2 * Copyright (c) 2016 QLogic Corporation.
6 * See LICENSE.qede_pmd for copyright and licensing details.
9 #ifndef __ECORE_L2_API_H__
10 #define __ECORE_L2_API_H__
12 #include "ecore_status.h"
13 #include "ecore_sp_api.h"
15 #ifndef __EXTRACT__LINUX__
19 ECORE_RSS_IPV4_TCP = 0x4,
20 ECORE_RSS_IPV6_TCP = 0x8,
21 ECORE_RSS_IPV4_UDP = 0x10,
22 ECORE_RSS_IPV6_UDP = 0x20,
25 /* Should be the same as ETH_RSS_IND_TABLE_ENTRIES_NUM */
26 #define ECORE_RSS_IND_TABLE_SIZE 128
27 #define ECORE_RSS_KEY_SIZE 10 /* size in 32b chunks */
30 struct ecore_rss_params {
34 u8 update_rss_capabilities;
35 u8 update_rss_ind_table;
38 u8 rss_table_size_log; /* The table size is 2 ^ rss_table_size_log */
39 u16 rss_ind_table[ECORE_RSS_IND_TABLE_SIZE];
40 u32 rss_key[ECORE_RSS_KEY_SIZE];
43 struct ecore_sge_tpa_params {
44 u8 max_buffers_per_cqe;
49 u8 tpa_ipv4_tunn_en_flg;
50 u8 tpa_ipv6_tunn_en_flg;
52 u8 update_tpa_param_flg;
54 u8 tpa_hdr_data_split_flg;
55 u8 tpa_gro_consistent_flg;
58 u16 tpa_min_size_to_start;
59 u16 tpa_min_size_to_cont;
62 enum ecore_filter_opcode {
66 ECORE_FILTER_REPLACE, /* Delete all MACs and add new one instead */
67 ECORE_FILTER_FLUSH, /* Removes all filters */
70 enum ecore_filter_ucast_type {
73 ECORE_FILTER_MAC_VLAN,
74 ECORE_FILTER_INNER_MAC,
75 ECORE_FILTER_INNER_VLAN,
76 ECORE_FILTER_INNER_PAIR,
77 ECORE_FILTER_INNER_MAC_VNI_PAIR,
78 ECORE_FILTER_MAC_VNI_PAIR,
82 struct ecore_filter_ucast {
83 enum ecore_filter_opcode opcode;
84 enum ecore_filter_ucast_type type;
88 u8 vport_to_remove_from;
89 unsigned char mac[ETH_ALEN];
95 struct ecore_filter_mcast {
96 /* MOVE is not supported for multicast */
97 enum ecore_filter_opcode opcode;
99 u8 vport_to_remove_from;
101 #define ECORE_MAX_MC_ADDRS 64
102 unsigned char mac[ECORE_MAX_MC_ADDRS][ETH_ALEN];
105 struct ecore_filter_accept_flags {
106 u8 update_rx_mode_config;
107 u8 update_tx_mode_config;
110 #define ECORE_ACCEPT_NONE 0x01
111 #define ECORE_ACCEPT_UCAST_MATCHED 0x02
112 #define ECORE_ACCEPT_UCAST_UNMATCHED 0x04
113 #define ECORE_ACCEPT_MCAST_MATCHED 0x08
114 #define ECORE_ACCEPT_MCAST_UNMATCHED 0x10
115 #define ECORE_ACCEPT_BCAST 0x20
118 /* Add / remove / move / remove-all unicast MAC-VLAN filters.
119 * FW will assert in the following cases, so driver should take care...:
120 * 1. Adding a filter to a full table.
121 * 2. Adding a filter which already exists on that vport.
122 * 3. Removing a filter which doesn't exist.
