field
2520 * in segment may be shared with Software Parser flags.
2522 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
2525 csum |= loc->mbuf->tso_segsz;
2526 es->flags = rte_cpu_to_be_32(csum);
2528 es->flags = rte_cpu_to_le_32(csum);
2531 * Calculate and set Software Parser offsets and flags.
2532 * These flags a set for custom UDP and IP tunnel packets.
2534 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
2535 /* Fill metadata field if needed. */
2536 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
2537 loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
2538 *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
2539 static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
2541 sizeof(rte_v128u32_t)),
2542 "invalid Ethernet Segment data size");
2543 static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
2545 sizeof(struct rte_vlan_hdr) +
2546 2 * RTE_ETHER_ADDR_LEN),
2547 "invalid Ethernet Segment data size");
2548 psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
2549 es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
2550 es->inline_data = *(unaligned_uint16_t *)psrc;
2551 psrc += sizeof(uint16_t);
2552 pdst = (uint8_t *)(es + 1);
2553 if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
2554 /* Implement VLAN tag insertion as part inline data. */
2555 memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
2556 pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
2557 psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
2558 /* Insert VLAN ethertype + VLAN tag. */
2559 *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
2560 ((RTE_ETHER_TYPE_VLAN << 16) |
2561 loc->mbuf->vlan_tci);
2562 pdst += sizeof(struct rte_vlan_hdr);
2563 /* Copy the rest two bytes from packet data. */
2564 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
2565 *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
2566 psrc += sizeof(uint16_t);
2568 /* Fill the gap in the title WQEBB with inline data. */
2569 rte_mov16(pdst, psrc);
2570 psrc += sizeof(rte_v128u32_t);
2572 pdst = (uint8_t *)(es + 2);
2573 MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
2574 MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
2575 inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
2577 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
2578 return (struct mlx5_wqe_dseg *)pdst;
2581 * The WQEBB space availability is checked by caller.
2582 * Here we should be aware of WQE ring buffer wraparound only.
2584 part = (uint8_t *)txq->wqes_end - pdst;
2585 part = RTE_MIN(part, inlen);
2587 rte_memcpy(pdst, psrc, part);
2589 if (likely(!inlen)) {
2591 * If return value is not used by the caller
2592 * the code below will be optimized out.
2595 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
2596 if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
2597 pdst = (uint8_t *)txq->wqes;
2598 return (struct mlx5_wqe_dseg *)pdst;
2600 pdst = (uint8_t *)txq->wqes;
2607 * Copy data from chain of mbuf to the specified linear buffer.
2608 * Checksums and VLAN insertion Tx offload features. If data
2609 * from some mbuf copied completely this mbuf is freed. Local
2610 * structure is used to keep the byte stream state.
2613 * Pointer to the destination linear buffer.
2615 * Pointer to burst routine local context.
2617 * Length of data to be copied.
2619 * Length of data to be copied ignoring no inline hint.
2621 * Configured Tx offloads mask. It is fully defined at
2622 * compile time and may be used for optimization.
2625 * Number of actual copied data bytes. This is always greater than or
2626 * equal to must parameter and might be lesser than len in no inline
2627 * hint flag is encountered.
2629 static __rte_always_inline unsigned int
2630 mlx5_tx_mseg_memcpy(uint8_t *pdst,
2631 struct mlx5_txq_local *restrict loc,
2634 unsigned int olx __rte_unused)
2636 struct rte_mbuf *mbuf;
2637 unsigned int part, dlen, copy = 0;
2641 MLX5_ASSERT(must <= len);
2643 /* Allow zero length packets, must check first. */
2644 dlen = rte_pktmbuf_data_len(loc->mbuf);
2645 if (dlen <= loc->mbuf_off) {
2646 /* Exhausted packet, just free. */
2648 loc->mbuf = mbuf->next;
2649 rte_pktmbuf_free_seg(mbuf);
2651 MLX5_ASSERT(loc->mbuf_nseg > 1);
2652 MLX5_ASSERT(loc->mbuf);
2654 if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
2659 * We already copied the minimal
2660 * requested amount of data.
2665 if (diff <= rte_pktmbuf_data_len(loc->mbuf)) {
2667 * Copy only the minimal required
2668 * part of the data buffer.
2675 dlen -= loc->mbuf_off;
2676 psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
2678 part = RTE_MIN(len, dlen);
2679 rte_memcpy(pdst, psrc, part);
2681 loc->mbuf_off += part;
2684 if (loc->mbuf_off >= rte_pktmbuf_data_len(loc->mbuf)) {
2686 /* Exhausted packet, just free. */
2688 loc->mbuf = mbuf->next;
2689 rte_pktmbuf_free_seg(mbuf);
2691 MLX5_ASSERT(loc->mbuf_nseg >= 1);
2701 * Build the Ethernet Segment with inlined data from
2702 * multi-segment packet. Checks the boundary of WQEBB
2703 * and ring buffer wrapping, supports Software Parser,
2704 * Checksums and VLAN insertion Tx offload features.
2707 * Pointer to TX queue structure.
2709 * Pointer to burst routine local context.
2711 * Pointer to WQE to fill with built Ethernet Segment.
2713 * Length of VLAN tag insertion if any.
2715 * Length of data to inline (VLAN included, if any).
2717 * TSO flag, set mss field from the packet.
2719 * Configured Tx offloads mask. It is fully defined at
2720 * compile time and may be used for optimization.
2723 * Pointer to the next Data Segment (aligned and
2724 * possible NOT wrapped around - caller should do
2725 * wrapping check on its own).
2727 static __rte_always_inline struct mlx5_wqe_dseg *
2728 mlx5_tx_eseg_mdat(struct mlx5_txq_data *restrict txq,
2729 struct mlx5_txq_local *restrict loc,
2730 struct mlx5_wqe *restrict wqe,
2736 struct mlx5_wqe_eseg *restrict es = &wqe->eseg;
2739 unsigned int part, tlen = 0;
2742 * Calculate and set check sum flags first, uint32_t field
2743 * in segment may be shared with Software Parser flags.
2745 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
2748 csum |= loc->mbuf->tso_segsz;
2749 es->flags = rte_cpu_to_be_32(csum);
2751 es->flags = rte_cpu_to_le_32(csum);
2754 * Calculate and set Software Parser offsets and flags.
2755 * These flags a set for custom UDP and IP tunnel packets.
2757 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
2758 /* Fill metadata field if needed. */
2759 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
2760 loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
2761 *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0 : 0;
2762 static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
2764 sizeof(rte_v128u32_t)),
2765 "invalid Ethernet Segment data size");
2766 static_assert(MLX5_ESEG_MIN_INLINE_SIZE ==
2768 sizeof(struct rte_vlan_hdr) +
2769 2 * RTE_ETHER_ADDR_LEN),
2770 "invalid Ethernet Segment data size");
2771 MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
2772 pdst = (uint8_t *)&es->inline_data;
2773 if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
2774 /* Implement VLAN tag insertion as part inline data. */
2775 mlx5_tx_mseg_memcpy(pdst, loc,
2776 2 * RTE_ETHER_ADDR_LEN,
2777 2 * RTE_ETHER_ADDR_LEN, olx);
2778 pdst += 2 * RTE_ETHER_ADDR_LEN;
2779 *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
2780 ((RTE_ETHER_TYPE_VLAN << 16) |
2781 loc->mbuf->vlan_tci);
2782 pdst += sizeof(struct rte_vlan_hdr);
2783 tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct rte_vlan_hdr);
2785 MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
2787 * The WQEBB space availability is checked by caller.
2788 * Here we should be aware of WQE ring buffer wraparound only.
2790 part = (uint8_t *)txq->wqes_end - pdst;
2791 part = RTE_MIN(part, inlen - tlen);
2797 * Copying may be interrupted inside the routine
2798 * if run into no inline hint flag.
2800 copy = tlen >= txq->inlen_mode ? 0 : (txq->inlen_mode - tlen);
2801 copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
2803 if (likely(inlen <= tlen) || copy < part) {
2804 es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
2806 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
2807 return (struct mlx5_wqe_dseg *)pdst;
2809 pdst = (uint8_t *)txq->wqes;
2810 part = inlen - tlen;
2815 * Build the Data Segment of pointer type.
2818 * Pointer to TX queue structure.
2820 * Pointer to burst routine local context.
2822 * Pointer to WQE to fill with built Data Segment.
2824 * Data buffer to point.
2826 * Data buffer length.
2828 * Configured Tx offloads mask. It is fully defined at
2829 * compile time and may be used for optimization.
2831 static __rte_always_inline void
2832 mlx5_tx_dseg_ptr(struct mlx5_txq_data *restrict txq,
2833 struct mlx5_txq_local *restrict loc,
2834 struct mlx5_wqe_dseg *restrict dseg,
2837 unsigned int olx __rte_unused)
2841 dseg->bcount = rte_cpu_to_be_32(len);
2842 dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
2843 dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
2847 * Build the Data Segment of pointer type or inline
2848 * if data length is less than buffer in minimal
2849 * Data Segment size.
2852 * Pointer to TX queue structure.
2854 * Pointer to burst routine local context.
2856 * Pointer to WQE to fill with built Data Segment.
2858 * Data buffer to point.
2860 * Data buffer length.
2862 * Configured Tx offloads mask. It is fully defined at
2863 * compile time and may be used for optimization.
2865 static __rte_always_inline void
2866 mlx5_tx_dseg_iptr(struct mlx5_txq_data *restrict txq,
2867 struct mlx5_txq_local *restrict loc,
2868 struct mlx5_wqe_dseg *restrict dseg,
2871 unsigned int olx __rte_unused)
2877 if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
2878 dseg->bcount = rte_cpu_to_be_32(len);
2879 dseg->lkey = mlx5_tx_mb2mr(txq, loc->mbuf);
2880 dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
2884 dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
2885 /* Unrolled implementation of generic rte_memcpy. */
2886 dst = (uintptr_t)&dseg->inline_data[0];
2887 src = (uintptr_t)buf;
2889 #ifdef RTE_ARCH_STRICT_ALIGN
2890 MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
2891 *(uint32_t *)dst = *(unaligned_uint32_t *)src;
2892 dst += sizeof(uint32_t);
2893 src += sizeof(uint32_t);
2894 *(uint32_t *)dst = *(unaligned_uint32_t *)src;
2895 dst += sizeof(uint32_t);
2896 src += sizeof(uint32_t);
2898 *(uint64_t *)dst = *(unaligned_uint64_t *)src;
2899 dst += sizeof(uint64_t);
2900 src += sizeof(uint64_t);
2904 *(uint32_t *)dst = *(unaligned_uint32_t *)src;
2905 dst += sizeof(uint32_t);
2906 src += sizeof(uint32_t);
2909 *(uint16_t *)dst = *(unaligned_uint16_t *)src;
2910 dst += sizeof(uint16_t);
2911 src += sizeof(uint16_t);
2914 *(uint8_t *)dst = *(uint8_t *)src;
2918 * Build the Data Segment of inlined data from single
2919 * segment packet, no VLAN insertion.
2922 * Pointer to TX queue structure.
2924 * Pointer to burst routine local context.
2926 * Pointer to WQE to fill with built Data Segment.
2928 * Data buffer to point.
2930 * Data buffer length.
2932 * Configured Tx offloads mask. It is fully defined at
2933 * compile time and may be used for optimization.
2936 * Pointer to the next Data Segment after inlined data.
2937 * Ring buffer wraparound check is needed. We do not
2938 * do it here because it may not be needed for the
2939 * last packet in the eMPW session.
