1 /* SPDX-License-Identifier: BSD-3-Clause
2 * Copyright 2021 6WIND S.A.
3 * Copyright 2021 Mellanox Technologies, Ltd
6 #ifndef RTE_PMD_MLX5_TX_H_
7 #define RTE_PMD_MLX5_TX_H_
10 #include <sys/queue.h>
13 #include <rte_mempool.h>
14 #include <rte_common.h>
15 #include <rte_spinlock.h>
17 #include <mlx5_common.h>
18 #include <mlx5_common_mr.h>
21 #include "mlx5_autoconf.h"
23 /* TX burst subroutines return codes. */
24 enum mlx5_txcmp_code {
25 MLX5_TXCMP_CODE_EXIT = 0,
26 MLX5_TXCMP_CODE_ERROR,
27 MLX5_TXCMP_CODE_SINGLE,
28 MLX5_TXCMP_CODE_MULTI,
34 * These defines are used to configure Tx burst routine option set supported
35 * at compile time. The not specified options are optimized out due to if
36 * conditions can be explicitly calculated at compile time.
37 * The offloads with bigger runtime check (require more CPU cycles toskip)
38 * overhead should have the bigger index - this is needed to select the better
39 * matching routine function if no exact match and some offloads are not
42 #define MLX5_TXOFF_CONFIG_MULTI (1u << 0) /* Multi-segment packets.*/
43 #define MLX5_TXOFF_CONFIG_TSO (1u << 1) /* TCP send offload supported.*/
44 #define MLX5_TXOFF_CONFIG_SWP (1u << 2) /* Tunnels/SW Parser offloads.*/
45 #define MLX5_TXOFF_CONFIG_CSUM (1u << 3) /* Check Sums offloaded. */
46 #define MLX5_TXOFF_CONFIG_INLINE (1u << 4) /* Data inlining supported. */
47 #define MLX5_TXOFF_CONFIG_VLAN (1u << 5) /* VLAN insertion supported.*/
48 #define MLX5_TXOFF_CONFIG_METADATA (1u << 6) /* Flow metadata. */
49 #define MLX5_TXOFF_CONFIG_EMPW (1u << 8) /* Enhanced MPW supported.*/
50 #define MLX5_TXOFF_CONFIG_MPW (1u << 9) /* Legacy MPW supported.*/
51 #define MLX5_TXOFF_CONFIG_TXPP (1u << 10) /* Scheduling on timestamp.*/
53 /* The most common offloads groups. */
54 #define MLX5_TXOFF_CONFIG_NONE 0
55 #define MLX5_TXOFF_CONFIG_FULL (MLX5_TXOFF_CONFIG_MULTI | \
56 MLX5_TXOFF_CONFIG_TSO | \
57 MLX5_TXOFF_CONFIG_SWP | \
58 MLX5_TXOFF_CONFIG_CSUM | \
59 MLX5_TXOFF_CONFIG_INLINE | \
60 MLX5_TXOFF_CONFIG_VLAN | \
61 MLX5_TXOFF_CONFIG_METADATA)
63 #define MLX5_TXOFF_CONFIG(mask) (olx & MLX5_TXOFF_CONFIG_##mask)
65 #define MLX5_TXOFF_PRE_DECL(func) \
66 uint16_t mlx5_tx_burst_##func(void *txq, \
67 struct rte_mbuf **pkts, \
70 #define MLX5_TXOFF_DECL(func, olx) \
71 uint16_t mlx5_tx_burst_##func(void *txq, \
72 struct rte_mbuf **pkts, \
75 return mlx5_tx_burst_tmpl((struct mlx5_txq_data *)txq, \
76 pkts, pkts_n, (olx)); \
79 /* Mbuf dynamic flag offset for inline. */
80 extern uint64_t rte_net_mlx5_dynf_inline_mask;
81 #define RTE_MBUF_F_TX_DYNF_NOINLINE rte_net_mlx5_dynf_inline_mask
83 extern uint32_t mlx5_ptype_table[] __rte_cache_aligned;
84 extern uint8_t mlx5_cksum_table[1 << 10] __rte_cache_aligned;
85 extern uint8_t mlx5_swp_types_table[1 << 10] __rte_cache_aligned;
87 struct mlx5_txq_stats {
88 #ifdef MLX5_PMD_SOFT_COUNTERS
89 uint64_t opackets; /**< Total of successfully sent packets. */
90 uint64_t obytes; /**< Total of successfully sent bytes. */
92 uint64_t oerrors; /**< Total number of failed transmitted packets. */
95 /* TX queue send local data. */
97 struct mlx5_txq_local {
98 struct mlx5_wqe *wqe_last; /* last sent WQE pointer. */
99 struct rte_mbuf *mbuf; /* first mbuf to process. */
100 uint16_t pkts_copy; /* packets copied to elts. */
101 uint16_t pkts_sent; /* packets sent. */
102 uint16_t pkts_loop; /* packets sent on loop entry. */
103 uint16_t elts_free; /* available elts remain. */
104 uint16_t wqe_free; /* available wqe remain. */
105 uint16_t mbuf_off; /* data offset in current mbuf. */
106 uint16_t mbuf_nseg; /* number of remaining mbuf. */
107 uint16_t mbuf_free; /* number of inline mbufs to free. */
110 /* TX queue descriptor. */
112 struct mlx5_txq_data {
113 uint16_t elts_head; /* Current counter in (*elts)[]. */
114 uint16_t elts_tail; /* Counter of first element awaiting completion. */
115 uint16_t elts_comp; /* elts index since last completion request. */
116 uint16_t elts_s; /* Number of mbuf elements. */
117 uint16_t elts_m; /* Mask for mbuf elements indices. */
118 /* Fields related to elts mbuf storage. */
119 uint16_t wqe_ci; /* Consumer index for work queue. */
120 uint16_t wqe_pi; /* Producer index for work queue. */
121 uint16_t wqe_s; /* Number of WQ elements. */
122 uint16_t wqe_m; /* Mask Number for WQ elements. */
123 uint16_t wqe_comp; /* WQE index since last completion request. */
124 uint16_t wqe_thres; /* WQE threshold to request completion in CQ. */
125 /* WQ related fields. */
126 uint16_t cq_ci; /* Consumer index for completion queue. */
127 uint16_t cq_pi; /* Production index for completion queue. */
128 uint16_t cqe_s; /* Number of CQ elements. */
129 uint16_t cqe_m; /* Mask for CQ indices. */
130 /* CQ related fields. */
131 uint16_t elts_n:4; /* elts[] length (in log2). */
132 uint16_t cqe_n:4; /* Number of CQ elements (in log2). */
133 uint16_t wqe_n:4; /* Number of WQ elements (in log2). */
134 uint16_t tso_en:1; /* When set hardware TSO is enabled. */
135 uint16_t tunnel_en:1;
136 /* When set TX offload for tunneled packets are supported. */
137 uint16_t swp_en:1; /* Whether SW parser is enabled. */
138 uint16_t vlan_en:1; /* VLAN insertion in WQE is supported. */
139 uint16_t db_nc:1; /* Doorbell mapped to non-cached region. */
140 uint16_t db_heu:1; /* Doorbell heuristic write barrier. */
141 uint16_t rt_timestamp:1; /* Realtime timestamp format. */
142 uint16_t wait_on_time:1; /* WQE with timestamp is supported. */
143 uint16_t fast_free:1; /* mbuf fast free on Tx is enabled. */
144 uint16_t inlen_send; /* Ordinary send data inline size. */
145 uint16_t inlen_empw; /* eMPW max packet size to inline. */
146 uint16_t inlen_mode; /* Minimal data length to inline. */
147 uint32_t qp_num_8s; /* QP number shifted by 8. */
148 uint64_t offloads; /* Offloads for Tx Queue. */
149 struct mlx5_mr_ctrl mr_ctrl; /* MR control descriptor. */
150 struct mlx5_wqe *wqes; /* Work queue. */
151 struct mlx5_wqe *wqes_end; /* Work queue array limit. */
152 #ifdef RTE_LIBRTE_MLX5_DEBUG
153 uint32_t *fcqs; /* Free completion queue (debug extended). */
155 uint16_t *fcqs; /* Free completion queue. */
157 volatile struct mlx5_cqe *cqes; /* Completion queue. */
158 volatile uint32_t *qp_db; /* Work queue doorbell. */
159 volatile uint32_t *cq_db; /* Completion queue doorbell. */
160 uint16_t port_id; /* Port ID of device. */
161 uint16_t idx; /* Queue index. */
162 uint64_t rt_timemask; /* Scheduling timestamp mask. */
163 uint64_t ts_mask; /* Timestamp flag dynamic mask. */
164 int32_t ts_offset; /* Timestamp field dynamic offset. */
165 struct mlx5_dev_ctx_shared *sh; /* Shared context. */
166 struct mlx5_txq_stats stats; /* TX queue counters. */
167 struct mlx5_uar_data uar_data;
168 struct rte_mbuf *elts[0];
169 /* Storage for queued packets, must be the last field. */
170 } __rte_cache_aligned;
172 /* TX queue control descriptor. */
173 struct mlx5_txq_ctrl {
174 LIST_ENTRY(mlx5_txq_ctrl) next; /* Pointer to the next element. */
175 uint32_t refcnt; /* Reference counter. */
176 unsigned int socket; /* CPU socket ID for allocations. */
177 bool is_hairpin; /* Whether TxQ type is Hairpin. */
178 unsigned int max_inline_data; /* Max inline data. */
179 unsigned int max_tso_header; /* Max TSO header size. */
180 struct mlx5_txq_obj *obj; /* Verbs/DevX queue object. */
181 struct mlx5_priv *priv; /* Back pointer to private data. */
182 off_t uar_mmap_offset; /* UAR mmap offset for non-primary process. */
183 uint16_t dump_file_n; /* Number of dump files. */
184 struct rte_eth_hairpin_conf hairpin_conf; /* Hairpin configuration. */
185 uint32_t hairpin_status; /* Hairpin binding status. */
186 struct mlx5_txq_data txq; /* Data path structure. */
187 /* Must be the last field in the structure, contains elts[]. */
192 int mlx5_tx_queue_start(struct rte_eth_dev *dev, uint16_t queue_id);
193 int mlx5_tx_queue_stop(struct rte_eth_dev *dev, uint16_t queue_id);
194 int mlx5_tx_queue_start_primary(struct rte_eth_dev *dev, uint16_t queue_id);
195 int mlx5_tx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t queue_id);
196 int mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
197 unsigned int socket, const struct rte_eth_txconf *conf);
198 int mlx5_tx_hairpin_queue_setup
199 (struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
200 const struct rte_eth_hairpin_conf *hairpin_conf);
201 void mlx5_tx_queue_release(struct rte_eth_dev *dev, uint16_t qid);
202 int mlx5_tx_uar_init_secondary(struct rte_eth_dev *dev, int fd);
203 void mlx5_tx_uar_uninit_secondary(struct rte_eth_dev *dev);
204 int mlx5_txq_obj_verify(struct rte_eth_dev *dev);
205 struct mlx5_txq_ctrl *mlx5_txq_new(struct rte_eth_dev *dev, uint16_t idx,
206 uint16_t desc, unsigned int socket,
207 const struct rte_eth_txconf *conf);
208 struct mlx5_txq_ctrl *mlx5_txq_hairpin_new
209 (struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
210 const struct rte_eth_hairpin_conf *hairpin_conf);
211 struct mlx5_txq_ctrl *mlx5_txq_get(struct rte_eth_dev *dev, uint16_t idx);
212 int mlx5_txq_release(struct rte_eth_dev *dev, uint16_t idx);
213 int mlx5_txq_releasable(struct rte_eth_dev *dev, uint16_t idx);
214 int mlx5_txq_verify(struct rte_eth_dev *dev);
215 void txq_alloc_elts(struct mlx5_txq_ctrl *txq_ctrl);
216 void txq_free_elts(struct mlx5_txq_ctrl *txq_ctrl);
217 uint64_t mlx5_get_tx_port_offloads(struct rte_eth_dev *dev);
218 void mlx5_txq_dynf_timestamp_set(struct rte_eth_dev *dev);
222 void mlx5_tx_handle_completion(struct mlx5_txq_data *__rte_restrict txq,
223 unsigned int olx __rte_unused);
224 int mlx5_tx_descriptor_status(void *tx_queue, uint16_t offset);
225 void mlx5_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
226 struct rte_eth_txq_info *qinfo);
227 int mlx5_tx_burst_mode_get(struct rte_eth_dev *dev, uint16_t tx_queue_id,
228 struct rte_eth_burst_mode *mode);
232 MLX5_TXOFF_PRE_DECL(full_empw);
233 MLX5_TXOFF_PRE_DECL(none_empw);
234 MLX5_TXOFF_PRE_DECL(md_empw);
235 MLX5_TXOFF_PRE_DECL(mt_empw);
236 MLX5_TXOFF_PRE_DECL(mtsc_empw);
237 MLX5_TXOFF_PRE_DECL(mti_empw);
238 MLX5_TXOFF_PRE_DECL(mtv_empw);
239 MLX5_TXOFF_PRE_DECL(mtiv_empw);
240 MLX5_TXOFF_PRE_DECL(sc_empw);
241 MLX5_TXOFF_PRE_DECL(sci_empw);
242 MLX5_TXOFF_PRE_DECL(scv_empw);
243 MLX5_TXOFF_PRE_DECL(sciv_empw);
244 MLX5_TXOFF_PRE_DECL(i_empw);
245 MLX5_TXOFF_PRE_DECL(v_empw);
246 MLX5_TXOFF_PRE_DECL(iv_empw);
248 /* mlx5_tx_nompw.c */
250 MLX5_TXOFF_PRE_DECL(full);
251 MLX5_TXOFF_PRE_DECL(none);
252 MLX5_TXOFF_PRE_DECL(md);
253 MLX5_TXOFF_PRE_DECL(mt);
254 MLX5_TXOFF_PRE_DECL(mtsc);
255 MLX5_TXOFF_PRE_DECL(mti);
256 MLX5_TXOFF_PRE_DECL(mtv);
257 MLX5_TXOFF_PRE_DECL(mtiv);
258 MLX5_TXOFF_PRE_DECL(sc);
259 MLX5_TXOFF_PRE_DECL(sci);
260 MLX5_TXOFF_PRE_DECL(scv);
261 MLX5_TXOFF_PRE_DECL(sciv);
262 MLX5_TXOFF_PRE_DECL(i);
263 MLX5_TXOFF_PRE_DECL(v);
264 MLX5_TXOFF_PRE_DECL(iv);
268 MLX5_TXOFF_PRE_DECL(full_ts_nompw);
269 MLX5_TXOFF_PRE_DECL(full_ts_nompwi);
270 MLX5_TXOFF_PRE_DECL(full_ts);
271 MLX5_TXOFF_PRE_DECL(full_ts_noi);
272 MLX5_TXOFF_PRE_DECL(none_ts);
273 MLX5_TXOFF_PRE_DECL(mdi_ts);
274 MLX5_TXOFF_PRE_DECL(mti_ts);
275 MLX5_TXOFF_PRE_DECL(mtiv_ts);
279 MLX5_TXOFF_PRE_DECL(none_mpw);
280 MLX5_TXOFF_PRE_DECL(mci_mpw);
281 MLX5_TXOFF_PRE_DECL(mc_mpw);
282 MLX5_TXOFF_PRE_DECL(i_mpw);
284 static __rte_always_inline struct mlx5_uar_data *
285 mlx5_tx_bfreg(struct mlx5_txq_data *txq)
287 return &MLX5_PROC_PRIV(txq->port_id)->uar_table[txq->idx];
291 * Ring TX queue doorbell and flush the update by write memory barrier.
294 * Pointer to TX queue structure.
296 * Pointer to the last WQE posted in the NIC.
298 static __rte_always_inline void
299 mlx5_tx_dbrec(struct mlx5_txq_data *txq, volatile struct mlx5_wqe *wqe)
301 mlx5_doorbell_ring(mlx5_tx_bfreg(txq), *(volatile uint64_t *)wqe,
302 txq->wqe_ci, txq->qp_db, 1);
306 * Convert timestamp from mbuf format to linear counter
307 * of Clock Queue completions (24 bits).
310 * Pointer to the device shared context to fetch Tx
311 * packet pacing timestamp and parameters.
313 * Timestamp from mbuf to convert.
315 * positive or zero value - completion ID to wait.
316 * negative value - conversion error.
318 static __rte_always_inline int32_t
319 mlx5_txpp_convert_tx_ts(struct mlx5_dev_ctx_shared *sh, uint64_t mts)
326 * Read atomically two uint64_t fields and compare lsb bits.
