4 * Copyright(c) 2015-2017 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 #include <sys/types.h>
41 #include <sys/queue.h>
42 #include <netinet/in.h>
51 #include <rte_atomic.h>
52 #include <rte_branch_prediction.h>
53 #include <rte_common.h>
54 #include <rte_cryptodev.h>
55 #include <rte_cycles.h>
56 #include <rte_debug.h>
58 #include <rte_ether.h>
59 #include <rte_ethdev.h>
60 #include <rte_interrupts.h>
62 #include <rte_launch.h>
63 #include <rte_lcore.h>
65 #include <rte_malloc.h>
67 #include <rte_memcpy.h>
68 #include <rte_memory.h>
69 #include <rte_mempool.h>
70 #include <rte_memzone.h>
72 #include <rte_per_lcore.h>
73 #include <rte_prefetch.h>
74 #include <rte_random.h>
75 #include <rte_hexdump.h>
83 #define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
87 #define MAX_STR_LEN 32
88 #define MAX_KEY_SIZE 128
89 #define MAX_PKT_BURST 32
90 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
92 #define MAXIMUM_IV_LENGTH 16
93 #define IV_OFFSET (sizeof(struct rte_crypto_op) + \
94 sizeof(struct rte_crypto_sym_op))
97 * Configurable number of RX/TX ring descriptors
99 #define RTE_TEST_RX_DESC_DEFAULT 128
100 #define RTE_TEST_TX_DESC_DEFAULT 512
102 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
103 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
105 /* ethernet addresses of ports */
106 static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
108 /* mask of enabled ports */
109 static uint64_t l2fwd_enabled_port_mask;
110 static uint64_t l2fwd_enabled_crypto_mask;
112 /* list of enabled ports */
113 static uint32_t l2fwd_dst_ports[RTE_MAX_ETHPORTS];
118 struct rte_mbuf *buffer[MAX_PKT_BURST];
123 struct rte_crypto_op *buffer[MAX_PKT_BURST];
126 #define MAX_RX_QUEUE_PER_LCORE 16
127 #define MAX_TX_QUEUE_PER_PORT 16
129 enum l2fwd_crypto_xform_chain {
130 L2FWD_CRYPTO_CIPHER_HASH,
131 L2FWD_CRYPTO_HASH_CIPHER,
132 L2FWD_CRYPTO_CIPHER_ONLY,
133 L2FWD_CRYPTO_HASH_ONLY
139 phys_addr_t phys_addr;
142 /** l2fwd crypto application command line options */
143 struct l2fwd_crypto_options {
145 unsigned nb_ports_per_lcore;
146 unsigned refresh_period;
147 unsigned single_lcore:1;
150 unsigned sessionless:1;
152 enum l2fwd_crypto_xform_chain xform_chain;
154 struct rte_crypto_sym_xform cipher_xform;
156 int ckey_random_size;
162 struct rte_crypto_sym_xform auth_xform;
164 int akey_random_size;
166 struct l2fwd_key aad;
173 char string_type[MAX_STR_LEN];
175 uint64_t cryptodev_mask;
178 /** l2fwd crypto lcore params */
179 struct l2fwd_crypto_params {
183 unsigned digest_length;
187 struct l2fwd_key aad;
188 struct rte_cryptodev_sym_session *session;
194 enum rte_crypto_cipher_algorithm cipher_algo;
195 enum rte_crypto_auth_algorithm auth_algo;
198 /** lcore configuration */
199 struct lcore_queue_conf {
200 unsigned nb_rx_ports;
201 unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
203 unsigned nb_crypto_devs;
204 unsigned cryptodev_list[MAX_RX_QUEUE_PER_LCORE];
206 struct op_buffer op_buf[RTE_CRYPTO_MAX_DEVS];
207 struct pkt_buffer pkt_buf[RTE_MAX_ETHPORTS];
208 } __rte_cache_aligned;
210 struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
212 static const struct rte_eth_conf port_conf = {
214 .mq_mode = ETH_MQ_RX_NONE,
215 .max_rx_pkt_len = ETHER_MAX_LEN,
217 .header_split = 0, /**< Header Split disabled */
218 .hw_ip_checksum = 0, /**< IP checksum offload disabled */
219 .hw_vlan_filter = 0, /**< VLAN filtering disabled */
220 .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
221 .hw_strip_crc = 1, /**< CRC stripped by hardware */
224 .mq_mode = ETH_MQ_TX_NONE,
228 struct rte_mempool *l2fwd_pktmbuf_pool;
229 struct rte_mempool *l2fwd_crypto_op_pool;
231 /* Per-port statistics struct */
232 struct l2fwd_port_statistics {
236 uint64_t crypto_enqueued;
237 uint64_t crypto_dequeued;
240 } __rte_cache_aligned;
242 struct l2fwd_crypto_statistics {
247 } __rte_cache_aligned;
249 struct l2fwd_port_statistics port_statistics[RTE_MAX_ETHPORTS];
250 struct l2fwd_crypto_statistics crypto_statistics[RTE_CRYPTO_MAX_DEVS];
252 /* A tsc-based timer responsible for triggering statistics printout */
253 #define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
254 #define MAX_TIMER_PERIOD 86400UL /* 1 day max */
256 /* default period is 10 seconds */
257 static int64_t timer_period = 10 * TIMER_MILLISECOND * 1000;
259 /* Print out statistics on packets dropped */
263 uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
264 uint64_t total_packets_enqueued, total_packets_dequeued,
265 total_packets_errors;
269 total_packets_dropped = 0;
270 total_packets_tx = 0;
271 total_packets_rx = 0;
272 total_packets_enqueued = 0;
273 total_packets_dequeued = 0;
274 total_packets_errors = 0;
276 const char clr[] = { 27, '[', '2', 'J', '\0' };
277 const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
279 /* Clear screen and move to top left */
280 printf("%s%s", clr, topLeft);
282 printf("\nPort statistics ====================================");
284 for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
285 /* skip disabled ports */
286 if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
288 printf("\nStatistics for port %u ------------------------------"
289 "\nPackets sent: %32"PRIu64
290 "\nPackets received: %28"PRIu64
291 "\nPackets dropped: %29"PRIu64,
293 port_statistics[portid].tx,
294 port_statistics[portid].rx,
295 port_statistics[portid].dropped);
297 total_packets_dropped += port_statistics[portid].dropped;
298 total_packets_tx += port_statistics[portid].tx;
299 total_packets_rx += port_statistics[portid].rx;
301 printf("\nCrypto statistics ==================================");
303 for (cdevid = 0; cdevid < RTE_CRYPTO_MAX_DEVS; cdevid++) {
304 /* skip disabled ports */
305 if ((l2fwd_enabled_crypto_mask & (((uint64_t)1) << cdevid)) == 0)
307 printf("\nStatistics for cryptodev %"PRIu64
308 " -------------------------"
309 "\nPackets enqueued: %28"PRIu64
310 "\nPackets dequeued: %28"PRIu64
311 "\nPackets errors: %30"PRIu64,
313 crypto_statistics[cdevid].enqueued,
314 crypto_statistics[cdevid].dequeued,
315 crypto_statistics[cdevid].errors);
317 total_packets_enqueued += crypto_statistics[cdevid].enqueued;
318 total_packets_dequeued += crypto_statistics[cdevid].dequeued;
319 total_packets_errors += crypto_statistics[cdevid].errors;
321 printf("\nAggregate statistics ==============================="
322 "\nTotal packets received: %22"PRIu64
323 "\nTotal packets enqueued: %22"PRIu64