2941 static __rte_always_inline struct mlx5_wqe_dseg *
2942 mlx5_tx_dseg_empw(struct mlx5_txq_data *restrict txq,
2943 struct mlx5_txq_local *restrict loc __rte_unused,
2944 struct mlx5_wqe_dseg *restrict dseg,
2947 unsigned int olx __rte_unused)
2952 dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
2953 pdst = &dseg->inline_data[0];
2955 * The WQEBB space availability is checked by caller.
2956 * Here we should be aware of WQE ring buffer wraparound only.
2958 part = (uint8_t *)txq->wqes_end - pdst;
2959 part = RTE_MIN(part, len);
2961 rte_memcpy(pdst, buf, part);
2965 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
2966 /* Note: no final wraparound check here. */
2967 return (struct mlx5_wqe_dseg *)pdst;
2969 pdst = (uint8_t *)txq->wqes;
2976 * Build the Data Segment of inlined data from single
2977 * segment packet with VLAN insertion.
2980 * Pointer to TX queue structure.
2982 * Pointer to burst routine local context.
2984 * Pointer to the dseg fill with built Data Segment.
2986 * Data buffer to point.
2988 * Data buffer length.
2990 * Configured Tx offloads mask. It is fully defined at
2991 * compile time and may be used for optimization.
2994 * Pointer to the next Data Segment after inlined data.
2995 * Ring buffer wraparound check is needed.
2997 static __rte_always_inline struct mlx5_wqe_dseg *
2998 mlx5_tx_dseg_vlan(struct mlx5_txq_data *restrict txq,
2999 struct mlx5_txq_local *restrict loc __rte_unused,
3000 struct mlx5_wqe_dseg *restrict dseg,
3003 unsigned int olx __rte_unused)
3009 MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
3010 static_assert(MLX5_DSEG_MIN_INLINE_SIZE ==
3011 (2 * RTE_ETHER_ADDR_LEN),
3012 "invalid Data Segment data size");
3013 dseg->bcount = rte_cpu_to_be_32((len + sizeof(struct rte_vlan_hdr)) |
3014 MLX5_ETH_WQE_DATA_INLINE);
3015 pdst = &dseg->inline_data[0];
3016 memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
3017 buf += MLX5_DSEG_MIN_INLINE_SIZE;
3018 pdst += MLX5_DSEG_MIN_INLINE_SIZE;
3019 len -= MLX5_DSEG_MIN_INLINE_SIZE;
3020 /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
3021 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
3022 if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
3023 pdst = (uint8_t *)txq->wqes;
3024 *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
3025 loc->mbuf->vlan_tci);
3026 pdst += sizeof(struct rte_vlan_hdr);
3028 * The WQEBB space availability is checked by caller.
3029 * Here we should be aware of WQE ring buffer wraparound only.
3031 part = (uint8_t *)txq->wqes_end - pdst;
3032 part = RTE_MIN(part, len);
3034 rte_memcpy(pdst, buf, part);
3038 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
3039 /* Note: no final wraparound check here. */
3040 return (struct mlx5_wqe_dseg *)pdst;
3042 pdst = (uint8_t *)txq->wqes;
3049 * Build the Ethernet Segment with optionally inlined data with
3050 * VLAN insertion and following Data Segments (if any) from
3051 * multi-segment packet. Used by ordinary send and TSO.
3054 * Pointer to TX queue structure.
3056 * Pointer to burst routine local context.
3058 * Pointer to WQE to fill with built Ethernet/Data Segments.
3060 * Length of VLAN header to insert, 0 means no VLAN insertion.
3062 * Data length to inline. For TSO this parameter specifies
3063 * exact value, for ordinary send routine can be aligned by
3064 * caller to provide better WQE space saving and data buffer
3065 * start address alignment. This length includes VLAN header
3068 * Zero means ordinary send, inlined data can be extended,
3069 * otherwise this is TSO, inlined data length is fixed.
3071 * Configured Tx offloads mask. It is fully defined at
3072 * compile time and may be used for optimization.
3075 * Actual size of built WQE in segments.
3077 static __rte_always_inline unsigned int
3078 mlx5_tx_mseg_build(struct mlx5_txq_data *restrict txq,
3079 struct mlx5_txq_local *restrict loc,
3080 struct mlx5_wqe *restrict wqe,
3084 unsigned int olx __rte_unused)
3086 struct mlx5_wqe_dseg *restrict dseg;
3089 MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
3090 loc->mbuf_nseg = NB_SEGS(loc->mbuf);
3093 dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
3094 if (!loc->mbuf_nseg)
3097 * There are still some mbuf remaining, not inlined.
3098 * The first mbuf may be partially inlined and we
3099 * must process the possible non-zero data offset.
3101 if (loc->mbuf_off) {
3106 * Exhausted packets must be dropped before.
3107 * Non-zero offset means there are some data
3108 * remained in the packet.
3110 MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc->mbuf));
3111 MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
3112 dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
3114 dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
3116 * Build the pointer/minimal data Data Segment.
3117 * Do ring buffer wrapping check in advance.
3119 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
3120 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
3121 mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
3122 /* Store the mbuf to be freed on completion. */
3123 MLX5_ASSERT(loc->elts_free);
3124 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
3127 if (--loc->mbuf_nseg == 0)
3129 loc->mbuf = loc->mbuf->next;
3133 if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
3134 struct rte_mbuf *mbuf;
3136 /* Zero length segment found, just skip. */
3138 loc->mbuf = loc->mbuf->next;
3139 rte_pktmbuf_free_seg(mbuf);
3140 if (--loc->mbuf_nseg == 0)
3143 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
3144 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
3147 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
3148 rte_pktmbuf_data_len(loc->mbuf), olx);
3149 MLX5_ASSERT(loc->elts_free);
3150 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
3153 if (--loc->mbuf_nseg == 0)
3155 loc->mbuf = loc->mbuf->next;
3160 /* Calculate actual segments used from the dseg pointer. */
3161 if ((uintptr_t)wqe < (uintptr_t)dseg)
3162 ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
3164 ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
3165 txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
3170 * Tx one packet function for multi-segment TSO. Supports all
3171 * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
3172 * sends one packet per WQE.
3174 * This routine is responsible for storing processed mbuf
3175 * into elts ring buffer and update elts_head.
3178 * Pointer to TX queue structure.
3180 * Pointer to burst routine local context.
3182 * Configured Tx offloads mask. It is fully defined at
3183 * compile time and may be used for optimization.
3186 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
3187 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
3188 * Local context variables partially updated.
3190 static __rte_always_inline enum mlx5_txcmp_code
3191 mlx5_tx_packet_multi_tso(struct mlx5_txq_data *restrict txq,
3192 struct mlx5_txq_local *restrict loc,
3195 struct mlx5_wqe *restrict wqe;
3196 unsigned int ds, dlen, inlen, ntcp, vlan = 0;
3199 * Calculate data length to be inlined to estimate
3200 * the required space in WQE ring buffer.
3202 dlen = rte_pktmbuf_pkt_len(loc->mbuf);
3203 if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
3204 vlan = sizeof(struct rte_vlan_hdr);
3205 inlen = loc->mbuf->l2_len + vlan +
3206 loc->mbuf->l3_len + loc->mbuf->l4_len;
3207 if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
3208 return MLX5_TXCMP_CODE_ERROR;
3209 if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
3210 inlen += loc->mbuf->outer_l2_len + loc->mbuf->outer_l3_len;
3211 /* Packet must contain all TSO headers. */
3212 if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
3213 inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
3214 inlen > (dlen + vlan)))
3215 return MLX5_TXCMP_CODE_ERROR;
3216 MLX5_ASSERT(inlen >= txq->inlen_mode);
3218 * Check whether there are enough free WQEBBs:
3220 * - Ethernet Segment
3221 * - First Segment of inlined Ethernet data
3222 * - ... data continued ...
3223 * - Data Segments of pointer/min inline type
3225 ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
3226 MLX5_ESEG_MIN_INLINE_SIZE +
3228 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
3229 if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
3230 return MLX5_TXCMP_CODE_EXIT;
3231 /* Check for maximal WQE size. */
3232 if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
3233 return MLX5_TXCMP_CODE_ERROR;
3234 #ifdef MLX5_PMD_SOFT_COUNTERS
3235 /* Update sent data bytes/packets counters. */
3236 ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
3237 loc->mbuf->tso_segsz;
3239 * One will be added for mbuf itself
3240 * at the end of the mlx5_tx_burst from
3241 * loc->pkts_sent field.
3244 txq->stats.opackets += ntcp;
3245 txq->stats.obytes += dlen + vlan + ntcp * inlen;
3247 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3248 loc->wqe_last = wqe;
3249 mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
3250 ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
3251 wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
3252 txq->wqe_ci += (ds + 3) / 4;
3253 loc->wqe_free -= (ds + 3) / 4;
3254 return MLX5_TXCMP_CODE_MULTI;
3258 * Tx one packet function for multi-segment SEND. Supports all
3259 * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
3260 * sends one packet per WQE, without any data inlining in
3263 * This routine is responsible for storing processed mbuf
3264 * into elts ring buffer and update elts_head.
3267 * Pointer to TX queue structure.
3269 * Pointer to burst routine local context.
3271 * Configured Tx offloads mask. It is fully defined at
3272 * compile time and may be used for optimization.
3275 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
3276 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
3277 * Local context variables partially updated.
3279 static __rte_always_inline enum mlx5_txcmp_code
3280 mlx5_tx_packet_multi_send(struct mlx5_txq_data *restrict txq,
3281 struct mlx5_txq_local *restrict loc,
3284 struct mlx5_wqe_dseg *restrict dseg;
3285 struct mlx5_wqe *restrict wqe;
3286 unsigned int ds, nseg;
3288 MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
3290 * No inline at all, it means the CPU cycles saving
3291 * is prioritized at configuration, we should not
3292 * copy any packet data to WQE.
3294 nseg = NB_SEGS(loc->mbuf);
3296 if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
3297 return MLX5_TXCMP_CODE_EXIT;
3298 /* Check for maximal WQE size. */
3299 if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
3300 return MLX5_TXCMP_CODE_ERROR;
3302 * Some Tx offloads may cause an error if
3303 * packet is not long enough, check against
3304 * assumed minimal length.
3306 if (rte_pktmbuf_pkt_len(loc->mbuf) <= MLX5_ESEG_MIN_INLINE_SIZE)
3307 return MLX5_TXCMP_CODE_ERROR;
3308 #ifdef MLX5_PMD_SOFT_COUNTERS
3309 /* Update sent data bytes counter. */
3310 txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
3311 if (MLX5_TXOFF_CONFIG(VLAN) &&
3312 loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
3313 txq->stats.obytes += sizeof(struct rte_vlan_hdr);
3316 * SEND WQE, one WQEBB:
3317 * - Control Segment, SEND opcode
3318 * - Ethernet Segment, optional VLAN, no inline
3319 * - Data Segments, pointer only type
3321 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3322 loc->wqe_last = wqe;
3323 mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
3324 mlx5_tx_eseg_none(txq, loc, wqe, olx);
3325 dseg = &wqe->dseg[0];
3327 if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
3328 struct rte_mbuf *mbuf;
3331 * Zero length segment found, have to
3332 * correct total size of WQE in segments.
3333 * It is supposed to be rare occasion, so
3334 * in normal case (no zero length segments)
3335 * we avoid extra writing to the Control
3339 wqe->cseg.sq_ds -= RTE_BE32(1);
3341 loc->mbuf = mbuf->next;
3342 rte_pktmbuf_free_seg(mbuf);
3348 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
3349 rte_pktmbuf_data_len(loc->mbuf), olx);
3350 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
3355 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
3356 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
3357 loc->mbuf = loc->mbuf->next;
3360 txq->wqe_ci += (ds + 3) / 4;
3361 loc->wqe_free -= (ds + 3) / 4;
3362 return MLX5_TXCMP_CODE_MULTI;
3366 * Tx one packet function for multi-segment SEND. Supports all
3367 * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
3368 * sends one packet per WQE, with data inlining in
3369 * Ethernet Segment and minimal Data Segments.