327 * It there is no match - the timestamp was updated in
328 * the service thread, data should be re-read.
330 rte_compiler_barrier();
331 ci = __atomic_load_n(&sh->txpp.ts.ci_ts, __ATOMIC_RELAXED);
332 ts = __atomic_load_n(&sh->txpp.ts.ts, __ATOMIC_RELAXED);
333 rte_compiler_barrier();
334 if (!((ts ^ ci) << (64 - MLX5_CQ_INDEX_WIDTH)))
337 /* Perform the skew correction, positive value to send earlier. */
338 mts -= sh->txpp.skew;
340 if (unlikely(mts >= UINT64_MAX / 2)) {
341 /* We have negative integer, mts is in the past. */
342 __atomic_fetch_add(&sh->txpp.err_ts_past,
343 1, __ATOMIC_RELAXED);
346 tick = sh->txpp.tick;
348 /* Convert delta to completions, round up. */
349 mts = (mts + tick - 1) / tick;
350 if (unlikely(mts >= (1 << MLX5_CQ_INDEX_WIDTH) / 2 - 1)) {
351 /* We have mts is too distant future. */
352 __atomic_fetch_add(&sh->txpp.err_ts_future,
353 1, __ATOMIC_RELAXED);
356 mts <<= 64 - MLX5_CQ_INDEX_WIDTH;
358 ci >>= 64 - MLX5_CQ_INDEX_WIDTH;
363 * Set Software Parser flags and offsets in Ethernet Segment of WQE.
364 * Flags must be preliminary initialized to zero.
367 * Pointer to burst routine local context.
369 * Pointer to store Software Parser flags.
371 * Configured Tx offloads mask. It is fully defined at
372 * compile time and may be used for optimization.
375 * Software Parser offsets packed in dword.
376 * Software Parser flags are set by pointer.
378 static __rte_always_inline uint32_t
379 txq_mbuf_to_swp(struct mlx5_txq_local *__rte_restrict loc,
384 unsigned int idx, off;
387 if (!MLX5_TXOFF_CONFIG(SWP))
389 ol = loc->mbuf->ol_flags;
390 tunnel = ol & RTE_MBUF_F_TX_TUNNEL_MASK;
392 * Check whether Software Parser is required.
393 * Only customized tunnels may ask for.
395 if (likely(tunnel != RTE_MBUF_F_TX_TUNNEL_UDP && tunnel != RTE_MBUF_F_TX_TUNNEL_IP))
398 * The index should have:
399 * bit[0:1] = RTE_MBUF_F_TX_L4_MASK
400 * bit[4] = RTE_MBUF_F_TX_IPV6
401 * bit[8] = RTE_MBUF_F_TX_OUTER_IPV6
402 * bit[9] = RTE_MBUF_F_TX_OUTER_UDP
404 idx = (ol & (RTE_MBUF_F_TX_L4_MASK | RTE_MBUF_F_TX_IPV6 | RTE_MBUF_F_TX_OUTER_IPV6)) >> 52;
405 idx |= (tunnel == RTE_MBUF_F_TX_TUNNEL_UDP) ? (1 << 9) : 0;
406 *swp_flags = mlx5_swp_types_table[idx];
408 * Set offsets for SW parser. Since ConnectX-5, SW parser just
409 * complements HW parser. SW parser starts to engage only if HW parser
410 * can't reach a header. For the older devices, HW parser will not kick
411 * in if any of SWP offsets is set. Therefore, all of the L3 offsets
412 * should be set regardless of HW offload.
414 off = loc->mbuf->outer_l2_len;
415 if (MLX5_TXOFF_CONFIG(VLAN) && ol & RTE_MBUF_F_TX_VLAN)
416 off += sizeof(struct rte_vlan_hdr);
417 set = (off >> 1) << 8; /* Outer L3 offset. */
418 off += loc->mbuf->outer_l3_len;
419 if (tunnel == RTE_MBUF_F_TX_TUNNEL_UDP)
420 set |= off >> 1; /* Outer L4 offset. */
421 if (ol & (RTE_MBUF_F_TX_IPV4 | RTE_MBUF_F_TX_IPV6)) { /* Inner IP. */
422 const uint64_t csum = ol & RTE_MBUF_F_TX_L4_MASK;
423 off += loc->mbuf->l2_len;
424 set |= (off >> 1) << 24; /* Inner L3 offset. */
425 if (csum == RTE_MBUF_F_TX_TCP_CKSUM ||
426 csum == RTE_MBUF_F_TX_UDP_CKSUM ||
427 (MLX5_TXOFF_CONFIG(TSO) && ol & RTE_MBUF_F_TX_TCP_SEG)) {
428 off += loc->mbuf->l3_len;
429 set |= (off >> 1) << 16; /* Inner L4 offset. */
432 set = rte_cpu_to_le_32(set);
437 * Convert the Checksum offloads to Verbs.
440 * Pointer to the mbuf.
443 * Converted checksum flags.
445 static __rte_always_inline uint8_t
446 txq_ol_cksum_to_cs(struct rte_mbuf *buf)
449 uint8_t is_tunnel = !!(buf->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK);
450 const uint64_t ol_flags_mask = RTE_MBUF_F_TX_TCP_SEG | RTE_MBUF_F_TX_L4_MASK |
451 RTE_MBUF_F_TX_IP_CKSUM | RTE_MBUF_F_TX_OUTER_IP_CKSUM;
454 * The index should have:
455 * bit[0] = RTE_MBUF_F_TX_TCP_SEG
456 * bit[2:3] = RTE_MBUF_F_TX_UDP_CKSUM, RTE_MBUF_F_TX_TCP_CKSUM
457 * bit[4] = RTE_MBUF_F_TX_IP_CKSUM
458 * bit[8] = RTE_MBUF_F_TX_OUTER_IP_CKSUM
461 idx = ((buf->ol_flags & ol_flags_mask) >> 50) | (!!is_tunnel << 9);
462 return mlx5_cksum_table[idx];
466 * Free the mbufs from the linear array of pointers.
469 * Pointer to Tx queue structure.
471 * Pointer to array of packets to be free.
473 * Number of packets to be freed.
475 * Configured Tx offloads mask. It is fully defined at
476 * compile time and may be used for optimization.
478 static __rte_always_inline void
479 mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
480 struct rte_mbuf **__rte_restrict pkts,
482 unsigned int olx __rte_unused)
484 struct rte_mempool *pool = NULL;
485 struct rte_mbuf **p_free = NULL;
486 struct rte_mbuf *mbuf;
487 unsigned int n_free = 0;
490 * The implemented algorithm eliminates
491 * copying pointers to temporary array
492 * for rte_mempool_put_bulk() calls.
497 * Free mbufs directly to the pool in bulk
498 * if fast free offload is engaged
500 if (!MLX5_TXOFF_CONFIG(MULTI) && txq->fast_free) {
503 rte_mempool_put_bulk(pool, (void *)pkts, pkts_n);
509 * Decrement mbuf reference counter, detach
510 * indirect and external buffers if needed.
512 mbuf = rte_pktmbuf_prefree_seg(*pkts);
513 if (likely(mbuf != NULL)) {
514 MLX5_ASSERT(mbuf == *pkts);
515 if (likely(n_free != 0)) {
516 if (unlikely(pool != mbuf->pool))
517 /* From different pool. */
520 /* Start new scan array. */
527 if (unlikely(pkts_n == 0)) {
533 * This happens if mbuf is still referenced.
534 * We can't put it back to the pool, skip.
538 if (unlikely(n_free != 0))
539 /* There is some array to free.*/
541 if (unlikely(pkts_n == 0))
542 /* Last mbuf, nothing to free. */
548 * This loop is implemented to avoid multiple
549 * inlining of rte_mempool_put_bulk().
555 * Free the array of pre-freed mbufs
556 * belonging to the same memory pool.
558 rte_mempool_put_bulk(pool, (void *)p_free, n_free);
559 if (unlikely(mbuf != NULL)) {
560 /* There is the request to start new scan. */
565 if (likely(pkts_n != 0))
568 * This is the last mbuf to be freed.
569 * Do one more loop iteration to complete.
570 * This is rare case of the last unique mbuf.
575 if (likely(pkts_n == 0))
584 * No inline version to free buffers for optimal call
585 * on the tx_burst completion.
587 static __rte_noinline void
588 __mlx5_tx_free_mbuf(struct mlx5_txq_data *__rte_restrict txq,
589 struct rte_mbuf **__rte_restrict pkts,
591 unsigned int olx __rte_unused)
593 mlx5_tx_free_mbuf(txq, pkts, pkts_n, olx);
597 * Free the mbuf from the elts ring buffer till new tail.
600 * Pointer to Tx queue structure.
602 * Index in elts to free up to, becomes new elts tail.
604 * Configured Tx offloads mask. It is fully defined at
605 * compile time and may be used for optimization.
607 static __rte_always_inline void
608 mlx5_tx_free_elts(struct mlx5_txq_data *__rte_restrict txq,
610 unsigned int olx __rte_unused)
612 uint16_t n_elts = tail - txq->elts_tail;
615 MLX5_ASSERT(n_elts <= txq->elts_s);
617 * Implement a loop to support ring buffer wraparound
618 * with single inlining of mlx5_tx_free_mbuf().
623 part = txq->elts_s - (txq->elts_tail & txq->elts_m);
624 part = RTE_MIN(part, n_elts);
626 MLX5_ASSERT(part <= txq->elts_s);
627 mlx5_tx_free_mbuf(txq,
628 &txq->elts[txq->elts_tail & txq->elts_m],
630 txq->elts_tail += part;
636 * Store the mbuf being sent into elts ring buffer.
637 * On Tx completion these mbufs will be freed.
640 * Pointer to Tx queue structure.
642 * Pointer to array of packets to be stored.
644 * Number of packets to be stored.
646 * Configured Tx offloads mask. It is fully defined at
647 * compile time and may be used for optimization.
649 static __rte_always_inline void
650 mlx5_tx_copy_elts(struct mlx5_txq_data *__rte_restrict txq,
651 struct rte_mbuf **__rte_restrict pkts,
653 unsigned int olx __rte_unused)
656 struct rte_mbuf **elts = (struct rte_mbuf **)txq->elts;
660 part = txq->elts_s - (txq->elts_head & txq->elts_m);
662 MLX5_ASSERT(part <= txq->elts_s);
663 /* This code is a good candidate for vectorizing with SIMD. */
664 rte_memcpy((void *)(elts + (txq->elts_head & txq->elts_m)),
666 RTE_MIN(part, pkts_n) * sizeof(struct rte_mbuf *));
667 txq->elts_head += pkts_n;
668 if (unlikely(part < pkts_n))
669 /* The copy is wrapping around the elts array. */
670 rte_memcpy((void *)elts, (void *)(pkts + part),
671 (pkts_n - part) * sizeof(struct rte_mbuf *));
675 * Check if the completion request flag should be set in the last WQE.
676 * Both pushed mbufs and WQEs are monitored and the completion request
677 * flag is set if any of thresholds is reached.
680 * Pointer to TX queue structure.
682 * Pointer to burst routine local context.
684 * Configured Tx offloads mask. It is fully defined at
685 * compile time and may be used for optimization.
687 static __rte_always_inline void
688 mlx5_tx_request_completion(struct mlx5_txq_data *__rte_restrict txq,
689 struct mlx5_txq_local *__rte_restrict loc,
692 uint16_t head = txq->elts_head;
695 part = MLX5_TXOFF_CONFIG(INLINE) ?
696 0 : loc->pkts_sent - loc->pkts_copy;
698 if ((uint16_t)(head - txq->elts_comp) >= MLX5_TX_COMP_THRESH ||
699 (MLX5_TXOFF_CONFIG(INLINE) &&
700 (uint16_t)(txq->wqe_ci - txq->wqe_comp) >= txq->wqe_thres)) {
701 volatile struct mlx5_wqe *last = loc->wqe_last;
704 txq->elts_comp = head;
705 if (MLX5_TXOFF_CONFIG(INLINE))
706 txq->wqe_comp = txq->wqe_ci;
707 /* Request unconditional completion on last WQE. */
708 last->cseg.flags = RTE_BE32(MLX5_COMP_ALWAYS <<
709 MLX5_COMP_MODE_OFFSET);
710 /* Save elts_head in dedicated free on completion queue. */
711 #ifdef RTE_LIBRTE_MLX5_DEBUG
712 txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head |
713 (last->cseg.opcode >> 8) << 16;
715 txq->fcqs[txq->cq_pi++ & txq->cqe_m] = head;
717 /* A CQE slot must always be available. */
718 MLX5_ASSERT((txq->cq_pi - txq->cq_ci) <= txq->cqe_s);
723 * Build the Control Segment with specified opcode:
725 * - MLX5_OPCODE_ENHANCED_MPSW
729 * Pointer to TX queue structure.
731 * Pointer to burst routine local context.
733 * Pointer to WQE to fill with built Control Segment.
735 * Supposed length of WQE in segments.
737 * SQ WQE opcode to put into Control Segment.
739 * Configured Tx offloads mask. It is fully defined at
740 * compile time and may be used for optimization.
742 static __rte_always_inline void
743 mlx5_tx_cseg_init(struct mlx5_txq_data *__rte_restrict txq,
744 struct mlx5_txq_local *__rte_restrict loc __rte_unused,
745 struct mlx5_wqe *__rte_restrict wqe,
748 unsigned int olx __rte_unused)
750 struct mlx5_wqe_cseg *__rte_restrict cs = &wqe->cseg;
752 /* For legacy MPW replace the EMPW by TSO with modifier. */
753 if (MLX5_TXOFF_CONFIG(MPW) && opcode == MLX5_OPCODE_ENHANCED_MPSW)
754 opcode = MLX5_OPCODE_TSO | MLX5_OPC_MOD_MPW << 24;
755 cs->opcode = rte_cpu_to_be_32((txq->wqe_ci << 8) | opcode);
756 cs->sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
757 cs->flags = RTE_BE32(MLX5_COMP_ONLY_FIRST_ERR <<
758 MLX5_COMP_MODE_OFFSET);
759 cs->misc = RTE_BE32(0);
763 * Build the Synchronize Queue Segment with specified completion index.
766 * Pointer to TX queue structure.
768 * Pointer to burst routine local context.
770 * Pointer to WQE to fill with built Control Segment.
772 * Completion index in Clock Queue to wait.
774 * Configured Tx offloads mask. It is fully defined at
775 * compile time and may be used for optimization.
777 static __rte_always_inline void
778 mlx5_tx_qseg_init(struct mlx5_txq_data *restrict txq,
779 struct mlx5_txq_local *restrict loc __rte_unused,
780 struct mlx5_wqe *restrict wqe,
782 unsigned int olx __rte_unused)
784 struct mlx5_wqe_qseg *qs;
786 qs = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
787 qs->max_index = rte_cpu_to_be_32(wci);
788 qs->qpn_cqn = rte_cpu_to_be_32(txq->sh->txpp.clock_queue.cq_obj.cq->id);
789 qs->reserved0 = RTE_BE32(0);
790 qs->reserved1 = RTE_BE32(0);
794 * Build the Wait on Time Segment with specified timestamp value.
797 * Pointer to TX queue structure.
799 * Pointer to burst routine local context.
801 * Pointer to WQE to fill with built Control Segment.
803 * Timesatmp value to wait.
805 * Configured Tx offloads mask. It is fully defined at
806 * compile time and may be used for optimization.
808 static __rte_always_inline void
809 mlx5_tx_wseg_init(struct mlx5_txq_data *restrict txq,
810 struct mlx5_txq_local *restrict loc __rte_unused,
811 struct mlx5_wqe *restrict wqe,
813 unsigned int olx __rte_unused)
815 struct mlx5_wqe_wseg *ws;
817 ws = RTE_PTR_ADD(wqe, MLX5_WSEG_SIZE);
818 ws->operation = rte_cpu_to_be_32(MLX5_WAIT_COND_CYCLIC_BIGGER);
819 ws->lkey = RTE_BE32(0);
820 ws->va_high = RTE_BE32(0);
821 ws->va_low = RTE_BE32(0);
822 if (txq->rt_timestamp) {
823 ts = ts % (uint64_t)NS_PER_S
824 | (ts / (uint64_t)NS_PER_S) << 32;
826 ws->value = rte_cpu_to_be_64(ts);
827 ws->mask = txq->rt_timemask;
831 * Build the Ethernet Segment without inlined data.
