2 * Copyright (c) 2016 QLogic Corporation.
6 * See LICENSE.qede_pmd for copyright and licensing details.
9 /****************************************************************************
13 * Description: MCP public data
15 * Created: 13/01/2013 yanivr
17 ****************************************************************************/
22 #define VF_MAX_STATIC 192 /* In case of AH */
24 #define MCP_GLOB_PATH_MAX 2
25 #define MCP_PORT_MAX 2 /* Global */
26 #define MCP_GLOB_PORT_MAX 4 /* Global */
27 #define MCP_GLOB_FUNC_MAX 16 /* Global */
29 typedef u32 offsize_t; /* In DWORDS !!! */
30 /* Offset from the beginning of the MCP scratchpad */
31 #define OFFSIZE_OFFSET_SHIFT 0
32 #define OFFSIZE_OFFSET_MASK 0x0000ffff
33 /* Size of specific element (not the whole array if any) */
34 #define OFFSIZE_SIZE_SHIFT 16
35 #define OFFSIZE_SIZE_MASK 0xffff0000
37 /* SECTION_OFFSET is calculating the offset in bytes out of offsize */
38 #define SECTION_OFFSET(_offsize) \
39 ((((_offsize & OFFSIZE_OFFSET_MASK) >> OFFSIZE_OFFSET_SHIFT) << 2))
41 /* SECTION_SIZE is calculating the size in bytes out of offsize */
42 #define SECTION_SIZE(_offsize) \
43 (((_offsize & OFFSIZE_SIZE_MASK) >> OFFSIZE_SIZE_SHIFT) << 2)
45 /* SECTION_ADDR returns the GRC addr of a section, given offsize and index
48 #define SECTION_ADDR(_offsize, idx) \
50 SECTION_OFFSET(_offsize) + (SECTION_SIZE(_offsize) * idx))
52 /* SECTION_OFFSIZE_ADDR returns the GRC addr to the offsize address. Use
53 * offsetof, since the OFFSETUP collide with the firmware definition
55 #define SECTION_OFFSIZE_ADDR(_pub_base, _section) \
56 (_pub_base + offsetof(struct mcp_public_data, sections[_section]))
57 /* PHY configuration */
59 /* 0 = autoneg, 1000/10000/20000/25000/40000/50000/100000 */
61 #define ETH_SPEED_AUTONEG 0
62 #define ETH_SPEED_SMARTLINQ 0x8
64 u32 pause; /* bitmask */
65 #define ETH_PAUSE_NONE 0x0
66 #define ETH_PAUSE_AUTONEG 0x1
67 #define ETH_PAUSE_RX 0x2
68 #define ETH_PAUSE_TX 0x4
70 u32 adv_speed; /* Default should be the speed_cap_mask */
72 #define ETH_LOOPBACK_NONE (0)
73 /* Serdes loopback. In AH, it refers to Near End */
74 #define ETH_LOOPBACK_INT_PHY (1)
75 #define ETH_LOOPBACK_EXT_PHY (2) /* External PHY Loopback */
76 /* External Loopback (Require loopback plug) */
77 #define ETH_LOOPBACK_EXT (3)
78 #define ETH_LOOPBACK_MAC (4) /* MAC Loopback - not supported */
79 #define ETH_LOOPBACK_CNIG_AH_ONLY_0123 (5) /* Port to itself */
80 #define ETH_LOOPBACK_CNIG_AH_ONLY_2301 (6) /* Port to Port */
81 #define ETH_LOOPBACK_PCS_AH_ONLY (7) /* PCS loopback (TX to RX) */
82 /* Loop RX packet from PCS to TX */
83 #define ETH_LOOPBACK_REVERSE_MAC_AH_ONLY (8)
84 /* Remote Serdes Loopback (RX to TX) */
85 #define ETH_LOOPBACK_INT_PHY_FEA_AH_ONLY (9)
87 /* Used to configure the EEE Tx LPI timer, has several modes of
88 * operation, according to bits 29:28
89 * 2'b00: Timer will be configured by nvram, output will be the value
91 * 2'b01: Timer will be configured by nvram, output will be in
93 * 2'b10: bits 1:0 contain an nvram value which will be used instead
94 * of the one located in the nvram. Output will be that value.
95 * 2'b11: bits 19:0 contain the idle timer in microseconds; output
96 * will be in 16xmicroseconds.
97 * Bits 31:30 should be 2'b11 in order for EEE to be enabled.
100 #define EEE_MODE_TIMER_USEC_MASK (0x000fffff)
101 #define EEE_MODE_TIMER_USEC_OFFSET (0)
102 #define EEE_MODE_TIMER_USEC_BALANCED_TIME (0xa00)
103 #define EEE_MODE_TIMER_USEC_AGGRESSIVE_TIME (0x100)
104 #define EEE_MODE_TIMER_USEC_LATENCY_TIME (0x6000)
105 /* Set by the driver to request status timer will be in microseconds and and not
106 * in EEE policy definition
108 #define EEE_MODE_OUTPUT_TIME (1 << 28)
109 /* Set by the driver to override default nvm timer */
110 #define EEE_MODE_OVERRIDE_NVRAM (1 << 29)
111 #define EEE_MODE_ENABLE_LPI (1 << 30) /* Set when */
112 #define EEE_MODE_ADV_LPI (1 << 31) /* Set when EEE is enabled */
116 u32 dynamic_cfg; /* device control channel */
117 #define PORT_MF_CFG_OV_TAG_MASK 0x0000ffff
118 #define PORT_MF_CFG_OV_TAG_SHIFT 0
119 #define PORT_MF_CFG_OV_TAG_DEFAULT PORT_MF_CFG_OV_TAG_MASK
124 /* DO NOT add new fields in the middle
125 * MUST be synced with struct pmm_stats_map
128 u64 r64; /* 0x00 (Offset 0x00 ) RX 64-byte frame counter*/
129 u64 r127; /* 0x01 (Offset 0x08 ) RX 65 to 127 byte frame counter*/
130 u64 r255; /* 0x02 (Offset 0x10 ) RX 128 to 255 byte frame counter*/
131 u64 r511; /* 0x03 (Offset 0x18 ) RX 256 to 511 byte frame counter*/
132 u64 r1023; /* 0x04 (Offset 0x20 ) RX 512 to 1023 byte frame counter*/
133 /* 0x05 (Offset 0x28 ) RX 1024 to 1518 byte frame counter */
135 /* 0x06 (Offset 0x30 ) RX 1519 to 1522 byte VLAN-tagged frame counter */
137 u64 r2047; /* 0x07 (Offset 0x38 ) RX 1519 to 2047 byte frame counter*/
138 u64 r4095; /* 0x08 (Offset 0x40 ) RX 2048 to 4095 byte frame counter*/
139 u64 r9216; /* 0x09 (Offset 0x48 ) RX 4096 to 9216 byte frame counter*/
140 /* 0x0A (Offset 0x50 ) RX 9217 to 16383 byte frame counter */
142 u64 rfcs; /* 0x0F (Offset 0x58 ) RX FCS error frame counter*/
143 u64 rxcf; /* 0x10 (Offset 0x60 ) RX control frame counter*/
144 u64 rxpf; /* 0x11 (Offset 0x68 ) RX pause frame counter*/
145 u64 rxpp; /* 0x12 (Offset 0x70 ) RX PFC frame counter*/
146 u64 raln; /* 0x16 (Offset 0x78 ) RX alignment error counter*/
147 u64 rfcr; /* 0x19 (Offset 0x80 ) RX false carrier counter */
148 u64 rovr; /* 0x1A (Offset 0x88 ) RX oversized frame counter*/
149 u64 rjbr; /* 0x1B (Offset 0x90 ) RX jabber frame counter */
150 u64 rund; /* 0x34 (Offset 0x98 ) RX undersized frame counter */
151 u64 rfrg; /* 0x35 (Offset 0xa0 ) RX fragment counter */
152 u64 t64; /* 0x40 (Offset 0xa8 ) TX 64-byte frame counter */
153 u64 t127; /* 0x41 (Offset 0xb0 ) TX 65 to 127 byte frame counter */
154 u64 t255; /* 0x42 (Offset 0xb8 ) TX 128 to 255 byte frame counter*/
155 u64 t511; /* 0x43 (Offset 0xc0 ) TX 256 to 511 byte frame counter*/
156 u64 t1023; /* 0x44 (Offset 0xc8 ) TX 512 to 1023 byte frame counter*/
157 /* 0x45 (Offset 0xd0 ) TX 1024 to 1518 byte frame counter */
159 /* 0x47 (Offset 0xd8 ) TX 1519 to 2047 byte frame counter */
161 /* 0x48 (Offset 0xe0 ) TX 2048 to 4095 byte frame counter */
163 /* 0x49 (Offset 0xe8 ) TX 4096 to 9216 byte frame counter */
165 /* 0x4A (Offset 0xf0 ) TX 9217 to 16383 byte frame counter */
167 u64 txpf; /* 0x50 (Offset 0xf8 ) TX pause frame counter */
168 u64 txpp; /* 0x51 (Offset 0x100) TX PFC frame counter */
169 /* 0x6C (Offset 0x108) Transmit Logical Type LLFC message counter */
171 u64 tncl; /* 0x6E (Offset 0x110) Transmit Total Collision Counter */
172 u64 rbyte; /* 0x3d (Offset 0x118) RX byte counter */
173 u64 rxuca; /* 0x0c (Offset 0x120) RX UC frame counter */
174 u64 rxmca; /* 0x0d (Offset 0x128) RX MC frame counter */
175 u64 rxbca; /* 0x0e (Offset 0x130) RX BC frame counter */
176 /* 0x22 (Offset 0x138) RX good frame (good CRC, not oversized, no ERROR) */
178 u64 tbyte; /* 0x6f (Offset 0x140) TX byte counter */
179 u64 txuca; /* 0x4d (Offset 0x148) TX UC frame counter */
180 u64 txmca; /* 0x4e (Offset 0x150) TX MC frame counter */
181 u64 txbca; /* 0x4f (Offset 0x158) TX BC frame counter */
182 u64 txcf; /* 0x54 (Offset 0x160) TX control frame counter */
183 /* HSI - Cannot add more stats to this struct. If needed, then need to open new
195 struct brb_stats brb;
196 struct eth_stats eth;
199 /*----+------------------------------------------------------------------------
200 * C | Number and | Ports in| Ports in|2 PHY-s |# of ports|# of engines
201 * h | rate of | team #1 | team #2 |are used|per path | (paths)
202 * i | physical | | | | | enabled
203 * p | ports | | | | |
204 *====+============+=========+=========+========+==========+===================
205 * BB | 1x100G | This is special mode, where there are actually 2 HW func
206 * BB | 2x10/20Gbps| 0,1 | NA | No | 1 | 1
207 * BB | 2x40 Gbps | 0,1 | NA | Yes | 1 | 1