3371 * This routine is responsible for storing processed mbuf
3372 * into elts ring buffer and update elts_head.
3375 * Pointer to TX queue structure.
3377 * Pointer to burst routine local context.
3379 * Configured Tx offloads mask. It is fully defined at
3380 * compile time and may be used for optimization.
3383 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
3384 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
3385 * Local context variables partially updated.
3387 static __rte_always_inline enum mlx5_txcmp_code
3388 mlx5_tx_packet_multi_inline(struct mlx5_txq_data *restrict txq,
3389 struct mlx5_txq_local *restrict loc,
3392 struct mlx5_wqe *restrict wqe;
3393 unsigned int ds, inlen, dlen, vlan = 0;
3395 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
3396 MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
3398 * First calculate data length to be inlined
3399 * to estimate the required space for WQE.
3401 dlen = rte_pktmbuf_pkt_len(loc->mbuf);
3402 if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
3403 vlan = sizeof(struct rte_vlan_hdr);
3404 inlen = dlen + vlan;
3405 /* Check against minimal length. */
3406 if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
3407 return MLX5_TXCMP_CODE_ERROR;
3408 MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
3409 if (inlen > txq->inlen_send ||
3410 loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE) {
3411 struct rte_mbuf *mbuf;
3416 * Packet length exceeds the allowed inline
3417 * data length, check whether the minimal
3418 * inlining is required.
3420 if (txq->inlen_mode) {
3421 MLX5_ASSERT(txq->inlen_mode >=
3422 MLX5_ESEG_MIN_INLINE_SIZE);
3423 MLX5_ASSERT(txq->inlen_mode <= txq->inlen_send);
3424 inlen = txq->inlen_mode;
3426 if (loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE ||
3427 !vlan || txq->vlan_en) {
3429 * VLAN insertion will be done inside by HW.
3430 * It is not utmost effective - VLAN flag is
3431 * checked twice, but we should proceed the
3432 * inlining length correctly and take into
3433 * account the VLAN header being inserted.
3435 return mlx5_tx_packet_multi_send
3438 inlen = MLX5_ESEG_MIN_INLINE_SIZE;
3441 * Now we know the minimal amount of data is requested
3442 * to inline. Check whether we should inline the buffers
3443 * from the chain beginning to eliminate some mbufs.
3446 nxlen = rte_pktmbuf_data_len(mbuf);
3447 if (unlikely(nxlen <= txq->inlen_send)) {
3448 /* We can inline first mbuf at least. */
3449 if (nxlen < inlen) {
3452 /* Scan mbufs till inlen filled. */
3457 nxlen = rte_pktmbuf_data_len(mbuf);
3459 } while (unlikely(nxlen < inlen));
3460 if (unlikely(nxlen > txq->inlen_send)) {
3461 /* We cannot inline entire mbuf. */
3462 smlen = inlen - smlen;
3463 start = rte_pktmbuf_mtod_offset
3464 (mbuf, uintptr_t, smlen);
3471 /* There should be not end of packet. */
3473 nxlen = inlen + rte_pktmbuf_data_len(mbuf);
3474 } while (unlikely(nxlen < txq->inlen_send));
3476 start = rte_pktmbuf_mtod(mbuf, uintptr_t);
3478 * Check whether we can do inline to align start
3479 * address of data buffer to cacheline.
3482 start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
3483 if (unlikely(start)) {
3485 if (start <= txq->inlen_send)
3490 * Check whether there are enough free WQEBBs:
3492 * - Ethernet Segment
3493 * - First Segment of inlined Ethernet data
3494 * - ... data continued ...
3495 * - Data Segments of pointer/min inline type
3497 * Estimate the number of Data Segments conservatively,
3498 * supposing no any mbufs is being freed during inlining.
3500 MLX5_ASSERT(inlen <= txq->inlen_send);
3501 ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
3502 MLX5_ESEG_MIN_INLINE_SIZE +
3504 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
3505 if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
3506 return MLX5_TXCMP_CODE_EXIT;
3507 /* Check for maximal WQE size. */
3508 if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
3509 return MLX5_TXCMP_CODE_ERROR;
3510 #ifdef MLX5_PMD_SOFT_COUNTERS
3511 /* Update sent data bytes/packets counters. */
3512 txq->stats.obytes += dlen + vlan;
3514 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3515 loc->wqe_last = wqe;
3516 mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
3517 ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
3518 wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
3519 txq->wqe_ci += (ds + 3) / 4;
3520 loc->wqe_free -= (ds + 3) / 4;
3521 return MLX5_TXCMP_CODE_MULTI;
3525 * Tx burst function for multi-segment packets. Supports all
3526 * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
3527 * sends one packet per WQE. Function stops sending if it
3528 * encounters the single-segment packet.
3530 * This routine is responsible for storing processed mbuf
3531 * into elts ring buffer and update elts_head.
3534 * Pointer to TX queue structure.
3536 * Packets to transmit.
3538 * Number of packets in array.
3540 * Pointer to burst routine local context.
3542 * Configured Tx offloads mask. It is fully defined at
3543 * compile time and may be used for optimization.
3546 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
3547 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
3548 * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
3549 * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
3550 * Local context variables updated.
3552 static __rte_always_inline enum mlx5_txcmp_code
3553 mlx5_tx_burst_mseg(struct mlx5_txq_data *restrict txq,
3554 struct rte_mbuf **restrict pkts,
3555 unsigned int pkts_n,
3556 struct mlx5_txq_local *restrict loc,
3559 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
3560 MLX5_ASSERT(pkts_n > loc->pkts_sent);
3561 pkts += loc->pkts_sent + 1;
3562 pkts_n -= loc->pkts_sent;
3564 enum mlx5_txcmp_code ret;
3566 MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
3568 * Estimate the number of free elts quickly but
3569 * conservatively. Some segment may be fully inlined
3570 * and freed, ignore this here - precise estimation
3573 if (loc->elts_free < NB_SEGS(loc->mbuf))
3574 return MLX5_TXCMP_CODE_EXIT;
3575 if (MLX5_TXOFF_CONFIG(TSO) &&
3576 unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)) {
3577 /* Proceed with multi-segment TSO. */
3578 ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
3579 } else if (MLX5_TXOFF_CONFIG(INLINE)) {
3580 /* Proceed with multi-segment SEND with inlining. */
3581 ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
3583 /* Proceed with multi-segment SEND w/o inlining. */
3584 ret = mlx5_tx_packet_multi_send(txq, loc, olx);
3586 if (ret == MLX5_TXCMP_CODE_EXIT)
3587 return MLX5_TXCMP_CODE_EXIT;
3588 if (ret == MLX5_TXCMP_CODE_ERROR)
3589 return MLX5_TXCMP_CODE_ERROR;
3590 /* WQE is built, go to the next packet. */
3593 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
3594 return MLX5_TXCMP_CODE_EXIT;
3595 loc->mbuf = *pkts++;
3597 rte_prefetch0(*pkts);
3598 if (likely(NB_SEGS(loc->mbuf) > 1))
3600 /* Here ends the series of multi-segment packets. */
3601 if (MLX5_TXOFF_CONFIG(TSO) &&
3602 unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
3603 return MLX5_TXCMP_CODE_TSO;
3604 return MLX5_TXCMP_CODE_SINGLE;
3610 * Tx burst function for single-segment packets with TSO.
3611 * Supports all types of Tx offloads, except multi-packets.
3612 * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
3613 * Function stops sending if it encounters the multi-segment
3614 * packet or packet without TSO requested.
3616 * The routine is responsible for storing processed mbuf
3617 * into elts ring buffer and update elts_head if inline
3618 * offloads is requested due to possible early freeing
3619 * of the inlined mbufs (can not store pkts array in elts
3623 * Pointer to TX queue structure.
3625 * Packets to transmit.
3627 * Number of packets in array.
3629 * Pointer to burst routine local context.
3631 * Configured Tx offloads mask. It is fully defined at
3632 * compile time and may be used for optimization.
3635 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
3636 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
3637 * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
3638 * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
3639 * Local context variables updated.
3641 static __rte_always_inline enum mlx5_txcmp_code
3642 mlx5_tx_burst_tso(struct mlx5_txq_data *restrict txq,
3643 struct rte_mbuf **restrict pkts,
3644 unsigned int pkts_n,
3645 struct mlx5_txq_local *restrict loc,
3648 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
3649 MLX5_ASSERT(pkts_n > loc->pkts_sent);
3650 pkts += loc->pkts_sent + 1;
3651 pkts_n -= loc->pkts_sent;
3653 struct mlx5_wqe_dseg *restrict dseg;
3654 struct mlx5_wqe *restrict wqe;
3655 unsigned int ds, dlen, hlen, ntcp, vlan = 0;
3658 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
3659 dlen = rte_pktmbuf_data_len(loc->mbuf);
3660 if (MLX5_TXOFF_CONFIG(VLAN) &&
3661 loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
3662 vlan = sizeof(struct rte_vlan_hdr);
3665 * First calculate the WQE size to check
3666 * whether we have enough space in ring buffer.
3668 hlen = loc->mbuf->l2_len + vlan +
3669 loc->mbuf->l3_len + loc->mbuf->l4_len;
3670 if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
3671 return MLX5_TXCMP_CODE_ERROR;
3672 if (loc->mbuf->ol_flags & PKT_TX_TUNNEL_MASK)
3673 hlen += loc->mbuf->outer_l2_len +
3674 loc->mbuf->outer_l3_len;
3675 /* Segment must contain all TSO headers. */
3676 if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
3677 hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
3678 hlen > (dlen + vlan)))
3679 return MLX5_TXCMP_CODE_ERROR;
3681 * Check whether there are enough free WQEBBs:
3683 * - Ethernet Segment
3684 * - First Segment of inlined Ethernet data
3685 * - ... data continued ...
3686 * - Finishing Data Segment of pointer type
3688 ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
3689 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
3690 if (loc->wqe_free < ((ds + 3) / 4))
3691 return MLX5_TXCMP_CODE_EXIT;
3692 #ifdef MLX5_PMD_SOFT_COUNTERS
3693 /* Update sent data bytes/packets counters. */
3694 ntcp = (dlen + vlan - hlen +
3695 loc->mbuf->tso_segsz - 1) /
3696 loc->mbuf->tso_segsz;
3698 * One will be added for mbuf itself at the end
3699 * of the mlx5_tx_burst from loc->pkts_sent field.
3702 txq->stats.opackets += ntcp;
3703 txq->stats.obytes += dlen + vlan + ntcp * hlen;
3706 * Build the TSO WQE:
3708 * - Ethernet Segment with hlen bytes inlined
3709 * - Data Segment of pointer type
3711 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3712 loc->wqe_last = wqe;
3713 mlx5_tx_cseg_init(txq, loc, wqe, ds,
3714 MLX5_OPCODE_TSO, olx);
3715 dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
3716 dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen - vlan;
3717 dlen -= hlen - vlan;
3718 mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
3720 * WQE is built, update the loop parameters
3721 * and go to the next packet.
3723 txq->wqe_ci += (ds + 3) / 4;
3724 loc->wqe_free -= (ds + 3) / 4;
3725 if (MLX5_TXOFF_CONFIG(INLINE))
3726 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
3730 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
3731 return MLX5_TXCMP_CODE_EXIT;
3732 loc->mbuf = *pkts++;
3734 rte_prefetch0(*pkts);
3735 if (MLX5_TXOFF_CONFIG(MULTI) &&
3736 unlikely(NB_SEGS(loc->mbuf) > 1))
3737 return MLX5_TXCMP_CODE_MULTI;
3738 if (likely(!(loc->mbuf->ol_flags & PKT_TX_TCP_SEG)))
3739 return MLX5_TXCMP_CODE_SINGLE;
3740 /* Continue with the next TSO packet. */
3746 * Analyze the packet and select the best method to send.