324 "\nTotal packets dequeued: %22"PRIu64
325 "\nTotal packets sent: %26"PRIu64
326 "\nTotal packets dropped: %23"PRIu64
327 "\nTotal packets crypto errors: %17"PRIu64,
329 total_packets_enqueued,
330 total_packets_dequeued,
332 total_packets_dropped,
333 total_packets_errors);
334 printf("\n====================================================\n");
338 l2fwd_crypto_send_burst(struct lcore_queue_conf *qconf, unsigned n,
339 struct l2fwd_crypto_params *cparams)
341 struct rte_crypto_op **op_buffer;
344 op_buffer = (struct rte_crypto_op **)
345 qconf->op_buf[cparams->dev_id].buffer;
347 ret = rte_cryptodev_enqueue_burst(cparams->dev_id,
348 cparams->qp_id, op_buffer, (uint16_t) n);
350 crypto_statistics[cparams->dev_id].enqueued += ret;
351 if (unlikely(ret < n)) {
352 crypto_statistics[cparams->dev_id].errors += (n - ret);
354 rte_pktmbuf_free(op_buffer[ret]->sym->m_src);
355 rte_crypto_op_free(op_buffer[ret]);
363 l2fwd_crypto_enqueue(struct rte_crypto_op *op,
364 struct l2fwd_crypto_params *cparams)
366 unsigned lcore_id, len;
367 struct lcore_queue_conf *qconf;
369 lcore_id = rte_lcore_id();
371 qconf = &lcore_queue_conf[lcore_id];
372 len = qconf->op_buf[cparams->dev_id].len;
373 qconf->op_buf[cparams->dev_id].buffer[len] = op;
376 /* enough ops to be sent */
377 if (len == MAX_PKT_BURST) {
378 l2fwd_crypto_send_burst(qconf, MAX_PKT_BURST, cparams);
382 qconf->op_buf[cparams->dev_id].len = len;
387 l2fwd_simple_crypto_enqueue(struct rte_mbuf *m,
388 struct rte_crypto_op *op,
389 struct l2fwd_crypto_params *cparams)
391 struct ether_hdr *eth_hdr;
392 struct ipv4_hdr *ip_hdr;
394 uint32_t ipdata_offset, data_len;
395 uint32_t pad_len = 0;
398 eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
400 if (eth_hdr->ether_type != rte_cpu_to_be_16(ETHER_TYPE_IPv4))
403 ipdata_offset = sizeof(struct ether_hdr);
405 ip_hdr = (struct ipv4_hdr *)(rte_pktmbuf_mtod(m, char *) +
408 ipdata_offset += (ip_hdr->version_ihl & IPV4_HDR_IHL_MASK)
409 * IPV4_IHL_MULTIPLIER;
412 /* Zero pad data to be crypto'd so it is block aligned */
413 data_len = rte_pktmbuf_data_len(m) - ipdata_offset;
415 if (cparams->do_hash && cparams->hash_verify)
416 data_len -= cparams->digest_length;
418 if (cparams->do_cipher) {
420 * Following algorithms are block cipher algorithms,
421 * and might need padding
423 switch (cparams->cipher_algo) {
424 case RTE_CRYPTO_CIPHER_AES_CBC:
425 case RTE_CRYPTO_CIPHER_AES_ECB:
426 case RTE_CRYPTO_CIPHER_DES_CBC:
427 case RTE_CRYPTO_CIPHER_3DES_CBC:
428 case RTE_CRYPTO_CIPHER_3DES_ECB:
429 if (data_len % cparams->block_size)
430 pad_len = cparams->block_size -
431 (data_len % cparams->block_size);
438 padding = rte_pktmbuf_append(m, pad_len);
439 if (unlikely(!padding))
443 memset(padding, 0, pad_len);
447 /* Set crypto operation data parameters */
448 rte_crypto_op_attach_sym_session(op, cparams->session);
450 if (cparams->do_hash) {
451 if (!cparams->hash_verify) {
452 /* Append space for digest to end of packet */
453 op->sym->auth.digest.data = (uint8_t *)rte_pktmbuf_append(m,
454 cparams->digest_length);
456 op->sym->auth.digest.data = rte_pktmbuf_mtod(m,
457 uint8_t *) + ipdata_offset + data_len;
460 op->sym->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(m,
461 rte_pktmbuf_pkt_len(m) - cparams->digest_length);
462 op->sym->auth.digest.length = cparams->digest_length;
464 /* For wireless algorithms, offset/length must be in bits */
465 if (cparams->auth_algo == RTE_CRYPTO_AUTH_SNOW3G_UIA2 ||
466 cparams->auth_algo == RTE_CRYPTO_AUTH_KASUMI_F9 ||
467 cparams->auth_algo == RTE_CRYPTO_AUTH_ZUC_EIA3) {
468 op->sym->auth.data.offset = ipdata_offset << 3;
469 op->sym->auth.data.length = data_len << 3;
471 op->sym->auth.data.offset = ipdata_offset;
472 op->sym->auth.data.length = data_len;
475 if (cparams->aad.length) {
476 op->sym->auth.aad.data = cparams->aad.data;
477 op->sym->auth.aad.phys_addr = cparams->aad.phys_addr;
478 op->sym->auth.aad.length = cparams->aad.length;
480 op->sym->auth.aad.data = NULL;
481 op->sym->auth.aad.phys_addr = 0;
482 op->sym->auth.aad.length = 0;
486 if (cparams->do_cipher) {
487 uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
489 /* Copy IV at the end of the crypto operation */
490 rte_memcpy(iv_ptr, cparams->iv.data, cparams->iv.length);
492 op->sym->cipher.iv.offset = IV_OFFSET;
493 op->sym->cipher.iv.length = cparams->iv.length;
495 /* For wireless algorithms, offset/length must be in bits */
496 if (cparams->cipher_algo == RTE_CRYPTO_CIPHER_SNOW3G_UEA2 ||
497 cparams->cipher_algo == RTE_CRYPTO_CIPHER_KASUMI_F8 ||
498 cparams->cipher_algo == RTE_CRYPTO_CIPHER_ZUC_EEA3) {
499 op->sym->cipher.data.offset = ipdata_offset << 3;
500 op->sym->cipher.data.length = data_len << 3;
502 op->sym->cipher.data.offset = ipdata_offset;
503 op->sym->cipher.data.length = data_len;
509 return l2fwd_crypto_enqueue(op, cparams);
513 /* Send the burst of packets on an output interface */
515 l2fwd_send_burst(struct lcore_queue_conf *qconf, unsigned n,
518 struct rte_mbuf **pkt_buffer;
521 pkt_buffer = (struct rte_mbuf **)qconf->pkt_buf[port].buffer;
523 ret = rte_eth_tx_burst(port, 0, pkt_buffer, (uint16_t)n);
524 port_statistics[port].tx += ret;
525 if (unlikely(ret < n)) {
526 port_statistics[port].dropped += (n - ret);
528 rte_pktmbuf_free(pkt_buffer[ret]);
535 /* Enqueue packets for TX and prepare them to be sent */
537 l2fwd_send_packet(struct rte_mbuf *m, uint8_t port)
539 unsigned lcore_id, len;
540 struct lcore_queue_conf *qconf;
542 lcore_id = rte_lcore_id();
544 qconf = &lcore_queue_conf[lcore_id];
545 len = qconf->pkt_buf[port].len;
546 qconf->pkt_buf[port].buffer[len] = m;
549 /* enough pkts to be sent */
550 if (unlikely(len == MAX_PKT_BURST)) {
551 l2fwd_send_burst(qconf, MAX_PKT_BURST, port);
555 qconf->pkt_buf[port].len = len;
560 l2fwd_simple_forward(struct rte_mbuf *m, unsigned portid)
562 struct ether_hdr *eth;
566 dst_port = l2fwd_dst_ports[portid];
567 eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
569 /* 02:00:00:00:00:xx */
570 tmp = ð->d_addr.addr_bytes[0];
571 *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
574 ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], ð->s_addr);
576 l2fwd_send_packet(m, (uint8_t) dst_port);
579 /** Generate random key */
581 generate_random_key(uint8_t *key, unsigned length)
586 fd = open("/dev/urandom", O_RDONLY);
588 rte_exit(EXIT_FAILURE, "Failed to generate random key\n");