208 * BB | 2x50Gbps | 0,1 | NA | No | 1 | 1
209 * BB | 4x10Gbps | 0,2 | 1,3 | No | 1/2 | 1,2 (2 is optional)
210 * BB | 4x10Gbps | 0,1 | 2,3 | No | 1/2 | 1,2 (2 is optional)
211 * BB | 4x10Gbps | 0,3 | 1,2 | No | 1/2 | 1,2 (2 is optional)
212 * BB | 4x10Gbps | 0,1,2,3 | NA | No | 1 | 1
213 * AH | 2x10/20Gbps| 0,1 | NA | NA | 1 | NA
214 * AH | 4x10Gbps | 0,1 | 2,3 | NA | 2 | NA
215 * AH | 4x10Gbps | 0,2 | 1,3 | NA | 2 | NA
216 * AH | 4x10Gbps | 0,3 | 1,2 | NA | 2 | NA
217 * AH | 4x10Gbps | 0,1,2,3 | NA | NA | 1 | NA
218 *====+============+=========+=========+========+==========+===================
223 #define CMT_TEAM_MAX 2
225 struct couple_mode_teaming {
226 u8 port_cmt[MCP_GLOB_PORT_MAX];
227 #define PORT_CMT_IN_TEAM (1 << 0)
229 #define PORT_CMT_PORT_ROLE (1 << 1)
230 #define PORT_CMT_PORT_INACTIVE (0 << 1)
231 #define PORT_CMT_PORT_ACTIVE (1 << 1)
233 #define PORT_CMT_TEAM_MASK (1 << 2)
234 #define PORT_CMT_TEAM0 (0 << 2)
235 #define PORT_CMT_TEAM1 (1 << 2)
238 /**************************************
239 * LLDP and DCBX HSI structures
240 **************************************/
241 #define LLDP_CHASSIS_ID_STAT_LEN 4
242 #define LLDP_PORT_ID_STAT_LEN 4
243 #define DCBX_MAX_APP_PROTOCOL 32
244 #define MAX_SYSTEM_LLDP_TLV_DATA 32
246 typedef enum _lldp_agent_e {
247 LLDP_NEAREST_BRIDGE = 0,
248 LLDP_NEAREST_NON_TPMR_BRIDGE,
249 LLDP_NEAREST_CUSTOMER_BRIDGE,
253 struct lldp_config_params_s {
255 #define LLDP_CONFIG_TX_INTERVAL_MASK 0x000000ff
256 #define LLDP_CONFIG_TX_INTERVAL_SHIFT 0
257 #define LLDP_CONFIG_HOLD_MASK 0x00000f00
258 #define LLDP_CONFIG_HOLD_SHIFT 8
259 #define LLDP_CONFIG_MAX_CREDIT_MASK 0x0000f000
260 #define LLDP_CONFIG_MAX_CREDIT_SHIFT 12
261 #define LLDP_CONFIG_ENABLE_RX_MASK 0x40000000
262 #define LLDP_CONFIG_ENABLE_RX_SHIFT 30
263 #define LLDP_CONFIG_ENABLE_TX_MASK 0x80000000
264 #define LLDP_CONFIG_ENABLE_TX_SHIFT 31
265 /* Holds local Chassis ID TLV header, subtype and 9B of payload.
266 * If firtst byte is 0, then we will use default chassis ID
268 u32 local_chassis_id[LLDP_CHASSIS_ID_STAT_LEN];
269 /* Holds local Port ID TLV header, subtype and 9B of payload.
270 * If firtst byte is 0, then we will use default port ID
272 u32 local_port_id[LLDP_PORT_ID_STAT_LEN];
275 struct lldp_status_params_s {
277 u32 status; /* TBD */
278 /* Holds remote Chassis ID TLV header, subtype and 9B of payload. */
279 u32 peer_chassis_id[LLDP_CHASSIS_ID_STAT_LEN];
280 /* Holds remote Port ID TLV header, subtype and 9B of payload. */
281 u32 peer_port_id[LLDP_PORT_ID_STAT_LEN];
285 struct dcbx_ets_feature {
287 #define DCBX_ETS_ENABLED_MASK 0x00000001
288 #define DCBX_ETS_ENABLED_SHIFT 0
289 #define DCBX_ETS_WILLING_MASK 0x00000002
290 #define DCBX_ETS_WILLING_SHIFT 1
291 #define DCBX_ETS_ERROR_MASK 0x00000004
292 #define DCBX_ETS_ERROR_SHIFT 2
293 #define DCBX_ETS_CBS_MASK 0x00000008
294 #define DCBX_ETS_CBS_SHIFT 3
295 #define DCBX_ETS_MAX_TCS_MASK 0x000000f0
296 #define DCBX_ETS_MAX_TCS_SHIFT 4
297 #define DCBX_ISCSI_OOO_TC_MASK 0x00000f00
298 #define DCBX_ISCSI_OOO_TC_SHIFT 8
299 /* Entries in tc table are orginized that the left most is pri 0, right most is
304 #define DCBX_ISCSI_OOO_TC (4)
306 #define NIG_ETS_ISCSI_OOO_CLIENT_OFFSET (DCBX_ISCSI_OOO_TC + 1)
307 #define DCBX_CEE_STRICT_PRIORITY 0xf
308 /* Entries in tc table are orginized that the left most is pri 0, right most is
313 /* Entries in tc table are orginized that the left most is pri 0, right most is
318 #define DCBX_ETS_TSA_STRICT 0
319 #define DCBX_ETS_TSA_CBS 1
320 #define DCBX_ETS_TSA_ETS 2
323 struct dcbx_app_priority_entry {
325 #define DCBX_APP_PRI_MAP_MASK 0x000000ff
326 #define DCBX_APP_PRI_MAP_SHIFT 0
327 #define DCBX_APP_PRI_0 0x01
328 #define DCBX_APP_PRI_1 0x02
329 #define DCBX_APP_PRI_2 0x04
330 #define DCBX_APP_PRI_3 0x08
331 #define DCBX_APP_PRI_4 0x10
332 #define DCBX_APP_PRI_5 0x20
333 #define DCBX_APP_PRI_6 0x40
334 #define DCBX_APP_PRI_7 0x80
335 #define DCBX_APP_SF_MASK 0x00000300
336 #define DCBX_APP_SF_SHIFT 8
337 #define DCBX_APP_SF_ETHTYPE 0
338 #define DCBX_APP_SF_PORT 1
339 #define DCBX_APP_SF_IEEE_MASK 0x0000f000
340 #define DCBX_APP_SF_IEEE_SHIFT 12
341 #define DCBX_APP_SF_IEEE_RESERVED 0
342 #define DCBX_APP_SF_IEEE_ETHTYPE 1
343 #define DCBX_APP_SF_IEEE_TCP_PORT 2
344 #define DCBX_APP_SF_IEEE_UDP_PORT 3
345 #define DCBX_APP_SF_IEEE_TCP_UDP_PORT 4
347 #define DCBX_APP_PROTOCOL_ID_MASK 0xffff0000
348 #define DCBX_APP_PROTOCOL_ID_SHIFT 16
352 /* FW structure in BE */
353 struct dcbx_app_priority_feature {
355 #define DCBX_APP_ENABLED_MASK 0x00000001
356 #define DCBX_APP_ENABLED_SHIFT 0
357 #define DCBX_APP_WILLING_MASK 0x00000002
358 #define DCBX_APP_WILLING_SHIFT 1
359 #define DCBX_APP_ERROR_MASK 0x00000004
360 #define DCBX_APP_ERROR_SHIFT 2
362 #define DCBX_APP_DEFAULT_PRI_MASK 0x00000f00
363 #define DCBX_APP_DEFAULT_PRI_SHIFT 8
365 #define DCBX_APP_MAX_TCS_MASK 0x0000f000
366 #define DCBX_APP_MAX_TCS_SHIFT 12
367 #define DCBX_APP_NUM_ENTRIES_MASK 0x00ff0000
368 #define DCBX_APP_NUM_ENTRIES_SHIFT 16
369 struct dcbx_app_priority_entry app_pri_tbl[DCBX_MAX_APP_PROTOCOL];
372 /* FW structure in BE */
373 struct dcbx_features {
375 struct dcbx_ets_feature ets;
378 #define DCBX_PFC_PRI_EN_BITMAP_MASK 0x000000ff
379 #define DCBX_PFC_PRI_EN_BITMAP_SHIFT 0
380 #define DCBX_PFC_PRI_EN_BITMAP_PRI_0 0x01
381 #define DCBX_PFC_PRI_EN_BITMAP_PRI_1 0x02
382 #define DCBX_PFC_PRI_EN_BITMAP_PRI_2 0x04
383 #define DCBX_PFC_PRI_EN_BITMAP_PRI_3 0x08
384 #define DCBX_PFC_PRI_EN_BITMAP_PRI_4 0x10
385 #define DCBX_PFC_PRI_EN_BITMAP_PRI_5 0x20
386 #define DCBX_PFC_PRI_EN_BITMAP_PRI_6 0x40
387 #define DCBX_PFC_PRI_EN_BITMAP_PRI_7 0x80
389 #define DCBX_PFC_FLAGS_MASK 0x0000ff00
390 #define DCBX_PFC_FLAGS_SHIFT 8
391 #define DCBX_PFC_CAPS_MASK 0x00000f00
392 #define DCBX_PFC_CAPS_SHIFT 8
393 #define DCBX_PFC_MBC_MASK 0x00004000
394 #define DCBX_PFC_MBC_SHIFT 14
395 #define DCBX_PFC_WILLING_MASK 0x00008000
396 #define DCBX_PFC_WILLING_SHIFT 15
397 #define DCBX_PFC_ENABLED_MASK 0x00010000
398 #define DCBX_PFC_ENABLED_SHIFT 16
399 #define DCBX_PFC_ERROR_MASK 0x00020000
400 #define DCBX_PFC_ERROR_SHIFT 17
403 struct dcbx_app_priority_feature app;
406 struct dcbx_local_params {
408 #define DCBX_CONFIG_VERSION_MASK 0x00000007
409 #define DCBX_CONFIG_VERSION_SHIFT 0
410 #define DCBX_CONFIG_VERSION_DISABLED 0
411 #define DCBX_CONFIG_VERSION_IEEE 1
412 #define DCBX_CONFIG_VERSION_CEE 2
413 #define DCBX_CONFIG_VERSION_STATIC 4
416 struct dcbx_features features;
423 #define DCBX_CONFIG_VERSION_MASK 0x00000007
424 #define DCBX_CONFIG_VERSION_SHIFT 0
425 #define DCBX_CONFIG_VERSION_DISABLED 0
426 #define DCBX_CONFIG_VERSION_IEEE 1
427 #define DCBX_CONFIG_VERSION_CEE 2
428 #define DCBX_CONFIG_VERSION_STATIC 4
430 struct dcbx_features features;
434 struct lldp_system_tlvs_buffer_s {
437 u32 data[MAX_SYSTEM_LLDP_TLV_DATA];
440 struct dcb_dscp_map {
442 #define DCB_DSCP_ENABLE_MASK 0x1
443 #define DCB_DSCP_ENABLE_SHIFT 0
444 #define DCB_DSCP_ENABLE 1
448 /**************************************/
450 /* P U B L I C G L O B A L */
452 /**************************************/
453 struct public_global {
454 u32 max_path; /* 32bit is wasty, but this will be used often */
455 /* (Global) 32bit is wasty, but this will be used often */
457 #define MODE_1P 1 /* TBD - NEED TO THINK OF A BETTER NAME */
462 u32 phymod_dbg_mb_offset;
463 struct couple_mode_teaming cmt;
464 /* Temperature in Celcius (-255C / +255C), measured every second. */
465 s32 internal_temperature;
467 u32 running_bundle_id;
468 s32 external_temperature;
470 #define MDUMP_REASON_INTERNAL_ERROR (1 << 0)
471 #define MDUMP_REASON_EXTERNAL_TRIGGER (1 << 1)
472 #define MDUMP_REASON_DUMP_AGED (1 << 2)
473 u32 ext_phy_upgrade_fw;
474 #define EXT_PHY_FW_UPGRADE_STATUS_MASK (0x0000ffff)
475 #define EXT_PHY_FW_UPGRADE_STATUS_SHIFT (0)
476 #define EXT_PHY_FW_UPGRADE_STATUS_IN_PROGRESS (1)