3749 * Pointer to TX queue structure.
3751 * Pointer to burst routine local context.
3753 * Configured Tx offloads mask. It is fully defined at
3754 * compile time and may be used for optimization.
3756 * The predefined flag whether do complete check for
3757 * multi-segment packets and TSO.
3760 * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
3761 * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
3762 * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
3763 * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
3765 static __rte_always_inline enum mlx5_txcmp_code
3766 mlx5_tx_able_to_empw(struct mlx5_txq_data *restrict txq,
3767 struct mlx5_txq_local *restrict loc,
3771 /* Check for multi-segment packet. */
3773 MLX5_TXOFF_CONFIG(MULTI) &&
3774 unlikely(NB_SEGS(loc->mbuf) > 1))
3775 return MLX5_TXCMP_CODE_MULTI;
3776 /* Check for TSO packet. */
3778 MLX5_TXOFF_CONFIG(TSO) &&
3779 unlikely(loc->mbuf->ol_flags & PKT_TX_TCP_SEG))
3780 return MLX5_TXCMP_CODE_TSO;
3781 /* Check if eMPW is enabled at all. */
3782 if (!MLX5_TXOFF_CONFIG(EMPW))
3783 return MLX5_TXCMP_CODE_SINGLE;
3784 /* Check if eMPW can be engaged. */
3785 if (MLX5_TXOFF_CONFIG(VLAN) &&
3786 unlikely(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) &&
3787 (!MLX5_TXOFF_CONFIG(INLINE) ||
3788 unlikely((rte_pktmbuf_data_len(loc->mbuf) +
3789 sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
3791 * eMPW does not support VLAN insertion offload,
3792 * we have to inline the entire packet but
3793 * packet is too long for inlining.
3795 return MLX5_TXCMP_CODE_SINGLE;
3797 return MLX5_TXCMP_CODE_EMPW;
3801 * Check the next packet attributes to match with the eMPW batch ones.
3802 * In addition, for legacy MPW the packet length is checked either.
3805 * Pointer to TX queue structure.
3807 * Pointer to Ethernet Segment of eMPW batch.
3809 * Pointer to burst routine local context.
3811 * Length of previous packet in MPW descriptor.
3813 * Configured Tx offloads mask. It is fully defined at
3814 * compile time and may be used for optimization.
3817 * true - packet match with eMPW batch attributes.
3818 * false - no match, eMPW should be restarted.
3820 static __rte_always_inline bool
3821 mlx5_tx_match_empw(struct mlx5_txq_data *restrict txq __rte_unused,
3822 struct mlx5_wqe_eseg *restrict es,
3823 struct mlx5_txq_local *restrict loc,
3827 uint8_t swp_flags = 0;
3829 /* Compare the checksum flags, if any. */
3830 if (MLX5_TXOFF_CONFIG(CSUM) &&
3831 txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
3833 /* Compare the Software Parser offsets and flags. */
3834 if (MLX5_TXOFF_CONFIG(SWP) &&
3835 (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
3836 es->swp_flags != swp_flags))
3838 /* Fill metadata field if needed. */
3839 if (MLX5_TXOFF_CONFIG(METADATA) &&
3840 es->metadata != (loc->mbuf->ol_flags & PKT_TX_DYNF_METADATA ?
3841 *RTE_FLOW_DYNF_METADATA(loc->mbuf) : 0))
3843 /* Legacy MPW can send packets with the same lengt only. */
3844 if (MLX5_TXOFF_CONFIG(MPW) &&
3845 dlen != rte_pktmbuf_data_len(loc->mbuf))
3847 /* There must be no VLAN packets in eMPW loop. */
3848 if (MLX5_TXOFF_CONFIG(VLAN))
3849 MLX5_ASSERT(!(loc->mbuf->ol_flags & PKT_TX_VLAN_PKT));
3854 * Update send loop variables and WQE for eMPW loop
3855 * without data inlining. Number of Data Segments is
3856 * equal to the number of sent packets.
3859 * Pointer to TX queue structure.
3861 * Pointer to burst routine local context.
3863 * Number of packets/Data Segments/Packets.
3865 * Accumulated statistics, bytes sent
3867 * Configured Tx offloads mask. It is fully defined at
3868 * compile time and may be used for optimization.
3871 * true - packet match with eMPW batch attributes.
3872 * false - no match, eMPW should be restarted.
3874 static __rte_always_inline void
3875 mlx5_tx_sdone_empw(struct mlx5_txq_data *restrict txq,
3876 struct mlx5_txq_local *restrict loc,
3879 unsigned int olx __rte_unused)
3881 MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
3882 #ifdef MLX5_PMD_SOFT_COUNTERS
3883 /* Update sent data bytes counter. */
3884 txq->stats.obytes += slen;
3888 loc->elts_free -= ds;
3889 loc->pkts_sent += ds;
3891 loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
3892 txq->wqe_ci += (ds + 3) / 4;
3893 loc->wqe_free -= (ds + 3) / 4;
3897 * Update send loop variables and WQE for eMPW loop
3898 * with data inlining. Gets the size of pushed descriptors
3899 * and data to the WQE.
3902 * Pointer to TX queue structure.
3904 * Pointer to burst routine local context.
3906 * Total size of descriptor/data in bytes.
3908 * Accumulated statistics, data bytes sent.
3910 * Configured Tx offloads mask. It is fully defined at
3911 * compile time and may be used for optimization.
3914 * true - packet match with eMPW batch attributes.
3915 * false - no match, eMPW should be restarted.
3917 static __rte_always_inline void
3918 mlx5_tx_idone_empw(struct mlx5_txq_data *restrict txq,
3919 struct mlx5_txq_local *restrict loc,
3922 unsigned int olx __rte_unused)
3924 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
3925 MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
3926 #ifdef MLX5_PMD_SOFT_COUNTERS
3927 /* Update sent data bytes counter. */
3928 txq->stats.obytes += slen;
3932 len = len / MLX5_WSEG_SIZE + 2;
3933 loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
3934 txq->wqe_ci += (len + 3) / 4;
3935 loc->wqe_free -= (len + 3) / 4;
3939 * The set of Tx burst functions for single-segment packets
3940 * without TSO and with Multi-Packet Writing feature support.
3941 * Supports all types of Tx offloads, except multi-packets
3944 * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends
3945 * as many packet per WQE as it can. If eMPW is not configured
3946 * or packet can not be sent with eMPW (VLAN insertion) the
3947 * ordinary SEND opcode is used and only one packet placed
3950 * Functions stop sending if it encounters the multi-segment
3951 * packet or packet with TSO requested.
3953 * The routines are responsible for storing processed mbuf
3954 * into elts ring buffer and update elts_head if inlining
3955 * offload is requested. Otherwise the copying mbufs to elts
3956 * can be postponed and completed at the end of burst routine.
3959 * Pointer to TX queue structure.
3961 * Packets to transmit.
3963 * Number of packets in array.
3965 * Pointer to burst routine local context.
3967 * Configured Tx offloads mask. It is fully defined at
3968 * compile time and may be used for optimization.
3971 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
3972 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
3973 * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
3974 * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
3975 * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
3976 * MLX5_TXCMP_CODE_EMPW - used inside functions set.
3978 * Local context variables updated.
3981 * The routine sends packets with MLX5_OPCODE_EMPW
3982 * without inlining, this is dedicated optimized branch.
3983 * No VLAN insertion is supported.
3985 static __rte_always_inline enum mlx5_txcmp_code
3986 mlx5_tx_burst_empw_simple(struct mlx5_txq_data *restrict txq,
3987 struct rte_mbuf **restrict pkts,
3988 unsigned int pkts_n,
3989 struct mlx5_txq_local *restrict loc,
3993 * Subroutine is the part of mlx5_tx_burst_single()
3994 * and sends single-segment packet with eMPW opcode
3995 * without data inlining.
3997 MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
3998 MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
3999 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
4000 MLX5_ASSERT(pkts_n > loc->pkts_sent);
4001 static_assert(MLX5_EMPW_MIN_PACKETS >= 2, "invalid min size");
4002 pkts += loc->pkts_sent + 1;
4003 pkts_n -= loc->pkts_sent;
4005 struct mlx5_wqe_dseg *restrict dseg;
4006 struct mlx5_wqe_eseg *restrict eseg;
4007 enum mlx5_txcmp_code ret;
4008 unsigned int part, loop;
4009 unsigned int slen = 0;
4012 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
4013 part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
4014 MLX5_MPW_MAX_PACKETS :
4015 MLX5_EMPW_MAX_PACKETS);
4016 if (unlikely(loc->elts_free < part)) {
4017 /* We have no enough elts to save all mbufs. */
4018 if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
4019 return MLX5_TXCMP_CODE_EXIT;
4020 /* But we still able to send at least minimal eMPW. */
4021 part = loc->elts_free;
4023 /* Check whether we have enough WQEs */
4024 if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
4025 if (unlikely(loc->wqe_free <
4026 ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
4027 return MLX5_TXCMP_CODE_EXIT;
4028 part = (loc->wqe_free * 4) - 2;
4030 if (likely(part > 1))
4031 rte_prefetch0(*pkts);
4032 loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
4034 * Build eMPW title WQEBB:
4035 * - Control Segment, eMPW opcode
4036 * - Ethernet Segment, no inline
4038 mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
4039 MLX5_OPCODE_ENHANCED_MPSW, olx);
4040 mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
4041 olx & ~MLX5_TXOFF_CONFIG_VLAN);
4042 eseg = &loc->wqe_last->eseg;
4043 dseg = &loc->wqe_last->dseg[0];
4045 /* Store the packet length for legacy MPW. */
4046 if (MLX5_TXOFF_CONFIG(MPW))
4047 eseg->mss = rte_cpu_to_be_16
4048 (rte_pktmbuf_data_len(loc->mbuf));
4050 uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
4051 #ifdef MLX5_PMD_SOFT_COUNTERS
4052 /* Update sent data bytes counter. */
4057 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
4059 if (unlikely(--loop == 0))
4061 loc->mbuf = *pkts++;
4062 if (likely(loop > 1))
4063 rte_prefetch0(*pkts);
4064 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
4066 * Unroll the completion code to avoid
4067 * returning variable value - it results in
4068 * unoptimized sequent checking in caller.
4070 if (ret == MLX5_TXCMP_CODE_MULTI) {
4072 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
4073 if (unlikely(!loc->elts_free ||
4075 return MLX5_TXCMP_CODE_EXIT;
4076 return MLX5_TXCMP_CODE_MULTI;
4078 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
4079 if (ret == MLX5_TXCMP_CODE_TSO) {
4081 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
4082 if (unlikely(!loc->elts_free ||
4084 return MLX5_TXCMP_CODE_EXIT;
4085 return MLX5_TXCMP_CODE_TSO;
4087 if (ret == MLX5_TXCMP_CODE_SINGLE) {
4089 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
4090 if (unlikely(!loc->elts_free ||
4092 return MLX5_TXCMP_CODE_EXIT;
4093 return MLX5_TXCMP_CODE_SINGLE;
4095 if (ret != MLX5_TXCMP_CODE_EMPW) {
4098 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
4099 return MLX5_TXCMP_CODE_ERROR;
4102 * Check whether packet parameters coincide
4103 * within assumed eMPW batch:
4104 * - check sum settings
4106 * - software parser settings
4107 * - packets length (legacy MPW only)
4109 if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
4112 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
4113 if (unlikely(!loc->elts_free ||
4115 return MLX5_TXCMP_CODE_EXIT;
4119 /* Packet attributes match, continue the same eMPW. */
4121 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
4122 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
4124 /* eMPW is built successfully, update loop parameters. */
4126 MLX5_ASSERT(pkts_n >= part);
4127 #ifdef MLX5_PMD_SOFT_COUNTERS
4128 /* Update sent data bytes counter. */
4129 txq->stats.obytes += slen;
4131 loc->elts_free -= part;
4132 loc->pkts_sent += part;
4133 txq->wqe_ci += (2 + part + 3) / 4;
4134 loc->wqe_free -= (2 + part + 3) / 4;
4136 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
4137 return MLX5_TXCMP_CODE_EXIT;
4138 loc->mbuf = *pkts++;
4139 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
4140 if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
4142 /* Continue sending eMPW batches. */
4148 * The routine sends packets with MLX5_OPCODE_EMPW
4149 * with inlining, optionally supports VLAN insertion.