590 ret = read(fd, key, length);
593 if (ret != (signed)length)
594 rte_exit(EXIT_FAILURE, "Failed to generate random key\n");
597 static struct rte_cryptodev_sym_session *
598 initialize_crypto_session(struct l2fwd_crypto_options *options,
601 struct rte_crypto_sym_xform *first_xform;
603 if (options->xform_chain == L2FWD_CRYPTO_CIPHER_HASH) {
604 first_xform = &options->cipher_xform;
605 first_xform->next = &options->auth_xform;
606 } else if (options->xform_chain == L2FWD_CRYPTO_HASH_CIPHER) {
607 first_xform = &options->auth_xform;
608 first_xform->next = &options->cipher_xform;
609 } else if (options->xform_chain == L2FWD_CRYPTO_CIPHER_ONLY) {
610 first_xform = &options->cipher_xform;
612 first_xform = &options->auth_xform;
615 /* Setup Cipher Parameters */
616 return rte_cryptodev_sym_session_create(cdev_id, first_xform);
620 l2fwd_crypto_options_print(struct l2fwd_crypto_options *options);
622 /* main processing loop */
624 l2fwd_main_loop(struct l2fwd_crypto_options *options)
626 struct rte_mbuf *m, *pkts_burst[MAX_PKT_BURST];
627 struct rte_crypto_op *ops_burst[MAX_PKT_BURST];
629 unsigned lcore_id = rte_lcore_id();
630 uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
631 unsigned i, j, portid, nb_rx, len;
632 struct lcore_queue_conf *qconf = &lcore_queue_conf[lcore_id];
633 const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
634 US_PER_S * BURST_TX_DRAIN_US;
635 struct l2fwd_crypto_params *cparams;
636 struct l2fwd_crypto_params port_cparams[qconf->nb_crypto_devs];
638 if (qconf->nb_rx_ports == 0) {
639 RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
643 RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
645 for (i = 0; i < qconf->nb_rx_ports; i++) {
647 portid = qconf->rx_port_list[i];
648 RTE_LOG(INFO, L2FWD, " -- lcoreid=%u portid=%u\n", lcore_id,
652 for (i = 0; i < qconf->nb_crypto_devs; i++) {
653 port_cparams[i].do_cipher = 0;
654 port_cparams[i].do_hash = 0;
656 switch (options->xform_chain) {
657 case L2FWD_CRYPTO_CIPHER_HASH:
658 case L2FWD_CRYPTO_HASH_CIPHER:
659 port_cparams[i].do_cipher = 1;
660 port_cparams[i].do_hash = 1;
662 case L2FWD_CRYPTO_HASH_ONLY:
663 port_cparams[i].do_hash = 1;
665 case L2FWD_CRYPTO_CIPHER_ONLY:
666 port_cparams[i].do_cipher = 1;
670 port_cparams[i].dev_id = qconf->cryptodev_list[i];
671 port_cparams[i].qp_id = 0;
673 port_cparams[i].block_size = options->block_size;
675 if (port_cparams[i].do_hash) {
676 port_cparams[i].digest_length =
677 options->auth_xform.auth.digest_length;
678 if (options->auth_xform.auth.add_auth_data_length) {
679 port_cparams[i].aad.data = options->aad.data;
680 port_cparams[i].aad.length =
681 options->auth_xform.auth.add_auth_data_length;
682 port_cparams[i].aad.phys_addr = options->aad.phys_addr;
683 if (!options->aad_param)
684 generate_random_key(port_cparams[i].aad.data,
685 port_cparams[i].aad.length);
688 port_cparams[i].aad.length = 0;
690 if (options->auth_xform.auth.op == RTE_CRYPTO_AUTH_OP_VERIFY)
691 port_cparams[i].hash_verify = 1;
693 port_cparams[i].hash_verify = 0;
695 port_cparams[i].auth_algo = options->auth_xform.auth.algo;
698 if (port_cparams[i].do_cipher) {
699 port_cparams[i].iv.data = options->iv.data;
700 port_cparams[i].iv.length = options->iv.length;
701 if (!options->iv_param)
702 generate_random_key(port_cparams[i].iv.data,
703 port_cparams[i].iv.length);
705 port_cparams[i].cipher_algo = options->cipher_xform.cipher.algo;
708 port_cparams[i].session = initialize_crypto_session(options,
709 port_cparams[i].dev_id);
711 if (port_cparams[i].session == NULL)
713 RTE_LOG(INFO, L2FWD, " -- lcoreid=%u cryptoid=%u\n", lcore_id,
714 port_cparams[i].dev_id);
717 l2fwd_crypto_options_print(options);
720 * Initialize previous tsc timestamp before the loop,
721 * to avoid showing the port statistics immediately,
722 * so user can see the crypto information.
724 prev_tsc = rte_rdtsc();
727 cur_tsc = rte_rdtsc();
730 * Crypto device/TX burst queue drain
732 diff_tsc = cur_tsc - prev_tsc;
733 if (unlikely(diff_tsc > drain_tsc)) {
734 /* Enqueue all crypto ops remaining in buffers */
735 for (i = 0; i < qconf->nb_crypto_devs; i++) {
736 cparams = &port_cparams[i];
737 len = qconf->op_buf[cparams->dev_id].len;
738 l2fwd_crypto_send_burst(qconf, len, cparams);
739 qconf->op_buf[cparams->dev_id].len = 0;
741 /* Transmit all packets remaining in buffers */
742 for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
743 if (qconf->pkt_buf[portid].len == 0)
745 l2fwd_send_burst(&lcore_queue_conf[lcore_id],
746 qconf->pkt_buf[portid].len,
748 qconf->pkt_buf[portid].len = 0;
751 /* if timer is enabled */
752 if (timer_period > 0) {
754 /* advance the timer */
755 timer_tsc += diff_tsc;
757 /* if timer has reached its timeout */
758 if (unlikely(timer_tsc >=
759 (uint64_t)timer_period)) {
761 /* do this only on master core */
762 if (lcore_id == rte_get_master_lcore()
763 && options->refresh_period) {
774 * Read packet from RX queues
776 for (i = 0; i < qconf->nb_rx_ports; i++) {
777 portid = qconf->rx_port_list[i];
779 cparams = &port_cparams[i];
781 nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
782 pkts_burst, MAX_PKT_BURST);
784 port_statistics[portid].rx += nb_rx;
788 * If we can't allocate a crypto_ops, then drop
789 * the rest of the burst and dequeue and
790 * process the packets to free offload structs
792 if (rte_crypto_op_bulk_alloc(
793 l2fwd_crypto_op_pool,
794 RTE_CRYPTO_OP_TYPE_SYMMETRIC,
797 for (j = 0; j < nb_rx; j++)
798 rte_pktmbuf_free(pkts_burst[j]);
803 /* Enqueue packets from Crypto device*/
804 for (j = 0; j < nb_rx; j++) {
807 l2fwd_simple_crypto_enqueue(m,
808 ops_burst[j], cparams);
812 /* Dequeue packets from Crypto device */
814 nb_rx = rte_cryptodev_dequeue_burst(
815 cparams->dev_id, cparams->qp_id,
816 ops_burst, MAX_PKT_BURST);
818 crypto_statistics[cparams->dev_id].dequeued +=
821 /* Forward crypto'd packets */
822 for (j = 0; j < nb_rx; j++) {
823 m = ops_burst[j]->sym->m_src;
825 rte_crypto_op_free(ops_burst[j]);
826 l2fwd_simple_forward(m, portid);
828 } while (nb_rx == MAX_PKT_BURST);
834 l2fwd_launch_one_lcore(void *arg)
836 l2fwd_main_loop((struct l2fwd_crypto_options *)arg);
840 /* Display command line arguments usage */
842 l2fwd_crypto_usage(const char *prgname)
844 printf("%s [EAL options] --\n"
845 " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
846 " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
847 " -s manage all ports from single lcore\n"
