4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 #include <sys/types.h>
39 #include <sys/param.h>
41 #include <sys/queue.h>
46 #include <rte_common.h>
47 #include <rte_byteorder.h>
49 #include <rte_memory.h>
50 #include <rte_memcpy.h>
51 #include <rte_memzone.h>
53 #include <rte_per_lcore.h>
54 #include <rte_launch.h>
55 #include <rte_atomic.h>
56 #include <rte_cycles.h>
57 #include <rte_prefetch.h>
58 #include <rte_lcore.h>
59 #include <rte_per_lcore.h>
60 #include <rte_branch_prediction.h>
61 #include <rte_interrupts.h>
63 #include <rte_random.h>
64 #include <rte_debug.h>
65 #include <rte_ether.h>
66 #include <rte_ethdev.h>
68 #include <rte_mempool.h>
73 #include <rte_string_fns.h>
75 #include <rte_ip_frag.h>
77 #define RTE_LOGTYPE_IP_FRAG RTE_LOGTYPE_USER1
79 #define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
81 /* allow max jumbo frame 9.5 KB */
82 #define JUMBO_FRAME_MAX_SIZE 0x2600
84 #define ROUNDUP_DIV(a, b) (((a) + (b) - 1) / (b))
87 * Default byte size for the IPv6 Maximum Transfer Unit (MTU).
88 * This value includes the size of IPv6 header.
90 #define IPV4_MTU_DEFAULT ETHER_MTU
91 #define IPV6_MTU_DEFAULT ETHER_MTU
94 * Default payload in bytes for the IPv6 packet.
96 #define IPV4_DEFAULT_PAYLOAD (IPV4_MTU_DEFAULT - sizeof(struct ipv4_hdr))
97 #define IPV6_DEFAULT_PAYLOAD (IPV6_MTU_DEFAULT - sizeof(struct ipv6_hdr))
100 * Max number of fragments per packet expected - defined by config file.
102 #define MAX_PACKET_FRAG RTE_LIBRTE_IP_FRAG_MAX_FRAG
106 #define MAX_PKT_BURST 32
107 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
109 /* Configure how many packets ahead to prefetch, when reading packets */
110 #define PREFETCH_OFFSET 3
113 * Configurable number of RX/TX ring descriptors
115 #define RTE_TEST_RX_DESC_DEFAULT 128
116 #define RTE_TEST_TX_DESC_DEFAULT 512
117 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
118 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
120 /* ethernet addresses of ports */
121 static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
124 #define IPv4_BYTES_FMT "%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8
125 #define IPv4_BYTES(addr) \
126 (uint8_t) (((addr) >> 24) & 0xFF),\
127 (uint8_t) (((addr) >> 16) & 0xFF),\
128 (uint8_t) (((addr) >> 8) & 0xFF),\
129 (uint8_t) ((addr) & 0xFF)
133 #define IPv6_BYTES_FMT "%02x%02x:%02x%02x:%02x%02x:%02x%02x:"\
134 "%02x%02x:%02x%02x:%02x%02x:%02x%02x"
135 #define IPv6_BYTES(addr) \
136 addr[0], addr[1], addr[2], addr[3], \
137 addr[4], addr[5], addr[6], addr[7], \
138 addr[8], addr[9], addr[10], addr[11],\
139 addr[12], addr[13],addr[14], addr[15]
142 #define IPV6_ADDR_LEN 16
144 /* mask of enabled ports */
145 static int enabled_port_mask = 0;
147 static int rx_queue_per_lcore = 1;
149 #define MBUF_TABLE_SIZE (2 * MAX(MAX_PKT_BURST, MAX_PACKET_FRAG))
153 struct rte_mbuf *m_table[MBUF_TABLE_SIZE];
157 struct rte_mempool *direct_pool;
158 struct rte_mempool *indirect_pool;
160 struct rte_lpm6 *lpm6;
164 #define MAX_RX_QUEUE_PER_LCORE 16
165 #define MAX_TX_QUEUE_PER_PORT 16
166 struct lcore_queue_conf {
168 uint16_t tx_queue_id[RTE_MAX_ETHPORTS];
169 struct rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
170 struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
171 } __rte_cache_aligned;
172 struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
174 static const struct rte_eth_conf port_conf = {