4151 static __rte_always_inline enum mlx5_txcmp_code
4152 mlx5_tx_burst_empw_inline(struct mlx5_txq_data *restrict txq,
4153 struct rte_mbuf **restrict pkts,
4154 unsigned int pkts_n,
4155 struct mlx5_txq_local *restrict loc,
4159 * Subroutine is the part of mlx5_tx_burst_single()
4160 * and sends single-segment packet with eMPW opcode
4161 * with data inlining.
4163 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
4164 MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
4165 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
4166 MLX5_ASSERT(pkts_n > loc->pkts_sent);
4167 static_assert(MLX5_EMPW_MIN_PACKETS >= 2, "invalid min size");
4168 pkts += loc->pkts_sent + 1;
4169 pkts_n -= loc->pkts_sent;
4171 struct mlx5_wqe_dseg *restrict dseg;
4172 struct mlx5_wqe_eseg *restrict eseg;
4173 enum mlx5_txcmp_code ret;
4174 unsigned int room, part, nlim;
4175 unsigned int slen = 0;
4177 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
4179 * Limits the amount of packets in one WQE
4180 * to improve CQE latency generation.
4182 nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
4183 MLX5_MPW_INLINE_MAX_PACKETS :
4184 MLX5_EMPW_MAX_PACKETS);
4185 /* Check whether we have minimal amount WQEs */
4186 if (unlikely(loc->wqe_free <
4187 ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
4188 return MLX5_TXCMP_CODE_EXIT;
4189 if (likely(pkts_n > 1))
4190 rte_prefetch0(*pkts);
4191 loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
4193 * Build eMPW title WQEBB:
4194 * - Control Segment, eMPW opcode, zero DS
4195 * - Ethernet Segment, no inline
4197 mlx5_tx_cseg_init(txq, loc, loc->wqe_last, 0,
4198 MLX5_OPCODE_ENHANCED_MPSW, olx);
4199 mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
4200 olx & ~MLX5_TXOFF_CONFIG_VLAN);
4201 eseg = &loc->wqe_last->eseg;
4202 dseg = &loc->wqe_last->dseg[0];
4203 /* Store the packet length for legacy MPW. */
4204 if (MLX5_TXOFF_CONFIG(MPW))
4205 eseg->mss = rte_cpu_to_be_16
4206 (rte_pktmbuf_data_len(loc->mbuf));
4207 room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
4208 loc->wqe_free) * MLX5_WQE_SIZE -
4209 MLX5_WQE_CSEG_SIZE -
4211 /* Build WQE till we have space, packets and resources. */
4214 uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
4215 uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
4218 MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
4219 MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) == 0);
4220 MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq->wqes_end);
4222 * Some Tx offloads may cause an error if
4223 * packet is not long enough, check against
4224 * assumed minimal length.
4226 if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
4228 if (unlikely(!part))
4229 return MLX5_TXCMP_CODE_ERROR;
4231 * We have some successfully built
4232 * packet Data Segments to send.
4234 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4235 return MLX5_TXCMP_CODE_ERROR;
4237 /* Inline or not inline - that's the Question. */
4238 if (dlen > txq->inlen_empw ||
4239 loc->mbuf->ol_flags & PKT_TX_DYNF_NOINLINE)
4241 /* Inline entire packet, optional VLAN insertion. */
4242 tlen = sizeof(dseg->bcount) + dlen;
4243 if (MLX5_TXOFF_CONFIG(VLAN) &&
4244 loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
4246 * The packet length must be checked in
4247 * mlx5_tx_able_to_empw() and packet
4248 * fits into inline length guaranteed.
4251 sizeof(struct rte_vlan_hdr)) <=
4253 tlen += sizeof(struct rte_vlan_hdr);
4256 dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
4258 #ifdef MLX5_PMD_SOFT_COUNTERS
4259 /* Update sent data bytes counter. */
4260 slen += sizeof(struct rte_vlan_hdr);
4265 dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
4268 tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
4269 MLX5_ASSERT(room >= tlen);
4272 * Packet data are completely inlined,
4273 * free the packet immediately.
4275 rte_pktmbuf_free_seg(loc->mbuf);
4279 * Not inlinable VLAN packets are
4280 * proceeded outside of this routine.
4282 MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
4283 if (MLX5_TXOFF_CONFIG(VLAN))
4284 MLX5_ASSERT(!(loc->mbuf->ol_flags &
4286 mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
4287 /* We have to store mbuf in elts.*/
4288 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
4289 room -= MLX5_WQE_DSEG_SIZE;
4290 /* Ring buffer wraparound is checked at the loop end.*/
4293 #ifdef MLX5_PMD_SOFT_COUNTERS
4294 /* Update sent data bytes counter. */
4300 if (unlikely(!pkts_n || !loc->elts_free)) {
4302 * We have no resources/packets to
4303 * continue build descriptors.
4306 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4307 return MLX5_TXCMP_CODE_EXIT;
4309 loc->mbuf = *pkts++;
4310 if (likely(pkts_n > 1))
4311 rte_prefetch0(*pkts);
4312 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
4314 * Unroll the completion code to avoid
4315 * returning variable value - it results in
4316 * unoptimized sequent checking in caller.
4318 if (ret == MLX5_TXCMP_CODE_MULTI) {
4320 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4321 if (unlikely(!loc->elts_free ||
4323 return MLX5_TXCMP_CODE_EXIT;
4324 return MLX5_TXCMP_CODE_MULTI;
4326 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
4327 if (ret == MLX5_TXCMP_CODE_TSO) {
4329 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4330 if (unlikely(!loc->elts_free ||
4332 return MLX5_TXCMP_CODE_EXIT;
4333 return MLX5_TXCMP_CODE_TSO;
4335 if (ret == MLX5_TXCMP_CODE_SINGLE) {
4337 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4338 if (unlikely(!loc->elts_free ||
4340 return MLX5_TXCMP_CODE_EXIT;
4341 return MLX5_TXCMP_CODE_SINGLE;
4343 if (ret != MLX5_TXCMP_CODE_EMPW) {
4346 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4347 return MLX5_TXCMP_CODE_ERROR;
4349 /* Check if we have minimal room left. */
4351 if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
4354 * Check whether packet parameters coincide
4355 * within assumed eMPW batch:
4356 * - check sum settings
4358 * - software parser settings
4359 * - packets length (legacy MPW only)
4361 if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx))
4363 /* Packet attributes match, continue the same eMPW. */
4364 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
4365 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
4368 * We get here to close an existing eMPW
4369 * session and start the new one.
4371 MLX5_ASSERT(pkts_n);
4373 if (unlikely(!part))
4374 return MLX5_TXCMP_CODE_EXIT;
4375 mlx5_tx_idone_empw(txq, loc, part, slen, olx);
4376 if (unlikely(!loc->elts_free ||
4378 return MLX5_TXCMP_CODE_EXIT;
4379 /* Continue the loop with new eMPW session. */
4385 * The routine sends packets with ordinary MLX5_OPCODE_SEND.
4386 * Data inlining and VLAN insertion are supported.
4388 static __rte_always_inline enum mlx5_txcmp_code
4389 mlx5_tx_burst_single_send(struct mlx5_txq_data *restrict txq,
4390 struct rte_mbuf **restrict pkts,
4391 unsigned int pkts_n,
4392 struct mlx5_txq_local *restrict loc,
4396 * Subroutine is the part of mlx5_tx_burst_single()
4397 * and sends single-segment packet with SEND opcode.
4399 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
4400 MLX5_ASSERT(pkts_n > loc->pkts_sent);
4401 pkts += loc->pkts_sent + 1;
4402 pkts_n -= loc->pkts_sent;
4404 struct mlx5_wqe *restrict wqe;
4405 enum mlx5_txcmp_code ret;
4407 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
4408 if (MLX5_TXOFF_CONFIG(INLINE)) {
4409 unsigned int inlen, vlan = 0;
4411 inlen = rte_pktmbuf_data_len(loc->mbuf);
4412 if (MLX5_TXOFF_CONFIG(VLAN) &&
4413 loc->mbuf->ol_flags & PKT_TX_VLAN_PKT) {
4414 vlan = sizeof(struct rte_vlan_hdr);
4416 static_assert((sizeof(struct rte_vlan_hdr) +
4417 sizeof(struct rte_ether_hdr)) ==
4418 MLX5_ESEG_MIN_INLINE_SIZE,
4419 "invalid min inline data size");
4422 * If inlining is enabled at configuration time
4423 * the limit must be not less than minimal size.
4424 * Otherwise we would do extra check for data
4425 * size to avoid crashes due to length overflow.
4427 MLX5_ASSERT(txq->inlen_send >=
4428 MLX5_ESEG_MIN_INLINE_SIZE);
4429 if (inlen <= txq->inlen_send) {
4430 unsigned int seg_n, wqe_n;
4432 rte_prefetch0(rte_pktmbuf_mtod
4433 (loc->mbuf, uint8_t *));
4434 /* Check against minimal length. */
4435 if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
4436 return MLX5_TXCMP_CODE_ERROR;
4437 if (loc->mbuf->ol_flags &
4438 PKT_TX_DYNF_NOINLINE) {
4440 * The hint flag not to inline packet
4441 * data is set. Check whether we can
4444 if ((!MLX5_TXOFF_CONFIG(EMPW) &&
4446 (MLX5_TXOFF_CONFIG(MPW) &&
4449 * The hardware requires the
4450 * minimal inline data header.
4452 goto single_min_inline;
4454 if (MLX5_TXOFF_CONFIG(VLAN) &&
4455 vlan && !txq->vlan_en) {
4457 * We must insert VLAN tag
4458 * by software means.
4460 goto single_part_inline;
4462 goto single_no_inline;
4465 * Completely inlined packet data WQE:
4466 * - Control Segment, SEND opcode
4467 * - Ethernet Segment, no VLAN insertion
4468 * - Data inlined, VLAN optionally inserted
4469 * - Alignment to MLX5_WSEG_SIZE
4470 * Have to estimate amount of WQEBBs
4472 seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
4473 MLX5_ESEG_MIN_INLINE_SIZE +
4474 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
4475 /* Check if there are enough WQEBBs. */
4476 wqe_n = (seg_n + 3) / 4;
4477 if (wqe_n > loc->wqe_free)
4478 return MLX5_TXCMP_CODE_EXIT;
4479 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
4480 loc->wqe_last = wqe;
4481 mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
4482 MLX5_OPCODE_SEND, olx);
4483 mlx5_tx_eseg_data(txq, loc, wqe,
4484 vlan, inlen, 0, olx);
4485 txq->wqe_ci += wqe_n;
4486 loc->wqe_free -= wqe_n;
4488 * Packet data are completely inlined,
4489 * free the packet immediately.
4491 rte_pktmbuf_free_seg(loc->mbuf);
4492 } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
4493 MLX5_TXOFF_CONFIG(MPW)) &&
4496 * If minimal inlining is requested the eMPW
4497 * feature should be disabled due to data is
4498 * inlined into Ethernet Segment, which can
4499 * not contain inlined data for eMPW due to
4500 * segment shared for all packets.