848 " -T PERIOD: statistics will be refreshed each PERIOD seconds"
849 " (0 to disable, 10 default, 86400 maximum)\n"
851 " --cdev_type HW / SW / ANY\n"
852 " --chain HASH_CIPHER / CIPHER_HASH / CIPHER_ONLY /"
855 " --cipher_algo ALGO\n"
856 " --cipher_op ENCRYPT / DECRYPT\n"
857 " --cipher_key KEY (bytes separated with \":\")\n"
858 " --cipher_key_random_size SIZE: size of cipher key when generated randomly\n"
859 " --iv IV (bytes separated with \":\")\n"
860 " --iv_random_size SIZE: size of IV when generated randomly\n"
862 " --auth_algo ALGO\n"
863 " --auth_op GENERATE / VERIFY\n"
864 " --auth_key KEY (bytes separated with \":\")\n"
865 " --auth_key_random_size SIZE: size of auth key when generated randomly\n"
866 " --aad AAD (bytes separated with \":\")\n"
867 " --aad_random_size SIZE: size of AAD when generated randomly\n"
868 " --digest_size SIZE: size of digest to be generated/verified\n"
871 " --cryptodev_mask MASK: hexadecimal bitmask of crypto devices to configure\n",
875 /** Parse crypto device type command line argument */
877 parse_cryptodev_type(enum cdev_type *type, char *optarg)
879 if (strcmp("HW", optarg) == 0) {
880 *type = CDEV_TYPE_HW;
882 } else if (strcmp("SW", optarg) == 0) {
883 *type = CDEV_TYPE_SW;
885 } else if (strcmp("ANY", optarg) == 0) {
886 *type = CDEV_TYPE_ANY;
893 /** Parse crypto chain xform command line argument */
895 parse_crypto_opt_chain(struct l2fwd_crypto_options *options, char *optarg)
897 if (strcmp("CIPHER_HASH", optarg) == 0) {
898 options->xform_chain = L2FWD_CRYPTO_CIPHER_HASH;
900 } else if (strcmp("HASH_CIPHER", optarg) == 0) {
901 options->xform_chain = L2FWD_CRYPTO_HASH_CIPHER;
903 } else if (strcmp("CIPHER_ONLY", optarg) == 0) {
904 options->xform_chain = L2FWD_CRYPTO_CIPHER_ONLY;
906 } else if (strcmp("HASH_ONLY", optarg) == 0) {
907 options->xform_chain = L2FWD_CRYPTO_HASH_ONLY;
914 /** Parse crypto cipher algo option command line argument */
916 parse_cipher_algo(enum rte_crypto_cipher_algorithm *algo, char *optarg)
919 if (rte_cryptodev_get_cipher_algo_enum(algo, optarg) < 0) {
920 RTE_LOG(ERR, USER1, "Cipher algorithm specified "
928 /** Parse crypto cipher operation command line argument */
930 parse_cipher_op(enum rte_crypto_cipher_operation *op, char *optarg)
932 if (strcmp("ENCRYPT", optarg) == 0) {
933 *op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
935 } else if (strcmp("DECRYPT", optarg) == 0) {
936 *op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
940 printf("Cipher operation not supported!\n");
944 /** Parse crypto key command line argument */
946 parse_key(uint8_t *data, char *input_arg)
951 for (byte_count = 0, token = strtok(input_arg, ":");
952 (byte_count < MAX_KEY_SIZE) && (token != NULL);
953 token = strtok(NULL, ":")) {
955 int number = (int)strtol(token, NULL, 16);
957 if (errno == EINVAL || errno == ERANGE || number > 0xFF)
960 data[byte_count++] = (uint8_t)number;
966 /** Parse size param*/
968 parse_size(int *size, const char *q_arg)
973 /* parse hexadecimal string */
974 n = strtoul(q_arg, &end, 10);
975 if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
979 printf("invalid size\n");
987 /** Parse crypto cipher operation command line argument */
989 parse_auth_algo(enum rte_crypto_auth_algorithm *algo, char *optarg)
991 if (rte_cryptodev_get_auth_algo_enum(algo, optarg) < 0) {
992 RTE_LOG(ERR, USER1, "Authentication algorithm specified "
1001 parse_auth_op(enum rte_crypto_auth_operation *op, char *optarg)
1003 if (strcmp("VERIFY", optarg) == 0) {
1004 *op = RTE_CRYPTO_AUTH_OP_VERIFY;
1006 } else if (strcmp("GENERATE", optarg) == 0) {
1007 *op = RTE_CRYPTO_AUTH_OP_GENERATE;
1011 printf("Authentication operation specified not supported!\n");
1016 parse_cryptodev_mask(struct l2fwd_crypto_options *options,
1022 /* parse hexadecimal string */
1023 pm = strtoul(q_arg, &end, 16);
1024 if ((pm == '\0') || (end == NULL) || (*end != '\0'))
1027 options->cryptodev_mask = pm;
1028 if (options->cryptodev_mask == 0) {
1029 printf("invalid cryptodev_mask specified\n");
1036 /** Parse long options */
1038 l2fwd_crypto_parse_args_long_options(struct l2fwd_crypto_options *options,
1039 struct option *lgopts, int option_index)
1043 if (strcmp(lgopts[option_index].name, "cdev_type") == 0) {
1044 retval = parse_cryptodev_type(&options->type, optarg);
1046 snprintf(options->string_type, MAX_STR_LEN,
1051 else if (strcmp(lgopts[option_index].name, "chain") == 0)
1052 return parse_crypto_opt_chain(options, optarg);
1054 /* Cipher options */
1055 else if (strcmp(lgopts[option_index].name, "cipher_algo") == 0)
1056 return parse_cipher_algo(&options->cipher_xform.cipher.algo,
1059 else if (strcmp(lgopts[option_index].name, "cipher_op") == 0)
1060 return parse_cipher_op(&options->cipher_xform.cipher.op,
1063 else if (strcmp(lgopts[option_index].name, "cipher_key") == 0) {
1064 options->ckey_param = 1;
1065 options->cipher_xform.cipher.key.length =
1066 parse_key(options->cipher_xform.cipher.key.data, optarg);
1067 if (options->cipher_xform.cipher.key.length > 0)
1073 else if (strcmp(lgopts[option_index].name, "cipher_key_random_size") == 0)
1074 return parse_size(&options->ckey_random_size, optarg);
1076 else if (strcmp(lgopts[option_index].name, "iv") == 0) {
1077 options->iv_param = 1;
1078 options->iv.length =
1079 parse_key(options->iv.data, optarg);
1080 if (options->iv.length > 0)
1086 else if (strcmp(lgopts[option_index].name, "iv_random_size") == 0)
1087 return parse_size(&options->iv_random_size, optarg);
1089 /* Authentication options */
1090 else if (strcmp(lgopts[option_index].name, "auth_algo") == 0) {
1091 return parse_auth_algo(&options->auth_xform.auth.algo,
1095 else if (strcmp(lgopts[option_index].name, "auth_op") == 0)
1096 return parse_auth_op(&options->auth_xform.auth.op,
1099 else if (strcmp(lgopts[option_index].name, "auth_key") == 0) {
1100 options->akey_param = 1;
1101 options->auth_xform.auth.key.length =
1102 parse_key(options->auth_xform.auth.key.data, optarg);
1103 if (options->auth_xform.auth.key.length > 0)
1109 else if (strcmp(lgopts[option_index].name, "auth_key_random_size") == 0) {
1110 return parse_size(&options->akey_random_size, optarg);
1113 else if (strcmp(lgopts[option_index].name, "aad") == 0) {
1114 options->aad_param = 1;
1115 options->aad.length =
1116 parse_key(options->aad.data, optarg);
1117 if (options->aad.length > 0)
1123 else if (strcmp(lgopts[option_index].name, "aad_random_size") == 0) {