477 #define EXT_PHY_FW_UPGRADE_STATUS_FAILED (2)
478 #define EXT_PHY_FW_UPGRADE_STATUS_SUCCESS (3)
479 #define EXT_PHY_FW_UPGRADE_TYPE_MASK (0xffff0000)
480 #define EXT_PHY_FW_UPGRADE_TYPE_SHIFT (16)
483 /**************************************/
485 /* P U B L I C P A T H */
487 /**************************************/
489 /****************************************************************************
490 * Shared Memory 2 Region *
491 ****************************************************************************/
492 /* The fw_flr_ack is actually built in the following way: */
494 /* 128 bit: VF ack */
495 /* 8 bit: ios_dis_ack */
496 /* In order to maintain endianity in the mailbox hsi, we want to keep using */
497 /* u32. The fw must have the VF right after the PF since this is how it */
498 /* access arrays(it expects always the VF to reside after the PF, and that */
499 /* makes the calculation much easier for it. ) */
500 /* In order to answer both limitations, and keep the struct small, the code */
501 /* will abuse the structure defined here to achieve the actual partition */
503 /****************************************************************************/
507 u32 accum_ack; /* 0..15:PF, 16..207:VF, 256..271:IOV_DIS */
508 #define ACCUM_ACK_PF_BASE 0
509 #define ACCUM_ACK_PF_SHIFT 0
511 #define ACCUM_ACK_VF_BASE 8
512 #define ACCUM_ACK_VF_SHIFT 3
514 #define ACCUM_ACK_IOV_DIS_BASE 256
515 #define ACCUM_ACK_IOV_DIS_SHIFT 8
520 struct fw_flr_mb flr_mb;
522 * mcp_vf_disabled is set by the MCP to indicate the driver about VFs
523 * which were disabled/flred
525 u32 mcp_vf_disabled[VF_MAX_STATIC / 32]; /* 0x003c */
527 /* Reset on mcp reset, and incremented for eveny process kill event. */
529 #define PROCESS_KILL_COUNTER_MASK 0x0000ffff
530 #define PROCESS_KILL_COUNTER_SHIFT 0
531 #define PROCESS_KILL_GLOB_AEU_BIT_MASK 0xffff0000
532 #define PROCESS_KILL_GLOB_AEU_BIT_SHIFT 16
533 #define GLOBAL_AEU_BIT(aeu_reg_id, aeu_bit) (aeu_reg_id * 32 + aeu_bit)
536 /**************************************/
538 /* P U B L I C P O R T */
540 /**************************************/
541 #define FC_NPIV_WWPN_SIZE 8
542 #define FC_NPIV_WWNN_SIZE 8
543 struct dci_npiv_settings {
544 u8 npiv_wwpn[FC_NPIV_WWPN_SIZE];
545 u8 npiv_wwnn[FC_NPIV_WWNN_SIZE];
548 struct dci_fc_npiv_cfg {
549 /* hdr used internally by the MFW */
554 #define MAX_NUMBER_NPIV 64
555 struct dci_fc_npiv_tbl {
556 struct dci_fc_npiv_cfg fc_npiv_cfg;
557 struct dci_npiv_settings settings[MAX_NUMBER_NPIV];
560 /****************************************************************************
561 * Driver <-> FW Mailbox *
562 ****************************************************************************/
565 u32 validity_map; /* 0x0 (4*2 = 0x8) */
568 #define MCP_VALIDITY_PCI_CFG 0x00100000
569 #define MCP_VALIDITY_MB 0x00200000
570 #define MCP_VALIDITY_DEV_INFO 0x00400000
571 #define MCP_VALIDITY_RESERVED 0x00000007
573 /* One licensing bit should be set */
574 /* yaniv - tbd ? license */
575 #define MCP_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038
576 #define MCP_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008
577 #define MCP_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010
578 #define MCP_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020
581 #define MCP_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000
582 #define MCP_VALIDITY_ACTIVE_MFW_MASK 0x000001c0
583 #define MCP_VALIDITY_ACTIVE_MFW_NCSI 0x00000040
584 #define MCP_VALIDITY_ACTIVE_MFW_NONE 0x000001c0
587 #define LINK_STATUS_LINK_UP 0x00000001
588 #define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
589 #define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
590 #define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
591 #define LINK_STATUS_SPEED_AND_DUPLEX_10G (3 << 1)
592 #define LINK_STATUS_SPEED_AND_DUPLEX_20G (4 << 1)
593 #define LINK_STATUS_SPEED_AND_DUPLEX_40G (5 << 1)
594 #define LINK_STATUS_SPEED_AND_DUPLEX_50G (6 << 1)
595 #define LINK_STATUS_SPEED_AND_DUPLEX_100G (7 << 1)
596 #define LINK_STATUS_SPEED_AND_DUPLEX_25G (8 << 1)
597 #define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
598 #define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
599 #define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
600 #define LINK_STATUS_PFC_ENABLED 0x00000100
601 #define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
602 #define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
603 #define LINK_STATUS_LINK_PARTNER_10G_CAPABLE 0x00000800
604 #define LINK_STATUS_LINK_PARTNER_20G_CAPABLE 0x00001000
605 #define LINK_STATUS_LINK_PARTNER_40G_CAPABLE 0x00002000
606 #define LINK_STATUS_LINK_PARTNER_50G_CAPABLE 0x00004000
607 #define LINK_STATUS_LINK_PARTNER_100G_CAPABLE 0x00008000
608 #define LINK_STATUS_LINK_PARTNER_25G_CAPABLE 0x00010000
609 #define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
610 #define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
611 #define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
612 #define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
613 #define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3 << 18)
614 #define LINK_STATUS_SFP_TX_FAULT 0x00100000
615 #define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
616 #define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
617 #define LINK_STATUS_RX_SIGNAL_PRESENT 0x00800000
618 #define LINK_STATUS_MAC_LOCAL_FAULT 0x01000000
619 #define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
620 #define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
621 #define LINK_STATUS_FEC_MODE_MASK 0x38000000
622 #define LINK_STATUS_FEC_MODE_NONE (0 << 27)
623 #define LINK_STATUS_FEC_MODE_FIRECODE_CL74 (1 << 27)
624 #define LINK_STATUS_FEC_MODE_RS_CL91 (2 << 27)
625 #define LINK_STATUS_EXT_PHY_LINK_UP 0x40000000
628 u32 ext_phy_fw_version;
629 /* Points to struct eth_phy_cfg (For READ-ONLY) */
630 u32 drv_phy_cfg_addr;
636 struct port_mf_cfg port_mf_config;
637 struct port_stats stats;
640 #define MEDIA_UNSPECIFIED 0x0
641 #define MEDIA_SFPP_10G_FIBER 0x1 /* Use MEDIA_MODULE_FIBER instead */
642 #define MEDIA_XFP_FIBER 0x2 /* Use MEDIA_MODULE_FIBER instead */
643 #define MEDIA_DA_TWINAX 0x3
644 #define MEDIA_BASE_T 0x4
645 #define MEDIA_SFP_1G_FIBER 0x5 /* Use MEDIA_MODULE_FIBER instead */
646 #define MEDIA_MODULE_FIBER 0x6
647 #define MEDIA_KR 0xf0
648 #define MEDIA_NOT_PRESENT 0xff
651 #define LFA_LINK_FLAP_REASON_OFFSET 0
652 #define LFA_LINK_FLAP_REASON_MASK 0x000000ff
653 #define LFA_NO_REASON (0 << 0)
654 #define LFA_LINK_DOWN (1 << 0)
655 #define LFA_FORCE_INIT (1 << 1)
656 #define LFA_LOOPBACK_MISMATCH (1 << 2)
657 #define LFA_SPEED_MISMATCH (1 << 3)
658 #define LFA_FLOW_CTRL_MISMATCH (1 << 4)
659 #define LFA_ADV_SPEED_MISMATCH (1 << 5)
660 #define LINK_FLAP_AVOIDANCE_COUNT_OFFSET 8
661 #define LINK_FLAP_AVOIDANCE_COUNT_MASK 0x0000ff00
662 #define LINK_FLAP_COUNT_OFFSET 16
663 #define LINK_FLAP_COUNT_MASK 0x00ff0000
665 u32 link_change_count;
668 /* offset: 536 bytes? */
669 struct lldp_config_params_s lldp_config_params[LLDP_MAX_LLDP_AGENTS];
670 struct lldp_status_params_s lldp_status_params[LLDP_MAX_LLDP_AGENTS];
671 struct lldp_system_tlvs_buffer_s system_lldp_tlvs_buf;
673 /* DCBX related MIB */
674 struct dcbx_local_params local_admin_dcbx_mib;
675 struct dcbx_mib remote_dcbx_mib;
676 struct dcbx_mib operational_dcbx_mib;
678 /* FC_NPIV table offset & size in NVRAM value of 0 means not present */
680 u32 fc_npiv_nvram_tbl_addr;
681 u32 fc_npiv_nvram_tbl_size;
682 u32 transceiver_data;
683 #define ETH_TRANSCEIVER_STATE_MASK 0x000000FF
684 #define ETH_TRANSCEIVER_STATE_SHIFT 0x00000000
685 #define ETH_TRANSCEIVER_STATE_UNPLUGGED 0x00000000
686 #define ETH_TRANSCEIVER_STATE_PRESENT 0x00000001
687 #define ETH_TRANSCEIVER_STATE_VALID 0x00000003
688 #define ETH_TRANSCEIVER_STATE_UPDATING 0x00000008
689 #define ETH_TRANSCEIVER_TYPE_MASK 0x0000FF00