832 * Supports Software Parser, Checksums and VLAN insertion Tx offload features.
835 * Pointer to TX queue structure.
837 * Pointer to burst routine local context.
839 * Pointer to WQE to fill with built Ethernet Segment.
841 * Configured Tx offloads mask. It is fully defined at
842 * compile time and may be used for optimization.
844 static __rte_always_inline void
845 mlx5_tx_eseg_none(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
846 struct mlx5_txq_local *__rte_restrict loc,
847 struct mlx5_wqe *__rte_restrict wqe,
850 struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
854 * Calculate and set check sum flags first, dword field
855 * in segment may be shared with Software Parser flags.
857 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
858 es->flags = rte_cpu_to_le_32(csum);
860 * Calculate and set Software Parser offsets and flags.
861 * These flags a set for custom UDP and IP tunnel packets.
863 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
864 /* Fill metadata field if needed. */
865 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
866 loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
867 rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
869 /* Engage VLAN tag insertion feature if requested. */
870 if (MLX5_TXOFF_CONFIG(VLAN) &&
871 loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
873 * We should get here only if device support
874 * this feature correctly.
876 MLX5_ASSERT(txq->vlan_en);
877 es->inline_hdr = rte_cpu_to_be_32(MLX5_ETH_WQE_VLAN_INSERT |
878 loc->mbuf->vlan_tci);
880 es->inline_hdr = RTE_BE32(0);
885 * Build the Ethernet Segment with minimal inlined data
886 * of MLX5_ESEG_MIN_INLINE_SIZE bytes length. This is
887 * used to fill the gap in single WQEBB WQEs.
888 * Supports Software Parser, Checksums and VLAN
889 * insertion Tx offload features.
892 * Pointer to TX queue structure.
894 * Pointer to burst routine local context.
896 * Pointer to WQE to fill with built Ethernet Segment.
898 * Length of VLAN tag insertion if any.
900 * Configured Tx offloads mask. It is fully defined at
901 * compile time and may be used for optimization.
903 static __rte_always_inline void
904 mlx5_tx_eseg_dmin(struct mlx5_txq_data *__rte_restrict txq __rte_unused,
905 struct mlx5_txq_local *__rte_restrict loc,
906 struct mlx5_wqe *__rte_restrict wqe,
910 struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
912 uint8_t *psrc, *pdst;
915 * Calculate and set check sum flags first, dword field
916 * in segment may be shared with Software Parser flags.
918 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
919 es->flags = rte_cpu_to_le_32(csum);
921 * Calculate and set Software Parser offsets and flags.
922 * These flags a set for custom UDP and IP tunnel packets.
924 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
925 /* Fill metadata field if needed. */
926 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
927 loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
928 rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
930 psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
931 es->inline_hdr_sz = RTE_BE16(MLX5_ESEG_MIN_INLINE_SIZE);
932 es->inline_data = *(unaligned_uint16_t *)psrc;
933 psrc += sizeof(uint16_t);
934 pdst = (uint8_t *)(es + 1);
935 if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
936 /* Implement VLAN tag insertion as part inline data. */
937 memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
938 pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
939 psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
940 /* Insert VLAN ethertype + VLAN tag. */
941 *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
942 ((RTE_ETHER_TYPE_VLAN << 16) |
943 loc->mbuf->vlan_tci);
944 pdst += sizeof(struct rte_vlan_hdr);
945 /* Copy the rest two bytes from packet data. */
946 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
947 *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
949 /* Fill the gap in the title WQEBB with inline data. */
950 rte_mov16(pdst, psrc);
955 * Build the Ethernet Segment with entire packet data inlining. Checks the
956 * boundary of WQEBB and ring buffer wrapping, supports Software Parser,
957 * Checksums and VLAN insertion Tx offload features.
960 * Pointer to TX queue structure.
962 * Pointer to burst routine local context.
964 * Pointer to WQE to fill with built Ethernet Segment.
966 * Length of VLAN tag insertion if any.
968 * Length of data to inline (VLAN included, if any).
970 * TSO flag, set mss field from the packet.
972 * Configured Tx offloads mask. It is fully defined at
973 * compile time and may be used for optimization.
976 * Pointer to the next Data Segment (aligned and wrapped around).
978 static __rte_always_inline struct mlx5_wqe_dseg *
979 mlx5_tx_eseg_data(struct mlx5_txq_data *__rte_restrict txq,
980 struct mlx5_txq_local *__rte_restrict loc,
981 struct mlx5_wqe *__rte_restrict wqe,
987 struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
989 uint8_t *psrc, *pdst;
993 * Calculate and set check sum flags first, dword field
994 * in segment may be shared with Software Parser flags.
996 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
999 csum |= loc->mbuf->tso_segsz;
1000 es->flags = rte_cpu_to_be_32(csum);
1002 es->flags = rte_cpu_to_le_32(csum);
1005 * Calculate and set Software Parser offsets and flags.
1006 * These flags a set for custom UDP and IP tunnel packets.
1008 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
1009 /* Fill metadata field if needed. */
1010 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
1011 loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
1012 rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
1014 psrc = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
1015 es->inline_hdr_sz = rte_cpu_to_be_16(inlen);
1016 es->inline_data = *(unaligned_uint16_t *)psrc;
1017 psrc += sizeof(uint16_t);
1018 pdst = (uint8_t *)(es + 1);
1019 if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
1020 /* Implement VLAN tag insertion as part inline data. */
1021 memcpy(pdst, psrc, 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t));
1022 pdst += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
1023 psrc += 2 * RTE_ETHER_ADDR_LEN - sizeof(uint16_t);
1024 /* Insert VLAN ethertype + VLAN tag. */
1025 *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
1026 ((RTE_ETHER_TYPE_VLAN << 16) |
1027 loc->mbuf->vlan_tci);
1028 pdst += sizeof(struct rte_vlan_hdr);
1029 /* Copy the rest two bytes from packet data. */
1030 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, sizeof(uint16_t)));
1031 *(uint16_t *)pdst = *(unaligned_uint16_t *)psrc;
1032 psrc += sizeof(uint16_t);
1034 /* Fill the gap in the title WQEBB with inline data. */
1035 rte_mov16(pdst, psrc);
1036 psrc += sizeof(rte_v128u32_t);
1038 pdst = (uint8_t *)(es + 2);
1039 MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
1040 MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
1041 inlen -= MLX5_ESEG_MIN_INLINE_SIZE;
1043 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
1044 return (struct mlx5_wqe_dseg *)pdst;
1047 * The WQEBB space availability is checked by caller.
1048 * Here we should be aware of WQE ring buffer wraparound only.
1050 part = (uint8_t *)txq->wqes_end - pdst;
1051 part = RTE_MIN(part, inlen);
1053 rte_memcpy(pdst, psrc, part);
1055 if (likely(!inlen)) {
1057 * If return value is not used by the caller
1058 * the code below will be optimized out.
1061 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
1062 if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
1063 pdst = (uint8_t *)txq->wqes;
1064 return (struct mlx5_wqe_dseg *)pdst;
1066 pdst = (uint8_t *)txq->wqes;
1073 * Copy data from chain of mbuf to the specified linear buffer.
1074 * Checksums and VLAN insertion Tx offload features. If data
1075 * from some mbuf copied completely this mbuf is freed. Local
1076 * structure is used to keep the byte stream state.
1079 * Pointer to the destination linear buffer.
1081 * Pointer to burst routine local context.
1083 * Length of data to be copied.
1085 * Length of data to be copied ignoring no inline hint.
1087 * Configured Tx offloads mask. It is fully defined at
1088 * compile time and may be used for optimization.
1091 * Number of actual copied data bytes. This is always greater than or
1092 * equal to must parameter and might be lesser than len in no inline
1093 * hint flag is encountered.
1095 static __rte_always_inline unsigned int
1096 mlx5_tx_mseg_memcpy(uint8_t *pdst,
1097 struct mlx5_txq_local *__rte_restrict loc,
1100 unsigned int olx __rte_unused)
1102 struct rte_mbuf *mbuf;
1103 unsigned int part, dlen, copy = 0;
1108 /* Allow zero length packets, must check first. */
1109 dlen = rte_pktmbuf_data_len(loc->mbuf);
1110 if (dlen <= loc->mbuf_off) {
1111 /* Exhausted packet, just free. */
1113 loc->mbuf = mbuf->next;
1114 rte_pktmbuf_free_seg(mbuf);
1116 MLX5_ASSERT(loc->mbuf_nseg > 1);
1117 MLX5_ASSERT(loc->mbuf);
1119 if (loc->mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE) {
1124 * We already copied the minimal
1125 * requested amount of data.
1130 if (diff <= rte_pktmbuf_data_len(loc->mbuf)) {
1132 * Copy only the minimal required
1133 * part of the data buffer. Limit amount
1134 * of data to be copied to the length of
1137 len = RTE_MIN(len, diff);
1142 dlen -= loc->mbuf_off;
1143 psrc = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
1145 part = RTE_MIN(len, dlen);
1146 rte_memcpy(pdst, psrc, part);
1148 loc->mbuf_off += part;
1151 if (loc->mbuf_off >= rte_pktmbuf_data_len(loc->mbuf)) {
1153 /* Exhausted packet, just free. */
1155 loc->mbuf = mbuf->next;
1156 rte_pktmbuf_free_seg(mbuf);
1158 MLX5_ASSERT(loc->mbuf_nseg >= 1);
1168 * Build the Ethernet Segment with inlined data from multi-segment packet.
1169 * Checks the boundary of WQEBB and ring buffer wrapping, supports Software
1170 * Parser, Checksums and VLAN insertion Tx offload features.
1173 * Pointer to TX queue structure.
1175 * Pointer to burst routine local context.
1177 * Pointer to WQE to fill with built Ethernet Segment.
1179 * Length of VLAN tag insertion if any.
1181 * Length of data to inline (VLAN included, if any).
1183 * TSO flag, set mss field from the packet.
1185 * Configured Tx offloads mask. It is fully defined at
1186 * compile time and may be used for optimization.
1189 * Pointer to the next Data Segment (aligned and possible NOT wrapped
1190 * around - caller should do wrapping check on its own).
1192 static __rte_always_inline struct mlx5_wqe_dseg *
1193 mlx5_tx_eseg_mdat(struct mlx5_txq_data *__rte_restrict txq,
1194 struct mlx5_txq_local *__rte_restrict loc,
1195 struct mlx5_wqe *__rte_restrict wqe,
1201 struct mlx5_wqe_eseg *__rte_restrict es = &wqe->eseg;
1204 unsigned int part, tlen = 0;
1207 * Calculate and set check sum flags first, uint32_t field
1208 * in segment may be shared with Software Parser flags.
1210 csum = MLX5_TXOFF_CONFIG(CSUM) ? txq_ol_cksum_to_cs(loc->mbuf) : 0;
1213 csum |= loc->mbuf->tso_segsz;
1214 es->flags = rte_cpu_to_be_32(csum);
1216 es->flags = rte_cpu_to_le_32(csum);
1219 * Calculate and set Software Parser offsets and flags.
1220 * These flags a set for custom UDP and IP tunnel packets.
1222 es->swp_offs = txq_mbuf_to_swp(loc, &es->swp_flags, olx);
1223 /* Fill metadata field if needed. */
1224 es->metadata = MLX5_TXOFF_CONFIG(METADATA) ?
1225 loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
1226 rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) :
1228 MLX5_ASSERT(inlen >= MLX5_ESEG_MIN_INLINE_SIZE);
1229 pdst = (uint8_t *)&es->inline_data;
1230 if (MLX5_TXOFF_CONFIG(VLAN) && vlan) {
1231 /* Implement VLAN tag insertion as part inline data. */
1232 mlx5_tx_mseg_memcpy(pdst, loc,
1233 2 * RTE_ETHER_ADDR_LEN,
1234 2 * RTE_ETHER_ADDR_LEN, olx);
1235 pdst += 2 * RTE_ETHER_ADDR_LEN;
1236 *(unaligned_uint32_t *)pdst = rte_cpu_to_be_32
1237 ((RTE_ETHER_TYPE_VLAN << 16) |
1238 loc->mbuf->vlan_tci);
1239 pdst += sizeof(struct rte_vlan_hdr);
1240 tlen += 2 * RTE_ETHER_ADDR_LEN + sizeof(struct rte_vlan_hdr);
1242 MLX5_ASSERT(pdst < (uint8_t *)txq->wqes_end);
1244 * The WQEBB space availability is checked by caller.
1245 * Here we should be aware of WQE ring buffer wraparound only.
1247 part = (uint8_t *)txq->wqes_end - pdst;
1248 part = RTE_MIN(part, inlen - tlen);
1254 * Copying may be interrupted inside the routine
1255 * if run into no inline hint flag.
1257 copy = tso ? inlen : txq->inlen_mode;
1258 copy = tlen >= copy ? 0 : (copy - tlen);
1259 copy = mlx5_tx_mseg_memcpy(pdst, loc, part, copy, olx);
1261 if (likely(inlen <= tlen) || copy < part) {
1262 es->inline_hdr_sz = rte_cpu_to_be_16(tlen);
1264 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
1265 return (struct mlx5_wqe_dseg *)pdst;
1267 pdst = (uint8_t *)txq->wqes;
1268 part = inlen - tlen;
1273 * Build the Data Segment of pointer type.
1276 * Pointer to TX queue structure.
1278 * Pointer to burst routine local context.
1280 * Pointer to WQE to fill with built Data Segment.
1282 * Data buffer to point.
1284 * Data buffer length.
1286 * Configured Tx offloads mask. It is fully defined at
1287 * compile time and may be used for optimization.
1289 static __rte_always_inline void
1290 mlx5_tx_dseg_ptr(struct mlx5_txq_data *__rte_restrict txq,
1291 struct mlx5_txq_local *__rte_restrict loc,
1292 struct mlx5_wqe_dseg *__rte_restrict dseg,
1295 unsigned int olx __rte_unused)
1299 dseg->bcount = rte_cpu_to_be_32(len);
1300 dseg->lkey = mlx5_mr_mb2mr(&txq->mr_ctrl, loc->mbuf);
1301 dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
1305 * Build the Data Segment of pointer type or inline if data length is less than
1306 * buffer in minimal Data Segment size.
1309 * Pointer to TX queue structure.
1311 * Pointer to burst routine local context.
1313 * Pointer to WQE to fill with built Data Segment.
1315 * Data buffer to point.
1317 * Data buffer length.
1319 * Configured Tx offloads mask. It is fully defined at
1320 * compile time and may be used for optimization.
1322 static __rte_always_inline void
1323 mlx5_tx_dseg_iptr(struct mlx5_txq_data *__rte_restrict txq,
1324 struct mlx5_txq_local *__rte_restrict loc,
1325 struct mlx5_wqe_dseg *__rte_restrict dseg,
1328 unsigned int olx __rte_unused)
1334 if (len > MLX5_DSEG_MIN_INLINE_SIZE) {
1335 dseg->bcount = rte_cpu_to_be_32(len);
1336 dseg->lkey = mlx5_mr_mb2mr(&txq->mr_ctrl, loc->mbuf);
1337 dseg->pbuf = rte_cpu_to_be_64((uintptr_t)buf);
1341 dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
1342 /* Unrolled implementation of generic rte_memcpy. */
1343 dst = (uintptr_t)&dseg->inline_data[0];
1344 src = (uintptr_t)buf;
1346 #ifdef RTE_ARCH_STRICT_ALIGN
1347 MLX5_ASSERT(dst == RTE_PTR_ALIGN(dst, sizeof(uint32_t)));
1348 *(uint32_t *)dst = *(unaligned_uint32_t *)src;
1349 dst += sizeof(uint32_t);
1350 src += sizeof(uint32_t);
1351 *(uint32_t *)dst = *(unaligned_uint32_t *)src;
1352 dst += sizeof(uint32_t);
1353 src += sizeof(uint32_t);
1355 *(uint64_t *)dst = *(unaligned_uint64_t *)src;
1356 dst += sizeof(uint64_t);
1357 src += sizeof(uint64_t);
1361 *(uint32_t *)dst = *(unaligned_uint32_t *)src;
1362 dst += sizeof(uint32_t);
1363 src += sizeof(uint32_t);
1366 *(uint16_t *)dst = *(unaligned_uint16_t *)src;
1367 dst += sizeof(uint16_t);
1368 src += sizeof(uint16_t);
1371 *(uint8_t *)dst = *(uint8_t *)src;
1375 * Build the Data Segment of inlined data from single
1376 * segment packet, no VLAN insertion.
1379 * Pointer to TX queue structure.