176 .max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
178 .header_split = 0, /**< Header Split disabled */
179 .hw_ip_checksum = 1, /**< IP checksum offload enabled */
180 .hw_vlan_filter = 0, /**< VLAN filtering disabled */
181 .jumbo_frame = 1, /**< Jumbo Frame Support enabled */
182 .hw_strip_crc = 0, /**< CRC stripped by hardware */
185 .mq_mode = ETH_MQ_TX_NONE,
190 * IPv4 forwarding table
192 struct l3fwd_ipv4_route {
198 struct l3fwd_ipv4_route l3fwd_ipv4_route_array[] = {
199 {IPv4(100,10,0,0), 16, 0},
200 {IPv4(100,20,0,0), 16, 1},
201 {IPv4(100,30,0,0), 16, 2},
202 {IPv4(100,40,0,0), 16, 3},
203 {IPv4(100,50,0,0), 16, 4},
204 {IPv4(100,60,0,0), 16, 5},
205 {IPv4(100,70,0,0), 16, 6},
206 {IPv4(100,80,0,0), 16, 7},
210 * IPv6 forwarding table
213 struct l3fwd_ipv6_route {
214 uint8_t ip[IPV6_ADDR_LEN];
219 static struct l3fwd_ipv6_route l3fwd_ipv6_route_array[] = {
220 {{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 0},
221 {{2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 1},
222 {{3,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 2},
223 {{4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 3},
224 {{5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 4},
225 {{6,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 5},
226 {{7,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 6},
227 {{8,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 7},
230 #define LPM_MAX_RULES 1024
231 #define LPM6_MAX_RULES 1024
232 #define LPM6_NUMBER_TBL8S (1 << 16)
234 struct rte_lpm6_config lpm6_config = {
235 .max_rules = LPM6_MAX_RULES,
236 .number_tbl8s = LPM6_NUMBER_TBL8S,
240 static struct rte_mempool *socket_direct_pool[RTE_MAX_NUMA_NODES];
241 static struct rte_mempool *socket_indirect_pool[RTE_MAX_NUMA_NODES];
242 static struct rte_lpm *socket_lpm[RTE_MAX_NUMA_NODES];
243 static struct rte_lpm6 *socket_lpm6[RTE_MAX_NUMA_NODES];
245 /* Send burst of packets on an output interface */
247 send_burst(struct lcore_queue_conf *qconf, uint16_t n, uint8_t port)
249 struct rte_mbuf **m_table;
253 queueid = qconf->tx_queue_id[port];
254 m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
256 ret = rte_eth_tx_burst(port, queueid, m_table, n);
257 if (unlikely(ret < n)) {
259 rte_pktmbuf_free(m_table[ret]);
267 l3fwd_simple_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf,
268 uint8_t queueid, uint8_t port_in)
270 struct rx_queue *rxq;
272 uint8_t next_hop, port_out, ipv6;
276 rxq = &qconf->rx_queue_list[queueid];
278 /* by default, send everything back to the source port */
281 /* Remove the Ethernet header and trailer from the input packet */
282 rte_pktmbuf_adj(m, (uint16_t)sizeof(struct ether_hdr));
284 /* Build transmission burst */
285 len = qconf->tx_mbufs[port_out].len;
287 /* if this is an IPv4 packet */
288 if (m->ol_flags & PKT_RX_IPV4_HDR) {
289 struct ipv4_hdr *ip_hdr;
291 /* Read the lookup key (i.e. ip_dst) from the input packet */
292 ip_hdr = rte_pktmbuf_mtod(m, struct ipv4_hdr *);
293 ip_dst = rte_be_to_cpu_32(ip_hdr->dst_addr);
295 /* Find destination port */
296 if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop) == 0 &&
297 (enabled_port_mask & 1 << next_hop) != 0) {
300 /* Build transmission burst for new port */
301 len = qconf->tx_mbufs[port_out].len;
304 /* if we don't need to do any fragmentation */
305 if (likely (IPV4_MTU_DEFAULT >= m->pkt_len)) {