690 #define ETH_TRANSCEIVER_TYPE_SHIFT 0x00000008
691 #define ETH_TRANSCEIVER_TYPE_NONE 0x00000000
692 #define ETH_TRANSCEIVER_TYPE_UNKNOWN 0x000000FF
693 /* 1G Passive copper cable */
694 #define ETH_TRANSCEIVER_TYPE_1G_PCC 0x01
695 /* 1G Active copper cable */
696 #define ETH_TRANSCEIVER_TYPE_1G_ACC 0x02
697 #define ETH_TRANSCEIVER_TYPE_1G_LX 0x03
698 #define ETH_TRANSCEIVER_TYPE_1G_SX 0x04
699 #define ETH_TRANSCEIVER_TYPE_10G_SR 0x05
700 #define ETH_TRANSCEIVER_TYPE_10G_LR 0x06
701 #define ETH_TRANSCEIVER_TYPE_10G_LRM 0x07
702 #define ETH_TRANSCEIVER_TYPE_10G_ER 0x08
703 /* 10G Passive copper cable */
704 #define ETH_TRANSCEIVER_TYPE_10G_PCC 0x09
705 /* 10G Active copper cable */
706 #define ETH_TRANSCEIVER_TYPE_10G_ACC 0x0a
707 #define ETH_TRANSCEIVER_TYPE_XLPPI 0x0b
708 #define ETH_TRANSCEIVER_TYPE_40G_LR4 0x0c
709 #define ETH_TRANSCEIVER_TYPE_40G_SR4 0x0d
710 #define ETH_TRANSCEIVER_TYPE_40G_CR4 0x0e
711 /* Active optical cable */
712 #define ETH_TRANSCEIVER_TYPE_100G_AOC 0x0f
713 #define ETH_TRANSCEIVER_TYPE_100G_SR4 0x10
714 #define ETH_TRANSCEIVER_TYPE_100G_LR4 0x11
715 #define ETH_TRANSCEIVER_TYPE_100G_ER4 0x12
716 /* Active copper cable */
717 #define ETH_TRANSCEIVER_TYPE_100G_ACC 0x13
718 #define ETH_TRANSCEIVER_TYPE_100G_CR4 0x14
719 #define ETH_TRANSCEIVER_TYPE_4x10G_SR 0x15
720 /* 25G Passive copper cable - short */
721 #define ETH_TRANSCEIVER_TYPE_25G_CA_N 0x16
722 /* 25G Active copper cable - short */
723 #define ETH_TRANSCEIVER_TYPE_25G_ACC_S 0x17
724 /* 25G Passive copper cable - medium */
725 #define ETH_TRANSCEIVER_TYPE_25G_CA_S 0x18
726 /* 25G Active copper cable - medium */
727 #define ETH_TRANSCEIVER_TYPE_25G_ACC_M 0x19
728 /* 25G Passive copper cable - long */
729 #define ETH_TRANSCEIVER_TYPE_25G_CA_L 0x1a
730 /* 25G Active copper cable - long */
731 #define ETH_TRANSCEIVER_TYPE_25G_ACC_L 0x1b
732 #define ETH_TRANSCEIVER_TYPE_25G_SR 0x1c
733 #define ETH_TRANSCEIVER_TYPE_25G_LR 0x1d
734 #define ETH_TRANSCEIVER_TYPE_25G_AOC 0x1e
736 #define ETH_TRANSCEIVER_TYPE_4x10G 0x1f
737 #define ETH_TRANSCEIVER_TYPE_4x25G_CR 0x20
738 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_10G_40G_SR 0x30
739 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_10G_40G_CR 0x31
740 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_10G_40G_LR 0x32
741 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_SR 0x33
742 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_CR 0x34
743 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_LR 0x35
744 #define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_AOC 0x36
748 struct dcb_dscp_map dcb_dscp_map;
750 /* the status of EEE auto-negotiation
751 * bits 19:0 the configured tx-lpi entry timer value. Depends on bit 31.
752 * bits 23:20 the speeds advertised for EEE.
753 * bits 27:24 the speeds the Link partner advertised for EEE.
754 * The supported/adv. modes in bits 27:19 originate from the
755 * SHMEM_EEE_XXX_ADV definitions (where XXX is replaced by speed).
756 * bit 28 when 1'b1 EEE was requested.
757 * bit 29 when 1'b1 tx lpi was requested.
758 * bit 30 when 1'b1 EEE was negotiated. Tx lpi will be asserted if 30:29
760 * bit 31 - When 1'b0 bits 15:0 contain
761 * NVM_CFG1_PORT_EEE_POWER_SAVING_MODE_XXX define as value.
762 * When 1'b1 those bits contains a value times 16 microseconds.
765 #define EEE_TIMER_MASK 0x000fffff
766 #define EEE_ADV_STATUS_MASK 0x00f00000
767 #define EEE_1G_ADV (1 << 1)
768 #define EEE_10G_ADV (1 << 2)
769 #define EEE_ADV_STATUS_SHIFT 20
770 #define EEE_LP_ADV_STATUS_MASK 0x0f000000
771 #define EEE_LP_ADV_STATUS_SHIFT 24
772 #define EEE_REQUESTED_BIT 0x10000000
773 #define EEE_LPI_REQUESTED_BIT 0x20000000
774 #define EEE_ACTIVE_BIT 0x40000000
775 #define EEE_TIME_OUTPUT_BIT 0x80000000
777 u32 eee_remote; /* Used for EEE in LLDP */
778 #define EEE_REMOTE_TW_TX_MASK 0x0000ffff
779 #define EEE_REMOTE_TW_TX_SHIFT 0
780 #define EEE_REMOTE_TW_RX_MASK 0xffff0000
781 #define EEE_REMOTE_TW_RX_SHIFT 16
784 /**************************************/
786 /* P U B L I C F U N C */
788 /**************************************/
791 u32 iscsi_boot_signature;
792 u32 iscsi_boot_block_offset;
794 /* MTU size per funciton is needed for the OV feature */
796 /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
798 /* For PCP values 0-3 use the map lower */
799 /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
800 * 0x0000FF00 - PCP 2, 0x000000FF PCP 3
802 u32 c2s_pcp_map_lower;
803 /* For PCP values 4-7 use the map upper */
804 /* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5,
805 * 0x0000FF00 - PCP 6, 0x000000FF PCP 7
807 u32 c2s_pcp_map_upper;
809 /* For PCP default value get the MSB byte of the map default */
810 u32 c2s_pcp_map_default;
814 /* replace old mf_cfg */
817 /* function 0 of each port cannot be hidden */
818 #define FUNC_MF_CFG_FUNC_HIDE 0x00000001
819 #define FUNC_MF_CFG_PAUSE_ON_HOST_RING 0x00000002
820 #define FUNC_MF_CFG_PAUSE_ON_HOST_RING_SHIFT 0x00000001
823 #define FUNC_MF_CFG_PROTOCOL_MASK 0x000000f0
824 #define FUNC_MF_CFG_PROTOCOL_SHIFT 4
825 #define FUNC_MF_CFG_PROTOCOL_ETHERNET 0x00000000
826 #define FUNC_MF_CFG_PROTOCOL_ISCSI 0x00000010
827 #define FUNC_MF_CFG_PROTOCOL_FCOE 0x00000020
828 #define FUNC_MF_CFG_PROTOCOL_ROCE 0x00000030
829 #define FUNC_MF_CFG_PROTOCOL_MAX 0x00000030
832 /* value range - 0..100, increments in 1 % */
833 #define FUNC_MF_CFG_MIN_BW_MASK 0x0000ff00
834 #define FUNC_MF_CFG_MIN_BW_SHIFT 8
835 #define FUNC_MF_CFG_MIN_BW_DEFAULT 0x00000000
836 #define FUNC_MF_CFG_MAX_BW_MASK 0x00ff0000
837 #define FUNC_MF_CFG_MAX_BW_SHIFT 16
838 #define FUNC_MF_CFG_MAX_BW_DEFAULT 0x00640000
841 #define FUNC_STATUS_VLINK_DOWN 0x00000001
843 u32 mac_upper; /* MAC */
844 #define FUNC_MF_CFG_UPPERMAC_MASK 0x0000ffff
845 #define FUNC_MF_CFG_UPPERMAC_SHIFT 0
846 #define FUNC_MF_CFG_UPPERMAC_DEFAULT FUNC_MF_CFG_UPPERMAC_MASK
848 #define FUNC_MF_CFG_LOWERMAC_DEFAULT 0xffffffff
850 u32 fcoe_wwn_port_name_upper;
851 u32 fcoe_wwn_port_name_lower;
853 u32 fcoe_wwn_node_name_upper;
854 u32 fcoe_wwn_node_name_lower;
856 u32 ovlan_stag; /* tags */
857 #define FUNC_MF_CFG_OV_STAG_MASK 0x0000ffff
858 #define FUNC_MF_CFG_OV_STAG_SHIFT 0
859 #define FUNC_MF_CFG_OV_STAG_DEFAULT FUNC_MF_CFG_OV_STAG_MASK
861 u32 pf_allocation; /* vf per pf */
863 u32 preserve_data; /* Will be used bt CCM */
865 u32 driver_last_activity_ts;
868 * drv_ack_vf_disabled is set by the PF driver to ack handled disabled
871 u32 drv_ack_vf_disabled[VF_MAX_STATIC / 32]; /* 0x0044 */
874 #define DRV_ID_PDA_COMP_VER_MASK 0x0000ffff
875 #define DRV_ID_PDA_COMP_VER_SHIFT 0
877 #define DRV_ID_MCP_HSI_VER_MASK 0x00ff0000
878 #define DRV_ID_MCP_HSI_VER_SHIFT 16
879 #define DRV_ID_MCP_HSI_VER_CURRENT (1 << DRV_ID_MCP_HSI_VER_SHIFT)
881 #define DRV_ID_DRV_TYPE_MASK 0x7f000000
882 #define DRV_ID_DRV_TYPE_SHIFT 24
883 #define DRV_ID_DRV_TYPE_UNKNOWN (0 << DRV_ID_DRV_TYPE_SHIFT)
884 #define DRV_ID_DRV_TYPE_LINUX (1 << DRV_ID_DRV_TYPE_SHIFT)
885 #define DRV_ID_DRV_TYPE_WINDOWS (2 << DRV_ID_DRV_TYPE_SHIFT)
886 #define DRV_ID_DRV_TYPE_DIAG (3 << DRV_ID_DRV_TYPE_SHIFT)
887 #define DRV_ID_DRV_TYPE_PREBOOT (4 << DRV_ID_DRV_TYPE_SHIFT)
888 #define DRV_ID_DRV_TYPE_SOLARIS (5 << DRV_ID_DRV_TYPE_SHIFT)
889 #define DRV_ID_DRV_TYPE_VMWARE (6 << DRV_ID_DRV_TYPE_SHIFT)
890 #define DRV_ID_DRV_TYPE_FREEBSD (7 << DRV_ID_DRV_TYPE_SHIFT)
891 #define DRV_ID_DRV_TYPE_AIX (8 << DRV_ID_DRV_TYPE_SHIFT)
893 #define DRV_ID_DRV_INIT_HW_MASK 0x80000000
894 #define DRV_ID_DRV_INIT_HW_SHIFT 31
895 #define DRV_ID_DRV_INIT_HW_FLAG (1 << DRV_ID_DRV_INIT_HW_SHIFT)
898 /**************************************/
900 /* P U B L I C M B */
902 /**************************************/
903 /* This is the only section that the driver can write to, and each */
904 /* Basically each driver request to set feature parameters,
905 * will be done using a different command, which will be linked
906 * to a specific data structure from the union below.