1124 return parse_size(&options->aad_random_size, optarg);
1127 else if (strcmp(lgopts[option_index].name, "digest_size") == 0) {
1128 return parse_size(&options->digest_size, optarg);
1131 else if (strcmp(lgopts[option_index].name, "sessionless") == 0) {
1132 options->sessionless = 1;
1136 else if (strcmp(lgopts[option_index].name, "cryptodev_mask") == 0)
1137 return parse_cryptodev_mask(options, optarg);
1142 /** Parse port mask */
1144 l2fwd_crypto_parse_portmask(struct l2fwd_crypto_options *options,
1150 /* parse hexadecimal string */
1151 pm = strtoul(q_arg, &end, 16);
1152 if ((pm == '\0') || (end == NULL) || (*end != '\0'))
1155 options->portmask = pm;
1156 if (options->portmask == 0) {
1157 printf("invalid portmask specified\n");
1164 /** Parse number of queues */
1166 l2fwd_crypto_parse_nqueue(struct l2fwd_crypto_options *options,
1172 /* parse hexadecimal string */
1173 n = strtoul(q_arg, &end, 10);
1174 if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
1176 else if (n >= MAX_RX_QUEUE_PER_LCORE)
1179 options->nb_ports_per_lcore = n;
1180 if (options->nb_ports_per_lcore == 0) {
1181 printf("invalid number of ports selected\n");
1188 /** Parse timer period */
1190 l2fwd_crypto_parse_timer_period(struct l2fwd_crypto_options *options,
1196 /* parse number string */
1197 n = (unsigned)strtol(q_arg, &end, 10);
1198 if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
1201 if (n >= MAX_TIMER_PERIOD) {
1202 printf("Warning refresh period specified %lu is greater than "
1203 "max value %lu! using max value",
1204 n, MAX_TIMER_PERIOD);
1205 n = MAX_TIMER_PERIOD;
1208 options->refresh_period = n * 1000 * TIMER_MILLISECOND;
1213 /** Generate default options for application */
1215 l2fwd_crypto_default_options(struct l2fwd_crypto_options *options)
1217 options->portmask = 0xffffffff;
1218 options->nb_ports_per_lcore = 1;
1219 options->refresh_period = 10000;
1220 options->single_lcore = 0;
1221 options->sessionless = 0;
1223 options->xform_chain = L2FWD_CRYPTO_CIPHER_HASH;
1226 options->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
1227 options->cipher_xform.next = NULL;
1228 options->ckey_param = 0;
1229 options->ckey_random_size = -1;
1230 options->cipher_xform.cipher.key.length = 0;
1231 options->iv_param = 0;
1232 options->iv_random_size = -1;
1233 options->iv.length = 0;
1235 options->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
1236 options->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
1238 /* Authentication Data */
1239 options->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
1240 options->auth_xform.next = NULL;
1241 options->akey_param = 0;
1242 options->akey_random_size = -1;
1243 options->auth_xform.auth.key.length = 0;
1244 options->aad_param = 0;
1245 options->aad_random_size = -1;
1246 options->aad.length = 0;
1247 options->digest_size = -1;
1249 options->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
1250 options->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
1252 options->type = CDEV_TYPE_ANY;
1253 options->cryptodev_mask = UINT64_MAX;
1257 display_cipher_info(struct l2fwd_crypto_options *options)
1259 printf("\n---- Cipher information ---\n");
1260 printf("Algorithm: %s\n",
1261 rte_crypto_cipher_algorithm_strings[options->cipher_xform.cipher.algo]);
1262 rte_hexdump(stdout, "Cipher key:",
1263 options->cipher_xform.cipher.key.data,
1264 options->cipher_xform.cipher.key.length);
1265 rte_hexdump(stdout, "IV:", options->iv.data, options->iv.length);
1269 display_auth_info(struct l2fwd_crypto_options *options)
1271 printf("\n---- Authentication information ---\n");
1272 printf("Algorithm: %s\n",
1273 rte_crypto_auth_algorithm_strings[options->auth_xform.auth.algo]);
1274 rte_hexdump(stdout, "Auth key:",
1275 options->auth_xform.auth.key.data,
1276 options->auth_xform.auth.key.length);
1277 rte_hexdump(stdout, "AAD:", options->aad.data, options->aad.length);
1281 l2fwd_crypto_options_print(struct l2fwd_crypto_options *options)
1283 char string_cipher_op[MAX_STR_LEN];
1284 char string_auth_op[MAX_STR_LEN];
1286 if (options->cipher_xform.cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
1287 strcpy(string_cipher_op, "Encrypt");
1289 strcpy(string_cipher_op, "Decrypt");
1291 if (options->auth_xform.auth.op == RTE_CRYPTO_AUTH_OP_GENERATE)
1292 strcpy(string_auth_op, "Auth generate");
1294 strcpy(string_auth_op, "Auth verify");
1296 printf("Options:-\nn");
1297 printf("portmask: %x\n", options->portmask);
1298 printf("ports per lcore: %u\n", options->nb_ports_per_lcore);
1299 printf("refresh period : %u\n", options->refresh_period);
1300 printf("single lcore mode: %s\n",
1301 options->single_lcore ? "enabled" : "disabled");
1302 printf("stats_printing: %s\n",
1303 options->refresh_period == 0 ? "disabled" : "enabled");
1305 printf("sessionless crypto: %s\n",
1306 options->sessionless ? "enabled" : "disabled");
1308 if (options->ckey_param && (options->ckey_random_size != -1))
1309 printf("Cipher key already parsed, ignoring size of random key\n");
1311 if (options->akey_param && (options->akey_random_size != -1))
1312 printf("Auth key already parsed, ignoring size of random key\n");
1314 if (options->iv_param && (options->iv_random_size != -1))
1315 printf("IV already parsed, ignoring size of random IV\n");
1317 if (options->aad_param && (options->aad_random_size != -1))
1318 printf("AAD already parsed, ignoring size of random AAD\n");
1320 printf("\nCrypto chain: ");
1321 switch (options->xform_chain) {
1322 case L2FWD_CRYPTO_CIPHER_HASH:
1323 printf("Input --> %s --> %s --> Output\n",
1324 string_cipher_op, string_auth_op);
1325 display_cipher_info(options);
1326 display_auth_info(options);
1328 case L2FWD_CRYPTO_HASH_CIPHER:
1329 printf("Input --> %s --> %s --> Output\n",
1330 string_auth_op, string_cipher_op);
1331 display_cipher_info(options);
1332 display_auth_info(options);
1334 case L2FWD_CRYPTO_HASH_ONLY:
1335 printf("Input --> %s --> Output\n", string_auth_op);
1336 display_auth_info(options);
1338 case L2FWD_CRYPTO_CIPHER_ONLY:
1339 printf("Input --> %s --> Output\n", string_cipher_op);
1340 display_cipher_info(options);
1345 /* Parse the argument given in the command line of the application */
1347 l2fwd_crypto_parse_args(struct l2fwd_crypto_options *options,
1348 int argc, char **argv)
1350 int opt, retval, option_index;
1351 char **argvopt = argv, *prgname = argv[0];
1353 static struct option lgopts[] = {