126 ecore_filter_ucast_cmd(struct ecore_dev *p_dev,
127 struct ecore_filter_ucast *p_filter_cmd,
128 enum spq_mode comp_mode,
129 struct ecore_spq_comp_cb *p_comp_data);
131 /* Add / remove / move multicast MAC filters. */
133 ecore_filter_mcast_cmd(struct ecore_dev *p_dev,
134 struct ecore_filter_mcast *p_filter_cmd,
135 enum spq_mode comp_mode,
136 struct ecore_spq_comp_cb *p_comp_data);
138 /* Set "accept" filters */
140 ecore_filter_accept_cmd(
141 struct ecore_dev *p_dev,
143 struct ecore_filter_accept_flags accept_flags,
144 u8 update_accept_any_vlan,
146 enum spq_mode comp_mode,
147 struct ecore_spq_comp_cb *p_comp_data);
150 * @brief ecore_sp_eth_rx_queue_start - RX Queue Start Ramrod
152 * This ramrod initializes an RX Queue for a VPort. An Assert is generated if
153 * the VPort ID is not currently initialized.
157 * @param rx_queue_id RX Queue ID: Zero based, per VPort, allocated
158 * by assignment (=rssId)
159 * @param vport_id VPort ID
160 * @param u8 stats_id VPort ID which the queue stats
162 * @param sb Status Block of the Function Event Ring
163 * @param sb_index Index into the status block of the
164 * Function Event Ring
165 * @param bd_max_bytes Maximum bytes that can be placed on a BD
166 * @param bd_chain_phys_addr Physical address of BDs for receive.
167 * @param cqe_pbl_addr Physical address of the CQE PBL Table.
168 * @param cqe_pbl_size Size of the CQE PBL Table
169 * @param pp_prod Pointer to place producer's
170 * address for the Rx Q (May be
173 * @return enum _ecore_status_t
175 enum _ecore_status_t ecore_sp_eth_rx_queue_start(struct ecore_hwfn *p_hwfn,
183 dma_addr_t bd_chain_phys_addr,
184 dma_addr_t cqe_pbl_addr,
186 void OSAL_IOMEM **pp_prod);
189 * @brief ecore_sp_eth_rx_queue_stop -
191 * This ramrod closes an RX queue. It sends RX queue stop ramrod
192 * + CFC delete ramrod
195 * @param rx_queue_id RX Queue ID
196 * @param eq_completion_only If True completion will be on
197 * EQe, if False completion will be
198 * on EQe if p_hwfn opaque
199 * different from the RXQ opaque
201 * @param cqe_completion If True completion will be
203 * @return enum _ecore_status_t
206 ecore_sp_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn,
208 bool eq_completion_only,
209 bool cqe_completion);
212 * @brief ecore_sp_eth_tx_queue_start - TX Queue Start Ramrod
214 * This ramrod initializes a TX Queue for a VPort. An Assert is generated if
215 * the VPort is not currently initialized.
219 * @param tx_queue_id TX Queue ID
220 * @param vport_id VPort ID
221 * @param stats_id VPort ID which the queue stats
223 * @param sb Status Block of the Function Event Ring
224 * @param sb_index Index into the status block of the Function
226 * @param pbl_addr address of the pbl array
227 * @param pbl_size number of entries in pbl
228 * @param pp_doorbell Pointer to place doorbell pointer (May be NULL).
229 * This address should be used with the
230 * DIRECT_REG_WR macro.
232 * @return enum _ecore_status_t
234 enum _ecore_status_t ecore_sp_eth_tx_queue_start(struct ecore_hwfn *p_hwfn,
247 * @brief ecore_sp_eth_tx_queue_stop -
249 * This ramrod closes a TX queue. It sends TX queue stop ramrod
250 * + CFC delete ramrod
253 * @param tx_queue_id TX Queue ID
255 * @return enum _ecore_status_t
257 enum _ecore_status_t ecore_sp_eth_tx_queue_stop(struct ecore_hwfn *p_hwfn,
260 enum ecore_tpa_mode {
267 struct ecore_sp_vport_start_params {
268 enum ecore_tpa_mode tpa_mode;
269 bool remove_inner_vlan; /* Inner VLAN removal is enabled */
270 bool tx_switching; /* Vport supports tx-switching */
271 bool handle_ptp_pkts; /* Handle PTP packets */
272 bool only_untagged; /* Untagged pkt control */
273 bool drop_ttl0; /* Drop packets with TTL = 0 */
274 u8 max_buffers_per_cqe;
277 u8 vport_id; /* VPORT ID */
278 u16 mtu; /* VPORT MTU */
279 bool zero_placement_offset;
283 * @brief ecore_sp_vport_start -
285 * This ramrod initializes a VPort. An Assert if generated if the Function ID
286 * of the VPort is not enabled.