907 * For huge strucuture, the common blank structure should be used.
911 u32 mac_upper; /* Upper 16 bits are always zeroes */
920 struct mcp_file_att {
925 struct bist_nvm_image_att {
927 u32 image_type; /* Image type */
928 u32 nvm_start_addr; /* NVM address of the image */
929 u32 len; /* Include CRC */
932 #define MCP_DRV_VER_STR_SIZE 16
933 #define MCP_DRV_VER_STR_SIZE_DWORD (MCP_DRV_VER_STR_SIZE / sizeof(u32))
934 #define MCP_DRV_NVM_BUF_LEN 32
935 struct drv_version_stc {
937 u8 name[MCP_DRV_VER_STR_SIZE - 4];
940 /* statistics for ncsi */
941 struct lan_stats_stc {
948 struct fcoe_stats_stc {
955 struct iscsi_stats_stc {
962 struct rdma_stats_stc {
969 struct ocbb_data_stc {
972 u32 ocsd_req_update_interval;
975 #define MAX_NUM_OF_SENSORS 7
976 #define MFW_SENSOR_LOCATION_INTERNAL 1
977 #define MFW_SENSOR_LOCATION_EXTERNAL 2
978 #define MFW_SENSOR_LOCATION_SFP 3
980 #define SENSOR_LOCATION_SHIFT 0
981 #define SENSOR_LOCATION_MASK 0x000000ff
982 #define THRESHOLD_HIGH_SHIFT 8
983 #define THRESHOLD_HIGH_MASK 0x0000ff00
984 #define CRITICAL_TEMPERATURE_SHIFT 16
985 #define CRITICAL_TEMPERATURE_MASK 0x00ff0000
986 #define CURRENT_TEMP_SHIFT 24
987 #define CURRENT_TEMP_MASK 0xff000000
988 struct temperature_status_stc {
990 u32 sensor[MAX_NUM_OF_SENSORS];
993 /* crash dump configuration header */
994 struct mdump_config_stc {
1002 enum resource_id_enum {
1003 RESOURCE_NUM_SB_E = 0,
1004 RESOURCE_NUM_L2_QUEUE_E = 1,
1005 RESOURCE_NUM_VPORT_E = 2,
1006 RESOURCE_NUM_VMQ_E = 3,
1007 /* Not a real resource!! it's a factor used to calculate others */
1008 RESOURCE_FACTOR_NUM_RSS_PF_E = 4,
1009 /* Not a real resource!! it's a factor used to calculate others */
1010 RESOURCE_FACTOR_RSS_PER_VF_E = 5,
1011 RESOURCE_NUM_RL_E = 6,
1012 RESOURCE_NUM_PQ_E = 7,
1013 RESOURCE_NUM_VF_E = 8,
1014 RESOURCE_VFC_FILTER_E = 9,
1015 RESOURCE_ILT_E = 10,
1016 RESOURCE_CQS_E = 11,
1017 RESOURCE_GFT_PROFILES_E = 12,
1018 RESOURCE_NUM_TC_E = 13,
1019 RESOURCE_NUM_RSS_ENGINES_E = 14,
1020 RESOURCE_LL2_QUEUE_E = 15,
1021 RESOURCE_RDMA_STATS_QUEUE_E = 16,
1023 RESOURCE_NUM_INVALID = 0xFFFFFFFF
1026 /* Resource ID is to be filled by the driver in the MB request
1027 * Size, offset & flags to be filled by the MFW in the MB response
1029 struct resource_info {
1030 enum resource_id_enum res_id;
1031 u32 size; /* number of allocated resources */
1032 u32 offset; /* Offset of the 1st resource */
1036 #define RESOURCE_ELEMENT_STRICT (1 << 0)
1039 union drv_union_data {
1040 u32 ver_str[MCP_DRV_VER_STR_SIZE_DWORD]; /* LOAD_REQ */
1041 struct mcp_mac wol_mac; /* UNLOAD_DONE */
1043 /* This configuration should be set by the driver for the LINK_SET command. */
1045 struct eth_phy_cfg drv_phy_cfg;
1047 struct mcp_val64 val64; /* For PHY / AVS commands */
1049 u8 raw_data[MCP_DRV_NVM_BUF_LEN];
1051 struct mcp_file_att file_att;
1053 u32 ack_vf_disabled[VF_MAX_STATIC / 32];
1055 struct drv_version_stc drv_version;
1057 struct lan_stats_stc lan_stats;
1058 struct fcoe_stats_stc fcoe_stats;
1059 struct iscsi_stats_stc icsci_stats;
1060 struct rdma_stats_stc rdma_stats;
1061 struct ocbb_data_stc ocbb_info;
1062 struct temperature_status_stc temp_info;
1063 struct resource_info resource;
1064 struct bist_nvm_image_att nvm_image_att;
1065 struct mdump_config_stc mdump_config;
1070 struct public_drv_mb {
1072 #define DRV_MSG_CODE_MASK 0xffff0000
1073 #define DRV_MSG_CODE_LOAD_REQ 0x10000000
1074 #define DRV_MSG_CODE_LOAD_DONE 0x11000000
1075 #define DRV_MSG_CODE_INIT_HW 0x12000000
1076 #define DRV_MSG_CODE_UNLOAD_REQ 0x20000000
1077 #define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
1078 #define DRV_MSG_CODE_INIT_PHY 0x22000000
1079 /* Params - FORCE - Reinitialize the link regardless of LFA */
1080 /* - DONT_CARE - Don't flap the link if up */
1081 #define DRV_MSG_CODE_LINK_RESET 0x23000000
1083 /* Vitaly: LLDP commands */
1084 #define DRV_MSG_CODE_SET_LLDP 0x24000000
1085 #define DRV_MSG_CODE_SET_DCBX 0x25000000
1086 /* OneView feature driver HSI*/
1087 #define DRV_MSG_CODE_OV_UPDATE_CURR_CFG 0x26000000
1088 #define DRV_MSG_CODE_OV_UPDATE_BUS_NUM 0x27000000
1089 #define DRV_MSG_CODE_OV_UPDATE_BOOT_PROGRESS 0x28000000
1090 #define DRV_MSG_CODE_OV_UPDATE_STORM_FW_VER 0x29000000
1091 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE 0x31000000
1092 #define DRV_MSG_CODE_BW_UPDATE_ACK 0x32000000
1093 #define DRV_MSG_CODE_OV_UPDATE_MTU 0x33000000
1095 #define DRV_MSG_CODE_NIG_DRAIN 0x30000000
1097 /* DRV_MB Param: driver version supp, FW_MB param: MFW version supp,
1098 * data: struct resource_info
1100 #define DRV_MSG_GET_RESOURCE_ALLOC_MSG 0x34000000
1102 /*deprecated don't use*/
1103 #define DRV_MSG_CODE_INITIATE_FLR_DEPRECATED 0x02000000
1104 #define DRV_MSG_CODE_INITIATE_PF_FLR 0x02010000
1105 #define DRV_MSG_CODE_VF_DISABLED_DONE 0xc0000000
1106 #define DRV_MSG_CODE_CFG_VF_MSIX 0xc0010000
1107 /* Param is either DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_MFW/IMAGE */
1108 #define DRV_MSG_CODE_NVM_PUT_FILE_BEGIN 0x00010000
1109 /* Param should be set to the transaction size (up to 64 bytes) */
1110 #define DRV_MSG_CODE_NVM_PUT_FILE_DATA 0x00020000
1111 /* MFW will place the file offset and len in file_att struct */
1112 #define DRV_MSG_CODE_NVM_GET_FILE_ATT 0x00030000
1113 /* Read 32bytes of nvram data. Param is [0:23] – Offset [24:31] –
1116 #define DRV_MSG_CODE_NVM_READ_NVRAM 0x00050000
1117 /* Writes up to 32Bytes to nvram. Param is [0:23] – Offset [24:31] –
1118 * Len in Bytes. In case this address is in the range of secured file in
1119 * secured mode, the operation will fail
1121 #define DRV_MSG_CODE_NVM_WRITE_NVRAM 0x00060000
1122 /* Delete a file from nvram. Param is image_type. */
1123 #define DRV_MSG_CODE_NVM_DEL_FILE 0x00080000
1124 /* Reset MCP when no NVM operation is going on, and no drivers are loaded.
1125 * In case operation succeed, MCP will not ack back.