4502 struct mlx5_wqe_dseg *restrict dseg;
4507 * The inline-mode settings require
4508 * to inline the specified amount of
4509 * data bytes to the Ethernet Segment.
4510 * We should check the free space in
4511 * WQE ring buffer to inline partially.
4514 MLX5_ASSERT(txq->inlen_send >= txq->inlen_mode);
4515 MLX5_ASSERT(inlen > txq->inlen_mode);
4516 MLX5_ASSERT(txq->inlen_mode >=
4517 MLX5_ESEG_MIN_INLINE_SIZE);
4519 * Check whether there are enough free WQEBBs:
4521 * - Ethernet Segment
4522 * - First Segment of inlined Ethernet data
4523 * - ... data continued ...
4524 * - Finishing Data Segment of pointer type
4526 ds = (MLX5_WQE_CSEG_SIZE +
4527 MLX5_WQE_ESEG_SIZE +
4528 MLX5_WQE_DSEG_SIZE +
4530 MLX5_ESEG_MIN_INLINE_SIZE +
4531 MLX5_WQE_DSEG_SIZE +
4532 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
4533 if (loc->wqe_free < ((ds + 3) / 4))
4534 return MLX5_TXCMP_CODE_EXIT;
4536 * Build the ordinary SEND WQE:
4538 * - Ethernet Segment, inline inlen_mode bytes
4539 * - Data Segment of pointer type
4541 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
4542 loc->wqe_last = wqe;
4543 mlx5_tx_cseg_init(txq, loc, wqe, ds,
4544 MLX5_OPCODE_SEND, olx);
4545 dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan,
4548 dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
4549 txq->inlen_mode - vlan;
4550 inlen -= txq->inlen_mode;
4551 mlx5_tx_dseg_ptr(txq, loc, dseg,
4554 * WQE is built, update the loop parameters
4555 * and got to the next packet.
4557 txq->wqe_ci += (ds + 3) / 4;
4558 loc->wqe_free -= (ds + 3) / 4;
4559 /* We have to store mbuf in elts.*/
4560 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
4561 txq->elts[txq->elts_head++ & txq->elts_m] =
4569 * Partially inlined packet data WQE, we have
4570 * some space in title WQEBB, we can fill it
4571 * with some packet data. It takes one WQEBB,
4572 * it is available, no extra space check:
4573 * - Control Segment, SEND opcode
4574 * - Ethernet Segment, no VLAN insertion
4575 * - MLX5_ESEG_MIN_INLINE_SIZE bytes of Data
4576 * - Data Segment, pointer type
4578 * We also get here if VLAN insertion is not
4579 * supported by HW, the inline is enabled.
4582 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
4583 loc->wqe_last = wqe;
4584 mlx5_tx_cseg_init(txq, loc, wqe, 4,
4585 MLX5_OPCODE_SEND, olx);
4586 mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
4587 dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
4588 MLX5_ESEG_MIN_INLINE_SIZE - vlan;
4590 * The length check is performed above, by
4591 * comparing with txq->inlen_send. We should
4592 * not get overflow here.
4594 MLX5_ASSERT(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
4595 dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
4596 mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
4600 /* We have to store mbuf in elts.*/
4601 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
4602 txq->elts[txq->elts_head++ & txq->elts_m] =
4606 #ifdef MLX5_PMD_SOFT_COUNTERS
4607 /* Update sent data bytes counter. */
4608 txq->stats.obytes += vlan +
4609 rte_pktmbuf_data_len(loc->mbuf);
4613 * No inline at all, it means the CPU cycles saving
4614 * is prioritized at configuration, we should not
4615 * copy any packet data to WQE.
4617 * SEND WQE, one WQEBB:
4618 * - Control Segment, SEND opcode
4619 * - Ethernet Segment, optional VLAN, no inline
4620 * - Data Segment, pointer type
4623 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
4624 loc->wqe_last = wqe;
4625 mlx5_tx_cseg_init(txq, loc, wqe, 3,
4626 MLX5_OPCODE_SEND, olx);
4627 mlx5_tx_eseg_none(txq, loc, wqe, olx);
4629 (txq, loc, &wqe->dseg[0],
4630 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
4631 rte_pktmbuf_data_len(loc->mbuf), olx);
4635 * We should not store mbuf pointer in elts
4636 * if no inlining is configured, this is done
4637 * by calling routine in a batch copy.
4639 MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
4641 #ifdef MLX5_PMD_SOFT_COUNTERS
4642 /* Update sent data bytes counter. */
4643 txq->stats.obytes += rte_pktmbuf_data_len(loc->mbuf);
4644 if (MLX5_TXOFF_CONFIG(VLAN) &&
4645 loc->mbuf->ol_flags & PKT_TX_VLAN_PKT)
4646 txq->stats.obytes +=
4647 sizeof(struct rte_vlan_hdr);
4652 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
4653 return MLX5_TXCMP_CODE_EXIT;
4654 loc->mbuf = *pkts++;
4656 rte_prefetch0(*pkts);
4657 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
4658 if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
4664 static __rte_always_inline enum mlx5_txcmp_code
4665 mlx5_tx_burst_single(struct mlx5_txq_data *restrict txq,
4666 struct rte_mbuf **restrict pkts,
4667 unsigned int pkts_n,
4668 struct mlx5_txq_local *restrict loc,
4671 enum mlx5_txcmp_code ret;
4673 ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
4674 if (ret == MLX5_TXCMP_CODE_SINGLE)
4676 MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
4678 /* Optimize for inline/no inline eMPW send. */
4679 ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
4680 mlx5_tx_burst_empw_inline
4681 (txq, pkts, pkts_n, loc, olx) :
4682 mlx5_tx_burst_empw_simple
4683 (txq, pkts, pkts_n, loc, olx);
4684 if (ret != MLX5_TXCMP_CODE_SINGLE)
4686 /* The resources to send one packet should remain. */
4687 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
4689 ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
4690 MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
4691 if (ret != MLX5_TXCMP_CODE_EMPW)
4693 /* The resources to send one packet should remain. */
4694 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
4699 * DPDK Tx callback template. This is configured template
4700 * used to generate routines optimized for specified offload setup.
4701 * One of this generated functions is chosen at SQ configuration
4705 * Generic pointer to TX queue structure.
4707 * Packets to transmit.
4709 * Number of packets in array.
4711 * Configured offloads mask, presents the bits of MLX5_TXOFF_CONFIG_xxx
4712 * values. Should be static to take compile time static configuration
4716 * Number of packets successfully transmitted (<= pkts_n).
4718 static __rte_always_inline uint16_t
4719 mlx5_tx_burst_tmpl(struct mlx5_txq_data *restrict txq,
4720 struct rte_mbuf **restrict pkts,
4724 struct mlx5_txq_local loc;
4725 enum mlx5_txcmp_code ret;
4728 MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
4729 MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
4730 if (unlikely(!pkts_n))
4734 loc.wqe_last = NULL;
4737 loc.pkts_loop = loc.pkts_sent;
4739 * Check if there are some CQEs, if any:
4740 * - process an encountered errors
4741 * - process the completed WQEs
4742 * - free related mbufs
4743 * - doorbell the NIC about processed CQEs
4745 rte_prefetch0(*(pkts + loc.pkts_sent));
4746 mlx5_tx_handle_completion(txq, olx);
4748 * Calculate the number of available resources - elts and WQEs.
4749 * There are two possible different scenarios:
4750 * - no data inlining into WQEs, one WQEBB may contains upto
4751 * four packets, in this case elts become scarce resource
4752 * - data inlining into WQEs, one packet may require multiple
4753 * WQEBBs, the WQEs become the limiting factor.
4755 MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
4756 loc.elts_free = txq->elts_s -
4757 (uint16_t)(txq->elts_head - txq->elts_tail);
4758 MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
4759 loc.wqe_free = txq->wqe_s -
4760 (uint16_t)(txq->wqe_ci - txq->wqe_pi);
4761 if (unlikely(!loc.elts_free || !loc.wqe_free))
4765 * Fetch the packet from array. Usually this is
4766 * the first packet in series of multi/single
4769 loc.mbuf = *(pkts + loc.pkts_sent);
4770 /* Dedicated branch for multi-segment packets. */
4771 if (MLX5_TXOFF_CONFIG(MULTI) &&
4772 unlikely(NB_SEGS(loc.mbuf) > 1)) {
4774 * Multi-segment packet encountered.
4775 * Hardware is able to process it only
4776 * with SEND/TSO opcodes, one packet
4777 * per WQE, do it in dedicated routine.
4780 MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
4781 part = loc.pkts_sent - loc.pkts_copy;
4782 if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
4784 * There are some single-segment mbufs not
4785 * stored in elts. The mbufs must be in the
4786 * same order as WQEs, so we must copy the
4787 * mbufs to elts here, before the coming
4788 * multi-segment packet mbufs is appended.
4790 mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
4792 loc.pkts_copy = loc.pkts_sent;
4794 MLX5_ASSERT(pkts_n > loc.pkts_sent);
4795 ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc, olx);
4796 if (!MLX5_TXOFF_CONFIG(INLINE))
4797 loc.pkts_copy = loc.pkts_sent;
4799 * These returned code checks are supposed
4800 * to be optimized out due to routine inlining.
4802 if (ret == MLX5_TXCMP_CODE_EXIT) {
4804 * The routine returns this code when
4805 * all packets are sent or there is no
4806 * enough resources to complete request.
4810 if (ret == MLX5_TXCMP_CODE_ERROR) {
4812 * The routine returns this code when
4813 * some error in the incoming packets
4816 txq->stats.oerrors++;
4819 if (ret == MLX5_TXCMP_CODE_SINGLE) {
4821 * The single-segment packet was encountered
4822 * in the array, try to send it with the
4823 * best optimized way, possible engaging eMPW.
4825 goto enter_send_single;
4827 if (MLX5_TXOFF_CONFIG(TSO) &&
4828 ret == MLX5_TXCMP_CODE_TSO) {
4830 * The single-segment TSO packet was
4831 * encountered in the array.
4833 goto enter_send_tso;
4835 /* We must not get here. Something is going wrong. */
4837 txq->stats.oerrors++;
4840 /* Dedicated branch for single-segment TSO packets. */
4841 if (MLX5_TXOFF_CONFIG(TSO) &&
4842 unlikely(loc.mbuf->ol_flags & PKT_TX_TCP_SEG)) {
4844 * TSO might require special way for inlining
4845 * (dedicated parameters) and is sent with
4846 * MLX5_OPCODE_TSO opcode only, provide this
4847 * in dedicated branch.
4850 MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
4851 MLX5_ASSERT(pkts_n > loc.pkts_sent);
4852 ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
4854 * These returned code checks are supposed
4855 * to be optimized out due to routine inlining.
4857 if (ret == MLX5_TXCMP_CODE_EXIT)
4859 if (ret == MLX5_TXCMP_CODE_ERROR) {
4860 txq->stats.oerrors++;
4863 if (ret == MLX5_TXCMP_CODE_SINGLE)
4864 goto enter_send_single;
4865 if (MLX5_TXOFF_CONFIG(MULTI) &&
4866 ret == MLX5_TXCMP_CODE_MULTI) {
4868 * The multi-segment packet was
4869 * encountered in the array.
4871 goto enter_send_multi;
4873 /* We must not get here. Something is going wrong. */
4875 txq->stats.oerrors++;
4879 * The dedicated branch for the single-segment packets
4880 * without TSO. Often these ones can be sent using
4881 * MLX5_OPCODE_EMPW with multiple packets in one WQE.
4882 * The routine builds the WQEs till it encounters
4883 * the TSO or multi-segment packet (in case if these
4884 * offloads are requested at SQ configuration time).