1381 * Pointer to burst routine local context.
1383 * Pointer to WQE to fill with built Data Segment.
1385 * Data buffer to point.
1387 * Data buffer length.
1389 * Configured Tx offloads mask. It is fully defined at
1390 * compile time and may be used for optimization.
1393 * Pointer to the next Data Segment after inlined data.
1394 * Ring buffer wraparound check is needed. We do not do it here because it
1395 * may not be needed for the last packet in the eMPW session.
1397 static __rte_always_inline struct mlx5_wqe_dseg *
1398 mlx5_tx_dseg_empw(struct mlx5_txq_data *__rte_restrict txq,
1399 struct mlx5_txq_local *__rte_restrict loc __rte_unused,
1400 struct mlx5_wqe_dseg *__rte_restrict dseg,
1403 unsigned int olx __rte_unused)
1408 if (!MLX5_TXOFF_CONFIG(MPW)) {
1409 /* Store the descriptor byte counter for eMPW sessions. */
1410 dseg->bcount = rte_cpu_to_be_32(len | MLX5_ETH_WQE_DATA_INLINE);
1411 pdst = &dseg->inline_data[0];
1413 /* The entire legacy MPW session counter is stored on close. */
1414 pdst = (uint8_t *)dseg;
1417 * The WQEBB space availability is checked by caller.
1418 * Here we should be aware of WQE ring buffer wraparound only.
1420 part = (uint8_t *)txq->wqes_end - pdst;
1421 part = RTE_MIN(part, len);
1423 rte_memcpy(pdst, buf, part);
1427 if (!MLX5_TXOFF_CONFIG(MPW))
1428 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
1429 /* Note: no final wraparound check here. */
1430 return (struct mlx5_wqe_dseg *)pdst;
1432 pdst = (uint8_t *)txq->wqes;
1439 * Build the Data Segment of inlined data from single
1440 * segment packet with VLAN insertion.
1443 * Pointer to TX queue structure.
1445 * Pointer to burst routine local context.
1447 * Pointer to the dseg fill with built Data Segment.
1449 * Data buffer to point.
1451 * Data buffer length.
1453 * Configured Tx offloads mask. It is fully defined at
1454 * compile time and may be used for optimization.
1457 * Pointer to the next Data Segment after inlined data.
1458 * Ring buffer wraparound check is needed.
1460 static __rte_always_inline struct mlx5_wqe_dseg *
1461 mlx5_tx_dseg_vlan(struct mlx5_txq_data *__rte_restrict txq,
1462 struct mlx5_txq_local *__rte_restrict loc __rte_unused,
1463 struct mlx5_wqe_dseg *__rte_restrict dseg,
1466 unsigned int olx __rte_unused)
1472 MLX5_ASSERT(len > MLX5_ESEG_MIN_INLINE_SIZE);
1473 if (!MLX5_TXOFF_CONFIG(MPW)) {
1474 /* Store the descriptor byte counter for eMPW sessions. */
1475 dseg->bcount = rte_cpu_to_be_32
1476 ((len + sizeof(struct rte_vlan_hdr)) |
1477 MLX5_ETH_WQE_DATA_INLINE);
1478 pdst = &dseg->inline_data[0];
1480 /* The entire legacy MPW session counter is stored on close. */
1481 pdst = (uint8_t *)dseg;
1483 memcpy(pdst, buf, MLX5_DSEG_MIN_INLINE_SIZE);
1484 buf += MLX5_DSEG_MIN_INLINE_SIZE;
1485 pdst += MLX5_DSEG_MIN_INLINE_SIZE;
1486 len -= MLX5_DSEG_MIN_INLINE_SIZE;
1487 /* Insert VLAN ethertype + VLAN tag. Pointer is aligned. */
1488 MLX5_ASSERT(pdst == RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE));
1489 if (unlikely(pdst >= (uint8_t *)txq->wqes_end))
1490 pdst = (uint8_t *)txq->wqes;
1491 *(uint32_t *)pdst = rte_cpu_to_be_32((RTE_ETHER_TYPE_VLAN << 16) |
1492 loc->mbuf->vlan_tci);
1493 pdst += sizeof(struct rte_vlan_hdr);
1495 * The WQEBB space availability is checked by caller.
1496 * Here we should be aware of WQE ring buffer wraparound only.
1498 part = (uint8_t *)txq->wqes_end - pdst;
1499 part = RTE_MIN(part, len);
1501 rte_memcpy(pdst, buf, part);
1505 if (!MLX5_TXOFF_CONFIG(MPW))
1506 pdst = RTE_PTR_ALIGN(pdst, MLX5_WSEG_SIZE);
1507 /* Note: no final wraparound check here. */
1508 return (struct mlx5_wqe_dseg *)pdst;
1510 pdst = (uint8_t *)txq->wqes;
1517 * Build the Ethernet Segment with optionally inlined data with
1518 * VLAN insertion and following Data Segments (if any) from
1519 * multi-segment packet. Used by ordinary send and TSO.
1522 * Pointer to TX queue structure.
1524 * Pointer to burst routine local context.
1526 * Pointer to WQE to fill with built Ethernet/Data Segments.
1528 * Length of VLAN header to insert, 0 means no VLAN insertion.
1530 * Data length to inline. For TSO this parameter specifies exact value,
1531 * for ordinary send routine can be aligned by caller to provide better WQE
1532 * space saving and data buffer start address alignment.
1533 * This length includes VLAN header being inserted.
1535 * Zero means ordinary send, inlined data can be extended,
1536 * otherwise this is TSO, inlined data length is fixed.
1538 * Configured Tx offloads mask. It is fully defined at
1539 * compile time and may be used for optimization.
1542 * Actual size of built WQE in segments.
1544 static __rte_always_inline unsigned int
1545 mlx5_tx_mseg_build(struct mlx5_txq_data *__rte_restrict txq,
1546 struct mlx5_txq_local *__rte_restrict loc,
1547 struct mlx5_wqe *__rte_restrict wqe,
1551 unsigned int olx __rte_unused)
1553 struct mlx5_wqe_dseg *__rte_restrict dseg;
1556 MLX5_ASSERT((rte_pktmbuf_pkt_len(loc->mbuf) + vlan) >= inlen);
1557 loc->mbuf_nseg = NB_SEGS(loc->mbuf);
1560 dseg = mlx5_tx_eseg_mdat(txq, loc, wqe, vlan, inlen, tso, olx);
1561 if (!loc->mbuf_nseg)
1564 * There are still some mbuf remaining, not inlined.
1565 * The first mbuf may be partially inlined and we
1566 * must process the possible non-zero data offset.
1568 if (loc->mbuf_off) {
1573 * Exhausted packets must be dropped before.
1574 * Non-zero offset means there are some data
1575 * remained in the packet.
1577 MLX5_ASSERT(loc->mbuf_off < rte_pktmbuf_data_len(loc->mbuf));
1578 MLX5_ASSERT(rte_pktmbuf_data_len(loc->mbuf));
1579 dptr = rte_pktmbuf_mtod_offset(loc->mbuf, uint8_t *,
1581 dlen = rte_pktmbuf_data_len(loc->mbuf) - loc->mbuf_off;
1583 * Build the pointer/minimal Data Segment.
1584 * Do ring buffer wrapping check in advance.
1586 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
1587 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
1588 mlx5_tx_dseg_iptr(txq, loc, dseg, dptr, dlen, olx);
1589 /* Store the mbuf to be freed on completion. */
1590 MLX5_ASSERT(loc->elts_free);
1591 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
1594 if (--loc->mbuf_nseg == 0)
1596 loc->mbuf = loc->mbuf->next;
1600 if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
1601 struct rte_mbuf *mbuf;
1603 /* Zero length segment found, just skip. */
1605 loc->mbuf = loc->mbuf->next;
1606 rte_pktmbuf_free_seg(mbuf);
1607 if (--loc->mbuf_nseg == 0)
1610 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
1611 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
1614 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
1615 rte_pktmbuf_data_len(loc->mbuf), olx);
1616 MLX5_ASSERT(loc->elts_free);
1617 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
1620 if (--loc->mbuf_nseg == 0)
1622 loc->mbuf = loc->mbuf->next;
1627 /* Calculate actual segments used from the dseg pointer. */
1628 if ((uintptr_t)wqe < (uintptr_t)dseg)
1629 ds = ((uintptr_t)dseg - (uintptr_t)wqe) / MLX5_WSEG_SIZE;
1631 ds = (((uintptr_t)dseg - (uintptr_t)wqe) +
1632 txq->wqe_s * MLX5_WQE_SIZE) / MLX5_WSEG_SIZE;
1637 * The routine checks timestamp flag in the current packet,
1638 * and push WAIT WQE into the queue if scheduling is required.
1641 * Pointer to TX queue structure.
1643 * Pointer to burst routine local context.
1645 * Configured Tx offloads mask. It is fully defined at
1646 * compile time and may be used for optimization.
1649 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
1650 * MLX5_TXCMP_CODE_SINGLE - continue processing with the packet.
1651 * MLX5_TXCMP_CODE_MULTI - the WAIT inserted, continue processing.
1652 * Local context variables partially updated.
1654 static __rte_always_inline enum mlx5_txcmp_code
1655 mlx5_tx_schedule_send(struct mlx5_txq_data *restrict txq,
1656 struct mlx5_txq_local *restrict loc,
1659 if (MLX5_TXOFF_CONFIG(TXPP) &&
1660 loc->mbuf->ol_flags & txq->ts_mask) {
1661 struct mlx5_dev_ctx_shared *sh;
1662 struct mlx5_wqe *wqe;
1666 * Estimate the required space quickly and roughly.
1667 * We would like to ensure the packet can be pushed
1668 * to the queue and we won't get the orphan WAIT WQE.
1670 if (loc->wqe_free <= MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE ||
1671 loc->elts_free < NB_SEGS(loc->mbuf))
1672 return MLX5_TXCMP_CODE_EXIT;
1673 /* Convert the timestamp into completion to wait. */
1674 ts = *RTE_MBUF_DYNFIELD(loc->mbuf, txq->ts_offset, uint64_t *);
1675 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
1677 if (txq->wait_on_time) {
1678 /* The wait on time capability should be used. */
1679 ts -= sh->txpp.skew;
1680 mlx5_tx_cseg_init(txq, loc, wqe,
1681 1 + sizeof(struct mlx5_wqe_wseg) /
1684 MLX5_OPC_MOD_WAIT_TIME << 24, olx);
1685 mlx5_tx_wseg_init(txq, loc, wqe, ts, olx);
1687 /* Legacy cross-channel operation should be used. */
1690 wci = mlx5_txpp_convert_tx_ts(sh, ts);
1691 if (unlikely(wci < 0))
1692 return MLX5_TXCMP_CODE_SINGLE;
1693 /* Build the WAIT WQE with specified completion. */
1694 mlx5_tx_cseg_init(txq, loc, wqe,
1695 1 + sizeof(struct mlx5_wqe_qseg) /
1698 MLX5_OPC_MOD_WAIT_CQ_PI << 24, olx);
1699 mlx5_tx_qseg_init(txq, loc, wqe, wci, olx);
1703 return MLX5_TXCMP_CODE_MULTI;
1705 return MLX5_TXCMP_CODE_SINGLE;
1709 * Tx one packet function for multi-segment TSO. Supports all
1710 * types of Tx offloads, uses MLX5_OPCODE_TSO to build WQEs,
1711 * sends one packet per WQE.
1713 * This routine is responsible for storing processed mbuf
1714 * into elts ring buffer and update elts_head.
1717 * Pointer to TX queue structure.
1719 * Pointer to burst routine local context.
1721 * Configured Tx offloads mask. It is fully defined at
1722 * compile time and may be used for optimization.
1725 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
1726 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
1727 * Local context variables partially updated.
1729 static __rte_always_inline enum mlx5_txcmp_code
1730 mlx5_tx_packet_multi_tso(struct mlx5_txq_data *__rte_restrict txq,
1731 struct mlx5_txq_local *__rte_restrict loc,
1734 struct mlx5_wqe *__rte_restrict wqe;
1735 unsigned int ds, dlen, inlen, ntcp, vlan = 0;
1737 if (MLX5_TXOFF_CONFIG(TXPP)) {
1738 enum mlx5_txcmp_code wret;
1740 /* Generate WAIT for scheduling if requested. */
1741 wret = mlx5_tx_schedule_send(txq, loc, olx);
1742 if (wret == MLX5_TXCMP_CODE_EXIT)
1743 return MLX5_TXCMP_CODE_EXIT;
1744 if (wret == MLX5_TXCMP_CODE_ERROR)
1745 return MLX5_TXCMP_CODE_ERROR;
1748 * Calculate data length to be inlined to estimate
1749 * the required space in WQE ring buffer.
1751 dlen = rte_pktmbuf_pkt_len(loc->mbuf);
1752 if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
1753 vlan = sizeof(struct rte_vlan_hdr);
1754 inlen = loc->mbuf->l2_len + vlan +
1755 loc->mbuf->l3_len + loc->mbuf->l4_len;
1756 if (unlikely((!inlen || !loc->mbuf->tso_segsz)))
1757 return MLX5_TXCMP_CODE_ERROR;
1758 if (loc->mbuf->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK)
1759 inlen += loc->mbuf->outer_l2_len + loc->mbuf->outer_l3_len;
1760 /* Packet must contain all TSO headers. */
1761 if (unlikely(inlen > MLX5_MAX_TSO_HEADER ||
1762 inlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
1763 inlen > (dlen + vlan)))
1764 return MLX5_TXCMP_CODE_ERROR;
1766 * Check whether there are enough free WQEBBs:
1768 * - Ethernet Segment
1769 * - First Segment of inlined Ethernet data
1770 * - ... data continued ...
1771 * - Data Segments of pointer/min inline type
1773 ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
1774 MLX5_ESEG_MIN_INLINE_SIZE +
1776 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
1777 if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
1778 return MLX5_TXCMP_CODE_EXIT;
1779 /* Check for maximal WQE size. */
1780 if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
1781 return MLX5_TXCMP_CODE_ERROR;
1782 #ifdef MLX5_PMD_SOFT_COUNTERS
1783 /* Update sent data bytes/packets counters. */
1784 ntcp = (dlen - (inlen - vlan) + loc->mbuf->tso_segsz - 1) /
1785 loc->mbuf->tso_segsz;
1787 * One will be added for mbuf itself at the end of the mlx5_tx_burst
1788 * from loc->pkts_sent field.
1791 txq->stats.opackets += ntcp;
1792 txq->stats.obytes += dlen + vlan + ntcp * inlen;
1794 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
1795 loc->wqe_last = wqe;
1796 mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_TSO, olx);
1797 ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 1, olx);
1798 wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
1799 txq->wqe_ci += (ds + 3) / 4;
1800 loc->wqe_free -= (ds + 3) / 4;
1801 return MLX5_TXCMP_CODE_MULTI;
1805 * Tx one packet function for multi-segment SEND. Supports all types of Tx
1806 * offloads, uses MLX5_OPCODE_SEND to build WQEs, sends one packet per WQE,
1807 * without any data inlining in Ethernet Segment.
1809 * This routine is responsible for storing processed mbuf
1810 * into elts ring buffer and update elts_head.
1813 * Pointer to TX queue structure.
1815 * Pointer to burst routine local context.
1817 * Configured Tx offloads mask. It is fully defined at
1818 * compile time and may be used for optimization.
1821 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
1822 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
1823 * Local context variables partially updated.
1825 static __rte_always_inline enum mlx5_txcmp_code
1826 mlx5_tx_packet_multi_send(struct mlx5_txq_data *__rte_restrict txq,
1827 struct mlx5_txq_local *__rte_restrict loc,
1830 struct mlx5_wqe_dseg *__rte_restrict dseg;
1831 struct mlx5_wqe *__rte_restrict wqe;
1832 unsigned int ds, nseg;
1834 MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
1835 if (MLX5_TXOFF_CONFIG(TXPP)) {
1836 enum mlx5_txcmp_code wret;
1838 /* Generate WAIT for scheduling if requested. */
1839 wret = mlx5_tx_schedule_send(txq, loc, olx);
1840 if (wret == MLX5_TXCMP_CODE_EXIT)
1841 return MLX5_TXCMP_CODE_EXIT;
1842 if (wret == MLX5_TXCMP_CODE_ERROR)
1843 return MLX5_TXCMP_CODE_ERROR;
1846 * No inline at all, it means the CPU cycles saving is prioritized at
1847 * configuration, we should not copy any packet data to WQE.