1127 #define DRV_MSG_CODE_MCP_RESET 0x00090000
1128 /* Temporary command to set secure mode, where the param is 0 (None secure) /
1129 * 1 (Secure) / 2 (Full-Secure)
1131 #define DRV_MSG_CODE_SET_SECURE_MODE 0x000a0000
1132 /* Param: [0:15] - Address, [16:18] - lane# (0/1/2/3 - for single lane,
1133 * 4/5 - for dual lanes, 6 - for all lanes, [28] - PMD reg, [29] - select port,
1136 #define DRV_MSG_CODE_PHY_RAW_READ 0x000b0000
1137 /* Param: [0:15] - Address, [16:18] - lane# (0/1/2/3 - for single lane,
1138 * 4/5 - for dual lanes, 6 - for all lanes, [28] - PMD reg, [29] - select port,
1141 #define DRV_MSG_CODE_PHY_RAW_WRITE 0x000c0000
1142 /* Param: [0:15] - Address, [30:31] - port */
1143 #define DRV_MSG_CODE_PHY_CORE_READ 0x000d0000
1144 /* Param: [0:15] - Address, [30:31] - port */
1145 #define DRV_MSG_CODE_PHY_CORE_WRITE 0x000e0000
1146 /* Param: [0:3] - version, [4:15] - name (null terminated) */
1147 #define DRV_MSG_CODE_SET_VERSION 0x000f0000
1148 /* Halts the MCP. To resume MCP, user will need to use
1149 * MCP_REG_CPU_STATE/MCP_REG_CPU_MODE registers.
1151 #define DRV_MSG_CODE_MCP_HALT 0x00100000
1152 /* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
1153 * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
1155 #define DRV_MSG_CODE_SET_VMAC 0x00110000
1156 /* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
1157 * [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
1159 #define DRV_MSG_CODE_GET_VMAC 0x00120000
1160 #define DRV_MSG_CODE_VMAC_TYPE_MAC 1
1161 #define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
1162 #define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
1163 /* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
1164 #define DRV_MSG_CODE_GET_STATS 0x00130000
1165 #define DRV_MSG_CODE_STATS_TYPE_LAN 1
1166 #define DRV_MSG_CODE_STATS_TYPE_FCOE 2
1167 #define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
1168 #define DRV_MSG_CODE_STATS_TYPE_RDMA 4
1169 /* Host shall provide buffer and size for MFW */
1170 #define DRV_MSG_CODE_PMD_DIAG_DUMP 0x00140000
1171 /* Host shall provide buffer and size for MFW */
1172 #define DRV_MSG_CODE_PMD_DIAG_EYE 0x00150000
1173 /* Param: [0:1] - Port, [2:7] - read size, [8:15] - I2C address,
1176 #define DRV_MSG_CODE_TRANSCEIVER_READ 0x00160000
1177 /* Param: [0:1] - Port, [2:7] - write size, [8:15] - I2C address,
1180 #define DRV_MSG_CODE_TRANSCEIVER_WRITE 0x00170000
1181 /* indicate OCBB related information */
1182 #define DRV_MSG_CODE_OCBB_DATA 0x00180000
1183 /* Set function BW, params[15:8] - min, params[7:0] - max */
1184 #define DRV_MSG_CODE_SET_BW 0x00190000
1185 #define BW_MAX_MASK 0x000000ff
1186 #define BW_MAX_SHIFT 0
1187 #define BW_MIN_MASK 0x0000ff00
1188 #define BW_MIN_SHIFT 8
1190 /* When param is set to 1, all parities will be masked(disabled). When params
1191 * are set to 0, parities will be unmasked again.
1193 #define DRV_MSG_CODE_MASK_PARITIES 0x001a0000
1194 /* param[0] - Simulate fan failure, param[1] - simulate over temp. */
1195 #define DRV_MSG_CODE_INDUCE_FAILURE 0x001b0000
1196 #define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
1197 #define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
1198 /* Param: [0:15] - gpio number */
1199 #define DRV_MSG_CODE_GPIO_READ 0x001c0000
1200 /* Param: [0:15] - gpio number, [16:31] - gpio value */
1201 #define DRV_MSG_CODE_GPIO_WRITE 0x001d0000
1202 /* Param: [0:7] - test enum, [8:15] - image index, [16:31] - reserved */
1203 #define DRV_MSG_CODE_BIST_TEST 0x001e0000
1204 #define DRV_MSG_CODE_GET_TEMPERATURE 0x001f0000
1206 /* Set LED mode params :0 operational, 1 LED turn ON, 2 LED turn OFF */
1207 #define DRV_MSG_CODE_SET_LED_MODE 0x00200000
1208 /* drv_data[7:0] - EPOC in seconds, drv_data[15:8] -
1209 * driver version (MAJ MIN BUILD SUB)
1211 #define DRV_MSG_CODE_TIMESTAMP 0x00210000
1212 /* This is an empty mailbox just return OK*/
1213 #define DRV_MSG_CODE_EMPTY_MB 0x00220000
1214 /* Param[0:4] - resource number (0-31), Param[5:7] - opcode,
1217 #define DRV_MSG_CODE_RESOURCE_CMD 0x00230000
1218 /* request resource ownership with default aging */
1219 #define RESOURCE_OPCODE_REQ 1
1220 /* request resource ownership without aging */
1221 #define RESOURCE_OPCODE_REQ_WO_AGING 2
1222 /* request resource ownership with specific aging timer (in seconds) */
1223 #define RESOURCE_OPCODE_REQ_W_AGING 3
1224 #define RESOURCE_OPCODE_RELEASE 4 /* release resource */
1225 /* force resource release */
1226 #define RESOURCE_OPCODE_FORCE_RELEASE 5
1227 /* resource is free and granted to requester */
1228 #define RESOURCE_OPCODE_GNT 1
1229 /* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
1230 * 16 = MFW, 17 = diag over serial
1232 #define RESOURCE_OPCODE_BUSY 2
1233 /* indicate release request was acknowledged */
1234 #define RESOURCE_OPCODE_RELEASED 3
1235 /* indicate release request was previously received by other owner */
1236 #define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
1237 /* indicate wrong owner during release */
1238 #define RESOURCE_OPCODE_WRONG_OWNER 5
1239 #define RESOURCE_OPCODE_UNKNOWN_CMD 255
1240 /* dedicate resource 0 for dump */
1241 #define RESOURCE_DUMP (1 << 0)
1242 #define DRV_MSG_CODE_GET_MBA_VERSION 0x00240000 /* Get MBA version */
1243 /* Send crash dump commands with param[3:0] - opcode */
1244 #define DRV_MSG_CODE_MDUMP_CMD 0x00250000
1245 #define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
1246 /* acknowledge reception of error indication */
1247 #define DRV_MSG_CODE_MDUMP_ACK 0x01
1248 /* set epoc and personality as follow: drv_data[3:0] - epoch,
1249 * drv_data[7:4] - personality
1251 #define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
1252 /* trigger crash dump procedure */
1253 #define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
1254 /* Request valid logs and config words */
1255 #define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
1256 /* Set triggers mask. drv_mb_param should indicate (bitwise) which
1259 #define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
1260 /* Clear all logs */
1261 #define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06
1262 #define DRV_MSG_CODE_MEM_ECC_EVENTS 0x00260000 /* Param: None */
1263 /* Param: [0:15] - gpio number */
1264 #define DRV_MSG_CODE_GPIO_INFO 0x00270000
1265 /* Value will be placed in union */
1266 #define DRV_MSG_CODE_EXT_PHY_READ 0x00280000
1267 /* Value should be placed in union */
1268 #define DRV_MSG_CODE_EXT_PHY_WRITE 0x00290000
1269 #define DRV_MB_PARAM_ADDR_SHIFT 0
1270 #define DRV_MB_PARAM_ADDR_MASK 0x0000FFFF
1271 #define DRV_MB_PARAM_DEVAD_SHIFT 16
1272 #define DRV_MB_PARAM_DEVAD_MASK 0x001F0000
1273 #define DRV_MB_PARAM_PORT_SHIFT 21
1274 #define DRV_MB_PARAM_PORT_MASK 0x00600000
1275 #define DRV_MSG_CODE_EXT_PHY_FW_UPGRADE 0x002a0000
1277 #define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
1280 /* UNLOAD_REQ params */
1281 #define DRV_MB_PARAM_UNLOAD_WOL_UNKNOWN 0x00000000
1282 #define DRV_MB_PARAM_UNLOAD_WOL_MCP 0x00000001
1283 #define DRV_MB_PARAM_UNLOAD_WOL_DISABLED 0x00000002
1284 #define DRV_MB_PARAM_UNLOAD_WOL_ENABLED 0x00000003
1286 /* UNLOAD_DONE_params */
1287 #define DRV_MB_PARAM_UNLOAD_NON_D3_POWER 0x00000001
1289 /* INIT_PHY params */
1290 #define DRV_MB_PARAM_INIT_PHY_FORCE 0x00000001
1291 #define DRV_MB_PARAM_INIT_PHY_DONT_CARE 0x00000002
1293 /* LLDP / DCBX params*/
1294 #define DRV_MB_PARAM_LLDP_SEND_MASK 0x00000001
1295 #define DRV_MB_PARAM_LLDP_SEND_SHIFT 0
1296 #define DRV_MB_PARAM_LLDP_AGENT_MASK 0x00000006
1297 #define DRV_MB_PARAM_LLDP_AGENT_SHIFT 1
1298 #define DRV_MB_PARAM_DCBX_NOTIFY_MASK 0x00000008
1299 #define DRV_MB_PARAM_DCBX_NOTIFY_SHIFT 3
1301 #define DRV_MB_PARAM_NIG_DRAIN_PERIOD_MS_MASK 0x000000FF
1302 #define DRV_MB_PARAM_NIG_DRAIN_PERIOD_MS_SHIFT 0