306 qconf->tx_mbufs[port_out].m_table[len] = m;
309 len2 = rte_ipv4_fragment_packet(m,
310 &qconf->tx_mbufs[port_out].m_table[len],
311 (uint16_t)(MBUF_TABLE_SIZE - len),
313 rxq->direct_pool, rxq->indirect_pool);
315 /* Free input packet */
318 /* If we fail to fragment the packet */
319 if (unlikely (len2 < 0))
323 /* if this is an IPv6 packet */
324 else if (m->ol_flags & PKT_RX_IPV6_HDR) {
325 struct ipv6_hdr *ip_hdr;
329 /* Read the lookup key (i.e. ip_dst) from the input packet */
330 ip_hdr = rte_pktmbuf_mtod(m, struct ipv6_hdr *);
332 /* Find destination port */
333 if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr, &next_hop) == 0 &&
334 (enabled_port_mask & 1 << next_hop) != 0) {
337 /* Build transmission burst for new port */
338 len = qconf->tx_mbufs[port_out].len;
341 /* if we don't need to do any fragmentation */
342 if (likely (IPV6_MTU_DEFAULT >= m->pkt_len)) {
343 qconf->tx_mbufs[port_out].m_table[len] = m;
346 len2 = rte_ipv6_fragment_packet(m,
347 &qconf->tx_mbufs[port_out].m_table[len],
348 (uint16_t)(MBUF_TABLE_SIZE - len),
350 rxq->direct_pool, rxq->indirect_pool);
352 /* Free input packet */
355 /* If we fail to fragment the packet */
356 if (unlikely (len2 < 0))
360 /* else, just forward the packet */
362 qconf->tx_mbufs[port_out].m_table[len] = m;
366 for (i = len; i < len + len2; i ++) {
369 m = qconf->tx_mbufs[port_out].m_table[i];
370 struct ether_hdr *eth_hdr = (struct ether_hdr *)
371 rte_pktmbuf_prepend(m, (uint16_t)sizeof(struct ether_hdr));
372 if (eth_hdr == NULL) {
373 rte_panic("No headroom in mbuf.\n");
376 m->l2_len = sizeof(struct ether_hdr);
378 /* 02:00:00:00:00:xx */
379 d_addr_bytes = ð_hdr->d_addr.addr_bytes[0];
380 *((uint64_t *)d_addr_bytes) = 0x000000000002 + ((uint64_t)port_out << 40);
383 ether_addr_copy(&ports_eth_addr[port_out], ð_hdr->s_addr);
385 eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv6);
387 eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv4);
392 if (likely(len < MAX_PKT_BURST)) {
393 qconf->tx_mbufs[port_out].len = (uint16_t)len;
397 /* Transmit packets */
398 send_burst(qconf, (uint16_t)len, port_out);
399 qconf->tx_mbufs[port_out].len = 0;
402 /* main processing loop */
404 main_loop(__attribute__((unused)) void *dummy)
406 struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
408 uint64_t prev_tsc, diff_tsc, cur_tsc;
411 struct lcore_queue_conf *qconf;
412 const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
416 lcore_id = rte_lcore_id();
417 qconf = &lcore_queue_conf[lcore_id];
419 if (qconf->n_rx_queue == 0) {
420 RTE_LOG(INFO, IP_FRAG, "lcore %u has nothing to do\n", lcore_id);
424 RTE_LOG(INFO, IP_FRAG, "entering main loop on lcore %u\n", lcore_id);
426 for (i = 0; i < qconf->n_rx_queue; i++) {
428 portid = qconf->rx_queue_list[i].portid;
429 RTE_LOG(INFO, IP_FRAG, " -- lcoreid=%u portid=%d\n", lcore_id,
435 cur_tsc = rte_rdtsc();
438 * TX burst queue drain
440 diff_tsc = cur_tsc - prev_tsc;
441 if (unlikely(diff_tsc > drain_tsc)) {
444 * This could be optimized (use queueid instead of
445 * portid), but it is not called so often
447 for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
448 if (qconf->tx_mbufs[portid].len == 0)
450 send_burst(&lcore_queue_conf[lcore_id],
451 qconf->tx_mbufs[portid].len,
453 qconf->tx_mbufs[portid].len = 0;
460 * Read packet from RX queues
462 for (i = 0; i < qconf->n_rx_queue; i++) {