289 * @param p_params VPORT start params
291 * @return enum _ecore_status_t
294 ecore_sp_vport_start(struct ecore_hwfn *p_hwfn,
295 struct ecore_sp_vport_start_params *p_params);
297 struct ecore_sp_vport_update_params {
300 u8 update_vport_active_rx_flg;
301 u8 vport_active_rx_flg;
302 u8 update_vport_active_tx_flg;
303 u8 vport_active_tx_flg;
304 u8 update_inner_vlan_removal_flg;
305 u8 inner_vlan_removal_flg;
306 u8 silent_vlan_removal_flg;
307 u8 update_default_vlan_enable_flg;
308 u8 default_vlan_enable_flg;
309 u8 update_default_vlan_flg;
311 u8 update_tx_switching_flg;
313 u8 update_approx_mcast_flg;
314 u8 update_anti_spoofing_en_flg;
316 u8 update_accept_any_vlan_flg;
318 unsigned long bins[8];
319 struct ecore_rss_params *rss_params;
320 struct ecore_filter_accept_flags accept_flags;
321 struct ecore_sge_tpa_params *sge_tpa_params;
325 * @brief ecore_sp_vport_update -
327 * This ramrod updates the parameters of the VPort. Every field can be updated
328 * independently, according to flags.
330 * This ramrod is also used to set the VPort state to active after creation.
331 * An Assert is generated if the VPort does not contain an RX queue.
336 * @return enum _ecore_status_t
339 ecore_sp_vport_update(struct ecore_hwfn *p_hwfn,
340 struct ecore_sp_vport_update_params *p_params,
341 enum spq_mode comp_mode,
342 struct ecore_spq_comp_cb *p_comp_data);
344 * @brief ecore_sp_vport_stop -
346 * This ramrod closes a VPort after all its RX and TX queues are terminated.
347 * An Assert is generated if any queues are left open.
351 * @param vport_id VPort ID
353 * @return enum _ecore_status_t
355 enum _ecore_status_t ecore_sp_vport_stop(struct ecore_hwfn *p_hwfn,
360 ecore_sp_eth_filter_ucast(struct ecore_hwfn *p_hwfn,
362 struct ecore_filter_ucast *p_filter_cmd,
363 enum spq_mode comp_mode,
364 struct ecore_spq_comp_cb *p_comp_data);
367 * @brief ecore_sp_rx_eth_queues_update -
369 * This ramrod updates an RX queue. It is used for setting the active state
370 * of the queue and updating the TPA and SGE parameters.
372 * @note Final phase API.
375 * @param rx_queue_id RX Queue ID
376 * @param num_rxqs Allow to update multiple rx
377 * queues, from rx_queue_id to
378 * (rx_queue_id + num_rxqs)
379 * @param complete_cqe_flg Post completion to the CQE Ring if set
380 * @param complete_event_flg Post completion to the Event Ring if set
382 * @return enum _ecore_status_t
386 ecore_sp_eth_rx_queues_update(struct ecore_hwfn *p_hwfn,
390 u8 complete_event_flg,
391 enum spq_mode comp_mode,
392 struct ecore_spq_comp_cb *p_comp_data);
394 void __ecore_get_vport_stats(struct ecore_hwfn *p_hwfn,
395 struct ecore_ptt *p_ptt,
396 struct ecore_eth_stats *stats,
397 u16 statistics_bin, bool b_get_port_stats);
399 void ecore_get_vport_stats(struct ecore_dev *p_dev,
400 struct ecore_eth_stats *stats);
402 void ecore_reset_vport_stats(struct ecore_dev *p_dev);