1304 #define DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_MFW 0x1
1305 #define DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_IMAGE 0x2
1307 #define DRV_MB_PARAM_NVM_OFFSET_SHIFT 0
1308 #define DRV_MB_PARAM_NVM_OFFSET_MASK 0x00FFFFFF
1309 #define DRV_MB_PARAM_NVM_LEN_SHIFT 24
1310 #define DRV_MB_PARAM_NVM_LEN_MASK 0xFF000000
1312 #define DRV_MB_PARAM_PHY_ADDR_SHIFT 0
1313 #define DRV_MB_PARAM_PHY_ADDR_MASK 0x1FF0FFFF
1314 #define DRV_MB_PARAM_PHY_LANE_SHIFT 16
1315 #define DRV_MB_PARAM_PHY_LANE_MASK 0x000F0000
1316 #define DRV_MB_PARAM_PHY_SELECT_PORT_SHIFT 29
1317 #define DRV_MB_PARAM_PHY_SELECT_PORT_MASK 0x20000000
1318 #define DRV_MB_PARAM_PHY_PORT_SHIFT 30
1319 #define DRV_MB_PARAM_PHY_PORT_MASK 0xc0000000
1321 #define DRV_MB_PARAM_PHYMOD_LANE_SHIFT 0
1322 #define DRV_MB_PARAM_PHYMOD_LANE_MASK 0x000000FF
1323 #define DRV_MB_PARAM_PHYMOD_SIZE_SHIFT 8
1324 #define DRV_MB_PARAM_PHYMOD_SIZE_MASK 0x000FFF00
1325 /* configure vf MSIX params*/
1326 #define DRV_MB_PARAM_CFG_VF_MSIX_VF_ID_SHIFT 0
1327 #define DRV_MB_PARAM_CFG_VF_MSIX_VF_ID_MASK 0x000000FF
1328 #define DRV_MB_PARAM_CFG_VF_MSIX_SB_NUM_SHIFT 8
1329 #define DRV_MB_PARAM_CFG_VF_MSIX_SB_NUM_MASK 0x0000FF00
1331 /* OneView configuration parametres */
1332 #define DRV_MB_PARAM_OV_CURR_CFG_SHIFT 0
1333 #define DRV_MB_PARAM_OV_CURR_CFG_MASK 0x0000000F
1334 #define DRV_MB_PARAM_OV_CURR_CFG_NONE 0
1335 #define DRV_MB_PARAM_OV_CURR_CFG_OS 1
1336 #define DRV_MB_PARAM_OV_CURR_CFG_VENDOR_SPEC 2
1337 #define DRV_MB_PARAM_OV_CURR_CFG_OTHER 3
1338 #define DRV_MB_PARAM_OV_CURR_CFG_VC_CLP 4
1339 #define DRV_MB_PARAM_OV_CURR_CFG_CNU 5
1340 #define DRV_MB_PARAM_OV_CURR_CFG_DCI 6
1341 #define DRV_MB_PARAM_OV_CURR_CFG_HII 7
1343 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_SHIFT 0
1344 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_MASK 0x000000FF
1345 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_NONE (1 << 0)
1346 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_ISCSI_IP_ACQUIRED (1 << 1)
1347 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_FCOE_FABRIC_LOGIN_SUCCESS (1 << 1)
1348 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_TRARGET_FOUND (1 << 2)
1349 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_ISCSI_CHAP_SUCCESS (1 << 3)
1350 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_FCOE_LUN_FOUND (1 << 3)
1351 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_LOGGED_INTO_TGT (1 << 4)
1352 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_IMG_DOWNLOADED (1 << 5)
1353 #define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_OS_HANDOFF (1 << 6)
1354 #define DRV_MB_PARAM_OV_UPDATE_BOOT_COMPLETED 0
1356 #define DRV_MB_PARAM_OV_PCI_BUS_NUM_SHIFT 0
1357 #define DRV_MB_PARAM_OV_PCI_BUS_NUM_MASK 0x000000FF
1359 #define DRV_MB_PARAM_OV_STORM_FW_VER_SHIFT 0
1360 #define DRV_MB_PARAM_OV_STORM_FW_VER_MASK 0xFFFFFFFF
1361 #define DRV_MB_PARAM_OV_STORM_FW_VER_MAJOR_MASK 0xFF000000
1362 #define DRV_MB_PARAM_OV_STORM_FW_VER_MINOR_MASK 0x00FF0000
1363 #define DRV_MB_PARAM_OV_STORM_FW_VER_BUILD_MASK 0x0000FF00
1364 #define DRV_MB_PARAM_OV_STORM_FW_VER_DROP_MASK 0x000000FF
1366 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_SHIFT 0
1367 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_MASK 0xF
1368 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_UNKNOWN 0x1
1370 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_NOT_LOADED 0x2
1371 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_LOADING 0x3
1372 /* installed but disabled by user/admin/OS */
1373 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_DISABLED 0x4
1374 /* installed and active */
1375 #define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_ACTIVE 0x5
1377 #define DRV_MB_PARAM_OV_MTU_SIZE_SHIFT 0
1378 #define DRV_MB_PARAM_OV_MTU_SIZE_MASK 0xFFFFFFFF
1380 #define DRV_MB_PARAM_SET_LED_MODE_OPER 0x0
1381 #define DRV_MB_PARAM_SET_LED_MODE_ON 0x1
1382 #define DRV_MB_PARAM_SET_LED_MODE_OFF 0x2
1384 #define DRV_MB_PARAM_TRANSCEIVER_PORT_SHIFT 0
1385 #define DRV_MB_PARAM_TRANSCEIVER_PORT_MASK 0x00000003
1386 #define DRV_MB_PARAM_TRANSCEIVER_SIZE_SHIFT 2
1387 #define DRV_MB_PARAM_TRANSCEIVER_SIZE_MASK 0x000000FC
1388 #define DRV_MB_PARAM_TRANSCEIVER_I2C_ADDRESS_SHIFT 8
1389 #define DRV_MB_PARAM_TRANSCEIVER_I2C_ADDRESS_MASK 0x0000FF00
1390 #define DRV_MB_PARAM_TRANSCEIVER_OFFSET_SHIFT 16
1391 #define DRV_MB_PARAM_TRANSCEIVER_OFFSET_MASK 0xFFFF0000
1393 #define DRV_MB_PARAM_GPIO_NUMBER_SHIFT 0
1394 #define DRV_MB_PARAM_GPIO_NUMBER_MASK 0x0000FFFF
1395 #define DRV_MB_PARAM_GPIO_VALUE_SHIFT 16
1396 #define DRV_MB_PARAM_GPIO_VALUE_MASK 0xFFFF0000
1397 #define DRV_MB_PARAM_GPIO_DIRECTION_SHIFT 16
1398 #define DRV_MB_PARAM_GPIO_DIRECTION_MASK 0x00FF0000
1399 #define DRV_MB_PARAM_GPIO_CTRL_SHIFT 24
1400 #define DRV_MB_PARAM_GPIO_CTRL_MASK 0xFF000000
1402 /* Resource Allocation params - Driver version support*/
1403 #define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_MASK 0xFFFF0000
1404 #define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_SHIFT 16
1405 #define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_MASK 0x0000FFFF
1406 #define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_SHIFT 0
1408 #define DRV_MB_PARAM_BIST_UNKNOWN_TEST 0
1409 #define DRV_MB_PARAM_BIST_REGISTER_TEST 1
1410 #define DRV_MB_PARAM_BIST_CLOCK_TEST 2
1411 #define DRV_MB_PARAM_BIST_NVM_TEST_NUM_IMAGES 3
1412 #define DRV_MB_PARAM_BIST_NVM_TEST_IMAGE_BY_INDEX 4
1414 #define DRV_MB_PARAM_BIST_RC_UNKNOWN 0
1415 #define DRV_MB_PARAM_BIST_RC_PASSED 1
1416 #define DRV_MB_PARAM_BIST_RC_FAILED 2
1417 #define DRV_MB_PARAM_BIST_RC_INVALID_PARAMETER 3
1419 #define DRV_MB_PARAM_BIST_TEST_INDEX_SHIFT 0
1420 #define DRV_MB_PARAM_BIST_TEST_INDEX_MASK 0x000000FF
1421 #define DRV_MB_PARAM_BIST_TEST_IMAGE_INDEX_SHIFT 8
1422 #define DRV_MB_PARAM_BIST_TEST_IMAGE_INDEX_MASK 0x0000FF00
1425 #define FW_MSG_CODE_MASK 0xffff0000
1426 #define FW_MSG_CODE_DRV_LOAD_ENGINE 0x10100000
1427 #define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000
1428 #define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000
1429 #define FW_MSG_CODE_DRV_LOAD_REFUSED_PDA 0x10200000
1430 #define FW_MSG_CODE_DRV_LOAD_REFUSED_HSI 0x10210000
1431 #define FW_MSG_CODE_DRV_LOAD_REFUSED_DIAG 0x10220000
1432 #define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000
1433 #define FW_MSG_CODE_DRV_UNLOAD_ENGINE 0x20110000
1434 #define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20120000
1435 #define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20130000
1436 #define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000
1437 #define FW_MSG_CODE_INIT_PHY_DONE 0x21200000
1438 #define FW_MSG_CODE_INIT_PHY_ERR_INVALID_ARGS 0x21300000
1439 #define FW_MSG_CODE_LINK_RESET_DONE 0x23000000
1440 #define FW_MSG_CODE_SET_LLDP_DONE 0x24000000
1441 #define FW_MSG_CODE_SET_LLDP_UNSUPPORTED_AGENT 0x24010000
1442 #define FW_MSG_CODE_SET_DCBX_DONE 0x25000000
1443 #define FW_MSG_CODE_UPDATE_CURR_CFG_DONE 0x26000000
1444 #define FW_MSG_CODE_UPDATE_BUS_NUM_DONE 0x27000000
1445 #define FW_MSG_CODE_UPDATE_BOOT_PROGRESS_DONE 0x28000000
1446 #define FW_MSG_CODE_UPDATE_STORM_FW_VER_DONE 0x29000000
1447 #define FW_MSG_CODE_UPDATE_DRIVER_STATE_DONE 0x31000000
1448 #define FW_MSG_CODE_DRV_MSG_CODE_BW_UPDATE_DONE 0x32000000
1449 #define FW_MSG_CODE_DRV_MSG_CODE_MTU_SIZE_DONE 0x33000000
1450 #define FW_MSG_CODE_RESOURCE_ALLOC_OK 0x34000000
1451 #define FW_MSG_CODE_RESOURCE_ALLOC_UNKNOWN 0x35000000
1452 #define FW_MSG_CODE_RESOURCE_ALLOC_DEPRECATED 0x36000000
1453 #define FW_MSG_CODE_RESOURCE_ALLOC_GEN_ERR 0x37000000
1454 #define FW_MSG_CODE_NIG_DRAIN_DONE 0x30000000
1455 #define FW_MSG_CODE_VF_DISABLED_DONE 0xb0000000
1456 #define FW_MSG_CODE_DRV_CFG_VF_MSIX_DONE 0xb0010000
1457 #define FW_MSG_CODE_FLR_ACK 0x02000000