1354 { "sessionless", no_argument, 0, 0 },
1356 { "cdev_type", required_argument, 0, 0 },
1357 { "chain", required_argument, 0, 0 },
1359 { "cipher_algo", required_argument, 0, 0 },
1360 { "cipher_op", required_argument, 0, 0 },
1361 { "cipher_key", required_argument, 0, 0 },
1362 { "cipher_key_random_size", required_argument, 0, 0 },
1364 { "auth_algo", required_argument, 0, 0 },
1365 { "auth_op", required_argument, 0, 0 },
1366 { "auth_key", required_argument, 0, 0 },
1367 { "auth_key_random_size", required_argument, 0, 0 },
1369 { "iv", required_argument, 0, 0 },
1370 { "iv_random_size", required_argument, 0, 0 },
1371 { "aad", required_argument, 0, 0 },
1372 { "aad_random_size", required_argument, 0, 0 },
1373 { "digest_size", required_argument, 0, 0 },
1375 { "sessionless", no_argument, 0, 0 },
1376 { "cryptodev_mask", required_argument, 0, 0},
1381 l2fwd_crypto_default_options(options);
1383 while ((opt = getopt_long(argc, argvopt, "p:q:sT:", lgopts,
1384 &option_index)) != EOF) {
1388 retval = l2fwd_crypto_parse_args_long_options(options,
1389 lgopts, option_index);
1391 l2fwd_crypto_usage(prgname);
1398 retval = l2fwd_crypto_parse_portmask(options, optarg);
1400 l2fwd_crypto_usage(prgname);
1407 retval = l2fwd_crypto_parse_nqueue(options, optarg);
1409 l2fwd_crypto_usage(prgname);
1416 options->single_lcore = 1;
1422 retval = l2fwd_crypto_parse_timer_period(options,
1425 l2fwd_crypto_usage(prgname);
1431 l2fwd_crypto_usage(prgname);
1438 argv[optind-1] = prgname;
1441 optind = 1; /* reset getopt lib */
1446 /* Check the link status of all ports in up to 9s, and print them finally */
1448 check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
1450 #define CHECK_INTERVAL 100 /* 100ms */
1451 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
1452 uint8_t portid, count, all_ports_up, print_flag = 0;
1453 struct rte_eth_link link;
1455 printf("\nChecking link status");
1457 for (count = 0; count <= MAX_CHECK_TIME; count++) {
1459 for (portid = 0; portid < port_num; portid++) {
1460 if ((port_mask & (1 << portid)) == 0)
1462 memset(&link, 0, sizeof(link));
1463 rte_eth_link_get_nowait(portid, &link);
1464 /* print link status if flag set */
1465 if (print_flag == 1) {
1466 if (link.link_status)
1467 printf("Port %d Link Up - speed %u "
1468 "Mbps - %s\n", (uint8_t)portid,
1469 (unsigned)link.link_speed,
1470 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
1471 ("full-duplex") : ("half-duplex\n"));
1473 printf("Port %d Link Down\n",
1477 /* clear all_ports_up flag if any link down */
1478 if (link.link_status == ETH_LINK_DOWN) {
1483 /* after finally printing all link status, get out */
1484 if (print_flag == 1)
1487 if (all_ports_up == 0) {
1490 rte_delay_ms(CHECK_INTERVAL);
1493 /* set the print_flag if all ports up or timeout */
1494 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
1501 /* Check if device has to be HW/SW or any */
1503 check_type(struct l2fwd_crypto_options *options, struct rte_cryptodev_info *dev_info)
1505 if (options->type == CDEV_TYPE_HW &&
1506 (dev_info->feature_flags & RTE_CRYPTODEV_FF_HW_ACCELERATED))
1508 if (options->type == CDEV_TYPE_SW &&
1509 !(dev_info->feature_flags & RTE_CRYPTODEV_FF_HW_ACCELERATED))
1511 if (options->type == CDEV_TYPE_ANY)
1517 /* Check if the device is enabled by cryptodev_mask */
1519 check_cryptodev_mask(struct l2fwd_crypto_options *options,
1522 if (options->cryptodev_mask & (1 << cdev_id))
1529 check_supported_size(uint16_t length, uint16_t min, uint16_t max,
1535 if (increment == 0) {
1542 /* Range of values */
1543 for (supp_size = min; supp_size <= max; supp_size += increment) {
1544 if (length == supp_size)
1551 initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports,
1552 uint8_t *enabled_cdevs)
1554 unsigned i, cdev_id, cdev_count, enabled_cdev_count = 0;
1555 const struct rte_cryptodev_capabilities *cap;
1556 enum rte_crypto_auth_algorithm cap_auth_algo;
1557 enum rte_crypto_auth_algorithm opt_auth_algo;
1558 enum rte_crypto_cipher_algorithm cap_cipher_algo;
1559 enum rte_crypto_cipher_algorithm opt_cipher_algo;
1562 cdev_count = rte_cryptodev_count();
1563 if (cdev_count == 0) {
1564 printf("No crypto devices available\n");
1568 for (cdev_id = 0; cdev_id < cdev_count && enabled_cdev_count < nb_ports;
1570 struct rte_cryptodev_qp_conf qp_conf;
1571 struct rte_cryptodev_info dev_info;
1573 struct rte_cryptodev_config conf = {
1574 .nb_queue_pairs = 1,
1575 .socket_id = SOCKET_ID_ANY,
1582 if (check_cryptodev_mask(options, (uint8_t)cdev_id))
1585 rte_cryptodev_info_get(cdev_id, &dev_info);
1587 /* Set cipher parameters */
1588 if (options->xform_chain == L2FWD_CRYPTO_CIPHER_HASH ||
1589 options->xform_chain == L2FWD_CRYPTO_HASH_CIPHER ||
1590 options->xform_chain == L2FWD_CRYPTO_CIPHER_ONLY) {
1591 /* Check if device supports cipher algo */
1593 opt_cipher_algo = options->cipher_xform.cipher.algo;
1594 cap = &dev_info.capabilities[i];
1595 while (cap->op != RTE_CRYPTO_OP_TYPE_UNDEFINED) {
1596 cap_cipher_algo = cap->sym.cipher.algo;
1597 if (cap->sym.xform_type ==
1598 RTE_CRYPTO_SYM_XFORM_CIPHER) {
1599 if (cap_cipher_algo == opt_cipher_algo) {
1600 if (check_type(options, &dev_info) == 0)
1604 cap = &dev_info.capabilities[++i];
1607 if (cap->op == RTE_CRYPTO_OP_TYPE_UNDEFINED) {
1608 printf("Algorithm %s not supported by cryptodev %u"
1609 " or device not of preferred type (%s)\n",
1610 rte_crypto_cipher_algorithm_strings[opt_cipher_algo],
1612 options->string_type);
1616 options->block_size = cap->sym.cipher.block_size;
1618 * Check if length of provided IV is supported
1619 * by the algorithm chosen.
1621 if (options->iv_param) {
1622 if (check_supported_size(options->iv.length,
1623 cap->sym.cipher.iv_size.min,
1624 cap->sym.cipher.iv_size.max,
1625 cap->sym.cipher.iv_size.increment)
1627 printf("Unsupported IV length\n");
1631 * Check if length of IV to be randomly generated
1632 * is supported by the algorithm chosen.
1634 } else if (options->iv_random_size != -1) {
1635 if (check_supported_size(options->iv_random_size,
1636 cap->sym.cipher.iv_size.min,
1637 cap->sym.cipher.iv_size.max,
1638 cap->sym.cipher.iv_size.increment)
1640 printf("Unsupported IV length\n");
1643 options->iv.length = options->iv_random_size;
1644 /* No size provided, use minimum size. */
1646 options->iv.length = cap->sym.cipher.iv_size.min;
1649 * Check if length of provided cipher key is supported
1650 * by the algorithm chosen.