1849 nseg = NB_SEGS(loc->mbuf);
1851 if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
1852 return MLX5_TXCMP_CODE_EXIT;
1853 /* Check for maximal WQE size. */
1854 if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ((ds + 3) / 4)))
1855 return MLX5_TXCMP_CODE_ERROR;
1857 * Some Tx offloads may cause an error if packet is not long enough,
1858 * check against assumed minimal length.
1860 if (rte_pktmbuf_pkt_len(loc->mbuf) <= MLX5_ESEG_MIN_INLINE_SIZE)
1861 return MLX5_TXCMP_CODE_ERROR;
1862 #ifdef MLX5_PMD_SOFT_COUNTERS
1863 /* Update sent data bytes counter. */
1864 txq->stats.obytes += rte_pktmbuf_pkt_len(loc->mbuf);
1865 if (MLX5_TXOFF_CONFIG(VLAN) &&
1866 loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
1867 txq->stats.obytes += sizeof(struct rte_vlan_hdr);
1870 * SEND WQE, one WQEBB:
1871 * - Control Segment, SEND opcode
1872 * - Ethernet Segment, optional VLAN, no inline
1873 * - Data Segments, pointer only type
1875 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
1876 loc->wqe_last = wqe;
1877 mlx5_tx_cseg_init(txq, loc, wqe, ds, MLX5_OPCODE_SEND, olx);
1878 mlx5_tx_eseg_none(txq, loc, wqe, olx);
1879 dseg = &wqe->dseg[0];
1881 if (unlikely(!rte_pktmbuf_data_len(loc->mbuf))) {
1882 struct rte_mbuf *mbuf;
1885 * Zero length segment found, have to correct total
1886 * size of WQE in segments.
1887 * It is supposed to be rare occasion, so in normal
1888 * case (no zero length segments) we avoid extra
1889 * writing to the Control Segment.
1892 wqe->cseg.sq_ds -= RTE_BE32(1);
1894 loc->mbuf = mbuf->next;
1895 rte_pktmbuf_free_seg(mbuf);
1901 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
1902 rte_pktmbuf_data_len(loc->mbuf), olx);
1903 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
1908 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
1909 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
1910 loc->mbuf = loc->mbuf->next;
1913 txq->wqe_ci += (ds + 3) / 4;
1914 loc->wqe_free -= (ds + 3) / 4;
1915 return MLX5_TXCMP_CODE_MULTI;
1919 * Tx one packet function for multi-segment SEND. Supports all
1920 * types of Tx offloads, uses MLX5_OPCODE_SEND to build WQEs,
1921 * sends one packet per WQE, with data inlining in
1922 * Ethernet Segment and minimal Data Segments.
1924 * This routine is responsible for storing processed mbuf
1925 * into elts ring buffer and update elts_head.
1928 * Pointer to TX queue structure.
1930 * Pointer to burst routine local context.
1932 * Configured Tx offloads mask. It is fully defined at
1933 * compile time and may be used for optimization.
1936 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
1937 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
1938 * Local context variables partially updated.
1940 static __rte_always_inline enum mlx5_txcmp_code
1941 mlx5_tx_packet_multi_inline(struct mlx5_txq_data *__rte_restrict txq,
1942 struct mlx5_txq_local *__rte_restrict loc,
1945 struct mlx5_wqe *__rte_restrict wqe;
1946 unsigned int ds, inlen, dlen, vlan = 0;
1948 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
1949 MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
1950 if (MLX5_TXOFF_CONFIG(TXPP)) {
1951 enum mlx5_txcmp_code wret;
1953 /* Generate WAIT for scheduling if requested. */
1954 wret = mlx5_tx_schedule_send(txq, loc, olx);
1955 if (wret == MLX5_TXCMP_CODE_EXIT)
1956 return MLX5_TXCMP_CODE_EXIT;
1957 if (wret == MLX5_TXCMP_CODE_ERROR)
1958 return MLX5_TXCMP_CODE_ERROR;
1961 * First calculate data length to be inlined
1962 * to estimate the required space for WQE.
1964 dlen = rte_pktmbuf_pkt_len(loc->mbuf);
1965 if (MLX5_TXOFF_CONFIG(VLAN) && loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
1966 vlan = sizeof(struct rte_vlan_hdr);
1967 inlen = dlen + vlan;
1968 /* Check against minimal length. */
1969 if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
1970 return MLX5_TXCMP_CODE_ERROR;
1971 MLX5_ASSERT(txq->inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE);
1972 if (inlen > txq->inlen_send ||
1973 loc->mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE) {
1974 struct rte_mbuf *mbuf;
1979 nxlen = rte_pktmbuf_data_len(mbuf);
1981 * Packet length exceeds the allowed inline data length,
1982 * check whether the minimal inlining is required.
1984 if (txq->inlen_mode) {
1985 MLX5_ASSERT(txq->inlen_mode >=
1986 MLX5_ESEG_MIN_INLINE_SIZE);
1987 MLX5_ASSERT(txq->inlen_mode <= txq->inlen_send);
1988 inlen = RTE_MIN(txq->inlen_mode, inlen);
1989 } else if (vlan && !txq->vlan_en) {
1991 * VLAN insertion is requested and hardware does not
1992 * support the offload, will do with software inline.
1994 inlen = MLX5_ESEG_MIN_INLINE_SIZE;
1995 } else if (mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE ||
1996 nxlen > txq->inlen_send) {
1997 return mlx5_tx_packet_multi_send(txq, loc, olx);
2001 if (mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE)
2004 * Now we know the minimal amount of data is requested
2005 * to inline. Check whether we should inline the buffers
2006 * from the chain beginning to eliminate some mbufs.
2008 if (unlikely(nxlen <= txq->inlen_send)) {
2009 /* We can inline first mbuf at least. */
2010 if (nxlen < inlen) {
2013 /* Scan mbufs till inlen filled. */
2018 nxlen = rte_pktmbuf_data_len(mbuf);
2020 } while (unlikely(nxlen < inlen));
2021 if (unlikely(nxlen > txq->inlen_send)) {
2022 /* We cannot inline entire mbuf. */
2023 smlen = inlen - smlen;
2024 start = rte_pktmbuf_mtod_offset
2025 (mbuf, uintptr_t, smlen);
2033 /* There should be not end of packet. */
2035 if (mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE)
2037 nxlen = inlen + rte_pktmbuf_data_len(mbuf);
2038 } while (unlikely(nxlen < txq->inlen_send));
2040 start = rte_pktmbuf_mtod(mbuf, uintptr_t);
2042 * Check whether we can do inline to align start
2043 * address of data buffer to cacheline.
2046 start = (~start + 1) & (RTE_CACHE_LINE_SIZE - 1);
2047 if (unlikely(start)) {
2049 if (start <= txq->inlen_send)
2054 * Check whether there are enough free WQEBBs:
2056 * - Ethernet Segment
2057 * - First Segment of inlined Ethernet data
2058 * - ... data continued ...
2059 * - Data Segments of pointer/min inline type
2061 * Estimate the number of Data Segments conservatively,
2062 * supposing no any mbufs is being freed during inlining.
2065 MLX5_ASSERT(inlen <= txq->inlen_send);
2066 ds = NB_SEGS(loc->mbuf) + 2 + (inlen -
2067 MLX5_ESEG_MIN_INLINE_SIZE +
2069 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
2070 if (unlikely(loc->wqe_free < ((ds + 3) / 4)))
2071 return MLX5_TXCMP_CODE_EXIT;
2072 /* Check for maximal WQE size. */
2073 if (unlikely((MLX5_WQE_SIZE_MAX / MLX5_WSEG_SIZE) < ds))
2074 return MLX5_TXCMP_CODE_ERROR;
2075 #ifdef MLX5_PMD_SOFT_COUNTERS
2076 /* Update sent data bytes/packets counters. */
2077 txq->stats.obytes += dlen + vlan;
2079 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
2080 loc->wqe_last = wqe;
2081 mlx5_tx_cseg_init(txq, loc, wqe, 0, MLX5_OPCODE_SEND, olx);
2082 ds = mlx5_tx_mseg_build(txq, loc, wqe, vlan, inlen, 0, olx);
2083 wqe->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
2084 txq->wqe_ci += (ds + 3) / 4;
2085 loc->wqe_free -= (ds + 3) / 4;
2086 return MLX5_TXCMP_CODE_MULTI;
2090 * Tx burst function for multi-segment packets. Supports all
2091 * types of Tx offloads, uses MLX5_OPCODE_SEND/TSO to build WQEs,
2092 * sends one packet per WQE. Function stops sending if it
2093 * encounters the single-segment packet.
2095 * This routine is responsible for storing processed mbuf
2096 * into elts ring buffer and update elts_head.
2099 * Pointer to TX queue structure.
2101 * Packets to transmit.
2103 * Number of packets in array.
2105 * Pointer to burst routine local context.
2107 * Configured Tx offloads mask. It is fully defined at
2108 * compile time and may be used for optimization.
2111 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
2112 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
2113 * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
2114 * MLX5_TXCMP_CODE_TSO - TSO single-segment packet encountered.
2115 * Local context variables updated.
2117 static __rte_always_inline enum mlx5_txcmp_code
2118 mlx5_tx_burst_mseg(struct mlx5_txq_data *__rte_restrict txq,
2119 struct rte_mbuf **__rte_restrict pkts,
2120 unsigned int pkts_n,
2121 struct mlx5_txq_local *__rte_restrict loc,
2124 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
2125 MLX5_ASSERT(pkts_n > loc->pkts_sent);
2126 pkts += loc->pkts_sent + 1;
2127 pkts_n -= loc->pkts_sent;
2129 enum mlx5_txcmp_code ret;
2131 MLX5_ASSERT(NB_SEGS(loc->mbuf) > 1);
2133 * Estimate the number of free elts quickly but conservatively.
2134 * Some segment may be fully inlined and freed,
2135 * ignore this here - precise estimation is costly.
2137 if (loc->elts_free < NB_SEGS(loc->mbuf))
2138 return MLX5_TXCMP_CODE_EXIT;
2139 if (MLX5_TXOFF_CONFIG(TSO) &&
2140 unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG)) {
2141 /* Proceed with multi-segment TSO. */
2142 ret = mlx5_tx_packet_multi_tso(txq, loc, olx);
2143 } else if (MLX5_TXOFF_CONFIG(INLINE)) {
2144 /* Proceed with multi-segment SEND with inlining. */
2145 ret = mlx5_tx_packet_multi_inline(txq, loc, olx);
2147 /* Proceed with multi-segment SEND w/o inlining. */
2148 ret = mlx5_tx_packet_multi_send(txq, loc, olx);
2150 if (ret == MLX5_TXCMP_CODE_EXIT)
2151 return MLX5_TXCMP_CODE_EXIT;
2152 if (ret == MLX5_TXCMP_CODE_ERROR)
2153 return MLX5_TXCMP_CODE_ERROR;
2154 /* WQE is built, go to the next packet. */
2157 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
2158 return MLX5_TXCMP_CODE_EXIT;
2159 loc->mbuf = *pkts++;
2161 rte_prefetch0(*pkts);
2162 if (likely(NB_SEGS(loc->mbuf) > 1))
2164 /* Here ends the series of multi-segment packets. */
2165 if (MLX5_TXOFF_CONFIG(TSO) &&
2166 unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG))
2167 return MLX5_TXCMP_CODE_TSO;
2168 return MLX5_TXCMP_CODE_SINGLE;
2174 * Tx burst function for single-segment packets with TSO.
2175 * Supports all types of Tx offloads, except multi-packets.
2176 * Uses MLX5_OPCODE_TSO to build WQEs, sends one packet per WQE.
2177 * Function stops sending if it encounters the multi-segment
2178 * packet or packet without TSO requested.
2180 * The routine is responsible for storing processed mbuf into elts ring buffer
2181 * and update elts_head if inline offloads is requested due to possible early
2182 * freeing of the inlined mbufs (can not store pkts array in elts as a batch).
2185 * Pointer to TX queue structure.
2187 * Packets to transmit.
2189 * Number of packets in array.
2191 * Pointer to burst routine local context.
2193 * Configured Tx offloads mask. It is fully defined at
2194 * compile time and may be used for optimization.
2197 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
2198 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
2199 * MLX5_TXCMP_CODE_SINGLE - single-segment packet encountered.
2200 * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
2201 * Local context variables updated.
2203 static __rte_always_inline enum mlx5_txcmp_code
2204 mlx5_tx_burst_tso(struct mlx5_txq_data *__rte_restrict txq,
2205 struct rte_mbuf **__rte_restrict pkts,
2206 unsigned int pkts_n,
2207 struct mlx5_txq_local *__rte_restrict loc,
2210 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
2211 MLX5_ASSERT(pkts_n > loc->pkts_sent);
2212 pkts += loc->pkts_sent + 1;
2213 pkts_n -= loc->pkts_sent;
2215 struct mlx5_wqe_dseg *__rte_restrict dseg;
2216 struct mlx5_wqe *__rte_restrict wqe;
2217 unsigned int ds, dlen, hlen, ntcp, vlan = 0;
2220 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
2221 if (MLX5_TXOFF_CONFIG(TXPP)) {
2222 enum mlx5_txcmp_code wret;
2224 /* Generate WAIT for scheduling if requested. */
2225 wret = mlx5_tx_schedule_send(txq, loc, olx);
2226 if (wret == MLX5_TXCMP_CODE_EXIT)
2227 return MLX5_TXCMP_CODE_EXIT;
2228 if (wret == MLX5_TXCMP_CODE_ERROR)
2229 return MLX5_TXCMP_CODE_ERROR;
2231 dlen = rte_pktmbuf_data_len(loc->mbuf);
2232 if (MLX5_TXOFF_CONFIG(VLAN) &&
2233 loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
2234 vlan = sizeof(struct rte_vlan_hdr);
2237 * First calculate the WQE size to check
2238 * whether we have enough space in ring buffer.
2240 hlen = loc->mbuf->l2_len + vlan +
2241 loc->mbuf->l3_len + loc->mbuf->l4_len;
2242 if (unlikely((!hlen || !loc->mbuf->tso_segsz)))
2243 return MLX5_TXCMP_CODE_ERROR;
2244 if (loc->mbuf->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK)
2245 hlen += loc->mbuf->outer_l2_len +
2246 loc->mbuf->outer_l3_len;
2247 /* Segment must contain all TSO headers. */
2248 if (unlikely(hlen > MLX5_MAX_TSO_HEADER ||
2249 hlen <= MLX5_ESEG_MIN_INLINE_SIZE ||
2250 hlen > (dlen + vlan)))
2251 return MLX5_TXCMP_CODE_ERROR;
2253 * Check whether there are enough free WQEBBs:
2255 * - Ethernet Segment
2256 * - First Segment of inlined Ethernet data
2257 * - ... data continued ...
2258 * - Finishing Data Segment of pointer type
2260 ds = 4 + (hlen - MLX5_ESEG_MIN_INLINE_SIZE +
2261 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
2262 if (loc->wqe_free < ((ds + 3) / 4))
2263 return MLX5_TXCMP_CODE_EXIT;
2264 #ifdef MLX5_PMD_SOFT_COUNTERS
2265 /* Update sent data bytes/packets counters. */
2266 ntcp = (dlen + vlan - hlen +
2267 loc->mbuf->tso_segsz - 1) /
2268 loc->mbuf->tso_segsz;
2270 * One will be added for mbuf itself at the end
2271 * of the mlx5_tx_burst from loc->pkts_sent field.
2274 txq->stats.opackets += ntcp;
2275 txq->stats.obytes += dlen + vlan + ntcp * hlen;
2278 * Build the TSO WQE:
2280 * - Ethernet Segment with hlen bytes inlined
2281 * - Data Segment of pointer type
2283 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
2284 loc->wqe_last = wqe;
2285 mlx5_tx_cseg_init(txq, loc, wqe, ds,
2286 MLX5_OPCODE_TSO, olx);
2287 dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan, hlen, 1, olx);
2288 dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) + hlen - vlan;
2289 dlen -= hlen - vlan;
2290 mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
2292 * WQE is built, update the loop parameters
2293 * and go to the next packet.
2295 txq->wqe_ci += (ds + 3) / 4;
2296 loc->wqe_free -= (ds + 3) / 4;
2297 if (MLX5_TXOFF_CONFIG(INLINE))
2298 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
2302 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
2303 return MLX5_TXCMP_CODE_EXIT;
2304 loc->mbuf = *pkts++;
2306 rte_prefetch0(*pkts);
2307 if (MLX5_TXOFF_CONFIG(MULTI) &&
2308 unlikely(NB_SEGS(loc->mbuf) > 1))
2309 return MLX5_TXCMP_CODE_MULTI;
2310 if (likely(!(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG)))
2311 return MLX5_TXCMP_CODE_SINGLE;
2312 /* Continue with the next TSO packet. */
2318 * Analyze the packet and select the best method to send.