464 portid = qconf->rx_queue_list[i].portid;
465 nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
468 /* Prefetch first packets */
469 for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
470 rte_prefetch0(rte_pktmbuf_mtod(
471 pkts_burst[j], void *));
474 /* Prefetch and forward already prefetched packets */
475 for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
476 rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
477 j + PREFETCH_OFFSET], void *));
478 l3fwd_simple_forward(pkts_burst[j], qconf, i, portid);
481 /* Forward remaining prefetched packets */
482 for (; j < nb_rx; j++) {
483 l3fwd_simple_forward(pkts_burst[j], qconf, i, portid);
491 print_usage(const char *prgname)
493 printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
494 " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
495 " -q NQ: number of queue (=ports) per lcore (default is 1)\n",
500 parse_portmask(const char *portmask)
505 /* parse hexadecimal string */
506 pm = strtoul(portmask, &end, 16);
507 if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
517 parse_nqueue(const char *q_arg)
522 /* parse hexadecimal string */
523 n = strtoul(q_arg, &end, 10);
524 if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
528 if (n >= MAX_RX_QUEUE_PER_LCORE)
534 /* Parse the argument given in the command line of the application */
536 parse_args(int argc, char **argv)
541 char *prgname = argv[0];
542 static struct option lgopts[] = {
548 while ((opt = getopt_long(argc, argvopt, "p:q:",
549 lgopts, &option_index)) != EOF) {
554 enabled_port_mask = parse_portmask(optarg);
555 if (enabled_port_mask < 0) {
556 printf("invalid portmask\n");
557 print_usage(prgname);
564 rx_queue_per_lcore = parse_nqueue(optarg);
565 if (rx_queue_per_lcore < 0) {
566 printf("invalid queue number\n");
567 print_usage(prgname);
574 print_usage(prgname);
578 print_usage(prgname);
583 if (enabled_port_mask == 0) {
584 printf("portmask not specified\n");
585 print_usage(prgname);
590 argv[optind-1] = prgname;
593 optind = 0; /* reset getopt lib */
598 print_ethaddr(const char *name, struct ether_addr *eth_addr)
600 char buf[ETHER_ADDR_FMT_SIZE];
601 ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
602 printf("%s%s", name, buf);
605 /* Check the link status of all ports in up to 9s, and print them finally */
607 check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
609 #define CHECK_INTERVAL 100 /* 100ms */
610 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
611 uint8_t portid, count, all_ports_up, print_flag = 0;
612 struct rte_eth_link link;
614 printf("\nChecking link status");
616 for (count = 0; count <= MAX_CHECK_TIME; count++) {
618 for (portid = 0; portid < port_num; portid++) {
619 if ((port_mask & (1 << portid)) == 0)
621 memset(&link, 0, sizeof(link));
622 rte_eth_link_get_nowait(portid, &link);
623 /* print link status if flag set */
624 if (print_flag == 1) {
625 if (link.link_status)
626 printf("Port %d Link Up - speed %u "
627 "Mbps - %s\n", (uint8_t)portid,
628 (unsigned)link.link_speed,
629 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
630 ("full-duplex") : ("half-duplex\n"));
632 printf("Port %d Link Down\n",
636 /* clear all_ports_up flag if any link down */
637 if (link.link_status == 0) {
642 /* after finally printing all link status, get out */
646 if (all_ports_up == 0) {
649 rte_delay_ms(CHECK_INTERVAL);