4887 MLX5_ASSERT(pkts_n > loc.pkts_sent);
4888 ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
4890 * These returned code checks are supposed
4891 * to be optimized out due to routine inlining.
4893 if (ret == MLX5_TXCMP_CODE_EXIT)
4895 if (ret == MLX5_TXCMP_CODE_ERROR) {
4896 txq->stats.oerrors++;
4899 if (MLX5_TXOFF_CONFIG(MULTI) &&
4900 ret == MLX5_TXCMP_CODE_MULTI) {
4902 * The multi-segment packet was
4903 * encountered in the array.
4905 goto enter_send_multi;
4907 if (MLX5_TXOFF_CONFIG(TSO) &&
4908 ret == MLX5_TXCMP_CODE_TSO) {
4910 * The single-segment TSO packet was
4911 * encountered in the array.
4913 goto enter_send_tso;
4915 /* We must not get here. Something is going wrong. */
4917 txq->stats.oerrors++;
4921 * Main Tx loop is completed, do the rest:
4922 * - set completion request if thresholds are reached
4923 * - doorbell the hardware
4924 * - copy the rest of mbufs to elts (if any)
4926 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
4927 loc.pkts_sent >= loc.pkts_copy);
4928 /* Take a shortcut if nothing is sent. */
4929 if (unlikely(loc.pkts_sent == loc.pkts_loop))
4931 /* Request CQE generation if limits are reached. */
4932 mlx5_tx_request_completion(txq, &loc, olx);
4934 * Ring QP doorbell immediately after WQE building completion
4935 * to improve latencies. The pure software related data treatment
4936 * can be completed after doorbell. Tx CQEs for this SQ are
4937 * processed in this thread only by the polling.
4939 * The rdma core library can map doorbell register in two ways,
4940 * depending on the environment variable "MLX5_SHUT_UP_BF":
4942 * - as regular cached memory, the variable is either missing or
4943 * set to zero. This type of mapping may cause the significant
4944 * doorbell register writing latency and requires explicit
4945 * memory write barrier to mitigate this issue and prevent
4948 * - as non-cached memory, the variable is present and set to
4949 * not "0" value. This type of mapping may cause performance
4950 * impact under heavy loading conditions but the explicit write
4951 * memory barrier is not required and it may improve core
4954 * - the legacy behaviour (prior 19.08 release) was to use some
4955 * heuristics to decide whether write memory barrier should
4956 * be performed. This behavior is supported with specifying
4957 * tx_db_nc=2, write barrier is skipped if application
4958 * provides the full recommended burst of packets, it
4959 * supposes the next packets are coming and the write barrier
4960 * will be issued on the next burst (after descriptor writing,
4963 mlx5_tx_dbrec_cond_wmb(txq, loc.wqe_last, !txq->db_nc &&
4964 (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
4965 /* Not all of the mbufs may be stored into elts yet. */
4966 part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
4967 if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
4969 * There are some single-segment mbufs not stored in elts.
4970 * It can be only if the last packet was single-segment.
4971 * The copying is gathered into one place due to it is
4972 * a good opportunity to optimize that with SIMD.
4973 * Unfortunately if inlining is enabled the gaps in
4974 * pointer array may happen due to early freeing of the
4977 mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
4978 loc.pkts_copy = loc.pkts_sent;
4980 MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
4981 MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
4982 if (pkts_n > loc.pkts_sent) {
4984 * If burst size is large there might be no enough CQE
4985 * fetched from completion queue and no enough resources
4986 * freed to send all the packets.
4991 #ifdef MLX5_PMD_SOFT_COUNTERS
4992 /* Increment sent packets counter. */
4993 txq->stats.opackets += loc.pkts_sent;
4995 return loc.pkts_sent;
4998 /* Generate routines with Enhanced Multi-Packet Write support. */
4999 MLX5_TXOFF_DECL(full_empw,
5000 MLX5_TXOFF_CONFIG_FULL | MLX5_TXOFF_CONFIG_EMPW)
5002 MLX5_TXOFF_DECL(none_empw,
5003 MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW)
5005 MLX5_TXOFF_DECL(md_empw,
5006 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5008 MLX5_TXOFF_DECL(mt_empw,
5009 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5010 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5012 MLX5_TXOFF_DECL(mtsc_empw,
5013 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5014 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5015 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5017 MLX5_TXOFF_DECL(mti_empw,
5018 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5019 MLX5_TXOFF_CONFIG_INLINE |
5020 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5022 MLX5_TXOFF_DECL(mtv_empw,
5023 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5024 MLX5_TXOFF_CONFIG_VLAN |
5025 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5027 MLX5_TXOFF_DECL(mtiv_empw,
5028 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5029 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5030 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5032 MLX5_TXOFF_DECL(sc_empw,
5033 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5034 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5036 MLX5_TXOFF_DECL(sci_empw,
5037 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5038 MLX5_TXOFF_CONFIG_INLINE |
5039 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5041 MLX5_TXOFF_DECL(scv_empw,
5042 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5043 MLX5_TXOFF_CONFIG_VLAN |
5044 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5046 MLX5_TXOFF_DECL(sciv_empw,
5047 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5048 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5049 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5051 MLX5_TXOFF_DECL(i_empw,
5052 MLX5_TXOFF_CONFIG_INLINE |
5053 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5055 MLX5_TXOFF_DECL(v_empw,
5056 MLX5_TXOFF_CONFIG_VLAN |
5057 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5059 MLX5_TXOFF_DECL(iv_empw,
5060 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5061 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5063 /* Generate routines without Enhanced Multi-Packet Write support. */
5064 MLX5_TXOFF_DECL(full,
5065 MLX5_TXOFF_CONFIG_FULL)
5067 MLX5_TXOFF_DECL(none,
5068 MLX5_TXOFF_CONFIG_NONE)
5071 MLX5_TXOFF_CONFIG_METADATA)
5074 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5075 MLX5_TXOFF_CONFIG_METADATA)
5077 MLX5_TXOFF_DECL(mtsc,
5078 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5079 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5080 MLX5_TXOFF_CONFIG_METADATA)
5082 MLX5_TXOFF_DECL(mti,
5083 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5084 MLX5_TXOFF_CONFIG_INLINE |
5085 MLX5_TXOFF_CONFIG_METADATA)
5088 MLX5_TXOFF_DECL(mtv,
5089 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5090 MLX5_TXOFF_CONFIG_VLAN |
5091 MLX5_TXOFF_CONFIG_METADATA)
5094 MLX5_TXOFF_DECL(mtiv,
5095 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5096 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5097 MLX5_TXOFF_CONFIG_METADATA)
5100 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5101 MLX5_TXOFF_CONFIG_METADATA)
5103 MLX5_TXOFF_DECL(sci,
5104 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5105 MLX5_TXOFF_CONFIG_INLINE |
5106 MLX5_TXOFF_CONFIG_METADATA)
5109 MLX5_TXOFF_DECL(scv,
5110 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5111 MLX5_TXOFF_CONFIG_VLAN |
5112 MLX5_TXOFF_CONFIG_METADATA)
5115 MLX5_TXOFF_DECL(sciv,
5116 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5117 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5118 MLX5_TXOFF_CONFIG_METADATA)
5121 MLX5_TXOFF_CONFIG_INLINE |
5122 MLX5_TXOFF_CONFIG_METADATA)
5125 MLX5_TXOFF_CONFIG_VLAN |
5126 MLX5_TXOFF_CONFIG_METADATA)
5129 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5130 MLX5_TXOFF_CONFIG_METADATA)
5133 * Generate routines with Legacy Multi-Packet Write support.
5134 * This mode is supported by ConnectX-4LX only and imposes
5135 * offload limitations, not supported:
5136 * - ACL/Flows (metadata are becoming meaningless)
5137 * - WQE Inline headers
5138 * - SRIOV (E-Switch offloads)
5140 * - tunnel encapsulation/decapsulation
5143 MLX5_TXOFF_DECL(none_mpw,
5144 MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW |
5145 MLX5_TXOFF_CONFIG_MPW)
5147 MLX5_TXOFF_DECL(mci_mpw,
5148 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
5149 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
5150 MLX5_TXOFF_CONFIG_MPW)
5152 MLX5_TXOFF_DECL(mc_mpw,
5153 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
5154 MLX5_TXOFF_CONFIG_EMPW | MLX5_TXOFF_CONFIG_MPW)
5156 MLX5_TXOFF_DECL(i_mpw,
5157 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
5158 MLX5_TXOFF_CONFIG_MPW)
5161 * Array of declared and compiled Tx burst function and corresponding
5162 * supported offloads set. The array is used to select the Tx burst
5163 * function for specified offloads set at Tx queue configuration time.
5166 eth_tx_burst_t func;
5169 MLX5_TXOFF_INFO(full_empw,
5170 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5171 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5172 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5173 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5175 MLX5_TXOFF_INFO(none_empw,
5176 MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW)
5178 MLX5_TXOFF_INFO(md_empw,
5179 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5181 MLX5_TXOFF_INFO(mt_empw,
5182 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5183 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5185 MLX5_TXOFF_INFO(mtsc_empw,
5186 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5187 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5188 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5190 MLX5_TXOFF_INFO(mti_empw,
5191 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5192 MLX5_TXOFF_CONFIG_INLINE |
5193 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5195 MLX5_TXOFF_INFO(mtv_empw,
5196 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5197 MLX5_TXOFF_CONFIG_VLAN |
5198 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5200 MLX5_TXOFF_INFO(mtiv_empw,
5201 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5202 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5203 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5205 MLX5_TXOFF_INFO(sc_empw,
5206 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5207 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5209 MLX5_TXOFF_INFO(sci_empw,
5210 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5211 MLX5_TXOFF_CONFIG_INLINE |
5212 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5214 MLX5_TXOFF_INFO(scv_empw,
5215 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5216 MLX5_TXOFF_CONFIG_VLAN |
5217 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5219 MLX5_TXOFF_INFO(sciv_empw,
5220 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5221 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5222 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5224 MLX5_TXOFF_INFO(i_empw,
5225 MLX5_TXOFF_CONFIG_INLINE |
5226 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5228 MLX5_TXOFF_INFO(v_empw,
5229 MLX5_TXOFF_CONFIG_VLAN |
5230 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5232 MLX5_TXOFF_INFO(iv_empw,
5233 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5234 MLX5_TXOFF_CONFIG_METADATA | MLX5_TXOFF_CONFIG_EMPW)
5236 MLX5_TXOFF_INFO(full,
5237 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5238 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5239 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5240 MLX5_TXOFF_CONFIG_METADATA)
5242 MLX5_TXOFF_INFO(none,
5243 MLX5_TXOFF_CONFIG_NONE)
5246 MLX5_TXOFF_CONFIG_METADATA)
5249 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5250 MLX5_TXOFF_CONFIG_METADATA)
5252 MLX5_TXOFF_INFO(mtsc,
5253 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5254 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5255 MLX5_TXOFF_CONFIG_METADATA)
5257 MLX5_TXOFF_INFO(mti,
5258 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5259 MLX5_TXOFF_CONFIG_INLINE |
5260 MLX5_TXOFF_CONFIG_METADATA)
5262 MLX5_TXOFF_INFO(mtv,
5263 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5264 MLX5_TXOFF_CONFIG_VLAN |
5265 MLX5_TXOFF_CONFIG_METADATA)
5267 MLX5_TXOFF_INFO(mtiv,
5268 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_TSO |
5269 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5270 MLX5_TXOFF_CONFIG_METADATA)
5273 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5274 MLX5_TXOFF_CONFIG_METADATA)
5276 MLX5_TXOFF_INFO(sci,
5277 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5278 MLX5_TXOFF_CONFIG_INLINE |
5279 MLX5_TXOFF_CONFIG_METADATA)
5281 MLX5_TXOFF_INFO(scv,
5282 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5283 MLX5_TXOFF_CONFIG_VLAN |
5284 MLX5_TXOFF_CONFIG_METADATA)
5286 MLX5_TXOFF_INFO(sciv,
5287 MLX5_TXOFF_CONFIG_SWP | MLX5_TXOFF_CONFIG_CSUM |
5288 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5289 MLX5_TXOFF_CONFIG_METADATA)
5292 MLX5_TXOFF_CONFIG_INLINE |
5293 MLX5_TXOFF_CONFIG_METADATA)
5296 MLX5_TXOFF_CONFIG_VLAN |
5297 MLX5_TXOFF_CONFIG_METADATA)
5300 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_VLAN |
5301 MLX5_TXOFF_CONFIG_METADATA)
5303 MLX5_TXOFF_INFO(none_mpw,
5304 MLX5_TXOFF_CONFIG_NONE | MLX5_TXOFF_CONFIG_EMPW |
5305 MLX5_TXOFF_CONFIG_MPW)
5307 MLX5_TXOFF_INFO(mci_mpw,
5308 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
5309 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
5310 MLX5_TXOFF_CONFIG_MPW)
5312 MLX5_TXOFF_INFO(mc_mpw,
5313 MLX5_TXOFF_CONFIG_MULTI | MLX5_TXOFF_CONFIG_CSUM |
5314 MLX5_TXOFF_CONFIG_EMPW | MLX5_TXOFF_CONFIG_MPW)
5316 MLX5_TXOFF_INFO(i_mpw,
5317 MLX5_TXOFF_CONFIG_INLINE | MLX5_TXOFF_CONFIG_EMPW |
5318 MLX5_TXOFF_CONFIG_MPW)
5322 * Configure the Tx function to use. The routine checks configured
5323 * Tx offloads for the device and selects appropriate Tx burst
5324 * routine. There are multiple Tx burst routines compiled from
5325 * the same template in the most optimal way for the dedicated
5329 * Pointer to private data structure.