2321 * Pointer to TX queue structure.
2323 * Pointer to burst routine local context.
2325 * Configured Tx offloads mask. It is fully defined at
2326 * compile time and may be used for optimization.
2328 * The predefined flag whether do complete check for
2329 * multi-segment packets and TSO.
2332 * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
2333 * MLX5_TXCMP_CODE_TSO - TSO required, use TSO/LSO.
2334 * MLX5_TXCMP_CODE_SINGLE - single-segment packet, use SEND.
2335 * MLX5_TXCMP_CODE_EMPW - single-segment packet, use MPW.
2337 static __rte_always_inline enum mlx5_txcmp_code
2338 mlx5_tx_able_to_empw(struct mlx5_txq_data *__rte_restrict txq,
2339 struct mlx5_txq_local *__rte_restrict loc,
2343 /* Check for multi-segment packet. */
2345 MLX5_TXOFF_CONFIG(MULTI) &&
2346 unlikely(NB_SEGS(loc->mbuf) > 1))
2347 return MLX5_TXCMP_CODE_MULTI;
2348 /* Check for TSO packet. */
2350 MLX5_TXOFF_CONFIG(TSO) &&
2351 unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG))
2352 return MLX5_TXCMP_CODE_TSO;
2353 /* Check if eMPW is enabled at all. */
2354 if (!MLX5_TXOFF_CONFIG(EMPW))
2355 return MLX5_TXCMP_CODE_SINGLE;
2356 /* Check if eMPW can be engaged. */
2357 if (MLX5_TXOFF_CONFIG(VLAN) &&
2358 unlikely(loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) &&
2359 (!MLX5_TXOFF_CONFIG(INLINE) ||
2360 unlikely((rte_pktmbuf_data_len(loc->mbuf) +
2361 sizeof(struct rte_vlan_hdr)) > txq->inlen_empw))) {
2363 * eMPW does not support VLAN insertion offload, we have to
2364 * inline the entire packet but packet is too long for inlining.
2366 return MLX5_TXCMP_CODE_SINGLE;
2368 return MLX5_TXCMP_CODE_EMPW;
2372 * Check the next packet attributes to match with the eMPW batch ones.
2373 * In addition, for legacy MPW the packet length is checked either.
2376 * Pointer to TX queue structure.
2378 * Pointer to Ethernet Segment of eMPW batch.
2380 * Pointer to burst routine local context.
2382 * Length of previous packet in MPW descriptor.
2384 * Configured Tx offloads mask. It is fully defined at
2385 * compile time and may be used for optimization.
2388 * true - packet match with eMPW batch attributes.
2389 * false - no match, eMPW should be restarted.
2391 static __rte_always_inline bool
2392 mlx5_tx_match_empw(struct mlx5_txq_data *__rte_restrict txq,
2393 struct mlx5_wqe_eseg *__rte_restrict es,
2394 struct mlx5_txq_local *__rte_restrict loc,
2398 uint8_t swp_flags = 0;
2400 /* Compare the checksum flags, if any. */
2401 if (MLX5_TXOFF_CONFIG(CSUM) &&
2402 txq_ol_cksum_to_cs(loc->mbuf) != es->cs_flags)
2404 /* Compare the Software Parser offsets and flags. */
2405 if (MLX5_TXOFF_CONFIG(SWP) &&
2406 (es->swp_offs != txq_mbuf_to_swp(loc, &swp_flags, olx) ||
2407 es->swp_flags != swp_flags))
2409 /* Fill metadata field if needed. */
2410 if (MLX5_TXOFF_CONFIG(METADATA) &&
2411 es->metadata != (loc->mbuf->ol_flags & RTE_MBUF_DYNFLAG_TX_METADATA ?
2412 rte_cpu_to_be_32(*RTE_FLOW_DYNF_METADATA(loc->mbuf)) : 0))
2414 /* Legacy MPW can send packets with the same length only. */
2415 if (MLX5_TXOFF_CONFIG(MPW) &&
2416 dlen != rte_pktmbuf_data_len(loc->mbuf))
2418 /* There must be no VLAN packets in eMPW loop. */
2419 if (MLX5_TXOFF_CONFIG(VLAN))
2420 MLX5_ASSERT(!(loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN));
2421 /* Check if the scheduling is requested. */
2422 if (MLX5_TXOFF_CONFIG(TXPP) &&
2423 loc->mbuf->ol_flags & txq->ts_mask)
2429 * Update send loop variables and WQE for eMPW loop without data inlining.
2430 * Number of Data Segments is equal to the number of sent packets.
2433 * Pointer to TX queue structure.
2435 * Pointer to burst routine local context.
2437 * Number of packets/Data Segments/Packets.
2439 * Accumulated statistics, bytes sent.
2441 * Configured Tx offloads mask. It is fully defined at
2442 * compile time and may be used for optimization.
2445 * true - packet match with eMPW batch attributes.
2446 * false - no match, eMPW should be restarted.
2448 static __rte_always_inline void
2449 mlx5_tx_sdone_empw(struct mlx5_txq_data *__rte_restrict txq,
2450 struct mlx5_txq_local *__rte_restrict loc,
2453 unsigned int olx __rte_unused)
2455 MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
2456 #ifdef MLX5_PMD_SOFT_COUNTERS
2457 /* Update sent data bytes counter. */
2458 txq->stats.obytes += slen;
2462 loc->elts_free -= ds;
2463 loc->pkts_sent += ds;
2465 loc->wqe_last->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | ds);
2466 txq->wqe_ci += (ds + 3) / 4;
2467 loc->wqe_free -= (ds + 3) / 4;
2471 * Update send loop variables and WQE for eMPW loop with data inlining.
2472 * Gets the size of pushed descriptors and data to the WQE.
2475 * Pointer to TX queue structure.
2477 * Pointer to burst routine local context.
2479 * Total size of descriptor/data in bytes.
2481 * Accumulated statistics, data bytes sent.
2483 * The base WQE for the eMPW/MPW descriptor.
2485 * Configured Tx offloads mask. It is fully defined at
2486 * compile time and may be used for optimization.
2489 * true - packet match with eMPW batch attributes.
2490 * false - no match, eMPW should be restarted.
2492 static __rte_always_inline void
2493 mlx5_tx_idone_empw(struct mlx5_txq_data *__rte_restrict txq,
2494 struct mlx5_txq_local *__rte_restrict loc,
2497 struct mlx5_wqe *__rte_restrict wqem,
2498 unsigned int olx __rte_unused)
2500 struct mlx5_wqe_dseg *dseg = &wqem->dseg[0];
2502 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
2503 #ifdef MLX5_PMD_SOFT_COUNTERS
2504 /* Update sent data bytes counter. */
2505 txq->stats.obytes += slen;
2509 if (MLX5_TXOFF_CONFIG(MPW) && dseg->bcount == RTE_BE32(0)) {
2511 * If the legacy MPW session contains the inline packets
2512 * we should set the only inline data segment length
2513 * and align the total length to the segment size.
2515 MLX5_ASSERT(len > sizeof(dseg->bcount));
2516 dseg->bcount = rte_cpu_to_be_32((len - sizeof(dseg->bcount)) |
2517 MLX5_ETH_WQE_DATA_INLINE);
2518 len = (len + MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE + 2;
2521 * The session is not legacy MPW or contains the
2522 * data buffer pointer segments.
2524 MLX5_ASSERT((len % MLX5_WSEG_SIZE) == 0);
2525 len = len / MLX5_WSEG_SIZE + 2;
2527 wqem->cseg.sq_ds = rte_cpu_to_be_32(txq->qp_num_8s | len);
2528 txq->wqe_ci += (len + 3) / 4;
2529 loc->wqe_free -= (len + 3) / 4;
2530 loc->wqe_last = wqem;
2534 * The set of Tx burst functions for single-segment packets without TSO
2535 * and with Multi-Packet Writing feature support.
2536 * Supports all types of Tx offloads, except multi-packets and TSO.
2538 * Uses MLX5_OPCODE_EMPW to build WQEs if possible and sends as many packet
2539 * per WQE as it can. If eMPW is not configured or packet can not be sent with
2540 * eMPW (VLAN insertion) the ordinary SEND opcode is used and only one packet
2543 * Functions stop sending if it encounters the multi-segment packet or packet
2544 * with TSO requested.
2546 * The routines are responsible for storing processed mbuf into elts ring buffer
2547 * and update elts_head if inlining offload is requested. Otherwise the copying
2548 * mbufs to elts can be postponed and completed at the end of burst routine.
2551 * Pointer to TX queue structure.
2553 * Packets to transmit.
2555 * Number of packets in array.
2557 * Pointer to burst routine local context.
2559 * Configured Tx offloads mask. It is fully defined at
2560 * compile time and may be used for optimization.
2563 * MLX5_TXCMP_CODE_EXIT - sending is done or impossible.
2564 * MLX5_TXCMP_CODE_ERROR - some unrecoverable error occurred.
2565 * MLX5_TXCMP_CODE_MULTI - multi-segment packet encountered.
2566 * MLX5_TXCMP_CODE_TSO - TSO packet encountered.
2567 * MLX5_TXCMP_CODE_SINGLE - used inside functions set.
2568 * MLX5_TXCMP_CODE_EMPW - used inside functions set.
2570 * Local context variables updated.
2573 * The routine sends packets with MLX5_OPCODE_EMPW
2574 * without inlining, this is dedicated optimized branch.
2575 * No VLAN insertion is supported.
2577 static __rte_always_inline enum mlx5_txcmp_code
2578 mlx5_tx_burst_empw_simple(struct mlx5_txq_data *__rte_restrict txq,
2579 struct rte_mbuf **__rte_restrict pkts,
2580 unsigned int pkts_n,
2581 struct mlx5_txq_local *__rte_restrict loc,
2585 * Subroutine is the part of mlx5_tx_burst_single() and sends
2586 * single-segment packet with eMPW opcode without data inlining.
2588 MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
2589 MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
2590 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
2591 MLX5_ASSERT(pkts_n > loc->pkts_sent);
2592 pkts += loc->pkts_sent + 1;
2593 pkts_n -= loc->pkts_sent;
2595 struct mlx5_wqe_dseg *__rte_restrict dseg;
2596 struct mlx5_wqe_eseg *__rte_restrict eseg;
2597 enum mlx5_txcmp_code ret;
2598 unsigned int part, loop;
2599 unsigned int slen = 0;
2602 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
2603 if (MLX5_TXOFF_CONFIG(TXPP)) {
2604 enum mlx5_txcmp_code wret;
2606 /* Generate WAIT for scheduling if requested. */
2607 wret = mlx5_tx_schedule_send(txq, loc, olx);
2608 if (wret == MLX5_TXCMP_CODE_EXIT)
2609 return MLX5_TXCMP_CODE_EXIT;
2610 if (wret == MLX5_TXCMP_CODE_ERROR)
2611 return MLX5_TXCMP_CODE_ERROR;
2613 part = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
2614 MLX5_MPW_MAX_PACKETS :
2615 MLX5_EMPW_MAX_PACKETS);
2616 if (unlikely(loc->elts_free < part)) {
2617 /* We have no enough elts to save all mbufs. */
2618 if (unlikely(loc->elts_free < MLX5_EMPW_MIN_PACKETS))
2619 return MLX5_TXCMP_CODE_EXIT;
2620 /* But we still able to send at least minimal eMPW. */
2621 part = loc->elts_free;
2623 /* Check whether we have enough WQEs */
2624 if (unlikely(loc->wqe_free < ((2 + part + 3) / 4))) {
2625 if (unlikely(loc->wqe_free <
2626 ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
2627 return MLX5_TXCMP_CODE_EXIT;
2628 part = (loc->wqe_free * 4) - 2;
2630 if (likely(part > 1))
2631 rte_prefetch0(*pkts);
2632 loc->wqe_last = txq->wqes + (txq->wqe_ci & txq->wqe_m);
2634 * Build eMPW title WQEBB:
2635 * - Control Segment, eMPW opcode
2636 * - Ethernet Segment, no inline
2638 mlx5_tx_cseg_init(txq, loc, loc->wqe_last, part + 2,
2639 MLX5_OPCODE_ENHANCED_MPSW, olx);
2640 mlx5_tx_eseg_none(txq, loc, loc->wqe_last,
2641 olx & ~MLX5_TXOFF_CONFIG_VLAN);
2642 eseg = &loc->wqe_last->eseg;
2643 dseg = &loc->wqe_last->dseg[0];
2645 /* Store the packet length for legacy MPW. */
2646 if (MLX5_TXOFF_CONFIG(MPW))
2647 eseg->mss = rte_cpu_to_be_16
2648 (rte_pktmbuf_data_len(loc->mbuf));
2650 uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
2651 #ifdef MLX5_PMD_SOFT_COUNTERS
2652 /* Update sent data bytes counter. */
2657 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
2659 if (unlikely(--loop == 0))
2661 loc->mbuf = *pkts++;
2662 if (likely(loop > 1))
2663 rte_prefetch0(*pkts);
2664 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
2666 * Unroll the completion code to avoid
2667 * returning variable value - it results in
2668 * unoptimized sequent checking in caller.
2670 if (ret == MLX5_TXCMP_CODE_MULTI) {
2672 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
2673 if (unlikely(!loc->elts_free ||
2675 return MLX5_TXCMP_CODE_EXIT;
2676 return MLX5_TXCMP_CODE_MULTI;
2678 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
2679 if (ret == MLX5_TXCMP_CODE_TSO) {
2681 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
2682 if (unlikely(!loc->elts_free ||
2684 return MLX5_TXCMP_CODE_EXIT;
2685 return MLX5_TXCMP_CODE_TSO;
2687 if (ret == MLX5_TXCMP_CODE_SINGLE) {
2689 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
2690 if (unlikely(!loc->elts_free ||
2692 return MLX5_TXCMP_CODE_EXIT;
2693 return MLX5_TXCMP_CODE_SINGLE;
2695 if (ret != MLX5_TXCMP_CODE_EMPW) {
2698 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
2699 return MLX5_TXCMP_CODE_ERROR;
2702 * Check whether packet parameters coincide
2703 * within assumed eMPW batch:
2704 * - check sum settings
2706 * - software parser settings
2707 * - packets length (legacy MPW only)
2708 * - scheduling is not required
2710 if (!mlx5_tx_match_empw(txq, eseg, loc, dlen, olx)) {
2713 mlx5_tx_sdone_empw(txq, loc, part, slen, olx);
2714 if (unlikely(!loc->elts_free ||
2716 return MLX5_TXCMP_CODE_EXIT;
2720 /* Packet attributes match, continue the same eMPW. */
2722 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
2723 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
2725 /* eMPW is built successfully, update loop parameters. */
2727 MLX5_ASSERT(pkts_n >= part);
2728 #ifdef MLX5_PMD_SOFT_COUNTERS
2729 /* Update sent data bytes counter. */
2730 txq->stats.obytes += slen;
2732 loc->elts_free -= part;
2733 loc->pkts_sent += part;
2734 txq->wqe_ci += (2 + part + 3) / 4;
2735 loc->wqe_free -= (2 + part + 3) / 4;
2737 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
2738 return MLX5_TXCMP_CODE_EXIT;
2739 loc->mbuf = *pkts++;
2740 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
2741 if (unlikely(ret != MLX5_TXCMP_CODE_EMPW))
2743 /* Continue sending eMPW batches. */
2749 * The routine sends packets with MLX5_OPCODE_EMPW
2750 * with inlining, optionally supports VLAN insertion.
2752 static __rte_always_inline enum mlx5_txcmp_code
2753 mlx5_tx_burst_empw_inline(struct mlx5_txq_data *__rte_restrict txq,
2754 struct rte_mbuf **__rte_restrict pkts,
2755 unsigned int pkts_n,
2756 struct mlx5_txq_local *__rte_restrict loc,
2760 * Subroutine is the part of mlx5_tx_burst_single() and sends
2761 * single-segment packet with eMPW opcode with data inlining.