1652 if (options->ckey_param) {
1653 if (check_supported_size(
1654 options->cipher_xform.cipher.key.length,
1655 cap->sym.cipher.key_size.min,
1656 cap->sym.cipher.key_size.max,
1657 cap->sym.cipher.key_size.increment)
1659 printf("Unsupported cipher key length\n");
1663 * Check if length of the cipher key to be randomly generated
1664 * is supported by the algorithm chosen.
1666 } else if (options->ckey_random_size != -1) {
1667 if (check_supported_size(options->ckey_random_size,
1668 cap->sym.cipher.key_size.min,
1669 cap->sym.cipher.key_size.max,
1670 cap->sym.cipher.key_size.increment)
1672 printf("Unsupported cipher key length\n");
1675 options->cipher_xform.cipher.key.length =
1676 options->ckey_random_size;
1677 /* No size provided, use minimum size. */
1679 options->cipher_xform.cipher.key.length =
1680 cap->sym.cipher.key_size.min;
1682 if (!options->ckey_param)
1683 generate_random_key(
1684 options->cipher_xform.cipher.key.data,
1685 options->cipher_xform.cipher.key.length);
1689 /* Set auth parameters */
1690 if (options->xform_chain == L2FWD_CRYPTO_CIPHER_HASH ||
1691 options->xform_chain == L2FWD_CRYPTO_HASH_CIPHER ||
1692 options->xform_chain == L2FWD_CRYPTO_HASH_ONLY) {
1693 /* Check if device supports auth algo */
1695 opt_auth_algo = options->auth_xform.auth.algo;
1696 cap = &dev_info.capabilities[i];
1697 while (cap->op != RTE_CRYPTO_OP_TYPE_UNDEFINED) {
1698 cap_auth_algo = cap->sym.auth.algo;
1699 if ((cap->sym.xform_type == RTE_CRYPTO_SYM_XFORM_AUTH) &&
1700 (cap_auth_algo == opt_auth_algo) &&
1701 (check_type(options, &dev_info) == 0)) {
1704 cap = &dev_info.capabilities[++i];
1707 if (cap->op == RTE_CRYPTO_OP_TYPE_UNDEFINED) {
1708 printf("Algorithm %s not supported by cryptodev %u"
1709 " or device not of preferred type (%s)\n",
1710 rte_crypto_auth_algorithm_strings[opt_auth_algo],
1712 options->string_type);
1717 * Check if length of provided AAD is supported
1718 * by the algorithm chosen.
1720 if (options->aad_param) {
1721 if (check_supported_size(options->aad.length,
1722 cap->sym.auth.aad_size.min,
1723 cap->sym.auth.aad_size.max,
1724 cap->sym.auth.aad_size.increment)
1726 printf("Unsupported AAD length\n");
1730 * Check if length of AAD to be randomly generated
1731 * is supported by the algorithm chosen.
1733 } else if (options->aad_random_size != -1) {
1734 if (check_supported_size(options->aad_random_size,
1735 cap->sym.auth.aad_size.min,
1736 cap->sym.auth.aad_size.max,
1737 cap->sym.auth.aad_size.increment)
1739 printf("Unsupported AAD length\n");
1742 options->aad.length = options->aad_random_size;
1743 /* No size provided, use minimum size. */
1745 options->aad.length = cap->sym.auth.aad_size.min;
1747 options->auth_xform.auth.add_auth_data_length =
1748 options->aad.length;
1751 * Check if length of provided auth key is supported
1752 * by the algorithm chosen.
1754 if (options->akey_param) {
1755 if (check_supported_size(
1756 options->auth_xform.auth.key.length,
1757 cap->sym.auth.key_size.min,
1758 cap->sym.auth.key_size.max,
1759 cap->sym.auth.key_size.increment)
1761 printf("Unsupported auth key length\n");
1765 * Check if length of the auth key to be randomly generated
1766 * is supported by the algorithm chosen.
1768 } else if (options->akey_random_size != -1) {
1769 if (check_supported_size(options->akey_random_size,
1770 cap->sym.auth.key_size.min,
1771 cap->sym.auth.key_size.max,
1772 cap->sym.auth.key_size.increment)
1774 printf("Unsupported auth key length\n");
1777 options->auth_xform.auth.key.length =
1778 options->akey_random_size;
1779 /* No size provided, use minimum size. */
1781 options->auth_xform.auth.key.length =
1782 cap->sym.auth.key_size.min;
1784 if (!options->akey_param)
1785 generate_random_key(
1786 options->auth_xform.auth.key.data,
1787 options->auth_xform.auth.key.length);
1789 /* Check if digest size is supported by the algorithm. */
1790 if (options->digest_size != -1) {
1791 if (check_supported_size(options->digest_size,
1792 cap->sym.auth.digest_size.min,
1793 cap->sym.auth.digest_size.max,
1794 cap->sym.auth.digest_size.increment)
1796 printf("Unsupported digest length\n");
1799 options->auth_xform.auth.digest_length =
1800 options->digest_size;
1801 /* No size provided, use minimum size. */
1803 options->auth_xform.auth.digest_length =
1804 cap->sym.auth.digest_size.min;
1807 retval = rte_cryptodev_configure(cdev_id, &conf);
1809 printf("Failed to configure cryptodev %u", cdev_id);
1813 qp_conf.nb_descriptors = 2048;
1815 retval = rte_cryptodev_queue_pair_setup(cdev_id, 0, &qp_conf,
1818 printf("Failed to setup queue pair %u on cryptodev %u",
1823 retval = rte_cryptodev_start(cdev_id);
1825 printf("Failed to start device %u: error %d\n",
1830 l2fwd_enabled_crypto_mask |= (((uint64_t)1) << cdev_id);
1832 enabled_cdevs[cdev_id] = 1;
1833 enabled_cdev_count++;
1836 return enabled_cdev_count;
1840 initialize_ports(struct l2fwd_crypto_options *options)
1842 uint8_t last_portid, portid;
1843 unsigned enabled_portcount = 0;
1844 unsigned nb_ports = rte_eth_dev_count();
1846 if (nb_ports == 0) {
1847 printf("No Ethernet ports - bye\n");
1851 /* Reset l2fwd_dst_ports */
1852 for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
1853 l2fwd_dst_ports[portid] = 0;
1855 for (last_portid = 0, portid = 0; portid < nb_ports; portid++) {
1858 /* Skip ports that are not enabled */
1859 if ((options->portmask & (1 << portid)) == 0)
1863 printf("Initializing port %u... ", (unsigned) portid);
1865 retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
1867 printf("Cannot configure device: err=%d, port=%u\n",
1868 retval, (unsigned) portid);
1872 /* init one RX queue */
1874 retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
1875 rte_eth_dev_socket_id(portid),
1876 NULL, l2fwd_pktmbuf_pool);
1878 printf("rte_eth_rx_queue_setup:err=%d, port=%u\n",
1879 retval, (unsigned) portid);
1883 /* init one TX queue on each port */
1885 retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
1886 rte_eth_dev_socket_id(portid),
1889 printf("rte_eth_tx_queue_setup:err=%d, port=%u\n",
1890 retval, (unsigned) portid);
1896 retval = rte_eth_dev_start(portid);
1898 printf("rte_eth_dev_start:err=%d, port=%u\n",
1899 retval, (unsigned) portid);
1903 rte_eth_promiscuous_enable(portid);