1458 #define FW_MSG_CODE_FLR_NACK 0x02100000
1459 #define FW_MSG_CODE_SET_DRIVER_DONE 0x02200000
1460 #define FW_MSG_CODE_SET_VMAC_SUCCESS 0x02300000
1461 #define FW_MSG_CODE_SET_VMAC_FAIL 0x02400000
1463 #define FW_MSG_CODE_NVM_OK 0x00010000
1464 #define FW_MSG_CODE_NVM_INVALID_MODE 0x00020000
1465 #define FW_MSG_CODE_NVM_PREV_CMD_WAS_NOT_FINISHED 0x00030000
1466 #define FW_MSG_CODE_NVM_FAILED_TO_ALLOCATE_PAGE 0x00040000
1467 #define FW_MSG_CODE_NVM_INVALID_DIR_FOUND 0x00050000
1468 #define FW_MSG_CODE_NVM_PAGE_NOT_FOUND 0x00060000
1469 #define FW_MSG_CODE_NVM_FAILED_PARSING_BNDLE_HEADER 0x00070000
1470 #define FW_MSG_CODE_NVM_FAILED_PARSING_IMAGE_HEADER 0x00080000
1471 #define FW_MSG_CODE_NVM_PARSING_OUT_OF_SYNC 0x00090000
1472 #define FW_MSG_CODE_NVM_FAILED_UPDATING_DIR 0x000a0000
1473 #define FW_MSG_CODE_NVM_FAILED_TO_FREE_PAGE 0x000b0000
1474 #define FW_MSG_CODE_NVM_FILE_NOT_FOUND 0x000c0000
1475 #define FW_MSG_CODE_NVM_OPERATION_FAILED 0x000d0000
1476 #define FW_MSG_CODE_NVM_FAILED_UNALIGNED 0x000e0000
1477 #define FW_MSG_CODE_NVM_BAD_OFFSET 0x000f0000
1478 #define FW_MSG_CODE_NVM_BAD_SIGNATURE 0x00100000
1479 #define FW_MSG_CODE_NVM_FILE_READ_ONLY 0x00200000
1480 #define FW_MSG_CODE_NVM_UNKNOWN_FILE 0x00300000
1481 #define FW_MSG_CODE_NVM_PUT_FILE_FINISH_OK 0x00400000
1482 /* MFW reject "mcp reset" command if one of the drivers is up */
1483 #define FW_MSG_CODE_MCP_RESET_REJECT 0x00600000
1484 #define FW_MSG_CODE_PHY_OK 0x00110000
1485 #define FW_MSG_CODE_PHY_ERROR 0x00120000
1486 #define FW_MSG_CODE_SET_SECURE_MODE_ERROR 0x00130000
1487 #define FW_MSG_CODE_SET_SECURE_MODE_OK 0x00140000
1488 #define FW_MSG_MODE_PHY_PRIVILEGE_ERROR 0x00150000
1489 #define FW_MSG_CODE_OK 0x00160000
1490 #define FW_MSG_CODE_LED_MODE_INVALID 0x00170000
1491 #define FW_MSG_CODE_PHY_DIAG_OK 0x00160000
1492 #define FW_MSG_CODE_PHY_DIAG_ERROR 0x00170000
1493 #define FW_MSG_CODE_INIT_HW_FAILED_TO_ALLOCATE_PAGE 0x00040000
1494 #define FW_MSG_CODE_INIT_HW_FAILED_BAD_STATE 0x00170000
1495 #define FW_MSG_CODE_INIT_HW_FAILED_TO_SET_WINDOW 0x000d0000
1496 #define FW_MSG_CODE_INIT_HW_FAILED_NO_IMAGE 0x000c0000
1497 #define FW_MSG_CODE_INIT_HW_FAILED_VERSION_MISMATCH 0x00100000
1498 #define FW_MSG_CODE_TRANSCEIVER_DIAG_OK 0x00160000
1499 #define FW_MSG_CODE_TRANSCEIVER_DIAG_ERROR 0x00170000
1500 #define FW_MSG_CODE_TRANSCEIVER_NOT_PRESENT 0x00020000
1501 #define FW_MSG_CODE_TRANSCEIVER_BAD_BUFFER_SIZE 0x000f0000
1502 #define FW_MSG_CODE_GPIO_OK 0x00160000
1503 #define FW_MSG_CODE_GPIO_DIRECTION_ERR 0x00170000
1504 #define FW_MSG_CODE_GPIO_CTRL_ERR 0x00020000
1505 #define FW_MSG_CODE_GPIO_INVALID 0x000f0000
1506 #define FW_MSG_CODE_GPIO_INVALID_VALUE 0x00050000
1507 #define FW_MSG_CODE_BIST_TEST_INVALID 0x000f0000
1508 #define FW_MSG_CODE_EXTPHY_INVALID_IMAGE_HEADER 0x00700000
1509 #define FW_MSG_CODE_EXTPHY_INVALID_PHY_TYPE 0x00710000
1510 #define FW_MSG_CODE_EXTPHY_OPERATION_FAILED 0x00720000
1511 #define FW_MSG_CODE_EXTPHY_NO_PHY_DETECTED 0x00730000
1513 /* mdump related response codes */
1514 #define FW_MSG_CODE_MDUMP_NO_IMAGE_FOUND 0x00010000
1515 #define FW_MSG_CODE_MDUMP_ALLOC_FAILED 0x00020000
1516 #define FW_MSG_CODE_MDUMP_INVALID_CMD 0x00030000
1517 #define FW_MSG_CODE_MDUMP_IN_PROGRESS 0x00040000
1518 #define FW_MSG_CODE_MDUMP_WRITE_FAILED 0x00050000
1520 #define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
1524 /* Resource Allocation params - MFW version support*/
1525 #define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_MASK 0xFFFF0000
1526 #define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_SHIFT 16
1527 #define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_MASK 0x0000FFFF
1528 #define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_SHIFT 0
1532 #define DRV_PULSE_SEQ_MASK 0x00007fff
1533 #define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000
1535 * The system time is in the format of
1536 * (year-2001)*12*32 + month*32 + day.
1538 #define DRV_PULSE_ALWAYS_ALIVE 0x00008000
1540 * Indicate to the firmware not to go into the
1541 * OS-absent when it is not getting driver pulse.
1542 * This is used for debugging as well for PXE(MBA).
1546 #define MCP_PULSE_SEQ_MASK 0x00007fff
1547 #define MCP_PULSE_ALWAYS_ALIVE 0x00008000
1548 /* Indicates to the driver not to assert due to lack
1551 #define MCP_EVENT_MASK 0xffff0000
1552 #define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
1554 /* The union data is used by the driver to pass parameters to the scratchpad. */
1556 union drv_union_data union_data;
1561 /**********************************************************************
1563 * Incremental Aggregative
1564 * 8-bit MFW counter per message
1565 * 8-bit ack-counter per message
1567 * Provides up to 256 aggregative message per type
1568 * Provides 4 message types in dword
1569 * Message type pointers to byte offset
1570 * Backward Compatibility by using sizeof for the counters.
1571 * No lock requires for 32bit messages
1573 * In case of messages greater than 32bit, a dedicated mechanism(e.g lock)
1574 * is required to prevent data corruption.
1575 **********************************************************************/
1576 enum MFW_DRV_MSG_TYPE {
1577 MFW_DRV_MSG_LINK_CHANGE,
1578 MFW_DRV_MSG_FLR_FW_ACK_FAILED,
1579 MFW_DRV_MSG_VF_DISABLED,
1580 MFW_DRV_MSG_LLDP_DATA_UPDATED,
1581 MFW_DRV_MSG_DCBX_REMOTE_MIB_UPDATED,
1582 MFW_DRV_MSG_DCBX_OPERATIONAL_MIB_UPDATED,
1583 MFW_DRV_MSG_ERROR_RECOVERY,
1584 MFW_DRV_MSG_BW_UPDATE,
1585 MFW_DRV_MSG_S_TAG_UPDATE,
1586 MFW_DRV_MSG_GET_LAN_STATS,
1587 MFW_DRV_MSG_GET_FCOE_STATS,
1588 MFW_DRV_MSG_GET_ISCSI_STATS,
1589 MFW_DRV_MSG_GET_RDMA_STATS,
1590 MFW_DRV_MSG_FAILURE_DETECTED,
1591 MFW_DRV_MSG_TRANSCEIVER_STATE_CHANGE,
1592 MFW_DRV_MSG_CRITICAL_ERROR_OCCURRED,
1593 MFW_DRV_MSG_EEE_NEGOTIATION_COMPLETE,
1597 #define MFW_DRV_MSG_MAX_DWORDS(msgs) (((msgs - 1) >> 2) + 1)
1598 #define MFW_DRV_MSG_DWORD(msg_id) (msg_id >> 2)
1599 #define MFW_DRV_MSG_OFFSET(msg_id) ((msg_id & 0x3) << 3)
1600 #define MFW_DRV_MSG_MASK(msg_id) (0xff << MFW_DRV_MSG_OFFSET(msg_id))
1602 #ifdef BIG_ENDIAN /* Like MFW */
1603 #define DRV_ACK_MSG(msg_p, msg_id) \
1604 ((u8)((u8 *)msg_p)[msg_id]++;)
1606 #define DRV_ACK_MSG(msg_p, msg_id) \
1607 ((u8)((u8 *)msg_p)[((msg_id & ~3) | ((~msg_id) & 3))]++;)
1610 #define MFW_DRV_UPDATE(shmem_func, msg_id) \
1611 ((u8)((u8 *)(MFW_MB_P(shmem_func)->msg))[msg_id]++;)
1613 struct public_mfw_mb {
1614 u32 sup_msgs; /* Assigend with MFW_DRV_MSG_MAX */
1615 /* Incremented by the MFW */
1616 u32 msg[MFW_DRV_MSG_MAX_DWORDS(MFW_DRV_MSG_MAX)];
1617 /* Incremented by the driver */
1618 u32 ack[MFW_DRV_MSG_MAX_DWORDS(MFW_DRV_MSG_MAX)];
1621 /**************************************/
1623 /* P U B L I C D A T A */
1625 /**************************************/
1626 enum public_sections {
1627 PUBLIC_DRV_MB, /* Points to the first drv_mb of path0 */
1628 PUBLIC_MFW_MB, /* Points to the first mfw_mb of path0 */
1636 struct drv_ver_info_stc {
1641 /* Runtime data needs about 1/2K. We use 2K to be on the safe side.
1642 * Please make sure data does not exceed this size.
1644 #define NUM_RUNTIME_DWORDS 16
1645 struct drv_init_hw_stc {
1646 u32 init_hw_bitmask[NUM_RUNTIME_DWORDS];
1647 u32 init_hw_data[NUM_RUNTIME_DWORDS * 32];
1650 struct mcp_public_data {
1651 /* The sections fields is an array */
1653 offsize_t sections[PUBLIC_MAX_SECTIONS];
1654 struct public_drv_mb drv_mb[MCP_GLOB_FUNC_MAX];
1655 struct public_mfw_mb mfw_mb[MCP_GLOB_FUNC_MAX];
1656 struct public_global global;
1657 struct public_path path[MCP_GLOB_PATH_MAX];
1658 struct public_port port[MCP_GLOB_PORT_MAX];
1659 struct public_func func[MCP_GLOB_FUNC_MAX];
1662 #define I2C_TRANSCEIVER_ADDR 0xa0
1663 #define MAX_I2C_TRANSACTION_SIZE 16
1664 #define MAX_I2C_TRANSCEIVER_PAGE_SIZE 256
1666 #endif /* MCP_PUBLIC_H */