2763 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
2764 MLX5_ASSERT(MLX5_TXOFF_CONFIG(EMPW));
2765 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
2766 MLX5_ASSERT(pkts_n > loc->pkts_sent);
2767 pkts += loc->pkts_sent + 1;
2768 pkts_n -= loc->pkts_sent;
2770 struct mlx5_wqe_dseg *__rte_restrict dseg;
2771 struct mlx5_wqe *__rte_restrict wqem;
2772 enum mlx5_txcmp_code ret;
2773 unsigned int room, part, nlim;
2774 unsigned int slen = 0;
2776 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
2777 if (MLX5_TXOFF_CONFIG(TXPP)) {
2778 enum mlx5_txcmp_code wret;
2780 /* Generate WAIT for scheduling if requested. */
2781 wret = mlx5_tx_schedule_send(txq, loc, olx);
2782 if (wret == MLX5_TXCMP_CODE_EXIT)
2783 return MLX5_TXCMP_CODE_EXIT;
2784 if (wret == MLX5_TXCMP_CODE_ERROR)
2785 return MLX5_TXCMP_CODE_ERROR;
2788 * Limits the amount of packets in one WQE
2789 * to improve CQE latency generation.
2791 nlim = RTE_MIN(pkts_n, MLX5_TXOFF_CONFIG(MPW) ?
2792 MLX5_MPW_INLINE_MAX_PACKETS :
2793 MLX5_EMPW_MAX_PACKETS);
2794 /* Check whether we have minimal amount WQEs */
2795 if (unlikely(loc->wqe_free <
2796 ((2 + MLX5_EMPW_MIN_PACKETS + 3) / 4)))
2797 return MLX5_TXCMP_CODE_EXIT;
2798 if (likely(pkts_n > 1))
2799 rte_prefetch0(*pkts);
2800 wqem = txq->wqes + (txq->wqe_ci & txq->wqe_m);
2802 * Build eMPW title WQEBB:
2803 * - Control Segment, eMPW opcode, zero DS
2804 * - Ethernet Segment, no inline
2806 mlx5_tx_cseg_init(txq, loc, wqem, 0,
2807 MLX5_OPCODE_ENHANCED_MPSW, olx);
2808 mlx5_tx_eseg_none(txq, loc, wqem,
2809 olx & ~MLX5_TXOFF_CONFIG_VLAN);
2810 dseg = &wqem->dseg[0];
2811 /* Store the packet length for legacy MPW. */
2812 if (MLX5_TXOFF_CONFIG(MPW))
2813 wqem->eseg.mss = rte_cpu_to_be_16
2814 (rte_pktmbuf_data_len(loc->mbuf));
2815 room = RTE_MIN(MLX5_WQE_SIZE_MAX / MLX5_WQE_SIZE,
2816 loc->wqe_free) * MLX5_WQE_SIZE -
2817 MLX5_WQE_CSEG_SIZE -
2819 /* Limit the room for legacy MPW sessions for performance. */
2820 if (MLX5_TXOFF_CONFIG(MPW))
2821 room = RTE_MIN(room,
2822 RTE_MAX(txq->inlen_empw +
2823 sizeof(dseg->bcount) +
2824 (MLX5_TXOFF_CONFIG(VLAN) ?
2825 sizeof(struct rte_vlan_hdr) : 0),
2826 MLX5_MPW_INLINE_MAX_PACKETS *
2827 MLX5_WQE_DSEG_SIZE));
2828 /* Build WQE till we have space, packets and resources. */
2831 uint32_t dlen = rte_pktmbuf_data_len(loc->mbuf);
2832 uint8_t *dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *);
2835 MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
2836 MLX5_ASSERT((room % MLX5_WQE_DSEG_SIZE) == 0);
2837 MLX5_ASSERT((uintptr_t)dseg < (uintptr_t)txq->wqes_end);
2839 * Some Tx offloads may cause an error if packet is not
2840 * long enough, check against assumed minimal length.
2842 if (unlikely(dlen <= MLX5_ESEG_MIN_INLINE_SIZE)) {
2844 if (unlikely(!part))
2845 return MLX5_TXCMP_CODE_ERROR;
2847 * We have some successfully built
2848 * packet Data Segments to send.
2850 mlx5_tx_idone_empw(txq, loc, part,
2852 return MLX5_TXCMP_CODE_ERROR;
2854 /* Inline or not inline - that's the Question. */
2855 if (dlen > txq->inlen_empw ||
2856 loc->mbuf->ol_flags & RTE_MBUF_F_TX_DYNF_NOINLINE)
2858 if (MLX5_TXOFF_CONFIG(MPW)) {
2859 if (dlen > txq->inlen_send)
2863 /* Open new inline MPW session. */
2864 tlen += sizeof(dseg->bcount);
2865 dseg->bcount = RTE_BE32(0);
2867 (dseg, sizeof(dseg->bcount));
2870 * No pointer and inline descriptor
2871 * intermix for legacy MPW sessions.
2873 if (wqem->dseg[0].bcount)
2877 tlen = sizeof(dseg->bcount) + dlen;
2879 /* Inline entire packet, optional VLAN insertion. */
2880 if (MLX5_TXOFF_CONFIG(VLAN) &&
2881 loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
2883 * The packet length must be checked in
2884 * mlx5_tx_able_to_empw() and packet
2885 * fits into inline length guaranteed.
2888 sizeof(struct rte_vlan_hdr)) <=
2890 tlen += sizeof(struct rte_vlan_hdr);
2893 dseg = mlx5_tx_dseg_vlan(txq, loc, dseg,
2895 #ifdef MLX5_PMD_SOFT_COUNTERS
2896 /* Update sent data bytes counter. */
2897 slen += sizeof(struct rte_vlan_hdr);
2902 dseg = mlx5_tx_dseg_empw(txq, loc, dseg,
2905 if (!MLX5_TXOFF_CONFIG(MPW))
2906 tlen = RTE_ALIGN(tlen, MLX5_WSEG_SIZE);
2907 MLX5_ASSERT(room >= tlen);
2910 * Packet data are completely inline,
2911 * we can try to free the packet.
2913 if (likely(loc->pkts_sent == loc->mbuf_free)) {
2915 * All the packets from the burst beginning
2916 * are inline, we can free mbufs directly
2917 * from the origin array on tx_burst exit().
2923 * In order no to call rte_pktmbuf_free_seg() here,
2924 * in the most inner loop (that might be very
2925 * expensive) we just save the mbuf in elts.
2927 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
2932 * No pointer and inline descriptor
2933 * intermix for legacy MPW sessions.
2935 if (MLX5_TXOFF_CONFIG(MPW) &&
2937 wqem->dseg[0].bcount == RTE_BE32(0))
2940 * Not inlinable VLAN packets are
2941 * proceeded outside of this routine.
2943 MLX5_ASSERT(room >= MLX5_WQE_DSEG_SIZE);
2944 if (MLX5_TXOFF_CONFIG(VLAN))
2945 MLX5_ASSERT(!(loc->mbuf->ol_flags &
2946 RTE_MBUF_F_TX_VLAN));
2947 mlx5_tx_dseg_ptr(txq, loc, dseg, dptr, dlen, olx);
2948 /* We have to store mbuf in elts.*/
2949 txq->elts[txq->elts_head++ & txq->elts_m] = loc->mbuf;
2951 room -= MLX5_WQE_DSEG_SIZE;
2952 /* Ring buffer wraparound is checked at the loop end.*/
2955 #ifdef MLX5_PMD_SOFT_COUNTERS
2956 /* Update sent data bytes counter. */
2961 if (unlikely(!pkts_n || !loc->elts_free)) {
2963 * We have no resources/packets to
2964 * continue build descriptors.
2967 mlx5_tx_idone_empw(txq, loc, part,
2969 return MLX5_TXCMP_CODE_EXIT;
2971 loc->mbuf = *pkts++;
2972 if (likely(pkts_n > 1))
2973 rte_prefetch0(*pkts);
2974 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
2976 * Unroll the completion code to avoid
2977 * returning variable value - it results in
2978 * unoptimized sequent checking in caller.
2980 if (ret == MLX5_TXCMP_CODE_MULTI) {
2982 mlx5_tx_idone_empw(txq, loc, part,
2984 if (unlikely(!loc->elts_free ||
2986 return MLX5_TXCMP_CODE_EXIT;
2987 return MLX5_TXCMP_CODE_MULTI;
2989 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
2990 if (ret == MLX5_TXCMP_CODE_TSO) {
2992 mlx5_tx_idone_empw(txq, loc, part,
2994 if (unlikely(!loc->elts_free ||
2996 return MLX5_TXCMP_CODE_EXIT;
2997 return MLX5_TXCMP_CODE_TSO;
2999 if (ret == MLX5_TXCMP_CODE_SINGLE) {
3001 mlx5_tx_idone_empw(txq, loc, part,
3003 if (unlikely(!loc->elts_free ||
3005 return MLX5_TXCMP_CODE_EXIT;
3006 return MLX5_TXCMP_CODE_SINGLE;
3008 if (ret != MLX5_TXCMP_CODE_EMPW) {
3011 mlx5_tx_idone_empw(txq, loc, part,
3013 return MLX5_TXCMP_CODE_ERROR;
3015 /* Check if we have minimal room left. */
3017 if (unlikely(!nlim || room < MLX5_WQE_DSEG_SIZE))
3020 * Check whether packet parameters coincide
3021 * within assumed eMPW batch:
3022 * - check sum settings
3024 * - software parser settings
3025 * - packets length (legacy MPW only)
3026 * - scheduling is not required
3028 if (!mlx5_tx_match_empw(txq, &wqem->eseg,
3031 /* Packet attributes match, continue the same eMPW. */
3032 if ((uintptr_t)dseg >= (uintptr_t)txq->wqes_end)
3033 dseg = (struct mlx5_wqe_dseg *)txq->wqes;
3036 * We get here to close an existing eMPW
3037 * session and start the new one.
3039 MLX5_ASSERT(pkts_n);
3041 if (unlikely(!part))
3042 return MLX5_TXCMP_CODE_EXIT;
3043 mlx5_tx_idone_empw(txq, loc, part, slen, wqem, olx);
3044 if (unlikely(!loc->elts_free ||
3046 return MLX5_TXCMP_CODE_EXIT;
3047 /* Continue the loop with new eMPW session. */
3053 * The routine sends packets with ordinary MLX5_OPCODE_SEND.
3054 * Data inlining and VLAN insertion are supported.
3056 static __rte_always_inline enum mlx5_txcmp_code
3057 mlx5_tx_burst_single_send(struct mlx5_txq_data *__rte_restrict txq,
3058 struct rte_mbuf **__rte_restrict pkts,
3059 unsigned int pkts_n,
3060 struct mlx5_txq_local *__rte_restrict loc,
3064 * Subroutine is the part of mlx5_tx_burst_single()
3065 * and sends single-segment packet with SEND opcode.
3067 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
3068 MLX5_ASSERT(pkts_n > loc->pkts_sent);
3069 pkts += loc->pkts_sent + 1;
3070 pkts_n -= loc->pkts_sent;
3072 struct mlx5_wqe *__rte_restrict wqe;
3073 enum mlx5_txcmp_code ret;
3075 MLX5_ASSERT(NB_SEGS(loc->mbuf) == 1);
3076 if (MLX5_TXOFF_CONFIG(TXPP)) {
3077 enum mlx5_txcmp_code wret;
3079 /* Generate WAIT for scheduling if requested. */
3080 wret = mlx5_tx_schedule_send(txq, loc, olx);
3081 if (wret == MLX5_TXCMP_CODE_EXIT)
3082 return MLX5_TXCMP_CODE_EXIT;
3083 if (wret == MLX5_TXCMP_CODE_ERROR)
3084 return MLX5_TXCMP_CODE_ERROR;
3086 if (MLX5_TXOFF_CONFIG(INLINE)) {
3087 unsigned int inlen, vlan = 0;
3089 inlen = rte_pktmbuf_data_len(loc->mbuf);
3090 if (MLX5_TXOFF_CONFIG(VLAN) &&
3091 loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
3092 vlan = sizeof(struct rte_vlan_hdr);
3096 * If inlining is enabled at configuration time
3097 * the limit must be not less than minimal size.
3098 * Otherwise we would do extra check for data
3099 * size to avoid crashes due to length overflow.
3101 MLX5_ASSERT(txq->inlen_send >=
3102 MLX5_ESEG_MIN_INLINE_SIZE);
3103 if (inlen <= txq->inlen_send) {
3104 unsigned int seg_n, wqe_n;
3106 rte_prefetch0(rte_pktmbuf_mtod
3107 (loc->mbuf, uint8_t *));
3108 /* Check against minimal length. */
3109 if (inlen <= MLX5_ESEG_MIN_INLINE_SIZE)
3110 return MLX5_TXCMP_CODE_ERROR;
3111 if (loc->mbuf->ol_flags &
3112 RTE_MBUF_F_TX_DYNF_NOINLINE) {
3114 * The hint flag not to inline packet
3115 * data is set. Check whether we can
3118 if ((!MLX5_TXOFF_CONFIG(EMPW) &&
3120 (MLX5_TXOFF_CONFIG(MPW) &&
3122 if (inlen <= txq->inlen_send)
3125 * The hardware requires the
3126 * minimal inline data header.
3128 goto single_min_inline;
3130 if (MLX5_TXOFF_CONFIG(VLAN) &&
3131 vlan && !txq->vlan_en) {
3133 * We must insert VLAN tag
3134 * by software means.
3136 goto single_part_inline;
3138 goto single_no_inline;
3142 * Completely inlined packet data WQE:
3143 * - Control Segment, SEND opcode
3144 * - Ethernet Segment, no VLAN insertion
3145 * - Data inlined, VLAN optionally inserted
3146 * - Alignment to MLX5_WSEG_SIZE
3147 * Have to estimate amount of WQEBBs
3149 seg_n = (inlen + 3 * MLX5_WSEG_SIZE -
3150 MLX5_ESEG_MIN_INLINE_SIZE +
3151 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
3152 /* Check if there are enough WQEBBs. */
3153 wqe_n = (seg_n + 3) / 4;
3154 if (wqe_n > loc->wqe_free)
3155 return MLX5_TXCMP_CODE_EXIT;
3156 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3157 loc->wqe_last = wqe;
3158 mlx5_tx_cseg_init(txq, loc, wqe, seg_n,
3159 MLX5_OPCODE_SEND, olx);
3160 mlx5_tx_eseg_data(txq, loc, wqe,
3161 vlan, inlen, 0, olx);
3162 txq->wqe_ci += wqe_n;
3163 loc->wqe_free -= wqe_n;
3165 * Packet data are completely inlined,
3166 * free the packet immediately.
3168 rte_pktmbuf_free_seg(loc->mbuf);
3169 } else if ((!MLX5_TXOFF_CONFIG(EMPW) ||
3170 MLX5_TXOFF_CONFIG(MPW)) &&
3173 * If minimal inlining is requested the eMPW
3174 * feature should be disabled due to data is
3175 * inlined into Ethernet Segment, which can
3176 * not contain inlined data for eMPW due to
3177 * segment shared for all packets.
3179 struct mlx5_wqe_dseg *__rte_restrict dseg;
3184 * The inline-mode settings require
3185 * to inline the specified amount of
3186 * data bytes to the Ethernet Segment.
3187 * We should check the free space in
3188 * WQE ring buffer to inline partially.
3191 MLX5_ASSERT(txq->inlen_send >= txq->inlen_mode);
3192 MLX5_ASSERT(inlen > txq->inlen_mode);
3193 MLX5_ASSERT(txq->inlen_mode >=
3194 MLX5_ESEG_MIN_INLINE_SIZE);
3196 * Check whether there are enough free WQEBBs:
3198 * - Ethernet Segment
3199 * - First Segment of inlined Ethernet data
3200 * - ... data continued ...
3201 * - Finishing Data Segment of pointer type
3203 ds = (MLX5_WQE_CSEG_SIZE +
3204 MLX5_WQE_ESEG_SIZE +
3205 MLX5_WQE_DSEG_SIZE +
3207 MLX5_ESEG_MIN_INLINE_SIZE +
3208 MLX5_WQE_DSEG_SIZE +
3209 MLX5_WSEG_SIZE - 1) / MLX5_WSEG_SIZE;
3210 if (loc->wqe_free < ((ds + 3) / 4))
3211 return MLX5_TXCMP_CODE_EXIT;
3213 * Build the ordinary SEND WQE:
3215 * - Ethernet Segment, inline inlen_mode bytes
3216 * - Data Segment of pointer type
3218 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3219 loc->wqe_last = wqe;
3220 mlx5_tx_cseg_init(txq, loc, wqe, ds,
3221 MLX5_OPCODE_SEND, olx);
3222 dseg = mlx5_tx_eseg_data(txq, loc, wqe, vlan,
3225 dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
3226 txq->inlen_mode - vlan;
3227 inlen -= txq->inlen_mode;
3228 mlx5_tx_dseg_ptr(txq, loc, dseg,
3231 * WQE is built, update the loop parameters
3232 * and got to the next packet.