1905 rte_eth_macaddr_get(portid, &l2fwd_ports_eth_addr[portid]);
1907 printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
1909 l2fwd_ports_eth_addr[portid].addr_bytes[0],
1910 l2fwd_ports_eth_addr[portid].addr_bytes[1],
1911 l2fwd_ports_eth_addr[portid].addr_bytes[2],
1912 l2fwd_ports_eth_addr[portid].addr_bytes[3],
1913 l2fwd_ports_eth_addr[portid].addr_bytes[4],
1914 l2fwd_ports_eth_addr[portid].addr_bytes[5]);
1916 /* initialize port stats */
1917 memset(&port_statistics, 0, sizeof(port_statistics));
1919 /* Setup port forwarding table */
1920 if (enabled_portcount % 2) {
1921 l2fwd_dst_ports[portid] = last_portid;
1922 l2fwd_dst_ports[last_portid] = portid;
1924 last_portid = portid;
1927 l2fwd_enabled_port_mask |= (1 << portid);
1928 enabled_portcount++;
1931 if (enabled_portcount == 1) {
1932 l2fwd_dst_ports[last_portid] = last_portid;
1933 } else if (enabled_portcount % 2) {
1934 printf("odd number of ports in portmask- bye\n");
1938 check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
1940 return enabled_portcount;
1944 reserve_key_memory(struct l2fwd_crypto_options *options)
1946 options->cipher_xform.cipher.key.data = rte_malloc("crypto key",
1948 if (options->cipher_xform.cipher.key.data == NULL)
1949 rte_exit(EXIT_FAILURE, "Failed to allocate memory for cipher key");
1952 options->auth_xform.auth.key.data = rte_malloc("auth key",
1954 if (options->auth_xform.auth.key.data == NULL)
1955 rte_exit(EXIT_FAILURE, "Failed to allocate memory for auth key");
1957 options->iv.data = rte_malloc("iv", MAX_KEY_SIZE, 0);
1958 if (options->iv.data == NULL)
1959 rte_exit(EXIT_FAILURE, "Failed to allocate memory for IV");
1961 options->aad.data = rte_malloc("aad", MAX_KEY_SIZE, 0);
1962 if (options->aad.data == NULL)
1963 rte_exit(EXIT_FAILURE, "Failed to allocate memory for AAD");
1964 options->aad.phys_addr = rte_malloc_virt2phy(options->aad.data);
1968 main(int argc, char **argv)
1970 struct lcore_queue_conf *qconf;
1971 struct l2fwd_crypto_options options;
1973 uint8_t nb_ports, nb_cryptodevs, portid, cdev_id;
1974 unsigned lcore_id, rx_lcore_id;
1975 int ret, enabled_cdevcount, enabled_portcount;
1976 uint8_t enabled_cdevs[RTE_CRYPTO_MAX_DEVS] = {0};
1979 ret = rte_eal_init(argc, argv);
1981 rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
1985 /* reserve memory for Cipher/Auth key and IV */
1986 reserve_key_memory(&options);
1988 /* parse application arguments (after the EAL ones) */
1989 ret = l2fwd_crypto_parse_args(&options, argc, argv);
1991 rte_exit(EXIT_FAILURE, "Invalid L2FWD-CRYPTO arguments\n");
1993 /* create the mbuf pool */
1994 l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 512,
1995 sizeof(struct rte_crypto_op),
1996 RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
1997 if (l2fwd_pktmbuf_pool == NULL)
1998 rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
2000 /* create crypto op pool */
2001 l2fwd_crypto_op_pool = rte_crypto_op_pool_create("crypto_op_pool",
2002 RTE_CRYPTO_OP_TYPE_SYMMETRIC, NB_MBUF, 128, MAXIMUM_IV_LENGTH,
2004 if (l2fwd_crypto_op_pool == NULL)
2005 rte_exit(EXIT_FAILURE, "Cannot create crypto op pool\n");
2007 /* Enable Ethernet ports */
2008 enabled_portcount = initialize_ports(&options);
2009 if (enabled_portcount < 1)
2010 rte_exit(EXIT_FAILURE, "Failed to initial Ethernet ports\n");
2012 nb_ports = rte_eth_dev_count();
2013 /* Initialize the port/queue configuration of each logical core */
2014 for (rx_lcore_id = 0, qconf = NULL, portid = 0;
2015 portid < nb_ports; portid++) {
2017 /* skip ports that are not enabled */
2018 if ((options.portmask & (1 << portid)) == 0)
2021 if (options.single_lcore && qconf == NULL) {
2022 while (rte_lcore_is_enabled(rx_lcore_id) == 0) {
2024 if (rx_lcore_id >= RTE_MAX_LCORE)
2025 rte_exit(EXIT_FAILURE,
2026 "Not enough cores\n");
2028 } else if (!options.single_lcore) {
2029 /* get the lcore_id for this port */
2030 while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
2031 lcore_queue_conf[rx_lcore_id].nb_rx_ports ==
2032 options.nb_ports_per_lcore) {
2034 if (rx_lcore_id >= RTE_MAX_LCORE)
2035 rte_exit(EXIT_FAILURE,
2036 "Not enough cores\n");
2040 /* Assigned a new logical core in the loop above. */
2041 if (qconf != &lcore_queue_conf[rx_lcore_id])
2042 qconf = &lcore_queue_conf[rx_lcore_id];
2044 qconf->rx_port_list[qconf->nb_rx_ports] = portid;
2045 qconf->nb_rx_ports++;
2047 printf("Lcore %u: RX port %u\n", rx_lcore_id, (unsigned)portid);
2050 /* Enable Crypto devices */
2051 enabled_cdevcount = initialize_cryptodevs(&options, enabled_portcount,
2053 if (enabled_cdevcount < 0)
2054 rte_exit(EXIT_FAILURE, "Failed to initialize crypto devices\n");
2056 if (enabled_cdevcount < enabled_portcount)
2057 rte_exit(EXIT_FAILURE, "Number of capable crypto devices (%d) "
2058 "has to be more or equal to number of ports (%d)\n",
2059 enabled_cdevcount, enabled_portcount);
2061 nb_cryptodevs = rte_cryptodev_count();
2063 /* Initialize the port/cryptodev configuration of each logical core */
2064 for (rx_lcore_id = 0, qconf = NULL, cdev_id = 0;
2065 cdev_id < nb_cryptodevs && enabled_cdevcount;
2067 /* Crypto op not supported by crypto device */
2068 if (!enabled_cdevs[cdev_id])
2071 if (options.single_lcore && qconf == NULL) {
2072 while (rte_lcore_is_enabled(rx_lcore_id) == 0) {
2074 if (rx_lcore_id >= RTE_MAX_LCORE)
2075 rte_exit(EXIT_FAILURE,
2076 "Not enough cores\n");
2078 } else if (!options.single_lcore) {
2079 /* get the lcore_id for this port */
2080 while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
2081 lcore_queue_conf[rx_lcore_id].nb_crypto_devs ==
2082 options.nb_ports_per_lcore) {
2084 if (rx_lcore_id >= RTE_MAX_LCORE)
2085 rte_exit(EXIT_FAILURE,
2086 "Not enough cores\n");
2090 /* Assigned a new logical core in the loop above. */
2091 if (qconf != &lcore_queue_conf[rx_lcore_id])
2092 qconf = &lcore_queue_conf[rx_lcore_id];
2094 qconf->cryptodev_list[qconf->nb_crypto_devs] = cdev_id;
2095 qconf->nb_crypto_devs++;
2097 enabled_cdevcount--;
2099 printf("Lcore %u: cryptodev %u\n", rx_lcore_id,
2103 /* launch per-lcore init on every lcore */
2104 rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, (void *)&options,
2106 RTE_LCORE_FOREACH_SLAVE(lcore_id) {
2107 if (rte_eal_wait_lcore(lcore_id) < 0)