5332 * Pointer to selected Tx burst function.
5335 mlx5_select_tx_function(struct rte_eth_dev *dev)
5337 struct mlx5_priv *priv = dev->data->dev_private;
5338 struct mlx5_dev_config *config = &priv->config;
5339 uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads;
5340 unsigned int diff = 0, olx = 0, i, m;
5342 static_assert(MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE <=
5343 MLX5_DSEG_MAX, "invalid WQE max size");
5344 static_assert(MLX5_WQE_CSEG_SIZE == MLX5_WSEG_SIZE,
5345 "invalid WQE Control Segment size");
5346 static_assert(MLX5_WQE_ESEG_SIZE == MLX5_WSEG_SIZE,
5347 "invalid WQE Ethernet Segment size");
5348 static_assert(MLX5_WQE_DSEG_SIZE == MLX5_WSEG_SIZE,
5349 "invalid WQE Data Segment size");
5350 static_assert(MLX5_WQE_SIZE == 4 * MLX5_WSEG_SIZE,
5351 "invalid WQE size");
5353 if (tx_offloads & DEV_TX_OFFLOAD_MULTI_SEGS) {
5354 /* We should support Multi-Segment Packets. */
5355 olx |= MLX5_TXOFF_CONFIG_MULTI;
5357 if (tx_offloads & (DEV_TX_OFFLOAD_TCP_TSO |
5358 DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
5359 DEV_TX_OFFLOAD_GRE_TNL_TSO |
5360 DEV_TX_OFFLOAD_IP_TNL_TSO |
5361 DEV_TX_OFFLOAD_UDP_TNL_TSO)) {
5362 /* We should support TCP Send Offload. */
5363 olx |= MLX5_TXOFF_CONFIG_TSO;
5365 if (tx_offloads & (DEV_TX_OFFLOAD_IP_TNL_TSO |
5366 DEV_TX_OFFLOAD_UDP_TNL_TSO |
5367 DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM)) {
5368 /* We should support Software Parser for Tunnels. */
5369 olx |= MLX5_TXOFF_CONFIG_SWP;
5371 if (tx_offloads & (DEV_TX_OFFLOAD_IPV4_CKSUM |
5372 DEV_TX_OFFLOAD_UDP_CKSUM |
5373 DEV_TX_OFFLOAD_TCP_CKSUM |
5374 DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM)) {
5375 /* We should support IP/TCP/UDP Checksums. */
5376 olx |= MLX5_TXOFF_CONFIG_CSUM;
5378 if (tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT) {
5379 /* We should support VLAN insertion. */
5380 olx |= MLX5_TXOFF_CONFIG_VLAN;
5382 if (priv->txqs_n && (*priv->txqs)[0]) {
5383 struct mlx5_txq_data *txd = (*priv->txqs)[0];
5385 if (txd->inlen_send) {
5387 * Check the data inline requirements. Data inline
5388 * is enabled on per device basis, we can check
5389 * the first Tx queue only.
5391 * If device does not support VLAN insertion in WQE
5392 * and some queues are requested to perform VLAN
5393 * insertion offload than inline must be enabled.
5395 olx |= MLX5_TXOFF_CONFIG_INLINE;
5398 if (config->mps == MLX5_MPW_ENHANCED &&
5399 config->txq_inline_min <= 0) {
5401 * The NIC supports Enhanced Multi-Packet Write
5402 * and does not require minimal inline data.
5404 olx |= MLX5_TXOFF_CONFIG_EMPW;
5406 if (rte_flow_dynf_metadata_avail()) {
5407 /* We should support Flow metadata. */
5408 olx |= MLX5_TXOFF_CONFIG_METADATA;
5410 if (config->mps == MLX5_MPW) {
5412 * The NIC supports Legacy Multi-Packet Write.
5413 * The MLX5_TXOFF_CONFIG_MPW controls the
5414 * descriptor building method in combination
5415 * with MLX5_TXOFF_CONFIG_EMPW.
5417 if (!(olx & (MLX5_TXOFF_CONFIG_TSO |
5418 MLX5_TXOFF_CONFIG_SWP |
5419 MLX5_TXOFF_CONFIG_VLAN |
5420 MLX5_TXOFF_CONFIG_METADATA)))
5421 olx |= MLX5_TXOFF_CONFIG_EMPW |
5422 MLX5_TXOFF_CONFIG_MPW;
5425 * Scan the routines table to find the minimal
5426 * satisfying routine with requested offloads.
5428 m = RTE_DIM(txoff_func);
5429 for (i = 0; i < RTE_DIM(txoff_func); i++) {
5432 tmp = txoff_func[i].olx;
5434 /* Meets requested offloads exactly.*/
5438 if ((tmp & olx) != olx) {
5439 /* Does not meet requested offloads at all. */
5442 if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_EMPW)
5443 /* Do not enable eMPW if not configured. */
5445 if ((olx ^ tmp) & MLX5_TXOFF_CONFIG_INLINE)
5446 /* Do not enable inlining if not configured. */
5449 * Some routine meets the requirements.
5450 * Check whether it has minimal amount
5451 * of not requested offloads.
5453 tmp = __builtin_popcountl(tmp & ~olx);
5454 if (m >= RTE_DIM(txoff_func) || tmp < diff) {
5455 /* First or better match, save and continue. */
5461 tmp = txoff_func[i].olx ^ txoff_func[m].olx;
5462 if (__builtin_ffsl(txoff_func[i].olx & ~tmp) <
5463 __builtin_ffsl(txoff_func[m].olx & ~tmp)) {
5464 /* Lighter not requested offload. */
5469 if (m >= RTE_DIM(txoff_func)) {
5470 DRV_LOG(DEBUG, "port %u has no selected Tx function"
5471 " for requested offloads %04X",
5472 dev->data->port_id, olx);
5475 DRV_LOG(DEBUG, "port %u has selected Tx function"
5476 " supporting offloads %04X/%04X",
5477 dev->data->port_id, olx, txoff_func[m].olx);
5478 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_MULTI)
5479 DRV_LOG(DEBUG, "\tMULTI (multi segment)");
5480 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_TSO)
5481 DRV_LOG(DEBUG, "\tTSO (TCP send offload)");
5482 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_SWP)
5483 DRV_LOG(DEBUG, "\tSWP (software parser)");
5484 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_CSUM)
5485 DRV_LOG(DEBUG, "\tCSUM (checksum offload)");
5486 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_INLINE)
5487 DRV_LOG(DEBUG, "\tINLIN (inline data)");
5488 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_VLAN)
5489 DRV_LOG(DEBUG, "\tVLANI (VLAN insertion)");
5490 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_METADATA)
5491 DRV_LOG(DEBUG, "\tMETAD (tx Flow metadata)");
5492 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_EMPW) {
5493 if (txoff_func[m].olx & MLX5_TXOFF_CONFIG_MPW)
5494 DRV_LOG(DEBUG, "\tMPW (Legacy MPW)");
5496 DRV_LOG(DEBUG, "\tEMPW (Enhanced MPW)");
5498 return txoff_func[m].func;
5502 * DPDK callback to get the TX queue information
5505 * Pointer to the device structure.
5507 * @param tx_queue_id
5508 * Tx queue identificator.
5511 * Pointer to the TX queue information structure.
5518 mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
5519 struct rte_eth_txq_info *qinfo)
5521 struct mlx5_priv *priv = dev->data->dev_private;
5522 struct mlx5_txq_data *txq = (*priv->txqs)[tx_queue_id];
5523 struct mlx5_txq_ctrl *txq_ctrl =
5524 container_of(txq, struct mlx5_txq_ctrl, txq);
5528 qinfo->nb_desc = txq->elts_s;
5529 qinfo->conf.tx_thresh.pthresh = 0;
5530 qinfo->conf.tx_thresh.hthresh = 0;
5531 qinfo->conf.tx_thresh.wthresh = 0;
5532 qinfo->conf.tx_rs_thresh = 0;
5533 qinfo->conf.tx_free_thresh = 0;
5534 qinfo->conf.tx_deferred_start = txq_ctrl ? 0 : 1;
5535 qinfo->conf.offloads = dev->data->dev_conf.txmode.offloads;
5539 * DPDK callback to get the TX packet burst mode information
5542 * Pointer to the device structure.
5544 * @param tx_queue_id
5545 * Tx queue identificatior.
5548 * Pointer to the burts mode information.
5551 * 0 as success, -EINVAL as failure.
5555 mlx5_tx_burst_mode_get(struct rte_eth_dev *dev,
5556 uint16_t tx_queue_id __rte_unused,
5557 struct rte_eth_burst_mode *mode)
5559 eth_tx_burst_t pkt_burst = dev->tx_pkt_burst;
5560 unsigned int i, olx;
5562 for (i = 0; i < RTE_DIM(txoff_func); i++) {
5563 if (pkt_burst == txoff_func[i].func) {
5564 olx = txoff_func[i].olx;
5565 snprintf(mode->info, sizeof(mode->info),
5567 (olx & MLX5_TXOFF_CONFIG_EMPW) ?
5568 ((olx & MLX5_TXOFF_CONFIG_MPW) ?
5569 "Legacy MPW" : "Enhanced MPW") : "No MPW",
5570 (olx & MLX5_TXOFF_CONFIG_MULTI) ?
5572 (olx & MLX5_TXOFF_CONFIG_TSO) ?
5574 (olx & MLX5_TXOFF_CONFIG_SWP) ?
5576 (olx & MLX5_TXOFF_CONFIG_CSUM) ?
5578 (olx & MLX5_TXOFF_CONFIG_INLINE) ?
5580 (olx & MLX5_TXOFF_CONFIG_VLAN) ?
5582 (olx & MLX5_TXOFF_CONFIG_METADATA) ?
5583 " + METADATA" : "");