3234 txq->wqe_ci += (ds + 3) / 4;
3235 loc->wqe_free -= (ds + 3) / 4;
3236 /* We have to store mbuf in elts.*/
3237 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
3238 txq->elts[txq->elts_head++ & txq->elts_m] =
3246 * Partially inlined packet data WQE, we have
3247 * some space in title WQEBB, we can fill it
3248 * with some packet data. It takes one WQEBB,
3249 * it is available, no extra space check:
3250 * - Control Segment, SEND opcode
3251 * - Ethernet Segment, no VLAN insertion
3252 * - MLX5_ESEG_MIN_INLINE_SIZE bytes of Data
3253 * - Data Segment, pointer type
3255 * We also get here if VLAN insertion is not
3256 * supported by HW, the inline is enabled.
3259 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3260 loc->wqe_last = wqe;
3261 mlx5_tx_cseg_init(txq, loc, wqe, 4,
3262 MLX5_OPCODE_SEND, olx);
3263 mlx5_tx_eseg_dmin(txq, loc, wqe, vlan, olx);
3264 dptr = rte_pktmbuf_mtod(loc->mbuf, uint8_t *) +
3265 MLX5_ESEG_MIN_INLINE_SIZE - vlan;
3267 * The length check is performed above, by
3268 * comparing with txq->inlen_send. We should
3269 * not get overflow here.
3271 MLX5_ASSERT(inlen > MLX5_ESEG_MIN_INLINE_SIZE);
3272 dlen = inlen - MLX5_ESEG_MIN_INLINE_SIZE;
3273 mlx5_tx_dseg_ptr(txq, loc, &wqe->dseg[1],
3277 /* We have to store mbuf in elts.*/
3278 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE));
3279 txq->elts[txq->elts_head++ & txq->elts_m] =
3283 #ifdef MLX5_PMD_SOFT_COUNTERS
3284 /* Update sent data bytes counter. */
3285 txq->stats.obytes += vlan +
3286 rte_pktmbuf_data_len(loc->mbuf);
3290 * No inline at all, it means the CPU cycles saving
3291 * is prioritized at configuration, we should not
3292 * copy any packet data to WQE.
3294 * SEND WQE, one WQEBB:
3295 * - Control Segment, SEND opcode
3296 * - Ethernet Segment, optional VLAN, no inline
3297 * - Data Segment, pointer type
3300 wqe = txq->wqes + (txq->wqe_ci & txq->wqe_m);
3301 loc->wqe_last = wqe;
3302 mlx5_tx_cseg_init(txq, loc, wqe, 3,
3303 MLX5_OPCODE_SEND, olx);
3304 mlx5_tx_eseg_none(txq, loc, wqe, olx);
3306 (txq, loc, &wqe->dseg[0],
3307 rte_pktmbuf_mtod(loc->mbuf, uint8_t *),
3308 rte_pktmbuf_data_len(loc->mbuf), olx);
3312 * We should not store mbuf pointer in elts
3313 * if no inlining is configured, this is done
3314 * by calling routine in a batch copy.
3316 MLX5_ASSERT(!MLX5_TXOFF_CONFIG(INLINE));
3318 #ifdef MLX5_PMD_SOFT_COUNTERS
3319 /* Update sent data bytes counter. */
3320 txq->stats.obytes += rte_pktmbuf_data_len(loc->mbuf);
3321 if (MLX5_TXOFF_CONFIG(VLAN) &&
3322 loc->mbuf->ol_flags & RTE_MBUF_F_TX_VLAN)
3323 txq->stats.obytes +=
3324 sizeof(struct rte_vlan_hdr);
3329 if (unlikely(!pkts_n || !loc->elts_free || !loc->wqe_free))
3330 return MLX5_TXCMP_CODE_EXIT;
3331 loc->mbuf = *pkts++;
3333 rte_prefetch0(*pkts);
3334 ret = mlx5_tx_able_to_empw(txq, loc, olx, true);
3335 if (unlikely(ret != MLX5_TXCMP_CODE_SINGLE))
3341 static __rte_always_inline enum mlx5_txcmp_code
3342 mlx5_tx_burst_single(struct mlx5_txq_data *__rte_restrict txq,
3343 struct rte_mbuf **__rte_restrict pkts,
3344 unsigned int pkts_n,
3345 struct mlx5_txq_local *__rte_restrict loc,
3348 enum mlx5_txcmp_code ret;
3350 ret = mlx5_tx_able_to_empw(txq, loc, olx, false);
3351 if (ret == MLX5_TXCMP_CODE_SINGLE)
3353 MLX5_ASSERT(ret == MLX5_TXCMP_CODE_EMPW);
3355 /* Optimize for inline/no inline eMPW send. */
3356 ret = (MLX5_TXOFF_CONFIG(INLINE)) ?
3357 mlx5_tx_burst_empw_inline
3358 (txq, pkts, pkts_n, loc, olx) :
3359 mlx5_tx_burst_empw_simple
3360 (txq, pkts, pkts_n, loc, olx);
3361 if (ret != MLX5_TXCMP_CODE_SINGLE)
3363 /* The resources to send one packet should remain. */
3364 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
3366 ret = mlx5_tx_burst_single_send(txq, pkts, pkts_n, loc, olx);
3367 MLX5_ASSERT(ret != MLX5_TXCMP_CODE_SINGLE);
3368 if (ret != MLX5_TXCMP_CODE_EMPW)
3370 /* The resources to send one packet should remain. */
3371 MLX5_ASSERT(loc->elts_free && loc->wqe_free);
3376 * DPDK Tx callback template. This is configured template used to generate
3377 * routines optimized for specified offload setup.
3378 * One of this generated functions is chosen at SQ configuration time.
3381 * Generic pointer to TX queue structure.
3383 * Packets to transmit.
3385 * Number of packets in array.
3387 * Configured offloads mask, presents the bits of MLX5_TXOFF_CONFIG_xxx
3388 * values. Should be static to take compile time static configuration
3392 * Number of packets successfully transmitted (<= pkts_n).
3394 static __rte_always_inline uint16_t
3395 mlx5_tx_burst_tmpl(struct mlx5_txq_data *__rte_restrict txq,
3396 struct rte_mbuf **__rte_restrict pkts,
3400 struct mlx5_txq_local loc;
3401 enum mlx5_txcmp_code ret;
3404 MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
3405 MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
3406 if (unlikely(!pkts_n))
3408 if (MLX5_TXOFF_CONFIG(INLINE))
3412 loc.wqe_last = NULL;
3415 loc.pkts_loop = loc.pkts_sent;
3417 * Check if there are some CQEs, if any:
3418 * - process an encountered errors
3419 * - process the completed WQEs
3420 * - free related mbufs
3421 * - doorbell the NIC about processed CQEs
3423 rte_prefetch0(*(pkts + loc.pkts_sent));
3424 mlx5_tx_handle_completion(txq, olx);
3426 * Calculate the number of available resources - elts and WQEs.
3427 * There are two possible different scenarios:
3428 * - no data inlining into WQEs, one WQEBB may contains up to
3429 * four packets, in this case elts become scarce resource
3430 * - data inlining into WQEs, one packet may require multiple
3431 * WQEBBs, the WQEs become the limiting factor.
3433 MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
3434 loc.elts_free = txq->elts_s -
3435 (uint16_t)(txq->elts_head - txq->elts_tail);
3436 MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
3437 loc.wqe_free = txq->wqe_s -
3438 (uint16_t)(txq->wqe_ci - txq->wqe_pi);
3439 if (unlikely(!loc.elts_free || !loc.wqe_free))
3443 * Fetch the packet from array. Usually this is the first
3444 * packet in series of multi/single segment packets.
3446 loc.mbuf = *(pkts + loc.pkts_sent);
3447 /* Dedicated branch for multi-segment packets. */
3448 if (MLX5_TXOFF_CONFIG(MULTI) &&
3449 unlikely(NB_SEGS(loc.mbuf) > 1)) {
3451 * Multi-segment packet encountered.
3452 * Hardware is able to process it only
3453 * with SEND/TSO opcodes, one packet
3454 * per WQE, do it in dedicated routine.
3457 MLX5_ASSERT(loc.pkts_sent >= loc.pkts_copy);
3458 part = loc.pkts_sent - loc.pkts_copy;
3459 if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
3461 * There are some single-segment mbufs not
3462 * stored in elts. The mbufs must be in the
3463 * same order as WQEs, so we must copy the
3464 * mbufs to elts here, before the coming
3465 * multi-segment packet mbufs is appended.
3467 mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy,
3469 loc.pkts_copy = loc.pkts_sent;
3471 MLX5_ASSERT(pkts_n > loc.pkts_sent);
3472 ret = mlx5_tx_burst_mseg(txq, pkts, pkts_n, &loc, olx);
3473 if (!MLX5_TXOFF_CONFIG(INLINE))
3474 loc.pkts_copy = loc.pkts_sent;
3476 * These returned code checks are supposed
3477 * to be optimized out due to routine inlining.
3479 if (ret == MLX5_TXCMP_CODE_EXIT) {
3481 * The routine returns this code when
3482 * all packets are sent or there is no
3483 * enough resources to complete request.
3487 if (ret == MLX5_TXCMP_CODE_ERROR) {
3489 * The routine returns this code when some error
3490 * in the incoming packets format occurred.
3492 txq->stats.oerrors++;
3495 if (ret == MLX5_TXCMP_CODE_SINGLE) {
3497 * The single-segment packet was encountered
3498 * in the array, try to send it with the
3499 * best optimized way, possible engaging eMPW.
3501 goto enter_send_single;
3503 if (MLX5_TXOFF_CONFIG(TSO) &&
3504 ret == MLX5_TXCMP_CODE_TSO) {
3506 * The single-segment TSO packet was
3507 * encountered in the array.
3509 goto enter_send_tso;
3511 /* We must not get here. Something is going wrong. */
3513 txq->stats.oerrors++;
3516 /* Dedicated branch for single-segment TSO packets. */
3517 if (MLX5_TXOFF_CONFIG(TSO) &&
3518 unlikely(loc.mbuf->ol_flags & RTE_MBUF_F_TX_TCP_SEG)) {
3520 * TSO might require special way for inlining
3521 * (dedicated parameters) and is sent with
3522 * MLX5_OPCODE_TSO opcode only, provide this
3523 * in dedicated branch.
3526 MLX5_ASSERT(NB_SEGS(loc.mbuf) == 1);
3527 MLX5_ASSERT(pkts_n > loc.pkts_sent);
3528 ret = mlx5_tx_burst_tso(txq, pkts, pkts_n, &loc, olx);
3530 * These returned code checks are supposed
3531 * to be optimized out due to routine inlining.
3533 if (ret == MLX5_TXCMP_CODE_EXIT)
3535 if (ret == MLX5_TXCMP_CODE_ERROR) {
3536 txq->stats.oerrors++;
3539 if (ret == MLX5_TXCMP_CODE_SINGLE)
3540 goto enter_send_single;
3541 if (MLX5_TXOFF_CONFIG(MULTI) &&
3542 ret == MLX5_TXCMP_CODE_MULTI) {
3544 * The multi-segment packet was
3545 * encountered in the array.
3547 goto enter_send_multi;
3549 /* We must not get here. Something is going wrong. */
3551 txq->stats.oerrors++;
3555 * The dedicated branch for the single-segment packets
3556 * without TSO. Often these ones can be sent using
3557 * MLX5_OPCODE_EMPW with multiple packets in one WQE.
3558 * The routine builds the WQEs till it encounters
3559 * the TSO or multi-segment packet (in case if these
3560 * offloads are requested at SQ configuration time).
3563 MLX5_ASSERT(pkts_n > loc.pkts_sent);
3564 ret = mlx5_tx_burst_single(txq, pkts, pkts_n, &loc, olx);
3566 * These returned code checks are supposed
3567 * to be optimized out due to routine inlining.
3569 if (ret == MLX5_TXCMP_CODE_EXIT)
3571 if (ret == MLX5_TXCMP_CODE_ERROR) {
3572 txq->stats.oerrors++;
3575 if (MLX5_TXOFF_CONFIG(MULTI) &&
3576 ret == MLX5_TXCMP_CODE_MULTI) {
3578 * The multi-segment packet was
3579 * encountered in the array.
3581 goto enter_send_multi;
3583 if (MLX5_TXOFF_CONFIG(TSO) &&
3584 ret == MLX5_TXCMP_CODE_TSO) {
3586 * The single-segment TSO packet was
3587 * encountered in the array.
3589 goto enter_send_tso;
3591 /* We must not get here. Something is going wrong. */
3593 txq->stats.oerrors++;
3597 * Main Tx loop is completed, do the rest:
3598 * - set completion request if thresholds are reached
3599 * - doorbell the hardware
3600 * - copy the rest of mbufs to elts (if any)
3602 MLX5_ASSERT(MLX5_TXOFF_CONFIG(INLINE) ||
3603 loc.pkts_sent >= loc.pkts_copy);
3604 /* Take a shortcut if nothing is sent. */
3605 if (unlikely(loc.pkts_sent == loc.pkts_loop))
3607 /* Request CQE generation if limits are reached. */
3608 mlx5_tx_request_completion(txq, &loc, olx);
3610 * Ring QP doorbell immediately after WQE building completion
3611 * to improve latencies. The pure software related data treatment
3612 * can be completed after doorbell. Tx CQEs for this SQ are
3613 * processed in this thread only by the polling.
3615 * The rdma core library can map doorbell register in two ways,
3616 * depending on the environment variable "MLX5_SHUT_UP_BF":
3618 * - as regular cached memory, the variable is either missing or
3619 * set to zero. This type of mapping may cause the significant
3620 * doorbell register writing latency and requires explicit memory
3621 * write barrier to mitigate this issue and prevent write combining.
3623 * - as non-cached memory, the variable is present and set to not "0"
3624 * value. This type of mapping may cause performance impact under
3625 * heavy loading conditions but the explicit write memory barrier is
3626 * not required and it may improve core performance.
3628 * - the legacy behaviour (prior 19.08 release) was to use some
3629 * heuristics to decide whether write memory barrier should
3630 * be performed. This behavior is supported with specifying
3631 * tx_db_nc=2, write barrier is skipped if application provides
3632 * the full recommended burst of packets, it supposes the next
3633 * packets are coming and the write barrier will be issued on
3634 * the next burst (after descriptor writing, at least).
3636 mlx5_doorbell_ring(mlx5_tx_bfreg(txq),
3637 *(volatile uint64_t *)loc.wqe_last, txq->wqe_ci,
3638 txq->qp_db, !txq->db_nc &&
3639 (!txq->db_heu || pkts_n % MLX5_TX_DEFAULT_BURST));
3640 /* Not all of the mbufs may be stored into elts yet. */
3641 part = MLX5_TXOFF_CONFIG(INLINE) ? 0 : loc.pkts_sent - loc.pkts_copy;
3642 if (!MLX5_TXOFF_CONFIG(INLINE) && part) {
3644 * There are some single-segment mbufs not stored in elts.
3645 * It can be only if the last packet was single-segment.
3646 * The copying is gathered into one place due to it is
3647 * a good opportunity to optimize that with SIMD.
3648 * Unfortunately if inlining is enabled the gaps in pointer
3649 * array may happen due to early freeing of the inlined mbufs.
3651 mlx5_tx_copy_elts(txq, pkts + loc.pkts_copy, part, olx);
3652 loc.pkts_copy = loc.pkts_sent;
3654 MLX5_ASSERT(txq->elts_s >= (uint16_t)(txq->elts_head - txq->elts_tail));
3655 MLX5_ASSERT(txq->wqe_s >= (uint16_t)(txq->wqe_ci - txq->wqe_pi));
3656 if (pkts_n > loc.pkts_sent) {
3658 * If burst size is large there might be no enough CQE
3659 * fetched from completion queue and no enough resources
3660 * freed to send all the packets.
3665 #ifdef MLX5_PMD_SOFT_COUNTERS
3666 /* Increment sent packets counter. */
3667 txq->stats.opackets += loc.pkts_sent;
3669 if (MLX5_TXOFF_CONFIG(INLINE) && loc.mbuf_free)
3670 __mlx5_tx_free_mbuf(txq, pkts, loc.mbuf_free, olx);
3671 return loc.pkts_sent;
3674 #endif /* RTE_PMD_MLX5_TX_H_ */