652 /* set the print_flag if all ports up or timeout */
653 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
661 init_routing_table(void)
664 struct rte_lpm6 *lpm6;
668 for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
669 if (socket_lpm[socket]) {
670 lpm = socket_lpm[socket];
671 /* populate the LPM table */
672 for (i = 0; i < RTE_DIM(l3fwd_ipv4_route_array); i++) {
673 ret = rte_lpm_add(lpm,
674 l3fwd_ipv4_route_array[i].ip,
675 l3fwd_ipv4_route_array[i].depth,
676 l3fwd_ipv4_route_array[i].if_out);
679 RTE_LOG(ERR, IP_FRAG, "Unable to add entry %i to the l3fwd "
684 RTE_LOG(INFO, IP_FRAG, "Socket %i: adding route " IPv4_BYTES_FMT
687 IPv4_BYTES(l3fwd_ipv4_route_array[i].ip),
688 l3fwd_ipv4_route_array[i].depth,
689 l3fwd_ipv4_route_array[i].if_out);
693 if (socket_lpm6[socket]) {
694 lpm6 = socket_lpm6[socket];
695 /* populate the LPM6 table */
696 for (i = 0; i < RTE_DIM(l3fwd_ipv6_route_array); i++) {
697 ret = rte_lpm6_add(lpm6,
698 l3fwd_ipv6_route_array[i].ip,
699 l3fwd_ipv6_route_array[i].depth,
700 l3fwd_ipv6_route_array[i].if_out);
703 RTE_LOG(ERR, IP_FRAG, "Unable to add entry %i to the l3fwd "
708 RTE_LOG(INFO, IP_FRAG, "Socket %i: adding route " IPv6_BYTES_FMT
711 IPv6_BYTES(l3fwd_ipv6_route_array[i].ip),
712 l3fwd_ipv6_route_array[i].depth,
713 l3fwd_ipv6_route_array[i].if_out);
724 struct rte_mempool *mp;
726 struct rte_lpm6 *lpm6;
730 /* traverse through lcores and initialize structures on each socket */
732 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
734 if (rte_lcore_is_enabled(lcore_id) == 0)
737 socket = rte_lcore_to_socket_id(lcore_id);
739 if (socket == SOCKET_ID_ANY)
742 if (socket_direct_pool[socket] == NULL) {
743 RTE_LOG(INFO, IP_FRAG, "Creating direct mempool on socket %i\n",
745 snprintf(buf, sizeof(buf), "pool_direct_%i", socket);
747 mp = rte_mempool_create(buf, NB_MBUF,
749 sizeof(struct rte_pktmbuf_pool_private),
750 rte_pktmbuf_pool_init, NULL,
751 rte_pktmbuf_init, NULL,
754 RTE_LOG(ERR, IP_FRAG, "Cannot create direct mempool\n");
757 socket_direct_pool[socket] = mp;
760 if (socket_indirect_pool[socket] == NULL) {
761 RTE_LOG(INFO, IP_FRAG, "Creating indirect mempool on socket %i\n",
763 snprintf(buf, sizeof(buf), "pool_indirect_%i", socket);
765 mp = rte_mempool_create(buf, NB_MBUF,
766 sizeof(struct rte_mbuf), 32,
769 rte_pktmbuf_init, NULL,
772 RTE_LOG(ERR, IP_FRAG, "Cannot create indirect mempool\n");
775 socket_indirect_pool[socket] = mp;
778 if (socket_lpm[socket] == NULL) {
779 RTE_LOG(INFO, IP_FRAG, "Creating LPM table on socket %i\n", socket);
780 snprintf(buf, sizeof(buf), "IP_FRAG_LPM_%i", socket);
782 lpm = rte_lpm_create(buf, socket, LPM_MAX_RULES, 0);
784 RTE_LOG(ERR, IP_FRAG, "Cannot create LPM table\n");
787 socket_lpm[socket] = lpm;
790 if (socket_lpm6[socket] == NULL) {
791 RTE_LOG(INFO, IP_FRAG, "Creating LPM6 table on socket %i\n", socket);
792 snprintf(buf, sizeof(buf), "IP_FRAG_LPM_%i", socket);
794 lpm6 = rte_lpm6_create("IP_FRAG_LPM6", socket, &lpm6_config);
796 RTE_LOG(ERR, IP_FRAG, "Cannot create LPM table\n");
799 socket_lpm6[socket] = lpm6;
807 main(int argc, char **argv)
809 struct lcore_queue_conf *qconf;
810 struct rte_eth_dev_info dev_info;
811 struct rte_eth_txconf *txconf;
812 struct rx_queue *rxq;
815 uint16_t queueid = 0;
816 unsigned lcore_id = 0, rx_lcore_id = 0;
817 uint32_t n_tx_queue, nb_lcores;
821 ret = rte_eal_init(argc, argv);
823 rte_exit(EXIT_FAILURE, "rte_eal_init failed");
827 /* parse application arguments (after the EAL ones) */
828 ret = parse_args(argc, argv);
830 rte_exit(EXIT_FAILURE, "Invalid arguments");
832 nb_ports = rte_eth_dev_count();
833 if (nb_ports > RTE_MAX_ETHPORTS)
834 nb_ports = RTE_MAX_ETHPORTS;
835 else if (nb_ports == 0)
836 rte_exit(EXIT_FAILURE, "No ports found!\n");
838 nb_lcores = rte_lcore_count();
840 /* initialize structures (mempools, lpm etc.) */
842 rte_panic("Cannot initialize memory structures!\n");
844 /* check if portmask has non-existent ports */
845 if (enabled_port_mask & ~(RTE_LEN2MASK(nb_ports, unsigned)))
846 rte_exit(EXIT_FAILURE, "Non-existent ports in portmask!\n");
848 /* initialize all ports */
849 for (portid = 0; portid < nb_ports; portid++) {
850 /* skip ports that are not enabled */
851 if ((enabled_port_mask & (1 << portid)) == 0) {
852 printf("Skipping disabled port %d\n", portid);
856 qconf = &lcore_queue_conf[rx_lcore_id];
858 /* get the lcore_id for this port */
859 while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
860 qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {
863 if (rx_lcore_id >= RTE_MAX_LCORE)
864 rte_exit(EXIT_FAILURE, "Not enough cores\n");
866 qconf = &lcore_queue_conf[rx_lcore_id];
869 socket = (int) rte_lcore_to_socket_id(rx_lcore_id);
870 if (socket == SOCKET_ID_ANY)
873 rxq = &qconf->rx_queue_list[qconf->n_rx_queue];
874 rxq->portid = portid;
875 rxq->direct_pool = socket_direct_pool[socket];
876 rxq->indirect_pool = socket_indirect_pool[socket];
877 rxq->lpm = socket_lpm[socket];
878 rxq->lpm6 = socket_lpm6[socket];
882 printf("Initializing port %d on lcore %u...", portid,
886 n_tx_queue = nb_lcores;
887 if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
888 n_tx_queue = MAX_TX_QUEUE_PER_PORT;
889 ret = rte_eth_dev_configure(portid, 1, (uint16_t)n_tx_queue,
893 rte_exit(EXIT_FAILURE, "Cannot configure device: "
898 /* init one RX queue */
899 ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
901 socket_direct_pool[socket]);
904 rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: "
909 rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
910 print_ethaddr(" Address:", &ports_eth_addr[portid]);
913 /* init one TX queue per couple (lcore,port) */
915 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
916 if (rte_lcore_is_enabled(lcore_id) == 0)
919 socket = (int) rte_lcore_to_socket_id(lcore_id);
920 printf("txq=%u,%d ", lcore_id, queueid);
923 rte_eth_dev_info_get(portid, &dev_info);
924 txconf = &dev_info.default_txconf;
925 txconf->txq_flags = 0;
926 ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
930 rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: "
931 "err=%d, port=%d\n", ret, portid);
934 qconf = &lcore_queue_conf[lcore_id];
935 qconf->tx_queue_id[portid] = queueid;
945 for (portid = 0; portid < nb_ports; portid++) {
946 if ((enabled_port_mask & (1 << portid)) == 0) {
950 ret = rte_eth_dev_start(portid);
952 rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
955 rte_eth_promiscuous_enable(portid);
958 if (init_routing_table() < 0)
959 rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
961 check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
963 /* launch per-lcore init on every lcore */
964 rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
965 RTE_LCORE_FOREACH_SLAVE(lcore_id) {
966 if (rte_eal_wait_lcore(lcore_id) < 0)